Car painter Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to independently or under the supervision of senior Sonographer or Radiologist perform all Sonography imagery procedures,&nbsp;analyse output for diagnostic evaluation purpose, and report to supervisor as needed. The Sonographer’s functions are performed consistent with their education and training, and in accordance with facility, protocols, policies, and procedures, and applicable professional standards.</p><p><strong>Responsibilities</strong></p><p><strong>Key Responsibilities</strong></p><p><strong>Corresponding Key Activities performed by the role</strong></p><p><strong>Managerial</strong></p><ul><li><p>Maintaining sufficient inventory of material supplies and equipment for performance of duties</p><ul><li><p>Reporting shortage of materials to supervisor at earliest convenience, maintaining records for ordering and replenishments</p></li></ul></li></ul><p><strong>Technical</strong></p><ul><li><p>Performing all Sonography imagery procedures in accordance with departmental policies, procedures and protocols. Applying detailed knowledge of anatomy and physiology to produce images of high diagnostic quality</p><ul><li><p>As necessary, acquire additional images to facilitate optimum diagnostic results for the interpreting physician&nbsp;</p></li><li><p>Evaluating and assessing Sonography images produced for acceptable quality, appropriateness and completeness, and advising other staff when required. Forwards images for Radiologist for review and reporting&nbsp;</p></li><li><p>Apply independent, professional, and ethical judgment in the sonography examination to ensure that appropriate anatomical, pathological, and clinical conditions are accurately captured in the examination images.</p></li><li><p>Perform advanced sonography&nbsp; services or other tasks&nbsp; delegated by the supervising physician, consistent with education, training, and facility protocols, policies, and procedures.</p></li><li><p>Provide preliminary report of sonography examination for use by the interpreting physician.</p></li><li><p>Recognizing anatomy and pathology in cross sectional imaging to optimize scan protocols, and liaise with radiologist to arrange further imaging or tests.</p></li><li><p>Responsible for the safe and competent use of all Ultrasound equipment, patient appliances and aids used in the department. Reporting any incidents and equipment faults to senior staff in a timely manner.&nbsp;</p></li><li><p>Operating advanced software on specialist Ultrasound equipment e.g. doppler scan</p></li><li><p>Maintaining a clean and tidy working environment. Including restocking of supplies for subsequent use and equipment cleaning.&nbsp;</p></li><li><p>Providing advice to medical/ technical staff on appropriate techniques and imagery interventions.&nbsp;</p></li><li><p>Dealing with patients and clinical staff initial enquiries and to relay to clinical staff where necessary</p></li><li><p>Practices proper entries and records into Hospital Information System. Input of the radiological images onto the Hospital PACS system.</p></li></ul></li></ul><p><strong>Quality and Safety</strong></p><ul><li><p>Promoting and maintaining quality in all services and ensure continuous quality improvement measures are in place. Conduct method evaluation/ development as per standard policies and procedures</p><ul><li><p>Complying with all safety and quality control programs and procedures as applicable</p></li><li><p>Complying with applicable precautions for environmental safety, infection control, using a series of interventions that minimize or prevent cross infections</p></li><li><p>Ensuring that safety procedures and quality assurance tests are maintained within all sections</p></li><li><p>Comply and support clinical audit processes within the service and report on these as agreed&nbsp;</p></li><li><p>Communicating in a professional and courteous manner with patients, family and other medical personnel as necessary to obtain information for laboratory records, explain procedures, clarify orders and communicate status.&nbsp; &nbsp;</p></li></ul></li></ul><p><strong>Continuous Education</strong></p><ul><li><p>Participating in education sessions for department staff, doctors and nurses on the safe and secure handling of equipment, i.e teaching, induction, peer review, case studies, and clinical presentations</p><ul><li><p>Participating in department programs/ committees, various hospital committees, and staff meeting (when requested)&nbsp;</p></li><li><p>Participating in the orientation and training of new employees</p></li><li><p>Maintaining professional knowledge by attending lectures, seminars or on-line education sessions</p></li><li><p>Completing and maintaining all regulatory requirements including licensure and certification and other mandatory training within established time frames.</p></li><li><p>The ability to apply technical skills, together with a demonstrable knowledge of and interest in sciences, such as anatomy, physiology and physics;</p></li></ul></li></ul><p><strong>Occupational Safety and Health Management Systems&nbsp;</strong></p><br><ul><li><p>Comply with all OSH and infection control policies, standards and procedures and cooperate with hospital management to comply those requirements</p><ul><li><p>Notifying OSH Hazards, incidents, Near misses and issues and assistance with the preparation of risk assessments, incident reports</p></li><li><p>Attend applicable OSH/Infection control training programs, mock drills and awareness programs</p></li><li><p>Comply with reasonable OSH instructions, policies and safe working procedures&nbsp;</p></li><li><p>Use of appropriate personal protective equipment and safety systems.&nbsp;</p></li><li><p>&nbsp;Be familiar with emergency and evacuation procedures&nbsp;</p></li><li><p>&nbsp;Not wilfully or recklessly endanger anyone’s health and safety&nbsp;</p></li><li><p>Comply with Waste management procedures and policies. Reduce, Reuse, Recycling of waste as much as possible&nbsp;</p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills.&nbsp;</p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul></li></ul><p><strong>Prevention and Control of Infection (PCI):&nbsp;</strong></p><p><strong><u>&nbsp;</u></strong></p><ul><li><p>PCI is everyone’s responsibility. All staff are required to read and implement the NMC PCI Policy and Strategy in an effort to maintain the highest possible standards of cleanliness at all times, thus reducing the risk of infection in patients, staff and visitors.&nbsp;</p><ul><li><p>The strictest hand hygiene, 5 moments of hand hygiene, bare below the elbows and environmental care, will be expected of all staff, including the post holder, at all times</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications &amp; licensure</strong></p><p><strong>Required:</strong></p><ol><li><p>BSc in Radiography OR graduate from an accredited Diploma Program (NLT 3 year Syllabus)</p></li><li><p>Graduate from an accredited Radiography program (NLT 2 years Syllabus), i.e The American Registry for Diagnostic Medical Sonography (ARDMS)&nbsp;</p></li><li><p><strong>AND</strong> current National License&nbsp;</p></li></ol><p><strong>Desired: &nbsp;</strong></p><ul><li><p>Dedicated courses in specialised Sonography Imaging is preferred&nbsp;</p></li></ul><p><strong>Experience required in addition to the Qualifications mentioned above</strong></p><p><strong>Required:</strong></p><ul><li><p>NLT 2 years post graduate experience in ultrasound in an acute care hospital. Including Doppler, obstetric/ gynecology and abdominal sonography.&nbsp;</p></li></ul><p><strong>Specialist Certification</strong></p><p><strong>Required: &nbsp;</strong>NA</p><p><strong>Desired: &nbsp;</strong>NA</p><p><strong>Additional requirements</strong></p><br><ul><li><p>Self-motivation and the ability to work under pressure;</p><ul><li><p>Fluent spoken and written English. Spoken Arabic is advantageous but not essential.</p></li><li><p>A supportive and caring disposition;</p></li><li><p>Adaptability and good time management skills;</p></li><li><p>Confidence in dealing with stressful situations;</p></li><li><p>IT competencies.</p></li></ul></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>AECOM is seeking a highly skilled and experienced&nbsp;<strong>Senior Mechanical Engineer</strong>&nbsp;to join our&nbsp;<strong>Buildings &amp; Places (B&amp;P) Construction Supervision</strong>&nbsp;team. This role involves overseeing mechanical engineering aspects of construction projects, ensuring compliance with design specifications, quality standards, and project timelines. The ideal candidate will bring technical expertise, leadership capabilities, and a commitment to delivering excellence in the built environment.</p><br><ol><li><p><strong>Construction Supervision &amp; Quality Assurance</strong></p><br><ul><li>Oversee the installation, testing, and commissioning of mechanical systems, including HVAC, plumbing, fire protection, and other building services.</li><li>Independently perform walk-downs and inspections of installed commodities to ensure conformance with specifications and design.</li><li>Ensure all mechanical works comply with project specifications, codes, standards, and safety regulations.</li><li>Conduct regular site inspections to monitor progress and address technical issues.</li></ul></li><li><p><strong>Technical Leadership</strong></p><br><ul><li>Provide technical guidance to project teams, contractors, and stakeholders.</li><li>Review and approve mechanical design drawings, shop drawings, and material submittals.</li><li>Display knowledge and abilities to evaluate, select, and apply standard engineering techniques, procedures, and criteria to meet basic engineering and construction specifications.</li><li>May provide technical direction to drafters, technicians, and surveyors.</li></ul></li><li><p><strong>Project Coordination</strong></p><br><ul><li>Collaborate with multidisciplinary teams, including architects, civil engineers, and electrical engineers, to ensure seamless integration of mechanical systems.</li><li>Coordinate with contractors and subcontractors to ensure timely execution of mechanical works.</li></ul></li><li><p><strong>Documentation &amp; Reporting</strong></p><br><ul><li>Prepare and maintain detailed site reports, inspection records, and progress updates.</li><li>Perform quantity surveys for tracking and reporting.</li><li>Ensure accurate documentation of as-built drawings and project handover deliverables.</li></ul></li><li><p><strong>Compliance &amp; Risk Management</strong></p><br><ul><li>Ensure compliance with local building codes, environmental regulations, and health and safety standards.</li><li>Identify potential risks and implement mitigation strategies to minimize project delays or cost overruns.</li></ul></li><li><p><strong>Professional Judgment</strong></p><br><ul><li>Display sound professional judgment on details of work, ensuring engineering solutions align with project goals and standards.</li></ul></li></ol><br>Qualifications<br><ul><li>Bachelor’s degree in Mechanical Engineering or a related field (Master’s degree preferred).</li><li>Minimum of 10 years of experience in mechanical engineering, with at least 5 years in construction supervision for B&amp;P projects.</li><li>Proficiency in mechanical design software (e.g., AutoCAD, Revit MEP, BIM tools).</li><li>Strong understanding of mechanical systems, building codes, and construction methodologies.</li><li>Knowledge of international standards such as ASHRAE, NFPA, and LEED is a plus.</li><li>Excellent leadership and team management abilities.</li><li>Strong problem-solving and decision-making skills.</li><li>Effective communication and interpersonal skills to liaise with clients, contractors, and team members.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

Location: Abu Dhabi Duration: Yearly renewable contract Role: Senior individual-contributor role leading technical direction and architecture for production AI systems and backend platforms within an AI Factory.<br>Key Responsibilities:Lead AI architecture, system design, and technical strategy across teams. Design production AI systems including RAG, agents, model evaluation, inference and serving. Build/scaling backend platforms, APIs, event-driven systems, Postgre SQL, Kubernetes and Azure infrastructure. Provide hands-on technical leadership and review/write critical code. Mentor senior/staff engineers and raise engineering standards. <br>Must-Have Skills:12+ years software engineering experience at Staff/Principal level. Expert Python; working knowledge of Go/Rust/Java/Kotlin. Strong production AI/LLM, RAG, agents, evaluation and inference experience. Distributed systems and event-driven architecture (Kafka/Azure Service Bus/Event Hubs). Postgre SQL at scale, Docker & Kubernetes. Strong Azure cloud experience: AWS/GCP is a plus. Experience with AI coding agents such as Codex/Claude Code/Open Code. Strong architecture, communication, and technical leadership skills. <br>Preferred:Lang Graph/Lang Chain, v LLM/TGI/Tensor RT-LLM, vector DBs (pgvector/Qdrant/Pinecone), Redis, Elasticsearch/Open Search, AI platform engineering, security/compliance, Arabic/voice AI, and government/regulated-sector experience

Job Summary<br><br>The Desktop Support Engineer will provide day to day technical support for end users across Windows 10 Windows 11 laptop desktop Mac OS and mobile devices. The role includes support for Microsoft 365 Active Directory printers MFD devices collaboration rooms and basic network related issues. The engineer will ensure timely resolution of incidents maintain user satisfaction and support IT operations in a professional manner.<br><br>Responsibilities<br><br>Provide technical support for Windows 10 Windows 11 laptop desktop Mac OS and mobile devices.<br><br>Troubleshoot Microsoft 365 applications user access issues email issues and basic configuration problems.<br><br>Manage user accounts groups password resets and access requests in Active Directory.<br><br>Support printer and MFD related incidents including connectivity driver issues and basic device troubleshooting.<br><br>Assist with device management and software deployment using JAMF SCCM and MECM.<br><br>Support Zoom and Webex Rooms for meeting room setup basic troubleshooting and user assistance.<br><br>Troubleshoot basic network issues including connectivity WiFi LAN and VPN related problems.<br><br>Log track and resolve incidents and service requests within agreed timelines.<br><br>Coordinate with internal IT teams and vendors for issue resolution when required.<br><br>Maintain accurate documentation for tickets assets and troubleshooting steps.<br><br>Required Skills<br><br>Windows 10 Windows 11 laptop support desktop support Mac OS support mobile device support Microsoft 365 Active Directory printer support MFD support.<br><br>Good To Have Skills<br><br>JAMF SCCM MECM Zoom Rooms Webex Rooms basic networking.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property &amp; buildings, and transportation sectors.</p><br><p><strong>About the Role</strong></p><br><p>We are seeking a highly skilled&nbsp;<strong>Senior Structural Engineer</strong>&nbsp;to join our team at GHD. As a key member of our engineering team, you will be responsible for designing and developing structural systems for various building and infrastructure projects.</p><br><p><strong>Key Responsibilities</strong></p><br><ul><li>Design and develop structural systems for buildings projects, ensuring compliance with local authority design requirements and industry standards.</li><li>Collaborate with project managers and other team members to deliver innovative and cost-effective solutions that meet client requirements.</li><li>Review and provide input on engineering designs, ensuring they meet quality and safety standards.</li><li>Manage and mentor junior engineers and BIM technicians to ensure successful project execution.</li><li>Ensure quality assurance and quality control procedures are followed throughout project execution.</li><li>The successful candidate will be a Senior Structural Engineer with a proven track record in the design of buildings and civil engineering or infrastructure-related structures, in reinforced concrete, and structural steelwork.</li></ul><p><strong>Experience &amp; Qualifications</strong></p><br><ul><li>Bachelor’s degree in civil engineering or Structural Engineering. Master's degree preferred.</li><li>Minimum of 8 years of experience in structural engineering, with a focus on design of building structures.</li><li>Professional engineering license or equivalent certification preferred.</li><li>Experience undertaking the design of water-retaining structures, building structures, steelwork or related infrastructure</li><li>Has worked within multi-disciplinary teams, and has been responsible for co-ordination with MEP, Architecture, Utilities.</li><li>Proficiency in structural analysis software (e.g., SAP2000, ETABS, STAAD.Pro) and computer-aided design (CAD) tools.</li><li>Strong project management skills, with the ability to lead and motivate multidisciplinary teams, manage project budgets and schedules, and deliver successful outcomes.</li><li>Excellent communication and interpersonal skills, with the ability to build positive relationships with clients, stakeholders, and team members.</li><li>Proven track record of successfully delivering structural engineering projects, with a focus on safety, quality, and innovation.</li><li>Fluency in English; Arabic language skills would be advantageous.</li><li>Experience of working within a 3D design environment is needed and an ability to work to BIM protocols would be desirable</li><li>A knowledge of practices and procedures used within the retail, commercial and/or industrial sectors would be an advantage.</li></ul><p><strong>Why Join Us?</strong></p><br><ul><li>Be part of a globally recognised, fast-growing mission critical team delivering projects that blend technical excellence, sustainability, and commercial success.</li><li>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions.</li><li>Join a team that values knowledge-sharing, mentorship, and professional excellence.</li><li><strong>Be part of a workplace that combines collaboration, flexibility, and connection. Join us in the office three days per week to contribute, connect and excel in our vibrant environment.</strong></li></ul><br> </div>

<ul><li><p>Greet patients, direct them to appropriate departments and provide routine information about the hospital when necessary.</p></li><li><p>Handle telephone inquiries from patients and provide information to the respective doctor/nurse for the call backs.</p></li><li><p>Appointment management including no-shows, rescheduling of patients and confirmations.</p></li><li><p>Register new patients and ensure the records of current patients are up to date.</p></li><li><p>Provide information about medical insurance coverage to patients and collect the payment/ co-payment&nbsp; based on the insurance eligibility.</p></li><li><p>Provide claim forms in case the patient wants to claim reimbursement.</p></li><li><p>Facilitate daily cash collection, credit card slips, and cheques deposits at the designated location within the hospital premises, ensuring timely and accurate processing at the end of each shift, adhering to the standards of finance protocols.</p></li><li><p>Maintain working knowledge of the Hospital Information System, times of all clinics, duration of appointments, doctor’s duty roster, and procedures for booking appointments.</p></li><li><p>Perform duties of handling patients, telephone calls, cash, and back-office work as specified in the duty roster.</p></li><li><p>Check emails daily, ensuring you respond to queries in a timely manner.</p></li><li><p>Ensure operations are carried out uniformly according to the hospital policies and procedures.</p></li><li><p>Contributes to team effort by accomplishing related results as needed and maintains safe and clean reception area by complying with procedures, rules, and regulations.</p></li><li><p>Participate in the Hospital training programs.</p></li><li><p>Ensure complaints are handled in a structured, timely and professional manner which is fair, courteous and respectful of privacy, to identify problems and to continuously improve the department's services.</p></li><li><p>Follows the duty schedule as assigned by the team leader/supervisor which includes different shift timings as per the need of the department</p></li><li><p>Strictly adheres to NMC’s regulations and policies especially those related to infection control,&nbsp;patient safety & JCI.</p></li><li><p>Supports Continuous Quality Improvement and participates and contributes to all the quality assurance activities of the service.</p></li><li><p>Exercises effective interpersonal skills in dealings with department staff, colleagues and management.</p></li><li><p>Maintains patient & staff confidentiality.</p></li><li><p>Maintain high standards of data accuracy while ensuring compliance with privacy regulations.</p></li><li><p>Generate and process patient invoices for services rendered, including consultations, treatments, and diagnostic tests.</p></li><li><p>Ensure that all charges are accurately recorded in the patient’s account, reflecting the correct services, dates, and codes.</p></li><li><p>Issue bills and invoices to patients for any outstanding balances, including co-pays, deductibles, or non-covered services.</p></li><li><p>Provide patients with detailed statements and assistance in understanding their charges and payment options.</p></li><li><p>Prepare and process patient invoices for services, ensuring accurate charges.</p></li><li><p>Collect co-pays, deductibles, and outstanding balances at the time of service.</p></li><li><p>Ensure billing practices comply with legal and insurance requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>College Diploma</p></li><li><p>Any discipline or related fields.</p></li></ul>

<p>A reputable company is hiring a Site Engineer to oversee daily site activities, coordinate with workers and contractors, monitor work progress, and ensure projects are completed according to approved drawings, specifications, quality standards, and safety requirements.</p> <p>Responsibilities:</p> <p>Supervise and coordinate daily construction/site activities.<br /> Monitor work progress and ensure activities follow project schedules.<br /> Review drawings, plans, specifications, and work requirements.<br /> Coordinate with contractors, subcontractors, technicians, and site workers.<br /> Inspect completed and ongoing work to ensure quality standards are maintained.<br /> Identify site issues and coordinate appropriate solutions.<br /> Monitor the use of materials, tools, and equipment.<br /> Prepare daily progress reports and maintain site documentation.<br /> Ensure proper implementation of health and safety procedures.<br /> Coordinate inspections and support project handover activities.<br /> Report delays, technical issues, and site requirements to management.<br /> Perform other site-related duties as assigned.</p> <p>Requirements:</p> <p>Bachelor&#8217;s degree or diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or a related field.<br /> Previous site or construction experience is preferred.<br /> Good understanding of engineering drawings and site procedures.<br /> Strong communication and coordination skills.<br /> Good problem-solving and organizational abilities.<br /> Basic computer skills and knowledge of MS Office.<br /> Ability to work under pressure and meet project deadlines.<br /> Ability to work effectively with different teams on site.<br /> Freshers with relevant engineering qualifications may be considered.</p> <p>Interested candidates are encouraged to send their updated CV hrmira.mehra@gmail.com</p>

<p>Provide specialist rheumatology consultations in an outpatient clinic setting. Diagnose and manage inflammatory arthritis, connective tissue disease, osteoporosis, chronic pain conditions, and autoimmune disorders. Prescribe, monitor, and optimise treatment plans, including DMARDs and biologic therapies where clinically appropriate. Perform joint assessments and outpatient procedures such as joint injections where applicable. Order and interpret laboratory tests, imaging, and relevant investigations. Develop long-term follow-up plans for chronic rheumatology patients. Collaborate with Orthopaedics, Physiotherapy, Internal Medicine, Family Medicine, and other specialties. Educate patients on diagnosis, treatment options, medication use, lifestyle management, and long-term disease control. Maintain accurate medical records in line with clinical governance and regulatory standards. Participate in clinical audit, CME, service development, and quality improvement initiatives. </p><p><strong>Desired Candidate Profile</strong></p><p>Specialist Rheumatologist with UAE professional registration or eligibility. DHA, DOH/HAAD, or MOH specialist licence preferred. Completion of recognised specialist qualification approved by UAE regulatory authorities. Minimum 5 years’ post-specialist experience preferred. Strong outpatient rheumatology experience. Confident managing chronic inflammatory, autoimmune, and musculoskeletal conditions. Experience prescribing and monitoring DMARDs and biologic therapies. Excellent patient communication and follow-up management skills. Fluent English language skills. Arabic language skills are advantageous but not mandatory.</p>

<p>As a VIP Homecare Nurse, you will provide high-quality one-to-one nursing care within private residences and luxury environments. You will play a key role in supporting continuity of care, managing ongoing health needs, coordinating with healthcare professionals, and accompanying patients during international travel. Key Responsibilities Deliver personalised one-to-one nursing care to VIP patients Administer medications and monitor vital signs Maintain accurate clinical records and documentation Coordinate care with physicians and allied healthcare professionals Support chronic disease management and ongoing healthcare needs Accompany patients to medical appointments and international travel destinations Build trusted relationships with patients and families Maintain the highest levels of professionalism, discretion, and confidentiality Work within a culturally sensitive and service-focused environment</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Please only apply if you meet ALL of the following requirements:</strong> Fluent Arabic and English language skills (mandatory) Currently residing in Europe, the United Kingdom, North America, South Africa, Australia, or New Zealand Qualified as a Registered Nurse in Europe, the United Kingdom, North America, South Africa, Australia, or New Zealand Minimum 5 years of post-registration nursing experience Able to travel extensively throughout Europe and North America as part of the role Available for international travel at short notice, including extended overseas assignments Applications that do not meet these requirements will not be considered.</p>

<ul><li><p>Follow the SOP, Quality and HSE Guidelines of designated Machinery to achieve optimum result, Product safety and safe usage of machinery and personnel safety. Follow the cleaning and caring of the machinery designated to the Operator and report any breakdown and loss of productivity to Maintenance Technicians and Production Supervisor in appropriate Breakdown reports. Do not allow unauthorized usage of designated machinery to avoid damage to machine, product safety and personnel safety. Achieve production plan within the specified time with a commitment to quality instruction in the production process. Comply with all the instructions to the inner workings of the production department during client productivity. Commitment to public safety instructions on production lines and facilities. Follow up the implementation of all production work on the production line in accordance with the production plan contained. Follow the rules of quality and food safety; the public followed the instructions and quality control (QC in the production process). Receive raw materials from the warehouse/ Process steps and follow signals and instructions, follow up the development of these materials and arrange them properly and as directed by the production Supervisor/ Process flow.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>A minimum of 1 years of progressive experience in a manufacturing or industrial setting, with a focus on machine operation and maintenance.</p></li><li><p>Proven experience with PLC programming and troubleshooting, along with proficiency in diagnostic software.</p></li><li><p>Certification in relevant areas such as industrial maintenance, electrical safety, or specific machinery operation.</p></li></ul>

About the Company<br><br>We are a leading engineering consultancy firm dedicated to providing innovative solutions in the field of mechanical engineering, particularly in irrigation and water infrastructure. Our mission is to enhance sustainable practices while delivering high-quality services to our clients. We foster a collaborative culture that values diversity, creativity, and professional growth.<br><br>About the Role<br><br>The role requires a highly skilled mechanical engineer with extensive experience in design, consultancy, and site supervision, particularly in irrigation and water infrastructure projects. The successful candidate will be responsible for overseeing the design and implementation of various water systems, ensuring compliance with industry standards and client specifications.<br><br>Responsibilities<br><br>Minimum 5 years of relevant professional experience in mechanical engineering, with a strong combination of design, engineering consultancy, and site supervision experience in irrigation, water infrastructure, and pumping systems. Proven experience in the design and supervision of irrigation systems, including drip, sprinkler, and bubbler systems. Experience conducting hydraulic calculations, pressure testing, hydraulic troubleshooting, and pump performance assessments. Strong experience in the design and supervision of water pipelines, connection chambers, pumping stations, irrigation networks, and non-disruptive road crossings. Experience preparing and reviewing engineering calculations, hydraulic designs, technical drawings, specifications, procurement documents, installation packages, technical reports, and detailed analyses. Ability to independently define engineering problems, establish the scope of work, develop schedules, plan activities, provide technical direction, and monitor project progress. Experience reviewing and approving technical submittals, material proposals, shop drawings, method statements, and contractor submissions. Proven ability to coordinate design requirements with site execution, identify design discrepancies, and provide practical engineering solutions during construction. Experience in site supervision, including monitoring contractor activities, inspecting installations, ensuring compliance with approved drawings and specifications, and witnessing testing and commissioning activities. Knowledge of water quality, irrigation efficiency, water management, and sustainable irrigation solutions, with the ability to recommend appropriate systems, materials, and products. Experience preparing irrigation logs, water consumption reports, pump performance reports, inspection reports, and progress reports. Ability to conduct technical audits and ensure compliance with project specifications, authority requirements, quality standards, and approved designs. Experience supervising junior engineers, technicians, and site personnel, including providing technical guidance and performance feedback. Strong knowledge of Dubai infrastructure networks and applicable Dubai Municipality requirements. Dubai Municipality-approved Mechanical Engineer is required. Excellent verbal and written communication skills with strong coordination abilities across clients, consultants, contractors, and project teams. Proficiency in Auto CAD, Microsoft Excel, Microsoft Word, and other relevant engineering/design software.<br><br>Qualifications<br><br>Education details: Dubai Municipality-approved Mechanical Engineer is required.<br><br>Required Skills<br><br>Strong verbal and written communication skills. Proficiency in Auto CAD, Microsoft Excel, Microsoft Word, and other relevant engineering/design software.

<ul><li><p>Conduct comprehensive pediatric dental examinations and consultations. Develop individualised treatment plans for children and adolescents. Deliver preventive, restorative, and therapeutic dental care. Manage dental caries and early childhood oral health conditions. Perform pediatric dental procedures in accordance with best clinical practice. Apply behaviour management techniques to support a positive patient experience. Educate parents and caregivers regarding oral hygiene and preventive care. Assess and manage children with special healthcare needs where appropriate. Collaborate with pediatricians and multidisciplinary healthcare professionals. Maintain accurate DHA-compliant clinical records and documentation. Participate in quality improvement and continuing professional development initiatives.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Essential Requirements DHA, DOH (HAAD), or MOH Licensed Specialist Pediatric Dentist. Recognised specialist qualification in Pediatric Dentistry. Minimum 3 years' specialist-level pediatric dentistry experience preferred. Strong experience treating infants, children, and adolescents. Experience in restorative and preventive pediatric dentistry. Strong behaviour management and communication skills. Excellent patient and parent engagement skills. Fluent English language skills. Arabic language skills highly desirable. Preferred Experience Children's dental clinics. Hospital dental departments. Special healthcare needs dentistry. Sedation or behaviour management experience. Community oral health and preventive programmes. Multidisciplinary pediatric healthcare environments. Pediatric dentistry frequently supports children with behavioural, medical, developmental, and special healthcare needs.</p></li></ul>

<ul><li><p>Lead technical development of utility-scale and commercial BESS projects.</p></li><li><p>Perform BESS sizing and optimization studies based on load profiles, renewable generation, and grid requirements.</p></li><li><p>Conduct feasibility studies and technical assessments.</p></li><li><p>Review BESS system architecture, PCS, EMS, SCADA, and auxiliary systems.</p></li><li><p>Support grid integration and interconnection studies.</p></li><li><p>Review and capable of design of HV, MV, and LV electrical systems.</p></li><li><p>Review substation designs including transformers, switchgear, protection and control systems.</p></li><li><p>Review EPC and OEM engineering deliverables.</p></li><li><p>Provide technical support during procurement, construction, testing, and commissioning.</p></li><li><p>Support FAT, SAT, and performance testing activities.</p></li><li><p>Identify technical risks and recommend mitigation measures.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Electrical Engineering.</p></li><li><p>5–8 years of experience in BESS, power systems, renewable energy, or energy storage projects. Must have minimum 03 years of BESS proejcts experince with preffered GCC experience.</p></li><li><p>Demonstrated experience in BESS sizing, design review, feasibility studies, and construction support.</p></li><li><p>Good understanding of grid codes, grid connection requirements, and power system studies.</p></li><li><p>Experience with utility-scale renewable energy projects.</p></li></ul><p>Technical Skills</p><ul><li><p>Battery Energy Storage Systems (BESS)</p></li><li><p>Grid Integration Studies</p></li><li><p>Load Flow Analysis</p></li><li><p>Short Circuit Studies</p></li><li><p>Protection Coordination</p></li><li><p>Substation Engineering</p></li><li><p>HV/MV Electrical Systems</p></li><li><p>SCADA and EMS Systems</p></li><li><p>Renewable Energy Integration</p></li></ul><p>Software Skills</p><ul><li><p>DIgSILENT PowerFactory</p></li><li><p>ETAP</p></li><li><p>PSS/E</p></li><li><p>PSCAD</p></li><li><p>HOMER Pro</p></li><li><p>PVsyst</p></li><li><p>AutoCAD</p></li><li><p>Microsoft Office Suite</p></li></ul><p>Preferred Experience</p><ul><li><p>Solar PV, Wind, and Hybrid Renewable Projects</p></li><li><p>Owner's Engineer and Technical Advisory assignments</p></li><li><p>Middle East utility-scale projects</p></li><li><p>Knowledge of IEC, IEEE, NFPA, UL, and utility standards</p></li></ul>

The Senior Engineer - Plant & Machinery is responsible for ensuring the reliable operation, maintenance, and continuous improvement of plant machinery and equipment. The role requires strong technical expertise in mechanical systems, project management capabilities, and leadership skills to drive operational efficiency, equipment reliability, safety compliance, and team performance.<br><br>Key Responsibilities<br><br> Maintenance & Equipment Reliability<br><br>Oversee the maintenance, repair, and troubleshooting of all plant machinery and mechanical equipment.<br><br>Ensure optimal performance, reliability, and availability of plant assets to support uninterrupted operations.<br><br>Develop, implement, and continuously improve preventive and predictive maintenance programs for critical equipment.<br><br>Conduct root cause analysis (RCA) for equipment failures and recurring issues, and implement effective corrective and preventive actions.<br><br>Monitor equipment performance and recommend upgrades or modifications to improve reliability and efficiency.<br><br> Project Management<br><br>Lead machinery installation, commissioning, upgrade, replacement, and modernization projects.<br><br>Develop project plans, schedules, budgets, and resource requirements to ensure successful project delivery.<br><br>Coordinate with Operations, Engineering, Procurement, and external vendors to ensure smooth project execution.<br><br>Ensure projects are completed safely, on time, within budget, and in accordance with technical specifications.<br><br> Continuous Improvement & Operational Excellence<br><br>Identify opportunities to improve equipment performance, reduce downtime, and optimize maintenance costs.<br><br>Drive continuous improvement initiatives focused on productivity, asset utilization, and operational efficiency.<br><br>Implement best practices in reliability engineering, maintenance management, and asset lifecycle management.<br><br>Analyze maintenance data and performance trends to support informed decision-making and process improvements.<br><br> Health, Safety & Compliance<br><br>Ensure compliance with all applicable safety regulations, company policies, and maintenance procedures.<br><br>Verify that plant machinery operates within established safety, environmental, and operational standards.<br><br>Lead machinery-related risk assessments, audits, inspections, and safety reviews.<br><br>Promote a strong safety culture and ensure adherence to safe work practices across maintenance activities.<br><br> Team Leadership & Development<br><br>Lead, mentor, and develop engineers, supervisors, and technicians to build a high-performing maintenance team.<br><br>Provide technical guidance and support to resolve complex equipment issues.<br><br>Foster a collaborative work environment that encourages innovation, knowledge sharing, and continuous learning.<br><br>Work closely with production and operations teams to align equipment capabilities with production requirements and business objectives.<br><br> Documentation & Reporting<br><br>Maintain accurate records of maintenance activities, equipment repairs, service histories, and asset performance.<br><br>Prepare and present regular reports on equipment reliability, downtime, maintenance costs, and key performance indicators (KPIs).<br><br>Ensure proper documentation of machinery manuals, technical specifications, maintenance procedures, and upgrade records.<br><br>Utilize CMMS and other maintenance management systems to track and optimize maintenance activities.<br><br>Qualifications & Experience<br><br>Bachelor's Degree in Mechanical Engineering or a related discipline.<br><br>Minimum 8-12 years of experience in plant maintenance, machinery engineering, or industrial operations.<br><br>Proven experience in managing maintenance operations, equipment reliability, and capital projects within industrial or manufacturing environments.<br><br>Strong knowledge of mechanical systems, rotating equipment, pumps, compressors, conveyors, and other plant machinery.<br><br>Experience with preventive, predictive, and reliability-centered maintenance practices.<br><br>Familiarity with CMMS, maintenance planning tools, and asset management systems.

<br><br><ul><li><p>Prepare detailed drawings for civil works.</p></li><li><p>Update drawings based on engineer review, site feedback, or design modifications.</p></li><li><p>Ensure drawings accurately reflect project requirements and specifications.</p></li><li><p>Work closely with engineers to convert design concepts into accurate drawings.</p></li><li><p>Assist in preparing drawings for client approval, authority submissions, or project</p></li><li><p>documentation.</p></li><li><p>Coordinate with site teams to incorporate field conditions into updated drawings.</p></li><li><p>Maintain organized drawing files and version control.</p></li><li><p>Ensure all drawings comply with company standards, UAE regulations, and project</p></li><li><p>requirements.</p></li></ul><p><br>Diploma or bachelor’s degree in civil engineering or related field.</p><ul><li><p>Minimum 5-10 years of experience producing engineering drawings.</p></li><li><p>Proficiency in AutoCAD, Civil 3D modeling software.</p></li><li><p>Basic understanding of civil, geotechnical, and traffic engineering principles.</p></li><li><p>Excellent attention to detail and ability to work under tight deadlines.</p></li><li><p>Experience producing drawings for civil infrastructure, geotechnical works, or traffic</p></li><li><p>management projects.</p></li><li><p>Ability to coordinate with multidisciplinary engineering teams and site staff.</p></li><li><p><strong>Candidates must have UAE experiences in infrastructure projects</strong></p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Draftsman to support our Technical Center for major infrastructure projects. The candidate will be responsible for producing accurate and detailed drawings for civil works, as well as updating drawings based on engineer feedback and site conditions. The role requires close collaboration with engineers to ensure drawings meet project specifications and UAE regulations and candidates must have UAE experiences in infrastructure projects.</p>

<ul><li><p><strong>Our Nursing Vision:&nbsp;</strong>At NMC Healthcare, we are committed to providing clinical excellence through safe, compassionate, and individualized care to every patient, every time.</p><p><strong>Our Nursing Mission:</strong> To exemplify clinical excellence, every NMC nurse will seek to:</p><ul><li><p>Do the right thing</p></li><li><p>Be the patient’s advocate</p></li><li><p>Be open and transparent</p></li><li><p>Deliver safe, compassionate care</p></li><li><p>Recognize the uniqueness of each patient</p></li><li><p>Contribute to an outstanding patient’s experience</p></li><li><p>Engage with and contribute to, a learning culture</p></li><li><p>Lead and influence changes in healthcare</p></li></ul><p><strong>Our Nursing Values:</strong> We will achieve this through our core values:</p><ul><li><p>Safety</p></li><li><p>Excellence</p></li><li><p>Ethics</p></li><li><p>Trust</p></li><li><p>Collaboration</p></li></ul><p>The post holder will work collaboratively with other team members, uphold and live the NMC Nursing Strategy in order to provide safe and outstanding care to their patient,&nbsp;to the patient's bystanders all the time, every time.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Essential:&nbsp;</strong><em>the post holder must</em></p><ul><li><p>Have an appropriate license to work as a&nbsp;registered nurse in the relevant regulatory health authority with all the&nbsp;qualifications and experience these mandates.</p></li><li><p>Manage their own professional re-licensure.</p></li><li><p>Hold a valid American Heart Associatio<strong>n</strong> Basic Life Support Provider card.</p></li><li><p>Be willing to work across departments when necessary. &nbsp;</p></li><li><p>Be able to communicate clearly and effectively in English (spoken and written)</p><br></li></ul><p><strong>DESIRABLE: The post holder <em>should have</em>:</strong></p><ul><li><p>Evidenced ability to work as part of&nbsp;an inter-professionalteam.</p></li><li><p>Organizational and administrative skills with which to use the electronic medical record platform for clinical documentation.</p></li><li><p>Be able to communicate effectively in Arabic</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>you will be responsible for the management, maintenance, and support of our Linux-based server environments.<br> This role requires expertise in configuring and troubleshooting system issues, ensuring high availability and performance, and implementing best practices for security and efficiency.<br> Key Responsibilities: Install, configure, and maintain Linux operating systems on physical and virtual servers.<br> Monitor system performance, troubleshoot issues, and optimize server configurations for maximum efficiency.<br> Implement and manage backups, disaster recovery, and security updates.<br> Automate routine maintenance tasks using scripting languages (e.<br>g., Bash, Python).<br> Collaborate with development and network teams to ensure the seamless deployment and integration of applications.<br> Provide technical support and guidance to users and IT staff regarding Linux systems.<br> Maintain detailed documentation of system configurations, procedures, and changes.<br> Participate in capacity planning and system upgrades, ensuring minimal downtime.<br> Stay updated with the latest Linux technologies and industry trends.<br> Bachelor's degree in Computer Science, Information Technology, or a related field.<br> 4+ years of experience as a Linux Administrator or similar role.<br> Strong knowledge of Linux operating systems (e.<br>g., Red Hat, Ubuntu, CentOS).<br> Experience with server management, monitoring, and troubleshooting.<br> Proficiency in shell scripting and automation tools.<br> Familiarity with networking concepts, security best practices, and cloud services.<br> Excellent problem-solving skills and attention to detail.<br> Strong communication skills, both verbal and written.<br> Relevant certifications (e.<br>g., RHCE, CompTIA Linux+) are a plus.<br> #LI-RK1</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Overview</b></p><p><br></p><p>We are looking for an experienced Security Systems Design Engineer to join our team in Dubai. The ideal candidate will have a strong background in designing electronic security systems and hands-on experience with SIRA regulations and approval processes.</p><p><br></p><p><b>Key Responsibilities</b></p><p><br></p><p>-Design CCTV, Access Control, Intrusion Alarm, Video Intercom, ANPR, and other security systems.</p><p>-Prepare AutoCAD drawings, system schematics, BOQs, technical specifications, and design documentation.</p><p>-Ensure all designs comply with SIRA requirements and relevant international standards.</p><p>-Conduct site surveys and develop cost-effective security solutions.</p><p>-Coordinate with clients, consultants, architects, and project teams.</p><p>-Prepare technical submittals and support SIRA approval processes.</p><p>-Provide technical support during project execution and respond to consultant comments.</p><p><br></p><p><b>Requirements</b></p><p><br></p><p>-Bachelor's Degree or Diploma in Electrical, Electronics, or a related Engineering discipline.</p><p>-Minimum 3 years of experience in security systems design.</p><p>-Mandatory experience with SIRA-compliant design and approval procedures.</p><p>-Strong knowledge of CCTV, Access Control, Intrusion Alarm, Video Intercom, and ELV systems.</p><p>-Proficiency in AutoCAD and Microsoft Office.</p><p>-Good understanding of IP networking related to security systems.</p><p>-Excellent communication, problem-solving, and organizational skills.</p><p>-Preferably SIRA Cadets</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Skills</p><ul><li>Security Systems Design</li><li>SIRA Regulations &amp; Compliance</li><li>AutoCAD</li><li>Bill of Quantities (BOQ) Preparation</li><li>Technical Documentation &amp; Submittals</li><li>Security System Layouts &amp; Schematics</li><li>IP Networking Fundamentals</li><li>Structured Cabling Design</li><li>Site Survey &amp; System Assessment</li><li>Tender &amp; Estimation Support</li><li>Project Coordination</li><li>Problem Solving &amp; Analytical Skills</li></ul><p><br></p></div>

<p><strong><u>Main Responsibilities</u></strong></p><ul><li>Performs nutritional screening. Assess individual patient’s nutritional needs, diet restrictions and current health plans.</li><li>Provides support to the Medical Practitioners by following up with the patient’s evaluation reports. Consult with physicians and health care personnel to determine nutritional needs and diet restrictions of patient or client.</li><li>Develop, customize and implement nutrition programs and dietary-care plans for patients. Provides patients with diet-related advice and nutritional counseling for diet, weight loss, cholesterol reduction, and healthy lifestyle plans.</li><li>Advise patients and their families on nutritional principles, dietary plans and diet modifications, and food selection and preparation.</li><li>Counsel individuals and groups on basic rules of good nutrition, healthy eating habits, and nutrition monitoring to improve their quality of life.</li><li>Participates in implementing standard operating procedures and protocols relating to patient care services.</li><li>Timely complete the yearly Performance Management review cycles.</li><li>Participating in external Information events to create awareness on healthy living.</li><li>Maintain an appropriate level of continuous professional development.</li><li>Attend and participate in regular departmental activities, meetings and/or reports</li></ul><p><strong><u>Skills,Experience and Education</u></strong></p><p><strong><u>Education</u></strong></p><ul><li>Minimum Bachelor of Science in Dietetics or Bachelor Degree in a Health Science with a major in Nutrition and Post-graduate diploma or master in Dietetics.</li></ul><p><strong>&nbsp;Experience</strong></p><ul><li>At least two (2) years of experience as Clinical Dietician in a healthcare facility.</li><li>Experience in bariatric counselling.</li></ul><p><strong><u>Job Specific Skills and Abilities</u></strong></p><ul><li>Demonstrates positive attitude, passion and pride in their work.</li><li>Ability to work independently and as a team player.</li><li>Ability to maintain confidentiality.</li><li>Conversant in Arabic is an advantage.</li></ul><p><br></p><p><br></p><p><br></p><p><br></p><p><br></p><p><br></p><p><br></p><p><br></p>

Position: Electro-Mechanical In-Charge (Maintenance) Location: Dubai, United Arab Emirates Company: Hassani Group of Companies Department: Engineering & Maintenance Employment Type: Full-Time About the Role Hassani Group of Companies is seeking an experienced and proactive Electro-Mechanical In-Charge to oversee the maintenance and reliability of our production machinery. The ideal candidate will have strong expertise in PLC programming, industrial automation, electrical systems, and mechanical maintenance, ensuring maximum equipment availability while minimizing production downtime. Key Responsibilities Lead preventive, predictive, and corrective maintenance activities for production equipment. Perform PLC programming, troubleshooting, modifications, and fault diagnosis. Diagnose and repair electrical, mechanical, pneumatic, and control system faults. Ensure smooth operation of production lines by minimizing equipment downtime. Analyze recurring equipment failures and implement permanent corrective actions. Supervise maintenance technicians and allocate daily maintenance tasks. Plan and execute preventive maintenance schedules. Read and interpret electrical drawings, wiring diagrams, P&IDs, and machine manuals. Install, commission, and optimize new machinery and production equipment. Maintain PLCs, HMIs, VFDs, sensors, motors, control panels, and industrial instrumentation. Coordinate with production teams to schedule maintenance with minimal operational disruption. Maintain maintenance records, breakdown reports, and spare parts inventory. Ensure compliance with safety regulations, electrical standards, and company procedures. Identify opportunities for process improvement and increased equipment reliability. Required Qualifications Diploma or Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related field. Minimum 5–8 years of industrial maintenance experience. Minimum 3 years in a supervisory or maintenance in-charge role preferred. Experience in manufacturing or production industries. Technical Skills Strong PLC programming and troubleshooting skills (Siemens, Mitsubishi, Omron, Allen-Bradley, Schneider, or equivalent). Knowledge of HMI, SCADA, VFDs, servo drives, and industrial automation systems. Expertise in electrical control panels, MCCs, relays, contactors, circuit breakers, and industrial wiring. Strong mechanical troubleshooting skills involving motors, gearboxes, conveyors, pumps, bearings, pneumatic and hydraulic systems. Ability to read electrical schematics and mechanical drawings. Familiarity with preventive maintenance software (CMMS) is an advantage. Key Competencies Excellent troubleshooting and analytical skills. Strong leadership and team management abilities. Ability to work under pressure during machine breakdowns. Effective communication and coordination skills. Strong problem-solving and decision-making capability. High level of ownership and accountability. Commitment to workplace safety and continuous improvement. What We Offer Competitive salary package. Career growth opportunities within Hassani Group of Companies. Professional and dynamic working environment. Exposure to advanced industrial automation and production technologies. Annual leave and company benefits as per UAE Labour Law.