Job description

Company Description

Emirates Electrical & Instrumentation Company LLC is a proud member of the Juman Energy Group.
For almost 20 years, we have made vital contributions to the Oil & Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.

1. Position Purpose

The Lead Testing & Commissioning Engineer shall lead the complete pre-commissioning, commissioning, start-up, performance testing and handover of the Project. The primary process package is the instrument air and plant air compressor system; however, successful commissioning depends on extensive integration with electrical power systems, instrumentation, package PLC, DCS/ESD/F&G, mechanical and piping systems, utilities, brownfield tie-ins and offshore operations. The role is therefore multidisciplinary and shall coordinate all relevant disciplines, OEMs, subcontractors and Company representatives to achieve safe and timely system start-up.

2. Key Accountabilities

• Own and lead the overall testing and commissioning strategy, systemization, execution plan and handover process for the complete Project.
• Lead commissioning of compressor and dryer packages, including mechanical run-in, electrical energization, instrumentation calibration, logic validation, functional testing and performance testing.
• Act as the single focal point for commissioning interfaces among Engineering, Procurement, Construction, OEMs, subcontractors, ADNOC Offshore Operations and the project management team.
• Ensure all systems and subsystems are mechanically complete, safe, properly documented and ready before energization, introduction of utilities or start-up.
• Drive closure of punch items, technical queries, interface issues and commissioning constraints to meet project milestones.

3. Detailed Roles and Responsibilities

3.1 Commissioning Management and Planning

• Develop the overall Pre-Commissioning, Commissioning, Start-up and Performance Test Plan for the project.
• Define commissioning systems, subsystems, boundaries, priorities, turnover sequence and required completion milestones.
• Prepare and maintain the commissioning schedule, resource plan, vendor mobilization plan and offshore execution sequence in coordination with Planning and Construction.
• Establish commissioning readiness criteria, system handover requirements, Mechanical Completion (MC), Ready for Commissioning (RFC), Ready for Start-up (RFSU) and final acceptance requirements.
• Prepare and maintain the Commissioning Register, system/subsystem status tracker, punch list register, constraint register, interface register and vendor attendance schedule.
• Coordinate commissioning inputs for shutdown planning, brownfield tie-ins, SIMOPS, offshore campaigns and marine/logistics requirements.
• Conduct commissioning readiness reviews, daily coordination meetings and system walkdowns with all stakeholders.

3.2 Compressor and Mechanical Package Commissioning

• Lead pre-commissioning and commissioning of instrument air and plant air compressors, dryers, filters, receivers, after-coolers, drains and associated auxiliaries.
• Verify package installation, alignment, lubrication, cooling, ventilation, cleanliness, flushing, leak testing and readiness for initial start.
• Coordinate compressor OEM activities including preservation release, pre-start inspection, first start, no-load/load trials, vibration checks, capacity testing and reliability run.
• Validate compressor loading/unloading sequence, duty/standby operation, automatic changeover, pressure control, dryer regeneration and package operating philosophy.
• Coordinate piping blowdown, flushing, pressure/leak testing, reinstatement, line-up and introduction of air to the existing platform networks.
• Lead package performance testing against approved datasheets, guaranteed capacity, pressure, dew point, power consumption and other contractual performance criteria.
• Ensure safe interface with existing instrument air and plant air systems during cutover and transition.

3.3 Electrical Testing and Energization

• Lead testing, energization and functional checks for all electrical systems supporting the project package, including HV/LV switchgear, MCCs, VFDs, UPS/DC systems, distribution boards, transformers and control panels as applicable.
• Review and approve energization procedures, switching programs, electrical isolation plans, LOTO requirements and energization certificates.
• Ensure completion and acceptance of insulation resistance, continuity, earthing, contact resistance, primary/secondary injection, protection relay, functional and inter-trip tests.
• Verify protection settings, relay coordination, motor starting requirements, control power availability and interfaces with existing electrical systems.
• Lead motor solo runs, rotation checks, VFD tuning, current/vibration monitoring and load testing of compressor motors and auxiliaries.
• Coordinate electrical OEM support and resolve issues related to switchgear, MCC, VFD, ECMS/PMS and package power/control interfaces.

3.4 Instrumentation, Control and ICSS Integration

• Lead calibration, loop checking and functional testing of pressure, temperature, flow, dew point, vibration and other package/process instruments.
• Ensure completion of instrument installation checks, impulse line verification, tubing leak tests, instrument air connections, range/settings verification and calibration records.
• Review and validate I/O lists, loop diagrams, instrument index, alarm and trip set points, control narratives, Cause & Effect matrices and shutdown philosophy.
• Lead package PLC, DCS, ESD, F&G, ECMS/PMS and other ICSS interface testing, including hardwired and communication signals.
• Coordinate Factory Acceptance Tests (FAT), Integrated FAT, Site Acceptance Tests (SAT), loop tests, logic tests and end-to-end functional tests.
• Validate compressor start permissive, trips, alarms, sequencing, duty/standby changeover, remote/local operation and emergency shutdown response.
• Coordinate DCS graphics, alarm displays, trends, historian points and operator interface validation with ADNOC Operations.

3.5 Engineering, Construction and Vendor Interface

• Review engineering deliverables from a commissioning and operability perspective, including P&IDs, SLDs, layouts, cable schedules, loop drawings, logic diagrams, Cause & Effect, datasheets and vendor documents.
• Identify commissioning requirements early and ensure they are incorporated into design, procurement, construction and vendor scope.
• Provide input to constructability, operability, maintainability, HAZOP/PHA, design reviews, 3D model reviews and shutdown/tie-in studies.
• Coordinate resolution of design changes, field changes, technical queries, NCRs, interface gaps and vendor deviations affecting commissioning.
• Confirm preservation, storage, installation and pre-commissioning requirements for vendor packages and long-lead equipment.
• Ensure adequate availability of commissioning spares, consumables, temporary facilities, test equipment, special tools and vendor specialists.

3.6 Offshore Brownfield, SIMOPS and Start-up Coordination

• Plan and coordinate offshore commissioning activities in live operating facilities with minimum disruption to existing operations.
• Prepare detailed tie-in, cutover, isolation, de-isolation, reinstatement and start-up sequences in coordination with ADNOC Operations.
• Ensure compliance with PTW, SIMOPS, LOTO, energy isolation, electrical safety rules and offshore work control requirements.
• Participate in job safety analysis, task risk assessments, toolbox talks, pre-start-up safety reviews and operational readiness reviews.
• Coordinate offshore manpower, rotation, access, logistics, material movement and vendor/OEM attendance for commissioning campaigns.
• Provide immediate technical leadership for troubleshooting and safe recovery from failed tests, trips or start-up issues.

3.7 Documentation, Completion and Handover

• Prepare, review and obtain approval for pre-commissioning, commissioning, energization, functional test, start-up and performance test procedures.
• Ensure complete and accurate ITRs, check sheets, loop folders, FAT/SAT reports, test certificates, calibration records and commissioning dossiers.
• Manage MC, RFC, RFSU, System Completion and final handover dossiers in accordance with project and ADNOC requirements.
• Coordinate red-line markups, as-built drawings, O&M manuals, spare parts records, vendor data books and final turnover documentation.
• Lead punch categorization and closure, ensuring no safety-critical or start-up-blocking punch remains open before commissioning.
• Prepare daily, weekly and monthly commissioning reports, progress curves, look-ahead plans, risk/constraint reports and management updates.
• Coordinate training, familiarization and final handover to ADNOC Operations and Maintenance teams.

4. HSE and Quality Responsibilities

• Demonstrate visible HSE leadership and stop any unsafe testing, energization or start-up activity.
• Ensure all commissioning works comply with ADNOC HSE requirements, Electrical Safety Rules, PTW, LOTO, SIMOPS and project procedures.
• Confirm calibrated and certified test equipment is used and all test records are traceable.
• Ensure commissioning activities comply with approved Inspection and Test Plans, method statements and quality requirements.
• Lead incident/near-miss reporting, technical investigation and corrective action for commissioning-related events.

5. Team Leadership

• Lead and coordinate commissioning engineers, discipline engineers, supervisors, technicians, vendors, OEM specialists and subcontractor personnel.
• Allocate responsibilities by system and discipline and ensure clear ownership of commissioning deliverables and field activities.
• Mentor team members, provide technical guidance and maintain effective communication between office, yard and offshore teams.
• Forecast manpower and specialist requirements and support timely mobilization, offshore certification and competency verification.
• Promote collaborative working with ADNOC representatives while protecting project scope, schedule, quality and contractual requirements.

4. Key Deliverables

• Approved Commissioning Execution Plan and system/subsystem breakdown.
• Commissioning procedures, energization plans, test packs and performance test procedures.
• Commissioning schedule, resource/vendor mobilization plan and readiness tracker.
• MC/RFC/RFSU/System Completion dossiers and punch-list closeout records.
• Daily/weekly/monthly progress reports and commissioning risk/constraint registers.
• Final handover dossiers, as-built documentation, operating records and training completion.

Minimum Qualification and Experience:

• Bachelor's degree in Electrical Engineering, Instrumentation & Control Engineering, Mechanical Engineering or equivalent. An Electrical or Instrumentation background with strong compressor/mechanical package commissioning experience is preferred.
• Minimum 16 years of experience in Oil & Gas EPC projects, with at least 8 years in testing, commissioning and start-up leadership roles.
• Demonstrated experience in commissioning compressor packages and associated electrical, instrumentation, control and utility systems.
• Substantial offshore brownfield experience, including live-plant tie-ins, shutdowns, SIMOPS and start-up activities.
• Experience with ADNOC Offshore or similar major operating companies is strongly preferred.
• Proven experience coordinating package OEMs, electrical vendors, ICSS vendors, construction teams and operations personnel.
• Ability to independently lead multidisciplinary commissioning from engineering review through final handover.

Required Technical Competencies:

• Compressor package operation and commissioning, including rotary screw/centrifugal compressor systems, dryers and air treatment equipment.
• HV/LV electrical systems, switchgear, MCCs, VFDs, motors, UPS/DC systems, protection and energization.
• Instrumentation calibration, loop checking, package PLC, DCS/ESD/F&G integration, Cause & Effect and functional testing.
• Mechanical completion, systemization, commissioning dossiers, punch management and turnover processes.
• Brownfield tie-ins, isolation philosophy, cutover planning, SIMOPS and offshore commissioning execution.
• Ability to read and interpret P&IDs, SLDs, schematics, wiring diagrams, loop drawings, logic diagrams and vendor documentation.
• Knowledge of ADNOC standards, IEC, ISA, API, NFPA and applicable hazardous-area requirements.

Software and Tools:

• MS Office, advanced Excel-based trackers and commissioning reporting tools.
• EDMS/Aconex/Wrench or similar document management systems.
• Commissioning management or completion systems such as WinPCS, ICAPS, Zenator, CoConsole or equivalent.
• ETAP and electrical testing tools such as Omicron, Megger and Fluke are desirable.
• PLC/DCS diagnostic and configuration exposure relevant to ABB, Siemens, Schneider, Rockwell or other project systems is desirable.
• AVEVA E3D/PDMS, Navisworks or similar model review tools are desirable.

Personal Attributes:

• Strong leadership, ownership and decision-making capability in high-pressure site and offshore environments.
• Excellent multidisciplinary coordination, communication, reporting and stakeholder-management skills.
• Systematic approach to safety, quality, documentation, troubleshooting and closeout.
• Ability to work across engineering, construction, commissioning and operations teams and manage multiple vendors simultaneously.
• Willingness and medical fitness to travel and work offshore as required.