Cost Engineer Jobs in UAE

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Conduct and/or Participate in Company safety audits for Contractor and Sub Contractor Carry on risk assessment as directed by Company or Senior Safety Engineer.</p></li><li><p>Review the contract documents for each Construction Package in respect of Safety requirements and procedures and advise the Project manager of any deficiency.</p></li><li><p>Review and comment to the Project Manager, onsite safety organizations and key personnel CV's as submitted by the Contractor.</p></li><li><p>Review Safety Procedures as submitted by the Contractor and ensure implementation is in compliance with Contract requirements.</p></li><li><p>Review Inspection, Test, and Plans as submitted by the Contractors and ensure compliance with safety requirements.</p></li><li><p>Ensure all activities onsite are in compliance with safety procedures in respect of the format signed off by Contractor's Safety Officer.</p></li><li><p>Ensure Contractor’s safety staffs are adequate onsite and report to the Project manager in case of a shortfall.</p></li><li><p>Review Contractor's safety records, documents to ensure major construction equipment is maintained regularly.</p></li><li><p>Ensure Contractors labourers on site are following safety procedures and report to Project manager in case of deficiency.</p></li><li><p>Closely monitor site activities, on a daily basis, issuing non-compliance and submit reports to the Project Manager.</p></li><li><p>Participate in weekly meetings and monthly executive meetings.</p></li><li><p>Coordinating with Company senior safety Engineer to ensure that HSE policy is implemented by the Contractor.</p></li><li><p>Participate with PMC staff in reviewing and assessing of Close-out Report as submitted by Contractor.</p></li><li><p>Informs themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals and Procedures in place within Hill International, and ensures continued compliance with these requirements while employed by Hill.</p></li><li><p>Perform other duties as assigned by the line manager/supervisor.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in engineering or equivalent.</p></li><li><p>12 years’ experience in project health and safety on large New Build &amp; Residential Projects.</p></li><li><p>A minimum of 5 years' experience of working on Projects within PMC Organizations is mandatory.</p></li><li><p>ISO 14000 &amp; ISO 45001 Lead Auditor Certified.</p></li><li><p>NEBOSH IGC or similar recognized Level 3 HSE Qualification.</p></li><li><p>NVQ Level 5 Diploma (or higher) in Occupational Health &amp; Safety Management.</p></li><li><p>Abu Dhabi Occupational Safety and Health Practitioner Certificate (ADOSH/OSHAD-SF).</p></li><li><p>Excellent presentation skills with solid communication capabilities and practices, both oral and written.</p></li></ul><p></p></section>

Join BEC Arabia as a QA/QC - Electrical Engineer in Makkah and play a pivotal role in ensuring the highest standards of quality and compliance on iconic construction projects. Leverage your expertise to contribute to Saudi Vision 2030 while advancing your career with one of the Kingdom's premier engineering firms.<br><br>Job Description<br><br>About the Role<br><br>BEC Arabia is seeking a highly skilled QA/QC - Electrical Engineer to join our dynamic construction team in Makkah. This role is critical to ensuring that all electrical systems and installations meet the highest quality standards and comply with regulatory requirements. As part of our commitment to excellence, you will work on some of the most prestigious projects in the region, contributing to Saudi Vision 2030 and the Kingdom's ambitious infrastructure goals.<br><br>In this role, you will collaborate closely with project managers, site engineers, and other stakeholders to implement and monitor quality assurance and quality control processes for electrical works. Your day-to-day activities will include conducting inspections, reviewing technical documentation, and ensuring compliance with industry standards such as ISO 9001 and Saudi Building Code (SBC). This position offers a unique opportunity to grow within a leading organization while working on high-profile projects that shape the future of Saudi Arabia.<br><br>BEC Arabia provides a supportive environment where your expertise will directly impact project success. With a focus on professional development and innovation, this role is ideal for a detail-oriented professional eager to advance their career in a fast-paced, high-impact setting.<br><br>Key Responsibilities<br><br>Develop and implement QA/QC plans and procedures for electrical systems in compliance with project specifications and regulatory standards. Conduct regular inspections and audits of electrical installations to ensure adherence to quality standards and safety protocols. Review and approve electrical design documents, material submittals, and shop drawings for compliance with project requirements. Monitor construction activities to identify and resolve quality issues in real-time, ensuring minimal impact on project timelines. Coordinate with project managers, consultants, and contractors to address quality concerns and implement corrective actions. Prepare detailed QA/QC reports, including non-conformance reports (NCRs), and track their resolution. Ensure compliance with ISO 9001, ISO 14001, and ISO 45001 standards, as well as the Saudi Building Code (SBC). Verify that all electrical testing and commissioning activities are performed according to approved procedures and standards. Maintain accurate documentation of quality control activities, including inspection records, test results, and certifications. Support the training and development of site teams on QA/QC best practices and regulatory compliance. Collaborate with the procurement team to ensure that all electrical materials meet quality and project specifications.<br><br>Required Qualifications<br><br>Bachelor of Science in Electrical Engineering or a related discipline from an accredited institution. Minimum of 5 years of experience in QA/QC roles within the construction or engineering industry, with a focus on electrical systems. Saudi Council of Engineers (SCE) registration is mandatory. Proven knowledge of ISO 9001, ISO 14001, and ISO 45001 standards. Familiarity with Saudi Building Code (SBC) and other relevant regulations. Proficiency in tools such as Auto CAD, ETAP, and Primavera P6. Strong understanding of electrical testing and commissioning processes. Excellent communication and documentation skills in English.<br><br>Preferred Qualifications<br><br>Certified Quality Engineer (CQE) or equivalent certification. Experience with LEED, Estidama, or Mostadam green building standards. Advanced knowledge of BIM (Building Information Modeling) tools. Previous experience working on Saudi Vision 2030 giga-projects. Familiarity with ARAMCO or SABIC standards.<br><br>Working Conditions<br><br>Primarily based on construction sites in Makkah, with occasional office-based tasks. Exposure to outdoor conditions, including high temperatures typical of Saudi Arabia. Use of Personal Protective Equipment (PPE) is mandatory on-site. Standard workweek with potential for extended hours to meet project deadlines. Limited regional travel may be required for project coordination.<br><br>What We Offer<br><br>Competitive salary and comprehensive benefits package. Opportunities for career growth and professional development. Access to training programs and certifications in quality management and engineering. Exposure to landmark projects aligned with Saudi Vision 2030. A safety-first culture with a commitment to employee well-being. A diverse and inclusive work environment with a multinational team. The chance to work with cutting-edge technologies and innovative methodologies.<br><br>Key Responsibilities<br><br>Develop and implement QA/QC plans and procedures for electrical systems in compliance with project specifications and regulatory standards. Conduct regular inspections and audits of electrical installations to ensure adherence to quality standards and safety protocols. Review and approve electrical design documents, material submittals, and shop drawings for compliance with project requirements. Monitor construction activities to identify and resolve quality issues in real-time, ensuring minimal impact on project timelines. Coordinate with project managers, consultants, and contractors to address quality concerns and implement corrective actions. Prepare detailed QA/QC reports, including non-conformance reports (NCRs), and track their resolution. Ensure compliance with ISO 9001, ISO 14001, and ISO 45001 standards, as well as the Saudi Building Code (SBC). Verify that all electrical testing and commissioning activities are performed according to approved procedures and standards. Maintain accurate documentation of quality control activities, including inspection records, test results, and certifications. Support the training and development of site teams on QA/QC best practices and regulatory compliance. Collaborate with the procurement team to ensure that all electrical materials meet quality and project specifications.<br><br>Required Qualifications<br><br>Bachelor of Science in Electrical Engineering or a related discipline from an accredited institution. Minimum of 5 years of experience in QA/QC roles within the construction or engineering industry, with a focus on electrical systems. Saudi Council of Engineers (SCE) registration is mandatory. Proven knowledge of ISO 9001, ISO 14001, and ISO 45001 standards. Familiarity with Saudi Building Code (SBC) and other relevant regulations. Proficiency in tools such as Auto CAD, ETAP, and Primavera P6. Strong understanding of electrical testing and commissioning processes. Excellent communication and documentation skills in English.<br><br>Preferred Qualifications<br><br>Certified Quality Engineer (CQE) or equivalent certification. Experience with LEED, Estidama, or Mostadam green building standards. Advanced knowledge of BIM (Building Information Modeling) tools. Previous experience working on Saudi Vision 2030 giga-projects. Familiarity with ARAMCO or SABIC standards.<br><br>Working Conditions<br><br>Primarily based on construction sites in Makkah, with occasional office-based tasks. Exposure to outdoor conditions, including high temperatures typical of Saudi Arabia. Use of Personal Protective Equipment (PPE) is mandatory on-site. Standard workweek with potential for extended hours to meet project deadlines. Limited regional travel may be required for project coordination.<br><br>What We Offer<br><br>Competitive salary and comprehensive benefits package. Opportunities for career growth and professional development. Access to training programs and certifications in quality management and engineering. Exposure to landmark projects aligned with Saudi Vision 2030. A safety-first culture with a commitment to employee well-being. A diverse and inclusive work environment with a multinational team. The chance to work with cutting-edge technologies and innovative methodologies.<br><br>Required Skills<br><br>Auto CAD ETAP Primavera P6 ISO 9001 Electrical Testing Saudi Building Code (SBC)<br><br>Preferred Skills<br><br>LEED Estidama Mostadam BIM Tools Certified Quality Engineer (CQE) ARAMCO Standards<br><br>Share this job<br><br>Linked In Twitter Email

<p>We are seeking an experienced Industrial / Operations Engineer to oversee daily industrial operations, workforce management, and productivity monitoring within a large industrial plant environment. The ideal candidate should have hands-on experience in plant operations, manpower supervision, reporting, and coordination with client teams. Key Responsibilities: - Supervise and manage daily industrial operations and workforce activities. - Monitor manpower performance, productivity, attendance, and shift allocation. - Ensure smooth execution of operational activities as per client requirements. - Coordinate with operation and maintenance teams for daily activities. - Prepare daily operational reports, manpower reports, and productivity tracking reports. - Ensure compliance with safety procedures, permit systems, and site regulations. - Identify opportunities for operational improvements and resource optimization. - Handle operational challenges and ensure timely resolution. - Support workforce planning and improve overall efficiency.</p><p>- Bachelor’s Degree in Industrial Engineering / Mechanical Engineering or related field. - Minimum 3–4 years of experience in industrial operations, plant supervision, or workforce management. - Experience working in industrial plants or manufacturing environments in UAE is preferred. - Strong understanding of plant operations and manpower supervision. - Experience in productivity monitoring and operational reporting. - Proficiency in MS Office, especially Excel for tracking and reporting. - Strong communication, leadership, and problem-solving skills. - Ability to work in a plant environment and manage a large workforce. Preferred Candidate Background: - Candidates with experience in industrial services, maintenance contractors, manufacturing companies, or large-scale industrial operations are preferred.</p>

Company Description ASSET Technology Group, founded in 1991, is a leading provider of innovative software solutions in Document Management, Process Automation, and Content Management across the Middle East and international markets. The company serves more than 600 clients and operates a dedicated software services division that delivers development, support, and quality assurance services both offshore and on-site. With a team of over 600 engineers, ASSET has a strong track record of successful projects and high customer satisfaction, particularly in the Middle East. Since 2004, the company has expanded into the telecommunications sector, offering Value-Added Services and tailored solutions for mobile operators in the MENA region. ASSET’s growth is supported by highly skilled technical teams and partnerships with leading technology companies such as Opentext, Microsoft, Liferay, and Fiorano.<br>Job Description<br>Software Engineer (2–5 Years' Experience) Location: United Arab Emirates (On-site) Employment Type: Full-time Eligibility: Candidates must hold a valid UAE residency visa<br>About the Role<br>We are looking for a motivated, customer-facing Software Engineer with 2–5 years of experience to join our team for a hands-on, on-site role. The ideal candidate is technically solid, comfortable in front of clients, and communicates clearly and professionally. Key Responsibilities Deploy, install and configure our applications on Windows environments at client Set up and manage Apache Tomcat application servers, including deployment of WAR files, configuration, tuning, and troubleshooting Deliver product demos and presentations to client Provide on-site technical support Act as the technical point of contact for clients during deployment and post-go-live support Train client teams and end users on system usage and best practices Escalate and document issues clearly, and coordinate with the development team on fixes<br>Requirements<br>Bachelor's degree in Computer Science, Software Engineering, or a related field2–5 years of professional experience in development, deployment, or technical support roles Practical experience deploying and administering applications on Apache Tomcat Fluency in Arabic is required ,candidates must be able to communicate effectively with Arabic-speaking clients. Good understanding of relational databases (SQL), REST APIs, and networking basics Proven experience in a client-facing capacity (support, deployments, demos, or training) Excellent communication and presentation skills in Arabic/English Strong troubleshooting and problem-solving skills Must currently reside in the UAE with a valid residency visa Nice to Have Experience with on-premise enterprise software rollouts and system integration Familiarity with Windows Server administration and IIS/Tomcat coexistence setups A valid UAE driving license is a plus.

Company Description ASSET Technology Group, founded in 1991, is a leading provider of innovative software solutions in Document Management, Process Automation, and Content Management across the Middle East and international markets. The company serves more than 600 clients and operates a dedicated software services division that delivers development, support, and quality assurance services both offshore and on-site. With a team of over 600 engineers, ASSET has a strong track record of successful projects and high customer satisfaction, particularly in the Middle East. Since 2004, the company has expanded into the telecommunications sector, offering Value-Added Services and tailored solutions for mobile operators in the MENA region. ASSET’s growth is supported by highly skilled technical teams and partnerships with leading technology companies such as Opentext, Microsoft, Liferay, and Fiorano.<br>Job Description<br>Software Engineer (2–5 Years' Experience) Location: United Arab Emirates (On-site) Employment Type: Full-time Eligibility: Candidates must hold a valid UAE residency visa<br>About the Role<br>We are looking for a motivated, customer-facing Software Engineer with 2–5 years of experience to join our team for a hands-on, on-site role. The ideal candidate is technically solid, comfortable in front of clients, and communicates clearly and professionally. Key Responsibilities Deploy, install and configure our applications on Windows environments at client Set up and manage Apache Tomcat application servers, including deployment of WAR files, configuration, tuning, and troubleshooting Deliver product demos and presentations to client Provide on-site technical support Act as the technical point of contact for clients during deployment and post-go-live support Train client teams and end users on system usage and best practices Escalate and document issues clearly, and coordinate with the development team on fixes<br>Requirements<br>Bachelor's degree in Computer Science, Software Engineering, or a related field2–5 years of professional experience in development, deployment, or technical support roles Practical experience deploying and administering applications on Apache Tomcat Fluency in Arabic is required ,candidates must be able to communicate effectively with Arabic-speaking clients. Good understanding of relational databases (SQL), REST APIs, and networking basics Proven experience in a client-facing capacity (support, deployments, demos, or training) Excellent communication and presentation skills in Arabic/English Strong troubleshooting and problem-solving skills Must currently reside in the UAE with a valid residency visa Nice to Have Experience with on-premise enterprise software rollouts and system integration Familiarity with Windows Server administration and IIS/Tomcat coexistence setups A valid UAE driving license is a plus.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The QA/QC Engineer is responsible for implementing and maintaining the Quality Management System (QMS) on construction projects, ensuring that all materials, workmanship, and construction activities comply with project specifications, contract requirements, applicable codes, and international quality standards.</p><p><strong>&nbsp;</strong></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Implement the Project Quality Plan (PQP), Inspection &amp; Test Plans (ITPs), and quality procedures.</p></li><li><p>Conduct inspections of civil, architectural, structural, and finishing works to ensure compliance with project specifications.</p></li><li><p>Coordinate with consultants, clients, subcontractors, and site engineers for inspections and approvals.</p></li><li><p>Prepare and submit Inspection Requests (IRs), Material Inspection Requests (MIRs), and quality documentation.</p></li><li><p>Monitor construction activities to ensure compliance with approved drawings, method statements, and technical specifications.</p></li><li><p>Identify non-conforming works (NCRs), investigate root causes, and ensure corrective and preventive actions are implemented.</p></li><li><p>Review material submittals, shop drawings, and method statements from a quality perspective.</p></li><li><p>Ensure all materials delivered to site meet project specifications and approved standards.</p></li><li><p>Maintain quality records, inspection reports, calibration certificates, test results, and quality logs.</p></li><li><p>Coordinate laboratory testing of construction materials such as concrete, soil, steel, and asphalt.</p></li><li><p>Participate in internal and external quality audits.</p></li><li><p>Ensure compliance with ISO 9001 Quality Management System requirements.</p></li><li><p>Monitor subcontractors' quality performance and ensure compliance with contractual obligations.</p></li><li><p>Attend project meetings related to quality matters.</p></li><li><p>Prepare weekly and monthly quality reports for project management.</p></li><li><p>Assist during project handover and close-out by preparing quality dossiers and as-built documentation.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>.</p><p></p></section>

Senior Mechanical Procurement Engineer – Technical | Dubai, UAEAre you a technically strong Mechanical Engineer with experience reviewing specifications, evaluating vendors, and supporting procurement for complex building systems?<br>ALEMCO is looking for technically driven engineers to join our Post-Contract Technical Procurement team, supporting delivery of technically compliant procurement packages for large-scale construction projects.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEMCO provides integrated MEP and facilities services that power some of the region’s most ambitious developments. From electrical systems to long-term maintenance, we focus on technical reliability and sustainable performance - supported by an inclusive and skilled team with a passion for engineering excellence.<br>Why Join Us? As a Senior Electrical Engineer, you will provide technical engineering support throughout the post-contract procurement process, working closely with engineering, commissioning, procurement, and commercial teams. You will play a key role in ensuring MEP systems and equipment comply with project specifications, design intent, and performance standards.<br>At ALEC, we’re about more than just building iconic structures - we’re about building exceptional careers. As a trusted partner to some of the region’s most ambitious projects, we value innovation, operational excellence, and our people.<br>Your Role Reporting to the Procurement Package Manager / Head of Procurement, you will provide technical engineering support throughout the post-contract procurement process, ensuring Electrical systems comply with project drawings, specifications, BOQs, and design intent.<br>Key Responsibilities Review mechanical specifications, drawings, BOQs, and technical requirements. Support preparation of RFQs and technically evaluate vendor submissions. Prepare and review technical submittals, compliance matrices, and technical clarifications. Coordinate with Engineering, Procurement, Commissioning, Commercial teams, Consultants, and Suppliers. Review MEP system interfaces and commissioning requirements during procurement. Support consultant approvals and ensure technical compliance throughout the procurement process. Monitor procurement progress and maintain procurement trackers and technical documentation. Ensure procurement packages comply with project specifications, engineering standards, and governance requirements.<br>What We’re Looking For Degree qualified in Mechanical Engineering Minimum 8 years’ within MEP engineering or procurement environments. Sound understanding of specifications, drawings, schedules. Familiarity with technical procurement trackers, gap analysis and compliance matrices.<br>Highly Preferred Experience within the MEP contracting or engineering sector, ideally within technically driven project environments. Exposure to post-contract procurement, technical submittals, or engineering coordination of MEP systems and equipment. Experience working on commercial, infrastructure, or mixed-use developments. Middle East project experience<br>What We Offer The chance to contribute to some of the UAE's most iconic projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression.<br>Ready to plan the path to project success? If you understand MEP systems beyond drawings and can ensure technical compliance from design to handover, we want to hear from you.<br>Apply today and be part of something exceptional.<br>Please note we encourage you to apply as soon as possible, as this advert may close once we’ve found the right candidate. Although we can’t respond to every application, we want to thank you for taking the time to apply and for considering a future with us.

Senior Mechanical Procurement Engineer – Technical | Dubai, UAEAre you a technically strong Mechanical Engineer with experience reviewing specifications, evaluating vendors, and supporting procurement for complex building systems?<br>ALEMCO is looking for technically driven engineers to join our Post-Contract Technical Procurement team, supporting delivery of technically compliant procurement packages for large-scale construction projects.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEMCO provides integrated MEP and facilities services that power some of the region’s most ambitious developments. From electrical systems to long-term maintenance, we focus on technical reliability and sustainable performance - supported by an inclusive and skilled team with a passion for engineering excellence.<br>Why Join Us? As a Senior Electrical Engineer, you will provide technical engineering support throughout the post-contract procurement process, working closely with engineering, commissioning, procurement, and commercial teams. You will play a key role in ensuring MEP systems and equipment comply with project specifications, design intent, and performance standards.<br>At ALEC, we’re about more than just building iconic structures - we’re about building exceptional careers. As a trusted partner to some of the region’s most ambitious projects, we value innovation, operational excellence, and our people.<br>Your Role Reporting to the Procurement Package Manager / Head of Procurement, you will provide technical engineering support throughout the post-contract procurement process, ensuring Electrical systems comply with project drawings, specifications, BOQs, and design intent.<br>Key Responsibilities Review mechanical specifications, drawings, BOQs, and technical requirements. Support preparation of RFQs and technically evaluate vendor submissions. Prepare and review technical submittals, compliance matrices, and technical clarifications. Coordinate with Engineering, Procurement, Commissioning, Commercial teams, Consultants, and Suppliers. Review MEP system interfaces and commissioning requirements during procurement. Support consultant approvals and ensure technical compliance throughout the procurement process. Monitor procurement progress and maintain procurement trackers and technical documentation. Ensure procurement packages comply with project specifications, engineering standards, and governance requirements.<br>What We’re Looking For Degree qualified in Mechanical Engineering Minimum 8 years’ within MEP engineering or procurement environments. Sound understanding of specifications, drawings, schedules. Familiarity with technical procurement trackers, gap analysis and compliance matrices.<br>Highly Preferred Experience within the MEP contracting or engineering sector, ideally within technically driven project environments. Exposure to post-contract procurement, technical submittals, or engineering coordination of MEP systems and equipment. Experience working on commercial, infrastructure, or mixed-use developments. Middle East project experience<br>What We Offer The chance to contribute to some of the UAE's most iconic projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression.<br>Ready to plan the path to project success? If you understand MEP systems beyond drawings and can ensure technical compliance from design to handover, we want to hear from you.<br>Apply today and be part of something exceptional.<br>Please note we encourage you to apply as soon as possible, as this advert may close once we’ve found the right candidate. Although we can’t respond to every application, we want to thank you for taking the time to apply and for considering a future with us.

<p>Purpose:</p><ul><li><p>Responsible for the planning and</p></li></ul><p>preparation of detailed construction</p><p>programmes.</p><p>Tender Stage:</p><ul><li><p>Support the Estimation Department in</p></li></ul><p>preparing tender programmes and</p><p>technical submissions.</p><p>Execution Stage:</p><ul><li><p>Assist the Project Manager in formulating</p></li></ul><p>a viable project execution plan by</p><p>reviewing project drawings and BOQ.</p><ul><li><p>Define project activities, durations, and</p></li></ul><p>logical relationships to establish the</p><p>schedule.</p><ul><li><p>Monitor progress and identify delays or</p></li></ul><p>slippages that may impact contractual</p><p>milestones.</p><ul><li><p>Coordinate with consultants and</p></li></ul><p>subcontractors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Key Outputs: The Planning Engineer is responsible for:</p></li><li><p>Identify labour, plant, and transportation requirements in line with project schedule.</p></li><li><p>Review project documents, including drawings, specifications, BOQ, and contract conditions.</p></li><li><p>Prepare construction schedules to align with project completion targets.</p></li><li><p>Maintain the approved baseline programme.</p></li><li><p>Conduct daily site visits to assess progress.</p></li><li><p>Update the schedule daily based on current site conditions.</p></li><li><p>Prepare and issue daily progress reports to the client.</p></li><li><p>Prepare and issue weekly and monthly progress reports.</p></li><li><p>Generate S-Curves from the approved programme and maintain as-built versions.</p></li><li><p>Participate in weekly progress review meetings with the Project Manager to identify and address delays.</p></li><li><p>Attend client progress review meetings.</p></li><li><p>Coordinate closely with the site execution team.</p></li><li><p>Monitor and coordinate all subcontractor activities.</p></li><li><p>Liaise with the client’s planning department during project execution.</p></li><li><p>Track and report subcontractor progress daily.</p></li><li><p>Maintain and update tender programmes and technical submissions.</p></li><li><p>Manage time claims and maintain related documentation.</p></li><li><p>Perform other related duties as assigned by the reporting manager.<br><br></p><ul><li><p>Qualifications:</p></li><li><p>Bachelor’s degree in engineering (Civil)</p></li><li><p>Postgraduate Diploma in Project Management Skills/Knowledge:</p></li><li><p>Proficient in interpreting drawings, specifications, and BOQs</p></li><li><p>Skilled in planning software such as Primavera P3, P3.1, P6, and MS Project (2003 & 2007)</p></li><li><p>In-depth understanding of Critical Path Method (CPM) in construction management</p></li><li><p>Ability to manually create network diagrams and calculate Early Start, Early Finish, Late Start, Late Finish, and Total Float</p></li><li><p>Knowledge of Precedence Diagramming Method (PDM) and Arrow Diagramming Method (ADM)</p></li><li><p>Proficient in MS Office tools such as Excel and Word</p></li><li><p>Familiar with FIDIC Conditions of Contract (Red Book – 1999 edition) and Oman’s Standard Conditions of Contract</p></li><li><p>Willingness to adopt international best practices in Earned Value Management, involving collaboration across departments</p></li><li><p>Good awareness of company Quality and HSE policies and procedures</p></li></ul></li></ul>

Job Description<br><br>Who we are<br><br>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property & buildings, and transportation sectors.<br><br>About The Role<br><br>We are seeking an experienced and driven Lead Electrical Engineer to join our Global Data Centre Design Team (Mission Critical), based in our UAE offices. This is a high-profile leadership role for a technically accomplished engineer with a proven track record in the design and delivery of complex data centre projects.<br><br>You will have the opportunity to lead the electrical engineering design on some of the most advanced AI and hyperscale data centre projects worldwide. These projects range from deploying and refining standardised, high-performance designs for global clients to delivering fully bespoke, cutting-edge facilities that set new benchmarks for innovation, resilience, and sustainability.<br><br>You will play a central role in influencing future data centre design approaches, working closely with clients, multidisciplinary teams, and industry experts to deliver efficient, sustainable, and commercially viable engineering solutions that meet the rapidly evolving demands of AI-driven infrastructure.<br><br>Key Responsibilities<br><br> Lead the electrical design for mission critical facilities, covering all aspects including medium and low voltage power distribution, UPS systems, standby generation, lighting, earthing, and lightning protection. Drive technical excellence by producing high-quality designs, specifications, reports, and calculations in accordance with client requirements, local regulations, and international standards. Conduct load assessments, redundancy strategy planning, fault/discrimination studies, and resilience planning for high-availability facilities. Coordinate with mechanical, structural, ICT, security, and other disciplines to ensure integrated, clash-free, and optimised designs. Provide technical leadership and mentoring, supporting the growth of less experienced engineers and fostering a culture of continuous improvement. Oversee project budgets, deliverables, and programmes, ensuring compliance with contractual and quality requirements. Maintain direct client engagement, presenting solutions, managing expectations, and offering proactive technical input during all project phases. Contribute to the development, adaptation, and improvement of client standard reference designs, as well as the design of bespoke facilities. Champion innovation, integrating energy efficiency, sustainability, and emerging technologies into design strategies. <br><br>Experience & Qualifications<br><br> Bachelor’s degree in Electrical Engineering (Master’s degree or Chartered Engineer status preferred). Minimum 10 years’ relevant experience, with at least 3 years in mission critical and/or data centre projects. Proven expertise in MV/LV distribution systems, UPS and generator systems, and advanced redundancy schemes. Strong understanding of cooling integration, ICT systems, and commissioning processes specific to high-availability environments. Familiarity with hyperscale and AI data centre design considerations is highly desirable. Proficiency in ETAP, Amtech, Auto CAD, Revit, and other relevant design tools. Track record of producing detailed designs including schematic diagrams, fault and discrimination studies, technical reports, and specifications. Strong leadership, problem-solving, and stakeholder management skills. Excellent communication skills with the ability to lead discussions, influence decision-making, and collaborate across multiple disciplines. <br><br>Why Join Us?<br><br> Work on globally significant projects, influencing the next generation of AI and hyperscale data centre design. Be part of a globally recognised, fast-growing mission critical team delivering projects that blend technical excellence, sustainability, and commercial success. Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions. Join a team that values knowledge-sharing, mentorship, and professional excellence. Be part of a workplace that combines collaboration, flexibility, and connection. Join us in the office three days per week to contribute, connect and excel in our vibrant environment. <br><br>Our Pledge to You<br><br>At GHD, we don’t just believe in the power of commitment, we live and breathe it every day.<br><br>That’s why we pledge to empower our people to make a positive impact. Combining our deep technical expertise with the capabilities of our clients and partners, we respond to some of the most complex challenges facing our planet today.<br><br>See where your commitment could take you.<br><br>That’s the #Power OfCommitment

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Overview</strong></p><p>The <strong>Tower Crane Plant Engineer</strong> manages the complete lifecycle, mechanical reliability, and structural integrity of heavy lifting equipment across construction sites. This role bridges technical engineering with field operations to ensure safe, efficient, and legally compliant crane deployments. </p><p><strong>Key Responsibilities</strong></p><p><strong>1. Site Planning &amp; Deployment</strong></p><ul><li><p>Conduct comprehensive <strong>site surveys</strong> to evaluate optimal tower crane positioning.</p></li><li><p>Factor in <strong>building layouts, access routes, and structural loading impacts</strong> during planning.</p></li><li><p>Coordinate the <strong>marking of crane bases and placement of structural ties</strong> per engineering drawings.</p></li><li><p>Formulate detailed <strong>Method Statements and Risk Assessments (MSRA)</strong> for all crane operations.</p></li></ul><p><strong>2. Lifting &amp; Logistics Engineering</strong></p><ul><li><p>Develop engineered <strong>lifting plans</strong>, defining load charts, rigging designs, and boundary constraints.</p></li><li><p>Analyze <strong>outrigger loadings, foundation capacities, and crane mat designs</strong>.</p></li><li><p>Program and establish restricted movement zones and <strong>anti-collision safety systems</strong>. </p></li></ul><p><strong>3. Erection, Dismantling &amp; Commissioning</strong></p><ul><li><p>Supervise the safe <strong>erection, climbing, and dismantling</strong> phases of various tower crane models.</p></li><li><p>Validate <strong>structural stability</strong> and alignment during sequential assembly.</p></li><li><p>Execute comprehensive <strong>load testing and scaling</strong> protocols before signing off on deployment. </p></li></ul><p><strong>4. Inspections &amp; Safety Compliance</strong></p><ul><li><p>Perform mandatory statutory inspections adhering to local authority approvals and international frameworks like <strong>LOLER and PUWER</strong>.</p></li><li><p>Enforce strict <strong>HSE practices</strong> and the industry standard <strong>3-3-3 safety rule</strong>.</p></li><li><p>Maintain accurate engineering logs, statutory inspection files, and service histories. </p></li></ul><p><strong>5. Maintenance &amp; Technical Troubleshooting</strong></p><ul><li><p>Manage <strong>preventive and corrective maintenance</strong> schedules to reduce operational downtime.</p></li><li><p>Diagnose and resolve complex mechanical, hydraulic, and <strong>electrical control system (PLC)</strong> faults.</p></li><li><p>Oversee workshop staff, control spare parts inventories, and handle technical coordination with original manufacturers. </p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Education</strong>: Bachelor’s Degree in <strong>Mechanical Engineering, Electrical Engineering</strong>, or a closely related discipline.</p></li><li><p><strong>Experience</strong>: Minimum 5+ years of dedicated engineering experience managing high-rise tower cranes (e.g., Liebherr, Wolff, Wilbert).</p></li><li><p><strong>Technical Mastery</strong>: Deep understanding of <strong>load charts, rigging practices, electrical schematics, and PLC drive systems</strong>.</p></li><li><p><strong>Physical Capability</strong>: Physically fit to work at extreme heights and manage technical assessments in diverse outdoor environments.</p></li><li><p><strong>Soft Skills</strong>: Clear cross-functional leadership skills to manage site technicians and align with project managers. </p></li></ul><p></p></section>

Job Overview<br><br> JOB DESCRIPTION <br><br>The Principal Welding Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Welding-related problems and will work independently with minimal guidance. The Principal Welding Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Welding. As such, they must have in-depth expertise in Welding as well as broad knowledge of the Welding discipline within the Engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities<br><br>Guide the Welding Engineering discipline and Metallurgical consultative welding services to the operations group and PMT for onshore & offshore projects Responsible for various deliverables from the Welding Engineering group, listed (but not limited to) below:Project Welding Qualification Execution Plan that defines the full scope of Weld Procedures required, schedule of qualification, and quantity of welding consumables and materials required for qualification Ensure that proper priorities relevant to project schedules are established and review progress Review and approval of all Project Weld Procedures through direct and indirect communications with the customer and Certifying Authority Appropriate selection of electrodes based on their physical, chemical, and corrosion properties as well as considering their weldability and economics Review project schedules, material control reports, and welding consumable estimates to determine changes to the welding execution plan Manage welding school facility for the training and development of the workforce to improve the welding methodology and good workmanship practices Assist in the support and development of automatic welding systems Review and estimates for bids Complete Welding consumable project-specific requirements estimation, requisitioning, and monitoring Forecast of DOE consumables Complete Readiness review for important offshore campaigns Work with Fabrication Management, Yard Welding Dept, Marine Group, and AWS group on future R&D developments and the latest technology available related to welding of Ferrous and Non-Ferrous materials Maintain contact with internal and external technical groups such as Global Welding Group, TWI, DNV, EWI, Welding Equipment and Consumable manufacturers, and similar organizations for updates on the latest technology Assist in resolving Metallurgical, Welding, and Quality-related problems, by investigating causes of failures and prescribing fit-for-purpose Initiate 'Fit for Purpose' evaluations of nonconforming work Evaluate the performance of Welding Engineers reporting directly to them and make decisions regarding their training needs, changes in classification, and compensation Visit the vendor’s facility for technical evaluation Ensure input for bidding is given through the Welding Engineering Group Monitor projects during the execution stage<br><br>Liaise with Operations Manager (Fabrication / Marine), Discipline Managers, PMT, Customers, Operations /Field Engineers, QC/NDT Engineers, Engineering Group, Certifying Authority, Consulting firms like TWI, DNV, etc., Global Welding Technology Group, Bidding group, and Project Management<br><br>Qualifications<br><br>Essential Qualifications and Education<br><br>MS/M Tech/ME in Welding BS /BE/B Tech in Welding/Metallurgy/Mechanical Engineering8+ years directly related to Welding, Metallurgy and Materials, subsea pipelines C Eng./Sen Mem Weld I/Member of professional body preferred Welding Inspection Qualification preferred <br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Overview<br><br> JOB DESCRIPTION <br><br>The Principal Welding Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Welding-related problems and will work independently with minimal guidance. The Principal Welding Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Welding. As such, they must have in-depth expertise in Welding as well as broad knowledge of the Welding discipline within the Engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities<br><br>Guide the Welding Engineering discipline and Metallurgical consultative welding services to the operations group and PMT for onshore & offshore projects Responsible for various deliverables from the Welding Engineering group, listed (but not limited to) below:Project Welding Qualification Execution Plan that defines the full scope of Weld Procedures required, schedule of qualification, and quantity of welding consumables and materials required for qualification Ensure that proper priorities relevant to project schedules are established and review progress Review and approval of all Project Weld Procedures through direct and indirect communications with the customer and Certifying Authority Appropriate selection of electrodes based on their physical, chemical, and corrosion properties as well as considering their weldability and economics Review project schedules, material control reports, and welding consumable estimates to determine changes to the welding execution plan Manage welding school facility for the training and development of the workforce to improve the welding methodology and good workmanship practices Assist in the support and development of automatic welding systems Review and estimates for bids Complete Welding consumable project-specific requirements estimation, requisitioning, and monitoring Forecast of DOE consumables Complete Readiness review for important offshore campaigns Work with Fabrication Management, Yard Welding Dept, Marine Group, and AWS group on future R&D developments and the latest technology available related to welding of Ferrous and Non-Ferrous materials Maintain contact with internal and external technical groups such as Global Welding Group, TWI, DNV, EWI, Welding Equipment and Consumable manufacturers, and similar organizations for updates on the latest technology Assist in resolving Metallurgical, Welding, and Quality-related problems, by investigating causes of failures and prescribing fit-for-purpose Initiate 'Fit for Purpose' evaluations of nonconforming work Evaluate the performance of Welding Engineers reporting directly to them and make decisions regarding their training needs, changes in classification, and compensation Visit the vendor’s facility for technical evaluation Ensure input for bidding is given through the Welding Engineering Group Monitor projects during the execution stage<br><br>Liaise with Operations Manager (Fabrication / Marine), Discipline Managers, PMT, Customers, Operations /Field Engineers, QC/NDT Engineers, Engineering Group, Certifying Authority, Consulting firms like TWI, DNV, etc., Global Welding Technology Group, Bidding group, and Project Management<br><br>Qualifications<br><br>Essential Qualifications and Education<br><br>MS/M Tech/ME in Welding BS /BE/B Tech in Welding/Metallurgy/Mechanical Engineering8+ years directly related to Welding, Metallurgy and Materials, subsea pipelines C Eng./Sen Mem Weld I/Member of professional body preferred Welding Inspection Qualification preferred <br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Turner &amp; Townsend is a global professional services company with over 22,000 people in more than 60 countries.<br> Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success.<br> Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions.<br> We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner &amp; Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world.</p><br><p>Please visit our website: www.turnerandtownsend.com</p><br><br>Job Description<br><p>The PMC HSE Officer is responsible for implementing and monitoring all Health, Safety, and Environmental (HSE) requirements at the project site level. The role ensures compliance with the company HSEQ Management System, ADOSH-SF requirements, and international safety best practices, while coordinating closely with the PMC HSEQ Manager, project teams, EPC contractors, and supervision consultants</p><br><p><strong>Key Responsibilities</strong></p><br><p><strong>1. Implementation of HSE Management Systems</strong></p><br><ul><li>Support the development and implementation of the Project HSE Management System, including monitoring systems and incident reporting procedures.</li><li>Ensure project-level compliance with HSEQ Plans, procedures, and permit-to-work (PTW) systems as per client and ADOSH-SF requirements.</li></ul><p><strong>2. Site-Based HSE Monitoring &amp; Assurance</strong></p><br><ul><li>Carry out assurance and self-verification daily site supervision, inspections, and monitoring of all construction activities</li><li>Prepare HSEQ summary reports and contribute to weekly and monthly HSEQ reporting cycles.</li><li>Support enforcement of client T‑12 Essential Rules and ensure consistent site compliance.</li><li>Carry out assurance and self-verification activities against contract HSE requirements</li></ul><p><strong>3. Documentation Review &amp; Technical HSE Control</strong></p><br><ul><li>Review contractor HSEQ plans, method statements, risk assessments, and all HSE documents to ensure alignment with company standards.</li><li>Support the development and maintenance of the formal project risk assessment process</li><li>Track contractor and consultant HSEQ documentation, certifications, and compliance records to ensure compliance.</li></ul><p><strong>4. Incident Reporting &amp; Investigation Support</strong></p><br><ul><li>Participate in incident/near-miss investigations, support root-cause analysis, and ensure timely escalation to PMC and teams</li><li>Ensure accurate incident logs are maintained, and corrective and preventive actions are implemented.</li></ul><p><strong>5. Coordination with PMC, Client &amp; Contractors</strong></p><br><ul><li>Coordinate closely with Client Transmission representatives, PMC HSEQ Manager, supervision consultants, and EPC contractors to ensure consistent HSEQ execution</li><li>Provide real-time HSEQ inputs and updates to PMC and teams.</li><li>Provide specialist HSE advice as required for high‑risk activities.</li></ul><p><strong>6. HSE Training, Toolbox Talks &amp; Awareness</strong></p><br><ul><li>Support or lead HSE meetings, toolbox talks, inductions, and awareness campaigns in collaboration with consultants/contractors.</li><li>Assist in developing and delivering effective HSE training modules for project personnel as required.</li></ul><p><strong>7. Emergency Preparedness &amp; Response</strong></p><br><ul><li>Participate in emergency preparedness drills, evaluate outcomes, and provide improvement recommendations</li><li>Ensure emergency response equipment, procedures, and communication protocols are in place at site level as per client and regulatory requirements.</li></ul><p><strong>8. HSE Performance Monitoring &amp; Reporting</strong></p><br><ul><li>Maintain project HSEQ performance statistics and ensure they are communicated internally.</li><li>Update HSEQ action trackers and ensure follow‑through on outstanding items.</li></ul><p><strong>9. Regulatory Compliance</strong></p><br><ul><li>Ensure compliance by all parties with UAE legislation, client regulations, and project-specific HSEQ requirements.</li><li>Stay updated on legislative changes and communicate them to relevant project stakeholders.</li></ul><p><strong>10. Professional Conduct</strong></p><br><ul><li>Set a personal example and promote a culture of safety, integrity, and professionalism.</li><li>Functionally report to the PMC HSEQ Manager while supporting the Project Director as required</li></ul><br>Qualifications<br><p><strong>Education</strong></p><br><ul><li>Bachelor’s degree in HSE, Engineering, or related field; or NEBOSH Diploma, NEBOSH IGC, or equivalent recognized HSE qualification.</li><li>ISO 45001:2018 Lead Auditor qualification preferred.</li><li>OSHAD/ADOSH Safety Practitioner Course</li></ul><p><strong>Experience</strong></p><br><ul><li>Minimum 8 years of HSE experience, ideally in utilities, transmission, EPC, or heavy civil projects</li><li>Minimum 3–5 years specifically as an HSE Engineer/Officer on construction projects.</li><li>Prior experience working with Supervision Consultants or in a PMC environment is required.</li><li>Experience in HSE implementation for high‑risk construction environments (e.g., substations, transmission lines, infrastructure) preferred.</li></ul><p><strong>Competencies</strong></p><br><ul><li>Strong communication, leadership, and stakeholder engagement skills.</li><li>Proficient in Microsoft Office applications.</li><li>Ability to interpret technical HSEQ documentation and regulatory requirements.</li><li>Skilled in incident investigation and risk assessment methodologies</li></ul><br>Additional Information<br><p>Join our social media conversations for more information about Turner &amp; Townsend and our exciting future projects:&nbsp;</p><br><p>Twitter</p><br><p>Instagram</p><br><p>LinkedIn</p><br><p><em>It is strictly against Turner &amp; Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner &amp; Townsend will ask candidates to pay a fee at any time.&nbsp;</em></p><br><p><em>Any unsolicited resumes/CVs submitted through our website or to Turner &amp; Townsend personal e-mail accounts, are considered property of&nbsp;Turner &amp; Townsend and are&nbsp;not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner &amp; Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team,&nbsp;to submit candidates for review.&nbsp;</em></p><br><p>Join our social media conversations for more information about Turner &amp; Townsend and our exciting future projects:&nbsp;</p><br><p>Twitter</p><br><p>Instagram</p><br><p>LinkedIn</p><br><br><br> </div>

Location: Abu Dhabi<br><br>Experience: 5–8 Years<br><br>Role Overview<br><br>We are seeking a highly motivated Site Reliability Engineer (SRE) to ensure the reliability, scalability, and performance of enterprise systems and cloud infrastructure.<br><br>The role combines software engineering and systems engineering practices to build and maintain secure, fault-tolerant, and high-performing distributed systems.<br><br>Key Responsibilities<br><br>Infrastructure & Cloud Engineering<br><br>Design and maintain scalable infrastructure on AWS and Azure cloud platforms. Support application deployment and system reliability across distributed environments. Manage and optimize cloud resources for availability and performance.<br><br>Development & Integration<br><br>Develop and support solutions using Java, . NET Core, and microservices architecture. Work with Oracle, SQL Server, and Mongo DB databases. Design and integrate APIs and enterprise systems.<br><br>Dev Ops & Automation<br><br>Build and manage CI/CD pipelines and automation frameworks. Use Docker and Kubernetes for containerization and orchestration. Implement monitoring, logging, and alerting strategies.<br><br>Security & Innovation<br><br>Apply cybersecurity and compliance standards across systems. Evaluate emerging technologies including AI/ML, blockchain, and digital wallets. Collaborate with teams using tools such as JIRA and Confluence.<br><br>Required Skills<br><br>Strong experience in cloud infrastructure and Dev Ops practices Expertise in Java/. NET, APIs, and distributed systems Knowledge of Docker, Kubernetes, and CI/CD tools Familiarity with database management and security frameworks Strong troubleshooting and communication skills<br><br>???? Apply Now: careers@d4insight.com

Location: Abu Dhabi<br><br>Experience: 5–8 Years<br><br>Role Overview<br><br>We are seeking a highly motivated Site Reliability Engineer (SRE) to ensure the reliability, scalability, and performance of enterprise systems and cloud infrastructure.<br><br>The role combines software engineering and systems engineering practices to build and maintain secure, fault-tolerant, and high-performing distributed systems.<br><br>Key Responsibilities<br><br>Infrastructure & Cloud Engineering<br><br>Design and maintain scalable infrastructure on AWS and Azure cloud platforms. Support application deployment and system reliability across distributed environments. Manage and optimize cloud resources for availability and performance.<br><br>Development & Integration<br><br>Develop and support solutions using Java, . NET Core, and microservices architecture. Work with Oracle, SQL Server, and Mongo DB databases. Design and integrate APIs and enterprise systems.<br><br>Dev Ops & Automation<br><br>Build and manage CI/CD pipelines and automation frameworks. Use Docker and Kubernetes for containerization and orchestration. Implement monitoring, logging, and alerting strategies.<br><br>Security & Innovation<br><br>Apply cybersecurity and compliance standards across systems. Evaluate emerging technologies including AI/ML, blockchain, and digital wallets. Collaborate with teams using tools such as JIRA and Confluence.<br><br>Required Skills<br><br>Strong experience in cloud infrastructure and Dev Ops practices Expertise in Java/. NET, APIs, and distributed systems Knowledge of Docker, Kubernetes, and CI/CD tools Familiarity with database management and security frameworks Strong troubleshooting and communication skills<br><br>???? Apply Now: careers@d4insight.com

Resident Engineer (RE) – Civil Discipline: Civil Engineering Experience: Minimum 8+ years Key Responsibilities Supervise and monitor all civil construction activities at the project site. Ensure work is executed as per approved drawings, specifications, and contract requirements. Coordinate with contractors, consultants, and client representatives to resolve technical and site-related issues. Monitor project progress and ensure adherence to project schedules and milestones. Review contractor submissions, shop drawings, method statements, and material approvals. Conduct site inspections and ensure compliance with quality standards and HSE regulations. Verify measurements, work quantities, and contractor invoices. Monitor manpower, equipment, and resource utilization. Identify construction risks and recommend corrective actions. Attend site meetings and prepare daily, weekly, and monthly progress reports. Ensure all site documentation and records are maintained accurately. Coordinate inspections, testing, and project handover activities. Required Skills Strong knowledge of civil construction practices and project execution. Experience in site supervision and construction management. Knowledge of international construction standards and codes. Ability to interpret engineering drawings and technical specifications. Excellent coordination, communication, and leadership skills. Strong problem-solving and decision-making abilities. Qualification.<br>Bachelor's Degree in Civil Engineering. Professional Engineering certification is an added advantage.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Build and own the backend platform for a non custodial crypto payment product: core APIs, merchant accounts, and transaction services using Node.js and TypeScript. Develop the point of sale (POS) software interface: amount entry in AED, QR code generation, and a two-state payment display (instant on chain “Payment Confirmed” and same day “AED Settled”). Build the merchant dashboard: transaction history, settlement status, analytics, and wallet/settings management. Develop a blockchain event listener that reads on chain payment events and updates the POS and dashboard in real time (the bridge between the smart contract and the user interface). Integrate a licensed third party OTC provider for AED settlement via API. Integrate transaction screening tools (e.g. Chainalysis, Scorechain) into the payment and onboarding flow. Own infrastructure and security: AWS, PostgreSQL, Redis, webhooks, CI/CD, authentication, and audit logging</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>5+ years in DevOps / cloud engineering</p></li><li><p>Deep AWS expertise: VPC, IAM, KMS, ECS/EKS, RDS</p></li><li><p>Strong Terraform and CI/CD experience</p></li><li><p>Production experience in fintech, banking, or crypto (preferred)</p></li><li><p>Security and compliance mindset</p></li><li><p>PostgreSQL in production at scale</p></li><li><p>UAE-based or willing to relocate</p></li><li><p>Founding-engineer mindset: comfortable owning systems end-to-end with no layers above you</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a qualified and detail-oriented Irrigation Engineer to design, implement, and maintain efficient irrigation systems for landscaping, agricultural, commercial, or infrastructure projects. The ideal candidate will have experience in irrigation design, water distribution systems, site supervision, and maintenance activities while ensuring compliance with project specifications and sustainability standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Design and develop irrigation systems including drip, sprinkler, and automated irrigation networks.</p></li><li><p>Prepare irrigation layouts, hydraulic calculations, and technical drawings.</p></li><li><p>Review project specifications, BOQs, and irrigation design requirements.</p></li><li><p>Supervise installation and maintenance of irrigation systems on-site.</p></li><li><p>Monitor water usage efficiency and recommend sustainable irrigation solutions.</p></li><li><p>Coordinate with landscape architects, MEP teams, contractors, and consultants.</p></li><li><p>Inspect irrigation materials, pumps, valves, pipelines, and control systems for quality compliance.</p></li><li><p>Troubleshoot irrigation system issues and recommend corrective actions.</p></li><li><p>Ensure compliance with safety, environmental, and municipality regulations.</p></li><li><p>Prepare technical reports, progress updates, and maintenance schedules.</p></li><li><p>Support testing, commissioning, and handover activities.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Agricultural Engineering, Civil Engineering, Landscape Engineering, or related field.</p></li><li><p>Minimum 3–8 years of irrigation engineering experience.</p></li><li><p>Strong knowledge of irrigation systems, pumps, hydraulics, and water management.</p></li><li><p>Experience with AutoCAD and irrigation design software.</p></li><li><p>Knowledge of landscaping and infrastructure projects preferred.</p></li><li><p>Good project coordination and communication skills.</p></li><li><p>UAE/GCC experience is an advantage.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Accelerated patch deployment with automated regression testing for mission-critical banking platforms, API security remediation aligned to OWASP API Security Top 10, CI/CD pipeline integration for security patch validation. Ensure timely security patch deployment with automated regression testing across multiple banking platforms (core, corporate, consumer, digital); remediate software vulnerabilities (e.g., addressing OWASP Top 10 and API security issues); integrate patch validation into CI/CD pipelines; prepare release notes &amp; impact assessments for production changes. This role is responsible for applying software patches and updates across critical banking applications while ensuring system stability. The engineer supports automated testing, fixes identified vulnerabilities, and works closely with DevOps teams to ensure updates are safely validated before release. Vendors should submit profiles with solid experience in software maintenance, testing, and secure release processes across enterprise systems. </p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Science, Information Security, or a related field; Master's preferred.</li><li>5+ years of experience in patch management, system administration, or DevOps roles with a security focus.</li><li>Relevant certifications such as CompTIA Security+, CEH, CISSP, or cloud-specific security certifications.</li><li>Proven experience in cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).</li></ul><p></p></section>