JOB PURPOSE
The Specialist Process Engineer is responsible for the technical assurance & compliance of the CONTRACTOR to the COMPANY’s specific discipline scope, process specifications, respective governing codes & standards & industry best practices.
To ensure satisfactory levels of HSE performance from Contractor with respect to all engineering activities.
To monitor and approve process engineering procedures, plans and schedules for execution of the process engineering work scope associated with the Project.
Monitor, witness and approve (as required) contractor and licensor process engineering/design activities for the works.
Coordinate and trace all exchange of process documents between IPMT and contractors.
Single point of contact with Licensor, contractor and Company regarding process design of the units.
Supervises, IPMT process Engineering Team within scope assigned.
Provide work direction to, IPMT process Engineering Team within scope assigned.
Job Specific Accountabilities
Technical Assurance
Technical Integrity: Verifying & achieving technical Integrity of respective project deliverable(s) in compliance with:
Legislation and Regulatory Commitments
Codes and Standards
Certification
Basis of Design
Monitor and check the EPC Contractor’s technical deliverables in order to obtain the required Quality, with in time and budget.
Attend internal progress and engineering meetings as required with the Contractors and Licensors.
To supervise and ensure the design works of Vendor and Contractor are in accordance with the scope of work and project technical specifications.
Ensure process engineering schedules are consistent with Company overall Project requirements.
Support COMPANY in the execution of the works.
Attend internal / external Project reviews and other meetings, as necessary
Keep up to date with and adhere to Company and Project related procedures
When required assist Contractors in their interface management.
Attend internal progress and engineering meetings as required with the Contractors.
Participate in continuous risk analysis of the engineering works.
To manage and audit the work of Contractor and ensure that quality and standards are maintained, and costs effective solutions are adopted.
Provide support and network with Engineering Manager including the coordination between PMC disciplines
Review and provide responses to Technical Queries, Interface Queries and Concession Requests.
Identify and analyse negative trends in execution of engineering and initiate corrective actions.
To ensure that cost-effective solutions and application of value engineering are applied throughout the duration of Project.
To render professional assistance to Project Management, and Project Commercial Group.
Review and approve the development of the schedule established for process engineering and to control, monitor and report Engineering Contractors performance against the schedule.
Coordinate all communications and meetings with the Contractors regarding process engineering/design requirements as they may arise.
Review and approve process engineering activities planned by the Contractor to ensure compliance with the Scope of Work and quality objectives of the project.
Leading and coordinating all process reviews with stakeholders within the project.
Enforcing the management of project change process.
Ensure detail design documentation is developed, implemented and closed-out to the satisfaction of Company.
Ensure that the detail design activities are executed in accordance with Company procedures.
Ensure that detail designs are in accordance with Project HSE requirements.
Stimulate challenges and support the Contractor to strive for easy/simple solutions and to avoid unnecessary delays to the Project schedule(s).
To ensure the effective liaison and co-ordination by Contractor between all parties.
Ensure that all tasks assigned by the Project Manager are completed on time and within budget.
Attend internal / external Project reviews and other meetings, as necessary
Keep up to date with and adhere to Company and Project related procedures
When required assist Contractors in their interface management.
Ensure process engineering works are performed to meet project schedules and that completed works are delivered safely and in a timely manner
Support Procurements activities & relevant documents approvals, VENDOR documents approval, physical inspection as required.
Support Construction & commissioning activities by involvement in respective Discipline inspections & punch listing activities as applicable for release of respective certifications (DAC/MC,,etc.)
Verification of Final discipline specific Documentation & Database at handover & confirm completeness & correctness.
Supports Project Control within area with monthly reports, BPSC presentations etc.
Process/Engineering Change Management
Review of discipline specific Concession requests issued within the CONTRACT, validate the basis of the request & its impact on technical integrity & justification, prior to requesting endorsement from Technical authority.
Monitoring & ensuring that discipline specific design change management is being carried out for all respective engineering changes with proper multidiscipline impact assessment & the same is registered & controlled (as & when required).
Desired Candidate Profile
QUALIFICATIONS, EXPERIENCE, KNOWLEDGE & SKILLS
Minimum Qualification
4 year bachelor’s degree in engineering is must.
Must be fluent in English language (Written & Spoken).
Minimum Experience & Knowledge & Skills
Bachelor’s degree in relevant engineering discipline or equivalent, from an accredited university; or a minimum of fifteen (15) years of relevant experience in the Oil & Gas or Petrochemical industry.
Must have at least five (5) years of experience in a similar position on mega Oil & Gas or Petrochemical projects.
5+ years of GCC experience is preferred.
ADNOC Project experience is required.
Process management experience.
Through knowledge of industry governing codes & standards,
Excellent time management skills with a proven ability to meet deadlines.
Strong analytical and problem-solving skills.
Ability to prioritize tasks.
الغرض من الوظيفة
يتولى أخصائي هندسة العمليات مسؤولية ضمان الامتثال الفني من قِبل المقاول لنطاق التخصص المحدد للشركة، ومواصفات العمليات، والرموز والمعايير الحاكمة ذات الصلة، وأفضل الممارسات في هذا القطاع.
ضمان مستويات مرضية من أداء الصحة والسلامة والبيئة (HSE) من قِبل المقاول فيما يتعلق بجميع الأنشطة الهندسية.
مراقبة واعتماد إجراءات هندسة العمليات، والخطط، والجداول الزمنية لتنفيذ نطاق عمل هندسة العمليات المرتبط بالمشروع.
مراقبة، ومشاهدة، واعتماد (حسب الحاجة) أنشطة هندسة/تصميم العمليات الخاصة بالمقاول والجهة المرخصة للأعمال.
تنسيق وتتبع جميع عمليات تبادل وثائق العمليات بين فريق إدارة المشروع المتكامل (IPMT) والمقاولين.
نقطة الاتصال الوحيدة مع الجهة المرخصة والمقاول والشركة فيما يتعلق بتصميم عمليات الوحدات.
الإشراف على فريق هندسة العمليات التابع لفريق إدارة المشروع المتكامل (IPMT) ضمن النطاق المخصص.
توجيه العمل لفريق هندسة العمليات التابع لفريق إدارة المشروع المتكامل (IPMT) ضمن النطاق المخصص.
المسؤوليات الخاصة بالوظيفة
الضمان الفني
النزاهة الفنية: التحقق من النزاهة الفنية لمخرجات المشروع ذات الصلة وتحقيقها بما يتوافق مع:
التشريعات والالتزامات التنظيمية
الرموز والمعايير
الاعتماد
أساس التصميم
مراقبة وفحص المخرجات الفنية لمقاول الهندسة والمشتريات والإنشاءات (EPC) من أجل الحصول على الجودة المطلوبة، في الوقت المحدد وفي حدود الميزانية.
حضور اجتماعات التقدم الداخلي والاجتماعات الهندسية حسب الحاجة مع المقاولين والجهات المرخصة.
الإشراف على أعمال التصميم الخاصة بالمورد والمقاول وضمان توافقها مع نطاق العمل والمواصفات الفنية للمشروع.
ضمان توافق جداول هندسة العمليات مع متطلبات المشروع العامة للشركة.
دعم الشركة في تنفيذ الأعمال.
حضور مراجعات المشروع الداخلية/الخارجية وغيرها من الاجتماعات حسب الضرورة
البقاء على اطلاع دائم والالتزام بإجراءات الشركة والمشروع ذات الصلة
مساعدة المقاولين في إدارة الواجهات الخاصة بهم عند الحاجة.
حضور اجتماعات التقدم الداخلي والاجتماعات الهندسية حسب الحاجة مع المقاولين.
المشاركة في تحليل المخاطر المستمر للأعمال الهندسية.
إدارة وتدقيق عمل المقاول وضمان الحفاظ على الجودة والمعايير، واعتماد حلول فعالة من حيث التكلفة.
تقديم الدعم والعمل ضمن شبكة مع مدير الهندسة بما في ذلك التنسيق بين تخصصات إدارة مشاريع الإنشاءات (PMC)
مراجعة الردود على الاستفسارات الفنية، واستفسارات الواجهات، وطلبات الامتياز وتقديمها.
تحديد وتحليل الاتجاهات السلبية في تنفيذ الهندسة وبدء الإجراءات التصحيحية.
ضمان تطبيق حلول فعالة من حيث التكلفة وتطبيق هندسة القيمة طوال مدة المشروع.
تقديم المساعدة المهنية لإدارة المشروع ومجموعة الشؤون التجارية للمشروع.
مراجعة واعتماد تطوير الجدول الزمني المحدد لهندسة العمليات ومراقبة أداء مقاولي الهندسة مقابل الجدول الزمني والإبلاغ عنه.
تنسيق جميع الاتصالات والاجتماعات مع المقاولين فيما يتعلق بمتطلبات هندسة/تصميم العمليات التي قد تنشأ.
مراجعة واعتماد أنشطة هندسة العمليات التي يخطط لها المقاول لضمان الامتثال لنطاق العمل وأهداف الجودة للمشروع.
قيادة وتنسيق جميع مراجعات العمليات مع أصحاب المصلحة داخل المشروع.
فرض إدارة عملية تغيير المشروع.
ضمان تطوير وثائق التصميم التفصيلي، وتنفيذها، وإغلاقها بما يرضي الشركة.
ضمان تنفيذ أنشطة التصميم التفصيلي وفقاً لإجراءات الشركة.
ضمان توافق التصاميم التفصيلية مع متطلبات الصحة والسلامة والبيئة (HSE) للمشروع.
تحفيز التحديات ودعم المقاول للسعي نحو حلول سهلة/بسيطة وتجنب التأخير غير الضروري في جدول (جداول) المشروع.
ضمان التواصل والتنسيق الفعال من قِبل المقاول بين جميع الأطراف.
ضمان إنجاز جميع المهام الموكلة من قِبل مدير المشروع في الوقت المحدد وضمن الميزانية.
حضور مراجعات المشروع الداخلية/الخارجية وغيرها من الاجتماعات حسب الضرورة
البقاء على اطلاع دائم والالتزام بإجراءات الشركة والمشروع ذات الصلة
مساعدة المقاولين في إدارة الواجهات الخاصة بهم عند الحاجة.
ضمان تنفيذ أعمال هندسة العمليات لتلبية جداول المشروع وضمان تسليم الأعمال المنجزة بأمان وفي الوقت المناسب
دعم أنشطة المشتريات والموافقات على الوثائق ذات الصلة، والموافقة على وثائق المورد، والفحص المادي حسب الحاجة.
دعم أنشطة الإنشاء والتشغيل من خلال المشاركة في عمليات فحص التخصصات ذات الصلة وأنشطة قائمة الملاحظات (punch listing) حسب الاقتضاء لإصدار الشهادات ذات الصلة (شهادة إنجاز الأعمال/الاستكمال الميكانيكي، وما إلى ذلك)
التحقق من الوثائق وقاعدة البيانات النهائية الخاصة بالتخصص عند التسليم والتأكد من اكتمالها وصحتها.
دعم مراقبة المشروع ضمن النطاق من خلال التقارير الشهرية، وعروض BPSC التقديمية، وما إلى ذلك.
إدارة تغيير العمليات/الهندسة
مراجعة طلبات الامتياز الخاصة بالتخصص والصادرة ضمن العقد، والتحقق من أساس الطلب وتأثيره على النزاهة الفنية والتبرير، قبل طلب المصادقة من السلطة الفنية.
مراقبة وضمان تنفيذ إدارة تغيير التصميم الخاصة بالتخصص لجميع التغييرات الهندسية ذات الصلة مع إجراء تقييم مناسب للأثر متعدد التخصصات وتسجيلها والتحكم فيها (حسب الحاجة).
ملف المرشح المطلوب
المؤهلات والخبرة والمعرفة والمهارات
الحد الأدنى للمؤهلات
درجة البكالوريوس لمدة 4 سنوات في الهندسة إلزامية.
يجب أن يكون طليقاً في اللغة الإنجليزية (كتابةً وتحدثاً).
الحد الأدنى للخبرة والمعرفة والمهارات
درجة البكالوريوس في تخصص هندسي ذي صلة أو ما يعادلها، من جامعة معتمدة؛ أو خبرة ذات صلة لا تقل عن خمسة عشر (15) عاماً في قطاع النفط والغاز أو البتروكيماويات.
يجب أن يتمتع بخبرة لا تقل عن خمس (5) سنوات في منصب مماثل في مشاريع النفط والغاز أو البتروكيماويات الكبرى.
يفضل الحصول على خبرة 5+ سنوات في دول مجلس التعاون الخليجي.
خبرة في مشاريع أدنوك (ADNOC) مطلوبة.
خبرة في إدارة العمليات.
معرفة شاملة بالرموز والمعايير الحاكمة في القطاع،
مهارات ممتازة في إدارة الوقت مع قدرة مثبتة على الالتزام بالمواعيد النهائية.
مهارات تحليلية قوية ومهارات حل المشكلات.
القدرة على ترتيب المهام حسب الأولوية.