Equipment operator Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>•&nbsp;&nbsp;&nbsp;&nbsp;To maintain a high quality, safe and effective CPT Probing service to clients<br>•&nbsp;&nbsp;&nbsp;&nbsp;To liaise with geologists, engineers, consultants and all other stakeholders involved in the geotechnical investigation/project<br>•&nbsp;&nbsp;&nbsp;&nbsp;To provide leadership, promote teamwork amongst crewmembers and provide training and guidance on company standards, procedures and CPT techniques to crewmembers<br>•&nbsp;&nbsp;&nbsp;&nbsp;Responsible for adherence to company's Policies, Operational Procedures, Occupational Health Safety and Environmental &amp; Quality Standards<br>•&nbsp;&nbsp;&nbsp;&nbsp;Knowledge of suitable CPT investigative techniques to ensure successful deliverables as stated on project scope of work<br>•&nbsp;&nbsp;&nbsp;&nbsp;Ensure that concerns over the quality of the CPT operation and relevant operational matters are effectively communicated to senior personnel in order for concerns to be addressed<br>•&nbsp;&nbsp;&nbsp;&nbsp;Ensure that field crews are suitably trained and equipped to perform the task required of them by providing regular training on technical areas as well as general procedural matters<br>•&nbsp;&nbsp;&nbsp;&nbsp;Management and thorough maintenance of Assets on site - CPT plant, support vehicles, miscellaneous tools &amp; parts etc<br>•&nbsp;&nbsp;&nbsp;&nbsp;Thorough investigation and documentation of all incidences and accidents on site as per Drilling's procedure<br>•&nbsp;&nbsp;&nbsp;&nbsp;Compliance with company reporting requirement - ensuring details are accurate, activities properly documented and all charge-able items and activities are clearly documented<br>•&nbsp;&nbsp;&nbsp;&nbsp;Perform land based and/or nearshore CPT probing operations<br>•&nbsp;&nbsp;&nbsp;&nbsp;Acquisition of CPT data during test execution<br>•&nbsp;&nbsp;&nbsp;&nbsp;To interact between CPT and drilling operations<br>•&nbsp;&nbsp;&nbsp;&nbsp;Work in compliance with HSE regulations<br>•&nbsp;&nbsp;&nbsp;&nbsp;Use any equipment, protective devices or clothing required by the employer<br>•&nbsp;&nbsp;&nbsp;&nbsp;Tell the employer or supervisor about any known missing or defective equipment or protective device that may be dangerous<br>•&nbsp;&nbsp;&nbsp;&nbsp;Report any known workplace hazard or violation of the Act to the employer or supervisor<br>•&nbsp;&nbsp;&nbsp;&nbsp;Not remove or make ineffective any protective device required by the employer or by the regulations<br>&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary: The Storekeeper – Interior Fit-Out is responsible for managing the receipt, storage, issuance, and inventory control of construction materials, tools, equipment, and consumables required for interior fit-out projects. The role ensures proper stock management, accurate inventory records, timely material issuance, and compliance with company procedures to support uninterrupted project execution. Key Responsibilities: Receive, inspect, and record incoming materials, tools, equipment, and consumables against purchase orders and delivery notes. Verify the quantity, quality, and condition of materials received and report any discrepancies or damages. Organize and store materials safely in designated storage areas to prevent damage and facilitate easy retrieval. Issue materials, tools, and equipment to project sites based on approved material requisitions. Maintain accurate stock records and update inventory transactions in the ERP or inventory management system. Conduct regular stock counts and periodic inventory audits to ensure inventory accuracy. Monitor stock levels and coordinate with the Procurement team for timely replenishment of materials. Track the movement of materials between the warehouse and project sites. Ensure proper labelling, identification, and storage of all materials. Maintain records of goods received notes (GRNs), delivery notes, material issue vouchers, and return notes. Coordinate with project teams regarding material requirements, shortages, and delivery schedules. Monitor the condition and maintenance of warehouse equipment and storage facilities. Ensure proper housekeeping, cleanliness, and organization of the warehouse. Implement safe storage practices and ensure compliance with HSE policies and procedures. Prepare daily, weekly, and monthly inventory and stock movement reports. Requirements Diploma or High School Certificate; additional certification in Warehouse Management or Supply Chain is an advantage. Minimum 3–5 years of experience as a Storekeeper in interior fit-out, construction, joinery, or manufacturing industries. UAE/GCC experience is preferred. Benefits As per industry standards.</p> </div>

<p>Our Tier 1 Civil Contracting client has a new requirement for a well experienced Appointed Person (Lifting Operations) to join their team in Abu Dhabi, UAE to work on a new villa construction project. Successful candidates will have a proven background as an Appointed Person on large scale new build projects working with Tower and mobile cranes and have worked with recognised main contractors in the UAE previously This role is available for immediate joining and is hiring as an initial 6 month contract position, outsourced through J10 Consulting. Key Responsibilities: • Have proven experience of Supervising and managing site lifting operations, maintenance, inspection and load testing act activities for Site Lifting Equipment including Tower Cranes, Mobile Cranes, Crawler Cranes, Fork Lifts, Winches, Electric Hoists, PUll Lifts, Chain Blocks, Wire Rope Slings, Webbing Slings, Chain Slings, Shackles, Eye Bolts, Winches, Container / Baskets, Minimum 5 years hands on experience on maintenance, inspection Load testing & certification Trouble Shooting, auditing of cranes and other fixed / loose lifting items • Able to prepare Lifting Plans, supervise and execute critical lifting in construction company projects. • Create and review Methods Statements, Risk Assessment and Job Safety Analysis Plans. Works in line with Company HSE Policy ensures Contractors subordinate are aware of, and comply with HSE procedures, rules and regulations for Rigging / Lifting Activities. • Able to manage the process for verifying the competency of Lifting Team (Appointed Person, Lifting Supervisor, Crane Operator and Rigger / Banksman) • Have Broad based knowledge and conversant with international standards relevant to Lifting Equipment and Operations • Remain up to date with Health & Safety at Work Guidelines • Attend client and company management meetings on and off site regarding site rigging issues. • Have thorough knowledge of Local legislations • Have skills in Contracts Management of Third Party Lifting Equipment Inspection</p><p>Appointed Person Experience: Holding Bachelor Degree or Diploma in Engineering or Equivalent Professional Qualification Minimum of 6 years in Lifting Operations or as an AP LEEA Accredited Training for Lifting Operations / Lifting Appointed Person Course Have adequate knowledge in Computer Software and related applications and reporting Proficient in English Language Construction Project Experience</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Role Description: <br><br>We are seeking a dedicated Gaming Equipment Administration Team Leader to manage and oversee gaming equipment operations, ensuring compliance with company standards. Responsibilities include inventory management, equipment analysis, process standardization, and team supervision. You will train and coach team members, create workflows, and collaborate with multiple departments to enhance operational efficiency. This role requires strong organizational skills, technical expertise, and the ability to work in a fast-paced, dynamic environment.<br><br>Responsibilities:<br><br>Inventory Management and Control: Maintain records and oversee the quality and quantity of all gaming equipment, such as roulette wheels, dice, cards, and auxiliary equipment. Ensure studios are equipped with necessary and functional gaming tools. Equipment Analysis and Testing: Regularly inspect roulette balls, playing cards, and other gaming equipment to ensure compliance with company standards. Monitor and address deviations or defects. Procurement and Order Management: Place orders for new equipment or spare parts (e.g., felts, rims, dice) as needed for operations. Coordinate with suppliers to ensure timely delivery. Administrative Oversight: Perform related administrative tasks, such as documenting inventory changes, tracking testing equipment, and managing photo session tools. Create and maintain accurate reports and logs. Staff Supervision and Development: Delegate tasks, organize workflows, and evaluate team performance. Motivate and coach new employees, providing training as needed to ensure high team efficiency. Process Standardization: Develop and implement workflows, procedures, and key performance indicators (KPIs) to enhance team productivity. Contribute to process standardization in line with ISO requirements. Problem Resolution: Take a proactive approach in identifying and resolving issues or anticipating potential challenges in gaming equipment management. Collaboration: Work closely with departments such as Training, Risk/Surveillance, and HR to ensure alignment with company objectives. Reporting and Communication: Prepare detailed daily, quarterly, and yearly reports on KPIs, budget reviews, and team activities for senior management. Compliance and Safety: Ensure compliance with company policies, industry standards, and legislative requirements. Maintain the confidentiality of company information and prioritize workplace health and safety.<br><br><br>Requirements:<br><br>Educational Background: University degree in a relevant field. Work Experience: Minimum 2 years in a similar role, preferably in gaming or equipment management. Technical Proficiency: Strong PC skills and familiarity with inventory management tools. Organizational Skills: Exceptional ability to manage workflows, inventory, and team tasks effectively. Communication Skills: Excellent verbal and written communication skills in English. Flexibility: Availability to work in shifts (8 hours/day, 5 days a week, across 3 shifts). Attention to Detail: High level of accuracy and precision in all tasks.<br><br><br>Nice to Have:<br><br>Process Improvement Expertise: Experience with ISO process standardization. Technical Knowledge: Familiarity with gaming equipment testing and calibration. Additional Skills: Fluency in additional languages for improved collaboration across regions.<br><br><br>What We Offer:<br><br>Competitive salary. Private health insurance from day one. International work environment. Opportunities for advancement to higher positions<br><br><br>Ready to Elevate Your Career? Join ARRISE Today!<br><br>About Us:<br><br>ARRISE is a leading supplier of player-favorite content to the i Gaming industry. We are a software development and services company delivering end-to-end digital solutions. Headquartered in Gibraltar, with offices around the world—including Malta, Serbia, Romania, India, Canada, UAE, Brazil, Colombia, Bulgaria—we are a global team of over 12,000 talented individuals with decades of experience across multiple industries and professions. Together, we form a cross-functional powerhouse driven to deliver

<ul><li>Lead and supervise a team of electrical testers, ensuring adherence to safety protocols and quality standards during all testing procedures.</li><li>Develop and implement comprehensive electrical testing plans and schedules for various projects, optimizing resource allocation and timelines.</li><li>Oversee the accurate calibration and maintenance of all testing equipment, guaranteeing reliable and precise measurements.</li><li>Interpret complex electrical schematics, blueprints, and technical specifications to guide testing activities and troubleshoot issues.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering or a related field from a recognized institution.</p></li><li><p>Minimum of 5-7 years of progressive experience in electrical testing, with a strong focus on industrial or power systems.</p></li><li><p>Possession of relevant certifications such as Certified Electrical Safety Professional (CESP) or equivalent is highly advantageous.</p></li><li><p>Demonstrated expertise in testing high voltage equipment, protection relays, and power systems up to 132kV or higher.<br><br></p><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in construction (not design), Pipeline / Oil & Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.<br></p><p><strong>Age Criteria:</strong></p><p>Maximum age limit is 49 years</p><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience<br></p><p><strong>Managerial and SR. Positions:</strong></p><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory<br></p><p><strong>Interview Date: </strong>Mumbai - 09th Aug 2026, Sunday, Chennai - 12th Aug 2026, Wednesday & Kochi - 16th Aug 2026, Sunday - Reporting time – 08:30 AM to 12:00 PM & 2:30 PM to 3:30 PM<br></p><p><strong>Mumbai - Mirage Hotel,</strong></p><p>Mumbai International Airport Approach Road, Near Marol Aqua Metro Stn. Andheri (East), Mumbai, Maharashtra, India – 400 059.</p><p>Waiting Hall – Amber Hall<br></p><p><strong>Chennai - The Residency Towers,</strong></p><p>115, Sir Thyagaraya Road, Chennai 600017</p><p>Waiting Hall – Senator Hall<br></p><p><strong>Kochin - Crowne Plaza Kochi,</strong></p><p>XI 641A Kundanoor Junction, NH-47 Bypass</p><p>Maradu, Ernakulam, Kerala, India, 682305</p><p>Waiting Hall – Onam Hall</p></li></ul>

<p>A established company is looking for a Pipe Fitter to install, assemble, maintain, and repair piping systems according to project specifications, drawings, and safety standards.</p> <p>Key Responsibilities<br /> Install, assemble, and repair pipes, fittings, valves, and related components.<br /> Read and understand piping drawings, layouts, and measurements.<br /> Cut, thread, bend, and prepare pipes as required.<br /> Align and connect pipes using appropriate tools and techniques.<br /> Inspect piping systems for leaks, damage, and proper installation.<br /> Coordinate with welders, plumbers, technicians, and other site workers.<br /> Follow project specifications and supervisor instructions.<br /> Maintain tools and equipment in good working condition.<br /> Follow UAE workplace health and safety procedures.<br /> Use appropriate PPE and maintain a clean and safe work area.<br /> Requirements<br /> Previous experience as a Pipe Fitter is preferred.<br /> Knowledge of pipe installation, fitting, and maintenance.<br /> Ability to read basic piping drawings and measurements.<br /> Familiarity with hand tools and pipe-fitting equipment.<br /> Relevant trade certificate or technical qualification is an advantage.<br /> Good physical fitness and ability to work on construction sites.<br /> Strong teamwork and communication skills.<br /> UAE experience is an advantage.<br /> Application</p> <p>&#x1f4f1; Interested candidates are invited to send their updated CV via WhatsApp: +971 542765817</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities</strong></p><ul><li><p>Conduct independent third-party inspections of Lifting equipment and lifting accessories</p></li><li><p>Perform frequent site visits across UAE to execute inspections, coordinate with client/site teams, and ensure inspection readiness and safety compliance.</p></li><li><p>Verify compliance with applicable UAE regulations/standards, manufacturer requirements, approved documents, and internal procedures.</p></li><li><p>Ensure compliance with ISO/IEC 17020, company Quality Management System, and Type A independence/impartiality requirements.</p></li><li><p>Face and support EIAC/LEEA technical audits/assessments (including witness audits).</p></li><li><p>Support development/improvement of technical inspection/test methods where applicable (procedures, checklists, acceptance criteria, work instructions) aligned with accreditation requirements.</p></li><li><p>Train and mentor other inspection engineers to standardize inspection practices, improve reporting quality, and develop competency.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking an Technical Manager with strong UAE experience in third-party inspections to perform independent inspections of lifting equipment &amp; accessories. The role includes review of equipment's, report/certificate issuance, participation in EIAC/LEEA audits, site visits, and training/mentoring other inspection engineers, in compliance with ISO/17020.</p><p></p></section>

BEC Arabia is seeking an experienced PMV - Tower Crane Supervisor to join our Logistics Department in Khobar. This pivotal role involves overseeing the safe and efficient operation of tower cranes across high-profile construction projects, ensuring compliance with industry standards and contributing to the success of Saudi Vision 2030 initiatives.<br><br>Job Description<br><br>About the Role<br><br>BEC Arabia, a leader in construction, infrastructure, and engineering, is seeking a highly skilled PMV - Tower Crane Supervisor to join our Logistics Department in Khobar. This role is critical to ensuring the safe and efficient operation of tower cranes across our diverse portfolio of projects, including commercial buildings, residential mega-projects, and government infrastructure initiatives. As part of our Project Management Vehicle (PMV) team, you will play a key role in maintaining operational excellence and compliance with safety standards.<br><br>In this position, you will oversee the deployment, maintenance, and inspection of tower cranes, ensuring optimal performance and adherence to regulatory requirements. You will collaborate closely with project managers, site supervisors, and equipment operators to ensure seamless crane operations that align with project timelines and budgets. This is an excellent opportunity for a seasoned professional to contribute to BEC Arabia’s mission of delivering world-class infrastructure while advancing your career in a dynamic and supportive environment.<br><br>Key Responsibilities<br><br>Supervise the installation, operation, and dismantling of tower cranes across multiple project sites. Ensure compliance with safety standards, including ISO 45001, Saudi Building Code (SBC), and other relevant regulations. Conduct regular inspections and preventive maintenance to ensure the reliability and safety of all tower cranes. Coordinate with project managers and site supervisors to schedule crane operations in alignment with project timelines. Monitor crane operator performance and provide guidance to ensure adherence to operational protocols. Develop and implement risk assessment plans for crane operations to mitigate potential hazards. Maintain accurate records of crane usage, maintenance, and inspections for regulatory compliance. Liaise with equipment vendors and suppliers to ensure timely delivery of spare parts and services. Train crane operators and maintenance staff on safety procedures and equipment handling. Prepare detailed reports on crane operations, incidents, and maintenance activities for senior management. Optimize crane utilization to improve efficiency and reduce operational costs. Respond promptly to any operational issues or emergencies, ensuring minimal disruption to project timelines.<br><br>Required Qualifications<br><br>Bachelor’s degree in Mechanical Engineering, Civil Engineering, or a related field. Minimum of 7 years of experience in tower crane operations, maintenance, and supervision within the construction industry. Certification in Crane Safety Operations (e.g., CPCS, NCCCO, or equivalent). Comprehensive knowledge of Saudi Building Code (SBC) and ISO 45001 safety standards. Proficiency in maintenance management systems and tools. Strong understanding of load charts, rigging techniques, and crane configurations. Saudi Council of Engineers (SCE) registration (mandatory for KSA-based roles). Familiarity with GOSI and other Saudi labor regulations.<br><br>Preferred Qualifications<br><br>NEBOSH International General Certificate in Occupational Health and Safety. Experience working on Saudi Vision 2030 mega-projects. Advanced knowledge of crane automation systems and remote monitoring technologies. Proficiency in Auto CAD or similar design software for crane placement planning. Strong project management skills with a PMP certification. Fluency in both English and Arabic.<br><br>Working Conditions<br><br>Based in Khobar, Saudi Arabia, with frequent travel to construction sites across the region. Work environment includes both office settings and outdoor construction sites, requiring the use of Personal Protective Equipment (PPE). Exposure to varying weather conditions, including high temperatures typical of the Gulf region. Standard working hours with occasional overtime and weekend work to meet project deadlines. Collaborative work environment with a diverse, multinational team.<br><br>What We Offer<br><br>Competitive salary and benefits package, including housing and transportation allowances. Opportunities for career growth and professional development within a leading construction firm. Access to training programs and certifications to enhance technical and leadership skills. A safety-first culture with a strong commitment to employee well-being. The chance to work on iconic projects contributing to Saudi Vision 2030. A dynamic, multicultural work environment that values innovation and excellence.<br><br>Join Us<br><br>If you are a results-driven professional with a passion for excellence in construction and infrastructure, we invite you to apply for the PMV - Tower Crane Supervisor role at BEC Arabia. Together, let’s build the future of the Kingdom of Saudi Arabia.<br><br>Required Skills<br><br>Tower crane operations ISO 45001 compliance Saudi Building Code (SBC) Maintenance management systems Load chart analysis Crane safety certifications (CPCS, NCCCO)<br><br>Preferred Skills<br><br>NEBOSH certification Crane automation systems Remote monitoring technologies Auto CAD for crane planning PMP certification Bilingual (English and Arabic)<br><br>Share this job<br><br>Linked In Twitter Email

<p>Senior Facility Engineer – Duties and Responsibilities (Air Base)</p><ol><li><p>Facility Operations & Maintenance</p></li></ol><p>Manage the day-to-day operation and maintenance of all air base facilities.</p><p>Ensure all MEP (Mechanical, Electrical, and Plumbing) systems are functioning efficiently.</p><p>Supervise preventive, corrective, and predictive maintenance activities.</p><p>Monitor critical systems such as HVAC, generators, UPS, transformers, air compressors, water systems, and fuel systems.</p><p>Ensure uninterrupted operation of mission-critical facilities.</p><ol><li><p>Team Management</p></li></ol><p>Lead and supervise Facility Engineers, Supervisors, Technicians, and subcontractors.</p><p>Allocate manpower according to operational priorities.</p><p>Conduct daily toolbox talks and safety briefings.</p><p>Evaluate staff performance and identify training requirements.</p><ol><li><p>Planned Preventive Maintenance (PPM)</p></li></ol><p>Develop and implement annual maintenance plans.</p><p>Ensure all PPM activities are completed as per schedule.</p><p>Review maintenance reports and verify work completion.</p><p>Minimize equipment downtime through effective maintenance planning.</p><ol><li><p>Corrective Maintenance</p></li></ol><p>Respond immediately to emergency maintenance requests.</p><p>Investigate equipment failures and identify root causes.</p><p>Coordinate repairs to minimize operational disruptions.</p><p>Ensure all maintenance activities comply with OEM recommendations.</p><ol><li><p>Health, Safety & Environment (HSE)</p></li></ol><p>Ensure compliance with HSE regulations and air base safety standards.</p><p>Conduct regular safety inspections and risk assessments.</p><p>Monitor Permit-to-Work (PTW) systems.</p><p>Participate in emergency response drills.</p><p>Ensure proper use of PPE by all personnel.</p><ol><li><p>Asset Management</p></li></ol><p>Maintain an accurate asset register.</p><p>Monitor equipment lifecycle and recommend replacement of obsolete assets.</p><p>Track warranty periods and service contracts.</p><p>Ensure calibration of testing equipment.</p><ol><li><p>Contract & Vendor Management</p></li></ol><p>Monitor subcontractor performance.</p><p>Review maintenance contracts and service agreements.</p><p>Verify completed work before approving invoices.</p><p>Coordinate with suppliers for spare parts and equipment.</p><ol><li><p>Budget & Cost Control</p></li></ol><p>Prepare maintenance budgets.</p><p>Monitor operational expenses.</p><p>Recommend cost-saving initiatives without compromising reliability.</p><p>Control spare parts inventory.</p><ol><li><p>Client Coordination</p></li></ol><p>Serve as the primary technical point of contact with the client.</p><p>Attend coordination meetings.</p><p>Provide technical advice and engineering solutions.</p><p>Ensure client complaints are resolved promptly.</p><ol><li><p>Reporting</p></li></ol><p>Prepare daily, weekly, and monthly maintenance reports.</p><p>Monitor KPIs and SLAs.</p><p>Submit incident and root cause analysis reports.</p><p>Maintain maintenance records and documentation.</p><ol><li><p>Compliance</p></li></ol><p>Ensure compliance with:</p><p>UAE Civil Defence requirements</p><p>Local authority regulations</p><p>Environmental regulations</p><p>OEM standards</p><p>Military/Air Base security procedures</p><p>ISO 9001, ISO 14001, and ISO 45001 requirements (where applicable)</p><ol><li><p>Engineering Support</p></li></ol><p>Review engineering drawings and technical specifications.</p><p>Evaluate modification requests.</p><p>Support new facility construction and renovation projects.</p><p>Conduct site inspections and technical assessments.</p><ol><li><p>Emergency Response</p></li></ol><p>Act as the engineering focal point during emergencies.</p><p>Coordinate restoration of critical services.</p><p>Ensure backup power systems remain operational.</p><p>Participate in business continuity planning.</p><ol><li><p>Documentation</p></li></ol><p>Maintain:</p><p>As-built drawings</p><p>O&M manuals</p><p>Equipment history records</p><p>Asset registers</p><p>Calibration certificates</p><p>Test reports</p><p>Inspection records</p><p>Key Performance Indicators (KPIs)</p><p>PPM completion 100%</p><p>Equipment availability 99.5%</p><p>SLA compliance 100%</p><p>Emergency response within contractual limits</p><p>Zero Lost Time Incidents (LTI)</p><p>High client satisfaction</p><p>Timely closure of corrective actions</p><p>Effective budget control and reduced maintenance costs</p><p>Typical Systems Under the Senior Facility Engineer</p><p>HVAC and Chillers</p><p>Split & Package AC Units</p><p>Electrical Distribution (HV/LV)</p><p>Generators and UPS</p><p>Lighting Systems</p><p>Fire Alarm & Fire Fighting Systems-Support only</p><p>Plumbing & Drainage</p><p>Water Storage & Pumping Systems</p><p>Building Management System (BMS)</p><p>Compressed Air Systems</p><p>Fuel Storage & Distribution</p><p>Hangars and Aircraft Support Facilities</p><p>Roads, Pavements, and External Infrastructure</p><p><strong>Desired Candidate Profile</strong></p><p>Nationality-Unrestricted Nationality</p><p>Expereience-10 years up </p><p>Age: 40 and above</p><p>Bachelor's degree in Engineering is a must</p>

<p>Company Description: For 170 years, Veolia has been a global leader in providing water, energy, and waste management solutions. Serving public authorities and industries across 58 countries, our comprehensive services are essential to human development and sustainable growth. As we progress alongside economic growth and human development, we continuously adapt and innovate, designing solutions that positively impact the environment and conserve resources. Veolia focuses on local solutions to purify and preserve vital resources, mitigate resource depletion, decarbonize lifestyles and production methods, and adapt to the impacts of climate change. Our mission is to build a better 21st century, and we proudly identify as #resourcers. Key figures of Veolia Near and Middle East: - Over 3,900 employees in the Middle East (in addition to the nearly 6,000 employees for Enova, which reports directly to Veolia Africa Middle-East for Facility Management and Energy Efficiency contracts in the region) - A robust local network across the region, including the UAE, Oman, Qatar, Bahrain, Kuwait, Lebanon, Turkey, Jordan, and Saudi Arabia - 40 years of sustainable partnerships In the Middle East, Veolia collaborates with industries, governments, communities, and commercial businesses to deliver innovative and sustainable solutions needed today, while maintaining a vision for tomorrow. Through public-private partnerships and innovative contractual schemes, Veolia is dedicated to achieving measurable results with pragmatic, sustainable environmental solutions. For more information, please visit our Website. Job Description: Main Accountabilities: We are seeking a skilled Welder to join our Waste Management Department. You will be responsible for welding and fabricating components for waste management equipment. Detailed Job Description: - Perform welding operations on various materials and equipment - Inspect and prepare materials for welding - Maintain welding equipment and tools - Ensure work meets quality and safety standards</p><p>Required Qualifications : - Valid welding certification - Proven welding experience - Knowledge of health and safety protocols - Attention to detail and precision Preferred Qualifications : - Experience in waste management or industrial equipment - Multiple welding certifications (MIG & Stick)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A leading global e-vapor brand is building a new manufacturing facility in the KEZAD Free Zone, Abu Dhabi, and is hiring 4-5 Manufacturing Engineers to join our factory setup and production team. KEZAD is the UAE's largest industrial free zone, adjacent to Khalifa Port, located between Abu Dhabi and Dubai. Fresh engineering graduates studying in China are highly welcome - basic Chinese is enough.</p><br><p>Industry: E-vapor Manufacturing / FMCG / Next-Generation Products. Working Languages: English or Hindi plus basic Chinese. Salary: Negotiable - we offer a competitive market-rate package based on experience and interview.</p><br><p>Key responsibilities:</p><p>Support production line setup, commissioning and process optimization. Develop and maintain process documents, SOPs and work instructions. Monitor production efficiency, yield and quality, and drive continuous improvement. Coordinate with Chinese technical teams, equipment suppliers and local operators. Provide on-floor technical support and operator training.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Bachelor's degree in Mechanical, Industrial, Electrical, Manufacturing or a related field. Fresh graduates welcome; manufacturing or production-line experience is a plus. Fluent in English or Hindi plus basic Chinese communication (able to work with Chinese teams). Hands-on attitude, willing to work on the production floor. Candidates currently in China, India or the UAE are all welcome.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Crane Operator RM <p>Crane Operator II (Finished) </p><br> <p>JOB DETAIL </p><br> <p>General Summary </p><br> <p>Handling of billets including and picking up of billets from billet transfer equipment, stacking in </p><br> <p>locations, cast , grade and size wise ensuring no mix up between casts and feeding the billets to </p><br> <p>rolling mill furnace charging grids as per Rolling program and loading of trailers for shifting outside as </p><br> <p>well as internal shifting. Ensuring no interruption of mill operations due to billet feeding. </p><br> <p>Essential Duties and Responsibilities (Key Accountabilities) </p><br> <p> Efficient &amp; Safe handling of billets. </p><br> <p> Liaise with Mill production team for feeding to rolling mills and removing off size/shape/grade </p><br> <p>billets when instructed. </p><br> <p> Ensure that one crane is operation when production is in process, never leave the crane when </p><br> <p>other cranes are not in operation and the production is going on. </p><br> <p> Ensure pre-operation checks of major crane controls </p><br> <p> Operating cranes as per safe crane operational practices. </p><br> <p> Shift billets from one location to another when needed. </p><br> <p> Ensure billets are picked up for charging from location mentioned in rolling program and </p><br> <p>instructed by shift controller </p><br> <p> Ensure each grade and size billets are stacked separately. </p><br> <p> Loading of trailers as and when instructed for either internal shifting or outdoor shifting. </p><br> <p> Ensure adequate coordination amongst other crane operators to prevent safety incidence and </p><br> <p>render uninterrupted service to production departments and loading of dispatch truck. </p><br> <p> Stack billets in secure manner. </p><br> <p> Report on crane performance to the shift controller in every shift. </p><br> <p> Remove ejected billets from furnace charging grid area and stack in secure manner </p><br> <p> Assist engineering crew when assistance is sought by them while attending to maintenance </p><br> <p>issues. </p><br> <p> Maintain the crane operating cabin clean </p><br> <p> Shifting of material from one location to another to accommodate production </p><br> <p>Additional Duties and Responsibilities </p><br> <p> Assist shift controller in special requirement of handling material . </p><br> <p> Assist shift controller exercising control and monitoring of inventory management, investigation </p><br> <p>of safety &amp; environment incidents. </p><br> <p>Assist shift controllers in accomplishing other material handling requirements </p><br> <p>Knowledge, Skills and/or Abilities (attributes) required </p><br> <p>To perform this job successfully, an individual must be able to perform each duty satisfactorily. The </p><br> <p>requirements listed below are representative of the knowledge, skills, and abilities required. </p><br> <p> Good physical capabilities and health., </p><br> <p> Ability to judge distance, height, vision, clearance, hearing, color distinction, reasonable </p><br> <p>quick reflexes and asses the load weight </p><br> <p> Basic knowledge of rigging and safe crane operation. </p><br> <p> Conversant with hand signals for crane operation and hazards involved in cranes operation </p><br> <p> Ability to read and understand verbal and written communications and interpret Rolling </p><br> <p>programs. </p><br> <p> Technical knowledge of crane operation and its controls and carry out pre operation checks </p><br> <p>Minimum Education Qualifications (Must Haves) Any preferred professional </p><br> <p>training (Nice to have) </p><br> <p> 10 years of fulltime school education Technical (Mechanical or electrical ) </p><br> <p>education </p><br> <p> Possess UAE appropriate operating </p><br> <p>license. </p><br> <p> Training in crane operation</p><br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A leading global e-vapor brand is building a new manufacturing facility in the KEZAD Free Zone, Abu Dhabi, and is hiring 4-5 Manufacturing Engineers to join our factory setup and production team. KEZAD is the UAE's largest industrial free zone, adjacent to Khalifa Port, located between Abu Dhabi and Dubai. Fresh engineering graduates studying in China are highly welcome - basic Chinese is enough.</p><p>Industry: E-vapor Manufacturing / FMCG / Next-Generation Products. Working Languages: English or Hindi plus basic Chinese. Salary: Negotiable - we offer a competitive market-rate package based on experience and interview.</p><p>Key responsibilities:</p><p>Support production line setup, commissioning and process optimization. Develop and maintain process documents, SOPs and work instructions. Monitor production efficiency, yield and quality, and drive continuous improvement. Coordinate with Chinese technical teams, equipment suppliers and local operators. Provide on-floor technical support and operator training.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Bachelor's degree in Mechanical, Industrial, Electrical, Manufacturing or a related field. Fresh graduates welcome; manufacturing or production-line experience is a plus. Fluent in English or Hindi plus basic Chinese communication (able to work with Chinese teams). Hands-on attitude, willing to work on the production floor. Candidates currently in China, India or the UAE are all welcome.</p><p></p></section>

<p>JOB PURPOSE: Reporting into the Country Manager, the Service Manager will lead a team of Service Engineers to ensure operational, technical and financial performance targets are met for their assigned depot. This will include service improvement and any associated financial budgetary oversight while constantly seeking improvements to drive operational excellence. In this highly autonomous role, he will also develop and implement plans to ensure that projects and repairs are delivered on time and within the specified budget. The Service Manager will also play an active part in strengthening our existing customer relationships by providing expert advice and servicing their customers to an extremely high standard. He will also support the wider business teams by identifying opportunities for additional, repeat or new business. This is a hands-on role, working on a variety of powered access equipment working on site and off site. It is based in the depot but will also require travel to sites when required. KEY RESPONSIBILITIES: Maintenance Operations • Manage the operational technical service functions across the assigned geographical region to ensure project plans and timescales are met • Drive, implement the operational excellence (Tech-X) programme to ensure continual improvements throughout the Engineering department • Monitor operational and financial data and review against agreed forecasts and targets • Implement technical strategy to deliver the high-quality fleet reliability and service to our customers • Produce monthly service schedule and organise workload of engineers to ensure all work is completed in accordance within agreed timescales • Identify, plan, procure and logistically manage the fleet, tools and materials to service demand • Maintain fleet performance and appearance as per manufacturer and company guidelines • Produce month-end reports and analysis such as machine reliability, breakdown and performance and inspection for senior management review. Provide recommendations for improvements where necessary • Ensure pre-delivery inspections (PDI) of each machine is carried out at depot or on site as required, and is in conformance with manufacturers specification and company policy Lead the required activity to customer breakdowns to ensure prompt and considered response to the despatch of mobile service engineers • Establish safety and security procedures. Ensures that all health and safety legislation is adhered to Team Management • Support the Country Manager with recruitment and selection of engineering staff • Day-to-day service management of the technical service teams • Ensure performance of all staff achieves agreed objectives • Identify training and development needs of service engineer staff and provide training and development in line with achievement of individual, depot and corporate objectives • Responsible for understanding and practicing appropriate safety procedures as follows: • Act as safely at work as you would elsewhere, if not more so • Use the tools available to you to maintain a safe environment • Participate in the safety training programme to educate yourself on hazards, safety practices, and rules • Communicate about unsafe practices and conditions • Always follow safety rules and regulations</p><p>The chosen candidate will meet ALL the essential criteria below: ESSENTIAL • Extensive technical knowledge within the powered access, heavy plant, construction or engineering industry sector • An in-depth understanding of global standard operating procedures and governance • Must have a successful track record in hands on experience and be able to demonstrate highly effective engineering skills with hydraulics, pneumatics, electrical, mechanical and diesel engines • Ability to analyse data, diagnose root cause engineering issues and take action to deliver sustained improvement • Understanding of business planning activities including cost management and cost recovery, resource management and organisational design • Costs control and financial knowledge • Must be fully conversant with Health & Safety legislation • Must have previous experience of managing engineering teams and motivating employees to perform as a team • A clean driving licence DESIRABLE • Educational qualification in any industry-related field • IPAF Operator Licence and /or IPAF Demonstrator Licence • Experience working abroad or managing multicultural teams Key Demographic Requirements - applicants must be: Based in UAE</p>

<p>A proactive and detail-oriented asset and inventory professional responsible for managing, tracking, and maintaining all assets and consumable inventory across the DEC Housekeeping division. This role ensures effective asset control, adherence to audit standards, and supports operational efficiency through timely reporting and strategic stock planning. The Asset Controller will coordinate with supervisors, storekeepers, and the procurement team to ensure equipment, tools, and consumables are accounted for, distributed correctly, and maintained in good condition. This role also involves ensuring compliance with DEC policies and providing cost control and usage tracking insights.</p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Inventory and Asset Control</p><p><br></p><p>Maintain an up-to-date log of all assets (machines, equipment, tools, consumables) used in the DEC Housekeeping division. Ensure accurate documentation of issuance, transfers, and returns. Conduct physical audits monthly and report discrepancies</p></li></ol><p><br></p><ol start="2"><li><p>Data and System Management</p><p><br></p><p>Ensure all asset and inventory data are recorded in the INFO EAM system. Generate and analyze reports related to asset utilization, loss, repair status, and replacements. Maintain barcoding and tagging systems for assets. Infrastructure and Event Readiness Work closely with Housekeeping Supervisors to forecast asset and material needs for events and infrastructure tasks. Provide required items in a timely manner with complete checklists.</p><p><br></p></li><li><p>Health and Safety Compliance</p><p><br></p><p>Ensure all equipment and tools are stored in compliance with DWTC standards. Maintain MSDS sheets for consumables. Conduct risk checks before deployment of machinery or items.</p><p><br></p></li><li><p>Financial Accountability</p></li></ol><p><br></p><p>Support the budgeting process by providing accurate stock consumption records, identifying high-usage items, and contributing to asset life-cycle planning. Report anomalies in monthly asset utilization.</p><p><br><br></p>

Qualifications Experience in Installation and repair of Shot blasting Machines Ability to perform basic mechanical troubleshooting, routine maintenance, and inspections of shot blasting machine. Strong awareness of safety procedures, use of personal protective equipment, and adherence to workplace health and safety regulations. Ability to read and follow work instructions, job cards, and production schedules with attention to detail. Physical ability to work in an industrial environment, including standing for extended periods Prior experience in an industrial or fabrication setting; shot blasting or metal finishing experience in the Gulf region is an advantage. Basic communication skills in English, Hindi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform general maintenance and repair activities for manufacturing plant equipment.</p></li><li><p>Operate workshop machinery including <strong>lathe, milling, drilling, and grinding machines</strong> safely and efficiently.</p></li><li><p>Repair damaged mechanical components such as <strong>shafts, bushes, sleeves, and other fabricated parts</strong> during equipment breakdowns.</p></li><li><p>Carry out machining, fitting, and fabrication work as per maintenance requirements.</p></li><li><p>Support preventive and corrective maintenance activities to reduce equipment downtime.</p></li><li><p>Read and interpret mechanical drawings and technical specifications where required.</p></li><li><p>Inspect repaired components to ensure they meet quality and dimensional standards.</p></li><li><p>Maintain workshop tools, machinery, and equipment in good working condition.</p></li><li><p>Follow company safety procedures, housekeeping standards, and maintenance best practices.</p></li><li><p>Coordinate with the Maintenance team to ensure timely completion of repair work.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>iploma or ITI/Technical Certificate in Mechanical Engineering, Machinist, Fitter, or a related trade.</p></li><li><p><strong>3–5 years of experience</strong> as a Workshop Technician or Machinist in a manufacturing or industrial environment (preferably FMCG or beverage industry).</p></li><li><p>Hands-on experience operating <strong>lathe, milling, drilling, and grinding machines</strong>.</p></li><li><p>Strong knowledge of machining, fabrication, fitting, and mechanical repair techniques.</p></li><li><p>Experience repairing mechanical components such as shafts, rollers, bushes, couplings, and similar parts.</p></li><li><p>Ability to troubleshoot mechanical issues and provide effective repair solutions during equipment breakdowns.</p></li><li><p>Good understanding of workshop safety practices and preventive maintenance.</p></li><li><p>Team player with good problem-solving skills and the ability to work under pressure during plant breakdowns.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p>We are seeking a motivated and target-oriented <strong>Outdoor Sales Executive</strong> with a <strong>valid UAE driving license</strong> to promote and sell <strong>welding equipment, cutting tools, and welding accessories.</strong> The ideal candidate will be responsible for generating new business, managing customer relationships, and achieving sales targets through regular client visits and market development activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li><p>Identify and develop new business opportunities within the construction, fabrication, manufacturing, and industrial sectors.</p></li><li><p>Promote and sell welding consumables, cutting equipment, welding machines, consumables and safety accessories.</p></li><li><p>Conduct regular customer visits to generate sales and strengthen client relationships.</p></li><li><p>Prepare and submit quotations, negotiate pricing, and close sales orders.</p></li><li><p>Follow up on inquiries, quotations, and outstanding payments.</p></li><li><p>Achieve monthly and annual sales targets set by the management.</p></li><li><p>Monitor market trends, competitor activities, and customer requirements.</p></li><li><p>Coordinate with the operations and logistics teams to ensure timely delivery of orders.</p></li><li><p>Maintain accurate records of customer interactions, sales activities, and market feedback.</p></li><li><p>Provide periodic sales reports and forecasts to management.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum 1–3 years of <strong>outdoor sales experience in welding products, cutting tools, industrial equipment, consumables or related products.</strong></p></li><li><p>Strong knowledge of welding consumables, cutting equipment, and safety accessories.</p></li><li><p><strong>Valid UAE driving license (mandatory).</strong></p></li><li><p>Excellent communication, negotiation, and relationship-building skills.</p></li><li><p>Ability to work independently and achieve sales targets.</p></li><li><p>Proficiency in MS Office applications.</p></li><li><p>Strong customer service and problem-solving abilities.</p></li></ul><p></p></section>

An Operations Process Engineeroptimizes manufacturing, production, or industrial workflows to maximize efficiency, quality, and safety while reducing costs. Key duties include analyzing process trends, troubleshooting equipment issues, developing standard operating procedures (SOPs), and implementing new, cost-effective technologies. They work to improve production capacity and ensure compliance with safety/regulatory standards.<br><br>Key Responsibilities And Duties<br><br> Process Optimization: Analyze existing manufacturing processes to improve efficiency, productivity, and yield.<br><br> Design Implementation: Design, test, and install new equipment or process upgrades to enhance production capabilities.<br><br> Troubleshooting: Identify, diagnose, and resolve daily operational and equipment issues to minimize downtime.<br><br> Documentation Compliance: Develop and maintain technical documentation, including SOPs, Process Flow Diagrams (PFD), and Failure Mode and Effects Analysis (FMEA).<br><br> Safety Quality: Ensure processes comply with safety, environmental, and quality standards, such as ISO.<br><br> Data Analysis: Monitor process KPIs, such as cycle times and yield rates, to inform data-driven decisions.<br><br> Training Collaboration: Train operators on new processes and collaborate with maintenance, quality, and production teams.<br><br>This job is provided by Shine.com