Heavy equipment mechanical engineer Jobs

<p>We are seeking an experienced Mechanical Inspector to join our construction supervision team for major infrastructure projects in Abu Dhabi. The successful candidate will be responsible for inspecting and monitoring mechanical works to ensure compliance with approved drawings, project specifications, quality standards, contract requirements, and applicable health, safety, and environmental regulations. Key Responsibilities • Review contract documents, technical specifications, approved shop drawings, method statements, and project HSE requirements. • Inspect and monitor mechanical works associated with infrastructure projects, including water supply networks, sewerage and drainage systems, pumping stations, irrigation systems, utility pipelines, and other related mechanical installations. • Ensure contractor activities comply with project specifications, approved construction methods, quality standards, and applicable codes through regular inspections, testing, and verification. • Monitor contractor manpower, equipment deployment, work progress, and daily construction activities. • Maintain accurate site records, including: o Workforce and equipment utilization o Progress of works and work locations o Construction methods, materials, and installation activities • Verify material deliveries, storage, and installation to ensure compliance with approved specifications. • Carry out site inspections, measurements, testing, and commissioning verification as required. • Implement and follow instructions issued by the Resident Engineer (RE) and Assistant Resident Engineer (ARE). • Enforce project QA/QC procedures and ensure all works meet the required quality standards. • Monitor compliance with Abu Dhabi authority requirements, applicable UAE codes, and international engineering standards. • Ensure contractor compliance with Health, Safety, and Environmental (HSE) requirements and report any non-conformance or safety violations promptly. • Prepare inspection reports, non-conformance reports (NCRs), and daily site records as required.</p><p>Qualifications & Requirements • Bachelor's Degree or Diploma in Mechanical Engineering. • Minimum 8 years of experience in construction supervision of infrastructure projects. • At least 5 years of UAE consultancy experience, preferably on infrastructure projects in Abu Dhabi. • Strong experience in mechanical infrastructure works, including water transmission and distribution networks, sewerage systems, stormwater drainage, pumping stations, irrigation systems, and utility services. • Good knowledge of QA/QC procedures, HSE standards, and Abu Dhabi authority requirements. • Ability to read, interpret, and review engineering drawings, technical specifications, and contract documents. • Strong communication, coordination, documentation, and reporting skills. • Familiarity with inspection and testing procedures for mechanical infrastructure works.</p>

<p>Construction and industrial projects in Dubai offer an opportunity for a safety-conscious Rigger to assist with lifting operations, prepare loads for movement, and work closely with crane operators and site teams to ensure materials are handled safely and efficiently.</p> <p>Key Responsibilities<br /> Prepare and inspect lifting accessories before starting lifting activities.<br /> Select appropriate slings, shackles, hooks, chains, and other rigging equipment for assigned loads.<br /> Secure and balance loads correctly before lifting or moving them.<br /> Attach and detach loads under established lifting procedures.<br /> Provide clear hand signals or communication to crane and lifting equipment operators.<br /> Guide suspended loads safely through designated lifting paths.<br /> Check load weight, dimensions, lifting points, and stability before operations.<br /> Maintain safe distances from suspended loads and restricted lifting areas.<br /> Assist with positioning machinery, construction materials, steel structures, pipes, and other heavy items.<br /> Inspect rigging equipment for wear, damage, or defects and report concerns immediately.<br /> Keep lifting areas organized and free from unnecessary obstructions.<br /> Coordinate with crane operators, foremen, supervisors, and other site personnel.<br /> Follow approved lifting plans, method statements, and site safety requirements.<br /> Participate in toolbox talks and comply with PPE and workplace safety rules.<br /> Report unsafe conditions, equipment problems, or lifting incidents to the supervisor.<br /> Maintain proper care and storage of rigging tools and accessories.<br /> Requirements<br /> Previous experience as a Rigger in construction, industrial, marine, oil &amp; gas, or lifting operations is an advantage.<br /> Freshers with relevant rigging training or certification may also apply.<br /> Knowledge of basic rigging techniques and lifting procedures.<br /> Ability to identify common rigging equipment and understand its proper use.<br /> Familiarity with slings, shackles, hooks, chains, and lifting accessories.<br /> Good understanding of workplace safety and PPE requirements.<br /> Physically fit and capable of working in outdoor and demanding site conditions.<br /> Good communication and teamwork skills.<br /> Ability to follow instructions accurately and work around heavy equipment.<br /> Alert, responsible, and safety-conscious approach to work.<br /> Willingness to work shifts, overtime, weekends, or extended hours when required.<br /> UAE/GCC construction or industrial experience is an advantage.<br /> Valid Rigger certification or competency qualification is an advantage where applicable.</p> <p>Applicants with relevant qualifications, training, or experience may forward their updated CV to the Email: hr.lithiya@gmail.com</p>

<p>Construction and industrial projects in Dubai offer an opportunity for a safety-conscious Rigger to assist with lifting operations, prepare loads for movement, and work closely with crane operators and site teams to ensure materials are handled safely and efficiently.</p> <p>Key Responsibilities<br /> Prepare and inspect lifting accessories before starting lifting activities.<br /> Select appropriate slings, shackles, hooks, chains, and other rigging equipment for assigned loads.<br /> Secure and balance loads correctly before lifting or moving them.<br /> Attach and detach loads under established lifting procedures.<br /> Provide clear hand signals or communication to crane and lifting equipment operators.<br /> Guide suspended loads safely through designated lifting paths.<br /> Check load weight, dimensions, lifting points, and stability before operations.<br /> Maintain safe distances from suspended loads and restricted lifting areas.<br /> Assist with positioning machinery, construction materials, steel structures, pipes, and other heavy items.<br /> Inspect rigging equipment for wear, damage, or defects and report concerns immediately.<br /> Keep lifting areas organized and free from unnecessary obstructions.<br /> Coordinate with crane operators, foremen, supervisors, and other site personnel.<br /> Follow approved lifting plans, method statements, and site safety requirements.<br /> Participate in toolbox talks and comply with PPE and workplace safety rules.<br /> Report unsafe conditions, equipment problems, or lifting incidents to the supervisor.<br /> Maintain proper care and storage of rigging tools and accessories.<br /> Requirements<br /> Previous experience as a Rigger in construction, industrial, marine, oil &amp; gas, or lifting operations is an advantage.<br /> Freshers with relevant rigging training or certification may also apply.<br /> Knowledge of basic rigging techniques and lifting procedures.<br /> Ability to identify common rigging equipment and understand its proper use.<br /> Familiarity with slings, shackles, hooks, chains, and lifting accessories.<br /> Good understanding of workplace safety and PPE requirements.<br /> Physically fit and capable of working in outdoor and demanding site conditions.<br /> Good communication and teamwork skills.<br /> Ability to follow instructions accurately and work around heavy equipment.<br /> Alert, responsible, and safety-conscious approach to work.<br /> Willingness to work shifts, overtime, weekends, or extended hours when required.<br /> UAE/GCC construction or industrial experience is an advantage.<br /> Valid Rigger certification or competency qualification is an advantage where applicable.</p> <p>Applicants with relevant qualifications, training, or experience may forward their updated CV to the Email: hr.lithiya@gmail.com</p>

<ul><li>Develop detailed design drawings and calculations for fire sprinkler systems, standpipes, and fire pumps according to NFPA, local codes, and project specifications.</li><li>Conduct hydraulic calculations to ensure adequate water supply and pressure for fire suppression across various building types and occupancies.</li><li>Select and specify appropriate firefighting equipment, including sprinklers, nozzles, valves, and fire hydrants, ensuring compliance with standards and project requirements.</li><li>Coordinate fire protection system designs with architectural, structural, and MEP (Mechanical, Electrical, Plumbing) disciplines to ensure seamless integration.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Fire Protection Engineering, or a related field.</p></li><li><p>Professional Engineer (PE) license or Engineer-in-Training (EIT) certification is highly desirable.</p></li><li><p>Minimum of 5 years of progressive experience in designing fire suppression and alarm systems.</p></li></ul>

<p>The Role Our client is seeking a hands-on Engineering Lead / Principal Engineer to lead the architecture and delivery of complex enterprise platforms, automation and workflow-driven products. This is not a pure management role . You will lead a small engineering team while remaining hands-on across architecture, design, coding and production delivery. Key Responsibilities: Own architecture, system design, APIs, data models and technical delivery. Design complex workflows, state management and human approval processes. Build scalable enterprise integrations, including ERP/SAP where relevant. Lead engineers while remaining hands-on with code and technical reviews. Establish standards for security, testing, CI/CD, observability and reliability. Translate ambiguous business requirements into practical technical solutions. Identify appropriate opportunities to leverage AI/LLMs within enterprise workflows. Requirements: 10+ years software engineering experience. 4+ years at Staff, Principal, Lead Engineer or equivalent level. Strong backend and distributed-systems experience. Expertise in APIs, databases, microservices and enterprise integration. Experience with workflow-heavy or transaction-heavy platforms. Cloud, Kubernetes, containers and CI/CD experience. Strong security, reliability and observability mindset. Recent hands-on production engineering experience. Strong Advantage: Workflow/BPM or state-machine experience. Event-driven architecture. ERP/SAP integrations. Azure. LLM/GenAI or agentic AI in production. Financial services, government or other regulated environments.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10+ years software engineering experience.</li><li>4+ years at Staff, Principal, Lead Engineer or equivalent level.</li><li>Strong backend and distributed-systems experience.</li><li>Expertise in APIs, databases, microservices and enterprise integration.</li><li>Experience with workflow-heavy or transaction-heavy platforms.</li><li>Cloud, Kubernetes, containers and CI/CD experience.</li><li>Strong security, reliability and observability mindset.</li><li>Recent hands-on production engineering experience.</li><li>Strong Advantage: Workflow/BPM or state-machine experience.</li><li>Event-driven architecture.</li><li>ERP/SAP integrations.</li><li>Azure.</li><li>LLM/GenAI or agentic AI in production.</li><li>Financial services, government or other regulated environments.</li></ul>

<p>KEY RESPONSIBILITIES:</p><p>•Responsible for performing routine building maintenance tasks and Daily visual inspections on major data center equipment.</p><p>•Daily checking healthiness of all facilities equipment’s and keeping daily logs and records of all maintenance functions.</p><p>•Repair and maintenance work on a wide range of Mechanical, HVAC, Plumbing & ELV equipment.</p><p>•Perform ongoing preventive maintenance and repair work on facility Mechanical systems.</p><p>•Maintain, operate all Mechanical/HVAC related systems and associated equipment, Mechanical equipment, building management system.</p><p>Perform facility inspections and report on condition affecting operations</p><p>•Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.</p><p>Create the Job cards in CAFM (FSI) Mobile App as per Site requirements and close the Job cards which Engineer assigns.</p><p>•Responding promptly and efficiently to emergencies calls.</p><p>•Prepare and submit summary reports of conditions in buildings and recommend actions to be taken.</p><p>•Review and understand equipment and methods of operation, Mechanical systems, ELV system, HVAC system, and other trade related systems.</p><p>•Comply with all safety procedures and requirements</p><p>•Maintain essential stock of spare parts.</p><p>•Support any afterhours building needs and activities as required</p><p>•Attend training sessions and seminars.</p><p>•Other assigned tasks as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Good knowledge of Mechanical systems (Generators, Chillers, Pumps, Motors, Bearings)</p><p>•Good knowledge of cooling systems (HVACs, Chillers, VRV)</p><p>•Good Knowledge of ELV Systems (DDC, BMS, Access Control System, CCTV, Fire alarm system)</p><p>•Working knowledge of Mechanical systems and associated tools and equipment’s.</p><p>•Skill in installation, repair, and maintenance of all types of Mechanical system equipment’s and components.</p>

<p> Shift Mechanical Maintenance</p><ul><li><p>Lead and execute mechanical maintenance activities during assigned shifts in SMP 1.</p></li><li><p>Ensure availability and reliability of steel melting plant equipment.</p></li><li><p>Attend mechanical breakdowns promptly and restore equipment safely.</p></li><li><p>Coordinate maintenance activities according to production requirements.</p></li></ul><p>2. EAF & LRF Maintenance</p><ul><li><p>Carry out inspection and maintenance of mechanical equipment associated with EAF and LRF operations.</p></li><li><p>Inspect hydraulic systems, tilting mechanisms, cooling systems, gearboxes, bearings, pumps and associated equipment.</p></li><li><p>Identify abnormal conditions and take corrective action.</p></li><li><p>Support planned maintenance and major overhauling activities.</p></li></ul><p>3. CCM Maintenance</p><ul><li><p>Support mechanical maintenance of Continuous Casting Machine equipment.</p></li><li><p>Inspect and maintain rollers, drive mechanisms, bearings, cooling systems, hydraulic equipment and related mechanical assemblies.</p></li><li><p>Attend breakdowns affecting CCM operation and coordinate with Operations to restore equipment.</p></li></ul><p>4. Hydraulic & Pneumatic Systems</p><ul><li><p>Troubleshoot hydraulic and pneumatic systems.</p></li><li><p>Inspect hydraulic pumps, cylinders, valves, hoses, accumulators and power packs.</p></li><li><p>Identify leakage, pressure loss and abnormal operation.</p></li><li><p>Assist in hydraulic component replacement and testing.</p></li></ul><p>5. Preventive & Predictive Maintenance</p><ul><li><p>Execute preventive and predictive maintenance schedules.</p></li><li><p>Conduct routine inspection of critical SMP equipment.</p></li><li><p>Identify equipment deterioration and recommend corrective action before failure.</p></li><li><p>Ensure maintenance activities are completed according to approved procedures.</p></li></ul><p>6. Breakdown & Troubleshooting</p><ul><li><p>Lead mechanical breakdown response during the shift.</p></li><li><p>Diagnose equipment failures and determine the immediate corrective action.</p></li><li><p>Coordinate with Operations, Electrical and Instrumentation teams when required.</p></li><li><p>Escalate major or recurring failures to the Maintenance Supervisor/Engineer.</p></li><li><p>Participate in root-cause analysis of repeated breakdowns.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>5 years of hands-on mechanical maintenance experience</strong>, preferably in a <strong>Steel Melting Plant (SMP)</strong>.</p></li><li><p>Strong experience in preventive, predictive, corrective and breakdown maintenance of steel-making equipment.</p></li><li><p>Experience working in <strong>shift-based mechanical maintenance operations</strong>.</p></li><li><p>Experience supervising/leading Mechanical Technicians, Fitters and contract manpower.</p></li></ol>

<ol><li><p>Carry out daily mechanical maintenance activities in the <strong>Finishing Section</strong>.</p></li><li><p>Perform preventive and corrective maintenance of finishing mill equipment.</p></li><li><p>Attend mechanical breakdowns and restore equipment safely and efficiently.</p></li><li><p>Inspect equipment and identify abnormal conditions such as vibration, leakage, overheating, misalignment, and unusual noise.</p></li><li><p>Carry out dismantling, inspection, repair, assembly, and replacement of mechanical components.</p></li><li><p>Maintain and troubleshoot <strong>gearboxes, bearings, couplings, shafts, rollers, guides, conveyors, shears, straightening machines, and related equipment</strong>.</p></li><li><p>Assist with maintenance of cooling beds, roller tables, transfer systems, bundling and material-handling equipment.</p></li><li><p>Carry out alignment, leveling, lubrication, and mechanical adjustment activities.</p></li><li><p>Support planned shutdowns, major maintenance, overhauling, and equipment modification activities.</p></li><li><p>Use mechanical drawings, equipment manuals, and maintenance instructions when carrying out repairs.</p></li><li><p>Check hydraulic and pneumatic equipment and coordinate with the relevant specialists when required.</p></li><li><p>Maintain tools, tackles, lifting equipment, and maintenance spares in proper condition.</p></li><li><p>Coordinate with Production, Electrical, Instrumentation, and Operations teams during maintenance activities.</p></li><li><p>Record maintenance work, breakdown details, inspections, and completed jobs.</p></li><li><p>Support root-cause analysis of recurring mechanical failures.</p></li><li><p>Maintain good housekeeping in the finishing and maintenance areas.</p></li><li><p>Follow all SOPs, PTW, LOTO, PPE, and plant HSE requirements.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>5–7 years of mechanical maintenance experience</strong> in a steel plant, rolling mill, or heavy industrial environment.</p></li><li><p>Finishing Mill / Finishing Section experience is strongly preferred.</p></li><li><p>Experience in preventive, corrective, breakdown, and shutdown maintenance.</p></li><li><p>Candidates with Bar Mill, Rebar Mill, Wire Rod Mill, Section Mill, or Long Product Mill experience will be preferred.</p></li></ol>

<ol><li><p>Carry out daily mechanical maintenance activities in the <strong>Finishing Section</strong>.</p></li><li><p>Perform preventive and corrective maintenance of finishing mill equipment.</p></li><li><p>Attend mechanical breakdowns and restore equipment safely and efficiently.</p></li><li><p>Inspect equipment and identify abnormal conditions such as vibration, leakage, overheating, misalignment, and unusual noise.</p></li><li><p>Carry out dismantling, inspection, repair, assembly, and replacement of mechanical components.</p></li><li><p>Maintain and troubleshoot <strong>gearboxes, bearings, couplings, shafts, rollers, guides, conveyors, shears, straightening machines, and related equipment</strong>.</p></li><li><p>Assist with maintenance of cooling beds, roller tables, transfer systems, bundling and material-handling equipment.</p></li><li><p>Carry out alignment, leveling, lubrication, and mechanical adjustment activities.</p></li><li><p>Support planned shutdowns, major maintenance, overhauling, and equipment modification activities.</p></li><li><p>Use mechanical drawings, equipment manuals, and maintenance instructions when carrying out repairs.</p></li><li><p>Check hydraulic and pneumatic equipment and coordinate with the relevant specialists when required.</p></li><li><p>Maintain tools, tackles, lifting equipment, and maintenance spares in proper condition.</p></li><li><p>Coordinate with Production, Electrical, Instrumentation, and Operations teams during maintenance activities.</p></li><li><p>Record maintenance work, breakdown details, inspections, and completed jobs.</p></li><li><p>Support root-cause analysis of recurring mechanical failures.</p></li><li><p>Maintain good housekeeping in the finishing and maintenance areas.</p></li><li><p>Follow all SOPs, PTW, LOTO, PPE, and plant HSE requirements.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>5–7 years of mechanical maintenance experience</strong> in a steel plant, rolling mill, or heavy industrial environment.</p></li><li><p>Finishing Mill / Finishing Section experience is strongly preferred.</p></li><li><p>Experience in preventive, corrective, breakdown, and shutdown maintenance.</p></li><li><p>Candidates with Bar Mill, Rebar Mill, Wire Rod Mill, Section Mill, or Long Product Mill experience will be preferred.</p></li></ol>

<p>Technopole Industries L.L.C. is seeking an experienced Production Engineer to lead daily machine shop operations for street lighting pole fabrication. This is a hands-on supervisory role responsible for output, dimensional accuracy, and team discipline on the shop floor.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Plan, coordinate, and supervise machine shop operations: plasma cutting, laser cutting, taper cutting, plate bending, and seam welding.</p></li><li><p>Meet daily/weekly output targets aligned to production schedules and delivery commitments.</p></li><li><p>Interpret fabrication drawings, cut sheets, and dimensional specs across pole profiles.</p></li><li><p>Monitor MS plate/coil material utilization, minimize scrap, and maintain consumption logs.</p></li><li><p>Coordinate with Production Planning, QC, Procurement, and Assembly for workflow continuity.</p></li><li><p>Supervise setup, operation, and basic maintenance of machines.</p></li><li><p>Verify dimensional accuracy during different stages of production</p></li><li><p>Prepare daily production reports, machine utilization logs, and shift handover notes.</p></li><li><p>Optimize job sequencing and machine loading to eliminate idle time and maximize throughput per shift.</p></li><li><p>Enforce HSE standards, safe work practices, and PPE compliance.</p></li><li><p>Drive process improvements to reduce cycle time per pole and improve first-pass dimensional acceptance rate.</p></li></ul><p><strong>Required Qualifications:</strong></p><ul><li><p>Bachelor’s degree in mechanical/production/industrial engineering.</p></li><li><p>Minimum 2-5 years' experience in production operations within structural steel/pole/pipe fabrication or similar heavy fabrication industry.</p></li></ul><p><strong>Required Skills & Competencies:</strong></p><ul><li><p>Strong understanding of MS plate properties, bending allowances, and forming tolerances for structural pole profiles.</p></li><li><p>Ability to read and interpret fabrication drawings, cut plans, and dimensional tolerances.</p></li><li><p>Machine operation and basic troubleshooting competency.</p></li><li><p>Production planning experience</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Experience in Production, Production Planning.</p></li><li><p>Experience in steel fabrication is an advantage</p></li></ul>

<p>Technopole Industries L.L.C. is seeking an experienced Production Engineer to lead daily machine shop operations for street lighting pole fabrication. This is a hands-on supervisory role responsible for output, dimensional accuracy, and team discipline on the shop floor.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Plan, coordinate, and supervise machine shop operations: plasma cutting, laser cutting, taper cutting, plate bending, and seam welding.</p></li><li><p>Meet daily/weekly output targets aligned to production schedules and delivery commitments.</p></li><li><p>Interpret fabrication drawings, cut sheets, and dimensional specs across pole profiles.</p></li><li><p>Monitor MS plate/coil material utilization, minimize scrap, and maintain consumption logs.</p></li><li><p>Coordinate with Production Planning, QC, Procurement, and Assembly for workflow continuity.</p></li><li><p>Supervise setup, operation, and basic maintenance of machines.</p></li><li><p>Verify dimensional accuracy during different stages of production</p></li><li><p>Prepare daily production reports, machine utilization logs, and shift handover notes.</p></li><li><p>Optimize job sequencing and machine loading to eliminate idle time and maximize throughput per shift.</p></li><li><p>Enforce HSE standards, safe work practices, and PPE compliance.</p></li><li><p>Drive process improvements to reduce cycle time per pole and improve first-pass dimensional acceptance rate.</p></li></ul><p><strong>Required Qualifications:</strong></p><ul><li><p>Bachelor’s degree in mechanical/production/industrial engineering.</p></li><li><p>Minimum 2-5 years' experience in production operations within structural steel/pole/pipe fabrication or similar heavy fabrication industry.</p></li></ul><p><strong>Required Skills & Competencies:</strong></p><ul><li><p>Strong understanding of MS plate properties, bending allowances, and forming tolerances for structural pole profiles.</p></li><li><p>Ability to read and interpret fabrication drawings, cut plans, and dimensional tolerances.</p></li><li><p>Machine operation and basic troubleshooting competency.</p></li><li><p>Production planning experience</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Solid work knowledge is an advantage</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electrical Construction Engineer is responsible for supervising and coordinating day-to-day electrical construction activities to ensure all work is executed in accordance with approved drawings, project specifications, quality standards, and client requirements. The role involves overseeing the installation of major substation equipment, including Power Transformers, GIS/AIS equipment, Circuit Breakers, Disconnectors, Earthing Switches, CTs, VTs/CVTs, Surge Arresters, Control and Protection Panels, and STATCOM systems where applicable. The engineer monitors equipment erection, alignment, cable laying, termination, gland installation, grounding systems, and lightning protection works, ensuring compliance with manufacturer recommendations and project standards. Responsibilities also include conducting inspections in line with approved Method Statements and Inspection &amp; Test Plans (ITPs), coordinating with QA/QC teams and clients for inspections, closing punch points, and maintaining comprehensive quality records and installation checklists. The position supports pre-commissioning and commissioning activities, including testing of transformers, GIS/AIS equipment, protection relays, control systems, SCADA systems, and auxiliary systems while ensuring all prerequisites are completed prior to energization. The engineer is responsible for enforcing HSE requirements, conducting toolbox talks, monitoring Permit-to-Work (PTW) compliance, and ensuring the safe execution of high-voltage activities. Additionally, the role involves verifying materials received on site, monitoring material utilization, reporting shortages or damages, and coordinating with procurement and warehouse teams. Close coordination with Construction Managers, Planning Engineers, QA/QC Engineers, Commissioning Engineers, civil and mechanical teams, clients, consultants, and vendors is essential to resolve site issues and interface conflicts. The engineer maintains daily progress reports, installation records, punch lists, NCR logs, and supports the preparation of as-built documentation. Furthermore, the role includes monitoring project progress against approved schedules, identifying potential delays, supporting recovery plans, attending client and consultant meetings, and coordinating vendor supervision during installation and testing activities to ensure successful and timely project completion.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electrical Construction Engineer is responsible for supervising and coordinating day-to-day electrical construction activities to ensure all work is executed in accordance with approved drawings, project specifications, quality standards, and client requirements. The role involves overseeing the installation of major substation equipment, including Power Transformers, GIS/AIS equipment, Circuit Breakers, Disconnectors, Earthing Switches, CTs, VTs/CVTs, Surge Arresters, Control and Protection Panels, and STATCOM systems where applicable. The engineer monitors equipment erection, alignment, cable laying, termination, gland installation, grounding systems, and lightning protection works, ensuring compliance with manufacturer recommendations and project standards. Responsibilities also include conducting inspections in line with approved Method Statements and Inspection &amp; Test Plans (ITPs), coordinating with QA/QC teams and clients for inspections, closing punch points, and maintaining comprehensive quality records and installation checklists. The position supports pre-commissioning and commissioning activities, including testing of transformers, GIS/AIS equipment, protection relays, control systems, SCADA systems, and auxiliary systems while ensuring all prerequisites are completed prior to energization. The engineer is responsible for enforcing HSE requirements, conducting toolbox talks, monitoring Permit-to-Work (PTW) compliance, and ensuring the safe execution of high-voltage activities. Additionally, the role involves verifying materials received on site, monitoring material utilization, reporting shortages or damages, and coordinating with procurement and warehouse teams. Close coordination with Construction Managers, Planning Engineers, QA/QC Engineers, Commissioning Engineers, civil and mechanical teams, clients, consultants, and vendors is essential to resolve site issues and interface conflicts. The engineer maintains daily progress reports, installation records, punch lists, NCR logs, and supports the preparation of as-built documentation. Furthermore, the role includes monitoring project progress against approved schedules, identifying potential delays, supporting recovery plans, attending client and consultant meetings, and coordinating vendor supervision during installation and testing activities to ensure successful and timely project completion.</p> </div>

<p>Transportation of staff, delivery of materials, Invoice submission, material purchase. </p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>3-5 Years experience as a Bus driver and light vehicle driver.</p></li><li><p>Good knowledge of UAE - Abu Dhabi road.</p></li><li><p>Knowledge of English & Hindi (Read & write)</p></li><li><p>Valid UAE driving license 3 & 6 must (Light Vehicle & Heavy Bus)</p></li></ol>

<strong>Company Description</strong> Azizi Developments is a leading real estate developer based in Dubai, United Arab Emirates, with over 45,000 homes delivered to buyers from more than 100 nationalities. The company is recognized for modern luxury projects and a strong focus on transparency and customer-centric service. Its portfolio includes residential and commercial properties in Dubai’s most desirable communities. With around 150,000 units under construction, Azizi is known for landmark developments such as the world’s second-tallest skyscraper, Burj Azizi, and large master-planned communities including Azizi Riviera, Azizi Venice, and Azizi Milan. Azizi offers professionals the opportunity to contribute to high-profile, large-scale projects in a dynamic, fast-growing environment.<br><strong>Role Description</strong> The Asst. Formwork Design Engineer is a full-time, on-site role based in Dubai, United Arab Emirates. This position supports the design and detailing of formwork systems for concrete structures across Azizi’s residential and commercial projects, ensuring safety, efficiency, and compliance with engineering standards. Day-to-day responsibilities include preparing formwork drawings and calculations, coordinating with structural engineers and site teams, and assisting in selecting suitable materials and equipment. The role also involves reviewing construction plans, optimizing formwork solutions for cost and constructability, and providing technical support during site execution and inspections. The Asst. Formwork Design Engineer will maintain documentation, adhere to company quality and safety procedures, and collaborate with project stakeholders to meet timelines and performance targets.<br><strong>Qualifications<br></strong> <ul><li>Demonstrated knowledge of formwork systems and applications, including experience with Formwork and Flatwork in concrete construction.</li><li>Practical understanding of Carpentry and Power Tools relevant to formwork installation and detailing.</li><li>Experience working around or coordinating with Heavy Equipment used in construction and concrete works.</li><li>Bachelor’s degree in Civil Engineering or a related discipline; relevant technical certifications in formwork or construction engineering are an advantage.</li><li>Ability to read and interpret structural drawings, prepare basic design calculations, and use CAD or BIM software for detailing.</li><li>Strong attention to safety, quality, and compliance with local building codes and engineering standards.</li><li>Effective communication and teamwork skills, with the ability to collaborate with site engineers, contractors, and project managers.</li><li>Previous experience in building or infrastructure projects in the Middle East is preferred but not mandatory.</li></ul>

<p>Waagner Biro Bridge Services has been a trusted leader in the UAE construction industry for over 50 years. Headquartered in Dubai, the company specializes in delivering innovative engineering and construction solutions for both government and private sector clients. Backed by a highly skilled team of civil, mechanical, structural, and electrical engineers, Waagner Biro Bridge Services provides comprehensive services that span design, construction, and ongoing maintenance. Known for its integrated approach and commitment to quality, the company has set a benchmark for excellence in construction engineering across the region.<br><br></p><p>For more information, visit: https://waagnerbiro-bridgeservices.com<br><br><br><br></p><strong>Job Description<br><br></strong><p>The Shovel Operator will be responsible for operating and maintaining heavy equipment (shovel) efficiently and safely at various project sites, including marine and beach operations. The ideal candidate must ensure smooth equipment operation while adhering to safety and operational standards.<br><br></p><p><strong>Key Responsibilities:<br><br></strong></p><ul><li><p>Operate the shovel for loading, excavation, and material handling activities as instructed.<br><br></p></li><li><p>Ensure proper functioning of the machine through daily pre-start inspections and basic maintenance checks.<br><br></p></li><li><p>Coordinate with site supervisors and the plant team to ensure timely completion of assigned work.<br><br></p></li><li><p>Follow all safety procedures and company policies during operation.<br><br></p></li><li><p>Report any mechanical issues, damages, or incidents immediately to the Plant Manager.<br><br></p></li><li><p>Maintain cleanliness and operational readiness of the equipment at all times.<br><br></p></li><li><p>Support other equipment or site activities as directed by the Plant Manager.<br><br><br><br><br></p></li></ul><strong>Qualifications<br><br></strong><ul><li><p>A valid <strong>UAE Shovel Operator (Heavy Tractor)</strong> license is essential.<br><br></p></li><li><p>Must be able to <strong>read, write, and speak English</strong> to understand work instructions.<br><br></p></li><li><p><strong>Driving License No. 3 (LTV)</strong> will be considered an added advantage.<br><br></p></li><li><p>Knowledge of safe work practices and site safety standards.<br><br></p></li><li><p>Ability to work in marine or beach site environments.<br><br><br></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><strong>Electro-Mechanic Technician</strong><p>We are hiring experienced <strong>Electro-Mechanic Technicians</strong> for a leading industrial company in <strong>Saudi Arabia</strong>. The ideal candidate will be responsible for the operation, inspection, preventive maintenance, troubleshooting, and repair of electro-mechanical and utility systems to ensure maximum equipment reliability and plant efficiency.</p><br><br><br>Key Responsibilities<ul><li><p>Perform preventive, predictive, and corrective maintenance on electro-mechanical equipment.</p><br><br></li><li><p>Inspect, troubleshoot, and repair electrical and mechanical systems.</p><br><br></li><li><p>Maintain and service industrial utility equipment.</p><br><br></li><li><p>Operate and maintain industrial chillers, air compressors, pumps, HVAC support systems, and utility distribution systems.</p><br><br></li><li><p>Perform maintenance on water treatment systems and water supply networks.</p><br><br></li><li><p>Diagnose equipment failures and implement corrective actions to minimize downtime.</p><br><br></li><li><p>Execute maintenance activities using SAP PM (Plant Maintenance).</p><br><br></li><li><p>Read and interpret electrical and mechanical drawings and technical manuals.</p><br><br></li><li><p>Coordinate with contractors during maintenance activities when required.</p><br><br></li><li><p>Ensure compliance with safety regulations and company maintenance standards.</p><br><br></li><li><p>Maintain maintenance records and prepare service reports.</p><br><br></li></ul><br>Requirements <br>Requirements<ul><li><p>Minimum <strong>5 years</strong> of experience in Electro-Mechanical Maintenance.</p><br><br></li><li><p><strong>5-10 years</strong> of overall industrial maintenance experience is preferred.</p><br><br></li><li><p>Minimum <strong>3 years</strong> of hands-on experience with industrial utility equipment.</p><br><br></li><li><p>Diploma in Mechanical, Electrical, Electro-Mechanical Engineering, or a related field.</p><br><br></li><li><p>Trade Certification is preferred but not mandatory.</p><br><br></li><li><p>Experience using <strong>SAP </strong>is mandatory.</p><br><br></li><li><p>Good English communication skills.</p><br><br></li><li><p>Experience in <strong>Pipe Mills</strong> or other heavy industrial/manufacturing plants is preferred.</p><br><br></li></ul><br> </div>

<p>MEP Engineer – Landscape, Swimming Pool & Water Features</p><p>Perfect Technical Works and Landscaping LLC is seeking an experienced <strong>MEP Engineer</strong> with strong knowledge of <strong>landscaping, swimming pool, irrigation, and water feature MEP systems</strong>. The candidate will be responsible for MEP design, coordination, site execution, testing, and handover.</p><p>Key ResponsibilitiesMEP Design & Coordination</p><ul><li><p>Prepare and review <strong>MEP drawings, designs, and technical documents</strong> for landscape, swimming pool, and water feature projects.</p></li><li><p>Design and coordinate mechanical, electrical, plumbing, and drainage systems.</p></li><li><p>Design and coordinate <strong>pool pumps, filtration systems, piping, drainage, and equipment</strong>.</p></li><li><p>Prepare MEP requirements for <strong>fountains, waterfalls, ponds, and other water features</strong>.</p></li><li><p>Coordinate MEP works with <strong>landscape, structural, architectural, and civil drawings</strong>.</p></li></ul><p>Site Execution</p><ul><li><p>Monitor MEP installation works and ensure compliance with approved drawings and specifications.</p></li><li><p>Conduct site inspections and resolve technical issues.</p></li><li><p>Coordinate with Project Managers, Consultants, Subcontractors, and site teams.</p></li><li><p>Review <strong>shop drawings, material submittals, and technical submissions</strong>.</p></li><li><p>Support testing, commissioning, and final handover.</p></li></ul><p>Documentation</p><ul><li><p>Prepare and review <strong>shop drawings, as-built drawings, method statements, and technical reports</strong>.</p></li><li><p>Assist with BOQs, material selection, and technical evaluations.</p></li><li><p>Maintain records of approvals, inspections, and project documents.</p></li><li><p>Ensure MEP works comply with project requirements and UAE standards.</p></li></ul><p>Pool & Water Feature Systems</p><ul><li><p>Coordinate <strong>pumps, filtration systems, piping, nozzles, lighting, control systems, and drainage</strong>.</p></li><li><p>Review equipment selection and ensure compatibility with project requirements.</p></li><li><p>Troubleshoot MEP issues during installation and operation.</p></li></ul><p>Requirements & Qualifications</p><ul><li><p>Bachelor’s Degree in <strong>Mechanical, Electrical, or related Engineering field</strong>.</p></li><li><p>Minimum <strong>5 years of UAE experience</strong> as an MEP Engineer.</p></li><li><p>Strong experience in <strong>landscaping, swimming pools, water features, and related MEP works</strong>.</p></li><li><p>Good knowledge of <strong>pool MEP systems, filtration, pumps, drainage, and electrical coordination</strong>.</p></li><li><p>Experience with <strong>fountains, waterfalls, ponds, and water features</strong> is preferred.</p></li><li><p>Proficiency in <strong>AutoCAD and MEP design software</strong>.</p></li><li><p>Ability to read and interpret engineering drawings and specifications.</p></li><li><p>Good coordination, communication, problem-solving, and site management skills.</p></li><li><p>Knowledge of <strong>UAE construction standards and authority requirements</strong>.</p></li><li><p><strong>UAE Driving License is preferred.</strong></p></li><li><p><strong>Immediate joiners are prefer</strong></p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>should have landscape experience </p>

DRONE OPERATORFacade & High-Rise Cleaning???? Location: Abu Dhabi, UAE – Project Sites???? Department: Operations???? Employment Type: Full-Time Salary With Valid Drone Licence: AED 5,000 – 6,000/month Without Valid Drone Licence: AED 2,500 – 3,000/month<br>Role Overview Our client is seeking a Drone Cleaning Technician to perform drone-based cleaning operations across project sites in the UAE. The role involves operating commercial drones for cleaning building facades, glass surfaces, solar panels, roofs, and other exterior structures, while ensuring strict compliance with operational and safety procedures.<br>Key Responsibilities Drone Operations Operate drone-based cleaning systems safely and efficiently. Conduct pre-flight and post-flight inspections. Perform drone cleaning of facades, glass, solar panels, roofs, and exterior surfaces. Monitor weather and site conditions before operations. Follow approved flight plans, operational procedures, and company SOPs. Maintain accurate flight logs and operational records. Site & Safety Operations Conduct site inspections and risk assessments before commencing work. Coordinate with clients, consultants, and site representatives. Establish required safety zones and barricades. Ensure necessary permits and approvals are in place before operations. Follow all company HSE and safety procedures. Use appropriate PPE and immediately report incidents, near misses, or unsafe conditions. Ensure the safety of the public, property, clients, and project personnel. Equipment Maintenance Inspect and maintain drones, batteries, controllers, pumps, hoses, nozzles, and accessories. Perform routine preventive maintenance. Identify and report equipment faults. Assist with basic mechanical and electrical troubleshooting. Ensure equipment remains in safe working condition. Documentation Complete daily work and operational reports. Maintain drone flight logs. Submit before-and-after photographs. Prepare service completion reports. Maintain equipment inspection and maintenance records. Qualifications & Experience Diploma or Bachelor's Degree in Engineering, Aviation, Mechanical, Electrical, or a related field preferred. Minimum 2 years of commercial drone operating experience preferred. Experience in drone-based facade cleaning, high-rise cleaning, inspections, or industrial drone operations is an advantage. Experience with cleaning systems and pressure-washing equipment preferred. Valid UAE Driving Licence is an advantage. Drone Licence Requirements Candidates with a valid UAE drone/remote pilot licence or certification will be given preference. Candidates without a currently valid drone licence may also be considered based on relevant drone operating experience and technical skills. Candidates must be willing and eligible to meet applicable UAE requirements for commercial drone operations. Required Skills Strong drone piloting and flight-planning skills. Knowledge of drone operational and safety procedures. Site evaluation and risk-assessment skills. Basic mechanical and electrical troubleshooting. Strong attention to detail and commitment to safety. Good communication and teamwork skills. Comfortable working outdoors and at high-rise project locations. Additional Requirements Willing to travel across the UAE for project assignments. Comfortable working at commercial and high-rise sites. Flexible to work weekends, night shifts, or emergency call-outs when required. Able to work according to project schedules and operational requirements.<br>Key Performance Indicators Compliance with applicable aviation, HSE, and company safety requirements. Zero preventable flight incidents. Timely completion of assigned projects. Consistent cleaning quality. Proper maintenance and handling of drone equipment. Accurate reporting and documentation. High client satisfaction.???? Interested candidates can share their updated CV: jobs@elitehrconsultancy.com???? Whats App: +971 55 122 6879

Job Summary<br><br>We are looking for a 2D Electrical Draftsman with UAE building construction experience to prepare, update, and coordinate electrical drawings for MEP projects.<br><br>The candidate should have good knowledge of electrical building services and strong Auto CAD drafting skills.<br><br>Key Responsibilities<br><br>Prepare and update 2D Electrical Shop Drawings, Layouts, Sections, Details, and As-Built Drawings using Auto CAD. Prepare drawings for LV Power Systems, including MDB, SMDB, DBs, cable trays, conduits, wiring, and containment. Prepare Lighting and Emergency Lighting Layouts, including lighting fixtures, switches, controls, and related wiring. Prepare Small Power and Equipment Power Layouts, including sockets, isolators, and connections to mechanical and other equipment. Prepare and coordinate drawings for Earthing and Lightning Protection Systems. Prepare ELV drawings, including Fire Alarm, CCTV, Access Control, Data/Telephone, Intercom, SMATV, and other low-current systems as required. Prepare Single Line Diagrams, Schematic Diagrams, DB Schedules, Cable Schedules, and related electrical details. Prepare MEP Coordination Drawings and coordinate electrical services with HVAC, plumbing, architectural, structural, and other disciplines. Review architectural and MEP drawings to identify conflicts and ensure proper routing, equipment locations, clearances, and installation requirements. Incorporate approved design changes, RFIs, site instructions, and coordination updates into electrical drawings. Coordinate with Electrical Engineers, BIM Engineers, site teams to resolve drawing-related issues. Prepare drawings based on site conditions and actual installation for as-built documentation. Ensure drawings comply with project standards, specifications, authority requirements, and approved design. Maintain proper drawing revisions, references, and document control as per project requirements.<br><br>Requirements<br><br>Diploma / Technical qualification in Electrical Engineering or Electrical Drafting.8 years of relevant experience in electrical drafting, preferably in UAE building construction projects. Strong knowledge of Auto CAD 2D and electrical drafting practices. Good understanding of Electrical Power, Lighting, Small Power, ELV, Fire Alarm, Earthing, and Lightning Protection systems. Experience preparing Electrical Shop Drawings and MEP Coordination Drawings. Ability to read and understand Electrical, Architectural, Structural, and MEP drawings. Knowledge of UAE building construction practices and electrical installation requirements. Ability to work independently and coordinate effectively with engineers, site teams, and other MEP disciplines. Good attention to detail, drawing accuracy, and revision control. UAE building construction experience is preferred.<br><br>Pay: AED7,000.00 - AED12,000.00 per month