Production Engineer Jobs in UAE

The Senior Technician role carries ultimate accountability for the assigned section. Working alongside the Senior Welder and Senior Machinist, the collective goal is to enhance efficiency while maintaining quality and cost standards. Responsibilities encompass overseeing team leave, coordinating weekend overtime through the Workshop Coordinator, and guaranteeing access to essential tools and equipment. Effective utilization of the i Flight system is crucial for requisitioning parts and materials, enabling timely issuance by Stores or ordering by Production<br><br>Job Responsibilities<br><br>Utilization of i Flight/Intranet to request Material Requisitions against jobs for missing items Provide Clarification with scope of works to respective teams and identify required/missing spares, parts and tooling working with Production Engineer to raise PR Requests if not available from Material Requisition System Issuance of Route Sheets to their team and monitoring of their process through the section Insurance of Route Sheet Sign Off after completion of operations Identify and log all fault equipment on Maintenance Log System Organize and hold daily Tool Box Talks Manage Teams Leave, both holiday and sick and provide support to HR Manager where required Annual Skills Matrix Reviews supported by Production Engineer/Manager All other duties as assigned<br><br>Required Skills / Knowledge<br><br>10 Years Plus experience as Technician in supervisor position Must have ability to handle technical data from multiple sources. Good understanding of planning and logistic methodologies. Good communication skills in English language, both verbal and written. Computer Skills (Microsoft Word and Excel, Outlook). Product knowledge e.g. API Manufacture and repair, Roteq, Oil & Gas and general industrial equipment repair<br><br>Experience<br><br>6-10 Years Plus experience as Technician in supervisor position<br><br>Education Requirements<br><br>Minimum requires Diploma in Engineering, Degree in Engineering preferred. Minimum 2 years’ experience in a similar role.<br><br>Physical Requirements<br><br>To comply with Company and client quality, safety and environmental management systems and procedures at all times. Ensure all accidents / incidents/near misses / hazards are immediately reported and relevant paperwork is completed. Work within the team to develop a culture where everyone embraces, upholds and accepts responsibility for a safe workplace, a healthy working life, a sustainable environment and the right and duty to intervene<br><br>Ethos Energy is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

NMDC Group is seeking experienced engineers for major infrastructure, water desalination, power, utility, piling, and precast projects.<br>Requirements Bachelor's Degree in Engineering8–12 years of relevant experience in large-scale infrastructure, desalination, marine, piling, power substation, precast, industrial, or utility projects<br>Open Positions Maintenance Engineer – Precast Factory Production Engineer – Precast Factory Project Engineer / Site Engineer – Water Desalination Geotechnical Engineer – Infrastructure Project Engineer – Infrastructure MEP Engineer – Infrastructure Senior Project Engineer – Infrastructure Mechanical Site Engineer – Infrastructure Lifting Engineer – Power Substation Senior Project Engineer – Power Substation Senior Technical Office Engineer – Power Substation Civil, Electrical, Instrumentation, and Mechanical Engineers – Pipelines, Pumping Stations & MEP Systems Road/Earthwork Engineer Utility Engineer Technical Engineer – Piling Senior Project Engineer – Piling<br>How to Apply Send your updated CV to jainendra.srivastava@nmdc-group.com and mention the position applied for along with "Infrastructure Project" in the email subject line.<br>Please Include Total Infrastructure Project Experience Current Salary Expected Salary Notice Period Current Location Contact Number Date of Birth Nationality<br>Note: Only shortlisted candidates will be contacted for an interview.

NMDC Group is seeking experienced engineers for major infrastructure, water desalination, power, utility, piling, and precast projects.<br>Requirements Bachelor's Degree in Engineering8–12 years of relevant experience in large-scale infrastructure, desalination, marine, piling, power substation, precast, industrial, or utility projects<br>Open Positions Maintenance Engineer – Precast Factory Production Engineer – Precast Factory Project Engineer / Site Engineer – Water Desalination Geotechnical Engineer – Infrastructure Project Engineer – Infrastructure MEP Engineer – Infrastructure Senior Project Engineer – Infrastructure Mechanical Site Engineer – Infrastructure Lifting Engineer – Power Substation Senior Project Engineer – Power Substation Senior Technical Office Engineer – Power Substation Civil, Electrical, Instrumentation, and Mechanical Engineers – Pipelines, Pumping Stations & MEP Systems Road/Earthwork Engineer Utility Engineer Technical Engineer – Piling Senior Project Engineer – Piling<br>How to Apply Send your updated CV to jainendra.srivastava@nmdc-group.com and mention the position applied for along with "Infrastructure Project" in the email subject line.<br>Please Include Total Infrastructure Project Experience Current Salary Expected Salary Notice Period Current Location Contact Number Date of Birth Nationality<br>Note: Only shortlisted candidates will be contacted for an interview.

NMDC Group is seeking experienced engineers for major infrastructure, water desalination, power, utility, piling, and precast projects.<br>Requirements Bachelor's Degree in Engineering8–12 years of relevant experience in large-scale infrastructure, desalination, marine, piling, power substation, precast, industrial, or utility projects<br>Open Positions Maintenance Engineer – Precast Factory Production Engineer – Precast Factory Project Engineer / Site Engineer – Water Desalination Geotechnical Engineer – Infrastructure Project Engineer – Infrastructure MEP Engineer – Infrastructure Senior Project Engineer – Infrastructure Mechanical Site Engineer – Infrastructure Lifting Engineer – Power Substation Senior Project Engineer – Power Substation Senior Technical Office Engineer – Power Substation Civil, Electrical, Instrumentation, and Mechanical Engineers – Pipelines, Pumping Stations & MEP Systems Road/Earthwork Engineer Utility Engineer Technical Engineer – Piling Senior Project Engineer – Piling<br>How to Apply Send your updated CV to jainendra.srivastava@nmdc-group.com and mention the position applied for along with "Infrastructure Project" in the email subject line.<br>Please Include Total Infrastructure Project Experience Current Salary Expected Salary Notice Period Current Location Contact Number Date of Birth Nationality<br>Note: Only shortlisted candidates will be contacted for an interview.

<p>Functionally reports to: Production Engineering Manager. On Project reports to: Construction Manager. Liaise With PMT personnel, client representatives, fabrication and offshore supervisory personnel, Detailing / Drafting Center / Lead, Project Engineering Manager, Planning Manager, Discipline Design managers, Hook Up Manager, Marine Operations engineers.</p><p>Supervises Discipline production engineering group including production engineers, drafting squad leaders, materials controllers, planning engineers.</p><br><p>Key Tasks and Responsibilities:</p><br><ul><li><p>Responsible for the overall project inter-discipline coordination between members of the operations support groups, throughout one or more project phases of detail design, fabrication, offshore installation and hook-up.</p></li><li><p>Lead discipline Production Engineer Supervises other production engineers in his team.</p></li><li><p>Lead discipline Production Engineer identifies resource needs for the project and communicate these regularly to Production Engineering Manager.</p></li><li><p>Manage the progress reporting on the project.</p></li><li><p>Understands the full contractual scope of work, contract type and milestone schedules.</p></li><li><p>Reviews constructability and ensure work execution plan is based on the most productive option.</p></li><li><p>Conducts fabrication look ahead meetings or site meetings and prioritizes material and drawings to suit.</p></li><li><p>Responsible for documenting all scope of work changes (change orders) and coordinating AFC estimate updates.</p></li><li><p>Solves technical problems and initiates site queries to ensure work disruption is minimized and productivity is optimized.</p></li><li><p>Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Highlights issues to Operations Engineer or Construction Manager.</p></li><li><p>Leads work pack issuance and follow up of all activities for work pack execution.</p></li><li><p>Prepare project specific task listing.</p></li><li><p>At commencement of the project participates in fabrication kick-off meeting.</p></li><li><p>Appraises construction manager of any project issues which effect the forecasted progress, productivity and schedule commitments.</p></li><li><p>Develops a work pack index and sets priorities and deliverable dates for the discipline teams.</p></li><li><p>Reviews input deliverable dates (material & drawings) and advises impact to fabrication schedule.</p></li><li><p>Authorizes technical queries/correspondence to be issued to the client.</p></li><li><p>Participates in development of project fabrication execution plan to meet contract requirements most productively.</p></li><li><p>Leads project constructability program effort for fabrication.</p></li><li><p>Prepares project fabrication lessons learnt.</p></li><li><p>Identifies project risks and opportunities.</p></li><li><p>Establishes a productive working relationship with client representatives.</p></li><li><p>Leads coordination & follow up with service providers (Example: subcontractors, construction engineering teams).</p></li><li><p>Participates in QHSES initiatives and drives achieving objectives. Follows the company policies.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>15 plus years in oil and gas</p></li><li><p>7 years in management</p></li><li><p>Good knowlegde of fabrication/construction in offshore </p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervise and manage daily fabrication shop activities.</p></li><li><p>Plan and execute production activities, ensuring quality and safety standards.</p></li><li><p>Experience in fabrication of <strong>pressure vessels, heat exchangers, storage tanks, steel structures, and related equipment</strong>.</p></li><li><p>Coordinate with different departments, clients, and project teams.</p></li><li><p>Prepare reports, method statements, and production updates.</p></li><li><p>Maintain fabrication equipment, tools, and workshop activities.</p></li><li><p>Ensure compliance with welding procedures, quality standards, and HSE requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>8 years of experience</strong> in a similar supervisory role.</p></li><li><p>Experience working with fabrication companies having a workforce of <strong>30+ employees</strong>.</p></li><li><p>Gulf experience as <strong>Fabrication Supervisor / Foreman / Production Engineer</strong> is preferred.</p></li><li><p>Diploma or equivalent qualification in <strong>Mechanical Engineering</strong>.</p></li><li><p>Knowledge of:</p><ul><li><p>WPS, WPQ, PQR</p></li><li><p>Welding processes and inspection</p></li><li><p>Heat treatment</p></li><li><p>Material specifications</p></li><li><p>ASME Codes</p></li><li><p>QMS &amp; HSE requirements</p></li></ul></li><li><p>Good communication skills in English.</p></li></ul><p></p></section>

<ul><li><p>CNC PROGRAMER (turret / laser) </p></li><li><p>FRP PRODUCTION ENGINEER </p></li><li><p>Design and develop innovative engineering solutions that meet project specifications while adhering to industry standards.</p></li><li><p>Conduct feasibility studies and risk assessments to ensure project viability and minimize potential issues during execution.</p></li><li><p>Collaborate with cross-functional teams, including product managers and designers, to align technical requirements with user needs.</p></li><li><p>Prepare detailed technical documentation, including specifications, drawings, and reports, to facilitate clear communication among stakeholders.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Civil) from an accredited institution is essential.</li><li>A minimum of 3-5 years of relevant industry experience, demonstrating a proven track record in engineering projects.</li><li>Professional Engineer (PE) license or relevant certifications (e.g., Six Sigma, Project Management Professional) is highly preferred.</li><li>Experience in a specific industry (e.g., aerospace, automotive, construction) to enhance domain knowledge and expertise.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Code:</strong> 221/001/440<br><strong>Industry:</strong> Vehicle Manufacturing<br><br>We are seeking an experienced Production Engineer to lead and optimize manufacturing operations within a specialist vehicle manufacturing environment. The role is responsible for driving continuous improvement initiatives, leading production teams, improving build quality, and ensuring the efficient delivery of high-quality products while maintaining strict safety and operational standards.<br>This Production Engineer Job in Abu Dhabi is ideal for professionals with strong production leadership experience, a passion for Lean and Continuous Improvement methodologies, and expertise in vehicle manufacturing, fabrication, or heavy engineering environments.<br><br><strong>Production Leadership &amp; Optimisation</strong><br><ul><li>Lead, mentor, and manage a team of 50+ production operatives, technicians, and fabricators.</li><li>Own end-to-end production operations from chassis-in to final product sign-off.</li><li>Drive measurable reductions in production cycle time, defect rates, and labour hours through structured Agile and Continuous Improvement programs.</li><li>Develop and maintain production schedules, capacity plans, and resource allocation to achieve on-time delivery targets.</li><li>Implement visual management tools to improve workflow visibility across the shop floor.</li><li>Establish, improve, and develop Method Statements (MoS) to ensure clear and efficient production methods.</li></ul><strong>Vehicle Fabrication &amp; Manufacturing</strong><br><ul><li>Oversee all aspects of fabrication and manufacturing operations, including structural fabrication, panel fitting, welding, assembly, and finishing activities.</li><li>Establish and enforce Standard Operating Procedures (SOPs) and Method Statements (MoS) to ensure repeatability and consistency.</li><li>Collaborate with design and engineering teams to resolve manufacturing issues and support new product introductions.</li><li>Conduct or oversee pre-delivery inspections to ensure products meet company quality standards.</li></ul><strong>Health, Safety &amp; HSE Compliance</strong><br><ul><li>Champion a zero-harm safety culture across the production floor and ensure full compliance with UAE health and safety regulations.</li><li>Conduct regular HSE risk assessments and toolbox talks.</li><li>Maintain HSE records, SDS registers, and staff training logs.</li><li>Lead incident investigations, root cause analyses, and corrective action implementation.</li><li>Ensure all employees receive appropriate PPE, inductions, and ongoing safety training.</li></ul><strong>Continuous Improvement</strong><br><ul><li>Champion an Agile and Continuous Improvement mindset throughout the production team.</li><li>Identify production bottlenecks using value stream mapping, 5S, and root cause analysis tools.</li><li>Lead structured Continuous Improvement projects with measurable outcomes.</li><li>Report project progress and outcomes to senior management with supporting data and ROI analysis.</li></ul><strong>Stakeholder Collaboration</strong><br><ul><li>Work closely with Supply Chain, Procurement, and Stores teams to ensure material availability.</li><li>Liaise with Sales and Project Management teams to understand customer requirements and delivery commitments.</li><li>Provide regular production performance reporting, highlighting risks, opportunities, and corrective actions.</li></ul><br><br><ul><li>Bachelor's Degree in Mechanical Engineering, Automotive Engineering, Manufacturing Engineering, or a related discipline.</li><li>Minimum 7 years of production or manufacturing engineering experience.</li><li>At least 3 years in a lead or senior role managing teams of six or more employees.</li><li>Demonstrable track record of delivering measurable production improvements.</li><li>Strong practical knowledge of vehicle manufacturing, fabrication, metalwork, bodybuilding, or heavy engineering manufacturing.</li><li>Proven expertise in Agile, Lean, or Continuous Improvement methodologies.</li><li>Solid knowledge of HSE regulations and safety management within a manufacturing environment.</li><li>Strong leadership, coaching, and people management skills.</li><li>Data-driven approach with proficiency in production reporting and KPI management.</li><li>Fluency in English, both written and spoken.</li><li>Experience in emergency vehicles, specialist vehicles, or similar manufacturing environments will be an advantage.</li><li>Lean or Six Sigma certification will be an advantage.</li><li>Familiarity with UAE health and safety regulations and GCC experience will be an advantage.</li><li>Experience with ERP or MRP systems in a production environment will be an advantage.</li><li>Proficiency in Arabic and/or Hindi will be an advantage.</li></ul><br><br><em>Please visit our </em><strong><em>jobs</em></strong><em> page to check out our current list of jobs in UAE and across the world.</em><br><em>Follow us on </em><strong><em>LinkedIn</em></strong><em> and </em><strong><em>Facebook</em></strong><em> to stay updated regarding our upcoming opportunities.</em><br><em>Subscribe to our </em><strong><em>LinkedIn newsletter</em></strong><em> for weekly job updates.</em><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Production Engineer</b>. Our client is a reputed organization in the Truck Body Manufacturing sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Plan and supervise truck and pickup body manufacturing activities.<br></li><li>Monitor production schedules to ensure timely completion.<br></li><li>Maintain quality standards throughout fabrication and assembly.<br></li><li>Coordinate with production, design, and quality teams.<br></li><li>Optimize manufacturing processes to improve productivity.<br></li><li>Ensure compliance with safety and operational procedures.<br></li><li>Resolve production issues and implement corrective actions.<br></li><li>Train and guide production staff on best manufacturing practices.<br></li></ul>Required Skills<br><ul><li>Truck body manufacturing expertise.<br></li><li>Pickup body fabrication experience.<br></li><li>Production planning and scheduling.<br></li><li>Quality assurance and inspection.<br></li><li>Manufacturing process optimization.<br></li></ul>Preferred Skills<br><ul><li>GCC manufacturing experience.<br></li><li>Lean manufacturing knowledge.<br></li><li>Leadership and team coordination.<br></li></ul>Work Experience Requirements<br><p>Minimum <b>6+ years</b> of experience in Truck or Pickup Body Manufacturing is required. GCC manufacturing experience is preferred. Candidates should have strong exposure to fabrication, production planning, and manufacturing operations.<br></p><br>Education<br><ul><li><b>Minimum:</b> Typical – B.E./B.Tech in Mechanical Engineering or Production Engineering<br></li><li><b>Preferred:</b> Postgraduate qualification in Manufacturing/Industrial Engineering<br></li><li><b>Additional:</b> Relevant production or quality certifications<br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Overview<p>We are seeking an experienced Production Engineer to manage and coordinate the manufacturing, assembly and conversion of ambulances, mobile clinics and other special-purpose vehicles. Reporting to the Production Manager, the role will ensure that engineering designs and Bills of Quantities (BOQs) are translated into safe, efficient and high-quality production processes.</p><br><br>Key Responsibilities<ul><li><p>Plan, coordinate and monitor vehicle manufacturing, assembly and conversion activities.</p><br><br></li><li><p>Translate approved drawings, specifications and BOQs into production plans and workflows.</p><br><br></li><li><p>Oversee vehicle body modifications and the integration of mechanical, electrical and medical systems.</p><br><br></li><li><p>Allocate work, monitor production schedules and ensure timely completion of projects.</p><br><br></li><li><p>Coordinate with design, procurement, assembly and quality teams to resolve technical and production issues.</p><br><br></li><li><p>Ensure materials, components and equipment meet approved specifications.</p><br><br></li><li><p>Identify production bottlenecks and implement process improvements.</p><br><br></li><li><p>Conduct production inspections and maintain accurate technical and progress records.</p><br><br></li><li><p>Ensure compliance with applicable automotive, ambulance, quality and occupational safety standards.</p><br><br></li><li><p>Support testing, final inspection and handover of completed vehicles.</p><br><br></li></ul>Qualifications and Experience<ul><li><p>Bachelor’s degree in Production, Mechanical, Automotive, Mechatronics or a related engineering discipline.</p><br><br></li><li><p>Relevant experience in ambulance, automotive, commercial vehicle or special-purpose vehicle manufacturing.</p><br><br></li><li><p>Practical knowledge of vehicle body fabrication, assembly, electrical integration and mechanical systems.</p><br><br></li><li><p>Ability to interpret engineering drawings, technical specifications and BOQs.</p><br><br></li><li><p>Strong production planning, problem-solving and team coordination skills.</p><br><br></li><li><p>Good understanding of quality control and workplace safety requirements.<br></p><br><br></li></ul><br><br> <br><br> </div>

<ul><li>Verify incoming material against MRQ, LPO, and purchase specifications/information.</li><li>Maintain traceability of accepted materials with unique identification numbers, documented in the material traceability sheet as per project requirements.</li><li>Ensure applicable WPS is available on the shop floor; coordinate with the production engineer/welding supervisor to conduct welder awareness training as required.</li><li>Carry out stage-wise inspections throughout fabrication processes, following ITP/QCP and signing off as applicable.</li><li>Organize and coordinate Destructive and Non-Destructive Testing.</li><li>Perform inspections of blasting and painting activities when required.</li><li>Assist QCE in preparing inspection and test packages and final documentation.</li><li>Support QCE/Welding Engineer in qualifying WPS, PQR, and WPQR; maintain relevant records.</li><li>Coordinate with customer representatives, third-party inspectors, and class surveyors for quality-related requirements.</li><li>Ensure work is carried out safely and effectively in compliance with HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Description:</strong> Minimum 5 years of experience in QA/QC within welding and fabrication projects, preferably in oil & gas or heavy fabrication industries. Strong knowledge of WPS, PQR, WPQR, and related inspection techniques.<br/> <strong>Education:</strong> Diploma or Degree in Mechanical Engineering or a related discipline.<br/> <strong>Certification(s)/Training(s):</strong> CSWIP 3.1, AWS-CWI, or equivalent is preferred. NDT Level II in RT, UT, MT, and PT is desirable.<br/> <strong>Computer Skill(s):</strong> Proficient in MS Office and familiar with inspection reporting software.<br/> <strong>Equipment Knowledge:</strong> Welding inspection tools, NDT equipment, and coating inspection instruments</p>

<p>Technopole Industries L.L.C. is seeking an experienced Production Engineer to lead daily machine shop operations for street lighting pole fabrication. This is a hands-on supervisory role responsible for output, dimensional accuracy, and team discipline on the shop floor.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Plan, coordinate, and supervise machine shop operations: plasma cutting, laser cutting, taper cutting, plate bending, and seam welding.</p></li><li><p>Meet daily/weekly output targets aligned to production schedules and delivery commitments.</p></li><li><p>Interpret fabrication drawings, cut sheets, and dimensional specs across pole profiles.</p></li><li><p>Monitor MS plate/coil material utilization, minimize scrap, and maintain consumption logs.</p></li><li><p>Coordinate with Production Planning, QC, Procurement, and Assembly for workflow continuity.</p></li><li><p>Supervise setup, operation, and basic maintenance of machines.</p></li><li><p>Verify dimensional accuracy during different stages of production</p></li><li><p>Prepare daily production reports, machine utilization logs, and shift handover notes.</p></li><li><p>Optimize job sequencing and machine loading to eliminate idle time and maximize throughput per shift.</p></li><li><p>Enforce HSE standards, safe work practices, and PPE compliance.</p></li><li><p>Drive process improvements to reduce cycle time per pole and improve first-pass dimensional acceptance rate.</p></li></ul><p><strong>Required Qualifications:</strong></p><ul><li><p>Bachelor’s degree in mechanical/production/industrial engineering.</p></li><li><p>Minimum 2-5 years' experience in production operations within structural steel/pole/pipe fabrication or similar heavy fabrication industry.</p></li></ul><p><strong>Required Skills & Competencies:</strong></p><ul><li><p>Strong understanding of MS plate properties, bending allowances, and forming tolerances for structural pole profiles.</p></li><li><p>Ability to read and interpret fabrication drawings, cut plans, and dimensional tolerances.</p></li><li><p>Machine operation and basic troubleshooting competency.</p></li><li><p>Production planning experience</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Experience in Production, Production Planning.</p></li><li><p>Experience in steel fabrication is an advantage</p></li></ul>

<p>Technopole Industries L.L.C. is seeking an experienced Production Engineer to lead daily machine shop operations for street lighting pole fabrication. This is a hands-on supervisory role responsible for output, dimensional accuracy, and team discipline on the shop floor.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Plan, coordinate, and supervise machine shop operations: plasma cutting, laser cutting, taper cutting, plate bending, and seam welding.</p></li><li><p>Meet daily/weekly output targets aligned to production schedules and delivery commitments.</p></li><li><p>Interpret fabrication drawings, cut sheets, and dimensional specs across pole profiles.</p></li><li><p>Monitor MS plate/coil material utilization, minimize scrap, and maintain consumption logs.</p></li><li><p>Coordinate with Production Planning, QC, Procurement, and Assembly for workflow continuity.</p></li><li><p>Supervise setup, operation, and basic maintenance of machines.</p></li><li><p>Verify dimensional accuracy during different stages of production</p></li><li><p>Prepare daily production reports, machine utilization logs, and shift handover notes.</p></li><li><p>Optimize job sequencing and machine loading to eliminate idle time and maximize throughput per shift.</p></li><li><p>Enforce HSE standards, safe work practices, and PPE compliance.</p></li><li><p>Drive process improvements to reduce cycle time per pole and improve first-pass dimensional acceptance rate.</p></li></ul><p><strong>Required Qualifications:</strong></p><ul><li><p>Bachelor’s degree in mechanical/production/industrial engineering.</p></li><li><p>Minimum 2-5 years' experience in production operations within structural steel/pole/pipe fabrication or similar heavy fabrication industry.</p></li></ul><p><strong>Required Skills & Competencies:</strong></p><ul><li><p>Strong understanding of MS plate properties, bending allowances, and forming tolerances for structural pole profiles.</p></li><li><p>Ability to read and interpret fabrication drawings, cut plans, and dimensional tolerances.</p></li><li><p>Machine operation and basic troubleshooting competency.</p></li><li><p>Production planning experience</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Solid work knowledge is an advantage</p>

<ul><li><p>Able to start up a new set up for the fabrication of pressure vessels for Oil & Gas industry with all the operational and administrative requirements in Dubai, UAE.</p></li><li><p>Capable of setting up the unit from construction stage to installation of</p><p>machineries, and running of facilities.</p></li><li><p>Responsible for the management, execution and delivery of construction and fabrication</p><p>projects.</p></li><li><p>Responsible to the General Manager for overall construction progress, productivity, labor</p><p>utilization, quality, production methods, safety coordination and execution.</p></li><li><p>Provide direction, leadership and guidance to the team in respect of: health & safety,</p><p>environmental guidelines; quality methods and procedures. Productivity cost & schedule Continuous Improvement, Resource utilization.</p></li><li><p>Responsible for enacting proper fabrication techniques as well as working with the</p><p>Project Planner/Production Engineer to develop detailed production schedules and then</p><p>executing the construction operations to meet the detailed schedules and overall project</p><p>plan. Instruct construction/fabrication personnel and track the progress of construction</p><p>operations such as the arrival and utilization of materials, supplies, tools, machinery,</p><p>equipment, and vehicles.</p></li><li><p>Review engineering and architectural drawings and specifications frequently as well as</p><p>consult with design professionals to ensure that progress is made in harmony with the</p><p>outlined plans and specs. Collaborate with cost estimators to ensure that expenses are</p><p>recorded properly and monitor the costs of the project so that the project does not go over</p><p>the budget.</p></li><li><p>Should obtain ASME certification for the unit, secure permits and licenses for projects as</p><p>well as ensure the fabrication/construction projects meet safety codes and regulations.</p></li><li><p>Review monthly plans to ensure they are realistic & meet project needs.</p></li><li><p>Review all Production Progress & Productivity reports</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>12-15 years of experience in Project management/Construction</p></li></ul><p>Management/Production management in Pressure Vessel, piping, fabrication related</p><p>to Oil & gas industry.</p><ul><li><p>The ideal candidate should have a degree in a relevant discipline and preferably Post</p></li></ul><p>Graduate or MBA Graduate, have managerial experience from a service company,</p><p>preferably with ASME Pressure vessel and associated components, and is able to use</p><p>a combination of technical and leadership skills to focus the teams and deliver both</p><p>professional sales and quality service to our customers.</p><ul><li><p>Bachelor degree in Mechanical, Electrical, or Instrumentation engineering.</p></li><li><p>12+ years of experience in the fabrication of Pressure vessels for Oil & Gas EPC</p></li></ul><p>projects, with at least 5 Years of managerial experience in managing a team of white</p><p>and blue collar employees.</p><ul><li><p>Capable of handling projects in Oil & Gas, petrochemical plants, industrial projects</p></li></ul><p>etc.</p><ul><li><p>Ability to review and interpret designs, drawings & specifications.</p></li><li><p>Hands on experience at managerial level Oil & Gas piping including carbon steel and</p></li></ul><p>stainless steel piping, tankage works and structural works (fabrication and erection).</p><ul><li><p>Knowledge of oil and gas and tank and terminal construction challenges including</p></li></ul><p>those associated with costs and scheduling.</p><ul><li><p>Good understanding of electrical and instrumentation.</p></li><li><p>Knowledge of ASME codes / QA/QC procedures.</p></li><li><p>Experienced in resource control, commercial and contract management, and general</p></li></ul><p>management.</p><ul><li><p>Strong management & leadership skills to lead all aspects of the construction process</p></li></ul><p>& be able to work collaboratively with all involved.</p>

1. Job Purpose\n\nResponsible for a safe, economical and trouble free operation and safe emergency handling of the production facilities by providing effective leadership and coordination among the Production Units and other Departments. Also responsible for implementation of the company HSE policy and Companys Oil/Gas production, Processing and Water Injection targets.\n\n\n\n2. Principal Accountabilities\n\na)\tSafety\n•\tEnsure Compliance of Safe Operations at the Production Facilities\n•\tCarries out safety audit of the plant on weekly basis for any unsafe situation. Conducts regular safety meetings with subordinates\n•\tEnsures that latest versions of all required operating procedures, check list and manuals are available in LCR and all previous versions are removed. \n•\tResponsible for implementation and maintenance of work permit system during his job rotation\n•\tEnsure use of personnel protective in the processing facilities. Ensures regular inspection and checks through routine checks schedule.\n•\tMaintains good housekeeping standard and follows ADMA OPCO Health, Safety and Environmental Policies\t\n•\tNotifies the details of all safety incidents on the Production facility to the Production Team Leader\n•\tEnsure implementation of corrective actions and recommendations of safety.\n\nb)\tNormal Operation\n•\tResponsible for attaining safe and trouble free operations of the crude production from well head towers including crude oil production / separation, water injection and gas treatment / processing to meet the daily production targets. \n•\tEnsures operating parameters remain within specified ranges during normal and emergency operation and there is no violation of equipment design limits.\n•\tResponsible for the preparation of wellhead towers for drilling, work over, maintenance activities and co-ordinates safe handover to drilling and maintenance. Issues required handover certificates and accepts personally such facilities after the completion of such activities.\n•\tCoordinates with Mechanical and I/E departments for routine, preventive and urgent maintenance of equipment\n•\tIssues Hot / Cold and Entry Work Permits for all Routine / Planned Maintenance work to be carried out in Accordance with ADMA Working Procedures and Safety Regulations \t\t\n•\tResponsible for utilizing Maximo for all maintenance jobs in his group.\n•\tEnsures that all log sheets and checklists are being filled as per schedule and are duly signed by respective field operators.\n•\tRepresents ADMA OPCO onboard of test vessels, supervises flow testing, cleans - up unloading and bleed down operations in safe manner and carries out self-auditing and planned inspection to ensure compliance of test vessels and contracted equipment with the company’s safety and marine regulations.\t\t\n•\tResponsible for the supervision of Water Injection Plant Operation and Preparation for Maintenance. Monitors Chemical Injection Systems and carries out some Lab Tests to ensure required Water Quality and Quantity is achieved.\t\t\t\t\t\t\n•\tResponsible for the Operation of Gas Separation / Treatment Plants and preparation of these Plants for Maintenance Activities. Ensures and maintains the quality of products and ensures the integrity of Plant Machinery and equipment.\t\t\t\t\t\t\t\n•\tOperates Control Room Facilities and the Monitoring of Field and Plant Activities. Must be able to understand and operate all Control Room Visual and Annunciation Alarms and Signals and be able to spot any malfunctions in operating facilities, initiate corrective actions when required.\t\n•\tParticipation in case of Emergency Drills and Emergency Procedures initiating General Alarms and the operation of various communication systems.\t\t\t\t\t\t\n•\tCarries out a self inspection and self auditing surveys, conducts regular safety meetings with subordinates, prepares inspection lists and supervises the classification of plant equipment from hazard and risk assessment point of view and follows up inspection programmes.\t\t\n•\tMaintains adequate level of spares and consumables to avoid field and plant unplanned shutdown and failures.\t\t\t\t\t\t\t\t\t\t\n•\tIdentifies any Training Requirements, follow up on Job Training of all subordinates with emphasis upon the development of UAE Nationals.\n\nOther Related Duties :- As assigned by Senior Production Engineer such as : \n•\tWriting Reports, responding to alarms and signals to spot any malfunction in operating facilities\n•\tEnsuring adequate supplies of chemicals, spares, consumable’s and stores stock\n•\tTraining subordinates, following up Progress of UAE National Developees, Training etc. \n•\tAssisting Supervisor in the training of Subordinates / developees. (ii) Preparing accident/incident reports. (iii) Maintaining proper housekeeping etc.\n

The Production Manager is responsible for the overall management, supervision, and performance of the Production Department, including production operations, manpower management, facility maintenance, and air-conditioning (A/C) maintenance activities. The role is responsible for ensuring production targets are achieved in line with the annual budget while maintaining product quality, operational efficiency, equipment reliability, cost control, and workplace safety.<br>Key Responsibilities:Manage and supervise overall production operations, production plants, manpower, and daily activities. Plan and achieve production targets in line with the annual budget and sales requirements. Ensure finished products meet required quality standards. Manage production machinery, fleet, facility, and A/C maintenance activities. Plan and monitor preventive maintenance and coordinate breakdown repairs with the Workshop. Ensure optimum machinery performance and minimize production downtime. Coordinate with Sales, Crusher, Purchase, Stores, and Workshop for smooth operations. Forecast and arrange required spare parts and maintenance materials. Prepare production and maintenance reports and provide regular updates to the General Manager. Prepare and monitor the annual Production Department budget. Monitor the performance and duties of Production Engineers, Supervisors, and Operators. Ensure all production and maintenance activities comply with company safety procedures. Drive productivity, cost efficiency, equipment reliability, and continuous improvement. Requirements:Degree/Diploma in Mechanical, Production, Industrial Engineering, or related field.5+ experience in production/plant management. Strong knowledge of production machinery and maintenance. Good leadership, planning, coordination, and problem-solving skills. Ability to manage manpower, budgets, production targets, and maintenance activities<br>You may also register your profile through our website and apply here:https://nadia-me.com/job/details/637

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary: <br> <p>The Production Manager is responsible for the overall management, supervision, and performance of the Production Department, including production operations, manpower management, facility maintenance, and air-conditioning (A/C) maintenance activities. The role is responsible for ensuring production targets are achieved in line with the annual budget while maintaining product quality, operational efficiency, equipment reliability, cost control, and workplace safety.</p><br><br> Key Responsibilities: <br> <ul> <li><ul><li>Manage and supervise overall production operations, production plants, manpower, and daily activities.</li><li>Plan and achieve production targets in line with the annual budget and sales requirements.</li><li>Ensure finished products meet required quality standards.</li><li>Manage production machinery, fleet, facility, and A/C maintenance activities.</li><li>Plan and monitor preventive maintenance and coordinate breakdown repairs with the Workshop.</li><li>Ensure optimum machinery performance and minimize production downtime.</li><li>Coordinate with Sales, Crusher, Purchase, Stores, and Workshop for smooth operations.</li><li>Forecast and arrange required spare parts and maintenance materials.</li><li>Prepare production and maintenance reports and provide regular updates to the General Manager.</li><li>Prepare and monitor the annual Production Department budget.</li><li>Monitor the performance and duties of Production Engineers, Supervisors, and Operators.</li><li>Ensure all production and maintenance activities comply with company safety procedures.</li><li>Drive productivity, cost efficiency, equipment reliability, and continuous improvement.</li></ul></li> </ul> <br> Requirements: <br> <ul> <li><ul><li>Degree/Diploma in Mechanical, Production, Industrial Engineering, or related field.</li><li>5+ experience in production/plant management.</li><li>Strong knowledge of production machinery and maintenance.</li><li>Good leadership, planning, coordination, and problem-solving skills.</li><li>Ability to manage manpower, budgets, production targets, and maintenance activities.</li></ul></li> </ul> <br> <br><br> </div>

Role Description We are seeking a highly analytical, innovative, and results-oriented Petroleum Engineer to support the exploration, evaluation, development, and production of oil and gas resources. The successful candidate will be responsible for optimizing reservoir performance, designing drilling and production strategies, improving hydrocarbon recovery, and ensuring safe, efficient, and environmentally responsible operations. This role collaborates closely with geologists, geophysicists, drilling engineers, production engineers, reservoir engineers, HSE professionals, and operations teams to maximize asset value and support sustainable energy development. Key responsibilities include evaluating oil and gas reservoirs to estimate reserves, forecast production, and identify opportunities for enhanced recovery; developing drilling, completion, and production strategies that optimize operational efficiency and hydrocarbon recovery; performing reservoir simulation, production forecasting, decline curve analysis, and economic evaluations to support field development planning; collaborating with multidisciplinary teams to design well programs, optimize well placement, and improve production performance; monitoring well performance, production data, pressure behavior, and reservoir characteristics to recommend operational improvements; supporting drilling operations by providing engineering analysis, well design recommendations, and technical guidance; evaluating artificial lift systems, stimulation techniques, enhanced oil recovery (EOR) methods, and production optimization technologies; conducting technical and economic feasibility studies for field development projects, workovers, and production enhancement initiatives; ensuring compliance with industry regulations, health, safety, environmental (HSE) standards, and corporate policies; preparing engineering reports, technical documentation, production analyses, and presentations for management and project stakeholders; utilizing reservoir management software, production optimization tools, and engineering applications to improve decision-making; participating in risk assessments, incident investigations, and continuous improvement initiatives; supporting digital transformation projects involving data analytics, automation, artificial intelligence, and predictive maintenance; and staying informed about emerging technologies, sustainability initiatives, carbon management practices, and advancements in the energy industry. The Petroleum Engineer is expected to combine strong engineering expertise with analytical thinking and commercial awareness to maximize resource recovery while maintaining operational safety, environmental stewardship, and economic performance. Success in this role requires excellent problem-solving skills, technical communication, collaboration, and the ability to manage complex engineering challenges in dynamic operational environments. Qualifications Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, Energy Engineering, or a related engineering discipline. Strong understanding of reservoir engineering, drilling engineering, production engineering, well completion, and field development principles. Knowledge of reservoir simulation, production optimization, pressure transient analysis, enhanced oil recovery (EOR), and artificial lift systems. Familiarity with industry software such as Petrel, Eclipse, CMG, OFM, Techlog, Prosper, GAP, Pipesim, Landmark, Kingdom, or similar petroleum engineering applications. Understanding of drilling operations, well integrity, production systems, surface facilities, and hydrocarbon processing. Knowledge of health, safety, environmental (HSE) regulations, risk management, and industry standards applicable to upstream oil and gas operations. Proficiency in engineering analysis, numerical modeling, data interpretation, and technical reporting. Strong analytical, quantitative, and problem-solving skills with the ability to evaluate complex engineering and operational data. Excellent written, verbal, and presentation communication skills. Ability to collaborate effectively with multidisciplinary technical teams and external stakeholders. Proficiency in Microsoft Office, engineering software, and data visualization tools. Familiarity with digital oilfield technologies, automation, artificial intelligence, machine learning, and predictive analytics in energy operations is advantageous. Professional registration or membership with recognized engineering institutions and certifications related to petroleum engineering, reservoir management, drilling, production optimization, or project management are considered advantageous but are not mandatory. Demonstrated commitment to continuous learning and staying informed about evolving energy technologies, carbon capture and storage (CCS), sustainability initiatives, digital transformation, reservoir management techniques, and industry best practices.

<ul><li><p>Plan and execute structural, piping, and welding fabrication activities based on project requirements and production schedules.</p></li><li><p>Allocate work to Foremen and Leadmen, ensuring effective supervision and timely completion of assigned tasks.</p></li><li><p>Coordinate with Planners and Production Engineers to obtain allocated man-hours and ensure fabrication activities achieve planned productivity targets.</p></li><li><p>Monitor fabrication progress and escalate productivity or resource constraints to Production Management for timely resolution.</p></li><li><p>Optimize manpower, materials, equipment, and workshop resources to maximize operational efficiency and meet project schedules.</p></li><li><p>Coordinate with Engineering and Project teams to resolve design issues, technical queries, and fabrication challenges.</p></li><li><p>Prepare and maintain daily production progress reports for project review meetings.</p></li><li><p>Coordinate with supervisors from other disciplines to resolve interface issues and ensure smooth execution of fabrication activities.</p></li><li><p>Ensure all fabrication work complies with approved drawings, specifications, work instructions, welding procedures, and quality standards.</p></li><li><p>Safeguard company personnel, equipment, materials, and assets within the fabrication yard and project sites.</p></li><li><p>Participate in accident and incident investigations and ensure corrective actions are implemented effectively.</p></li><li><p>Conduct toolbox talks, promote good housekeeping, and maintain a safe working environment in accordance with company QHSE requirements.</p></li><li><p>Monitor and evaluate the performance and productivity of Foremen and Leadmen, providing guidance and coaching to improve operational performance.</p></li><li><p>Recommend improvements to machinery, tools, equipment, and fabrication processes to enhance productivity and efficiency.</p></li><li><p>Perform additional responsibilities assigned by the Fabrication Superintendent or Management to support successful project delivery.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Education:</strong> Matric with ITI, Diploma, or Degree in Engineering (Mechanical or related discipline preferred). </p></li><li><p><strong>Experience:</strong> Minimum 5 years of relevant supervisory experience in structural fabrication, piping fabrication, and welding within Oil & Gas, EPC, heavy fabrication, marine, or shipyard industries. <strong>Technical Qualification:</strong> ITI, Diploma, or Engineering qualification with sound knowledge of fabrication processes, welding practices, engineering drawings, and production planning. </p></li><li><p><strong>Skills:</strong> Strong leadership, manpower management, planning, coordination, communication, problem-solving, and team management skills. </p></li><li><p><strong>Software:</strong> Proficient in MS Office. Knowledge: Good understanding of structural steel fabrication, piping fabrication, welding procedures, fabrication sequencing, productivity monitoring, engineering drawings, quality requirements, and QHSE standards.</p></li></ul>

Role Description We are seeking a technically skilled, analytical, and safety-focused Petroleum Engineer to support the exploration, development, production, optimization, and management of oil and gas resources. The successful candidate will apply engineering principles, geological data, reservoir information, production technologies, and advanced analytical methods to improve hydrocarbon recovery, operational efficiency, asset performance, and resource utilization. Key responsibilities include evaluating reservoir and production data to support field development and optimization strategies; analyzing well performance, pressure behavior, fluid properties, production trends, and reservoir characteristics; supporting drilling, completion, stimulation, workover, and well intervention activities; developing and evaluating well designs, production strategies, artificial lift systems, completion methods, and reservoir management plans; conducting production forecasting, decline curve analysis, material balance calculations, nodal analysis, and performance evaluations; monitoring production rates, pressure data, water and gas cuts, and other operational parameters to identify optimization opportunities; collaborating with geologists, geophysicists, drilling engineers, completion engineers, production engineers, reservoir engineers, facility engineers, and operations teams to develop integrated field solutions; evaluating enhanced oil recovery (EOR), secondary recovery, water injection, gas injection, hydraulic fracturing, stimulation, and other recovery technologies; supporting well integrity, flow assurance, pressure management, and production surveillance activities; analyzing operational risks and recommending engineering solutions that improve reliability, safety, environmental performance, and production efficiency; developing technical reports, engineering studies, production forecasts, field development plans, and performance presentations; evaluating equipment, technologies, contractors, and service solutions related to petroleum operations; using reservoir simulation, production modeling, data analytics, digital oilfield technologies, and artificial intelligence to improve decision-making and asset performance; supporting economic evaluations, capital planning, project assessments, and resource development decisions; ensuring engineering activities comply with applicable health, safety, environmental, regulatory, and industry requirements; supporting operational troubleshooting and root-cause analysis for production and well performance issues; and staying informed about emerging petroleum technologies, digital oilfield solutions, carbon management, energy transition technologies, and modern hydrocarbon recovery practices. The Petroleum Engineer is expected to combine strong engineering knowledge with analytical thinking, technical judgment, and a commitment to operational safety and efficiency. Success in this role requires problem-solving abilities, teamwork, communication, attention to detail, adaptability, and a continuous focus on optimizing resource recovery and asset performance. Qualifications Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline. Strong understanding of petroleum engineering principles, reservoir behavior, drilling, well completion, production operations, artificial lift, and hydrocarbon recovery. Knowledge of reservoir engineering concepts including pressure analysis, material balance, fluid properties, reservoir simulation, reserves estimation, and production forecasting. Familiarity with drilling and completion operations, well design, stimulation, hydraulic fracturing, workover activities, and well intervention technologies. Understanding of production engineering concepts including nodal analysis, artificial lift, well performance optimization, flow assurance, and production surveillance. Familiarity with petroleum engineering software and analytical platforms such as Petrel, Eclipse, PIPESIM, PROSPER, GAP, OFM, CMG, Well Flo, or equivalent technologies. Strong data analysis capabilities with knowledge of production databases, engineering modeling, statistical analysis, and technical reporting. Understanding of enhanced oil recovery (EOR), water flooding, gas injection, secondary and tertiary recovery methods is advantageous. Knowledge of well integrity, pressure control, flow assurance, corrosion management, and production optimization is beneficial. Strong analytical, numerical, troubleshooting, and problem-solving skills. Excellent written, verbal, technical presentation, and interpersonal communication skills. Ability to collaborate effectively with multidisciplinary teams including geology, geophysics, drilling, completions, facilities, operations, and HSE professionals. Strong understanding of health, safety, environmental, regulatory, and risk management principles within petroleum operations. Knowledge of digital oilfield technologies, industrial automation, IoT, machine learning, artificial intelligence, predictive analytics, and real-time production monitoring is advantageous. Familiarity with energy transition technologies such as carbon capture and storage (CCS), hydrogen, geothermal energy, emissions monitoring, and low-carbon operations is beneficial. Strong organizational skills with the ability to manage multiple engineering studies, projects, operational priorities, and technical deliverables. High level of professionalism, technical integrity, safety awareness, attention to detail, and commitment to operational excellence. Professional certifications or memberships with recognized engineering or petroleum organizations are considered advantageous but are not mandatory. Demonstrated commitment to continuous learning and staying informed about petroleum technologies, reservoir management, drilling innovations, digital oilfield solutions, energy markets, environmental developments, and global energy industry practices.