Electronics Engineer Jobs in UAE

Job Description<br><br>Job Overview:<br><br>The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project Work collaboration within the Project team and with the Client to maintain positive relationships Required to support the commissioning team with performing any of the following activities as a minimum Operate and maintain Manuals development Commissioning and Start-up Spares development First Fills and Consumables development Commissioning, and Start-Up Procedures Discipline Equipment system checks and tests Function testing of mechanical, electrical, and instrument systems Participate in Commissioning, Start-Up and Performance Testing Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests Supervise craft personnel required for site pre-commissioning and commissioning activities Coordinate activities with other engineers in the commissioning team<br><br>Reports to:<br><br>Project: Project Commissioning Manager<br><br>Functional: Function Commissioning Manager<br><br>Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team<br><br>Supervises: Commissioning Engineers, Completions Specialists, Operation & Maintenance specialists, Designers, and support<br><br>personnel within the function group <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor’s degree or equivalent in Engineering8-15 years of experience in oil and gas with a major contractor or consultant Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance Applies understanding of the industry to improve effectiveness Preferably possess a degree or diploma or equivalent in engineering Have a minimum of 5 years of experience in a chemical, refinery, or oil & gas processing facility Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry Able to effectively communicate technical solutions and concepts to other engineers and non-engineers Must have good computer software skills in MS Word, Excel, Power Point, and Visio Must have good organizational skills and be adaptable to the needs of various discipline groups Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner Willing and able to travel to construction sites on assignments to international sites Proficiency in English, Multi-Language skills a plus<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project Work collaboration within the Project team and with the Client to maintain positive relationships Required to support the commissioning team with performing any of the following activities as a minimum Operate and maintain Manuals development Commissioning and Start-up Spares development First Fills and Consumables development Commissioning, and Start-Up Procedures Discipline Equipment system checks and tests Function testing of mechanical, electrical, and instrument systems Participate in Commissioning, Start-Up and Performance Testing Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests Supervise craft personnel required for site pre-commissioning and commissioning activities Coordinate activities with other engineers in the commissioning team<br><br>Reports to:<br><br>Project: Project Commissioning Manager<br><br>Functional: Function Commissioning Manager<br><br>Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team<br><br>Supervises: Commissioning Engineers, Completions Specialists, Operation & Maintenance specialists, Designers, and support<br><br>personnel within the function group <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor’s degree or equivalent in Engineering8-15 years of experience in oil and gas with a major contractor or consultant Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance Applies understanding of the industry to improve effectiveness Preferably possess a degree or diploma or equivalent in engineering Have a minimum of 5 years of experience in a chemical, refinery, or oil & gas processing facility Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry Able to effectively communicate technical solutions and concepts to other engineers and non-engineers Must have good computer software skills in MS Word, Excel, Power Point, and Visio Must have good organizational skills and be adaptable to the needs of various discipline groups Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner Willing and able to travel to construction sites on assignments to international sites Proficiency in English, Multi-Language skills a plus<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project Work collaboration within the Project team and with the Client to maintain positive relationships Required to support the commissioning team with performing any of the following activities as minimum Operate and maintain Manuals development Commissioning and Start-up Spares development First Fills and Consumables development Commissioning, and Start-Up Procedures Discipline Equipment system checks and tests Function testing of mechanical, electrical, and instrument systems Participate in Commissioning, Start-Up and Performance Testing Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests Supervise craft personnel required for site pre-commissioning and commissioning activities Coordinate activities with other engineers in the commissioning team<br><br>Reports to:<br><br>Project: Project Commissioning Manager<br><br>Functional: Function Commissioning Manager<br><br>Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team<br><br>Supervises: Commissioning Engineers, Completions Specialists, Operation & Maintenance specialists, Designers, and support<br><br>personnel within the function group <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor’s degree or equivalent in Engineering8-15 years of experience in oil and gas with a major contractor or consultant Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance Applies understanding of the industry to improve effectiveness Preferably possess a degree or diploma or equivalent in engineering Have a minimum of 5 years of experience in a chemical, refinery, or oil & gas processing facility Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry Able to effectively communicate technical solutions and concepts to other engineers and non-engineers Must have good computer software skills in MS Word, Excel, Power Point, and Visio Must have good organizational skills and be adaptable to the needs of various discipline groups Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner Willing and able to travel to construction sites on assignments to international sites Proficiency in English, Multi-Language skills a plus<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Engineer - Construction - Mechanical - Fabrication Yard – Offshore PMC project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u><span>Specialist Engineer - Construction - Mechanical - Fabrication Yard – Offshore PMC project</span></u></b></p><br><br><br><p><b>KBR Abu Dhabi is currently seeking to hire Specialist Engineer - Construction - Mechanical - Fabrication Yard for an Offshore PMC project to be based in Fabrication Yard Office role in Abu Dhabi or Dubai Office.</b></p><br><br><br><p><b>The team is looking for someone who has min 15 years of experience in Construction - Mechanical within oil &amp; gas industries.</b></p><br><br><br><p><b><u>Job Responsibilities: </u></b></p><br><br><br><p><b>Profile matching below criteria only will be contacted</b></p><br><br><br><ul><li><b>Engineering degree in any discipline is a must.</b></li><li><b>Minimum 15 years of proven experience in Construction - Mechanical within oil &amp; gas industries.</b></li><li><b>Oversee and supervise fabrication yard activities, ensuring compliance with project specifications, drawings, and quality standards.</b></li><li><b>Ensure adherence to HSE requirements and promote a strong safety culture within the fabrication yard.</b></li><li><b>Monitor fabrication progress and ensure alignment with project schedules and milestones</b></li><li><b>Support project execution by ensuring timely completion of fabrication, assembly, and pre-commissioning activities</b>.</li></ul><br><br><br> </div>

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

UI Engineer (React)<br>We're looking for a talented UI Engineer (React) to join a high-performing engineering team building modern, scalable web applications. This is an excellent opportunity for a frontend-focused engineer who enjoys creating intuitive user experiences while collaborating closely with backend engineers, product teams, and designers to deliver high-quality digital products.<br>What You'll DoDesign, develop, and maintain responsive, high-performance web applications using React.js. Build reusable, scalable UI components using modern frontend technologies and best practices. Integrate frontend applications with RESTful APIs and manage asynchronous data flows. Implement responsive, mobile-first designs with a strong focus on accessibility and usability. Work closely with UX/UI designers to deliver polished user experiences. Manage application state using Redux Toolkit, Zustand, or Context API. Participate in code reviews, sprint planning, and Agile ceremonies. Collaborate with backend engineers to integrate APIs and troubleshoot application issues. Contribute to frontend architecture, coding standards, and continuous improvement initiatives.<br>What We're Looking For4+ years of commercial experience developing applications with React.js. Strong proficiency in Java Script (ES6+) and Type Script. Experience with modern UI frameworks such as Tailwind CSS, Material UI, or shadcn/ui. Strong understanding of responsive design principles using Flexbox, CSS Grid, and mobile-first development. Solid knowledge of HTML5, CSS3, semantic markup, and WCAG 2.1 accessibility standards. Experience integrating REST APIs and handling asynchronous data. Hands-on experience with state management using Redux Toolkit, Zustand, or Context API. Familiarity with Git, code reviews, and Agile/Scrum development methodologies.<br>Nice to Have Experience with Next.js. Exposure to Node.js (Express or Nest JS) or Python (Fast API or Flask) for backend API development. Basic knowledge of Postgre SQL or Mongo DB. Understanding of authentication and authorization using JWT and OAuth2. Experience with data visualization libraries such as Chart.js, Recharts, or D3.js. Exposure to LLMs, Retrieval-Augmented Generation (RAG), or AI-powered applications. Experience working with Azure or AWS cloud environments. Familiarity with Docker, CI/CD pipelines, and modern Dev Ops practices.<br>Please apply to be contacted with further information.

UI Engineer (React)<br>We're looking for a talented UI Engineer (React) to join a high-performing engineering team building modern, scalable web applications. This is an excellent opportunity for a frontend-focused engineer who enjoys creating intuitive user experiences while collaborating closely with backend engineers, product teams, and designers to deliver high-quality digital products.<br>What You'll DoDesign, develop, and maintain responsive, high-performance web applications using React.js. Build reusable, scalable UI components using modern frontend technologies and best practices. Integrate frontend applications with RESTful APIs and manage asynchronous data flows. Implement responsive, mobile-first designs with a strong focus on accessibility and usability. Work closely with UX/UI designers to deliver polished user experiences. Manage application state using Redux Toolkit, Zustand, or Context API. Participate in code reviews, sprint planning, and Agile ceremonies. Collaborate with backend engineers to integrate APIs and troubleshoot application issues. Contribute to frontend architecture, coding standards, and continuous improvement initiatives.<br>What We're Looking For4+ years of commercial experience developing applications with React.js. Strong proficiency in Java Script (ES6+) and Type Script. Experience with modern UI frameworks such as Tailwind CSS, Material UI, or shadcn/ui. Strong understanding of responsive design principles using Flexbox, CSS Grid, and mobile-first development. Solid knowledge of HTML5, CSS3, semantic markup, and WCAG 2.1 accessibility standards. Experience integrating REST APIs and handling asynchronous data. Hands-on experience with state management using Redux Toolkit, Zustand, or Context API. Familiarity with Git, code reviews, and Agile/Scrum development methodologies.<br>Nice to Have Experience with Next.js. Exposure to Node.js (Express or Nest JS) or Python (Fast API or Flask) for backend API development. Basic knowledge of Postgre SQL or Mongo DB. Understanding of authentication and authorization using JWT and OAuth2. Experience with data visualization libraries such as Chart.js, Recharts, or D3.js. Exposure to LLMs, Retrieval-Augmented Generation (RAG), or AI-powered applications. Experience working with Azure or AWS cloud environments. Familiarity with Docker, CI/CD pipelines, and modern Dev Ops practices.<br>Please apply to be contacted with further information.

<ul><li>Design and develop electrical systems and components, ensuring they meet safety and performance standards.</li><li>Conduct feasibility studies and cost analysis to optimize project efficiency and budget adherence.</li><li>Collaborate with cross-functional teams to integrate electrical designs with mechanical and software systems.</li><li>Perform rigorous testing and troubleshooting of electrical systems to identify and resolve issues promptly.</li><li>Prepare detailed technical documentation, including schematics, specifications, and reports for compliance and reference.</li><li>Oversee installation and commissioning of electrical systems, ensuring adherence to engineering codes and regulations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical Engineering or a related field, with a strong foundation in circuit theory and electromagnetics.</li><li>Professional Engineer (PE) license or relevant certifications, demonstrating a commitment to industry standards and ethics.</li><li>Minimum of 3 years of hands-on experience in electrical design, preferably in sectors such as renewable energy or automation.</li><li>Proven track record of working on complex projects, showcasing strong analytical and problem-solving capabilities.</li><li>Familiarity with CAD software and simulation tools, enabling effective design and analysis of electrical systems.</li><li>Fluency in English, with additional language skills being a plus for international collaboration.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Project Engineer (Civil)</strong></p><p>Location: Abu Dhabi, UAE</p><br><p>We are seeking an experienced Project Engineer (Civil) to join our team in Abu Dhabi. The successful candidate will be responsible for overseeing day-to-day construction activities, coordinating with clients, consultants, subcontractors, and suppliers, ensuring work is executed in accordance with approved drawings, specifications, and quality standards, monitoring project progress, preparing site reports, assisting with project planning and resource management, resolving technical and site-related issues, and ensuring full compliance with health, safety, and environmental requirements.</p><br><p><strong>Please apply only if the offered salary and immediate joining requirement meet your expectations. Only shortlisted candidates will be contacted.</strong></p><br><p><strong>Salary &amp; Benefits</strong><br><strong>Salary: Up to AED 10,000 per month (depending on qualifications and experience).</strong><br><strong>Company transportation provided.</strong></p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Civil Engineering. </p><p>Minimum 5–7 years of relevant UAE construction experience. </p><p>Strong knowledge of site supervision, project coordination, and construction execution. </p><p>Excellent communication and organizational skills. </p><p>Proficiency in AutoCAD and Microsoft Office. </p><p>UAE Driving License is a must. </p><p><strong>Available for immediate joining. </strong></p><p><strong>Available to attend an interview this week.</strong></p><p></p></section>

We are hiring an experienced Planning Engineer to manage, track, and optimize project schedules across fast-track commercial, retail, and luxury fit-out projects in Dubai. You will ensure seamless execution between design, procurement, joinery fabrication, and site installation.<br>Key Responsibilities- Develop and maintain Master Baseline Schedules in Primavera P6 / MS Project.- Sequence submittals, long-lead procurement, joinery production, and site fit-out activities.- Generate weekly progress updates, 2/4-week look-aheads, S-Curves, and manpower histograms.- Identify bottlenecks early, propose schedule recovery plans, and support EOT/delay impact analyses.- Coordinate milestone targets with Project Managers, subcontractors, and developer/landlord teams.<br>Key Requirements Education: Bachelor’s in Civil Engineering, Architecture, or Construction Management.<br>Experience: 4–7+ years as a Planning Engineer in Dubai, with direct experience in interior fit-out and joinery.<br>Technical Skills: Advanced Primavera P6 and Excel. Strong knowledge of Dubai fit-out processes, trade sequencing, and authority/landlord approvals.

Halian is hiring an IT Service Desk Engineer in Abu Dhabi.<br>Greetings!<br>Experience required: 5+ Years Duration: 1 year & extendable<br>Technical Skills:5+ years of experience as an IT Service Desk Engineer. Strong Service Desk L2 support experience. Microsoft 365 (O365/M365) administration and support. Azure Active Directory (Entra ID) administration. Microsoft SCCM (Configuration Manager) Microsoft Intune (Endpoint Management) Service Now ticketing system experience (highly preferred) ITSM processes and service delivery experience. Basic network configuration and troubleshooting. LAN/WAN connectivity support. Internet connectivity troubleshooting and ISP coordination.<br><br>Halian Group: With over 28 years of experience, we have come to understand that innovation is the only way to provide agile, practical solutions that transform businesses and careers. Our resourcing and smart services help you to realize tomorrow's potential. Discover the amazing things possible when you bring the right people and the right technologies together.

Electrical Engineer Industry: Oil & Gas (Onshore) Location:Abudhabi Experience: 8+ Years<br><br>Job Description:We are seeking an experienced Lead Electrical Engineer with strong expertisein power system studies using ETAP software and proven experience in 132k VGIS (Gas-Insulated Switchgear) substations<br>.<br>Key Responsibilities: Extensive hands-on experience with ETAP software and power systemstudies. Proven experience in 132k V GIS substations, including design,engineering, testing, and commissioning. Strong understanding of:o Protection Relays and Coordinationo Power Transformerso HV Switchgearo ECMS, SCMS and Automation Systemso Grid Interconnection Requirements Experience with utility, EPC, or consulting engineering projects. Familiarity with major OEM equipment such as Siemens, Hitachi Energy,GE Grid Solutions, Schneider Electric, or ABB is desirabl<br>e.<br>Key Skills & Requirements:Technical Skills ETAP (Advanced User) Auto CAD Microsoft Office Suite Protection Study Software (advantage) Knowledge of IEC 61850 communication protocols Electrical design and calculation softw<br>are

Company Description K5 Engineering Consultancy, established in 2017, delivers high-quality engineering design and supervision services with a focus on technical excellence and practical execution. Specializing in architectural, structural designs, <br>Role Description This is a full-time on-site role for a Project Engineer located in Ajman. The Civil Project Engineer will be in project execution, oversee engineering designs, and ensure compliance with safety and quality standards. Responsibilities include coordinating with team members and clients, managing project schedules, and resolving technical challenges to deliver successful project outcomes.<br>Qualifications Bachelor’s degree in Architecture, Civil Engineering, or related field (Postgraduate qualifications are an advantage). Minimum 5 years of UAE experience in the consultancy sector. Proven expertise in project supervision, office management, and team leadership. Strong portfolio in mixed-use projects. Proficiency in Auto CAD (5+ years); Revit/BIM knowledge is a plus. Excellent organizational, leadership, and communication skills. Valid UAE Driving License (required);SOE membership preferred.

We're Hiring: Structural Engineer<br>Join our growing engineering team as a Structural Engineer. We're looking for a highly motivated professional with strong structural design experience, a practical engineering mindset, and a passion for delivering safe, innovative, and fit-for-purpose solutions in demanding industrial environments. <br>To apply, please send your CV to hr@crewshield.com

<p>We are seeking a dedicated Quality Control Engineer to join our dynamic team in Dubai. In this role, you will ensure that all construction projects meet the highest quality standards, comply with regulations, and fulfill client expectations. You will play a pivotal role in maintaining excellence from project inception to completion. Responsibilities: - Develop, implement, and monitor quality control procedures and standards for construction projects. - Conduct regular inspections and audits to ensure compliance with quality and safety standards. - Collaborate with project managers, contractors, and suppliers to address quality issues and implement corrective actions. - Review project specifications and documents to ensure quality requirements are clearly understood and met. - Prepare detailed reports on quality assessments and non-conformance issues. - Train and supervise quality control technicians and other team members. - Stay updated with industry trends, regulations, and best practices related to construction quality control.</p><p>- Bachelor’s degree in Civil Engineering, Construction Management, or related field. - Proven 3 yrs Min experience as a Quality Control Engineer in the construction industry, preferably in UAE or GCC region. - Strong knowledge of construction processes, materials, and quality standards. - Familiarity with relevant codes, regulations, and ISO standards. - Excellent analytical, problem-solving, and communication skills. - Ability to work effectively in a fast-paced, multicultural environment. - Attention to detail and commitment to maintaining high-quality standards. - Proficient in using quality control tools and software. - Fluency in English; knowledge of Arabic is a plus.</p>

<p>Here's a refined Required Skills & Qualifications section for a QA/QC Engineer – Metal Fabrication & Cladding (UAE): Required Skills & Qualifications • Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related discipline. • Minimum of 3–5 years of QA/QC experience in metal fabrication and cladding projects within the UAE. • Strong experience in preparing, submitting, and following up on Material Inspection Requests (MIRs) and Work Inspection Requests (WIRs).</p><p>• Proven ability to conduct quality inspections throughout fabrication and installation activities. • Experience in identifying non-conformities, raising Non-Conformance Reports (NCRs), and ensuring timely implementation and close-out of corrective actions. • Thorough understanding of quality control procedures, inspection and test plans (ITPs), and project quality documentation. • Ability to interpret engineering drawings, specifications, and approved method statements.</p>

<p>We are seeking a qualified Mechanical Engineer with proven experience in HVAC, Plumbing, and Fire Alarm systems to join our team. The ideal candidate will be responsible for the design review, execution, coordination, supervision, testing, and commissioning of mechanical building services while ensuring compliance with project specifications, local authority regulations, and quality standards.</p><p>• Bachelor's Degree in Mechanical Engineering. • Minimum minimum 4+ years of UAE/GCC experience in building construction or MEP projects. • Mandatory hands-on experience in: • HVAC Systems • Plumbing Systems • Fire Alarm Systems • Strong knowledge of local authority regulations and international engineering standards in the UAE • Experience reviewing shop drawings and coordinating with multidisciplinary teams. • Knowledge of project scheduling and reporting is an advantage. • Valid UAE Driving License is preferred.</p>

<p>We are seeking a qualified Mechanical Engineer with proven experience in HVAC, Plumbing, and Fire Alarm systems to join our team. The ideal candidate will be responsible for the design review, execution, coordination, supervision, testing, and commissioning of mechanical building services while ensuring compliance with project specifications, local authority regulations, and quality standards.</p><p>• Bachelor's Degree in Mechanical Engineering. • Minimum minimum 4+ years of UAE/GCC experience in building construction or MEP projects. • Mandatory hands-on experience in: • HVAC Systems • Plumbing Systems • Fire Alarm Systems • Strong knowledge of local authority regulations and international engineering standards in the UAE • Experience reviewing shop drawings and coordinating with multidisciplinary teams. • Knowledge of project scheduling and reporting is an advantage. • Valid UAE Driving License is preferred.</p>

<p>We are looking for Site Engineer oversees day-to-day construction activities on-site, ensuring projects are completed safely, on time, within budget, and according to engineering designs and specifications. This role bridges the gap between the design team, project managers, and subcontractors.</p> <p>Key Responsibilities<br /> On-Site Execution &amp; Supervision Site Supervision:<br /> Manage daily construction activities, coordinating labor, subcontractors, and equipment to keep the project on schedule.<br /> Setting Out:<br /> Supervise site surveying, leveling, and setting out of reference points, benchmarks, and structural lines.<br /> Quality Control:<br /> Inspect materials, concrete pours, and structural elements to ensure compliance with project specifications, IFC drawings, and local building codes.<br /> Safety Enforcement: Enforce strict Health,<br /> Safety, and Environment (HSE) protocols on site, identifying risks and correcting unsafe work practices.</p> <p>INTERESTED CANDIDATE CAN SEND THEIR UPDATED CV TO EMAIL: aljamalproject.development@gmail.com</p>