Curriculum Developer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>JOB DESCRIPTION </strong><br><strong> JOB TITLE CIVIL SUPERVISOR </strong><br><strong> DEPARTMENT ENGINEERING</strong> </p><p>PURPOSE &amp; SCOPE : Assisting project and to improve performance and productivity with proper resource <br> allocation and utilization. </p><p><strong>MAIN DUTIES &amp; RESPONSIBILITIES</strong><br> Recording the attendance of worker on daily basis and reporting to the engineer in <br> charge every morning. <br> Read &amp; understand drawing to guide Technical Team like Mason, Steel fixers, <br> Carpenters, Tiller &amp; Helper etc. <br> Estimation and supervision for all type of finishing work and Masonry work as per <br> actual site conditions. <br> Responsible for selection of proper material depending on the application of masonry <br> work. <br> Make sure Jobs are allotted as per planed Schedule and requirement <br> Ensuring the work is executed as per the drawings and the right schedule <br> Provide guideline for proper use of masonry equipment &amp; tools with safety. <br> Supervise for proper mixing of cement, plaster and adequate proportion <br> Prepare accurate reports of performed work daily, weekly &amp; monthly and submission <br> to engineer in charge. <br> Provide technical assistance to the construction team as needed <br> Monitor, verify, and document the work being performed through subordinates <br> Coordination and Close Monitoring of Subcontractor works <br> Coordinating with site in charges for work progress. <br> Preparing material request for various project. <br> Coordinate with the engineers &amp; supervisors to update regarding the progress. <br> Coordination with MEP Supervisor (team) to avoid any double work. <br> Keeping record of material delivered and informing engineer in charge in advance for <br> the required materials. <br> Receiving the material at site with ensuring that LPO IS Attached and material is <br> complying with MR. <br> Ensuring that time sheet for each month to be provided to site coordinator on time. <br> Keeping proper manpower transfer record. <br> Notifying the engineer in charge for any potential obstacles on site which can delay the <br> work. <br> As per operational requirement Employee may be deployed in any of the Emirates and <br> may be assigned to different department if and when required. <br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>MINIMUM REQUIREMENTS (EDUCATION &amp; EXPERIENCE) </strong></p><p><strong>Higher secondary / Diploma in similar field</strong></p><p><strong> Required 4-12 years experience in construction or related field </strong></p><br><p><strong>SKILLS &amp; COMPETENCIES </strong></p><p><strong>Proven ability to communicate clearly at all levels within a multi-cultural environment.</strong></p><p><strong>Supervision to Civil &amp; Fitout work including material take off, controlling Subcontractor work including MEP Site planning / resource calculation, reading drawings/blue prints</strong></p><p><strong>Communication and interpersonal skills &amp; Problem-solving skills.</strong></p><p></p></section>

Company Description<br><br>Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions. Always oriented towards technological innovation, the company’s purpose is “Engineering for a sustainable future”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than 50 countries around the world and employs about 30,000 people of over 130 nationalities.<br><br>Project: NFPS2<br><br>Job Title: Mechanical Completion Engineer<br><br>Location: <br><br>Qingdao, China<br><br>Job Description<br><br>Mission<br><br> Coordinate and supervise the mechanical completion, interfacing with other functions, defining and managing related documentation<br><br>Tasks<br><br> Review contractual documentation, for mechanical completion related issue and identifies the project requirements & constraints, and participate to project review meetings Verify that the mechanical completion requirements ar e accounted for into engineering documents Take part in project planning & scheduling Prepare and keep up-to-date the mechanical completion execution plans (including the mobilization of personnel) Supervise / coordinate th e preparation of the test pack (mechanical completion dossier) as per contractual requirements Supervise / coordinate the preparation of the Mechanical Completion procedure, definitions of the mechanical completion philosophy and preparation of all checklists and relevant check sheets; submit the procedure and check sheets to Company for approval Manage the Mechanical Completion software, verifying that all itemization data are complete Verify that check data form are coherent with identified items Ensure the interfaces with the Construction/Fabrication team and assist it as needed Participate to the preparation of the HSE Plan for Mechanical Completion Activities Define the specific temporary logistic required complying with the project scope of work, elaborate tools and method of control Take part in the project review meetings to make sure that the Mechanical completion requirements have been duly complied with Define and review mechanical completion consumables and materials Ensure the preparation and checking of the Purchase Requisitions (PR) and Technical Evaluation falling within his sphere of responsibility Assist during the definition of subcontractor scope of works if required Check the conformity and congruence of technical documentation received fr om Head Office Engineering and / or Client and shop drawings issued by yard Production Engineering and Methods function Ensure interface with vendor's representatives together with relevant Engineers / Superintendents Supervise / coodinate the inspection, checking and testing in order to assure the completeness and quality of the fabrication in accordance with design documentation and specifications, company standards and vendor’s instructions Supervise / review the mechanical completion dossier, submit to Company for review and certification Contribute, in collaboration with Yard Prod. Eng. Project Coordinator, to back charge notifications to vendors, for his sphere of responsibility Plan punch list activities and related workforce to accomplish it Manage and categorize punch list in coordination with other functions (engineering/construction/Client/quality/hookup/pre-commissioning/commissioning) Ensure that all the corrective actions to close the punch list are performed<br><br>What are we looking for?<br><br>Languages: English Language skills required<br><br>Technical Knowledge: offshore platforms fabrication<br><br>What We Can Offer To You<br><br>6 months contract re newable Corporate Benefits: We offer a comprehensive benefits package, including health insurance. Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.<br><br>Additional Information<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. As an Equal Opportunity Employer, we stand against discrimination based on gender identity, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of SAIPEM companies unique.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our career page: https://gps.ncorehr.com/

Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world’s leading energy companies.<br>We design, build, manage and maintain infrastructure for our clients. We recruit, reward, and develop our people based on merit regardless of race, nationality, religion, gender, age, sexual orientation, marital status or disability. We value our people and treat everyone who works for or with Petrofac fairly and without discrimination.<br>The world is re-thinking its energy supply and energy security needs, planning for a phased transition to alternative energy sources. We are here to help our clients meet these evolving energy needs.<br>This is an exciting time to join us on this journey.<br>Are you ready to bring the right energy to Petrofac and help us deliver a better future for everyone?<br>Job Title: Senior Supervisor - Commissioning (Process)<br>Scope of Responsibilities<br>Ensures that all commissioning activities are completed in a safe, efficient and cost effective manner. Provides day to day support to Commissioning Engineer/Commissioning Coordinator. Setting up technical teams and monitoring progress to schedule. Confirms/arranges suitable PPE is available to all personnel under him. Arranges PTW, Tool Box talks are completed in line with HSE requirements prior work start. Be continually present on the field to guarantee the quality and progress of the work. Ability to lead a team of technicians/operators/ sub-contractor and safely execute the work. Analyse team performance against schedule and report/advise any changes required to maintain progress to line management. Monitor availability of personnel to complete planned workloads. Liaise with other disciplines to ensure work fronts are available as required. Ensure transport is available for site teams. Look at initiatives to improve the work within pre-commissioning and commissioning. Prepare all testing dossiers along with proper document to safely execute the work (Drawings, procedures, etc…) Keep technically updated through the study of related technical literature including procedures and guidelines. Ensure correct tool packages are available along with detailed comprehensive commissioning procedures for individual jobs. Review spares, spare usage against plan. Investigate causes of defective operation of systems and equipment including interfaces to other systems and suggest modifications to equipment or operational conditions. Ensure that commissioning procedures are adhered to and complete all necessary documentation to facilitate work and up-date records. Ensure full compliance to company Fire & safety & Environment procedures/standards in all executed work-tasks and actively contributes to sections HSE. Identify potential HSSE risks (related to commissioning) and take appropriate steps to mitigate it. Ensure commissioning area is controlled, all energized systems clearly marked and barricaded off. Access control in place, SIMOPS carefully assessed and controlled. Give inputs to concern so as to ensure minimum standby time for vendor representative and avoid their revisits.<br>Accurate interpretation and understanding of P&IDs, process flow diagrams, circuit diagrams and control narratives; no rework or time lost due to incorrect interpretation. Review spares part usage against plan Perform any other related duties and responsibilities as and when directed by Supervisor.<br>Process:<br>Ability to assist in performing various activities related to pre-commissioning, commissioning and start-up of process systems such as chemical cleaning, leak testing, catalyst loading, steam blowing, package unit start-up and operation, inerting, plant start-up operation & stabilization. Ability to inspect all systems for operational readiness. Ensure LOTO is implemented for both Electrical and Mechanical components as required for the safe Commissioning and Start-Up of systems/plants Ensure commissioning area is controlled, all energized systems clearly marked and barricaded off. Access control in place. SIMOPS are carefully assessed and controlled. Able to assist in preparation of plans and specific method statements including P&ID mark ups for activities related to pre-commissioning, commissioning and start-up of process systems. Ability to startup and operate plants and guide operators during work execution. Ability to ensure stable plant/unit operations and monitor flow, level, temperature, pressure, etc. to ensure that plant/unit operates normally without trips/shutdown. Ability to assist in DCS operations such as alarm trips, logic, interlocks, permissive, overrides etc. Take part of plant start-up and operations.

Job Description<br><br>Job Overview:<br><br>The Principal Operations Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Operations-related problems and will work independently with minimal guidance. The Principal Operations Engineer may be responsible for leading functional teams or projects and are regarded as a specialist in the field of Operations. As such, they must have in-depth expertise in Operations as well as broad knowledge of the Operations discipline within the Fabrication function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Review and approve installation procedures and engineering to ensure they meet the project and McDermott minimum requirements and follow good engineering practices and enable work to be performed safely Supervise the Field Engineers in their planning and execution of the offshore project Supervise the Field Engineers during the preparation of material lists for construction materials and liaise with the Project Coordinator for procurement of requirements in a timely manner Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required Ensure there is coordination with the Fabrication/Loadout Contractor affecting operations under supervision Liaise with the fabrication hook-up group on the projects that they are responsible for and provide them with the required marine support equipment and logistics assistance Develop the scope of work, assist in the award of subcontracts, and then coordinate the same Review invoices received from vendors and subcontractors for errors or omissions in work performed or materials supplied Provide or coordinate input to the tender process as required Ensure conformance to Level 2 procedures for all the project-specific wire rope applications and rigging Manage the project fabrication inter/intra-function coordination throughout various phases with engineering, SCM, detail design, fabrication, and hook-up Identify resource needs for the fabrication portion of the project and report the fabrication status of the project with minimal guidance Lead and develop the project’s fabrication execution strategy Understand the overall project scope of work to lead and guide the multi-discipline production engineering team to meet project fabrication deliverables in line with the fabrication sequence/schedule Manages project fabrication progress within schedule, and productivity within targeted budget in coordination with the project Construction Manager and Project Construction Superintendent Appraises functional and project management on project fabrication status including issues which is expected to impact the forecasted progress, productivity, and schedule commitments with possible mitigation plans Lead the Fabrication Bid coordination efforts on assigned Bid projects including completing the deliverables to meet submission dates Interface with key project personnel from various functions like Engineering, SCM, Quality, Cost control, Marine Operations, hook up etc. to meet priorities and schedule dates for project fabrication requirements Ensure necessary documentation and compliance with procedural requirements throughout the project/Bid phases Establish a productive working relationship with client and third-party representatives Conduct Fabrication and Load out HAZID meeting with all project stakeholders and fab team Conduct Fabrication readiness meetings with all the functional leads and ensure the continuity of fabrication Manage any scope of work changes and ensure AFC estimates are getting updated in line with the scope changes Chair the fabrication kick-off meeting at the commencement of the project <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor’s degree in any relevant Engineering Discipline5 to 7 years of experience in the Offshore Industry At least 2 years of supervisory experience Working knowledge of design and offshore project execution <br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Principal Operations Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Operations-related problems and will work independently with minimal guidance. The Principal Operations Engineer may be responsible for leading functional teams or projects and are regarded as a specialist in the field of Operations. As such, they must have in-depth expertise in Operations as well as broad knowledge of the Operations discipline within the Fabrication function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Review and approve installation procedures and engineering to ensure they meet the project and McDermott minimum requirements and follow good engineering practices and enable work to be performed safely Supervise the Field Engineers in their planning and execution of the offshore project Supervise the Field Engineers during the preparation of material lists for construction materials and liaise with the Project Coordinator for procurement of requirements in a timely manner Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required Ensure there is coordination with the Fabrication/Loadout Contractor affecting operations under supervision Liaise with the fabrication hook-up group on the projects that they are responsible for and provide them with the required marine support equipment and logistics assistance Develop the scope of work, assist in the award of subcontracts, and then coordinate the same Review invoices received from vendors and subcontractors for errors or omissions in work performed or materials supplied Provide or coordinate input to the tender process as required Ensure conformance to Level 2 procedures for all the project-specific wire rope applications and rigging Manage the project fabrication inter/intra-function coordination throughout various phases with engineering, SCM, detail design, fabrication, and hook-up Identify resource needs for the fabrication portion of the project and report the fabrication status of the project with minimal guidance Lead and develop the project’s fabrication execution strategy Understand the overall project scope of work to lead and guide the multi-discipline production engineering team to meet project fabrication deliverables in line with the fabrication sequence/schedule Manages project fabrication progress within schedule, and productivity within targeted budget in coordination with the project Construction Manager and Project Construction Superintendent Appraises functional and project management on project fabrication status including issues which is expected to impact the forecasted progress, productivity, and schedule commitments with possible mitigation plans Lead the Fabrication Bid coordination efforts on assigned Bid projects including completing the deliverables to meet submission dates Interface with key project personnel from various functions like Engineering, SCM, Quality, Cost control, Marine Operations, hook up etc. to meet priorities and schedule dates for project fabrication requirements Ensure necessary documentation and compliance with procedural requirements throughout the project/Bid phases Establish a productive working relationship with client and third-party representatives Conduct Fabrication and Load out HAZID meeting with all project stakeholders and fab team Conduct Fabrication readiness meetings with all the functional leads and ensure the continuity of fabrication Manage any scope of work changes and ensure AFC estimates are getting updated in line with the scope changes Chair the fabrication kick-off meeting at the commencement of the project <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor’s degree in any relevant Engineering Discipline5 to 7 years of experience in the Offshore Industry At least 2 years of supervisory experience Working knowledge of design and offshore project execution <br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Deputy Construction Manager is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Operations-related problems and will work independently with minimal guidance. The Deputy Construction Manager may be responsible for leading functional teams or projects and are regarded as a specialist in the field of Operations. As such, they must have in-depth expertise in Operations as well as broad knowledge of the Operations discipline within the Fabrication function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Review and approve installation procedures and engineering to ensure they meet the project and McDermott minimum requirements and follow good engineering practices and enable work to be performed safely Supervise the Field Engineers in their planning and execution of the offshore project Supervise the Field Engineers during the preparation of material lists for construction materials and liaise with the Project Coordinator for procurement of requirements in a timely manner Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required Ensure there is coordination with the Fabrication/Loadout Contractor affecting operations under supervision Liaise with the fabrication hook-up group on the projects that they are responsible for and provide them with the required marine support equipment and logistics assistance Develop the scope of work, assist in the award of subcontracts, and then coordinate the same Review invoices received from vendors and subcontractors for errors or omissions in work performed or materials supplied Provide or coordinate input to the tender process as required Ensure conformance to Level 2 procedures for all the project-specific wire rope applications and rigging Manage the project fabrication inter/intra-function coordination throughout various phases with engineering, SCM, detail design, fabrication, and hook-up Identify resource needs for the fabrication portion of the project and report the fabrication status of the project with minimal guidance Lead and develop the project’s fabrication execution strategy Understand the overall project scope of work to lead and guide the multi-discipline production engineering team to meet project fabrication deliverables in line with the fabrication sequence/schedule Manages project fabrication progress within schedule, and productivity within targeted budget in coordination with the project Construction Manager and Project Construction Superintendent Appraises functional and project management on project fabrication status including issues which is expected to impact the forecasted progress, productivity, and schedule commitments with possible mitigation plans Lead the Fabrication Bid coordination efforts on assigned Bid projects including completing the deliverables to meet submission dates Interface with key project personnel from various functions like Engineering, SCM, Quality, Cost control, Marine Operations, hook up etc. to meet priorities and schedule dates for project fabrication requirements Ensure necessary documentation and compliance with procedural requirements throughout the project/Bid phases Establish a productive working relationship with client and third-party representatives Conduct Fabrication and Load out HAZID meeting with all project stakeholders and fab team Conduct Fabrication readiness meetings with all the functional leads and ensure the continuity of fabrication Manage any scope of work changes and ensure AFC estimates are getting updated in line with the scope changes Chair the fabrication kick-off meeting at the commencement of the project <br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s degree in any relevant Engineering Discipline5 to 7 years of experience in the Offshore Industry At least 2 years of supervisory experience Working knowledge of design and offshore project execution <br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job description:<br><br> Job Purpose Responsible for managing inquiries and tenders, preparing technical documentation, and coordinating materials to enhance the company’s competitive edge. This role involves monitoring market trends, providing engineering support, and building strong customer relationships to maximize project success and satisfaction. Key Accountability Areas Efficient Inquiry and Tender Management: Supervise and track all incoming inquiries and tenders efficiently. Provide optimal responses to customers. Supportive Documents and Samples Preparation: Prepare supportive documents, samples, and submittals. Deliver them to customers to enhance alfanar's chances. Material Preparation and Coordination: Collaborate with the department’s coordinator/Demand Planning to prepare required materials. Ensure timely delivery of materials to customers. Competitor Monitoring and Reporting: Monitor and analyze competitors’ activities. Report findings to sales management. Market Presence and Technical Support: Coordinate technical meetings and seminars. Provide technical support to increase alfanar's awareness and presence in the market. Collaborate with related parties for successful execution. Reporting and Customer Management: Generate effective and timely reports for management. Manage customers in a professional manner. Project Identification and Follow-up: Identify and track all related projects. Conduct close follow-ups to maximize project realization. Customer Satisfaction and Payment Management: Follow-up on customer satisfaction levels (number of highly satisfied customers). Collect payments promptly to prevent overdue payments (Maintain zero over-dues). Data Management and Forecasting: Update and maintain the database for all projects through C4C. Avoid inaccurate forecasts that may lead to financial costs associated with projected stock. Role Accountability HR Proficiency Training of sub-ordinates and forming a team to get the work effectively achieved. Provide leadership, coaching, and direction to subordinates in all aspects of their work. Delegate sub-ordinates in each respective assignment. Ensures fair distribution of tasks to maintain morale, motivation of subordinates. Delivery Perform the planned activities to meet the operational and development targets as per delivery schedules. Utilize resources effectively to achieve objectives within efficient cost and time. Provide a periodic report formatted by detailing the deviation and execution of planned tasks. Problem-solving Resolve any related problems arise and escalate any complex operational issues. Quality Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities. Business Process Improvements (Effectiveness) Coordinate well-defined written systems, policies, procedures, and seeking automations opportunities as much as possible. Compliance Comply to related policy & procedures and work instructions. Safety Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services. Academic Qualification Bachelor Degree in Electrical Engineering Work Experience 4 to 6 Years Technical / Functional Competencies Sales Forecasting Sales Promotions Sales Trend Analysis Sales Presentations Sales Technical Support Sales Tools <br><br>Profile description:<br><br>Alfanar is a Saudi company with an international presence, primarily engaged in the manufacturing and trading of a wide variety of low, medium, and high voltage electrical products, in addition to its portfolio of conventional and renewable energy solutions, oil and gas, water treatment, infrastructure, technical services, and digital solutions. The hub of alfanar’s manufacturing operations is Medinet alfanar Alsinaiya, a 700,000 square-meter complex located in Riyadh. The complex houses an array of ultra-modern manufacturing facilities and laboratories equipped with state-of-the-art technologies and staffed with highly skilled professionals. alfanar derives its success from its commitment to providing the highest quality standards to its customers, and the continuous development of its human capital, who alfanar considers its most valuable asset. With this in mind, alfanar promotes a proactive work environment where its employees are always valued, nurtured, and empowered to fuel their pride in being part of alfanar. For more information about alfanar, please visit alfanar.com

Job description:<br><br> Job Purpose Responsible for managing inquiries and tenders, preparing technical documentation, and coordinating materials to enhance the company’s competitive edge. This role involves monitoring market trends, providing engineering support, and building strong customer relationships to maximize project success and satisfaction. Key Accountability Areas Efficient Inquiry and Tender Management: Supervise and track all incoming inquiries and tenders efficiently. Provide optimal responses to customers. Supportive Documents and Samples Preparation: Prepare supportive documents, samples, and submittals. Deliver them to customers to enhance alfanar's chances. Material Preparation and Coordination: Collaborate with the department’s coordinator/Demand Planning to prepare required materials. Ensure timely delivery of materials to customers. Competitor Monitoring and Reporting: Monitor and analyze competitors’ activities. Report findings to sales management. Market Presence and Technical Support: Coordinate technical meetings and seminars. Provide technical support to increase alfanar's awareness and presence in the market. Collaborate with related parties for successful execution. Reporting and Customer Management: Generate effective and timely reports for management. Manage customers in a professional manner. Project Identification and Follow-up: Identify and track all related projects. Conduct close follow-ups to maximize project realization. Customer Satisfaction and Payment Management: Follow-up on customer satisfaction levels (number of highly satisfied customers). Collect payments promptly to prevent overdue payments (Maintain zero over-dues). Data Management and Forecasting: Update and maintain the database for all projects through C4C. Avoid inaccurate forecasts that may lead to financial costs associated with projected stock. Role Accountability HR Proficiency Training of sub-ordinates and forming a team to get the work effectively achieved. Provide leadership, coaching, and direction to subordinates in all aspects of their work. Delegate sub-ordinates in each respective assignment. Ensures fair distribution of tasks to maintain morale, motivation of subordinates. Delivery Perform the planned activities to meet the operational and development targets as per delivery schedules. Utilize resources effectively to achieve objectives within efficient cost and time. Provide a periodic report formatted by detailing the deviation and execution of planned tasks. Problem-solving Resolve any related problems arise and escalate any complex operational issues. Quality Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities. Business Process Improvements (Effectiveness) Coordinate well-defined written systems, policies, procedures, and seeking automations opportunities as much as possible. Compliance Comply to related policy & procedures and work instructions. Safety Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services. Academic Qualification Bachelor Degree in Electrical Engineering Work Experience 4 to 6 Years Technical / Functional Competencies Sales Forecasting Sales Promotions Sales Trend Analysis Sales Presentations Sales Technical Support Sales Tools <br><br>Profile description:<br><br>Alfanar is a Saudi company with an international presence, primarily engaged in the manufacturing and trading of a wide variety of low, medium, and high voltage electrical products, in addition to its portfolio of conventional and renewable energy solutions, oil and gas, water treatment, infrastructure, technical services, and digital solutions. The hub of alfanar’s manufacturing operations is Medinet alfanar Alsinaiya, a 700,000 square-meter complex located in Riyadh. The complex houses an array of ultra-modern manufacturing facilities and laboratories equipped with state-of-the-art technologies and staffed with highly skilled professionals. alfanar derives its success from its commitment to providing the highest quality standards to its customers, and the continuous development of its human capital, who alfanar considers its most valuable asset. With this in mind, alfanar promotes a proactive work environment where its employees are always valued, nurtured, and empowered to fuel their pride in being part of alfanar. For more information about alfanar, please visit alfanar.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking a Senior Piping Material Engineer, reporting directly to <i>the Head of the Department</i> to join our team based in <i>UAE, Abu Dhabi</i>.</p><br><p><strong>About us:</strong></p><br><p>Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.</p><br><p>Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.</p><br><p><strong>About the mission we offer you:</strong></p><br><p>QUALIFICATIONS:</p><br><p>Specialist engineer degree in Mechanical Engineering with minimum 12 years experience out of which minimum 5 years in a senior position with specialisation in Piping Material activities such as preparation of piping specifications, piping classes, job specification, piping requisitions (MR/SR), bid evaluation, Technical Bid tabulation, MTO co-ordination etc.</p><br><p>RESPONSIBILITIES / PROFILE:</p><br><p>Report operationally to the Lead Piping Engineer with the following responsibilities / profile, as a minimum:</p><br><p>(i) Should be well versed with ASME B 31.3 and other ASME, ASTM, BS, NACE, ISO codes and standards for piping design and materials.</p><br><p>(ii) Should be able to work independently and under pressure, pro-active, co-operating, communicative, analytical, cost conscious and dutiful.</p><br><p>(iii) Should have knowledge and experience in piping MTO concept and exposure to piping material management system. Knowledge of MARIAN will be an added advantage.</p><br><p>(iv) Preparation and checking of Piping classes, specification for Piping bulk and valves, Data sheet for valves and piping speciality items, Material requisition for piping bulk, valves and piping speciality items.</p><br><p>(v) To perform various piping design calculations like pipe wall thickness, branch reinforcement, blind calculation etc. as required for the project.</p><br><p>(vi) To review and understand client specification and implement their requirements to the assigned project.</p><br><p>(vii) Technical bid evaluation, technical discussions with client / vendors and preparing technical bid tabulation.</p><br><p>(viii) To review and implement process and layout requirements for special valves and piping speciality items.</p><br><p>(ix) Provides techno-economical alternative in design / material, if necessary, by ensuring compliance with code requirements and other project specifications.</p><br><p>(x) Co-ordinate with piping lead engineers, design engineers and designers as well as with other disciplines to establish various technical and material related details.</p><br><p>(xi) Coordinating with ADPS administrator, Lead Engineer and GMINI/MARIAN coordinator for providing and updating various database files and RDB files for PDS / PDMS.</p><br><p>(xii) To co-ordinate MTO activities on project or EPC proposal independently.</p><br><p>(xiii) Vendor drawing review in VDB.</p><br><p><i>Starting Date: ASAP</i></p><br><p><strong>About you:</strong></p><br><p>We love to hear from you and how you match with this position. To be successful in this mission you should consider the following requirements:</p><br><p>Qualifications: Bachelors or Diploma</p><br><p>Languages: <i>English + proficiency level (Basic, Professional, Fluent)</i></p><br><p>Main skills: <i>(up to 4)</i></p><br><p><strong>Your career with us&nbsp;</strong></p><br><p>Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T. EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.</p><br><p>&nbsp;<strong>What’s Next?</strong></p><br><p>Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with a reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.&nbsp;</p><br><p>We invite you to get to know more about our company by visiting&nbsp;www.ten.com&nbsp;and follow us on&nbsp;LinkedIn,&nbsp;Instagram,&nbsp;Facebook,&nbsp;X&nbsp;and&nbsp;YouTube&nbsp;for company updates.</p><br><br> </div>

Job Description<br><br>Aldar Education is currently seeking a Registrar (UAE National) to support our growing family of owned, operated and managed schools , based in Abu Dhabi.<br><br>As the leading education group in Abu Dhabi, we provide inclusive and innovative learning that inspires and empowers communities. We offer a range of brands for all learners in our community, from nursery through to adult education. We offer the broadest choice of curricula. In the largest number of locations in Abu Dhabi.<br><br>Starting with one school and 250 students in 2007, Aldar Education has grown into a highly sought-after education provider, now supporting over 38,000 students in 31 schools and a growing network of almost 5,000 educators, with over 100 nationalities, offering a wide range of curricula and ancillary services such as a Teacher Training Academy.<br><br>Working collaboratively, our education network’s purpose is to empower the next generation to shape our future, directly supporting the educational goals of Abu Dhabi’s government. Today, Aldar Education’s efforts are guided by the Abu Dhabi Economic Vision 2030 plan, which aims to build a sustainable knowledge-based economy through premium education. To manage and achieve AE education/non education recruitment objectives and meet the organization staffing needs.<br><br>Responsibilities<br><br>Main Duties<br><br>Overall responsibility of Enrolments and Registration for the School, working closely with the Senior Leadership within the School and HQ Enrolments. Manage accurate data on applications, enrolments, and registrations to ensure accurate figures are available daily. Meet with enrolled parents, explain registration procedures, curriculum, fee structure, e SIS regulations and ensure all documentation is completed effectively. Respond to registration enquiries, telephone calls and emails in a timely and courteous manner. Oversee the assessments process with the academic team as required, to ensure the enrolment process is efficient. Oversee the waiting list (if applicable), maintain standard communication with the waitlisted parents in a timely manners and update on the application status accordingly. Manage the registration files for all new and existing students.<br><br><br>Specific Duties<br><br>Keep up to date with the rules and regulations of ADEK and ensure compliance during the enrolment and completing the registration process. Managing e SIS (student information system) including student registration, withdrawals, transfers, and pre-transition. Develop and maintain strong relationship with ADEK’s student affairs department. Ensure that all parents facing areas are clean, uncluttered and convey a welcoming environment to students and parents. Manage leads and qualify enquiries and be the first point of contact for prospective parents. As part of the Front of House team, ensure high quality delivery of school tours to parents and visitors as required. Attend SLT meetings when required to update on enrolments at the school. Work with the PRE to identify strategies for attracting new enrolments and student retention. Manage the reenrollment process for existing parents in conjunction with the PRE, providing regular analysis of the updates to the Head of Enrolments and Principal. Provide the Head of Enrolments with weekly and monthly reports and projections on enrolments Attend networking events to promote the school. Organise and attend enrolment events for the school. Develop and maintain strong partnerships with feeder nurseries and schools Represent the ethos and standard of excellence of Aldar Education to all prospective parents. Perform other duties as requested by direct and dotted line reporting managers/ supervisors. To work collaboratively with the Admissions officer to take on additional tasks when requited to support Enrolments and Registration and to provide cover in the absence of the other team member. Perform all other duties as requested by direct and dotted line reporting managers/ supervisors in a timely manner.<br><br><br>Qualifications<br><br>Minimum Qualifications<br><br>Bachelor Degree required<br><br><br>Minimum Experience<br><br>Experience as Admissions/Registrar in the education field Abu Dhabi based with Abu Dhabi competitors’ knowledge A minimum of 2years of experience in a customer focused role in the region Strong CRM & SIS experience . Previous experience in data management<br><br><br>Job Specific Knowledge & Skills<br><br>Fluent in English Communications skills, written, and oral. Arabic speaker is preferable. Strong interpersonal skills to aid in daily contact with parents in a diverse multi-cultural environment. Excellent office management skills. A high level of professionalism and consideration of the well-being of children. Respect for all members of a school community. A positive and solution-focused attitude to working life.<br><br><br>WHAT WE OFFER:<br><br>Aldar Education is a family of world-class, child centered, and innovative schools based in the UAE. We educate over 34,000 students across our group of owned and managed schools and as we grow so does our need for highly skilled, inspirational, and dedicated school leaders. We offer an attractive remuneration package including medical cover, flights, housing, and free child school places. Our future-focused learning model includes both students and staff so we place a special emphasis on professional development, coaching and training.<br><br>Successful candidates will have access to a wide network of professionals and opportunities to both lead and contribute to training others as well as developing themselves.<br><br>Aldar Education is keen to hear from like-minded, forward thinking school leaders who would welcome the challenges and opportunities that we have to offer.<br><br>This job description is not all inclusive. Aldar Education reserves the right to amend this job description at any time. We are an equal opportunity employer, committed to a diverse and inclusive work environment. We are also mindful of our national development strategy and encourage UAE Nationals in their application at our company.<br><br>Aldar Education is committed to safeguarding and promoting the welfare of children and young people and expects all staff to share this commitment. Offers of appointment are subject to satisfactory references and police clearance.

The College of Engineering (CEN) at American University of Sharjah (AUS) invites applicants for the position of the Head of the Department of Chemical and Biological Engineering (CHBE) starting Fall 2027. The college is seeking a visionary academic leader with the responsibilities of ensuring smooth and successful operation and sustainable development of the department.<br><br>The candidate for the position must hold earned degrees, including a doctorate, in chemical engineering or a related field. The candidate must have demonstrated leadership in research, as evidenced by her/his outstanding publication record. In addition, a demonstrated record of excellence in teaching, and in academic and relevant professional services is required. The selected individual will have the opportunity to develop and articulate a vision and long-range plan for the department in teaching and in research strategy that embodies the relevant areas that are vital to the department and the region. Special consideration will be given to candidates with a clear vision and achievable goals that are in line with the college’s and university’s strategic plans.<br><br>Responsibilities<br><br>The successful candidate must be a dynamic, collaborative, visionary and innovative individual with demonstrated leadership experience that can promote the continued advancement of the department. He/she is expected to have strong communication skills to effectively engage with a wide variety of constituents within and outside the university. His/her leadership style should include positive attitude, transparency, integrity, trust, fairness, promptness and collegiality. In addition to the general and wide responsibilities of the department head position, as partially outlined in the Faculty Handbook, the selected applicant will be required to:<br><br>provide effective leadership with well-defined plans to nurture and elevate the standard of the department, accompanied with the development of short-term and long-term strategies in alignment with the strategic plans of the college and the universityensure high-quality teaching as well as holistic development of the students, using approaches such as technology supported delivery, problem-based learning, and other cutting-edge trends in engineering education, in addition to leading the continuous improvement of the curriculumfacilitate the conduct of innovative and cutting-edge research of high-quality and impact and promote multidisciplinary research with the optimal use of research funds and research facilitiesempower, mentor, promote, inspire and support faculty and staff to develop and sustain excellence in teaching, research and servicefoster a positive culture of innovation and entrepreneurship among faculty and studentsimprove continuously teaching, research and service through benchmarkinglead the department in achieving student recruitment goals by establishing and implementing recruitment plans for undergraduate and graduate studentsenrich the students’ experience via enhanced services, exchange visits, invited speakers, field trips, student clubs, professional certifications, competitions, conferences, etc.secure full-time and internship positions and provide undergraduate research experience to the studentsparticipate in outreach activities, including maintaining ties and collaborations with alumni, industry, government, advisory boards, other university units and community members, and maintaining involvement in local and international professional organizationsadvertise locally and publicly the achievements and expertise of the faculty, staff and students of the department through web, newsletters and media exposure to enhance the academic reputation of the programcollect data systematically and continuously from the department to plan and execute informed decisionsensure and increase diversity and equity in faculty hiring and student recruitmentmaintain and actively promote a positive, safe, transparent, fair, open, respectful, collegial working environment at the department, college and universityinteract and communicate effectively with individual faculty, staff and students (and parents) on a range of professional and personal issuesrepresent the faculty and staff and convey their needs to the college’s and university’s administration.oversee the department’s operations including scheduling, advising, registration, lab preparations, budget allocation, compliance and risk management, etc.review and coordinate faculty course releases, sabbaticals and leave without pay requestsconduct fair faculty and staff annual evaluations and provide effective feedbackevaluate faculty and staff for promotion and/or rolling contract decisionslead and manage accreditation visitsperforming other duties as needed or assigned by the Dean<br><br>Applicants should fill out an application form and upload the required documents (PDF) using the following link. The required documents are a cover letter and a detailed curriculum vitae (including a teaching statement, a research statement, vision and goals for the department, list of courses that can be taught or were taught, and names of at least three references who would be willing to write letters of recommendation). Positions are open until filled. Only shortlisted candidates will be contacted.<br><br>The Department of Chemical and Biological Engineering has approximately 200 undergraduate students, 15 graduate students, 12 full-time faculty and 3 lab instructors. Students and faculty represent very diverse backgrounds and nationalities; approximately 90 nationalities are present on campus. The department offers a Bachelor of Science in Chemical Engineering, a Bachelor of Science in Chemical and Biological Engineering, and a Master of Science in Chemical Engineering.<br><br>AUS is located in the Emirate of Sharjah (about 15 km from Dubai). AUS is an independent, not-for-profit, coeducational university, serving more than 5,700 students. Further information can be obtained here.<br><br>AUS is licensed and its programs are accredited by the Commission for Academic Accreditation of the Ministry of Education's Higher Education Affairs Division in the United Arab Emirates. AUS has been accredited in the United States of America by the Middle States Commission on Higher Education (1007 North Orange Street, 4th Floor, MB #166, Wilmington, DE 19801 USA) since June 2004. The Bachelor of Science in Chemical Engineering offered by the College of Engineering is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org/.

The College of Engineering (CEN) at American University of Sharjah (AUS) invites applicants for the position of the Head of the Department of Chemical and Biological Engineering (CHBE) starting Fall 2027. The college is seeking a visionary academic leader with the responsibilities of ensuring smooth and successful operation and sustainable development of the department.<br><br>The candidate for the position must hold earned degrees, including a doctorate, in chemical engineering or a related field. The candidate must have demonstrated leadership in research, as evidenced by her/his outstanding publication record. In addition, a demonstrated record of excellence in teaching, and in academic and relevant professional services is required. The selected individual will have the opportunity to develop and articulate a vision and long-range plan for the department in teaching and in research strategy that embodies the relevant areas that are vital to the department and the region. Special consideration will be given to candidates with a clear vision and achievable goals that are in line with the college’s and university’s strategic plans.<br><br>Responsibilities<br><br>The successful candidate must be a dynamic, collaborative, visionary and innovative individual with demonstrated leadership experience that can promote the continued advancement of the department. He/she is expected to have strong communication skills to effectively engage with a wide variety of constituents within and outside the university. His/her leadership style should include positive attitude, transparency, integrity, trust, fairness, promptness and collegiality. In addition to the general and wide responsibilities of the department head position, as partially outlined in the Faculty Handbook, the selected applicant will be required to:<br><br>provide effective leadership with well-defined plans to nurture and elevate the standard of the department, accompanied with the development of short-term and long-term strategies in alignment with the strategic plans of the college and the universityensure high-quality teaching as well as holistic development of the students, using approaches such as technology supported delivery, problem-based learning, and other cutting-edge trends in engineering education, in addition to leading the continuous improvement of the curriculumfacilitate the conduct of innovative and cutting-edge research of high-quality and impact and promote multidisciplinary research with the optimal use of research funds and research facilitiesempower, mentor, promote, inspire and support faculty and staff to develop and sustain excellence in teaching, research and servicefoster a positive culture of innovation and entrepreneurship among faculty and studentsimprove continuously teaching, research and service through benchmarkinglead the department in achieving student recruitment goals by establishing and implementing recruitment plans for undergraduate and graduate studentsenrich the students’ experience via enhanced services, exchange visits, invited speakers, field trips, student clubs, professional certifications, competitions, conferences, etc.secure full-time and internship positions and provide undergraduate research experience to the studentsparticipate in outreach activities, including maintaining ties and collaborations with alumni, industry, government, advisory boards, other university units and community members, and maintaining involvement in local and international professional organizationsadvertise locally and publicly the achievements and expertise of the faculty, staff and students of the department through web, newsletters and media exposure to enhance the academic reputation of the programcollect data systematically and continuously from the department to plan and execute informed decisionsensure and increase diversity and equity in faculty hiring and student recruitmentmaintain and actively promote a positive, safe, transparent, fair, open, respectful, collegial working environment at the department, college and universityinteract and communicate effectively with individual faculty, staff and students (and parents) on a range of professional and personal issuesrepresent the faculty and staff and convey their needs to the college’s and university’s administration.oversee the department’s operations including scheduling, advising, registration, lab preparations, budget allocation, compliance and risk management, etc.review and coordinate faculty course releases, sabbaticals and leave without pay requestsconduct fair faculty and staff annual evaluations and provide effective feedbackevaluate faculty and staff for promotion and/or rolling contract decisionslead and manage accreditation visitsperforming other duties as needed or assigned by the Dean<br><br>Applicants should fill out an application form and upload the required documents (PDF) using the following link. The required documents are a cover letter and a detailed curriculum vitae (including a teaching statement, a research statement, vision and goals for the department, list of courses that can be taught or were taught, and names of at least three references who would be willing to write letters of recommendation). Positions are open until filled. Only shortlisted candidates will be contacted.<br><br>The Department of Chemical and Biological Engineering has approximately 200 undergraduate students, 15 graduate students, 12 full-time faculty and 3 lab instructors. Students and faculty represent very diverse backgrounds and nationalities; approximately 90 nationalities are present on campus. The department offers a Bachelor of Science in Chemical Engineering, a Bachelor of Science in Chemical and Biological Engineering, and a Master of Science in Chemical Engineering.<br><br>AUS is located in the Emirate of Sharjah (about 15 km from Dubai). AUS is an independent, not-for-profit, coeducational university, serving more than 5,700 students. Further information can be obtained here.<br><br>AUS is licensed and its programs are accredited by the Commission for Academic Accreditation of the Ministry of Education's Higher Education Affairs Division in the United Arab Emirates. AUS has been accredited in the United States of America by the Middle States Commission on Higher Education (1007 North Orange Street, 4th Floor, MB #166, Wilmington, DE 19801 USA) since June 2004. The Bachelor of Science in Chemical Engineering offered by the College of Engineering is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org/.

The College of Engineering (CEN) at American University of Sharjah (AUS) invites applicants for the position of the Head of the Department of Chemical and Biological Engineering (CHBE) starting Fall 2027. The college is seeking a visionary academic leader with the responsibilities of ensuring smooth and successful operation and sustainable development of the department.<br><br>The candidate for the position must hold earned degrees, including a doctorate, in chemical engineering or a related field. The candidate must have demonstrated leadership in research, as evidenced by her/his outstanding publication record. In addition, a demonstrated record of excellence in teaching, and in academic and relevant professional services is required. The selected individual will have the opportunity to develop and articulate a vision and long-range plan for the department in teaching and in research strategy that embodies the relevant areas that are vital to the department and the region. Special consideration will be given to candidates with a clear vision and achievable goals that are in line with the college’s and university’s strategic plans.<br><br>Responsibilities<br><br>The successful candidate must be a dynamic, collaborative, visionary and innovative individual with demonstrated leadership experience that can promote the continued advancement of the department. He/she is expected to have strong communication skills to effectively engage with a wide variety of constituents within and outside the university. His/her leadership style should include positive attitude, transparency, integrity, trust, fairness, promptness and collegiality. In addition to the general and wide responsibilities of the department head position, as partially outlined in the Faculty Handbook, the selected applicant will be required to:<br><br>provide effective leadership with well-defined plans to nurture and elevate the standard of the department, accompanied with the development of short-term and long-term strategies in alignment with the strategic plans of the college and the universityensure high-quality teaching as well as holistic development of the students, using approaches such as technology supported delivery, problem-based learning, and other cutting-edge trends in engineering education, in addition to leading the continuous improvement of the curriculumfacilitate the conduct of innovative and cutting-edge research of high-quality and impact and promote multidisciplinary research with the optimal use of research funds and research facilitiesempower, mentor, promote, inspire and support faculty and staff to develop and sustain excellence in teaching, research and servicefoster a positive culture of innovation and entrepreneurship among faculty and studentsimprove continuously teaching, research and service through benchmarkinglead the department in achieving student recruitment goals by establishing and implementing recruitment plans for undergraduate and graduate studentsenrich the students’ experience via enhanced services, exchange visits, invited speakers, field trips, student clubs, professional certifications, competitions, conferences, etc.secure full-time and internship positions and provide undergraduate research experience to the studentsparticipate in outreach activities, including maintaining ties and collaborations with alumni, industry, government, advisory boards, other university units and community members, and maintaining involvement in local and international professional organizationsadvertise locally and publicly the achievements and expertise of the faculty, staff and students of the department through web, newsletters and media exposure to enhance the academic reputation of the programcollect data systematically and continuously from the department to plan and execute informed decisionsensure and increase diversity and equity in faculty hiring and student recruitmentmaintain and actively promote a positive, safe, transparent, fair, open, respectful, collegial working environment at the department, college and universityinteract and communicate effectively with individual faculty, staff and students (and parents) on a range of professional and personal issuesrepresent the faculty and staff and convey their needs to the college’s and university’s administration.oversee the department’s operations including scheduling, advising, registration, lab preparations, budget allocation, compliance and risk management, etc.review and coordinate faculty course releases, sabbaticals and leave without pay requestsconduct fair faculty and staff annual evaluations and provide effective feedbackevaluate faculty and staff for promotion and/or rolling contract decisionslead and manage accreditation visitsperforming other duties as needed or assigned by the Dean<br><br>Applicants should fill out an application form and upload the required documents (PDF) using the following link. The required documents are a cover letter and a detailed curriculum vitae (including a teaching statement, a research statement, vision and goals for the department, list of courses that can be taught or were taught, and names of at least three references who would be willing to write letters of recommendation). Positions are open until filled. Only shortlisted candidates will be contacted.<br><br>The Department of Chemical and Biological Engineering has approximately 200 undergraduate students, 15 graduate students, 12 full-time faculty and 3 lab instructors. Students and faculty represent very diverse backgrounds and nationalities; approximately 90 nationalities are present on campus. The department offers a Bachelor of Science in Chemical Engineering, a Bachelor of Science in Chemical and Biological Engineering, and a Master of Science in Chemical Engineering.<br><br>AUS is located in the Emirate of Sharjah (about 15 km from Dubai). AUS is an independent, not-for-profit, coeducational university, serving more than 5,700 students. Further information can be obtained here.<br><br>AUS is licensed and its programs are accredited by the Commission for Academic Accreditation of the Ministry of Education's Higher Education Affairs Division in the United Arab Emirates. AUS has been accredited in the United States of America by the Middle States Commission on Higher Education (1007 North Orange Street, 4th Floor, MB #166, Wilmington, DE 19801 USA) since June 2004. The Bachelor of Science in Chemical Engineering offered by the College of Engineering is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org/.

Job description:<br><br>The qualities we look for Lipton Teas and Infusions is made up of a special blend of individuals which make our teams exciting and diverse. To be part of our tea family, whether for a short period or over the long term, we are looking for individuals who think Green and are environmentally conscious, who understand the power of simplicity and who are accountable for their actions. We want those who infuse mastery and passion in everything they do to create great products and unforgettable experiences for our consumers. What's in it for you? We believe that growth is for everyone; we believe in growing leaders who have an owner’s mentality. We believe in connections over hierarchies. We have a 'corporate start-up' approach; we act with speed and agility to tackle knotty business challenges. We aim to build the future ready, value driven, transparent and real time supply chain ecosystem through disruptive digital transformation. We are seeking a team member with the passion to lead the pace of change, experience to create digital solutions and entrepreneurship to deliver business results. Job Summary:The Industrial Engineer will be responsible for evaluating existing processes and systems to identify opportunities for cost savings, process enhancements, and quality improvement. The ideal candidate will optimize manufacturing efficiency, improve Overall Equipment Effectiveness (OEE), optimize the utilization of resources (assets/labor/expenses) by measuring current performance, inspire and lead Kaizen and Continuous Improvement initiatives while ensuring compliance with food safety and quality standards, and oversee the implementation of consumer activities within the factory. Key Responsibilities:SHEQ: Implement and adhere to all Lipton health, safety, food safety and environmental procedures to ensure a secure working environment for the entire team, while comprehending individual legal obligations. Demonstrate a comprehensive understanding of material handling ergonomics. Contribute to reducing environmental impacts and costs associated with utilities, chemicals, and operational wastes by optimizing eco-efficient operations. Foster a safe working environment including food safety and actively participate in the factory's hazard reporting process. Monitor product quality against established standards, promptly report any product or packaging faults, detect process abnormalities, and take emergency measures to prevent them. Proficient in conducting basic quality checks. Maintain hygienic operations throughout production. Ensure Machinery Safety and CRQS are done as per the standard frequency. Operations: Operate machinery according to instructions to achieve maximum efficiency while adhering to safety and quality standards. Ensure all process parameters are accurately set and take corrective actions to prevent deviations from product specifications. • Maintain high levels of line and machine cleanliness, adhering to standard cleaning procedures and 5S. Perform minor machine adjustments and troubleshooting. Perform machine blend and format changeovers. Engage in continuous improvement projects such as Kaizen initiatives and prioritize minimizing production losses. Undertake additional duties as required. Operates various technologies effectively. Performs on time escalations to Manufacturing Coordinator or Team Leader about Safety, Quality and Productivity non-compliance. Experience: Minimum of 2 years’ experience in a manufacturing company with high safety, quality standards and familiarity with GMP. Teabag experience (particularly Perfecta, IMA), Filling, Overwrapping, and Case packing technologies with a minimum of 1 year is an advantage. Experience working as part of a collaborative team in the manufacturing sector. Strong team player with excellent communication skills. Skills & Requirements: Flexibility to work shifts to accommodate factory operations, shutdowns, and training. Ability to adapt quickly to changes on the production line. Self-motivated with a commitment to personal and team growth. Ability to align work output with company requirements. Possess Initiative and punctuality. Basic computer proficiency. Fundamental mechanical knowledge and problem-solving skills in a factory setting. Proficiency in English (speaking, reading, and writing) and mathematics. Key Contacts: Manufacturing Manager SSHE Manager Quality Manager HR Manager Man Ex Manager Skills Trainer Operators and Technicians What we can offer you We believe that growth is for everyone, we believe in growing leaders and making space to grow an owner’s mentality and like nature we adapt, we change, and we grow. We believe in connections over hierarchies and (work) levels. We have a 'corporate start-up' approach; we act with speed and agility, and we have the strength and scale of a large corporation. We are building a better world of wellbeing and a better you.

Job description:<br><br>The qualities we look for Lipton Teas and Infusions is made up of a special blend of individuals which make our teams exciting and diverse. To be part of our tea family, whether for a short period or over the long term, we are looking for individuals who think Green and are environmentally conscious, who understand the power of simplicity and who are accountable for their actions. We want those who infuse mastery and passion in everything they do to create great products and unforgettable experiences for our consumers. What's in it for you? We believe that growth is for everyone; we believe in growing leaders who have an owner’s mentality. We believe in connections over hierarchies. We have a 'corporate start-up' approach; we act with speed and agility to tackle knotty business challenges. We aim to build the future ready, value driven, transparent and real time supply chain ecosystem through disruptive digital transformation. We are seeking a team member with the passion to lead the pace of change, experience to create digital solutions and entrepreneurship to deliver business results. Job Summary:The Industrial Engineer will be responsible for evaluating existing processes and systems to identify opportunities for cost savings, process enhancements, and quality improvement. The ideal candidate will optimize manufacturing efficiency, improve Overall Equipment Effectiveness (OEE), optimize the utilization of resources (assets/labor/expenses) by measuring current performance, inspire and lead Kaizen and Continuous Improvement initiatives while ensuring compliance with food safety and quality standards, and oversee the implementation of consumer activities within the factory. Key Responsibilities:SHEQ: Implement and adhere to all Lipton health, safety, food safety and environmental procedures to ensure a secure working environment for the entire team, while comprehending individual legal obligations. Demonstrate a comprehensive understanding of material handling ergonomics. Contribute to reducing environmental impacts and costs associated with utilities, chemicals, and operational wastes by optimizing eco-efficient operations. Foster a safe working environment including food safety and actively participate in the factory's hazard reporting process. Monitor product quality against established standards, promptly report any product or packaging faults, detect process abnormalities, and take emergency measures to prevent them. Proficient in conducting basic quality checks. Maintain hygienic operations throughout production. Ensure Machinery Safety and CRQS are done as per the standard frequency. Operations: Operate machinery according to instructions to achieve maximum efficiency while adhering to safety and quality standards. Ensure all process parameters are accurately set and take corrective actions to prevent deviations from product specifications. • Maintain high levels of line and machine cleanliness, adhering to standard cleaning procedures and 5S. Perform minor machine adjustments and troubleshooting. Perform machine blend and format changeovers. Engage in continuous improvement projects such as Kaizen initiatives and prioritize minimizing production losses. Undertake additional duties as required. Operates various technologies effectively. Performs on time escalations to Manufacturing Coordinator or Team Leader about Safety, Quality and Productivity non-compliance. Experience: Minimum of 2 years’ experience in a manufacturing company with high safety, quality standards and familiarity with GMP. Teabag experience (particularly Perfecta, IMA), Filling, Overwrapping, and Case packing technologies with a minimum of 1 year is an advantage. Experience working as part of a collaborative team in the manufacturing sector. Strong team player with excellent communication skills. Skills & Requirements: Flexibility to work shifts to accommodate factory operations, shutdowns, and training. Ability to adapt quickly to changes on the production line. Self-motivated with a commitment to personal and team growth. Ability to align work output with company requirements. Possess Initiative and punctuality. Basic computer proficiency. Fundamental mechanical knowledge and problem-solving skills in a factory setting. Proficiency in English (speaking, reading, and writing) and mathematics. Key Contacts: Manufacturing Manager SSHE Manager Quality Manager HR Manager Man Ex Manager Skills Trainer Operators and Technicians What we can offer you We believe that growth is for everyone, we believe in growing leaders and making space to grow an owner’s mentality and like nature we adapt, we change, and we grow. We believe in connections over hierarchies and (work) levels. We have a 'corporate start-up' approach; we act with speed and agility, and we have the strength and scale of a large corporation. We are building a better world of wellbeing and a better you.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br>Project Engineer / Project Assistant - 6 month contract assignment<br><br> <br><br>Applicants should already be located inside the UAE and be available to join at very short notice<br><br> <br><br>Work Location: Abu Dhabi, UAE (Hybrid available - for example; 3 days office, 2 days WFH or similar)<br> Duration: 6-month contract with strong potential for permanent employment based on performance and business order book.<br> Start Date: ASAP<br> Estimated Salary: AED 10K to 14K per month (full cash package) + Medical Insurance + Annual Flight Ticket (if applicable after 12 months) + Visa<br><br> <br><br>About the Role<br><br>We are seeking a Project Engineer / Project Assistant to join an experienced team supporting electrical and oil &amp; gas projects across the UAE and the wider GCC region. This role is ideal for a junior level professional with electrical background and oil and gas exposure in the UAE who is looking to develop their career within an exciting business.<br><br> <br><br>Key Responsibilities<br>Coordinate and communicate with customers and project stakeholdersPrepare and submit project documentationGenerate reports and track project progressSupport project delivery and administrative activitiesWork closely with document control teams to ensure accurate project records<br><br><br> <br><br>Requirements<br>Bachelor's Degree in Electrical Engineering2-5 years' experience (no more than 8 years total career experience) in a Project Engineer, Project Assistant, Project Coordinator, Document Controller, or junior Project Management roleExperience within the UAE oil &amp; gas sector, ideally supporting ADNOC or similar clientsSound knowledge of LV Switchgear and electrical systemsExperience working with electrical industry leaders or suppliers to the oil &amp; gas sectorUnderstanding of Middle East project execution and document control processesStrong communication and organizational skills<br><br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">electric engineering, project engineering <br> </div>

Company Description<br><br>Fairmont Hotels & Resorts <br><br>Join a dynamic team and be part of a network of 90 spectacular properties, and 34 more in the pipeline, in 30 countries around the globe. Our properties are located from the beaches of Hawaii, to the unspoiled national parks of Canada, to the heart of London, to the deserts of the United Arab Emirates.<br><br>About Fairmont Hotel Dubai<br><br>A unique blend of contemporary design and urban chic, Fairmont Dubai is an icon in the business heart of the city. Fairmont Dubai brings together luxurious surroundings and modern amenities with renowned Fairmont service.<br><br>At Fairmont, we want to bring out your highest potential. Shortly after applying, you will receive an email from our partner Assess First prompting you to create a profile and complete a questionnaire. This is a mandatory step for your candidacy to be considered as it enables us to explore your compatibility with this role and our culture of luxury excellence.<br><br>Job Description<br><br>The Housekeeping Attendant’s primary responsibility is to provide our Guest with a clean, comfortable, and properly maintained room. The Housekeeping Attendant creates memorable Guest experiences by observing guest preferences in the room. Housekeeping Attendant works closely with other colleagues and departments to ensure that the guest receives an exceptional product and service. A fantastic entry-level opportunity in a company where you can truly develop your hospitality career!<br><br>Reporting to the Housekeeping Manager, responsibilities and essential job functions include but are not limited to the following:<br><br>Ambassador of Fairmont Dubai by providing memorable Guest experiences. Responsible for the daily section assignment in cleaning Guest rooms and public areas to hotel standard. Monitor daily operating supplies of their floor pantry, including chemicals, linens, amenities and Guest room stationary items. Report for duty punctually; wearing the correct uniform as stated in the Uniform and Grooming Policy of the Hotel. Responsible for personal appearance and hygiene is to hotel standard. Attend daily briefing in Housekeeping office conducted by the Department Leaders. Ensure key control procedures and adheres to Hotel’s policies with regards to security. Report observations, requests & inquiries, and Guest concerns to Floor Supervisor or Office Coordinator. Performs other additional duties and special projects at the direction of Housekeeping Leaders. Follow Occupational Health & Safety regulations. Ensure adherence to Fairmont’s Code of Ethics.<br><br>Qualifications<br><br>Must possess outstanding Guest service skills, professional presentation and sophisticated verbal and written communication skills. Must be Guest-oriented, have a vibrant personality, possess strong initiative with observational skills & attention to details. Proficient in English language (verbal and written) with a second or third language as an asset. Must be able to handle a multitude of tasks in an intense, ever changing environment. Must be flexible in terms of working hours, and able to work with little or no supervision. Must be a strong team player with departmental cooperation <br><br>Additional Information<br><br>What Is In It For You<br><br>Company-Sponsored Medical Insurance Delicious meal breaks on duty Staff Uniforms Provided Learning programs through our Academies designed to sharpen your skills Ability to make a difference through our Corporate Social Responsibility activities Career development opportunities with national and international promotion opportunities. The sky is your limit Join our team and enjoy a range of exclusive colleague perks, including discounted rates in Accor worldwide for you and your family, special dining and wellness discounts, and added luxuries to enhance your experience. We believe in taking care of our team, ensuring that your hard work is rewarded with exceptional benefits.<br><br>Our Values <br><br>Respect<br><br>We value the needs, ideas and individuality of others. We treat everyone with fairness and dignity. <br><br>Excellence<br><br>We make genuine connections, and we cherish every opportunity to make the people around us feel special.<br><br>Belonging<br><br>We celebrate our differences. We support each other and we always stand together.<br><br>Empowerment<br><br>We have authority to take initiative and anticipate moments that create unforgettable experiences. <br><br>Integrity<br><br>We build trust through mutual respect and being authentic.<br><br>Our Commitment To Diversity & Inclusion<br><br>Fairmont is committed to creating an inclusive environment where diverse talent thrives. We welcome candidates from all backgrounds to join our team.<br><br>Why work for Accor?<br><br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br><br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS

<ul><li><p><strong>Career Level:</strong> Senior</p></li><li><p><strong>Location</strong>: Dubai, UAE</p></li><li><p><strong>Gender</strong>: FEMALE</p></li><li><p><strong>Experience</strong>: 4-10 years</p></li><li><p><strong>Monthly Salary</strong>: AED 5,000 to AED 7,000</p></li><li><p><strong>Offices</strong></p><p>a. Dubai- International City</p><p>b. Dubai - Deira</p><p>c. Sharjah - Al Majaz</p></li><li><p><strong>Products/Industries</strong>: Industrial weighing scales, measuring instruments, instrumentation & process control, industrial automation, elevators & escalators, material handling & lifting equipment, tools/meters/power tools & hardware, industrial electronics, electro-mechanical, marine, oil & gas, MEP, HVAC, IT, manufacturing machinery, packing and batching machines, commercial kitchen equipment, POS, office automation, wholesale office supplies, IT products / LV / ELV / BMS</p><br></li></ul><p><strong>Intro</strong></p><p>We are looking for an organized and responsible Admin / Administrative Assistant to support daily office operations, HR coordination, basic accounting support, supply chain support and internal follow-ups.</p><br><p><strong>Responsibilities:</strong></p><p><strong>A) Administrative Duties:</strong></p><ul><li><p>Handle daily administrative tasks, emails, records, and filing.</p></li><li><p>Assist management with schedules, reports, and follow-ups.</p></li><li><p>Monitor office supplies, petty cash, and general office requirements.</p></li><li><p>Coordinate with Sales, Operations, Warehouse, Suppliers, and Accounts when required.</p></li></ul><p><strong>B) HR Administration:</strong></p><ul><li><p>Assist in job posting, CV screening, interview scheduling, and candidate follow-up.</p></li><li><p>Maintain employee records, attendance, leave records, and HR documents.</p></li><li><p>Support onboarding, documentation, and internal HR communication.</p></li></ul><ul><li><p>Assist in job posting, CV screening, interview scheduling, and candidate follow-up.</p></li><li><p>Maintain employee records, attendance, leave records, and HR documents.</p></li><li><p>Support onboarding, documentation, and internal HR communication.</p></li></ul><p><strong>C) Accounting / Bookkeeping:</strong></p><ul><li><p>Support basic AP/AR, invoice entry, receipts, payment follow-ups, and bookkeeping.</p></li><li><p>Experience with Odoo, Zoho Books, and Zoho Inventory is an advantage.</p></li></ul><p><strong>D) Supply Chain:</strong></p><ul><li><p>Support basic supply chain tasks, including supplier follow-ups, shipment coordination, stock updates, and order status tracking.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Proven experience as a Senior Administrative Assistant, Office Administrator, or Office Coordinator is preferred.</p></li><li><p>Must be skilled and experienced in at least two of the following areas: Administrative Assistance, HR Administration, Accounting/Bookkeeping, or Supply Chain.</p></li><li><p>Strong written and verbal communication skills, with professional email drafting ability.</p></li><li><p>Proficient in MS Word, Excel, Outlook, and general office applications.</p></li><li><p>Experience with <strong>Zoho Books, Zoho Inventory, Zoho CRM, or Odoo</strong> is an advantage.</p></li><li><p>Highly organized, detail-oriented, and able to manage multiple administrative tasks with minimum supervision.</p></li><li><p>Proactive, reliable, and willing to learn new systems and procedures.</p><p><br></p></li></ol><p><strong>Additional Qualifying Advantages:</strong></p><ul><li><p>UAE driving license.</p></li><li><p>Experience in Digital Marketing or Social Media.</p></li><li><p>Engineering Degree specialized as Mechatronics Engineer will be a Plus+.</p><p><br></p></li></ul><p><strong>How to Apply:</strong></p><ol type="1"><li><p>Visit our careers page</p></li><li><p>Select the relevant job opening</p></li><li><p>Complete the application form<br></p></li></ol><p><br></p>

Job Description<br><br>Job Overview:<br><br>The Senior Structural Engineer uses best practices and knowledge of internal or external issues to improve the Structural (Eng) discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Structural (Eng) discipline. The Senior Structural Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior Structural Engineer impacts a range of customer, operational, project, or service activities with the Structural (Eng) team and other related teams and ensures that they are working within the appropriate guidelines and policies.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards Direct Engineering team as a Lead Engineer on small projects Apply knowledge and skills to a wide range of standard and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area Clearly communicate and explain complex issues and work to establish understanding Trains /mentors Engineers Assists MOPEX offices on projects Has a good understanding of the other engineering departments Initiates interface with other disciplines to obtain input for discipline designs Provide engineering support as required Perform engineering checks of drafting Perform engineering checks prepared by others within the discipline Perform design verification through single discipline check and assist with inter-discipline checks (IDC) Prepare MTOs of structures Prepare specifications Prepare subcontract documents Review of vendor data Prepare technical bid evaluations Check designs for operational requirements, constructability, and maintainability Tasks as Engineering Specialist Perform independent computer analyses of structures Prepare details and layouts of structures Prepare structural analyses and reports on calculations or perform specialist tasks (i.e. architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, center of gravity reports) Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, etc.) Is specialized in some design codes (EC, ACI/AISC/API, GOST, etc.) Prepare project engineering guides Coordinate and check the work of engineers and designers Tasks as Lead Engineer Work as Lead Engineer on small projects or act as area lead or deputy lead Responsible for all engineering and design work on small-size projects Control and manage work hours, materials, progress Work in close liaison with the Design Coordinator, area leads, etc. Coordinate with project management Assist Project Manager in:Preparing deliverable control Preparing schedule Preparing progress reports Preparing man-hour and capital expenditure estimates Fill engineering work Give relevant feedback to the department<br>Reports to:<br><br>Project: Lead Engineer/Project Engineer Manager<br><br>Functional: Supervising Department Manager<br><br>Liaises with: All Engineering disciplines, Construction site/Fabrication Group, Safety Dept, Document Control, Procurement<br><br>Group, Subcontractors and Vendors, and Customers<br><br>Supervises: Engineers and Designers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Seasoned knowledge of engineering standards and specifications Good knowledge of engineering software Able to work independently Good working knowledge of English, both oral and written HSE, TQM, and cost-conscious Good technical structural knowledge Good organizer, motivator, and supervisor Keen on improving the effectiveness of the work Show flexibility and ensure proper hand-over with regards to:The reassignment to other departments/construction sites/fabrication yards The replacement of colleagues during illness and holidays The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable The managing/learning of current working methods and software applications Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Description: Assist Tribe/Platforms and Programs/Portfolios in all organizational aspects as required.<br> This varies from supporting financial budgeting, portfolio management, resource management and being a critical point of contact for the Tribe/Platform/ Platform.<br> Level of Experience : Minimum of 5 years of total experience out of which a minimum of 3 years of Project Coordinator/Management.<br> Individuals will be aspiring to increase the size of organization they want to work in and overall responsibility of role.<br> Tasks: Supporting Active Roles within Tribe/Platform/Platform in the following: • Assisting in project Initiation: Know the complete process of initiating a project.<br> • Change Request Management: Time and Cost • Clarity CPPM Management: o Timesheet assignments and approvals.<br> o Understand project status detail update.<br> o Monitor project risks and issues.<br> • Project/Program Budget Management (Up to 10 Projects/Depending on Complexity) • Assisting the Project Managers in meeting the Quality Compliance Index standards and requirements • Ensure Tribe/Platform Artifacts are documented by the responsible roles within the Tribe/Platform and following the standardized structure (On the Advice of Delivery Lead, Scrum Master, Project Manager) • PI/PO Management • Assisting in the Project Closure Process: Know the complete process of closing a project.<br> • Maintains a repository of Measurements Matrix (Measures of success) for every project within a Tribe/Platform: o Ex.<br> Creating a sheet that allows tracking the level of completion and quality for items within projects.<br> • Updating the Tribe/Platform Structure Documents • Supporting the Tech Lead on following up on Release approvals where required OKRs and KPIs : 1.<br> Ensuring timely updates are shared with regards to Cost and Timeline of projects 2.<br> Weekly progress updates on Clarity to be met without deviation.<br> 3. Weekly Budget reconciliation 4.<br> Timely closure of projects in the project closure phase 5.<br> Assisting Scrum Masters and Project Managers to ensure TRDs are met for quality observation on a timely basis.<br> Skills: • Technical Skills: o Project Management knowledge (Waterfall and Scrum Agile) o Creation of Reports and Dashboards o Budgeting and Financial management o Required Applications to work with and to be trained on within Group IT: • Clarity CPPM • Workwise extract report • Empower for PI/PO management • AMANA (Quality Compliance) • JAGGER (SOW submission) o Required Applications to have previous experience on: • MS Excel • MS Power Point • Soft Skills: • Coordination • Stakeholder Management • Professional Communication</span> </div>