Electrical Drafts Man Jobs in UAE

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>The Planning Engineer will be responsible for project planning scheduling monitoring and reporting activities to ensure successful project delivery within approved timelines and budgets. The role requires close coordination with project management engineering procurement and construction teams to develop realistic schedules track progress and identify potential delays or risks.</p></li><li><p>Develop detailed project schedules using Primavera P6 or equivalent planning software.</p></li><li><p>Prepare baseline programmes recovery programmes and revised project schedules as required.</p></li><li><p>Monitor project progress and compare actual performance against planned targets.</p></li><li><p>Identify schedule risks delays and critical path activities and recommend corrective actions.</p></li><li><p>Prepare weekly monthly and ad hoc progress reports for management clients and consultants.</p></li><li><p>Coordinate with engineering procurement and construction teams to obtain progress updates and project data.</p></li><li><p>Track manpower equipment and material utilization against project requirements.</p></li><li><p>Assist in the preparation and evaluation of project claims extensions of time and variation related schedules.</p></li><li><p>Participate in project meetings and provide schedule related analysis and recommendations.</p></li><li><p>Prepare project dashboards progress curves manpower histograms and performance reports.</p></li><li><p>Ensure all planning and reporting activities comply with contractual requirements and project objectives.</p></li><li><p>Support project management in forecasting completion dates and resource requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree in Civil Engineering Mechanical Engineering Electrical Engineering Construction Management or a related discipline.</p></li><li><p>Minimum 5 to 8 years of experience in project planning and scheduling within construction EPC industrial or infrastructure projects.</p></li><li><p>Strong proficiency in Primavera P6 is mandatory.</p></li><li><p>Good knowledge of project controls scheduling methodologies and progress measurement techniques.</p></li><li><p>Experience in preparing and maintaining baseline schedules and recovery programmes.</p></li><li><p>Strong analytical and problem solving skills with attention to detail.</p></li><li><p>Proficiency in Microsoft Excel Microsoft Project and other reporting tools.</p></li><li><p>Ability to interpret engineering drawings specifications and project contracts.</p></li><li><p>Excellent communication and coordination skills.</p></li><li><p>Experience working on large scale EPC projects is preferred.</p></li><li><p>UAE experience is preferred.</p></li><li><p>Ability to work under pressure and manage multiple projects simultaneously.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Estimation and Quantity Survey Engineer will be responsible for preparing accurate cost estimates quantity take offs tender submissions and commercial evaluations for construction and EPC projects. The role requires detailed analysis of drawings specifications and contract documents to ensure competitive pricing and effective cost control throughout the project lifecycle.</p><ul><li><p>Review tender documents drawings specifications and contract requirements.</p></li><li><p>Prepare detailed quantity take offs for civil architectural structural mechanical electrical plumbing and infrastructure works.</p></li><li><p>Develop accurate cost estimates and pricing schedules based on project scope and market conditions.</p></li><li><p>Obtain and evaluate quotations from suppliers subcontractors and service providers.</p></li><li><p>Prepare technical and commercial tender submissions within specified deadlines.</p></li><li><p>Conduct cost analysis and value engineering exercises to improve project competitiveness.</p></li><li><p>Assist in preparing project budgets cash flow forecasts and cost plans.</p></li><li><p>Monitor project costs and compare actual expenditures against approved budgets.</p></li><li><p>Prepare variation orders claims and supporting commercial documentation.</p></li><li><p>Evaluate subcontractor payment applications and verify quantities executed on site.</p></li><li><p>Assist in contract administration and commercial management activities.</p></li><li><p>Maintain databases of material costs labour rates subcontractor pricing and historical project data.</p></li><li><p>Coordinate with engineering procurement and project management teams during tendering and execution stages.</p></li><li><p>Support management with commercial reports forecasts and project financial analysis..</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree in Civil Engineering Quantity Surveying Construction Management or a related discipline.</p></li><li><p>Minimum 5 to 8 years of experience in estimation quantity surveying and commercial management within construction or EPC projects.</p></li><li><p>Strong experience in preparing detailed quantity take offs and cost estimates.</p></li><li><p>Excellent understanding of construction methods materials and project execution requirements.</p></li><li><p>Ability to interpret engineering drawings specifications and contract documents.</p></li><li><p>Strong knowledge of tendering procedures contract administration and cost control practices.</p></li><li><p>Proficiency in Microsoft Excel and quantity take off software.</p></li><li><p>Experience with construction management and estimating software is an advantage.</p></li><li><p>Strong analytical numerical and negotiation skills.</p></li><li><p>Excellent communication and commercial awareness.</p></li><li><p>UAE experience is preferred.</p></li><li><p>Ability to manage multiple tenders and projects simultaneously while meeting strict deadlines.</p></li></ul><p></p></section>

<p>Job Overview The Facilities Director will oversee the operational excellence, asset preservation, and luxury service standards across our premium residential real estate portfolio. This role demands a strategic leader who can balance complex engineering systems with white-glove hospitality to ensure an uncompromised resident experience. You will manage daily estate operations, overseeing a full scope of FM services delivered by multiple service providers, to ensure asset integrity and value across all luxury developments. Key Responsibilities: Strategic Leadership & Luxury Experience Establish and maintain five-star hospitality service delivery standards across all areas, internal and external. Implement and scale localized Standard Operating Procedures (SOPs) that align with premium brand values. Lead the transition of newly constructed developments from the construction handover phase to active operational management. Engineering & Lifecycle Operations Deploy and audit Computerized Maintenance Management Systems (CMMS) to optimize predictive maintenance programs. Oversee complex building systems, including specialized MEP (Mechanical, Electrical, Plumbing), central HVAC, automated access control, and smart automation systems. Conduct routine property audits to verify structural integrity, aesthetic perfection, and landscaped area upkeep. Manage emergency planning, business continuity, and rapid-response protocols for all weather or infrastructural disruptions. Financial & Vendor Administration Formulate and control multi-million dollar operating expenses (OpEx) and capital expenditures (CapEx) budgets. Negotiate and manage integrated facilities management (IFM) contracts and specialized boutique vendors. Drive operational efficiency to maximize net operating income (NOI) without compromising development aesthetics. Sustainability & Compliance Introduce and lead eco-friendly initiatives, carbon reduction goals, and green building certifications. Ensure compliance with local laws, municipal safety guidelines, environmental standards, and building codes.</p><p>Required Skills and Qualifications: Education: Bachelor’s degree in Facilities Management, Civil/Mechanical Engineering, or Real Estate Administration. Experience: Minimum of 8–10 years managing luxury assets, luxury hotels, or upscale residential towers. Technical Savvy: Expert knowledge of automated Building Management Systems (BMS), smart home IoT integrations, and advanced HVAC tech. Financial Acumen: Proven experience building complex asset lifecycles, service charge models, and CapEx forecast charts. Soft Skills: Impeccable communication, emotional intelligence, discretion, and the ability to interact comfortably with high-profile clientele.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Mechanical Sales Engineer</p><p>Location: Abu Dhabi, UAE</p><p>Role Summary</p><p>Frontier Petroleum Services is seeking a highly motivated Sales Engineer to expand our customer base, strengthen existing client relationships, identify new business opportunities, and drive revenue growth within ADNOC and EPC contractors operating in the UAE.</p><p>The successful candidate must be technically competent, commercially driven, and capable of independently engaging with clients, understanding their requirements, proposing suitable solutions, and converting opportunities into orders.</p><p>Key Responsibilities</p><ul><li><p>Develop new business opportunities within ADNOC Group companies, EPC contractors, and industrial end users</p></li><li><p>Regularly visit existing clients to identify new requirements and strengthen relationships</p></li><li><p>Prospect and acquire new customers across the UAE oil &amp; gas sector</p></li><li><p>Promote Frontier's principals and product portfolio to engineering, procurement, operations, and maintenance teams</p></li><li><p>Identify project opportunities from early stages and position Frontier's products and solutions</p></li><li><p>Prepare technical and commercial proposals, quotations, and bid submissions</p></li><li><p>Manage enquiries from receipt through quotation, negotiation, and order closure</p></li><li><p>Conduct technical presentations and product demonstrations to clients</p></li><li><p>Coordinate with principals on technical clarifications, pricing, and commercial matters</p></li><li><p>Maintain and grow a healthy sales pipeline through continuous customer engagement</p></li><li><p>Achieve agreed sales and profitability targets</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Instrumentation Engineering, Electrical Engineering, or related field</p></li><li><p>Minimum 4–6 years of experience selling oil &amp; gas equipment and solutions in the UAE</p></li><li><p>Strong technical understanding of valves, instrumentation, flow measurement, automation, mechanical equipment, or related oil &amp; gas products</p></li><li><p>Existing relationships with ADNOC companies, EPC contractors, and industrial end users</p></li><li><p>Proven track record of generating new business and closing orders</p></li><li><p>Strong negotiation, presentation, and communication skills</p></li><li><p>Self-driven, proactive, and capable of working independently</p></li></ul><p>Preferred Background</p><p>Experience dealing with ADNOC, ADNOC Onshore, ADNOC Offshore, ADNOC Gas, NPCC, NMDC Energy, Petrofac, Galfar, Target Engineering, CPECC, Descon, Technip Energies, and similar organizations.</p><p>Key Objective</p><p>Expand Frontier's customer base, increase sales revenue, strengthen relationships with existing customers, and identify new opportunities for Frontier's principals and solutions across the UAE market.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Associate Engineer (Senior Field Installation &amp; Maintenance Technician) to lead and execute field installation, maintenance, and troubleshooting activities for CCTV systems, networking infrastructure, structured cabling, industrial racks, and field enclosures. The role requires extensive travel to industrial, offshore, onshore, and remote project locations and involves supervising technicians to ensure safe, high-quality project execution.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><p><strong>Installation &amp; Field Execution</strong></p><ul><li><p>Lead installation teams for CCTV systems, networking equipment, structured cabling, industrial racks, and field enclosures.</p></li><li><p>Supervise CAT6A cable laying, conduit routing, cable dressing, and termination activities.</p></li><li><p>Perform drilling, coring, anchoring, and mounting of cameras, brackets, racks, and heavy equipment.</p></li><li><p>Install and secure explosion-proof (Ex/ATEX-rated) enclosures, racks, glands, and accessories.</p></li><li><p>Coordinate lifting, positioning, and installation of heavy equipment and fabricated structures.</p></li><li><p>Ensure proper use of lock pins, slings, clamps, safety nets, and dropped-object prevention systems.</p></li><li><p>Guide technicians during installation, testing, and troubleshooting activities.</p><br></li></ul><p><strong>Maintenance &amp; Troubleshooting</strong></p><ul><li><p>Troubleshoot CCTV systems, PoE devices, networking equipment, power distribution systems, and related hardware.</p></li><li><p>Support dismantling, relocation, and reinstallation of field equipment.</p></li><li><p>Conduct preventive maintenance inspections, tightening checks, corrosion assessments, and physical verification activities.</p></li><li><p>Ensure proper grounding, bonding, and cable management practices.</p></li></ul><br><p><strong>Coordination &amp; Documentation</strong></p><ul><li><p>Coordinate with engineers, HSE personnel, electricians, rigging teams, and client representatives.</p></li><li><p>Verify installation quality against drawings, specifications, and project standards.</p></li><li><p>Assist with preparation of installation reports, maintenance records, and red-mark drawings.</p></li><li><p>Manage site tools, materials, and consumables.</p></li></ul><br><p><strong>Safety &amp; Compliance</strong></p><ul><li><p>Ensure compliance with HSE policies, Permit-to-Work systems, and working-at-height procedures.</p></li><li><p>Conduct toolbox talks and safety briefings when required.</p></li><li><p>Monitor safe operation of power tools, lifting equipment, and handling of heavy materials.</p></li></ul><br><p><strong>Qualifications &amp; Experience</strong></p><ul><li><p>Diploma or Technical Certification in Electrical, Electronics, Telecommunications, or a related discipline.</p></li><li><p>5–8 years of experience in CCTV, networking, telecom, industrial installations, or maintenance projects.</p></li><li><p>Strong hands-on experience in structured cabling, industrial installations, and troubleshooting.</p></li><li><p>Experience leading technicians or small field teams.</p></li><li><p>Knowledge of industrial and hazardous-area installation practices.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking an experienced Resident Engineer for building supervision to join our team in Abu Dhabi, United Arab Emirates. In this role, you will serve as the on-site representative responsible for overseeing construction activities, ensuring compliance with design specifications, and maintaining the highest standards of quality and safety throughout the project lifecycle. The ideal candidate will demonstrate strong technical expertise, exceptional organizational skills, and the ability to make decisive decisions in a fast-paced construction environment.</p><br><ul><li>Conduct daily site inspections to monitor construction progress, quality of workmanship, and adherence to approved plans and specifications</li><li>Verify that all construction activities comply with relevant building codes, safety regulations, and project requirements</li><li>Review and approve construction materials, equipment, and installation methods before implementation</li><li>Maintain comprehensive site documentation, including daily reports, inspection records, photographs, and correspondence</li><li>Coordinate with contractors, subcontractors, architects, and engineers to resolve technical issues and ensure seamless project execution</li><li>Identify and document any deviations from design specifications and recommend corrective actions</li><li>Monitor Health, Safety, and Environment (HSE) compliance and report any incidents or hazards</li><li>Prepare progress reports and communicate project status to project management and stakeholders</li><li>Manage site logistics, including material storage, equipment placement, and traffic flow</li><li>Conduct quality assurance testing and inspections on structural, mechanical, electrical, and plumbing systems</li><li>Maintain accurate records of site activities, changes, and approvals for project archives</li><li>Collaborate with the project team to develop and implement solutions for construction challenges</li></ul><br>Qualifications<br><ul><li>Minimum of 15 years post-undergraduate experience plus 5 years in a senior technical position.</li><li>Bachelor Degree in relevant Engineering field (i.e. Civil, Structural etc) and PMP preferable, plus membership of a recognized professional institution preferred</li><li>Strong knowledge of construction methodologies, building codes, and industry standards</li><li>Proficiency in interpreting architectural and engineering drawings and specifications</li><li>Demonstrated expertise in quality control and quality assurance processes</li><li>Solid understanding of structural, mechanical, electrical, and plumbing (MEP) systems</li><li>Experience with construction management software and digital documentation tools</li><li>Excellent communication and interpersonal skills with the ability to coordinate multiple stakeholders</li><li>Strong analytical and problem-solving abilities with attention to detail</li><li>Knowledge of Health, Safety, and Environment (HSE) regulations and best practices</li><li>Proficiency in preparing technical reports and site documentation</li><li>Familiarity with UAE construction standards, regulations, and local building codes (preferred)</li><li>Experience with Building Information Modeling (BIM) software (preferred)</li><li>Background in high-rise or complex building projects (preferred)</li><li>Leadership and team coordination experience (preferred)</li><li>Proficiency in Microsoft Office Suite and project management tools</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<ul><li><p>Follow the SOP, Quality and HSE Guidelines of designated Machinery to achieve optimum result, Product safety and safe usage of machinery and personnel safety. Follow the cleaning and caring of the machinery designated to the Operator and report any breakdown and loss of productivity to Maintenance Technicians and Production Supervisor in appropriate Breakdown reports. Do not allow unauthorized usage of designated machinery to avoid damage to machine, product safety and personnel safety. Achieve production plan within the specified time with a commitment to quality instruction in the production process. Comply with all the instructions to the inner workings of the production department during client productivity. Commitment to public safety instructions on production lines and facilities. Follow up the implementation of all production work on the production line in accordance with the production plan contained. Follow the rules of quality and food safety; the public followed the instructions and quality control (QC in the production process). Receive raw materials from the warehouse/ Process steps and follow signals and instructions, follow up the development of these materials and arrange them properly and as directed by the production Supervisor/ Process flow.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>A minimum of 1 years of progressive experience in a manufacturing or industrial setting, with a focus on machine operation and maintenance.</p></li><li><p>Proven experience with PLC programming and troubleshooting, along with proficiency in diagnostic software.</p></li><li><p>Certification in relevant areas such as industrial maintenance, electrical safety, or specific machinery operation.</p></li></ul>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a General Technician, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Maintain hotel facilities: Ensure physical functionality and safety of the property, including guest rooms, public spaces, and heart-of-house areas Respond to service requests: Quickly handle guest calls and team member work orders Perform a variety of maintenance tasks: Conduct repairs and maintenance across various areas, including carpentry, plumbing, electrical, HVAC, and masonry Conduct preventive maintenance inspections: Regularly inspect facilities and equipment to identify and address preventive maintenance needs Document maintenance activities: Record completed inspections and repairs and flag any issues requiring further attention<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Sales Manager for Iraq, Syria, Libya &amp; Levant Countries Location: Abu Dhabi, UAE Department: SI EA S CP About Siemens At Siemens, we know that a business thrives only when its people are thriving. Our global and diverse team is committed to supporting your growth and helping you achieve your full potential. Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies to create resilient, connected, and sustainable infrastructure. By connecting the physical and digital worlds through data and analytics, we help customers optimize energy systems and building operations, making them safer, more efficient, and more sustainable. Join our Smart Infrastructure team as a Sales Manager and help shape the future by delivering innovative solutions that transform everyday life. Position Summary The Sales Manager will be responsible for driving business growth, increasing order intake, and achieving revenue targets across the assigned territories of Iraq, Syria, Libya, and the Levant region. The role requires managing channel partners and key stakeholders, developing new business opportunities, supporting customers with technical expertise, and promoting Siemens' Control Products portfolio, including protection relays, RTUs, power quality meters, and digital fault recorders. The successful candidate will combine strong commercial acumen with a solid technical understanding of power system protection and automation technologies. Key Responsibilities Sales Growth &amp; Business Development Achieve assigned order intake, revenue, and profitability targets across the designated territories. Develop and execute regional sales strategies aligned with business objectives. Identify, qualify, and pursue new business opportunities within target markets. Build and maintain a healthy sales pipeline through effective opportunity management and forecasting. Develop market-driven strategies based on customer needs, industry trends, and competitive intelligence. Channel Partner Management Manage and expand relationships with channel partners, distributors, system integrators, panel builders, EPC contractors, OEMs, and third-party intermediaries. Identify, onboard, and develop new channel partners to strengthen market coverage and drive growth. Support partners with technical guidance, sales planning, product training, and business development initiatives. Collaborate with partners to maximize market penetration and customer engagement. Customer Engagement Establish and maintain strong relationships with end users, consultants, utilities, industrial customers, and key decision-makers. Conduct regular customer visits and presentations to enhance customer satisfaction and increase market visibility. Understand customer requirements and provide value-driven solutions that address their operational and business needs. Promote customer-centric engagement practices to build long-term partnerships. Technical Sales Support Provide technical expertise on protection relays, RTUs, power quality meters, digital fault recorders, and associated automation solutions. Advise customers on protection schemes and applications for feeders, transformers, generators, motors, busbars, and substations. Support technical discussions related to IEC 61850, digital substations, process bus architecture, redundancy concepts, cybersecurity, RTU/HMI integration, and power automation systems. Coordinate with local and global technical teams to ensure timely resolution of customer and partner requirements. Tendering &amp; Proposal Management Support and coordinate tendering activities, including RFQ evaluation, technical clarifications, and bid preparation. Prepare and negotiate commercial and technical proposals in collaboration with proposal management, finance, and execution teams. Ensure proposals meet customer requirements while maintaining compliance with Siemens policies and profitability objectives. Planning, Reporting &amp; Compliance Utilize Salesforce CRM for opportunity management, forecasting, reporting, and sales planning. Maintain accurate sales forecasts and customer records. Follow defined business processes and ensure compliance with company policies, ethical standards, and regulatory requirements. Provide regular market intelligence, competitive insights, and business updates to management. Marketing &amp; Product Promotion Support product launches, campaigns, and promotional activities within the assigned territories. Organize and participate in customer seminars, technical workshops, conferences, and industry events. Increase market awareness and strengthen Siemens' brand presence through targeted customer engagement activities. Requirements Education Bachelor's degree in Electrical Engineering or a related field. Experience 5 to 10 years of techno-commercial sales experience within the electrical power, protection, control, or automation industry. Experience in the Middle East region is highly preferred. Arabic speaker is preferred Proven track record of achieving sales targets and driving business growth in B2B environments. Experience working with channel partners, distributors, EPCs, OEMs, panel builders, and system integrators. Technical Knowledge Strong knowledge of protection relays, RTUs, power quality meters, digital fault recorders, and power automation solutions. Solid understanding of power system protection principles and applications. Familiarity with digital substations, IEC 61850, SCADA, HMI, communication protocols, process bus architectures, and cybersecurity concepts. Ability to discuss technical solutions confidently with both engineering and commercial stakeholders. Travel This role requires undertaking regular business travel within the assigned territories to support customers, partners, and business development activities. What We Offer Flexible mobile working arrangements (2 to 3 days per week as a global standard). Diverse, inclusive, and collaborative work environment. Opportunities for personal and professional development. Access to extensive learning and development programs. A culture where everyone can bring their authentic selves and feel a sense of belonging. Transform the Everyday with Us If you are passionate about driving growth, building customer relationships, and delivering innovative power automation solutions, we encourage you to apply and join Siemens in shaping a more sustainable future. Siemens is committed to diversity, equity, and inclusion. We welcome applications from all qualified candidates and provide equal employment opportunities regardless of background. Reasonable accommodations are available throughout the recruitment process for candidates with disabilities. Please note: Only complete applications will be considered during the selection process.</span> </div>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a General Technician, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Maintain hotel facilities: Ensure physical functionality and safety of the property, including guest rooms, public spaces, and heart-of-house areas Respond to service requests: Quickly handle guest calls and team member work orders Perform a variety of maintenance tasks: Conduct repairs and maintenance across various areas, including carpentry, plumbing, electrical, HVAC, and masonry Conduct preventive maintenance inspections: Regularly inspect facilities and equipment to identify and address preventive maintenance needs Document maintenance activities: Record completed inspections and repairs and flag any issues requiring further attention<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

Job Description<br><br>The Engineer/Core Network Maintenance role is critical to ensuring the smooth operation and maintenance of our fixed transport network infrastructure. You will be responsible for a range of activities, including traffic management, network maintenance, and site quality assurance. Your expertise will contribute to the overall reliability and performance of our network, ensuring a seamless experience for our customers.<br><br>Responsibilities<br><br>Depending upon the assignment, the jobholder performs all or any of the following provision/ maintenance & fault rectification functions in respectof the assigned Core Network elements- (DWDM/IP-CORE EQUIPMENT/GPON network), ensuring conformance to the prescribed standards and procedures. Carries out simple and routine provision/maintenance & fault rectification tasks in respect of the assigned Core(OTN /IP CORE Nodes) and Fixed Network elements (GPON), attends to the assigned major/non-routine tasks independently. Assists in carrying out the prescribed routine tests using different types of test equipment. Implements the fault rectification procedures of equipment, ensures conformance to the prescribed standards and procedures. Support maintenance activities including requisitioning, receiving, acceptance testing, mobilization to work site, handling store issue and utilizatio of spares, tools and equipment. Attends and clears faults reported by NOC teams. Furthermore, informs the major faults to superiors for review. Assists in locating and clearing Junction F. O Cable Network faults. Work in shifts and attend assigned duties including call-out/emergencies. To be able to use craft terminal/test equipment to access & localize faults. Maintains and updates records in section DB. Demonstrates initiative in updating knowledge and skills in respect of the new equipment technology introduced to core networks. Undertakes full responsibility of equipment in his work area based on the scope assigned to him.<br><br>Qualifications<br><br> Bachelor's degree in Electrical/Electronic Engineering, Computer Science, or a related field. Fresh graduate with academic knowledge in telecom network operations and maintenance, including Transport, IP Switching, GPON, and Mobile networks. Strong knowledge of fixed transport networks, IP-Core, and Access Equipment (GPON) technologies. Hands-on experience with network maintenance tools and equipment, including testing and troubleshooting. Excellent problem-solving and analytical skills, with the ability to identify and resolve complex network issues. Good understanding of network protocols, routing, and switching concepts. Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse teams. Willingness to work in a dynamic and fast-paced environment, adapting to changing priorities. Valid driving license and ability to travel within the assigned zone as required. Proficiency in relevant software and tools for network management and documentation.

Roles, Responsibilities, Duties Inspect the apartment in the end of lease within the agreed time frame. Evaluate the condition of the apartment. Fix the scope of works to restore the apartment to high quality. Identify tenant violations from the total scope of works. Negotiate with the service provider for best price. Check the cleanliness and health of the building, store rooms, plant rooms and surroundings Verify PPM activities being completed in a safe and professional way. Inspect aesthetics of the building Inspect all MEP assets and verify its conditions and performance. Prepare detailed report and sent to FM Service providers for rectification. Ensure all works in the community are being completed in a safe and professional way. Ensure the FM service providers are completing the works under the SLAs and KPIs. Cross check and verify variation job proposals from FMSPs and approve the work completion reports. Verify and certify all supporting documents submitting by FMSPs for invoicing. Obtain weekly utility consumption details from FMSPs and analyse Find out the variation and ask acceptable justification from FMSPsStudy the trend and find out the root causes for the variation Rectification of any abnormalities which causes the high consumption Ensure the precautionary measures are being taken and implemented by FMSPs for controlling the consumption Recommend energy saving initiatives to client. Maintain the monthly compliance tracker Verification of all statutory certificates and ensure all are valid Follow up for the renewal of the expired certificates proactively Study the latest norms from local authorities and suggest cost effective methods to clients Coordinate with FM Service provider & Building main contractor to close out all snags during DLP period. Attend all testing & commissioning events in the building as part of DLP management. Attend all trainings as part of take over the asset or system as part of DLP management. Ensure the complete snags has been taken & rectified successfully on time. Manage & maintain technical library & attic stocks in the building. Work closely with leasing department for smooth handing over of each residential & retail units to the tenant. Manage all fit-out works in the retail units & ensure it is progressing as per the authority regulations & within agreed time frame. Assist the stake holders with technical advices upon request. Check the quality of building cleaning & hospitality regularly. Monitor security services and validate incident reports. Report the incident to insurance provider timely for claiming & follow up till the work completed.<br>Qualification: Engineering Degree/ Diploma in Civil/ Mechanical / Electrical (Mandatory) Valid UAE Driving License UAE National only with Family book<br>Experience and Skills:Fresh Engineering Graduates who have completed their degree

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br><p>In alignment with our Microsoft values, we are committed to cultivating an inclusive work environment for all employees to positively impact our culture every day and we need you as a Critical Environment Program Manager</p><br><p>Microsoft’s Cloud Operations &amp; Innovation (CO+I) is the engine that powers our cloud services. As a Critical Environment Program Manager you will perform a key role in delivering the core infrastructure and foundational technologies for Microsoft's online services including Bing, Office 365, Xbox, OneDrive, and the Microsoft Azure platform. As a group, CO+I is focused on the personal and professional development for all employees and offers trainings and growth opportunities including Career Rotation Programs, Diversity &amp; Inclusion trainings and events, and professional certifications.&nbsp;</p><br><p>Our infrastructure is comprised of a large global portfolio of more than 100 datacenters and 1 million servers. Our foundation is built upon and managed by a team of subject matter experts working to support services for more than 1 billion customers and 20 million businesses in over 90 countries worldwide.&nbsp;&nbsp;</p><br><p>With environmental sustainability and optimization at the forefront of our datacenter design and operations, we continue to grow and evolve as we meet the ever-changing business demands that hold Microsoft as a world-class cloud provider.&nbsp;&nbsp;</p><br><p>Do you want to empower billions across the world? Come and join us in CO+I and be at the forefront of the action!&nbsp;</p><br><br><b>Responsibilities</b><br><p>Data Center Operations&nbsp;</p><br><ul><li><p>Ensures compliance with data center business units and service-level policies.&nbsp;&nbsp;</p><br></li><li><p>Engages with appropriate teams and resources to execute tasks or projects.&nbsp;&nbsp;</p><br></li><li><p>Manages programs associated with area of responsibility.&nbsp;&nbsp;</p><br></li><li><p>Demonstrates conscientiousness on cost adheres to budget requirements; keeps costs reasonable and contributes to staying within budget.&nbsp;</p><br></li><li><p>Follows and adheres to safety and security policies and procedures. Reports immediately any safety or security issues or concerns.&nbsp;&nbsp;</p><br></li><li><p>Participates in Root Cause Analysis (RCA) process as appropriate.&nbsp;</p><br></li></ul><p>Service Delivery&nbsp;</p><br><ul><li><p>Maximize Critical Environment (CE) availability in conjunction with our landlord partners at our leased Datacenters and to ensure optimal operational efficiency&nbsp;</p><br></li><li><p>Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in our leased Datacenters (MOP/SOP/EOP review, RCAs, FMEAs, change governance, and risk mitigation)&nbsp;</p><br></li><li><p>Reduce high-impact and human-error Critical Environment (CE) incidents year over year&nbsp;</p><br></li><li><p>Deliver on cost/energy efficiency initiatives&nbsp;&nbsp;</p><br></li><li><p>Support delivery of the Datacenter’s Emergency Preparedness and Response plans and act as an escalation point for all facilities-related issues within our leased datacenters&nbsp;&nbsp;</p><br></li></ul><ul><li><p>Coordinate, plan, schedule, and supervise CE audits and compliance verification as needed&nbsp;</p><br></li><li><p>Ensure routine reporting to effectively manage and analyze our Power/Temperature/Relative Humidity, and SLA monitoring&nbsp;&nbsp;</p><br></li><li><p>Establish and enhance strong working relationships and engagement with our Engineering Groups (EGs), and Landlord partners (including contributing to MBRs, QBRs)&nbsp;</p><br></li><li><p>Work with regional and global peers to share and build best practices across the entire datacenter portfolio&nbsp;</p><br></li></ul><p>Data Center Work Environment&nbsp;</p><br><ul><li><p>Shares best practices; assists others in learning role, process, procedures.&nbsp;&nbsp;</p><br></li><li><p>Provides mentorship across data centers for specific expertise. &nbsp;&nbsp;</p><br></li><li><p>Seeks training opportunities that meet the interest of the business as well as own career goals and objectives.&nbsp;</p><br></li><li><p>Suggests ways for reducing risk of performing maintenance; works with others to accommodate scheduling needs.&nbsp;&nbsp;</p><br></li><li><p>Suggests improvements in implementation based on depth of understanding.&nbsp;&nbsp;</p><br></li><li><p>Contributes to a positive team environment by learning and adopting best practices.&nbsp;&nbsp;</p><br></li><li><p>Contributes constructively during team meetings and in cross-disciplinary collaborations within the service team.&nbsp;&nbsp;</p><br></li></ul><p>Ownership&nbsp;</p><br><ul><li><p>In alignment with management priorities, holds self-accountable for the end-to-end service quality, completeness, and resulting customer experience (including but not limited to availability, safety, security, customer service).&nbsp;&nbsp;</p><br></li><li><p>Supports escalation of issues to appropriate owner.&nbsp;</p><br></li></ul><br><b>Qualifications</b><br><ul><li><p>High School Diploma or equivalent AND 2+ year(s) industry experience in a datacenter or other critical environment facility,&nbsp;</p><br></li></ul><ul><li><p>OR 3+ years industry experience and college course work.&nbsp;</p><br></li></ul><p><strong>Background Check Requirements:&nbsp;</strong></p><br><p>Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings:&nbsp;</p><br><ul><li>Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.</li></ul><p>While not required, we also look for the following Preferred Qualifications:&nbsp;</p><br><ul><li><p>3+ years’ experience in Critical Environment infrastructures (e.g., UPS, Generator, AHU)&nbsp;</p><br></li><li><p>Bachelor’s Degree or Technical College certification in mechanical or electrical engineering and/or services &nbsp;</p><br></li><li><p>Experience working on large scale CE projects  &nbsp;</p><br></li><li><p>Experience with the operation of IT infrastructure (Servers, SANs, Networking, etc.)&nbsp;</p><br></li></ul> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<p>Responsible for the execution and coordination of diesel generator projects from order receipt through engineering, documentation, manufacturing, FAT, delivery, commissioning support, and project close-out. Acts as the primary technical interface between customers, consultants, suppliers, and internal departments to ensure successful project execution.</p><p>Key Responsibilities</p><ul><li><p>Review project specifications, contract documents, and client requirements.</p></li><li><p>Coordinate engineering activities for diesel generator packages.</p></li><li><p>Prepare and review technical documentation, including:</p></li></ul><p>o General Arrangement (GA) Drawings</p><p>o Single Line Diagrams (SLD)</p><p>o Wiring Diagrams</p><p>o Foundation Drawings</p><p>o Fuel System Drawings</p><p>o Fire Detection & Suppression System Drawings</p><p>o O&M Manuals</p><p>o FAT/SAT Procedures</p><p>o Method Statements</p><p>o Inspection & Test Plans (ITP)</p><p>o Quality Plans</p><p>o Certificates of Conformity</p><p>o Warranty Certificates</p><p>o Comment Response Sheets (CRS)</p><ul><li><p>Review consultant comments and coordinate revisions with engineering teams.</p></li><li><p>Liaise with customers, consultants, suppliers, and subcontractors to resolve technical and commercial issues.</p></li><li><p>Monitor manufacturing progress and coordinate with production to meet project schedules.</p></li><li><p>Coordinate Factory Acceptance Tests (FAT), inspections, and customer visits.</p></li><li><p>Coordinate with the client and logistics department to ensure timely deliveries without any issues.</p></li><li><p>Coordinate commissioning activities.</p></li><li><p>Review purchase orders, commercial terms, and payment milestones in coordination with the sales team.</p></li><li><p>Prepare technical clarifications, compliance statements, and deviation reports.</p></li><li><p>Ensure compliance with project specifications, applicable standards, and client requirements.</p></li><li><p>Maintain project documentation and ensure timely submission of engineering documents.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Required Skills</p><ul><li><p>Project coordination</p></li><li><p>Technical documentation</p></li><li><p>Diesel generator systems</p></li><li><p>Mechanical & electrical engineering fundamentals</p></li><li><p>Client and supplier coordination</p></li><li><p>Technical proposal review</p></li><li><p>FAT/SAT coordination</p></li><li><p>Quality documentation</p></li><li><p>Strong written and verbal communication</p></li><li><p>Microsoft Office & AutoCAD</p></li></ul>

Mechanical Draughtsman Gradiant Technology Contracting - L. L. C - S. P. C Abu Dhabi, United Arab Emirates 7/29/26 Engineering<br><br>Gradiant is a Different Kind of Water Company. With a full suite of differentiated and proprietary end-to-end solutions for advanced water and wastewater treatment powered by the top minds in water, the company serves its clients’ mission-critical operations in the world’s essential industries, including semiconductors, pharmaceuticals, food & beverage, lithium and critical minerals, and renewable energy. Gradiant’s innovative solutions reduce water used and wastewater discharged, reclaim valuable resources, and renew wastewater into freshwater. The Boston-headquartered company was founded at MIT and has over 1,400 employees worldwide. Discover us at gradiant.com.<br><br>Role Overview<br><br>We are seeking an experienced 3D Designer with strong expertise in the design and modeling of Water Treatment Plants, Desalination Systems, Wastewater Treatment Plants (WWTP), Sewage Treatment Plants (STP), and packaged treatment units. The candidate will be responsible for developing detailed 3D models, equipment layouts, piping arrangements, and fabrication drawings using industry-standard software such as Auto CAD Plant 3D, Smart Plant 3D (SP3D), Revit, Navisworks, and Auto CAD.<br><br>The ideal candidate should possess hands-on experience in multidisciplinary coordination and detailed engineering for water treatment projects executed for municipal, industrial, oil & gas, or EPC clients.<br><br>Responsibilities<br><br>3D Modeling & Design <br><br>Develop and maintain detailed 3D models for water treatment and process packages. Create equipment layouts, piping models, structural models, piping supports, and utility routing. Perform 3D modeling using:Autodesk Plant 3DSmart Plant 3D (SP3D) Autodesk Revit Navisworks Auto CADPrepare General Arrangement (GA) drawings, plot plans, and equipment layouts. Generate piping isometrics, orthographic drawings, and spool drawings from 3D models.<br>Engineering Coordination<br><br>Coordinate with Process, Mechanical, Civil, Structural, Electrical, and Instrumentation disciplines. Participate in model reviews and clash detection sessions. Resolve interdisciplinary design conflicts and constructability issues. Ensure compliance with project specifications, client requirements, and international standards.<br><br>Drawing & Documentation<br><br>Produce fabrication and construction drawings. Generate BOMs (Bill of Materials) and MTOs (Material Take-Offs). Maintain drawing registers and revision control. Support engineering deliverables throughout project execution.<br><br>Requirements<br><br>Diploma or Bachelor's Degree in Mechanical Engineering, Drafting Technology, Plant Design, or related discipline. Minimum 5-8 years of experience in 3D plant design. At least 3 years of experience in Water Treatment / Wastewater Treatment / Desalination projects. Experience working in EPC, package manufacturing, or process engineering environments. Software Skill: Autodesk Plant 3DSmart Plant 3D (SP3D) Autodesk Revit Auto CAD 2D & 3DNavisworks<br><br>Gradiant is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, gender, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

Mechanical Draughtsman Gradiant Technology Contracting - L. L. C - S. P. C Abu Dhabi, United Arab Emirates 7/29/26 Engineering<br><br>Gradiant is a Different Kind of Water Company. With a full suite of differentiated and proprietary end-to-end solutions for advanced water and wastewater treatment powered by the top minds in water, the company serves its clients’ mission-critical operations in the world’s essential industries, including semiconductors, pharmaceuticals, food & beverage, lithium and critical minerals, and renewable energy. Gradiant’s innovative solutions reduce water used and wastewater discharged, reclaim valuable resources, and renew wastewater into freshwater. The Boston-headquartered company was founded at MIT and has over 1,400 employees worldwide. Discover us at gradiant.com.<br><br>Role Overview<br><br>We are seeking an experienced 3D Designer with strong expertise in the design and modeling of Water Treatment Plants, Desalination Systems, Wastewater Treatment Plants (WWTP), Sewage Treatment Plants (STP), and packaged treatment units. The candidate will be responsible for developing detailed 3D models, equipment layouts, piping arrangements, and fabrication drawings using industry-standard software such as Auto CAD Plant 3D, Smart Plant 3D (SP3D), Revit, Navisworks, and Auto CAD.<br><br>The ideal candidate should possess hands-on experience in multidisciplinary coordination and detailed engineering for water treatment projects executed for municipal, industrial, oil & gas, or EPC clients.<br><br>Responsibilities<br><br>3D Modeling & Design <br><br>Develop and maintain detailed 3D models for water treatment and process packages. Create equipment layouts, piping models, structural models, piping supports, and utility routing. Perform 3D modeling using:Autodesk Plant 3DSmart Plant 3D (SP3D) Autodesk Revit Navisworks Auto CADPrepare General Arrangement (GA) drawings, plot plans, and equipment layouts. Generate piping isometrics, orthographic drawings, and spool drawings from 3D models.<br>Engineering Coordination<br><br>Coordinate with Process, Mechanical, Civil, Structural, Electrical, and Instrumentation disciplines. Participate in model reviews and clash detection sessions. Resolve interdisciplinary design conflicts and constructability issues. Ensure compliance with project specifications, client requirements, and international standards.<br><br>Drawing & Documentation<br><br>Produce fabrication and construction drawings. Generate BOMs (Bill of Materials) and MTOs (Material Take-Offs). Maintain drawing registers and revision control. Support engineering deliverables throughout project execution.<br><br>Requirements<br><br>Diploma or Bachelor's Degree in Mechanical Engineering, Drafting Technology, Plant Design, or related discipline. Minimum 5-8 years of experience in 3D plant design. At least 3 years of experience in Water Treatment / Wastewater Treatment / Desalination projects. Experience working in EPC, package manufacturing, or process engineering environments. Software Skill: Autodesk Plant 3DSmart Plant 3D (SP3D) Autodesk Revit Auto CAD 2D & 3DNavisworks<br><br>Gradiant is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, gender, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Quality Manager - Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Quality Manager </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Quality Manager is responsible for developing, implementing, and managing the Project Quality Management System (PQMS) for ADNOC Offshore projects. The role ensures that all engineering, procurement, fabrication, construction, installation, commissioning, and handover activities comply with ADNOC requirements, project specifications, contractual obligations, international standards, and regulatory requirements.</p><br><br><p>The Quality Manager provides leadership to project QA/QC teams, contractors, suppliers, and inspection agencies to ensure delivery of a safe, reliable, and high-quality offshore facility.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Quality Management Leadership</b></p><br><br><ul><li>Develop and implement the Project Quality Management Plan (PQMP) in alignment with ADNOC standards and project requirements.</li><li>Establish project quality objectives, KPIs, procedures, and quality assurance frameworks.</li><li>Lead and manage all QA/QC activities throughout the project lifecycle.</li><li>Ensure quality requirements are effectively integrated into engineering, procurement, construction, installation, and commissioning activities.</li><li>Promote a culture of quality excellence and continuous improvement across project teams.</li></ul><p><b>Quality Assurance (QA)</b></p><br><br><ul><li>Develop, review, and approve Quality Plans, Inspection and Test Plans (ITPs), Quality Procedures, and Method Statements.</li><li>Ensure compliance with ADNOC specifications, international standards, and contractual quality requirements.</li><li>Monitor contractor and supplier Quality Management Systems.</li><li>Conduct project quality audits and assessments.</li><li>Verify implementation of lessons learned and best practices.</li></ul><p><b>Quality Control (QC)</b></p><br><br><ul><li>Oversee inspection and testing activities during:<ul><li>Engineering</li><li>Procurement</li><li>Fabrication</li><li>Construction</li><li>Offshore Installation</li><li>Pre-commissioning</li><li>Commissioning</li></ul></li><li>Ensure all inspection and test records are properly maintained and documented.</li><li>Review Non-Conformance Reports (NCRs), corrective actions, and preventive actions.</li><li>Verify effective close-out of quality issues.</li></ul><p><b>Vendor &amp; Supplier Quality Management</b></p><br><br><ul><li>Manage supplier quality surveillance and inspection activities.</li><li>Review and approve vendor quality documents and manufacturing quality plans.</li><li>Conduct supplier audits and qualification assessments.</li><li>Monitor vendor performance and quality compliance.</li><li>Coordinate third-party inspection agencies and expediting teams.</li></ul><p><b>Construction &amp; Offshore Quality Management</b></p><br><br><ul><li>Monitor fabrication yards, module assembly facilities, and offshore installation activities.</li><li>Ensure welding, NDT, coating, mechanical completion, and testing activities comply with approved procedures.</li><li>Verify construction quality records and turnover dossiers.</li><li>Support offshore hook-up, tie-in, and commissioning activities.</li></ul><p><b>Quality Audits &amp; Compliance</b></p><br><br><ul><li>Develop and execute audit schedules for contractors, subcontractors, and suppliers.</li><li>Lead internal and external quality audits.</li><li>Coordinate ADNOC quality audits and technical assessments.</li><li>Monitor compliance with ISO 9001 and ADNOC quality management requirements.</li><li>Ensure readiness for project quality reviews and regulatory inspections.</li></ul><p><b>NCR &amp; Continuous Improvement</b></p><br><br><ul><li>Lead investigations into quality incidents and major NCRs.</li><li>Perform root cause analysis and track corrective actions.</li><li>Monitor quality trends and identify improvement opportunities.</li><li>Implement continuous improvement initiatives to enhance project quality performance.</li></ul><p><b>Project Handover &amp; Documentation</b></p><br><br><ul><li>Ensure completion and verification of quality dossiers and turnover packages.</li><li>Verify mechanical completion and commissioning documentation.</li><li>Support final project handover and close-out activities.</li><li>Ensure document retention and records management requirements are met.</li></ul><p><b>Team &amp; Stakeholder Management</b></p><br><br><ul><li>Lead QA/QC Engineers, Inspectors, Coordinators, and Quality Specialists.</li><li>Coordinate with Engineering, Procurement, Construction, Operations, HSE, and Project Controls teams.</li><li>Interface with ADNOC representatives, EPC contractors, vendors, classification societies, and third-party inspectors.</li><li>Provide quality performance reports to project management and senior leadership.</li></ul><br><p><b>Minimum Qualifications</b></p><br><br><ul><li>Bachelor's Degree in Engineering (Mechanical, Civil, Electrical, Industrial, Metallurgy, or related discipline).</li><li>Master's Degree is an advantage.</li></ul><br><p><b>Preferred Certifications</b></p><br><br><ul><li>ISO 9001 Lead Auditor Certification</li><li>ASQ Certified Quality Manager (CQM)</li><li>ASQ Certified Quality Engineer (CQE)</li><li>IRCA Certified Lead Auditor</li><li>NACE Coating Inspector (preferred)</li><li>CSWIP Welding Inspector Certification (preferred)</li><li>API Certifications (desirable)</li></ul><br><p><b>Experience Requirements</b></p><br><br><ul><li>Minimum <b>15 years</b> of QA/QC experience in the Oil &amp; Gas, Offshore, EPC, or Energy industry.</li><li>At least <b>7 years</b> in a Quality Manager or Senior QA/QC Management role.</li><li>Strong experience in offshore oil and gas projects.</li><li>Proven track record supporting FEED, EPC, fabrication, offshore installation, and commissioning phases.</li><li>ADNOC Offshore or major Middle East operator project experience preferred.</li></ul><br><p><b>Technical Competencies</b></p><br><br><p><b>Quality Management</b></p><br><br><ul><li>Quality Management Systems (QMS)</li><li>Quality Assurance &amp; Quality Control</li><li>Inspection &amp; Test Plans (ITPs)</li><li>Audit Management</li><li>NCR Management</li><li>Root Cause Analysis</li><li>Continuous Improvement Programs</li></ul><p><b>Fabrication &amp; Construction Quality</b></p><br><br><ul><li>Welding Inspection</li><li>NDT Techniques</li><li>Coating &amp; Painting Inspection</li><li>Mechanical Inspection</li><li>Structural Steel Inspection</li><li>Piping Inspection</li><li>Electrical &amp; Instrumentation Inspection</li></ul><p><b>Offshore Project Quality</b></p><br><br><ul><li>Offshore Fabrication Yards</li><li>Jackets &amp; Topsides</li><li>Pipelines &amp; Subsea Equipment</li><li>Offshore Installation Activities</li><li>Hook-up &amp; Commissioning</li><li>Mechanical Completion Processes</li></ul><p><b>Codes &amp; Standards</b></p><br><br><ul><li>ADNOC Engineering Standards</li><li>ADNOC Quality Requirements</li><li>ISO 9001 Quality Management Systems</li><li>API Standards</li><li>ASME Codes</li><li>ASTM Standards</li><li>AWS Welding Standards</li><li>ISO 45001 &amp; ISO 14001 Awareness</li><li>DNV Offshore Standards</li></ul><p><b>Systems &amp; Software</b></p><br><br><ul><li>SAP</li><li>Aconex</li><li>SharePoint</li><li>Power BI</li><li>MS Office Suite</li><li>Quality Management Systems (QMS)</li><li>Electronic Document Management Systems (EDMS)</li></ul><br><p><b>Behavioral Competencies</b></p><br><br><ul><li>Strong leadership and people management skills.</li><li>Excellent communication and stakeholder engagement abilities.</li><li>High attention to detail and quality focus.</li><li>Strong analytical and problem-solving skills.</li><li>Effective decision-making capability.</li><li>Ability to influence contractors and project teams.</li><li>Commitment to operational excellence and continuous improvement.</li></ul><br><br><br><br> </div>

Job Type: Full-time, Permanent Compensation: AED 4,000 – 6,000 per month (Fixed) + High-Incentive Monthly Performance Bonus (Sales & CSAT Targets)<br>About the Role:HPG Auto Repair is seeking an energetic, customer-focused, and commercially minded Automotive Service Advisor to join our growing team in Dubai. As the primary liaison between our clients and the technical workshop staff, you will go beyond daily service intake—playing a active role in building customized vehicle maintenance packages, converting diagnostic reports into transparent repair orders, and driving revenue through package sales. If you have proven multi-brand garage experience in the UAE, strong sales drive and know how to structure and pitch valuable vehicle care plans, we want to hear from you.<br>Key Responsibilities:Service Package Creation & Sales: Design tailored car maintenance contracts and service packages (Minor/Major service bundles, preventive care plans), coordinate with management for approval, and proactively sell them to existing and prospective clients. Customer Relations & Intake: Act as the first point of contact—welcoming clients, actively listening to vehicle symptoms, registering job cards, and scheduling workshop flow. Estimation & Supplier Coordination: Source parts availability/pricing to draft accurate, transparent repair estimates and long-term service agreements for management approval. Workshop & Technical Liaison: Work hand-in-hand with the Floor In-Charge and technicians to monitor repair progress, ensure accurate diagnostics, and enforce strict on-time vehicle delivery. Customer Communication & Upselling: Educate owners on vehicle health, explain diagnostic findings, and upsell necessary mechanical repairs and preventive maintenance packages ethically. Logistics & Retention: Oversee vehicle drop-offs, testing, and deliveries while cultivating long-term customer relationships to maximize repeat visits and referrals.<br>Requirements & Qualifications:Experience: Minimum 3+ years as a Service Advisor in a multi-brand auto repair garage within the UAE market. Package Design & Sales: Demonstrated track record in drafting, structuring, and successfully pitching car maintenance service packages and repair contracts. Technical & Sales Aptitude: Excellent understanding of multi-brand mechanical/electrical repair scopes, paired with strong negotiation, communication, and closing skills. Education: Bachelor’s Degree or Diploma in Automobile / Mechanical Engineering (Preferred). Licensing: Valid UAE Driver’s License is highly preferred.<br>What We Offer:Competitive Pay: AED 4,000 – 6,000 base salary + attractive sales & customer satisfaction performance incentives. Employment Security: Full UAE Labor Law benefits (Visa, Medical, Paid Leave). Growth: A stable, high-volume environment with opportunities for professional growth in a structured multi-brand repair setting.<br>How to Apply:Interested candidates who meet the UAE multi-brand experience requirements are invited to submit their updated CV highlighting their experience in service package sales and multi-brand service advisor roles.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;</p> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an A/C Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as:<br><br>• Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc.<br>• Maintain preventively all air-conditioning and refrigeration systems within the hotel<br>• Check on performance of refrigeration systems and components<br>• Verify all door closing systems on walk in coolers / freezer (door gaskets / latches)<br>• Check and maintain all defrosting systems and automation of ice makers<br>• Work on maintenance requests from all departments<br>• Ensure routine cleaning of fan coil units and air-handling unit filters<br>• Check on performance of air-conditioning and chill water systems<br>• Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up<br>• Strict control on venting of CFC’s to atmosphere<br>• Overhauling of air-condition / refrigeration equipment and systems<br>• Check all refrigeration and oil levels and control of major repairs<br>• Cooperate and inform Engineering Storekeeper on purchase of parts<br>• Carry out all works as per the country technical regulations and safety standards</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Juman Energy Group.<br> For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.</p><br><br>Job Description<br><p><strong>1. Structural Discipline Technical Authority (Owner’s Engineer)</strong></p><br><p>Serve as the primary authority for all structural engineering activities related to IA/PA upgrades, ensuring adherence to:</p><br><ul><li>ADNOC Structural Engineering Standards.</li><li>ISO, API RP2A, AISC, BS, and offshore structural codes.</li><li>ADNOC offshore brownfield requirements.</li><li>Project Basis of Design and FEED integrity.</li><li>Structural integrity and safety requirements for all package equipment Provide clear oversight and final approval on structural discipline matters.</li></ul><p><strong>2. Structural Review of Package Equipment Integration</strong></p><br><p>Lead structural engineering governance for integrating:</p><br><ul><li>Instrument Air Compressors.</li><li>Plant Air Compressors.</li><li>Twin Tower Dryers.</li><li>IA/PA Air Receivers.</li><li>Associated skid structures and platforms.</li><li>Lifting frames, base frames, and support steel.</li></ul><p>Responsibilities:</p><br><ul><li>Verify skid loading, static &amp; dynamic reactions.</li><li>Check structural adequacy of supporting platforms.</li><li>Validate vendor structural information (CG, weights, loads).</li><li>Review equipment baseplates, foundation pad/skid supports.</li><li>Ensure offshore environmental load conditions are considered.</li><li>Approve structural reinforcement requirements.</li></ul><p><strong>3. Brownfield Structural Assessment &amp; Tie-In Engineering</strong></p><br><p>Brownfield engineering is critical for ADNOC platforms. Lead structural tasks include:</p><br><p>Assessing existing deck load capacity</p><br><ul><li>Reviewing as-built drawings, laser scans, &amp; survey data.</li><li>Identifying reinforcement needs for increased loads.</li><li>Checking space constraints &amp; structural conflicts.</li><li>Ensuring safe access &amp; maintenance clearance.</li><li>Reviewing EPC brownfield method statements.</li><li>Verifying tie-in locations for new supports and routing.</li><li>Confirming deck rating suitability for compressors/dryers Support safe brownfield execution under SIMOPS and offshore constraints.</li></ul><p><strong>4. Structural Analysis Review &amp; Verification</strong></p><br><p>Review EPC contractor structural analyses:</p><br><ul><li>Global &amp; local FEA (Finite Element Analysis).</li><li>Deck load &amp; punching shear checks.</li><li>Fatigue analysis (if applicable).</li><li>Vibration assessments for rotating equipment.</li><li>Impact load/accidental load checks.</li><li>Dynamic load &amp; equipment vibration transmission.</li><li>Wind, wave &amp; seismic load evaluation for offshore Ensure all structural calculations meet ADNOC safety factors and design criteria.</li></ul><p><strong>5. 3D Model Review &amp; Multidiscipline Integration </strong></p><br><p>Lead 3D model structural validation for:</p><br><ul><li>Equipment placement &amp; support framing.</li><li>Clearances, access, and maintenance envelopes.</li><li>Structural element clashes with piping/E&amp;I/trays.</li><li>Cable tray and piping penetrations.</li><li>Location and routing of additional supports.</li><li>Structural stability &amp; stiffness checks Participate in 30% / 60% / 90% EPC model review sessions.</li></ul><p><strong>6. Lifting, Rigging &amp; Installation Engineering </strong></p><br><p>Provide structural OE oversight for installation engineering:</p><br><ul><li>Review lifting plans &amp; rigging studies.</li><li>Validate crane capacity, rigging points, padeyes.</li><li>Review temporary lifting frames or lifting lugs.</li><li>Ensure compliance with offshore lifting standards.</li><li>Verify transport &amp; installation load conditions Support safe mechanical installation offshore.</li></ul><p><strong>7. Structural Safety &amp; Process Integrity Support </strong></p><br><p>Provide structural input for:</p><br><ul><li>HAZID.</li><li>HAZOP (structural interface actions).</li><li>SIMOPS reviews.</li><li>ENVID.</li><li>Fire Protection &amp; Blast Loading (if applicable).</li><li>Ensure structural integrity is maintained during all phases of EPC.</li></ul><p><strong>8. Review of EPC Structural Deliverables </strong></p><br><p>Review and approve:</p><br><ul><li>Structural drawings (GAs, details, reinforcements).</li><li>Fabrication drawings.</li><li>Welding maps, WPS/PQR/NDE requirements.</li><li>Structural MTOs.</li><li>Tie-in support drawings.</li><li>Offshore installation plans.</li><li>Structural demolition &amp; modification drawings Ensure alignment with ADNOC formats and numbering.</li></ul><p><strong>9. QA/QC &amp; Fabrication Oversight </strong></p><br><p>Provide OE-level assurance during structural fabrication:</p><br><ul><li>Review EPC QCP/ITP for structural fabrication.</li><li>Validate material traceability and weld quality.</li><li>Review NDT plans (UT, RT, MT, PT).</li><li>Monitor fabrication progress (if required).</li><li>Approve structural works before delivery offshore.</li></ul><p><strong>10. Construction &amp; Commissioning Support (Structural Discipline)</strong></p><br><p>During field execution, support:</p><br><ul><li>Structural element installation guidance.</li><li>Field modifications and clash resolution.</li><li>Punch-list preparation and closure.</li><li>Verification of structural stability after installation.</li><li>As-built validation &amp; final acceptance.</li></ul><p><strong>11. Documentation, Reporting &amp; Compliance </strong></p><br><ul><li>Maintain structural discipline registers (load sheets, analyses, GA tracking).</li><li>Review weekly EPC progress and structural updates.</li><li>Track TQs, deviations, NCRs &amp; change requests.</li><li>Ensure full compliance with ADNOC document control requirements.</li><li>Verify final as-built structural documentation.</li></ul><br>Qualifications<br><ul><li>Minimum Experience: 16 + Years of experience in Oil &amp; Gas industry.</li><li>Master’s / Bachelor’s degree in Civil / Structural engineering or equivalent qualification.</li><li>Exposure to Offshore Platforms Projects as part of the experience is preferred.</li><li>Familiarity with ADNOC Standards &amp; Procedures will be an added advantage.</li><li>Proficient in AVEVA (E3D/PDMS) and SP3D for structural modelling, steel framing and platform design, clash detection, and extraction of structural GA drawings, fabrication details, IFC and MTO deliverables in accordance with ADNOC design standards.</li><li>Experienced with SACS, STAAD. Ro, Tekla Structures, AutoCAD, Navisworks, AVEVA E3D and SP3D for offshore structural analysis, 3D modelling, detailing, and preparation of IFC/MTO deliverables as required for ADNOC projects.</li></ul><br>Additional Information<br><p><strong>Personal Attributes:</strong></p><br><ul><li>Strong leadership, ownership and decision-making capability in high-pressure site and offshore environments.</li><li>Excellent multidisciplinary coordination, communication, reporting and stakeholder-management skills.</li><li>Systematic approach to safety, quality, documentation, troubleshooting and closeout.</li><li>Ability to work across engineering, construction, commissioning and operations teams and manage multiple vendors simultaneously.</li><li>Willingness and medical fitness to travel and work offshore as required.</li></ul><br><br> </div>