Heavy equipment mechanical engineer Jobs - Dubai UAE

Company Description ATS FZE is a technology-focused engineering and services company operating in the United Arab Emirates, supporting industrial and commercial clients with advanced technical solutions. The organization specializes in the implementation, maintenance, and optimization of engineering systems and equipment, often working closely with client teams on-site. ATS FZE emphasizes reliability, safety, and performance, aiming to deliver high-quality service and long-term value. Team members are encouraged to contribute ideas, collaborate across disciplines, and develop professionally through exposure to diverse projects. The company values integrity, customer focus, and technical excellence in all engagements.<br>Role Description The Resident Engineer is a full-time, on-site role based in the United Arab Emirates, working closely with client staff to provide technical support and oversight for installed systems and equipment. Responsibilities include monitoring system performance, diagnosing and resolving technical issues, coordinating preventive and corrective maintenance, and ensuring compliance with safety and quality standards. The Resident Engineer will review technical documentation and drawings, support installation and commissioning activities, and provide guidance to technicians and operators. The role also involves preparing reports, documenting incidents and resolutions, and communicating regularly with both client stakeholders and ATS FZE’s engineering team. The Resident Engineer is expected to build strong working relationships, proactively identify improvement opportunities, and help optimize system reliability and efficiency.<br>Qualifications<br> Strong foundation in engineering (such as mechanical, electrical, or instrumentation), with the ability to interpret technical drawings, specifications, and manuals. Experience in installation, commissioning, operation, and maintenance of industrial or commercial systems, equipment, or machinery. Proficiency in diagnostic and troubleshooting techniques, including the use of relevant tools, test equipment, and software. Knowledge of safety standards, regulations, and best practices in an industrial or engineering environment, with a commitment to safe work procedures. Effective communication and interpersonal skills for collaborating with client teams, technicians, and internal stakeholders. Ability to document work clearly, prepare technical reports, and maintain accurate records of maintenance activities and system performance. Organizational and time-management skills, with the capacity to prioritize tasks and manage multiple service requests at an on-site location. Relevant engineering degree or diploma, or equivalent technical qualification; professional certifications in maintenance or reliability engineering are an advantage. Prior experience in a resident or site-based engineering role, ideally within the United Arab Emirates or regional industrial sectors, is beneficial. Willingness to adhere to client policies, adapt to changing operational requirements, and continuously update

<ul><li><p>Carry out onboard / on-site inspection of marine and industrial boilers, including refinery, power plants and heavy industries (water tube, smoke tube, exhaust gas boilers and economizers, WHRB &HRSG), assess the condition of tubes, headers, drums, refractory, casing and mountings and identify the root cause of failures.</p></li><li><p>Determine the most effective repair solution (retubing, partial renewal, plugging, refractory repair, pressure part fabrication, etc.) and prepare a clear, costed work scope with material take-off, manpower plan and timeline.</p></li><li><p>Prepare and submit technical proposals, method statements, risk assessments and repair procedures in line with class society (DNV/ABS/LR), client and HSE requirements.</p></li><li><p>Independently lead the site execution team - supervisors, boiler makers, welders, fitters and subcontractors - ensuring quality of workmanship, welding/NDT compliance and adherence to schedule.</p></li><li><p>Plan and control project cost: track manpower, materials, consumables and subcontract spend against the estimate, control variations and protect project margin.</p></li><li><p>Prepare and maintain all project documentation: internal job orders, daily progress reports, inspection/measurement records, NDT and hydrotest reports, variation orders and final service/completion reports for client and class.</p></li><li><p>Coordinate with Sales & Estimation on scope clarifications and variation pricing and with Purchase on timely material and consumable availability.</p></li><li><p>Attend joint inspections with client representatives, class surveyors and port/refinery authorities; close out punch lists and secure final acceptance.</p></li><li><p>Enforce HSE compliance at site, including confined space entry, hot work permits and toolbox talks.</p></li><li><p>Support emergency/breakdown call-outs and ship repair mobilizations at short notice.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>B.Tech/B.E. in Mechanical Engineering (or equivalent). </p></li><li><p>Minimum 5 years' hands-on experience in marine and/or industrial boiler repair, ship repair or pressure part fabrication and erection.</p></li><li><p>Sound knowledge of boiler construction, welding processes (SMAW/GTAW), tube expansion, NDT methods and hydrostatic testing.</p></li><li><p>Working knowledge of AutoCAD (preparation of repair sketches and as-built drawings) is an added advantage.</p></li><li><p>Familiarity with class society rules and marine/industrial HSE standards.</p></li><li><p>Proficient in MS Office (Word, Excel) for reporting and cost tracking; strong written and spoken English.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Candidate able to read and interpret electrical symbols and diagram</p><p>Able to read and troubleshoot motor control diagrams</p><p>Have knowledge in PLC </p><p>Can Conduct preventive maintenance on the equipments</p><p>Have a good experience in food manufacturing equipments </p><p>Have a good troubleshooting and installation experience </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Good in electrical and mechanical troubleshooting and operation of manufacturing equipments</p><p></p></section>

<p>The Senior Mechanical Engineer is responsible for leading and managing mechanical engineering activities on construction projects, ensuring proper planning, execution, testing, and commissioning of mechanical systems and equipment in compliance with project specifications, approved drawings, applicable standards, quality requirements, and HSE practices. The role provides technical leadership, coordinates with stakeholders, and resolves complex engineering and site issues to achieve project objectives.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Lead and oversee installation, testing, pre-commissioning, and commissioning of mechanical equipment and systems.</p></li><li><p>Review and approve project specifications, drawings, shop drawings, material submittals, and technical documents to ensure compliance with scope and contract requirements.</p></li><li><p>Plan mechanical work activities and sequencing, ensuring availability of approved drawings, materials, equipment, and resources to meet project schedules.</p></li><li><p>Prepare, manage, and close Technical Queries (TQs/RFIs), deviations, concessions, waiver requests, and exemption lists.</p></li><li><p>Perform and review material take-offs (MTOs) and provide technical input to procurement and planning teams.</p></li><li><p>Coordinate with project teams, clients, consultants, subcontractors, vendors, and Third-Party Inspectors (TPI) to resolve technical and execution issues.</p></li><li><p>Identify scope changes or variations related to mechanical works and support technical discussions and agreements.</p></li><li><p>Prepare, review, and implement project procedures, method statements, Inspection and Test Plans (ITPs), and work instructions.</p></li><li><p>Provide onsite technical supervision and guidance during construction, installation, testing, and commissioning phases.</p></li><li><p>Monitor mechanical work progress, approvals, inspections, and readiness for handover.</p></li><li><p>Lead preparation of punch lists, mechanical completion, and close-out documentation.</p></li><li><p>Ensure compliance with applicable international codes and standards (ASME, API, AWS, ASTM, or equivalent).</p></li><li><p>Mentor junior engineers and support their technical development.</p></li><li><p>Ensure all mechanical activities comply with project HSE requirements, quality standards, and approved work practices.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree (BE / B Tech) in Mechanical Engineering.</p></li><li><p>10+ years experience in mechanical engineering roles within construction projects (preferable high-rise building projects).</p></li><li><p>Strong expertise in mechanical systems, equipment installation, and commissioning practices.</p></li><li><p>Proven ability to lead site activities and manage multidisciplinary coordination.</p></li><li><p>Strong understanding of international mechanical codes and standards relevant to project scope.</p></li><li><p>Proficient in reviewing and approving shop drawings and as-built drawings.</p></li><li><p>Excellent leadership, coordination, and communication skills.</p></li><li><p>Strong knowledge of construction HSE requirements, work practices, and quality systems.</p></li><li><p>Ability to manage multiple priorities in complex, fast-paced project environments.</p></li></ul>

<ul><li><p>The Technician role requires maintaining an up-to-date knowledge of the technical aspects of Toyota Material Handling Equipment. The primary objective is to diagnose and repair equipment effectively and efficiently, ensuring problems are resolved on the first attempt. Success in this role is measured by minimal repeat complaints, productivity reports, and effective communication with supervisors.</p></li></ul><p><br><strong>What You Will Do:</strong><br><br></p><p><strong>Mechanical and Electrical Repairs</strong></p><p><br></p><ul><li><p>Perform mechanical and electrical repairs, troubleshooting, and diagnosing of Toyota Material Handling Equipment with strong skills in diagnosing electric/BT/VNA issues.</p></li><li><p>Read, understand, and implement instructions in workshop manuals, utilizing service checklists where applicable to ensure minimal repeat complaints.</p></li></ul><p><br></p><p><strong>Problem Diagnosis and Solution Recommendation</strong></p><p><br></p><ul><li><p>Diagnose faults and recommend effective solutions, ensuring the issue is resolved correctly the first time to minimize repeat complaints.</p></li><li><p>Adopt best practices from service manuals to improve productivity and efficiency, reflected in productivity and efficiency reports.</p></li></ul><p><br></p><p><strong>Communication and Reporting</strong></p><p><br></p><ul><li><p>Maintain effective communication by ensuring all work done is explained to the Foreman/Service Supervisor.</p></li><li><p>Proactively identify potential problems while attending jobs, both in the workshop and in the field.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Required Skills To Be Successful:</strong><br><br></p><ul><li><p>Strong diagnostic skills in mechanical and electrical repairs.</p></li><li><p>Proficiency in reading and implementing workshop manual instructions.</p></li><li><p>Effective communication skills in English; knowledge of Arabic is an advantage.</p></li><li><p>Ability to maintain productivity and efficiency through best practices.</p></li></ul><p><br><strong>What Qualifies You For The Role:</strong><br><br></p><ul><li><p>Basic/Technical Education or Apprenticeship with a Trade Certificate/Diploma in Mechanical/Automobile Engineering.</p></li><li><p>Proven technical expertise in independently servicing, repairing, and overhauling components.</p></li><li><p>At least 5 years of experience with material handling equipment, preferably with Toyota/BT.</p></li><li><p>UAE driving license (manual) is mandatory.</p></li></ul></li></ul>

<p>A suitable candidate is required to supervise and coordinate MEP works at project sites, ensuring that electrical, mechanical, plumbing, and HVAC activities are completed safely, efficiently, and according to approved drawings and project requirements.</p> <p>Key Responsibilities<br /> Supervise daily MEP activities and site teams.<br /> Coordinate electrical, mechanical, plumbing, and HVAC works.<br /> Read and interpret MEP drawings, layouts, and technical specifications.<br /> Allocate tasks to technicians and workers and monitor their performance.<br /> Coordinate with engineers, subcontractors, and other site teams.<br /> Monitor installation, testing, commissioning, and maintenance activities.<br /> Ensure work is completed according to approved drawings and quality standards.<br /> Identify site issues and coordinate timely corrective actions.<br /> Monitor materials, tools, and equipment required for MEP works.<br /> Maintain daily site reports and work progress records.<br /> Ensure compliance with UAE safety procedures and site regulations.<br /> Conduct regular inspections and report any defects or deviations.<br /> Requirements<br /> Diploma or technical qualification in Mechanical, Electrical, MEP, or a related field.<br /> 3–5 years of relevant experience, preferably in the UAE.<br /> Good knowledge of MEP installation and maintenance works.<br /> Ability to read MEP drawings and technical documents.<br /> Good team leadership and coordination skills.<br /> Knowledge of workplace health and safety requirements.<br /> UAE driving license is an advantage.</p> <p>Interested candidates can submit their updated CV to: hr.1globalllc@gmail.com</p>

<p>A suitable candidate is required to supervise and coordinate MEP works at project sites, ensuring that electrical, mechanical, plumbing, and HVAC activities are completed safely, efficiently, and according to approved drawings and project requirements.</p> <p>Key Responsibilities<br /> Supervise daily MEP activities and site teams.<br /> Coordinate electrical, mechanical, plumbing, and HVAC works.<br /> Read and interpret MEP drawings, layouts, and technical specifications.<br /> Allocate tasks to technicians and workers and monitor their performance.<br /> Coordinate with engineers, subcontractors, and other site teams.<br /> Monitor installation, testing, commissioning, and maintenance activities.<br /> Ensure work is completed according to approved drawings and quality standards.<br /> Identify site issues and coordinate timely corrective actions.<br /> Monitor materials, tools, and equipment required for MEP works.<br /> Maintain daily site reports and work progress records.<br /> Ensure compliance with UAE safety procedures and site regulations.<br /> Conduct regular inspections and report any defects or deviations.<br /> Requirements<br /> Diploma or technical qualification in Mechanical, Electrical, MEP, or a related field.<br /> 3–5 years of relevant experience, preferably in the UAE.<br /> Good knowledge of MEP installation and maintenance works.<br /> Ability to read MEP drawings and technical documents.<br /> Good team leadership and coordination skills.<br /> Knowledge of workplace health and safety requirements.<br /> UAE driving license is an advantage.</p> <p>Interested candidates can submit their updated CV to: hr.1globalllc@gmail.com</p>

<ul><li><p>Coordinate and supervise Mechanical, Electrical, and Plumbing (MEP) works for residential and commercial projects.</p></li><li><p>Prepare, review, and approve MEP shop drawings, technical submittals, and material submittals.</p></li><li><p>Obtain and manage approvals from <strong>DEWA</strong> and <strong>Dubai Civil Defence (DCD)</strong>.</p></li><li><p>Ensure all MEP installations comply with local authority regulations, UAE codes, and project specifications.</p></li><li><p>Coordinate with architects, civil engineers, consultants, contractors, and government authorities.</p></li><li><p>Conduct site inspections and monitor project progress to ensure quality and timely completion.</p></li><li><p>Resolve technical issues related to MEP systems during design and construction</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Mechanical Engineering or Electrical Engineering.</p></li><li><p>Valid <strong>DEWA certification/approval</strong>.</p></li><li><p>Valid <strong>Dubai Civil Defence (DCD) certification/approval</strong>.</p></li><li><p>Minimum <strong>3–5 years of MEP engineering experience</strong> in the UAE.</p></li><li><p>Strong knowledge of UAE building codes and authority regulations.</p></li><li><p>Experience in residential and commercial building projects.</p></li><li><p>Proficiency in AutoCAD and Microsoft Office (knowledge of Revit is an advantage).</p></li></ul>

<p>• Develop detailed electrical design for high-voltage systems (11kV, 33kV, 132kV, and above) including single-line diagrams, cable schedules, control schematics, and layout drawings. • Perform load calculations, equipment sizing, cable sizing, and voltage drop analysis. • Prepare technical specifications and datasheets for HV equipment such as transformers, switchgears, circuit breakers, CTs, VTs, relays, and protection panels. • Design and review protection and control systems, including relay coordination and protection philosophy. • Interface with civil, mechanical, and instrumentation disciplines for interdisciplinary coordination. • Ensure compliance with IEC, IEEE, DEWA, SEC, or client-specific standards and codes. • Support in procurement activities by evaluating vendor offers, reviewing technical submissions, and performing FATs (Factory Acceptance Tests). • Prepare and review engineering documents, such as method statements, calculation notes, and test procedures. • Knowledge of simulation tools such as PVsyst, ETAP, and Dialux/ Equivalent software. • Familiar with International codes such as AS / NZS, IEC / EN, IEEE, BS, NFC and • Sizing/selection of PV module, SCB, Transformer, Inverter, HV/MV/LV switchgear/CRP Panel, Cable, Bus Bar/Duct, DG, UPS, Battery/Battery charger etc. • Participate in client and consultant meetings, and provide clarification on technical issues. </p><p>• Bachelor’s Degree in Electrical Engineering (Master’s is a plus). • Minimum 5–10 years of experience in HV electrical design within an EPC environment. • Strong knowledge of HV electrical systems, equipment, and industry practices. • Proficient in design tools such as ETAP, AutoCAD, DigSILENT, or similar software. • Familiarity with international codes and standards (IEC, IEEE, NEC, etc.). • Excellent written and verbal communication skills. • Ability to work in a fast-paced, team-oriented environment. </p>

<p>A reputable company is looking for MEP Supervisor to perform the following duties<br /> Supervise Mechanical, Electrical, and Plumbing (MEP) installation works on construction projects.<br /> Coordinate with engineers, contractors, and subcontractors to ensure project requirements are met.<br /> Monitor site activities to ensure work is completed according to approved drawings, specifications, and project schedules.<br /> Inspect MEP systems and ensure compliance with quality standards and UAE regulations.<br /> Identify and resolve technical and site-related issues promptly.<br /> Prepare daily progress reports and maintain project documentation.<br /> Ensure strict compliance with health, safety, and environmental (HSE) standards.<br /> Conduct inspections, testing, and commissioning of MEP systems.</p> <p>Applicants are required to complete the application form using the link below and upload their updated CV as part of the submission process.</p> <p>Application Form: https://forms.gle/JFbbBvkE6HzdEwGa6</p>

Role: Mechanical Engineering Specialist (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $50 - $70/hour<br>Role Overview:We are hiring for one of our clients, seeking a Mechanical Engineer to work on a contract basis. The role involves designing and optimizing mechanical systems for production environments. You will collaborate with cross-functional teams to ensure product reliability and performance.<br>Key Responsibilities:• Design and develop mechanical components and assemblies using CAD software.• Conduct finite element analysis (FEA) and computational fluid dynamics (CFD) simulations.• Prepare detailed engineering drawings and specifications for manufacturing.• Perform tolerance analysis and ensure compliance with industry standards.• Troubleshoot mechanical issues in existing systems and recommend improvements.<br>Required Skills & Qualifications:• Proficiency in CAD software such as Solid Works or Auto CAD is required.• Experience with FEA and CFD simulations is required.• Knowledge of mechanical design principles and manufacturing processes is required.• Ability to interpret technical drawings and specifications is required.• Strong problem-solving skills and attention to detail are required.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Engineering Services industry, contributing to the development of next-generation industrial equipment. Experience in a similar contract role will be considered an advantage.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

<p><strong>Job Summary:</strong><br></p><p>The Facility Engineer (MEP) is responsible for the operation, maintenance, and improvement of mechanical, electrical, and plumbing systems within the facility. This role ensures that all MEP systems are functioning efficiently, safely, and in compliance with applicable codes and standards. The Facility Engineer will coordinate with contractors, vendors, and internal teams to oversee inspections, preventive maintenance, troubleshooting, and repair activities.<br></p><p><strong>Key Responsibilities:</strong><br></p><p><strong>Operation & Maintenance</strong><br></p><p>Supervise and coordinate the daily operations and preventive maintenance of all MEP systems, including HVAC, fire protection, water supply, drainage, electrical systems, and backup generators.</p><p>Ensure uninterrupted functioning of critical services such as air conditioning, lighting, power distribution, and water systems.<br></p><p><strong>Troubleshooting & Repair</strong><br></p><p>Diagnose faults in mechanical, electrical, and plumbing systems and recommend/implement corrective actions.</p><p>Respond promptly to emergency calls related to system failures or malfunctions.<br></p><p><strong>Compliance & Safety</strong><br></p><p>Ensure all MEP systems comply with local codes, safety standards, and environmental regulations.</p><p>Conduct routine inspections and audits to ensure equipment is operating safely and efficiently.<br></p><p><strong>Vendor & Contractor Coordination</strong><br></p><p>Manage third-party service providers and contractors for maintenance, repair, or upgrade works.</p><p>Review technical submittals, drawings, and method statements related to MEP systems.<br></p><p><strong>Documentation & Reporting</strong><br></p><p>Maintain detailed records of maintenance activities, service logs, equipment manuals, and inspection reports. Generate reports on system performance, downtime, maintenance costs, and improvement plans.<br></p><p><strong>Energy Management</strong><br></p><p>Monitor energy and utility usage; recommend improvements to increase energy efficiency and reduce operating costs.</p><p>Assist in the planning and implementation of energy-saving initiatives.</p><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>3–5 years of experience in facilities management or MEP operations, preferably in commercial or industrial buildings.</p></li><li><p>Bachelor’s Degree in Mechanical, Electrical, or related Engineering discipline.</p></li><li><p>Strong knowledge of MEP systems (HVAC, electrical distribution, fire safety, water systems).</p></li><li><p>Familiarity with relevant codes and standards (ASHRAE, NFPA, DEWA, local regulations).</p></li><li><p>Proficient in AutoCAD, MS Office, and Building Management Systems (BMS).</p></li><li><p>Strong analytical, problem-solving, and communication skills.</p></li><li><p>Ability to work under pressure and respond to emergencies after hours if required.<br></p></li></ul><p><strong>Preferred Certifications:</strong><br></p><ul><li><p>Certified Facility Manager (CFM) – optional</p></li><li><p>LEED Accreditation – optional</p></li><li><p>Safety certifications (e.g., NEBOSH, OSHA)</p></li></ul>

Role: Research Engineer - Electrical, Mechanical & Chemical (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $80 - $90/hour<br>Role Overview:We are hiring for one of our clients, seeking a PhD Engineer (Electrical, Mechanical, Chemical) to work on a contract basis. The role involves developing and optimizing advanced engineering solutions across multiple disciplines to support high-impact projects. Candidates will collaborate with cross-functional teams to drive innovation and solve complex technical challenges in a remote-first environment.<br>Key Responsibilities:• Design, simulate, and validate electrical, mechanical, or chemical systems based on project requirements• Conduct theoretical modeling and experimental validation to ensure system performance and reliability• Develop and refine algorithms or processes to enhance efficiency and scalability of engineering solutions• Prepare technical reports, documentation, and presentations for stakeholders and leadership• Provide expert-level troubleshooting and optimization recommendations for existing systems<br>Required Skills & Qualifications:• PhD in Electrical, Mechanical, or Chemical Engineering from an accredited institution• Proven experience in applied research, system design, or process optimization in relevant engineering domains• Strong proficiency in simulation tools such as COMSOL, ANSYS, MATLAB, or SPICE• Demonstrated ability to translate theoretical concepts into practical, scalable engineering solutions• Experience with data analysis, statistics, and experimental design methodologies• Excellent written and verbal communication skills for technical documentation and stakeholder updates<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the research services industry, contributing to breakthroughs in high-tech engineering applications. The position provides exposure to cutting-edge projects with direct impact on product development and innovation cycles.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

<p>Responsible for the Process engineering of the Desalination, WTP, CCPP Project and in particular for the optimization of the technical solutions implemented.</p><p>Be familiar with Power Plant circulation cooling water system process and Hydraulic analysis. Process engineering design experience in Circulation Cooling Water detail design & Marine water in-taken will prefer.</p><p>Responsible for Power plant Once through Main cooling water mechanical system/process design including sea water intake, intake channel, sump design based on HI standard. Circulating water pump sizing, pipe sizing calculation. Open & closed sea water intake system design. Optimized intake, sump & pump configuration design/selection based on new bidding project tender requirement.</p><p>Develop optimized proposal through client specification review, preparation/ review of P&ID, equipment sizing, system layout, etc to win new projects.</p><p>Be familiar with developing the design of the cooling tower and condenser of power plant, Be able to make the optimization for them will be prefer.</p><p>Experience in CFD analysis & Physical model study of intake system will be preferred.</p><p>Provides expertise and technical support to the bidding support as necessary.</p><p>Sea water supply line and Power plant circulation cooling water trench simulation analysis experience will prefer.</p><p>Project bidding stage works: Review of Tender documents of new bidding project, come up with technical requirement breakdown, technical risk analysis, technical clarification/deviation with client, scope of work and terminal points, technical bidding criteria and assumptions, etc; Participant in the bidding Design Institute (DI) selection, project site visit; Coordinate with DI to prepare the Request for Quotation (RFQ), review OEM and Vendors’ technical proposal and Scope of Works (DOR); pre-bid & post-bid clarification with Client; Review equipment sizing, BOQ, performance guarantees prepared by DI, resolving the major technical issues, comparison and optimization of process equipment/system sizing & design; Organize internal pre-bidding review meeting; Review and finalize the technical bidding proposal. Draft the bidding experience summary after complete each project bidding works. Review of Tender documents to understand the scope of work, client specifications etc. and prepare technical offers, technical clarifications and list of deviations when required.</p><p>Responsible for review & preparation of proposal, basic and detail engineering for projects involving large size desalination, WTP & Combined Cycle Power plants.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor’s degree in Mechanical /Chemical engineering from an accredited college or university.</p><p>Major in Process /Mechanical Engineering/ Power Plant Engineering, Chemical or water treatment engineering, Or other majors related to power/water plant.</p><p>Over 8 years of experience in BOP process and mechanical design of CCPP, Thermal Power, SWRO.</p>

<p>We are seeking a dependable and innovative Junior Production Engineer to manage and optimize our manufacturing processes. </p><p>As a key member of our expanding team, you will oversee staff, enforce health and safety regulations, train employees in proper machinery use, identify and resolve production line issues, troubleshoot equipment, and handle various administrative responsibilities.</p><p>The ideal candidate will be an independent thinker and adept problem-solver. Exceptional production engineers excel in diagnosing issues, training team members, and offering actionable recommendations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Education:</strong> Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field.</li><li><strong>Experience:</strong> Previous experience in a manufacturing or production environment is preferred.</li><li><strong>Skills:</strong> Strong problem-solving abilities, technical aptitude, and familiarity with manufacturing processes and equipment.</li><li><strong>Communication:</strong> Excellent interpersonal skills with the ability to train and work effectively with team members.</li><li><strong>Attention to Detail:</strong> Ability to meticulously analyze processes and identify areas for improvement.</li></ul><br/><p>Please share your updated CV on petcorecruitment at gmail dot com</p>

<p>We are seeking a skilled Heavy Truck Driver to join our team. The ideal candidate will be responsible for safely transporting goods across various destinations within the UAE, ensuring timely deliveries while adhering to all traffic and safety regulations. Responsibilities: - Operate heavy trucks to transport goods safely and efficiently across designated routes. - Perform routine inspections and maintenance checks on the vehicle before and after trips. - Ensure all cargo is securely loaded and complies with safety standards. - Comply with all local traffic laws and company policies during transportation. - Communicate effectively with team members regarding scheduling and route changes. - Report any accidents, delays, or incidents promptly to the management.</p><p>- Valid UAE heavy vehicle license (Category 4) , with a clean driving record. - Proven experience as a heavy truck driver, preferably within the UAE or similar markets, experience in driving Trailer/Bogie. - Good knowledge of traffic laws and safety protocols in the UAE. - Ability to handle long driving hours and navigate through various routes across the region. - Strong attention to safety and detail orientation. - Physically fit and able to manage the demands of loading/unloading or vehicle maintenance checks. - Punctual, reliable, and professional work attitude.</p>

<p>We are seeking a skilled Heavy Truck Driver to join our team. The ideal candidate will be responsible for safely transporting goods across various destinations within the UAE, ensuring timely deliveries while adhering to all traffic and safety regulations. Responsibilities: - Operate heavy trucks to transport goods safely and efficiently across designated routes. - Perform routine inspections and maintenance checks on the vehicle before and after trips. - Ensure all cargo is securely loaded and complies with safety standards. - Comply with all local traffic laws and company policies during transportation. - Communicate effectively with team members regarding scheduling and route changes. - Report any accidents, delays, or incidents promptly to the management.</p><p>- Valid UAE heavy vehicle license (Category 4) , with a clean driving record. - Proven experience as a heavy truck driver, preferably within the UAE or similar markets, experience in driving Trailer/Bogie. - Good knowledge of traffic laws and safety protocols in the UAE. - Ability to handle long driving hours and navigate through various routes across the region. - Strong attention to safety and detail orientation. - Physically fit and able to manage the demands of loading/unloading or vehicle maintenance checks. - Punctual, reliable, and professional work attitude.</p>

<ul><li><p>Safely operate heavy buses for staff or passenger transportation.</p></li><li><p>Follow assigned routes and schedules efficiently.</p></li><li><p>Ensure the safety and comfort of passengers at all times.</p></li><li><p>Conduct daily vehicle inspections before and after trips.</p></li><li><p>Report any vehicle defects, accidents, or maintenance requirements immediately.</p></li><li><p>Maintain cleanliness and proper condition of the bus.</p></li><li><p>Follow UAE traffic rules and company policies strictly.</p></li><li><p>Keep accurate trip and fuel records when required.</p></li><li><p>Assist passengers in a professional and respectful manner.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Requirements</p><ul><li><p>Valid UAE Heavy Bus Driving License No. 6.</p></li><li><p>Minimum 2 years of heavy bus driving experience in the UAE.</p></li><li><p>Good communication skills in English.</p></li><li><p>Basic knowledge of vehicle maintenance and safety checks.</p></li><li><p>Good knowledge of UAE roads and traffic regulations.</p></li><li><p>Physically fit and able to work flexible shifts.</p></li><li><p>Strong sense of responsibility and punctuality.</p></li></ul><p>Preferred Skills</p><ul><li><p>Defensive driving skills.</p></li><li><p>Good customer service attitude.</p></li><li><p>Ability to handle emergency situations calmly and professionally.</p></li></ul><p>Education</p><ul><li><p>High School certificate or equivalent preferred.</p></li></ul><p>Location</p><p>Dubai, UAE</p></li></ul>

<ul><li><p>Safely operate heavy buses for staff or passenger transportation.</p></li><li><p>Follow assigned routes and schedules efficiently.</p></li><li><p>Ensure the safety and comfort of passengers at all times.</p></li><li><p>Conduct daily vehicle inspections before and after trips.</p></li><li><p>Report any vehicle defects, accidents, or maintenance requirements immediately.</p></li><li><p>Maintain cleanliness and proper condition of the bus.</p></li><li><p>Follow UAE traffic rules and company policies strictly.</p></li><li><p>Keep accurate trip and fuel records when required.</p></li><li><p>Assist passengers in a professional and respectful manner.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Requirements</p><ul><li><p>Valid UAE Heavy Bus Driving License No. 6.</p></li><li><p>Minimum 2 years of heavy bus driving experience in the UAE.</p></li><li><p>Good communication skills in English.</p></li><li><p>Basic knowledge of vehicle maintenance and safety checks.</p></li><li><p>Good knowledge of UAE roads and traffic regulations.</p></li><li><p>Physically fit and able to work flexible shifts.</p></li><li><p>Strong sense of responsibility and punctuality.</p></li></ul><p>Preferred Skills</p><ul><li><p>Defensive driving skills.</p></li><li><p>Good customer service attitude.</p></li><li><p>Ability to handle emergency situations calmly and professionally.</p></li></ul><p>Education</p><ul><li><p>High School certificate or equivalent preferred.</p></li></ul><p>Location</p><p>Dubai, UAE</p></li></ul>