Job description
• Select the correct crane and accessories for the specific task
• Prepare the lift plan and ensure the required controls are in place
• Ensure that the lifting equipment is maintained, examined and appropriate for use
• Check that load integrity and stability are satisfactory
• Ensure that people involved are competent for performing their task, aware of the task and procedures to be followed,
and aware of their responsibilities
• Ensure competent supervisor available should the Appointed Person delegate his duties of part thereof to others
• Ensure all necessary test certificates and other documents are available
• Ensure all other statutory requirements and any necessary work permits are in place
• Identify all hazards and restricted areas
• Ensure that the person directing crane movements (Signaler / Banksman) is readily identifiable to the crane operator
by wearing high visibility clothing or distinguishing markings
• Ensure that the workplace is provided with adequate lighting for night lifting
• Brief people involved in or affected by the lift
• Ensure the lift is carried out following the plan. Suspend the lift if changes or conditions (e.g. wind) occur that would
cause a deviation from the plan
• Monitor the performance of all involved personnel to ensure that adequate standards of performance are maintained
• Manage any special issues such as language barriers and new/inexperienced staff
• Check that there is no deviation from standards for routine lifts
• Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, e.g., helicopter
operations, ballast control, other cranes
Responsibilities:
• Select the correct crane and accessories for the specific task
• Prepare the lift plan and ensure the required controls are in place
• Ensure that the lifting equipment is maintained, examined and appropriate for use
• Check that load integrity and stability are satisfactory
• Ensure that people involved are competent for performing their task, aware of the task and procedures to be followed,
and aware of their responsibilities
• Ensure competent supervisor available should the Appointed Person delegate his duties of part thereof to others
• Ensure all necessary test certificates and other documents are available
• Ensure all other statutory requirements and any necessary work permits are in place
• Identify all hazards and restricted areas
• Ensure that the person directing crane movements (Signaler / Banksman) is readily identifiable to the crane operator
by wearing high visibility clothing or distinguishing markings
• Ensure that the workplace is provided with adequate lighting for night lifting
• Brief people involved in or affected by the lift
• Ensure the lift is carried out following the plan. Suspend the lift if changes or conditions (e.g. wind) occur that would
cause a deviation from the plan
• Monitor the performance of all involved personnel to ensure that adequate standards of performance are maintained
• Manage any special issues such as language barriers and new/inexperienced staff
• Check that there is no deviation from standards for routine lifts
• Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, e.g., helicopter
operations, ballast control, other cranes
Qualifications:
1. 3 years Diploma in Mechanical Engineering or equivalent
2. 4-days Appointed Person Course by an ADNOC Offshore
Approved Training Provider is an added value
3. Minimum 5 years’ experience of offshore and onshore
lifting operations in a similar role in oil & gas industry
الوصف الوظيفي
• اختر الرافعة والملحقات الصحيحة للمهمة المحددة
• اعداد خطة الرفع والتأكد من وجود عناصر التحكم المطلوبة
• التأكد من صيانة معدات الرفع وفحصها وملاءمتها للاستخدام
• التحقق من سلامة وثبات الحمولة بشكل مرضٍ
• التأكد من أن الأشخاص المشاركين كفوؤون لأداء مهمتهم، مدركون للمهمة والإجراءات التي يجب اتباعها،
وواعيون بمسؤولياتهم
• التأكد من وجود مشرف كفؤ متاح في حال قام الشخص المُعين بتفويض جزء من واجباته للآخرين
• التأكد من توفر جميع شهادات الاختبار والوثائق الأخرى اللازمة
• التأكد من استيفاء جميع المتطلبات النظامية وأي تصاريح عمل لازمة
• تحديد جميع المخاطر والمناطق المحظورة
• التأكد من أن الشخص الموجه لحركات الرافعة (المشير / البنكسان) يمكن التعرّف عليه بسهولة من قبل مشغل الرافعة
بارتداء ملابس عالية الرؤية أو علامات مميزة
• التأكد من توفير إضاءة كافية في مكان العمل للرفع ليلاً
• إطلاع الأشخاص المشاركين في الرفع أو المتأثرين به
• التأكد من تنفيذ الرفع وفق الخطة. تعليق الرفع إذا حدثت تغييرات أو ظروف (مثل الرياح) تؤدي إلى
انحراف عن الخطة
• رصد أداء جميع الأفراد المشاركين لضمان الحفاظ على معايير أداء كافية
• إدارة أي قضايا خاصة مثل حواجز اللغة والموظفين الجدد/غير المتمرسين
• التحقق من عدم وجود انحراف عن المعايير للرفع الروتيني
• السماح بالعمليات المتزامنة التي قد تؤثر على أو تتأثر بالرفع، مثل عمليات الهليكوبتر، التحكم في التوازن، رافعات أخرى
المسؤوليات:
• اختيار الرافعة والملحقات الصحيحة للمهمة المحددة
• اعداد خطة الرفع والتأكد من وجود عناصر التحكم المطلوبة
• التأكد من أن معدات الرفع تُصان وتفحص وتكون مناسبة للاستخدام
• التحقق من سلامة وثبات الحمولة بشكل مرضٍ
• التأكد من أن الأشخاص المشاركين كفوؤون لأداء مهمتهم، مدركون للمهمة والإجراءات التي يجب اتباعها،
وواعيون بمسؤولياتهم
• التأكد من وجود مشرف كفؤ متاح في حال قام الشخص المُعين بتفويض جزء من واجباته للآخرين
• التأكد من توفر جميع شهادات الاختبار والوثائق الأخرى اللازمة
• التأكد من استيفاء جميع المتطلبات النظامية وأي تصاريح عمل لازمة
• تحديد جميع المخاطر والمناطق المحظورة
• التأكد من أن الشخص الموجه لحركات الرافعة (المشير / البنكسان) يمكن التعرّف عليه بسهولة من قبل مشغل الرافعة
بارتداء ملابس عالية الرؤية أو علامات مميزة
• التأكد من توفير إضاءة كافية في مكان العمل للرفع ليلاً
• إطلاع الأشخاص المشاركين في الرفع أو المتأثرين به
• التأكد من تنفيذ الرفع وفق الخطة. تعليق الرفع إذا حدثت تغييرات أو ظروف (مثل الرياح) تؤدي إلى
انحراف عن الخطة
• رصد أداء جميع الأفراد المشاركين لضمان الحفاظ على معايير أداء كافية
• إدارة أي قضايا خاصة مثل حواجز اللغة والموظفين الجدد/غير المتمرسين
• التحقق من عدم وجود انحراف عن المعايير للرفع الروتيني
• السماح بالعمليات المتزامنة التي قد تؤثر على أو تتأثر بالرفع، مثل عمليات الهليكوبتر، التحكم في التوازن، رافعات أخرى
المؤهلات:
1. دبلوم لمدة 3 سنوات في الهندسة الميكانيكية أو ما يعادلها
2. دورة الشخص المُعين لمدة 4 أيام من مزود تدريب معتمد من ADNOC Offshore تعد قيمة مضافة
3. خبرة لا تقل عن 5 سنوات في رفع العمليات البحرية والبرية في دور مشابه في صناعة النفط والغاز