Heavy equipment mechanical engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>• To carry out effective and efficient repair and maintenance of customer vehicles following the approved manufacturers repair techniques<br>Responsibilities:<br>Functional Roles and Responsibilities<br>• Collect job orders and the necessary materials/ tools/ equipment, to carry out the repairs and maintenance on the customers vehicles in accordance with the manufacturers repair techniques.<br>• Ensure accurate fault diagnosis and effective utilization of time allocated for the repairs. Report to Team Leader of any delays in repairs due to unavailability of parts or any other reason.<br>• Ensure all additional repairs are authorized; parts are booked to the repair order. Incase of warranty repair/ parts exchange program , return removed part to the parts department in the same carton to facilitate audit processes and getting necessary credit if applicable. Incase of retail jobs keep the old parts inside the vehicle except batteries and parts which may cause stain on the interior trim/ carpet of the vehicle.<br>• Service personal tools, keep the lifts and work area clean and comply with the health and safety standards.<br>• Upgrade knowledge by regularly doing web based courses and by attending class room trainings.<br>• Ensure efficiency and productivity is maintained above 100%.<br>• Keep all personal tools safe. Any breakages or accidents must be reported to the Team Leader / Supervisor immediately/Tool room for replacement.<br>• Ensure proper clocking on/off in the system and do write up in the repair order as per the prescribed procedure.<br>• Any unused parts must be returned or stored properly as per company procedure. Used parts must be disposed in an environment friendly manner.<br>• To work extra hours incase the job needs to be completed to ensure customer satisfaction as per Team Leader’s requirement.<br>Qualifications:<br>Education/Certification and Continued Education<br>• Diploma in Automotive Engineering<br>• Industrial Technical Institute ITI ( 2 years vocational course) - Certified Auto Technician Course<br>Years of Experience<br>• 2 to 3 years experience as technician for Diploma holder<br>• 3to 5 years experience as a technician for ITI holder<br>Knowledge and Skills<br>• Industrial Technical Institute (ITI) certified Auto Technician Course.<br>• Vocational Automobile Training Course<br>• Diploma in Automotive Engineering<br>• Additional technical skills, if any, are an additional advantage.<br>• In addition to mechanical skills, should have basic electrical knowledge.<br>• Trouble shooting and problem solving skills<br>• Should have attended basic technical courses from Vehicle Manufacturing companies</span> </div>

<ul><li><p>The Andon is accountable for leading and coaching the Volvo Personal Service team by enhancing customer experience and workshop efficiency while minimizing costs. This role emphasizes continuous improvement by guiding PSTs, supporting with minor car repairs, conducting short- and long-term planning, and driving key performance metrics. It demands achieving high customer satisfaction with a Net Promoter Score (NPS) of over 70%, and productivity levels exceeding 100%. The Andon plays a vital part in coordinating workshop improvement projects to boost productivity by 10% annually, sustaining 5S principles, and promoting value-added service sales.</p><p><br><strong>What You Will Do:</strong></p><ul><li><p>Lead and coach the Volvo Personal Service team to improve customer experience and efficiency while minimizing costs.</p></li><li><p>Conduct daily meetings to review agenda, encourage team reporting of problems, and ensure work in progress is less than 2 days of workshop capacity.</p></li><li><p>Follow up on team KPIs and maintain the Visual Planning board in the workshop.</p></li><li><p>Pre-check and manage daily planning for the team to predict support needs and avoid lost hours.</p></li><li><p>Provide first-line support to the PST/team to resolve production planning or daily work issues.</p></li><li><p>Coach and support PST in technical and administrative areas, meeting Volvo ITC targets.</p></li><li><p>Coordinate improvement work within the workshop to boost productivity by 10% each year.</p></li><li><p>Ensure 5S principles are adhered to, maintaining zero open points from workshop audits.</p></li><li><p>Enhance PST's abilities to sell value-added services, meeting sales targets for accessories, tinting, tires, batteries, and more.</p></li><li><p>Achieve customer retention targets by proposing services to inactive customers, maintaining retention over 70%.</p></li><li><p>Record and oversee training needs and completions for PST to ensure all technicians are certified.</p></li><li><p>Ensure PST completes 100% customer follow-up calls post-visit.</p></li><li><p>Collaborate with Al-Futtaim Automotive Academy for PST assessments and skill development, achieving a high Associate Engagement Score.</p></li><li><p>Provide on-the-job training and support business need analysis based on branch work output.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><br><strong>Required Skills To Be Successful:</strong></p><ul><li><p>Leadership and coaching skills.</p></li><li><p>Customer relationship management and complaint handling skills.</p></li><li><p>Technical skills and user skills in tools and equipment.</p></li><li><p>Problem-solving abilities in technical and operational areas.</p></li></ul><p><br><strong>What Qualifies You For The Role:</strong></p><ul><li><p>Bachelor's or Diploma in mechanical, automobile, or industrial engineering.</p></li><li><p>Advanced electrical vehicle technical certification and AATC/IMI Level 4 certifications.</p></li><li><p>Valid UAE driving license.</p></li><li><p>Minimum 5 years of experience as a technical lead in an automotive dealership, with advanced EV knowledge.</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p>We are seeking a motivated Associate Machine Operator to assist in the operation of our filling lines for PET/HDPE bottles and tins. The ideal candidate will work closely with the machine operators to ensure the efficient and safe operation of filling, capping, labeling, case packing, and palletizing processes in accordance with defined Standard Operating Procedures (SOPs). &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</p><br><br><br>Roles &amp; Responsibilities <br><ul> <li>Assist in the setup and operation of filling lines, including filling, capping, labeling, case packing, and palletizing of PET/HDPE bottles and tins &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Follow all SOPs to ensure consistency and quality in production processes. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Monitor equipment during operation to identify and report any issues or malfunctions to senior operators or supervisors. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Conduct routine inspections of products to ensure quality standards are met, including checking for leaks, labeling accuracy,Packaging material accuracy and correct capping. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Assist in performing maintenance tasks and cleaning of machines as per maintenance schedules to ensure optimal operation. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Help with the changeover of production lines for different product runs, including adjusting machine settings and replacing parts or tools as necessary. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Maintain accurate records of production data, including quantities produced and any defects or downtime. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Collaborate with team members to meet production targets and timelines while ensuring a safe working environment. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Participate in safety training and adhere to all safety protocols and procedures. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> </ul><br><br>KPIs <br><ul> <li>Out put as per defined standards and Plan &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>No Nonconforming product &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>No safety related issue &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> </ul><br><br>Work Experience Requirement <br><p>1-2 Years Experience to operate filling line in edible oil or beverage industry&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;</p><br><br><br>Qualification <br><p>Diploma / ITI/ Other certificate from Technical school (Electrical/Mechanical) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</p><br><br><br>Competencies <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p>We are seeking a motivated Associate Machine Operator to assist in the operation of our filling lines for PET/HDPE bottles and tins. The ideal candidate will work closely with the machine operators to ensure the efficient and safe operation of filling, capping, labeling, case packing, and palletizing processes in accordance with defined Standard Operating Procedures (SOPs). &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</p><br><br><br>Roles &amp; Responsibilities <br><ul> <li>Assist in the setup and operation of filling lines, including filling, capping, labeling, case packing, and palletizing of PET/HDPE bottles and tins &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Follow all SOPs to ensure consistency and quality in production processes. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Monitor equipment during operation to identify and report any issues or malfunctions to senior operators or supervisors. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Conduct routine inspections of products to ensure quality standards are met, including checking for leaks, labeling accuracy,Packaging material accuracy and correct capping. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Assist in performing maintenance tasks and cleaning of machines as per maintenance schedules to ensure optimal operation. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Help with the changeover of production lines for different product runs, including adjusting machine settings and replacing parts or tools as necessary. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Maintain accurate records of production data, including quantities produced and any defects or downtime. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Collaborate with team members to meet production targets and timelines while ensuring a safe working environment. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>Participate in safety training and adhere to all safety protocols and procedures. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> </ul><br><br>KPIs <br><ul> <li>Out put as per defined standards and Plan &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>No Nonconforming product &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> <li>No safety related issue &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li> </ul><br><br>Work Experience Requirement <br><p>1-2 Years Experience to operate filling line in edible oil or beverage industry&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;</p><br><br><br>Qualification <br><p>Diploma / ITI/ Other certificate from Technical school (Electrical/Mechanical) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</p><br><br><br>Competencies <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview Of The Role:</b></p><p><br></p><ul><li>The Service Advisor acts as a critical liaison between customers and the workshop, ensuring that equipment service needs are efficiently met to enhance customer satisfaction and loyalty. The role involves handling service inquiries, preparing quotes, and managing customer approvals and payments. Key success factors include strong customer interaction, diligent financial management, and ensuring service delivery meets company standards and timelines.</li></ul><p><br></p><p><b>What You Will Do:</b></p><p><br></p><p>Customer Interaction</p><p><br></p><ul><li>Engage with customers and technicians to build strong rapport, empathizing and clarifying customer requests.</li><li>Serve as the liaison between customers and the workshop to ensure service needs are understood and addressed.</li><li>Provide guidance on service options, including time and cost estimation, and ensure adherence to these estimates.</li></ul><p><br></p><p>Service Quotation and Reporting</p><p><br></p><ul><li>Prepare service quotations and service reports, and follow up on customer approvals.</li><li>Manage the number of approved/invoiced jobs and generate a lost sales report.</li></ul><p><br></p><p>Financial Management</p><p><br></p><ul><li>Follow up on customer payments to clear outstanding balances and close jobs once completed to prevent aged Work in Progress (WIP) reports.</li><li>Drive upselling and conversion of additional jobs, preventive maintenance, and parts recommendations based on service reports and machine history.</li></ul><p><br></p><p>Service Delivery</p><p><br></p><ul><li>Ensure jobs are completed with workshop and spare parts teams, meeting time and cost estimates.</li><li>Perform billing and provide detailed explanations of invoices and jobs performed, ensuring customer satisfaction.</li><li>Conduct post-service feedback calls to enhance the Customer Satisfaction Index (CSI).</li></ul><p><br></p><p>Operational Excellence</p><p><br></p><ul><li>Responsible for system transactions including creating quotations, job orders, delivery notes, gate passes, and billing.</li><li>Ensure proper documentation, filing, and archiving as per company and ISO standards.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills To Be Successful:</b></p><p><br></p><ul><li>Excellent interpersonal and communication skills, both oral and written.</li><li>Strong marketing and upselling skills to drive additional service revenue.</li><li>Ability to work proactively, employing preventive measures and demonstrating accountability.</li><li>Cultural sensitivity with a strong customer-centric approach.</li></ul><p><br></p><p><b>What Qualifies You For The Role:</b></p><p><br></p><ul><li>Diploma or Bachelor of Automobile/Marine/Electrical or Mechanical Engineering.</li><li>Minimum of 8 years overall experience with authorized OEM dealership, including at least 5 years as a Service Advisor, preferably in Generators or Marine engines.</li><li>Strong understanding of automotive dealer/distributor business and workshop processes, and technical knowledge of diesel engines, driveline, electrical systems, and spare parts.</li><li>Proficiency in MS Office, SAP, ARIBA, CRM/DBM, and a professional level of English. Arabic is preferable.</li></ul><p><br></p></div>

<ol><li><p>Operate and set up <strong>5-axis CNC machining centers</strong> for the manufacture of impellers, shafts, rotors, and other high-precision rotating components.</p></li><li><p>Perform machine setup, workpiece alignment, fixture setup, tool selection, tool setting, and offset adjustment.</p></li><li><p>Read and interpret engineering drawings, machining drawings, GD&T requirements, tolerances, and manufacturing specifications.</p></li><li><p>Execute CNC programs and make necessary tool-offset or parameter adjustments to maintain dimensional accuracy.</p></li><li><p>Machine complex impeller profiles, blades, hubs, shafts, journals, rotor features, keyways, threads, grooves, and other precision geometries.</p></li><li><p>Monitor cutting conditions, tool wear, spindle load, vibration, surface finish, and machining performance during production.</p></li><li><p>Conduct in-process dimensional inspection using micrometers, vernier calipers, height gauges, bore gauges, dial indicators, and other precision measuring instruments.</p></li><li><p>Ensure finished components meet required dimensions, tolerances, surface finish, and quality standards.</p></li><li><p>Work with various materials including carbon steel, stainless steel, alloy steel, Inconel, titanium, and other high-performance alloys as applicable.</p></li><li><p>Identify machining abnormalities, dimensional deviations, tool wear, chatter, and other production issues and take corrective action.</p></li><li><p>Coordinate with CNC programmers, manufacturing engineers, quality inspectors, and production supervisors.</p></li><li><p>Maintain proper identification and traceability of workpieces, tooling, programs, and production documentation.</p></li><li><p>Perform basic daily machine checks, cleaning, lubrication, and preventive maintenance activities.</p></li><li><p>Follow approved machining procedures, quality requirements, HSE rules, and workshop safety practices.</p></li><li><p>Support continuous improvement activities aimed at reducing machining time, scrap, tool consumption, and rework.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Diploma / Technical Certificate in Mechanical Engineering, Machining, Manufacturing Technology, CNC Technology, or equivalent.</p></li><li><p>Proven hands-on experience operating <strong>5-axis CNC machining centers</strong>.</p></li><li><p>Experience machining <strong>impellers, shafts, rotors, turbine/compressor components, or similar high-precision rotating equipment parts</strong> is highly preferred.</p></li><li><p>Strong knowledge of CNC machining principles, cutting tools, feeds and speeds, tool offsets, and machining parameters.</p></li><li><p>Ability to read complex engineering drawings, GD&T symbols, tolerances, and machining specifications.</p></li><li><p>Experience with <strong>Fanuc, Siemens, Heidenhain, or similar CNC controls</strong>.</p></li><li><p>Familiarity with CAM-generated CNC programs and basic understanding of G-code is preferred.</p></li><li><p>Good experience machining difficult materials such as stainless steel, alloy steel, Inconel, or titanium is an advantage.</p></li><li><p>Proficient in using precision measuring instruments and performing in-process inspection.</p></li><li><p>Good understanding of surface finish, dimensional tolerances, concentricity, runout, and geometric accuracy.</p></li><li><p>Ability to troubleshoot machining problems such as chatter, tool breakage, dimensional variation, and poor surface finish.</p></li><li><p>Strong attention to detail, quality awareness, and safe working practices.</p></li><li><p>Ability to work independently and as part of a manufacturing and quality team.</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><strong><u>JOB PURPOSE:</u></strong><br>Managing Drilling Services commitments in accordance with best industry practices/latest technology, ADNOC<br>Onshore Established policies, and legal requirements. Operates independently on assigned projects and<br>determines contracts model to be used. The work requires the assessment and implementation of comprehend<br>Drilling Services contract to maximize the value of information is obtained from exploration/appraisal well, cost<br>effective wells, and operations.</p><br><p><strong>Job Specific:</strong></p><br><ul><li>Identify and validate the Need of Tendering, build up Business Cases, tender strategies and acquire necessary<br>approvals.</li><li>Assess and review competency of existing bidder list companies.</li><li>Participate in pre-qualification of newly registered companies and advise best group to be fit in</li><li>Prepare and participate in Tender Committee meeting, review Tender Board Submission, attends Tender<br>Board meetings as require representing technical aspect of submission.</li><li>Construct technical requirements/scope of work, pricing structure fit working model, specifications to be<br>included in contracts, develop contract / tendering strategies, provide engineering support for tendering<br>activities, conduct technical and commercial evaluations, assisting in negotiations, etc.</li><li>Review Tender packages to assure clarity of Request for Tendering (RFT) and in line with ADNOC Standards<br>and compliant with Scope of Work</li><li>Capture Variations expose during contract life through right Delegation of Authority.</li><li>Perform functional review for the completed Tender documents.</li><li>Follow up the status of Mobilization, HSE rules compliance and implementation of corrective actions,<br>performance management and contractor allocation.</li><li>Coordinates internally with other Team members to ensure contract effectiveness, capture lessons from<br>current contracts and apply for upcoming contracts</li><li>Prepare allocation based on the approved share allocation and in relation to contractor’s performance and<br>capabilities.</li><li>Compliance with Contracts status reporting.</li><li>Assure Contract validity, contract completion and close out. Review Contractor performance evaluation and<br>managing contracts disputes. Negotiate Contract claims and variations in association with Procurement Division<br>and Legal.</li><li>Periodically revisit the contract commitment (un-used Release Orders) and clear them and reconcile contract<br>value.</li><li>Managing contracts resources (people, equipment’s, etc.) to ensure business continuity and cater business<br>requirements.</li><li>Liaise with HSE, QA&amp;QC team and end users to assure Equipment’s and Services are within required<br>standards of work.</li></ul><p><strong><u>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS:</u></strong></p><br><p><br><strong>Minimum Qualification</strong></p><br><ul><li>Bachelor’s degree in Engineering or Science (Mechanical /Petroleum or equivalent/relevant discipline)<br></li></ul><p><strong>Minimum Experience &amp; Knowledge &amp; Skills</strong></p><br><ul><li>8 years of experience, including involvement in drilling technology, equipment/products and methods.<br>Professional Certifications</li><li>Experience on the well site and financial, tendering/contracting and cost engineering systems and<br>procedures.</li></ul><p><strong>Professional Certifications</strong></p><br><p>Contract Management certificates<br></p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><b><b>Job Description:</b></b></span></p><br><br><p><span>For Airbus Customer Services, We are seeking an experienced and detail-oriented Aircraft Technician (Systems) to join our team within the department of IDSBCR Major Repair and Working Party in Dubai (Airbus Africa and Middle East). The successful candidate will be responsible for inspecting, maintaining, and repairing aircraft systems to ensure their safe and efficient operation. The Aircraft Technician will work closely with other technicians, engineers, and maintenance personnel to troubleshoot, diagnose, and resolve system-related issues. This position requires strong technical expertise, excellent problem-solving skills, and a commitment to maintaining the highest standards of safety.</span></p><br><br><br><p><b><span>Main responsibilities:</span></b></p><br><br><br><p><b><span>-</span></b><span> For the execution of modification embodiment or repair working party, managing complex, high value and cross-functional projects compliant with EASA/FAR Part 145 airworthiness regulation.</span></p><br><br><p><span>- Conduct upgrade embodiment activities on external customer aircraft.</span></p><br><br><p><span>- Perform major and complex repair projects including but not limited to incidental and fleet wide repairs.</span></p><br><br><p><span>- Inspect, troubleshoot, and repair various aircraft systems, including electrical, hydraulic, pneumatic, fuel, and environmental systems.</span></p><br><br><p><span>- Conduct regular maintenance checks to identify and rectify system malfunctions and ensure compliance with aviation regulations and manufacturer guidelines.</span></p><br><br><p><span>- Perform scheduled inspections, repairs, and modifications as per maintenance schedules and work orders.</span></p><br><br><p><span>- Utilize diagnostic equipment, technical manuals, and system-specific tools to diagnose and resolve system-related issues.</span></p><br><br><p><span>- Collaborate with other technicians, engineers, and maintenance personnel to develop solutions for complex system problems.</span></p><br><br><p><span>- Document all maintenance and repair activities accurately and thoroughly, including work performed, parts used, and hours spent, in compliance with regulatory requirements.</span></p><br><br><p><span>- Stay updated with the latest industry trends, technological advancements, and regulatory changes related to aircraft systems.</span></p><br><br><p><span>- Participate in training programs to enhance knowledge and skills in aircraft systems maintenance and repair.</span></p><br><br><p><span>- Adhere to safety protocols and ensure compliance with all relevant safety regulations and standards.</span></p><br><br><p><span>- Maintain a clean and organized work environment, ensuring all tools and equipment are properly calibrated and stored.</span></p><br><br><br><p><b><span>Requirements:</span></b></p><br><br><br><p><span>- High School diploma or equivalent; relevant technical certification or diploma preferred.</span></p><br><br><p><span>- EASA Part 66 License or any other Aircraft Maintenance License is a plus</span></p><br><br><p><span>- Experience in Flight Test Aircraft across Airbus Family, A380/A350 are a strong plus.&nbsp;</span></p><br><br><p><span>- Proven experience as an aircraft technician/systems technician, preferably with exposure to a variety of aircraft systems.</span></p><br><br><p><span>- Strong experience in Line as well as in Base Maintenance activities during Heavy Maintenance projects.</span></p><br><br><p><span>- Strong knowledge of aircraft systems, including electrical, hydraulic, pneumatic, fuel, and environmental systems, and familiarity with their components and functions.&nbsp;</span></p><br><br><p><span>-In-depth knowledge of flight control systems, proficient in conducting inspections, adjustments, and repairs on flight control systems to ensure proper functionality and alignment.&nbsp;</span></p><br><br><p><span>- Understanding of aircraft engines, including their types, their operation principles and proficiency in performing engine removal and installation procedures in accordance with guidelines and maintenance manuals.&nbsp;</span></p><br><br><p><span>- Understanding of landing gear components, including struts, wheels, brakes, and tires, the knowledge of landing gear retraction and extension mechanisms and proficiency in conducting landing gear inspections, maintenance, and troubleshooting.&nbsp;</span></p><br><br><p><span>- Familiarity with aircraft maintenance manuals (AMM, TSM, etc), technical specifications, and relevant regulations (e.g.,EASA, FAA).</span></p><br><br><p><span>- Proficient in using diagnostic equipment, tools, and software applications for system troubleshooting and repairs.</span></p><br><br><p><span>- Excellent problem-solving skills and ability to work well under pressure.</span></p><br><br><p><span>- Strong attention to detail and ability to follow instructions accurately.</span></p><br><br><p><span>- Ability to work independently as well as collaborate effectively with a team.</span></p><br><br><p><span>- Strong communication skills, both verbal and written.</span></p><br><br><p><span>- Excellent time management and organizational skills.</span></p><br><br><p><span>- Ability to work in a physically demanding environment, including standing, bending, and lifting heavy equipment.</span></p><br><br><br><p><b><span>Personal profile:</span></b></p><br><br><br><p><span>- 15+ to 20 years of experience in the aeronautical industry (MRO part 145 or Aircraft Manufacturing part 21)</span></p><br><br><p><span>- Field of education: Engineering / Production, Manufacturing</span></p><br><br><p><span>- A negotiation-level in English is a must, further languages esp. French are a plus.</span></p><br><br><p><span>- Ability to travel worldwide to support Airbus customers</span></p><br><br><p><span>- International work experience and strong communication skills.</span></p><br><br><p><span>- You are proactive, highly flexible, open-minded and have a very positive working attitude and working style which suits our team and meets business needs to contribute to company success.</span></p><br><br><p><span>- You have the ability to work in a dynamic and fast changing environment and integrate yourself quickly within a diverse and international team.</span></p><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Africa and Middle East FZE<br><p><b>Employment Type:</b></p><br><br>Permanent<p>-------</p><br><br><br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Job Family:</b></p><br><br>Production means/Maintenance &lt;JF-MA-MN&gt;<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br><p><span>At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.</span></p><br><br><br> </div>

Convergint is looking for a full-time, enthusiastic, results driven and forward-thinking Senior Engineer - Managed Services to join our amazing culture. As the Senior Engineer - Managed Services, you are a part of a dynamic team that allows you to grow as Convergint grows.<br><br><strong>For information about how we use your personal information, please see our Colleague &amp; Applicant Privacy Notice, available on convergint.com/careers. <br><br></strong><strong>Who You Are<br><br></strong>You have a passion for providing world-class service to customers, colleagues, and communities. You are a person of integrity with a commitment to growth, accountability, and delivering results. You want to join an organization with a positive culture that embraces equal opportunity and allows everyone to be the best version of themselves at work and home. You want to grow with us and deliver results as an exceptional Senior Engineer – Managed Services - Network.<br><br><strong>Who We Are<br><br></strong>With 20 years of proven growth and exceptional performance, our mission is to be our customer's best service provider. We realize the importance of diversity in achieving that goal. Our company was built upon a solid foundation of 10 Values and Beliefs which drive our unmatched culture, making us the #1 global, serviced-based systems integrator in the industry. We take great pride in protecting the lives and assets of our customers and their communities with the solutions we provide.<br><br><strong>Job Title:<br><br></strong>Senior Engineer - Managed Services<br><br><strong>Reporting Line:<br><br></strong>Reports to: Operations Manager – Managed Services MEA<br><br><strong>Department / Business Unit:<br><br></strong>Managed Services<br><br><strong>Work Location:<br><br></strong>Ras Al Khaimah, United Arab Emirates<br><br><strong>Job Purpose<br><br></strong>Main key contact for technical clarification in Managed Services and responsible for all technical communication. Involved in the development of technical skills of the Managed Services team. Arrange for resources and helps in solving technical problems as and when needed. Evaluates technical capabilities of Managed Services field teams. Provides technical expertise and helps in developing our field team technical skillsets.<br><br><strong>What You'll Do With Our Training And Your Experience<br><br></strong><ul><li>Must ensure teams follow the correct procedures, policies, and documentation requirements across maintenance duration. </li><li>Able to guide the team through the troubleshooting, testing and implementation stages and review the completed work effectively. </li><li>Provide direction and technical expertise in design, development and systems integration where required. </li><li>Able to make quick decisions and solve technical problems to provide an efficient environment for Managed Services implementation. </li><li>Identify resource and equipment requirements, efficient capacity planning and manage software and hardware availability. </li><li>Must provide technical training to teams when required and serve as a technical mentor to team members. </li><li>Regular site visits under AMC and making sure the system in place is running smoothly. </li><li>Checking the regular routine for Preventative Maintenance and the technical scope of work. </li><li>Conduct internal quality inspection for Managed Services activities. </li><li>Conduct technical site surveys for Managed Services requests. </li><li>Prepare technical guidelines for Managed Services team. </li><li>Technical performance evaluation of team members to be done every quarter. </li><li>In control of the overall technical performance of the team. </li><li>Develop and maintain a remote Managed Services program. </li><li>Ensures the efficiency of the Managed Services teams. </li><li>Oversees the technical handover to Managed Services teams. </li><li>Arrange for resources and help in solving technical problems on and offsite as and when needed. </li><li>Evaluates tender technical specifications. </li><li>Attends and build Client and Vendor relationships<br><br></li></ul><strong>What You'll Need<br><br></strong><ul><li>Bachelor of Engineering or IT as minimum. </li><li>Project Management skills are essential; certification will be an asset <br><br></li></ul><strong>Requirements:<br><br></strong><ul><li>8-10 years' experience in project management in security services companies. </li><li>Must have extensive knowledge of UAE </li><li>Detailed-oriented, excellent communication and presentation skills, customer orientation. </li><li>Highly technical.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Estimation Engineer – Fire Alarm &amp; Life Safety SystemsJob Summary<p>Prepares accurate estimates, quotations, BOQs, material take-offs, and technical-commercial proposals for Fire Alarm, Emergency Lighting, and Voice Evacuation systems, complying with project specifications, international standards, and UAE Civil Defence requirements.</p><br><br>Key Responsibilities<ul><li><p>Review tender documents, drawings, specifications, BOQs, and scopes.</p><br><br></li><li><p>Prepare material take-offs and BOQs for:</p><br><br><ul><li><p>Fire Alarm and Detection Systems</p><br><br></li><li><p>Emergency and Exit Lighting Systems</p><br><br></li><li><p>Voice Evacuation and Public Address Systems</p><br><br></li></ul></li><li><p>Review architectural, electrical, reflected ceiling, and MEP drawings.</p><br><br></li><li><p>Select compliant equipment and materials.</p><br><br></li><li><p>Prepare costs for equipment, materials, installation, testing, and commissioning.</p><br><br></li><li><p>Develop proposals, quotations, compliance statements, and tender clarifications.</p><br><br></li><li><p>Coordinate with Sales, Design, Engineering, Procurement, and Project teams.</p><br><br></li><li><p>Identify discrepancies, exclusions, assumptions, qualifications, and variations.</p><br><br></li><li><p>Obtain supplier pricing, technical information, and product availability.</p><br><br></li><li><p>Prepare supplier comparisons and support negotiations.</p><br><br></li><li><p>Propose compliant value-engineering alternatives.</p><br><br></li><li><p>Update estimates for addenda, revised drawings, and comments.</p><br><br></li><li><p>Maintain price, supplier, estimation, and historical-cost databases.</p><br><br></li><li><p>Support handover with approved quotations, BOQs, and documentation.</p><br><br></li></ul>Technical Knowledge<ul><li><p>Addressable and Conventional Fire Alarm Systems</p><br><br></li><li><p>Fire Detection and Alarm Systems</p><br><br></li><li><p>Emergency and Exit Lighting Systems</p><br><br></li><li><p>Central Battery and Self-Contained Emergency Lighting Systems</p><br><br></li><li><p>Voice Evacuation and Emergency Public Address Systems</p><br><br></li><li><p>Cause-and-Effect Matrix requirements</p><br><br></li><li><p>BMS, HVAC, Access Control, Firefighting, and ELV interfaces</p><br><br></li><li><p>NFPA 72, BS 5839, IEC standards, and relevant codes</p><br><br></li><li><p>UAE Civil Defence regulations</p><br><br></li><li><p>AutoCAD and Microsoft Office applications</p><br><br></li><li><p>Estimation or ERP software and Excel costing tools</p><br><br></li></ul>Qualifications and Experience<ul><li><p>Bachelor’s degree or diploma in Electrical, Electronics, Electronics and Communication Engineering, or a related discipline.</p><br><br></li><li><p>3–7 years of estimation experience in Fire and Life Safety or ELV systems.</p><br><br></li><li><p>UAE or GCC experience preferred.</p><br><br></li><li><p>Knowledge of BOQs, material take-offs, costing, tender estimation, and supplier negotiation.</p><br><br></li><li><p>Ability to interpret technical drawings, specifications, and tender documents.</p><br><br></li><li><p>Strong analytical, communication, coordination, and commercial skills.</p><br><br></li><li><p>Attention to detail and ability to meet multiple tender deadlines.</p><br><br></li></ul>Key Deliverables<ul><li><p>Accurate BOQs and material take-offs</p><br><br></li><li><p>Competitive estimates and quotations</p><br><br></li><li><p>Technical compliance statements</p><br><br></li><li><p>Supplier quotation comparisons</p><br><br></li><li><p>Tender clarifications, assumptions, and exclusions</p><br><br></li><li><p>Value-engineering proposals</p><br><br></li><li><p>Final estimation and handover documentation</p><br><br></li></ul> <br><br> </div>

<ul><li>Prospecting, identifying potential Clients & closing deals successfully</li><li>Develop constant good business relationship & build trust with Clients</li><li>Creating, implementing & executing Budgets</li><li>Advise Clients for a Solution or a better Solution</li><li>Negotiate & Attend site visits whenever required or requested by Clients</li><li>Coordinate with Pre-Sales Engineer & Engineering Department on all Technical solutions</li><li>Promote continuous improvement in selling & exceeding customer satisfaction through incorporation of engineering team and client feedback and competitor’s experience</li><li>Coordinate project schedules, resources, equipment and information</li><li>Liaise with clients to identify and define project requirements, scope and objectives</li><li>Ensure clients’ needs are met as the project evolves</li><li>Responsible for planning and directing of work</li><li>Maintain and extend excellent relations with clients and co-workers</li><li>Ensure business is carried out as per company’s set quality objectives</li><li>Supervision and delegation of tasks</li><li>Develop positive and energetic attitude</li><li>Develop strategies to improve overall quality and productivity</li><li>Apply strong background knowledge in technical engineering solutions</li><li>Review and approve preparation of accounting analysis for budgetary planning and implementation, production efficiency, financial reporting, budgetary planning and submittal for capital expenditures</li><li>Coordinate project management activities, resources, equipment and information</li><li>Break projects into doable actions and set timeframes</li><li>Assign tasks to internal teams and assist with schedule management</li><li>Help prepare budgets</li><li>Analyze risks and opportunities</li><li>Oversee project procurement management</li><li>Monitor project progress and handle any issues</li><li>Act as point of contact and communicate project status to all participants</li><li>Work with Project Manager to eliminate blockers</li><li>Use tools to monitor working hours, plans and expenditures</li><li>Issue appropriate legal paperwork (contracts and terms of agreement)</li><li>Create and maintain comprehensive project documentation, plans and reports</li><li>Ensure standards and requirements are met through conducting quality assurance tests</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience in sales & marketing</li><li>Ability to prepare and interpret flowcharts, schedules and step-by-step action plans</li><li>Solid organizational skills, including multitasking and time-management</li><li>Strong client-facing and teamwork skills</li><li>Familiarity with risk management and quality assurance control</li><li>PMP / PRINCE2 / SIX SIGMA certification is a plus</li><li>Management experience of 3 years (Preferred)</li><li>Fire & Security Systems experience of 5 years (Preferred)</li><li>Arabic language proficiency (Preferred)</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking a detail-oriented and analytical Civil Inspector to join our team in Dubai, United Arab Emirates. As a Civil Inspector, you will play a crucial role in ensuring the quality and compliance of our infrastructure and road projects.</p><br><ul><li>Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance.</li><li>Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation.</li><li>Verifies equipment settings, alignment, testing and energization requirements.</li><li>Be familiar with the project’s detailed drawings, specifications, and health and safety measures together with any associated updates.</li><li>Ensure the contractor/s compliance with the standards and specifications of the contract documents.</li><li>Maintain records of the contractor human and equipment daily resources.</li><li>Undertake all site supervision and inspections when required or instructed by the Resident Engineer (RE) or the Assistant Resident Engineer (ARE).</li><li>Liaise and daily follow up with the contractor. This is to ensure the contractor is managing its resources, health and safety, and equipment needs on the site.</li><li>Prepare daily report to the RE or ARE. This includes works orders, materials delivery, and daily inspections program.</li><li>Follow up and implement any site instructions made by the RE and ARE.</li><li>Apply and implement all quality controls and quality procedures of the site.&nbsp;</li><li>Prepare any site measurements and surveying checks needed by the RE or ARE for pipes alignments and levels.</li><li>Co-ordinate and co-operate with client project manager during their site inspections in the presence of the RE or ARE.</li><li>Assist the ARE and RE in the preparation of any correspondences in compliance with the contract documents and site requirements.</li><li>Where site problems are found, work with the RE or ARE to resolve them promptly.</li><li>Monitor the start-up, commissioning and handover of the site works. Including maintaining records of the project milestones.</li><li>Maintain records of materials tests performed and executed works.</li><li>Audit inspections for conformity to contract documents and contractor submitted plans.</li></ul><br>Qualifications<br><ul><li>Bachelor's Degree or Diploma in Civil Engineering.</li><li>Minimum 7 years of experience in similar infrastructure and road projects, with at least 3 years of experience in the UAE.</li><li>In-depth knowledge of construction practices, building codes, and regulations in the UAE.</li><li>Strong familiarity with contract documents, detailed drawings, and project specifications.</li><li>Proficiency in conducting site inspections, quality control, and quality assurance procedures.</li><li>Excellent skills in site measurements and surveying checks.</li><li>Strong analytical and problem-solving abilities.</li><li>Proficient in project management software and MS Office Suite.</li><li>Outstanding report writing and communication skills.</li><li>Ability to work effectively in a fast-paced, dynamic environment.</li><li>Strong attention to detail and organizational skills.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>Start Your Journey With Us&nbsp;<br>From the very first opening of the St. Regis New York, St. Regis has stood as a symbol of uncompromising elegance and bespoke service. As the original house of luxury, St. Regis continues to redefine modern luxury through great service. The St. Regis Abu Dhabi merges authentic Arabian hospitality with more than a hundred years of bespoke St. Regis tradition.&nbsp;<br>Crafted for modern connoisseurs who desire exceptional experiences, The St. Regis Abu Dhabi is the social epicenter for royalty, discerning travelers and luminaries in the art of living. The hotel comprises of 283 elegantly appointed guest rooms including 55 suites, most of which boast breathtaking views of the Arabian Gulf and Abu Dhabi city, including the extraordinary Abu Dhabi Suite – the highest suspended suite in the world, connecting the two Nation Towers.<br>The St. Regis is part of Marriott International, a brand leader, offering the most powerful portfolio in the industry, our more than 30 leading brands and nearly 9,100 properties in 142 countries and territories give people more ways to connect, experience and expand their world. At the heart of The St. Regis, our exceptional staff whom we address as "Hosts," are the ultimate luxury ambassadors, dedicated to providing our guests with an exquisite stay and unforgettable experiences. Pursue your passion and grow your expertise at Abu Dhabi’s best address—The St. Regis Abu Dhabi, the house of luxury who is awarded with the prestigious Forbes Travel Guide 5-Star Rating.<br>Job Requirement:<br>POSITION PURPOSE<br>The Kitchen and refrigeration technician is responsible for the maintenance of kitchen and laundry equipment and related appliances in the hotel and makes sure overall equipment are in greatest condition.&nbsp;<br>ESSENTIAL FUNCTIONS :&nbsp;<br>Attend daily briefing&nbsp;<br>Performs major and/or minor repair and maintenance of kitchen equipment including hot cooking and refrigeration equipment as well Laundry equipment.<br>Follow the routine Preventive&amp; corrective Maintenance task activity of kitchen &amp; laundry equipment and recorded accordingly. All electrical and gas operated equipment to be repaired and maintained at high standard.<br>Make sure all kitchen &amp; laundry equipment in proper and in good working condition.&nbsp;<br>Responsible for coordination and prioritizing repair tasks to respond in a timely manner and provide timely repairs and reduced downtime.&nbsp;<br>Implement the task activity in Restaurant, Back of House, Kitchen and Laundry equipment and others hotel area for troubleshooting or routine Preventive Maintenance activity.<br>Handle the routine checklist for overall kitchen compliance in the property with HACCP and hygiene standards<br>Maintain all lighting in laundry &amp; kitchen area including lighting at cold rooms, fridge etc<br>Update daily performance and follow up in Log Book<br>Perform any other duties that may be assigned to him<br>Able to work any shift that is assigned to him by Management or Supervisor<br>Assist to others section or technician in overall activity, especially for electrician<br>Assist Duty Engineer to re-stock the daily consumable material in workshop area such as Essential and consumable material<br>Order and maintain inventory of equipment spare parts as needed<br>Responsible for attending new equipment training.<br>Training and demonstrating team members in the proper safe use and operation of equipment.&nbsp;<br>Inspect and verify the operation and safety of commercial kitchen appliances.&nbsp;<br>Knowledge of commercial refrigeration and kitchen equipment<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: 2 years work experience as Kitchen Technician<br>Experience in hotel engineering or maintenance a plus.<br>#LI-MA1<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Combining timeless glamour with a vanguard spirit, St. Regis Hotels &amp; Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<ul><li>Lead and supervise a team of electrical testers, ensuring adherence to safety protocols and quality standards during all testing procedures.</li><li>Develop and implement comprehensive electrical testing plans and schedules for various projects, optimizing resource allocation and timelines.</li><li>Oversee the accurate calibration and maintenance of all testing equipment, guaranteeing reliable and precise measurements.</li><li>Interpret complex electrical schematics, blueprints, and technical specifications to guide testing activities and troubleshoot issues.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering or a related field from a recognized institution.</p></li><li><p>Minimum of 5-7 years of progressive experience in electrical testing, with a strong focus on industrial or power systems.</p></li><li><p>Possession of relevant certifications such as Certified Electrical Safety Professional (CESP) or equivalent is highly advantageous.</p></li><li><p>Demonstrated expertise in testing high voltage equipment, protection relays, and power systems up to 132kV or higher.<br><br></p><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in construction (not design), Pipeline / Oil & Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.<br></p><p><strong>Age Criteria:</strong></p><p>Maximum age limit is 49 years</p><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience<br></p><p><strong>Managerial and SR. Positions:</strong></p><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory<br></p><p><strong>Interview Date: </strong>Mumbai - 09th Aug 2026, Sunday, Chennai - 12th Aug 2026, Wednesday & Kochi - 16th Aug 2026, Sunday - Reporting time – 08:30 AM to 12:00 PM & 2:30 PM to 3:30 PM<br></p><p><strong>Mumbai - Mirage Hotel,</strong></p><p>Mumbai International Airport Approach Road, Near Marol Aqua Metro Stn. Andheri (East), Mumbai, Maharashtra, India – 400 059.</p><p>Waiting Hall – Amber Hall<br></p><p><strong>Chennai - The Residency Towers,</strong></p><p>115, Sir Thyagaraya Road, Chennai 600017</p><p>Waiting Hall – Senator Hall<br></p><p><strong>Kochin - Crowne Plaza Kochi,</strong></p><p>XI 641A Kundanoor Junction, NH-47 Bypass</p><p>Maradu, Ernakulam, Kerala, India, 682305</p><p>Waiting Hall – Onam Hall</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>· </p><br><p>&nbsp;Reading and understanding the package contract documents, detailed drawings, specifications, and health and safety measures, together with any associated updates.</p><br><p>· Ensuring the contractor(s) are complying with the standards and specifications of the contract documents through observation, measurements, and testing as well as tracking quality assurance progress.</p><br><p>· Maintaining records of the contractor manpower and equipment daily resources.</p><br><p>· Undertaking all site supervision and inspections when required or instructed by the Resident Engineer (RE) or the Assistant Resident Engineer (ARE).</p><br><p>· Documenting, in the areas assigned to the Inspector, the contractor’s personnel and equipment, activities observed, location of activities, reason for activities, and means and methods utilised.</p><br><p>· Additionally, report on materials delivery and following and implementing any site instructions made by the leader. Apply and implement all quality controls and quality procedures of the site.</p><br><p>· Follow up and implement any site instructions made by the leader.</p><br><p>· Apply and implement all quality controls and quality procedures of the site.</p><br><p>· Prepare any site measurements and surveying checks needed by the leader</p><br><p>· Monitoring conformance to quality, performance, and/or code requirements by performing inspection duties.&nbsp;</p><br><p>· Monitor Health and Safety of the construction works and report on violations</p><br><br>Qualifications<br><ul><li>Site experience in basic design requirements, estimation, installation and all site activities related to all Structural works for construction of large-scale building projects.</li></ul><ul><li>Familiar with all the Structural Engineering methodologies as well as the corresponding equipment, materials, consumables, tools and manpower allocations related to Structural works for building projects.</li><li>Well versed in interpreting and executing Structural related drawings.</li><li>Have the knowledge of the related authorities requirements</li><li>High-Rise Residential and Commercial buildings experience required with strong background in start-up, execution and handover of major projects.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>The following are specific responsibilities and contributions critical to the successful performance of the position:<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment (e.g., boilers, chillers, and air handling units/controls), including charging refrigeration systems, replacing air filters, and cleaning coils.<br>Test and record boiler, condenser, and open/closed loop systems water quality and take any necessary corrective action such as adding chemicals to prevent corrosion and harmful deposits&nbsp;<br>Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners<br>Carry out minor Plumbing &amp; Mechanical works for HVAC systems &amp; Equipment, as required<br>Monitor and inspect HVAC Plant/Equipment, BMS computer terminals &amp; outstations, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions, and to ensure that equipment is operating efficiently and safely<br>Maintain engineering area is safe, kept clean and in an orderly manner. Keep close coordination with other engineering staff for smooth operation.&nbsp;<br>Participate in departmental meetings and training etc.&nbsp;<br>Assist in energy conservation programme, follow up with banquet staff to save electricity and air conditioning when meetings are over.&nbsp;<br>Comply with hotel and corporate LSOP’s and SOP’s.&nbsp;<br>To attend all safety and fire training and adhere to safety instructions at work to prevent any accidents.&nbsp;<br>Document all work performed and any spares used.<br>Serve as an active member of hotel emergency response team.&nbsp;<br>Carry out any requests asked of you by your immediate supervisor.<br>Take active role in the TQM process.&nbsp;<br>To ensure that you maintain a high level of hospitality and guest concern. Practice at all times “Empowerment” and do whatever it takes to satisfy the guest.&nbsp;<br>Accident prevention and safety to be aware of all existing departmental job safety analysis and to strive to work in an accident free manner and to create a safe working environment for himself and for others.&nbsp;<br>Maintain high standard of GSS and Brand standard for guest rooms and related areas.&nbsp;<br>To carry out other job assignments given by DOE or designate, as business demands.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Company Description<br><br>Raffles Hotels & Resorts<br><br>The Birthplace of stories and legends since 1887, Raffles is a legendary brand, steeped in history and loved by generations past, present and future. Raffles, at distinguished landmark addresses around the world, is the vibrant heart of its destination, curating experiences that are culturally enriching, intellectually stimulating and always respectful of local communities, heritage and the environment.<br><br>Raffles Dubai<br><br>An architectural surprise inspired by an Egyptian aesthetic, 5-star Raffles Dubai offers the luxury of city-centre space, impeccable service and sophisticated Asian style. A 15-minute drive from Dubai International Airport, it is ideally located in the business and shopping district, adjacent to Wafi Mall and close to the magnificent Khan Murjan souk and the convention centres.<br><br>About The Application Process<br><br>At Raffles, we want to bring out your highest potential. Shortly after applying, you will receive an email from our partner Assess First prompting you to create a profile and complete a questionnaire. This is a mandatory step for your candidacy to be considered as it enables us to explore your compatibility with this role and our culture of luxury excellence.<br><br>Job Description<br><br>We invite you to join the world of luxury hospitality at Raffles Dubai as our new Ken Fix-It Technician responsible for carrying out preventive and corrective maintenance of guestrooms to ensure all facilities, equipment, and fixtures are maintained in excellent operating condition and in accordance with hotel quality, safety, and brand standards. The role requires a multi-skilled technician capable of performing civil, electrical, plumbing, HVAC, and general maintenance works while ensuring minimal disruption to hotel operations and guest satisfaction. This position reports to Engineering Manager.<br><br>Key Responsibilities<br><br>Carry out scheduled Preventive Maintenance (PPM) of guestrooms in accordance with the approved maintenance programme. Perform multi-skilled maintenance including civil, electrical, plumbing, HVAC, carpentry, painting, and minor furniture repairs. Carry out repairs such as grouting, silicone replacement, paint touch-ups, door hardware adjustments, furniture touch-ups, plumbing fixture repairs, electrical troubleshooting, Guest Room Management Systems (GRMS) device troubleshooting, curtain systems, Fun Coil Unit (FCU) servicing, filter replacement, actuator replacement, chilled water condensation flushing, and other guestroom maintenance activities. Inspect guestrooms thoroughly during PPM and identify defects requiring corrective action. Ensure all maintenance work is completed to a high standard with quality workmanship and attention to detail. Complete maintenance records accurately and update work orders upon completion. Ensure all tools, materials, and spare parts are available before commencing work and maintain good housekeeping after completing tasks. Report recurring defects, equipment failures, or major repairs requiring specialist intervention. Comply with all hotel health, safety, environmental, and engineering procedures while maintaining a professional appearance in guest areas. Support other engineering team members and perform additional duties as assigned by the Engineering Manager.<br><br>Qualifications<br><br>What will you bring to this role? <br><br>Education, Qualifications & Experience<br><br>Diploma or Trade Certificate in Mechanical, Electrical, Air Conditioning, Building Maintenance, or a related technical discipline. Minimum 3 years' experience in hotel engineering or facilities maintenance, preferably within a luxury hotel environment. Good command of written and spoken English. Embrace the Raffles brand promise and luxury in your role and in all your interactions. Foster an inclusive environment where every individual feels valued and respected <br><br>Skills & Competencies<br><br>Strong knowledge of guestroom preventive maintenance across civil, electrical, plumbing, HVAC, and carpentry disciplines. Working knowledge of Guest Room Management Systems (GRMS) and hotel room equipment. Good troubleshooting and problem-solving skills. Ability to work independently with minimal supervision. Strong attention to detail and commitment to quality workmanship. Good communication, teamwork, and time management skills. Safety-conscious with a proactive and guest-focused attitude.<br><br>Additional Information<br><br>Employee Benefits<br><br>Join our team and enjoy a range of exclusive colleague perks, including complimentary upgrades, extended stays, discounted stays across Fairmont & Raffles properties, special dining and wellness discounts, and added luxuries to enhance your experience. We believe in taking care of our team, ensuring that your hard work is rewarded with exceptional benefits.<br><br>Our Values<br><br>Respect<br><br>We value the needs, ideas and individuality of others. We treat everyone with fairness and dignity.<br><br>Excellence<br><br>We make genuine connections, and we cherish every opportunity to make the people around us feel special.<br><br>Belonging<br><br>We celebrate our differences. We support each other and we always stand together.<br><br>Empowerment<br><br>We have authority to take initiative and anticipate moments that create unforgettable experiences.<br><br>Integrity<br><br>We build trust through mutual respect and being authentic.<br><br>Diversity & Inclusion<br><br>Raffles is committed to creating an inclusive environment where diverse talent thrives. We welcome candidates from all backgrounds to join our team.

<p>Immediate Hiring: *<strong>Outdoor Technician</strong>*<br>Location: <strong>Sharjah (Al Sajaa Indl Area).</strong></p><p>A Technician for beauty and salon equipment repairs electrical and electronic devices like hair dryers, facial steamers, and laser machines. They test systems, solder circuit boards, replace broken parts, and ensure safety standards. The role requires an electronics diploma or related technical certification and at least two years of experience.<br></p><p><strong>Job Details</strong></p><p>Job Purpose - <strong>Fix broken salon tools, Test electrical safety, Keep repair logs,</strong> Help staffs with tech problems.</p><p>Main Duties - F<strong>ind faults in salon machines, Fix or swap bad parts, Solder wires and boards, Run safety tests, Order spare parts.</strong></p><p>Skills and Rules - <strong>Know basic electronics, Read wiring diagrams, Use tools like multi-meters, Lift heavy salon items</strong>, Talk well with clients.</p><br><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electronics or similar.</p><p>Experience fixing small appliances and worked in Service centers</p><p>Ability to read wiring diagrams.</p><p>Good communication skills.</p><p><strong>UAE Driving License MUST for Outdoor Technician</strong>.</p>

<p><strong>Key Responsibilities</strong></p><ul><li><p><strong>Sorting:</strong> Separate items by color, fabric type, dirt level, and required cleaning method.</p></li><li><p><strong>Loading and Unloading:</strong> Put sorted items into industrial washers, extractors, or dryers and remove them when finished.</p></li><li><p><strong>Chemical Management:</strong> Add precise amounts of water, soap, detergents, bleach, or other chemical agents based on material needs.</p></li><li><p><strong>Machine Operation:</strong> Set and monitor wash cycles, water temperatures, steam valves, and rotation speeds.</p></li><li><p><strong>Quality Check & Pre-Treatment:</strong> Spot-clean tough stains or pre-soak delicate items before the main wash.</p></li><li><p><strong>Maintenance:</strong> Clean equipment, lubricate moving parts, and perform basic troubleshooting or minor repairs.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications and Skills</strong></p><ul><li><p><strong>Education:</strong> High school diploma or an equivalent basic education.</p></li><li><p><strong>Physical Strength:</strong> Ability to stand for long shifts, work in warm or humid environments, and lift heavy loads of wet or dry laundry.</p></li><li><p><strong>Attention to Detail:</strong> Good eyesight and color perception to spot stains and prevent fabric damage.</p></li><li><p><strong>Safety Awareness:</strong> Knowledge of workplace safety rules when handling hot water, steam, and industrial chemicals</p></li></ul>

<p>Immediate Hiring: *<strong>Indoor Technician / Outdoor Technician</strong>*</p><p>Location: Sharjah (Al Sajaa Indl Area).<br></p><p>A Technician for beauty and salon equipment repairs electrical and electronic devices like hair dryers, facial steamers, and laser machines. They test systems, solder circuit boards, replace broken parts, and ensure safety standards. The role requires an electronics diploma or related technical certification and at least two years of experience.<br></p><p><strong>Job Details</strong></p><p>Job Purpose - Fix broken salon tools, Test electrical safety, Keep repair logs, Help staffs with tech problems.</p><p>Main Duties - Find faults in salon machines, Fix or swap bad parts, Solder wires and boards, Run safety tests, Order spare parts.</p><p><strong>Skills and Rules - Know basic electronics, Read wiring diagrams, Use tools like multimeters, Lift heavy salon items, Talk well with clients.</strong></p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electronics or similar. <br>Experience fixing small appliances and worked in Service centers <br>Ability to read wiring diagrams. <br>Good communication skills. <br><strong>UAE Driving License MUST for Outdoor Technician.</strong></p>