Financial Analyst Jobs in UAE

<ol><li><p>Showroom Robot Maintenance & Readiness</p></li></ol><p>1.1. Robot Setup & Preparation: Prepare showroom robots for daily demonstrations and customer visits, including charging, software checks, feed file updates, mapping, branding, announcements, and other required configurations.</p><p>1.2. Testing & Maintenance: Conduct routine checks to ensure showroom robots are functioning correctly, identify faults, carry out basic repairs and troubleshooting, and keep robots clean, updated, and ready for use.</p><p>1.3. Demo Readiness: Ensure all demo robots, chargers, accessories, controllers, and related equipment are available and in working condition before customer demonstrations.</p><ol><li><p>Support for Sold Robots</p></li></ol><p>2.1. Delivery & Installation: Prepare sold robots according to the approved scope, complete required configurations and testing, and support delivery, installation, and customer onboarding.</p><p>2.2. Technical Support: Provide after-sales support for sold robots by handling technical enquiries, troubleshooting issues remotely or on-site, and coordinating repairs where required.</p><p>2.3. Support Tickets & Documentation: Record customer issues, maintain support tickets, document troubleshooting steps and resolutions, and escalate complex issues to the relevant technical team when required.</p><ol><li><p>Robot Rental Operations</p></li></ol><p>3.1. Rental Preparation: Configure rental robots based on each project requirement, including branding, content, announcements, mapping, movement settings, and other approved customizations.</p><p>3.2. Pre- and Post-Rental Checks: Test robots before dispatch, record their condition, verify accessories and equipment, and inspect robots again upon return for any damage, missing items, or technical issues.</p><p>3.3. On-Site Rental Support: Support delivery, setup, testing, operation, and troubleshooting of rental robots at exhibitions, events, client premises, or other project locations when required.</p><ol><li><p>Customer Demonstrations & Technical Assistance</p></li></ol><p>4.1. Product Demonstrations: Conduct showroom demonstrations, explain robot features and applications, answer basic technical questions, and assist customers in understanding how the robot can be used for their requirements.</p><p>4.2. Customer Support: Respond to technical queries received through calls, email, chat, walk-ins, or support tickets and ensure issues are resolved or properly escalated.</p><p>4.3. Prospect Data Entry: Record prospective customer details, enquiries, requirements, and follow-up information accurately in the company CRM or designated system.</p><p><strong>Desired Candidate Profile</strong></p><p>1.1. Diploma or Bachelor’s degree in Robotics, Mechatronics, Electronics, Engineering, IT, or a related technical field.</p><p>1.2. Basic knowledge of robotics, software configuration, troubleshooting, networking, and technical support.</p><p>1.3. Comfortable conducting robot demonstrations and communicating with customers. Able to travel to client sites, exhibitions, and project locations. Willing to work flexible hours when required for rentals, events, deliveries, or customer support.</p><p>1.4. Physically able to safely lift, move, load, unload, and position robots, equipment, and project materials as part of the role.</p>

<p><strong>Presales Engineer – Data Center &amp; ICT Solutions</strong></p><p><strong>Location:</strong> Dubai, UAE</p><p><strong>Experience:</strong> 5 - 7 years</p><p><strong>Salary:</strong> AED 7,000–10,000 per month + benefits</p><p><strong>Notice Period:</strong> Immediate joiners / candidates available to relocate immediately preferred</p><p><br></p><p><strong>About the Role</strong></p><p>We are looking for an experienced <strong>Presales Engineer</strong> to join an established ICT Systems Integrator in Dubai.</p><p>The successful candidate will be responsible for understanding customer requirements, designing appropriate technical solutions, developing proposals and BoQs, supporting RFP/RFQ/RFI processes, and working closely with sales, vendors and customers throughout the presales cycle.</p><p>The ideal candidate should have strong experience in <strong>data center and enterprise infrastructure solutions</strong>, with the ability to translate business requirements into technically and commercially viable solutions.</p><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li>Gather and analyze customer technical and business requirements.</li><li>Design and architect ICT and data center solutions based on customer requirements.</li><li>Prepare technical proposals, solution designs, BoQs and solution sizing.</li><li>Manage and respond to RFPs, RFQs, RFIs and tenders.</li><li>Prepare technical documentation, scope of work and statements of compliance.</li><li>Conduct technical presentations and solution demonstrations for customers.</li><li>Support sales teams during customer meetings and opportunity development.</li><li>Coordinate with technology vendors and partners for solution development and pricing.</li><li>Support costing and commercial activities in coordination with the sales team.</li><li>Participate in Proof of Concept (PoC) activities where required.</li><li>Provide technical clarification during the bidding and negotiation process.</li><li>Support project handover from presales to implementation teams.</li><li>Maintain up-to-date knowledge of enterprise infrastructure and data center technologies.</li></ul><p><br></p><p><strong>Technical Experience</strong></p><p>Strong understanding of one or more of the following areas:</p><ul><li>Servers and Compute</li><li>Storage, SAN/NAS</li><li>Networking</li><li>Virtualization</li><li>Backup and Disaster Recovery</li><li>Business Continuity and High Availability</li><li>Data Center Infrastructure</li><li>Data Center Security</li><li>Cloud and Hybrid Cloud</li><li>Enterprise IT Infrastructure</li></ul><p>Experience with technologies/vendors such as <strong>Cisco, HPE, Dell, VMware, Microsoft, Fortinet, Sophos, Huawei, Veeam, Azure or AWS</strong> will be an advantage.</p><p><br></p><p><strong>Requirements</strong></p><ul><li>Bachelor's degree in IT, Computer Science, Engineering or a related field.</li><li><strong>5–7 years of relevant presales experience</strong> in ICT / IT infrastructure.</li><li>Strong experience in data center, enterprise infrastructure or systems integration environments.</li><li>Hands-on experience in solution design, BoQ preparation and technical proposal development.</li><li>Strong understanding of RFP/RFQ/RFI and tender processes.</li><li>Excellent written and verbal English communication skills.</li><li>Strong presentation and customer-facing skills.</li><li>Ability to work closely with sales, technical teams, vendors and customers.</li><li>Strong analytical and problem-solving abilities.</li><li>UAE/GCC experience will be an advantage.</li><li>Immediate joiners or candidates available to relocate immediately are preferred.</li></ul><p><br></p><p><strong>Compensation &amp; Benefits</strong></p><ul><li><strong>AED 7,000–10,000 per month</strong>, depending on experience and suitability.</li><li>Medical insurance.</li><li>Annual air ticket.</li><li>Other benefits as per company policy.</li></ul><p><br></p><p>Kindly send your resume on 971551226879 / jobs@elitehrconsultancy.com</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Senior Endur Developer <p><strong>Location:</strong> Remote (India)<br> <strong>Working Hours:</strong> Aligned to Abu Dhabi (UAE) business hours<br> <strong>Employment Type:</strong> Contract</p><br><br> About the Role <p>Our client is seeking an experienced <strong>Senior Endur Developer</strong> to support a portfolio of Endur enhancement, upgrade, and transformation initiatives. Operating in a highly collaborative environment, you will work closely with business stakeholders, architects, and delivery teams to design, develop, and implement solutions that support Front Office, Middle Office, Back Office, Risk, and Operations functions.</p><br><br> <p>This role requires a strong blend of Endur technical expertise and business engagement skills, with the ability to translate complex trading requirements into scalable Endur solutions.</p><br><br> Key Responsibilities <ul> <li>Partner with Front Office, Middle Office, Back Office, Risk, and Operations stakeholders to understand business requirements and support Endur-related change initiatives. </li><li>Participate in requirements workshops and contribute technical expertise during solution design discussions. </li><li>Translate business requirements, user stories, and functional specifications into robust Endur solutions. </li><li>Collaborate with Solution Architects and development teams to validate technical approaches and assess solution impacts. </li><li>Design, develop, configure, and enhance Endur applications, workflows, and integrations. </li><li>Support Endur upgrade, remediation, and platform optimisation programmes. </li><li>Develop and maintain technical documentation, design specifications, and implementation artefacts. </li><li>Support testing activities including test planning, defect triage, UAT support, and production releases. </li><li>Ensure requirements, development deliverables, testing activities, and releases remain fully traceable throughout the project lifecycle. </li><li>Identify opportunities for process improvement and enhanced utilisation of the Endur platform. </li></ul> Required Skills &amp; Experience <ul> <li>Strong experience as an Endur Developer within Energy Trading, Commodities, or Financial Markets environments. </li><li>Deep technical and functional understanding of the Endur platform. </li><li>Experience delivering Endur enhancements, customisations, integrations, or upgrade programmes. </li><li>Strong understanding of Front Office, Middle Office, Back Office, Risk, and Operations workflows. </li><li>Ability to work directly with business stakeholders and translate requirements into technical solutions. </li><li>Experience working within Agile delivery environments. </li><li>Strong analytical and problem-solving capabilities. </li><li>Experience using SQL and Excel for data analysis, troubleshooting, and validation. </li><li>Excellent communication skills with the ability to engage both technical and non-technical stakeholders. </li></ul> Preferred Experience <ul> <li>Experience supporting large-scale Endur upgrades or remediation programmes. </li><li>Exposure to OpenJVS, OpenComponents, AVS, Endur integrations, and reporting frameworks. </li><li>Experience working across distributed/global teams. </li><li>Knowledge of Energy Trading &amp; Risk Management (ETRM) processes. </li><li>Formal Business Analysis or Agile certifications would be beneficial. </li></ul> What We're Looking For <p>Successful candidates will be able to demonstrate:</p><br><br> <ul> <li>Endur development experience across complex trading environments. </li><li>Examples of delivering solutions that reduced rework and improved business alignment. </li><li>Strong stakeholder engagement across trading, risk, and operations functions. </li><li>Process improvements and platform enhancements delivered through Endur. </li><li>The ability to bridge the gap between business requirements and technical delivery </li></ul> <br><br> </div>

<p>We are hiring a Senior Sales Engineer to join our team, driving technical sales and client relationships in the oil &amp; gas or construction sector.</p> <p>Requirements:</p> <p>Bachelor&#8217;s degree in Mechanical Engineering<br /> 3–4 years of relevant experience in an oil &amp; gas or construction materials trading company<br /> Valid driving license (mandatory)<br /> Available for immediate joining<br /> Strong communication and client-facing skills (English &amp; Hindi Mandatory)<br /> Ability to understand technical specifications and translate them into client solutions</p> <p>Key Responsibilities:</p> <p>Manage and grow client accounts within the oil &amp; gas / construction materials sector<br /> Provide technical support and product recommendations to clients<br /> Achieve sales targets while maintaining strong customer relationships</p>

<p>We are hiring a Senior Sales Engineer to join our team, driving technical sales and client relationships in the oil &amp; gas or construction sector.</p> <p>Requirements:</p> <p>Bachelor&#8217;s degree in Mechanical Engineering<br /> 3–4 years of relevant experience in an oil &amp; gas or construction materials trading company<br /> Valid driving license (mandatory)<br /> Available for immediate joining<br /> Strong communication and client-facing skills (English &amp; Hindi Mandatory)<br /> Ability to understand technical specifications and translate them into client solutions</p> <p>Key Responsibilities:</p> <p>Manage and grow client accounts within the oil &amp; gas / construction materials sector<br /> Provide technical support and product recommendations to clients<br /> Achieve sales targets while maintaining strong customer relationships</p>

<p>Guildhall is proud to be supporting a leading client in Dubai on a landmark high-rise development project located in Dubai Creek. We are currently recruiting for an experienced Structural Engineer to join their project team. This is a key role responsible for overseeing structural coordination, execution, and technical supervision across multiple high-rise tower developments while ensuring structural integrity, compliance, and successful project delivery. Key Responsibilities: 1. Structural Design & Coordination -Review and coordinate structural drawings, calculations, and technical specifications for high-rise building projects -Ensure all structural works are executed according to approved drawings, design standards, and project requirements -Coordinate with architects, MEP engineers, consultants, and contractors to resolve structural and technical issues 2. Site Supervision & Technical Support -Monitor construction progress and provide technical support during all project phases -Conduct site inspections and ensure structural quality, safety, and compliance standards are met -Support site teams with engineering solutions and resolve structural challenges during execution 3. Documentation & Compliance -Review shop drawings, material submittals, method statements, and RFIs related to structural works -Ensure compliance with Dubai Municipality requirements, UAE regulations, and international engineering codes -Assist with structural risk assessments and implement corrective actions where required 4. Value Engineering & Optimization -Support value engineering initiatives and recommend practical structural solutions to improve project efficiency and cost effectiveness -Provide recommendations for construction methodologies and technical enhancements where applicable 5. Coordination & Reporting -Participate in project meetings with stakeholders and consultants -Provide regular technical reports and project updates to management -Coordinate effectively with project teams to ensure timely issue resolution and project continuity</p><p>-Bachelor’s Degree in Civil Engineering, Structural Engineering, or related field -Minimum 5–10 years of experience in structural engineering within high-rise building construction projects -Strong experience in reinforced concrete, steel structures, and tower developments (G+12 and above) -UAE project experience is highly preferred -Strong understanding of structural analysis, engineering principles, and construction methodologies -Familiarity with Dubai Municipality regulations, UAE building codes, and international standards -Proficiency in ETABS, SAFE, STAAD Pro, AutoCAD, and Revit is highly preferred -DM Certified Engineer (Unlimited Floors) is highly preferred or considered an advantage</p>

<p>Guildhall is proud to be supporting a leading client in Dubai on a landmark high-rise development project located in Dubai Creek. We are currently recruiting for an experienced Structural Engineer to join their project team. This is a key role responsible for overseeing structural coordination, execution, and technical supervision across multiple high-rise tower developments while ensuring structural integrity, compliance, and successful project delivery. Key Responsibilities: 1. Structural Design & Coordination -Review and coordinate structural drawings, calculations, and technical specifications for high-rise building projects -Ensure all structural works are executed according to approved drawings, design standards, and project requirements -Coordinate with architects, MEP engineers, consultants, and contractors to resolve structural and technical issues 2. Site Supervision & Technical Support -Monitor construction progress and provide technical support during all project phases -Conduct site inspections and ensure structural quality, safety, and compliance standards are met -Support site teams with engineering solutions and resolve structural challenges during execution 3. Documentation & Compliance -Review shop drawings, material submittals, method statements, and RFIs related to structural works -Ensure compliance with Dubai Municipality requirements, UAE regulations, and international engineering codes -Assist with structural risk assessments and implement corrective actions where required 4. Value Engineering & Optimization -Support value engineering initiatives and recommend practical structural solutions to improve project efficiency and cost effectiveness -Provide recommendations for construction methodologies and technical enhancements where applicable 5. Coordination & Reporting -Participate in project meetings with stakeholders and consultants -Provide regular technical reports and project updates to management -Coordinate effectively with project teams to ensure timely issue resolution and project continuity</p><p>-Bachelor’s Degree in Civil Engineering, Structural Engineering, or related field -Minimum 5–10 years of experience in structural engineering within high-rise building construction projects -Strong experience in reinforced concrete, steel structures, and tower developments (G+12 and above) -UAE project experience is highly preferred -Strong understanding of structural analysis, engineering principles, and construction methodologies -Familiarity with Dubai Municipality regulations, UAE building codes, and international standards -Proficiency in ETABS, SAFE, STAAD Pro, AutoCAD, and Revit is highly preferred -DM Certified Engineer (Unlimited Floors) is highly preferred or considered an advantage</p>

About Microavia Microavia is a Dubai-based technology company developing advanced autonomous systems and drone solutions for commercial and government applications. As we continue to develop our technology and expand our product portfolio, we are looking for an experienced Chief Technology Officer (CTO) to take ownership of Microavia’s technology strategy, engineering organization, and product development. The Role The CTO will be responsible for defining and executing Microavia’s technology vision and ensuring that our engineering capabilities support the company’s commercial and strategic objectives. This is a senior leadership role combining technology strategy, product development, engineering leadership, and end-to-end project ownership. We are looking for someone who can operate at both strategic and technical levels — setting the direction while remaining close enough to the engineering organization and products to drive execution.<br>Key Responsibilities Technology Strategy & Leadership Define and execute Microavia’s technology strategy, architecture, and long-term roadmap. Translate business and customer requirements into clear technology and product priorities. Identify new technologies and development opportunities that strengthen our products and competitive position. Advise the CEO and executive team on technology-related investments, priorities, risks, and opportunities. Product Development & Engineering Own the end-to-end development lifecycle of Microavia’s technology and products, from concept and architecture through development, testing, deployment, and continuous improvement. Ensure engineering solutions are robust, scalable, reliable, and aligned with customer and market requirements. Establish strong engineering and development processes while maintaining the speed and flexibility required in a growing technology company. Maintain high standards for product performance, quality, reliability, and technical documentation. Technology Project Management Take ownership of technology projects from planning and resource allocation through execution and delivery. Establish project scope, milestones, technical requirements, timelines, and responsibilities. Coordinate multidisciplinary engineering teams and other internal stakeholders to ensure successful delivery. Proactively identify technical and project risks and implement appropriate mitigation measures. Ensure projects are delivered according to agreed quality standards, budgets, and timelines. Engineering Team Leadership Lead, mentor, and develop Microavia’s engineering and technology teams. Establish clear responsibilities, objectives, and performance expectations. Build a culture of accountability, technical excellence, collaboration, and continuous improvement. Support the recruitment and development of strong technical talent as the organization grows. R&D and Innovation Lead research and development initiatives in autonomous systems and drone technologies. Evaluate emerging technologies and their potential application within Microavia’s products. Encourage rapid experimentation, prototyping, and validation of new technical concepts. Develop relationships with technology partners, research institutions, and other external experts where relevant. Technology Operations, Quality & Compliance Ensure the company’s technology infrastructure and engineering processes support security, reliability, scalability, and operational efficiency. Ensure technical development and products comply with applicable UAE and international regulatory requirements. Continuously improve engineering efficiency, quality control, and cost effectiveness. Customers & Stakeholders Represent the technology function in discussions with key customers, partners, and other stakeholders. Support complex customer engagements by translating operational requirements into viable technical solutions. Present technology strategy, development progress, risks, and key decisions to executive leadership and other stakeholders.<br>What We Are Looking For Bachelor’s or Master’s degree in Engineering, Computer Science, Robotics, or a related technical discipline.5+ years of experience in senior technology or engineering leadership roles, ideally within robotics, autonomous systems, UAV/drone technology, aerospace, or another complex hardware/software environment. Strong experience managing the full product development lifecycle and delivering complex technology projects. Solid understanding of system architecture and multidisciplinary engineering environments involving hardware, software, electronics, embedded systems, and/or autonomous technologies. Proven ability to lead and develop high-performing engineering teams. Strong project management capabilities; PMP or equivalent certification is an advantage. Excellent communication skills and the ability to translate complex technical topics into clear business decisions. Experience working with customers and senior stakeholders on technically complex projects. Strategic mindset combined with a hands-on, execution-oriented leadership style. Experience operating in a fast-growing or entrepreneurial technology environment is highly valued.<br>Why Microavia This role offers the opportunity to take genuine ownership of the technology function within a highly specialized technology company. The successful candidate will have a direct impact on Microavia’s technology roadmap, engineering organization, product development, and future generation of autonomous systems, working closely with the CEO and leadership team from our Dubai headquarters.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Plan, coordinate and monitor the implementation of the Turnaround activities from initiation phase to close-out phase to achieve the Turnaround’ milestones, KPIs and execution criteria.Contribute to ensure full and proper implementation of the Turnaround from the preparation and contracting of the Turnaround until close-out phase of the Turnaround project, through which the job holder is liaising with internal and external stake holders to achieve the Turnaround objectives.</p><br><br><br>Job Specific Accountabilities <br><p><strong>Turnaround Planning</strong><br>•&nbsp;&nbsp; &nbsp;Review the work scope for identified equipment to concur in preparation for the requirements of turnaround by Original Equipment Manufacturer or Vendor.<br>•&nbsp;&nbsp; &nbsp;In cooperation with the technical stakeholder of the equipment, review the alternatives, for the equipment which are considered for turnaround, to eliminate the risks.<br>•&nbsp;&nbsp; &nbsp;Participate in the preparation of Turnaround budget for the area of responsibility to ensure planned and effective spending.<br>•&nbsp;&nbsp; &nbsp;Prepare the Technical Objectives for each equipment ensure effective implementation and monitoring to achieve the corporate goals set for the Turnaround.<br>•&nbsp;&nbsp; &nbsp;Develop the process path of the Turnaround to ensure proper planning of the turnaround activities.<br>•&nbsp;&nbsp; &nbsp;In preparation for the Contract Execution Criteria (i.e. Quality, HSE), contact the focal points in each function to prepare their part criteria within the plan to communicate it to the vendor prior to Turnaround.<br><strong>Turnaround Contracting</strong><br>•&nbsp;&nbsp; &nbsp;Prepare the technical part of the Turnaround-Contracting to ensure meeting the technical requirements for the related plant.<br>•&nbsp;&nbsp; &nbsp;Prepare the scope of service requirements for Turnaround Contract in preparation for contracting stage, and to ensure full details are provided in advance.<br>•&nbsp;&nbsp; &nbsp;In cooperation with Procurement and related technical team, liaise for selection, assessment and screening of the competent contractor that meet the technical bidding.<br><strong>Turnaround Execution’ Monitoring</strong><br>•&nbsp;&nbsp; &nbsp;Supervise and report the activity execution by the contractors to ensure meeting the technical specifications for each, in line with the turnaround plan.<br>•&nbsp;&nbsp; &nbsp;Review and solicit with the Engineering-Contracting Team for the Turnaround Project close-out process to report the contracts closing and project reconciliation<br><strong>Communication &amp; Coordination</strong><br>•&nbsp;&nbsp; &nbsp;Share turnaround experiences from other OPCOs and industry with the concerned party, to upgrade the quality or efficiency of the turnaround activity in accordance with the best practices and technologies in the market.<br>•&nbsp;&nbsp; &nbsp;Monitor the actions implementation arising out of audit recommendations for Maintenance Execution - Turnaround department conducted by internal and external networks at various phase.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Initiates Post Turnaround Lessons learnt analysis and implementation of approved actions for future Turnaround’s.<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Degree in Industrial Engineering, Mechanical Engineering, or any Technical Qualifications.</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>5 or more years of experience, including at least 2 -3 years working experience in technical projects or maintenance</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

<br><p><strong>Senior Talent Acquisition Specialist – Oil & Gas / EPC</strong></p><br><p><strong>Roles & Responsibilities</strong></p><ul><li><p>Lead <strong>end-to-end recruitment</strong> for Oil & Gas, EPC, Engineering, Construction, Refinery, Petrochemical, and Energy projects.</p></li><li><p>Must be <strong>technically sound in Oil & Gas</strong> and able to understand technical JDs, engineering disciplines, project scopes, and industry terminology.</p></li><li><p>Recruit across <strong>Engineering, Construction, Commissioning, Operations & Maintenance, QA/QC, HSE, Planning, and skilled technical manpower</strong>.</p></li><li><p>Strong understanding of <strong>Mechanical, Piping, Electrical, Instrumentation & Control, Civil/Structural, Process, HSE, and QA/QC</strong> disciplines.</p></li><li><p><strong>Technically screen and assess CVs</strong> against project requirements, ensuring candidates have relevant Oil & Gas/EPC experience, qualifications, certifications, and project exposure.</p></li><li><p>Ability to distinguish <strong>relevant Oil & Gas experience from general engineering/construction experience</strong> before candidate submission.</p></li><li><p>Handle recruitment for <strong>EPC projects, upstream/downstream, refinery, petrochemical, shutdown/turnaround, maintenance, and commissioning</strong> requirements.</p></li><li><p>Source candidates through <strong>LinkedIn, Boolean search, job portals, databases, referrals, headhunting, and international recruitment channels</strong>.</p></li><li><p>Manage client interviews, selections, offers, mobilization, and joining while meeting agreed recruitment timelines.</p></li><li><p>Maintain strong technical talent pools and provide accurate recruitment updates to management and clients..</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ol><li><p><strong>Bachelor’s degree in Engineering or a related field is highly preferred.</strong></p></li><li><p><strong>10+ years of recruitment experience</strong>, with strong hands-on experience in <strong>Oil & Gas, EPC, Engineering, and Construction recruitment</strong>.</p></li><li><p>Proven ability to <strong>understand technical requirements and independently evaluate technical CVs</strong>.</p></li><li><p>Strong knowledge of <strong>Oil & Gas engineering disciplines, project environments, and technical manpower requirements</strong>.</p></li><li><p>UAE/GCC Oil & Gas recruitment experience is preferred.</p></li><li><p>Experience with <strong>ADNOC or other major Oil & Gas clients/projects</strong> will be an advantage.</p></li><li><p>Strong sourcing, interviewing, negotiation, coordination, and stakeholder-management skills.</p></li><li><p><strong>Engineering/technical background combined with hands-on Oil & Gas recruitment experience is highly preferred.</strong></p></li></ol>

<ul><li><p>Perform civil and structural analysis and design activities for Oil & Gas facilities.</p></li><li><p>Develop and review structural design calculations, engineering analyses and associated technical documentation.</p></li><li><p>Carry out structural modelling, analysis and design using <strong>STAADPro and MAT3D</strong>.</p></li><li><p>Apply relevant <strong>American design codes and standards</strong>, including <strong>AISC and ACI</strong>, in engineering design activities.</p></li><li><p>Ensure designs comply with applicable <strong>TOTAL GS (General Specification)</strong> requirements.</p></li><li><p>Review civil/structural engineering drawings, calculations and design deliverables for technical accuracy and compliance.</p></li><li><p>Provide technical input and engineering solutions for structural design issues arising during project execution.</p></li><li><p>Coordinate civil/structural engineering interfaces with other engineering disciplines.</p></li><li><p>Participate in interdisciplinary design reviews and technical coordination activities.</p></li><li><p>Identify design discrepancies, technical risks and potential engineering issues and recommend appropriate solutions.</p></li><li><p>Support technical queries, design clarifications and engineering changes relating to civil and structural works.</p></li><li><p>Ensure engineering deliverables are completed in accordance with project requirements, schedules and applicable standards.</p></li><li><p>Maintain appropriate engineering documentation and design records.</p></li><li><p>Support the engineering/project team as required throughout the assignment.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in <strong>Civil Engineering, Structural Engineering or a relevant engineering discipline</strong>.</p></li><li><p>Minimum <strong>12+ years of relevant professional experience</strong>.</p></li><li><p>Extensive structural design experience specifically within the <strong>Oil & Gas industry</strong>.</p></li><li><p>Demonstrable experience working on major Oil & Gas, EPC/EPCC or similar engineering projects is highly desirable.</p></li><li><p>Strong experience in civil and structural engineering design and analysis.</p></li><li><p>The candidate should demonstrate strong competency in:</p><ul><li><p><strong>STAADPro</strong></p></li><li><p><strong>MAT3D</strong></p></li><li><p>Structural analysis and design</p></li><li><p>Steel structure design</p></li><li><p>Reinforced concrete design</p></li><li><p><strong>AISC</strong> requirements</p></li><li><p><strong>ACI</strong> requirements</p></li><li><p>Applicable American engineering/design standards</p></li><li><p><strong>TOTAL GS (General Specification)</strong> requirements</p></li><li><p>Engineering calculations and technical documentation</p></li><li><p>Design and drawing review</p></li><li><p>Multidisciplinary engineering coordination</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Sofitel Al Hamra Beach Resort</p><br><br>Job Description<br><br><p>We are seeking a detail-oriented and analytical Intern - Engineering to join our engineering team in Ras Al-Khaimah, United Arab Emirates. This internship offers an excellent opportunity to gain hands-on experience in a professional engineering environment while supporting our team on meaningful projects. You will work alongside experienced engineers, develop technical skills, and contribute to the design, analysis, and optimization of engineering solutions.</p><br><ul><li>Assist senior engineers in the design, development, and testing of engineering projects and systems</li><li>Conduct technical analysis, research, and troubleshooting to support ongoing initiatives</li><li>Participate in quality assurance and testing activities to ensure project specifications are met</li><li>Document technical specifications, design changes, and project progress in an organized manner</li><li>Collaborate with cross-functional teams to gather requirements and provide technical support</li><li>Support the maintenance, optimization, and improvement of engineering systems and processes</li><li>Contribute to problem-solving activities and provide recommendations for process improvements</li><li>Utilize engineering software and tools to create models, simulations, and technical documentation</li></ul><br>Qualifications<br><br><ul><li>Strong analytical and technical problem-solving skills</li><li>Proficiency in engineering software and CAD tools (such as AutoCAD, SOLIDWORKS, or similar platforms)</li><li>Excellent attention to detail and organizational abilities</li><li>Effective communication and interpersonal skills</li><li>Time management skills and ability to work efficiently on multiple tasks</li><li>Familiarity with engineering principles and industry standards</li><li>Experience with project documentation and technical writing</li><li>Preferred: Prior internship, co-op, or project experience in an engineering environment</li><li>Preferred: Knowledge of specific engineering disciplines (mechanical, electrical, civil, or software engineering)</li><li>Preferred: Basic understanding of project management concepts</li><li>Preferred: Programming or scripting experience</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Senior Medical Laboratory Technologist - Genomics provides technical oversight and performs high-complexity molecular and genomic testing within the laboratory's approved scope of services. The role is responsible for ensuring the accuracy, quality, and timeliness of genomic diagnostic testing through oversight of pre-analytical, analytical, and post-analytical processes, including specimen assessment, nucleic acid extraction, assay preparation, sequencing workflows, quality control, technical review, troubleshooting, and workflow coordination.</p><br><p>The position serves as a technical resource for laboratory staff and supports competency assessment, staff development, method verification and validation, quality management activities, and continuous process improvement initiatives. The Senior Technologist ensures compliance with American Hospital Dubai policies and procedures, Dubai Health Authority (DHA) regulations, College of American Pathologists (CAP) accreditation requirements, Joint Commission International (JCI) standards, and applicable genomic data privacy, security, and governance regulations.</p><br><br>Responsibilities:<br><p><strong>Technical Operations</strong></p><br><ul> <li>Performs and coordinates high-complexity molecular and genomic testing within the approved test menu, including nucleic acid extraction, PCR/qPCR, sequencing workflows, library preparation, and other validated molecular techniques as applicable.</li> <li>Reviews specimen suitability, patient and sample identification, collection requirements, transport, storage, chain of custody, and pre-analytical variables, ensuring complete traceability and timely escalation of unsuitable or discrepant specimens.</li> <li>Oversees daily technical workflow and prioritization within the Genomics Lab, monitors turnaround times and pending work, and provides technical guidance to technologists to maintain safe, accurate, and efficient service delivery.</li> <li>Operates, maintains, and troubleshoots genomic laboratory equipment and software platforms, coordinating preventive maintenance, service support, reagent readiness, environmental controls, and downtime contingencies with relevant teams and vendors.</li> <li>Supports verification and validation of new assays, instruments, reagents, software, and workflow changes, including accuracy, precision, analytical sensitivity/specificity, reportable range, reference materials, contamination controls, and required technical documentation.</li> <li>Reviews analytical data and test results within authorized professional scope, identifies quality or technical concerns, and escalates significant, discordant, or clinically relevant findings to the responsible laboratory specialist, pathologist, or authorized reporting professional.</li> <li>Leads staff orientation, technical training, competency assessment, procedure updates, and bench-level coaching; supports audits, CAP/DHA/JCI accreditation readiness, non-conformity investigations, CAPA, and continuous quality improvement initiatives.</li> <li>Provide technical guidance, mentoring, and support to students.</li></ul><p><strong>Quality Assurance and Compliance</strong></p><br><ul> <li>Performs and evaluates quality control, calibration, calibration verification, proficiency testing, external quality assessment activities, and other quality indicators to ensure analytical reliability and accuracy.</li> <li>Investigates quality control failures, instrument performance issues, and non-conforming events, implementing corrective actions and documenting outcomes in accordance with laboratory procedures.</li> <li>Ensures compliance with patient identification, traceability, confidentiality, data integrity, and document control requirements.</li> <li>Maintains accurate genomic laboratory records and data within the LIS and approved systems, ensuring confidentiality, controlled access, secure handling, auditability, retention, and compliance with applicable human genetic and genomic data-governance requirements.</li> <li>Collaborates effectively with pathologists, physicians, nursing staff, phlebotomists, laboratory colleagues, referral laboratories, and other stakeholders to ensure high-quality laboratory services and optimal patient outcomes. Provides technical support and guidance to laboratory colleagues within area of expertise.</li> <li>Participates in continuing education, professional development, competency programs, and departmental training initiatives to maintain current knowledge and technical proficiency. Promotes a culture of safety, quality, teamwork, innovation, and patient-centered care.</li> <li>Participates in internal audits, quality improvement initiatives, competency assessments, accreditation activities, and regulatory inspections to maintain continuous compliance with CAP, DHA, JCI, and other applicable standards.</li> <li>Supports the investigation, documentation, and resolution of incidents, non-conformities, corrective actions, preventive actions, and risk management activities.</li></ul><br>Qualifications:<br><ul> <li>Bachelor’s Degree in Medical Laboratory Science, Medical Laboratory Technology, Molecular Biology, Genetics, Biomedical Science, or a related recognized discipline.</li> <li>Current professional registration in the home country where applicable and valid Dubai Health Authority (DHA) License/Eligibility appropriate to the professional title and approved scope of practice.</li> <li>Advanced knowledge of molecular diagnostics and genomic laboratory workflows, including nucleic acid extraction, PCR-based methods, sequencing, quality control, contamination prevention, and analytical troubleshooting.</li> <li>Knowledge of DHA Standards for Genomic Services, DHA Molecular and Genomics Testing Laboratory requirements, CAP laboratory accreditation requirements, JCI standards, and ISO 15189 quality principles is preferred.</li> <li>Working knowledge of Laboratory Information Systems, genomic laboratory software, sequencing platforms, data transfer workflows, and applicable bioinformatics interfaces is preferred.</li> <li>Strong leadership, analytical, troubleshooting, documentation, communication, and organizational skills with exceptional attention to patient identification, traceability, confidentiality, and data integrity.</li></ul><p><strong>PROFESSIONAL EXPERIENCE:</strong></p><br><ul> <li>Minimum of five (5) years of recent experience in Medical Laboratory Science or Molecular Diagnostics, with at least three (3) years of hands-on experience in a molecular or genomics laboratory.</li> <li>Demonstrated experience with next-generation sequencing and/or other high-complexity molecular platforms, including sample preparation, quality assessment, instrument operation, troubleshooting, and technical review.</li> <li>Experience in assay validation/verification, proficiency testing, quality control review, non-conformity investigation, corrective action, and accreditation preparation is required.</li> <li>Previous experience providing technical supervision, staff training, competency assessment, or workflow coordination in a molecular/genomics laboratory is highly preferred.</li> <li>Experience within a tertiary, CAP-accredited, JCI-accredited, or similarly regulated laboratory environment is highly preferred.</li></ul> </div>

Fashion Designer Responsibilities:· Research trends, fabrics, and inspirations for new collections.· Sketch and develop original concepts.· Create moodboard.· Select color palettes, trims, and materials.· Create tech packs and detailed specifications for sample making and production.· Create artwork and beadwork for sampling and production.· Work closely with production and sales teams.· Stay updated with fashion trends and consumer behavior.· Assist in creating and modifying basic patterns for RTW collections under guidance.· Participate in fittings and assist with pattern adjustments based on technical and design feedback.· Maintain organized records of patterns, beadwork materials, technical notes, and related documentation.· Assist in preparing technical sheets and specifications for production.· Pattern development· Create grading for production.· Production patching and artwork<br>Fashion Designer Requirements:· Bachelor’s degree in design · 2+ years design experience.· Strong drawing and illustration Skills ( computer sketching- hand sketching – flat sketching- computer art work ) · Understanding of fabrics, sewing techniques, and garment construction· Creativity and a strong sense of aesthetic and trends· Knowledge of design software like Procreate, Adobe illustrator and Photoshop or similar· Communication and teamwork skills.· Time management and attention to detail· Excellent sense of style and color.· Outstanding communication skills, both written and verbal.· Ability to meet multiple deadlines· Has a wide knowledge of Ready to Wear line.· Fluent in English.

Company Description SS TECHNICAL SERVICES is a specialized industrial services company operating in the United Arab Emirates, supporting construction, fabrication, and engineering projects across multiple sectors. The organization focuses on delivering reliable technical workmanship, particularly in metal fabrication and installation for industrial and commercial clients. SS TECHNICAL SERVICES emphasizes safe working practices, adherence to project specifications, and timely delivery of high-quality structures. Team members work in a collaborative environment with opportunities to develop practical skills and grow within the industrial trades. The company values professionalism, accountability, and continuous improvement in all field and workshop operations.<br>Role Description The Pipe Structure Fabricator is a full-time, on-site role based in the United Arab Emirates, working primarily in workshops and project sites. In this role, the fabricator reads and interprets engineering drawings and isometric sketches, measures and marks materials, and cuts, bends, and shapes pipes and structural components using appropriate tools and machinery. Day-to-day tasks include fitting, tack welding, and preparing pipe assemblies and support structures, ensuring alignment, tolerance, and quality standards are met before final welding. The fabricator coordinates with welders, supervisors, and other trades to complete fabrication and installation tasks safely and efficiently, following company procedures and site safety regulations. The role may also involve assisting with material handling, basic maintenance of tools and equipment, and reporting any issues that could affect quality, schedule, or safety.<br>Qualifications<br> <br>Ability to read and interpret technical drawings, isometrics, and fabrication sketches for pipes and structural supports. Hands-on experience in measuring, cutting, beveling, and preparing pipes and steel sections using hand tools and power tools. Skilled in fitting and assembling pipe structures, including alignment, marking, and preparation for welding. Knowledge of basic welding principles and collaboration with welders to complete structural fabrication work. Understanding of industrial safety standards, use of personal protective equipment, and safe handling of materials and machinery. Previous experience in pipe fabrication, structural fabrication, or related industrial trades, preferably in construction, oil and gas, or engineering projects. Ability to work in on-site conditions, including workshops and field locations, and to perform physically demanding tasks such as lifting, standing, and working in varied positions. Strong attention to detail, problem-solving skills, and ability to follow instructions and project specifications accurately. Basic communication skills in English and ability to work effectively within a diverse team. Relevant vocational training or certification in fabrication, pipe fitting, or a related technical discipline is an advantage.

<p><strong>Job Title: Talent Acquisition Specialist Location: Sharjah / Dubai, United Arab Emirates</strong></p><p><strong>Industry: Construction</strong></p><p><strong>About the Role</strong></p><p><br></p><p>We are looking for a proactive and experienced <strong>Talent Acquisition Specialist</strong> to join our team. The ideal candidate will have a strong background in recruitment within the construction industry and a proven ability to attract and hire top talent across technical and non-technical roles.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Manage the full recruitment cycle, including sourcing, screening, interviewing, and onboarding candidates.</p></li><li><p>Develop and execute effective sourcing strategies to attract qualified candidates, especially for construction roles (engineering, site, and technical positions).</p></li><li><p>Utilize job portals, LinkedIn, and headhunting techniques to identify and engage top talent.</p></li><li><p>Conduct initial interviews and assess candidates based on technical and behavioral competencies.</p></li><li><p>Maintain and update the applicant tracking system and candidate database.</p></li><li><p>Ensure a positive candidate experience throughout the recruitment process.</p></li><li><p>Support employer branding initiatives and recruitment campaigns.</p></li><li><p>Prepare job descriptions and job postings aligned with business requirements.</p></li><li><p>Assist in onboarding processes and ensure smooth candidate integration.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>5–7 years of experience in Talent Acquisition.</p></li><li><p>Experience working within the <strong>construction industry</strong> is a must.</p></li><li><p>Bachelor’s degree in Human Resources, Business Administration, or a related field.</p></li><li><p>Arabic speaker is highly preferred.</p></li><li><p>Proficiency in using recruitment platforms and tools (LinkedIn, job boards, ATS systems).</p></li><li><p>Strong experience in sourcing and hiring for technical roles (engineers, site staff, etc.).</p></li></ul>

Urgent requirement for Sales & Estimation Engineer in Oil & Gas Domain is required for our client in Dubai ,UAE<br><br>Technical expertise in upstream oil & gas equipment, combined with proven commercial acumen in cost estimation and bid preparation. Relevant experience in sales, estimation, or application engineering within Oil & Gas.--Must<br><br>Knowledge in Wellhead – Christmas Tree Mandatory.--Must<br><br>Knowledge in Costing from Manufacturing to Delivery is Mandatory. Exposure on API 6A valve products.--Must Proven ability to prepare accurate cost estimates and competitive bids ,contract negotiation and proposal compilation.---Must<br><br>Job Purpose The Sales & Estimation Engineer will drive business growth by managing the complete sales cycle — from lead generation to proposal submission — with a focus on surface wellhead systems and API 6A valve products. This role requires strong t Key Responsibilities<br><br>Sales & Business Development Develop and execute sales strategies for surface wellhead equipment (casing heads, tubing heads, christmas trees) and API 6A valves (gate, check, plug valves). Identify new business opportunities with OEMs, operators, and drilling contractors. Deliver technical sales presentations and product demonstrations. Build and maintain strong client relationships as the primary technical and commercial contact. Technical Estimation Analyze RFQs, specifications, and technical drawings to define scope of work. Prepare accurate cost estimates covering materials, CNC machining, welding, coating (thermal spray, chrome plating), testing (hydrostatic pressure), and labor. Ensure compliance with API Spec 6A and customer-specific requirements. Compile competitive technical and commercial proposals showcasing company capabilities. Engineering & Support Collaborate with engineering, manufacturing, and QC teams to ensure feasibility and accuracy. Provide post-sales technical support and resolve client queries. Stay updated on market trends, competitor activities, and advancements in wellhead technology. HSE Compliance Promote a strong safety culture and conduct hazard identification & risk assessments. Ensure adherence to QHSE objectives and IMS management system. Report and investigate incidents, participate in emergency response programs.<br>Required Qualifications & Skills<br><br>Education: Bachelor’s degree in Mechanical, Petroleum, or Industrial Engineering. Experience: Minimum 5+ years in sales, estimation, or application engineering within Oil & Gas. Technical Expertise:Strong knowledge of surface wellhead systems and components (hangers, connectors, block valves). In-depth understanding of API Specification 6A (pressure ratings, material classes, temperature ratings, PSLs). Familiarity with manufacturing/reconditioning processes: CNC machining, welding, NDT, pressure testing. Commercial Skills: Proven track record in cost estimation, bid preparation, and contract negotiation. Soft Skills: Excellent communication, presentation, and interpersonal skills. Self-starter, able to work independently and in teams. Travel: Willingness to travel regionally and internationally for client meetings and sales support Skills: sales,manufacturing,gas,oil

<strong>Job Description<br><br></strong><strong>Job Title: Pre-Sales Consultant –Data Protection, Backup &amp; Disaster Recovery <br><br></strong><strong>Location: Onsite in Dubai, UAE<br><br></strong><strong>Role Summary<br><br></strong>We are looking for a technically strong Pre-Sales Consultant to own the technical side of our data protection and disaster recovery deals. In this role, you are the bridge between complex infrastructure and customer confidence. You will work alongside our Account Managers to discover customer pain points, design Backup/DR solutions, run Proof-of-Concepts (POCs), and present your designs to IT teams and management.<br><br>You won’t just sell software—you will architect resilience. If you are someone with strong data protection fundamentals, certified and who enjoys talking to customers, solving storage puzzles, and closing technical deals, this is your next step up.<br><br><strong>Key Responsibilities<br><br></strong><strong>Backup &amp; DR Architecture<br><br></strong><ul><li>Lead technical discovery calls to assess customer backup, storage, and recovery requirements.</li><li>Design end-to-end data protection solutions aligned with RTO/RPO, retention policies, and compliance needs.</li><li>Create technical architecture diagrams, Bills of Materials (BoMs), and deployment roadmaps.</li><li>Design protection strategies across physical, virtual (VMware/Hyper-V), and hybrid-cloud environments.</li><li>Assist in designing replication, failover, and recovery testing workflows.<br><br></li></ul><strong>Veeam Solution Expertise<br><br></strong><ul><li>Architect solutions using Veeam Backup &amp; Replication, Veeam Data Platform, and VBO365.</li><li>Design and size Veeam proxy/repository architectures, Scale-Out Backup Repositories (SOBR), and backup copy jobs.</li><li>Configure and present live demonstrations showcasing backup, recovery, and replication workflows.</li><li>Lead Proof-of-Concept (POC) engagements to prove the technical fit of Veeam solutions.<br><br></li></ul><strong>Cyber Resilience &amp; Ransomware Protection<br><br></strong><ul><li>Design modern backup architectures.</li><li>Architect immutable storage, hardened repositories, and air-gapped recovery environments.</li><li>Advise customers on backup security best practices (MFA, privileged access, segmentation).</li><li>Demonstrate how to recover cleanly from a ransomware attack using isolated recovery environments.<br><br></li></ul><strong>Storage &amp; Infrastructure Integration<br><br></strong><ul><li>Work with customer storage teams to integrate Veeam with SAN, NAS, and Object Storage (S3, Azure Blob, MinIO).</li><li>Validate storage performance (IOPS, throughput, latency) and perform capacity planning based on data growth and change rates.</li><li>Recommend purpose-built backup appliances (e.g., Data Domain, StoreOnce) and design data transfer optimization strategies.<br><br></li></ul><strong>Cloud &amp; Hybrid Workloads<br><br></strong><ul><li>Design backup and DR strategies for workloads running on AWS, Azure, or Google Cloud.</li><li>Assist customers with cloud migration and workload mobility using Veeam replication and restore features.</li><li>Design protection for Microsoft 365 (Exchange, Teams, SharePoint, OneDrive) and ensure compliance with data sovereignty rules.<br><br></li></ul><strong>Pre-Sales Engagement &amp; Handoff<br><br></strong><ul><li>Deliver technical presentations and solution overviews to customer IT teams and management.</li><li>Develop RFP/RFQ responses and technical proposal documents.</li><li>Handle technical objections and articulate Veeam's advantages over competitors.</li><li>Collaborate with Professional Services teams to ensure a smooth handoff from design to implementation.</li><li>Participate in customer kickoff meetings to clarify architecture assumptions.<br><br></li></ul><strong>Total Experience<br><br></strong><strong>Required Qualifications &amp; Experience<br><br></strong><ul><li>6 - 8 years of experience in backup, disaster recovery, storage, or infrastructure engineering.</li><li>Minimum 2–3 years of hands-on experience designing or deploying Veeam<br><br></li></ul><strong>Backup &amp; Replication.<br><br></strong><strong>Core Technical Skills<br><br></strong><ul><li>Deep understanding of enterprise backup methodologies.</li><li>Solid knowledge of VMware vSphere and/or Microsoft Hyper-V architectures.</li><li>Strong understanding of Storage technologies: SAN/NAS, Object Storage (S3), and deduplication appliances.</li><li>Practical experience designing immutable/ransomware-resilient backup architectures.</li><li>Strong working knowledge in at least one major cloud platform (AWS, Azure, or GCP) for backup/DR workloads.<br><br></li></ul><strong>Pre-Sales &amp; Soft Skills<br><br></strong><ul><li>Proven ability to run technical discovery workshops and gather customer requirements.</li><li>Experience delivering product demonstrations and Proof-of-Concepts.</li><li>Excellent verbal and written communication; ability to explain technical concepts to non-technical audiences.</li><li>Comfortable presenting to IT Managers, Infrastructure Leads, and Directors.</li><li>Veeam Certification (Strongly Preferred)</li><li>VMCE (Veeam Certified Engineer) is strongly preferred and will be a major differentiator during the selection process.</li><li>Candidates actively working towards VMCE with solid practical experience will also be considered.<br><br></li></ul><strong>Preferred Qualifications (Nice-to-Haves)<br><br></strong><ul><li>Experience with Commvault, Rubrik, Cohesity, or Dell PowerProtect (multivendor exposure is a plus).</li><li>Experience protecting Microsoft 365 (VBO365).</li><li>Experience with Kasten by Veeam for Kubernetes protection.</li><li>Basic scripting skills (PowerShell or Python) to automate reporting/demos.</li><li>Experience working with reseller partners or channel environments.</li><li>Experience in the Middle East, GCC, or APAC markets is a bonus.<br><br></li></ul><strong>Key Competencies<br><br></strong><strong>Technical<br><br></strong><ul><li>Veeam Architecture &amp; Sizing</li><li>Storage Integration (Block, File, Object)</li><li>Virtualization (VMware, Hyper-V)</li><li>Ransomware Recovery &amp; Immutability</li><li>Cloud Backup (AWS/Azure/GCP)</li><li>M365 Backup<br><br></li></ul><strong>Professional<br><br></strong><ul><li>Consultative Discovery</li><li>Solution Design &amp; Documentation</li><li>Customer Presentation &amp; Demo Skills</li><li>Technical Objection Handling</li><li>Collaborative Team Player</li></ul>

Senior Site Engineer Location: UAE Job Type: Full-Time We are looking for an experienced and technically skilled Senior Site Engineer to lead the end-to-end deployment and commissioning of our PV cleaning robot systems at project sites. The ideal candidate will have strong experience in engineering installation, robotic systems, troubleshooting, commissioning, and client coordination. Key Responsibilities Lead and manage the complete on-site deployment of PV cleaning robot systems, from site assessment and planning to installation, commissioning, client training, and final handover. Provide technical guidance and supervision to installation teams, ensuring all systems are installed according to engineering specifications and quality standards. Perform functional testing, system calibration, and commissioning to ensure optimal robot performance. Configure and commission SCADA systems, ensuring seamless communication between robots, remote monitoring platforms, and client networks. Oversee the installation of rails, charging stations, communication modules, and other critical engineering components. Manage engineering materials and ensure proper inventory handling and quality control at project sites. Diagnose and resolve complex mechanical, electrical, software, navigation, and connectivity issues to minimize system downtime. Act as the primary technical point of contact for clients and stakeholders on-site. Conduct system demonstrations and provide operational and maintenance training to clients and end-users. Prepare field service reports, installation documentation, and technical issue logs. Provide structured technical feedback to engineering and product development teams to support continuous product improvement. Requirements Bachelor's Degree in Engineering in related field.5 years of proven experience in site engineering, system installation, commissioning, or technical project deployment. Strong knowledge of mechanical, electrical, and automated/robotic systems. Experience with SCADA systems, industrial communication, or remote monitoring platforms is preferred. Strong troubleshooting and problem-solving skills. Experience managing installation teams and working independently at project sites. Excellent communication and client-facing skills. Willingness to travel and work at project sites as required.

<p>Job Summary<br /> We are a Dubai-based Office Automation service organization seeking a highly organized and customer-focused Technical Service Coordinator to oversee daily technical service operations and ensure the efficient scheduling of field service technicians. The successful candidate will coordinate service activities, monitor maintenance schedules, communicate with customers and technical staff, and ensure all service requests are completed on time and to the highest quality standards. The role also includes coordinating spare parts, maintaining accurate service records, and supporting the delivery of exceptional customer service.<br /> Duties and Responsibilities<br /> • Prepare and manage daily, weekly, and monthly technician schedules.<br /> • Coordinate technician and service staff assignments based on workload, priority, and availability.<br /> • Receive, schedule, and monitor customer service requests.<br /> • Communicate with customers regarding service appointments, updates, and job completion.<br /> • Identify spare part numbers using service manuals and parts list drawings.<br /> • Ensure service activities are completed within established timelines.<br /> • Maintain accurate service records, schedules, and reports.<br /> • Monitor staff attendance and coordinate schedule changes when required.<br /> • Work closely with supervisors to optimize workforce utilization.<br /> • Resolve scheduling conflicts and respond promptly to urgent service requests.<br /> • Ensure compliance with company policies, health and safety regulations, and quality standards.<br /> • Prepare service reports and maintain documentation for management review.<br /> • Support continuous improvement initiatives to enhance service efficiency and customer satisfaction.<br /> Qualifications<br /> • Previous experience in service coordination, scheduling, or customer service is preferred.<br /> • Experience in the office automation industry is an advantage.<br /> • Strong organizational and time-management skills.<br /> • Excellent verbal and written communication skills in English.<br /> • Strong understanding of preventive and corrective maintenance procedures.<br /> • Ability to identify spare part numbers from technical manuals and exploded parts drawings.<br /> • Proficiency in Microsoft Office and service management or scheduling software.<br /> • Ability to prioritize multiple service requests and work effectively under pressure.<br /> • Strong problem-solving and analytical skills with excellent attention to detail.<br /> • Customer-focused with excellent interpersonal skills.<br /> How to Apply<br /> Interested candidates should submit their CV and cover letter to Jobs@citech.ae no later than 30-8-2026.</p>