Equipment operator Jobs

<p>A construction company is hiring an experienced Boom Truck Driver to safely operate boom trucks and transport, load, and unload construction materials at project sites. The ideal candidate should have good driving skills, knowledge of vehicle safety, and experience operating boom equipment.</p> <p>Responsibilities<br /> Operate boom trucks safely and efficiently at construction sites.<br /> Transport and deliver construction materials, tools, and equipment.<br /> Load, lift, position, and unload materials using the boom mechanism.<br /> Conduct daily inspections of the truck and boom equipment.<br /> Follow approved lifting procedures and site safety regulations.<br /> Ensure loads are properly secured before transportation or lifting.<br /> Coordinate with site supervisors, riggers, and other workers.<br /> Monitor load capacity and ensure safe lifting limits are followed.<br /> Maintain accurate vehicle and equipment inspection records.<br /> Report mechanical problems, equipment damage, or safety concerns promptly.<br /> Keep the truck and work area clean and properly maintained.<br /> Follow traffic regulations and company transportation procedures.<br /> Requirements<br /> Previous experience as a Boom Truck Driver or similar heavy vehicle operator.<br /> A valid UAE Heavy Vehicle Driving License is required.<br /> Valid boom truck/crane operator certification is an advantage.<br /> Good knowledge of construction site safety procedures.<br /> Experience with lifting and handling construction materials.<br /> Strong awareness of load limits and safe operating practices.<br /> Physically fit and able to work in outdoor conditions.<br /> Reliable, punctual, and safety-conscious.<br /> UAE construction experience is preferred.</p> <p>&#x1f4f2; Interested candidates can send their updated CV via WhatsApp:<br /> +971 542852378</p>

<ul><li><p>Supervise daily deployment and utilization of plant/equipment as per site requirements</p></li><li><p>Coordinate with operators, drivers, and maintenance teams for equipment readiness</p></li><li><p>Monitor preventive maintenance schedules and coordinate breakdown repairs</p></li><li><p>Maintain equipment logs, utilization reports, and fuel/consumable records</p></li><li><p>Ensure HSE compliance and permit-to-work adherence for plant operations</p></li><li><p>Coordinate with site engineers for equipment requirements and scheduling</p></li><li><p>Liaise with rental vendors/subcontractors for additional plant/equipment</p></li><li><p>Inspect equipment condition, certifications, and load test validity (cranes, lifting gear)</p></li><li><p>Monitor operator competency, licenses, and safety compliance</p></li><li><p>Maintain documentation for equipment inspection, testing, and statutory compliance</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Electrical, Chemical) or a related technical field.</p></li><li><p>Minimum of 5 years of progressive experience in plant supervision or a similar manufacturing leadership role.</p></li><li><p>Proven track record of successfully managing production teams and driving operational excellence.</p></li><li><p>Strong understanding of manufacturing processes, quality standards (e.g., ISO), and safety protocols.<br><br></p><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in construction (not design), Pipeline / Oil & Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.<br></p><p><strong>Age Criteria:</strong></p><p>Maximum age limit is 49 years</p><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience<br></p><p><strong>Managerial and SR. Positions:</strong></p><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory<br></p><p><strong>Interview Date: </strong>Mumbai - 09th Aug 2026, Sunday, Chennai - 12th Aug 2026, Wednesday & Kochi - 16th Aug 2026, Sunday - Reporting time – 08:30 AM to 12:00 PM & 2:30 PM to 3:30 PM<br></p><p><strong>Mumbai - Mirage Hotel,</strong></p><p>Mumbai International Airport Approach Road, Near Marol Aqua Metro Stn. Andheri (East), Mumbai, Maharashtra, India – 400 059.</p><p>Waiting Hall – Amber Hall<br></p><p><strong>Chennai - The Residency Towers,</strong></p><p>115, Sir Thyagaraya Road, Chennai 600017</p><p>Waiting Hall – Senator Hall<br></p><p><strong>Kochin - Crowne Plaza Kochi,</strong></p><p>XI 641A Kundanoor Junction, NH-47 Bypass</p><p>Maradu, Ernakulam, Kerala, India, 682305</p><p>Waiting Hall – Onam Hall</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Associate Forklift Operations <p><strong>Position: Associate Forklift Operator</strong></p><br> <p>We are seeking a highly motivated and skilled Associate Forklift Operator to join our team on a full-time, permanent basis. In this role, you will be responsible for operating a forklift to move, load, and unload materials within our warehouse and distribution center. You will work closely with our warehouse team to ensure timely and accurate delivery of goods to our customers.</p><br> <p>Key Responsibilities:</p><br> <p> Operate a forklift to move, load, and unload materials within the warehouse and distribution center.</p><br> <p> Transport goods to and from storage areas, loading docks, and delivery trucks.</p><br> <p> Conduct pre-operational checks on forklift equipment and report any maintenance or safety issues.</p><br> <p> Maintain accurate inventory records and ensure proper storage and handling of materials.</p><br> <p> Adhere to all safety procedures and protocols to ensure a safe working environment.</p><br> <p> Communicate effectively with warehouse team members to ensure timely and accurate delivery of goods.</p><br> <p> Assist with general warehouse duties as needed, including packing, labeling, and organizing inventory.</p><br> <p>Qualifications:</p><br> <p> High school diploma or equivalent.</p><br> <p> Valid forklift certification and experience operating a forklift.</p><br> <p> Strong attention to detail and ability to work in a fast-paced environment.</p><br> <p> Good communication skills and ability to work effectively in a team.</p><br> <p> Physical ability to lift and move heavy objects.</p><br> <p> Knowledge of warehouse safety procedures and protocols.</p><br> <p>Benefits:</p><br> <p> Competitive salary.</p><br> <p> Full-time, permanent position with opportunities for growth and advancement.</p><br> <p> Comprehensive benefits package, including health insurance, paid time off, and retirement savings plan.</p><br> <p> On-the-job training and development opportunities.</p><br> <p> Supportive and collaborative work environment.</p><br> <br> <br> </div>

Now Hiring: 3D Printer Operator / Technician | Dubai<br>Sky High HR Solutions is inviting applications from experienced 3D Printer Operators / Technicians to support interior fit-out, joinery, and design operations.<br>The role involves producing prototypes, scale models, mock-ups, design components, and other project-specific 3D printed items while coordinating closely with Design, Technical, Production, and Project teams.<br>Key Responsibilities:• Operate and monitor 3D printers to produce prototypes, scale models, mock-ups, and design components<br>• Prepare 3D files for printing, including slicing, orientation, scaling, and support generation<br>• Coordinate with Design, Technical, Production, and Project teams to ensure outputs meet project specifications<br>• Perform post-processing activities including support removal, cleaning, finishing, and assembly<br>• Monitor print quality and troubleshoot issues such as warping, adhesion problems, layer defects, and failed prints<br>• Carry out routine cleaning, calibration, and preventive maintenance of 3D printing equipment<br>• Manage printing materials such as filaments and resins, monitor stock levels, and minimize wastage<br>• Maintain organized records of approved 3D files, print settings, machine usage, and completed models<br>• Ensure safe operation of equipment and maintain a clean and organized printing workspace<br>• Support design and technical teams in prototype development and design evaluation<br>Requirements:• Diploma or relevant technical qualification in 3D Printing, Mechanical Engineering, Product Design, Architecture, Interior Design, or a related field<br>• 2–4 years of hands-on experience operating 3D printing equipment<br>• Good understanding of 3D printing technologies, materials, and slicing software<br>• Ability to work with 3D/CAD files, dimensions, scale, and technical drawings<br>• Experience in interior design, architecture, joinery, fit-out, furniture, or engineering environments is an advantage<br>• Strong attention to detail, troubleshooting ability, and ability to work independently

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under strict supervision, works directly with both fluids and equipment supervisors and technical professionals to gain a better understanding of rig operations, company products and services, fluids, separation, and waste management technologies. Completes formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and learns to provide well site service to customers. Learns to operate, maintain and optimize Baroid equipment including testing, separation, and waste management equipment. Learns to adequately prepare and track inventory of palletized and bulk products and equipment spares at the rig site based on the drilling program and anticipated conditions. Assists with interpreting results of routine and specialized testing in order to provide technical solutions. Assists in the operation of some separation and waste management equipment and has knowledge of how such equipment affects overall fluid performance. Complies with health, safety and environment regulations in all aspects of job performance. Performs in a professional manner as a Halliburton representative with clients. Learns how to maintain good working relationships with operator&amp;aposs representative and rig personnel. No previous work experience is required. Completion of a Bachelor&amp;aposs Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor&amp;aposs Degree program is required. This is an entry level position.<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>MN4 Corniche Road, Mussafah,&nbsp;Abu Dhabi,&nbsp;Abu Dhabi,&nbsp;, United Arab Emirates</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210424&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Baroid&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<ul><li><p>Follow the SOP, Quality and HSE Guidelines of designated Machinery to achieve optimum result, Product safety and safe usage of machinery and personnel safety. Follow the cleaning and caring of the machinery designated to the Operator and report any breakdown and loss of productivity to Maintenance Technicians and Production Supervisor in appropriate Breakdown reports. Do not allow unauthorized usage of designated machinery to avoid damage to machine, product safety and personnel safety. Achieve production plan within the specified time with a commitment to quality instruction in the production process. Comply with all the instructions to the inner workings of the production department during client productivity. Commitment to public safety instructions on production lines and facilities. Follow up the implementation of all production work on the production line in accordance with the production plan contained. Follow the rules of quality and food safety; the public followed the instructions and quality control (QC in the production process). Receive raw materials from the warehouse/ Process steps and follow signals and instructions, follow up the development of these materials and arrange them properly and as directed by the production Supervisor/ Process flow.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>A minimum of 1 years of progressive experience in a manufacturing or industrial setting, with a focus on machine operation and maintenance.</p></li><li><p>Proven experience with PLC programming and troubleshooting, along with proficiency in diagnostic software.</p></li><li><p>Certification in relevant areas such as industrial maintenance, electrical safety, or specific machinery operation.</p></li></ul>

<p>A construction company is hiring an experienced Boom Truck Driver to safely operate boom trucks and transport, load, and unload construction materials at project sites. The ideal candidate should have good driving skills, knowledge of vehicle safety, and experience operating boom equipment.</p> <p>Responsibilities<br /> Operate boom trucks safely and efficiently at construction sites.<br /> Transport and deliver construction materials, tools, and equipment.<br /> Load, lift, position, and unload materials using the boom mechanism.<br /> Conduct daily inspections of the truck and boom equipment.<br /> Follow approved lifting procedures and site safety regulations.<br /> Ensure loads are properly secured before transportation or lifting.<br /> Coordinate with site supervisors, riggers, and other workers.<br /> Monitor load capacity and ensure safe lifting limits are followed.<br /> Maintain accurate vehicle and equipment inspection records.<br /> Report mechanical problems, equipment damage, or safety concerns promptly.<br /> Keep the truck and work area clean and properly maintained.<br /> Follow traffic regulations and company transportation procedures.<br /> Requirements<br /> Previous experience as a Boom Truck Driver or similar heavy vehicle operator.<br /> A valid UAE Heavy Vehicle Driving License is required.<br /> Valid boom truck/crane operator certification is an advantage.<br /> Good knowledge of construction site safety procedures.<br /> Experience with lifting and handling construction materials.<br /> Strong awareness of load limits and safe operating practices.<br /> Physically fit and able to work in outdoor conditions.<br /> Reliable, punctual, and safety-conscious.<br /> UAE construction experience is preferred.</p> <p>&#x1f4f2; Interested candidates can send their updated CV via WhatsApp:<br /> +971 542852378</p>

<p>We are looking for a qualified and experienced Rigger Level 3 to join our team in the UAE.</p> <p>Responsibilities:</p> <p>Perform advanced rigging operations safely and efficiently.<br /> Inspect, select, and maintain rigging equipment before use.<br /> Plan and execute lifting activities in coordination with crane operators and lifting supervisors.<br /> Ensure all lifting operations comply with safety regulations and company procedures.<br /> Identify potential hazards and implement appropriate control measures.<br /> Maintain accurate records of rigging equipment inspections and lifting activities.</p> <p>Applicants may send cv via WhatsApp number 0542852378</p>

<p>We are looking for a qualified and experienced Rigger Level 3 to join our team in the UAE.</p> <p>Responsibilities:</p> <p>Perform advanced rigging operations safely and efficiently.<br /> Inspect, select, and maintain rigging equipment before use.<br /> Plan and execute lifting activities in coordination with crane operators and lifting supervisors.<br /> Ensure all lifting operations comply with safety regulations and company procedures.<br /> Identify potential hazards and implement appropriate control measures.<br /> Maintain accurate records of rigging equipment inspections and lifting activities.</p> <p>Applicants may send cv via WhatsApp number 0542852378</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate dry bulk trucks; pump material from tankers using a compressor; and operate vehicles/equipment between the Grinding Plant and Port Services/Jetty, including tractor, wheel loader, and forklift, based on operational requirements. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>At least High School Diploma</p></li><li><p>Valid heavy-duty driving license issued by the local authority, including tractor, heavy truck, and wheel loader</p></li><li><p>Minimum 5 years of relevant experience</p></li><li><p>Basic knowledge of first-line maintenance; experienced port equipment operators or truck drivers must be able to perform first-line maintenance</p></li><li><p>Heavy Tractor/Heavy Equipment Driving License- is a must</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>Execute Melter Duties and Maintain Furnace Equipment:</strong></p></li></ul><p>Perform manual tasks assigned by the supervisor to ensure the smooth operation of the EAF/LRF according to production schedules and requirements. This includes changing electrodes, preparing and adding materials carbon, Aluminium or ferro alloys manually into the furnace, and maintaining ladle equipment for molten steel transfer.</p><ul><li><p><strong>Lifting Operations, Rigging, and Slinging:</strong></p></li></ul><p>Rig and sling materials such as electrodes, furnace parts, and ladles in accordance with safe rigging practices to ensure secure and stable loads during lifting. Collaborate with crane operators to accurately and safely move material, pallet and heavy items, ensuring compliance with lifting capacity and safety standards.</p><ul><li><p><strong>Signalman Duties for Safe Lifting Operations:</strong></p></li></ul><p>Act as a signalman during lifting and rigging operations to guide crane operators, ensuring proper alignment and safe handling of equipment and materials. Use appropriate hand signals, communication devices, and standard procedures to direct lifting operations, ensuring clear and effective communication with the crane</p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Education Qualifications (Must Haves)</p></li><li><p>Around 3 Years with a steel plant having an EAF/LF/CCM production route with DRI</p></li><li><p>Around 3-5 Years in a Steel Plant as a Melter</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong><u>Project Position: Senior Supervisor - Commissioning-Mechanical</u></strong></span></p><br><p><span><strong><u>Primary Duties</u></strong></span></p><br><p><span><span>Ensures that all commissioning activities are completed in a safe, efficient and cost effective manner.</span></span></p><br><p><span><span>Provides day to day support to Commissioning Engineer/Commissioning Coordinator.</span></span></p><br><p><span><span>Setting up technical teams and monitoring progress to schedule.</span></span></p><br><p><span><span>Confirms/arranges suitable PPE is available to all personnel under him.</span></span></p><br><p><span><span>Arranges PTW, Tool Box talks are completed in line with HSE requirements prior work start.</span></span></p><br><p><span><span>Be continually present on the field to guarantee the quality and progress of the work.</span></span></p><br><p><span><span>Ability to lead a team of technicians/operators/ sub-contractor and safely execute the work.</span></span></p><br><p><span><span>Analyse team performance against schedule and report/advise any changes required to maintain progress to line management.</span></span></p><br><p><span><span>Monitor availability of personnel to complete planned workloads.</span></span></p><br><p><span><span>Liaise with other disciplines to ensure work fronts are available as required.</span></span></p><br><p><span><span>Ensure transport is available for site teams.</span></span></p><br><p><span><span>Look at initiatives to improve the work within pre-commissioning and commissioning.</span></span></p><br><p><span><span>Prepare all testing dossiers along with proper document to safely execute the work (Drawings, procedures, etc…)</span></span></p><br><p><span><span>Keep technically updated through the study of related technical literature including procedures and guidelines.</span></span></p><br><p><span><span>Ensure correct tool packages are available along with detailed comprehensive commissioning procedures for individual jobs.</span></span></p><br><p><span><span>Review spares, spare usage against plan.</span></span></p><br><p><span>Investigate causes of defective operation of systems and equipment including interfaces to other systems and suggest modifications to equipment or operational conditions.</span></p><br><p><span>Ensure that commissioning procedures are adhered to and complete all necessary documentation to facilitate work and up-date records.</span></p><br><p><span>Ensure full compliance to company Fire &amp; safety &amp; Environment procedures/standards in all executed work-tasks and actively contributes to sections HSE.</span></p><br><p><span>Identify potential HSSE risks (related to commissioning) and take appropriate steps to mitigate it.</span></p><br><p><span>Ensure commissioning area is controlled, all energized systems clearly marked and barricaded off. Access control in place, SIMOPS carefully assessed and controlled.</span></p><br><p><span>Give inputs to concern so as to ensure minimum standby time for vendor representative and avoid their revisits.</span></p><br><p><span>Accurate interpretation and understanding of P&amp;IDs, process flow diagrams, circuit diagrams and control narratives; no rework or time lost due to incorrect interpretation.</span></p><br><p><span><span>Review spares part usage against plan</span></span></p><br><p><span><span>Perform any other related duties and responsibilities as and when directed by Supervisor.</span></span></p><br><p><span><b><strong><u>Mechanical:</u></strong></b></span></p><br><span><span>Ability to execute mechanical commissioning activities and guide Technicians during work execution</span></span><span><span>Ability to monitor and maintain rotating equipment in healthy condition (vibration, lubrication level, mechanical seal, gland packing, bearings, etc.).</span></span><span><span>Ability to prepare rotating equipment for first start-up and ensure readiness for operation (removal of shipping locks, lubricating oil, alignment, packing installation, greasing, strainers installation, etc.).</span></span><span><span>Ability to guide in preservation and maintenance of rotating equipment after equipment commissioning and start-up.</span></span><span><span>Ability to assist in performing various activities related to rotating equipment likes lube oil flushing, alignment, lubrication, vibration checks, start-up etc.</span></span><span><span>Ability to assist in performing various activities related to static equipment likes proper installation of internals inside the vessels as per drawing &amp; specifications.</span></span><span><span>Ability to assist in performing various activities such as mechanical interlock, pipeline pigging activities, spring support hot</span><span>&amp; cold setting, overhead crane functional and load testing, etc.</span></span><span><span>Ability to assist in performing air blowing, flushing, leak testing, flange management, drying &amp; inerting of various piping.</span></span><span><span>Ability of application of appropriate codes and standards for valve testing/repairs such as: API, ASME, NBBI, ISO, BS, ANSI etc.</span></span> Additional Information <br> <br> <br> </div>

<p><strong>Job Description:</strong></p><ul><li>Monitor material coordination between production, design and sales department</li><li>Prepare and submit Material and Sample Submittals in coordination with projects manager</li><li>Knowledge in health and safety guidelines related to interior fit out project management</li><li>Coordination between design, estimation and sales team for given projects</li><li>Analyse projects requirements and plan Manpower, materials as per given BOQ from estimation department in coordination with store team and purchaser</li><li>Prepare method statements and work specific quality control plans, ensuring that delivered materials are in accordance with quantity and quality, monitor and control materials release in coordination with store team</li><li>Maintain records of the transfer slips with any quality issues arise over the production course.</li><li>Identifies operational problems by observing and studying system function and performance results; investigating complaints and suggestions</li><li>Develop working instructions, workmanship standards and process documents, to ensure that they are followed and ensure a strict adherence to the production schedule</li><li>Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance time, and costs</li><li>Improve and Develops continually existing operation to improve quality, productivity, efficiency and cost savings and determining impact on total system</li><li>Manage manufacturing documentation required for product manufacturing</li><li>Identify ways to reduce production costs through recommendations – i.e. new process equipment, equipment justification to improve performance</li><li>Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.</li><li>Train and supervise staff on new developed processes and technologies, establish a training and quality culture</li><li>Verify, coordinate and participate (as needed) in site surveys before proceeding with production to validate the project drawings</li><li>Accomplishes engineering and organization mission by completing related results as needed by (Operations Research, Safety Management, Reporting Skills, Manufacturing Control Planning, Manufacturing Methods and Procedures, Manufacturing Quality, Supply Management, Analysing Information, Technical Understanding, Innovation, Quality Focus)</li><li>Deliver significant and quantifiable process improvement and financial benefit across the organization on assigned projects</li><li>Establish strong, effective and collaborative relationships with team leaders</li><li>Arrange production force into balanced groups and distribute jobs in between, maintaining proper coordination and integration</li><li>Responsibility for work execution, monitoring and supervision</li></ul><p><strong>Qualifications, Skills and Prior Work Experience:</strong></p><ul><li>Knowledge in AutoCAD (2D and 3D Modelling), Google SketchUp Software to determine Bill of Materials (BOM).</li><li>Could operate effectively with Microsoft Office Software</li><li>Efficient Management and Organizational skills, with efficient oral and written communication skills in English.</li><li>Have good problem-solving skills, analytic thinking and technical approach, open minded to work in complex environment and projects.</li><li>Degree in architectural or civil engineering</li><li>Supervisory management</li><li>Experience in projects management with minimum 4 years’ experience as projects engineer</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are a CPO (Charge Point Operator) company providing EV charging stations infrastructure, looking for a part-time Accountant based in Dubai to join our Team.</p><p><br></p><p><b>Requirements:</b></p><p><br></p><ul><li>5+ years of accounting experience</li><li>Strong knowledge of UAE accounting laws and regulations</li><li>Fluent in English and Russian <b><i>(both required)</i></b></li><li>Available on a flexible schedule, 10-20 hours per week</li></ul><p><br></p><p><b>What we offer:</b></p><p><br></p><ul><li>Flexible, part-time schedule</li><li>Remote or hybrid work possible</li><li>Competitive compensation based on experience</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Solid understanding of UAE VAT and corporate tax regulations</li><li>Experience with bookkeeping, financial statements, and reconciliations</li><li>Familiarity with UAE labor law and compliance requirements (WPS, gratuity, etc.)</li><li>Proficiency with accounting software (e.g.,Zoho Books)</li><li>Strong attention to detail and organizational skills</li><li>Ability to work independently and manage deadlines with a flexible schedule</li><li>Good communication skills in English and Russian</li><li>Prior experience working with businesses/clients in the UAE market is a plus</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><ul> <li>The Production Manager leads a dedicated team of operators and technicians to maximize flour heat-treatment throughput and plant efficiency while enforcing strict food safety and hygiene protocols. This role drives operational excellence by maintaining GMP compliance, ensuring audit-ready documentation, and directing preventive plant maintenance to minimize downtime. By personally mentoring staff and utilizing root-cause analysis to eliminate processing failures, the manager secures a highly skilled workforce and a continuous, defect-free production cycle.</li> </ul><br><br>Roles &amp; Responsibilities <br><ul> <li>Operate FHT production line and lead production KPIs. Ensure optimum and cost-effective operations of the plant or packing section.</li> <li>Mobilize HSE agenda in daily operations, regularly participate in safety walks, and take relevant safety actions. Ensure safety, HSE compliance, and implement internal controls for documented processes.</li> <li>Assist in scope-based and need-based packaging development through relevant trials and specs development in each category of the Agri Food business group.</li> <li>Adhere to production plans and schedules, focus on packaging constraints, and support line manager in managing operations scheduling.</li> <li>Execute efficiency management through OEE (Overall Equipment Efficiency), TPM (Total Productivity Management), and champion section 5S activities.</li> <li>Partner with BU HR for manning-related matters, monitor headcounts and relevant issues, lead operator's training, and ensure accurate training w.r.t JDs (Job Descriptions).</li> <li>Ensure best utilization of available assets with target OEE, operate at minimum HC levels, and support manufacturing manager on new projects and implementations.</li> <li>Implement and practice basics of TPM, including Kaizens, and ensure controls on all changes management.</li> <li>Record production and batch data in Oracle, ensure timely cycle counts, accuracy, material usage variances, CC (Cycle Count) coverage, and wastage control.</li> <li>Understand, reflect, and practice IFFCO’s vision and values.</li> </ul><br><br>KPIs <br><ul> <li>Material/equipment efficiency.</li> <li>Budgeted production volumes vs actual.</li> <li>In process cost of rejection/wastages</li> <li>FG inventory levels</li> <li>Compliance all Audits</li> </ul> <br><br>Work experience requirement <br><ul> <li>6-10 years of experience in managing FMCG production</li> </ul><br><br>Qualification <br><ul> <li>B.E. / B. Tech. Food Technology (Diary or Mechanical)</li> <li>Hands-on experience on Packaging machines and high-speed lines is an added advantage</li> <li>Certified TPM practitioner and have fair idea of end of line automations</li> </ul><br><br>Competencies <br>Production Planning<br>Safety Procedures and Norms<br>Quality Management<br>Cost Management<br>Industry Regulations and Norms<br>Communicating effectively<br>Self and Team Management<br>Planning &amp; Decision Making<br>Customer Centricity<br>Ownership &amp; Result Orientation<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Select the correct crane and accessories for the specific task<br>• Prepare the lift plan and ensure the required controls are in place<br>• Ensure that the lifting equipment is maintained, examined and appropriate for use<br>• Check that load integrity and stability are satisfactory<br>• Ensure that people involved are competent for performing their task, aware of the task and procedures to be followed,<br>and aware of their responsibilities<br>• Ensure competent supervisor available should the Appointed Person delegate his duties of part thereof to others<br>• Ensure all necessary test certificates and other documents are available<br>• Ensure all other statutory requirements and any necessary work permits are in place<br>• Identify all hazards and restricted areas<br>• Ensure that the person directing crane movements (Signaler / Banksman) is readily identifiable to the crane operator<br>by wearing high visibility clothing or distinguishing markings<br>• Ensure that the workplace is provided with adequate lighting for night lifting<br>• Brief people involved in or affected by the lift<br>• Ensure the lift is carried out following the plan. Suspend the lift if changes or conditions (e.g. wind) occur that would<br>cause a deviation from the plan<br>• Monitor the performance of all involved personnel to ensure that adequate standards of performance are maintained<br>• Manage any special issues such as language barriers and new/inexperienced staff<br>• Check that there is no deviation from standards for routine lifts<br>• Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, e.g., helicopter<br>operations, ballast control, other cranes</p><br><br>Responsibilities:<br><p>• Select the correct crane and accessories for the specific task<br>• Prepare the lift plan and ensure the required controls are in place<br>• Ensure that the lifting equipment is maintained, examined and appropriate for use<br>• Check that load integrity and stability are satisfactory<br>• Ensure that people involved are competent for performing their task, aware of the task and procedures to be followed,<br>and aware of their responsibilities<br>• Ensure competent supervisor available should the Appointed Person delegate his duties of part thereof to others<br>• Ensure all necessary test certificates and other documents are available<br>• Ensure all other statutory requirements and any necessary work permits are in place<br>• Identify all hazards and restricted areas<br>• Ensure that the person directing crane movements (Signaler / Banksman) is readily identifiable to the crane operator<br>by wearing high visibility clothing or distinguishing markings<br>• Ensure that the workplace is provided with adequate lighting for night lifting<br>• Brief people involved in or affected by the lift<br>• Ensure the lift is carried out following the plan. Suspend the lift if changes or conditions (e.g. wind) occur that would<br>cause a deviation from the plan<br>• Monitor the performance of all involved personnel to ensure that adequate standards of performance are maintained<br>• Manage any special issues such as language barriers and new/inexperienced staff<br>• Check that there is no deviation from standards for routine lifts<br>• Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, e.g., helicopter<br>operations, ballast control, other cranes</p><br><br>Qualifications:<br><p>1. 3 years Diploma in Mechanical Engineering or equivalent<br>2. 4-days Appointed Person Course by an ADNOC Offshore<br>Approved Training Provider is an added value<br>3. Minimum 5 years’ experience of offshore and onshore<br>lifting operations in a similar role in oil &amp; gas industry<br>&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under general supervision, coordinates and oversees cementing service line work at the well site handling the more complex, hazardous, and/or high profile jobs while providing quality service to the customer. Job role may include sales, job design, execution, and follow up activities. Cross trains and active participates in one or more product service lines. Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels. Ensures customer satisfaction with work performed. Coordinates and directs the activities of service operators. Coordinates the clean up, repair, and preparation of equipment for the next job. Plans and performs necessary calculations for the total job at the well site as needed. Leads the site crew comprised of Halliburton and/or non-Halliburton employees. Evaluates individual performance levels of the crew and trains operators to improve their job performance. Job role has budgetary type of accountabilities or directly impacts a revenue center&amp;aposs viability or its quality of service via personal contributions. Skills are typically acquired through a high school diploma, or similar education and 2 years of experience as Service Supervisor-Cementing, II. Licensure to drive commercial equipment may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the Quality Improvement Process. Must meet the minimum developmental standards for this job classification. Demonstrates proficiency in the operation and maintenance of each type of equipment/unit/tool normally used in the product service line. Has exceptional skills within the service line and specific knowledge and understanding of other service functions.<br><br><b>Qualifications</b> <br><br><br><p><b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p><br> <p><b><u>Location</u></b></p><br> <p>MN4 Corniche Road, Mussafah,&nbsp;Abu Dhabi,&nbsp;Abu Dhabi,&nbsp;, United Arab Emirates</p><br> <p><b><u>Job Details</u></b></p><br> <p><b>Requisition Number:</b>&nbsp;210254&nbsp;&nbsp;<br> <b>Experience Level:&nbsp;</b>Experienced Hire&nbsp;<br> <b>Job Family:</b>&nbsp;Operations&nbsp;<br> <b>Product Service Line:&nbsp;</b>Cementing&nbsp;&nbsp;&nbsp;<br> <b>Full Time / Part Time:&nbsp;</b>Full Time</p><br> <p><b>Additional Locations for this position:&nbsp;</b></p><br> <p><u><b>Compensation Information</b></u><br> Compensation is competitive and commensurate with experience.</p><br> </div>

<p>A respected company is looking for a Data Entry Operator to maintain accurate records, update databases, process information, and support daily administrative operations. The ideal candidate should have good computer skills, strong attention to detail, and the ability to work accurately within deadlines.</p> <p>Key Responsibilities<br /> Enter and update information accurately into databases and company systems.<br /> Maintain digital and physical records in an organized manner.<br /> Verify data for accuracy, completeness, and consistency.<br /> Review documents and identify missing or incorrect information.<br /> Process forms, reports, invoices, and other business documents.<br /> Perform data checking, correction, and regular record updates.<br /> Retrieve and provide information when required.<br /> Maintain confidentiality of company and customer information.<br /> Prepare basic reports and spreadsheets using MS Excel.<br /> Coordinate with relevant departments to clarify or verify information.<br /> Complete assigned data entry tasks within required deadlines.<br /> Follow company procedures for document handling and data management.</p> <p>Ready to take the next step in your career? Share your updated CV via WhatsApp: +971582297907 or email navyaverma.hr@gmail.com</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.&nbsp;</span></p><br><br><br><p><span>As&nbsp;<strong>Test Engineer – PCBA</strong>, you set-up, validate, maintain and improve PCBA test procedure in production and ensure technical support in production for Failed PCBAs (or FGs) diagnosis after ICT/Flying probe/functional test, to secure EATON production quality standards and constantly improve customer satisfatction. This role ensures PCBA EATON quality compliance for repaired PCBA for New Product Introduction, Transfered PCBA from other EATON plants or EMS, and ensure robust and stable PCBA testing and repairing processes definition, compliant with industry standards, supporting product quality, and operational excellence, in line with EATON Safety rules.</span></p><br><br><br><p><span>The Test Engineer – PCBA will design PCBA/FG test procedure and Work Instructions in production, interacts with Manufacturing Test development team during design phases (manufacturability of PCBA &amp; FG), by supporting Industrialization Program Manager, trackz defect rate at FCT/ICT Test process steps during Pre-series and in production, via Pareto analysis, define, manage and realize Testers and Test fixtures maintenance activities, defines repair processs for failed PCBA/FG to be applied in production and suggests CI and VAVE projects for productivity improvement. </span></p><br><br><br>What you’ll do: <br><ul><li><span>Develop, deliver and maintain Operators and Maintenance work instruction and plan, for PCBA &amp; FG electronic test equipment processes (ICT, Flying Probe, Functional tests).</span></li><li><span>Manage and realize maintenance activities level 2 &amp; 3 (preventives maintenance and internal-external equipment calibrations).</span></li><li><span>Support Industrialization program manager in ProLaunch Manufacturing delivrables release: Process flow Chart, PFMEA, PPAP, etc.., with Manufacturing Test development engineering team.</span></li><li><span>Support Industrialization program manager to influence PCB/PCBA design through DFM reviews, with R&amp;D</span></li><li><span>Ensure PCBA test instruction and maintenance plan linked to ECO/MCO in due time.</span></li><li><span>Track and improve PCBA/FGs Test related cycle times for each PCBA SKU, and Update related RCCP data with production manager</span></li><li><span>Support customer audit and Plant quality certification programs at Test processes Level (ICT/Flying Probe Functional and other electronic test steps).</span></li><li><span>Support Manufacturing Test development team in new test solutions implementation in production: MSA tests, cycle time confirmation, maintenance plan definition, operator work instruction: change over and production operations, etc...</span></li><li><span>Support component &amp; Product engineer in SAP and MES setUp for PCBA/FGs test operation data establishment.</span></li><li><span>Analyse OEE of testers in production per SKU and define Continuous Improvement plan for Electronic Testing area.</span></li><li><span>Track maintenance indicators to improve Test area performance: MTBF, MTTR</span></li><li><span>Act as technical interlocutor for other EATON plant and EMS , for test in production shopfloor</span></li><li><span>Define CAPEX needs for PP, to improve productivity in production test area (ROI)</span></li><li><span>Support Production Continuous Improvement initiatives, SMED, Kaizen events, RIE, VSM</span></li><li><span>Act as production test process expert for quality crisis root cause analysis , and action plan definition.</span></li></ul><br>Qualifications: <br><ul><li><span>Bachelor’s Degree in Electronics/Mechanical/Industrial Engineering.</span></li><li><span>5+ years of experience in PCBA manufacturing test in production. Strong knowledge on PCBA manufacturing processes is a plus.</span><br></li></ul><br>Skills: <br><ul><li><span>Demonstrating in Lean Manufacturing or continuous improvement methodologies.</span></li><li><span>Production support and trouble shooting in test area&nbsp;</span></li><li><span>Significative experience in Test operation in production, including maintenance is required (Flying probe programing on Takaya, functional testing).</span></li><li><span>Expert in Test processes and equipments in production.</span></li><li><span>Electronic PCBA defect root cause analysis capability (CI tools application)</span></li><li><span>Solid understanding on PCBA manufacturing processes.</span></li><li><span>Programation of flying Probe equipment (i.e. Takaya flying Probe).</span></li><li><span>IPC-A610 Class3 strong knowledge and application (Certification is a strong advantage)</span></li><li><span>Knowledge of ESD safety procedures and quality control practices.</span></li><li><span>Maintenance plan creation and realization experience in test equipment.</span></li><li><span>Good communication with pedagogic skills and spirit of synthesis.</span></li><li><span>High attention to detail and documentation accuracy.</span></li><li><span>Ability to work with multiple plant stakeholders, R&amp;D engineers, and strongly support continuous improvement initiatives.</span></li><li><span>Safety oriented in operations, in line with EATON MESH and operational activities.</span></li></ul><br>What we offer you: <br><ul><li><span>Being part of a company that has been in business for more than 100 years, is well known in the industry, and has a major impact on the energy industry</span></li><li><span>Work in a company that is commitment to Inclusion &amp; Diversity and Sustainability</span></li><li><span>Annual mentoring program, Eaton University, a reward, and recognition system</span></li><li><span>Ongoing Learning and Career Development Opportunities in a global company. Build your career and apply internally for our open positions worldwide</span></li><li><span>Strong, agile and diverse team locally and globally</span></li><li><span>Strong processes and state-of-the-art systems and tools</span></li><li><span>Structured employee development processes, open feedback culture with development plans</span></li><li><span>Detailed induction support and well-structured onboarding</span></li><li><span>Balance your work and life with a hybrid worktime model</span></li></ul><br><p><span><strong>Living and Working in Dubai</strong></span></p><br><br><br><p><span>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.</span></p><br><br><p><span>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.</span></p><br><br><p><span>#LI-NY1</span></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.Identifies and reports any abnormalities. Repairs and /or replaces required items and re-assembles and tests the equipment, leaving the working area clean.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Monitors any repeated breakdown and recommends proper modification to resolve the problem.Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.Performs other related duties as communicated by Supervisor/Superior.Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Diploma in relevant field. Completion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after Diploma No experience required after completion of PEC Training Skills: A good knowledge of written and spoken English Must be familiar with all maintenance tools and should have good IT knowledge Experience in installation &amp; troubleshooting Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul><p></p></section>