وصف الوظيفة
الغرض من الوظيفة
المساهمة في تطوير وتنفيذ البرنامج البيئي في قسم العمليات مع تفسير مجموعة واسعة من أنشطة التدقيق البيئي والتفتيش والتحقيق والاختبار في مختلف العمليات لتغطية قضايا مثل قياس الملوثات الهوائية، اختبار العوامل الفيزيائية، (الضوضاء)، جودة الهواء، جودة الملوثات الناتجة، التعامل مع الإدارة والتخطيط للنفايات السامة والخطرة، وغيرها، بهدف ضمان المحافظة على البيئة عند المستوى الأمثل من السلامة والصحة والمعايير البيئية.
· الإبلاغ عن الظروف غير المرغوبة وما يترتب عليها مع التوصيات للتحسين من أجل تحقيق أهداف سياسة القسم في الحماية البيئية. تنسيق أنشطة تنفيذ نظام الإدارة البيئية (معيار ISO-14001) في الموقع
· أداء وظائف استشارية على المستوى الذي تتيحه الإدارة. تنسيق جميع الأنشطة التشغيلية في منطقته، مع مراعاة زيادة الترابط والتبعية مع مرافق المصنع الجديدة/المناطق الأخرى
المسؤوليات الأساسية
· بشكل يومي، يراقب تصريفات المصنع (التوهج، الانبعاثات والمخلفات السائلة إلى البيئة ويبلغ الإدارة بالأسباب لأي انحراف وتحسين.
· يطبق ويقيّم ويقدم المشورة المهنية بشأن البرامج البيئية بما في ذلك نظام الإدارة البيئية (ISO 14001) للسيطرة على جميع العوامل البيئية المعروفة أو المشتبه في كونها ضارة بالصحة والبيئة.
· وضع ومراجعة الحسابات لتحديد كميات التوهج والانبعاثات.
· تطوير وتقديم الدعم لإنشاء أنظمة القياس والرصد والبرمجيات الخاصة بالتوهج والانبعاثات.
· الإشراف وتقييم البيانات المولدة لعمليات تقارير بيئية يومية وشهرية وسنوية.
· التخطيط والتوجيه والمساعدة في إجراء رصد جودة الهواء المحيط وقياس انبعاثات المصدر لتحديد المصادر الرئيسية للملوثات المحمولة جواً
· يوصي بمعدات وأدوات أخذ عينات بيئية مناسبة للحماية والإدارة البيئية ويشرف ويدرب فرق الميدان في جميع قضايا حماية وإدارة البيئة.
· يشارك وينصح في التخطيط البيئي، وإعداد الميزانية ونطاق العمل.
· يشارك وينصح في إعداد تقرير الاستدامة.
· ينصح بإدارة النفايات، وإعداد توقعات النفايات السنوية والتنسيق مع مختلف الأقسام.
· ينصح بمعالجة الملوثات وأخذ عينات وتحليل الصرف.
· يراجع عمليات التشغيل وأداء المصنع في مجالات رئيسية لضمان تقديم دعم تقني كاف لقسم العمليات لحل المشكلات والحفاظ على موثوقية عالية للمصنع.
· يقود/يشارك في مراجعات السلامة، ودراسات HAZOP، ومراجعات HSE، ودراسات وتقييمات.
· يراجع ويرشد تحليل توقف المصنع، والتحقيقات في الحوادث والتقارير المرتبطة بها.
· يخطط وينسق دعم العمليات خلال فترات صيانة المصنع بما في ذلك التحضير للإيقاف، واستبدال/فحص المحفز للمعدات الرئيسية وتقديم مدخلات لإصدار تقرير overhaul للعمليات وتقديم المساعدة في بدء التشغيل، ويحافظ على التواصل والتنسيق المناسب مع ADNOC Offshore وADNOC Gas Processing وADNOC فيما يخص إمدادات الغاز وبقية المواضيع الفنية.
· يتعاون مع قسم هندسة العمليات بالإضافة إلى المستشارين/البائعين الخارجيين في المشكلات المزمنة والمعقدة أو المحتملة.
· يراجع ملف التوهج اليومي واقتراحات إجراءات الإصلاح لضمان الحد من التوهج
· يراجع ويناقش ويُعطي توجيهات TLOS بشأن الحزم، وجدول المشروع الجديد وتقطيع النفقات.
· يحدد فرص تحسين المصنع ويتيح التعديل لتحسين التكلفة والتوافر وموثوقية المصنع
· تحليل أداء المصنع وتحقيقات الفشل في المناطق الرئيسية لضمان دعم تغيّب التشغيل لحل المشكلات والحفاظ على موثوقية مرتفعة للمصنع
· ينصح قسم الصيانة للمصنع والهندسة والأقسام الأخرى في المسائل الفنية المعقدة ذات الصلة بالعمليات.
· يعمل كخبير موضوعي في لجان تحليل GAP لتقييم العاملين للترقية.
· تنسيق والتواصل مع الأقسام الأخرى فيما يتعلق بأنشطة العمل في مناطق المصنع المعينة
· يساعد فرق المناوبة أثناء الطوارئ وفقاً لإجراء الاستجابة للطوارئ في عزل آمن واستعادة الوضع الطبيعي.
· يراقب حالة جميع وحدات منطقته لضمان صيانة جميع المعدات في أفضل حالة من حيث السلامة والأداء مع التأكيد على تقليل الانبعاثات البيئية والتوهج.
· يوجه فرق تشغيل التناوب في تطبيق نظام HSEMS الغازي لشركة ADNOC والعمليات تحت ملكيته. يعزز الوعي بالسلامة والصحة والبيئة بين فريقه ويحافظ على معايير السلامة أثناء أنشطة العمل من قبل أقسام أخرى
· يضمن الامتثال لجميع أدوات الإدارة مثل AIPS HSECES، RCM، DGS، MOC وغيرها، (التأكد من توفير جميع المستندات الداعمة المطلوبة والمتابعة في تقصير الثغرات).
· يضمن الفعالية في تشغيل نظام العامل المرتبط، يراجع ويبادر باتخاذ الإجراءات المناسبة بناءً على نتائج الرصد الميداني.
· يشارك في تقييم أداء الأفراد، إجراء المقابلات الفنية، إعداد وحفظ سجل مناوبة تفصيلي
المؤهلات والخبرة والمعرفة والمهارات
أقل مؤهل
· درجة البكالوريوس في الهندسة الكيميائية/البتروكيماوية/الميكانيكية أو ما يعادلها
الخبرة الدنيا والمعرفة والمهارات
· 8 سنوات من الخبرة في صناعة تكرير النفط أو الغاز/البتروكيماويات وعلى الأقل 3 سنوات في وظيفة إشرافية عليا مع خبرة نظام التحكم DCS
· معرفة دقيقة بالتعليمات السارية وإجراءات التشغيل الخاصة بالمنطقة المعينة
· مهارات قوية في حل المشكلات واتخاذ القرار مع قدرة تحليلية مثبتة
· مهارات تنسيق جيدة
· مهارات تقنية معلومات جيدة
· مهارات تواصل بشري وشفهي جيدة
· معرفة جيدة باللغة الإنجليزية كتابة وتحدثاً
الشهادات المهنية
· دورة مدقق رائد ومٌعتمد ISO50001 أو ISO-BMS
· المحاكاة/النمذجة المتقدمة للعمليات (ASPEN HYSYS)
· قائد HAZOP معتمد
· ميسر RCA/SIL معتمد
· شهادة في مهارات اتخاذ القرار، تحليل المخاطر، HAZOP، HAZID.
Job description
JOB PURPOSE
Provide input to develop and implement the Environmental Program in operations department with interpretation of a wide range of environmental audit, inspection, investigation and testing activities at various operations to cover such issues as airborne contaminants measurement, physical agents testing, (noise,) air quality, effluent quality, handling and management of toxic and hazardous waste, etc., with a view to ensure that environment is maintained at the optimum level of safety , health and environmental standards.
· Report undesirable conditions and implications thereof together with recommendations for improvement in order to achieve departmental Policy objectives on Environmental Protection. Coordinate environmental management system (IS0-14001 Standard) implementation activities at site
· Perform advisory functions at the level established by Management. Coordinate all operational activities in his area, in consideration with increased interconnections & inter dependence with the new plant facilities/other areas
KEY ACCOUNTABILITIES
· On daily basis, carries out monitoring of plant discharges (flaring, emissions and liquid effluents to environment and report to management with reasons for any deviation and improvement.
· Implements, evaluates and provides professional advice on Environmental programmes including environmental management system (ISO 14001) for control of all environmental factors that are known to be or suspected of being hazardous to health and environment.
· Establish and review calculations for quantification of flaring & emissions.
· Develop and provide support to the establishment of measurement and monitoring systems & software for flaring & emissions.
· Supervise and evaluate the data generated for daily, monthly, and annual environmental reports.
· Plans, advise and assists in conducting environmental ambient air quality monitoring and emission source testing to determine major sources of airborne contaminants
· Recommends appropriate environmental sampling equipment and instruments for the environmental protection and management and supervises and trains field staff on all environment protection and management issues.
· Participates and advises in environmental planning, budget and scope of work preparation.
· Participates and advises in Sustainability report preparation.
· Advises on waste management, prepares annual waste projection and coordinates with various departments.
· Advises on effluent treatment and sampling and analysis of effluent.
· Review operational processes and Plant performance in key areas to ensures adequate technical support to Operations Division to resolve problems and maintain high plant reliability.
· Lead/ Participates in integrity reviews, HAZOP studies, HSE reviews, studies and assessments.
· Reviews and guides Plant trip analysis, incident investigations and associated reports .
· Plans and co-ordinates the Operations support during the Plant Overhauls including shut-down preparation, Catalyst replacement/ Inspection of major equipment and provide inputs for issuance of Operations Overhaul Report and start-up assistance Maintains proper communication/ liaising with ADNOC Offshore, ADNOC Gas Processing and ADNOC with regards to gas supplies and other item related to technical activities.
· Coordinates with Process Engineering Division as well as outside consultant/vendors on chronic and complex difficulties or potential problems.
· Reviews daily flaring profile and proposals for remedial actions to ensure minimum flaring
· Review, discusses and advises TLOS on packages, new project schedule and expenditure phasing.
· Identify plant improvement opportunities and facilitate the modification to improve the cost, availability and reliability of plant
· Plant performance analysis and failure investigations in key areas to ensure support to shift Operations to resolve problems and maintain high plant reliability
· Advises Plant Maintenance Dept., Engineering and other divisions on complex technical matters related to Operations.
· Perform as subject matter Expert in GAP analysis panels for evaluating personnel for promotion.
· Co-ordinate and liaise with other departments regarding work activities in assigned Plant areas
· Assist shift teams during emergencies as per Emergency Response Procedure in safe isolation and restoration of normalcy.
· Monitor status for all units within his area, to ensure that all of the equipment is maintained in the best condition in relation to safety and performance giving emphasis to minimize environmental emissions and flaring.
· Direct shift operation crews in the application of the ADNOC GAS HSEMS system and processes under his ownership. Promote HSE awareness among his team and maintain good safety standards during work activities by other departments
· Ensure compliance to all management tools like AIPS HSECES, RCM, DGS, MOC etc., (ensure all supporting documents required are provided and follow-up on short comings).
· Ensure effective functioning of Connected worker System, review and initiate appropriate actions based on the field monitoring results.
· Participate in the performance appraisal of personnel, conducting technical interviews, preparing and maintaining a detailed shift log
QUALIFICATIONS, EXPERIENCE, KNOWLEDGE & SKILLS
Minimum Qualification
· Bachelor Degree in Chemical/Petrochemical/Mechanical Engineering or equivalent
Minimum Experience & Knowledge & Skills
· 8 years of experience in the oil refining or gas/ petrochemical industry at least 3 years in a Senior Supervisory capacity with DCS Control System experience
· Thorough knowledge of the Standing Instructions and Operating procedures pertaining to the assigned Area
· Excellent problem solving and decision-making skills with proven analytical ability
· Good coordination skills
· Good IT Skills
· Good interpersonal and communication skills
· Good knowledge of written and spoken English
Professional Certifications
· Lead auditor course and certified for ISO50001 or ISO-BMS
· Advanced Process Simulation/Modelling (ASPEN HYSYS)
· Certified HAZOP Leader
· Certified RCA/SIL Facilitator
· Certification in Decision making skills, Risk analysis, HAZOP, HAZID.