Production Technician Jobs

<p>A leading construction company in Dubai is seeking skilled and hardworking Pipe Fitters to support ongoing construction and MEP projects.<br /> Key Responsibilities<br /> Install, assemble, and maintain piping systems<br /> Read and understand basic piping drawings and layouts<br /> Measure, cut, align, and fit pipes accurately<br /> Assist with pipe supports, valves, and fittings<br /> Inspect completed pipe installations<br /> Follow site safety procedures and PPE requirements<br /> Coordinate with plumbers, welders, and MEP teams<br /> Applicants may send cv via WhatsApp number 05222435435</p>

Job Description<br><br> JOB DESCRIPTION <br><br>Provide service-related assistance by way of phone support. Attend field breakdowns and repair crane in a timely manner. Maintain service reports and submit these in a timely manner upon completion of repair. Provide feedback on component failure. Train distributors in the commissioning of the first new product. Analyse and troubleshoot warranty problems when beyond the scope of the distributor or customer. Interact with MCG based personnel on matters pertaining to service materials, product requirements, availability, and code compliance. Plans & coordinates activities concerned with investigating and resolving customer reports of technical problems by utilizing applicable processes to eliminate future operational or service difficulties. Analyses reports of technical problems to determine trends affecting future design, production, service, and maintenance processes and recommends modifications to eliminate future problems. Perform other ad-hoc duties as assigned. <br><br>Job Requirement<br><br>High School with 5 years or greater of technical service & support related working experience preferably in the crane industry or heavy equipment industry. OEM or dealer experience in heavy equipment/Crane background is advantageous. Specialist training in the crane industry or on Manitowoc Cranes is advantageous. Trade certificate in either Mechanical or Electrical trades, with a high level of automotive and Canbus electrical diagnostic skills. Fault finding and diagnostic skills in Electrical, hydraulic, engine, drive-line, braking and general maintenance and repairs in Heavy equipment or LBCC and Mobile Cranes. Ability to read and work with electronic and hydraulic schematics.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><strong>About the Company <br>ADNOC is one of the world's leading energy producers, and a primary catalyst for the growth and diversification of the United Arab Emirates.&nbsp;Our diverse family of more than 50,000 employees is made up of over 100 different nationalities. People from different backgrounds, with unique perspectives and wide-ranging skillsets, who share a collective responsibility: to enable and accelerate progress, both here in the UAE and across the globe. Here at ADNOC, we go beyond business as usual. We do things differently, challenge convention, and embrace new ways of thinking. This is what defines and differentiates us. By working together every day, we’re bringing energy to life.<br>Job Purpose:</strong></p><br><p>Implements and executes the operational instructions and Oil Spill Response (OSR) / Hazmat emergency response plans in order to enable the delivery of seamless emergency response with minimal human, environmental and financial impact.</p><br><p><strong>Key Accountabilities:</strong></p><br><p><strong>&nbsp;Job Specific Accountabilities</strong></p><br><p>&nbsp;• Ensure anti-pollution equipment is deployed correctly including the use of anti-pollution oil dispersant sprayers and chemicals as appropriate.</p><br><p>• Follows and applies the procedures and work practices to meet site waste management plans and obligations.</p><br><p>• Selects oil spill response equipment according to supervisor’s instructions.</p><br><p>• Do the pre-operational checks of equipment by using manufacturer’s specifications and standard operating procedures (SOPs).</p><br><p><strong>Qualifications, Experience, Knowledge &amp; Skills:</strong></p><br><p><strong>Minimum Qualification</strong></p><br><p>• Secondary School Certificate with a vocational trade certificate in the relevant field. Minimum</p><br><p><strong>Experience &amp; Knowledge &amp; Skills</strong></p><br><p>• 0-3 years of experience in a crisis and emergency-related field, preferably in a similar industry</p><br><br> </div>

<p>ᴧ Strong knowledge of checking and troubleshooting of Form Filling Sealing Machine, Bottle Filling Machine, Roasting / Frying Machine, Processing machine (De stoner & Gravity separator cleaning Machine, Grinding machine, Blending machine, continuous chocolate Tampering Machine) by using the correct procedures based on the Manuals provided for each machine to eliminate break down. ᴧ Reading Blueprints, Electrical Drawings and Control Diagrams to assist and plan for trouble shooting. ᴧ Perform fault analysis of Electrical & Electronics components such as transformers, controls, PCB, Motor, sensor, contractor, and circuit breakers. ᴧ Basic Knowledge of PLC, Drives, Servo Motor, Vfd Etc. ᴧ Checking, operating and troubleshooting of Machine accessories Thermal Printer, Ink jet Printer, Check weigher, Fire Pumps and screw air compressor etc.. ᴧ Preparing requisition for Electrical Spares and Consumables for repairing and maintenance works. ᴧ selecting appropriate replacement parts and troubleshooting problems by using the correct procedures. ᴧ Understands and follows all plant safety, work, ᴧ Daily routine works of Preventive and break down maintenance Daily update of break down register and report </p><p><strong>Desired Candidate Profile</strong></p><p>ᴧ Education: Diploma in Electrical and Mechanical engineering</p><p>ᴧ Experience: 2 Years in same field, Strong knowledge & experience of troubleshooting in FMCG Plant Machines - (Food Packing machine, Food Processing machine & Food Filling lines) by using the correct procedures based on the Manuals provided for each machine to eliminate break down.</p><p>ᴧ Language: English / Hindi.</p><p>ᴧ Skills: Computer: perfect knowledge windows & MS office</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Closing date: &nbsp;<br> Number of positions: 1<br> Recruiter name:&nbsp;Reem Mansoor&nbsp;<br> Reference number: 71914&nbsp;<br> Workplace Type:&nbsp;</p><br> <p>Mediclinic Airport Road Hospital&nbsp;| Abu Dhabi | United Arab Emirates</p><br> <b>MAIN PURPOSE OF JOB</b> <br><p>To safeguard uninterrupted hospital operations and patient safety by expertly installing, repairing, and maintaining all plumbing, water-supply, and drainage systems. The role applies advanced pipefitting knowledge, accurate interpretation of technical plans, and skilled use of hand, power, and woodworking tools to measure, cut, and assemble components. Rapid diagnostics and problem-solving ensure timely resolution of system faults and sustained compliance with facility standards.</p><br> <br><br><b>KEY RESPONSIBILITY AREAS</b> <br><ol> <li><span><span>Ability to install, repair, and maintain plumbing systems and fixtures</span></span></li> <li><span><span>Knowledge of water supply systems, drainage systems, and pipefitting</span></span></li> <li><span><span>Proficient in reading plans and technical diagrams</span></span></li> <li><span><span>Use of hand and power tools</span></span></li> <li><span><span>Problem-solving and diagnostic skills</span></span></li> <li><span><span>knowledge in measuring, cutting, and assembling materials</span></span></li> <li><span><span>Knowledge in using woodworking tools and machinery</span></span></li> </ol> <br><br><b>REQUIRED EDUCATION</b> <br><p>A relevant technical diploma or trade certificate from an internationally accredited institution</p><br> <br><br><b>REQUIRED EXPERIENCE</b> <br><p>At least 2 years' relevant experience preferably in a healthcare setting</p><br> <br><br><b>REQUIRED JOB SKILLS AND KNOWLEDGE</b> <br><ul><li>Building management systems and lighting control systems </li><li>Knowledge of current wiring regulations </li><li>Relevant JCIA and other related governance and regulatory standards </li></ul><br><br><p>All applicants will be considered, with the understanding that preference will be given to the designated groups in accordance with the United Arab Emirates Emiratization Program. If you wish to grow with us, apply now and become a part of the Mediclinic Middle East Family</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities</strong></p><ul><li><p>Conduct independent third-party inspections of Lifting equipment and lifting accessories</p></li><li><p>Perform frequent site visits across UAE to execute inspections, coordinate with client/site teams, and ensure inspection readiness and safety compliance.</p></li><li><p>Verify compliance with applicable UAE regulations/standards, manufacturer requirements, approved documents, and internal procedures.</p></li><li><p>Ensure compliance with ISO/IEC 17020, company Quality Management System, and Type A independence/impartiality requirements.</p></li><li><p>Face and support EIAC/LEEA technical audits/assessments (including witness audits).</p></li><li><p>Support development/improvement of technical inspection/test methods where applicable (procedures, checklists, acceptance criteria, work instructions) aligned with accreditation requirements.</p></li><li><p>Train and mentor other inspection engineers to standardize inspection practices, improve reporting quality, and develop competency.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking an Technical Manager with strong UAE experience in third-party inspections to perform independent inspections of lifting equipment &amp; accessories. The role includes review of equipment's, report/certificate issuance, participation in EIAC/LEEA audits, site visits, and training/mentoring other inspection engineers, in compliance with ISO/17020.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items&nbsp; and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><br>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items&nbsp; and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><br>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items&nbsp; and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items&nbsp; and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions&nbsp;</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items&nbsp; and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions&nbsp;</p></li></ul></li></ul><p></p></section>

<p>The role involves working on projects associated with Sewage & Stormwater, Flood Alleviation, Wastewater Networks and Water distribution networks Pumping Station, Recycling Plant and rehabilitation works. This will involve undertaking investigations, planning, designing, tendering, contract administration and construction supervising & monitoring.</p><p>Key accountabilities for this position include but are not limited to:</p><br><ul><li><p>Technical Delivery:</p></li></ul><p>Interacting with clients and contractor staff to determine and verify project requirements.</p><p>Preparing inspection reports and site records.</p><p>Performing civil and structural tests.</p><p>Providing general inspection on all construction labor and subcontracted tasks to ensure professional workmanship.</p><p>Identifying non-conforming works, generating reports and corrective actions, and coordinating responses.</p><p> Performs other responsibilities associated with this position as may be appropriate.</p><br><ul><li><p>Collaboration and working as part of a team.</p><br></li></ul><p> Work in conjunction with engineers to solve project design problems, support performing basic design calculations as required.</p><p>Conduct technical, feasibility studies and site investigations.</p><p>Liaison with teams working remotely from other parts of the world to facilitate completion of tasks, and project.</p><p>Excellent verbal and written English communication skills.</p><p>Experienced in the survey work with modern instruments and in keeping site measurement records</p><br><ul><li><p>Client Service Management</p><br></li></ul><p> Internal and external client liaison</p><p> Ability to build and maintain lasting and positive relationships.</p><p> Experience in utility diversions and management.</p><p>Proficient in software i.e. excel and MS word</p><br><ul><li><p>Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner.</p><br></li></ul><p>Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures.</p><p>Design for safety, i.e., Construction Design Management.</p><br><ul><li><p>Other duties as requested from time to time by the Assistant Resident Engineer.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>The Inspector must have relevant technical qualification and must have not less than 5 years' experience in miscellaneous Sewage / Sewerage rehab work projects and supervision of infrastructure works.</p></li><li><p>Must have a Diploma/Degree in Civil.</p></li><li><p>Must be well experienced in the survey work with modern instruments and in keeping site measurement records.</p></li><li><p>Experience in identifying non-conforming works, generating reports and corrective actions and coordinating responses.</p></li><li><p>Excellent verbal and written English communication skills.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong> 1 . Quotation &amp; LPO</strong></p><ul><li><p>Prepare quotations as requested by the HOD and the Refilling Associate Team.</p></li><li><p>Track LPO expiry dates and coordinate with clients for renewals.</p></li><li><p>Communicate with clients regarding renewals, POs, and quotations as required for annual RENT contract renewals.</p></li><li><p>Monthly basis quote.</p></li><li><p>New RFQ/preparing/gathered all documents needed as per client requirement.</p><p><strong>2 . (Daily Task)</strong></p></li></ul><ul><li><p>Assist the Technical Support Manager (HOD) with daily operational and technical tasks.</p></li><li><p>Respond to daily emails, including complaints, inquiries, and general communication.</p></li><li><p>Supporting the team with the incoming daily encounter tasks from the client.</p></li><li><p>Coordinate and review daily notes (with no notes/no refill) in the refilling work map.</p></li><li><p>Reassign refilling schedules for team members on leave by adjusting dates (1st–29th) and coordinating with temporary covering personnel. Adjust or reschedule refilling dates based on daily requests from various teams.</p></li><li><p>Support technicians during installations and maintenance by providing accurate location and contact details.</p></li><li><p>Prepare all RFQ documentation required by clients, including completing forms and gathering all necessary supporting documents.</p></li><li><p>PO log (running, no LPO) for ENBD /EIB as requested by client (always need to update)</p></li><li><p>Ensured and provided LPO details to the team if needed (especially the monthly LPO renewal quote before the LPO.</p><br></li></ul><p><strong>Weekly &amp; Monthly report</strong></p><ul><li><p>Receive monthly commission reports from the Accounts Department, distribute them to the team, and verify the accuracy of details and computations.</p></li><li><p>Assist in preparing weekly ACTIVE/CANCEL reports, monthly/yearly plans, evaluations, and other documents required by the HOD.</p></li><li><p>Review all cancelled clients: confirm cancellation reasons, verify receipt of cancellation communication, contact clients for clarification, offer alternative products, coordinate machine collection, and update reasons in the ERP.</p></li><li><p>Requesting monthly Access, yearly gate pass, and all the documents required by the client</p></li><li><p>Attendance sheet (all refilled team members need to be checked for the deduction)</p><ul><li><p>Prepare leave clearance documents for the refilling team</p></li><li><p>Handle PED design requests: coordinate with clients for vector logos, liaise with Marketing, and coordinate with Purchasing for printing (including “Sales of the Month” photos).</p></li><li><p>Provide cross-functional support to Accounts, including online portal submissions for DN/LPO processing, and verify/edit DN entries with PO numbers.</p></li><li><p>Prepare and provide supplier evaluation forms as requested by clients.</p></li><li><p>Tracking location or update/everyday 3x a day.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>speed</p></li><li><p> accuracy</p></li><li><p>multitasking ability</p></li><li><p>strong understanding. </p></li></ul><p></p></section>

General Description<br><br>This role is responsible for providing proactive technical and estimation support for all project requirements and submittals during tendering as well as project execution phase. The role spans mechanical (fluid dynamics) and electrical (genset) systems, with a strong focus on cost estimation for rental framework and maintenance contracts. It will also address documentation requirements of a technical nature by working closely with the sales and operations team.<br><br>1.1. Key Accountabilities / Responsibilities<br><br>Technical Support<br><br> Review opportunity information, specifications, drawings, and other applicable details to determine requirements for design of system. Perform all necessary calculations and analysis, interpretation of data, pressure drop and flow analysis, and generator set sizing and electrical load calculations, etc., as required. Responsible for preparation of project-specific method statements in line with scope of works, commercial & technical proposals that comply with client and regional specifications, standards and guidelines. Responsible for the preparation of project drawings (Working plans to details) complying with project design, specifications and guidelines, as follows (knowledge of geographical coordinate systems is preferred): System layout and details System cross sections Electrical and hydraulic layout Construction drawings Discharge layouts for NOC applications Assist the bid process by identification of scope of works and generation of BOQ measurement items from Client drawings and design concepts. Responsible for the compilation of cost estimates in line with engineering parameters, bill of quantity and specific client requirements, including schedule-of-rates pricing for framework agreements and annual maintenance contracts. Assist in evaluating bids and in acknowledging or declining them in line with company philosophy and strategy. Keep abreast with industry standards, client-specific requirements and recent product developments, and ensure the technical solution and support provided is in line with the changes and complements any enhancements while fulfilling the business needs. Investigate and recommend alternative methods to meet technical requirements in a cost-effective manner. Formulate comprehensive studies to bring about changes that will minimize overall project costs, increase efficiencies and increase revenue for the technical solutions provided. Coordinate simultaneous projects and manage efficient documentation control procedures. Proactively update stakeholders on current technical support status, task progression, issues and potential delays. Be fully familiar and conversant with department and company policies, procedures and processes, ensuring all work and actions undertaken are in full compliance at all times. Carry out site visits alongside the applicable Project Engineer and Operations Supervisor where required. Generate, and/or direct the draftsman to produce, ad hoc Auto CAD drawings. Coordinate as required with internal groups including purchasing, logistics, sales, operations, warehouse and accounting personnel.<br><br>Cross Functional Support/Training<br><br> Work closely with internal project stakeholders assigned to identify and resolve any project risks associated with technical solutions, contracts, documentation & execution. Identify & address problems and opportunities; escalate those that are appropriate to the Line Manager, and facilitate discussion & deliberation. Provide marketing support, prepare prequalification documentation and customised datasheets.<br><br>1.2. Qualification Requirements<br><br> Degree in Mechanical Engineering or equivalent from an internationally recognized University. Minimum 5 years' experience in an estimation or technical support role, including framework and maintenance contract tendering. GCC experience is essential, with demonstrable exposure to UAE client specifications, authority requirements and regional supply-chain pricing. Proficient in Mechanical Fluid Dynamics, Pump Applications and Selection. Working knowledge of electrical genset systems, including sizing, load calculations and associated ancillaries. Strong estimation arithmetic and logical reasoning skills, with demonstrable accuracy in quantity take-off, rate build-up and cost modelling. Proficient in Auto CAD, Microsoft Office suite, particularly MS Excel. Effective communication skills, including verbal, written and presentation skills. Demonstrable track record of managing multiple tender proposals simultaneously. Experience estimating and administering framework agreements and maintenance contracts (schedule of rates, call-off pricing, annual price escalation) is strongly preferred. Proven ability to work effectively both independently and in a team-based environment. Demonstrated willingness to be flexible and adaptable to changing priorities. Strong multi-tasking and organisational skills. Keen analytical, organisational and problem-solving skills, which enable sound decision-making. Excellent team skills with an ability to communicate and work effectively across a variety of internal and external stakeholders.

<p>An active construction project in the UAE is accepting applications from skilled Scaffolding professionals with hands-on site experience.<br /> Key Responsibilities<br /> • Erect, modify, and dismantle scaffolding structures safely<br /> • Inspect scaffolding components before and during use<br /> • Ensure platforms, ladders, and access points are properly secured<br /> • Follow approved site procedures and safety requirements<br /> • Work closely with supervisors and construction teams<br /> • Maintain proper housekeeping around scaffolding areas<br /> • Report damaged or unsafe scaffolding materials immediately<br /> • Support construction activities while maintaining safe working practices</p> <p>Note: Applicants may send their CV via WhatsApp to +971529456306</p>

<p>An active construction project in the UAE is accepting applications from skilled Scaffolding professionals with hands-on site experience.<br /> Key Responsibilities<br /> • Erect, modify, and dismantle scaffolding structures safely<br /> • Inspect scaffolding components before and during use<br /> • Ensure platforms, ladders and access points are properly secured<br /> • Follow approved site procedures and safety requirements<br /> • Work closely with supervisors and construction teams<br /> • Maintain proper housekeeping around scaffolding areas<br /> • Report damaged or unsafe scaffolding materials immediately<br /> • Support construction activities while maintaining safe working practices</p> <p>Applicants may send their CV via WhatsApp to +971 52 557 7101</p>

<p>Draftsman</p> <p>A reputable company is seeking a dedicated Architectural Draftsman to prepare accurate technical drawings and support architectural project requirements. Candidates with AutoCAD skills are preferred.</p> <p>Responsibilities</p> <p>Prepare detailed architectural drawings using AutoCAD<br /> Update drawings based on project changes<br /> Assist architects with design documentation<br /> Review drawings for accuracy and completeness<br /> Coordinate with engineering teams<br /> Maintain project drawing records</p> <p>Benefits</p> <p>Visa provided as per UAE Labor Law<br /> Medical insurance<br /> Career growth opportunities</p> <p>Location: Dubai, UAE<br /> Job Type: Full-Time</p> <p>Apply Now</p> <p>Email: shekiatan@gmail.com</p> <p>Only shortlisted candidates will be contacted.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Install, maintain, and repair complex electrical systems in heavy industrial settings, including power generation, manufacturing plants, and large-scale infrastructure projects.</p></li><li><p>Troubleshoot and diagnose electrical faults in high-voltage equipment, control systems, and motor drives using advanced diagnostic tools and schematics.</p></li><li><p>Interpret blueprints, technical drawings, and wiring diagrams to accurately plan and execute electrical installations and modifications.</p></li><li><p>Perform preventative maintenance on electrical machinery and distribution systems to ensure optimal performance and minimize downtime.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>3-4 yrs in heavy commercial vehicle.</p></li><li><p>Ability to use diagnostic tool and solve complex electrical and electronic issues </p></li><li><p>Knowledge of A/c Systems will be added advantage </p></li></ul><p></p></section>

Technical Manager (MEP) | UAEAre you an experienced Technical Manager with the leadership and technical expertise to govern complex MEP activities, manage multidisciplinary teams, and ensure engineering solutions are delivered safely, effectively, and to the highest quality standards?<br>ALEMCO is looking for a Technical Manager who can provide technical leadership across assigned projects and operational areas, establish effective governance, resolve complex technical risks, and drive consistent, high-quality engineering outcomes.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEMCO provides integrated MEP and facilities services that power some of the region’s most ambitious developments. From electrical systems to long-term maintenance, we focus on technical reliability and sustainable performance - supported by an inclusive and skilled team with a passion for engineering excellence.<br>Why Join Us? As a Technical Manager – MEP, you will oversee engineering delivery across all project phases. You’ll lead design coordination, BIM management, resource planning, and compliance, ensuring the highest standards of quality, cost-efficiency, and technical integrity.<br>About Your Team This role reports to the Head of Engineering and works cross-functionally with Planning, Commercial, Construction, and Digital Engineering teams. You’ll also interface with consultants, clients, authorities, and vendors to drive design excellence and delivery performance.<br>Your Role Manage all MEP engineering deliverables for the project scope – ensuring timely, specification-compliant outputs, strict cost/resource control, and seamless coordination between design, procurement, and construction teams. Embed BIM and modular best practices to ensure on-time, on-budget delivery.<br>Focus Areas Engineering Governance & Compliance Draughting / BIM Delivery & Resource Management Cost, Programme & Value Engineering Control<br>Responsibilities Lead end-to-end technical delivery from design verification through shop drawings, procurement support, installation, testing & commissioning. Translate consultant L3 designs into coordinated L4/L5 contractor deliverables, ensuring BIM workflows, clash resolution, and DfMA integration. Oversee technical governance across material submittals, equipment selection, controls, QA/QC, and change control. Support site teams throughout installation readiness, FATs/SATs, energisation, and commissioning milestones.<br><br>Requirements: Strong technical leadership across MEP disciplines Proficient in Autodesk Revit and MS Office Skilled in BIM workflows, QA/QC, and cost/resource control Effective communicator with cross-functional teams Leadership aligned with ALEC values: Integrity, Courage, Reliability, and Valuing People Desirable12+ years of MEP experience with recent exposure to hyperscale data centres within a contracting environment. Strong technical grounding in power distribution, cooling systems, redundancy architecture, and critical infrastructure standards (Uptime, NFPA, ASHRAE, IEC). Demonstrated leadership of multi-discipline engineering teams and specialist vendors. Ability to operate effectively in fast-paced, milestone-driven environments.<br>Qualifications & Experience Degree in Mechanical, Electrical, or related Engineering field10+ years of experience in MEP engineering, including technical leadership roles<br>What We Offer The opportunity to lead cutting-edge digital infrastructure projects A collaborative and high-performance environment Career growth and technical development in a top-tier company<br>Ready to Lead Technical Excellence? If you have the technical expertise and leadership experience to govern complex MEP activities, develop high-performing teams, and deliver consistent engineering excellence, we would love to hear from you.<br>Apply today and be part of something excellent! Please apply as soon as possible, as this advert may close once we have identified the right candidate. Although we may not be able to respond to every application, we appreciate your interest in building a future with us.