Financial Analyst Jobs in UAE

<ul><li><p>Supervise all lifting and rigging activities at the project/site.</p></li><li><p>Ensure lifting operations are carried out as per approved <strong>lifting plans and risk assessments</strong>.</p></li><li><p>Coordinate with riggers, crane operators, lifting equipment operators, and site supervisors.</p></li><li><p>Inspect lifting gears, accessories, and equipment before use and ensure valid inspection certificates are available.</p></li><li><p>Ensure proper selection and safe use of slings, shackles, spreader beams, lifting beams, and other lifting accessories.</p></li><li><p>Check load weight, lifting points, center of gravity, and lifting arrangements before commencing operations.</p></li><li><p>Establish and maintain safe lifting zones and ensure unauthorized personnel are kept away from lifting areas.</p></li><li><p>Guide and supervise rigging teams during critical and routine lifting operations.</p></li><li><p>Stop any unsafe lifting activity and immediately report hazards or unsafe practices.</p></li><li><p>Coordinate with the HSE team to ensure compliance with safety procedures.</p></li><li><p>Conduct toolbox talks and lifting-related safety briefings.</p></li><li><p>Maintain lifting records, inspection checklists, and other required documentation.</p></li><li><p>Report incidents, near misses, equipment defects, and unsafe conditions to the concerned</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or relevant technical qualification is preferred.</p></li><li><p><strong>4+ years of experience in lifting and rigging operations</strong>, preferably in <strong>tank fabrication, EPC, oil & gas, or heavy industrial projects</strong>.</p></li><li><p>Strong knowledge of lifting and rigging practices and lifting equipment.</p></li><li><p>Good knowledge of lifting plans, risk assessments, and method statements.</p></li><li><p>Experience supervising crane, rigging, and heavy lifting activities.</p></li><li><p>Valid UAE lifting-related certification/competency certification is preferred.</p></li><li><p>Ability to read and understand lifting plans and technical drawings.</p><br></li></ul>

Candidates with a Bachelors degree in Petroleum Engineering with more than 10 years of experience in reservoir engineering experience in the Oil & Gas industry. Experience in reservoir performance evaluation, reserves estimation, production forecasting, and reservoir simulation. Strong knowledge of history matching, Field Development Plans (FDPs), Enhanced Oil Recovery (EOR), and hydrocarbon recovery optimization. Hands-on experience with carbonate reservoirs and compositional reservoir modeling is mandatory. Experience in production optimization, reservoir surveillance, and supporting exploration and development activities. Exposure to technical bid evaluations, contractor management, and reservoir engineering studies is an advantage.<br>Salary: AED 25,000 + Family Accommodation

<ul><li><p>Monitor real-time production processes, identifying and resolving immediate operational issues to minimize downtime and maintain smooth production operations.</p></li><li><p>Perform routine equipment inspections and preventive maintenance to ensure optimal performance, reduce breakdowns, and extend equipment lifespan.</p></li><li><p>Collaborate with senior engineers to troubleshoot complex technical problems and contribute to effective corrective and preventive solutions.</p></li><li><p>Assist in optimizing production workflows to improve efficiency, productivity, and waste reduction.</p></li><li><p>Support production planning by coordinating with relevant teams to ensure production targets, schedules, and resource requirements are effectively managed.</p></li><li><p>Monitor production progress against planned schedules and highlight deviations or potential delays to the concerned teams.</p></li><li><p>Prepare daily, weekly, and monthly production reports, including production output, downtime, equipment performance, efficiency, and operational issues.</p></li><li><p>Maintain accurate production and maintenance records and assist in analyzing data to identify opportunities for continuous improvement.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.</p></li><li><p>Strong understanding of manufacturing processes, production systems, and basic maintenance practices.</p></li><li><p>Good knowledge of production planning, scheduling, and workflow optimization.</p></li><li><p>Relevant internship, industrial training, or academic projects demonstrating practical engineering experience.</p></li><li><p>Strong analytical and problem-solving skills with the ability to troubleshoot operational and technical issues.</p></li><li><p>Ability to work effectively with senior engineers, production teams, maintenance personnel, and other cross-functional teams.</p></li><li><p>Good reporting, documentation, communication, and organizational skills.</p></li><li><p>Proficiency in Microsoft Excel and other reporting or production-management tools is an advantage.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Subject:</strong> Urgent Hiring | Senior QAQC Engineer - Mechanical | UAE<br> <br> Hi,<br> <br> Greetings from NES Fircroft!<br> <br> We are currently hiring a <strong>Senior QAQC Engineer - Mechanical</strong> for a leading client in <strong>Jebel Ali/Hamriyah, UAE</strong> on a permanent basis.<br> <br> <strong>Key Requirements:</strong><ul><li>Bachelor's Degree in Mechanical Engineering</li><li>Minimum 10 years of QA/QC experience in Modular Technical Buildings, preferably within Oil &amp; Gas</li><li>Strong knowledge of QA/QC planning, welding inspection, NDT, material traceability, hydrotesting, ITPs, and quality compliance</li><li>Experience with ADNOC and other major Oil &amp; Gas clients</li><li>Certifications required:<ul><li>BGAS</li><li>AWS SCWI</li><li>CSWIP 3.2</li><li>ASNT NDT Level III</li></ul></li><li><strong>Valid UAE Driving License and personal vehicle required</strong></li></ul><strong>Please share your updated CV along with:</strong><ul><li>Date of Birth</li><li>Nationality</li><li>Current Location</li><li>Notice Period</li><li>Current &amp; Expected Salary</li><li>Contact Number &amp; Email ID</li></ul><strong>Apply Now:</strong><br> akshaya.khot@nesfircroft.com<br> <br> We look forward to hearing from you.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><strong><span>Job Role:</span></strong></span> </span><p>The Assistant Supervisor supports the safe, efficient and cGMP-compliant operation of pharmaceutical packaging lines. The role coordinates packaging employees, ensures line clearance, setup, documentation and material reconciliation are completed correctly, monitors hourly output, and promptly reports deviations or technical issues to the appropriate supervisor.</p><br> <span><span><strong>Detailed Job Responsibilities:</strong></span></span> <ul> <li>Adhere to cGMP principles and maintain them effectively.</li> <li>Follow the gowning procedure as defined in the applicable SOP.</li> <li>Ensure team adherence to EMS and HSE requirements through monitoring, training and guidance.</li> <li>Lead incident investigations, root-cause analysis and implementation of corrective and preventive actions.</li> <li>Drive departmental initiatives to improve environmental performance and strengthen the HSE culture.</li> <li>Organize the packaging line in accordance with standard operating procedures.</li> <li>Check that area equipment and tools are clean before packaging begins.</li> <li>Distribute work to packaging employees and ensure compliance with SOPs and cGMP requirements.</li> <li>Participate in line-clearance activities.</li> <li>Perform line setup, line startup, reconciliations and material destruction, and complete all required documentation according to approved procedures.</li> <li>Complete the batch documentation for the assigned shift.</li> <li>Report mistakes or technical faults to the Team Leader or Specialist.</li> <li>Monitor hourly line capacity and support maximum line efficiency.</li> <li>Report deviations to the Specialist or Team Leader.</li> <li>Perform any additional responsibilities assigned by management.</li> </ul> <span><span><strong>Qualifications and Functional Knowledge</strong></span></span> <ul> <li>Minimum Higher Secondary School qualification.</li> <li>At least 3 years of experience in the pharmaceutical industry.</li> <li>Proficient in reading, writing and speaking English.</li> </ul> </div>

WE ARE HIRING | ARCHITECTURAL TEAM<br>We are looking for experienced Project Architects and Senior Architects to join our team.<br>???? Project Architect???? Abu Dhabi / Al Ain | 2 Vacancies | 10+ Years’ Experience<br>???? Senior Architect???? Al Ain | 2 Vacancies | 3–8 Years’ Experience<br>Key Requirements:• Strong consultant-side architectural experience.• Consultant experience within the Emirate of Abu Dhabi is mandatory.• Strong knowledge of UAE authority requirements, regulations, and applicable codes.• Experience in architectural design, coordination, technical reviews, and QA/QC.• Ability to coordinate with clients, consultants, contractors, and multidisciplinary teams.• Strong communication, leadership, and problem-solving skills.<br>Please note: Only shortlisted candidates will be contacted.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Testing and Commissioning Engineer</b> in <b>Abu Dhabi, UAE</b>. Our client is a reputed organization in the <b>Electromechanical / Electrical Contracting</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform testing and commissioning of electrical and electromechanical systems.<br></li><li>Verify installations against project specifications and approved drawings.<br></li><li>Conduct functional and performance testing of electrical equipment.<br></li><li>Diagnose and resolve commissioning issues efficiently.<br></li><li>Coordinate with project managers, consultants, and site teams.<br></li><li>Prepare commissioning reports and technical documentation.<br></li><li>Ensure compliance with project quality and safety standards.<br></li><li>Support project handover and client acceptance activities.<br></li></ul>Required Skills<br><ul><li><b>Testing &amp; Commissioning</b> – Hands-on experience with electrical systems.<br></li><li><b>Electrical Troubleshooting</b> – Identify and rectify faults efficiently.<br></li><li><b>MEP Knowledge</b> – Understanding of electromechanical installations.<br></li><li><b>Technical Documentation</b> – Preparation of commissioning reports.<br></li><li><b>Safety Standards</b> – Knowledge of electrical safety regulations and QA/QC procedures.<br></li></ul>Preferred Skills<br><ul><li>Experience with MV/LV electrical systems.<br></li><li>Familiarity with international commissioning standards.<br></li><li>Strong coordination and communication skills.<br></li></ul>Work Experience Requirements<br><p>Work experience is <b>not specified</b> in the posting. <b>Typical:</b> 3–7 years of experience in testing and commissioning within electrical or MEP contracting projects, preferably handling commercial, industrial, or infrastructure projects.<br></p><br>Education<br><ul><li><b>Minimum:</b> Bachelor's Degree in Electrical Engineering <i>(Typical)</i><br></li><li><b>Preferred:</b> Master's Degree or relevant specialization <i>(Typical)</i><br></li><li><b>Additional Certifications:</b> Testing &amp; Commissioning / Electrical Safety certifications <i>(Typical)</i><br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>We are seeking a Microsoft Copilot Agent Developer to design, build, and deploy enterprise-grade AI agents and business process automation solutions using the Microsoft 365 ecosystem. The successful candidate will work closely with business stakeholders and technical teams to develop Copilot Studio agents, automate workflows, and integrate Microsoft 365 services. Key Responsibilities • Design, develop, test and deploy Microsoft Copilot Studio agents. • Build conversational AI experiences integrated with Microsoft 365 services. • Develop Power Apps (Canvas and Model-driven where applicable) for business solutions. • Develop and maintain Power Automate cloud flows and approval workflows. • Integrate Copilot agents with SharePoint, Teams, Outlook, OneDrive, Dataverse and other Microsoft services. • Work with Microsoft Graph APIs, connectors and REST APIs where required. • Implement security, governance and best practices within the Power Platform ecosystem. • Troubleshoot, optimize and enhance existing Copilot and Power Platform solutions. • Prepare technical documentation, solution designs and knowledge transfer documents. • Collaborate with business users to gather requirements and deliver production-ready solutions. • 6 Months to 12 Months Contract.</p><p>• 3–4 years of experience in Microsoft Power Platform development. • Hands-on experience with Microsoft Copilot Studio. • Strong experience with Microsoft 365 services (Teams, SharePoint Online, Outlook, OneDrive, Entra ID). • Strong Power Apps development experience. • Strong Power Automate development experience. • Knowledge of Microsoft Graph API, connectors and integration patterns. • Experience with Dataverse and Power Platform administration is preferred. • Understanding of security, governance and environment management within Power Platform. • Good analytical, communication and stakeholder management skills.</p>

A boutique firm based in Dubai, United Arab Emirates, offering legal and corporate services to a diverse range of clients in various industries.<br>We are looking for an experienced Outsourcing Accountant to join our team in Dubai.<br>Requirements:Minimum 3 years of experience in an accounting firm, audit firm, tax advisory firm or corporate services provider. Experience managing the bookkeeping and tax compliance of multiple clients. Good knowledge of UAE VAT and Corporate Tax. Experience preparing financial statements and liaising with auditors. Experience with Xero is an advantage.<br>The ideal candidate should be able to work independently, demonstrate strong analytical skills, identify accounting and tax issues, and perform technical research where required.

A boutique firm based in Dubai, United Arab Emirates, offering legal and corporate services to a diverse range of clients in various industries.<br>We are looking for an experienced Outsourcing Accountant to join our team in Dubai.<br>Requirements:Minimum 3 years of experience in an accounting firm, audit firm, tax advisory firm or corporate services provider. Experience managing the bookkeeping and tax compliance of multiple clients. Good knowledge of UAE VAT and Corporate Tax. Experience preparing financial statements and liaising with auditors. Experience with Xero is an advantage.<br>The ideal candidate should be able to work independently, demonstrate strong analytical skills, identify accounting and tax issues, and perform technical research where required.

<p>JOB PURPOSE The Architectural Draftsman will prepare and update architectural drawings, shop drawings, and as-built documentation for the Ghuwaifat Project using CAD software. The role supports engineers in translating design details into construction-ready drawings. KEY RESPONSIBILITIES • Prepare and update architectural drawings, shop drawings, and details using CAD software. • Assist the Technical Engineer (Architectural) in translating design intent into construction-ready drawings. • Prepare and maintain accurate as-built documentation for architectural works. • Update drawings to reflect design revisions, RFI responses, and approved variations. • Coordinate drawing formats and standards with the design and site teams. • Maintain an organised drawing register and ensure the latest revisions are issued for use. • Support the preparation of drawings for material submittals and shop drawing approvals. • Assist in coordinating architectural drawings with civil, structural, and MEP disciplines to avoid clashes. • Print, plot, and distribute drawings to site and project teams as required. • Support handover documentation by compiling final as-built drawing sets.</p><p>QUALIFICATIONS & EXPERIENCE • Diploma in Architectural/Civil Drafting or related discipline. • 3–5 years of experience as a draftsman on construction projects. • Strong proficiency in AutoCAD; familiarity with Revit is an advantage. • Experience preparing shop drawings and as-built documentation. • UAE project experience is preferred. SKILLS & COMPETENCIES • Strong technical drawing and CAD skills. • High attention to detail and accuracy. • Good understanding of architectural construction details. • Ability to manage multiple drawing revisions and deadlines. • Good coordination and communication skills with engineers and site teams.</p>

Key Responsibilities:* Perform calibration of various measuring instruments as per applicable standards and procedures* Conduct onsite and laboratory calibration activities* Prepare calibration reports and documentation* Maintain calibration records, equipment traceability, and quality requirements* Ensure compliance with ISO/IEC 17025 requirements<br>Requirements:* Diploma/Degree in Electrical, Mechanical, Instrumentation* Experience in calibration of measuring instruments is preferred* Knowledge of calibration procedures, measurement uncertainty, and applicable standards will be an advantage* Experience in calibration of electrical, pressure, temperature, dimensional, torque, or other measuring instruments is an advantage* Good technical documentation and report preparation skills* Ability to work independently and as part of a team

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Strategy</strong></span></span></p><br><p><span><span>·</span></span><span><span>Participate in preparing and reviewing Terms of Reference (TORs) and Consultancy Service</span></span></p><br><p><span><span>·</span></span><span><span>Agreement documents in alignment with RTA’s design and contracting standards.</span></span></p><br><p><span><span>·</span></span><span><span>Support strategic coordination with external entities (e.g., Dubai Municipality, Ministry of</span></span></p><br><p><span><span>·</span></span><span><span>Public Works, developers) to align project objectives with broader city infrastructure goals.</span></span></p><br><p><span><span><strong>Operations</strong></span></span></p><br><p><span><span>·</span></span><span><span>Review geometric designs for road and highway projects to ensure technical accuracy and compliance with approved standards.</span></span></p><br><p><span><span>·</span></span><span><span>Coordinate between consultants and relevant RTA departments to ensure seamless execution of project tasks and resolution of design-related issues.</span></span></p><br><p><span><span>·</span></span><span><span>Monitor project progress, measure consultant performance, and ensure deliverables meet RTA’s quality expectations and timelines.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare technical reports, correspondence, and presentations for higher management, ensuring clarity and alignment with project objectives.</span></span></p><br><p><span><span>·</span></span><span><span>Actively participate in cross-functional RTA committees and working groups to support integrated design outcomes.</span></span></p><br><p><span><span><strong>Product/Process Improvement</strong></span></span></p><br><p><span><span>·</span></span><span><span>Provide input for enhancing coordination workflows between departments and external stakeholders to improve design efficiency and project delivery timelines.</span></span></p><br><p><span><span>·</span></span><span><span>Implement best practices from RTA’s project management policies to standardize design review, reporting, and follow-up procedures.</span></span></p><br><p><span><span>·</span></span><span><span>Physical Working Conditions</span></span></p><br><p><span><span>·</span></span><span><span>Office-based work with routine field visits and attendance at coordination meetings with consultants, agencies, and other stakeholders.</span></span></p><br><p><span><span>·</span></span><span><span>May require travel to design sites and participation in multi-agency reviews.</span></span></p><br> <p><span><span><strong>Job Qualifications &amp; Requirements</strong></span></span></p><br><p><span><span><strong>Education</strong>: Bachelor's degree/master's degree in civil engineering and Transportation Engineering</span></span></p><br><p><span><span><strong>Experience:</strong> 1+ years in case of master’s degree (2+ years in case of bachelor’s degree) in related field</span></span></p><br> </div>

<p>International Energy Resources is seeking an experienced Odoo ERP Techno-Functional Engineer to join our growing team. This role is ideal for someone who combines strong Odoo development expertise with a solid understanding of ERP business processes and enjoys working closely with stakeholders to deliver practical business solutions. As part of our digital transformation journey, you will play a key role in enhancing our Odoo ERP platform, supporting business process improvements, leading system integrations, and preparing the organization for the UAE's upcoming e-Invoicing requirements.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li><p>Analyze business requirements and translate them into functional and technical ERP solutions.</p></li><li><p>Configure, customize, and develop Odoo modules across Finance, Procurement, Inventory, Manufacturing. </p></li><li><p>Lead and support the implementation of UAE e-Invoicing requirements, including system integrations and regulatory compliance.</p></li><li><p>Develop and maintain custom Odoo applications using Python.</p></li><li><p>Integrate Odoo with third-party systems, APIs, and business applications.</p></li><li><p>Support ERP enhancements, upgrades, testing, deployments, and user training.</p></li><li><p>Collaborate with business users to optimize workflows and improve operational efficiency.</p></li><li><p>Troubleshoot system issues and provide ongoing technical and functional support.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Experience with UAE e-Invoicing, VAT compliance, ERP integrations is a strong advantage.</p></li><li><p>Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.</p></li><li><p>Minimum 3–5 years of experience in Odoo ERP development and techno-functional consulting.</p></li><li><p>Strong experience with Odoo v17+ and Python.</p></li><li><p>Good understanding of Manufacturing, Inventory, Procurement, Finance, and Supply Chain processes.</p></li><li><p>Knowledge of ERP implementation methodologies and business process mapping.</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Senior Dynamics 365 / Dataverse &amp; Power Automate Developer will participate in the implementation of the Ministry's Digital Transformation Program by designing, developing, and maintaining business applications using Microsoft Dynamics 365, Dataverse, and Power Platform technologies.<br> The role will work closely with the implementation vendor throughout the project lifecycle to ensure successful solution delivery, knowledge transfer, and long-term ownership of the platform after project completion Key Responsibilities Design, develop, customize, and maintain business applications using Microsoft Dynamics 365 and Dataverse.<br> Develop automated business processes and workflows using Power Automate.<br> Configure and customize business processes, forms, dashboards, and security models.<br> Develop plugins, custom APIs, integrations, and reusable components.<br> Integrate the platform with internal and external enterprise systems.<br> Participate in solution design, code reviews, testing, deployment, and production support.<br> Produce technical documentation and ensure effective knowledge transfer from the implementation vendor.<br> Troubleshoot and resolve application issues while ensuring system performance, security, and reliability.<br> Support continuous improvement and enhancement of the Digital Transformation platform.<br> Private Health Insurance Pension Plan Training &amp; Development Performance Bonus Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field.<br> Minimum 5 years of software development experience.<br> Minimum 3 years of hands-on experience with Microsoft Dynamics 365, Dataverse, and Power Platform.<br> Required Technical Skills Microsoft Dynamics 365 Customer Engagement Microsoft Dataverse Power Apps Power Automate C# .<br>NET Core / ASP.<br>NET Core JavaScript / TypeScript REST APIs SQL Server Azure DevOps Git Application Lifecycle Management (ALM)</span> </div>

<p>We are looking for an experienced Mechanical Estimator – Utilities Infrastructure to join our Tendering & Estimation team in Abu Dhabi. The ideal candidate will have strong experience in STP, pump stations, water & wastewater infrastructure projects, with proven expertise in preparing competitive mechanical cost estimates, tender submissions, and value engineering solutions.</p><p><strong>Desired Candidate Profile</strong></p><p>✅Review tender documents, IFB, drawings, specifications, BOQs, and scope of work.<br>✅ Prepare detailed mechanical cost estimates for:</p><ul><li><p>Sewage Treatment Plants (STP – Package & Conventional)</p></li><li><p>Sewage & Stormwater Pump Stations</p></li><li><p>Potable Water & Irrigation Networks</p></li><li><p>Rising Mains and DI/HDPE/GRP Pipeline Systems</p></li></ul><p>✅ Perform quantity take-offs for:</p><ul><li><p>Pumps, blowers, mixers, screens</p></li><li><p>Mechanical equipment and accessories</p></li><li><p>Piping, valves, fittings, chambers</p></li></ul><p>✅ Develop detailed cost build-ups covering:</p><ul><li><p>Materials</p></li><li><p>Equipment</p></li><li><p>Installation labour</p></li><li><p>Testing & commissioning</p></li><li><p>Subcontract works</p></li></ul><p>✅ Prepare RFQs, coordinate with suppliers/subcontractors, and evaluate technical & commercial quotations.</p><p>✅ Identify value engineering opportunities and recommend cost-effective solutions.</p><p>✅ Coordinate with Civil, Electrical, and Process teams during tender preparation.</p><p>✅ Ensure compliance with project specifications, local authority requirements, and international standards.</p><br><p><strong>Technical Knowledge Required:</strong></p><ul><li><p>STP mechanical processes and equipment</p></li><li><p>Pump station systems</p></li><li><p>DI, HDPE & GRP piping networks</p></li><li><p>Valves, fittings, and chambers</p></li><li><p>Tendering and cost estimation for infrastructure projects</p></li><li><p>Value engineering and Design & Build (D&B) projects</p></li></ul><br><p><strong>Preferred Skills:</strong></p><ul><li><p>Strong analytical and numerical ability</p></li><li><p>High attention to detail</p></li><li><p>Ability to work under tight tender deadlines</p></li><li><p>Strong coordination and communication skills</p></li><li><p>Experience with infrastructure tender submissions and cost breakdowns</p></li></ul>

<ol><li><p>Support planning and execution of new production equipment installation projects, including scheduling, site-readiness coordination, and OEM/vendor liaison through to handover to Manufacturing</p></li><li><p>Assist in technical acceptance testing and commissioning sign-off, ensuring new equipment meets operational and quality standards</p></li><li><p>Coordinate structured decommissioning and dismantling of legacy equipment in a safe, sequenced, and operationally non-disruptive manner</p></li><li><p>Track project budgets and costs, and support vendor/contractor management including quotations, negotiations, and performance monitoring</p></li><li><p>Maintain project documentation, schedules, and status reporting for review with senior management</p></li><li><p>Build effective working relationships across Manufacturing, Maintenance, Supply Chain, and Finance to ensure smooth project delivery</p></li><li><p>Support compliance with HSE, regulatory, and customs requirements on all project and asset-disposal activities<br>Relevant experience in ERW Steel Pipe Manufacturing Company in UAE/GCC is mandatory. Freshers excused.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification:</strong> Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a closely related technical discipline. A project management certification (or working toward one) is an advantage.</p><p><strong>Experience:</strong> 5–8 years of project management experience in a manufacturing or industrial environment, ideally with exposure to capital equipment installation, plant projects, or steel/tube/pipe or process manufacturing. GCC experience is a plus.</p><p><strong>Skills:</strong></p><ul><li><p>Project planning, scheduling, and execution</p></li><li><p>Contractor/vendor coordination and budget tracking</p></li><li><p>Strong stakeholder management and cross-functional communication</p></li><li><p>Working knowledge of HSE and regulatory compliance in an industrial setting</p></li><li><p>Proficiency with MS Project/Excel or similar planning tools</p></li></ul>

<ul><li><p>The Technician – Mechanical is responsible for performing complex mechanical repairs in line with manufacturer standards, managing additional repair requests, and ensuring accurate job card documentation. The role also involves handling warranty parts, maintaining workshop safety and cleanliness, and supporting overtime when required. Effective use of materials and clear communication with the team are essential.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Carry out repairs as per manufacturer standards and work instructions.</p></li><li><p>Adhere to the Fix it Right First Time (F1) principle.</p></li><li><p>Complete jobs within the allotted time.</p></li><li><p>Provide feedback on additional repairs to the Team Leader, Foreman, or Controller.</p></li><li><p>Communicate delays in advance to the Team Leader/Foreman.</p></li><li><p>Work overtime when required by the Team Leader/Foreman/Controller.</p></li><li><p>Record oils/consumables on the job card.</p></li><li><p>Handle customer vehicles safely and responsibly.</p></li><li><p>Raise parts requisitions when necessary.</p></li><li><p>Complete warranty tags, attach them to parts, and store them appropriately.</p></li><li><p>Obtain prior approval for additional repairs/warranty jobs.</p></li><li><p>Use protective covers on customer vehicles.</p></li><li><p>Maintain cleanliness of the work area.</p></li><li><p>Comply with workshop safety procedures and SOPs, including use of safety equipment and PPE.</p></li><li><p>Keep overalls and safety shoes clean.</p></li><li><p>Ensure materials issued on job cards are used for the respective vehicles.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Educational Qualification</strong></p><ul><li><p>2-year ITI in Automobile / 3-year Diploma in Automobile or Mechanical Engineering (or equivalent).</p></li></ul><p>Work Experience</p><ul><li><p>Minimum 5 years’ dealership experience, including at least 2 years as a Technician.</p></li></ul><p><strong>Competencies</strong></p><ul><li><p>Physical fitness to perform mechanical repairs.</p></li></ul><p><strong>Languages</strong></p><ul><li><p>Basic English proficiency.</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> As part of our Clients continued growth, we are seeking an experienced <strong>Pre-Construction Engineer</strong>&nbsp;to lead the development of construction methodologies, logistics strategies, temporary works planning, and structural buildability solutions during the pre-construction phases of major building projects.<br> Key Responsibilities: <ul> <li>Lead the development of comprehensive construction logistics strategies and site logistics plans, ensuring safe and efficient site operations, access arrangements, material flow, welfare facilities, and traffic management.</li> <li>Prepare and manage crane strategies, tower crane studies, lifting plans, and heavy lifting methodologies to support tender submissions and project delivery.</li> <li>Oversee the planning and coordination of temporary works solutions, including excavation support systems, working platforms, access arrangements, formwork, and structural stability requirements.</li> <li>Develop detailed construction methodologies, phasing plans, sequencing strategies, and buildability assessments for complex projects.</li> <li>Collaborate with design, planning, commercial, and project delivery teams to identify risks, opportunities, and value engineering solutions during the pre-construction phase.</li> </ul> <br>Candidate Requirement:<br> <ul> <li>Bachelor's Degree in Civil Engineering or a related construction discipline.</li> <li>Minimum 10 years' experience within the UAE/GCC construction market, working for reputable main contractors on large-scale building projects.</li> <li>Demonstrable expertise in construction logistics, crane planning, temporary works, construction sequencing, and methodology development.</li> <li>Strong technical understanding of substructure, superstructure, structural construction, excavation works, and complex buildability challenges.</li> <li>Experience preparing and reviewing technical tender submissions, construction methodologies, logistics plans, and pre-construction delivery strategies.</li> <li>Excellent communication, stakeholder management, and presentation skills, with the ability to engage effectively with clients, consultants, subcontractors, and senior management.</li> </ul> <br><br> </div>

A boutique firm based in Dubai, United Arab Emirates, offering legal and corporate services to a diverse range of clients in various industries.<br>We are looking for an experienced Outsourcing Accountant to join our team in Dubai.<br>Requirements:Minimum 3 years of experience in an accounting firm, audit firm, tax advisory firm or corporate services provider. Experience managing the bookkeeping and tax compliance of multiple clients. Good knowledge of UAE VAT and Corporate Tax. Experience preparing financial statements and liaising with auditors. Experience with Xero is an advantage.<br>The ideal candidate should be able to work independently, demonstrate strong analytical skills, identify accounting and tax issues, and perform technical research where required.