Financial Analyst Jobs in UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Lifting Supervisor</b> in <b>Abu Dhabi, UAE</b>. Our client is seeking skilled, motivated professionals with strong experience in supervising lifting activities and maintaining safe lifting operations. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise day-to-day lifting and rigging activities at the assigned worksite.<br></li><li>Review lifting requirements and ensure lifting activities are carried out according to approved lifting plans and site procedures.<br></li><li>Verify cranes, lifting accessories, slings, shackles and related equipment are suitable for the intended lifting operation.<br></li><li>Coordinate crane operators, riggers, signalmen and other personnel involved in lifting activities.<br></li><li>Conduct pre-lift checks, toolbox discussions and task-specific risk assessments before lifting begins.<br></li><li>Monitor lifting operations continuously and stop work when unsafe conditions or deviations are identified.<br></li><li>Ensure lifting zones are properly barricaded and personnel remain clear of suspended loads.<br></li><li>Maintain lifting-operation records and report equipment defects, incidents or unsafe conditions to site management.<br></li></ul>Required Skills<br><b>Lifting Operations Supervision:</b> Ability to control lifting activities safely from preparation through completion.<br><br> <b>Lift Planning:</b> Ability to interpret lifting plans, load information and operational requirements.<br><br> <b>Rigging &amp; Slinging Knowledge:</b> Strong understanding of slings, shackles, lifting accessories and safe rigging practices.<br><br> <b>Lifting Equipment Inspection:</b> Ability to verify equipment condition, identification and suitability before use.<br><br> <b>Safety &amp; Risk Control:</b> Ability to identify lifting hazards and implement appropriate control measures.<br><br>Preferred Skills<br>Strong understanding of crane operating limitations and load-control principles.<br><br> Experience coordinating multidisciplinary lifting crews on industrial sites.<br><br> Familiarity with permit-to-work and site-specific lifting-control systems.<br><br>Work Experience Requirements<br><p>Minimum <b>5 years of experience</b> is required as provided in the requirement. Candidates should have practical exposure to supervising lifting, crane and rigging operations in a structured site environment. Specific industry experience was not stated.<br></p><br>Education<br><b>Minimum:</b> Typical — Diploma or technical qualification relevant to mechanical, industrial or lifting operations.<br><br> <b>Preferred:</b> Typical — Relevant lifting supervision or rigging certification.<br><br> <b>Additional:</b> Typical — Safety, lifting equipment inspection or crane/rigging-related certification.<br>Contact No-9786888866<br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job description <p><b>​Discover the Opportunity</b></p><br><p>We’re partnering with a leading financial services organisation in Abu Dhabi that is investing significantly in its AI and data capabilities.</p><br><p>This is a senior, hands-on position focused on transforming how data is governed, managed, and made available for AI and analytics across the organisation. You’ll own strategic data transformation initiatives while working across Data, AI, Technology, Architecture, and Governance teams.</p><br><p>The role is particularly focused on using AI to transform traditional data management, automating areas such as data quality, governance, lineage, and metadata management to enable AI initiatives to move into production faster and at greater scale.</p><br><p>​</p><br><p><b>Discover the Responsibilities</b></p><br><p>Define and deliver the organisation’s data transformation roadmap, ensuring data capabilities can support AI and analytics at scale.</p><br><p>Drive the adoption of modern data management practices across governance, data quality, lineage, metadata, master data, and data products.</p><br><p>Use AI, automation, and metadata-driven approaches to modernise traditionally manual data governance and quality processes.</p><br><p>Identify and remove data and organisational bottlenecks that impact the delivery of AI and analytics initiatives.</p><br><p>Establish scalable data transformation frameworks, standards, governance processes, and execution plans.</p><br><p>Partner closely with Data Science, Technology, Architecture, Governance, and business teams to improve enterprise-wide data maturity.</p><br><p>​</p><br><p><b>Discover the Requirements</b></p><br><ul><li><p>Significant experience leading complex data transformation programmes within large- scale enterprise environments.</p><br></li><li><p>Strong expertise across data governance, data quality, lineage, metadata management, master data management, and/or data products.</p><br></li><li><p>Deep understanding of modern data platforms, architectures, and enterprise data management.</p><br></li><li><p>Strong understanding of the data requirements underpinning AI and machine learning, including data quality, feature engineering, model governance, and scalable AI delivery.</p><br></li><li><p>​</p><br></li><li><p>Experience applying AI and machine learning to data management, such as automated lineage discovery, metadata extraction, or data quality assessment.</p><br></li><li><p>Strong leadership and stakeholder management skills, with the ability to influence across business and technology functions.</p><br></li><li><p>Bachelor’s or Master’s degree in Computer Science, Engineering, or a related technical discipline. </p><br></li></ul><p><b>Why Join?</b></p><br><ul><li><p>Take ownership of a major data transformation agenda within a highly ambitious AI environment.</p><br></li><li><p>Work at the intersection of Data, AI, Governance, and Technology.</p><br></li><li><p>Apply AI to fundamentally change how enterprise data is managed rather than simply implementing traditional governance processes .</p><br></li><li><p>Play a highly influential role in creating the data foundations required to scale enterprise AI.</p><br></li></ul><br> </div>

Role Description An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, troubleshooting, repairing, testing, and certifying aircraft, aircraft systems, components, and equipment to ensure safe, reliable, and airworthy operation. The role works closely with maintenance technicians, pilots, engineering teams, flight operations, manufacturers, suppliers, quality teams, and aviation authorities. Key responsibilities include performing scheduled and unscheduled aircraft maintenance, inspections, servicing, troubleshooting, repairs, modifications, and component replacement; conducting transit, daily, weekly, A-check, C-check, and other scheduled maintenance activities as applicable; inspecting aircraft structures, engines, landing gear, flight-control systems, hydraulic systems, pneumatic systems, fuel systems, electrical systems, avionics, communication systems, navigation systems, and other aircraft components; diagnosing mechanical, electrical, hydraulic, pneumatic, structural, and avionics faults using approved maintenance manuals, technical documentation, diagnostic equipment, and specialized tools; interpreting Aircraft Maintenance Manuals (AMM), Structural Repair Manuals (SRM), Illustrated Parts Catalogues (IPC), Wiring Diagram Manuals (WDM), Fault Isolation Manuals (FIM), Component Maintenance Manuals (CMM), service bulletins, airworthiness directives, and engineering instructions; performing functional tests, operational checks, inspections, troubleshooting, and system verification after maintenance activities; ensuring maintenance tasks are completed according to approved procedures, manufacturer requirements, engineering instructions, maintenance programs, and applicable aviation regulations; completing accurate maintenance records, technical logs, work cards, task cards, inspection reports, defect reports, and component documentation; identifying and reporting aircraft defects, technical discrepancies, safety concerns, and reliability issues; supporting defect rectification, troubleshooting, aircraft recovery, AOG situations, and urgent maintenance requirements; coordinating with maintenance control, flight operations, engineering, planning, logistics, quality assurance, and technical services teams; inspecting replacement parts, tools, equipment, and materials to ensure correct specifications, traceability, certification, and airworthiness requirements; performing aircraft system testing using approved test equipment and ground-support equipment; supporting aircraft modifications, upgrades, structural repairs, avionics installations, cabin modifications, and engineering changes where authorized; participating in reliability programs by monitoring recurring defects, component failures, technical trends, and maintenance performance; supporting root-cause analysis and corrective actions for recurring technical problems; maintaining tools, equipment, calibration records, maintenance areas, and technical resources; following aviation safety, occupational health, environmental, human-factors, and Foreign Object Debris (FOD) prevention procedures; supporting quality audits, regulatory inspections, safety investigations, and compliance activities; utilizing computerized maintenance-management systems, electronic technical logs, aircraft health-monitoring systems, predictive maintenance technologies, data analytics, and AI-assisted diagnostic tools where approved; monitoring manufacturer recommendations, technical publications, regulatory updates, service bulletins, and airworthiness requirements; and continuously improving aircraft safety, reliability, maintenance efficiency, operational readiness, and airworthiness standards. Qualifications Diploma or Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Aviation Maintenance, Mechanical Engineering, Avionics, or a related discipline. Relevant aircraft maintenance license or certification appropriate to the aircraft type and applicable aviation authority. Strong understanding of aircraft structures, propulsion, electrical systems, hydraulics, pneumatics, flight controls, avionics, fuel systems, landing gear, and aircraft maintenance practices. Ability to read and interpret AMM, SRM, IPC, FIM, CMM, WDM, engineering drawings, wiring diagrams, technical publications, and maintenance instructions. Strong troubleshooting, diagnostic, analytical, mechanical, electrical, and problem-solving skills. Knowledge of aviation maintenance regulations and standards applicable to the operating environment, such as ICAO, EASA, FAA, UK CAA, GCAA, or equivalent authorities. Understanding of aviation safety-management systems, human factors, risk management, quality assurance, FOD prevention, and maintenance safety. Familiarity with computerized maintenance-management systems and electronic technical-log platforms. Knowledge of aircraft health monitoring, predictive maintenance, condition-based maintenance, and aviation data analytics is advantageous. Ability to use aircraft maintenance tools, specialized test equipment, diagnostic equipment, and ground-support equipment. Strong technical documentation, reporting, communication, and record-keeping skills. Strong understanding of component traceability, certification, tooling control, calibration, and maintenance records. Ability to work effectively with engineers, technicians, pilots, maintenance control, operations, logistics, manufacturers, suppliers, and quality teams. Ability to work under time pressure while maintaining strict safety, quality, and regulatory standards. Relevant aircraft type ratings, engineering licenses, maintenance certifications, or aviation technical qualifications are highly advantageous. Strong commitment to aviation safety, airworthiness, technical accuracy, regulatory compliance, reliability, and continuous professional development.

<p>TROUVAY & CAUVIN is seeking a Sales Manager - Energy based in Abu Dhabi</p><p><br></p><p><strong><u>Job purpose</u></strong></p><p><br></p><p>With a strong focus on the Energy market, the Sales Manager is the cornerstone of client engagement and commercial success. From generating leads and nurturing client relationships to managing the full sales cycle — including sourcing, quoting, order processing, and after-sales support — you ensure seamless execution and sustained growth.</p><p><br></p><p><strong><u>Key Responsibilities</u></strong></p><p><br></p><ul><li><p><strong>Client Relationships</strong>: Actively promote the company's products in the assigned market by conducting regular client visits, generating inquiries, and building strong relationships to drive business growth. Manage the full sales cycle—from reviewing tenders and preparing quotations and offers to negotiating terms and processing orders through the ERP system—ensuring alignment with company strategy and maximising profitability.</p></li><li><p><strong>Inside coordination</strong>: coordinates internally by reporting market insights to the manager, preparing order reviews and margin calculations, liaising with local management during negotiations, and ensuring compliance with company policies. </p></li><li><p><strong>Relationships with Suppliers</strong>: Manage supplier relationships by professionally sourcing materials from local and international suppliers, issuing and following up on enquiries, reviewing offers for compliance, and placing sub-orders while ensuring alignment with client requirements and company standards.</p></li><li><p><strong>Follow-up of the sales and after-sales</strong>: Oversee the post-sales process by coordinating deliveries with all involved parties, preparing shipping and vendor documentation, tracking payments, and ensuring project performance through detailed follow-up and reporting.</p></li><li><p><strong>Procedures and Quality</strong>: Ensure compliance with company procedures by properly filing all sales documents and promptly addressing client complaints, reporting any technical issues to the QA Manager for resolution.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s in mechanical engineering with 5 to 10 years of experience in a similar position and Energy sector in the Abu Dhabi.</p></li><li><p>Experience in shutdown and maintenance products and services</p></li><li><p>Strong technical knowledge of mechanical products used in Energy sectors</p></li><li><p>Knowledge of the following products would be an advantage: steam traps and systems, mechanical interlocks, air vents/systems and liquid drainers, control valves.</p></li><li><p>Aware of ADNOC specification, procedures and supply chain process.</p></li><li><p>Strong negotiation skills and Business principles knowledge</p></li><li><p>Good understanding of the Company’s business, products and markets</p></li><li><p>Good understanding of supply process that is from inquiry to the execution phase</p></li><li><p>Deep understanding of projects cycle from tendering to execution phase</p></li><li><p>Excellent English verbal and written communication skills.</p></li><li><p>Customer service orientation.</p></li></ul>

<ul><li><p>Be responsible for providing and coordinating patient care, educating patients and the public about various health conditions, and providing advice and emotional support to patients and their family members.</p></li><li><p>Assess and identify patients' needs and implement and monitor the patient's medical plan and treatment. They will work with a team of physicians and other health care specialists or allied health in various settings.</p></li><li><p>Perform systematic patient assessment, re-assessment and collect pertinent data about the patient’s health or situation.</p></li><li><p>Understand and analyse the assessment information and data.</p></li><li><p>Determine actual and potential nursing diagnoses, problems, and issues.</p></li><li><p>Define the predicted and expected outcomes of the patient’s planned care.</p></li><li><p>Create and evaluate patient care plans with the interprofessional team, in collaboration with the patient and patient's bystanders.</p></li><li><p>Record vital signs, recognize,&nbsp;address and escalate all abnormalities.</p></li><li><p>Maintain and update technical and clinical skills related to nursing practice.</p></li><li><p>Employ strategies to promote patients’ health and a safe environment.</p></li><li><p>Understand different diagnostic tests and laboratory examinations.</p></li><li><p>Perform essential life support as per regulatory requirements and scope such as but not limited to Basic Life Support, Pediatric Advanced Life Support, Advanced Cardiac Life Support, Neonatal Resuscitation etc.</p></li><li><p>Prepare patients for medical examination and treatment.</p></li><li><p>Administer medications and monitor patients for any side effects and reactions.</p></li><li><p>Administer treatments such as IV fluids or blood products and monitor patients for any reactions.</p></li><li><p>Provide wound care management.</p></li><li><p>Assist in medical procedures invasive or non-invasive as needed.</p></li><li><p>Facilitate the process of safe patient`s admission, transfer and discharge.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Essential: <em>the post holder must</em></p><ul><li><p>Have an appropriate license to work as a registered nurse in the relevant regulatory health authority with all the qualifications and experience these mandates.</p></li><li><p>Manage their own professional re-licensure.</p></li><li><p>Hold a valid American Heart Association Basic Life Support Provider card.</p></li><li><p>Be willing to work across departments when necessary.</p></li><li><p>Be able to communicate clearly and effectively in English (spoken and written)</p><br></li></ul><p>DESIRABLE: The post holder <em>should have</em>:</p><ul><li><p>Evidenced ability to work as part of an inter-professional team.</p></li><li><p>Organizational and administrative skills with which to use the electronic medical record platform for clinical documentation.</p></li></ul><p>Be able to communicate effectively in Arabic</p>

<p>We are seeking Sri Lankan and Philippine nationality skilled and hands-on <strong>Working Team Leader cum Carpenter with proven experience in the exhibition and events industry.</strong></p><br><p>This dual-role position combines expert technical carpentry skills with leadership and on-site coordination responsibilities.</p><br><p>You will be responsible for leading a team in the fabrication, assembly, and on-site of custom-built, assembly, installation of Exhibition stands and temporary custom structures, props, and installations such as MDF walls, Structure, backdrops, related setups, platforms, and props for various exhibitions and events such as concerts, trade shows, festivals, and other special occasions, ensuring quality, safety, and timely execution.</p><br><ul><li><p><strong>Key Responsibilities:</strong></p><ul><li><p>Supervise and lead a team of carpenters on workshop and on-site assignments.</p></li><li><p>Read and interpret technical drawings, CAD plans, and build specifications accurately.</p></li><li><p>Recommend and select suitable materials (wood, laminates, MDF, acrylics, metals, fabrics, etc.) based on project needs, durability, weight, and cost.</p></li><li><p>Oversee on-site stand installation and dismantling within project timelines.</p></li><li><p>Coordinate with project managers, designers, and other trades (electrical, graphics, etc.) to ensure smooth execution.</p></li><li><p>Ensure compliance with safety standards and quality control procedures.</p></li><li><p>Monitor materials usage, reduce waste, and report inventory needs.</p></li><li><p>Solve on-site problems with quick, practical solutions.</p></li><li><p>Mentor and train junior carpenters and ensure adherence to best practices at the worksite.</p></li><li><p>Ensure proper management and maintenance of the workshop space and its contents including machinery, tools, materials and plant</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Core Personal Traits:</strong></p><ul><li><p>Highly adaptable with a flexible, can-do attitude.</p></li><li><p>Willingness to work extended overtime hours, including early mornings, late nights, weekends, and public holidays, as per project requirements.</p></li><li><p>Strong commitment to teamwork, reliability, and accountability.</p></li><li><p>Physically fit and capable of handling hands-on carpentry and demanding on-site conditions.</p></li><li><p>Willing to stay in company-provided shared accommodation.</p></li><li><p>Minimum fixed working hours: 11 hours per day. Overtime is paid for additional hours on normal workdays of the week, and on weekends, and public holidays.</p></li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li><p>ITI diploma or Vocational training in Carpentry or Woodworking.</p></li><li><p>Mandatory Prior experience in the events, exhibitions, or fit-out industry.</p></li><li><p>Fluent communication skills in English (read, write, and speak).</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>Ref No. JD-107 v2</strong></span></p><br><p><strong>Company:</strong></p><br><p>Alpin Limited is a leading sustainability consultant in the Middle East, with its global headquarters in Masdar City, Abu Dhabi—the world's first sustainable city. We're on a mission to transform the built environment by providing innovative commissioning, sustainability, and climate change solutions. As a company, we are committed to thought leadership and making a tangible difference in the world. We pride ourselves on having a diverse, multicultural team of experts who are passionate about creating a more sustainable future. At Alpin, you'll be part of a dynamic, 'young-at-heart' culture that values collaboration, innovation, and continuous learning.</p><br><p>To know more about Alpin Limited and its services and projects please visit <strong>www.alpinme.com</strong></p><br><p><strong>Reports Directly to</strong><strong>:</strong></p><br><p>Commissioning Manager</p><br><p><span><strong>Roles and Responsibilities:</strong></span></p><br><p><span>•Maintain the required KPIs and strive for continued personal development.</span></p><br><p><span>• Supervising on-site commissioning and site management</span></p><br><p><span>• Overseeing installation of equipment on site</span></p><br><p><span>• Prepares and ensure pre-start-up activities supervision using Contractors Commissioning Supervisors and Technicians</span></p><br><p><span>• Assist with the preparation of Commissioning handover manuals and relevant tracking/filing of commissioning reports,</span></p><br><p><span>• Good knowledge of reading and interpreting drawings, schematics, and specifications</span></p><br><p><span>• Scheduling and coordinating work to tight deadlines</span></p><br><p><span>• Daily implementation of the safety culture and driving of safety improvement initiatives.</span></p><br><p><span>• Assist Sr. Commissioning Engineer in the preparation and issue of the relevant progress reports &amp;amp; lists</span></p><br><p><span>• Reporting to Commissioning Manager</span></p><br><p><strong>HSE Roles, Responsibilities, and Accountability:</strong></p><br><p>• In addition to your responsibility towards following ALPIN’s Integrated Management System, every employee at ALPIN must familiarize themselves with ALPIN’s Environmental Impact Assessment and contribute towards minimizing their individual environmental impact during their work.</p><br><p>• It is the duty of all employees to act within the legal responsibilities imposed upon them and the Company’s Quality, Environment, and Health &amp;amp; Safety policies. All employees must familiarize themselves with the Company’s Integrated Management System’s policies and procedures.</p><br><p>Skills &amp;amp; Qualifications:</p><br><p>• Language Requirements: English.</p><br><p>• Education Requirements: Mechanical maintenance, electrical and ELV</p><br><p>• Experience Requirements: 1 to 3 years of Field experience in Technical Services, on Industrial engineered equipment.</p><br><p>• Good ability to communicate with internal and external stakeholders.</p><br><p>• Intermediate IT skills (MS Office applications, Service Management software).</p><br> </div>

<p>Hiring: Joinery Procurement Officer<br>Company: RUKOOZ WOOD INDUSTRIES LLC<br></p><p><strong>Job Summary:</strong></p><p>RUKOOZ is seeking an experienced and detail-oriented Procurement Officer to join our growing team. The successful candidate will be responsible for sourcing and procuring materials, hardware, accessories, and services required for joinery, woodworking, and interior fit-out projects while ensuring competitive pricing, quality compliance, and timely delivery.<br></p><p>Key Responsibilities:</p><ul><li><p>Review material requirements, specifications, BOQs, and approved material submittals.</p></li><li><p>Source joinery materials, hardware, accessories, finishes, and related services.</p></li><li><p>Obtain, evaluate, and compare quotations from suppliers and subcontractors.</p></li><li><p>Negotiate prices, payment terms, delivery schedules, and commercial conditions.</p></li><li><p>Prepare purchase orders and ensure compliance with approved specifications and project budgets.</p></li><li><p>Coordinate with estimation, design, production, warehouse, and project management teams.</p></li><li><p>Monitor purchase orders and follow up with suppliers to ensure timely delivery.</p></li><li><p>Verify delivered materials against purchase orders, approved samples, and required specifications.</p></li><li><p>Maintain accurate procurement records, supplier databases, price lists, and supporting documentation.</p></li><li><p>Identify and develop reliable local and international suppliers.</p></li><li><p>Resolve supplier-related issues, including delayed deliveries, shortages, damaged materials, and quality concerns.</p></li><li><p>Support value engineering and identify cost-saving opportunities without compromising quality.</p></li><li><p>Monitor market prices and material availability.</p></li><li><p>Assist with material submittals, technical data sheets, samples, and supplier documentation when required.<br></p></li></ul><p><strong>Qualifications & Requirements:</strong></p><ul><li><p>Bachelor’s Degree or Diploma in Supply Chain Management, Procurement, Engineering, Business Administration, or a related field.</p></li><li><p>Minimum 3 years of procurement experience in the joinery, woodworking, or interior fit-out industry.</p></li><li><p>UAE procurement experience and knowledge of the local supplier market are required.</p></li><li><p>Strong knowledge of MDF, plywood, solid wood, veneers, laminates, ironmongery, hardware, adhesives, finishes, and other joinery materials.</p></li><li><p>Ability to read and understand BOQs, technical specifications, shop drawings, and material schedules.</p></li><li><p>Strong negotiation, analytical, organizational, and communication skills.</p></li><li><p>Proficiency in Microsoft Excel and procurement or ERP systems.</p></li><li><p>Ability to manage multiple purchase requirements and meet strict project deadlines.</p></li><li><p>Valid UAE driving licence is preferred.<br></p></li></ul><p><strong>What We Offer:</strong></p><ul><li><p>Career growth opportunities within a leading woodworking and joinery company.</p></li><li><p>Professional and collaborative work environment.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Preferred Skills:</strong></p><ul><li><p>Established relationships with joinery, hardware, and fit-out suppliers in the UAE.</p></li><li><p>Experience in purchasing materials for doors, wardrobes, kitchens, vanity units, and architectural joinery.</p></li><li><p>Understanding of factory production requirements and project delivery schedules.</p></li><li><p>Experience in supplier evaluation, cost comparison, and procurement planning.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>·</span></span><span><span>Oversee the development of policies, procedures, and regulations related to the Consulting and Training Department in accordance with best practices and government legislation, to ensure the department’s efficiency and effectiveness</span><span>.</span></span></p><br><p><span><span>·</span></span><span><span>Participate in the preparation and development of the Dubai Government’s records management strategy; prepare operational plans related to the department; and ensure their alignment with the Public Library’s guidelines</span><span>.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the preparation of an annual plan for providing specialized consulting and technical services to government agencies on a fee-for-service basis, including the identification of priority areas such as classification, preservation, cataloging, inventory, and disposal, as well as the determination of the services that can be provided.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the delivery of the technical advisory services included in the approved plan, either through specialized teams within the library or in coordination with vendors and consulting firms contracted in accordance with approved regulations, thereby ensuring the provision of high-quality professional support in the areas of records management to government agencies.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the preparation of periodic technical studies on archival practices, based on regional and international best standards and practices, and publish them with the aim of enriching knowledge and promoting continuous development in the field of records management.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the preparation of a qualification and training plan for archivists working in the Dubai Government and the Library’s archives sector, and monitor its implementation in coordination with the relevant authorities and in accordance with the approved schedule.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the design of specialized training and professional development programs in the fields of records and archives management, and prepare academic and practical materials in accordance with training needs.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the implementation of qualification and training programs for archivists in government agencies and employees in the archival sector.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee the delivery of awareness programs in the field of records and archives management, and supervise awareness programs offered by government agencies to raise awareness about archival work.</span></span></p><br><p><span><span>·</span></span><span><span>Oversee coordination with universities, academic institutions, and specialized consulting firms to support the implementation of training and qualification programs related to records and archives management, and evaluate their outcomes.</span></span></p><br><p><span><span>·</span></span><span><span>Any other duties or responsibilities related to the nature of the department’s work that are assigned to him by his immediate supervisor.</span></span></p><br> <p><span><span><strong>Academic Qualifications and Years of Experience</strong></span><span><strong>:</strong></span></span></p><br><p><span><span>Bachelor’s degree (11 years) / Master’s degree (9 years) of experience in a related field</span><span>.</span></span></p><br><p><span><span>Field of Study: Archival Science, History, Political Science, Public Administration, or a related field</span><span>.</span></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A Structural Design Engineer is responsible for the analysis, design, and verification of structural systems for buildings, industrial facilities, infrastructure projects, data centers, and other construction developments, ensuring that structures are safe, economical, durable, and compliant with applicable codes and standards. The role involves preparing structural calculations, design reports, and detailed engineering solutions for reinforced concrete, structural steel, composite, and foundation systems. The Structural Design Engineer works closely with architects, geotechnical engineers, MEP engineers, project managers, contractors, and clients to develop efficient structural designs that meet project requirements while optimizing cost, constructability, and performance. Key responsibilities include performing load calculations, structural analysis, member sizing, connection design, foundation design, and seismic and wind resistance assessments using industry-standard software such as ETABS, STAAD.Pro, SAFE, SAP2000, Revit Structure, and Tekla. The engineer is responsible for preparing and reviewing structural drawings, design calculations, technical specifications, and material quantities, ensuring compliance with international standards such as ACI, AISC, BS, Eurocodes, and local regulatory requirements.</p><br><p>The Structural Design Engineer participates in design coordination meetings and collaborates with multidisciplinary teams to resolve design conflicts, improve constructability, and support project execution. The role also involves conducting value engineering studies, evaluating alternative design solutions, and recommending cost-effective structural systems without compromising safety or quality. During project execution, the engineer reviews shop drawings, material submittals, fabrication drawings, and construction methodologies to ensure alignment with the approved design intent. The position may require performing structural assessments, condition surveys, retrofitting studies, and technical investigations for existing structures. Additionally, the Structural Design Engineer supports site teams by addressing design-related queries, reviewing non-conformance reports, and providing technical solutions to construction challenges. Strong analytical, problem-solving, and communication skills are essential, as the role demands interaction with clients, consultants, authorities, and internal project stakeholders. Candidates typically possess a Bachelor's Degree in Civil or Structural Engineering, with proficiency in structural analysis and design software and a thorough understanding of engineering principles and construction practices. The Structural Design Engineer contributes significantly to project success by delivering innovative, practical, and code-compliant structural solutions that ensure safety, reliability, efficiency, and long-term performance throughout the lifecycle of the project.</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are looking for an experienced and skilled Specialist Oral &amp; Maxillofacial Surgeon to join a leading healthcare facility in the UAE.<br> The ideal candidate will have strong expertise in oral surgery, maxillofacial surgery, dentoalveolar procedures, facial trauma, and comprehensive surgical management of oral and maxillofacial conditions .<br> The successful candidate will work closely with dentists, orthodontists, prosthodontists, ENT specialists, plastic surgeons, radiologists, and other healthcare professionals.<br> Key Responsibilities Conduct comprehensive oral and maxillofacial surgical consultations and clinical assessments.<br> Diagnose and develop individualized treatment plans for oral and maxillofacial conditions.<br> Perform surgical procedures within the physician's training, competence, and approved clinical scope.<br> Perform routine and complex dentoalveolar surgery , including surgical removal of impacted teeth.<br> Manage complicated dental extractions and surgical dental conditions.<br> Evaluate and manage patients with oral infections, cysts, benign lesions, and other maxillofacial conditions.<br> Assess and manage facial trauma and associated soft-tissue and bony injuries where appropriately trained.<br> Perform appropriate pre-operative and post-operative assessments.<br> Evaluate patients requiring dental implant-related surgical procedures and coordinate treatment with restorative dental specialists.<br> Review and interpret dental radiographs, panoramic imaging, CBCT, CT, MRI, and other relevant diagnostic studies.<br> Manage surgical complications and provide appropriate follow-up care.<br> Provide appropriate emergency assessment and management of acute oral and maxillofacial conditions.<br> Collaborate with orthodontists and other specialists in cases requiring multidisciplinary treatment.<br> Communicate treatment options, surgical procedures, risks, benefits, and expected outcomes clearly to patients.<br> Maintain accurate, comprehensive, and confidential clinical records.<br> Follow strict infection-control and patient-safety standards.<br> Participate in multidisciplinary meetings, clinical audits, quality improvement, and continuing professional development.<br> Maintain compliance with UAE healthcare regulations, professional standards, and facility policies.<br> BDS, DDS, DMD, MBBS, or equivalent recognized qualification appropriate to the specialty.<br> Recognized postgraduate qualification in Oral &amp; Maxillofacial Surgery or an equivalent recognized specialty qualification.<br> Relevant post-specialization clinical experience.<br> Strong experience in oral and maxillofacial surgical procedures.<br> Excellent clinical assessment and surgical decision-making skills.<br> Strong knowledge of modern oral surgery and maxillofacial surgical techniques.<br> Excellent patient communication and interpersonal skills.<br> Ability to work effectively within a multidisciplinary healthcare team.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <div dir="rtl"><p><strong>Job Description:</strong></p><br><p>1. يعد التقارير اليومية والأسبوعية والشهرية الخاصة بالحضور والانصراف والانضباط الوظيفي ويرفعها للجهات المختصة. 2. يتابع التزام الموظفين بأيام وساعات العمل الرسمية المعتمدة وفق الأنظمة واللوائح النافذة. 3. يشرف على تسجيل بيانات الحضور والانصراف باستخدام أجهزة البصمة أو الأنظمة الإلكترونية أو أي وسائل معتمدة. 4. يراجع سجلات الحضور اليومية للتحقق من صحة البيانات واكتمالها واكتشاف أي حالات استثنائية. 5. يتابع الموظفين المعفيين من استخدام أجهزة تسجيل الحضور وفق القرارات والصلاحيات المعتمدة. 6. يرصد تكرار مخالفات الدوام ويعد التقارير اللازمة تمهيداً لإحالتها إلى الجهات المختصة عند بلوغ الحدود النظامية. 7. ينسق مع الرؤساء المباشرين للتحقق من مبررات المخالفات والتي تشمل حالات الغياب أو التأخير أو عدم تسجيل الحضور والانصراف. 8. يحلل مؤشرات الالتزام بالدوام ويحدد حالات التكرار في التأخير أو الغياب أو المخالفات. 9. ينسق مع إدارة الموارد البشرية لتطبيق الجزاءات والإجراءات النظامية المتعلقة بمخالفات الدوام وفق اللوائح المعتمدة. 10. يتابع إخطار الموظفين بالجزاءات والإجراءات المتخذة ضمن المدد الزمنية المحددة. 11. ينسق مع إدارة تقنية المعلومات لمعالجة الأعطال الفنية المتعلقة بأجهزة وأنظمة الحضور والانصراف وضمان استمرارية عملها. 12. يحدث بيانات الحضور والانصراف على نظام الموارد البشرية ويضمن تكاملها ودقتها. 13. يحفظ سجلات وتقارير الحضور والانصراف وأرشفتها إلكترونياً وفق سياسات حفظ الوثائق وسرية المعلومات. 14. يقدم الدعم والإرشاد للموظفين فيما يتعلق بإجراءات الحضور والانصراف وآلية استخدام الأنظمة الإلكترونية. 15. يقترح تطوير إجراءات وأنظمة متابعة الدوام بما يسهم في رفع مستوى الالتزام وتحسين كفاءة العمليات. 16. يلتزم بتطبيق أنظمة الموارد البشرية والسياسات الداخلية المتعلقة بالدوام والانضباط الوظيفي. 17. ينفذ أي مهام أخرى ذات صلة بطبيعة الوظيفة يكلف بها من الرئيس المباشر. </p><br><p><strong>Minimum Qualifications:</strong></p><br><p>درجة البكالوريوس في إدارة الموارد البشرية أو إدارة الأعمال أو أي تخصص ذي صلة. </p><br><p><strong>Experience/Skills:</strong></p><br><p>الخبره المطلوبة: من سنتين إلى أربع سنوات في مجال شؤون الموظفين أو عمليات الموارد البشرية أو إدارة الحضور والانصراف باستخدام الأنظمة الإلكترونية، لضمان الإلمام بالإجراءات التشغيلية، والأنظمة التقنية، والتشريعات ذات العلاقة. الكفاءات المطلوبة: إجادة Microsoft Excel بمستوى متقدم. إعداد وتحليل التقارير الإحصائية. تحليل البيانات ومؤشرات الأداء. الإلمام بتشريعات وأنظمة العمل. إعداد مؤشرات الأداء (KPIs). إجادة تطبيقات Microsoft Office. </p><br><p><strong>Preferred Qualifications:</strong></p><br><p>درجة البكالوريوس في إدارة الموارد البشرية أو إدارة الأعمال أو أي تخصص ذي صلة. </p><br></div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview of the Role</b></p><p>Join <b>Al-Futtaim Automotive</b> as a <b>Warranty Executive</b> and play a vital role in supporting Toyota and Lexus aftersales operations across the UAE.</p><p>In this role, you will ensure warranty claims are processed accurately and efficiently, while maintaining compliance with manufacturer policies and procedures. You will work closely with service centers, warranty teams, and key stakeholders to maximize warranty recoveries, improve process quality, and support vehicle safety initiatives across the network.</p><p>&nbsp;</p><p><b>What You Will Do</b></p><ul><li>Review, adjudicate, and authorize warranty repairs and warranty claims submitted by Toyota and Lexus service centers</li><li>Ensure warranty submissions meet manufacturer requirements to maximize recoveries and minimize claim rejections</li><li>Monitor warranty claim quality, accuracy, and processing timelines</li><li>Conduct warranty audits and coaching visits across the dealer network to ensure compliance with established policies and procedures</li><li>Develop and monitor action plans to address areas of non-compliance and improve overall warranty performance</li><li>Support the launch and monitoring of Safety Recall Campaigns, Special Service Campaigns, and Customer Satisfaction Campaigns</li><li>Coordinate parts recovery activities and maintain communication with manufacturers regarding returned parts</li><li>Maintain warranty performance dashboards and provide regular KPI reporting</li><li>Collaborate with technical teams and aftersales stakeholders to identify quality concerns and process improvement opportunities</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills to be Successful</b></p><ul><li>Strong analytical and problem-solving abilities</li><li>Excellent attention to detail and accuracy</li><li>Good understanding of automotive warranty processes and dealership operations</li><li>Strong auditing, compliance, and reporting skills</li><li>Effective communication and stakeholder management capabilities</li><li>Ability to interpret technical and warranty-related information</li><li>Strong planning, organization, and follow-up skills</li><li>Proficiency in Microsoft Office and ERP systems such as SAP</li></ul><p>&nbsp;</p><p><b>About the Team</b></p><p>You will be part of the <b>Toyota &amp; Lexus Warranty Department</b> within Al-Futtaim Automotive's Distributor Operations team. Working closely with aftersales, technical, and dealership teams across the UAE, you will contribute to maintaining the quality, compliance, and efficiency standards associated with two of the world's most trusted automotive brands.</p><p>&nbsp;</p><p><b>What Equips You for the Role</b></p><ul><li>Diploma or Degree in Mechanical or Automotive Engineering</li><li>Minimum <b>5 years of automotive industry experience</b></li><li>3–5 years of experience in a Warranty Administrator or Warranty-related role</li><li>Strong knowledge of automotive warranty policies and procedures</li><li>Experience with dealer management systems and SAP</li><li>Strong communication, presentation, and stakeholder management skills</li><li>Ability to work independently while managing multiple priorities</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Service Advisor – Passenger Vehicles | Multiple Vacancies | Dubai &amp; Abu Dhabi&nbsp;</b></p><p><br></p><p>Join our Aftersales team as a Service Advisor, where you will be the face of our organization and the key link between our customers and workshop operations.</p><p>In this role, you will create an exceptional end-to-end customer journey—building lasting relationships, ensuring transparency, and delivering a seamless service experience that drives both customer retention and business growth.</p><p>&nbsp;</p><p><b>What You Will Do</b></p><p>• Deliver an outstanding customer experience by guiding customers through their entire service journey</p><p>• Build long-term relationships to drive customer loyalty and retention</p><p>• Upsell products and services responsibly to achieve revenue targets</p><p>• Identify customer concerns and ensure vehicles are repaired right the first time</p><p>• Coordinate closely with workshop teams to ensure timely updates and on-time delivery</p><p>• Clearly explain repairs, maintenance requirements, costs, and value-added services to customers</p><p>• Handle customer concerns professionally to enhance satisfaction and customer loyalty</p><p>• Ensure full compliance with SOPs, systems, and data accuracy standards</p><p>• Contribute to departmental performance and customer satisfaction objectives</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills to be Successful</b></p><p>• Strong customer service and relationship management skills</p><p>• Good technical understanding of passenger vehicles and automotive service processes</p><p>• Excellent communication and interpersonal skills</p><p>• Ability to manage multiple customers while maintaining service quality</p><p>• Commercial awareness with a focus on achieving targets</p><p>• Strong problem-solving and organizational skills</p><p>• Proficiency in MS Office (experience with dealer management systems is an advantage)</p><p>&nbsp;</p><p><b>About the Team</b></p><p>You will work closely with a dedicated Aftersales team, including workshop, parts, and service operations, in a fast-paced environment where teamwork and customer satisfaction are at the heart of everything we do.</p><p>&nbsp;</p><p><b>What Equips You for the Role</b></p><p>• Diploma or Bachelor’s Degree in Automobile Engineering, Mechanical Engineering, or a related field</p><p>• 3–5 years of experience in the automotive industry, preferably in a Service Advisor or similar customer-facing role</p><p>• Strong technical knowledge of passenger vehicles combined with customer service experience</p><p>• Experience working in a dealership or automotive service environment</p><p>• Fluency in English; basic Arabic is an advantage</p><p>• A customer-first mindset with strong attention to detail</p><p>&nbsp;</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> If you are an experienced MEP Estimator looking to join one of Dubai's leading fit-out contractors, we would love to hear from you. Apply now with your CV and a brief summary of your relevant project experience.<br> The Role Reporting to the Estimating Manager, you will be responsible for preparing accurate and competitive MEP cost estimates for high-value interior fit-out projects. You will work closely with the commercial, design, procurement, and operations teams to develop winning bids while ensuring commercial viability and technical compliance.<br> Key Responsibilities <ul> <li>Prepare detailed cost estimates for Mechanical, Electrical and Plumbing (MEP) works on commercial fit-out projects.</li> <li>Review tender documentation, drawings, specifications and scope requirements.</li> <li>Perform accurate quantity take-offs from drawings and BIM models where applicable.</li> <li>Obtain and evaluate supplier and subcontractor quotations.</li> <li>Analyse project risks, value engineering opportunities and cost-saving initiatives.</li> <li>Develop pricing schedules, BOQs and tender submissions.</li> <li>Liaise with design, procurement and project delivery teams throughout the tender process.</li> <li>Attend site visits, pre-tender meetings and client briefings when required.</li> <li>Ensure estimates are completed within tender deadlines and company standards.</li> <li>Maintain current knowledge of market rates, suppliers and subcontractor pricing throughout the UAE.</li> </ul> Requirements <ul> <li>Bachelor's Degree or Diploma in Mechanical, Electrical or Building Services Engineering.</li> <li>Minimum <strong>5 years' experience</strong> as an MEP Estimator within the UAE or GCC.</li> <li>Proven experience pricing commercial interior fit-out projects.</li> <li>Strong understanding of HVAC, electrical, plumbing, fire protection and ELV systems.</li> <li>Excellent knowledge of UAE suppliers, subcontractors and market rates.</li> <li>Ability to interpret technical drawings and specifications.</li> <li>Proficiency in estimating software and Microsoft Excel.</li> <li>Strong analytical, commercial and negotiation skills.</li> <li>Excellent written and verbal English communication skills.</li> </ul> Desirable <ul> <li>Experience working for a Tier 1 fit-out contractor.</li> <li>Knowledge of BIM-based quantity take-offs.</li> <li>Familiarity with FIDIC contracts.</li> <li>UAE driving licence</li> </ul> If you are an experienced MEP Estimator looking to join one of Dubai's leading fit-out contractors, we would love to hear from you. Apply now with your CV and a brief summary of your relevant project experience. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job LEAD DISCIPLINE ENGINEER (FIELD) - MECHANICAL <p>We are looking for a highly experienced Lead Discipline Engineer (Field) – Mechanical to oversee and support all field mechanical engineering activities on a major onshore oil and gas project. The successful candidate will ensure that mechanical installation, testing, mechanical completion, pre-commissioning, and commissioning activities are executed safely, efficiently, and in compliance with project specifications, applicable codes, and client requirements.</p><br> <p><strong>JOB RESPONSIBILITIES:</strong></p><br> <ul> <li>Lead and supervise all onshore mechanical field engineering activities during construction, pre-commissioning, and commissioning phases </li> <li>Ensure mechanical installation works are executed in accordance with approved drawings, project specifications, applicable codes, and client requirements </li> <li>Coordinate with construction, engineering, QA/QC, commissioning, and operations teams to resolve field mechanical engineering issues </li> <li>Review and provide technical support for the installation of static and rotating equipment, piping systems, packages, pressure vessels, tanks, heat exchangers, and field design modifications </li> <li>Monitor construction progress and ensure compliance with project schedules, safety requirements, and quality standards </li> <li>Review and approve field technical queries (TQs), site instructions, method statements, and engineering change requests </li> <li>Provide technical guidance on equipment installation, piping erection, alignment, hydrotesting, flushing, bolting, preservation, and mechanical completion activities </li> <li>Participate in site inspections, walkdowns, punch list clearance, mechanical completion, and final acceptance activities </li> <li>Liaise with the client, EPC teams, subcontractors, and other stakeholders on all mechanical field engineering matters </li> </ul> <p><strong>KEY QUALIFICATIONS:</strong></p><br> <ul> <li>Bachelor's degree in mechanical engineering or equivalent Engineering discipline </li> <li>Minimum 15–20 years of experience in mechanical engineering, with significant experience in onshore field engineering for oil and gas projects </li> <li>Proven track record on large-scale onshore oil and gas, gas processing, or petrochemical projects </li> <li>Strong expertise in mechanical installation, construction support, static and rotating equipment, piping systems, mechanical completion, pre-commissioning, and commissioning activities </li> <li>Thorough knowledge of international codes and standards including ASME, API, ASTM, ISO, and relevant client specifications </li> <li>Experience with ADNOC Onshore projects is strongly preferred </li> <li>Strong leadership, coordination, and multidisciplinary communication skills </li> <li>Familiarity with engineering documentation, field engineering procedures, and construction management practices.</li> </ul><p>VERTICAL</p><br><p>ENGINEERING</p><br> <br> <br> </div>

<ul><li><p>Be responsible for providing and coordinating patient care, educating patients and the public about various health conditions, and providing advice and emotional support to patients and their family members.</p></li><li><p>Assess and identify patients' needs, and implement and monitor the patient's medical plan and treatment.</p></li><li><p>Work collaboratively with physicians and other healthcare professionals or allied health teams in various clinical settings.</p></li><li><p>Perform systematic patient assessments and reassessments, collecting pertinent data regarding the patient's health condition.</p></li><li><p>Analyse assessment findings and clinical data to support informed decision-making.</p></li><li><p>Determine actual and potential nursing diagnoses, problems, and patient care priorities.</p></li><li><p>Define expected and predicted outcomes for the patient's plan of care.</p></li><li><p>Develop, implement, and evaluate individualized patient care plans in collaboration with the interdisciplinary team, patients, and their families.</p></li><li><p>Record and monitor vital signs, recognizing, addressing, and escalating any abnormalities promptly.</p></li><li><p>Maintain and continuously update technical and clinical competencies related to nursing practice.</p></li><li><p>Implement strategies to promote patient health, safety, and a therapeutic environment.</p></li><li><p>Interpret and understand diagnostic tests and laboratory investigations.</p></li><li><p>Perform essential life support procedures within the regulatory scope of practice, including but not limited to Basic Life Support (BLS), Pediatric Advanced Life Support (PALS), Advanced Cardiac L<strong><u>ife S</u></strong>upport (ACLS), and Neonatal Resuscitation Program (NRP).</p></li><li><p>Prepare patients for medical examinations, diagnostic procedures, and treatments.</p></li><li><p>Administer medications safely and monitor patients for therapeutic effects, side effects, and adverse reactions.</p></li><li><p>Administer treatments such as intravenous (IV) fluids and blood products, while monitoring for any complications or reactions.</p></li><li><p>Provide comprehensive wound assessment and wound care management.</p></li><li><p>Assist physicians with invasive and non-invasive medical procedures as required.</p></li><li><p>Facilitate the safe admission, transfer, and discharge of patients in accordance with established policies and procedures.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Essential Requirements</p><ul><li><p>Hold a valid Registered Nurse license from the relevant regulatory health authority, with all required qualifications and experience.</p></li><li><p>Be responsible for maintaining and renewing professional licensure as required by the regulatory authority.</p></li><li><p>Hold a valid <strong>American Heart Association (AHA) Basic Life Support (BLS) Provider</strong> certification.</p></li><li><p>Be willing and flexible to work across departments as required by operational needs.</p></li><li><p>Demonstrate excellent verbal and written communication skills in English.</p></li></ul><br><p>Desirable Requirements</p><ul><li><p>Demonstrated ability to work effectively as part of an interdisciplinary healthcare team.</p></li><li><p>Possess strong organizational and administrative skills, including proficiency in using Electronic Medical Record (EMR) systems for clinical documentation.</p></li><li><p>Demonstrate effective verbal communication skills in Arabic.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>It's fun to work in a company where people truly BELIEVE in what they're doing!</b></p><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><p>Job Description:</p><br><br><br><br><br><br><br><br><p><b><span>It's</span><span>fun to work in a company where people</span><span>truly BELIEVE</span><span>in what</span><span>they're</span><span>doing!</span></b></p><br><br><p><span><span>Ingram Micro is a leading technology company for the global information technology ecosystem.</span></span></p><br><br><p><span><span>With the ability to reach</span><span>nearly 90%</span><span>of the global population, we play a vital role in the worldwide IT sales channel, bringing products and services from technology manufacturers and cloud providers to business-to-business technology experts.&nbsp;</span></span></p><br><br><p><span><span>Our market reach, diverse solutions and services portfolio, and digital platform Ingram Micro</span><span>Xvantage</span><span>™ set us apart</span></span></p><br><br><p><span><span> Collaboration is at the heart of innovation. Our team drives Ingram Micro’s innovative campaigns, highlighting our</span><span>cutting-edge</span><span>solutions and enabling us to</span><span>maintain</span><span>leadership in the technology distribution industry. We work together to shape the future of technology distribution, ensuring products reach customers efficiently and helping businesses thrive globally.</span></span></p><br><br><p><span><span> At Ingram Micro, we are shaping the future with</span><span>cutting-edge</span><span>technology! We foster a culture of collaboration, transparency, and continuous improvement. Our team members are encouraged to share ideas, challenge the status quo, and work together to shape the future of technology distribution.</span></span></p><br><br><p><span><span> As a Technical Presales Consultant,</span><span>you’ll</span><span>play a critical role in enhancing the sales of assigned products by offering presales support to customers. Your key responsibilities will include:</span></span></p><br><br><ul><li><p><span><span>Converting customer/reseller inquiries into the right technical solutions.</span></span></p><br></li></ul><br><ul><li><p><span><span>Meeting with end-users to better understand their requirements.</span></span></p><br></li></ul><br><ul><li><p><span><span>Generating Bills of Materials and designing solution blocks in collaboration with hardware/software vendors.</span></span></p><br></li></ul><br><ul><li><p><span><span>Conducting demos and proof of concept presentations to customers.</span></span></p><br></li></ul><br><ul><li><p><span><span>Arranging and conducting technical training for partners and customers.</span></span></p><br></li></ul><br><p><b><span>What You Bring to the Role:</span></b><span><span>We’re</span><span>looking for someone with:</span></span></p><br><br><ul><li><p><span><span>3-5 years of presales experience.</span></span></p><br></li></ul><br><ul><li><p>You have Gulf and Cyber Security experience.</p><br></li></ul><br><ul><li><p><span><span>Enthusiasm and a results-driven mindset with a strong will to succeed.</span></span></p><br></li></ul><br><ul><li><p><span><span>Excellent communication skills and the ability to work proactively.</span></span></p><br></li></ul><br><p><span><span>Joining Ingram Micro means becoming</span><span>part of a</span><span>global leader in technology solutions. We offer a dynamic work environment, opportunities for professional growth, and the chance to make a significant impact on the future of technology distribution. Together, we build careers. Investing in your future. Partners in putting you first. Committed to your success.</span></span></p><br><br><p>&nbsp;#LI-NS1&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>Black &amp; Grey HR is seeking a Planning Engineer to join our client's Project Controls team on a permanent basis in Abu Dhabi. You will be responsible for developing, monitoring, and updating project schedules to ensure timely project delivery while supporting the successful execution of offshore projects.Working closely with Project Controls, Project Managers, Engineers, and other stakeholders, you will monitor project progress, prepare schedule reports, identify delays and risks, and recommend corrective actions to keep projects on track.</span><br></p><br><span><b>Responsibilities:</b></span><br><span>- Develop and maintain detailed project schedules using appropriate scheduling software.</span><br><br><span>- Monitor project progress and update schedules to reflect actual project performance.</span><br><br><span>- Identify and report deviations from the baseline schedule and recommend corrective actions.</span><br><br><span>- Coordinate with Project Managers, Engineers, and other stakeholders to gather scheduling information.</span><br><br><span>- Facilitate communication between project teams to ensure alignment on project timelines and key milestones.</span><br><br><span>- Assist in resolving scheduling conflicts and project planning issues.</span><br><br><span>- Analyze project schedules to identify potential delays, risks, and opportunities for schedule improvement.</span><br><br><span>- Prepare and present schedule reports to management, highlighting key issues, progress, and recommendations.</span><br><br><span>- Maintain accurate and complete scheduling records and project documentation.</span><br><br><span>- Support the Project Controls Manager with planning, scheduling, and project reporting activities.</span><br><br><span>- Ensure project schedules are aligned with project objectives and contractual milestones.</span><br><br><span>- Provide timely scheduling information to support effective project decision-making.</span><br><br><br><span>Requirements-&nbsp;Bachelor's Degree in Engineering or a related discipline.<br><br><span>- 4–5 years of experience as a Planning Engineer supporting Offshore or Oil &amp; Gas projects is mandatory.</span><br><br><span>- Professional certification such as </span><span>PMP</span><span> or </span><span>PMI-SP</span><span> is an added advantage.</span><br><br><span>- Advanced knowledge of scheduling software such as </span><span>Primavera P6</span><span> and/or </span><span>Microsoft Project</span><span>.</span><br><br><span>- Strong understanding of project management principles and scheduling best practices.</span><br><br><span>- Proficiency in project management tools and scheduling software.</span><br><br><span>- Ability to analyze complex project schedules and identify potential delays and risks.</span><br><br><span>- Strong problem-solving skills with excellent attention to detail.</span><br><br><span>- Ability to prepare accurate and timely schedule reports.</span><br><br><span>- Excellent verbal and written communication skills.</span><br><br><span>- Ability to present scheduling information to both technical and non-technical stakeholders.</span><br><br><span>- Strong interpersonal skills with the ability to collaborate effectively across multidisciplinary teams.</span><br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Sofitel Al Hamra Beach Resort</p><br><br>Job Description<br><br><ul><li>To be an Heartist of the Front Office and of the hotel, in and outside the work place.</li><li>To always keep the working area clean and well maintained.</li><li>To properly use the telephone etiquette as per Sofitel standards.</li><li>To attend all guests approaching the front desk in the procedure of check-in/check-out, inquiries, key handling and all related matters, respecting the hotel standards and procedures.</li><li>To offer a warm welcome to all guests and to ensure that they enjoy their stay being offered the finest personal service.</li><li>To personally greet and escort the guests rather than pointing out directions.</li><li>To respect the privacy of the guests and the confidentiality of the information.</li><li>To manage any guest complaint in a professional manner, by resolving it and making sure the guest is satisfied, and recording it.</li><li>To call the supervisor or manager for advice in serious cases or if an approval is required.</li><li>To share daily activity highlights with the supervisor and manager including internal and external guest opportunities.</li><li>To be aware of and to report all guest comments or complaints.</li><li>To be aware of all VIPs visiting or staying in the hotel.</li><li>To do a proper cashier closer and to ensure a complete handover between the shifts.</li><li>To be aware of forged currency and travelers checks and to respect all the financial and audit procedures.</li><li>To check the departure lists and to ensure check-out times are respected.</li><li>To properly use all the equipment and Fidelio management system, to have a perfect knowledge of the set ups.</li><li>To strictly respect the room keys and section keys handover procedures.</li><li>To daily follow the checklists.</li><li>To daily read the F/O logbook, to update it and to sign it.</li><li>To be aware of all hotel facilities operating timing and to promote the internal activities and events.</li><li>To up sell Rooms, Food and Beverage outlets and other facilities whenever opportunities arise.</li><li>To be updated with the latest administrative, organizational, operational or other changes and news.</li><li>To attend a daily line up briefing with the Front Office team to recapitulate tasks and activity.</li><li>To promote the Accor loyalty programs.</li><li>To maintain an atmosphere of high morale and a happy working relationship among the team.</li><li>To be entirely flexible and adapt to rotate within the different sub sections of the Front Office Department.</li><li>To carry out any other reasonable duties as assigned by the Front Office Supervisor and the Assistant Front Office Manager.</li></ul> </div>