Interior Designer Jobs in UAE

<p>Position Overview:</p><p>The Site Engineer is responsible for supervising and executing site engineering tasks, performing quantity surveying duties, preparing technical documentation, conducting inspections, and supporting all construction and investigation activities. The role requires strong technical competency, analytical skills, field supervision, and close coordination with project stakeholders to ensure compliance with approved drawings, specifications, and safety standards.</p><p><strong>General Site Engineering & Coordination</strong></p><ul><li><p>Prepare daily, weekly, and monthly site progress reports.</p></li><li><p>Coordinate with the main office for preparation and issuance of shop drawings aligned with site conditions.</p></li><li><p>Supervise and guide Site Foremen based on instructions from the Project Engineer.</p></li><li><p>Communicate daily work activities, priorities, and tasks to the site team.</p></li><li><p>Ensure all activities adhere to approved drawings, method statements, and project specifications.</p></li><li><p>Implement QA/QC procedures and ensure adherence to HSE regulations.</p></li><li><p>Monitor site progress, identify potential delays, and report resource requirements.</p></li><li><p>Track productivity and prepare daily production logs in coordination with the Foreman and Supervisor.</p></li><li><p>Maintain comprehensive document control for all drawings, reports, and site files.</p></li><li><p>Manage and reconcile site petty cash with proper documentation and compliance with company policies.</p></li><li><p>Responsible for correcting daily logs and assigning labor on AMS in accordance with the Project Engineer’s instructions</p></li></ul><p><strong>A.</strong> <strong>Quantity Surveying & Technical Documentation</strong></p><ul><li><p>Prepare BOQs, quantity take-offs, material estimates, and site measurements.</p></li><li><p>Prepare provisional sum submissions as required by project specifications.</p></li><li><p>Prepare steel orders, concrete orders, bar bending schedules (BBS), and steel shop drawings.</p></li><li><p>Develop technical submittals, laboratory test reports, and supporting documentation.</p></li><li><p>Maintain updated as-built drawings throughout construction progress.</p></li><li><p>Prepare IRs, MEP clearance requests, and maintain accurate logs for all submittals.</p></li><li><p>Prepare project close-out documents including permit drawings, approved IRs, lab test results, work permits, final PA reports, TOC, and completion certificates.</p></li></ul><p><strong>B. Inspection, Testing & Quality Control</strong></p><ul><li><p>Prepare and submit Inspection Requests (IRs) and follow up with consultants/clients for approval.</p></li><li><p>Conduct joint surveys with client representatives for new work areas.</p></li><li><p>Verify site readiness for inspections in coordination with the Project Engineer.</p></li><li><p>Prepare internal snag lists and monitor rectification works with the Foreman.</p></li><li><p>Maintain laboratory test logs and follow up for draft and final testing results.</p></li><li><p>Prepare technical submittals related to laboratory testing and quality control requirements.</p></li><li><p>Conduct steel/MEP service scanning and confirm slab thickness prior to execution of related works.</p></li></ul><p><strong>C. Construction Responsibilities</strong></p><ul><li><p>Coordinate with the Foreman and Storekeeper regarding material delivery and availability.</p></li><li><p>Prepare &/or support the preparation of revised and updated shop drawings with the main office.</p></li><li><p>Prepare concrete orders based on daily site requirements.</p></li><li><p>Prepare steel reinforcement detailing, BBS, and structural shop drawings.</p></li><li><p>Ensure accurate execution of architectural, structural, and MEP works in compliance with project specifications.</p></li></ul><p><strong>D. Investigation Work Responsibilities</strong></p><ul><li><p>Prepare indicative test drawings in coordination with the design team and Project Engineer.</p></li><li><p>Perform Non-Destructive Testing (NDT) and Semi-Destructive Testing (SDT) using approved equipment.</p></li><li><p>Extract results from scanning tools and prepare corresponding technical reports.</p></li><li><p>Maintain and update test lists and test matrix sheets based on project needs.</p></li><li><p>Prepare concrete core samples and dust samples; coordinate submission with warehouse and lab teams.</p></li></ul><p><strong>Qualifications & Skills:</strong></p><ul><li><p><em>Bachelor’s Degree in Civil Engineering or Quantity Surveying.</em></p></li><li><p><em>Strong understanding of construction methodologies, testing procedures, and MEP/structural coordination.</em></p></li><li><p><em>Proficiency in AutoCAD, Microsoft Office, and QS software tools.</em></p></li><li><p><em>Strong communication, analytical, and reporting skills.</em></p></li><li><p><em>Ability to work in fast-paced environments and manage multiple tasks.</em></p></li><li><p><em>High attention to detail and excellent document control discipline.</em></p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Structural experience </p>

???? Location: Umm Al Quwain, UAE - Synergy Controls LLC.???? Experience: 3-4 Years<br>We are looking for an UAE experienced Estimation Engineer with a background in Industrial Automation and Motor Control Panels.<br>Key Responsibilities:Prepare cost estimates and quotations for:PLC Control Panels MCC/Switchgear Panels VFD Panels Soft Starter Panels Understand customer requirements and local design practices. Select suitable components and optimize costing for competitive bids. Analyze market pricing and supplier quotations.<br>Requirements:Degree/Diploma in Electrical Engineering.3-4 years relevant experience in control panel estimation. Good knowledge of automation systems, switchgear, VFDs, and panel design. UAE market experience is preferred.<br>Benefits: ✅ Company Visa.✅ Accommodation Provided.✅ Medical Insurance & Benefits as per UAE Labour Law.<br>???? Interested candidates may send their CV to gibson@synergycontrols.ae with the subject "Estimation Engineer Application".#Hiring #Estimation Engineer #Industrial Automation #PLC #Control Panels #VFD #Switchgear #UAEJobs #Umm AlQuwain #Electrical Engineering

<p>A <strong>Storm Water Civil Engineer </strong>is responsible for the planning, design, construction, and maintenance of <strong>stormwater drainage systems</strong>, including pipelines, culverts, manholes, catch basins, retention ponds, and flood control <strong>infrastructure</strong>. The role ensures compliance with project specifications, local authority regulations, and environmental standards</p><p><strong>Desired Candidate Profile</strong></p><p>STORM WATER</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b><span>Key Responsibilities *</span></b><br></p><br><p><i><span><span>Main duties and day-to-day tasks expected from the resource</span></span></i><br></p><br><p><span>Design, develop, and maintain enterprise-grade backend services, APIs, and microservices using Java and Spring Boot.</span><br></p><br><p><span>• Build secure, scalable, resilient, and high-performance banking applications supporting digital channels, mobile banking, internet banking, corporate banking, and integration platforms.</span><br></p><br><p><span>• Develop RESTful APIs and event-driven services while adhering to enterprise API standards and governance frameworks.</span><br></p><br><p><span>• Deploy and support applications on Microsoft Azure using cloud-native services and container platforms.</span><br></p><br><p><span>• Collaborate with architects, DevOps engineers, security teams, and product squads to deliver end-to-end solutions.</span><br></p><br><p><span>• Implement OAuth 2.0, OpenID Connect, JWT, API security, encryption, and secure coding standards.</span><br></p><br><p><span>• Troubleshoot production issues, optimize application performance, and support release management activities.</span><br></p><br><p><span>• Participate in Agile ceremonies, design reviews, code reviews, and CI/CD pipeline implementation</span><br></p><br><br><p><b><span>Required Skills *</span></b><br></p><br><p><i><span><span>Primary technical and functional skills</span></span></i><br></p><br><p><span>• Strong experience in Java 17+, Spring Boot, Spring Cloud, Spring Security, and Microservices Architecture.</span><br></p><br><p><span>• Hands-on experience in designing and developing REST APIs, OpenAPI/Swagger specifications, and API lifecycle management.</span><br></p><br><p><span>• Strong knowledge of API security including OAuth 2.0, OpenID Connect (OIDC), JWT, mTLS, and certificate management.</span><br></p><br><p><span>• Experience with Azure services including Azure Kubernetes Service (AKS), Azure App Services, Azure Key Vault, Azure Storage, Application Insights, and Azure DevOps.</span><br></p><br><p><span>• Experience with relational and NoSQL databases such as Oracle, PostgreSQL, SQL Server, MongoDB, and Redis.</span><br></p><br><p><span>• Strong understanding of design patterns, distributed systems, resilience patterns, and fault tolerance mechanisms.</span><br></p><br><p><span>• Knowledge of OWASP Top 10, and secure SDLC practices.</span><br></p><br><br><p><b><span>Required Experience / Knowledge Areas *</span></b><br></p><br><p><i><span><span>Specific domain or industry knowledge required</span></span></i><br></p><br><p><span>• 5+ years of backend development experience with at least 3 years building Spring Boot microservices.</span><br></p><br><p><span>• Proven experience delivering enterprise banking, fintech, payments, digital banking, or financial services solutions.</span><br></p><br><p><span>• Strong understanding of banking integration patterns, API Gateways (Kong, Layer7), and enterprise integration architecture.</span><br></p><br><p><span>• Experience working within regulated environments with strong security, audit, and compliance requirements.</span><br></p><br><p><span>• Experience building highly available and scalable systems supporting mission-critical customer journeys.</span><br></p><br><p><span>• Understanding of CI/CD, DevSecOps, cloud-native development, and containerized deployments.</span><br></p><br><p><span>• Experience with Kafka, IBM MQ, Rabbit MQ or other messaging technologies.</span><br></p><br><p><span>• Knowledge of OpenShift, Kubernetes, Docker, Istio Service Mesh, and container orchestration platforms.</span><br></p><br><br><p><b><span>Good-to-Have Skills</span></b><br></p><br><p><i><span><span>Additional skills that are an advantage but not mandatory</span></span></i><br></p><br><p><span>• Experience with API Management platforms such as Kong, Azure API Management.</span><br></p><br><p><span>• Knowledge of observability tools including Dynatrace, Grafana, Prometheus and App Insights.</span><br></p><br><p><span>• Experience with Corporate Banking, Trade Finance, Payments, Treasury, Lending, Customer Onboarding, or Digital Banking domains.</span><br></p><br><p><span>• Exposure to AI, cloud migration, and modernization programs.</span><br></p><br><br><p><b><span>Key Deliverables *</span></b><br></p><br><p><i><span><span>Expected outputs and outcomes from the resource</span></span></i><br></p><br><p><span>• Delivery of secure, scalable, and high-performing backend services and APIs.</span><br></p><br><p><span>• Development of reusable microservices and shared platform capabilities.</span><br></p><br><p><span>• Successful deployment and support of applications on Azure cloud platforms.</span><br></p><br><p><span>• Compliance with performance, security, audit, and regulatory requirements.</span><br></p><br><p><span>• Production-ready solutions with complete documentation, automated testing, monitoring, and operational support readiness.</span><br></p><br><p><span>• Achievement of defined NFRs for availability, latency, scalability, and resiliency.</span><br></p><br><br><p><b><span>Language Requirements</span></b><br></p><br><p><i><span><span>e.g. English only / Arabic preferred / Bilingual</span></span></i><br></p><br><p><span>English mandatory; Arabic is preferred.</span><br></p><br><br><p><b><span><span>SECTION 3 – CERTIFICATIONS &amp; TECHNICAL REQUIREMENTS</span></span></b><br></p><br><br><p><b><span>Certifications Required</span></b><br></p><br><p><i><span><span>e.g. AWS Certified, PMP, CISSP, Azure, ITIL</span></span></i><br></p><br><p><span>• Microsoft Azure Developer Associate (AZ-204) Preferred</span><br></p><br><p><span>• Microsoft Azure Fundamentals (AZ-900) Preferred</span><br></p><br><p><span>• Oracle Java Certification Preferred</span><br></p><br><p><span>• Kubernetes Certification (CKA/CKAD) Preferred</span><br></p><br><p><span>• Certified Scrum Developer or Agile Certification Preferred</span><br></p><br><br><p><b><span>Preferred Tech Stack</span></b><br></p><br><p><i><span><span>e.g. Python, Java, React, Kubernetes, Power BI</span></span></i><br></p><br><p><span>Java, Spring Boot, Spring Cloud, Spring Security, REST APIs, Microservices, Azure Kubernetes Service (AKS), Azure DevOps, Docker, Kubernetes, Kafka, Oracle, PostgreSQL, Redis, Kong API Gateway, OAuth 2.0, OpenID Connect, OpenAPI/Swagger</span><br></p><br><br><p><b><span>Tools / Platforms</span></b><br></p><br><p><i><span><span>e.g. JIRA, Confluence, GitHub, ServiceNow, Postman</span></span></i><br></p><br><p><span>JIRA, Confluence, Azure DevOps, SonarQube, Postman, Swagger/OpenAPI, Firebase, Figma, Jenkins, Splunk, Dynatrace, Grafana, Kubernetes/OpenShift</span><br></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description:</b></p><p>&nbsp;</p><p>The Enterprise Architect (EA) will play a critical role in shaping and governing the enterprise-wide technology architecture for the <b>Property &amp; Casualty (P&amp;C) Insurance business</b>. This role focuses on <b>Agentic AI adoption, digital solution architecture, API-first strategy, and core systems modernization</b>, ensuring alignment between business strategy and technology execution.</p><p>&nbsp;</p><p>The EA will act as a strategic partner to business leaders, product teams, and delivery organizations—driving a <b>future-ready, AI-enabled, composable insurance architecture</b> that accelerates time-to-market, improves operational efficiency, and supports new business models.</p><p>&nbsp;</p><p><b>What you will do</b></p><p>&nbsp;</p><p><b>1. Enterprise &amp; Domain Architecture (P&amp;C Insurance)</b></p><p>&nbsp;</p><ul><li>Define and maintain the <b>target enterprise architecture</b> for P&amp;C insurance across underwriting, policy administration, claims, billing, reinsurance, and distribution.</li><li>Develop <b>domain-level reference architectures</b> aligned to business capabilities, value streams, and operating models.</li><li>Ensure architectural consistency across lines of business while enabling controlled flexibility and innovation.</li><li>Translate business strategy into <b>clear architectural roadmaps</b> and investment-guiding principles.</li></ul><p>&nbsp;</p><p><b>2. Agentic AI &amp; Intelligent Automation</b></p><p>&nbsp;</p><ul><li>Define the <b>enterprise architecture for Agentic AI</b>, including autonomous agents, orchestration layers, decision engines, and human-in-the-loop models.</li><li>Partner with data, AI, and business teams to embed AI agents into core insurance processes (e.g., FNOL, claims handling, underwriting triage, fraud detection, agent assist).</li><li>Establish guardrails for <b>AI governance, ethics, security, explainability, and regulatory compliance</b>.</li><li>Drive reuse of AI capabilities via platforms, services, and APIs rather than point solutions.</li></ul><p>&nbsp;</p><p><b>3. Digital &amp; Experience Architecture</b></p><p>&nbsp;</p><ul><li>Architect <b>digital platforms</b> supporting omnichannel experiences for customers, agents, brokers, and partners.</li><li>Guide the evolution of portals, mobile apps, workflow tools, and low-code/no-code platforms.</li><li>Ensure digital solutions are <b>scalable, API-driven, event-enabled</b>, and aligned with experience and journey design.</li></ul><p>&nbsp;</p><p><b>4. API &amp; Integration Strategy</b></p><p>&nbsp;</p><ul><li>Own the <b>API-first and event-driven architecture strategy</b> across the enterprise.</li><li>Define standards for REST, event streaming, and async integration patterns.</li><li>Enable ecosystem integration with partners, insurtechs, intermediaries, and regulators.</li><li>Govern API lifecycle, security, versioning, and developer enablement.</li></ul><p>&nbsp;</p><p><b>5. Core Systems Modernization</b></p><p>&nbsp;</p><ul><li>Lead architectural strategy for <b>modernizing core P&amp;C systems</b> (policy, claims, billing), including:</li><li>Legacy decomposition and strangler patterns</li><li>SaaS / packaged core platforms</li><li>Microservices and composable architectures</li><li>Ensure coexistence and transition strategies between legacy and modern platforms.</li><li>Balance technical modernization with business continuity and regulatory obligations.</li></ul><p>&nbsp;</p><p><b>6. Architecture Governance &amp; Delivery Enablement</b></p><p>&nbsp;</p><ul><li>Establish and lead <b>architecture governance</b>, including standards, principles, and design reviews.</li><li>Work closely with product owners, engineers, and delivery teams to ensure architecture is executable.</li><li>Provide architectural decision support for major initiatives, vendor selections, and investment cases.</li><li>Act as a technology thought partner for senior leadership and transformation programs.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills to be successful</b></p><p>&nbsp;</p><p><b>Education</b></p><ul><li>Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.</li></ul><p>&nbsp;</p><p><b>Experience</b></p><ul><li>12+ years of experience in enterprise or solution architecture roles.</li><li>Strong experience in <b>P&amp;C insurance</b> (carrier-side preferred).</li><li>Proven track record in <b>large-scale digital transformation and core modernization</b>.</li><li>Hands-on experience with <b>API platforms, integration architecture, and cloud-native designs</b>.</li><li>Solid understanding of <b>AI/ML architectures</b>, with practical exposure to intelligent automation or agent-based systems.</li></ul><p>&nbsp;</p><p><b>Technical Knowledge</b></p><ul><li>Enterprise architecture frameworks (e.g., TOGAF, ArchiMate).</li><li>Cloud platforms (Azure, AWS, or GCP).</li><li>Microservices, event-driven architectures, and integration middleware.</li><li>Core insurance platforms and ecosystem tooling.</li><li>Data, AI, and analytics platforms (conceptual and architectural depth).</li></ul><p>&nbsp;</p><p><b>What equips you for the role</b></p><p>&nbsp;</p><p><b>Desired Attributes</b></p><ul><li>Strategic thinker with strong <b>business–technology translation skills</b>.</li><li>Comfortable influencing senior stakeholders without direct authority.</li><li>Pragmatic, outcome-oriented architect—not ivory-tower.</li><li>Strong communication and storytelling skills, especially for executives.</li><li>Passion for <b>AI-enabled transformation and future insurance models</b>.</li></ul><p>&nbsp;</p><p><b>What Success Looks Like</b></p><p>&nbsp;</p><ul><li>Clear, actionable enterprise and domain architectures aligned to business strategy.</li><li>Scalable adoption of Agentic AI across core insurance processes.</li><li>API-driven, composable architecture enabling speed and ecosystem integration.</li><li>Controlled modernization of legacy cores with measurable business impact.</li><li>Architecture seen as an <b>enabler of value</b>, not a constraint.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><span>Lead the design of end-to-end solutions across data platforms and digital engineering initiatives. <br></span></li><li><span>Translate business needs into technical architecture and design specifications.<br></span></li><li><span>Ensure solutions are aligned with enterprise architecture frameworks and best practices (e.g., TOGAF).<br></span></li><li><span>Collaborate with cross-functional teams—including business analysts, data engineers, software developers, and DevOps—to deliver cohesive and scalable solutions.<br></span></li><li><span>Evaluate and select appropriate technologies, platforms, and frameworks to meet project and organizational needs.<br></span></li><li><span>Develop and maintain architectural artifacts, including high-level designs, data flow diagrams, system interactions, and integration patterns.<br></span></li><li><span>Drive the approval of the high-level designs through the governance process.<br></span></li><li><span>Perform Business capability modeling, business capability assessment including identification of gaps and opportunities, As-Is, Transition &amp; Target Architecture views and recommend roadmaps/initiatives with prioritization.<br></span></li><li><span>Advocate and enforce architectural principles, standards, patterns and policies<br></span></li><li><span>Provide technical leadership, guidance, and mentorship to engineering teams.<br></span></li><li><span>Stay up to date on emerging technologies, industry trends, and best practices in data architecture and digital engineering.</span><br></li><li><span><span>Able to perform architecture assessments and present the findings and recommendations tailored for senior leadership audience</span><br></span><br></li></ul><br><span>Requirements</span><ul><li><span>Minimum of 15 years of experience in IT, including at least 5 years in a solution architecture role with significant exposure to both data and digital engineering environments. <br></span></li><li><span>Experience in Business Architecture including business capability modeling, business capability assessment including identification of gaps and opportunities, As-Is, Transition &amp; Target Architecture views and recommending roadmaps/initiatives with prioritization. Good presentation (Microsoft PowerPoint) and communication skills are mandatory.<br></span></li><li><span>Experience in Automotive Dealership &amp; Distribution industry (New and Used vehicles).<br></span></li><li><span>Strong exposure to AI and Gen AI technologies and experience with the Azure cloud platform and related technologies.<br></span></li><li><span>Preferred Certifications: TOGAF, CBA.<br></span></li><li><span>Strong understanding of software engineering principles and experience with microservices, APIs, and integration patterns.<br></span></li><li><span>Strong problem-solving and analytical abilities.<br></span></li><li><span>Excellent communication and presentation skills, with the ability to convey complex technical concepts to diverse audiences.<br></span></li><li><span>Strong analytical and problem-solving skills, with a focus on delivering business value through AI solutions.<br></span></li><li><span>Experience in architecture governance.<br></span></li><li><span>Ability to work collaboratively in a team-oriented environment.<br></span></li><li><span>Experience in Agile/Scrum environments.<br></span></li><li><span>Familiarity with modern DevOps practices and CI/CD pipelines.<br></span></li><li><span>Bachelor’s degree in computer science, Information Technology, Engineering, or a related field.<br></span></li><li><span>Relevant technical professional certifications, such as Microsoft Certified: Azure Solutions Architect Expert, Azure AI fundamentals are highly valued.</span><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Careem is building the Everything App for the greater Middle East — making it easy to move around, order food and groceries, manage payments, and more. Our purpose is simple: to simplify and improve people’s lives and build an awesome organisation that inspires.</span><br><span>Since 2012, Careem has enabled earnings for over 2.5 million Captains, simplified the lives of more than 70 million customers, and built a platform where the region’s best talent and entrepreneurs thrive. We operate in 70+ cities across 10 countries, from Morocco to Pakistan.</span></p><br><p><span><strong><em>We’re now entering our next chapter — one powered by AI. We’re looking for AI talent: curious problem-solvers who know how to apply AI to build tools, automate workflows, and create real impact. Whether it’s streamlining operations, enhancing customer experience, or reimagining internal systems — we want people who can make Careem work smarter and move faster.</em></strong></span></p><br><br>About Careem<p>At Careem, our journey started with a simple purpose: to simplify and improve the lives of people in the Greater Middle East. From our beginnings as a ride-hailing service, we’ve grown into the region’s first Everything App, but our mission remains the same. We’re not just a tech company; we’re a team of builders, dreamers, and doers, working to create a better future for our region.</p><br>About the Role<p>Calling senior technology leaders to shape the future of engineering in the Middle East. We’re looking to connect with senior tech professionals who have built and scaled complex engineering systems, platforms, or infrastructure in high-growth tech environments. Your expertise is exactly what’s needed to shape the future of engineering culture and technical foundations in the region.</p><br><p>To be clear: this is a <strong>hands-on, individual-contributor leadership role</strong> — not a people-management position. We need someone who still writes code, designs systems, and leads through technical depth and execution, not through managing headcount.</p><br>Key Responsibilities<ul><li><strong>Lead Internal Engineering Initiatives:</strong> Personally design and build scalable, secure, and maintainable systems that accelerate engineering productivity and reliability across Careem.</li><li><strong>Architect Scalable Solutions:</strong> Define system architecture for complex backend systems with a focus on performance, modularity, and extensibility, leveraging deep expertise in Golang and modern platforms.</li><li><strong>Drive Impact in Data &amp;amp; AI:</strong> Apply machine learning, platformization, and agentic AI innovation to unlock new capabilities and improve customer experiences at scale.</li><li><strong>Product Mindset &amp;amp; Technical Influence:</strong> Shape roadmaps and drive technical decisions with a product-centric mindset, ensuring solutions directly impact customer and business outcomes.</li><li><strong>Technical Excellence &amp;amp; Culture:</strong> Set the bar for code quality, system design, testing, and operational excellence by writing and reviewing production code, and by example rather than management.</li><li><strong>Mentorship and Knowledge Sharing:</strong> Mentor engineers as a peer through pairing, code review, and design discussions, growing technical capability across the organization without formal reporting lines.</li><li><strong>Efficiency and Automation:</strong> Streamline workflows and reduce toil through automation in CI/CD, observability, and configuration management.</li><li><strong>Cross-functional Collaboration:</strong> Partner with other platforms, infrastructure, product, and security teams to deliver robust and aligned solutions.</li><li><strong>Long-term Vision &amp;amp; Purpose:</strong> Contribute to Careem’s mission of shaping the future of mobility, fintech, and everyday services in the region by building lasting technical foundations, hands-on.</li></ul><p>&amp;nbsp;</p><br>What we’ll provide you<p>We offer colleagues the opportunity to drive impact in the region while they learn and grow. As a full time Careem colleague, you will be able to:</p><br><ul><li>Work and learn from great minds by joining a community of inspiring colleagues.</li><li>Put your passion to work in a purposeful organisation dedicated to creating impact in a region with a lot of untapped potential.</li><li>Explore new opportunities to learn and grow every day.</li><li>Work 4 days a week in office &amp;amp; 1 day from home, and remotely from any country in the world for 30 days a year with unlimited vacation days per year. (If you are in an individual contributor role in tech, you will have 2 office days a week and 3 to work from home.)</li><li>Access to healthcare benefits and fitness reimbursements for health activities including gym, health club, and training classes.</li></ul><p>&amp;nbsp;</p><br> </div>

<ul><li><p><strong>SENIOR STRUCTURAL ENGINEER ( DAR Interface Engineer )</strong></p><p>Exp: 12+ years in Infrastructure Projects in Gulf Region</p><p>-----</p><p>*Should have experience with major Infrastructure / airport / underground project experience . Strong reinforced-concrete expertise and direct experience with consultants and shop-drawing approvals</p><p>*Participate in discussions with DAR, Interpret consultants comments & develop technical responses</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelors degree in Structural or Civil Engineering from a reputable institution.</p></li><li><p>Minimum of 12+ years of progressive experience in structural engineering, with a strong focus on reinforced concrete knowledge</p><p><br></p><p><u>Share CVs with Current Location, Notice Period, Expected Salary & Active Mobile Numbers</u><br></p></li></ul>

<p>We are currently recruiting for a semi-government real estate developer in Abu Dhabi, UAE, seeking a detail-oriented Associate – Internal Audit. The successful candidate will support audit engagements, internal control reviews, and process assessments, helping identify risks and strengthen internal controls while working closely with the Senior Manager, Internal Audit. Key Responsibilities: • Support the development of the risk-based Annual Audit Plan through research, data analysis, and risk assessments. Support the development of the risk-based Annual Audit Plan through research, data analysis, and risk assessments. • Execute internal audit engagements, including process walkthroughs, control testing, sample selection, and documentation of audit evidence. • Prepare accurate and well-structured audit working papers that support audit findings and conclusions. • Assist in drafting audit reports, including observations, root cause analyses, risk assessments, and recommendations. • Evaluate the design and effectiveness of internal controls and identify process improvements and control deficiencies. • Assess operational, financial, and compliance risks across business functions and escalate significant findings where appropriate. • Support reviews of new systems, business processes, and transformation initiatives to ensure appropriate risk and control measures are embedded. • Monitor the implementation of agreed management action plans and follow up on the progress of remediation activities. • Assist in coordinating with external auditors by providing audit documentation and responding to information requests. • Contribute to audit reporting through data analysis, preparation of supporting documentation, and management reporting. • Ensure audit activities comply with the International Professional Practices Framework (IIA Standards), COSO Framework, and relevant UAE regulations.</p><p>• Bachelor's degree in Civil Engineering, Construction or a related field, PMP preferred. • 3-5 years of relevant work experience in internal/ external audit, risk advisory, internal controls, or project audit, preferably within real estate, development, construction, infrastructure, hospitality, or asset-intensive sectors • Working Knowledge of IIA Standards and COSO Framework • Familiarity with UAE Real Estate and Property Development Regulations • Critical Thinking • Risk & Controls Fundamentals</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Job Title: Lead Commissioning Engineer (Mechanical/Piping) – Offshore, WHT’s, Platform, Subsea Cable<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Lead Commissioning Engineer (Mechanical/Piping) – Offshore, WHT’s, Platform, Subsea Cable</span></u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Contractors Office/ Fabrication Yard Office in Abu Dhabi for some time and then will later move to Offshore Site on 6 weeks on/ 3 weeks off rotation.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The <b>Lead Commissioning Engineer (Mechanical/Piping)</b> is responsible for planning, coordinating, and leading all Mechanical and Piping commissioning activities for offshore and onshore Oil &amp; Gas projects, ensuring safe, efficient, and compliant system handover from Construction to Operations.</p><br><br><p>The role provides technical leadership during pre-commissioning, commissioning, start-up, performance testing, and handover phases, ensuring that mechanical and piping systems are tested, commissioned, and integrated in accordance with project specifications, operational requirements, HSE standards, and client expectations.</p><br><br><p>The position serves as the focal point between Engineering, Construction, Commissioning, Operations, Vendors, and Client representatives throughout project execution.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Commissioning Leadership</b></p><br><br><ul><li>Lead Mechanical and Piping commissioning activities from system completion through start-up and final handover.</li><li>Develop and implement commissioning strategies, execution plans, procedures, and schedules.</li><li>Coordinate multidisciplinary commissioning activities to ensure seamless system integration.</li><li>Manage commissioning engineers, supervisors, technicians, and contractor personnel.</li><li>Ensure commissioning targets and project milestones are achieved safely and efficiently.</li></ul><p><b>Pre-Commissioning Management</b></p><br><br><ul><li>Plan and supervise pre-commissioning activities including:<ul><li>Mechanical Completion Verification</li><li>System Walkdowns</li><li>Line Checking</li><li>Flushing and Cleaning</li><li>Air Blowing</li><li>Water Flushing</li><li>Hydrostatic Testing</li><li>Pneumatic Testing</li><li>Leak Testing</li><li>Drying and Preservation Activities</li></ul></li><li>Verify readiness for commissioning and start-up activities.</li><li>Ensure punch list identification and closure processes are effectively managed.</li></ul><p><b>Mechanical &amp; Piping Commissioning</b></p><br><br><p>Coordinate commissioning activities for:</p><br><br><ul><li>Process Piping Systems</li><li>Utility Piping Systems</li><li>Wellhead Facilities</li><li>Offshore Platforms and Topsides</li><li>Wellhead Towers (WHTs)</li><li>Jackets and Bridges</li><li>Subsea Tie-In Supports</li><li>Pressure Vessels</li><li>Heat Exchangers</li><li>Pumps</li><li>Compressors</li><li>Tanks</li><li>Filters and Strainers</li><li>Pigging Facilities</li><li>Mechanical Packages</li><li>Safety Relief Systems</li><li>Produced Water Systems</li><li>Firewater Systems</li><li>HVAC Mechanical Systems</li></ul><p><b>Start-Up &amp; Operational Readiness</b></p><br><br><ul><li>Lead system energization and start-up activities.</li><li>Develop commissioning sequences and start-up procedures.</li><li>Coordinate operational readiness reviews.</li><li>Support performance testing and system acceptance activities.</li><li>Ensure all systems meet design intent and operational requirements.</li><li>Facilitate smooth transfer of facilities to Operations.</li></ul><p><b>Interface &amp; Coordination</b></p><br><br><ul><li>Coordinate with Engineering, Construction, QA/QC, Operations, HSE, Vendors, and Client teams.</li><li>Participate in commissioning meetings, readiness reviews, and management progress sessions.</li><li>Interface with package vendors during testing, start-up, and troubleshooting activities.</li><li>Resolve technical issues impacting commissioning schedules and system performance.</li></ul><p><b>Mechanical Completion &amp; Handover</b></p><br><br><ul><li>Manage Mechanical Completion (MC) activities and certification processes.</li><li>Review and verify system completion dossiers.</li><li>Ensure timely closure of punch items and deficiencies.</li><li>Coordinate turnover packages and handover documentation.</li><li>Facilitate Final Acceptance and project close-out activities.</li></ul><p><b>HSE Responsibilities</b></p><br><br><ul><li>Ensure all commissioning activities comply with project HSE requirements and company procedures.</li><li>Lead commissioning risk assessments, SIMOPS reviews, and Job Safety Analysis (JSA) activities.</li><li>Ensure proper implementation of Permit-to-Work (PTW) systems.</li><li>Promote a strong safety culture during commissioning and start-up phases.</li><li>Participate in incident investigations and implementation of corrective actions.</li></ul><p><b>Quality Assurance</b></p><br><br><ul><li>Verify compliance with project specifications, commissioning procedures, and industry standards.</li><li>Review test records, commissioning reports, and completion documentation.</li><li>Ensure proper documentation of commissioning results and system performance.</li><li>Support quality audits and client inspections.</li><li>Ensure accurate as-built and turnover records are maintained.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor's Degree in Mechanical Engineering or related Engineering discipline.</li></ul><p><b>Preferred Certifications</b></p><br><br><ul><li>PMP Certification</li><li>BOSIET/HUET (for Offshore Projects)</li><li>NEBOSH or Equivalent HSE Certification</li><li>Completions &amp; Commissioning Management Certification (Preferred)</li></ul><br><p><b>Experience</b></p><br><br><ul><li>Minimum <b>18- 22 years</b> of experience in Mechanical and Piping Commissioning within Oil &amp; Gas, Petrochemical, Refining, LNG, or Offshore EPC/EPCI projects.</li><li>Minimum <b>5 years</b> in a Lead Commissioning Engineer or Senior Commissioning role.</li><li>Proven experience in:<ul><li>Offshore Platforms and Topsides</li><li>Wellhead Towers (WHTs)</li><li>Jackets and Bridges</li><li>Process Facilities</li><li>Water Injection Systems</li><li>Utility Systems</li><li>Mechanical Packages</li><li>Brownfield Modifications and Tie-Ins</li></ul></li><li>Experience supporting pre-commissioning, commissioning, start-up, and operational handover phases.</li><li>Previous ADNOC, Saudi Aramco, QatarEnergy, or major operator project experience is preferred.</li></ul><br><br><br> </div>

*Job Description – Design Engineer – CAD & Solid Works | Automotive*<br><br>Position:* Design Engineer – CAD & Solid Works Industry:* Automotive / Auto Components Manufacturing Department:* Product Design / R&DLocation:* Dubai, UAEExperience:* 2-4 Years Salary:* AED 4,000 – AED 5,000 per month + Benefits Employment Type:* Full-Time Joining:* Immediate / 30 Days Notice<br><br>*Job Summary*<br><br>We are hiring a Design Engineer for a leading automotive company in Dubai. Candidate must have strong hands-on experience in Solid Works and 2D CAD for designing automotive components, tools, jigs & fixtures. Manufacturing background preferred - you should understand how designs translate to shop floor production.<br><br>*Key Responsibilities*<br><br> Develop 3D models and detailed 2D drawings using Solid Works & Auto CAD for automotive parts, assemblies, and tooling. Design jigs, fixtures, and sheet metal components for production and quality checking. Create BOM, GD&T drawings, and technical documentation as per automotive standards. Coordinate with manufacturing, tooling, and production teams to ensure designs are manufacturable. Support prototype development, testing, and design modifications based on shop floor feedback. Maintain design data, revision control, and engineering change notes. Work closely with suppliers and vendors for tooling and component sourcing. Ensure compliance with automotive industry standards and client specifications.<br><br>*Required Qualifications*<br><br> B. E. / http://B. Tech / Diploma in Mechanical Engineering. 2-4 years of hands-on experience in CAD design for automotive components. Advanced proficiency in Solid Works: Part modeling, Assembly, Sheet Metal, Surface, Drawings. Knowledge of Auto CAD 2D drafting. Understanding of manufacturing processes: Machining, Sheet Metal, Casting, Welding. Experience with GD&T, tolerance stack-up, and ISO automotive standards preferred. Candidates with direct manufacturing/shop floor background will be preferred.<br><br>*Preferred Skills*<br><br> Exposure to automotive jigs/fixtures, plastic/metal components design. Knowledge of PDM/PLM software. UAE/GCC experience is an advantage.<br><br>Work Location: Dubai, UAE.<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: solidworks,cad,automotive,fixtures,metal,manufacturing,design,jigs,sheet metal,components

*Job Description – Design Engineer – CAD & Solid Works | Automotive*<br><br>Position:* Design Engineer – CAD & Solid Works Industry:* Automotive / Auto Components Manufacturing Department:* Product Design / R&DLocation:* Dubai, UAEExperience:* 2-4 Years Salary:* AED 4,000 – AED 5,000 per month + Benefits Employment Type:* Full-Time Joining:* Immediate / 30 Days Notice<br><br>*Job Summary*<br><br>We are hiring a Design Engineer for a leading automotive company in Dubai. Candidate must have strong hands-on experience in Solid Works and 2D CAD for designing automotive components, tools, jigs & fixtures. Manufacturing background preferred - you should understand how designs translate to shop floor production.<br><br>*Key Responsibilities*<br><br> Develop 3D models and detailed 2D drawings using Solid Works & Auto CAD for automotive parts, assemblies, and tooling. Design jigs, fixtures, and sheet metal components for production and quality checking. Create BOM, GD&T drawings, and technical documentation as per automotive standards. Coordinate with manufacturing, tooling, and production teams to ensure designs are manufacturable. Support prototype development, testing, and design modifications based on shop floor feedback. Maintain design data, revision control, and engineering change notes. Work closely with suppliers and vendors for tooling and component sourcing. Ensure compliance with automotive industry standards and client specifications.<br><br>*Required Qualifications*<br><br> B. E. / http://B. Tech / Diploma in Mechanical Engineering. 2-4 years of hands-on experience in CAD design for automotive components. Advanced proficiency in Solid Works: Part modeling, Assembly, Sheet Metal, Surface, Drawings. Knowledge of Auto CAD 2D drafting. Understanding of manufacturing processes: Machining, Sheet Metal, Casting, Welding. Experience with GD&T, tolerance stack-up, and ISO automotive standards preferred. Candidates with direct manufacturing/shop floor background will be preferred.<br><br>*Preferred Skills*<br><br> Exposure to automotive jigs/fixtures, plastic/metal components design. Knowledge of PDM/PLM software. UAE/GCC experience is an advantage.<br><br>Work Location: Dubai, UAE.<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: solidworks,cad,automotive,fixtures,metal,manufacturing,design,jigs,sheet metal,components

*Job Description – Design Engineer – CAD & Solid Works | Automotive*<br><br>Position:* Design Engineer – CAD & Solid Works Industry:* Automotive / Auto Components Manufacturing Department:* Product Design / R&DLocation:* Dubai, UAEExperience:* 2-4 Years Salary:* AED 4,000 – AED 5,000 per month + Benefits Employment Type:* Full-Time Joining:* Immediate / 30 Days Notice<br><br>*Job Summary*<br><br>We are hiring a Design Engineer for a leading automotive company in Dubai. Candidate must have strong hands-on experience in Solid Works and 2D CAD for designing automotive components, tools, jigs & fixtures. Manufacturing background preferred - you should understand how designs translate to shop floor production.<br><br>*Key Responsibilities*<br><br> Develop 3D models and detailed 2D drawings using Solid Works & Auto CAD for automotive parts, assemblies, and tooling. Design jigs, fixtures, and sheet metal components for production and quality checking. Create BOM, GD&T drawings, and technical documentation as per automotive standards. Coordinate with manufacturing, tooling, and production teams to ensure designs are manufacturable. Support prototype development, testing, and design modifications based on shop floor feedback. Maintain design data, revision control, and engineering change notes. Work closely with suppliers and vendors for tooling and component sourcing. Ensure compliance with automotive industry standards and client specifications.<br><br>*Required Qualifications*<br><br> B. E. / http://B. Tech / Diploma in Mechanical Engineering. 2-4 years of hands-on experience in CAD design for automotive components. Advanced proficiency in Solid Works: Part modeling, Assembly, Sheet Metal, Surface, Drawings. Knowledge of Auto CAD 2D drafting. Understanding of manufacturing processes: Machining, Sheet Metal, Casting, Welding. Experience with GD&T, tolerance stack-up, and ISO automotive standards preferred. Candidates with direct manufacturing/shop floor background will be preferred.<br><br>*Preferred Skills*<br><br> Exposure to automotive jigs/fixtures, plastic/metal components design. Knowledge of PDM/PLM software. UAE/GCC experience is an advantage.<br><br>Work Location: Dubai, UAE.<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: solidworks,components,fixtures,cad,sheet metal,metal,manufacturing,automotive,jigs,design

*Job Description – Design Engineer – CAD & Solid Works | Automotive*<br><br>Position:* Design Engineer – CAD & Solid Works Industry:* Automotive / Auto Components Manufacturing Department:* Product Design / R&DLocation:* Dubai, UAEExperience:* 2-4 Years Salary:* AED 4,000 – AED 5,000 per month + Benefits Employment Type:* Full-Time Joining:* Immediate / 30 Days Notice<br><br>*Job Summary*<br><br>We are hiring a Design Engineer for a leading automotive company in Dubai. Candidate must have strong hands-on experience in Solid Works and 2D CAD for designing automotive components, tools, jigs & fixtures. Manufacturing background preferred - you should understand how designs translate to shop floor production.<br><br>*Key Responsibilities*<br><br> Develop 3D models and detailed 2D drawings using Solid Works & Auto CAD for automotive parts, assemblies, and tooling. Design jigs, fixtures, and sheet metal components for production and quality checking. Create BOM, GD&T drawings, and technical documentation as per automotive standards. Coordinate with manufacturing, tooling, and production teams to ensure designs are manufacturable. Support prototype development, testing, and design modifications based on shop floor feedback. Maintain design data, revision control, and engineering change notes. Work closely with suppliers and vendors for tooling and component sourcing. Ensure compliance with automotive industry standards and client specifications.<br><br>*Required Qualifications*<br><br> B. E. / http://B. Tech / Diploma in Mechanical Engineering. 2-4 years of hands-on experience in CAD design for automotive components. Advanced proficiency in Solid Works: Part modeling, Assembly, Sheet Metal, Surface, Drawings. Knowledge of Auto CAD 2D drafting. Understanding of manufacturing processes: Machining, Sheet Metal, Casting, Welding. Experience with GD&T, tolerance stack-up, and ISO automotive standards preferred. Candidates with direct manufacturing/shop floor background will be preferred.<br><br>*Preferred Skills*<br><br> Exposure to automotive jigs/fixtures, plastic/metal components design. Knowledge of PDM/PLM software. UAE/GCC experience is an advantage.<br><br>Work Location: Dubai, UAE.<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: design,components,manufacturing,solidworks,cad,sheet metal,jigs,automotive,fixtures,metal

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Six Construct, a subsidiary of the BESIX Group, is the largest Belgian construction company operating in the Middle East. The company combines the efforts of a highly skilled workforce, along with strategic planning and innovative use of technology to overcome the most complex business challenges. Six Construct is a multi-services company that operates in the construction of commercial and residential buildings, sport and leisure facilities, infrastructure and marine-related projects. The company currently employs a workforce of approximately 4,000 in the Middle East, and a total of 10,000 worldwide.</p><br><br>Job Description<br><p><strong>Why This Role Matters</strong></p><br><p>The Mechanical Engineer is responsible for supporting the planning, coordination, and execution of mechanical works across construction projects. The role ensures that mechanical systems are delivered in accordance with project specifications, quality standards, safety requirements, and project schedules. Working closely with project teams, consultants, subcontractors, and stakeholders, the Mechanical Engineer contributes to the successful delivery of high-quality developments while gaining valuable experience in the construction industry.</p><br><p><strong>What You'll Drive</strong></p><br><ul><li>Assist in the planning, coordination, and monitoring of mechanical works on site.</li><li>Review mechanical drawings, specifications, and technical documents to ensure compliance with project requirements.</li><li>Support the execution of HVAC, plumbing, fire protection, and other mechanical systems.</li><li>Coordinate with internal teams, consultants, subcontractors, and suppliers to ensure smooth project execution.</li><li>Monitor work progress and ensure activities are completed according to approved schedules.</li><li>Conduct site inspections and identify potential quality, safety, or technical issues.</li><li>Assist in resolving design, installation, and construction-related challenges.</li><li>Ensure compliance with company quality standards, project specifications, and HSE requirements.</li><li>Prepare technical reports, progress updates, and project documentation.</li><li>Participate in meetings with project stakeholders and support project delivery objectives.</li><li>Contribute to continuous improvement initiatives and engineering best practices.</li></ul><br>Qualifications<br><p><strong>You're a Great Fit If You Have</strong></p><br><p><strong>Education</strong></p><br><ul><li>Bachelor's Degree in Mechanical Engineering or a related discipline.</li></ul><p><strong>Experience</strong></p><br><ul><li>0–3 years of experience in construction, building services, or MEP projects.</li><li>Exposure to construction finishing and mechanical systems is preferred.</li><li>Internship or trainee experience within the construction industry is an advantage.</li></ul><p><strong>Skills &amp; Competencies</strong></p><br><ul><li>Strong communication and teamwork skills.</li><li>Ability to work effectively in a multicultural and fast-paced environment.</li><li>Proactive, detail-oriented, and eager to learn.</li><li>Good understanding of mechanical engineering principles and construction practices.</li><li>Ability to coordinate with multiple stakeholders and manage priorities effectively.</li><li>Commitment to quality, safety, and continuous professional development.</li></ul><p><strong>Additional Requirements</strong></p><br><ul><li>UAE National (required).</li><li>Passionate about contributing to landmark projects that shape the UAE's future.</li><li>Willingness to develop a long-term career within the construction and engineering industry.</li></ul><br>Additional Information<br><p><strong>Why You’ll Enjoy Working with Us</strong></p><br><ul><li>Competitive Benefits</li><li>Positive Workplace Culture</li><li>Opportunity to work with a leading international construction group</li><li>Exposure to large-scale, high-impact projects in the Middle East</li><li>Collaborative, diverse, and professional work environment</li><li>Career growth and development opportunities</li></ul><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> United Arab Emirates </div> </div>

Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.<br><br>About Eaton<br><br>Eaton is a power management company where we provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technology and services. Eaton has approximately 96,000 employees and sells products to customers in more than 175 countries.<br><br>We are seeking an experienced Senior Quotation Engineer to join our Middle East Engineering Team in Dubai, UAE.<br><br>As a Senior Quotation Engineer, for Busway Systems, you will play a pivotal role in delivering accurate and competitive quotations to our clients worldwide in accordance with customer technical engineering specifications and Eaton's procesudres and guidlines. Your primary focus will be on the Europe, Middle East, and Africa regions, ensuring a seamless technical and commercial experience by translating complex technical requirements into accurate, competitive and value-driven quotations.<br><br>What You’ll Do<br><br>As a Quotation Engineer for Busway systems, you will play a key role in delivering accurate, competitive, and technically sound quotations for customers across the Data Centre, Industrial, and Commercial & Institutional (C&I) segments. Your primary responsibility is to analyze customer requirements, interpret project drawings and specifications, and prepare optimized LV busway configurations and proposals in accordance with Eaton’s standards, processes, and commercial guidelines.<br><br>You will collaborate closely with Country Sales Organizations, Plants, Application Engineers, Product Management, and Business Development teams to ensure high-quality, timely quotations and provide technical and commercial support throughout the pre‑sales cycle. This role directly contributes to Eaton’s growth by enabling fast, reliable, and customer‑centric tender responses within the EMEA region and beyond.<br><br>Deliver high-quality quotations within agreed timelines, ensuring technical and commercial accuracy. Interpret and analyze customer specifications, single-line diagrams, layouts, and load schedules. Prepare optimized LV busway configurations, routing concepts, bill of materials, and pricing in alignment with company procedures and cost guidelines. Collaborate closely with Sales Organizations, Product Management, Engineering, and Manufacturing teams to ensure feasibility, compliance, and competitive positioning. Engage with customers and internal stakeholders to clarify technical requirements, design constraints, and commercial conditions. Ensure quotations comply with applicable standards. Stay informed on market and competitor offerings and use this insight to improve quotation competitiveness and technical positioning. Provide timely technical and commercial support to front-end sales teams throughout the pre‑bid and post‑tender phases. Manage multiple quotations simultaneously and prioritize workload according to business needs and tender deadlines. Maintain accurate quotation records, follow established workflows, and ensure adherence to Eaton’s pricing governance and approval processes. Contribute to continuous improvement by identifying cost‑out opportunities, process efficiencies, and feedback for product enhancements. This role primarily focuses on LV Busway quotations due to the strategic growth of the product line, while also supporting other MLVS product quotations when required.<br><br><br>Qualifications<br><br>Minimum BSc preferably electrical engineering or equivalent. A minimum of 3 years of experience in a similar position.<br><br><br>Skills<br><br>Strong knowledge of LV Busways Understanding on MV Switchgear and Transformers is a plus Insightful understanding of relevant market segments, such as Data Centre, Industrial, and Commercial & Institutional (C&I) Excellent command of English. Proficiency in an additional language such as Turkish or Dutch is considered an asset. Commercial acumen. Strong problem-solving and analytical skills. Ability to manage multiple projects and deadlines. Effective verbal and written communication skills<br><br><br>What we offer you<br><br>Being part of a company that has been in business for more than 100 years, is well known in the industry, and has a major impact on the energy industry. Work in a company that is commitment to Inclusion & Diversity and Sustainability. Annual mentoring program, Eaton University, a reward, and recognition system. Ongoing Learning and Career Development Opportunities in a global company. Build your career and apply internally for our open positions worldwide. Strong, agile and diverse team locally and globally. Strong processes and state-of-the-art systems and tools. Structured employee development processes, open feedback culture with development plans. Detailed induction support and well-structured onboarding. Balance your work and life with a hybrid worktime model.<br><br><br>Living and Working in Dubai<br><br>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.<br><br>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.<br><br>Ready to make a difference? Join Eaton’s Dubai Team and be part of a company shaping the future of sustainable manufacturing and power management!<br><br>We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br>Job Description<br><br>Assistant Resident Engineer (Electrical - Roads & Infrastructure)<br><br>Abu Dhabi, UAE<br><br>Parsons is looking for an amazingly talented Assistant Resident Engineer (Electrical) to join our team! In this role you will get to assist the Resident Engineer in administering the operational functions of the day-to-day activities on the project with respect to utilities works.<br><br>What You'll Be Doing<br><br>Report to the Resident Engineer and assist in supervising the construction of Electrical infrastructure works and associated items. Act in place of the Resident Engineer when on leave or absent. Coordinate his direct activities with the other engineers and members of the construction supervision team. Assist the Resident Engineer in reviewing of shop drawings, design proposals, method statements and other activities including correspondence related to the utility section and prepare replies for the review of the Resident Engineer. Coordinate with Parsons' design engineers for resolution of related issues. Maintain the daily diary and the daily reports by the inspectors. Coordinate with the contractor engineers on scheduling and application of resources. Direct, assist and monitor the performance of the inspectors and surveyors as applicable. Convene and chair special meetings with the service authorities, the contractor, subcontractors and other parties related to his work. Ensure accuracy and completeness of records. Ensure safety goals are achieved on the project and oversee implementation of safety procedures on the project. Prepare / Assist in the preparation of Weekly and Monthly progress reports. Act positively and participate in all health and safety issues at site, as required by the Resident Engineer and the project safety representatives. Provide all necessary on-site direction and assist the Resident Engineer to issue site instructions with respect to utilities works and associated items. Check and measure the performed work in his line of work, record and assist the Resident Engineer to display progress vs. programmed work. Ensure correctness and completeness of ‘as-built’ drawings within his line of work.<br><br><br>What Required Skills You'll Bring<br><br>Bachelor’s degree in Electrical Engineering with minimum 10 years of experience in design, site supervision, and construction management of (Electrical) infrastructure projects, including roads and bridges. A minimum of 2 years of proven experience managing supervision activities on large-scale infrastructure projects within Abu Dhabi is mandatory. Bachelor’s Degree and 10+ years postgraduate experience in design, site supervision and construction management of (Electrical) projects. Should be able to review and justify the material submissions, analyze laboratory and technical reports, carry out acceptance sampling plans, testing and quality measures, ensuring the compliance with the project’s Specifications. Must have a sound knowledge about contractual relationships. Must be fully computer literate and able to utilize computer technology to access data, maintain records, generate reports, etc. and any project specific engineering and construction relevant software. Must be fluent in English written and spoken with an excellent capability in written technical skills as well as oral and written communication skills. Keep necessary records and as-built records and take charge of the handing over of the utility works to the respective service authorities and assist the contractor to obtain necessary final clearance. Must be available in UAE.<br><br><br>What Desired Skills You'll Bring<br><br>Knowledge and Emphasis on Quality Assurance Specifications and Statistical Quality Control.<br><br><br>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

Role Description This part-time Mechanical Engineer role is a hybrid position based in Dubai, with a mix of on-site work and some work-from-home flexibility. The Mechanical Engineer will support the design, analysis, and optimization of mechanical systems and equipment for educational institutions, training facilities, and related infrastructure. Day-to-day tasks include developing and reviewing mechanical designs, preparing CAD models and technical drawings, performing calculations and simulations, and collaborating with multidisciplinary teams to ensure safety, efficiency, and compliance with local standards. The role involves contributing to small and medium-sized projects, coordinating with project managers on timelines and deliverables, and participating in research and development activities to introduce innovative solutions. The Mechanical Engineer will also assist in documentation, report writing, and providing technical support during installation, testing, and maintenance phases. Qualifications Strong foundation in Mechanical Engineering, with practical experience applying core principles to real-world systems. Proficiency in Machine Design and Computer-Aided Design (CAD) tools for developing detailed models, drawings, and specifications. Experience in Project Management, including planning, task coordination, and meeting project milestones in a multi-stakeholder environment. Research and Development (R&D) skills to evaluate new technologies, improve existing designs, and support innovation initiatives. Bachelor’s degree or higher in Mechanical Engineering or a closely related discipline. Ability to work effectively in a hybrid setting in Dubai, managing both on-site responsibilities and remote tasks. Good communication and collaboration skills, with the ability to present technical information clearly to non-technical stakeholders. Familiarity with relevant standards, safety regulations, and best practices in mechanical systems design; experience with educational or institutional projects is an advantage.

Structural Design Engineer Al Handasiyah Engineering Consultancy, a Second Category Engineering Consultancy based in Sharjah, UAE, is looking for an experienced Structural Design Engineer to join our growing team. Key Responsibilities Design reinforced concrete and steel structures in accordance with UAE codes and Sharjah Municipality regulations. Prepare structural calculations, design reports, and construction drawings. Submit, follow up, and manage projects through the Sharjah Municipality e-Permit System. Review and respond to municipality comments until project approval. Coordinate with architectural and MEP teams throughout the design process. Ensure compliance with local regulations and engineering standards. Requirements Bachelor's Degree in Civil or Structural Engineering. Minimum 4 years of structural design experience in the UAE. Proven experience in designing various building projects in Sharjah. Hands-on experience with Sharjah Municipality e-Permit System, including submissions, follow-up, and technical reviews. Sharjah Municipality Structural Design Exam (Ground +12) is mandatory. Proficient in:ETABSSAFEPROKONSAP2000Auto CADStrong knowledge of UAE building codes and structural design standards. Excellent communication and teamwork skills. Available to join immediately or within a short notice period. Job Details Location: Sharjah, United Arab Emirates Employment Type: Full-time Workplace Type: On-site If you meet the above requirements, we would love to hear from you. Apply now and become part of Al Handasiyah Engineering Consultancy.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</strong></p><br><p><em>We have an outstanding record in completing major Energy, Marine, Infrastructure and Defense &amp; Security projects around the globe and we pride ourselves on delivering over the years the kind of reliability and trust that the client has the right to expect from a major EPC contractor.</em></p><br><br>Job Description<br><p>We are constantly growing and are currently looking for <strong>Senior&nbsp;Welding&nbsp;QC Engineer&nbsp;</strong>to join a top qualified and knowledgeable quality controls team in one of our of project in Abu Dhabi, UAE.</p><br><p>Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.</p><br><p>Join our worldwide journey. Build on something that matters!</p><br><p><strong>What you will need to do:</strong></p><br><ul><li>Assists in the preparation of quality documentation, including the Inspection &amp; Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Welding work.</li><li>Monitors all phases and processes required for the effective completion of all work&nbsp;and in particular issues of design, procurement, construction and final hand over of the related Welding activities.</li><li>Monitors the implementation of Method Statements, and, Inspection &amp; Test Plans related to Welding activities, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.</li><li>Manages the inspection and testing of Welding activities&nbsp;in the&nbsp;area of assigned responsibilities, including monitoring the work of QC Inspectors under his authority.</li><li>Monitors the close out of punch lists established for incomplete related to Welding activities.</li><li>Monitors all measurement &amp; testing instruments employed for Welding, that they are functional and calibrated.</li><li>Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.</li><li>Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Welding activities.</li><li>Statistical analysis and evaluation of test data related to Welding activities.</li><li>Prepares, files, maintains test/inspection records and any other quality records generated related to Welding activities.</li><li>Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Welding activities.</li><li>Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.</li><li>Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.</li><li>Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Welding activities.</li><li>Where required, assists in the preparation of final document for certification.</li></ul><p><strong>What you will need to have:</strong></p><br><ul><li>Bachelor’s degree in Mechanical or&nbsp;Metallurgy Engineering with Master's Degree in Welding</li><li>At least 15&nbsp;years of experience in welding related activities within the Oil &amp; Gas Project environment (ADNOC experience is required).</li><li>Professional certification in welding engineering (IWE, CWE)</li><li>ASNT Level II in RT, UT, MT and PT</li><li>Certified ISO 9001:2015 Internal auditor. Lead auditor is preferred&nbsp;</li><li>Certified 3.1 CSWIP required, 3.2 is preferred</li><li>Knowledgeable in Welding Process, Welding Procedure Qualification in line with ASME SEC IX, AWS D1.1, API 1104, ISO 13847 , SHELL DEP , ADNOC specifications . Familiar with Welding defect identification and root causes with control measures to prevent occurrence , hands on welding training for implementation contractor and vendor welding teams , well versed in monitoring of welding repair data and welder performance . Shall be conversant with resolution of site welding issues including selection of welding consumable based on various material groupings. Ability to optimize welding procedure qualification based on material standard and production thickness</li><li>O&amp;G Projects experience.</li></ul><p><strong>You are someone who:</strong></p><br><ul><li>Good communication skills</li><li>Is able to work both independently, exercising professional judgment and coordination skills</li><li>Has excellent organizational skills</li></ul><p><strong>What's in it for you:&nbsp;</strong></p><br><p>Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come. At Archirodon, you will find a proud, productive and human-centric culture, caring for and building on our people and their development!&nbsp;</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring&nbsp;our </em><em>open vacancies</em><em> and our </em><em>LinkedIn</em><em>&nbsp;page!&nbsp; Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br>Additional Information<br><p>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><br><br><br> </div>