Heavy equipment mechanical engineer Jobs

<ol><li><p><strong>Develop and implement equipment preservation programs</strong> in accordance with project specifications, vendor recommendations, and company procedures to maintain asset integrity throughout the project lifecycle.</p></li><li><p><strong>Coordinate preservation activities</strong> with Construction, Warehouse, QA/QC, Vendors, and Commissioning teams to ensure all equipment and systems receive the required preservation treatment and maintenance.</p></li><li><p><strong>Monitor and maintain preservation records</strong>, including preservation registers, inspection reports, maintenance logs, and status reports, ensuring full traceability and audit readiness.</p></li><li><p><strong>Conduct routine field inspections and audits</strong> to verify preservation compliance for rotating equipment, static equipment, electrical systems, instruments, valves, and packaged units, initiating corrective actions where required.</p></li><li><p><strong>Support mechanical completion and system handover activities</strong> by ensuring preservation requirements are maintained until acceptance by the commissioning and operations teams and that all preservation dossiers are complete.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>10+ yrs experience working as a preservation engineer in Oil&Gas ECP organizations. </p>

<p>• Develop detailed electrical design for high-voltage systems (11kV, 33kV, 132kV, and above) including single-line diagrams, cable schedules, control schematics, and layout drawings. • Perform load calculations, equipment sizing, cable sizing, and voltage drop analysis. • Prepare technical specifications and datasheets for HV equipment such as transformers, switchgears, circuit breakers, CTs, VTs, relays, and protection panels. • Design and review protection and control systems, including relay coordination and protection philosophy. • Interface with civil, mechanical, and instrumentation disciplines for interdisciplinary coordination. • Ensure compliance with IEC, IEEE, DEWA, SEC, or client-specific standards and codes. • Support in procurement activities by evaluating vendor offers, reviewing technical submissions, and performing FATs (Factory Acceptance Tests). • Prepare and review engineering documents, such as method statements, calculation notes, and test procedures. • Knowledge of simulation tools such as PVsyst, ETAP, and Dialux/ Equivalent software. • Familiar with International codes such as AS / NZS, IEC / EN, IEEE, BS, NFC and • Sizing/selection of PV module, SCB, Transformer, Inverter, HV/MV/LV switchgear/CRP Panel, Cable, Bus Bar/Duct, DG, UPS, Battery/Battery charger etc. • Participate in client and consultant meetings, and provide clarification on technical issues. </p><p>• Bachelor’s Degree in Electrical Engineering (Master’s is a plus). • Minimum 5–10 years of experience in HV electrical design within an EPC environment. • Strong knowledge of HV electrical systems, equipment, and industry practices. • Proficient in design tools such as ETAP, AutoCAD, DigSILENT, or similar software. • Familiarity with international codes and standards (IEC, IEEE, NEC, etc.). • Excellent written and verbal communication skills. • Ability to work in a fast-paced, team-oriented environment. </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</strong></p><br><p><em>We have an outstanding record in completing major Energy, Marine, Infrastructure and Defense &amp; Security projects around the globe and we pride ourselves on delivering over the years the kind of reliability and trust that the client has the right to expect from a major EPC contractor.</em></p><br><br>Job Description<br><p>We are constantly growing and are currently looking for <strong>Mechanical QC Inspector (Rotating/Static Equipments)&nbsp;</strong>to join a top qualified and knowledgeable Quality team of our Oil, Gas and Chemicals Division.</p><br><p>Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.</p><br><p>Join our worldwide journey. Build on something that matters!</p><br><p><strong>What you will need to do:</strong></p><br><ul><li>Report directly to the assigned Mechanical QC Engineer and support the implementation of quality control procedures for mechanical (Rotating/Static Equipments) works.</li><li>Review project technical specifications, drawings, and BOQ to identify quality requirements, engineering criteria, and inspection requirements related to mechanical works.</li><li>Participate in site receiving inspections of mechanical materials and equipment to verify compliance with project specifications and approved documentation.</li><li>Perform fit-up inspections and final dimensional verification prior to installation and welding activities.</li><li>Prepare, file, maintain, and retrieve inspection reports, test records, and quality documentation generated from inspection activities.</li><li>Attend and support client inspections and testing activities within the assigned area of responsibility.</li><li>Prepare punch lists for completed mechanical works and follow up until all items are satisfactorily closed.</li><li>Assist construction personnel in identifying quality issues, potential problems, and non-conformances related to mechanical works.</li><li>Report and escalate non-conforming work to the Mechanical QC Engineer and/or QC Manager for further action.</li><li>Ensure that all measuring and testing instruments used for inspection activities are properly calibrated and functional.</li></ul><p>Perform additional related duties as assigned by the QC Engineer or QC Manager.</p><br><p><strong>What you will need to have:</strong></p><br><ul><li>Bachelor Degree/ Diploma in Mechanical Engineering</li><li>Minimum 5 years’ experience as <strong>QC Rotating/ Static Equipment Inspector</strong> in oil and gas projects</li><li>Hands- on experience in Inspection of piping, static equipment, rotating equipment, valves and associated mechanical systems.</li></ul><p><strong>You are someone who:</strong></p><br><ul><li>Organized, committed and hard worker</li><li>Strong interpersonal skills and a team player with high attention to details</li><li>An analytical thinker</li><li>A result driven person combined with problem solving techniques</li><li>Report writing and communication skills&nbsp;</li></ul><p><strong>What is in it for you:&nbsp;</strong></p><br><p>Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create&nbsp;mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come.&nbsp;At Archirodon, you will find a proud,&nbsp;productive and human-centric culture, caring for and building on our people and their development!</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring&nbsp;our&nbsp;</em><em>open vacancies</em><em>&nbsp;and our&nbsp;</em><em>LinkedIn</em><em>&nbsp;page!&nbsp; Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</em></p><br><p><em>Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br>Additional Information<br><p>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><br><br><br> </div>

<ul><li>Safely operate heavy vehicles, ensuring adherence to traffic laws and regulations while transporting goods over long distances.</li><li>Conduct pre-trip inspections of vehicles to identify any maintenance issues, ensuring safety and roadworthiness before each journey.</li><li>Maintain accurate logs of driving hours, deliveries, and vehicle maintenance, facilitating compliance with industry regulations.</li><li>Load and unload cargo, securing it properly to prevent damage during transit, showcasing attention to detail and care for goods.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent, providing a foundational education for effective communication and problem-solving skills.</li><li>Valid commercial driver’s license (CDL) with endorsements as required, demonstrating the necessary qualifications to operate heavy vehicles.</li><li>Minimum of 3 years of experience in heavy truck driving, showcasing a solid track record of reliability and professionalism.</li><li>Familiarity with DOT regulations and safety standards, ensuring compliance and reducing legal risks during operations.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a Mechanical Engineer with specific expertise in sphere tanks (spherical storage tanks) to support site execution and installation activities on our EPC projects in the UAE.</p><ul><li><b>Sphere Tank Execution:</b> Oversee site fabrication, assembly, erection, and installation of spherical storage tanks.</li><li><b>Quality &amp; Code Compliance:</b> Ensure all tank welding, fit-up, non-destructive testing (NDT), and hydrostatic testing meet project specs and international standards (e.g., ASME / API).</li><li><b>Site Supervision:</b> Manage subcontractors and site teams to keep erection activities on schedule and within safety guidelines.</li><li><b>Technical Issue Resolution:</b> Address site engineering queries, inspect fit-ups, and review drawings and method statements for sphere tank works.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li><b>Direct Experience:</b> Hands-on experience as a Mechanical Engineer working specifically on <b>Sphere Tanks / Spherical Storage Vessels</b>.</li><li><b>Industry:</b> Background in <b>EPC / Oil &amp; Gas / Heavy Industrial</b> construction projects.</li><li><b>Location:</b> Based in the UAE or available for local hiring.</li></ul><p><br></p></div>

Company Description Purity Water & Environment Equipment L. L. C. provides comprehensive water and wastewater treatment solutions for a wide range of industrial and commercial clients. The company supplies water treatment equipment and chemicals, delivers operational and maintenance services, and offers water testing through an EIAC-accredited laboratory. It also specializes in engineering, manufacturing, assembly, and fabrication to ensure high standards of quality and efficiency in every project. Through continuous investment in research and development, Purity Water & Environment Equipment integrates advanced technologies into its purification and treatment systems, maintaining a strong position at the forefront of industry innovation.<br>Role Description The Water Treatment Service Engineer is a full-time, on-site role based in Dubai, United Arab Emirates. The role involves installing, commissioning, and servicing water and wastewater treatment equipment at customer sites, ensuring systems operate safely, efficiently, and in line with technical specifications. Day-to-day tasks include diagnosing equipment issues, performing preventive and corrective maintenance, and providing technical support to clients and internal teams. The engineer will prepare service reports, maintain accurate records of work performed, and coordinate with the operations and laboratory teams to support water quality testing and compliance. The role also includes communicating with customers to explain findings, recommend improvements, and support long-term system reliability.<br>Qualifications<br> <br>Candidates should possess strong Troubleshooting skills for identifying and resolving mechanical, electrical, and process-related issues in water treatment systems. Candidates should possess Field Service experience, including on-site installation, commissioning, and customer support for industrial or environmental equipment. Candidates should possess clear and professional Communication skills to interact with clients, colleagues, and vendors, and to document service activities. Candidates should possess Technical Support capabilities to guide users, interpret technical documentation, and collaborate with engineering and laboratory teams. Candidates should possess Maintenance & Repair skills for performing routine servicing, repairs, and performance optimization of treatment systems and related components. Relevant qualifications such as a diploma or degree in Mechanical, Chemical, Environmental, or Electrical Engineering (or related field) are preferred. Knowledge of water and wastewater treatment processes, pumps, filtration systems, and chemical dosing equipment is highly beneficial. Ability to work safely on industrial sites, follow HSE procedures, and manage time effectively in a field-based role. Previous experience in the Gulf region or similar environments and a valid driver’s license are advantageous.

At Julphar, we are on a journey of culture transformation & our mission is to provide a better quality of life for the entire family by delivering best in class solutions and real value with compassion and professionalism.<br><br>Our core values: Respect, Collaboration, innovation, Integrity and Compassion - Combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to make a positive impact on the lives of the patients we serve, enable Talents , create a healthy work environment, and accomplish our goals through world-class research and with the compassion and commitment of our employees.<br><br>Job Summary<br><br>The Equipment Maintenance Engineer will be a key member of the engineering team, responsible for performing preventive maintenance, troubleshooting equipment breakdowns, and ensuring optimal performance of sterile plant machinery. This role involves interpreting technical data, providing cost and time estimates, testing systems, and evaluating equipment, components, and systems to meet business requirements. The ideal candidate is passionate about technology, excels in problem-solving, can prioritize tasks effectively, and delivers work within strict deadlines.<br><br>Key Responsibilities<br><br>Adhere to and maintain c GMP principles while providing engineering support and maintenance activities. Ensure repair and maintenance activities align with company policies, goals, and equipment performance requirements. Monitor and enforce all safety protocols within the Engineering Section. Manage maintenance for sterile production and packaging equipment, including but not limited to:Freeze Dryer Ampoules & Vials Washing Machines Dry Hot Air Sterilizing Tunnel Ampoule & Vial Filling and Sealing Machines Continuous Motion Vial Closing Machines Labelling Machines Ultrasonic Cleaning Machines Washing Machines for Change Parts Steam Sterilizing Autoclaves Semi-Automatic and Fully Automatic Inspection/Closing Machines Cartoners Perform planned preventive maintenance to minimize downtime and maximize equipment efficiency. Overhaul and upgrade aging equipment when necessary. Ensure compliance with GAMP and c GMP standards. Maintain equipment as per manufacturer’s instructions and support recommendations. Inspect and implement corrective actions during equipment breakdowns. Generate work completion reports, logbooks, and daily activity reports. Track notifications and job orders through SAP, coordinating with the SAP Coordinator for timely completion. Provide technical support and training on new equipment, ensuring staff are adequately trained. Assist other departments by defining equipment specifications and providing engineering solutions. Monitor spare parts inventory, ensuring timely procurement when minimum levels are reached.<br>Qualification<br><br>B. Sc. in Mechatronics Engineering or Electronics Engineering with strong knowledge of Mechanical Engineering.<br><br>Experience<br><br>5–10 years of experience in pharmaceutical or food industries, with hands-on knowledge of sterile equipment and electronics.<br><br>Requirements & Skills<br><br>In-depth knowledge of all types of sterile equipment, including operations and components. Strong understanding of pharma machinery installation, preventive and corrective maintenance. Expertise in mechanical, electronics, pneumatic, and hydraulic systems. Ability to combine mechanical and electronics engineering expertise effectively. Strong knowledge of GED (Good Engineering Documents) and maintenance documentation. Competence in preventive/corrective maintenance planning and implementation. Experience in critical spare parts management and inventory control. Proficiency in English (written and spoken) and MS Office (Excel, Word, etc.). Positive attitude, strong analytical skills, and ability to encourage and motivate team members. Familiarity with SAP and EQMS systems.<br><br>We value people from different backgrounds. Could this be your story? Apply today or visit www. Julphar.net to read more about us and the journey of Julphar

<ul><li><p>Carry out preventive and corrective maintenance</p></li><li><p>Troubleshoot electrical, mechanical, plumbing, and HVAC issues</p></li><li><p>Inspect equipment and identify maintenance requirements</p></li><li><p>Ensure all maintenance work is completed safely and efficiently</p></li><li><p>Respond to breakdowns and emergency maintenance requests</p></li><li><p>Maintain proper records of maintenance activities</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Relevant technical qualification/certification</p></li><li><p>Previous experience in general building/facility maintenance</p></li><li><p>Strong troubleshooting and problem-solving skills</p></li><li><p>Ability to work independently and as part of a team</p><br></li></ul>

Role: Mechanical Engineer - Automotive (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $55 - $100/hour<br>Role Overview:We are hiring for one of our clients, seeking a Mechanical Engineer to work on a contract basis. The role involves designing and optimizing mechanical components for next-generation systems. You will collaborate with cross-functional teams to ensure product performance and reliability.<br>Key Responsibilities:• Design mechanical components and assemblies using CAD software.• Perform finite element analysis (FEA) and computational fluid dynamics (CFD) simulations.• Develop and test prototypes to validate design performance.• Prepare technical documentation, including drawings and specifications.• Troubleshoot mechanical issues and propose solutions to improve product functionality.<br>Required Skills & Qualifications:• Proficiency in CAD software such as Solid Works or Auto CAD is required.• Experience with FEA and CFD simulation tools is necessary.• Knowledge of mechanical design principles and manufacturing processes is required.• Ability to read and interpret engineering drawings and technical specifications is necessary.• Strong problem-solving skills and attention to detail are required.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Technology, Information and Internet industry, contributing to the development of cutting-edge mechanical systems. The contract duration is project-based with potential for extension.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Commissioning Engineer - Abu Dhabi, UAEAre you a hands-on professional with a passion for precision and performance? Join us in delivering high-quality MEP systems for landmark projects in the UAE.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEC Data Centre Solutions delivers the infrastructure behind the digital world. We construct and upgrade mission-critical environments for top-tier clients - always prioritising performance, speed, and precision.<br>Why Join Us? In the role of Commissioning Engineer, you’ll help power the future of digital infrastructure.<br>ALEC Data Centre Solutions combines speed, security, and scalability with technical precision - and you’ll be part of a team delivering mission-critical environments trusted by global tech leaders.<br>At ALEC, we’re about more than just building iconic structures - we’re about building exceptional careers. As a trusted partner to some of the region’s most ambitious projects, we value innovation, operational excellence, and our people. Join us to deliver Project Planning and Controls initiatives that directly shape our business success, from sourcing candidates to enhancing candidate experiences.<br>About Your Team Reporting to the Commissioning Manager, you’ll lead a team of Commissioning Foremen and collaborate with design engineers, QA/QC teams, and OEM representatives to achieve project success.<br>Your Role As a Commissioning Engineer, you will be responsible for:Preparing commissioning strategies, planning, and testing scripts aligned with project specifications and codes. Conducting inspections, pre-functional checks, and functional performance tests for mechanical, electrical, BMS, and specialist systems. Troubleshooting and resolving technical issues in collaboration with design and OEM teams. Coordinating equipment delivery, installation, and start-up to meet project schedules. Compiling and submitting commissioning documentation, including test reports and punch lists, for client and consultant review. Mentoring junior engineers and technicians, promoting best practices and technical excellence.<br>This is a full-time role requiring attention to detail, coordination, and a proactive approach to commissioning activities.<br>What We’re Looking For<br>Experience5+ years of experience in MEP commissioning and testing processes. Proven expertise in functional performance testing and troubleshooting.<br>Knowledge Working knowledge of MEP systems, commissioning methods, and regional codes. Ability to read technical drawings and develop test procedures.<br>Skills Proficiency in MS Office Suite and project management tools (Primavera/MS Project preferred). Strong problem-solving, communication, and leadership skills. Excellent written and verbal communication skills.<br>Qualifications Degree in Mechanical, Electrical, or related engineering disciplines.<br>What We Offer The chance to contribute to some of UAE most iconic projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression.<br>Ready to plan the path to project success? If you’re inspired by what you’ve read and believe you’re the right fit, we’d love to hear from you. Join ALEC Data Centre Solutions and play a pivotal role in shaping a high-performing team that drives our success.<br>Apply today and be part of something excellent! Please apply as soon as possible, as this advert may close once we have identified the right candidate. Although we may not be able to respond to every application, we appreciate your interest in building a future with us.

<p>We are seeking a skilled Mechanical Engineer to join our dynamic construction team in Dubai. The ideal candidate will play a key role in designing, developing, and overseeing mechanical systems to ensure the successful completion of our construction projects. This position offers the opportunity to work in a fast-paced environment where innovation and precision are highly valued. Responsibilities: - Design, develop, and supervise mechanical systems and components for construction projects. - Collaborate with architects, civil engineers, and other stakeholders to ensure integrated and efficient project completion. - Conduct site inspections and surveys to monitor mechanical installations and ensure compliance with safety and quality standards. - Prepare technical drawings, specifications, and project reports. - Perform calculations and simulations to validate system designs and performance. - Identify and resolve mechanical issues promptly to avoid delays and cost overruns. - Stay updated on industry best practices, materials, and technologies relevant to mechanical engineering in construction.</p><p>- Bachelor's degree in Mechanical Engineering or related field. - Proven experience in mechanical engineering within the construction industry. - Strong understanding of mechanical systems, HVAC, plumbing, and fire protection. - Proficiency in computer-aided design (CAD) software and other engineering tools. - Excellent problem-solving and analytical skills. - Ability to work collaboratively within multidisciplinary teams. - Strong communication and interpersonal skills. - Familiarity with local building codes, regulations, and safety standards. - Willingness to work on-site in Dubai and manage multiple projects effectively.</p>

<ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>QUALIFICATIONS & SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul>

<ul><li><p>Implement and maintain QA/QC procedures for mechanical works (HVAC, Plumbing, Drainage, Fire Fighting). · Conduct inspections for incoming materials, site installations, testing & commissioning activities. · Prepare and review method statements, ITPs, checklists, and material submittals. · Coordinate with consultants, clients, and subcontractors on quality and inspection matters. · Maintain quality documentation and ensure compliance with project specifications and local authority standards (DCD, Dubai Municipality, DEWA where applicable). · Monitor site work to ensure adherence to approved drawings and standards. · Conduct NCR (Non-Conformance Report) investigations and support corrective/preventive actions. · Prepare final handover QA/QC documentation and testing reports.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in Mechanical Engineering. · 08–10 years of relevant QA/QC experience in MEP contracting (UAE experience preferred). · Strong knowledge of Mechanical Systems (HVAC, Fire Fighting, Plumbing systems). · Familiarity with DCD, DM, DEWA & other authority regulations. · Experience in villa & high-rise building projects is highly preferred. · Strong communication, documentation, and coordination skills. · Ability to work under pressure and meet project timelines. · Candidates who can join immediately, will be given top priority.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Provide technical expertise with experience based knowledge and assistance to technical and operational divisions / departments on all related matters to reliability engineering, assessment and monitoring </p><br><br><br>Job Specific Accountabilities <br><p>•&nbsp;&nbsp; &nbsp;Conducts Root Cause Failure Analysis (RCFA), Asset Performance Management (APM) and Reliability Center Maintenance (RCM) studies in an effort to convert the nature of maintenance from reactive repairs to proactive preventive maintenance and condition monitoring.<br>•&nbsp;&nbsp; &nbsp;Identifies and applies appropriate maintenance strategies to minimize the impact of failures on business performance.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Leads and participates in BF/GF (Brown Field/Green Field) Engineering activities to improve Reliability of and optimize maintenance costs.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Focuses on identification of equipment issues before they result in failures via use of predictive tools and Reliability methods. &nbsp;<br>•&nbsp;&nbsp; &nbsp;Maintains bad factor listing and reporting. &nbsp;Researches and provides technical advice for upgrading and refurbishment of mechanical equipment during major overhauls or new installations.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Reviews packages for new projects and recommends on equipment selection and redundancy and participates in equipment review and proposed new solutions alerts on obsolescence of equipment.<br>•&nbsp;&nbsp; &nbsp;Recommends necessary modification/replacement of equipment to overcome technical problems.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Assists operational sites to develop appropriate monitoring techniques to help reflecting the equipment’s real conditions.<br>•&nbsp;&nbsp; &nbsp;Leads specific scheme/works allocated to Reliability Engineering in different disciplines including mechanical, electrical, instrumentation. &nbsp;<br>&nbsp;</p><br><br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required<br>&nbsp;</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Electrical or Mechanical Engineering or equivalent.</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>6 years of experience,preferably in the oil &amp; gas industry<br>&nbsp;</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

Job Title: MEP Site Engineer Company: Sanya General Contracting and Maintenance LLCLocation: Musaffah, Abu Dhabi, UAEJob Type: Full-time Immediate Hiring!!! Should be able to join immediately. Candidates on visit or cancelled visa is preferred.<br>Company Description: Sanya General Contracting & Maintenance LLC, founded in 2014, is an ISO 9001:2008 certified company based in Musaffah, Abu Dhabi, UAE. Our team is comprised of highly qualified and experienced engineers who established the company to address modern engineering and construction challenges in the region. We pride ourselves on quality and innovation in the contracting sector.<br>Job Summary: We are seeking a highly skilled and motivated MEP Site Engineer to join our team. The ideal candidate will possess a strong background in mechanical, electrical, and plumbing engineering, combined with excellent project management skills. This role involves overseeing and coordinating the installation, maintenance, and repair of all mechanical, electrical, and plumbing systems within various building projects. As an MEP Site Engineer, you will collaborate closely with architects, construction teams, and clients to ensure all systems are designed and implemented to meet project specifications and industry standards. Your expertise will be crucial in optimizing system performance and ensuring sustainable, cost-effective solutions are in place. This position offers a dynamic work environment with opportunities for professional growth and development.<br>Responsibilities:Site Supervision: Oversee and manage MEP installations on-site, ensuring compliance with design specifications and quality standards. Coordination: Collaborate with project managers, architects, and subcontractors to coordinate MEP activities with overall project requirements. Auto CAD Proficiency: Utilize Auto CAD for reviewing and modifying MEP drawings as needed during the construction phase. Quality Assurance: Implement and maintain quality control measures to ensure the proper functioning of MEP systems. Documentation: Maintain accurate and organized project documentation, including drawings, specifications, and work progress reports. Safety Compliance: Enforce and promote safety protocols on-site, ensuring a secure working environment. Problem Solving: Identify and resolve issues related to MEP systems, offering innovative solutions when required. Communication: Effectively communicate with team members, clients, and stakeholders to provide project updates and address concerns.<br>Qualifications:Bachelor's degree (B. Tech) in Mechanical/Electrical Engineering is compulsory. Minimum of 3-5 years of experience as a MEP Site engineer in the MEP fit-out industry in UAE. Experience in both Interior and MEP fit-out projects is preferred. Knowledge in all MEP services.(HVAC,Plumbing,Electrical and Fire Fighting) Proficiency in Auto CAD for MEP applications. Knowledge of Microsoft Office software. Previous experience as an MEP Site Engineer in the UAE is preferred. Valid UAE driving license is compulsory. Fluency in English and Hindi is mandatory. Strong communication and interpersonal skills. Attention to detail and problem-solving abilities. Ability to work independently and collaboratively in a fast-paced environment.

Engineer (Piping/Mechanical)<br>We are looking for a highly skilled Engineer (Piping/Mechanical) to support the engineering, installation, testing, commissioning, and successful delivery of complex Oil & Gas EPC projects. This role offers the opportunity to work on large-scale multidisciplinary projects involving piping systems, mechanical equipment, pipelines, and process facilities across the energy and infrastructure sectors.<br>YOUR ROLEAs Engineer (Piping/Mechanical), will play a key role in the design, analysis, material selection, construction support, testing, and commissioning of piping systems while ensuring compliance with international standards, project specifications, safety requirements, schedules, and budgets.<br>Piping System Design & Engineering Design and develop detailed engineering solutions for piping systems in compliance with ASME, API, ANSI, and project-specific standards. Review and interpret P&IDs, piping layouts, isometrics, and construction drawings. Perform piping stress analysis, flow calculations, and engineering evaluations. Develop technical specifications for pipes, valves, fittings, supports, and associated mechanical components. Ensure piping systems are designed for optimal safety, reliability, and operational efficiency. Material Selection & Procurement Support Select appropriate piping materials based on pressure, temperature, corrosion resistance, and process requirements. Prepare material requisitions, technical evaluations, and procurement documentation. Coordinate with procurement teams and vendors to ensure timely material delivery. Support material inspections and ensure proper storage and handling practices on site. Installation & Construction Support Provide technical guidance during piping fabrication, installation, and construction activities. Review and approve installation methodologies and work procedures. Coordinate with site engineers, contractors, and construction teams to resolve technical issues. Monitor welding, fabrication, material control, and installation activities to ensure compliance with approved standards and specifications. Participate in site inspections and construction progress reviews. Testing & Inspection Supervise hydrostatic, pneumatic, pressure, and leak testing activities. Review test packages and ensure successful execution of all testing requirements. Conduct inspections and assess piping system integrity and compliance. Ensure all identified defects, punch-list items, and non-conformities are rectified promptly. Verify that testing documentation meets client and regulatory requirements. Commissioning & Handover Support and supervise pre-commissioning and commissioning activities. Ensure piping systems are fully operational and compliant with project specifications. Collaborate with commissioning teams to achieve successful system startup. Review and validate as-built drawings, inspection records, and turnover documentation. Ensure smooth project handover to clients and operations teams. Project Coordination & Stakeholder Management Collaborate closely with Project Managers, Construction Managers, Designers, QA/QC personnel, and Procurement teams. Provide technical updates and engineering support throughout project execution. Coordinate multidisciplinary activities to ensure seamless project delivery. Monitor engineering deliverables, schedules, budgets, and project milestones. Health, Safety & Environmental Compliance Ensure all activities are conducted in accordance with HSE regulations and company policies. Participate in risk assessments, hazard identification, and mitigation planning. Promote a strong safety culture throughout engineering and construction phases. Support HSE audits, inspections, and compliance initiatives. Documentation & Reporting Maintain complete engineering and project documentation. Prepare technical reports, calculations, specifications, and progress updates. Track project schedules, resources, and engineering deliverables. Ensure accurate record keeping for regulatory, client, and internal requirements.<br>WHAT WE’RE LOOKING FOR<br>Experience Must have 6-8 years of experience in piping and mechanical engineering within the Oil & Gas EPC industry. Proven experience in piping design, installation, testing, commissioning, and construction support. Experience working on large-scale EPC projects in Oil & Gas, Power, Marine, Industrial Plant, or Infrastructure sectors.<br>Education and Certifications Bachelor's Degree in Mechanical Engineering, Civil Engineering, Petroleum Engineering, or a related discipline. Professional certifications in Piping, Mechanical Engineering, or related fields are advantageous.<br>Skills and Competencies Strong knowledge of international standards including: ASME, API, ANSI, Relevant industry codes and regulations. Proficiency in: Auto CAD, Smart Plant 3D, Other piping design and drafting software Experience with: P&ID reviews, Material selection, Stress analysis, Pipe flow calculations, Pipeline and process piping systems Strong understanding of piping materials including: Carbon Steel, Stainless Steel, HDPE, Other specialty piping materials Strong analytical and problem-solving skills. Excellent technical and engineering judgment. Effective stakeholder management and communication skills. Ability to manage multiple priorities within fast-paced project environments. Strong commitment to quality, safety, and operational excellence.<br>WHAT WE OFFER <br>The chance to contribute to some of UAE’s Oil and Gas EPC Mega projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression. Competitive salary and benefits package.<br>Ready to be part of our team? If you’re inspired by what you’ve read and believe you’re the right fit, we’d love to hear from you.<br>Join us and play a pivotal role in shaping a high-performing team that drives our success.<br>Apply today and be part of something excellent!

Job Description<br><br>Job Overview:<br><br>The Subsea Engineer applies their conceptual knowledge of Subsea and with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Subsea problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Subsea Engineer understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Perform Installation Analysis for SURF projects using industry-standard software Provide specialist skills and knowledge in the areas related to engineering and analysis including design codes related to Subsea engineering including installation engineering Coordinate and engage in daily activities and schedule priorities for Subsea Engineering Tender engineering support with emphasis on document review, preparation of subcontractor documents, CTR preparation, bid evaluation, and vendor selection Support Subsea projects and address various requirements for procurement, design, and installation engineering/analysis Assume responsibility for technical reports, design calculations, engineering analysis, and interface with third parties including subcontractors and verification bodies Required to attend and prepare for project progress meetings and departmental meetings Adhere to the safety and legal objectives of the company Training and mentoring of graduates and junior engineers Support in the development of knowledge in the area of design and analysis related to Subsea Understand client requirements and develop solutions to address them, satisfying necessary codes and specifications Take personal responsibility for design, analysis, and technical documentation Liaise with operational engineer to support project engineering and be available for site visits and offshore trips when necessary Develop basic knowledge of McDermott's business units and interactions including engineering, fabrication, and marine functions Develop advanced skills in the use of standard productivity tools such as Microsoft Word, Excel, and Power Point Understand and apply standards and procedures Capture project lessons learned into McDermott’s Lessons Learned system Participate in internal, customer, or third-party technical audits on engineering deliverables and vendor documents<br><br>Reports to:<br><br>Project: Lead Engineer<br><br>Functional: Supervising Department Manager<br><br>Liaise With: Engineers, Design Supervisors, and Designers of own discipline<br><br>Supervises: Trainee Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor's Degree or Master's Degree in Engineering3-8 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Experience related to design and analysis of subsea equipment including risers, pipeline, subsea structures and umbilical Experience with industry-standard software packages for design and installation analysis (E.g., Orcaflex, Pipelay, Offpipe, Abaqus) Experience with industry-commonly used codes and standards for subsea engineering Good organization and communication skills and ability to prioritize workload to meet project deadlines Working knowledge of English, both oral and written HSE, TQM, and cost-conscious Show flexibility and ensure proper hand-over with regards to:The reassignment to other departments, construction sites, and fabrication yards The replacement of colleagues during illness and holidays The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable The managing/learning of future current working methods and software applications<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Role: Mechanical Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $20 - $40/hour<br>Role Overview:The client seeks an Engineering Expert to provide specialized technical guidance for system architecture decisions, troubleshooting complex issues, and optimizing performance across distributed systems. The role requires deep expertise in multiple engineering domains to support critical infrastructure and product development initiatives.<br>Key Responsibilities:• Design and evaluate scalable system architectures to meet evolving business and technical requirements.• Diagnose and resolve high-priority technical issues in production environments with minimal downtime.• Develop and document engineering best practices, standards, and guidelines for cross-team adoption.• Collaborate with product, engineering, and operations teams to align technical solutions with business objectives.• Mentor junior engineers and conduct code reviews to ensure adherence to quality and security standards.<br>Required Skills & Qualifications:• Experience with distributed systems, microservices, or large-scale backend infrastructure.• Proficiency in at least one programming language such as Python, Java, Go, or Rust.• Strong problem-solving skills with a track record of resolving complex technical challenges.• Familiarity with cloud platforms (e.g., AWS, GCP, Azure) and containerization tools (e.g., Docker, Kubernetes).• Ability to write clear technical documentation and communicate architectural decisions effectively.<br>More About the Opportunity:This role offers the chance to work with a global leader in the Technology, Information and Internet industry, contributing to the scalability and reliability of mission-critical systems. The position provides exposure to cutting-edge technologies and the opportunity to shape technical strategy for high-impact projects.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

<p>A strong opportunity is available for an experienced MEP Supervisor to coordinate mechanical, electrical, and plumbing activities across construction and maintenance projects. The role is ideal for a technically skilled professional who can supervise site teams, monitor work quality, and ensure MEP activities are completed safely and according to project requirements.</p> <p>Job Responsibilities<br /> &#8211; Supervise daily MEP installation, maintenance, and site activities.<br /> &#8211; Coordinate mechanical, electrical, and plumbing works with site teams.<br /> &#8211; Allocate tasks and monitor the performance of technicians and workers.<br /> &#8211; Review drawings, layouts, and technical instructions before execution.<br /> &#8211; Monitor installation progress and ensure work follows project specifications.<br /> &#8211; Coordinate with engineers, contractors, and other site departments.<br /> &#8211; Inspect completed MEP works for quality and proper installation.<br /> &#8211; Monitor materials, tools, and equipment required for MEP activities.<br /> &#8211; Identify technical issues and coordinate corrective actions.<br /> &#8211; Ensure compliance with health, safety, and site regulations.<br /> &#8211; Maintain daily progress reports and work records.<br /> &#8211; Support testing, commissioning, maintenance, and handover activities.</p> <p>Company Benefits<br /> &#8211; Competitive salary package<br /> &#8211; Professional construction environment<br /> &#8211; Technical training and development opportunities<br /> &#8211; Career advancement opportunities<br /> &#8211; Benefits as per company policy</p> <p>To apply, share your CV at:<br /> mehraparam91@gmail.com</p>

<ul><li>Drive heavy trailers for delivery of concrete blocks and building materials across the UAE.</li><li>Transport loads safely between the factory, customer sites and construction projects.</li><li>Coordinate with forklift operators during loading and unloading of block bundles.</li><li>Inspect the trailer and load before departure and ensure materials are properly positioned and secured.</li><li>Use appropriate straps, chains and load-securing equipment where required.</li><li>Follow assigned delivery schedules, routes and dispatch instructions.</li><li>Ensure timely deliveries while complying with UAE road and heavy-vehicle regulations.</li><li>Navigate construction sites, industrial areas and restricted-access delivery locations safely.</li><li>Conduct daily checks of tyres, brakes, lights, fluids, coupling systems and trailer condition.</li><li>Immediately report vehicle faults, accidents, fines, delivery delays or site-access issues.</li><li>Maintain delivery notes, trip sheets and other required transport documentation.</li><li>Obtain customer/site acknowledgement after successful delivery.</li><li>Maintain the vehicle in clean and safe operating condition.</li><li>Follow company HSE procedures and safe-driving requirements at all times.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Previous experience transporting concrete blocks, bricks, cement, precast products, steel or other heavy building materials strongly preferred.</li><li>Proven experience driving tractor-trailers / articulated heavy vehicles.</li><li>Strong knowledge of UAE roads, industrial areas and construction-site delivery procedures.</li><li>Familiarity with routes across Umm Al Quwain, Sharjah, Ajman, Dubai and other Emirates is preferred.</li><li>Good understanding of load securing, weight distribution and trailer safety.</li><li>Ability to safely reverse and manoeuvre trailers in factories, construction sites and confined loading areas.</li><li>Basic understanding of heavy-vehicle inspections and minor fault identification.</li><li>Good driving record with a strong commitment to road safety.</li><li>Ability to communicate effectively with dispatch, customers and site teams.</li><li>Willingness to work flexible hours based on delivery requirements.</li></ul>