Factory Jobs

Responsible for the clarifications from the customer, consultants regarding HVAC equipment’s Selections of the HVAC equipment according to the customer specifications and customization of products according to customers nee<br>Core & Competitive Abilities:Education - Bachelor’s degree in mechanical engineering.2-10 Years of experience within HVAC and Oil & Gas. Knowledge and Experience Application and technical knowledge in HVAC equipment (Required candidate shall have experience in application of HVAC units(Package, AHU, Chiller, FCU, Split unit, Condensing units etc)<br>Skills & Experience Technical Skills: Strong knowledge of HVAC systems and equipment Understanding of oil & gas project requirements Ability to interpret drawings and specifications Proficiency in MS Excel, MS office and estimation tools Commercial Skills: Cost analysis and pricing strategy Tender documentation preparation Basic contract and commercial knowledge Negotiation support<br>• Customer Oriented • Team work • Result Oriented • Priority & Time Management • Effective Communication • Attention to Details<br>Main Performance Areas Duties, Responsibilities & Authorities1. Estimation & Costing Prepare detailed cost estimates for HVAC systems and equipment for oil & gas projects. Analyze RFQs, tender documents, and project specifications. Coordinate with factory for pricing and technical data. Prepare techno-commercial proposals within bid timelines.2. Technical Evaluation & Compliance Review client specifications and ensure full technical compliance. Support in equipment selection based on project requirements. Ensure compliance with UAE and oil & gas industry standards. Assist in preparation of submittals and approval documents.3. Sales & Business Development Support Assist sales team in preparing proposals and presentations. Participate in client meetings and technical discussions. Support negotiations and contract finalization. Develop understanding of client needs and market trends.4. Post-Award Support Assist in handover of awarded projects to execution team. Support variation pricing and commercial clarifications. Monitor project cost performance for future estimates.<br>QHSE & Excellence Standards1. Strictly adhere to established Quality (ISO 9001), Health and Safety (ISO 45001), Environment (ISO 14001) standards, policies, and procedures.2. Work towards the accomplishment of departmental objectives and relevant KPIs.3. Collaborate with suppliers and contractors to ensure they also comply with QHSE standards and requirements.4. Recognize the impact of manufacturing processes on product quality and customer satisfaction.5. Follow all guidelines to ensure the safety and well-being of yourself and your colleagues.6. Familiarize yourself with emergency procedures and evacuation routes.7. Report immediately any incident/Accident, potential hazards or unsafe conditions promptly

Company Description Store Makers - Middle East brings together JWP Technical Services, HDD Interiors, and umdasch under one unified organization since January 1, 2022. This combination creates one of the largest and most recognized retail interiors companies in the Middle East. The group offers integrated design, technical, and fit-out solutions for diverse retail environments. Team members collaborate across brands and disciplines to deliver high-quality, innovative store concepts for regional and international clients. Role Description Ø Responsible for timely completion and accuracy of technical project work.Ø Create 3D models based on client proposed details for furniture, and installations.Ø Produce Detailed 2D approval drawings for individual items of furniture.Ø Maintain a detailed projected time plan of all items within a project submission.Ø Maintain project log of approval drawings submissions.Ø Create requests for information for a complete technical understanding of requirements.Ø Propose mock up details of furniture and installations to ensure effective delivery to client.Ø Produce changes to drawings based upon client comments and feedback.Ø Suggest value engineering options for furniture and installations.Ø Provide assistance to Procurement and PM departments during material approval process.Ø Maintenance and update of ERP system (eg. BOM, Project Hours, Drawing Details).Ø Use in-house work manager software to database all 3D and 2D content.Ø Provide technical support to Estimation, Procurement, PM and Key Account Managers.Ø Retrieve necessary technical information in project kick off meetings.Ø Produce and check detailed workshop drawings for in house factory and vendors.Ø Follow company procedure for saving and filing relevant project data.Ø Maintain clear lines of communication throughout the businessØ Work in an organized fashion to ensure successful completion of projects. Includes: maintaining personal task/to do lists, time management.Ø Support the Project Management with the execution of projectsØ Make site visits where necessaryØ Make vendor visits where necessaryØ Supports the Management Team as and when required. Qualifications & Competencies:Ø Technical Design or Engineering Degree or equivalentØ At least 5 years’ experience in shopfitting industry.Ø 3D modeling to a high level of proficiencyØ 2D technical drawing to a high level of proficiencyØ Proficient in English

Gemini Building & Contracting is seeking a highly organized and detail-oriented Project Engineer to join our growing team. The ideal candidate will play a critical role in planning, coordinating, monitoring, and delivering construction projects while ensuring compliance with technical, quality, safety, and budget requirements.<br>Job repsobsibilities:1. Project Planning & Scheduling Defining Scope: Translating client needs and blueprints into clear, actionable project scopes. Creating Schedules: Utilizing tools like Gantt charts or Critical Path Method (CPM) software to map out timelines, milestones, and deadlines. Resource Allocation: Determining the manpower, equipment, and materials needed for each phase. Review and Submission of MSA and Shop drawing2. Technical Design & Integration Reviewing Plans: Examining engineering drawings, specifications, and schematics for accuracy, feasibility, and compliance with codes. RFI Management: Handling Requests for Information (RFIs)—clarifying design ambiguities between the field teams and the design engineers. Submittal Review: Ensuring that materials and equipment ordered by contractors match the exact engineering specifications required.3. Cost Control & Budgeting Estimating: Assisting in the preparation of initial project bids and cost estimates. Tracking Expenditures: Monitoring daily or weekly spend against the allocated budget to prevent overruns. Change Orders: Reviewing, negotiating, and documenting changes to the project scope that alter the original budget or timeline.4. Communication & Stakeholder Coordination Liaison: Serving as the main point of contact between Project Managers, clients, subcontractors, vendors, and senior leadership. Progress Reporting: Preparing regular status reports, dashboards, and presentations outlining project health. Meeting Facilitation: Leading coordination meetings to resolve conflicts, align teams, and clear bottlenecks.5. Quality Assurance & Safety (QA/QC) Site Inspections: Regularly visiting the field or factory floor to verify that work is being executed according to the approved engineering designs. Safety Compliance: Ensuring all operations adhere to OSHA, environmental regulations, and company safety protocols. Final Punch Lists: Overseeing the testing, commissioning, and final walkthroughs before handing the project over to the client. Qualification:Bachelor's Degree in Civil Engineering is mandatory Minimum 3–5 years of experience in construction project coordination or project engineering in UAE construction industry Excellent communication, coordination, and problem-solving skills. Proficiency in Microsoft Office Suite and project reporting tools. Ability to manage multiple priorities in a fast-paced construction environment.

<ol><li><p>Manage <strong>Trade Licence, Economic Department, Establishment Card and company registration</strong> matters.</p></li><li><p>Handle <strong>MOHRE, Immigration, ICP/GDRFA, work permit and visa-related transactions</strong>.</p></li><li><p>Coordinate <strong>Municipality, Civil Defence, CIC/Defence and other government approvals</strong>.</p></li><li><p>Manage government permits, certificates, renewals and inspections for factory, warehouse, office and accommodation facilities.</p></li><li><p>Coordinate government inspections and ensure timely closure of observations.</p></li><li><p>Maintain records and trackers for licences, permits, certificates and expiry dates.</p></li><li><p>Manage government portals, applications, documentation and payments.</p></li><li><p>Liaise with government authorities, Tasheel, Amer and external service providers.</p></li><li><p>Ensure timely renewal of company licences, permits and regulatory approvals.</p></li><li><p>Support HR, Administration and Operations on government-related matters.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>4–7 years of proven <strong>UAE PRO / Government Relations</strong> experience.</p></li><li><p>Strong knowledge of <strong>UAE government procedures and company licensing</strong>.</p></li><li><p>Hands-on experience with <strong>Trade Licence, MOHRE, Municipality, Civil Defence, CIC/Defence and Immigration</strong>.</p></li><li><p><strong>Food Manufacturing / FMCG industry experience is preferred.</strong></p></li><li><p>Good working knowledge of <strong>English, Arabic, Hindi and Malayalam</strong>.</p></li><li><p>UAE Driving Licence is preferred.</p></li><li><p>Strong communication, coordination and follow-up skills.</p></li><li><p>Ability to independently manage multiple government transactions and deadlines.<br><strong><br>Key Skills</strong><br></p><p> PRO, Government Relations, UAE Government Relations, Trade Licence, MOHRE, Immigration, ICP, GDRFA, Municipality, Civil Defence, CIC, Defence Approvals, Government Licensing, Government Permits, Regulatory Compliance, Government Inspections, Establishment Card, Government Portals, Food Manufacturing, FMCG.</p></li></ol>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, implement, and manage scalable and secure Azure infrastructure solutions, including compute, storage, and networking.</li><li>Automate infrastructure provisioning, configuration, and deployment using Infrastructure as Code (IaC) tools like Terraform or ARM templates.</li><li>Develop and maintain CI/CD pipelines for efficient application deployment and infrastructure updates within Azure DevOps or GitHub Actions.</li><li>Monitor Azure environments for performance, security, and cost optimization, implementing proactive measures to address issues.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent practical experience.</p></li><li><p>Proven experience (6 years) in designing, deploying, and managing complex Azure environments.</p></li><li><p>Hands-on experience with Infrastructure as Code (IaC) tools such as Terraform, ARM templates, or Bicep.</p></li><li><p>Strong understanding of Azure networking concepts (VNet, NSGs, Firewalls, Load Balancers) and security best practices.</p></li></ul><br><p>Azure Databricks ( Databicks Asset Bundle), SYnase, Data factory, Logic App, EventHU, Networking Hub Spoke Vnet Model, Argocd, Azure DevOps CI/CD pipelines, AKS, GitOps, Storage Account, Log analytics)</p><br><p>a. Setup &amp; Configuration of HW Resources (On-Prem, Cloud) b. Provisioning of necessary resources (Platform, Service etc) c. Ensuring software versions (OS, Middleware, Software) are on the right versions &amp; patches as per policy d. Working with members of a cross-functional product team, utilizing the latest technology to implement and support platforms for analytical use-cases e. Requires a fundamental understanding of business process development, a strong technical ability, and analytical mindset f. Activities include scoping, development, implementation, and testing g. Responsible for monitoring analytical systems to ensure that the environments run smoothly</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, implement, and manage scalable and secure Azure infrastructure solutions, including compute, storage, and networking.</li><li>Automate infrastructure provisioning, configuration, and deployment using Infrastructure as Code (IaC) tools like Terraform or ARM templates.</li><li>Develop and maintain CI/CD pipelines for efficient application deployment and infrastructure updates within Azure DevOps or GitHub Actions.</li><li>Monitor Azure environments for performance, security, and cost optimization, implementing proactive measures to address issues.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent practical experience.</p></li><li><p>Proven experience (6 years) in designing, deploying, and managing complex Azure environments.</p></li><li><p>Hands-on experience with Infrastructure as Code (IaC) tools such as Terraform, ARM templates, or Bicep.</p></li><li><p>Strong understanding of Azure networking concepts (VNet, NSGs, Firewalls, Load Balancers) and security best practices.</p></li></ul><br><p>Azure Databricks ( Databicks Asset Bundle), SYnase, Data factory, Logic App, EventHU, Networking Hub Spoke Vnet Model, Argocd, Azure DevOps CI/CD pipelines, AKS, GitOps, Storage Account, Log analytics)</p><br><p>a. Setup &amp; Configuration of HW Resources (On-Prem, Cloud) b. Provisioning of necessary resources (Platform, Service etc) c. Ensuring software versions (OS, Middleware, Software) are on the right versions &amp; patches as per policy d. Working with members of a cross-functional product team, utilizing the latest technology to implement and support platforms for analytical use-cases e. Requires a fundamental understanding of business process development, a strong technical ability, and analytical mindset f. Activities include scoping, development, implementation, and testing g. Responsible for monitoring analytical systems to ensure that the environments run smoothly</p><p></p></section>

Job Summary:The Material Engineer is responsible for ensuring that all construction materials used on building projects comply with project specifications, international standards, and client requirements. The role involves material approval, supplier coordination, testing, quality assurance, and supporting site teams to ensure timely availability of approved materials while maintaining the highest quality standards.<br>Key Responsibilities:Review project specifications, drawings, and contract requirements related to construction materials. Prepare and submit material submittals, technical data sheets, and samples for consultant/client approval. Coordinate with procurement, suppliers, and subcontractors to ensure timely delivery of approved materials. Evaluate and approve material sources and suppliers in compliance with project specifications. Monitor material testing activities through approved laboratories and ensure compliance with ASTM, BS, ACI, EN, and local authority standards. Review material test reports and maintain complete records of approvals and inspections. Conduct factory visits and supplier audits when required. Resolve material-related technical issues and provide engineering recommendations. Coordinate with QA/QC and site engineers to ensure only approved materials are used. Monitor inventory of critical materials and identify potential supply risks. Ensure compliance with Dubai Municipality, DDA, Trakhees, and other applicable regulatory requirements. Prepare material compliance reports and support project handover documentation. Participate in value engineering initiatives to optimize material selection while maintaining quality and cost efficiency. <br>Qualifications:Bachelor's Degree in Civil Engineering, Materials Engineering, or a related discipline. Minimum 5–8 years of experience as a Material Engineer on building construction projects in the UAE. Experience with high-rise residential, commercial, mixed-use, hospitality, or industrial projects. UAE driving license is preferred. <br>Key Skills:Material Engineering Construction Materials Concrete Technology Steel & Reinforcement Finishing Materials Waterproofing Systems Façade & Cladding Materials Material Testing & Inspection Material Submittals Technical Evaluation Supplier & Vendor Management Quality Assurance & Quality Control (QA/QC) ASTM, BS, ACI & EN Standards Auto CAD Microsoft Office <br>Knowledge & Competencies:Strong knowledge of construction materials and testing procedures. Familiarity with UAE construction standards and authority requirements. Excellent analytical and problem-solving skills. Strong coordination and communication abilities. Ability to manage multiple material approvals within project deadlines. Detail-oriented with excellent documentation and reporting skills. Strong stakeholder management and teamwork capabilities.

<p>Position Title: Draftsman (ID Fit-Out & Joinery) Employment Type: Full- Time Salary AED: Up to 12K inclusive depending on experience and qualifications Job Location: Abu Dhabi About the Client: A leading Abu Dhabi based interior design and fit-out company with over 25 years of experience delivering high-end, turnkey interior solutions across diverse industries. Job Description: • Prepare and develop detailed shop drawings, IFC drawings, and as-built drawings for a range of projects including high-end residential villas, commercial offices, retail spaces, and hospitality projects (restaurants, cafés, hotels), ensuring full compliance with design intent, authority standards, and site conditions. • Produce comprehensive joinery and millwork drawings such as wardrobes, kitchens, vanities, feature walls, ceilings, and custom furniture, including detailed sections, elevations, and material specifications suitable for factory production and on-site installation. • Coordinate with design, estimation, and project execution teams to translate concepts into technically sound drawings, resolve design clashes, and incorporate site conditions, MEP coordination, and material selections into final outputs. • Conduct site visits, measurements, and drawing validations, ensuring accuracy prior to production, while maintaining strict version control and timely submission of drawings to support project timelines and approvals.</p><p>• Degree in Architecture, Interior Design, or a related field, with 3–5 years of UAE experience in interior fit-out and joinery drafting. • Strong proficiency in AutoCAD (mandatory); knowledge of SketchUp, 3ds Max, or Revit is an advantage. • Solid experience in joinery detailing and production drawings across residential, commercial, and hospitality projects, with a good understanding of materials, finishes, and fabrication processes. • Ability to interpret design concepts, work under pressure, and meet tight deadlines with strong attention to detail.</p>

<p>Guildhall is currently recruiting for a top-tier international contracting company delivering major high-speed rail and heavy civil infrastructure projects across the UAE. We are looking for an experienced HSE Head to take full ownership of Health, Safety & Environmental operations on a complex mega infrastructure project. This is a senior leadership opportunity for an HSE professional with strong technical capability, proven site management experience, and a track record of managing safety operations across large-scale construction environments. Key Responsibilities: - Lead and manage the overall HSE function across major construction packages. - Develop and implement project-specific HSE strategies, policies, and procedures. - Ensure compliance with UAE regulations, client requirements, and international HSE standards. - Provide leadership and direction to HSE teams, contractors, and subcontractors. - Drive safety culture, risk management, incident prevention, and continuous improvement initiatives. - Conduct audits, inspections, investigations, and corrective action management. - Work closely with project leadership, consultants, and stakeholders to achieve HSE objectives.</p><p>- Bachelor's degree in Civil Engineering or any related Engineering discipline. - Minimum of 15 years' HSE experience on major infrastructure, heavy civil, rail, or mega construction projects, including previous experience as an HSE Head, Senior HSE Manager, or Project HSE Manager. - Proven experience overseeing complex construction activities such as TBM tunnelling, underground stations, elevated viaducts, and precast yard/factory operations. - Strong leadership experience managing large HSE teams, contractors, and multiple project stakeholders within EPC environments. - Excellent knowledge of UAE HSE regulations, ISO management systems, risk management, incident investigation, and international HSE best practices. - Professional certifications such as NEBOSH Diploma, ISO 45001 Lead Auditor, CMIOSH, GradIOSH, CSP, or equivalent are highly desirable.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><strong>Administration Responsibilities </strong></p><br><ul><li><p>Manage the company's day-to-day administrative operations.</p></li><li><p>Maintain company records, licenses, permits, and registrations, ensuring timely renewals.</p></li><li><p>Coordinate employee and visitor transportation and manage company vehicle scheduling.</p></li><li><p>Ensure vehicle registrations, insurance, maintenance, and related documentation are up to date.</p></li><li><p>Report and follow up on vehicle-related incidents and maintain accurate records.</p></li><li><p>Monitor and manage administrative systems, including Salik, Darb, attendance, telecommunications, and related services.</p></li><li><p>Prepare monthly reports on transportation, fuel, vehicle maintenance, and administrative expenses.</p></li><li><p>Coordinate utility and telecommunication payments. Manage office supplies and administrative procurement.</p></li><li><p>Oversee company camps, site offices, and staff accommodation to ensure proper maintenance and compliance.</p></li><li><p>Provide general administrative support and perform other duties assigned by management.</p></li></ul><br><p><strong>Health, Safety &amp; Environmental Responsibilities </strong></p><ul><li><p>Implement and monitor the company's HSE Management System, ensuring compliance with UAE HSE regulations, client requirements, and company policies across the factory, warehouse, offices, and project sites.</p></li><li><p>Conduct regular HSE inspections and risk assessments, identify hazards, investigate accidents, incidents, and near misses, and ensure timely implementation of corrective and preventive actions.</p></li><li><p>Maintain HSE documentation and compliance records, including inspection reports, incident logs, PPE records, training records, emergency equipment inspections, and support internal/external HSE audits.</p></li><li><p>Promote a safe working environment by coordinating HSE inductions, toolbox talks, emergency drills, monitoring PPE compliance, and ensuring company facilities, camps, and work areas meet health, safety, and welfare standards.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Business Administration or a related field</p></li><li><p>Previous administrative or office experience in the UAE preferred</p></li><li><p>Strong organizational and time management skills</p></li><li><p>Proficiency in Microsoft Office</p></li><li><p>Good communication and teamwork skills</p></li></ul><p></p></section>

<ul><li>Drive heavy trailers for delivery of concrete blocks and building materials across the UAE.</li><li>Transport loads safely between the factory, customer sites and construction projects.</li><li>Coordinate with forklift operators during loading and unloading of block bundles.</li><li>Inspect the trailer and load before departure and ensure materials are properly positioned and secured.</li><li>Use appropriate straps, chains and load-securing equipment where required.</li><li>Follow assigned delivery schedules, routes and dispatch instructions.</li><li>Ensure timely deliveries while complying with UAE road and heavy-vehicle regulations.</li><li>Navigate construction sites, industrial areas and restricted-access delivery locations safely.</li><li>Conduct daily checks of tyres, brakes, lights, fluids, coupling systems and trailer condition.</li><li>Immediately report vehicle faults, accidents, fines, delivery delays or site-access issues.</li><li>Maintain delivery notes, trip sheets and other required transport documentation.</li><li>Obtain customer/site acknowledgement after successful delivery.</li><li>Maintain the vehicle in clean and safe operating condition.</li><li>Follow company HSE procedures and safe-driving requirements at all times.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Previous experience transporting concrete blocks, bricks, cement, precast products, steel or other heavy building materials strongly preferred.</li><li>Proven experience driving tractor-trailers / articulated heavy vehicles.</li><li>Strong knowledge of UAE roads, industrial areas and construction-site delivery procedures.</li><li>Familiarity with routes across Umm Al Quwain, Sharjah, Ajman, Dubai and other Emirates is preferred.</li><li>Good understanding of load securing, weight distribution and trailer safety.</li><li>Ability to safely reverse and manoeuvre trailers in factories, construction sites and confined loading areas.</li><li>Basic understanding of heavy-vehicle inspections and minor fault identification.</li><li>Good driving record with a strong commitment to road safety.</li><li>Ability to communicate effectively with dispatch, customers and site teams.</li><li>Willingness to work flexible hours based on delivery requirements.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Quality Inspection &amp; Control</p><ul><li><p>Conduct quality inspections of furniture, joinery, upholstery, metal works, stone works, and fit-out installations.</p></li><li><p>Ensure all works comply with approved shop drawings, specifications, BOQ requirements, and client expectations.</p></li><li><p>Perform incoming material inspections and verify material quality before production or installation.</p></li><li><p>Monitor production processes and site activities to ensure adherence to quality standards.</p></li><li><p>Identify defects, non-conformities, and quality issues and ensure timely corrective actions.</p></li><li><p>Conduct pre-delivery and pre-handover inspections.</p></li></ul><p>Production &amp; Site Monitoring</p><ul><li><p>Carry out routine factory inspections during manufacturing stages.</p></li><li><p>Inspect finished products before dispatch to project sites.</p></li><li><p>Conduct site quality inspections during installation and snagging stages.</p></li><li><p>Verify workmanship standards and installation quality.</p></li><li><p>Ensure approved samples and mock-ups are followed during execution.</p></li></ul><p>Documentation &amp; Reporting</p><ul><li><p>Maintain quality inspection reports, checklists, NCRs (Non-Conformance Reports), and corrective action records.</p></li><li><p>Prepare quality audit reports and submit findings to management.</p></li><li><p>Track recurring quality issues and recommend preventive measures.</p></li><li><p>Maintain records of inspections, testing, approvals, and project quality documentation.</p></li></ul><p>Continuous Improvement</p><ul><li><p>Support implementation of quality management systems and procedures.</p></li><li><p>Coordinate with Production, Procurement, Design, and Project teams to resolve quality concerns.</p></li><li><p>Participate in root cause analysis and quality improvement initiatives.</p></li><li><p>Conduct awareness sessions on quality standards and best practices when required.</p></li></ul><p>Health, Safety &amp; Compliance</p><ul><li><p>Ensure quality activities comply with company policies and safety requirements.</p></li><li><p>Follow UAE regulations, project specifications, and applicable quality standards.</p></li><li><p>Support internal and external quality audits.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree or Diploma in Civil Engineering, Interior Design, Architecture, Construction Management, or related field.</p><br><p>Additional Quality Control certifications will be an advantage.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>MUST HAVE HANDS ON EXPERIENCE IN RESIDENTIAL PROJECTS IN UAE</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>MUST HAVE Relevant Work Experience in FITOUT and JOINERY</p><p><br></p><p>Subject: Walk-In Interview (FIT OUT and JOINERY)</p><p>Dear Candidate,</p><p>We are pleased to invite you to attend our upcoming Walk-In Interview for UAE experienced candidates in the below roles</p><p>Open Positions:</p><ul><li><p><u>FACTORY MANAGER</u></p></li><li><p><u>DRAFTSMEN</u></p></li><li><p><u>FOREMEN</u></p></li><li><p><u>SUPERVISOR</u></p><br></li></ul><p><strong>Requirements:</strong></p><ul><li><p>4–6 Years UAE Experience</p></li></ul><p>Date &amp; Time: <u>21 June 2026 | 9:00 AM – 12:00 Noon</u></p><p>Location: Fixperts Training Center</p><p>Al Quoz Industrial Area -4.</p><p>Next to 3-star Metal.</p><p>Nearest Metro: On passive Metro Station</p><p>Bus No: F26. (15th stop - Habtoor Engineering)</p><p>Landmark: <strong>Between Three Star Metal Industry and Shaklan Supermarket</strong>.</p><br><p>Please bring your updated CV and relevant documents for the interview.</p><br><p>For any queries, feel free to reach us on WhatsApp: 056 218 7542.</p><p>We look forward to meeting you.</p><br><p>Best regards,</p><p>HR Department</p><p>Fixperts</p><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Expertise in Data Architecture, Data Strategy and Roadmap for large and complex organization and systems and implemented large scale end-to-end Data Management &amp; Analytics solutions Experience in transforming traditional Data Warehousing approaches to Big Data based approaches and proven track record of managing risks and data security Expertise with DW Dimensional modeling techniques, Star &amp; Snowflake schemas, modeling slowly changing dimensions and role playing dimensions, dimensional hierarchies, and data classification Experiences in cloud native principals, designs and deployments. Extensive experience working with and enhancing Continuous Integration (CI) and Continuous Development (CD) environments Expertise in Data Quality, Data Profiling, Data Governance, Data Security, Metadata Management, and Data Archival Define workload migration strategies using appropriate tools Drive delivery in a matrixed environment working with various internal IT partners Demonstrated ability to work in a fast paced and changing environment with short deadlines, interruptions, and multiple tasks/projects occurring simultaneously Must be able to work independently and have skills in planning, strategy, estimation, scheduling, Strong problem solving, influencing, communication, and presentation skills, self-starter Experience with data processing frameworks and platforms (Hadoop, Presto, Tez, Hive, Spark etc.) Hands on experience in work with bigdata platforms and related programming languages (e.g. Linux, Python, PySpark, GIT, Jenkins). Apply for this postion</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's or Master's degree in Computer Science, Engineering, or a related quantitative field.</li><li>Proven expertise in Python programming and its application in data manipulation and analysis.</li><li>Familiarity with cloud platforms such as AWS (S3, EMR, Glue), Azure (Databricks, Data Factory), or GCP (BigQuery, Dataproc).</li><li>Proficiency in SQL and experience with relational and NoSQL databases.</li><li>Experience with data warehousing concepts and tools (e.g., Snowflake, Redshift, BigQuery).</li></ul><p></p></section>

<ul><li><p>The Data Developer should be a full-stack data engineering professional with expertise in developing, integrating, and maintaining enterprise data solutions across hybrid cloud and on-premise environments. The role requires strong knowledge of ETL/ELT development, database development, data integration, data warehousing, and API-based integrations to support analytics, enterprise reporting, and operational systems. The Data Developer should ensure reliable, secure, and high-performance data pipelines while supporting enterprise data platforms and digital transformation initiatives.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum 5–7 years of experience in data engineering, ETL/ELT development, database development, or enterprise data integration.</p><p>•Experience in designing, developing, and maintaining enterprise data pipelines, ETL/ELT processes, and data warehouse solutions.</p><p>•Strong expertise in SQL, PL/SQL, database development, stored procedures, query optimization, and performance tuning.</p><p>•Hands-on experience in integrating data from multiple enterprise systems, databases, cloud platforms, APIs, and third-party applications.</p><p>•Experience with Oracle Database, Oracle Exadata, SQL Server, Hadoop, Azure Data Lake, Microsoft Fabric, Oracle Cloud Infrastructure (OCI), and cloud-based data platforms.</p><p>•Expertise in enterprise ETL and data integration tools such as Informatica, Oracle Data Integrator (ODI), SAP Data Integrator, and Azure Data Factory.</p><p>•Strong understanding of data warehousing concepts, data modeling, data transformation, data quality, and data security.</p><p>•Experience in developing API-based integrations, automation, and batch/real-time data processing solutions.</p><p>•Knowledge of DevOps practices, version control, CI/CD pipelines, and monitoring of enterprise data integration processes.</p><p>•Experience working with Oracle Fusion ERP, Student Information Systems (SIS), CRM, HR, Finance, and other enterprise applications is highly desirable.</p><p>•Experience in higher education data environments and supporting enterprise analytics, AI, and reporting initiatives will be an added advantage.</p><p>Skills</p><p>ETL/ELT development</p><p>database development</p><p>data integration</p></li></ul>

<ol><li><p>Key-station backup: When line operators are absent, off-station or new hires cannot keep pace, step in immediately to keep the line from stopping due to any single station.</p></li><li><p>New-hire coaching: Provide hands-on coaching to new employees, teaching operation techniques and quality-judgement standards to shorten the learning curve and reach standard output (UPH) quickly.</p></li><li><p>Line material pulling: Help the line leader monitor station material stock, coordinate with the material handler to replenish materials in time, and stack and move finished/semi-finished goods neatly.</p></li><li><p>First line of quality defense: Perform real-time patrols during production, assisting the line leader in supervising SOP compliance, with a focus on the operation quality of key stations.</p></li><li><p>Line discipline: Assist the line leader in managing labor discipline (dress code, off-station registration, no station-swapping, etc.) and maintain on-site 5S and hygiene.</p></li><li><p>Reports & records: Help the line leader tally hourly output, defect quantity and downtime, keeping the production dashboard updated in real time.</p></li><li><p>Shift support: Assist with pre-shift meetings and post-shift site clean-up to ensure smooth line handover.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Education: High school / secondary technical diploma or above.</p></li><li><p>Experience: 1+ years of assembly-line experience in an electronics factory, with a solid understanding of e-cigarette assembly or packaging; a multi-skilled (all stations) background preferred.</p></li><li><p>Language: Basic English communication (understands management instructions and can guide foreign workers with simple words).</p></li><li><p>Core skills: Nimble and fast; able to withstand long standing hours and a high-paced line.</p></li><li><p>Potential: Some organizational and communication ability; a reserve line-leader candidate aspiring to a management role.</p></li><li><p>Personal qualities: Proactive and cooperative; able to follow the line leader's and supervisor's overtime and rotation arrangements.</p></li></ol>

<p>Senior Quality Engineer – Procurement (Cross Country Pipeline) </p><p>Location: Abu Dhabi Site Based Job</p><br><p>Industry: Oil & Gas / EPC / Cross Country Pipeline </p><p>Experience: 10–15 Years </p><br><p>Job Description: We are seeking an experienced Senior Quality Engineer – Procurement for a major Cross Country Pipeline project in Saudi Arabia. The ideal candidate should possess extensive experience in procurement quality engineering, vendor quality surveillance, inspection coordination, and material compliance for oil & gas pipeline projects.</p><p><strong>Desired Candidate Profile</strong></p><p>Key Responsibilities</p><ul><li><p>Review and approve vendor quality documents, including ITPs, QAPs, Material Test Certificates (MTCs), and manufacturing procedures.</p></li><li><p>Ensure procured materials comply with project specifications, international standards, and client requirements.</p></li><li><p>Coordinate vendor inspections, Factory Acceptance Tests (FAT), and Third-Party Inspection (TPI) activities.</p></li><li><p>Monitor supplier quality performance and resolve quality-related issues.</p></li><li><p>Review manufacturing records, inspection reports, and certification documents.</p></li><li><p>Coordinate with Procurement, Engineering, QA/QC, Expediting, and Construction teams to ensure timely delivery of quality materials.</p></li><li><p>Perform supplier audits and vendor assessments as required.</p></li><li><p>Ensure compliance with Saudi Aramco standards, project specifications, and international codes.</p></li><li><p>Support material receiving inspections and documentation during project execution.</p></li><li><p>Prepare procurement quality reports and maintain quality records.</p></li></ul><br><p>Requirements</p><ul><li><p>Bachelor's Degree in Mechanical Engineering, Metallurgical Engineering, or a related engineering discipline.</p></li><li><p>10–15 years of experience in Procurement Quality for Oil & Gas EPC projects.</p></li><li><p>Proven experience on Cross Country Pipeline projects is mandatory.</p></li><li><p>Strong knowledge of procurement quality processes, vendor inspections, and supplier quality management.</p></li><li><p>Familiarity with Saudi Aramco standards, ASME, API, ASTM, ISO 9001, and international quality requirements.</p></li><li><p>Experience in inspection of line pipes, fittings, flanges, valves, structural steel, coating materials, and pipeline equipment.</p></li><li><p>Strong communication, coordination, and report preparation skills.</p></li></ul><br><p>Preferred Certifications</p><ul><li><p>ISO 9001 Lead Auditor</p></li><li><p>CSWIP 3.1 / AWS CWI (Preferred)</p></li><li><p>ASNT Level II (Added Advantage)</p></li><li><p>Saudi Aramco project experience is highly preferred.</p></li></ul>

<ol><li><p>Jig & fixture tuning: Install, debug and maintain production-line jigs and fixtures; adjust tightness, travel and positioning in line with real-time production conditions to keep operation smooth without damaging the product.</p></li><li><p>On-site abnormality handling: Respond quickly to process abnormalities reported by line leaders and repair simple mechanical faults on the line to reduce downtime.</p></li><li><p>Changeover support: During product changeover, assist the line leader in adjusting workstation layout, replacing limit samples and matching fixtures, and perform preliminary first-article debugging.</p></li><li><p>Preventive inspection: Regularly inspect and lubricate tools, air screwdrivers, electric drivers and auxiliary equipment in the assigned area to detect and eliminate hidden faults early.</p></li><li><p>Wear-part management: Handle the requisition and replacement of line wear parts (nozzles, springs, locating pins, etc.), and carry out simple on-site repair of damaged fixtures or report them for scrapping.</p></li><li><p>Improvement support: Based on operator feedback, work with NPI or ME engineers to fine-tune existing simple fixtures or add poka-yoke (mistake-proofing) devices.</p></li><li><p>On-site 5S: Keep the repair toolbox tidy and clean up the site after repairs, ensuring no leftover parts or tools remain on the line.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Background: Technical school, secondary technical diploma or above, with a mechanical/electromechanical background.</p></li><li><p>Experience: 1-2+ years of front-line maintenance or machine-tuning experience in an electronics factory; e-cigarette, precision-electronics or small-appliance experience preferred.</p></li><li><p>Hands-on ability: Strong hands-on ability; skilled with manual and power tools (soldering iron, hand drill, hex wrenches, etc.) and an intuitive grasp of mechanical structures.</p></li><li><p>Language: Basic English communication (understands basic instructions such as Tighten/Loosen/Broken and reads English equipment labels).</p></li><li><p>Execution: Fast-reacting; able to locate and fix physical faults quickly in a high-paced production environment.</p></li><li><p>Communication: Communicates well with line leaders and operators and takes on-board front-line feedback.</p></li></ol>

<p><strong>Hiring: Joinery Cost Estimator</strong></p><br><p><strong>Location:</strong> UAE</p><p><strong>Company:</strong> RUKOOZ WOOD INDUSTRIES LLC</p><br><p><strong>Job Summary:</strong></p><p>RUKOOZ is seeking an experienced and detail-oriented <strong>Joinery Cost Estimator</strong> to join our growing team. The successful candidate will be responsible for preparing accurate cost estimates and tender submissions for custom joinery, architectural woodwork, and interior fit-out projects while ensuring competitive pricing and profitability.</p><br><p><strong>Key Responsibilities:</strong></p><ul><li><p>Review tender documents, drawings, specifications, and BOQs.</p></li><li><p>Prepare detailed cost estimates for joinery and woodworking projects.</p></li><li><p>Calculate material, hardware, labor, finishing, packaging, and installation costs.</p></li><li><p>Analyze production requirements and manufacturing processes to determine accurate project costs.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Prepare commercial and technical tender submissions.</p></li><li><p>Coordinate with design, production, procurement, and project management teams.</p></li><li><p>Conduct value engineering exercises and identify cost-saving opportunities.</p></li><li><p>Maintain and update cost databases, supplier pricing, and estimation records.</p></li><li><p>Support project handover by providing detailed cost breakdowns and project budgets.</p></li></ul><br><p><strong>Qualifications & Requirements:</strong></p><ul><li><p>Bachelor's Degree or Diploma in Engineering, Quantity Surveying, Construction Management, or a related field.</p></li><li><p>Minimum 3 years of experience in joinery and woodworking manufacturing estimation.</p></li><li><p>Strong knowledge of joinery materials, hardware, veneers, laminates, solid wood, finishes, and manufacturing processes.</p></li><li><p>Ability to read and interpret technical drawings and shop drawings.</p></li><li><p>Proficiency in Microsoft Excel and estimation software.</p></li><li><p>Strong analytical, organizational, and communication skills.</p></li><li><p>Knowledge of UAE market rates, suppliers, and subcontractors is highly preferred.</p></li></ul><br><p><strong>What We Offer</strong></p><ul><li><p>Career growth opportunities within a leading woodworking and joinery company.</p></li><li><p>Professional and collaborative work environment.</p></li></ul><br><p><strong>Subject:</strong> Application – Joinery Cost Estimator</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Preferred Skills:</strong></p><ul><li><p>Experience in architectural joinery, doors, wardrobes, kitchens, and fit-out projects.</p></li><li><p>Understanding of factory production workflows and installation requirements.</p></li><li><p>Ability to manage multiple tenders and meet strict deadlines.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><span>Assessing complex new data sources with a variety of SAP and non-SAP source system and quickly turning these into business insights ready data sets. Develop and support the implementation and integration of these new data sources into our Azure Data platform. <br></span></li><li><span>Perform detailed analysis of structured, semi-structured and unstructured data sources for quality, completeness and business value.<br></span></li><li><span>Required to design, document, develop, implement and test rapid prototypes that demonstrate the value of the data and present them to diverse audiences.<br></span></li><li><span>Required to participate in early state design and feature definition activities.<br></span></li><li><span>Responsible for designing, developing, and implementing robust and scalable data pipelines using the Microsoft Azure data platform and the Azure Databricks ecosystem.<br></span></li><li><span>Responsible for creating reusable and scalable data pipelines<br></span></li><li><span>Act as a team-player while collaborating with team members across multiple engineering teams to support the integration of proven prototypes into core intelligence products.<br></span></li></ul><br><span>Requirements</span><ul><li><span>Advanced working knowledge and experience with relational and non-relational databases <br></span></li><li><span>Experience building and optimizing Big Data pipelines, architectures, and data sets<br></span></li><li><span>Strong analytic skills related to working with unstructured datasets<br></span></li><li><span>Expertise in Azure Data factory, Databricks, EventHub, Python, PySpark ,Azure Synapse and SQL.<br></span></li><li><span>Azure DevOps experience mandatory to deploy the data objects.<br></span></li><li><span>7+ years of experience in the Azure Domain with minimum 5+ years of relevant experience.<br></span></li><li><span>Minimum 3 implementation experience from conceptualization to delivery of analytics capabilities on Azure platform.<br></span></li><li><span>Automotive domain experience is a must.<br></span></li><li><span>Knowledge/Experience with Azure cloud stack.<br></span></li><li><span>Knowledge of SAP IS-Auto, SAP BW/BO, Tableau, PowerBI will be considered as added advantage.<br></span></li><li><span>Certification on Azure platform toolset will be considered as added advantage<br></span></li><li><span>Bachelor’s degree in Computers or allied field of study.<br></span></li></ul><br> </div>