Automotive Engineer Jobs in UAE

<p>Responsibilities:</p><p>Rotor Fitter will be responsible to:</p><ol><li><p>Perform refurbishment activities on gas Turbine rotors, including:</p></li></ol><p>o Rotor Disassembly / De-stacking.</p><p>o Maintain measurement records during rotor de-stacking.</p><p>o Rotor Reassembly / Re-stacking</p><p>o Rotor Bolts stretching.</p><p>o Maintain measurement records during rotor re-stacking.</p><ol><li><p>Perform GT rotors blading work (compressor & turbine section).</p></li><li><p>Perform correction of defects on rotor parts per inspection reports & engineering recommendation.</p></li><li><p>Perform refurbishment activities on Steam Turbine rotors & Diaphragms, per engineering disposition/ Fitter scope.</p></li><li><p>Perfom de-stacking & re-stacking of compressor rotors, under workshop supervisor lead.</p></li><li><p>Perform On-site Gas Turbine rotor blading work.</p></li><li><p>Overhauling of centrifugal pumps.</p></li><li><p>Coordinate with Workshop supervisor to ensure all assigned refurbishment works are carried out according to company's specifications for quality.</p></li><li><p>Comply with the company & UAE work place regulations.</p></li><li><p>Comply with QMS & HSE company policy & procedures.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>Diploma of Associate Engineering, Mechanical or equivalent</p><p>8+ years of total experience</p><p>Fluency in business English is required.</p>

<ul><li><p>Supervise and monitor all finishing works, including plastering, painting, tiling, flooring, ceilings, doors, windows, and other architectural works.</p></li><li><p>Coordinate with subcontractors, consultants, architects, and site teams.</p></li><li><p>Ensure finishing works are completed according to approved drawings and project specifications.</p></li><li><p>Conduct regular site inspections and ensure high-quality workmanship.</p></li><li><p>Identify and resolve construction defects and coordinate snagging and rectification works.</p></li><li><p>Monitor project progress and ensure finishing activities are completed on schedule.</p></li><li><p>Prepare daily/weekly progress reports and coordinate material requirements.</p></li><li><p>Assist with final inspections, snagging, and project handover.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree or Diploma in *Civil Engineering / Construction Engineering* or a related field.</p></li><li><p>Minimum *2 years of relevant experience* in finishing works, preferably within the UAE.</p></li><li><p>*Male candidate preferred.*</p></li><li><p>*Arabic speaker required.*</p></li><li><p>*Valid UAE driving license is mandatory.*</p></li><li><p>Strong knowledge of construction finishing materials and methods.</p></li><li><p>Ability to read and understand architectural and engineering drawings.</p></li><li><p>Good communication, coordination, and problem-solving skills.</p></li><li><p>Ability to work independently and manage site activities effectively.</p></li></ul>

<p>1. To involve in the planning and design of mechanical engineering works for building services, from concept design stage till detailed design, tender and authority submissions. 2. To conduct feasibility studies, technical assessments and work programme for mechanical engineering systems. 3. To prepare tender documents, design drawings and technical specifications for tenders, as well as supervise the construction, installation and testing & commissioning of mechanical works. 4. To collaborate with peers of other disciplines in feasibility studies and design, as well as ensure excellent delivery of service to clients. 5. Competency in building regulations and industry best practices. 6. Any relevant tasks as and when assigned by supervisor.</p><p>1. University degree in Mechanical Engineering or equivalent 2. Proficient in BIM (Revit), Autodesk software, any other software required by the industry 3. Proficient in Microsoft Office applications 4. Possess good interpersonal skills and a team player 5. A hands-on person who is positive, proactive and driven 6. Meticulous and able to organize work effectively</p>

<ol><li><p>Identify and pursue new business opportunities across construction companies, architectural firms, lead consultants, and end users</p></li><li><p>Build and maintain long term relationships with key stakeholders across the GCC and MENA markets</p></li><li><p>Develop and execute strategies to expand FSK's client base and market presence</p></li><li><p>Represent FSK & Partners at industry events, client meetings, and networking opportunities</p></li><li><p>Collaborate with internal engineering and technical teams to align proposals with client requirements</p></li><li><p>Track market trends, competitor activity, and emerging opportunities within the engineering consultancy space</p></li><li><p>Prepare and present business development reports and pipeline updates to management</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Minimum 10 years of experience in business development within the construction, architecture, or engineering consultancy sector</p></li><li><p>Existing client base of construction companies, architectural firms, lead consultants, and end users across the GCC and MENA markets</p></li><li><p>Strong network and relationships within the regional construction and consultancy industry</p></li><li><p>Excellent communication, negotiation, and presentation skills</p></li><li><p>Based in Dubai, with the ability to travel across the region as required</p></li><li><p>Available for immediate joining</p></li></ol>

<ul><li><p>Conduct land and engineering surveys for road, infrastructure, and earthwork projects.</p></li><li><p>Operate Leica GPS, Total Station, Auto Level, and other surveying instruments.</p></li><li><p>Perform setting out for roads, utilities, drainage, kerbs, and other infrastructure works.</p></li><li><p>Carry out topographic, route, and as-built surveys.</p></li><li><p>Establish survey control points and benchmarks.</p></li><li><p>Verify levels, alignments, and coordinates according to approved drawings.</p></li><li><p>Prepare survey reports, field notes, and coordinate calculations.</p></li><li><p>Coordinate with site engineers to ensure accurate execution of works.</p></li><li><p>Ensure compliance with project specifications and safety standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or Bachelor’s degree in Surveying, Geomatics, Civil Engineering, or a related field.</p></li><li><p>Minimum 1 years of experience in roads, infrastructure, and earthwork projects.</p></li><li><p>Hands-on experience with Leica GPS, Total Station, and Auto Level.</p></li><li><p>Strong knowledge of setting out and survey control for infrastructure works.</p></li><li><p>Ability to read engineering drawings and survey plans.</p></li><li><p>Familiarity with AutoCAD and MS Office (Civil 3D is an advantage).</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Immediate joiners or candidates available within 10 days are preferred.</p></li></ul>

<ul><li><p>Conduct land and engineering surveys for road, infrastructure, and earthwork projects.</p></li><li><p>Operate Leica GPS, Total Station, Auto Level, and other surveying instruments.</p></li><li><p>Perform setting out for roads, utilities, drainage, kerbs, and other infrastructure works.</p></li><li><p>Carry out topographic, route, and as-built surveys.</p></li><li><p>Establish survey control points and benchmarks.</p></li><li><p>Verify levels, alignments, and coordinates according to approved drawings.</p></li><li><p>Prepare survey reports, field notes, and coordinate calculations.</p></li><li><p>Coordinate with site engineers to ensure accurate execution of works.</p></li><li><p>Ensure compliance with project specifications and safety standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or Bachelor’s degree in Surveying, Geomatics, Civil Engineering, or a related field.</p></li><li><p>Minimum 1 years of experience in roads, infrastructure, and earthwork projects.</p></li><li><p>Hands-on experience with Leica GPS, Total Station, and Auto Level.</p></li><li><p>Strong knowledge of setting out and survey control for infrastructure works.</p></li><li><p>Ability to read engineering drawings and survey plans.</p></li><li><p>Familiarity with AutoCAD and MS Office (Civil 3D is an advantage).</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Immediate joiners or candidates available within 10 days are preferred.</p></li></ul>

<ul><li>Develop detailed 3D models of civil and structural elements, including foundations, steel structures, and concrete components, ensuring adherence to design specifications and industry standards.</li><li>Create and maintain accurate SP3D models, integrating architectural, mechanical, and electrical designs to ensure clash-free environments and constructability.</li><li>Generate comprehensive 2D drawings, including plans, elevations, sections, and details, directly from the 3D model for construction use.</li><li>Perform clash detection and resolution using SP3D tools, proactively identifying and addressing potential conflicts between disciplines to prevent costly rework.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree or Diploma in Civil Engineering, Structural Engineering, or a related technical field.</li><li>Minimum of 3-5 years of hands-on experience as an SP3D Modeler, with a strong focus on civil and structural projects.</li><li>Proficiency in SmartPlant 3D (SP3D) software, including advanced modeling, drawing generation, and clash detection functionalities.</li><li>Solid understanding of civil and structural engineering principles, construction methods, and relevant codes (e.g., AISC, ACI, Eurocodes).</li></ul>

<ul><li>Conduct thorough visual and dimensional inspections of static equipment (e.g., pressure vessels, tanks, heat exchangers) to ensure compliance with design specifications and industry codes.</li><li>Perform detailed inspections on rotating equipment (e.g., pumps, compressors, turbines) during manufacturing, installation, and operational phases, identifying defects and deviations.</li><li>Interpret engineering drawings, P&IDs, and technical specifications to verify the accuracy and quality of fabricated and installed equipment.</li><li>Utilize Non-Destructive Testing (NDT) methods like radiography, ultrasonic testing, and magnetic particle testing to assess material integrity and detect subsurface flaws.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possess a Bachelor's degree in Mechanical Engineering or a related technical field, demonstrating a strong foundational understanding of mechanical principles.</p></li><li><p>Have a minimum of 6+ years of hands-on experience in quality control inspection of static and rotating equipment within the oil & gas, petrochemical, or power generation industries.</p></li><li><p>Proficient in interpreting complex engineering drawings, P&IDs, isometric drawings, and relevant international codes (e.g., ASME B3, ASME VIII, API standards).</p></li></ul>

<ul><li><p>Conduct land and engineering surveys for road, infrastructure, and earthwork projects.</p></li><li><p>Operate Leica GPS, Total Station, Auto Level, and other surveying instruments.</p></li><li><p>Perform setting out for roads, utilities, drainage, kerbs, and other infrastructure works.</p></li><li><p>Carry out topographic, route, and as-built surveys.</p></li><li><p>Establish survey control points and benchmarks.</p></li><li><p>Verify levels, alignments, and coordinates according to approved drawings.</p></li><li><p>Prepare survey reports, field notes, and coordinate calculations.</p></li><li><p>Coordinate with site engineers to ensure accurate execution of works.</p></li><li><p>Ensure compliance with project specifications and safety standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or Bachelor’s degree in Surveying, Geomatics, Civil Engineering, or a related field.</p></li><li><p>Minimum 1 years of experience in roads, infrastructure, and earthwork projects.</p></li><li><p>Hands-on experience with Leica GPS, Total Station, and Auto Level.</p></li><li><p>Strong knowledge of setting out and survey control for infrastructure works.</p></li><li><p>Ability to read engineering drawings and survey plans.</p></li><li><p>Familiarity with AutoCAD and MS Office (Civil 3D is an advantage).</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Immediate joiners or candidates available within 10 days are preferred.</p></li></ul>

Document Controller<br>We are seeking a highly organized and detail-oriented Document Controller to support our Oil & Gas EEPC operations across the UAE. The successful candidate will be responsible for preparing, processing, and managing government-related documentation through official UAE portals and ERP systems while ensuring full compliance with regulatory requirements and company procedures.<br>This role requires strong knowledge of UAE government processes, excellent Arabic and English typing skills, and the ability to coordinate effectively with internal stakeholders, government entities, and finance teams.<br>WHO WE ARETarget Engineering brings 50+ years of experience in EPC and industrial infrastructure. With in-house fabrication, marine expertise, and multidisciplinary capability, we deliver projects with scale, confidence, and care.<br>WHY JOIN USAt Target Engineering, you’ll work on large-scale energy, marine, and civil infrastructure projects. Join a business with deep technical roots, where your voice is heard, your impact is visible, and your career is part of a legacy of excellence.<br>YOUR ROLEAs Document Controller, you will<br>Visa & Immigration Documentation Process new employment visa applications and renewals through GDRFA and ICP/ICA portals. Handle visa status amendments, transfers, and cancellations. Coordinate with HR and PRO teams to ensure timely completion of immigration requirements. Ensure compliance with UAE immigration regulations and documentation standards.<br>Medical Fitness & Emirates ID Processing Submit medical fitness applications through SEHA and DHA portals. Prepare and process Emirates ID applications and appointment scheduling through ICP. Coordinate employee biometric appointments and document collection.<br>Traffic Department & Vehicle Documentation Process vehicle registration, renewal, transfer, and traffic-related NOCsCoordinate with RTA and other transport authorities across the UAE. Maintain accurate records of all vehicle-related submissions.<br>MOHRE & Labour Documentation Prepare labour contracts, work permits, offer letters, and quota applications. Process employee records, renewals, and labour-related documentation through MOHRE systems. Ensure adherence to UAE labour laws and regulatory requirements.<br>Regulatory & Corporate Documentation Prepare documentation for DED, Municipality, Chamber of Commerce, and other government authorities. Maintain establishment cards, licenses, registrations, and related records.<br>Arabic & English Typing Services Accurately prepare and submit government forms in Arabic and English. Support translation of standard documents where required. Ensure professional formatting and document accuracy.<br>ERP Documentation & Finance Coordination Maintain accurate records in ERP and document management systems. Process and track documentation related to visas, Emirates IDs, labour contracts, and other governmental transactions. Submit government-related invoices to the Finance Department in accordance with management instructions. Maintain complete digital and physical records of all transactions.<br>Reporting & Stakeholder Coordination Generate periodic reports on visa, labour, medical, and licensing activities. Safeguard confidential employee and company information. Serve as a liaison between HR, PROs, employees, and government authorities. Provide timely updates and support regarding government processes and requirements.<br>WHAT WE’RE LOOKING FOR<br>Experience Must have 2-4 years of experience in UAE government documentation, typing, or PRO support roles Experience within Oil & Gas, Engineering, Construction, Industrial, or EEPC environments is highly preferred Experience with ERP systems such as Oracle, SAP, or equivalent platforms<br>Education and Certifications High School Certificate (Mandatory) Diploma or Bachelor's Degree (Preferred)<br>Skills and Competencies Strong attention to detail and accuracy Excellent organizational and record-keeping skills Ability to manage multiple deadlines simultaneously Professional communication and stakeholder management skills Commitment to confidentiality and regulatory compliance<br>WHAT WE OFFER <br>The chance to contribute to some of UAE’s Oil and Gas EPC Mega projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression. Competitive salary and benefits package.<br>Ready to be part of our team? If you’re inspired by what you’ve read and believe you’re the right fit, we’d love to hear from you.<br>Join Target Engineering and Construction Co. LLC and play a pivotal role in shaping a high-performing team that drives our success.<br>Apply today and be part of something excellent!

<p>We are seeking a Senior Project Manager to lead construction and development projects concurrently in Dubai, UAE and India. The successful candidate will assume full responsibility for end-to-end project delivery — from project initiation, feasibility and design through procurement, construction, commissioning, handover and close-out — delivering the required programme, budget, quality, safety and regulatory-compliance outcomes. The position involves working in an international, multicultural environment with overseas clients, consultants and contractors, as well as coordinating projects outside the candidate’s country of residence. Demonstrable international project experience is a mandatory requirement. </p><p><strong>Desired Candidate Profile</strong></p><p>Key Responsibilities</p><p>Project Delivery</p><p>Lead projects through the full lifecycle—from initiation and feasibility to design, procurement, construction, commissioning, handover and close-out—ensuring safe, on-time, on-budget delivery to the required quality standards.</p><p>Develop and manage project execution strategies, master programmes, budgets, milestones and critical paths. Monitor progress, control schedule and cost variances, and ensure compliance with approved designs, specifications, technical requirements and project objectives.</p><p>Design, Procurement & Contracts</p><p>Coordinate multidisciplinary teams including architecture, interiors, structural and MEP disciplines, resolving design issues and implementing value engineering where appropriate.</p><p>Develop procurement and contract strategies, appoint consultants, contractors and suppliers, administer contracts, manage procurement packages and oversee commercial performance throughout the project lifecycle.</p><p>Review contractor payment applications, evaluate change requests, Extension of Time (EOT) claims and commercial variations, applying FIDIC and/or NEC contract principles.</p><p>Risk, Governance & Stakeholder Management</p><p>Maintain project governance, reporting and the Risk Register, identifying and mitigating risks proactively.</p><p>Act as the primary interface between clients, consultants, contractors and authorities, ensuring effective communication, timely decision-making and alignment of all stakeholders.</p><p>Chair project meetings, conduct regular site inspections in Dubai and India, monitor construction progress and provide senior management with clear reporting on programme, budget, quality, risks and key decisions.</p><p>Quality, HSE & Project Close-Out</p><p>Ensure compliance with HSE, QMS and ESG requirements throughout project delivery, including sustainability, energy efficiency and LEED or Net Zero objectives where applicable.</p><p>Manage inspections, snagging, testing, commissioning, handover and project close-out documentation.</p><p>Candidate Requirements</p><ul><li><p>12–15+ years' experience as a Senior Project Manager, Project Director or equivalent, including at least 4–5 years in senior leadership roles.</p></li><li><p>Proven delivery of full-lifecycle construction or development projects valued at USD 100M+ / AED 500M+.</p></li><li><p>Experience delivering premium residential, hospitality, mixed-use or luxury fit-out developments.</p></li><li><p>Bachelor's degree in Civil Engineering, Construction, Architecture or Project Management (Master's degree preferred).</p></li><li><p>Strong expertise in project planning, budgeting, procurement, contract administration, commercial management, quality assurance, multidisciplinary coordination and risk management.</p></li><li><p>Ability to review architectural, engineering and construction documentation.</p></li></ul><p>Mandatory International Experience</p><p>Candidates must demonstrate:</p><ul><li><p>successful delivery of international projects;</p></li><li><p>experience working with international clients, consultants and contractors;</p></li><li><p>project management outside their country of residence;</p></li><li><p>leadership within multicultural international teams.</p></li></ul><p>As the role covers projects in both Dubai and India simultaneously, international experience is mandatory.</p><p>Preferred Qualifications</p><ul><li><p>Experience with leading developers, contractors or consultants such as Emaar, DAMAC, Sobha, Aldar, AECOM, AtkinsRéalis, Turner & Townsend or Mace.</p></li><li><p>Knowledge of UAE and/or Indian construction regulations and project delivery practices.</p></li><li><p>Professional certifications such as PMP, PRINCE2, MRICS, MCIOB or APM.</p></li><li><p>Experience using Primavera P6, MS Project, BIM and CDE platforms.</p></li></ul><p>Leadership & Technical Competencies</p><p>Strong leadership of multidisciplinary international teams, strategic thinking, commercial awareness, negotiation and stakeholder management skills.</p><p>Proven capability in project controls, governance, procurement, contract administration, change management, claims, cost control, value engineering, MEP coordination, HSE, ESG, QMS, BIM/CDE and project scheduling.</p><p>Languages</p><p>Fluent English is essential. Russian, Hindi or Arabic would be advantageous.</p><p>Travel</p><p>Willingness to travel regularly between Dubai and India and work across multiple time zones is essential.</p><p>Success Criteria</p><p>Successful delivery of projects within approved budget, programme and quality standards while maintaining effective control of HSE, ESG, procurement, contracts, risks and stakeholder relationships.</p><p>Provide management with accurate, timely reporting and ensure effective coordination between clients, consultants, contractors and authorities.</p><p>How to Apply</p><p>Please submit:</p><ul><li><p>CV;</p></li><li><p>list of completed projects, including your role, project value, location (clearly identifying international projects) and outcomes;</p></li><li><p>expected salary;</p></li><li><p>current location;</p></li><li><p>confirmation of willingness to travel to Dubai and India.</p></li></ul><p><strong>Applications without an expected salary will not be considered.</strong></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>We are currently seeking a Senior S3D tool administrator, reporting directly to <i>the Head of the Department</i> to join our team based in <i>UAE, Abu Dhabi</i>.</span></p><br><p><span><strong>About us:</strong></span></p><br><p><span>Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.</span></p><br><p><span>Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.</span></p><br><p><span><strong>About the mission we offer you:</strong></span></p><br><p>Job purpose:</p><br><p>Primarily concerned with S3D Installation Setup / Customization / Management / Training etc.,</p><br><p>Reporting lines and interactions:</p><br><p>Hierarchically reports to: ADPES HOD</p><br><p>Operationally reports to: Project Engineering Manager / IM Manager</p><br><p>Directly supervises: -</p><br><p>Key interactions (internally, externally):</p><br><p>• All SP Tool Administrators / Discipline Leads involved in an FEED/EPC project / Doc. Contr. / IM Manager</p><br><p>• Client</p><br><p>Job scope (budget, management, specific criteria):</p><br><p>Work as S3D administrator in FEED/EPC projects</p><br><p>Typical background and experience required:</p><br><p>Must have:</p><br><p>• Engineering degree</p><br><p>• Experience in S3D Administration &amp; Customization</p><br><p>• Experience in customizing S3D using Dot Net Programming ( VB, c# )</p><br><p>• Knowledge of Engineering data flow in a multi-discipline FEED / EPC Project.</p><br><p>• FEED / EPC Work experience in similar role – 13 to 16 years</p><br><p>• Knowledge on</p><br><p>o Pipe Support Customization – Visual Studio</p><br><p>o Symbol Customization – Visual Studio</p><br><p>o Drawing / Report / Label customization</p><br><p>o Working with Smartplant Foundation – Retrieve/correlate/publish</p><br><p>Nice to have:</p><br><p>• Management</p><br><p>• Experience in Oil and Gas Business</p><br><p>• Knowledge of Smart P&amp;ID and other Engineering Tools</p><br><p>• AVEVA E3D</p><br><p>Main Accountabilities:</p><br><p>The S3D Administrator is in charge of:</p><br><p>· Installation of S3D Application Server &amp; Client</p><br><p>· Create / Customize / Administer the S3D Site/Plant/Catalog</p><br><p>· Configuring Batch Server, Name Generator, IFC server &amp; clash rules, Rule checker service etc.,</p><br><p>· Configure Global Works share / Citrix setup for S3D</p><br><p>· Multi-discipline Catalog creation, symbol customization, Custom Name Rules</p><br><p>· S3D multi-discipline Support Library customization using Visual Studio</p><br><p>· Deliverable customizations (multidiscipline layout drawings, iso &amp; custom reports)</p><br><p>· Multi-Discipline S3D User Support &amp; Training</p><br><p>· Support setup of SPF Integrated Environment as per project requirement</p><br><p>· Prepare the required project procedures based on Client/Project requirement</p><br><p>· Creation of PBS as per SPF or client requirement, defining and creating discipline wise hierarchy to suit project and Client requirement</p><br><p>· All Customizations and Configurations required for S3D</p><br><p>· Publish &amp; Retrieve to and from the S3D/SPID &amp; SPF</p><br><p>· Support to users in Publishing from S3D &amp; Retrieving into S3D</p><br><p>· Support to user in Correlation issues</p><br><p>· Prepare 3D Model review dataset &amp; Take part in Client Review Meetings</p><br><p>· Interface with IT / Hexagon for all S3D related issues</p><br><p>· Handle COMPANY Audits and Data handover to Client.</p><br><p><span><i>Starting Date: ASAP</i></span></p><br><p><span><strong>About you:</strong></span></p><br><p><span>We love to hear from you and how you match with this position. To be successful in this mission you should consider the following requirements:</span></p><br><p><span>Qualifications: Bachelors or Diploma</span></p><br><p><span>Languages: <i>English + proficiency level (Basic, Professional, Fluent)</i></span></p><br><p><span>Main skills: <i>(up to 4)</i></span></p><br><p><span><strong>Your career with us&nbsp;</strong></span></p><br><p><span>Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T. EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.</span></p><br><p><span><strong>What’s Next?</strong></span></p><br><p><span>Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with a reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.&nbsp;</span></p><br><p><span>We invite you to get to know more about our company by visiting&nbsp;</span><span>www.ten.com</span><span>and follow us on&nbsp;</span><span>LinkedIn</span><span>,&nbsp;</span><span>Instagram</span><span>,&nbsp;</span><span>Facebook</span><span>,&nbsp;</span><span>X</span><span> and&nbsp;</span><span>YouTube</span><span>&nbsp;for company updates.</span></p><br><br> </div>

<ul><li>Prepare detailed Operations & Maintenance Manuals for Gas Treatment and Hydrocarbon Processing Plants.</li><li>Review and interpret engineering deliverables including PFDs, P&IDs, Process Descriptions, Cause & Effect Charts, Control Narratives, Equipment Datasheets, Vendor O&M Manuals, and Utility Philosophies.</li><li>Develop structured O&M documentation covering Plant Overview, Process Description, Operating Procedures, Start-up & Shutdown Procedures, Emergency Operations, Troubleshooting Guidelines, Safety Precautions, Maintenance Philosophy, and Equipment Maintenance Procedures.</li><li>Coordinate with Process, Mechanical, Electrical, Instrumentation, and Operations teams for technical inputs and clarification.</li><li>Ensure all manuals comply with project specifications, company standards, client templates, and industry best practices.</li><li>Participate in technical review meetings and incorporate client comments into final deliverables.</li><li>Support preparation of commissioning and operational readiness documentation where required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Additional certifications or training in Process Operations, Commissioning, or Technical Documentation preferred.</li><li>Prior experience working with major international Oil & Gas companies and EPC organizations across Middle East, USA, and North America regions.</li><li>Direct exposure to gas processing projects, commissioning support, operational readiness documentation, and multinational project execution environments preferred.</li><li>Excellent English verbal and written communication skills.</li><li>Strong technical writing and documentation capabilities.</li><li>Good vocabulary and ability to prepare clear, structured, and professional technical documents.</li><li>Ability to work independently in remote execution environment while coordinating with global project teams.</li><li>Knowledge of Microsoft Word, Microsoft Excel, Adobe PDF tools, Document Management Systems, SmartPlant / Engineering Document Platforms, and basic understanding of 3D model review tools (Navisworks preferred).</li></ul>

<p>Should have a specialized engineering card with 7+ years of experience</p><p><strong>Desired Candidate Profile</strong></p><p>should have a specialized engineering card with 7+ experience </p>

<strong>About Us<br><br></strong>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.<br><br><strong>General Purpose of Role<br><br></strong>Determines methods and solutions for complex engineering problems and selects the most efficient and economical manner for meeting objectives. Applies advanced engineering techniques and analysis. Is fully conversant in the profession and proficient in the utilization of current engineering theories and practices. May serve as a technical consultant in an area of specialty. May provide discipline supervision for one larger or one or more smaller projects.<br><br>Senior level position with advanced knowledge and a specialized depth or breadth of expertise, gaining a mastery of a single areas or multiple broader areas of specialty, product, and systems. May include team leadership role as well as project and discipline related administrative responsibilities.<br><br><strong>Key Accountabilities<br><br></strong><strong>Business Development Support<br><br></strong><ul><li>Assists business development activities by maintaining an up to date personal profile and resume. Builds positive working relationships with external parties such as the customer, suppliers, and contractors. Supports proposals by developing the discipline execution strategy, estimating costs, writing proposal content, and presenting to customers. May be called upon to lead all or part of the technical proposal.<br><br></li></ul><strong>Business Operations<br><br></strong><ul><li>Supports the business by communicating team resource loading and skill requirements to a direct supervisor or Discipline Manager. Ensures the project work is covered for vacation and unplanned absences. Mentors/trains and supports the delivery of training. Assists in the employee performance review process . Facilitates coverage of activities when people leave the team. Encourages knowledge of and compliance with requirements and processes. Works to resolve inter-discipline, vendor, and customer issues. Ensures discipline technical work and team activities meet all health, safety, environmental, and security requirements.<br><br></li></ul><strong>Technical Competency<br><br></strong><ul><li>Ensures team member adherence to generally accepted engineering and design practices, regulatory requirements, and customer specifications. Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Supports checking, peer reviews, and incorporation of comments and findings.</li><li>Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment. </li><li>Expert knowledge in design &amp; selection of Rotating equipment for onshore and onshore oil &amp; gas projects of comparable complexity and value is essential. </li><li>Experience in Concept, FEED and Detailed Design, procurement of equipment and management of third parties is preferred.</li><li>Participation in projects in Middle East is preferred.</li><li>Expert knowledge in pressure vessel design code ASME VIII and manufacture requirements such as PWHT requirements, NDE requirements, material of construction, nozzle details, nozzle loads, code of construction, fireproofing requirement, painting, insulation, wind loads, seismic loads, equipment interface, thickness analysis and other assessments.</li><li>Manage the development of equipment specifications for static equipment such as tanks, pressure vessels, heat exchangers, Air fin coolers and other process packages etc., </li><li>Must have an advanced understanding of their controls, power supply, utility requirements, environmental regulation requirements. </li><li>Advanced understanding of metallurgy specifications in accordance with process requirements and manage the development of Mechanical Datasheets. Complete checking and reviewing of deliverables to ensure their quality. Ensure compliance to company procedures and processes and support technical peer reviews.</li><li>Conduct document checking and design verification tasks for compliance to company and project specifications.</li><li>Conduct interdisciplinary coordination activities.</li><li>Demonstrate capability to actively engage in client workshops covering design review, HAZID, HAZOP, constructability, sustainability, reliability, quality reviews etc.</li><li>Has experience in discipline Basis of Design development and equipment selection philosophy.</li><li>Should have knowledge of other international codes and standards, statutory and regulatory requirements and a good understanding of onshore / onshore engineering practices applicable to mechanical static equipment engineering design for oil and gas / refinery / petrochemical facilities.</li><li>Extensive knowledge of procurement support and package management for equipment purchase. The candidate shall demonstrate knowledge in typical engagement covering manufacturer ITP, sub-supplier order, material certification, welding, NDE and testing procedures, manufacture hold points, stage payment, FAT and inspection release. </li><li>Previous experience and competence in completing site visit to client site, information gathering and lision with client representative.<br><br></li></ul><strong>Project Execution<br><br></strong><ul><li>May participate in project execution strategy and planning. Knows the project and discipline scope/cost/time requirements, assists the team to meet expectations, and coordinates with other disciplines to ensure project success. Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, drives and participates in squad checking, recommends improvements, and takes action where required.<br><br></li></ul><strong>Project Deliverables<br><br></strong><ul><li>Gathers data from multiple sources and prepares engineering studies, analyses, calculations, etc. Crafts recommendations and creates final documentation. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. May review similar documentation to assist others and reviews/authorizes work done by direct reports.<br><br></li></ul><strong>Procurement Support<br><br></strong><ul><li>Incorporates information from multiple sources into equipment/material specifications, data sheets, testing requirements, and material requisitions. Participates in bid clarifications, conducts bid evaluations, completes inter-discipline vendor information review and approval, and finalizes other certification activities. Reviews similar documentation to assist others and reviews/authorizes work done by direct reports.<br><br></li></ul><strong>Site Support<br><br></strong><ul><li>Seeks input from knowledgeable sources, participates in constructability, operability, and maintainability reviews, and ensures that requirements are incorporated into engineering/design. Works with site personnel to resolve issues. May create plans or documents that supports construction, testing, commissioning, operations, maintenance, or decommissioning. May provide or lead on-site support for construction, commissioning, or turn over.<br><br></li></ul><strong>Qualifications, Accreditation, Training (Essential)<br><br></strong><ul><li>Awarded a 4 or 5 year technical degree in science or engineering. Trained in leadership and project execution. Will be actively licensed with a local engineering governing body where required by law.<br><br></li></ul><strong>Qualifications, Accreditation, Training (Desirable)<br><br></strong><ul><li>Training in risk management or quality.<br><br></li></ul><strong>Job Specific Knowledge / Experience (Essential)<br><br></strong><ul><li>Typically has 15+ years of relevant discipline experience. Has a strong background in discipline work and a strong understanding of regulations, codes, manufacturing standards, and industry standard practices. Skilled in estimating project costs and writing proposal content.<br><br></li></ul><strong>Job Specific Knowledge / Experience (Desirable)<br><br></strong><ul><li>Experience working in project leadership. Specialized expertise in one or more areas of regulations, codes, manufacturing standards, and industry standard practices.<br><br></li></ul><strong>Decision Making <br><br></strong><ul><li>Empowered to make responsible decisions within the limits of company practices. Difficult, complex or unusual decisions will be referred to the Location Manager of Engineering or Discipline Manager.<br><br></li></ul><strong>Supervision Received<br><br></strong><ul><li>Works with self-initiated interaction with supervisor and self-initiated technical guidance. Influence over duties. Work is assigned only in terms of broad objectives to be accomplished, and is reviewed for policy, soundness of approach and general effectiveness. Work is reviewed to ensure conformity with policy and for coordination of other company departments.<br><br></li></ul><strong>Supervision Authority<br><br></strong><ul><li>Typically up to 10 direct reports consisting of less senior engineers and designers within the same discipline but could include total team size much greater than this with supporting coordination. Reviews work for technical accuracy and adequacy. Plans, controls &amp; reports on project work. May have authority for performance evaluations impacting pay. May make recommendations concerning selection, training, rating and discipline of staff.<br><br></li></ul><strong>Communication<br><br></strong><ul><li>Seasoned ability to inform and persuade on complex matters comes from recognition of discipline mastery. Utilized on the most complex and difficult problems.<br><br></li></ul><strong>Systems &amp; Tools (Essential)<br><br></strong><ul><li>Competent in Microsoft Outlook, Word, Excel, and Teams. Can navigate intranet pages, conduct searches, and retrieve information. Can organize information from many sources and retain as per the prescribed format and policies.<br><br></li></ul><strong>Systems &amp; Tools (Desirable)<br><br></strong><ul><li>Competent in Microsoft Access and PowerPoint. Able to touch type. Proficient in specialty engineering or design tools, analytics and modeling, and cross-discipline data centric methods.<br><br></li></ul><strong>HSE Capability<br><br></strong><ul><li>Assume hands-on management and implementation of all relevant company HSE requirements. Drive Safe and Sustainable engineering outcomes throughout the asset lifecycle via the application of SEAL. Role-model a commitment to personal well-being and a pro-active approach to continuously improving health, safety and environmental performance.<br><br></li></ul><strong>People Skills<br><br></strong><ul><li>Interpersonal: Builds appropriate, constructive, and effective business relationships throughout the organization; uses diplomacy and tact; is approachable; communicates clearly, accurately, and consistently both verbally and in written matters. Employs the principles of active listening and encourages feedback from others.</li><li>Teamwork: Enjoys working in a small high calibre team with high visibility to senior stakeholders. Able to work and liaise with multiple teams and stakeholders, able to prioritise workloads and help other team members to achieve team goals.</li><li>Action Orientation: Achieves results set by self and others, meets timelines, pushes to achieve stretch goals, and demonstrates enthusiasm, persistence and tenacity. Breaks down work into executable tasks. Acts accountable for work produced and ensures it is "right the first time.”</li><li>Intellectual Capacity: Deals with new concepts and complexity comfortably. Examines problems carefully and thoroughly and understands their interdependencies. Can pull information and ideas from many sources and see the importance of many factors.<br><br></li></ul><strong>Moving forward together<br><br></strong>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br><br>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

This position is for UAE Nationals only<br>Position Summary The Lab Specialist will support the delivery of the GENS 101 Grand Challenges course by providing technical expertise in mechatronics, robotics, embedded systems, rapid prototyping, and laboratory experimentation. Among other responsibilities, the role involves mentoring student teams during project development, maintaining laboratory equipment, ensuring safe laboratory operations, and supporting faculty during studio sessions. The successful candidate will help students design, build, test, and troubleshoot engineering prototypes while encouraging independent learning and innovation.<br>Key Responsibilities Student & Project Support Provide technical guidance for student projects involving robotics, embedded systems, sensors, electronics, and automation. Assist students with prototype design, fabrication, assembly, testing, troubleshooting, and system integration. Support experimental setup, data acquisition, calibration, and interpretation of results. Mentor students in applying the Engineering Design Process and Scientific Method without completing project work on their behalf. Laboratory Operations Prepare laboratories and equipment for teaching activities. Maintain, calibrate, and troubleshoot laboratory equipment and fabrication machines. Manage laboratory inventory, consumables, and equipment maintenance schedules. Ensure compliance with laboratory safety procedures and provide equipment training to students. Faculty Support Assist instructors during studio sessions and demonstrations. Support the development and testing of new laboratory activities. Recommend improvements to laboratory equipment and technical resources.<br>Education Bachelor’s degree in engineering or science with knowledge and practical experience relevant to interdisciplinary engineering design, mechatronics, robotics, embedded systems, and prototyping. Master's degree is preferred.<br>Technical Requirements<br>The successful candidate should have practical experience in:Embedded Systems: Arduino, ESP32, Raspberry Pi or similar microcontrollers. Robotics & Automation: Sensors, actuators, DC/servo motors, motor drivers, and basic motion control. Electronics: Circuit prototyping, soldering, PCB assembly, electronic troubleshooting, and instrumentation. Mechanical Design: CAD software (Solid Works, Fusion 360, Onshape, or similar) Digital Fabrication: 3D printing, laser cutting, CNC machining, and rapid prototyping. Programming: Arduino IDE, C/C++, and basic Python. Data Acquisition: sensor calibration, data collection. Desired Experience University engineering laboratories or makerspaces. Robotics, automation, or embedded systems projects. Student design competitions or project-based learning environments. Operation of digital fabrication equipment. Core Competencies Fluent in English (IELTS 7+) Strong troubleshooting and problem-solving skills. Excellent communication and mentoring abilities. Ability to work effectively with multidisciplinary student teams. Strong organizational and laboratory management skills. Commitment to safety, innovation, and continuous improvement. Preferred Equipment Experience Experience with some or all of the following is desirable:Arduino and embedded development kits Robotics platforms Electronic test equipment (multi-meters, oscilloscopes, power supplies) Sensors and data acquisition systems3D printers Laser cutter and CNC router Hand and power tools for prototyping

Job Role We are Azizi Developments, a leading Dubai-based developer and a passionate team driven by the goal of crafting exceptional homes and destinations for people living in the UAE. Our portfolio spans Dubai’s prime residential, hospitality, and commercial developments, reflecting our commitment to transparency, customer centricity, quality, integrity, and value creation through a construction-driven approach. With some of our exciting launches such as Burj Azizi (the second tallest tower in the world), Monaco Mansions and Azizi Venice – Dubai’s new luxurious Venetian-inspired waterfront community, we are rapidly expanding our team based in Dubai. As a Procurement Manager – Civil Consultancies, Structural and Enabling Works, you will be responsible for managing the end-to-end procurement process for civil consultancies, structural works, and enabling works packages across construction and infrastructure projects. You will ensure that procurement activities are executed efficiently, transparently, and in compliance with company policies while achieving the best value in terms of cost, quality, and timelines. The ideal candidate will have strong experience in construction procurement, consultant engagement, tender management, contract negotiations, vendor management, estimation, and commercial evaluation, with proven experience in high-rise building projects. Responsibilities Develop and implement procurement strategies for civil consultancies, structural works, and enabling works packages. Coordinate with Project Management, Design, Engineering, and other relevant departments to identify procurement requirements, package scope, and timelines. Prepare and maintain procurement schedules aligned with overall project timelines. Ensure all procurement activities comply with organizational procurement policies, procedures, and approval requirements. Identify, evaluate, and prequalify consultants, contractors, subcontractors, and service providers for civil, structural, and enabling works. Maintain a strong and competitive vendor database and ensure adequate market coverage for procurement packages. Develop and maintain long-term strategic relationships with key consultants, contractors, subcontractors, and suppliers. Monitor vendor and consultant performance and ensure compliance with contractual requirements. Procure a wide range of packages including main contractors, subcontractors, consultants, subconsultants, civil works, structural works, enabling works, and related materials and services. Manage the complete tendering process, including preparation of enquiries, issuance of tender documents, clarification of queries, commercial evaluation, negotiations, and recommendation for award. Review and evaluate technical and commercial submissions in coordination with relevant Engineering, Design, Project, and Commercial teams. Conduct market analysis and monitor market trends to identify competitive pricing and cost-saving opportunities. Negotiate commercial terms, rates, payment conditions, warranties, contractual terms, and other procurement requirements to achieve optimal value. Support project teams in budget control, cost planning, and procurement-related commercial activities for civil and structural works. Conduct value engineering, cost analysis, feasibility assessments, and other cost optimization activities where required. Liaise with Engineering, Design, Project Management, Legal, Finance, Commercial, and other internal departments to ensure smooth procurement execution. Ensure effective coordination between consultants, contractors, vendors, and internal stakeholders throughout the procurement lifecycle. Provide procurement and commercial support to project teams during project execution when required. Identify procurement risks and develop appropriate mitigation strategies. Ensure procurement contracts and agreements comply with applicable legal requirements, company policies, and approved procedures. Maintain complete and accurate procurement documentation, records, approvals, and audit trails. Proactively identify suitable providers for unfamiliar or specialized procurement requirements by thoroughly understanding technical requirements and conducting appropriate market research. Maintain open and effective communication with department heads, deputies, project teams, consultants, and vendors. Provide regular updates on the status of procurement packages, tenders, orders, negotiations, and awards. Ensure timely and effective email correspondence and follow-up on procurement activities. Demonstrate resilience, composure, and professionalism when handling multiple priorities, commercial negotiations, tight deadlines, and challenging situations. Support continuous improvement of procurement processes, systems, vendor management, and commercial practices. Requirements Bachelor’s Degree in Civil Engineering or a similar relevant field. Minimum 12 years of relevant experience in procurement, category management, construction procurement, or a similar position. Proven experience in high-rise building projects is mandatory. Strong experience in estimation, tendering, procurement, and commercial evaluation. Proven experience in procurement of civil consultancies, structural works, enabling works, contractors, subcontractors, and related construction packages. Strong knowledge of engineering procurement and construction procurement processes. Exceptional negotiation and commercial management skills. Strong understanding of market analysis, cost optimization, value engineering, and feasibility analysis. Ability to develop and maintain strong relationships with consultants, contractors, subcontractors, and suppliers. Strong vendor evaluation, prequalification, and performance management skills. Excellent organizational and coordination skills with the ability to manage multiple procurement packages simultaneously. Strong communication and interpersonal skills with the ability to work effectively with internal and external stakeholders. Excellent email communication and professional correspondence skills. Strong decision-making, problem-solving, and analytical abilities. Ability to work effectively in a collaborative and fast-paced construction environment. Strong resilience and ability to perform effectively under pressure. Strong compliance and process-oriented approach. Good understanding of ERP systems and procurement processes. Proficiency in MS Office. Knowledge of Auto CAD is an advantage. Experience in the construction industry is essential. Strong negotiation and conflict-resolution capabilities. Ability to adapt to changing project requirements and market conditions. Excellent command of English. Driving licence is not mandatory. Willingness to travel as required. Flexibility to work according to project and business requirements.

<strong>About The Role<br><br></strong>Our client is seeking a highly experienced Software Solution Architect - AI &amp; Startup Technology to play a key technical role within the their Group Startup Program, an initiative focused on identifying, evaluating, investing in, and enabling high-potential technology startups.<br><br>This is not a traditional Solution Architect or presales position. The role sits at the intersection of software architecture, artificial intelligence, startup technology evaluation, software productization, technical due diligence, and strategic technology integration.<br><br>The Solution Architect will work closely with startup founders, CEOs, CTOs, engineering teams, Group leadership, and ecosystem partners to understand and evaluate the technologies being developed by startups participating in the program.<br><br>The successful candidate will assess the technical strength, maturity, scalability, productization potential, and future possibilities of startup technologies and determine where our client's technology and capabilities can create additional value.<br><br>Following the qualification and onboarding of selected startups, the Solution Architect will help define and architect the integration of relevant technologies from our client into their products and platforms. Where startups lack mature technical leadership, the Solution Architect may also provide architectural guidance and strategic technical direction.<br><br>The position requires someone who can move comfortably between deep technical discussions with engineers and strategic conversations with founders and executives.<br><br><strong>Requirements<br><br></strong><strong>KEY RESPONSIBILITIES<br><br></strong><strong>Startup Technology Evaluation &amp; Technical Due Diligence<br><br></strong><ul><li>Conduct in-depth technical assessments of startups being considered by our client's Startup Program</li><li>Understand each startup's product, underlying technology, architecture, engineering approach, AI capabilities, and technical roadmap</li><li>Evaluate whether the technology has been sufficiently validated and distinguish between concepts, prototypes, MVPs, and production-ready products</li><li>Assess the maturity, scalability, maintainability, extensibility, reliability, and enterprise readiness of startup technology</li><li>Evaluate software architecture, infrastructure, APIs, integrations, data architecture, AI/ML components, security considerations, and deployment models</li><li>Identify architectural limitations, technical debt, scalability challenges, dependencies, and other material technology risks</li><li>Assess the technical feasibility of the startup's product roadmap and future technology ambitions</li><li>Translate technical findings into clear recommendations and insights for our client's leadership and other stakeholders involved in startup qualification<br><br></li></ul><strong>AI, NLP &amp; Intelligent Systems<br><br></strong><ul><li>Assess AI-driven products and platforms with strong technical depth across Artificial Intelligence, Machine Learning, NLP, Generative AI, and modern AI architectures</li><li>Evaluate how AI is currently implemented within startup products and determine the maturity and scalability of those capabilities</li><li>Review architectures involving LLMs, RAG, AI agents, model integrations, embeddings, vector search, knowledge systems, APIs, data pipelines, and related AI technologies where applicable</li><li>Evaluate the appropriateness of AI models, frameworks, platforms, and integration approaches for specific product requirements</li><li>Identify opportunities where AI can meaningfully enhance a startup's existing product rather than being introduced without clear product or business value</li><li>Provide architectural guidance for integrating AI capabilities into scalable software products<br><br></li></ul><strong>Software Productization<br><br></strong><ul><li>Evaluate the startup's ability to evolve technology from a prototype or MVP into a scalable commercial software product</li><li>Assess product architecture against requirements for enterprise deployment, multi-tenancy, scalability, security, observability, maintainability, availability, and integration</li><li>Identify technical and architectural gaps preventing a startup from achieving production or enterprise readiness</li><li>Guide startups on architectural improvements required to support growth and commercialization</li><li>Help startups establish appropriate technical foundations for scaling their products, teams, and customer deployments</li><li>Balance engineering quality, scalability, speed of execution, and commercial requirements when recommending architectural decisions<br><br></li></ul><strong>Our Client's Technology Integration<br><br></strong><ul><li>Develop a strong understanding of our client's technology portfolio, platforms, APIs, products, and technical capabilities</li><li>Determine where our client's technologies can create measurable technical or product value for participating startups</li><li>Identify appropriate integration opportunities based on the startup's architecture, product strategy, and technology roadmap</li><li>Design high-level and detailed solution architectures for integrations between our client's technologies and startup platforms</li><li>Work with our client's engineering teams and startup technical teams to define integration requirements, architecture, interfaces, dependencies, and implementation approaches</li><li>Support the technical journey from initial integration concept through implementation and production deployment</li><li>Evaluate how startups could evolve their products and capabilities through the adoption of our client's technologies<br><br></li></ul><strong>Technical Leadership &amp; Startup Advisory<br><br></strong><ul><li>Act as a trusted technical advisor to selected startups participating in the program</li><li>Provide architectural and technical leadership where startups have capable engineering teams but lack senior architecture or technology leadership</li><li>Work directly with startup CTOs, technical founders, architects, and engineering teams to address complex technology decisions</li><li>Challenge architectural assumptions constructively and help teams evaluate alternative technical approaches</li><li>Support startups in developing scalable technical strategies and architecture roadmaps</li><li>Provide guidance without unnecessarily replacing or disrupting existing startup technical leadership<br><br></li></ul><strong>Required Experience<br><br></strong><ul><li>Significant professional experience in Software Engineering, Solution Architecture, Software Architecture, Product Architecture, or Enterprise Solution Architecture</li><li>Strong hands-on technical foundation with the ability to understand complex software systems beyond high-level architecture diagrams</li><li>Proven experience designing and architecting enterprise-grade software products and platforms</li><li>Strong expertise in Artificial Intelligence, Machine Learning, NLP, and modern AI architectures</li><li>Practical experience integrating AI capabilities into production software products</li><li>Strong understanding of APIs, microservices, distributed systems, cloud architecture, data platforms, integration patterns, and modern software engineering practices</li><li>Demonstrated experience taking software products or platforms from concept/MVP through productization and production deployment</li><li>Experience assessing scalability, availability, security, performance, maintainability, and technical debt within software platforms</li><li>Ability to evaluate unfamiliar technology stacks and rapidly understand how complex products have been architected</li><li>Experience working directly with customers, founders, executives, product leaders, or other senior stakeholders</li><li>Strong ability to translate business and product requirements into scalable technical architectures<br><br></li></ul><strong>Benefits<br><br></strong><ul><li>Credits and Cash Investment</li><li>Medical Insurance</li><li>Annual Flight Home</li><li>Hybrid Working</li><li>Unlimited Leave</li><li>Team Stock Option Pool.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The SANAD lab at NYUAD is hiring a Junior Research Scientist to work with Dr. Sarah Nadi in the Division of Science (Computer Science Program) at New York University Abu Dhabi. The candidate will conduct research on programming languages and software engineering, develop open-source tools and resources, and work on publications related to their research.</p><br><br> <p>The name SANAD (سند), meaning "support" in Arabic, is short for Software Analysis and Developer Support, reflecting the lab’s mission to assist developers as software systems become increasingly intricate. Specializing in program analysis and software analytics, the lab works on enhancing the precision and scalability of static analyses and mining insights from software repositories. Ongoing research projects include detecting API misuse, analyzing program performance, measuring energy consumption, detecting security vulnerabilities, supporting library migrations, and leveraging large language models (LLMs) for software engineering and static analysis tasks. More information can be found on https://sanadlab.org.</p><br><br> <p><strong>Key Responsibilities:</strong></p><br><br> <p>As a Junior Research Scientist, you will be involved in all aspects of our research, including conducting literature reviews, collecting and analyzing data, implementing tools, running experiments, and writing papers. This is an excellent opportunity to develop your research skills and your publication record, especially if you are considering pursuing a Master’s or PhD degree.</p><br><br> <p><strong>Position Details:</strong></p><br><br> <p>The candidate is expected to begin asap (e.g. October 2026) and the contract will be for 9-10 months.</p><br><br>Qualifications<p><strong>Minimum Qualifications:</strong></p><br><br> <ul> <li>Master’s degree with less than 5 years of research experience</li> <li>Bachelor’s degree in Computer Science (coursework/projects must include software engineering related topics)</li> <li>Excellent programming skills </li> <li>Strong software engineering skills including use of version control systems, continuous integration, testing</li> <li>Excellent communication skills (both written and verbal)</li> <li>Demonstrated ability to work as part of a team</li> </ul> <p><strong>Preferred Qualifications:</strong></p><br><br> <ul> <li>Previous software engineering research experience</li> <li>Knowledge of use and/or development of generative AI, e.g., use of Large Language Models for certain (software engineering) tasks</li> <li>Previous software engineering paper submission or publication is a plus</li> </ul>Application Instructions<p>To be considered, all applicants must submit</p><br><br> <ul> <li>Cover letter</li> <li>Statement of interest in the position (1 page summarizing research accomplishments and research interests)</li> <li>Curriculum vitae (CV)</li> <li>Transcripts of all degrees</li> <li>Two letters of recommendation. For applicants with previous research experience, one of the reference letters must be from their previous research project/position supervisor.</li> </ul> <p>If you have any questions, please email sarah.nadi@nyu.edu</p><br><br> <p><span><strong><span>About NYU Abu Dhabi</span></strong><span>https://nyuad.nyu.edu/en/ </span><span>NYU Abu Dhabi is the first comprehensive liberal arts and research campus in the Middle East to be operated abroad by a major American research university. Times Higher Education ranks NYU among the top 30 universities in the world, making NYU Abu Dhabi the highest-ranked university in the UAE and MENA region. NYU Abu Dhabi has integrated a highly selective undergraduate curriculum across the disciplines with a world center for advanced research and scholarship. The university enables its students in the sciences, engineering, social sciences, humanities, and arts to succeed in an increasingly interdependent world and advance cooperation and progress on humanity’s shared challenges. NYU Abu Dhabi’s high-achieving students have come from over 120 countries and speak over 100 languages. Together, NYU's campuses in New York, Abu Dhabi, and Shanghai form the backbone of a unique global university, giving faculty and students opportunities to experience varied learning environments and immersion in other cultures at one or more of the numerous study-abroad sites NYU maintains on six continents. <br></span></span></p><br><br> <p><span>NYUAD is committed to upholding a culture of non-discrimination, anti-harassment, dignity, and mutual respect; providing equal access and opportunity; and fostering academic excellence in learning, research, and teaching.<br></span></p><br><br> <p><span>Students are drawn from among the world’s best. They are bright, intellectually passionate, and committed to building a campus environment anchored in mutual respect, understanding, and care. The NYUAD undergraduate student body has garnered an impressive record of scholarships, graduate-school admissions, and other global honors. Graduate education is an area of growth for the University; the current graduate student population of over 100 students is expected to expand in the next decade as doctoral programs are developed.</span></p><br><br> <p><span><strong>Working for NYUAD<br></strong></span><span>At NYUAD, we recognize that Abu Dhabi is more than where you work; it’s your home. In order for research staff to thrive, we offer a comprehensive benefits package. This starts with a generous relocation allowance; educational assistance for your dependents; access to health and wellness services; and more. NYUAD is committed to research staff success throughout the academic trajectory, providing support for ambitious and world-class research projects and innovative, interactive teaching approaches. Support for dual-career families is a priority. </span><span>Visit our website for more information on benefits for you and your dependents.</span></p><br><br> <p><span>NYUAD is an equal-opportunity employer. We welcome applications from all qualified candidates and seek individuals who will contribute to the excellence and vibrancy of our academic community.</span></p><br><br> <p><span>Applications are welcome from all qualified candidates. In line with UAE regulations, Emirati candidates are encouraged to apply.</span></p><br><br> <p><span><strong>Join NYU Abu Dhabi, an exceptional place for exceptional people.</strong></span></p><br><br> <p><span>NYUAD values belonging and respect; such principles are fundamental to the university’s commitment to excellence. NYUAD is an equal-opportunity employer. We welcome applications from all qualified candidates and seek individuals who will contribute to our vibrant, multidisciplinary research and teaching community. Multidisciplinary research and exceptional teaching in a global campus community are hallmarks of the University’s mission.</span></p><br><br> <p><span>@WorkAtNYUAD</span></p><br><br><br> </div>

Madison Pearl is partnering with a Singaporean family office for an opportunity of Contracts and Commercial Manager within their real estate development team in Abu Dhabi and Dubai. <br>Key Responsibilities:<br>Lead the procurement, contracts, and commercial management function across a portfolio of real estate development projects, ensuring value for money and protection of the company's commercial interests. Develop and execute procurement strategies, manage tendering processes, evaluate suppliers, and negotiate contracts with consultants and contractors. Oversee contract administration, including claims, variations, Extension of Time (EOT) assessments, payment certifications, and commercial risk management. Monitor project costs, budgets, cash flow, and commercial performance, delivering accurate forecasting, cost control, and value engineering recommendations. Collaborate with internal stakeholders, consultants, contractors, and finance teams to ensure timely project delivery, contract compliance, and effective commercial decision-making. Prepare executive-level commercial reports and dashboards, providing management with insights on contract performance, risks, claims, budgets, and key strategic decisions.<br>Qualifications & Skills:<br>Bachelor’s degree in quantity surveying, engineering or other relevant field. Minimum 10 years of experience in construction or real estate developer. Strong expertise in FIDIC and UAE-standard contract forms. Hands on Experience with payment certification and cash flow management. Exceptional communication skills and ability to manage C level executives.<br>Interested candidates please apply to this advertisement directly or send your CV to natasha.lilani@madisonpearl.com <br><br> *Only shortlisted candidates will be contacted*