Heavy equipment mechanical engineer Jobs
17108 Jobs Found
RTC-1 Employment Services
UAE - Abu Dhabi
<p>Position Title: Certified Crane Operator / Heavy Equipment Operator
Employment Type: Full Time
Salary: up to 5,500 AED inclusive depending on experience and qualifications
Job Location: Al Dhafra, Abu Dhabi
About the Client:
A highly trusted facility management team base in Abu Dhabi
Job Description:
§ Safely operate mobile cranes for lifting, loading, unloading, shifting, and positioning materials.
§ Perform daily pre-operation inspections and immediately report any mechanical issues.
§ Execute lifting activities according to approved lifting plans, and HSE requirements.
§ Coordinate closely with riggers, supervisors, and other site personnel during operations.</p><p>Qualifications:
§ Valid UAE-recognized Crane Operator certification.
§ Strong knowledge of load charts, safe lifting practices, hand signals, equipment inspections, and HSE procedures.
§ Minimum 1 year relevant experience operating cranes/heavy equipment.
§ Must be willing to work/site-based in Al Dhafra, Abu Dhabi.</p>
UAE - Abu Dhabi
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<b>Job Description</b><br>Stantec is looking to hire a Mechanical Engineer for a Sewage Treatment Plant in Abu Dhabi.<br>This role is for a project where the authority in Dubai is requiring the rehabilitation of an existing Sewage Treatment Plant (STP) to enable it to perform at its highest possible efficiency and to extend the plant to be able to receive and treat efficiently up to<br>around 435,000 m3 /day. The selected candidate shall have extensive experience working in local sewage treatment plant facilities along with a proven ability to manage and supervise the construction works and optimization of the operation process within the existing STP in accordance with the specification.<br>Rehabilitation / Repairing of Civil Works,<br>Extension of the Plant to around 175,000 m3/Day and<br>Rehabilitation of existing 260,000m3/Day STP<br><br><b>Qualifications</b><br>The Mechanical Engineer must have relevant degree from recognized university and must have thorough knowledge and work experience not less than 15 years in the equipment and control system within the sewage treatment plant. The candidate must also have full and complete knowledge of existing work system of sewage treatment plants. <br>• The candidate must also have thorough knowledge and work experience with different types of mechanical electrical equipment and instruments within the STPs and pumping station works he must also have thorough knowledge and experience in the design of infrastructure works.<br>• the candidate must have work experience in dealing with emergency works he must be able to deal with public and coordinate with various Dubai Municipality and other infrastructure authorities projects.<br>• strong computer skills in Microsoft Word excel and Primavera 3.<br>• Excellent written and verbal communication skills in English.<br>• capacity to make a decision.<br>#LI-MiddleEast<br> </div>
Sembol Construction
UAE - Dubai
<p>We are seeking a highly skilled and experienced Mechanical Chief Engineer to lead and oversee all mechanical engineering aspects of our construction projects in Dubai. The ideal candidate will ensure mechanical systems are designed, installed, and maintained to the highest standards, contributing to the successful delivery of high-quality construction projects.
Responsibilities:
- Lead the mechanical engineering team in the design, implementation, and maintenance of mechanical systems for construction projects.
- Review and approve mechanical engineering designs, drawings, and specifications to ensure compliance with project requirements and industry standards.
- Coordinate with project managers, architects, and other engineering disciplines to ensure integrated and efficient project delivery.
- Oversee the installation, testing, and commissioning of mechanical systems on-site to ensure adherence to safety and quality standards.
- Develop and implement mechanical engineering policies, procedures, and best practices to optimize project performance.
- Conduct technical assessments, troubleshooting, and problem-solving related to mechanical systems.
- Manage procurement of mechanical equipment and materials, ensuring quality and cost-effectiveness.
- Mentor and train junior engineers and technical staff to foster professional development and knowledge sharing.
- Ensure compliance with local codes, regulations, and environmental standards related to mechanical engineering.
- Prepare and present technical reports, progress updates, and project documentation to stakeholders.</p><p>- Bachelor’s degree in Mechanical Engineering or a related field;
- Professional engineering license or certification is highly desirable.
- Minimum of 10 years of experience in mechanical engineering within the construction industry, with at least 5 years in a leadership or chief engineer role.
- Strong knowledge of mechanical systems design, including HVAC, plumbing, fire protection, and MEP coordination.
- Proven experience in managing complex construction projects in a fast-paced environment.
- Excellent leadership, communication, and interpersonal skills with the ability to collaborate effectively across multidisciplinary teams.
- Proficient in relevant engineering software and tools such as AutoCAD, Revit, and project management software.
- Knowledge of UAE construction codes, regulations, and best practices.
- Ability to work under pressure and meet tight deadlines while ensuring quality standards.
- Strong problem-solving skills and attention to detail with a commitment to safety and sustainability.</p>
Confidential
UAE - Dubai
<p>A reputable company is looking for MEP Supervisor to perform the following duties<br />
Supervise Mechanical, Electrical, and Plumbing (MEP) installation works on construction projects.<br />
Coordinate with engineers, contractors, and subcontractors to ensure project requirements are met.<br />
Monitor site activities to ensure work is completed according to approved drawings, specifications, and project schedules.<br />
Inspect MEP systems and ensure compliance with quality standards and UAE regulations.<br />
Identify and resolve technical and site-related issues promptly.<br />
Prepare daily progress reports and maintain project documentation.<br />
Ensure strict compliance with health, safety, and environmental (HSE) standards.<br />
Conduct inspections, testing, and commissioning of MEP systems.</p>
<p>Applicants are required to complete the application form using the link below and upload their updated CV as part of the submission process.</p>
<p>Application Form: https://forms.gle/JFbbBvkE6HzdEwGa6</p>
UAE - Dubai
Job Location:<br><br>Dukes The Palm Dubai Hotel<br><br>NH Collection Hotels & Resorts showcases captivating hotels housed in authentic landmark buildings across Europe, Latin America, the Middle East, Asia, and beyond. Thoughtfully designed with an eclectic-elegant atmosphere, our hotels are built to evoke extraordinary feelings — paying great attention to stimulating details that create truly memorable moments.<br><br>We welcome business travellers, friends, and couples seeking premium service, and we craft experiences centred on wellbeing, gastronomy, culture, and pure indulgence. If you are passionate about creating those extraordinary moments for every guest, NH Collection is the place to do it. Feel the extraordinary.<br><br>The Cluster AC Technician is responsible for the operation, preventive maintenance, troubleshooting, and repair of air-conditioning, ventilation, and refrigeration systems across both hotel properties. The role ensures that HVAC systems operate safely, efficiently, and reliably while maintaining comfortable environmental conditions for guests and team members.<br><br>Key Responsibilities<br><br>Perform preventive and corrective maintenance of air-conditioning, ventilation, and refrigeration systems across both hotel properties. Inspect, troubleshoot, repair, and maintain HVAC equipment, including FCUs, AHUs, FAHUs, split AC units, package units, exhaust and ventilation systems. Diagnose mechanical and electrical faults related to HVAC systems and carry out necessary repairs. Monitor air-conditioning performance, temperature, airflow, pressure, and equipment condition to ensure efficient operation. Attend guest room and operational maintenance requests promptly and ensure issues are resolved with minimal disruption. Carry out regular cleaning and maintenance of filters, coils, drain lines, blowers, motors, belts, and other HVAC components. Check refrigerant levels, identify leaks, and carry out refrigerant charging in accordance with applicable safety and environmental requirements. Maintain chilled-water systems and associated components within the technician's scope of responsibility. Assist in troubleshooting BMS-related HVAC alarms and coordinate with the appropriate Engineering team when required. Conduct routine inspections of plant rooms, mechanical areas, guest rooms, public areas, restaurants, offices, and back-of-house facilities. Identify recurring faults and recommend corrective or preventive actions to Engineering Management. Support energy conservation initiatives by ensuring HVAC equipment operates efficiently and identifying opportunities to reduce energy consumption. Complete assigned preventive maintenance schedules and work orders within the required timeframe. Maintain accurate records of inspections, maintenance activities, repairs, refrigerant usage, and spare parts consumed. Ensure tools, testing equipment, and machinery are maintained in safe and good working condition. Monitor HVAC spare parts and consumables and report replenishment requirements to the supervisor. Follow all hotel health and safety, fire and life safety, environmental, and Engineering procedures. Use appropriate Personal Protective Equipment (PPE) and follow Permit-to-Work and Lockout/Tagout procedures where applicable. Assist external HVAC contractors and service providers when required. Coordinate effectively with other Engineering colleagues and operational departments across both hotels. Respond promptly to HVAC emergencies and equipment breakdowns to minimize operational impact. Be flexible to work across both hotel properties based on operational requirements. Perform other reasonable duties assigned by the Cluster Chief Engineer or Engineering Management.<br><br>Qualifications & Requirements<br><br>Technical Diploma, ITI, vocational certificate, or equivalent qualification in Air Conditioning, Refrigeration, HVAC, Mechanical Engineering, or a related field. Minimum 2–3 years of experience as an AC/HVAC Technician, preferably within a hotel, resort, commercial building, or facilities management environment. Previous experience in a 4- or 5-star hotel environment in the UAE or GCC is an advantage. Strong knowledge of HVAC and refrigeration systems, including FCUs, AHUs, FAHUs, split and package AC units. Good understanding of chilled-water systems, ventilation systems, compressors, motors, thermostats, valves, and controls. Ability to diagnose and troubleshoot mechanical and basic electrical faults related to HVAC equipment. Knowledge of refrigerant handling and applicable safety and environmental procedures. Ability to read and understand basic HVAC drawings, schematics, and technical manuals. Familiarity with Building Management Systems (BMS) is an advantage. Good knowledge of preventive maintenance procedures and safe working practices. Basic communication skills in English. Ability to work independently and as part of a multicultural Engineering team. Strong problem-solving skills and attention to detail. Physically fit and able to work in plant rooms, confined spaces, and at heights when required. Flexible to work shifts, weekends, public holidays, and emergency call-outs according to operational requirements.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!
UAE - Sharjah
As a Design Engineer (Primary), the person shall be capable of preparing, reviewing & executing Primary Engineering Activities for Substation Projects as per the direction of Design Lead (Primary). He must have good knowledge in Layout Engineering in Substation Projects. He shall facilitate the modellers in development of BIM 3D Model for Substations. As a Design Engineer (Primary), the person shall be required to design the layout of the substation and provide inputs to the draftsman for development of drawings.<br><br><strong>Key Responsibilities<br><br></strong><ul><li> Timely review of the drawings developed by the draftsman </li><li> Interact with Site Execution & Cluster teams for clarification w.r.t. the design of equipment </li><li> Coordinate with inter-disciplinary areas, inter-departmental checks (Civil & Structural, MEP & Instrumentation) for obtaining concurrence in design specifications </li><li> Ensure compliance to specification requirements </li><li> Review of drawings (2D & 3D) and Documentation conforming to Quality systems </li><li> Review of Vendor Offers and Documents </li><li> Pre-Tender Engineering including estimation of BOM (Bill of Materials) and Offer Reviews </li><li> Prepare design calculations of all Substation equipment (sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor) & other calculations (viz. Short circuit force, Sag tension etc.) </li><li> Reviewing of Bill of Material and comparing with the Tender Quantity <br><br></li></ul><strong>Software Skills Required<br><br></strong><ul><li> General awareness of Dialux, MS Office </li><li> Desirable awareness of ETAP, PSCAD & CYMGRD <br><br></li></ul><strong>Technical Expertise<br><br></strong><ul><li> The Design Engineer (Primary) is required to have complete understanding of Primary Engineering activities like SLD Preparation, Layout Engineering, Earthing, Cable Routing, Lighting, Lightning Protection, Cable Tray Routing etc. He should be capable of performing design & sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor, calculations (Short circuit force, Sag tension etc.). The Engineer is required to have knowledge on National and International Codes and Standards. In addition, the Design Engineer (Primary) should also have an overall understanding of the inter-disciplinary (Civil & Structural, Mechanical and Instrumentation) design aspects of electrical equipment. <br><br></li></ul><strong>Qualification & Experience<br><br></strong><ul><li> B.E. / B. Tech. in Electrical / Electrical & Electronics Engineering </li><li> 5 – 7 years (Must have experience in design aspects of Primary Engineering in Substations / Power Distribution Projects)</li></ul>
L&T Hydrocarbon Engineering
UAE - Sharjah
<p>As a Design Engineer (Primary), the person shall be capable of preparing, reviewing & executing Primary Engineering Activities for Substation Projects as per the direction of Design Lead (Primary). He must have good knowledge in Layout Engineering in Substation Projects. He shall facilitate the modellers in development of BIM 3D Model for Substations. As a Design Engineer (Primary), the person shall be required to design the layout of the substation and provide inputs to the draftsman for development of drawings. Key Responsibilities Timely review of the drawings developed by the draftsman Interact with Site Execution & Cluster teams for clarification w.r.t. the design of equipment Coordinate with inter-disciplinary areas, inter-departmental checks (Civil & Structural, MEP & Instrumentation) for obtaining concurrence in design specifications Ensure compliance to specification requirements Review of drawings (2D & 3D) and Documentation conforming to Quality systems Review of Vendor Offers and Documents Pre-Tender Engineering including estimation of BOM (Bill of Materials) and Offer Reviews Prepare design calculations of all Substation equipment (sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor) & other calculations (viz. Short circuit force, Sag tension etc.) Reviewing of Bill of Material and comparing with the Tender Quantity Software Skills Required: General awareness of Dialux, MS Office Desirable awareness of ETAP, PSCAD & CYMGRD Technical Expertise : The Design Engineer (Primary) is required to have complete understanding of Primary Engineering activities like SLD Preparation, Layout Engineering, Earthing, Cable Routing, Lighting, Lightning Protection, Cable Tray Routing etc. He should be capable of performing design & sizing calculations of Busbar, UPS, DG, LT Transformer, Earthing Conductor, calculations (Short circuit force, Sag tension etc.). The Engineer is required to have knowledge on National and International Codes and Standards. In addition, the Design Engineer (Primary) should also have an overall understanding of the inter-disciplinary (Civil & Structural, Mechanical and Instrumentation) design aspects of electrical equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>B.E. / B. Tech. in Electrical / Electrical & Electronics Engineering 3 7 years (Must have experience in design aspects of Primary Engineering in Substations / Power Distribution Projects)</p>
Confidential
UAE - Dubai
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><br></p><p>We are seeking an experienced and highly skilled Mechanic with expertise in hydraulic systems and diesel engines to lead maintenance and repair activities on a wide range of heavy equipment, vehicles, and machinery. The ideal candidate will demonstrate advanced troubleshooting skills, the ability to train junior mechanics, and a strong understanding of safety standards and preventative maintenance.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Diagnose, repair, and maintain diesel engines, hydraulic systems, transmissions, and related components on heavy equipment and vehicles.</p></li><li><p>Perform preventive and corrective maintenance to minimize downtime.</p></li><li><p>Troubleshoot complex mechanical, electrical, and hydraulic issues using diagnostic tools.</p></li><li><p>Lead and supervise junior mechanics and technicians; provide technical guidance and training.</p></li><li><p>Ensure all repairs and maintenance meet safety, quality, and operational standards.</p></li><li><p>Read and interpret hydraulic and engine schematics, manuals, and technical drawings.</p></li><li><p>Maintain accurate records of maintenance work, parts used, and time spent.</p></li><li><p>Coordinate with other departments to schedule maintenance without interrupting operations.</p></li><li><p>Monitor inventory of tools, parts, and supplies; initiate orders when necessary.</p></li><li><p>Comply with all company and regulatory safety protocols and environmental guidelines.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Key Skills and Competencies:</strong></p><ul><li>Education: High School Diploma or Technical School Certification in Mechanics, Diesel Technology, or equivalent.</li><li>Experience: Minimum 4 years of hands-on experience in diesel engine repair and hydraulic system maintenance.</li><li>In-depth knowledge of hydraulic systems, diesel engines, transmissions, and related components.</li><li>Proficiency in using diagnostic tools and reading schematics.</li><li>Familiarity with heavy machinery such as excavators, loaders, bulldozers, and trucks (depending on industry).</li><li>Valid driver’s license; CDL or equipment operator certification is a plus.</li><li>Excellent diagnostic and problem-solving abilities.</li><li>Good communication and teamwork.</li><li>Ability to work under pressure and meet deadlines.</li><li>Physically demanding – may require lifting heavy equipment, working in various positions, and operating in outdoor or workshop environments.</li><li>May involve overtime, weekends, or emergency callouts depending on operational needs.</li></ul><p></p></section>
UAE - Dubai
<p>HSE Engineer
Role Summary:
Supports the implementation of health and safety requirements on site by conducting regular inspections, monitoring work practices, and reinforcing compliance with approved procedures and risk controls.
Duties & Responsibilities:
- Conduct daily site inspections to identify unsafe acts, unsafe conditions, and potential hazards.
- Ensure that work is executed in line with method statements, risk assessments, and permit-to-work systems.
- Participate in toolbox talks and safety briefings and reinforce key safety messages with the workforce.
- Report hazards, near misses, and incidents and assist in implementing corrective actions.
- Verify that personal protective equipment is used and maintained appropriately.</p><p>Minimum Requirements:
- 3–7 years of HSE experience in civil construction projects.
Duties & Responsibilities:
- Conduct daily site inspections to identify unsafe acts, unsafe conditions, and potential hazards.
- Ensure that work is executed in line with method statements, risk assessments, and
permit-to-work systems.
- Participate in toolbox talks and safety briefings and reinforce key safety messages with the
workforce.
- Report hazards, near misses, and incidents and assist in implementing corrective actions.
- Verify that personal protective equipment is used and maintained appropriately.
Minimum Requirements:</p>
UAE - Dubai
<p>HSE Engineer
Role Summary:
Supports the implementation of health and safety requirements on site by conducting regular inspections, monitoring work practices, and reinforcing compliance with approved procedures and risk controls.
Duties & Responsibilities:
- Conduct daily site inspections to identify unsafe acts, unsafe conditions, and potential hazards.
- Ensure that work is executed in line with method statements, risk assessments, and permit-to-work systems.
- Participate in toolbox talks and safety briefings and reinforce key safety messages with the workforce.
- Report hazards, near misses, and incidents and assist in implementing corrective actions.
- Verify that personal protective equipment is used and maintained appropriately.</p><p>Minimum Requirements:
- 3–7 years of HSE experience in civil construction projects.
Duties & Responsibilities:
- Conduct daily site inspections to identify unsafe acts, unsafe conditions, and potential hazards.
- Ensure that work is executed in line with method statements, risk assessments, and
permit-to-work systems.
- Participate in toolbox talks and safety briefings and reinforce key safety messages with the
workforce.
- Report hazards, near misses, and incidents and assist in implementing corrective actions.
- Verify that personal protective equipment is used and maintained appropriately.
Minimum Requirements:</p>
STAR SERVICES LLC
UAE - Abu Dhabi
<ul><li><p>Lead mechanical engineering activities for FEED and EPC projects, covering static equipment, packaged systems, and rotating machinery.</p></li><li><p>Ensure all mechanical designs comply with ASME and API codes and standards.</p></li><li><p>Review and approve specifications, design calculations, datasheets, and vendor documents for pressure vessels, heat exchangers, tanks, generators, nitrogen packages, and utility systems.</p></li><li><p>Provide technical support during installation, testing, commissioning, and mechanical completion phases.</p></li><li><p>Conduct risk assessments, prepare PTW documentation, and ensure compliance with ADOC HSE requirements.</p></li><li><p>Coordinate effectively with multidisciplinary teams, contractors, and vendors to resolve technical issues and maintain quality and schedule compliance.</p></li><li><p>Apply broad rotating equipment expertise, acting as a Mechanical–Rotary Engineer when required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>API 610 / API 617 / API 660 Certification with proven experience in Static and Rotating Equipment.</p><p>PMP certification or an MBA is preferred.</p><ul><li><p>Minimum 12–15 years’ experience in Mechanical Engineering on Onshore/Offshore FEED and EPC Oil & Gas projects.</p></li><li><p>Minimum 5 years’ Oil & Gas experience in the UAE, plus at least 5 years’ Oil & Gas experience within the GCC.</p></li><li><p>Experience across Engineering, Design, Construction, and Field Engineering roles, with exposure to Consultant and Contractor environments in both Onshore and Offshore projects.</p><ul><li><p>Strong FEED and EPC project experience in Oil & Gas environments.</p></li><li><p>Proven Field Engineering and site execution experience (onshore/offshore).</p></li><li><p>Expertise in static and rotating equipment, including package equipment engineering.</p></li><li><p>Solid mechanical design capability with application of ASME and API codes/standards.</p></li><li><p>Willingness for onshore/offshore site visits, with strong multitasking and communication skills.</p><br></li></ul></li></ul>
Aqua Care Technical Servicea L.L.C
UAE - Dubai
<p><br><strong>MUST BE IN THE UAE NOW</strong><br></p><p>What You’ll Do</p><p>Water Quality & Chemical Balance: Test pool chemistry (pH, chlorine, alkalinity, calcium hardness) daily and safely adjust chemical levels according to local health standards. Equipment Maintenance: Inspect, service, and maintain pool machinery, including pumps, motors, filtration systems, heaters, automation systems, and chlorinators. Routine Cleaning & Prep: Vacuum pool floors, brush walls, backwash filters, clean skimmer baskets, and skim surface debris to maintain pristine water clarity. Troubleshooting & Repairs: Diagnose mechanical or plumbing issues, repair pipe leaks, replace worn parts, and execute preventive maintenance schedules. Safety & Compliance: Ensure all pool safety equipment is present and functional. Maintain accurate logbooks for health department compliance and safety inspections. Facility upkeep: Keep pump rooms, chemical storage areas, and surrounding pool decks clean, organized, and secure.</p><p><br></p><p>Construction & Installation Phase Equipment & Mechanical Setup: Install and plumb commercial-grade pumps, filtration tanks, heaters, automated chlorination systems, and PVC pipe networks. Structural & Finishing Work: Assist with pool shell prep, coping, tile work, lining, rebar placement, and surface finishing/plaster application. Electrical & Automation Hookups: Support the installation and wiring of control panels, pool lighting, pumps, and water feature actuators. Commissioning & Startup: Conduct pressure tests, check for leaks, start up new systems, and balance water chemistry from raw fill to initial swimmer readiness.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>What We’re Looking For</p><p>Experience: 1–3 years in swimming pool construction, pool equipment installation, or commercial pipefitting/plumbing. Certifications. Valid driver's license is preferred. Trade Skills: Hands-on experience with PVC pressure pipe fitting, basic electrical circuits, motor installation, and light mason/concrete work. Physical Capability: Ability to handle heavy physical labor outdoors in varying weather conditions, lift up to 75 lbs, and operate heavy tools/machinery. Attention to Detail: Pride in clean craftsmanship—from straight plumbing runs in the pump room to precise tile and finish alignments.</p>
Aqua Care Technical Servicea L.L.C
UAE - Dubai
<p></p><p>What You’ll Do</p><p>
Water Quality & Chemical Balance: Test pool chemistry (pH, chlorine, alkalinity, calcium hardness) daily and safely adjust chemical levels according to local health standards.
Equipment Maintenance: Inspect, service, and maintain pool machinery, including pumps, motors, filtration systems, heaters, automation systems, and chlorinators.
Routine Cleaning & Prep: Vacuum pool floors, brush walls, backwash filters, clean skimmer baskets, and skim surface debris to maintain pristine water clarity.
Troubleshooting & Repairs: Diagnose mechanical or plumbing issues, repair pipe leaks, replace worn parts, and execute preventive maintenance schedules.
Safety & Compliance: Ensure all pool safety equipment is present and functional. Maintain accurate logbooks for health department compliance and safety inspections.
Facility upkeep: Keep pump rooms, chemical storage areas, and surrounding pool decks clean, organized, and secure.</p><p></p><p>Construction & Installation Phase
Equipment & Mechanical Setup: Install and plumb commercial-grade pumps, filtration tanks, heaters, automated chlorination systems, and PVC pipe networks.
Structural & Finishing Work: Assist with pool shell prep, coping, tile work, lining, rebar placement, and surface finishing/plaster application.
Electrical & Automation Hookups: Support the installation and wiring of control panels, pool lighting, pumps, and water feature actuators.
Commissioning & Startup: Conduct pressure tests, check for leaks, start up new systems, and balance water chemistry from raw fill to initial swimmer readiness.</p><p></p><p><strong>Desired Candidate Profile</strong></p><p>What We’re Looking For</p><p>
Experience: 2–4 years in swimming pool construction, pool equipment installation, or commercial pipefitting/plumbing.
Certifications: Certified Pool Operator (CPO) or Aquatic Facility Operator (AFO) preferred (or path to certification within 60 days). Valid driver's license required.
Trade Skills: Hands-on experience with PVC pressure pipe fitting, basic electrical circuits, motor installation, and light mason/concrete work.
Physical Capability: Ability to handle heavy physical labor outdoors in varying weather conditions, lift up to 75 lbs, and operate heavy tools/machinery.
Attention to Detail: Pride in clean craftsmanship—from straight plumbing runs in the pump room to precise tile and finish alignments.</p>
Aqua Care Technical Servicea L.L.C
UAE - Dubai
<br><p>What You’ll Do</p><p>
Water Quality & Chemical Balance: Test pool chemistry (pH, chlorine, alkalinity, calcium hardness) daily and safely adjust chemical levels according to local health standards.
Equipment Maintenance: Inspect, service, and maintain pool machinery, including pumps, motors, filtration systems, heaters, automation systems, and chlorinators.
Routine Cleaning & Prep: Vacuum pool floors, brush walls, backwash filters, clean skimmer baskets, and skim surface debris to maintain pristine water clarity.
Troubleshooting & Repairs: Diagnose mechanical or plumbing issues, repair pipe leaks, replace worn parts, and execute preventive maintenance schedules.
Safety & Compliance: Ensure all pool safety equipment is present and functional. Maintain accurate logbooks for health department compliance and safety inspections.
Facility upkeep: Keep pump rooms, chemical storage areas, and surrounding pool decks clean, organized, and secure.</p><br><p>Construction & Installation Phase
Equipment & Mechanical Setup: Install and plumb commercial-grade pumps, filtration tanks, heaters, automated chlorination systems, and PVC pipe networks.
Structural & Finishing Work: Assist with pool shell prep, coping, tile work, lining, rebar placement, and surface finishing/plaster application.
Electrical & Automation Hookups: Support the installation and wiring of control panels, pool lighting, pumps, and water feature actuators.
Commissioning & Startup: Conduct pressure tests, check for leaks, start up new systems, and balance water chemistry from raw fill to initial swimmer readiness.</p><br><p><strong>Desired Candidate Profile</strong></p><p>What We’re Looking For</p><p>
Experience: 2–4 years in swimming pool construction, pool equipment installation, or commercial pipefitting/plumbing.
Certifications: Certified Pool Operator (CPO) or Aquatic Facility Operator (AFO) preferred (or path to certification within 60 days). Valid driver's license required.
Trade Skills: Hands-on experience with PVC pressure pipe fitting, basic electrical circuits, motor installation, and light mason/concrete work.
Physical Capability: Ability to handle heavy physical labor outdoors in varying weather conditions, lift up to 75 lbs, and operate heavy tools/machinery.
Attention to Detail: Pride in clean craftsmanship—from straight plumbing runs in the pump room to precise tile and finish alignments.</p>
Kinematic technical services LLC
UAE - Abu Dhabi
<p>Yes. For an <strong>HVAC Electrical Foreman for Oil & Gas buildings</strong>, I would make the requirements more stringent than a normal commercial HVAC electrician. The person needs to understand <strong>HVAC power, controls, hazardous areas, Oil & Gas HSE, PTW/LOTO, testing and commissioning, and coordination with mechanical/HVAC teams</strong>.</p><p>HVAC Electrical Foreman – Oil & Gas Buildings</p><p><strong>Position:</strong> HVAC Electrical Foreman<br><strong>Industry:</strong> Oil & Gas / EPC<br><strong>Reports to:</strong> Electrical Engineer / Project Manager / Site Manager</p><p>Key Responsibilities</p><ol><li><p><strong>HVAC Electrical Installation</strong></p></li></ol><ul><li><p>Supervise electrical installation for AHUs, FAHUs, FCUs, exhaust/supply fans, pumps, package units, condensing units and other HVAC equipment.</p></li><li><p>Install power and control cables, conduits, cable trays and supports.</p></li><li><p>Carry out cable glanding, termination, dressing and tagging.</p></li><li><p>Install and connect HVAC control panels, starters, VFDs, isolators and local control stations.</p></li><li><p>Coordinate HVAC electrical works with mechanical installation and controls/BMS teams.</p></li></ul><ol start="2"><li><p><strong>Oil & Gas Requirements</strong></p></li></ol><ul><li><p>Understand hazardous-area classifications and requirements.</p></li><li><p>Work with <strong>Ex-rated equipment, glands, junction boxes, isolators and electrical accessories</strong> where applicable.</p></li><li><p>Understand equipment protection concepts such as Ex d / Ex e / Ex ia where relevant to the project.</p></li><li><p>Ensure correct installation according to approved drawings, project specifications and applicable Oil & Gas standards.</p></li><li><p>Understand earthing and bonding requirements.</p></li><li><p>Verify cable glands and termination arrangements for hazardous-area equipment.</p></li></ul><ol start="3"><li><p><strong>Testing & Commissioning</strong></p></li></ol><ul><li><p>Perform/assist with:</p><ul><li><p>Continuity testing</p></li><li><p>Insulation resistance testing</p></li><li><p>Earth continuity</p></li><li><p>Motor rotation checks</p></li><li><p>Control circuit testing</p></li><li><p>Interlock testing</p></li><li><p>VFD checks</p></li><li><p>HVAC equipment functional testing</p></li></ul></li><li><p>Assist the commissioning engineer with start-up and troubleshooting.</p></li><li><p>Record test results and close punch-list items.</p></li></ul><ol start="4"><li><p><strong>HSE Responsibilities</strong></p></li></ol><ul><li><p>Follow <strong>PTW, LOTO and electrical isolation procedures</strong>.</p></li><li><p>Conduct daily Toolbox Talks.</p></li><li><p>Ensure electrical work is carried out safely in operating/industrial areas.</p></li><li><p>Ensure proper PPE and electrical safety requirements.</p></li><li><p>Control electrical tools and temporary power.</p></li><li><p>Stop unsafe work and report hazards immediately.</p></li><li><p>Maintain good housekeeping.</p></li></ul><ol start="5"><li><p><strong>Manpower Supervision</strong></p></li></ol><ul><li><p>Allocate work to electricians and helpers.</p></li><li><p>Check daily productivity and workmanship.</p></li><li><p>Monitor manpower attendance.</p></li><li><p>Coordinate daily activities with the HVAC/mechanical foreman.</p></li><li><p>Ensure work is completed according to the project schedule.</p></li><li><p>Report manpower/material shortages to the Site Engineer.</p></li></ul><ol start="6"><li><p><strong>Documentation</strong><br>The Foreman should be capable of maintaining:</p></li></ol><ul><li><p>Daily progress report</p></li><li><p>Manpower report</p></li><li><p>TBT records</p></li><li><p>Installation checklists</p></li><li><p>Cable termination records</p></li><li><p>Testing records</p></li><li><p>Inspection requests</p></li><li><p>Punch-list</p></li><li><p>Material records</p></li><li><p>As-built markups</p></li><li><p>Equipment installation/termination checklists</p></li></ul><p>Minimum Candidate Requirements</p><p><strong>Education:</strong> ITI / Diploma in Electrical Engineering or equivalent.</p><p><strong>Experience:</strong></p><ul><li><p><strong>7–10 years total electrical experience</strong></p></li><li><p>Minimum <strong>3–5 years in HVAC electrical works</strong></p></li><li><p>Oil & Gas / EPC experience strongly preferred</p></li><li><p>Experience with industrial buildings, control rooms, substations, workshops, accommodation buildings, utility buildings, etc.</p></li></ul><p>Candidate Must Know</p><ul><li><p>HVAC electrical power and control</p></li><li><p>MCC/DB connections</p></li><li><p>VFDs and motor starters</p></li><li><p>HVAC control panels</p></li><li><p>BMS interface</p></li><li><p>Sensors and thermostats</p></li><li><p>Cable sizing and termination</p></li><li><p>Cable trays/conduits</p></li><li><p>Earthing/bonding</p></li><li><p>Electrical drawings and schematics</p></li><li><p>Testing & commissioning</p></li><li><p>Hazardous-area requirements</p></li><li><p>Ex-rated electrical equipment</p></li><li><p>PTW / LOTO / TBT</p></li><li><p>Oil & Gas site safety requirements</p></li></ul><p>Interview – Practical Test</p><p>I strongly recommend testing him before hiring. Give him an <strong>HVAC electrical schematic</strong> and ask him to explain:</p><ol><li><p>Incoming power supply</p></li><li><p>MCC/DB → HVAC panel</p></li><li><p>Panel → motor/equipment</p></li><li><p>Control circuit</p></li><li><p>VFD/starter operation</p></li><li><p>Emergency stop/interlock</p></li><li><p>Fire alarm shutdown interface</p></li><li><p>BMS interface</p></li><li><p>Earthing</p></li><li><p>Hazardous-area requirements</p></li><li><p>Cable gland selection</p></li><li><p>Testing before energization</p></li></ol><p>.</p><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p><strong>HVAC Electrical Installation & Supervision</strong></p></li><li><p>Reading and interpreting <strong>Electrical SLDs, wiring diagrams, control schematics and HVAC drawings</strong></p></li><li><p>Installation and termination of <strong>power & control cables</strong></p></li><li><p><strong>Cable glanding, termination, dressing and tagging</strong></p></li><li><p><strong>MCC, DB, HVAC control panels and local control panels</strong></p></li><li><p><strong>VFDs, starters, contactors and motor controls</strong></p></li><li><p>HVAC equipment electrical connections: <strong>AHU, FAHU, FCU, fans, pumps, package units and condensing units</strong></p></li><li><p><strong>HVAC controls and BMS interface</strong></p></li><li><p><strong>Fire alarm interlocks and HVAC shutdown systems</strong></p></li><li><p><strong>Testing & commissioning</strong> of HVAC electrical systems</p></li><li><p>Continuity, insulation resistance and <strong>earth testing</strong></p></li><li><p><strong>Hazardous-area / Ex-rated electrical installation</strong></p></li><li><p>Knowledge of <strong>Ex d, Ex e, Ex i</strong> equipment and accessories</p></li><li><p><strong>Earthing and bonding</strong></p></li><li><p><strong>PTW, LOTO and electrical isolation</strong></p></li><li><p>Oil & Gas <strong>HSE requirements</strong></p></li><li><p>Conducting <strong>Toolbox Talks (TBT)</strong></p></li><li><p>Electrical fault finding and troubleshooting</p></li><li><p>Manpower allocation and <strong>site team supervision</strong></p></li><li><p>Daily progress monitoring and reporting</p></li><li><p>Material planning and coordination</p></li><li><p>Coordination with <strong>Mechanical, HVAC, E&I, QA/QC and Commissioning teams</strong></p></li><li><p>Inspection requests, checklists and <strong>QA/QC documentation</strong></p></li><li><p>Punch-list preparation and closeout</p></li><li><p>As-built drawings and site mark-ups</p></li><li><p>Knowledge of <strong>Oil & Gas / EPC project requirements</strong></p></li><li><p>Good communication and leadership skills</p></li><li><p>Ability to work under <strong>project schedule and site pressure</strong></p></li><li><p>Computer skills: <strong>MS Excel, Word and basic project documentation</strong></p></li></ul><p><strong>For your hiring advertisement, I would highlight the top 10 as:</strong><br><strong>HVAC Electrical Installation | Oil & Gas Experience | Hazardous Areas | HVAC Controls | VFDs | BMS | Electrical Drawings | Testing & Commissioning | PTW/LOTO | Manpower Supervision.</strong></p>
NMDC
UAE
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<ul><li>Bachelor's Degree in Mechanical Engineering or a related discipline.</li><li>Minimum <strong>8-15 years of experience</strong> in Oil & Gas fabrication yards, EPC projects, or offshore/onshore construction projects.</li><li><p>Hands-on experience in fabrication and construction of:</p><br><ul><li>Offshore Jackets</li><li>Topsides & Modules</li><li>Structural Steel</li><li>Piping Systems</li><li>Process Skids</li><li>Mechanical Equipment</li></ul><p><strong>Technical Skills</strong></p><br></li><li>Structural Steel & Piping Fabrication</li><li>Welding & NDT Coordination</li><li>Material Traceability & Weld Mapping</li><li>Hydrotesting & Mechanical Completion</li><li>Fabrication Drawings, P&IDs & Isometrics</li><li>Production Planning & Progress Monitoring</li><li>Lifting & Rigging Coordination</li><li>QA/QC Documentation & Inspection Management</li></ul><br><br>Responsibilities:<br><ul><li>Supervise fabrication, assembly, and erection activities for offshore jackets, topsides, modules, skids, structural steel, piping systems, pipe racks, and mechanical equipment.</li><li>Plan and monitor fabrication progress, manpower utilization, productivity, and equipment deployment.</li><li>Coordinate with Engineering, QA/QC, Planning, Procurement, Logistics, and HSE teams to ensure smooth project execution.</li><li>Review fabrication drawings, isometrics, P&IDs, and material take-offs.</li><li>Monitor fit-up, welding, NDT, dimensional control, hydrotesting, pneumatic testing, and mechanical completion activities.</li><li>Ensure compliance with project specifications, quality standards, HSE requirements, and client procedures.</li><li>Coordinate inspections, punch-list clearance, system handovers, and turnover documentation.</li></ul><br><br>Qualifications:<br><p>As per HC Standard <span><span><strong>Qualifications for Yard Engineer</strong></span></span></p><br> </div>
Vyas Interior Design and Technical Services LLC
UAE - Dubai
<br><ul><li><p>Carry out preventive and corrective maintenance of AC and HVAC systems.</p></li><li><p>Diagnose AC faults and identify mechanical, electrical, and cooling issues.</p></li><li><p>Service and repair <strong>Split AC, Ducted Split, Package Units, FCU and AHU systems</strong>.</p></li><li><p>Perform AC general servicing and deep cleaning of filters, coils, blowers and drain lines.</p></li><li><p>Check refrigerant pressure and carry out gas charging/top-up when required.</p></li><li><p>Detect and repair refrigerant and water leakage issues.</p></li><li><p>Troubleshoot compressors, motors, capacitors, contactors, thermostats, sensors and control components.</p></li><li><p>Carry out FCU drain flushing and rectify drainage/blockage issues.</p></li><li><p>Perform vacuuming, pressure testing and commissioning of AC systems.</p></li><li><p>Install and replace AC units, copper piping, insulation and drainage lines where required.</p></li><li><p>Inspect equipment and provide clear technical reports regarding faults and recommended repairs.</p></li><li><p>Attend breakdown and emergency maintenance calls.</p></li><li><p>Maintain tools, equipment and materials properly.</p></li><li><p>Follow company safety procedures and maintain a clean work area.</p></li><li><p>Coordinate professionally with supervisors, clients and other technicians on site.<br><br></p></li></ul><p><strong>Requirements</strong><br></p><ul><li><p>Minimum <strong>2–3 years of UAE/GCC experience</strong> as an HVAC / AC Technician preferred.</p></li><li><p>Strong knowledge of AC servicing, maintenance, installation and troubleshooting.</p></li><li><p>Experience working with FCU, AHU, Split AC, Ducted Split and Package AC systems.</p></li><li><p>Good understanding of refrigerant systems, electrical controls and AC drainage systems.</p></li><li><p>Ability to independently diagnose faults and recommend solutions.</p></li><li><p>Ability to read basic electrical diagrams and use HVAC testing equipment.</p></li><li><p>Good communication and customer service skills.</p></li><li><p>Physically fit and comfortable working on villas, apartments and commercial sites.</p></li><li><p>UAE driving licence is an advantage.</p></li><li><p>ITI / Diploma in HVAC, Refrigeration or a related technical field is preferred.<br></p></li></ul><p>Preferred Candidate</p><p>We are looking for someone <strong>responsible, technically strong, punctual, and capable of handling AC maintenance calls independently</strong>, while maintaining a professional standard of workmanship and customer service.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a high school diploma or equivalent, with vocational training or an associate's degree in HVAC technology strongly preferred.</li><li>Hold EPA Section 608 certification (Universal, Type I, II, and III) for refrigerant handling.</li><li>Have 3-5 years of hands-on experience troubleshooting and repairing residential and commercial HVAC systems.</li><li>Demonstrate proficiency in reading and interpreting electrical schematics, blueprints, and technical manuals.</li></ul>
UAE - Dubai
Position Details<br><br>Particulars<br><br>Details<br><br>Designation<br><br>EHS Manager<br><br>Business Unit<br><br>L&T Construction – Transportation Infrastructure IC<br><br>Project Type<br><br>EPC – Roads / Highways Infrastructure<br><br>Location<br><br>Dubai, UAE<br><br>Experience<br><br>15+ Years<br><br>Qualification<br><br>B. E./B. Tech in Engineering with a Diploma/Advanced Diploma in Industrial Safety or equivalent EHS qualification<br><br>Industry<br><br>Roads, Highways, Infrastructure & EPC<br><br>Mandatory Requirement<br><br>Prior RTA project experience in Dubai<br><br>Job Purpose<br><br>To lead and manage all Environment, Health & Safety (EHS) activities for a major Roads EPC project in Dubai, ensuring compliance with applicable UAE regulations, Dubai Municipality requirements, RTA standards, project specifications, and L&T EHS policies.<br><br>The role will be responsible for developing and implementing project-specific EHS management systems, ensuring safe execution of road construction activities, managing site-level EHS teams, and promoting a proactive safety culture across all project operations.<br><br>Key Responsibilities<br><br> EHS Management & Compliance Develop, implement, and monitor the project-specific EHS Management Plan in accordance with L&T policies, applicable UAE regulations, and RTA requirements. Ensure compliance with relevant RTA EHS guidelines, project specifications, statutory requirements, and client HSE standards. Establish and monitor EHS objectives, KPIs, safety performance indicators, and improvement initiatives. Lead EHS audits, inspections, compliance reviews, and management reviews. Roads & Infrastructure Project Safety Oversee EHS activities for road construction, highway development, road widening, junction improvements, utility diversions, and associated infrastructure works. Ensure effective safety management for excavation, earthworks, asphalt paving, road marking, concrete works, lifting operations, and heavy equipment movement. Manage traffic safety and temporary traffic management arrangements, including work-zone protection, diversions, barricading, signage, and coordination with relevant authorities. Ensure safe execution of activities involving live traffic, public interfaces, underground utilities, and work in restricted areas. Risk Assessment & Hazard Control Review and approve risk assessments, Job Safety Analyses (JSA), and Method Statements for critical construction activities. Identify project-specific hazards and implement suitable control measures in line with the hierarchy of controls. Conduct regular site inspections and ensure timely closure of EHS observations and non-conformities. Monitor high-risk activities and ensure effective implementation of Permit-to-Work systems. RTA & Client Coordination Act as the key EHS interface with RTA representatives, client teams, consultants, project management consultants, and other relevant stakeholders. Coordinate RTA-related EHS inspections, audits, compliance reviews, and safety meetings. Ensure timely closure of RTA/client observations and implementation of corrective and preventive actions. Support project teams in meeting client-specific EHS deliverables and contractual safety requirements. Incident Management & Emergency Preparedness Lead the investigation of accidents, incidents, near misses, and unsafe occurrences. Identify root causes and ensure implementation of corrective and preventive measures. Develop and implement emergency response plans, including fire safety, medical emergencies, and road traffic incidents. Organize emergency drills and evaluate the effectiveness of emergency response arrangements. EHS Team Leadership Lead, guide, and manage the project EHS team, including EHS engineers, officers, and supervisors. Define responsibilities, monitor team performance, and ensure adequate EHS coverage across project sites and shifts. Conduct regular safety meetings, toolbox talks, and workforce awareness programs. Promote employee engagement and strengthen a positive safety culture among employees, subcontractors, and site personnel. Subcontractor & Workforce Safety Monitor subcontractor compliance with project EHS requirements and L&T safety standards. Review subcontractor EHS plans, risk assessments, and safety documentation. Ensure adequate induction, training, competency assessment, and safety awareness for all personnel. Monitor the implementation of welfare, occupational health, PPE, and safe working practices. Environmental Management Ensure implementation of project environmental management plans and applicable environmental requirements. Monitor dust, noise, waste management, emissions, spill prevention, and pollution control measures. Ensure appropriate management of construction waste, hazardous materials, and environmental incidents. Coordinate environmental inspections and ensure closure of identified non-compliances. Reporting & Documentation Prepare and submit periodic EHS performance reports, dashboards, statistics, and KPI updates. Maintain records of inspections, audits, incidents, training, permits, risk assessments, and corrective actions. Support project management in EHS planning, resource allocation, and performance improvement initiatives. Ensure timely submission of EHS documentation and reports to the client, consultant, and internal management.<br><br>Mandatory Requirements<br><br>Minimum 15+ years of overall experience in EHS management within construction, infrastructure, roads, highways, or EPC projects. Mandatory prior experience in RTA projects in Dubai, with demonstrated understanding of RTA EHS requirements and project compliance processes. Relevant experience in managing EHS functions for large-scale road/highway construction or infrastructure EPC projects. Proven experience in client, consultant, and regulatory authority coordination. Strong knowledge of road construction safety, traffic management, excavation safety, heavy equipment operations, and high-risk construction activities. Experience in leading and managing a project-level EHS team.<br><br>Educational Qualification & Certifications<br><br>B. E./B. Tech in Civil, Mechanical, Environmental, or other relevant Engineering discipline. Diploma/Advanced Diploma in Industrial Safety or an equivalent recognized EHS qualification. NEBOSH International General Certificate (IGC) or equivalent recognized HSE certification preferred. NEBOSH International Diploma, professional safety certifications, or equivalent advanced qualifications will be an added advantage. Relevant UAE EHS training and RTA-related safety training will be an advantage.<br><br>Key Competencies<br><br>Strong leadership and decision-making skills. Excellent communication, coordination, and stakeholder management. Sound knowledge of UAE construction EHS requirements and RTA project safety expectations. Strong analytical, problem-solving, and incident investigation skills. Ability to manage multiple work fronts in a fast-paced EPC project environment. Proactive approach to risk management and continuous safety improvement.<br><br>Preferred Candidate Profile<br><br>A seasoned EHS professional with 15+ years of experience in roads and infrastructure construction, including mandatory hands-on experience with RTA projects in Dubai. The candidate should have a strong track record of leading project EHS functions, ensuring regulatory and client compliance, managing construction risks, and driving safety performance across large-scale EPC road projects.
UAE - Abu Dhabi
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><br> Responsible for supporting the Manager in ensuring that all activities are carried out in accordance with SEHA safety and management standards, policies and procedures, statutory and contractual requirements.<br> </p><br><br>Abu Dhabi Healthcare Company (SEHA) is the largest and most comprehensive healthcare network in the UAE that was established in 2007 with the objective of operating all public hospitals and clinics across the Emirate of Abu Dhabi.<br><br>SEHA is committed to delivering world-class healthcare services using the most advanced diagnostics and systems across its network of public healthcare centers and hospitals in addition to partnering with global leaders in healthcare, including world renowned organizations such as the Mayo Clinic.<br><br>Responsibilities:<br><p><br> Supervising the planning and design of all mechanical works <br> Providing direction and guidance on any mechanical system and/ or design drawings</p><br><p>Providing guidance on research in the use of different types of materials handling, heating and cooling processes, the storage and pumping of liquids and gases, and environmental controls</p><br><p>Overseeing and advising on setting up of work control systems, e.g. testing of equipment to make sure that standards of performance, quality, cost and safety are met</p><br><p>Carrying out studies about possible changes or improvements and estimating costs of upgrading facility available systems (HVAC - Heating ventilation and air-conditioning system)</p><br><p>Ensuring that completed works meet specifications and safety standards, contributing and adhering to the safety requirements of the operation</p><br><p>Assisting the Engineer in reviewing all mechanical drawings submitted by contractors/ consultants<br> Managing and monitoring day to day activities <br> Overseeing all activities related to mechanical works before, during and after the execution of the projects</p><br><p>Monitoring and ensuring that all works are carried out in accordance with the contract drawings, specification, instructions and programmers</p><br><p>Monitoring all planning, arrangement and control of material compliance testing/evaluation and ensuring relevant records are maintained</p><br><p>Planning and conducting regular record inspection and test activities for materials and workmanship</p><br><p>Approving and assisting the Engineer in resolving all recorded technical queries</p><br><p>Assisting and providing guidance to the Engineer in risk assessments</p><br><p>Overseeing installation for various mechanical systems e.g. plumbing system, drainage system (clean and dirty water), fire fighting and sprinkler system etc</p><br><p>Reviewing all mechanical drawings submitted by contractors/ consultants<br> Documentation and planning <br> Ensuring document control systems for the facilities on construction and maintenance information (if applicable)</p><br><p>Ensuring all method statements are prepared as required </p><br><p>Planning annually for any mechanical system up gradation and replacement</p><br><p>Assisting the Manager in budgetary planning for any mechanical equipment replacement</p><br><p>Preparing material ‘take-offs’, price comparisons and order materials as required, if applicable</p><br><p>Assisting in the planning and preparation of permits to work and task risk assessments<br> Communicating and coordinating <br> Communicating and consulting with other healthcare disciplines and all engineering and risk and safety departments</p><br><p>Attending interdisciplinary meetings to provide technical support and advice</p><br><p>Participating in joint meetings with members of the Health Authority Engineering Directorate</p><br><p>Participating in the development, communication and evaluation of standards, <br> procedures and protocols</p><br><p>Communicating and coordinating with local authorities for regulatory compliance e.g. Water Authority, Civil Defense Authority, Municipality etc.<br> Contributing to team effort <br> Participating in cross-functional teams and committees as appropriate</p><br><p>Developing and enhancing team procedure manual and processes and discussed with seniors</p><br><p>Managing his/her subordinates and ensuring team development and complaint resolution, setting KPI’s for direct reports and conducting performance appraisal and driving motivation levels of direct reports</p><br><p>Assuring Engineers and inspectors complete work on time and effectively</p><br><p>Overseeing work assigned for enquiries and inspections<br> </p><br><br>Qualifications:<br><p>Qualification :- </p><br><p> Special Certificate:- </p><br><p> Required: <br> 4-6 years of relevant experience in a similar industry<br> Desired: <br> Experience in a large healthcare facility<br> </p><br> </div>
iQuest Management Consultants Pvt. Ltd
UAE - Dubai
<ul><li>Perform preventative maintenance on sophisticated industrial equipment to minimize downtime and ensure operational efficiency.</li><li>Diagnose and troubleshoot complex mechanical, electrical, and pneumatic issues, rapidly restoring equipment to full functionality.</li><li>Execute scheduled and unscheduled repairs, meticulously documenting all work performed and parts used.</li><li>Interpret engineering drawings, schematics, and technical manuals to guide maintenance and repair procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related technical field.</li><li>Minimum of 5 years of experience in industrial equipment maintenance, preferably within a manufacturing or heavy industry environment.</li><li>Proven expertise in troubleshooting and repairing hydraulic, pneumatic, and electromechanical systems.</li><li>Certification in relevant areas such as PLC programming, industrial automation, or specific equipment types is highly advantageous.</li></ul>