Security Guard Jobs in UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description <p>PRIMARY RESPONSIBILITIES:</p><br><br> <p>• Working as a commis chef involves learning a lot of different skills in a short amount of time and then practicing those skills by implementing them in actual tasks throughout the kitchen.<br> • Performs basic tasks of food preparation, cooks and serves any food delegated as your responsibility ensuring that the highest possible quality is maintained and that agreed standards for food preparation and presentation are met at all times.<br> • Prepares appetizers plus meat and vegetables for entrees, as well as help with the proper presentation of the food.<br> • Maintains work area to a clean, hygienic and tidy state at all times.<br> • Observes and tastes food are being cooked, samples all food prepared.<br> • Controls temperature of cooking appliance, fries and cooks simple hot food items.<br> • Assists Chef de Partie and Demi Chef de Partie to prepare A La Carte orders<br> • Learns and acts how to refill buffet table and keep it attractive during the operation hours.<br> • Assists senior chef in opening and closing the food outlets, including the food storing.<br> • Ensures that the equipment are properly handled and maintained.<br> • Able to gracefully receive constructive criticism as well as effectively carry out orders.<br> • To be punctual for work and report directly to the Supervisor Maintains a grooming standard at all times whether in the public eye or back areas.<br> • Reports any unusual incident, guest complaints, lost and found, breakage and losses to the superiors.<br> • Provides assistance to co-employees within food &amp; beverage and amongst other departments in the performance of tasks to foster team work and success for the Hotel.<br> • Attends pre-meal briefing and de-briefing daily, as well as other training sessions organized by hotel for staffs.<br> • Performs other tasks as assigned by superiors.</p><br><br> <p>REPORT LINE &amp; COMMUNICATION:</p><br><br> <p>• To assist the Head chef in ensuring that all culinary standards in that section comply with Hotel Policies and Procedures and Minimum Standards.<br> • To maintain good working relationships with colleagues and all other departments.</p><br><br> <p>OTHERS</p><br><br> <p>• Continuous learning through own IDP.<br> • Any other duties as may be assigned by the superior.</p><br><br> <p>ACCOUNTABILITIES</p><br><br> <p>• Represents Dusit’s brand and its values at all times. We will establish relationships and foremost and we will deliver an exceptional guest experience and promote Thai graciousness.</p><br><br> <p>COMPANY’S CULTURE</p><br><br> <p>• Communicate and fully embracing the Company’s culture (our Vision, our Mission and our Values), leads by example and cascade to all your subordinates. – “Proud to belong and to contribute”</p><br><br> <p>CONFIDENTIALITY</p><br><br> <p>• Ensure confidentiality and secure storage of all intellectual property and data bases, both hard copy and electronic. Adhere to Dust Internet and E-mail policy. Ensure Hotel, Customer and Staff information or transactions are kept confidential during or after employment with the company.</p><br><br> <p>JOB REQUIREMENT:<br> • Minimum education of High Vocational diploma in any discipline, degree from culinary school is preferable<br> • Knowledgeable in cooking and presentation of food. Food sanitization knowledge is a must<br> • Ability to communicate basic English<br> • Works well under pressure and tight time and space constraints.<br> • A quick learner and a good team player with good interpersonal skill.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Splunk, a Cisco company, is building a safer and more resilient digital world with an end-to-end full stack platform made for a hybrid, multi-cloud world. Leading enterprises use our unified security and observability platform to keep their digital systems secure and reliable. Come help organizations be their best, while you reach new heights with a team that has your back.<br>Splunk is looking to hire a driven sales individual whom possess a real hunting mentality, a salesperson who really thrives in developing new business, winning new logos, and understands the UAE eco-system.<br>Could this be you? Please continue reading.<br>Drive strategic decisions by leveraging deep expertise in On Prem, SaaS, cloud, and AI to deliver cybersecurity and observability insights. Serve as the Account Orchestrator by aligning Splunk solutions with customer goals to accelerate revenue growth and long term value. Own the full sales lifecycle from prospecting and pipeline management to negotiation and forecasting to achieve revenue targets. Collaborate across the Cisco ecosystem to ensure alignment with sales processes while monitoring market dynamics to identify new opportunities.<br><b>What You'll Do:</b><br><ul><li>Manage complex, multi-stakeholder sales cycles to drive significant revenue growth.</li><li>Prospect and engage with C-suite executives and key decision-makers across all levels.</li><li>Provide expert guidance on security, observability, and AI market trends to support customer adoption and strategic alignment.</li><li>Lead executive conversations regarding Generative AI and data transformation to position Splunk as a trusted partner.</li><li>Align AI-powered capabilities with customer business objectives to improve operational resilience and security outcomes.</li><li>Anticipate evolving customer needs by leveraging deep industry knowledge and analysis of business models.</li><li>Develop effective account strategies and relationship maps based on competitor and customer insights.</li><li>Interpret shifts in the competitive landscape to provide strategic recommendations to internal and external stakeholders.</li></ul><b>Minimum Qualification:</b><br><ul><li>Bachelor + Minimum 8 years of sales experience within an enterprise software vendor.</li><li>Proven knowledge of the UAE customer landscape.</li><li>Fluent in Arabic and English</li></ul><b>Preferred Qualification:</b><br><ul><li>Experience selling enterprise software, SaaS, cloud, cybersecurity, or observability solutions into large enterprise or public sector organizations.</li><li>Experience leading executive-level conversations around AI, Generative AI, data strategy, and digital transformation initiatives.</li><li>Ability to articulate the business value of AI-powered solutions and translate technical capabilities into customer outcomes.</li></ul><br>Why Cisco?&nbsp;<p>At Cisco, we’re revolutionizing how data and infrastructure connect and protect organizations in the AI era – and beyond. We’ve been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint.</p><br><br><p>Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you’ll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere.&nbsp;</p><br><br><p>We are Cisco, and our power starts with you.&nbsp;</p><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Franco Pinto is an IT solutions provider and system integrator serving organizations across the UAE, and the region&nbsp;</p><br><p>Our solutions cover IT hardware, cybersecurity, networking, data centres, cloud services, software licensing, backup, communication, surveillance, and managed IT services.</p><br><br>Job Description<br><p>Role Overview</p><br><p>We are seeking an experienced IT Procurement and Supply Chain Specialist with strong knowledge of IT hardware and the UAE distribution market.</p><br><p>The person will support our sales and project teams throughout the procurement process—from receiving an RFQ and sourcing suitable products to supplier comparison, purchasing, and delivery tracking.</p><br><p>Strong hardware knowledge is essential. The candidate should be comfortable sourcing and comparing laptops, desktops, servers, storage, networking equipment, firewalls, surveillance systems, UPS systems, communication devices, and related products.</p><br><p>Key Responsibilities</p><br><p>● Receive RFQs and procurement requests from the sales and technical teams.</p><br><p>● Source IT hardware, software licences, subscriptions, services, and renewals.</p><br><p>● Obtain and compare quotations from UAE distributors, vendors, and suppliers.</p><br><p>● Confirm that proposed products meet the requested technical and commercial requirements.</p><br><p>● Suggest suitable alternatives when requested products are unavailable or discontinued.</p><br><p>● Negotiate pricing, payment terms, warranty conditions, availability, and delivery schedules.</p><br><p>● Manage deal registrations, project pricing requests, discounts, and quotation validity.</p><br><p>● Prepare supplier comparison and project-costing sheets.</p><br><p>● Support the sales team with accurate and timely purchasing information.</p><br><p>● Prepare purchase orders and maintain procurement records in Odoo.</p><br><p>● Track orders, deliveries, licences, warranties, and outstanding supplier actions.</p><br><p>● Coordinate shipments and calculate freight, customs, VAT, and landed costs when required.</p><br><p>● Maintain supplier records and purchasing price history.</p><br><p>● Coordinate with finance regarding supplier invoices, payments, credit notes, and discrepancies.</p><br><p>● Report stock shortages, price changes, delivery delays, and other procurement risks.</p><br><p>● Build and maintain good relationships with UAE distributors and suppliers.</p><br><br>Qualifications<br><p>● 2–4 years of experience in IT procurement, preferably within the UAE.</p><br><p>● Strong practical knowledge of IT hardware across computers, infrastructure, networking, security, surveillance, power, and communication solutions.</p><br><p>● Ability to compare products, verify configurations and part numbers, and identify suitable alternatives.</p><br><p>● Good knowledge of UAE IT distributors, suppliers, stock availability, and procurement channels.</p><br><p>● Previous experience with an IT reseller, system integrator, technology distributor, or managed service provider.</p><br><p>● Familiarity with brands such as HP, HPE, Dell, Lenovo, Cisco, Fortinet, Synology, APC, Hikvision, Axis, Grandstream, Microsoft, Kaspersky, ESET, Sophos, Veeam, or similar vendors.</p><br><p>● Good understanding of software licensing, subscriptions, warranties, and renewals.</p><br><p>● Strong negotiation, organization, communication, and follow-up skills.</p><br><p>● High attention to detail when handling models, quantities, prices, currencies, and delivery terms.</p><br><p>● Good Excel or spreadsheet skills.</p><br><p>● Experience using Odoo or another ERP system is preferred.</p><br><p>● Fluency in English; Arabic is an advantage.</p><br><p>● Must be based in the UAE.</p><br><p>Preferred Qualifications</p><br><p>● Bachelor’s degree in Supply Chain, Business, Information Technology, or a related field.</p><br><p>● Experience with vendor portals, deal registration, special pricing, and project discounts.</p><br><p>● Familiarity with UAE VAT, imports, freight, customs, and landed-cost calculations.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p><br><p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p><br><br>Job Description<br><br><ul><li>Conducts daily briefing for Room Attendants</li><li>Conducts daily inspection of employee grooming.</li><li>Inspects all guest rooms, corridors and pantries on a daily basis to ensure highest standard of cleanliness.</li><li>Conducts on the job training for all Room Attendants.</li><li>Maintains effective employee relations.</li><li>Checks and maintains equipment and machines used.</li><li>Prepares job orders and co-ordinate with Engineering for follow up.</li><li>Ensure special attention given to VIP rooms.</li><li>Attends daily briefing with EKH/AEH in Housekeeping.</li><li>Report any sick, irregular guest, and any stranger on guest corridors to the Housekeeper, Security Office immediately.</li><li>Proper handover and take over of the incoming and out going shifts to be handled well.</li><li>Report all Lost &amp; Found items to Housekeeping.</li><li>Prepare discrepancy report for the front office.</li><li>Conduct fumigation for the rooms and floors.</li><li>Follow up “ Do not Disturb” rooms.</li><li>Prepare inventory for room linen.</li><li>Notify Housekeeper any damage caused by guest.</li><li>Check and follow all maintenance report If the work is incomplete.</li><li>Waters and changes all flowers as per schedule requirement.</li><li>Ensures that all flower arrangements look pleasant before the delivery to the rooms.</li><li>While inspecting guest rooms and other area there should be eye for detail.</li><li>Daily physical inspection of occupied, vacant and checkout rooms to be done at 1300 hours.</li><li>Make sure maid trolleys are parked well in the guest corridors and while cleaning room the trolleys must be parked properly at the guest room entrance.</li><li>Monitor the Key Issue no. 3 / Entering/Leaving a guest’s room is followed by the room attendant.</li><li>Be Responsible for the cleanliness, maintenance, property and hygiene of guest rooms, corridors and service areas..</li><li>Oversee the work of PA attendant</li><li>Handle all service matters to guests in the station</li><li>Be responsible for supervising the activities of Room attendant.</li><li>Check all check-out rooms and guest rooms</li><li>Be fully aware of the Rixelence of the&nbsp; day</li><li>Proper grooming at all times</li><li>Show fullest cooperation and respect within the team and other departments</li><li>Is aware of the daily activities and has product knowledge of all the hotel facilities</li></ul><br>Qualifications<br><br><ul><li>University degree in any field</li><li>Minimum 2&nbsp;years&nbsp;in a&nbsp;similar&nbsp;role&nbsp;with&nbsp;a&nbsp;five-star hotel.&nbsp;</li><li>Passionate about creating extraordinary service</li><li>Ability to work as part of a team to ensure guest satisfaction</li><li>Strong verbal communication skills</li></ul><br>Additional Information<br><br><ul><li><p><strong>What is in it for you:</strong></p><br></li><li>Employee benefit card offering discounted rates at Accor worldwide</li><li>Learning programs through our Academies</li><li>Opportunity to develop your talent and grow within your property and across the world!</li><li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Summary:</b></p><p>We are seeking an AI-Native Software Engineer who views AI not just as an autocomplete tool, but as a core collaborative partner in software delivery. In this role, you will spend less time manually writing boilerplate and more time architecting systems, designing precise technical specifications, and orchestrating multi-agent workflows.</p><p><br></p><p><b>Core Responsibilities</b></p><ul><li><b>System Architecture &amp; Design: </b>Define high-level system structures, API contracts, and data models before instructing AI tools to implement them. Own the design, not just the execution.</li><li><b>Context Engineering &amp; Spec Writing: </b>Author rigorous, unambiguous technical specifications and context rules to guide AI agents toward deterministic, reviewable outputs.</li><li><b>RAG Pipeline Design: </b>Architect and own end-to-end Retrieval-Augmented Generation pipelines, document ingestion, chunking strategy, embedding selection, vector store configuration, hybrid retrieval, and relevance evaluation.</li><li><b>Agentic Workflow Management: </b>Build and operate agent harnesses using orchestration frameworks (e.g. LangGraph, LangChain, AutoGen) including tool definitions, routing logic, guardrails, fallback paths, and evaluation hooks.</li><li><b>Human-in-the-Loop Validation: </b>Design and enforce HITL gates for agentic write operations. Know when to automate and when to require human sign-off, especially for irreversible or high-stakes actions.</li><li>Review, test, and audit AI-generated code for security vulnerabilities, performance characteristics, edge cases, and architectural alignment before it reaches production.</li></ul><p><br></p><p><b>Preferred Qualifications</b></p><ul><li>Bachelor's or Master's degree in Computer Science, Software Engineering, or equivalent deep production experience.</li><li>Experience integrating with enterprise HR, workforce, or ERP platforms (e.g. SAP SuccessFactors, Workday, Concur, or Oracle HCM) — particularly in an agentic or API integration context.</li><li><b>Hands-on ML experience beyond API consumption: </b>model fine-tuning, training pipelines, evaluation frameworks, or MLOps deployment.</li><li>Familiarity with enterprise identity providers (e.g. OKTA, Azure AD) and secure token handling in agentic contexts.</li><li>A portfolio or GitHub repository demonstrating projects built primarily via agentic or spec-driven development methodologies.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Technical Skills</b></p><ul><li><b>Engineering Fundamentals: </b>Strong mastery of computer science fundamentals — data structures, algorithms, distributed systems, and system design. You must be able to catch and correct AI errors because you understand the underlying systems.</li><li><b>Code Review &amp; Auditing: </b>Exceptional ability to read, evaluate, and critique AI-generated code across multiple languages rapidly.</li><li><b>Agentic System Design: </b>Hands-on production experience building agent harnesses, multi-agent orchestration pipelines, and supervisor/routing patterns using frameworks such as LangGraph, LangChain, or equivalent.</li><li><b>RAG &amp; Retrieval Engineering: </b>Practical experience designing RAG pipelines including vector store selection, embedding strategies, hybrid search, Reciprocal Rank Fusion, and retrieval quality evaluation.</li><li><b>AI Tooling Proficiency: </b>Advanced hands-on experience with AI-native IDEs (e.g. Cursor, Windsurf, GitHub Copilot) and command-line agentic tools (e.g. Claude Code, Aider, Codex CLI).</li><li><b>Context &amp; Prompt Engineering: </b>Proven ability to manage AI context windows, system instructions, tool schemas, and prompt structure to produce consistent, auditable outputs.</li><li><b>Cloud &amp; API Integration: </b>Solid experience with cloud-native deployment (Azure, AWS, or GCP), RESTful API design, async patterns, and enterprise identity/auth integration.</li><li><b>Testing &amp; CI/CD: </b>Strong experience writing automated test suites to validate AI-generated logic inside modern CI/CD pipelines, including adversarial and edge-case coverage.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated and knowledgeable Lifting Appointed Person to join our dynamic team in the construction and building industry. This role is pivotal in ensuring the safety and efficiency of lifting operations on site, making it an excellent opportunity for professionals looking to advance their careers in a high-stakes environment. As a Lifting Appointed Person, you will not only be responsible for overseeing lifting operations but also play a crucial role in promoting a culture of safety and compliance within the organization.</p><p>In this position, you will have the chance to work alongside experienced professionals who are committed to your development. We believe in investing in our employees through ongoing training and mentorship programs, allowing you to enhance your skills and knowledge in lifting operations, risk assessment, and safety management. This is more than just a job; it's a pathway to a rewarding career where you can make a significant impact on our projects and the safety of your colleagues.</p><p>As you grow within our organization, you will have opportunities to take on increased responsibilities and leadership roles, contributing to the strategic direction of our projects. Your expertise will be valued as we strive to maintain the highest standards of safety and efficiency in our operations. Join us in shaping the future of the construction industry while advancing your career in a supportive and innovative environment.</p><ol><li><b>Responsibilities:</b>Conduct thorough risk assessments and site inspections to identify potential hazards associated with lifting operations, ensuring compliance with safety regulations and best practices.</li><li>Develop and implement lifting plans that detail the scope of work, equipment requirements, and safety measures necessary for successful execution of lifting operations.</li><li>Coordinate with project managers, engineers, and site supervisors to ensure that lifting operations align with project timelines and objectives, facilitating seamless collaboration.</li><li>Oversee the selection and inspection of lifting equipment, ensuring all machinery meets safety standards and is suitable for the specific lifting tasks at hand.</li><li>Provide training and guidance to team members on safe lifting practices, fostering a culture of safety and compliance throughout the organization.</li><li>Monitor lifting operations in real-time, making adjustments as necessary to address unforeseen challenges and ensure the safety of all personnel involved.</li><li>Document and report on lifting operations, maintaining accurate records of inspections, incidents, and compliance with safety regulations.</li><li>Act as the primary point of contact for all lifting-related queries and concerns, providing expert advice and support to team members and management.</li><li>Stay updated on industry trends, regulations, and best practices in lifting operations, continuously seeking opportunities for improvement and innovation.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of lifting operations and safety regulations is essential for ensuring compliance and minimizing risks.</li><li>Excellent communication skills are necessary for effectively conveying safety protocols and coordinating with various teams.</li><li>Proficiency in risk assessment techniques is vital for identifying hazards and implementing effective mitigation strategies.</li><li>Experience with lifting equipment selection and inspection is crucial for maintaining operational safety and efficiency.</li><li>Leadership abilities are important for guiding and mentoring team members in safe lifting practices.</li><li>Problem-solving skills are essential for quickly addressing challenges that arise during lifting operations.</li><li>Familiarity with industry trends and advancements in lifting technology will aid in continuous improvement efforts.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Process all guest check-ins, verifying guest identity, form of payment, assigning room, and activating/issuing room key. Set up accurate accounts for each guest according to their requirements. Enter Marriott Rewards information. Ensure rates match market codes, document exceptions. Secure payment prior to issuing room key, verify/adjust billing. Compile and review daily reports/logs/contingency lists. Complete cashier and closing reports. Supply guests with directions and property information. Accommodate guest requests, contacting appropriate staff if necessary. Follow up to ensure requests have been met. Process all payment types, vouchers, paid-outs, and charges. Balance and drop receipts. Count and secure bank at beginning and end of shift. Obtain manual authorizations and follow all Accounting procedures. Notify Loss Prevention/Security of any guest reports of theft.<br>Assist management in training, evaluating, counseling, motivating and coaching employees; serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Develop/maintain positive working relationships; support team to reach common goals; listen and respond appropriately to employee concerns. Follow company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure personal appearance is clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge guests; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Ensure adherence to quality standards. Enter and locate information using computers/POS systems. Stand, sit, or walk for an extended period of time. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: At least 1 year of related work experience.<br>Supervisory Experience: At least 1 year of supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>JOB TITLE: Pain Medicine Consultant - UAE LOCATION: UAE EMPLOYMENT TYPE: Full-time SECTOR: Healthcare / Hospital / Medical Group ABOUT THE ROLE A leading, internationally accredited healthcare provider in UAE is expanding its multidisciplinary pain management, interventional procedures and rehabilitation pathways and is seeking a highly skilled Pain Medicine Consultant to join its growing clinical team.<br> The role is designed for internationally trained clinicians seeking career advancement, strong clinical exposure, and the ability to practice within a modern, quality-driven healthcare environment serving a diverse international patient population.<br> This opportunity is suitable for candidates who can combine advanced clinical expertise with patient-centred communication, multidisciplinary teamwork, and commitment to international healthcare standards.<br> ROLE OVERVIEW The successful candidate will work within a collaborative, multidisciplinary clinical environment supported by experienced consultants, nurses, allied health professionals and modern diagnostic and treatment infrastructure.<br> KEY RESPONSIBILITIES • Assess and manage acute, chronic, cancer-related, neuropathic, and musculoskeletal pain conditions.<br> • Perform image-guided pain procedures including nerve blocks, epidural injections, radiofrequency ablation and joint interventions.<br> • Develop multimodal pain plans involving medication optimisation, rehabilitation, psychology and lifestyle support.<br> • Coordinate care with orthopedics, neurology, oncology, rheumatology and rehabilitation teams.<br> • Educate patients on long-term pain control, functional restoration and safe analgesic use.<br> • Maintain high standards for consent, documentation, procedural safety and outcome tracking.<br> • Highly competitive tax-free salary package • Performance-based incentives where applicable • Housing allowance or premium accommodation support • Comprehensive medical insurance • Annual return flight tickets • Professional indemnity / malpractice coverage • Continuing medical education support • Visa and onboarding assistance LICENSING &amp; RELOCATION SUPPORT • Structured DHA / DOH / MOH license conversion assistance • DataFlow and credential verification support • Visa and regulatory processing assistance • Relocation guidance for physician and family where applicable • Dedicated onboarding support for transition into UAE clinical practice IDEAL CANDIDATE PROFILE • Strong clinical judgement with commitment to evidence-based practice and patient safety.<br> • Excellent communication skills with culturally diverse patients and multidisciplinary teams.<br> • Ability to adapt to UAE healthcare regulations, documentation standards and hospital governance expectations.<br> • Interest in long-term career development within a premium UAE healthcare setting.<br> HOW TO APPLY Interested candidates may apply with an updated CV and details of current licensing status / eligibility.<br> Shortlisted candidates will be contacted for a confidential discussion.<br> Applications are welcome from internationally trained pain medicine consultant candidates holding recognised qualifications such as: • American Board certification with Pain Medicine fellowship • UK CCT with Pain Medicine credentialing • FRCA / FFPMRCA or equivalent • European Diploma / recognised pain fellowship • Royal College Certification (Canada) • Australian Fellowship with pain subspecialty training • Arab Board or equivalent recognised specialist qualification Applications are welcome from candidates across USA, UK, Europe, Canada, Australia, India, Middle East, Africa and South America, subject to eligibility for UAE licensing and facility credentialing.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview Of The Role:</b></p><p><br></p><p>•&nbsp;&nbsp;The Data &amp; Analytics Lead is pivotal in developing and executing the data and AI enablement strategy for Al-Futtaim Financial Services (AFF), Hertz, and international businesses, aligning all initiatives with the digital transformation roadmap. The role bridges business, technology, and AI innovation, focusing on creating a unified, governed, and scalable data ecosystem. By leading the design and delivery of the AI-enabled data and analytics platform, the role aims to offer product-level profitability, portfolio insights, and operational excellence. This involves driving various analytics deliveries and building an internal AI capability crucial for automation, decision intelligence, and customer insights.</p><p>&nbsp;</p><p>&nbsp;</p><p><b>What You Will Do:</b></p><p><br></p><p>Data Strategy and Enablement</p><p>&nbsp;</p><p>•&nbsp;&nbsp;Lead the Data &amp; AI Enablement agenda by defining and executing the data strategy aligned with the Group CDO and Digital Transformation plan.</p><p>•&nbsp;&nbsp;Design and deliver the AI-enabled Data platform by establishing data pipelines and governance frameworks for AFF, Hertz, and related businesses.</p><p>•&nbsp;&nbsp;Build AI capability by developing internal data science and ML delivery capabilities for use cases like credit risk, pricing, fraud detection, and collections optimization.</p><p>&nbsp;</p><p>Data Governance and Compliance</p><p>&nbsp;</p><p>•&nbsp;&nbsp;Implement policies, metadata management, lineage, and quality frameworks aligned with Group data leads.</p><p>•&nbsp;&nbsp;Ensure data governance score achieves 95% with zero critical audit findings.</p><p>&nbsp;</p><p>Analytics and BI Delivery</p><p>&nbsp;</p><p>•&nbsp;&nbsp;Drive data analytics platform adoption, ensuring implementation of executive dashboards covering profitability, equity, RoE, and self-service analytics for business teams.</p><p>•&nbsp;&nbsp;Aim for BI adoption rate of 80% with reduction in manual reports.</p><p>&nbsp;</p><p>Collaboration and Partnership Management</p><p>&nbsp;</p><p>•&nbsp;&nbsp;Collaborate with Group &amp; Divisional teams to ensure synergy with AFS&amp;TD, GTDP, EIB and initiatives to avoid duplication and ensure reuse of shared data assets.</p><p>•&nbsp;&nbsp;Manage relationship with data engineering vendors, AI partners, and Group shared services (infrastructure, security) with SLA adherence of 95% and cost efficiency within budget.</p><p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills To Be Successful:</b></p><p>&nbsp;</p><p>•&nbsp;&nbsp;Strong technical knowledge of Azure Data Factory, Power BI, SQL, and Fabric Lakehouse.</p><p>•&nbsp;&nbsp;Familiarity with Python and ML frameworks such as Scikit-learn and Azure ML for model deployment.</p><p>•&nbsp;&nbsp;Experience establishing and enforcing data governance towards certified data concepts, lineage, and quality frameworks.</p><p>•&nbsp;&nbsp;Deep understanding of financial product data models, including Portfolio, Profitability, and RoE.</p><p>&nbsp;</p><p>&nbsp;</p><p><b>What Equips You For The Role:</b></p><p><br></p><p>•&nbsp;&nbsp;10+ years in Data &amp; Analytics roles with at least 5 years in leadership capacity.</p><p>•&nbsp;&nbsp;Hands-on experience designing and delivering fully AI enabled data platforms.</p><p>•&nbsp;&nbsp;Proven experience in AI/ML delivery, such as credit risk, pricing, and customer analytics, including building digital twins.</p><p>•&nbsp;&nbsp;Track record of managing data engineering and BI delivery teams, both internal and vendor.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job purpose</strong></p><br><p>To carry out advanced electrical and electronic diagnostics, fault finding, and repairs on customer vehicles across a wide range of Nissan and Infiniti models, using manufacturer-approved diagnostic equipment, wiring diagrams, and repair procedures in accordance with OEM standards and guidelines.</p><br><p><strong>Job Responsibilities</strong></p><br><p><strong>Financial Performance</strong></p><ul><li><p>Achieve the agreed targets for Sold Hours, Efficiency, Productivity, and Overall Utilisation.</p></li></ul><br><p><strong>Technical Operations</strong></p><ul><li><p>Perform diagnostic, electrical, and electronic subsystem repairs in accordance with approved repair procedures, wiring diagrams, and manufacturer specifications.</p></li><li><p>Use advanced diagnostic tools and equipment to accurately identify and rectify vehicle faults.</p></li><li><p>Record any additional repair work or recommendations using the E-Estimate digital application and update the Team Leader accordingly.</p></li><li><p>Receive repair orders from the Team Leader and fully understand the scope of work before commencing repairs.</p></li><li><p>Review vehicle service history and identify any applicable OEM recall campaigns.</p></li><li><p>Complete authorised repairs and notify the Team Leader of any further findings or recommendations.</p></li><li><p>Perform software updates and vehicle programming activities in line with manufacturer recommendations.</p></li><li><p>Demonstrate strong manual dexterity, technical expertise, mechanical aptitude, and advanced computer skills.</p></li><li><p>Take ownership of all aspects of the role, working effectively with minimal supervision.</p></li><li><p>Adhere to quality control procedures to prevent and correct workmanship issues that fall below required standards.</p></li><li><p>Provide cover for the Team Leader and support workshop operations when required.</p></li><li><p>Handle and resolve complex customer concerns, escalating matters to the Team Leader where necessary.</p></li><li><p>Provide mentoring, coaching, and on-the-job training to newly appointed technicians.</p></li><li><p>Assist the Team Leader with day-to-day operational activities as required.</p></li></ul><br><p><strong>Customer Experience</strong></p><ul><li><p>Handle customer vehicles with the utmost care and ensure safe working practices at all times.</p></li><li><p>Learning and Development</p></li><li><p>Maintain a clean and organised work area, ensuring personal and workshop tools remain in good condition.</p></li><li><p>Participate in Training Needs Assessments conducted by the Training Academy.</p></li><li><p>Continuously develop technical knowledge and skills through Nissan-approved training programmes.</p></li><li><p>Read and interpret complex technical documentation, including safety procedures, operating and maintenance instructions, repair manuals, and wiring diagrams.</p></li></ul><br><p><strong>Policies, Procedures, and Compliance</strong></p><ul><li><p>For warranty repairs, follow OEM warranty procedures, correctly tag replaced parts, and transfer them to the centralised warranty store.</p></li><li><p>Carry out recall campaigns, including airbag replacement programmes, in accordance with OEM requirements.</p></li><li><p>Diagnose and repair air-conditioning systems following approved service procedures.</p></li><li><p>Ensure full compliance with F1 standards and OEM guidelines.</p></li><li><p>Follow all Health, Safety, and Environment (HSE) requirements, standard operating procedures, and safety regulations, including the use of appropriate personal protective equipment.</p></li><li><p>Ensure compliance with Nissan Dealer Standards and established process guidelines.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><ul><li><p>2-year ITI (Industrial Training Institute) NCVT Certificate, or</p></li><li><p>3-year Diploma in Automobile Engineering, Mechanical Engineering, or an equivalent qualification.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>Minimum of 5 years' experience within an automotive dealership environment.</p></li><li><p>At least 2 years' experience working as an Automotive Electrician.</p></li></ul><br><p><strong>Competencies</strong></p><ul><li><p>Strong diagnostic and fault-finding skills.</p></li><li><p>Excellent manual dexterity and physical fitness to carry out repair activities.</p></li><li><p>High level of technical and mechanical competence.</p></li><li><p>Strong computer literacy and ability to use advanced diagnostic systems.</p></li><li><p>Ability to work independently and take ownership of tasks.</p></li><li><p>Effective problem-solving and decision-making skills.</p></li><li><p>Coaching and mentoring capability.</p></li><li><p>Strong attention to detail and commitment to quality standards.</p></li></ul><br><p><strong>Language Requirements</strong></p><p>Proficient in English (spoken and written).</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Junior Legal Representative <p><strong>Job Title – Junior Legal Representative</strong><br> Location: Dubai, UAE</p><br> About the Role <p>We are seeking a motivated and detail-oriented Junior Legal Representative to support the legal team in handling corporate and real estate legal matters. The role involves preparing legal documentation, coordinating with government authorities, maintaining legal records, assisting with contract reviews, and ensuring compliance with UAE laws and regulatory requirements. This position is ideal for an early-career legal professional looking to build expertise within the real estate sector.</p><br> Key Responsibilities Legal Documentation &amp; Contract Support <ul> <li> Assist in drafting, reviewing, and maintaining legal documents, contracts, agreements, and correspondence. </li> <li> Support the preparation of sale and purchase agreements, lease agreements, MOUs, and other real estate documentation. </li> <li> Review legal documents for accuracy and compliance with company policies. </li> <li> Maintain organized records of contracts and legal files. </li> </ul> Regulatory Compliance <ul> <li> Support compliance with UAE laws, real estate regulations, and company policies. </li> <li> Assist in monitoring regulatory updates and communicating relevant changes to internal stakeholders. </li> <li> Ensure legal documentation complies with applicable statutory requirements. </li> <li> Support internal compliance initiatives and legal audits. </li> </ul> Government &amp; Authority Coordination <ul> <li> Coordinate with government departments and regulatory authorities for legal documentation and approvals. </li> <li> Assist with submissions to relevant authorities, including land and real estate regulatory bodies. </li> <li> Track applications, approvals, renewals, and legal registrations. </li> <li> Maintain effective relationships with external authorities and legal service providers. </li> </ul> Legal Research &amp; Case Support <ul> <li> Conduct legal research on laws, regulations, and legal precedents relevant to company operations. </li> <li> Assist senior legal professionals in preparing legal opinions and case documentation. </li> <li> Support dispute resolution activities by compiling required documentation. </li> <li> Prepare summaries and reports on legal matters when required. </li> </ul> Corporate Legal Administration <ul> <li> Maintain legal databases, document management systems, and contract registers. </li> <li> Monitor contract renewal dates and legal compliance deadlines. </li> <li> Coordinate with internal departments regarding legal documentation requirements. </li> <li> Ensure confidentiality and secure handling of sensitive legal information. </li> </ul> Stakeholder Coordination <ul> <li> Liaise with internal departments including sales, finance, HR, and operations on legal matters. </li> <li> Coordinate with external legal consultants, notaries, and government representatives. </li> <li> Support negotiations by preparing legal documentation and background information. </li> <li> Provide administrative support to the legal department as required. </li> </ul> Qualifications &amp; Experience <ul> <li> Bachelor's Degree in Law (LLB) or a related legal discipline. </li> <li> 1–3 years of experience in legal administration, legal support, or corporate legal services. </li> <li> Experience in real estate, property development, or corporate legal environments is preferred. </li> <li> Basic understanding of UAE legal systems, contract law, and real estate regulations is an advantage. </li> </ul> Key Skills &amp; Competencies <ul> <li> Legal drafting and document management </li> <li> Contract review and administration </li> <li> Legal research and analysis </li> <li> Knowledge of UAE legal and regulatory framework </li> <li> Attention to detail and accuracy </li> <li> Strong organizational and time management skills </li> <li> Communication and interpersonal skills </li> <li> Confidentiality and professional ethics </li> <li> Problem-solving and analytical thinking </li> <li> Proficiency in Microsoft Office and legal document management systems </li> </ul> What We Offer <ul> <li> Competitive salary and benefits package </li> <li> Opportunity to build a career within a leading real estate organization </li> <li> Professional and collaborative work environment </li> <li> Career growth and continuous legal development opportunities </li> <li> Exposure to corporate, commercial, and real estate legal matters </li> </ul> <p><strong>Apply now!</strong></p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><strong>Requisition Number:</strong> 24440BR<br><strong>Description:</strong><br>The role involves working on projects associated with Sewerage &amp; Stormwater, Flood Alleviation, Wastewater Networks and Water distribution networks Pumping Station, Recycling Plant and rehabilitation works. This will involve undertaking investigations, planning, designing, tendering, contract administration and construction supervising &amp; monitoring.<br>Key accountabilities for this position include but are not limited to:<br>• Responsible for l site Safety health and environment management.<br>• Assist with the preparation of a construction health and safety plan.<br>• Confirm necessary documentation was submitted to the relevant authorities.<br>• Attend project planning meetings. Attend regular site, technical and progress meetings. Facilitate site health and safety meetings.<br>• Establish and maintain health and safety communication structures and systems, distribution of health and safety specific documents to sub-contractors.<br>• Compiling project specific emergency response and preparedness plans<br>• Testing the effectiveness of the emergency response plans<br>• Conduct site safety inductions.<br>• Oversee the reporting and investigation of project related incidents.<br>• Development of technical reports in relation to health and safety issues and communicate through presentations to diverse groups of decision makers<br>• Client Service Management<br> Internal and external client liaison<br> Ability to build and maintain safety environment at site.<br> Experience in infra project HSE supervision Management.<br>• Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner.<br> Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures.<br> Maintain the health and safety environment at workplace.<br>• Other duties as requested from time to time by the Resident Engineer<br><strong>Qualifications:</strong><br>• Bachelor's degree/Diploma in Engineering in Health &amp; Safety Management, Environmental Science or equivalent.<br>• Minimum of 5 years of experience in Miscellaneous Drainage Work, Construction rehabilitation work and Wastewater background.<br>• NEBOSH IGC level 3 is mandatory and other HSE related Diploma certification.<br>• Abu Dhabi Public Health Center Practitioner Course.<br>• Strong knowledge of HSE regulations and best practices, particularly in the UAE &amp; Abu Dhabi.<br>with UAE Driving License.<br>• Previous TAQA Approval is preferred.<br><strong>About Stantec:</strong><br>We’re active members of the communities we serve. That’s why at Stantec we always design with community in mind. We believe growing a great design company happens from the inside out. We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary.<br>The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents. We collaborate across disciplines and industries to bring projects to life. Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work. Redefine your personal best. Join us!<br><strong>Work Location(s):United Arab Emirates-Abu Dhabi</strong><br><strong>Employment Type:</strong> <strong>Full-Time</strong><br><strong>Job Type:</strong> <strong>Regular</strong><br><strong>Job Category:</strong> <strong>Environmental Health &amp; Safety, Health &amp; Safety</strong></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a highly skilled Senior Payments Engineer (Cards &amp; Cards Acquiring) to join a leading enterprise banking technology team in Dubai.<br> Operating within the Software Engineering Chapter, this role is dedicated to the end-to-end delivery, orchestration, and production support of our critical Business Platforms &amp; Payments infrastructure.<br> As a Senior Payments Engineer, you will own the technical delivery of strategic Cards Platform projects, major enhancements, and Business-As-Usual (BAU) demands.<br> This role requires a strong engineering background in credit/debit card processing systems, merchant/acquiring solutions, and high-performance payment switch integrations, working seamlessly within fast-paced Agile squads.<br> Key Responsibilities1.<br> Product Engineering &amp; Lifecycle Management Drive end-to-end technical delivery for card platforms, managing complex requirement analysis, systems design, and seamless third-party vendor integrations.<br> Lead technical execution across card lifecycle initiatives, including enhancements to payment processing, clearing, settlement, and chargeback workflows.<br> Collaborate actively within cross-functional Agile squads to translate business requirements into highly secure, stable, and scalable payment solutions.<br> 2. Cards Acquiring &amp; Payment Systems Integration Design and maintain robust components supporting the Cards Acquiring ecosystem, merchant processing frameworks, and payment gateways.<br> Oversee system integrations with global card schemes (e.<br>g., Visa, Mastercard) and regional payment networks, ensuring strict compliance with financial standards.<br> Support continuous improvement initiatives to enhance transaction success rates, lower latency, and modernize merchant onboarding platforms.<br> 3. Testing, Release &amp; Production Stability Provide advanced technical oversight during system integration testing (SIT) and user acceptance testing (UAT), quickly resolving critical engineering defects.<br> Coordinate complex code release management activities, ensuring zero-downtime deployments across highly regulated payment platform environments.<br> Act as a Tier-3 escalation point for production support, driving rapid incident management, root-cause analysis (RCA), and continuous platform stability.<br> Technical Specifications &amp; SkillsCore Cards &amp; Payments Expertise (Essential) Cards Domain: Comprehensive technical knowledge of Cards Issuing or Cards Acquiring platform engineering.<br> Acquiring Systems: Solid hands-on experience with merchant processing, POS/mPOS terminals, e-commerce payment gateways, and clearing/settlement protocols.<br> Financial Protocols: Deep understanding of messaging standards and payment switch protocols (e.<br>g., ISO 8583 , AS2805, or EMV compliance frameworks).<br> Core Engineering: Strong database skills (SQL/Oracle) and experience with backend application frameworks used to build high-throughput, low-latency transaction processing services.<br> Engineering &amp; Framework Practices Strong experience working inside Agile/Scrum software delivery environments.<br> Familiarity with enterprise ticketing and defect tracking systems (e.<br>g., Jira, ServiceNow).<br> Understanding of security and compliance frameworks mandatory in payment card industries (e.<br>g., PCI-DSS ).<br> Qualifications &amp; Experience Education: Bachelor’s or Master’s degree in Computer Science, Software Engineering, Information Technology, or a strictly equivalent technical discipline.<br> Experience: Proven track record in a Senior Software or Product Engineering role explicitly focused on Cards and Payments systems within a Bank, Fintech, or Payment Service Provider (PSP).<br> Soft Skills: Exceptional analytical and debugging capabilities, a proactive problem-solving mindset, and the interpersonal skills necessary to coordinate effortlessly between business units and core engineering teams.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>About the job</p><p><br></p><p>We are seeking an AI-Native Software Engineer who views AI not just as an autocomplete tool, but as a core collaborative partner in software delivery. In this role, you will spend less time manually writing boilerplate and more time architecting systems, designing precise technical specifications, and orchestrating multi-agent workflows.</p><p><br></p><p>Core Responsibilities</p><ul><li>System Architecture &amp; Design: Define high-level system structures, API contracts, and data models before instructing AI tools to implement them. Own the design, not just the execution.</li><li>Context Engineering &amp; Spec Writing: Author rigorous, unambiguous technical specifications and context rules to guide AI agents toward deterministic, reviewable outputs.</li><li>RAG Pipeline Design: Architect and own end-to-end Retrieval-Augmented Generation pipelines, document ingestion, chunking strategy, embedding selection, vector store configuration, hybrid retrieval, and relevance evaluation.</li><li>Agentic Workflow Management: Build and operate agent harnesses using orchestration frameworks (e.g. LangGraph, LangChain, AutoGen) including tool definitions, routing logic, guardrails, fallback paths, and evaluation hooks.</li><li>Human-in-the-Loop Validation: Design and enforce HITL gates for agentic write operations. Know when to automate and when to require human sign-off, especially for irreversible or high-stakes actions.</li><li>Review, test, and audit AI-generated code for security vulnerabilities, performance characteristics, edge cases, and architectural alignment before it reaches production.</li></ul><p><br></p><p>Required Technical Skills</p><ul><li>Engineering Fundamentals: Strong mastery of computer science fundamentals — data structures, algorithms, distributed systems, and system design. You must be able to catch and correct AI errors because you understand the underlying systems.</li><li>Code Review &amp; Auditing: Exceptional ability to read, evaluate, and critique AI-generated code across multiple languages rapidly.</li><li>Agentic System Design: Hands-on production experience building agent harnesses, multi-agent orchestration pipelines, and supervisor/routing patterns using frameworks such as LangGraph, LangChain, or equivalent.</li><li>RAG &amp; Retrieval Engineering: Practical experience designing RAG pipelines including vector store selection, embedding strategies, hybrid search, Reciprocal Rank Fusion, and retrieval quality evaluation.</li><li>AI Tooling Proficiency: Advanced hands-on experience with AI-native IDEs (e.g. Cursor, Windsurf, GitHub Copilot) and command-line agentic tools (e.g. Claude Code, Aider, Codex CLI).</li><li>Context &amp; Prompt Engineering: Proven ability to manage AI context windows, system instructions, tool schemas, and prompt structure to produce consistent, auditable outputs.</li><li>Cloud &amp; API Integration: Solid experience with cloud-native deployment (Azure, AWS, or GCP), RESTful API design, async patterns, and enterprise identity/auth integration.</li><li>Testing &amp; CI/CD: Strong experience writing automated test suites to validate AI-generated logic inside modern CI/CD pipelines, including adversarial and edge-case coverage.</li></ul><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Preferred Qualifications</p><ul><li>Bachelor's or Master's degree in Computer Science, Software Engineering, or equivalent deep production experience.</li><li>Experience integrating with enterprise HR, workforce, or ERP platforms (e.g. SAP SuccessFactors, Workday, Concur, or Oracle HCM) — particularly in an agentic or API integration context.</li><li>Hands-on ML experience beyond API consumption: model fine-tuning, training pipelines, evaluation frameworks, or MLOps deployment.</li><li>Familiarity with enterprise identity providers (e.g. OKTA, Azure AD) and secure token handling in agentic contexts.</li><li>A portfolio or GitHub repository demonstrating projects built primarily via agentic or spec-driven development methodologies.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Juman Energy Group.<br> For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.</p><br><br>Job Description<br><p><strong>1. Position Purpose</strong></p><br><p>The Lead Testing &amp; Commissioning Engineer shall lead the complete pre-commissioning, commissioning, start-up, performance testing and handover of the Project. The primary process package is the instrument air and plant air compressor system; however, successful commissioning depends on extensive integration with electrical power systems, instrumentation, package PLC, DCS/ESD/F&amp;G, mechanical and piping systems, utilities, brownfield tie-ins and offshore operations. The role is therefore multidisciplinary and shall coordinate all relevant disciplines, OEMs, subcontractors and Company representatives to achieve safe and timely system start-up.</p><br><p><strong>2. Key Accountabilities</strong></p><br><ul><li>Own and lead the overall testing and commissioning strategy, systemization, execution plan and handover process for the complete Project.</li><li>Lead commissioning of compressor and dryer packages, including mechanical run-in, electrical energization, instrumentation calibration, logic validation, functional testing and performance testing.</li><li>Act as the single focal point for commissioning interfaces among Engineering, Procurement, Construction, OEMs, subcontractors, ADNOC Offshore Operations and the project management team.</li><li>Ensure all systems and subsystems are mechanically complete, safe, properly documented and ready before energization, introduction of utilities or start-up.</li><li>Drive closure of punch items, technical queries, interface issues and commissioning constraints to meet project milestones.</li></ul><p><strong>3. Detailed Roles and Responsibilities</strong></p><br><p>3.1 Commissioning Management and Planning</p><br><ul><li>Develop the overall Pre-Commissioning, Commissioning, Start-up and Performance Test Plan for the project.</li><li>Define commissioning systems, subsystems, boundaries, priorities, turnover sequence and required completion milestones.</li><li>Prepare and maintain the commissioning schedule, resource plan, vendor mobilization plan and offshore execution sequence in coordination with Planning and Construction.</li><li>Establish commissioning readiness criteria, system handover requirements, Mechanical Completion (MC), Ready for Commissioning (RFC), Ready for Start-up (RFSU) and final acceptance requirements.</li><li>Prepare and maintain the Commissioning Register, system/subsystem status tracker, punch list register, constraint register, interface register and vendor attendance schedule.</li><li>Coordinate commissioning inputs for shutdown planning, brownfield tie-ins, SIMOPS, offshore campaigns and marine/logistics requirements.</li><li>Conduct commissioning readiness reviews, daily coordination meetings and system walkdowns with all stakeholders.</li></ul><p>3.2 Compressor and Mechanical Package Commissioning</p><br><ul><li>Lead pre-commissioning and commissioning of instrument air and plant air compressors, dryers, filters, receivers, after-coolers, drains and associated auxiliaries.</li><li>Verify package installation, alignment, lubrication, cooling, ventilation, cleanliness, flushing, leak testing and readiness for initial start.</li><li>Coordinate compressor OEM activities including preservation release, pre-start inspection, first start, no-load/load trials, vibration checks, capacity testing and reliability run.</li><li>Validate compressor loading/unloading sequence, duty/standby operation, automatic changeover, pressure control, dryer regeneration and package operating philosophy.</li><li>Coordinate piping blowdown, flushing, pressure/leak testing, reinstatement, line-up and introduction of air to the existing platform networks.</li><li>Lead package performance testing against approved datasheets, guaranteed capacity, pressure, dew point, power consumption and other contractual performance criteria.</li><li>Ensure safe interface with existing instrument air and plant air systems during cutover and transition.</li></ul><p>3.3 Electrical Testing and Energization</p><br><ul><li>Lead testing, energization and functional checks for all electrical systems supporting the project package, including HV/LV switchgear, MCCs, VFDs, UPS/DC systems, distribution boards, transformers and control panels as applicable.</li><li>Review and approve energization procedures, switching programs, electrical isolation plans, LOTO requirements and energization certificates.</li><li>Ensure completion and acceptance of insulation resistance, continuity, earthing, contact resistance, primary/secondary injection, protection relay, functional and inter-trip tests.</li><li>Verify protection settings, relay coordination, motor starting requirements, control power availability and interfaces with existing electrical systems.</li><li>Lead motor solo runs, rotation checks, VFD tuning, current/vibration monitoring and load testing of compressor motors and auxiliaries.</li><li>Coordinate electrical OEM support and resolve issues related to switchgear, MCC, VFD, ECMS/PMS and package power/control interfaces.</li></ul><p>3.4 Instrumentation, Control and ICSS Integration</p><br><ul><li>Lead calibration, loop checking and functional testing of pressure, temperature, flow, dew point, vibration and other package/process instruments.</li><li>Ensure completion of instrument installation checks, impulse line verification, tubing leak tests, instrument air connections, range/settings verification and calibration records.</li><li>Review and validate I/O lists, loop diagrams, instrument index, alarm and trip set points, control narratives, Cause &amp; Effect matrices and shutdown philosophy.</li><li>Lead package PLC, DCS, ESD, F&amp;G, ECMS/PMS and other ICSS interface testing, including hardwired and communication signals.</li><li>Coordinate Factory Acceptance Tests (FAT), Integrated FAT, Site Acceptance Tests (SAT), loop tests, logic tests and end-to-end functional tests.</li><li>Validate compressor start permissive, trips, alarms, sequencing, duty/standby changeover, remote/local operation and emergency shutdown response.</li><li>Coordinate DCS graphics, alarm displays, trends, historian points and operator interface validation with ADNOC Operations.</li></ul><p>3.5 Engineering, Construction and Vendor Interface</p><br><ul><li>Review engineering deliverables from a commissioning and operability perspective, including P&amp;IDs, SLDs, layouts, cable schedules, loop drawings, logic diagrams, Cause &amp; Effect, datasheets and vendor documents.</li><li>Identify commissioning requirements early and ensure they are incorporated into design, procurement, construction and vendor scope.</li><li>Provide input to constructability, operability, maintainability, HAZOP/PHA, design reviews, 3D model reviews and shutdown/tie-in studies.</li><li>Coordinate resolution of design changes, field changes, technical queries, NCRs, interface gaps and vendor deviations affecting commissioning.</li><li>Confirm preservation, storage, installation and pre-commissioning requirements for vendor packages and long-lead equipment.</li><li>Ensure adequate availability of commissioning spares, consumables, temporary facilities, test equipment, special tools and vendor specialists.</li></ul><p>3.6 Offshore Brownfield, SIMOPS and Start-up Coordination</p><br><ul><li>Plan and coordinate offshore commissioning activities in live operating facilities with minimum disruption to existing operations.</li><li>Prepare detailed tie-in, cutover, isolation, de-isolation, reinstatement and start-up sequences in coordination with ADNOC Operations.</li><li>Ensure compliance with PTW, SIMOPS, LOTO, energy isolation, electrical safety rules and offshore work control requirements.</li><li>Participate in job safety analysis, task risk assessments, toolbox talks, pre-start-up safety reviews and operational readiness reviews.</li><li>Coordinate offshore manpower, rotation, access, logistics, material movement and vendor/OEM attendance for commissioning campaigns.</li><li>Provide immediate technical leadership for troubleshooting and safe recovery from failed tests, trips or start-up issues.</li></ul><p>3.7 Documentation, Completion and Handover</p><br><ul><li>Prepare, review and obtain approval for pre-commissioning, commissioning, energization, functional test, start-up and performance test procedures.</li><li>Ensure complete and accurate ITRs, check sheets, loop folders, FAT/SAT reports, test certificates, calibration records and commissioning dossiers.</li><li>Manage MC, RFC, RFSU, System Completion and final handover dossiers in accordance with project and ADNOC requirements.</li><li>Coordinate red-line markups, as-built drawings, O&amp;M manuals, spare parts records, vendor data books and final turnover documentation.</li><li>Lead punch categorization and closure, ensuring no safety-critical or start-up-blocking punch remains open before commissioning.</li><li>Prepare daily, weekly and monthly commissioning reports, progress curves, look-ahead plans, risk/constraint reports and management updates.</li><li>Coordinate training, familiarization and final handover to ADNOC Operations and Maintenance teams.</li></ul><p>4. HSE and Quality Responsibilities</p><br><ul><li>Demonstrate visible HSE leadership and stop any unsafe testing, energization or start-up activity.</li><li>Ensure all commissioning works comply with ADNOC HSE requirements, Electrical Safety Rules, PTW, LOTO, SIMOPS and project procedures.</li><li>Confirm calibrated and certified test equipment is used and all test records are traceable.</li><li>Ensure commissioning activities comply with approved Inspection and Test Plans, method statements and quality requirements.</li><li>Lead incident/near-miss reporting, technical investigation and corrective action for commissioning-related events.</li></ul><p>5. Team Leadership</p><br><ul><li>Lead and coordinate commissioning engineers, discipline engineers, supervisors, technicians, vendors, OEM specialists and subcontractor personnel.</li><li>Allocate responsibilities by system and discipline and ensure clear ownership of commissioning deliverables and field activities.</li><li>Mentor team members, provide technical guidance and maintain effective communication between office, yard and offshore teams.</li><li>Forecast manpower and specialist requirements and support timely mobilization, offshore certification and competency verification.</li><li>Promote collaborative working with ADNOC representatives while protecting project scope, schedule, quality and contractual requirements.</li></ul><p><strong>4. Key Deliverables</strong></p><br><ul><li>Approved Commissioning Execution Plan and system/subsystem breakdown.</li><li>Commissioning procedures, energization plans, test packs and performance test procedures.</li><li>Commissioning schedule, resource/vendor mobilization plan and readiness tracker.</li><li>MC/RFC/RFSU/System Completion dossiers and punch-list closeout records.</li><li>Daily/weekly/monthly progress reports and commissioning risk/constraint registers.</li><li>Final handover dossiers, as-built documentation, operating records and training completion.</li></ul><br>Qualifications<br><p><strong>Minimum Qualification and Experience:</strong></p><br><ul><li>Bachelor's degree in Electrical Engineering, Instrumentation &amp; Control Engineering, Mechanical Engineering or equivalent. An Electrical or Instrumentation background with strong compressor/mechanical package commissioning experience is preferred.</li><li>Minimum 16 years of experience in Oil &amp; Gas EPC projects, with at least 8 years in testing, commissioning and start-up leadership roles.</li><li>Demonstrated experience in commissioning compressor packages and associated electrical, instrumentation, control and utility systems.</li><li>Substantial offshore brownfield experience, including live-plant tie-ins, shutdowns, SIMOPS and start-up activities.</li><li>Experience with ADNOC Offshore or similar major operating companies is strongly preferred.</li><li>Proven experience coordinating package OEMs, electrical vendors, ICSS vendors, construction teams and operations personnel.</li><li>Ability to independently lead multidisciplinary commissioning from engineering review through final handover.</li></ul><p><strong>Required Technical Competencies:</strong></p><br><ul><li>Compressor package operation and commissioning, including rotary screw/centrifugal compressor systems, dryers and air treatment equipment.</li><li>HV/LV electrical systems, switchgear, MCCs, VFDs, motors, UPS/DC systems, protection and energization.</li><li>Instrumentation calibration, loop checking, package PLC, DCS/ESD/F&amp;G integration, Cause &amp; Effect and functional testing.</li><li>Mechanical completion, systemization, commissioning dossiers, punch management and turnover processes.</li><li>Brownfield tie-ins, isolation philosophy, cutover planning, SIMOPS and offshore commissioning execution.</li><li>Ability to read and interpret P&amp;IDs, SLDs, schematics, wiring diagrams, loop drawings, logic diagrams and vendor documentation.</li><li>Knowledge of ADNOC standards, IEC, ISA, API, NFPA and applicable hazardous-area requirements.</li></ul><p><strong>Software and Tools:</strong></p><br><ul><li>MS Office, advanced Excel-based trackers and commissioning reporting tools.</li><li>EDMS/Aconex/Wrench or similar document management systems.</li><li>Commissioning management or completion systems such as WinPCS, ICAPS, Zenator, CoConsole or equivalent.</li><li>ETAP and electrical testing tools such as Omicron, Megger and Fluke are desirable.</li><li>PLC/DCS diagnostic and configuration exposure relevant to ABB, Siemens, Schneider, Rockwell or other project systems is desirable.</li><li>AVEVA E3D/PDMS, Navisworks or similar model review tools are desirable.</li></ul><br>Additional Information<br><p><strong>Personal Attributes:</strong></p><br><ul><li>Strong leadership, ownership and decision-making capability in high-pressure site and offshore environments.</li><li>Excellent multidisciplinary coordination, communication, reporting and stakeholder-management skills.</li><li>Systematic approach to safety, quality, documentation, troubleshooting and closeout.</li><li>Ability to work across engineering, construction, commissioning and operations teams and manage multiple vendors simultaneously.</li><li>Willingness and medical fitness to travel and work offshore as required.</li></ul><br><br> </div>

Job Description<br><br>The Role<br><br>This is an exciting opportunity for an experienced Structural Construction Superintendent with multi disciplinary experience and a proven track record in overseeing and coordinating all on-site activities, ensuring projects are completed on time, within budget, and according to quality and safety standards for a high-profile client.<br><br>Our Clients and Projects <br><br>Designing the future. Transforming the world<br><br>Wood's Oil, Gas & New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.<br><br>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonization and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory.<br><br>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.<br><br>What We Can Offer<br><br>Meaningful and interesting projects: Delivered to high profile clients across the Energy Sector Commitment to Diversity and Inclusion: We are an organisation actively committed to diversity and inclusion across our business Competitive remuneration package: With regular reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient, and outpatient medical care is available should you require treatment Group Life and Personal Accident Insurance: The company provides Life Assurance cover End of Service Gratuity: In line with UAE Labor Law, all employees are eligible for an End of Service benefit The Employee Share Plan: Gives you the opportunity to purchase Wood shares and receive a match from the company Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones Commitment to continued professional development: Development plans that are tailored to your individual needs and interests Global connections: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Energy Transition Academy: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field<br><br>The Key Objectives For This Role Are<br><br>Assures the quality and integrity of each project, bringing projects in on schedule and within budget. Using in-house construction management procedures and experience, provide continuity and consistency of construction management with quality assurance and reliable control Oversees total construction field effort to ensure project is constructed in accordance with design, specifications, budgets and schedules Oversees total construction field effort to ensure project is constructed in accordance with design, specifications, budgets and schedules. Generally responsible for projects or subset of project with value above USD 500 million<br><br>Responsibilities<br><br>Key Accountabilities and Responsibilities: <br><br>Responsible for construction and contractor related deliverables Supervises all areas on small projects and / or a subset / discipline on larger projects Responsible for management and execution of multiple field disciplines or a subset of assigned construction project(s) in accordance with the requirements of the contract between the company and the client, and in accordance with the company’s operating policies and principles Responsible for execution of the work in accordance with the quality standards and requirements specified for the project Manages and controls project cost and schedule of assigned disciplines / subset of on site construction Management of installation, commissioning and completion activities of materials and equipment Coordinates field personnel work schedules to maximise utilisation and ensure work is delivered on schedule Ability to monitor work progress and report against the plan Ensure safety, quality and environmental responsibilities and accountabilities have been defined and communicated to workers engaged within their area(s) of control Ensure all workers within their area(s) of control receive appropriate training to perform their work in a safe, legal and competent manner including any Health and Safety and site-specific inductions Initiate safety, quality and environmental processes within their area(s) of control, including toolbox meetings, inspections, and the identification, assessment and control of risks in accordance with Wood and client requirements Manages and controls project cost and schedule of assigned discipline / subset of on site construction. Utilise Commercial processes to capture variations effectively Coordinate supply and delivery of equipment, subcontractors, consumables, accommodation and other project-specific requirements, in accordance with client/contract document specifications and in accordance with Wood Policies & Procedures Understand and manage the industrial relations environment impacting the site and report any issues as required Works with engineering in the design phases to influence the design for optimum constructability <br><br>Qualifications<br><br>Skills And Qualifications <br><br>What makes you remarkable? <br><br>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br>Expected<br><br>Degree with a minimum of 15 years Oil and Gas industry experience, including at least 5 years on major capital projects, (> 500 M USD) with Construction Management and Site Management focus Experience within an Oil and Gas operating company is also highly desired and may be considered in lieu of capital project experience Must have excellent communications skills, both written and verbal, with a strong command of the English language. Must be willing to travel extensively for multi-week periods and have the flexibility to adjust work location to support project needs Must be qualified to obtain a CICPA and a UAE work visa<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Company Description<br> <br>Work with Us. Change the World.<br> <br>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.<br> <br>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.<br> <br>We're one global team driven by our common purpose to deliver a better world. Join us.<br> <br>Job Description<br> <br>The Civil Works Manager – Depot & Online Buildings is responsible for the management, technical direction and delivery assurance of all civil and structural works associated with the depot facilities and the online (wayside) buildings of the High Speed Rail project. The role covers design review, construction supervision, quality, schedule and cost control, and interface management for rolling stock depots, maintenance facilities and all buildings located along the railway alignment, ensuring that works are delivered safely, to specification, and in accordance with applicable international and local rail standards.<br> <br>Depot Buildings<br> Manage and oversee the design development, review and construction of depot civil and structural works, including rolling stock maintenance workshops, stabling sheds, inspection pits, wheel-lathe and wash-plant buildings, and associated foundations and structures. Direct the delivery of depot administration, operations control, warehouse/stores, fuel and lubrication, fire station, security and staff welfare buildings. Oversee depot-wide infrastructure including internal roads, hardstanding, drainage, retaining structures and boundary works, ensuring coordination with track, systems and utility works within the depot footprint. Coordinate civil works interfaces with permanent way, overhead contact system (OCS), signalling, power and building services (MEP) contractors within the depot. <br>Online (Wayside) Buildings<br> Manage civil and structural works for buildings located along the alignment, including signalling equipment rooms, traction power substations and OCS feeder stations, telecommunications huts, ventilation and plant buildings, and emergency access/escape structures. Oversee construction of station-related civil/structural elements, patrol and maintenance buildings, staff welfare cabins and security posts sited along the corridor. Ensure online buildings are correctly sequenced and interfaced with earthworks, structures, track possessions and systems installation activities along the alignment. <br>General Management & Technical Duties<br> Lead a multidisciplinary team of civil/structural engineers and site supervisors, allocating resources across depot and wayside building work-fronts. Review and approve design deliverables, drawings, specifications and method statements for compliance with contract requirements and applicable codes (e.g., Eurocodes, UIC, AREMA, or project-specified equivalents, and local UAE/GCC building and civil defence codes). Supervise contractors and subcontractors on site, monitoring workmanship, quality assurance/quality control (QA/QC), and adherence to approved methods and programme. Develop and maintain the civil works construction programme for depot and online buildings, monitoring progress, identifying delays and implementing recovery measures. Manage cost control, change/variation assessment and reporting for the civil works package(s) under their responsibility. Enforce project health, safety and environmental (HSE) requirements across all depot and online building work sites. Manage technical and programme interfaces with systems-wide contractors (rolling stock, signalling, power, telecommunications, permanent way) and with the client, engineer and relevant authorities (municipalities, utility providers, civil defence). Chair/participate in technical and progress review meetings, and prepare regular progress, risk and status reports for project leadership. Manage risk registers, non-conformances and defects for the civil works scope, and support testing, commissioning and handover of depot and online buildings. Review and verify as-built documentation, O&M manual inputs and close-out records for the civil works scope. Mentor and provide technical guidance to junior engineers and site staff. <br>Minimum Qualifications & Experience<br> <br>The following are the mandatory minimum requirements for this position:<br> Not less than fifteen (15) years’ experience in the management of design and/or construction of rail projects, and in their required field of expertise. A minimum of five (5) years of that experience specifically in the management of design and/or construction of a railway project. Experience in the implementation of High Speed Rail (HSR) projects is highly preferable. Must have held the same or an equivalent position on at least one project of a similar size and complexity. Middle East and UAE experience is considered highly advantageous. <br>Qualifications<br> <br>University degree in Civil Engineering (or closely related discipline); a Master’s degree and/or Chartered Engineer status is preferred.<br> <br>Additional Information<br> <br>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.<br> <br>About AECOM<br> <br>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.<br> <br>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.<br> <br>What makes AECOM a great place to work<br> <br>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.<br> <br>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.<br> <br>Req ID: J10158327<br> <br>Business Line: Transportation<br> <br>Business Group: DCS<br> <br>Strategic Business Unit: ME and Africa<br> <br>Career Area: Program & Project Management<br> <br>Work Location Model: On-Site

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an experienced PMC Senior Construction Manager with extensive experience in the oil and Gas industry for ADNOC Gas client in Abu Dhabi within our Oil, Gas &amp; New Energies business.&nbsp;</p><br> <p><br> Due to the nature of the projects and client expectation, the position will be based at onshore site in Abu Dhabi, United Arab Emirates.&nbsp;<br> &nbsp;</p><br><br> <p><strong>The Role&nbsp;</strong></p><br> <p>This is an exciting opportunity for an experienced PMC Senior Construction Manager with a proven track record in directly managing and is accountable for&nbsp;the planning and execution of the Islands U/G civil works, onshore fabrication and the offshore transportation and installation / mechanical completion of the components and brownfield modifications of the project&nbsp;to ensure that the project objectives are achieved.&nbsp;Leads construction efforts to ensure the project is executed in accordance with ADNOC Gas and project procedures and Shareholder expectations.&nbsp;Directly manages Construction Leaders for on island construction and onshore precast for a high - profile client.</p><br> <p><strong>Our Clients and Projects&nbsp;</strong></p><br> <br> <p>Wood's Oil, Gas &amp; New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.&nbsp;</p><br> <br> <p>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonization and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory. &nbsp;</p><br> <br> <p>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.&nbsp;</p><br> <p><strong>What we can offer</strong>&nbsp;</p><br> <ul> <li><strong>Meaningful and interesting projects:</strong> Delivered to high profile clients across the Energy Sector&nbsp;</li> </ul> <ul> <li><strong>Commitment to Diversity and Inclusion: </strong>We are an organization actively committed to diversity and inclusion across our business &nbsp;</li> </ul> <br> <ul> <li><strong>Competitive remuneration package:</strong> With regular reviews to ensure we are rewarding at the right level in line with the market &nbsp;</li> </ul> <br> <ul> <li><strong>Medical Insurance:</strong> Ensures inpatient, and outpatient medical care is available should you require treatment&nbsp;</li> </ul> <br> <ul> <li><strong>Group Life and Personal Accident Insurance</strong>: The company provides Life Assurance cover&nbsp;&nbsp;</li> </ul> <br> <ul> <li><strong>End of Service Gratuity: </strong>In line with UAE Labor Law, all employees are eligible for an End of Service benefit&nbsp;</li> </ul> <br> <br> <ul> <li><strong>The Employee Share Plan</strong>: Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li> </ul> <br> <ul> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5 - year service milestones&nbsp;</li> </ul> <br> <ul> <li><strong>Commitment to continued professional development:</strong> Development plans that are tailored to your individual needs and interests &nbsp;</li> </ul> <br> <ul> <li><strong>Global connections</strong>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession &nbsp;</li> </ul> <br> <ul> <li><strong>Energy Transition Academy: </strong>Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field&nbsp;</li> </ul> <p><strong>The key objectives for this role are:&nbsp;</strong></p><br> <ul> <li>Developing a comprehensive project plan and detailed schedule, coordinating with architects, engineers, contractors, and other stakeholders.</li> <li>Estimating costs accurately, controlling the budget throughout the project, and suggesting cost-effective alternatives.</li> <li>Ensuring that construction work meets required standards and specifications.</li> <li>Identifying potential risks and developing mitigation strategies to address them.</li> <li>Overseeing contracts with consultants, contractors, and vendors, ensuring compliance with terms and conditions.</li> <li>Regularly reporting on project progress to stakeholders, including any issues or delays.</li> <li>Facilitating smooth communication between all parties involved in the project to ensure everyone is aligned and informed</li> </ul> <br> <br> <br><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Key Accountabilities and Responsibilities:&nbsp;</strong></p><br><ul> <li>Lead the Construction team to support the objectives and strategies</li> <li>Champion safety in all construction aspects and promote the safety objective that “Nobody gets Hurt”</li> <li>Manage the On Island Construction teams responsible for the planning, development and operations to ensure construction execution certainty</li> <li>Manage the Contractor’s construction planning and execution efforts to ensure compliance with Project objectives, strategies, obligations and requirements</li> <li>Establish a construction organization to implement the Project execution plans and procedures and coordinate resourcing of construction team positions</li> <li>Provide construction and execution strategy support to the Project Team through construction oversight and assistance</li> <li>Ensure that the Contractor and Subcontractors are compliant with project safety expectations, policies and procedures</li> <li>Steward the development of an Integrated Safety Plan for construction, including SIMOPS for all island and brownfield work</li> <li>Assist in the review and implementation of all Contractor safety plans</li> <li>Steward interfaces and interactions between the Contractor and other UZ Projects, Production Operations, and Drilling</li> <li>Manage the interface with ADNOC Offshore OPCO to execute brownfield works in order to minimize disruption in ongoing production operations</li> <li>Ensure that the detailed design deliverables support constructability</li> <li>Report construction progress, performance, initiatives and issues to the Project Team</li> <li>Lead construction planning teams to identify vulnerabilities and opportunities</li> <li>Sponsor construction related readiness reviews, constructability workshops and CERs</li> <li>Take a leadership role in mentoring and training UAE Nationals in construction management</li> <li>Clearly communicate to direct reports short term and long-term goals that support the project objectives</li> <li>Encourage and recognize outstanding performance, and ensure that staff are appraised regularly and developed accordingly</li></ul><br>Qualifications:<br> <p><strong>Skills And Qualifications&nbsp;</strong></p><br><br> <p><strong>What makes you remarkable?&nbsp;</strong></p><br><br> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><br> <p><strong>Expected:</strong></p><br><br><ul> <li>Bachelors Degree is essential to apply for this role&nbsp;</li> <li>Offshore Experience along with brownfield experience&nbsp;</li> <li>Minimum of 20 years of experience on large oil and gas projects&nbsp;</li> <li>Excellent leadership and communication skills (written and verbal) and an ability to work with people across a diversity of cultures</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Wood is currently recruiting for an experienced Senior Construction Supervisor -E&amp;I with extensive experience in the oil and Gas industry for ADNOC Onshore client to be based in Abu Dhabi within our Oil, Gas &amp; New Energies business.&nbsp; <br> Due to the nature of the projects and client expectation, the position will be based at onshore site in Abu Dhabi, United Arab Emirates.&nbsp; <br> <br> <br> <strong>The Role&nbsp;</strong> <br> <p>To supervise, coordinate, and monitor all construction activities executed by EPC contractors ensuring compliance with ADNOC standards, project specifications, approved drawings, HSE requirements, quality procedures, and project schedules. The Construction Supervisor acts as the PMC representative at site to ensure safe, efficient, and quality execution of construction works.</p><br> <p><strong>Our Clients and Projects&nbsp;</strong></p><br> <br> <p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br> <br> <p>Wood's Oil, Gas &amp; New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.&nbsp;</p><br> <br> <p>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonization and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory. &nbsp;</p><br> <br> <p>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.&nbsp;</p><br> <p><strong>What we can offer</strong></p><br> <ul> <li><strong>Meaningful and interesting projects:</strong> Delivered to high profile clients across the Energy Sector&nbsp;</li> </ul> <br> <ul> <li><strong>Commitment to Diversity and Inclusion: </strong>We are an organization actively committed to diversity and inclusion across our business &nbsp;</li> </ul> <br> <ul> <li><strong>Competitive renumeration package: </strong>With regular reviews to ensure we are rewarding at the right level in line with the market &nbsp;</li> </ul> <br> <ul> <li><strong>Medical Insurance: </strong>Ensures inpatient, and outpatient medical care is available should you require treatment&nbsp;</li> </ul> <br> <ul> <li><strong>Group Life and Personal Accident Insurance:</strong> The company provides Life Assurance cover&nbsp;&nbsp;</li> </ul> <br> <ul> <li><strong>End of Service Gratuity: </strong>In line with UAE Labor Law, all employees are eligible for an End of Service benefit&nbsp;</li> </ul> <br> <br> <ul> <li><strong>The Employee Share Plan:</strong> Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li> </ul> <br> <ul> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5 - year service milestones&nbsp;</li> </ul> <br> <ul> <li><strong>Commitment to continued professional development:</strong> Development plans that are tailored to your individual needs and interests &nbsp;</li> </ul> <br> <ul> <li><strong>Global connections: </strong>Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession &nbsp;</li> </ul> <br> <ul> <li><strong>Energy Transition Academy</strong>: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field&nbsp;</li> </ul> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><ul> <li>To facilitate and formulate Construction Supervision, management, coordination, administration and strict enforcement of the Construction scope included as part of FEED/EPC Contract in line with Client's objective of progressing Work Order completion timely and to project schedule&nbsp;</li> <li>Coordination of the FEED/EPC Contractor from construction through commissioning and handing over of FEED/EPC works</li> <li>Review and provide input to the overall construction/installation plan, procedures and construction/installation requirements identified in the EPC Packages developed by FEED contractor to ensure efficient constructability</li> <li>Ensure the construction/installation plan, procedures and requirement developed by EPC contractor comply with the EPC Scope of Work intent and requirements.</li> <li>Coordinate and assist fabrication works at EPC contractor’s or EPC contractor's subcontractor’s fabrication facilities</li> <li>Supervise, monitor and inspect the work EPC contractor and EPC contractor’s subcontractors at the construction location (or place of manufacture where applicable) in accordance with ADNOC Onshore policy for supervision, quality assurance, control and inspection for the project.</li> <li>Maintain EPC contractor’s adherence to safety, quality and schedule requirements for construction.</li> <li>Participate in identifying Construction slippage and recommend corrective action(s) to be performed by EPC contractor</li> <li>Provide construction input to estimates as and when required</li> <li>Review design documents and provide constructability input to designs</li> <li>Undertake visits to facilities/sites to support the development of construction activities, review designs and liaise with EPC Contractor or EPC Contractor’s Subcontractors&nbsp;</li> <li>Identify any Specialist Vendor Support, Tools and Equipment required to implement scope</li> <li>Interface with ADNOC Offshore’s Operations groups as &amp; when necessary</li> <li>Taking part in site surveys and generation of reports where required</li> <li>Formulate Construction deliverables in line with Project procedures for content, and accuracy</li> <li>Assist with construction input to Bid preparation</li> <li>Development of Construction requirements for Bid estimates</li> <li>Thorough working knowledge and experience of construction completion procedures &amp; Pre-commissioning activities</li> <li>Involved in Effective Change Management</li> <li>Liaise closely with ADNOC Onshore PMT team on all aspects of design and technical data</li> <li>Coordinate &amp; carry out required timely Constructability reviews, in line with Model progression</li> <li>Ensure the required Constructability Readiness reviews are addressed to suit the planned deliverables timing</li> <li>Liaise strongly with Procurement team for materials &amp; equipment deliverables for alignment to the overall project schedules</li> <li>Coordinate with Project controls on the progress of work order issuance, and proposed completion dates</li> <li>Participate in HSE improvement activities, promoting HSE elements throughout construction development wherever possible</li> <li>Full working knowledge of construction activities in relation to the relevant discipline</li> <li>Ability to review engineering design drawings and challenge work content for any improvement / cost effective methodology that can be adopted without compromise to safety.&nbsp;</li> <li>Also to be able to challenge engineering detail for possible areas of where hot work can be reduced/minimized.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelors Degree or Diploma in Electrical Engineering or related disciplines.</li> <li>Minimum 10-15 years of pipeline construction experience in oil and gas projects.</li> <li>Minimum 5 years in a PMC or client representative role</li> <li>ADNOC onshore project experience preferred</li> <li>Strong Knowledge of&nbsp;</li> <li>ASME B31.4/B31.8</li> <li>API standards</li> <li>ADNOC onshore specifications</li> <li>Pipeline welding and NDT requirements&nbsp;</li> <li>Hydrotesting and commissioning procedures.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b>About Us</b> <br></span><p>Our team consists of 25,000 colleagues, spread across 35 countries. We believe in transformation – embracing agile and new ways of working together, which helps us to truly ‘think client’ and serve millions of our affluent and emerging affluent clients, across the world. Our clients include individuals and small businesses, and we support them with a range of traditional banking services, including investment, credit and wealth planning solutions.</p><br><br> <p>We offer career opportunities for relationship managers, customer service specialists, product and segment management, sales and wealth planning.</p><br><br> <br> <p><strong>If you’re looking to unlock new job growth opportunities, Standard Chartered Bank is the place for you. We are currently seeking an experienced professional to join our team. </strong></p><br><br> <br> <p><strong>About Wealth and Retail Banking</strong></p><br><br> <p>Wealth and Retail Banking (WRB) serves more than 11 million clients in many of the world’s fastest-growing markets. Our client continuum spans from Mass Retail to Affluent, including high-net worth clients served by our Private Bank. We leverage digital banking channels with a human touch to provide clients with differentiated products and services such as deposits, payments, financing, wealth management and personalised advice. We also support small business clients with their business banking needs.</p><br><br> <br> <br><b>About the Job </b> <br><p>To become a strategic professional within our team, while utilizing your experience in building and managing client relationships, across the region. Your focus will be on developing new relationships, to onboard new clients while maintaining and servicing a portfolio, through excellent communication, negotiation and customer service.</p><br><br> <br> <p><strong>Responsibilities </strong></p><br><br> <ul> <li>Creation of strategic plans for revenue generation and business development while driving the Digital Agenda.</li> <li>Generate new business to achieve defined targets in terms of the number of customers, volumes and revenue, including product mix, active/ passive ratio, liability targetsAbo, transactions.</li> <li>Induction of all (NTB) new customers brought in by the Branches &amp; Direct Sales team.</li> <li>Creation of sales call plans to acquire large prospective customers through referrals.</li> <li>Update &amp; maintain all Sales MIS (Calls, Prospects, Attritions, Business done, etc.)</li> <li>Effectively meeting customer expectations and handling/ reduction of customer complaints while providing professional customer service to achieve a high percentage of customer satisfaction and retention.</li> <li>Lead through example and build the appropriate culture and values. Set appropriate tone and expectations for your team and work in collaboration with risk and control partners.</li> <li>Ensure KYC/AML updates, proper zero error documentation.</li> <li>To be able to detect any suspicious transactions, Money laundering, forgeries etc.</li> <li>Highest compliance with reference to Anti Bribery, Anti Money Laundering &amp; Combating Financial Crime Risk procedures.</li> <li>Obtain Security &amp; Commodity Authority (SCA) license (within 6 months of joining) and timely completion of Continuous Program Development (CPD) requirement post SCA licensing. This is a mandatory requirement for the role.</li> </ul><br><b>Our Ideal Candidate</b> <br><ul> <li>Experienced Sales and Relationship Manager with background in handling all Banking &amp; Investment Products.&nbsp; Strong communication and negotiation skills with the ability to influence outcomes.</li> <li>Networking ability to manage interdepartmental deliverables.</li> <li>Strong inter-personal skills and leadership ability, which encourages and promotes enthusiasm and team spirit.</li> <li>Good understanding of the business environment in UAE preferably with direct contacts with the local HNI community.</li> <li>Adapting to multi-cultural environment.</li> <li>In-depth knowledge of capital markets and financial planning</li> <li>SCA certified (or completion of certificate within 6 months)</li> </ul> <br> <br><p><span><strong>Risk Management</strong></span><br><span>• &nbsp; &nbsp;Ensure KYC/AML updates, proper zero error documentation.</span><br><span>• &nbsp; &nbsp;Updating the C – Manager, adhering to the Contact Management Plan.</span><br><span>• &nbsp; &nbsp;Ensure full awareness of all policies and procedures issued in relation to money laundering prevention and KYC.</span><br><span>• &nbsp; &nbsp;Ensure compliance with the above policies on an ongoing basis and reported any suspicious transaction immediately to the supervising officer.</span><br><span>• &nbsp; &nbsp;Ensure full awareness of all policies relating to operational risk, sales processes, anti-misselling, etc and comply with the same.</span><br><span>• &nbsp; &nbsp;Read, understand and comply with all provisions of the Group Code of Conduct.</span></p><br><br> <p><strong><span>Governance&nbsp;</span></strong><br><span>• &nbsp; &nbsp;To be able to detect any suspicious transactions, Money laundering, forgeries etc&nbsp;</span><br><span>• &nbsp; &nbsp;Highest compliance with reference to Anti Bribery, Anti Money Laundering &amp; Combating Financial Crime Risk procedures.&nbsp;</span><br><span>• &nbsp; &nbsp;Ensure all GPS standards are followed and adhered.</span></p><br><br> <p><strong><span>Regulatory &amp; Business Conduct&nbsp;</span></strong><br><span>• &nbsp; &nbsp;Display exemplary conduct and live by the Group’s Values and Code of Conduct.&nbsp;</span><br><span>• &nbsp; &nbsp;Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.</span><br><span>• &nbsp; &nbsp;Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.</span><br><span>• &nbsp; &nbsp;Good knowledge groups policies, standards, local regulations and legislations of the prevention of money laundering and adherence to group code of conduct.</span><br><span>• &nbsp; &nbsp;Obtain Security &amp; Commodity Authority (SCA) license and timely completion of Continuous Program Development (CPD) requirement post SCA licensing. This is a mandatory requirement for the role.</span></p><br><br><b>About Standard Chartered</b> <br><p>We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.<br>&nbsp;<br>Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.<br>&nbsp;<br>Together we:<br>&nbsp;<br>Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do<br>Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well<br>Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term</p><br><br><b>What we offer</b> <br><p>In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.<br>&nbsp;<br>Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.<br>Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.<br>Flexible working options based around home and office locations, with flexible working patterns.<br>Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits<br>A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.<br>Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.</p><br><br> </div>