Jobs For Faculty Of Engineering Graduates in UAE
18314 Jobs Found
Save and set alert for similar positionsManage alerts
Job Title: Senior Structural Health Monitoring Specialist<p><strong>Location:</strong> United Arab Emirates (Remote)</p><p><strong>Employment Type:</strong> Full-Time</p><p><strong>Work Arrangement:</strong> 100% Remote — Work From Home</p><p><strong>Level:</strong> Senior</p>About the Role<p>We are seeking an experienced Senior Structural Health Monitoring Specialist to support the assessment, monitoring, and performance evaluation of infrastructure assets, including bridges, buildings, tunnels, industrial structures, and other critical facilities. The successful candidate will analyze structural monitoring data, evaluate asset condition, identify potential deterioration or abnormal behavior, and provide technical recommendations to improve structural safety, reliability, and service life.</p><p>This fully remote role focuses on structural data analysis, monitoring system design reviews, vibration assessment, anomaly detection, technical reporting, and predictive maintenance support. The ideal candidate will have strong expertise in structural engineering, sensor technologies, structural dynamics, and data interpretation, with the ability to collaborate remotely with engineering teams, infrastructure operators, asset managers, and field technicians.</p>Key Responsibilities<ul><li>Develop and review structural health monitoring (SHM) strategies for bridges, buildings, tunnels, industrial facilities, and other infrastructure assets.</li><li>Analyze data collected from structural sensors, including strain gauges, accelerometers, displacement transducers, inclinometers, tiltmeters, and temperature sensors.</li><li>Evaluate structural behavior under static and dynamic loading conditions using monitoring data and engineering assessment methods.</li><li>Interpret vibration measurements, modal frequencies, mode shapes, damping characteristics, and other structural dynamic parameters.</li><li>Identify abnormal structural responses, unusual movement patterns, potential deterioration indicators, and changes in asset performance.</li><li>Support the development of monitoring plans, sensor layouts, data acquisition requirements, and measurement specifications.</li><li>Review monitoring system architectures, instrumentation documentation, sensor calibration records, and data collection procedures.</li><li>Establish baseline structural performance indicators and evaluate changes over time using historical and real-time monitoring datasets.</li><li>Apply statistical analysis, signal processing, trend analysis, and anomaly detection techniques to identify potential structural risks.</li><li>Support the integration of monitoring data with structural analysis models, digital twins, and asset management platforms.</li><li>Conduct remote technical assessments of structural performance and recommend further investigation when monitoring results indicate potential concerns.</li><li>Collaborate with structural engineers to compare observed behavior with design assumptions, analytical predictions, and applicable acceptance criteria.</li><li>Assist with fatigue assessment, serviceability evaluation, vibration performance reviews, and long-term structural condition monitoring.</li><li>Develop dashboards, performance indicators, and automated reporting workflows to improve monitoring efficiency and data visibility.</li><li>Review monitoring data quality, sensor reliability, missing measurements, calibration information, and potential sources of measurement error.</li><li>Support the development of condition-based maintenance strategies and predictive maintenance recommendations.</li><li>Prepare technical reports, monitoring summaries, risk assessments, and recommendations for infrastructure owners and project stakeholders.</li><li>Maintain traceable records of monitoring data, analytical methods, assumptions, findings, and engineering recommendations.</li><li>Coordinate remotely with field teams responsible for sensor installation, inspections, equipment maintenance, and physical verification activities.</li><li>Provide technical guidance to junior engineers and data analysts on structural monitoring methods, data interpretation, and reporting standards.</li></ul>Qualifications and Experience<ul><li>Bachelor's degree in Structural Engineering, Civil Engineering, Mechanical Engineering, or a related engineering discipline.</li><li>Significant professional experience in structural health monitoring, structural assessment, infrastructure engineering, or structural condition evaluation.</li><li>Strong understanding of structural mechanics, structural dynamics, material behavior, and the performance of civil infrastructure under operational loading.</li><li>Experience analyzing data from structural monitoring systems and interpreting sensor measurements.</li><li>Knowledge of vibration analysis, modal identification, signal processing, statistical evaluation, and trend analysis.</li><li>Familiarity with structural instrumentation, including strain gauges, accelerometers, displacement sensors, inclinometers, and related data acquisition technologies.</li><li>Experience with structural analysis software such as SAP2000, ETABS, ANSYS, MIDAS Civil, or equivalent engineering platforms.</li><li>Proficiency in data analysis tools such as MATLAB, Python, R, or comparable scientific computing environments.</li><li>Understanding of relevant structural design, assessment, and monitoring standards, including applicable Eurocodes, ISO standards, or recognized industry guidelines.</li><li>Familiarity with sensor calibration, data validation, measurement uncertainty, and monitoring system performance evaluation.</li><li>Experience supporting condition assessment, fatigue evaluation, predictive maintenance, or infrastructure asset management is advantageous.</li><li>Ability to distinguish between genuine structural anomalies, environmental effects, operational variations, and sensor-related errors.</li><li>Strong analytical, problem-solving, technical writing, and engineering judgment skills.</li><li>Excellent communication skills and the ability to coordinate effectively with multidisciplinary teams in a remote working environment.</li><li>Relevant professional engineering registration, structural monitoring certifications, or specialist training in structural dynamics are advantageous.</li><li>Ability to manage multiple technical assignments independently and produce accurate, well-documented engineering assessments.</li></ul>What We Offer<ul><li>A 100% remote, work-from-home arrangement.</li><li>A full-time senior-level opportunity in structural engineering and infrastructure monitoring.</li><li>Opportunities to contribute to infrastructure safety, asset performance optimization, and predictive maintenance initiatives.</li><li>Professional development in structural dynamics, sensor technologies, engineering analytics, and digital infrastructure monitoring.</li><li>A collaborative remote working environment focused on engineering quality, data-driven decisions, and continuous improvement.</li></ul>How to Apply<p>Interested candidates should submit an updated CV highlighting their structural health monitoring experience, structural analysis expertise, sensor data interpretation skills, and relevant engineering qualifications.</p><p><strong>Application Subject:</strong> Application – Senior Structural Health Monitoring Specialist (UAE Remote)</p><ul><li>Candidates should confirm applicable employment arrangements, residency requirements, and work authorization before accepting an offer. This position is structured for remote monitoring data analysis, engineering assessments, system design reviews, and technical reporting. Physical inspections, sensor installation, field measurements, and on-site structural testing must be performed by qualified local personnel where required. Any structural safety concerns identified through remote analysis must be escalated promptly to the responsible engineering authority for appropriate verification and action.</li></ul>
<p>A reputable company is hiring a Site Engineer to oversee daily site activities, coordinate with workers and contractors, monitor work progress, and ensure projects are completed according to approved drawings, specifications, quality standards, and safety requirements.</p>
<p>Responsibilities:</p>
<p>Supervise and coordinate daily construction/site activities.<br />
Monitor work progress and ensure activities follow project schedules.<br />
Review drawings, plans, specifications, and work requirements.<br />
Coordinate with contractors, subcontractors, technicians, and site workers.<br />
Inspect completed and ongoing work to ensure quality standards are maintained.<br />
Identify site issues and coordinate appropriate solutions.<br />
Monitor the use of materials, tools, and equipment.<br />
Prepare daily progress reports and maintain site documentation.<br />
Ensure proper implementation of health and safety procedures.<br />
Coordinate inspections and support project handover activities.<br />
Report delays, technical issues, and site requirements to management.<br />
Perform other site-related duties as assigned.</p>
<p>Requirements:</p>
<p>Bachelor’s degree or diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or a related field.<br />
Previous site or construction experience is preferred.<br />
Good understanding of engineering drawings and site procedures.<br />
Strong communication and coordination skills.<br />
Good problem-solving and organizational abilities.<br />
Basic computer skills and knowledge of MS Office.<br />
Ability to work under pressure and meet project deadlines.<br />
Ability to work effectively with different teams on site.<br />
Freshers with relevant engineering qualifications may be considered.</p>
<p>Interested candidates are encouraged to send their updated CV hrmira.mehra@gmail.com</p>
<ul><li><p>Manage and coordinate NOC applications and approvals for engineering, infrastructure, building, and development projects.</p></li><li><p>Prepare, review, and coordinate NOC submissions, drawings, technical documents, method statements, and supporting documentation.</p></li><li><p>Coordinate with relevant government authorities, utility providers, and service departments to obtain required NOCs and approvals.</p></li><li><p>Ensure submissions comply with applicable authority requirements, project specifications, and UAE regulations.</p></li><li><p>Follow up on NOC applications and approvals and maintain accurate records of submission status, comments, revisions, and approvals.</p></li><li><p>Review authority comments and coordinate with internal engineering teams to address and close comments within required timelines.</p></li><li><p>Liaise with project managers, design engineers, site teams, contractors, and clients regarding NOC requirements and approval status.</p></li><li><p>Identify potential NOC and authority-related issues at an early stage and coordinate appropriate solutions.</p></li><li><p>Attend coordination meetings with clients, contractors, consultants, and authorities when required.</p></li><li><p>Maintain NOC trackers, approval registers, correspondence logs, and project documentation.</p></li><li><p>Monitor submission and approval schedules to ensure NOCs are obtained in line with project requirements and construction timelines.</p></li><li><p>Support the project team in understanding authority requirements and incorporating them into design and construction activities.</p></li><li><p>Coordinate multiple NOC applications simultaneously across different projects.</p></li><li><p>Ensure all approved drawings, permits, NOCs, and authority correspondence are properly documented and readily accessible.</p></li><li><p>Provide regular updates to project management on outstanding NOCs, approvals, risks, and required actions.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in <strong>Civil Engineering, Electrical Engineering, Mechanical Engineering, or a related engineering discipline</strong>.</p></li><li><p>Minimum <strong>7 years of relevant experience</strong> in NOC coordination, authority approvals, infrastructure, construction, or engineering consultancy.</p></li><li><p><strong>Mandatory: Previous experience working on projects in Abu Dhabi, UAE.</strong></p></li><li><p>Strong understanding of UAE authority approval and NOC processes.</p></li><li><p>Experience working within an engineering consultancy, contractor, infrastructure company, or project management environment.</p></li><li><p>Ability to read and understand engineering drawings and technical documentation.</p></li><li><p>Strong coordination and follow-up skills.</p></li><li><p>Excellent written and verbal communication skills.</p></li><li><p>Strong organizational skills with the ability to manage multiple submissions and deadlines.</p></li><li><p>Proficiency in Microsoft Office, particularly Excel and Word.</p></li><li><p>Familiarity with AutoCAD and document management systems is an advantage.</p></li><li><p>UAE driving licence is an advantage.</p></li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job Code:</strong> 221/001/546<br><strong>Industry:</strong> Water Treatment / Electrical, Instrumentation & Automation<br><br>Our client is seeking a <strong>Technical Secretary – Electrical</strong> to provide administrative and technical support to the Head of the Electrical Department. The role requires an Electrical Engineering background with the ability to support technical documentation, project coordination, departmental follow-ups, and day-to-day administrative activities.<br>The Technical Secretary – Electrical will assist with <strong>electrical technical documents, drawings, specifications, reports, material submittals, technical submissions, approvals, and other project documentation</strong>, while coordinating with engineering, project, procurement, and site teams.<br>The ideal candidate should have a <strong>Bachelor’s Degree in Electrical Engineering</strong> and <strong>3+ years of experience as an Electrical Engineer, Project Engineer, Technical Coordinator, or in a similar role</strong>, preferably within the water treatment, industrial, MEP, or electrical engineering sector.<br><br><ul><li>Provide administrative and technical support to the <strong>Head of the Electrical Department</strong>.</li><li>Assist with <strong>electrical technical documents, drawings, specifications, reports, and project documentation</strong>.</li><li>Coordinate with <strong>engineering, project, procurement, and site teams</strong> for departmental requirements and follow-ups.</li><li>Maintain and track <strong>electrical drawings, material submittals, technical submissions, approvals, and other project documents</strong>.</li><li>Prepare correspondence, reports, meeting minutes, and departmental records.</li><li>Follow up on pending <strong>technical and project-related actions</strong> to ensure timely completion.</li></ul><br><br><ul><li>Bachelor’s Degree in <strong>Electrical Engineering</strong>.</li><li><strong>3+ years of experience as an Electrical Engineer, Project Engineer, Technical Coordinator, or in a similar role</strong>, preferably within the water treatment, industrial, MEP, or electrical engineering sector.</li><li>Good understanding of <strong>electrical systems, equipment, drawings, and engineering terminology</strong>.</li><li>Experience within <strong>water treatment, industrial, MEP, or electrical engineering environments</strong> is preferred.</li><li>Good knowledge of <strong>MS Office</strong>.</li><li>Ability to understand <strong>AutoCAD drawings</strong> would be an advantage.</li><li>Strong coordination, documentation, and communication skills.</li><li>Comfortable handling both <strong>technical coordination and administrative responsibilities</strong>.</li></ul><br><br><em>Please visit our </em><strong><em>jobs</em></strong><em> page to check out our current list of jobs in UAE and across the world.</em><br><em>Follow us on </em><strong><em>LinkedIn</em></strong><em> and </em><strong><em>Facebook</em></strong><em> to stay updated regarding our upcoming opportunities.</em><br><em>Subscribe to our </em><strong><em>LinkedIn newsletter</em></strong><em> for weekly job updates.</em><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Job Overview<p>We are seeking an experienced Ambulance Estimation Engineer to prepare accurate and commercially competitive estimates for ambulance vehicles, specialist medical interiors, emergency equipment, and associated conversion works. The role requires strong technical understanding, attention to detail, supplier coordination, and the ability to interpret customer requirements, drawings, specifications, and tender documents. The successful candidate will work closely with design, procurement, production, sales, and project teams to ensure estimates are complete, compliant, and delivered within required deadlines.</p><br><br>Key Responsibilities<ul><li><p>Prepare detailed cost estimates, quotations, bills of materials, and tender submissions for ambulance conversions and specialist emergency vehicles.</p><br><br></li><li><p>Review customer briefs, technical specifications, drawings, schedules, and scope-of-work documents to identify project requirements.</p><br><br></li><li><p>Estimate vehicle conversion works, medical interiors, electrical systems, lighting, oxygen systems, HVAC, stretchers, patient handling equipment, storage units, communications equipment, and associated accessories.</p><br><br></li><li><p>Develop accurate material, labour, subcontractor, tooling, logistics, and installation cost calculations.</p><br><br></li><li><p><span>Analyse client specifications and engineering requirements across vehicle body modifications, mechanical and electrical systems, and medical equipment integration to prepare precise material, labour, and equipment estimates</span></p><br><br></li><li><p>Obtain and evaluate supplier and subcontractor quotations, ensuring technical compliance, lead times, and commercial terms are clearly understood.</p><br><br></li><li><p>Maintain estimating databases, pricing records, bills of materials, labour rates, supplier information, and historical cost data.</p><br><br></li><li><p>Support the sales and business development teams with technical clarification, value engineering, pricing reviews, and customer presentations.</p><br><br></li><li><p>Review changes to scope and prepare revised estimates, variation quotations, and commercial impact assessments.</p><br><br></li></ul>Qualifications and Experience<ul><li><p>Bachelor’s degree in Mechanical Engineering, Automotive Engineering, Electrical Engineering, Manufacturing Engineering, or a related technical discipline.</p><br><br></li><li><p>Experience in estimating, cost engineering, project engineering, vehicle conversion, specialist vehicles, automotive manufacturing, medical equipment, or a related industry.</p><br><br></li><li><p>Practical knowledge of ambulance design, emergency vehicles, vehicle body conversions, medical interiors, or specialist equipment would be advantageous.</p><br><br></li><li><p>Strong ability to interpret engineering drawings, technical specifications, bills of materials, wiring diagrams, and customer requirements.</p><br><br></li></ul>
<br><br> </div>
<strong>Job Description<br><br></strong>Wood is currently recruiting for an experienced PMC Senior Civil Engineer for ADNOC Onshore in Abu Dhabi. Due to the nature of the projects and client expectation, the position will be based full time at ASAB site.<br><br><strong>Our Clients and Projects <br><br></strong><strong>Designing the future. Transforming the world. <br><br></strong>Across EMEA, our teams are providing solutions and expertise to support our growing client base, focused on combining maintenance and operations with asset management, modifications and engineering services across the energy and materials markets. <br><br>We are focused on growth and our strategy is centered around building partnerships with our clients across the three regions: UK, Norway and the Middle East and Africa. <br><br><strong>What We Can Offer<br><br></strong><ul><li>Meaningful and interesting projects: Delivered to high profile clients across the Energy Sector Commitment to Diversity and Inclusion: We are an organisation actively committed to diversity and inclusion across our business </li><li>Competitive remuneration package: With regular reviews to ensure we are rewarding at the right level in line with the market </li><li>Medical Insurance: Ensures inpatient, and outpatient medical care is available should you require treatment </li><li>Group Life and Personal Accident Insurance: The company provides Life Assurance cover </li><li>End of Service Gratuity: In line with UAE Labor Law, all employees are eligible for an End of Service benefit </li><li>The Employee Share Plan: Gives you the opportunity to purchase Wood shares and receive a match from the company </li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones </li><li>Commmitment to continued professional development: Development plans that are tailored to your individual needs and interests </li><li>Global connections: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li><li>Energy Transition Academy: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field <br><br></li></ul><strong>Job Objective<br><br></strong><ul><li>Provide technical expertise in all Civil and Structural design</li><li>Ensure design and engineering compliance with relevant codes and ADNOC standards</li><li>Coordinate, Monitor and handle Civil and Structural Engineering design and engineering with EPC Contractor as per project expectation and complete the same within the time frame</li><li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc. </li><li>Perform regular and timely technical reviews of Civil and Structural Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.<br><br></li></ul><strong>Responsibilities<br><br></strong><ul><li>Ensure integration of overall Civil and Structural Engineering. Overall coordination within IPMT Mechanical Civil and Structural Engineering Team</li><li>Ensure quality and accuracy of Engineering Consultant’s & EPC Contractor’s Civil and Structural Engineering design activities</li><li>Review and approval of Engineering Consultant's and EPC Contractor’s work and ensure compliance with ADNOC project specifications, relevant codes and standards, and best industry practices</li><li>Coordinate the required engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation.</li><li>Participate in teams for equipment sizing / equipment selection considering optimization and standardization.</li><li>Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects.</li><li>Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects.</li><li>Participate in layout reviews, Model review, design reviews, and technical workshops.</li><li>Provide technical assistance and coordination with other discipline engineers.</li><li>Coordinate technical reviews and bid evaluation, and performance evaluation.</li><li>Provide technical assistance during installation, pre-commissioning & commissioning</li><li>Report to ADNOC Discipline Team Leader, Engineering Manager, and provide support to Project Managers and Engineers within the Project Management Team organization</li><li>Interface with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department</li><li>Interface regularly with Contractor’s Engineering and Project Management team and discipline engineers as and when required<br><br></li></ul><strong>Qualifications<br><br></strong><strong>Skills And Qualifications <br><br></strong><strong>What makes you remarkable? <br><br></strong>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br><strong>Expected<br><br></strong><ul><li>Bachelor of Science degree in Civil Engineering</li><li>Minimum of 15 years of relevant experience in oil and gas industry </li><li>Excellent written and verbal communication skills</li><li>Excellent technical team and interpersonal skills</li><li>Experience and detailed knowledge of relevant international codes and standards</li><li>Knowledge of engineering computer programs and general business software</li><li>Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems<br><br></li></ul><strong>About Us<br><br></strong>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br><strong>Diversity Statement <br><br></strong>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is currently recruiting for an experienced PMC Senior Civil Engineer for ADNOC Onshore in Abu Dhabi. Due to the nature of the projects and client expectation, the position will be based full time at ASAB site.</p><br> <p><strong>Our Clients and Projects </strong></p><br><br> <p><strong>Designing the future. Transforming the world. </strong></p><br><br> <p>Across EMEA, our teams are providing solutions and expertise to support our growing client base, focused on combining maintenance and operations with asset management, modifications and engineering services across the energy and materials markets. </p><br><br> <p>We are focused on growth and our strategy is centered around building partnerships with our clients across the three regions: UK, Norway and the Middle East and Africa. </p><br> <p><strong>What we can offer </strong></p><br> <br> <ul> <li><strong>Meaningful and interesting projects: </strong>Delivered to high profile clients across the Energy Sector Commitment to Diversity and Inclusion: We are an organisation actively committed to diversity and inclusion across our business </li> <li><strong>Competitive remuneration package:</strong> With regular reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance</strong>: Ensures inpatient, and outpatient medical care is available should you require treatment </li> <li><strong>Group Life and Personal Accident Insurance</strong>: The company provides Life Assurance cover </li> <li><strong>End of Service Gratuity</strong>: In line with UAE Labor Law, all employees are eligible for an End of Service benefit </li> <li><strong>The Employee Share Plan</strong>: Gives you the opportunity to purchase Wood shares and receive a match from the company </li> <li><strong>Long Service Award</strong>: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones </li> <li><strong>Commmitment to continued professional development</strong>: Development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Energy Transition Academy</strong>: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field </li> </ul> <p><strong>Job Objective</strong></p><br> <br> <ul> <li>Provide technical expertise in all Civil and Structural design</li> </ul> <br> <ul> <li>Ensure design and engineering compliance with relevant codes and ADNOC standards</li> </ul> <br> <ul> <li>Coordinate, Monitor and handle Civil and Structural Engineering design and engineering with EPC Contractor as per project expectation and complete the same within the time frame</li> </ul> <br> <ul> <li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc. </li> </ul> <br> <ul> <li>Perform regular and timely technical reviews of Civil and Structural Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.</li> </ul> <br> <br> <br><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <ul> <li>Ensure integration of overall Civil and Structural Engineering. Overall coordination within IPMT Mechanical Civil and Structural Engineering Team</li> </ul> <br> <ul> <li>Ensure quality and accuracy of Engineering Consultant’s & EPC Contractor’s Civil and Structural Engineering design activities</li> </ul> <br> <ul> <li>Review and approval of Engineering Consultant's and EPC Contractor’s work and ensure compliance with ADNOC project specifications, relevant codes and standards, and best industry practices</li> </ul> <br> <ul> <li>Coordinate the required engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation.</li> </ul> <br> <ul> <li>Participate in teams for equipment sizing / equipment selection considering optimization and standardization.</li> </ul> <br> <ul> <li>Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects.</li> </ul> <br> <ul> <li>Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects.</li> </ul> <br> <ul> <li>Participate in layout reviews, Model review, design reviews, and technical workshops.</li> </ul> <br> <ul> <li>Provide technical assistance and coordination with other discipline engineers.</li> </ul> <br> <ul> <li>Coordinate technical reviews and bid evaluation, and performance evaluation.</li> </ul> <br> <ul> <li>Provide technical assistance during installation, pre-commissioning & commissioning</li> </ul> <br> <ul> <li>Report to ADNOC Discipline Team Leader, Engineering Manager, and provide support to Project Managers and Engineers within the Project Management Team organization</li> </ul> <br><br> <ul> <li>Interface with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department</li> </ul> <br> <ul> <li>Interface regularly with Contractor’s Engineering and Project Management team and discipline engineers as and when required</li> </ul> <br><br><br>Qualifications:<br> <p><strong>Skills And Qualifications </strong></p><br><br> <p><strong>What makes you remarkable? </strong></p><br><br> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><br> <p><strong>Expected:</strong></p><br> <ul> <li>Bachelor of Science degree in Civil Engineering</li> </ul> <br> <ul> <li>Minimum of 15 years of relevant experience in oil and gas industry </li> </ul> <br> <ul> <li>Excellent written and verbal communication skills</li> </ul> <br> <ul> <li>Excellent technical team and interpersonal skills</li> </ul> <br> <ul> <li>Experience and detailed knowledge of relevant international codes and standards</li> </ul> <br> <ul> <li>Knowledge of engineering computer programs and general business software</li> </ul> <br> <ul> <li>Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems</li> </ul> <br><br> </div>
<p>Deputy Chief Technology Officer - Trading Firm </p><p><br></p><p>Funding: Series C</p><p><br></p><p>About The Company</p><p>Since 2017, The Company has grown into a leading digital asset market maker and infrastructure provider. Today, our team of 200+ professionals across 42 nationalities powers trading on 80+ exchanges. Operating across Capital Markets and Asset & Wealth Management divisions, we combine algorithmic trading innovation (pioneering Rust in Web3) with institutional-grade financial services. Backed by our recent Series C, we are actively building the future of digital assets through organic innovation and strategic M&A.</p><p><br></p><p>Role Overview</p><p>The Deputy CTO partners with the CTO to lead the day-to-day operations of The Company’s global engineering organization. You will hold near-executive authority over engineering delivery, operational resilience, organizational health, and budget across all divisions. By connecting business strategy to world-class technical execution, you will ensure our high-frequency trading and asset management platforms scale reliably,<em> freeing the CTO to focus on long-range AI transformation and external representation.</em></p><p><br></p><p>What Success Looks Like (12–18 Months)</p><ul><li>Operational Excellence: A unified engineering cadence (OKRs, KPIs, delivery flow) is consistently adopted across divisions, enabling VPs to operate with high autonomy.</li><li>Platform Modernization: The multi-year trading platform consolidation transitions successfully from design to MVP with clear improvements in latency and deployment velocity.</li><li>Data Governance: A centralized, group-level data capability is live with a published catalog and cross-divisional SLAs.</li><li>Regulatory & Cost Control: Engineering consistently hits all MiCA, DORA, and SOC 2 milestones while managing cloud and vendor spend against clear business-unit baselines.</li></ul><p><br></p><p>Key Responsibilities</p><ul><li>Engineering Delivery & Cadence: Run day-to-day global engineering operations. Own OKRs, monthly business reviews, and delivery pipelines. Deputize for the CTO with the Board, ExCo, and external partners.</li><li>Platform Consolidation & Data Strategy: Lead the multi-year unification of The Company's trading infrastructure across 80+ venues and 1,400+ markets. Oversee the creation of shared group data pipelines and governance.</li><li>Cybersecurity Execution & Compliance: Own the on-the-ground execution of The Company’s security and regulatory commitments (MiCA, DORA, SOC 2). Foster a "controls-by-design" engineering culture while respecting regulated divisional information walls.</li><li>Talent, Budget & Scale: Manage the global engineering budget, vendor relationships, and M&A engineering integrations. Mentor divisional VPs, refine career frameworks, and scale the team across Europe and the US.</li></ul><p><br></p><p>Core Competencies</p><ul><li>Scale Operational Leadership: Proven ability to design and run engineering operating models (metrics, governance, delivery) for global teams.</li><li>Technical Depth & Decision-Making: Comfortable challenging senior architects on system design and making decisive, firm-wide trade-offs under constraints.</li><li>Executive Communication: Exceptional ability to translate complex technical risks, budgets, and timelines into crisp, actionable insights for ExCo and the Board.</li><li>Regulatory Execution Fluency: Expert at translating high-level security strategies into practical, everyday engineering workflows and compliance outcomes.</li></ul><p><br></p><p>Key Experiences & Target Background</p><ul><li>Trading & Crypto Infrastructure: Substantial experience with low-latency distributed systems, algorithmic trading infrastructure, and digital assets (CEX/DEX market structure, custody, on-chain settlement). Familiarity with Rust is a strong plus.</li><li>Multi-Division Scale & Consolidation: Proven track record running global engineering across multiple business lines, including executing large-scale platform consolidations and managing shared data/infra functions.</li><li>Regulated Environments: Experience operating within strict regulatory frameworks (MiCA, DORA, SOC 2) and managing engineering across compliance-driven information walls.</li><li>Operational #2 Profile: Prior experience as a trusted senior deputy or operational partner to a technical founder or CTO, taking true ownership of execution while strategy is held by the principal.</li><li>Growth & M&A Integration: Experience scaling engineering organizations through rapid maturity phases and integrating acquired technical teams.</li></ul><p><br></p><p><strong>What We Offer</strong></p><p>We recognize that elite engineering leadership requires a world-class environment. As a key executive, this is a highly influential role where you will drive our overarching technology strategy, shape the engineering culture, and have the direct ability to make major company decisions.</p><p>To support your success, we offer a top-percentile compensation and benefits package designed for global leaders:</p><p><strong>Financial & Equity</strong></p><ul><li><strong>Competitive Base Salary:</strong> A highly attractive, top-market base salary reflective of elite engineering leadership in the proprietary trading and HFT space.</li><li><strong>Stock Option Plan:</strong> Significant equity participation, giving you a vested stake in the long-term success and growth of the firm.</li><li><strong>Performance Bonus:</strong> A highly lucrative, discretionary annual bonus structure tied directly to firm and individual impact.</li></ul><p><strong>Workplace Flexibility & Tech</strong></p><ul><li><strong>Ultimate Working Flexibility:</strong> Choose the environment where you perform best, with fully remote, hybrid, or premium office-based options.</li><li><strong>Global Mobility:</strong> The seamless ability to travel to, work from, and collaborate across our international office hubs.</li><li><strong>Executive Tech Budget:</strong> A generous workplace and technology allowance to build a bespoke, ultra-high-end remote engineering and trading workstation.</li></ul><p><strong>Health, Culture & Lifestyle</strong></p><ul><li><strong>Localized Statutory Care:</strong> Full statutory benefits, pension contributions, and leave entitlements tailored to maximize the standards of your country of residence.</li><li><strong>Global Offsites:</strong> Fully funded company offsites and leadership retreats to foster strategic alignment and innovation.</li><li><strong>Company Socials:</strong> Regular regional team events and socials to build deep relationships across our engineering and trading desks.</li></ul><p><strong>Our Interview Process</strong></p><p>We respect your time and run a streamlined, transparent, and highly communicative hiring process. For this executive position, our process consists of:</p><ol><li><strong>Initial Discovery:</strong> An introductory call with our Senior Talent Partner to discuss your background, the role's scope, and mutual alignment.</li><li><strong>Strategic & Technical Deep-Dive:</strong> A call with our CTO to discuss architectural philosophy, high-frequency infrastructure, and engineering leadership.</li><li><strong>Executive Alignment:</strong> A comprehensive meeting with our Chief Executive team to focus on business strategy, firm vision, and cultural fit.</li><li><strong>Presentation & Debrief:</strong> A final stage involving a presentation on a relevant technical or strategic topic, followed by an interactive debrief with our leadership.</li><li><strong>Offer:</strong> Extension of a highly competitive offer to join the executive team.</li></ol><p><br></p>
<strong>Description Du Poste</strong><p>Joining SOCOTEC means joining an active and ambitious community of 14,000 experts (turnover of €1,8b in 2025 compared to €510M in 2016), players in the city of tomorrow, ready to take up new challenges in the field of Testing, Inspection and Certification in Construction, Infrastructure and Industry.<br><br></p><p>We provide risk management and technical consulting services and support our clients throughout the asset cycle.<br><br></p><p>Our objectives are to ensure their compliance, extend their lifespan, improve their environmental performance and guarantee the safety of people.<br><br><br><br></p><strong>Job Description<br><br></strong><p>MAIN ASSIGNMENTS<br><br></p><p>1. Job Role<br><br></p><ol><li><ol><li>The Senior Electrical & ELV Engineer is responsible for managing, reviewing, and delivering electrical and extra-low-voltage (ELV) engineering design, technical consultancy, inspections, and supervision services for building and infrastructure projects. </li><li>The role involves ensuring that all electrical and ELV engineering works comply with applicable UAE regulations, international standards, project specifications, and client requirements while maintaining SOCOTEC's quality, health, safety, and technical standards and including support to the FLS department as a<strong> House of Expertise (HoE).</strong></li></ol></li></ol><p>2. Key Roles and Responsibilities<br><br></p><p><strong>A. Electrical Engineering<br><br></strong></p><ol><li><ol><li>Review and assess electrical engineering designs, drawings, specifications, calculations, and technical submissions. </li><li>Review electrical load calculations, power distribution systems, single-line diagrams (SLDs), and electrical layouts. </li><li>Review LV distribution panels, transformers, generators, UPS systems, and emergency power systems. </li><li>Review lighting design, emergency lighting, small power, and lighting control systems. </li><li>Review earthing, grounding, and lightning protection systems. </li><li>Review material submittals, method statements, risk assessments, and shop drawings. </li><li>Assess electrical installations for compliance with applicable codes, standards, and project requirements. </li><li>Conduct technical inspections and condition assessments of existing electrical installations. </li><li>Identify technical deficiencies and recommend appropriate corrective and preventive actions. </li><li>Participate in technical meetings, site inspections, witness testing, and commissioning activities. </li><li>Assess electrical system functionality, compliance, and operational performance. </li></ol></li></ol><p><strong>B. ELV Engineering<br><br></strong></p><ol><li><ol><li>Review and assess ELV systems design, drawings, specifications, and technical submissions. </li><li>Review and coordinate the following ELV systems:</li></ol></li></ol><p> <br><br></p><ul><li><ul><li>CCTV and Video Surveillance Systems. </li><li>Access Control Systems. </li><li>Structured Cabling and Data Networks. </li><li>Building Management Systems (BMS). </li><li>Intercom and Video Door Entry Systems. </li><li>Master Clock and IPTV Systems. </li><li>Audio-Visual Systems. </li><li>Disabled Refuge and Emergency Communication Systems. </li></ul></li></ul><p> <br><br></p><ol><li><ol><li>Review system integration, interfaces, and coordination with MEP and other engineering disciplines. </li><li>Review material submittals, method statements, risk assessments, and shop drawings. </li><li>Assess ELV system functionality, compliance, and operational performance. </li><li>Participate in technical meetings, site inspections, witness testing, and commissioning activities. <br><br></li></ol></li></ol><strong>Qualifications<br><br></strong><ol><li><u>Education and Professional Qualifications </u></li></ol><ol><li><ol><li>A Bachelor of Engineering (B.E.) in Electrical and Electronics Engineering is preferred. </li><li>The candidate must hold a recognised bachelor’s degree in electrical engineering or electrical and Electronics Engineering. </li><li><strong>UAE Ministry of Education (MOE) Certificate of Recognition / Degree Equivalency is mandatory.</strong></li><li>Candidates must provide attested educational certificates and supporting documents as required by UAE regulations. </li></ol></li></ol><p> <br><br></p><ol><li><u>Required Experience</u></li><li><ol><li><strong>Minimum 10 years of relevant professional experience in electrical and ELV engineering is mandatory.</strong></li><li>Experience in engineering consultancy, design review, technical supervision, inspection, and project delivery. </li><li>Strong knowledge of UAE electrical regulations, authority requirements, and international engineering standards. </li><li>Experience in witness testing, commissioning, troubleshooting, and assessment of electrical and ELV systems is preferred. </li><li>Fire & Life Safety related experience is advantageous. <br><br></li></ol></li></ol><strong>Additional Information<br><br></strong><ul><li><p>This position offers a unique opportunity to contribute to the growth of our company while developing your commercial skills in a dynamic international environment. You will play a central role in developing our client portfolio and expanding our market presence.<br><br></p><p>If you are passionate about commercial challenges and wish to join a leading company in its field, join SOCOTEC Certification Singapore and participate in our mission to create a safer and more sustainable world.<br><br></p></li></ul>
<strong>Job Title<br><br></strong>Electrical Design Verification Engineer<br><br><strong>Job Overview<br><br></strong>We are seeking an Electrical Engineer or Senior Electrical Engineer with strong engineering, design, and EPC experience to support the design review, verification, and technical assurance of electrical systems for oil and gas projects.<br><br><strong>Key Responsibilities<br><br></strong>Electrical Design and Engineering<br><br><ul><li>Independently perform design reviews and technical verification of electrical systems for oil and gas facilities.</li><li>Perform electrical engineering studies, design calculations, and technical assessments.</li><li>Prepare electrical design deliverables in accordance with project requirements, applicable standards, and engineering practices.</li><li>Review electrical design deliverables, including design bases, philosophies, single-line diagrams, load schedules, and power generation and distribution systems covering HV, MV, and LV systems.</li><li>Review the design of uninterruptible power supply systems, earthing and bonding systems, and lightning protection systems.</li><li>Prepare and review specifications and datasheets for electrical equipment, including generators, transformers, switchgear, motors, cables, distribution boards, and control panels.</li><li>Verify compliance with applicable international codes, standards, client specifications, and project requirements, including relevant IEC standards.<br><br></li></ul>Hazardous Areas and Technical Assurance<br><br><ul><li>Participate in hazardous area classification studies and verify the selection and classification of Ex equipment against the applicable zone, gas group, temperature class, and protection requirements.</li><li>Identify design gaps, deviations, and non-compliances, and raise clear, technically justified review comments.</li><li>Conduct interdisciplinary design reviews and checks in coordination with process, mechanical, instrumentation, civil, structural, and safety disciplines.</li><li>Support the verification and assurance of safety-critical elements related to electrical systems.</li><li>Participate in root cause analysis studies concerning electrical failures, incidents, and equipment performance issues.<br><br></li></ul>Documentation and Coordination<br><br><ul><li>Prepare and review technical reports, design review reports, comment registers, verification records, and other project documentation.</li><li>Participate in technical and client meetings and provide independent engineering input and recommendations.</li><li>Coordinate projects within the team and act as the client focal point when required.</li><li>Ensure that all activities comply with project procedures and applicable health, safety, environmental, and quality requirements.</li><li>Mentor and train junior electrical engineers in design, engineering calculations, technical reviews, and project activities.<br><br></li></ul>Site and Field Activities<br><br><ul><li>Participate in site and field activities, including as-built verification, functional testing, inspection and test witnessing, technical audits, and design compliance assessments.</li><li>Perform site activities during the fabrication, construction, pre-commissioning, commissioning, and operational phases of oil and gas projects.</li><li>Undertake mandatory onshore and offshore site visits as required by project assignments and operational needs.<br><br></li></ul><strong>Required Qualifications<br><br></strong><ul><li>Bachelor’s or Master’s degree in Electrical Engineering </li><li>Professional engineering certification, or demonstrated progress toward obtaining certification, is an advantage.</li><li>Membership in a recognized professional engineering institution is desirable.<br><br></li></ul><strong>Experience Requirements<br><br></strong><ul><li>Approximately 10–12 years of relevant electrical engineering experience, preferably in oil and gas or petrochemical projects.</li><li>Experience working with engineering design consultancies and/or EPC organizations is mandatory.</li><li>Proven exposure to FEED and detailed design phases, including electrical design reviews, technical verification, and assurance activities.<br><br></li></ul><strong>Technical Skills & Competencies<br><br></strong><ul><li>Strong working knowledge of international electrical codes and standards, including IEC, IEEE, NFPA, NEC, and BS EN standards.</li><li>Proven experience with electrical power generation and distribution systems covering HV, MV, and LV systems.</li><li>Sound understanding of hazardous area classification, electrical equipment selection for hazardous areas, and safety-critical electrical systems.</li><li>Ability to review electrical calculations and design deliverables, identify technical issues, and recommend practical engineering solutions.</li><li>Strong technical writing, reporting, and engineering documentation skills.</li><li>Proficiency in spoken and written English.</li></ul>
<p><br></p> <b>ABOUT THE ROLE</b> <p>Headquartered in the UAE, ADASI is a reliable end-to-end solution provider within the autonomous systems industry, with a stronghold in the MENA region. Focused on the further development and evolution of our core activities, we constantly strive to develop and strengthen our customer s technological capabilities.<br> <br>Identifying the need for autonomous systems in the defence sector, we create robust unmanned systems that are capable of performing challenging and strategically demanding tasks. We deliver this by tailoring our level of expertise and creative ideas to merge with the latest innovations and technological advancements</p> <p>We are seeking an experienced Principal Engineer - Guidance & Control to lead the design, development, and verification of guidance algorithms, flight-control laws, and autopilot functions for advanced aerospace and defence platforms. The role involves complex control-system analysis, simulation, and validation, working closely with multidisciplinary engineering teams to deliver safe, stable, and high-performance solutions.</p> <b>RESPONSIBILITIES</b> <ul> <li>Lead the design and development of guidance algorithms, control laws, autopilot functions, and control-allocation systems.</li> <li>Perform flight-dynamics modelling, stability analysis, robustness assessment, and nonlinear simulations.</li> <li>Develop and validate control solutions using MATLAB/Simulink and relevant engineering tools.</li> <li>Conduct verification and validation through simulation, SIL/PIL/HIL, ground testing, and flight testing.</li> <li>Investigate control-system anomalies, performance issues, and simulation-to-test discrepancies.</li> <li>Ensure requirements traceability, technical documentation, and compliance with applicable safety and airworthiness requirements.</li> <li>Lead technical work packages, conduct engineering reviews, and mentor other engineers.</li> </ul> <b>BASIC QUALIFICATIONS</b> <ul> <li>Bachelor s degree in Aerospace, Aeronautical, Electrical, Mechanical, Control Engineering, Robotics, Applied Mathematics, or a related discipline.</li> <li>Typically 10+ years of relevant aerospace or safety-critical control-system engineering experience.</li> <li>Strong hands-on experience in control-law design, guidance systems, autopilot functions, or control allocation.</li> <li>Solid understanding of flight dynamics, control theory, stability, robustness, and nonlinear simulation.</li> <li>Practical experience with MATLAB/Simulink or equivalent engineering tools.</li> <li>Experience in control-system verification, simulation, and testing.</li> <li>Demonstrated ability to lead complex engineering activities independently.</li> </ul> <b>PREFERRED QUALIFICATIONS</b> <ul> <li>Master s degree or PhD in Guidance, Control Systems, Aerospace Engineering, Flight Control, Robotics, or a related field.</li> <li>Experience with aircraft, UAVs, missiles, spacecraft, or other dynamic aerospace platforms.</li> <li>Knowledge of advanced control techniques, gain scheduling, uncertainty analysis, and guidance algorithms.</li> <li>Experience with Python, C/C++, Stateflow, and embedded real-time systems.</li> <li>Exposure to SIL/PIL/HIL, ground testing, flight testing, and simulation-to-test correlation.</li> <li>Familiarity with aerospace safety, airworthiness, software assurance, and configuration-management processes.</li> <li>Experience mentoring engineers and supporting technical design reviews.</li> </ul> <br><p><strong>Desired Candidate Profile</strong></p><b>BASIC QUALIFICATIONS</b> <ul> <li>Bachelor s degree in Aerospace, Aeronautical, Electrical, Mechanical, Control Engineering, Robotics, Applied Mathematics, or a related discipline.</li> <li>Typically 10+ years of relevant aerospace or safety-critical control-system engineering experience.</li> <li>Strong hands-on experience in control-law design, guidance systems, autopilot functions, or control allocation.</li> <li>Solid understanding of flight dynamics, control theory, stability, robustness, and nonlinear simulation.</li> <li>Practical experience with MATLAB/Simulink or equivalent engineering tools.</li> <li>Experience in control-system verification, simulation, and testing.</li> <li>Demonstrated ability to lead complex engineering activities independently.</li> </ul> <b>PREFERRED QUALIFICATIONS</b> <ul> <li>Master s degree or PhD in Guidance, Control Systems, Aerospace Engineering, Flight Control, Robotics, or a related field.</li> <li>Experience with aircraft, UAVs, missiles, spacecraft, or other dynamic aerospace platforms.</li> <li>Knowledge of advanced control techniques, gain scheduling, uncertainty analysis, and guidance algorithms.</li> <li>Experience with Python, C/C++, Stateflow, and embedded real-time systems.</li> <li>Exposure to SIL/PIL/HIL, ground testing, flight testing, and simulation-to-test correlation.</li> <li>Familiarity with aerospace safety, airworthiness, software assurance, and configuration-management processes.</li> <li>Experience mentoring engineers and supporting technical design reviews.</li> </ul>
<p>At Sener, we design and deliver some of the world's most complex and innovative infrastructure projects. As we continue expanding our Airports business across the UAE and the wider region, we are seeking experienced Project Managers to lead the delivery of major airport developments and expansions.</p><p>If you have a strong background in airport infrastructure, thrive in complex multidisciplinary environments, and are passionate about delivering world-class aviation projects, we would like to hear from you.</p><p> <strong>Key Job Responsibilities:</strong> </p><p>As a Project Manager, you will be responsible for leading the successful delivery of airport infrastructure projects from planning through execution and close-out. Your responsibilities will include:</p><ul><li> <p>Managing airport projects across Airside and/or Landside environments.</p> </li><li> <p>Leading multidisciplinary engineering and design teams throughout all project phases.</p> </li><li> <p>Coordinating with airport authorities, operators, clients, contractors, and regulatory bodies.</p> </li><li> <p>Managing project scope, schedules, budgets, risks, and quality objectives.</p> </li><li> <p>Driving technical excellence and effective design management processes.</p> </li><li> <p>Monitoring project performance and implementing proactive mitigation measures.</p> </li><li> <p>Ensuring compliance with aviation regulations, industry standards, and client requirements.</p> </li><li> <p>Supporting business development activities, proposals, and client presentations when required.</p> </li><li> <p>Mentoring project teams and fostering a collaborative, high-performance culture.</p> </li></ul><p> <strong>Job Requirements:</strong> </p><ul><li> <p>Bachelor's degree in civil engineering, Transportation Engineering, Airport Engineering, or a related discipline.</p> </li><li> <p>Master's degree in engineering management or a related field is an advantage.</p> </li><li> <p>PMP or equivalent Project Management certification preferred.</p> </li><li> <p>13-16+ years of professional experience within airport infrastructure projects.</p> </li><li> <p>Strong understanding of airport planning, design coordination, and project delivery methodologies.</p> </li><li> <p>Working knowledge of ICAO, IATA, and international airport design standards.</p> </li><li> <p>Experience managing projects from concept design through detailed design and delivery stages.</p> </li><li> <p>Proven project management experience in Airside and/or Landside airport developments.</p> </li><li> <p>Experience in Greenfield and Brownfield airport projects is highly desirable.</p> </li><li> <p>Strong design engineering background with progression into project leadership roles.</p> </li><li> <p>Demonstrated experience managing multidisciplinary teams and stakeholders.</p> </li><li> <p>Experience overseeing project schedules, budgets, resources, risks, and project controls.</p> </li><li> <p>Previous experience within international engineering consultancy environments is preferred.</p> </li><li> <p>GCC airport project experience is highly desirable.</p> </li><li> <p>Excellent English.</p> </li><li> <p>Strong analytical and problem-solving abilities.</p> </li><li> <p>Ability to work effectively in complex, multicultural, and fast-paced environments.</p> </li><li> <p>Outstanding organizational and project planning skills.</p> </li></ul><p> <strong>Why Join Sener?</strong> </p><ul><li> <p>Multinational working environment</p> </li><li> <p>End-to-end project ownership</p> </li><li> <p>Career development and growth opportunities</p> </li><li> <p>Mentorship and continuous learning</p> </li><li> <p>Hybrid working environment</p> </li><li> <p>Competitive salary and benefits</p> </li><li> <p>Stable, long-term career with an innovative company</p> </li><li> <p>Collaborative and supportive team culture</p> </li><li> <p>Opportunity to make a real impact</p> </li></ul><p> <strong>BE PART OF A MISSION THAT MATTER ,JOIN SENER</strong> </p><p>If you are passionate, values meaningful work, and want to be part of a company that builds things that matter.</p><p><strong>Desired Candidate Profile</strong></p><ul><li> <p>Bachelor's degree in civil engineering, Transportation Engineering, Airport Engineering, or a related discipline.</p> </li><li> <p>Master's degree in engineering management or a related field is an advantage.</p> </li><li> <p>PMP or equivalent Project Management certification preferred.</p> </li><li> <p>13-16+ years of professional experience within airport infrastructure projects.</p> </li><li> <p>Strong understanding of airport planning, design coordination, and project delivery methodologies.</p> </li><li> <p>Working knowledge of ICAO, IATA, and international airport design standards.</p> </li><li> <p>Experience managing projects from concept design through detailed design and delivery stages.</p> </li><li> <p>Proven project management experience in Airside and/or Landside airport developments.</p> </li><li> <p>Experience in Greenfield and Brownfield airport projects is highly desirable.</p> </li><li> <p>Strong design engineering background with progression into project leadership roles.</p> </li><li> <p>Demonstrated experience managing multidisciplinary teams and stakeholders.</p> </li><li> <p>Experience overseeing project schedules, budgets, resources, risks, and project controls.</p> </li><li> <p>Previous experience within international engineering consultancy environments is preferred.</p> </li><li> <p>GCC airport project experience is highly desirable.</p> </li><li> <p>Excellent English.</p> </li><li> <p>Strong analytical and problem-solving abilities.</p> </li><li> <p>Ability to work effectively in complex, multicultural, and fast-paced environments.</p> </li><li> <p>Outstanding organizational and project planning skills.</p> </li></ul>
Job Title: Senior Structural Health Monitoring Specialist<p><strong>Location:</strong> United Arab Emirates (Remote)</p><p><strong>Employment Type:</strong> Full-Time</p><p><strong>Work Arrangement:</strong> 100% Remote — Work From Home</p><p><strong>Level:</strong> Senior</p>About the Role<p>We are seeking an experienced Senior Structural Health Monitoring Specialist to support the assessment, monitoring, and performance evaluation of bridges, buildings, tunnels, industrial facilities, and other critical infrastructure. The successful candidate will apply structural engineering principles, sensor data analysis, condition assessment methodologies, and advanced monitoring technologies to evaluate structural integrity, identify potential deterioration, and support informed maintenance decisions. This fully remote position focuses on monitoring data interpretation, structural performance analysis, technical reporting, and virtual collaboration with multidisciplinary engineering teams.</p>Key Responsibilities<ul><li>Analyze structural health monitoring (SHM) data collected from bridges, buildings, tunnels, and other infrastructure assets.</li><li>Interpret measurements from strain gauges, accelerometers, displacement sensors, inclinometers, temperature sensors, and other monitoring systems.</li><li>Evaluate structural behavior under operational loads, environmental conditions, vibration, and changing service demands.</li><li>Identify abnormal response patterns, potential deterioration indicators, and anomalies in monitoring datasets.</li><li>Develop data-driven monitoring strategies, performance indicators, and threshold-based alert methodologies.</li><li>Support structural condition assessments through time-series analysis, trend identification, statistical evaluation, and engineering interpretation.</li><li>Review sensor installation records, monitoring system configurations, data quality, and calibration documentation.</li><li>Apply analytical methods and, where appropriate, finite element modeling to compare observed structural behavior with predicted performance.</li><li>Support fatigue assessment, vibration analysis, deformation monitoring, and long-term structural performance evaluation.</li><li>Prepare technical reports, monitoring summaries, engineering recommendations, and maintenance prioritization documents.</li><li>Collaborate remotely with structural engineers, asset managers, instrumentation specialists, and infrastructure operators.</li><li>Contribute to risk assessments, monitoring program improvements, and predictive maintenance initiatives.</li></ul>Qualifications and Experience<ul><li>Bachelor's or master's degree in Structural Engineering, Civil Engineering, Mechanical Engineering, or a related discipline.</li><li>Significant professional experience in structural health monitoring, structural assessment, infrastructure diagnostics, or structural engineering analysis.</li><li>Strong understanding of structural behavior, load effects, material deterioration, vibration, fatigue, and serviceability.</li><li>Experience interpreting data from structural sensors and monitoring instrumentation.</li><li>Proficiency in data analysis tools such as MATLAB, Python, or equivalent engineering software.</li><li>Familiarity with structural analysis and finite element modeling software.</li><li>Knowledge of signal processing, time-series analysis, anomaly detection, and statistical methods used in monitoring applications.</li><li>Understanding of relevant structural design, inspection, assessment, and monitoring standards.</li><li>Experience preparing technical reports, condition assessment documentation, and engineering recommendations.</li><li>Strong analytical, problem-solving, and technical communication skills.</li><li>Ability to work independently and coordinate effectively with geographically distributed engineering teams.</li></ul>What We Offer<ul><li>Competitive compensation based on qualifications, experience, and role responsibilities.</li><li><strong>100% remote work-from-home arrangement</strong>, with no routine office attendance required.</li><li>Opportunities to support infrastructure safety, asset management, and advanced monitoring projects.</li><li>Professional development in structural diagnostics, monitoring technologies, and data-driven engineering.</li><li>A collaborative working environment focused on technical excellence, innovation, and infrastructure reliability.</li></ul>How to Apply<p>Interested candidates should submit an updated CV highlighting their structural health monitoring experience, sensor data analysis expertise, structural assessment projects, and relevant technical qualifications.</p><p><strong>Email Subject Line:</strong> Application – Senior Structural Health Monitoring Specialist (UAE Remote)</p><p><strong>Important:</strong> Candidates should confirm applicable employment arrangements, residency requirements, and work authorization before accepting an offer. This is a fully remote engineering position focused on monitoring data analysis, structural performance assessment, technical reporting, and virtual consultation. Physical inspections, sensor installation, equipment maintenance, and on-site measurements must be conducted by appropriately qualified local personnel.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><strong>Role purpose</strong></span><p><span>The Senior Power Pack Design Engineer leads the design, development, and optimization of hydraulic power pack systems and their integration with vehicle chassis and related systems. The role translates technical specifications and customer requirements into safe, reliable and manufacturable designs, guiding the work from concept and calculations through drawing release, prototype validation and production support.</span></p><br><br><span><strong>Key responsibilities & Job Description</strong></span><ul><li><p><span>Power pack design and system integration</span></p><br><br></li><li><p><span>Develop and optimize hydraulic power pack designs in line with project specifications, customer requirements, operating conditions and applicable standards.</span></p><br><br></li><li><p><span>Select and size suitable pumps, motors, reservoirs, filters, coolers, valves, manifolds, piping, instrumentation and other system components.</span></p><br><br></li><li><p><span>Prepare and verify engineering calculations, hydraulic schematics, layouts, 3D models, assembly drawings, bills of materials and design specifications.</span></p><br><br></li><li><p><span>Finalize the design, performance and integration of the engine, cooling system, transmission, brake system and axles within the chassis, ensuring compatibility across interfaces and operating requirements.</span></p><br><br></li><li><p><span>Assess packaging, routing, material selection, access for maintenance, assembly sequence, weight, manufacturability and cost when optimizing the complete system.</span></p><br><br></li></ul><span><strong>Technical leadership and design assurance</strong></span><ul><li><p><span>Review and approve designs, drawings, calculations and technical specifications prepared by engineers reporting to the role; provide clear technical direction and feedback.</span></p><br><br></li><li><p><span>Set and maintain design practices, drawing standards, revision control and engineering checks for assigned projects.</span></p><br><br></li><li><p><span>Identify design risks, interface issues and performance constraints early, and coordinate practical engineering solutions with relevant stakeholders.</span></p><br><br></li><li><p><span>Prototype, testing and continuous improvement</span></p><br><br></li><li><p><span>Oversee prototype build, commissioning and testing; define or support test plans covering performance, durability, reliability and safety.</span></p><br><br></li><li><p><span>Review test and field data, investigate failures or non-conformities, and implement design changes based on verified results.</span></p><br><br></li><li><p><span>Monitor developments in power pack, hydraulic and vehicle systems technology and apply suitable innovations to improve performance, efficiency, reliability and lifecycle cost.</span></p><br><br></li></ul><span><strong>Project delivery and compliance</strong></span><ul><li><p><span>Coordinate with product development, manufacturing, procurement, suppliers, quality assurance and other engineering teams to resolve technical matters and support on-time project completion.</span></p><br><br></li><li><p><span>Confirm that designs meet applicable industry standards, safety requirements, environmental guidelines, customer specifications and internal engineering procedures.</span></p><br><br></li><li><p><span>Prepare and maintain technical documentation, including design reports, calculations, manuals, drawings, test records and change documentation relevant to each project.</span></p><br><br></li><li><p><span>Provide regular, concise updates on design progress, risks, resource needs and system performance to the Line Manager and Director.</span></p><br><br></li></ul><span><strong>Technical and professional competencies</strong></span><ul><li><p><span>Proficiency with 3D CAD and engineering drawing tools; experience with hydraulic design or simulation software is preferred.</span></p><br><br></li><li><p><span>Strong understanding of design for manufacture and assembly, tolerance management, materials, failure analysis and product safety.</span></p><br><br></li><li><p><span>Ability to interpret customer specifications and applicable engineering standards and convert them into verified design requirements.</span></p><br><br></li><li><p><span>Clear technical communication, sound decision-making and effective coordination with internal teams and external suppliers.</span></p><br><br></li><li><p><span>Organized approach to managing multiple design activities, engineering changes, documentation and project deadlines.</span></p><br><br></li></ul><ul><li><p><span><strong>Qualifications and experience</strong></span></p><br><br><ul><li><p><span>Bachelor’s degree in Mechanical Engineering, Automotive Engineering, Mechatronics or a closely related discipline; a relevant postgraduate qualification is an advantage.</span></p><br><br></li><li><p><span>Typically 8 or more years of relevant design engineering experience, including demonstrated responsibility for hydraulic power packs, mobile equipment or vehicle system integration.</span></p><br><br></li><li><p><span>Experience designing or integrating hydraulic systems and working with engine, cooling, transmission, brake and axle interfaces in a chassis or comparable equipment platform.</span></p><br><br></li><li><p><span>Working knowledge of design calculations, component sizing, hydraulic schematics, engineering drawings, bills of materials, prototype validation and manufacturing support.</span></p><br><br></li><li><p><span>Experience reviewing engineering work and providing technical guidance to engineers or design teams.</span><br></p><br><br></li></ul></li></ul><br><br>
<br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Reporting to the Engineering Execution Center Manager, the ETO CAD Designer is responsible for managing a team of discipline engineers comprised of Mechanical, Electrical, Instrumentation, Piping, and Structural fields. The ETO CAD Designer is ultimately responsible for the quality of the engineering work being executed and delivered by the team. The role also provides training and support to the team on technical matters related to discipline specific engineering.</p><br><ul><li>Lead technical activities and provide guidance on mechanical, electrical, instrumentation, piping and structural design fields, and facilitate the integration of the team with other teams within the Engineering Execution Center.</li><li>Review, validate, and monitor work of mechanical, electrical, instrumentation, piping, and structural engineers and designers.</li><li>Advise and assist team, projects and construction managers, QA/QC, and sub-suppliers with the interpretation and clarification ofconstruction documents.</li><li>Monitor and assess engineering performance and quality and provide feedback for improvement.</li><li>Undertake site or sub-supplier visits as required to investigate/troubleshoot/resolve technical issues.</li><li>Assess team skills/competencies and create individual development plans and training programs to develop the team.</li><li>Monitor resource loading and develop action plans for staffing as required.</li><li>Review and update practices, procedures, and forms required for engineering execution.</li><li>Rollout out new engineering processes and software. Review and improve the existing process and system.</li><li>Check, approve, and validate engineering deliverables for proposals and projects.</li><li>Undertake FAT's and other inspections/visits as required.</li><li>Participate in 3D model, HAZOP review, and other design review meetings and provide input.</li><li>Participate in client meetings as required to provide technical input and execution guidance.</li><li>Undertake root cause analysis and provide reports to non-conformances identified on projects.</li><li>Assist with recruitment and undertake interviews as required.</li><li>Participate in review of third-party engineering company competencies.</li><li>Review and approve labor hours estimation and review of scope matrix/technical clarifications prepared by discipline engineers.</li><li>Advise and assist project and discipline engineers with the interpretation and clarification of applicable industry codesand client specification requirements.</li><li>Ensure engineers within the team provide input on the "Lessons learned" process and utilize findings from the process to update tools and processes.</li><li>Guide the team on the "Management of Change" process and promote its utilization by discipline engineers during the project execution.</li><li>Provide advice to the team in identifying the right engineering design vendor and executing the project in line with the schedule and budget.</li></ul><p>Education Qualification:</p><br><p>* Bachelor Degree in Engineering Discipline (Chemical,Mechanical, E&I, Structural, Piping, or Equivalent)</p><br><p>Experience :</p><br><p>* <span>Years of experience required: 0-3 years</span></p><br><p>* Deep understanding of specific engineering principles,practices and tools. Proficiency in relevant software andtechnologies.</p><br><p>* Knowledge of relevant industry standards.</p><br><p>* Strong leadership and team management skills.</p><br><p>* Proven experience in managing complex engineeringprojects. Familiarity with project managementmethodologies and tools.</p><br><p>* Experience in executing proposal, FEED, and detailengineering of oil and gas projects.</p><br><p>* Excellent verbal and written communication skills. Abilityto communicate technical information clearly to nontechnical stakeholders.</p><br><p>* Strong analytical and problem-solving skills</p><br><p>Expertise :</p><br><p>* Thorough knowledge on reputed clientspecifications and international codes/standards.</p><br><p>* All project phases of execution from engineering tostart up, including pre-commissioning,commissioning and troubleshooting.</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>
<p>A construction site site engineer is being recruited to be responsible for construction site management, drawing reconciliation, technical coordination and engineering progress and quality follow-up.</p><p>I. Job duties</p><ul><li><p>Be responsible for the day-to-day construction management and on-site supervision of construction sites.</p></li><li><p>Be able to independently read, understand and check construction drawings.</p></li><li><p>supervise on-site construction in accordance with construction drawings and technical specifications.</p></li><li><p>Follow up on project progress, construction quality and site safety.</p></li><li><p>Identify problems where the drawings are inconsistent with the actual situation on the ground and address them accordingly.</p></li><li><p>Coordinate construction personnel, subcontractors and project teams.</p></li><li><p>Organize construction records, site reports and related engineering information.</p></li><li><p>Assist the project manager with field technical issues.</p></li></ul><p>II. Requirements for appointment</p><ul><li><p>Civil Engineering, Building Engineering or a related major, with a bachelor's degree or higher.</p></li><li><p>At least 2 years of experience working on a construction site.</p></li><li><p>Must have the ability to independently read, understand and check construction drawings.</p></li><li><p>Be familiar with building construction processes and site management.</p></li><li><p>Have good communication, coordination and problem solving skills.</p></li><li><p>Have basic English communication skills.</p></li><li><p>Priority for those with experience in construction projects in the UAE or overseas.</p></li><li><p>Priority is given to those who hold relevant engineering qualifications or certificates.</p></li></ul><p>III. Working treatment</p><ul><li><p>Location: Dubai, United Arab Emirates</p></li><li><p>Hours: Monday to Saturday</p></li><li><p>Salary: negotiable, based on experience and ability</p></li><li><p>Visas and medical insurance: provided in accordance with company policy</p></li></ul><p>�You can also recommend a suitable foreign engineer.�Recruitment | Construction Site Engineer (Foreign) There are suitable foreign engineers you can recommend</p><p>�Location: Dubai, UAE</p><p>A foreign construction site site engineer is being recruited to be responsible for construction site management, drawing reconciliation, technical coordination and engineering progress and quality follow-up.</p><p>I. Job duties</p><ul><li><p>Be responsible for the day-to-day construction management and on-site supervision of construction sites.</p></li><li><p>Be able to independently read, understand and check construction drawings.</p></li><li><p>supervise on-site construction in accordance with construction drawings and technical specifications.</p></li><li><p>Follow up on project progress, construction quality and site safety.</p></li><li><p>Identify problems where the drawings are inconsistent with the actual situation on the ground and address them accordingly.</p></li><li><p>Coordinate construction personnel, subcontractors and project teams.</p></li><li><p>Organize construction records, site reports and related engineering information.</p></li><li><p>Assist the project manager with field technical issues.</p></li></ul><p>II. Requirements for appointment</p><ul><li><p>Civil Engineering, Building Engineering or a related major, with a bachelor's degree or higher.</p></li><li><p>At least 2 years of experience working on a construction site.</p></li><li><p>Must have the ability to independently read, understand and check construction drawings.</p></li><li><p>Be familiar with building construction processes and site management.</p></li><li><p>Have good communication, coordination and problem solving skills.</p></li><li><p>Have basic English communication skills.</p></li><li><p>Priority for those with experience in construction projects in the UAE or overseas.</p></li><li><p>Priority is given to those who hold relevant engineering qualifications or certificates.</p></li></ul><p>III. Working treatment</p><ul><li><p>Location: Dubai, United Arab Emirates</p></li><li><p>Hours: Monday to Saturday</p></li><li><p>Salary: negotiable, based on experience and ability</p></li><li><p>Visas and medical insurance: provided in accordance with company policy</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Civil Engineering, Building Engineering or a related major, with a bachelor's degree or higher.</p></li><li><p>At least 2 years of experience working on a construction site.</p></li><li><p>Must have the ability to independently read, understand and check construction drawings.</p></li><li><p>Be familiar with building construction processes and site management.</p></li><li><p>Have good communication, coordination and problem solving skills.</p></li><li><p>Have basic English communication skills.</p></li><li><p>Priority for those with experience in construction projects in the UAE or overseas.</p></li><li><p>Priority is given to those who hold relevant engineering qualifications or certificates.</p></li></ul>
Job Description<br><br>We are seeking talented and motivated UAE National Process Engineers to join our Engineering and Projects team. This opportunity is open to fresh graduates and experienced professionals with up to 10 years of experience in the Oil & Gas industry. The role would be based in Sharjah, UAE. This recruitment activity supports the organization's Emiratization objectives and commitment to hiring UAE Nationals.<br><br>Responsibilities<br><br>For Graduate and Junior Engineers (0-3 Years)<br><br>Assist in the development of process engineering deliverables for oil and gas projects.<br><br>Support the preparation and review of Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), and process calculations.<br><br>Perform basic process simulations and engineering calculations under supervision.<br><br>Assist in preparing equipment datasheets and process design documentation.<br><br>Participate in HAZOP, design review, and risk assessment workshops.<br><br>Coordinate with Mechanical, Piping, Electrical, Instrumentation, Civil, and Operations teams.<br><br>Support commissioning, start-up, and troubleshooting activities.<br><br>Contribute to process optimization and continuous improvement initiatives.<br><br>Ensure Compliance With Company HSE And Quality Requirements.<br><br>For Mid-Level and Senior Engineers (4-10 Years)<br><br>Develop and review process engineering deliverables for FEED and Detailed Engineering projects.<br><br>Perform process design calculations including material and energy balances.<br><br>Prepare and review: Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), Equipment Datasheets, Process Design Basis, Utility Consumption Calculations, Relief and Flare System Calculations, Cause & Effect Matrices<br><br>Conduct process simulation studies using industry-standard software.<br><br>Participate in HAZOP, HAZID, SIL, and Design Review workshops.<br><br>Support sizing and selection of process equipment, including vessels, pumps, compressors, heat exchangers, and control valves.<br><br>Interface with clients, licensors, vendors, and multidisciplinary engineering teams.<br><br>Provide technical support during construction, commissioning, start-up, and operational phases.<br><br>Identify opportunities for process optimization, energy efficiency, and plant performance improvements.<br><br>Mentor and support junior engineers.<br><br>Qualifications<br><br>Fresh Graduates (0-3 Years) <br><br>Bachelor's degree in chemical engineering<br><br>Internship or project experience within Oil & Gas, Petrochemical, Energy, or EPC industries is an advantage.<br><br>Experienced Candidates (4-10 Years)<br><br>Bachelor's degree in chemical engineering, Process Engineering, or a related discipline.<br><br>3-10 years of relevant experience in Oil & Gas, LNG, Petrochemical, Refining, Offshore, Energy, or EPC projects.<br><br>Experience in FEED, Detailed Design, Brownfield, Greenfield, EPC is preferred.<br><br>Same Posting Description for Internal and External Candidates<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
<p>At Emirates, we believe in connecting the world, to and through, our global hub in Dubai and in constantly innovating to ensure our customers 'Fly Better'.</p> <p></p> <p>Join our <strong>Quality Engineering Chapter</strong> as we shape the next generation of Quality Engineering across Emirates Group IT. As a <strong>Lead Quality Assurance Engineer </strong>within Quality Engineering Services, you will combine strong software quality and automation engineering expertise with emerging AI capabilities to help define, build and scale modern QE practices across the organisation. Working as part of a small central Chapter team, you will develop reusable approaches, standards and AI-enabled capabilities that help engineering teams identify risk earlier, improve test coverage and make evidence-based quality decisions at greater speed. This is a hands-on technical role for someone who wants to explore how Generative and Agentic AI can transform Quality Engineering while ensuring human judgement, governance and engineering excellence remain at the centre.</p> <p></p> <p> <strong>In this role you will:</strong> </p> <ul> <li>Work closely with project members, technical product owners, architects and software engineers to understand the complete context of deliveries, translate complex functional and non-functional requirements in robust end to end tests that exercise the business process.</li> <li>Liaise with other release train teams to manage the testing of cross dependencies.</li> <li>Ensure Test Tools are configured correctly and accurately to support the collection of metrics for program and enterprise-wide dashboards.</li> <li>Support and guide Software Engineers to write and maintain automated functional tests through continuous integration.</li> <li>Implement, maintain and adapt automation frameworks. Test harnesses to make end to end tests robust.</li> <li>Ensure Quality Gate requirements are understood by the team and met.</li> <li>Support the Principal Quality Assurance Engineer with the coordination of major delivery initiatives across multiple domains and environments, ensuring no customer or business impact.</li> <li>Support the team in their development, training and understanding of technologies and processes.</li> </ul> <h4>Qualification</h4> <p> <strong>To be considered for the role, you must meet the below requirements:</strong> </p> <ul> <li>Degree in Computer Science, Computer Engineering or related field or relevant experience. An iSQI Certified Agile Tester.</li> <li>Min of 5 years of Information technology experience (with an experience in quality engineering roles involving the building of complex, scalable and large software solutions in digital, data or enterprise domain). </li> <li>Experience in quality engineering roles involving the building of complex, scalable and large software solutions in digital, data or enterprise domain.</li> <li>Solid experience as a Software Quality engineering lead or equivalent position looking after multiple products.</li> <li>Experience in providing product input on business process flows and scenario mapping for business solutions.</li> <li>Experience in understanding and applying system thinking to advanced technology solutions for large, complex organisations in a multi-functional environment.</li> </ul> <p> <br> </p> <p> <strong>Knowledge/skills:</strong> </p> <ul> <li>Hands-on experience applying <strong>Generative AI and AI-assisted engineering within Quality Engineering</strong>, including test design, automation, analysis or defect investigation.</li> <li>Experience with <strong>AI agents, reusable AI skills or agentic workflows</strong> within the software delivery lifecycle.</li> <li>Ability to <strong>critically evaluate AI-generated outputs</strong>, recognising issues such as hallucination, incomplete coverage and false confidence.</li> <li>Strong <strong>modern Quality Engineering and automation skills</strong>, with the ability to create reusable practices, frameworks or capabilities that can scale across teams.</li> <li>Experience with creating and maintaining large scale test data frameworks to support test automation.</li> <li>3+ years of experience using one or more of the following automation tools: Selenium components (WebDriver, Grid, etc.), Protractor, Jasmin, Cucumber, Gherkin, JUnit, TestNG.</li> <li>Experience using git SCM tools, GitHub or Bitbucket or similar tools.</li> <li>Proficiency in at least 2 different programming languages, preferably JavaScript and Java.</li> <li>Experienced with coding best practices and defining coding guidelines.</li> <li>Highly experienced with developing automation frameworks from scratch built for UI and API testing and integration with CI pipelines.</li> <li>Experience using CI tools like Jenkins, Azure DevOps or equivalent.</li> <li>Strong expertise with context driven and exploratory testing with practical experience of using a number of testing heuristics.</li> </ul> <p>Leadership Role: No</p> <p>Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotel stays around the world. Find out what it s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers .</p><p><strong>Desired Candidate Profile</strong></p><h4>Qualification</h4> <p> <strong>To be considered for the role, you must meet the below requirements:</strong> </p> <ul> <li>Degree in Computer Science, Computer Engineering or related field or relevant experience. An iSQI Certified Agile Tester.</li> <li>Min of 5 years of Information technology experience (with an experience in quality engineering roles involving the building of complex, scalable and large software solutions in digital, data or enterprise domain). </li> <li>Experience in quality engineering roles involving the building of complex, scalable and large software solutions in digital, data or enterprise domain.</li> <li>Solid experience as a Software Quality engineering lead or equivalent position looking after multiple products.</li> <li>Experience in providing product input on business process flows and scenario mapping for business solutions.</li> <li>Experience in understanding and applying system thinking to advanced technology solutions for large, complex organisations in a multi-functional environment.</li> </ul> <p> <br> </p> <p> <strong>Knowledge/skills:</strong> </p> <ul> <li>Hands-on experience applying <strong>Generative AI and AI-assisted engineering within Quality Engineering</strong>, including test design, automation, analysis or defect investigation.</li> <li>Experience with <strong>AI agents, reusable AI skills or agentic workflows</strong> within the software delivery lifecycle.</li> <li>Ability to <strong>critically evaluate AI-generated outputs</strong>, recognising issues such as hallucination, incomplete coverage and false confidence.</li> <li>Strong <strong>modern Quality Engineering and automation skills</strong>, with the ability to create reusable practices, frameworks or capabilities that can scale across teams.</li> <li>Experience with creating and maintaining large scale test data frameworks to support test automation.</li> <li>3+ years of experience using one or more of the following automation tools: Selenium components (WebDriver, Grid, etc.), Protractor, Jasmin, Cucumber, Gherkin, JUnit, TestNG.</li> <li>Experience using git SCM tools, GitHub or Bitbucket or similar tools.</li> <li>Proficiency in at least 2 different programming languages, preferably JavaScript and Java.</li> <li>Experienced with coding best practices and defining coding guidelines.</li> <li>Highly experienced with developing automation frameworks from scratch built for UI and API testing and integration with CI pipelines.</li> <li>Experience using CI tools like Jenkins, Azure DevOps or equivalent.</li> <li>Strong expertise with context driven and exploratory testing with practical experience of using a number of testing heuristics.</li> </ul>
Job Title: Senior Control Systems Specialist<p><strong>Location:</strong> United Arab Emirates (Remote)</p><p><strong>Employment Type:</strong> Full-Time</p><p><strong>Work Arrangement:</strong> 100% Remote — Work From Home</p><p><strong>Level:</strong> Senior</p>About the Role<p>We are seeking an experienced and technically proficient Senior Control Systems Specialist to support the design, configuration, monitoring, optimization, and maintenance of industrial control systems. The successful candidate will help improve system reliability, operational efficiency, process automation, and control system security while ensuring compliance with applicable technical standards and organizational requirements.</p><p>The ideal candidate will possess strong expertise in programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), industrial automation, and control system troubleshooting. This role requires analytical thinking, technical problem-solving, project coordination, and the ability to provide remote technical support to engineering and operations teams.</p>Key Responsibilities<ul><li><strong>Control Systems Management:</strong> Oversee the configuration, monitoring, and optimization of industrial control systems to support reliable and efficient operations.</li><li><strong>PLC Programming:</strong> Develop, review, troubleshoot, and optimize PLC programs, control logic, and automation sequences according to project specifications.</li><li><strong>SCADA Systems:</strong> Support the configuration, maintenance, and improvement of SCADA platforms, including alarm management, process visualization, data acquisition, and system monitoring.</li><li><strong>Distributed Control Systems:</strong> Provide technical support for DCS environments, including control loop configuration, process monitoring, system diagnostics, and performance optimization.</li><li><strong>System Design and Integration:</strong> Review control system architectures, functional specifications, wiring diagrams, instrumentation layouts, and integration requirements.</li><li><strong>Automation Engineering:</strong> Develop and improve automation strategies to enhance process consistency, reduce manual intervention, and improve operational performance.</li><li><strong>Troubleshooting and Diagnostics:</strong> Investigate control system faults, communication failures, software issues, sensor abnormalities, and equipment interface problems.</li><li><strong>Control Loop Optimization:</strong> Analyze process behavior, evaluate control loop performance, and recommend adjustments to improve stability, accuracy, and responsiveness.</li><li><strong>Industrial Instrumentation:</strong> Coordinate with instrumentation specialists to review sensor signals, transmitters, actuators, control valves, and related field devices.</li><li><strong>System Testing and Commissioning Support:</strong> Prepare test procedures, review functional testing results, and provide remote technical assistance during factory acceptance testing (FAT), site acceptance testing (SAT), and commissioning activities.</li><li><strong>System Documentation:</strong> Maintain accurate technical documentation, including control narratives, functional design specifications, PLC program records, SCADA configurations, and system operating procedures.</li><li><strong>Control System Security:</strong> Support industrial control system cybersecurity measures, access control, configuration management, backup procedures, and secure remote access practices.</li><li><strong>Alarm Management:</strong> Review alarm configurations, identify nuisance alarms, assess alarm priorities, and recommend improvements to alarm handling and operator response.</li><li><strong>System Reliability:</strong> Analyze recurring faults, system performance data, and equipment behavior to identify reliability risks and recommend preventive measures.</li><li><strong>Change Management:</strong> Review and document control system modifications, software updates, configuration changes, and associated testing requirements.</li><li><strong>Vendor Coordination:</strong> Liaise with automation vendors, system integrators, equipment manufacturers, and engineering contractors to resolve technical issues and support project delivery.</li><li><strong>Technical Standards Compliance:</strong> Ensure control system designs and modifications align with approved engineering specifications, relevant industry standards, and organizational procedures.</li><li><strong>Project Engineering Support:</strong> Contribute to automation upgrades, system modernization, process improvement initiatives, and control system integration projects.</li><li><strong>Performance Reporting:</strong> Prepare technical reports covering system availability, faults, control performance, outstanding issues, and recommended improvements.</li><li><strong>Remote Technical Support:</strong> Provide troubleshooting guidance, review system data, coordinate engineering activities, and support on-site personnel through secure remote collaboration tools.</li></ul>Qualifications and Experience<ul><li>Bachelor's degree in Electrical Engineering, Control Systems Engineering, Instrumentation Engineering, Automation Engineering, Mechatronics, or a related technical discipline.</li><li>At least 5–8 years of relevant experience in industrial automation, control systems engineering, instrumentation, or process control.</li><li>Strong knowledge of PLC programming, SCADA platforms, DCS architectures, and industrial automation principles.</li><li>Practical experience with control system configuration, troubleshooting, diagnostics, testing, and performance optimization.</li><li>Familiarity with industrial communication protocols such as Modbus, OPC, PROFINET, PROFIBUS, EtherNet/IP, or similar technologies.</li><li>Understanding of control theory, process dynamics, PID control, instrumentation signals, and feedback control systems.</li><li>Experience reviewing electrical drawings, instrumentation diagrams, control narratives, functional specifications, and engineering documentation.</li><li>Knowledge of industrial control system cybersecurity principles, network segmentation, access management, and secure remote connectivity.</li><li>Familiarity with relevant industrial standards and frameworks, such as IEC 61131-3, IEC 62443, and applicable functional safety requirements.</li><li>Experience supporting system integration, factory acceptance testing, site acceptance testing, commissioning, and system upgrades.</li><li>Understanding of industrial equipment interfaces, sensors, actuators, control valves, and process instrumentation.</li><li>Strong analytical, diagnostic, and problem-solving skills.</li><li>Excellent written and verbal communication skills, including the ability to prepare technical reports and communicate complex engineering issues clearly.</li><li>Proficiency in engineering software, PLC development environments, SCADA configuration tools, and technical documentation systems.</li><li>Relevant certifications in industrial automation, PLC programming, SCADA, control systems, or industrial cybersecurity are advantageous.</li><li>Ability to work independently, manage multiple technical assignments, and coordinate effectively with on-site engineering and operations teams.</li></ul>Key Performance Indicators (KPIs)<p>Performance will be evaluated against agreed technical, operational, and project delivery objectives, including:</p><ul><li><strong>System Availability:</strong> Support high availability and reliable operation of assigned control systems.</li><li><strong>Fault Resolution:</strong> Diagnose and resolve control system issues within agreed service-level timelines.</li><li><strong>Control Performance:</strong> Improve control loop stability, process consistency, and automation effectiveness.</li><li><strong>Alarm Management:</strong> Reduce nuisance alarms and improve alarm configuration and response effectiveness.</li><li><strong>Project Delivery:</strong> Complete assigned engineering reviews, system modifications, and technical deliverables within agreed deadlines.</li><li><strong>Documentation Accuracy:</strong> Maintain complete, accurate, and up-to-date control system documentation.</li><li><strong>Testing Effectiveness:</strong> Support thorough testing and verification of control system changes before implementation.</li><li><strong>Cybersecurity Compliance:</strong> Maintain adherence to approved access controls, configuration management procedures, and industrial cybersecurity requirements.</li><li><strong>Change Management:</strong> Ensure system changes are appropriately assessed, documented, tested, and approved.</li><li><strong>Reliability Improvement:</strong> Identify recurring faults and contribute to measurable reductions in control system disruptions.</li><li><strong>Stakeholder Support:</strong> Provide timely and effective technical guidance to engineering teams, system integrators, and on-site personnel.</li><li><strong>Continuous Improvement:</strong> Recommend improvements to automation processes, control architectures, and system monitoring practices.</li></ul>What We Offer<ul><li>Competitive compensation based on qualifications and relevant experience.</li><li><strong>100% remote working arrangement</strong>, allowing you to perform your responsibilities from home.</li><li>Opportunities to contribute to industrial automation, control system modernization, and engineering improvement projects.</li><li>Professional development opportunities in PLC programming, SCADA, DCS, industrial cybersecurity, and advanced control technologies.</li><li>Exposure to complex control architectures, industrial communication systems, and process optimization initiatives.</li><li>A collaborative environment that values technical excellence, reliability, innovation, and continuous improvement.</li><li>Opportunities for career progression into control systems engineering leadership, automation architecture, industrial digitalization, or engineering management.</li><li>The opportunity to improve industrial system performance through technical expertise and remote engineering support.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<br>Responsibilities:<br><p><span>Engineer Responsibilities:</span></p><br><ul><li><p><span>Plan and supervise engineering works and site activities.</span></p><br><br><br></li><li><p><span>Ensure compliance with technical specifications, quality, and safety standards.</span></p><br><br><br></li><li><p><span>Monitor project progress, materials, and manpower.</span></p><br><br><br></li><li><p><span>Coordinate with contractors, suppliers, and project teams.</span></p><br><br><br></li><li><p><span>Prepare technical reports and progress updates.</span></p><br><br><br></li><li><p><span>Resolve site issues and ensure timely project completion.</span></p><br><br><br></li></ul><br>Qualifications:<br><p><span>Qualifications:</span></p><br><ul><li><p><span>Bachelor’s degree in Engineering or a related field.</span></p><br><br><br></li><li><p><span>Relevant experience in engineering works and project supervision.</span></p><br><br><br></li><li><p><span>Knowledge of technical drawings, specifications, and safety standards.</span></p><br><br><br></li><li><p><span>Strong problem-solving, communication, and coordination skills.</span></p><br><br><br></li><li><p><span>Proficient in MS Office and relevant engineering software.</span></p><br><br><br></li><li><p><span>Professional engineering license preferred, if applicable.</span></p><br><br><br></li></ul> </div>
Receive email alerts for Jobs For Faculty Of Engineering Graduates in UAE jobs
You can cancel your email alert at anytime