Financial Analyst Jobs in UAE

<ul><li><p>Scheduled servicing. Services the plant, vehicles and equipment the Company holds as each falls due, to the interval its manufacturer sets. Changes oils, filters, fluids and wear items, and reports what a service finds beyond its scope. </p></li><li><p>Fault diagnosis and repair. Works a reported fault back to its cause rather than its symptom, repairs it, and tests the machine under load before it returns to work. Attends breakdowns in the yard and on site. </p></li><li><p>Hydraulic, engine and transmission work. Diagnoses and repairs hydraulic pumps, motors, valves, rams and hoses, and pressure-tests the system. Services and overhauls diesel engines and their fuel and cooling systems. Repairs transmissions, final drives, axles and brakes. </p></li><li><p>Parts and consumables. Requests the parts a job needs against the machine they are for, checks each against that machine's specification, and rejects what does not meet it. Fits to the manufacturer's torque and tolerance, and records what was fitted. </p></li><li><p>Workshop safety and housekeeping. Isolates a machine before working on it, props a raised load on rated stands, refits guards, and controls hot work. Disposes of waste oil, filters and chemicals properly, and keeps the bench and the workshop's tools in serviceable, calibrated condition. </p></li><li><p>The record of the work. Writes up each job against the machine: the fault found, the work carried out, the parts fitted, and the hours or mileage at the time. Says where a machine falls short of the standard set for it.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possesses a vocational degree or certification in Heavy Equipment Mechanics or a related field.</li><li>Holds a valid relevant trade certification (e.g., Red Seal Heavy Equipment Technician).</li><li>Has a minimum of 5 years of hands-on experience maintaining and repairing drilling rigs and piling equipment.</li><li>Demonstrates proficiency in diagnosing and repairing diesel engines, hydraulic systems, and heavy-duty transmissions.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Senior Technician - RM 2,3 E &amp; A, Instrumentation (Steel Industry) <p>Professional Experience (Must Have)</p><br> <p>5 years' Experience In steel industry into&nbsp;Rolling Mill 2&amp;3</p><br> <p>Minimum Qualifications</p><br> <p>Diploma/Bachelor's </p><br>Key Responsibilities <ul><li>Carry out shift-based <strong>instrumentation and automation maintenance</strong> activities in RM 2 &amp; RM 3.</li><li>Troubleshoot and maintain field instruments, control systems, sensors, transmitters, switches, and control loops.</li><li>Maintain and troubleshoot <strong>PLC, HMI, SCADA, and automation systems</strong> associated with the rolling mill.</li><li>Monitor and troubleshoot instrumentation-related alarms, interlocks, trips, and process abnormalities.</li><li>Maintain instruments used for measurement and control of temperature, pressure, flow, level, speed, position, and other process parameters.</li><li>Inspect, calibrate, test, and replace defective instruments and control components.</li><li>Troubleshoot <strong>control valves, solenoid valves, actuators, proximity sensors, photo sensors, encoders, limit switches, and position sensors</strong>.</li><li>Support maintenance of rolling mill automation systems, drives, motors, MCCs, control panels, and associated E&amp;A equipment.</li><li>Carry out preventive and predictive maintenance according to the maintenance schedule.</li><li>Attend breakdowns promptly and restore equipment to normal operating condition with minimum production downtime.</li><li>Participate in planned shutdowns, major maintenance, commissioning, modification, and improvement activities.</li><li>Analyze recurring instrumentation/automation failures and support root-cause analysis.</li><li>Read and interpret <strong>instrumentation drawings, loop diagrams, electrical schematics, control logic, and P&amp;IDs</strong>.</li><li>Coordinate with Mechanical, Electrical, Production, and Process teams during breakdowns and equipment interventions.</li><li>Maintain spare parts, tools, test equipment, calibration equipment, and maintenance records.</li><li>Ensure proper documentation of breakdowns, preventive maintenance, calibration, and shift activities.</li><li>Support installation, testing, commissioning, and modification of new instruments and automation equipment.</li><li>Guide and support junior technicians and contract manpower during maintenance activities.</li><li>Ensure proper housekeeping in instrumentation panels, control rooms, field areas, and maintenance work locations.</li></ul> <br> <br> </div>

<ul><li><p>Repairs and maintains efficiently a wide range of electrical equipment and systems.</p></li><li><p>Ensures timely preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), to restore the electrical systems.</p></li><li><p>Assists Technician Engineers or attends jobs independently.&nbsp; Has clear understanding of relevant methods and procedures - including associated risks - and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors repeated breakdowns and suggests and implements proper resolutions to avoid recurrence of similar problems.</p></li><li><p>Reads and understands electrical drawings and job instructions from immediate supervisor.</p></li><li><p>Identifies dangers related to High Voltage equipment and carries out maintenance and breakdown activities safely and in line with EGA Health & Safety regulations and Electrical Maintenance Procedures.</p></li><li><p>If appointed in writing by EGA has the authority to receive Permit to Work documents as per EHA Safety Rules.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in Electrical Engineering or Craft /Trade certificate or equivalent qualification.</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a Power plant and electrical sub-stations).</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in electrical maintenance.</p></li><li><p>Hands-on experience of generators, switchgear, transformers and electrical schemes.</p></li></ul><p><strong>Skills:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>Knowledge of all electrical maintenance tools.</p></li><li><p>Some PC. Knowledge.</p></li><li><p>Conversant with generators, motors, transformers and switchgear.</p></li><li><p>Speaks, reads and writes English to a good standard.</p></li><li><p>Excellent interpersonal skills and assertive personality.</p></li><li><p>Computer literate.</p></li><li><p>Teamwork skills (including shift work is also essential)</p></li><li><p>Self-motivated and dedicated with a desire to work in a Multi-Cultural environment.</p></li><li><p>Experience using computerised maintenance system, ordering spare parts and maintaining records.</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview Of The Role:</b></p><p><br></p><ul><li>The Job Scheduler role ensures effective utilization of time and resources by properly allotting repair jobs to production lines. This position supports the workshop's profitability by maintaining work standards and adhering to quality and safety protocols. The role requires coordinating with various personnel, updating job schedules, and maintaining discipline within the service establishment.</li></ul><p><br></p><p><b>What You Will Do:</b></p><p><br></p><p>General</p><p><br></p><ul><li>Execute assigned jobs according to established work standards and required time, ensuring compliance with company policy and procedures.</li><li>Maintain discipline in the service establishment, ensuring a safe and clean area by adhering strictly to company rules and regulations.</li><li>Coordinate with the Workshop controller in daily business activities to ensure smooth operations.</li><li>Work with the Manager to plan and coordinate repair schedules effectively.</li><li>Update and monitor Job Scheduling &amp; Progress Control at regular intervals to ensure on-time delivery and compliance with QMS SOP.</li><li>Stay updated with new technology, work procedures, and time standards to maintain or improve work productivity and quality.</li><li>Maintain electronic and/or paper records of completed service work as per QMS SOP guidelines.</li><li>Perform other tasks assigned by the immediate superior or manager, as necessary, to support workshop activities.</li><li>Contribute to team efforts by accomplishing related results as needed and participate in organization's improvement activities.</li><li>Ensure compliance with ALAC Quality Management System and health and safety standards, preventing harm to the environment.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills To Be Successful:</b></p><p><br></p><ul><li>Strong communication skills.</li><li>Excellent analytical skills.</li><li>Supervisory skills.</li><li>Ability to negotiate and follow-up effectively.</li></ul><p><br></p><p><b>What Qualifies You For The Role:</b></p><p><br></p><ul><li>Degree or Diploma in any field.</li><li>3-5 years of experience in a reputed workshop in a similar role.</li><li>Certified Master B&amp;P Advisor or Technician.</li><li>Fluency in spoken Arabic and proficiency in computer operations.</li></ul><p><br></p><p><br></p></div>

<ul><li><p>The Job Scheduler role ensures effective utilization of time and resources by properly allotting repair jobs to production lines. This position supports the workshop's profitability by maintaining work standards and adhering to quality and safety protocols. The role requires coordinating with various personnel, updating job schedules, and maintaining discipline within the service establishment.</p></li></ul><p><br><strong>What You Will Do:</strong><br><br></p><p><strong>General</strong></p><p><br></p><ul><li><p>Execute assigned jobs according to established work standards and required time, ensuring compliance with company policy and procedures.</p></li><li><p>Maintain discipline in the service establishment, ensuring a safe and clean area by adhering strictly to company rules and regulations.</p></li><li><p>Coordinate with the Workshop controller in daily business activities to ensure smooth operations.</p></li><li><p>Work with the Manager to plan and coordinate repair schedules effectively.</p></li><li><p>Update and monitor Job Scheduling & Progress Control at regular intervals to ensure on-time delivery and compliance with QMS SOP.</p></li><li><p>Stay updated with new technology, work procedures, and time standards to maintain or improve work productivity and quality.</p></li><li><p>Maintain electronic and/or paper records of completed service work as per QMS SOP guidelines.</p></li><li><p>Perform other tasks assigned by the immediate superior or manager, as necessary, to support workshop activities.</p></li><li><p>Contribute to team efforts by accomplishing related results as needed and participate in organization's improvement activities.</p></li><li><p>Ensure compliance with ALAC Quality Management System and health and safety standards, preventing harm to the environment.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Required Skills To Be Successful:</strong><br><br></p><ul><li><p>Strong communication skills.</p></li><li><p>Excellent analytical skills.</p></li><li><p>Supervisory skills.</p></li><li><p>Ability to negotiate and follow-up effectively.</p></li></ul><p><br><strong>What Qualifies You For The Role:</strong><br><br></p><ul><li><p>Degree or Diploma in any field.</p></li><li><p>3-5 years of experience in a reputed workshop in a similar role.</p></li><li><p>Certified Master B&P Advisor or Technician.</p></li><li><p>Fluency in spoken Arabic and proficiency in computer operations.</p></li></ul></li></ul>

<p>Maintenance Technician are primarily responsible for the upkeep, repair, and maintenance of equipment, machinery, buildings, and grounds. Their duties include responding to maintenance requests, conducting routine inspections, performing repairs, and ensuring that all systems and equipment operate efficiently and safely. They are also involved in preventative maintenance, break down/emergency maintenance record keeping, and collaborating with other technicians or contractors as required by the Company to function in an efficient, safe and cost effective way. <br><br></p><ul><li><p>Ensure that Maintenance work takes place in a Safe and efficient manner as</p></li></ul><p>prescribed by relevant work permits and SOP's, identifying opportunities for Safety</p><p>improvements, immediately reporting workplace hazards and events should they</p><p>arise.</p><ul><li><p>Close adherence to SHE protocols and requirements for all task even more so for</p></li></ul><p>high-risk tasks.</p><ul><li><p>To be on standby when required</p></li><li><p>Diligent attention to the maintenance of a clean workspace, through effective</p></li></ul><p>housekeeping, is a key focus.</p><ul><li><p>Attend the routine maintenance of plant apparatus, infrastructure and equipment</p></li></ul><p>according to prescribed work schedules to ensure its optimal working performance.</p><ul><li><p>Assist with the technical supervision of Contractors on site, facilitating site safety</p></li></ul><p>by ensuring their correct use of PPE and the application of work methods defined</p><p>in issued work permits</p><ul><li><p>Ensure that activities are appropriately administered through the accurate</p></li></ul><p>recording of all relevant data according to the requirements of associated process</p><p>documents (SOP's, Checklists, Work Permits etc.) to facilitate engineering</p><p>inventory management and departmental administration.</p><ul><li><p>Identify opportunities that deliver improvements to workspace layout (5S) and</p></li></ul><p>process methods for the purpose of achieving industry best practise for Safety,</p><p>Quality and Operability.</p><ul><li><p>Perform any other reasonable task required to meet business objectives</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p> Accredited Qualification (Course or Certificate) in the field o f Engineering, Science, or HS&E </p></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li></ul><br><ul><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li></ul><br><ul><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li></ul><br><ul><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li></ul><br><ul><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li></ul><br><ul><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li></ul><br><ul><li><p>Performs various works related to welding and fabrication.</p></li></ul><br><ul><li><p>Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.</p></li></ul><br><ul><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li></ul><br><ul><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li></ul><ul><li><p>Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

<p>A. Manage all plumbing activities and commissioning mechanical piping (fluid mechanics) such as chillers and water line. </p><p>B. Service and replace old or faulty equipment but not limited to troubleshoot equipment malfunctions. </p><p>C. Supervise and execute maintenance for the factory building.</p><p>D. Coordinate and supervise welding section material procurement and labor coordination. </p><p>E. Adhere to all safety and performance regulations. </p><p><strong>Desired Candidate Profile</strong></p><p>Supervise technicians and participate in diagnosing, repairing, and inspecting breakdown problems. Read specifications of diagnosis on work performed and analyze the nature of repairing works and required accessories to carry out such maintenance. </p><p>Design maintenance strategies, procedures and methods if it is deem required.</p><p>Carry out routine maintenance work and response to equipment faults. </p><p>Fit new parts and make sure equipment is working correctly.</p><p>Carry out quality inspections on job sites. </p><p>Arrange the procurement of fixtures, fittings, or components. </p><p>Deal with emergencies, unplanned problems/ breakdowns and repairs.</p><p>Organize and direct maintenance shutdown and startup.</p><p>Develop maintenance strategies to help with the installation and commissioning guidelines. </p><p>Ensure there is continuous cover of the machinery and equipment in case of breakdowns for plumbing and welding. </p><p>Develop and distribute work plan assignments and ensures timely completion.</p><p>Assign Technician for diagnosis of the requested repair and maintenance for plumbing and welding. Check the compliance of the work done by technicians for the safety and quality standards. Oversee the performance skills of technicians during maintenance and repair works. </p><p>Prepare and review of maintenance related documents. </p><p>Maintain data base of repair works and prepare reports relating to major breakdown repairs. </p><p>Prepare Service Order and process for approval.</p><p>Organize and develop the work scope for contractual projects and recommend preferred vendors. Perform project coordination in various maintenance projects such as Aerosol plant, machine installations and others. </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview Of The Role:</b></p><p><br></p><ul><li>The Job Scheduler role ensures effective utilization of time and resources by properly allotting repair jobs to production lines. This position supports the workshop's profitability by maintaining work standards and adhering to quality and safety protocols. The role requires coordinating with various personnel, updating job schedules, and maintaining discipline within the service establishment.</li></ul><p><br></p><p><b>What You Will Do:</b></p><p><br></p><p>General</p><p><br></p><ul><li>Execute assigned jobs according to established work standards and required time, ensuring compliance with company policy and procedures.</li><li>Maintain discipline in the service establishment, ensuring a safe and clean area by adhering strictly to company rules and regulations.</li><li>Coordinate with the Workshop controller in daily business activities to ensure smooth operations.</li><li>Work with the Manager to plan and coordinate repair schedules effectively.</li><li>Update and monitor Job Scheduling &amp; Progress Control at regular intervals to ensure on-time delivery and compliance with QMS SOP.</li><li>Stay updated with new technology, work procedures, and time standards to maintain or improve work productivity and quality.</li><li>Maintain electronic and/or paper records of completed service work as per QMS SOP guidelines.</li><li>Perform other tasks assigned by the immediate superior or manager, as necessary, to support workshop activities.</li><li>Contribute to team efforts by accomplishing related results as needed and participate in organization's improvement activities.</li><li>Ensure compliance with ALAC Quality Management System and health and safety standards, preventing harm to the environment.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills To Be Successful:</b></p><p><br></p><ul><li>Strong communication skills.</li><li>Excellent analytical skills.</li><li>Supervisory skills.</li><li>Ability to negotiate and follow-up effectively.</li></ul><p><br></p><p><b>What Qualifies You For The Role:</b></p><p><br></p><ul><li>Degree or Diploma in any field.</li><li>3-5 years of experience in a reputed workshop in a similar role.</li><li>Certified Master B&amp;P Advisor or Technician.</li><li>Fluency in spoken Arabic and proficiency in computer operations.</li></ul><p><br></p></div>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

<p>Tower Crane Mechanic / Erector – Roles & Responsibilities</p><ul><li><p>Carry out <strong>tower crane erection, dismantling, climbing, jumping, and mast extension works</strong> at construction sites.</p></li><li><p>Install and dismantle tower crane components including <strong>mast sections, slewing units, jibs, counter-jibs, counterweights, tie frames, and anchoring systems</strong>.</p></li><li><p>Perform <strong>mechanical installation, maintenance, inspection, adjustment, and troubleshooting</strong> of tower cranes.</p></li><li><p>Diagnose and repair mechanical faults involving <strong>gearboxes, brakes, clutches, wire ropes, sheaves, bearings, hydraulic systems, and other crane components</strong>.</p></li><li><p>Carry out <strong>routine preventive maintenance and breakdown repairs</strong> to ensure safe and reliable crane operation.</p></li><li><p>Assist with <strong>tower crane commissioning, testing, and third-party inspection preparation</strong>.</p></li><li><p>Check bolts, connections, pins, safety devices, limit switches, and structural components during erection and maintenance activities.</p></li><li><p>Follow approved <strong>erection/dismantling procedures, method statements, risk assessments, and safety requirements</strong>.</p></li><li><p>Coordinate with site engineers, crane operators, riggers, and supervisors during erection, jumping, maintenance, and dismantling works.</p></li><li><p>Ensure proper use of <strong>lifting equipment, tools, PPE, and safety devices</strong> during all site activities.</p></li><li><p>Identify unsafe conditions and immediately report any technical or safety issues to the supervisor.</p></li><li><p>Maintain proper records of <strong>maintenance, inspections, spare parts, repairs, and site activities</strong>.</p></li><li><p>Work at height and in outdoor construction-site conditions while maintaining strict safety standards.</p></li><li><p>Support emergency breakdowns and provide <strong>technical assistance at different project sites</strong> when required.<br></p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Previous experience as a <strong>Tower Crane Mechanic / Erector / Technician</strong>.</p></li><li><p>Practical experience with <strong>tower crane erection, dismantling, climbing/jumping, and maintenance</strong>.</p></li><li><p>Good knowledge of mechanical systems and tower crane components.</p></li><li><p>Ability to read and understand <strong>technical drawings and crane manuals</strong>.</p></li><li><p>Physically fit and comfortable working at height.</p></li><li><p>Strong commitment to <strong>HSE and site safety procedures</strong>.</p></li><li><p>UAE/GCC tower crane experience is preferred.</p></li><li><p>Ability to work independently and as part of a technical team.</p></li><li><p>Valid UAE driving license is an advantage.</p></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.Assists other departments in the repair and troubleshooting of equipment.Inputs data into maintenance management systems for works and manning records.Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation & troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.Assists other departments in the repair and troubleshooting of equipment.Inputs data into maintenance management systems for works and manning records.Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation & troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<ul><li>Oversee and direct all instrumentation construction activities on-site, ensuring adherence to project plans and specifications.</li><li>Manage and coordinate instrumentation subcontractors, reviewing their work methods and progress to ensure quality and efficiency.</li><li>Interpret complex instrumentation drawings, schematics, and P&IDs to guide installation and troubleshooting efforts.</li><li>Implement and enforce stringent safety protocols for all instrumentation personnel and activities, conducting regular safety inspections.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering, Instrumentation Engineering, or a related technical field.</p></li><li><p>Minimum of 7 years of progressive experience in construction supervision, specifically focused on instrumentation projects.</p></li><li><p>Proven track record of successfully managing instrumentation scopes in industrial or process plant environments.</p></li><li><p>Possession of relevant certifications such as Certified Instrumentation Technician (CIT) or equivalent is highly advantageous.<br><br><br></p><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in construction (not design), Pipeline / Oil & Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.<br></p><p><strong>Age Criteria:</strong></p><p>Maximum age limit is 49 years</p><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience<br></p><p><strong>Managerial and SR. Positions:</strong></p><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory<br></p><p><strong>Interview Date:</strong> Mumbai - 09th Aug 2026, Sunday, Chennai - 12th Aug 2026, Wednesday & Kochi - 16th Aug 2026, Sunday - Reporting time – 08:30 AM to 12:00 PM & 2:30 PM to 3:30 PM<br></p><p><strong>Mumbai - Mirage Hotel,</strong></p><p>Mumbai International Airport Approach Road, Near Marol Aqua Metro Stn. Andheri (East), Mumbai, Maharashtra, India – 400 059.</p><p>Waiting Hall – Amber Hall<br></p><p><strong>Chennai - The Residency Towers,</strong></p><p>115, Sir Thyagaraya Road, Chennai 600017</p><p>Waiting Hall – Senator Hall<br></p><p><strong>Kochin - Crowne Plaza Kochi,</strong></p><p>XI 641A Kundanoor Junction, NH-47 Bypass</p><p>Maradu, Ernakulam, Kerala, India, 682305</p><p>Waiting Hall – Onam Hall</p></li></ul>

<p><strong>Job Summary</strong></p><p>Al Meshari Heavy Equipment Trading LLC is seeking an experienced and results-driven Operation Manager to oversee and manage the daily operations of our generator rental business. The ideal candidkate must have strong technical and operational knowledge of diesel generators, rental fleet management, maintenance planning, logistics coordination, and customer service within the generator rental industry.</p><br><ul><li><p><strong>Key Responsibilities</strong></p><ul><li><p>Manage day-to-day operations of the generator rental division.</p></li><li><p>Plan, coordinate, and monitor generator deployment, installation, commissioning, and off-hire activities.</p></li><li><p>Ensure maximum fleet utilization and operational efficiency.</p></li><li><p>Supervise maintenance schedules, breakdown services, and preventive maintenance programs.</p></li><li><p>Coordinate with sales, workshop, logistics, and technical teams to ensure timely project execution.</p></li><li><p>Monitor generator performance, fuel consumption, and maintenance costs.</p></li><li><p>Ensure compliance with company policies, safety regulations, and industry standards.</p></li><li><p>Prepare operational reports, fleet status reports, and performance analyses.</p></li><li><p>Manage manpower allocation, technician schedules, and site operations.</p></li><li><p>Maintain strong relationships with customers and ensure prompt resolution of operational issues.</p></li><li><p>Control operational expenses and identify opportunities for cost optimization.</p></li><li><p>Support business growth by improving operational processes and service delivery.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum 5 years of experience in the Generator Rental Industry.</p></li><li><p>Bachelor’s Degree or Diploma in Mechanical, Electrical, or related Engineering field.</p></li><li><p>Strong knowledge of diesel generators, power distribution systems, and rental operations.</p></li><li><p>Experience in fleet management, workshop operations, and logistics coordination.</p></li><li><p>Excellent leadership, team management, and problem-solving skills.</p></li><li><p>Ability to work under pressure and manage multiple projects simultaneously.</p></li><li><p>Proficient in Microsoft Office and operational reporting.</p></li><li><p>Valid UAE Driving License preferred.</p></li></ul><br><p><strong>Skills Required</strong></p><ul><li><p>Operations Management</p></li><li><p>Fleet Management</p></li><li><p>Generator Rental Operations</p></li><li><p>Maintenance Planning</p></li><li><p>Logistics Coordination</p></li><li><p>Team Leadership</p></li><li><p>Customer Relationship Management</p></li><li><p>Budget Control</p></li><li><p>Health & Safety Compliance</p></li><li><p>Problem Solving & Decision Making</p></li></ul><br><p><strong>What We Offer</strong></p><ul><li><p>Competitive Salary Package</p></li><li><p>Career Growth Opportunities</p></li><li><p>Professional Working Environment</p></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and repair complex electrical systems in vehicles, ensuring compliance with manufacturer specifications and safety regulations.</li><li>Install, maintain, and repair wiring, lighting, and electrical components, utilizing specialized tools and equipment.</li><li>Perform routine inspections and troubleshooting on automotive electrical systems to identify issues before they escalate.</li><li>Collaborate with mechanics to ensure seamless integration of electrical systems with mechanical components.</li><li>Utilize diagnostic software and equipment to analyze and resolve electronic control unit (ECU) problems in modern vehicles.</li><li>Keep accurate records of repairs and maintenance performed, providing detailed reports to management and customers.</li><li>Stay updated on the latest automotive technologies and electrical systems to enhance service quality and efficiency.</li><li>Educate customers on proper vehicle maintenance and electrical system care to promote longevity and safety.</li><li>Adhere to all safety protocols and regulations while working in a shop environment to ensure a safe workspace.</li><li>Participate in ongoing training and professional development to advance skills and knowledge in the automotive field.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent, with specialized training in automotive electrical systems preferred.</li><li>Certification as an Automotive Service Excellence (ASE) technician in electrical systems highly desirable.</li><li>Minimum 3 years of hands-on experience in diagnosing and repairing automotive electrical systems.</li><li>Proficiency in using diagnostic tools such as multimeters, oscilloscopes, and scan tools.</li><li>Strong problem-solving skills with a detail-oriented approach to troubleshooting and repairs.</li><li>Ability to communicate effectively with customers and team members in English; additional languages a plus.</li><li>Physical stamina and dexterity to handle the demands of working in confined spaces and with intricate components.</li><li>Team-oriented mindset with a willingness to collaborate and share knowledge with peers.</li><li>Strong commitment to safety practices and procedures in a workshop environment.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct daily Civil inspections and coordinate with Client representative during site visit. </p><p>Prepare Inspection and Test plan (ITP), other Civil Procedures with respect to project Standards and Specifications and implement same in site. </p><p>Coordinating with Laboratory technician for conducting field tests like Cube Test/FDT. </p><p>Witnessing Trial Mix Test Registering tracking and closing of all RFI’s. </p><p>MAR preparation for Civil materials. </p><p>Preparation of final civil documents for the Project completion Dossier.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Civil Engineering with 8+year experience in Civil Inspections related to Oil &amp; Gas projects in Middle East. </p><p>Previous approval in ADNOC Group or other Oil/Gas Client. </p><p>Familiarize with International codes and standards used in EPC Projects. </p><p>Willing to reside in site project accommodation.</p><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p></li></ul><br><p><strong>Interview Date: Kochi - 19th Jul'26, Chennai -21st Jul'26 &amp; Mumbai -23rd Jul'26 - Reporting time – 08:30 AM to 12:00 PM &amp; 2:30 PM to 3:30 PM</strong></p><br><p><strong>Kochin </strong>- Crowne Plaza Kochi</p><p>XI 641A Kundanoor Junction, NH-47 Bypass, Maradu, Ernakulam, Kerala - 682304</p><p>Waiting Hall - Onam</p><br><p><strong>Chennai </strong>- The Residency Towers</p><p>115, Sir Thyagaraya Road, Chennai - 600017.</p><p>Waiting Hall - Senator</p><br><p><strong>Mumbai </strong>- Supreme Holiday Resorts Pvt Ltd</p><p>Plot No L-2, Sector -19 Vashi, Navi Mumbai – 400703</p><p>Waiting Hall -&nbsp; Amantran</p><p></p></section>