Heavy equipment mechanical engineer Jobs

JOB SUMMARY:Minimum of 4 to 15 years of experience in Design and Engineering of GIS and AIS Substations projects for voltage level of 66 KV and above up to 765 KV. Key Accountabilities:Pre-Bid:· Carrying out HV/ EHV substation design and drawings for both AIS and GIS substations<br>Preparation of equipment specification, layout drawings and calculations (Short circuit force, Earthing, Direct lightning stroke protection, Conductor sizing, CT / CVT sizing, battery sizing etc.), sizing for the equipment designs and systems <br>BOQ preparation· Knowledge of standards (IEC, IEEE, ANSI). Experience in substation designs from 66k V to 765k V<br>EHV substation designs, Switchyard layouts, Switchyard equipment designs experience is must.· Knowledge of Auto Cad software is must.· Knowledge of Software like ETAP, CDEGs etc. will be preferable.· Must be able to work independently for the jobs.· Person should possess good communication skills and able to discuss issues with customer / vendor Execution of Contract:<br>· Shall be able to prepare/guide the design team to be able to prepare the SLD, general arrangement drawings, electrical layout, sections, EKD, DSLP, Earthing Layout, cable trench layout, switch yard illumination, cable schedule, bill of materials (BOMs) etc. Should be well versed with various busbar schemes.· Should be able to review the equipment vendor’s drawings/documents. Should also be able to guide the design team to review the equipment vendor’s drawings.· Should be able to interface with control and protection requirements and knowledge of review of schemes is desirable.· Should be well versed with design calculation for Earthing design, Sag tension, DSLP, Short circuit forces, battery sizing calculation, equipment sizing etc.· Should be able to closely monitor the progress of work (both Projects as well as tender) of the design team. Should also ensure that the projects/tender deliverables are given on time, without delay.· Should be able to handle/monitor the draftspersons. Should be able to co-ordinate with civil design engineers wherever interfaces. <br> Qualification: BE/BTech - Electrical(Regular)<br>Experience: Min. 4 Years Candidate must have experience in Substation Design.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We're looking for a detail-oriented and collaborative Assistant Resident Engineer to join our dynamic team in Al Ain, United Arab Emirates. In this role, you will provide essential technical support to the Resident Engineer and project team, ensuring that all construction works meet statutory requirements, contractual obligations, and quality standards. You will be instrumental in maintaining site compliance, coordinating between contractors and design teams, and documenting all construction activities with precision and professionalism. This is an excellent opportunity to develop your engineering expertise while contributing to significant construction projects in a supportive and innovative work environment.</p><br><ul><li>Assist the Resident Engineer in performing statutory duties and technical competent person requirements as mandated by local regulatory authorities in the UAE</li><li>Conduct regular on-site inspections to verify that construction works comply with approved plans, method statements, and safety protocols</li><li>Review and analyze contractor-proposed construction sequences, temporary works, and late-cast openings to ensure structural integrity and feasibility</li><li>Monitor and support the work of the contractor's technical competent persons, providing guidance and ensuring adherence to project standards</li><li>Serve as a liaison between the contractor, site team, and design office, facilitating clear communication and timely resolution of construction-related issues</li><li>Identify and document non-conformities with transparency and detail, escalating issues to the Resident Engineer and relevant stakeholders</li><li>Implement and monitor quality assurance and quality control (QA/QC) systems, site safety protocols, and environmental management practices</li><li>Prepare and contribute to comprehensive site reports, inspection records, defect reports, and QA/QC documentation on a regular basis</li><li>Maintain organized and accessible filing systems for all correspondence, site records, construction drawings, and regulatory approvals</li><li>Attend site progress meetings, QA/QC meetings, and other project-related meetings, actively contributing to collaborative problem-solving</li><li>Enforce compliance with ethics policies, including third-party payment procedures, sub-consultancy engagement processes, and organizational guidelines</li><li>Demonstrate flexibility and resilience by performing additional duties as assigned by the Resident Engineer or project management team</li></ul><br>Qualifications<br><p>**Required Qualifications:**</p><br><ul><li>Bachelor's degree in Civil Engineering, Structural Engineering, or Geotechnical Engineering; or equivalent higher diploma/certificate in civil or structural engineering</li><li>Minimum 2 years of relevant post-degree experience in civil or structural engineering on construction projects; or minimum 5 years of relevant experience post higher diploma</li><li>Demonstrated experience with superstructure works, civil drainage systems, and site formation activities</li><li>Strong knowledge of construction compliance, statutory requirements, and regulatory standards</li><li>Proficiency in site inspection, quality assurance, and quality control methodologies</li><li>Excellent written and verbal communication skills in English</li><li>Proficiency in site documentation, report writing, and record-keeping systems</li><li>Strong organizational and time management skills with meticulous attention to detail</li><li>Ability to analyze construction drawings, method statements, and temporary works designs</li><li>Demonstrated ability to work effectively in multicultural and collaborative team environments</li><li>Proficiency with digital documentation tools and construction management software</li></ul><p>**Preferred Qualifications:**</p><br><ul><li>Technical Competent Person (TCP) certification or equivalent statutory qualification</li><li>Experience with geotechnical engineering or geotechnical-heavy building projects</li><li>Experience working on large-scale infrastructure or commercial building projects in the Middle East</li><li>Knowledge of UAE-specific building codes and regulatory requirements</li><li>Familiarity with health, safety, and environmental (HSE) standards and best practices</li><li>Problem-solving mindset with the ability to make decisive recommendations under pressure</li><li>Experience managing stakeholder relationships and coordinating between multiple teams</li><li>Demonstrated ability to work efficiently under tight deadlines and challenging conditions</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Assists in the preparation of quality documentation, including the Inspection &amp; Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Welding works.</p></li><li><p>Monitors all phases and processes required for the effective completion of all related Welding works and in particular issues of design, procurement, construction and final hand over of the related Welding works.</p></li><li><p>Monitors the implementation of Method Statements, and, Inspection &amp; Test Plans related to Welding works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.</p></li><li><p>Manages the inspection and testing of Welding works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.</p></li><li><p>Monitors the close out of punch lists established for incomplete related to Mechanical works.</p></li><li><p>Monitors all measurement &amp; testing instruments employed for Welding works, that they are functional and calibrated.</p></li><li><p>Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.</p></li><li><p>Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Mechanical works.</p></li><li><p>Statistical analysis and evaluation of test data related to Welding works.</p></li><li><p>Prepares, files, maintains test/inspection records and any other quality records generated related to Welding works.</p></li><li><p>Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Welding works.</p></li><li><p>Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.</p></li><li><p>Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.</p></li><li><p>Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Civil works.</p></li><li><p>Where required, assists in the preparation of final document for certification.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical or&nbsp;Metallurgy Engineering with Master's Degree in Welding</p></li><li><p>at least 15 years of related experience (ADNOC experience will be an advantage).</p></li><li><p>Professional certification in welding engineering (IWE, CWE)</p></li><li><p>ASNT Level II in RT, UT, MT and PT</p></li><li><p>Certified ISO 9001:2015 Internal auditor.&nbsp;lead auditor is preferred&nbsp;</p></li><li><p>Certified 3.1 CSWIP required, 3.2 is preferred</p></li><li><p>Knowledgeable in Welding Process, Welding Procedure Qualification in line with ASME SEC IX, AWS D1.1, API 1104, ISO 13847, SHELL DEP, ADNOC specifications.</p></li><li><p>Familiar with Welding defect identification and root causes with control measures to prevent occurrence, hands on welding training for implementation contractor and vendor welding teams,</p></li><li><p>Well versed in monitoring of welding repair data and welder performance. Shall be conversant with resolution of site welding issues including selection of welding consumable based on various material groupings.</p></li><li><p>Ability to optimize welding procedure qualification based on material standard and production thickness</p></li><li><p>Oil &amp; Gas EPC Projects experience.</p></li></ul><p><br></p><p><strong>Note: </strong>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b><span>Overview</span><p>The Lead Engineer – Systems plays a critical role in the design, integration, testing, and validation of complex rail systems, including signalling, communications, power, and rolling stock interfaces. This role ensures that all subsystems work together seamlessly to meet safety, performance, and regulatory requirements throughout the project lifecycle.</p><br><span>Your Role</span><ul><li>Develop and manage system requirements, specifications, and interface definitions.</li><li>Coordinate integration of subsystems (e.g., signalling, SCADA, telecom, traction power) into a cohesive rail system.</li><li>Support system architecture design and ensure compliance with applicable standards and client requirements.</li><li>Conduct system-level analysis, modelling, and simulations to validate performance and safety.</li><li>Participate in design reviews, hazard analysis, and risk assessments.</li><li>Support testing and commissioning activities, including system integration testing and acceptance.</li><li>Liaise with multidisciplinary teams including civil, electrical, mechanical, and software engineers.</li><li>Ensure traceability of requirements through the V-model or similar systems engineering frameworks.</li><li>Prepare technical documentation, reports, and presentations for stakeholders.</li><li>Assist in resolving technical issues during design, construction, and commissioning phase</li></ul><span>About You</span><ul><li>Bachelor’s or Master’s degree in Systems Engineering, Electrical Engineering, Electronics, or related field.</li><li>10-13 years of experience in systems engineering, preferably in rail or transportation projects.</li><li>Familiarity with rail systems such as CBTC, ETCS, PTC, or conventional signalling.</li><li>Experience with systems engineering tools such as DOORS NG, MBSE Tools such as IBM Rhapsody and Sparx Enterprise Architect</li><li>Experience with practical application of System Engineering processes and EN 15288 standard - developing, documenting and evidencing systems integration activities across the complete asset / project lifecycle.</li><li>Knowledge of international standards (e.g., ISO/IEC 15288, EN50126/8/9, INCOSE, IEC 61508).</li><li>Strong analytical, problem-solving, and communication skills.</li></ul><ul><li>INCOSE certification or equivalent systems engineering training.</li><li>MBSE Tools such as IBM Rhapsody</li><li>Experience with RAMS (Reliability, Availability, Maintainability, Safety) analysis.</li><li>Understanding of cybersecurity in rail systems.</li><li>Experience working on large-scale infrastructure or metro projects.</li></ul><span>Rewards &amp; Benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes: </span></p><br><ul><li><span>Comprehensive life insurance coverage.</span></li><li><span>Premium medical insurance for you and your dependents.</span></li><li><span>Generous annual leave balance.</span></li><li><span>Flexible and hybrid work solutions.</span></li><li><span>Remote work opportunities outside of country.</span></li><li><span>Company gratuity scheme.</span></li><li><span>Discretionary bonus program.</span></li><li><span>Relocation assistance.</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p><br><p>Find out more. &nbsp;&nbsp;&nbsp;</p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

About Us<br><br>Are you ready to shape how cutting-edge technologies are positioned, understood, and adopted by real markets? At Venture One, we build ventures and commercialize breakthrough technologies emerging from advanced research. Our focus spans Aerospace and Space, Security and Defense, Sustainability, Environment and Energy, and Transportation, with technologies across Cryptography, Secure Systems, Directed Energy, Advanced Materials, Autonomous Systems, and more.<br><br>About The Role<br><br>We are seeking a Simulation Engineer to support and enhance our digital manufacturing ecosystem by developing and maintaining Digital Twins and Process Simulations. This role focuses on leveraging tools such as Visual Components, DELMIA, and NVIDIA Omniverse to simulate, validate, and optimize production systems.<br><br>The ideal candidate will work at the intersection of manufacturing, automation, and data systems, enabling virtual commissioning, performance optimization, and scalable Industry 4.0 solutions across the factory.<br><br>Key Responsibilities<br><br>Develop and maintain 3D Digital Twins and Process Twins for manufacturing lines, cells, and factory layouts Build and run simulations using Visual Components, DELMIA, or equivalent platforms Perform cycle time analysis, throughput optimization, and bottleneck identification Support virtual commissioning of automation systems prior to physical deployment Simulate and validate robotic operations (reachability, collision detection, path optimization) Design and optimize factory layouts, material flow, and logistics systems (AGVs, conveyors, ASRS, OHT) Integrate simulation models with MES, SCADA, PLC, and IIoT platforms Utilize real-time and historical data for predictive and scenario-based simulations Collaborate with cross-functional teams including manufacturing, automation, and IT Contribute to continuous improvement and digital transformation initiatives <br><br>Minimum Qualifications<br><br>Bachelor’s degree in Mechanical Engineering, Mechatronics, Robotics, or related field 5+ years of experience in manufacturing simulation or industrial engineering Hands-on experience with Visual Components, DELMIA, or similar simulation tools Strong understanding of manufacturing processes (CNC, assembly, material handling) Basic knowledge of industrial automation systems (PLC, SCADA) Experience with 3D modeling and CAD tools (Solid Works, CATIA, NX, etc.) Familiarity with data handling and basic scripting (Python or similar) <br><br>Preferred Qualifications<br><br>Experience in robot simulation and offline programming (ABB, KUKA, FANUC) Exposure to AI/ML applications in manufacturing or simulation Experience with virtual commissioning and lights-out manufacturing environments Strong analytical and problem-solving skills with a focus on process optimization Knowledge of MES systems (e.g., DELMIA Apriso) and ERP integration (SAP) Understanding of IIoT architectures (MQTT, OPC UA, Unified Namespace) Experience with NVIDIA Omniverse or high-fidelity digital twin platforms <br><br>How To Apply<br><br>Are you ready to embark on an exciting journey with Venture One? If you're a visionary with a passion for innovation, we want to hear from you. To apply, please send your resume detailing your relevant experience and why you're the perfect fit for this role.<br><br>At Venture One, we believe that diverse perspectives drive innovation. We are committed to creating an inclusive and equal opportunity workplace. All qualified applicants will receive equal consideration for employment. Join us in shaping the future of business. Apply today and let's venture into a world of possibilities together!

About Us<br><br>Are you ready to shape how cutting-edge technologies are positioned, understood, and adopted by real markets? At Venture One, we build ventures and commercialize breakthrough technologies emerging from advanced research. Our focus spans Aerospace and Space, Security and Defense, Sustainability, Environment and Energy, and Transportation, with technologies across Cryptography, Secure Systems, Directed Energy, Advanced Materials, Autonomous Systems, and more.<br><br>About The Role<br><br>We are seeking a Simulation Engineer to support and enhance our digital manufacturing ecosystem by developing and maintaining Digital Twins and Process Simulations. This role focuses on leveraging tools such as Visual Components, DELMIA, and NVIDIA Omniverse to simulate, validate, and optimize production systems.<br><br>The ideal candidate will work at the intersection of manufacturing, automation, and data systems, enabling virtual commissioning, performance optimization, and scalable Industry 4.0 solutions across the factory.<br><br>Key Responsibilities<br><br>Develop and maintain 3D Digital Twins and Process Twins for manufacturing lines, cells, and factory layouts Build and run simulations using Visual Components, DELMIA, or equivalent platforms Perform cycle time analysis, throughput optimization, and bottleneck identification Support virtual commissioning of automation systems prior to physical deployment Simulate and validate robotic operations (reachability, collision detection, path optimization) Design and optimize factory layouts, material flow, and logistics systems (AGVs, conveyors, ASRS, OHT) Integrate simulation models with MES, SCADA, PLC, and IIoT platforms Utilize real-time and historical data for predictive and scenario-based simulations Collaborate with cross-functional teams including manufacturing, automation, and IT Contribute to continuous improvement and digital transformation initiatives <br><br>Minimum Qualifications<br><br>Bachelor’s degree in Mechanical Engineering, Mechatronics, Robotics, or related field 5+ years of experience in manufacturing simulation or industrial engineering Hands-on experience with Visual Components, DELMIA, or similar simulation tools Strong understanding of manufacturing processes (CNC, assembly, material handling) Basic knowledge of industrial automation systems (PLC, SCADA) Experience with 3D modeling and CAD tools (Solid Works, CATIA, NX, etc.) Familiarity with data handling and basic scripting (Python or similar) <br><br>Preferred Qualifications<br><br>Experience in robot simulation and offline programming (ABB, KUKA, FANUC) Exposure to AI/ML applications in manufacturing or simulation Experience with virtual commissioning and lights-out manufacturing environments Strong analytical and problem-solving skills with a focus on process optimization Knowledge of MES systems (e.g., DELMIA Apriso) and ERP integration (SAP) Understanding of IIoT architectures (MQTT, OPC UA, Unified Namespace) Experience with NVIDIA Omniverse or high-fidelity digital twin platforms <br><br>How To Apply<br><br>Are you ready to embark on an exciting journey with Venture One? If you're a visionary with a passion for innovation, we want to hear from you. To apply, please send your resume detailing your relevant experience and why you're the perfect fit for this role.<br><br>At Venture One, we believe that diverse perspectives drive innovation. We are committed to creating an inclusive and equal opportunity workplace. All qualified applicants will receive equal consideration for employment. Join us in shaping the future of business. Apply today and let's venture into a world of possibilities together!

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities</strong></p><ul><li><p><strong>Techno-Commercial Proposals:</strong> Prepare and submit comprehensive technical and commercial bids/quotations, ensuring alignment with client requirements and company profit margins.</p></li><li><p><strong>Engineering Calculations:</strong> Perform accurate load calculations, battery backup calculations, cable sizing, and hydraulic calculations (as applicable) for fire protection systems.</p></li><li><p><strong>Technical Compliance:</strong> Interpret complex tender documents, drawings, and specifications to ensure proposals meet DCD (Dubai Civil Defence) and NFPA standards.</p></li><li><p><strong>Estimation &amp; BoQ:</strong> Review Bills of Quantities (BoQ) and project scope, identifying cost-effective materials and labor requirements for accurate project costing.</p></li><li><p><strong>Technical Support:</strong> Serve as the technical point of contact for clients during the pre-sales phase, explaining system solutions, answering technical queries, and attending pre-bid meetings.</p></li><li><p><strong>Collaboration:</strong> Coordinate with vendors and procurement teams to obtain competitive material pricing and lead times for bid submissions.</p></li><li><p><strong>Market Intelligence:</strong> Stay updated on the latest fire safety products and competitor pricing to ensure our proposals remain market-competitive.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Required Qualifications &amp; Skills</strong></p><ul><li><p><strong>Education:</strong> Bachelor’s degree /Diploma in Electrical, Electronics, or Mechanical Engineering.</p></li><li><p><strong>Experience:</strong> 2+ years of experience in the UAE Fire &amp; Life Safety industry, with a focus on tendering and proposal engineering.</p></li><li><p><strong>Technical Proficiency:</strong></p><ul><li><p>Proficiency in <strong>AutoCAD</strong> and MS Office (Excel is critical for cost estimation), Plan swift</p></li><li><p>Strong ability to perform technical calculations for fire alarms, suppression systems, and pump sets.</p></li><li><p>In-depth knowledge of <strong>UAE Fire &amp; Life Safety Code of Practice</strong> and NFPA standards.</p></li></ul></li><li><p><strong>Commercial Acumen:</strong> Proven ability to translate technical specifications into compelling commercial offers.</p></li><li><p><strong>Communication:</strong> Excellent written and verbal English skills; ability to draft professional technical correspondences.</p></li><li><p><strong>Soft Skills:</strong> Strong analytical mindset, ability to work under strict tender deadlines, and high attention to detail.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary <p>We are looking for an experienced <strong>MEP Supervisor</strong> with a strong background in the <strong>Electro-Mechanical industry</strong>. The successful candidate will supervise mechanical, electrical, and plumbing (MEP) installation and maintenance works, ensuring projects are completed safely, on time, and in accordance with project specifications and quality standards.</p><br><br> Key Responsibilities <ul> <li>Supervise daily MEP activities at project sites.</li> <li>Coordinate mechanical, electrical, and plumbing installation works.</li> <li>Ensure work is carried out according to approved drawings, specifications, and project schedules.</li> <li>Supervise technicians, subcontractors, and site labor.</li> <li>Conduct site inspections to ensure quality and compliance with safety standards.</li> <li>Coordinate with project managers, engineers, consultants, and clients.</li> <li>Monitor project progress and resolve on-site technical issues.</li> <li>Ensure proper material planning and utilization.</li> <li>Prepare daily progress reports and site documentation.</li> <li>Ensure compliance with local regulations and company HSE policies.</li> </ul> <br> </div>

<p>We are seeking a Principal Avionics & Flight Control Systems Engineer to join an innovative eVTOL aircraft programme based in Dubai. This is a highly technical role focused on designing the aircraft's flight control system architecture and supporting the successful certification of safety critical avionics. Working closely with the Chief Engineer and multidisciplinary engineering teams, you will develop the detailed flight control system, define flight control architectures and produce the certification artefacts required for DO-178C DAL A compliance. This is an excellent opportunity to contribute to the development of a next generation aircraft from concept through certification. Key Responsibilities: • Develop detailed avionics and fly-by-wire flight control system architectures. • Design triple redundant flight control computer architectures, including voting logic, monitoring and cross-channel communications. • Define flight control modes, system states and transition logic for normal and degraded operating conditions. • Produce Interface Control Documents (ICDs) and systems integration documentation. • Develop DO-178C DAL A certification planning artefacts, including PSAC, SDP and SVP. • Collaborate with systems, software, hardware and safety engineering teams. • Support aircraft certification activities and regulatory compliance. • Apply ARP4754A/ARP4754B systems engineering principles throughout the development lifecycle. • Provide technical leadership across avionics and flight control system development.</p><p>We are looking for an experienced avionics and flight control systems engineer with extensive experience developing safety critical aircraft systems for certified aerospace programmes. Essential Requirements • Minimum 12 years' experience in avionics or flight control systems engineering. • Proven experience designing fly-by-wire flight control systems for certified aircraft. • Experience developing triple redundant flight control computer architectures. • Strong knowledge of DO-178C DAL A software certification. • Experience producing certification planning documentation including PSAC, SDP and SVP. • Experience authoring Interface Control Documents (ICDs). • Strong understanding of systems engineering and multidisciplinary integration. • Excellent technical communication and stakeholder management skills. Preferred Qualifications: • Experience applying ARP4754A or ARP4754B. • Experience with eVTOL, rotorcraft or advanced aircraft programmes. • Experience with over actuated flight control systems. • Bachelor's or Master's degree in Aerospace Engineering, Avionics, Systems Engineering or a related discipline.</p>

<p>We are seeking a Principal Avionics & Flight Control Systems Engineer to join an innovative eVTOL aircraft programme based in Dubai. This is a highly technical role focused on designing the aircraft's flight control system architecture and supporting the successful certification of safety critical avionics. Working closely with the Chief Engineer and multidisciplinary engineering teams, you will develop the detailed flight control system, define flight control architectures and produce the certification artefacts required for DO-178C DAL A compliance. This is an excellent opportunity to contribute to the development of a next generation aircraft from concept through certification. Key Responsibilities: • Develop detailed avionics and fly-by-wire flight control system architectures. • Design triple redundant flight control computer architectures, including voting logic, monitoring and cross-channel communications. • Define flight control modes, system states and transition logic for normal and degraded operating conditions. • Produce Interface Control Documents (ICDs) and systems integration documentation. • Develop DO-178C DAL A certification planning artefacts, including PSAC, SDP and SVP. • Collaborate with systems, software, hardware and safety engineering teams. • Support aircraft certification activities and regulatory compliance. • Apply ARP4754A/ARP4754B systems engineering principles throughout the development lifecycle. • Provide technical leadership across avionics and flight control system development.</p><p>We are looking for an experienced avionics and flight control systems engineer with extensive experience developing safety critical aircraft systems for certified aerospace programmes. Essential Requirements • Minimum 12 years' experience in avionics or flight control systems engineering. • Proven experience designing fly-by-wire flight control systems for certified aircraft. • Experience developing triple redundant flight control computer architectures. • Strong knowledge of DO-178C DAL A software certification. • Experience producing certification planning documentation including PSAC, SDP and SVP. • Experience authoring Interface Control Documents (ICDs). • Strong understanding of systems engineering and multidisciplinary integration. • Excellent technical communication and stakeholder management skills. Preferred Qualifications: • Experience applying ARP4754A or ARP4754B. • Experience with eVTOL, rotorcraft or advanced aircraft programmes. • Experience with over actuated flight control systems. • Bachelor's or Master's degree in Aerospace Engineering, Avionics, Systems Engineering or a related discipline.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a Civil Engineer with 5 years of experience in piling works to join our team.</p><p>Requirements:</p><p>· Bachelor’s Degree in Civil Engineering</p><p>· Minimum 5 years of hands-on experience in piling projects (bored piles, driven piles, shoring, etc.)</p><p>. Minimum of 2 years of hands-on experience working with Oracle Primavera P6.</p><p>· Strong knowledge of piling methods, QA/QC, and site execution</p><p>· Ability to coordinate with consultants, subcontractors, and site teams</p><p>· Familiar with project documentation, drawings, and method statements</p><p>Key Responsibilities:</p><p>· Supervise and manage piling site activities</p><p>· Ensure work is executed as per drawings, specifications, and safety standards</p><p>· Coordinate with project managers and technical teams</p><p>· Monitor progress, materials, and workmanship</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Piling &amp; foundation knowledge</b> — bored piles, CFA piles, shoring, contiguous/secant pile walls, pile testing and related foundation works.</p><p><b>Site execution &amp; supervision</b> — ability to plan daily activities, manage manpower/equipment and achieve production targets.</p><p><b>Drawing interpretation</b> — strong ability to read structural, piling and construction drawings.</p><p><b>AutoCAD</b> — should be able to review and make basic modifications to drawings.</p><p><b>Primavera P6 / MS Project</b> — planning, scheduling and progress monitoring.</p></div>

<p>Our International Main Contracting Client has a new requirement for a well experienced Technical Engineer to join their team in Dubai to work on high profile new build projects. Successful candidates will have a proven background as a Technical Engineer with strong knowledge in Architectural and Structural working and process working on high profile projects in the UAE with preference given to those with prior experience working for recognised Main Contracting Companies This role is available for immediate joining and is hiring on a temporary to permanent basis as an initial 6 month contract position, outsourced through J10 Consulting, with the option to transfer to staff after 6 months to suit all parties. Key Responsibilities: • Overseeing the technical aspects of construction projects, ensuring they are completed on time and within budget. • Collaborating with architects, engineers, and contractors to ensure project specifications are met. • Reviewing project plans and blueprints to identify potential issues and make recommendations for improvements. • Conducting regular site visits to monitor progress, resolve any technical issues, and ensure compliance with safety regulations. • Managing and maintaining project documentation, including drawings, contracts, and change orders. • Coordinating with subcontractors and suppliers to ensure timely delivery of materials and equipment. • Assisting in the preparation of project budgets and cost estimates. • Providing technical support and guidance to project teams, including resolving any technical problems that arise during construction. • Keeping up-to-date with industry best practices and new technologies to enhance project efficiency and quality. • Communicating effectively with stakeholders, including clients, contractors, and regulatory authorities, to ensure project success.</p><p>Technical Engineer Experience: • Degree or Diploma in Civil / Structural Engineering or Architecture • Minimum 5 years in civil construction, ideally at least 2 years previous experience in a recognised UAE main contractor company. • Experience in Technical Aspects of civil construction is essential • Proven track record of bridging the gap between the design and project teams to ensure constructability • Strong working knowledge of project management software, AutoCAD, BIM/Revit, and the MS Office Suite. • Exceptional problem-solving abilities, analytical skills, and the capacity to negotiate and communicate effectively with multiple stakeholders • Adaptability, ability to work under pressure, accepting to change, managing change at work.</p>

Waagner Biro Bridge Services is a leading engineering and construction company in the UAE, with over 50 years of experience delivering specialized infrastructure, bridge, and maintenance solutions across Dubai and the wider region. Renowned for its commitment to quality, innovation, and technical excellence, the company provides advanced engineering services tailored to the requirements of both government and private sector clients.<br><br>Backed by a highly experienced team of civil, mechanical, structural, and electrical engineers, Waagner Biro Bridge Services offers end-to-end project delivery, including design, construction, rehabilitation, and maintenance works. The company’s integrated approach, combined with its strong focus on safety, efficiency, and sustainability, has established it as a trusted partner for complex infrastructure and construction projects throughout the UAE.<br><br><br><br>Job Description<br><br>We're looking for a detail-oriented and collaborative Stakeholder Engineer to join our team in Dubai, United Arab Emirates. In this role, you will serve as a critical bridge between technical teams and diverse stakeholders, ensuring clear communication, alignment on project objectives, and successful delivery of engineering initiatives. As a UAE National, you will bring valuable local insights and cultural understanding to stakeholder engagement efforts across our organization.<br><br>Identify, map, and analyze stakeholders across engineering projects, assessing their interests, influence, and impact on project outcomes Develop and implement comprehensive stakeholder engagement strategies tailored to project phases and organizational objectives Facilitate effective communication between technical teams and non-technical stakeholders, translating complex engineering concepts into accessible language Gather, document, and analyze stakeholder requirements, feedback, and concerns, translating them into actionable technical specifications Monitor stakeholder satisfaction throughout project lifecycle and proactively address issues or escalations Coordinate with cross-functional teams including project managers, engineers, and business leaders to ensure stakeholder needs are integrated into project planning and execution Maintain detailed stakeholder registers and engagement logs, tracking interactions and outcomes Conduct stakeholder meetings, workshops, and presentations to communicate project progress, changes, and decisions Identify and mitigate stakeholder-related risks and manage expectations during project transitions or changes Provide recommendations for process improvements based on stakeholder feedback and engagement metrics<br><br><br>Qualifications<br><br>Proven experience in stakeholder management, engagement, or relationship coordination within engineering or technical projects Strong analytical skills with the ability to assess stakeholder needs and translate them into technical requirements Excellent written and verbal communication skills in English, with the ability to engage diverse audiences Proficiency in project management methodologies and familiarity with project lifecycle management Experience with project management software and tools (e.g., Microsoft Project, Jira, Asana, or similar platforms) Demonstrated ability to work collaboratively across technical and non-technical teams Strong organizational and time management skills with the ability to manage multiple stakeholder relationships simultaneously Knowledge of engineering principles and technical project environments Experience in conflict resolution and change management Proficiency in documentation and data analysis tools Familiarity with CRM systems or stakeholder management platforms Project Management Professional (PMP) certification or equivalent project management certification (preferred) Experience working in the UAE or Middle Eastern business environment (preferred) Strong interpersonal skills with the ability to build and maintain professional relationships<br><br><br>Additional Information<br><br>Must have a valid UAE Family Book

Title<br><br>Senior Planning Engineer<br><br>Belong, Connect, Grow, with KBR!<br><br>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.<br><br> Job Title: Senior Planning Engineer – Offshore FEED Project<br><br>The Senior Planning Engineer is responsible for developing, maintaining, monitoring, and reporting project schedules for the ADNOC Offshore CED Project. The role ensures effective planning, progress measurement, forecasting, and scheduling control throughout engineering, procurement, construction, commissioning, and handover phases while ensuring compliance with ADNOC Offshore requirements and project objectives.<br><br>Key Responsibilities<br><br>Project Planning & Scheduling<br><br>Develop and maintain Integrated Master Schedules (IMS) covering Engineering, Procurement, Construction, Commissioning, and Start-up activities. Prepare Level 1, Level 2, Level 3, and detailed execution schedules in Primavera P6. Establish project baselines and monitor schedule performance against approved targets. Develop work breakdown structures (WBS), coding structures, and project calendars. Ensure alignment between contractor, subcontractor, vendor, and client schedules.<br><br>Progress Monitoring & Control<br><br>Monitor project progress and identify schedule variances. Analyze critical path activities and assess schedule impacts. Prepare recovery and acceleration plans to mitigate delays. Conduct trend analysis and forecast project completion dates. Monitor engineering deliverables, procurement status, construction progress, and commissioning readiness.<br><br>Project Controls & Reporting<br><br>Prepare weekly and monthly progress reports for management and ADNOC Offshore. Develop project dashboards, S-curves, manpower histograms, productivity reports, and KPI reports. Support management reviews by providing schedule performance analysis. Generate earned value reports and schedule performance indicators.<br><br>Risk & Change Management<br><br>Perform delay analysis and schedule risk assessments. Evaluate the impact of change orders, scope changes, and unforeseen events. Support preparation of Extension of Time (EOT) claims and supporting documentation. Participate in risk workshops and mitigation planning.<br><br>Coordination & Stakeholder Management<br><br>Interface with engineering, procurement, construction, commissioning, and project management teams. Coordinate with ADNOC Offshore representatives and contractors regarding planning and progress issues. Participate in project review meetings and management presentations. Ensure planning data is accurately reflected across all project disciplines.<br><br>Commissioning & Handover Support<br><br>Develop commissioning and system completion schedules. Monitor Mechanical Completion (MC), Ready for Commissioning (RFC), Ready for Start-Up (RFSU), and Handover milestones. Support development of system turnover plans and commissioning tracking systems.<br><br>Qualifications<br><br>Bachelor's Degree in Engineering, Project Management, or related discipline. Primavera P6 Professional Certification preferred. PMP Certification is an advantage. Membership in a recognized engineering institute is desirable.<br><br>Experience<br><br>Minimum 12-15 years of experience in project planning and scheduling within the Oil & Gas industry. Minimum 8 years in EPC/EPCM projects involving offshore facilities, brownfield modifications, or major capital projects. Previous ADNOC Offshore project experience is highly preferred. Strong experience in engineering, procurement, construction, commissioning, and project controls. Experience supporting mega-projects within the UAE and Middle East region preferred<br>R2129545

Company Description Cruq AI is an AI-native agent platform that delivers powerful automation to transform operations for enterprises and scale-ups. The platform provides a modular library of pre-built AI agents across domains such as data entry, customer service, compliance, finance, HR, healthcare, IT, legal, and retail, enabling end-to-end workflow automation. Its Agent OS supports multi-agent collaboration, flexible deployment, and integration with existing enterprise systems, delivering human-level accuracy and continuous operation. Cruq AI offers rapid deployment templates, customizable solutions, and advanced data capabilities like database integration, memory, and retrieval-augmented generation. With proven cost reductions and continuous self-improvement of agents, Cruq AI helps organizations accelerate processes, improve accuracy, and maintain a competitive edge through intelligent automation.<br>Role Description As a Research Engineer Robotics (Systems) at Cruq AI, you will design, implement, and evaluate robotic systems that leverage advanced AI agents for real-world automation. You will conduct applied research on algorithms and system architectures, develop prototypes, integrate hardware and software components, and validate performance through simulations and experiments. Day-to-day activities include collaborating with cross-functional teams, writing clean and testable code, analyzing experimental results, and iterating on system designs for robustness, safety, and scalability. You will document your work, contribute to technical publications, and support the transition from research prototypes to production-ready solutions. This is a full-time, remote role.<br>Qualifications Strong foundation in Computer Science, including data structures, algorithms, and software engineering principles. Experience in Research and Development (R&D) and applied Research for robotics, autonomous systems, or AI-driven control. Background in Physics or related fields, with understanding of dynamics, kinematics, and control systems for robotic platforms. Proficiency in designing and analyzing Algorithms for perception, planning, control, or multi-agent coordination. Hands-on experience with robotics frameworks (e.g., ROS), simulation tools (e.g., Gazebo, Isaac, Webots), and real or simulated robotic systems. Strong programming skills in languages such as Python, C++, or Rust, and familiarity with Linux-based development environments. Ability to design experiments, interpret data, and communicate findings clearly to technical and non-technical stakeholders. Bachelor’s, Master’s, or PhD in Computer Science, Robotics, Electrical Engineering, Mechanical Engineering, Physics, or a related discipline. Experience with machine learning or reinforcement learning for robotics, and knowledge of systems engineering or distributed systems, is highly beneficial. Comfort working in a remote, collaborative environment, with strong problem-solving skills and a focus on

<ul><li><p>MEP Engineering</p><ul><li><p>Coordinate and supervise MEP installation activities across project sites.</p></li><li><p>Review MEP drawings, shop drawings, specifications, BOQs, and method statements.</p></li><li><p>Coordinate HVAC, electrical, plumbing, firefighting, drainage, and other MEP works as applicable.</p></li><li><p>Coordinate MEP interfaces with civil, structural, architectural, and specialist works.</p></li><li><p>Monitor site progress and ensure works are executed as per approved designs and schedules.</p></li><li><p>Review material submittals and ensure approved materials are used.</p></li><li><p>Coordinate inspections, testing, commissioning, snagging, and handover activities.</p></li><li><p>Resolve technical issues and coordinate with consultants, contractors, and project teams.</p></li></ul><p>QA/QC – Civil</p><ul><li><p>Implement project Quality Plans, ITPs, procedures, and inspection requirements.</p></li><li><p>Inspect civil works including excavation, reinforcement, formwork, concrete, masonry, waterproofing, structural works, and finishing.</p></li><li><p>Review drawings, specifications, method statements, material submittals, and inspection checklists.</p></li><li><p>Conduct inspections and coordinate approvals with consultants and clients.</p></li><li><p>Ensure construction activities comply with approved drawings, specifications, and applicable standards.</p></li><li><p>Raise and monitor NCRs, observations, and corrective actions.</p></li><li><p>Verify material quality, test certificates, laboratory reports, and calibration records.</p></li><li><p>Maintain quality records, inspection reports, test results, and handover documentation.</p></li></ul><p>Project Coordination</p><ul><li><p>Coordinate with project managers, construction teams, consultants, subcontractors, suppliers, and other disciplines.</p></li><li><p>Monitor project progress and identify technical or quality issues.</p></li><li><p>Provide technical guidance to engineers, supervisors, and site teams.</p></li><li><p>Participate in coordination meetings and follow up on action items.</p></li><li><p>Support project handover, snag clearance, and closeout activities.</p></li></ul><p>HSE & Compliance</p><ul><li><p>Ensure compliance with company, project, client, and UAE HSE requirements.</p></li><li><p>Ensure safe execution of MEP and civil activities.</p></li><li><p>Participate in site inspections and identify potential safety risks.</p></li><li><p>Ensure corrective actions are implemented for HSE and quality observations.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Qualifications</p><ul><li><p>Bachelor’s Degree in <strong>Mechanical, Electrical, Civil, MEP Engineering, or related discipline</strong>.</p></li><li><p>Relevant QA/QC certifications such as <strong>ISO 9001, CSWIP, or equivalent</strong> will be an advantage.</p></li></ul><p>Experience</p><ul><li><p>Typically <strong>7–12 years of relevant experience</strong> in MEP engineering, civil QA/QC, construction, or infrastructure projects.</p></li><li><p>Strong experience in large-scale construction, EPC, MEP, or infrastructure projects.</p></li><li><p>UAE/GCC experience is preferred.</p></li><li><p>Experience working with consultants, contractors, and major clients is an advantage.</p></li></ul><p>Technical Skills</p><ul><li><p>MEP Engineering & Coordination</p></li><li><p>Civil QA/QC & Inspection</p></li><li><p>Technical Drawing Review</p></li><li><p>ITPs, Method Statements & Checklists</p></li><li><p>Material Inspection & Approval</p></li><li><p>NCR & Corrective Action Management</p></li><li><p>Testing & Commissioning</p></li><li><p>Quality Documentation</p></li><li><p>MS Office and relevant engineering software</p></li><li><p>Knowledge of UAE/international construction standards</p></li></ul><p>Key Competencies</p><ul><li><p>Technical Expertise</p></li><li><p>Quality Focus</p></li><li><p>Project Coordination</p></li><li><p>Problem Solving</p></li><li><p>Attention to Detail</p></li><li><p>Teamwork & Leadership</p></li><li><p>Communication Skills</p></li><li><p>Planning & Organization</p></li><li><p>Stakeholder Management</p></li></ul></li></ul><br><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Wood is currently recruiting for </span><span>Specialist Engineer QA/QC </span><span>under ADNOC Offshore US LTPD project.</span></p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Job Objectives</strong></p><br> <ul> <li>Ensure the effective implementation and maintenance of quality assurance and quality control systems across projects and operations.</li> <li>Monitor compliance with project specifications, company standards, regulatory requirements, and industry best practices.</li> <li>Support the delivery of projects by promoting quality excellence, continuous improvement, and adherence to established quality management procedures.</li> <li>Identify quality risks, implement corrective and preventive actions, and ensure compliance throughout the project lifecycle.</li> <li>Coordinate with project teams, contractors, suppliers, and stakeholders to achieve quality objectives and customer satisfaction.</li> </ul> <p><strong>Key Responsibilities</strong></p><br> <ul> <li>Implement and monitor QA/QC processes, procedures, and quality management systems.</li> <li>Review and ensure compliance with project specifications, quality plans, inspection and test plans (ITPs), and applicable standards.</li> <li>Conduct quality audits, inspections, and surveillance activities to verify compliance with quality requirements.</li> <li>Monitor and track non-conformance reports (NCRs), corrective actions, and preventive actions.</li> <li>Review quality-related documents, technical submittals, inspection reports, and material certifications.</li> <li>Coordinate with project teams, contractors, and vendors to resolve quality issues and improve performance.</li> <li>Prepare quality reports, KPI dashboards, and management summaries.</li> <li>Support internal and external audits, client inspections, and regulatory reviews.</li> <li>Promote quality awareness, continuous improvement, and lessons learned initiatives.</li> <li>Ensure compliance with company quality standards, ISO requirements, and project quality objectives.</li> </ul> <br><br><br>Qualifications:<br><p><strong>Qualifications</strong></p><br> <ul> <li>Excellent written and verbal communication skills&nbsp;</li> </ul><br> <ul> <li>Excellent technical team and interpersonal skills&nbsp;</li> </ul><br> <ul> <li>Experience and detailed knowledge of relevant international codes and standards&nbsp;</li> </ul><br> <ul> <li>Knowledge of engineering computer programs and general business software&nbsp;</li> <li>Bachelor's Degree in Engineering, Quality Management, Industrial Engineering, Mechanical Engineering, Civil Engineering, Electrical Engineering, or a related discipline.</li> <li>Master's Degree in a relevant field is an advantage.</li> </ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Fuse Energy is a forward-thinking renewable energy startup on a mission to deliver a terawatt of renewable energy - fast.<br> We're combining first-principles thinking with cutting-edge technology to build a radically better energy system.<br> We raised $210M from top-tier investors including Multicoin, Balderton, Lakestar, Accel, Creandum, Lowercarbon, Ribbit, Box Group and strategic angels like Nico Rosberg, the Co-Founder of Solana and GPs behind Meta, Revolut, Spotify, Uber and more.<br> As data centres become one of the largest and fastest-growing sources of electricity demand, Fuse is expanding into high-performance compute infrastructure that sits at the intersection of energy and AI.<br> We're building the GPU/CUDA performance layer and the inference serving layer at the same time, from scratch - and we're looking for the founding engineer to own the latter.<br> We're looking for a Founding AI Inference Engineer to define and build how Fuse serves AI inference workloads at scale, reporting directly to the CTO.<br> Where our CUDA and GPU engineering hires own kernel-level and hardware performance, this role owns the layer above it: how models actually get served, scaled, and delivered against committed performance targets.<br> The Opportunity Fuse is seeing significant demand for data centre capacity across the markets we operate in, primarily for inference.<br> Few companies in the world can pair real power delivery with real compute the way Fuse can, which puts inference serving at the heart of how we turn that advantage into the best offering in the market.<br> That's this role.<br> Responsibilities Define Fuse's inference serving strategy and architecture from first principles.<br> Design and build the serving stack: request routing, batching, scheduling, and autoscaling for high-throughput, latency-sensitive inference workloads.<br> Own model-level optimisation strategy for serving - deciding where and how to apply quantisation, distillation, speculative decoding, and similar techniques to improve throughput and cost per token, partnering with the CUDA/GPU engineers.<br> Make the core software architecture calls on serving frameworks and orchestration (e.<br>g. vLLM, TensorRT-LLM, SGLang, Triton Inference Server, or equivalents).<br> Translate throughput, latency, and uptime commitments into concrete technical specifications and serving capacity plans.<br> Act as a direct technical owner of inference performance and reliability.<br> Work closely with the CUDA and GPU engineering teams to ensure custom kernels and hardware performance work are integrated cleanly into the serving layer.<br> Set the standards, tooling, and benchmarks this function will run on as it grows.<br> Competitive salary and an equity sign-on bonus.<br> Biannual bonus scheme.<br> Fully expensed tech to match your needs.<br> Breakfast and dinner allowance for office based employees.<br> 4+ years of experience building or operating large-scale inference serving systems, or equivalent strong project/industry experience.<br> Deep, hands-on experience with inference serving frameworks and the techniques used to optimise them (batching, KV-cache management, quantisation, speculative decoding).<br> Strong systems thinking - able to reason about the full path from incoming request to served response across a large cluster.<br> Comfortable working directly with GPU/CUDA engineers to integrate low-level performance work into a serving system.<br> A track record of making high-stakes architecture calls and owning the outcome.<br> Comfort operating without a playbook - this is a founding role shaping a new function around architecture that's still early-stage, not joining an established one.<br> Nice to Have Experience with Triton or custom ML inference/training frameworks.<br> Experience with autoscaling or capacity planning for large-scale inference workloads.<br> Exposure to multi-tenant serving or SLA-driven infrastructure.<br> Background at a hyperscaler, frontier AI lab, or large-scale distributed inference system.<br> Familiarity with Kubernetes/Slurm for cluster orchestration.<br> Interest or experience in energy markets, grid systems, or sustainability-focused compute.<br></span> </div>

<p>We are seeking a skilled and detail-oriented Project Engineer specializing in bridge structures with ADM approval to join our dynamic team in Abu Dhabi. The successful candidate will play a critical role in managing bridge construction projects, ensuring quality, safety, and timely delivery while coordinating with multiple stakeholders within the railway construction sector. Responsibilities: - Oversee the engineering and technical aspects of bridge construction projects, ensuring compliance with ADM standards and regulations. - Coordinate with design teams, contractors, and clients to ensure project specifications and timelines are met. - Conduct site inspections and quality assurance checks to maintain high standards of construction and safety. - Prepare and review engineering drawings, reports, and documentation related to bridge structures. - Manage project schedules, resources, and budgets to optimize efficiency and performance. - Collaborate with procurement and logistics teams to ensure timely acquisition and delivery of materials and equipment. - Identify and resolve technical issues during the construction phase promptly. - Ensure adherence to health, safety, and environmental policies on site.</p><p>- Bachelor’s degree in Civil Engineering or related field with a focus on bridge structures. - Professional experience in bridge construction projects within railway or infrastructure sectors, preferably in the UAE. - ADM approval certification is mandatory. - Strong knowledge of bridge design, construction methods, and engineering principles. - Excellent project management and organizational skills with the ability to manage multiple tasks simultaneously. - Proficient in engineering software and tools relevant to bridge engineering. - Effective communication and interpersonal skills to work collaboratively with multidisciplinary teams. - Ability to work under pressure and meet tight deadlines while maintaining quality standards. - Proactive problem-solving skills and attention to detail.</p>

<p>We are seeking a skilled and detail-oriented Project Engineer specializing in bridge structures with ADM approval to join our dynamic team in Abu Dhabi. The successful candidate will play a critical role in managing bridge construction projects, ensuring quality, safety, and timely delivery while coordinating with multiple stakeholders within the railway construction sector. Responsibilities: - Oversee the engineering and technical aspects of bridge construction projects, ensuring compliance with ADM standards and regulations. - Coordinate with design teams, contractors, and clients to ensure project specifications and timelines are met. - Conduct site inspections and quality assurance checks to maintain high standards of construction and safety. - Prepare and review engineering drawings, reports, and documentation related to bridge structures. - Manage project schedules, resources, and budgets to optimize efficiency and performance. - Collaborate with procurement and logistics teams to ensure timely acquisition and delivery of materials and equipment. - Identify and resolve technical issues during the construction phase promptly. - Ensure adherence to health, safety, and environmental policies on site.</p><p>- Bachelor’s degree in Civil Engineering or related field with a focus on bridge structures. - Professional experience in bridge construction projects within railway or infrastructure sectors, preferably in the UAE. - ADM approval certification is mandatory. - Strong knowledge of bridge design, construction methods, and engineering principles. - Excellent project management and organizational skills with the ability to manage multiple tasks simultaneously. - Proficient in engineering software and tools relevant to bridge engineering. - Effective communication and interpersonal skills to work collaboratively with multidisciplinary teams. - Ability to work under pressure and meet tight deadlines while maintaining quality standards. - Proactive problem-solving skills and attention to detail.</p>