Low Voltage Cable Jointer in UAE

<ol><li><p>Coordinate and supervise MEP installation activities at project sites.</p></li><li><p>Review project specifications, drawings, BOQs, equipment schedules, and technical requirements.</p></li><li><p>Coordinate mechanical, electrical, HVAC, plumbing, drainage, firefighting, fire alarm, ELV, BMS, and other MEP systems as applicable.</p></li><li><p>Review MEP shop drawings, design calculations, material submittals, method statements, and technical documents.</p></li><li><p>Ensure MEP installations are carried out in accordance with approved drawings, specifications, method statements, and applicable standards.</p></li><li><p>Coordinate with civil, structural, architectural, and other engineering teams to resolve technical interfaces and avoid clashes.</p></li><li><p>Participate in BIM coordination and assist in identifying and resolving MEP clashes before and during site execution.</p></li><li><p>Coordinate with consultants, clients, subcontractors, suppliers, and site teams on MEP-related technical matters.</p></li><li><p>Monitor site installation activities and ensure work is progressing according to approved schedules and project requirements.</p></li><li><p>Inspect installation of HVAC equipment, ductwork, piping, pumps, electrical systems, panels, cable trays, plumbing systems, firefighting systems, and associated equipment.</p></li><li><p>Verify equipment installation, alignment, supports, access, clearances, and connections as per approved drawings and manufacturer recommendations.</p></li><li><p>Coordinate with QA/QC teams for inspections, testing, documentation, and closure of NCRs and observations.</p></li><li><p>Prepare and respond to RFIs, technical queries, site instructions, and design clarifications.</p></li><li><p>Review vendor drawings, technical data sheets, equipment schedules, and material compliance documents.</p></li><li><p>Coordinate with procurement teams to ensure timely availability of approved MEP materials and equipment.</p></li><li><p>Monitor material deliveries and verify that materials received at site comply with approved submittals and specifications.</p></li><li><p>Assist in preparing and maintaining MEP work schedules, progress reports, and installation records.</p></li><li><p>Monitor subcontractor activities and ensure compliance with approved drawings, specifications, quality requirements, and HSE procedures.</p></li><li><p>Coordinate testing and commissioning activities for MEP systems.</p></li><li><p>Assist in preparing testing and commissioning procedures, checklists, test reports, and performance records.</p></li><li><p>Coordinate functional testing and integrated system testing where required.</p></li><li><p>Coordinate with relevant UAE authorities and utility providers for inspections, approvals, testing, and connections as applicable.</p></li><li><p>Ensure MEP works comply with relevant UAE regulations, authority requirements, project specifications, and applicable international standards.</p></li><li><p>Assist in identifying technical issues, construction constraints, and potential delays and coordinate appropriate corrective actions.</p></li><li><p>Support the Project Manager/Senior Engineer in monitoring progress, resources, materials, and subcontractor performance.</p></li><li><p>Ensure proper implementation of HSE requirements, risk assessments, permit-to-work procedures, and safe working practices.</p></li><li><p>Participate in site inspections, snagging, rectification, testing, commissioning, and final handover activities.</p></li><li><p>Ensure completion of as-built drawings, O&M manuals, warranties, test certificates, inspection records, and other handover documents.</p></li><li><p>Provide technical guidance to supervisors and site teams on MEP installation requirements.</p></li><li><p>Identify opportunities for improving system performance, constructability, energy efficiency, and cost effectiveness.</p></li><li><p>Maintain proper engineering records and ensure all MEP documentation is updated and controlled.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Good knowledge of MEP design, installation, testing, and commissioning.</p></li><li><p>Understanding of HVAC, electrical, plumbing, drainage, firefighting, fire alarm, ELV, and BMS systems.</p></li><li><p>Ability to read and interpret MEP drawings, schematics, specifications, BOQs, and technical documents.</p></li><li><p>Good understanding of multidisciplinary coordination and MEP clash detection.</p></li><li><p>Knowledge of BIM coordination processes will be an advantage.</p></li><li><p>Familiarity with UAE MEP codes, authority requirements, and construction practices.</p></li><li><p>Good knowledge of QA/QC and HSE requirements.</p></li><li><p>Strong site supervision and subcontractor coordination skills.</p></li><li><p>Good technical problem-solving and analytical abilities.</p></li><li><p>Strong communication and interpersonal skills.</p></li><li><p>Proficiency in AutoCAD and MS Office.</p></li><li><p>Familiarity with relevant MEP design and engineering software is preferred.</p></li><li><p>Knowledge of Primavera P6/MS Project will be an advantage.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Bachelor’s degree in <strong>Mechanical Engineering, Electrical Engineering, MEP Engineering, or a related discipline</strong>.</p></li><li><p><strong>5–8 years of relevant experience</strong> in MEP engineering, installation, coordination, or construction.</p></li><li><p>Experience in large-scale building, infrastructure, commercial, residential, hospitality, industrial, or EPC projects is preferred.</p></li><li><p>Hands-on experience with MEP installation, inspection, testing, and commissioning.</p></li><li><p>Experience coordinating with consultants, clients, subcontractors, vendors, and multidisciplinary project teams.</p></li><li><p>UAE/GCC experience is preferred.</p></li><li><p>Experience working on projects in <strong>Dubai and Abu Dhabi</strong> will be an advantage.</p></li><li><p>Relevant professional engineering or MEP certifications will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Timely execution of MEP installation activities.</p></li><li><p>Compliance with approved drawings, specifications, and authority requirements.</p></li><li><p>Quality and coordination of MEP installations.</p></li><li><p>Effective resolution of technical and multidisciplinary interface issues.</p></li><li><p>Timely completion of testing and commissioning activities.</p></li><li><p>Effective subcontractor and material coordination.</p></li><li><p>Compliance with HSE requirements.</p></li><li><p>Complete and accurate project documentation and handover records.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<ul><li><p>Develop and maintain BIM models for civil, structural, electrical, MEP, and associated power-project disciplines.</p></li><li><p>Prepare and update 3D models based on approved engineering drawings, specifications, and project requirements.</p></li><li><p>Coordinate multidisciplinary BIM models to identify and resolve clashes and design interfaces.</p></li><li><p>Create and maintain coordinated BIM models for substations, control buildings, utility buildings, infrastructure, and associated facilities.</p></li><li><p>Develop detailed BIM models for architectural, structural, civil, electrical, mechanical, and MEP systems as required.</p></li><li><p>Review engineering drawings and technical documentation and translate design information into accurate BIM models.</p></li><li><p>Perform clash detection and coordination using appropriate BIM software and prepare clash reports for resolution.</p></li><li><p>Coordinate with Civil, Structural, Electrical, MEP, Design, Engineering, Construction, Planning, and QA/QC teams to resolve BIM-related issues.</p></li><li><p>Ensure BIM models are developed and maintained in accordance with approved BIM Execution Plans, project standards, naming conventions, Level of Development (LOD), and data requirements.</p></li><li><p>Prepare coordinated shop drawings, construction drawings, layouts, sections, details, schedules, and BIM-based deliverables.</p></li><li><p>Update models based on approved design changes, RFIs, site modifications, and construction updates.</p></li><li><p>Support construction teams by providing coordinated BIM information, layouts, drawings, and model-based solutions.</p></li><li><p>Coordinate BIM models with site conditions and identify potential constructability issues before construction.</p></li><li><p>Support quantity take-offs and extraction of material quantities from BIM models where required.</p></li><li><p>Assist in developing 4D/5D BIM deliverables by integrating model information with project schedules and cost data where applicable.</p></li><li><p>Maintain BIM model accuracy, integrity, version control, and document revision history.</p></li><li><p>Ensure all BIM deliverables comply with project-specific standards, client requirements, and applicable industry practices.</p></li><li><p>Coordinate with consultants, subcontractors, suppliers, and specialist BIM teams for model integration and information exchange.</p></li><li><p>Participate in BIM coordination meetings, design reviews, constructability workshops, and technical coordination sessions.</p></li><li><p>Prepare and maintain clash detection reports, model review reports, BIM registers, and coordination records.</p></li><li><p>Review and validate BIM models received from consultants, contractors, vendors, and subcontractors.</p></li><li><p>Support preparation of as-built BIM models based on approved construction records and site changes.</p></li><li><p>Ensure proper information management and timely submission of BIM deliverables through the project Common Data Environment (CDE).</p></li><li><p>Assist in developing BIM standards, templates, families, libraries, and workflows as required.</p></li><li><p>Provide technical support and guidance to project teams on BIM processes and model coordination.</p></li><li><p>Maintain accurate BIM documentation, model registers, drawing registers, and coordination records.</p></li><li><p>Support project handover by preparing final BIM models, asset information, and as-built documentation.</p></li><li><p>Identify opportunities to improve BIM workflows, coordination efficiency, design quality, and construction productivity.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree or Diploma in Civil Engineering, Architecture, Mechanical Engineering, Electrical Engineering, BIM, or a related discipline.</p></li><li><p>Typically 3–7 years of relevant BIM experience, preferably in power, infrastructure, EPC, construction, or engineering projects.</p></li><li><p>Strong experience in developing and coordinating multidisciplinary BIM models.</p></li><li><p>Proficiency in Autodesk Revit, Navisworks, AutoCAD, and other relevant BIM software.</p></li><li><p>Experience with BIM coordination, clash detection, model review, and construction documentation.</p></li><li><p>Good understanding of BIM workflows, BIM Execution Plans, LOD requirements, model coordination, and information management.</p></li><li><p>Ability to read and interpret civil, structural, electrical, mechanical, MEP, and architectural drawings.</p></li><li><p>Knowledge of multidisciplinary design coordination and construction interfaces.</p></li><li><p>Experience working with Common Data Environments (CDE) and document management systems.</p></li><li><p>Understanding of BIM standards and practices such as ISO 19650 is preferred.</p></li><li><p>Knowledge of 4D/5D BIM, quantity take-offs, and model-based project controls will be an advantage.</p></li><li><p>Strong attention to detail and ability to identify design clashes and coordination issues.</p></li><li><p>Good communication, coordination, analytical, and problem-solving skills.</p></li><li><p>Ability to work effectively with engineers, designers, consultants, contractors, and project teams.</p></li><li><p>Proficiency in MS Office and BIM documentation/reporting tools.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power substations, transmission/distribution projects, utility infrastructure, or major EPC projects.</p></li><li><p>Experience developing BIM models for HV/EHV substations, control buildings, cable trenches, equipment foundations, and associated infrastructure.</p></li><li><p>Experience coordinating electrical and MEP services within substation and control-building environments.</p></li><li><p>Experience with Autodesk Revit, Navisworks Manage, Civil 3D, AutoCAD, and BIM 360/ACC or equivalent platforms.</p></li><li><p>Familiarity with UAE/GCC BIM requirements and client-specific BIM standards.</p></li><li><p>Experience with major EPC contractors, engineering consultants, and utility clients will be an advantage.</p></li><li><p>BIM certification or training in Revit, Navisworks, ISO 19650, or equivalent will be preferred.</p></li></ul><br><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Interface Manager - Offshore , Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Interface Manager - Offshore </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>The Interface Manager is responsible for identifying, managing, coordinating, and resolving all internal and external project interfaces associated with ADNOC Offshore projects. The role ensures seamless communication and integration between ADNOC Offshore, PMC, EPC contractors, subcontractors, vendors, licensors, and third-party stakeholders to achieve safe, timely, and cost-effective project delivery.</b></p><br><br><p><b>The Interface Manager plays a critical role in mitigating interface risks, preventing scope gaps, avoiding schedule delays, and ensuring alignment across multidisciplinary teams throughout engineering, procurement, construction, installation, commissioning, and startup phases.</b></p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Interface Management</b></p><br><br><ul><li><b>Develop, implement, and maintain the Project Interface Management Plan.</b></li><li><b>Establish and manage the Interface Register for all project interfaces.</b></li><li><b>Identify and track internal and external interfaces throughout the project lifecycle.</b></li><li><b>Ensure effective coordination between engineering, procurement, construction, commissioning, and operations teams.</b></li><li><b>Facilitate resolution of interface issues and escalate critical matters when required.</b></li></ul><br><p><b>Client &amp; Stakeholder Coordination</b></p><br><br><ul><li><b>Serve as the primary focal point for interface matters with:</b><ul><li><b>ADNOC Offshore</b></li><li><b>Project Management Consultant (PMC)</b></li><li><b>EPC Contractors</b></li><li><b>Vendors and Suppliers</b></li><li><b>Subcontractors</b></li><li><b>Operations and Asset Teams</b></li><li><b>Regulatory Authorities</b></li></ul></li><li><b>Manage stakeholder expectations and ensure effective communication across all parties.</b></li><li><b>Organize and lead interface coordination meetings.</b></li></ul><br><p><b>Engineering Interface Management</b></p><br><br><ul><li><b>Coordinate multidisciplinary engineering interfaces including:</b><ul><li><b>Process</b></li><li><b>Mechanical</b></li><li><b>Piping</b></li><li><b>Electrical</b></li><li><b>Instrumentation</b></li><li><b>Telecom</b></li><li><b>Civil &amp; Structural</b></li></ul></li><li><b>Ensure interface requirements are clearly defined and communicated.</b></li><li><b>Monitor engineering deliverables affecting interface points and ensure timely closure of actions.</b></li><li><b>Coordinate management of technical queries and design clarifications.</b></li></ul><br><p><b>Offshore &amp; Brownfield Interface Coordination</b></p><br><br><ul><li><b>Manage interfaces related to:</b><ul><li><b>Existing ADNOC Offshore facilities</b></li><li><b>Brownfield modifications</b></li><li><b>Offshore platforms</b></li><li><b>Subsea facilities</b></li><li><b>Pipelines and cable systems</b></li><li><b>SIMOPS activities</b></li><li><b>Shutdown and tie-in works</b></li></ul></li><li><b>Coordinate with Operations and Asset Teams to ensure minimal disruption to production facilities.</b></li></ul><br><p><b>Project Controls &amp; Risk Management</b></p><br><br><ul><li><b>Monitor interface-related risks and opportunities.</b></li><li><b>Ensure interface activities are incorporated into project schedules.</b></li><li><b>Track interface deliverables and milestones.</b></li><li><b>Develop mitigation plans for potential interface conflicts.</b></li><li><b>Support project risk assessments and management reviews.</b></li></ul><br><p><b>Change Management</b></p><br><br><ul><li><b>Support Management of Change (MOC) processes for interface-related modifications.</b></li><li><b>Evaluate interface impacts arising from design changes, scope changes, and technical deviations.</b></li><li><b>Ensure all interface changes are properly documented and communicated.</b></li></ul><br><p><b>Procurement &amp; Vendor Management</b></p><br><br><ul><li><b>Coordinate interfaces between EPC teams and equipment suppliers.</b></li><li><b>Review vendor deliverables affecting multiple project disciplines.</b></li><li><b>Ensure timely resolution of vendor technical issues impacting project execution.</b></li><li><b>Support expediting and procurement teams on critical interface matters.</b></li></ul><br><p><b>Construction &amp; Commissioning Support</b></p><br><br><ul><li><b>Coordinate construction-related interfaces between contractors and ADNOC Offshore operational assets.</b></li><li><b>Ensure interface requirements are addressed before mechanical completion and commissioning.</b></li><li><b>Support pre-commissioning, commissioning, startup, and handover activities.</b></li><li><b>Coordinate tie-in and shutdown interface planning.</b></li></ul><br><p><b>Documentation &amp; Reporting</b></p><br><br><ul><li><b>Maintain comprehensive interface registers and action trackers.</b></li><li><b>Prepare interface management reports and dashboards.</b></li><li><b>Track interface KPIs and progress status.</b></li><li><b>Present interface performance updates to project leadership and ADNOC Offshore representatives.</b></li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li><b>Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, Chemical, or equivalent).</b></li><li><b>Master's Degree in Engineering or Project Management is an advantage.</b></li></ul><br><p><b>Experience</b></p><br><br><ul><li><b>Minimum 15 years of Oil &amp; Gas experience.</b></li><li><b>Minimum 8 years of experience in Interface Management, Project Engineering, Engineering Management, or Project Management roles.</b></li><li><b>Proven experience in ADNOC Offshore, ADNOC Onshore, Saudi Aramco, QatarEnergy, or major offshore EPC projects.</b></li><li><b>Experience with large-scale offshore brownfield and greenfield developments.</b></li><li><b>Demonstrated experience in managing complex stakeholder interfaces.</b></li></ul><br><p><b>Technical Knowledge</b></p><br><br><p><b>Mandatory</b></p><br><br><ul><li><b>ADNOC Offshore specifications and project execution requirements.</b></li><li><b>EPC/EPCM project execution methodologies.</b></li><li><b>Interface Management Systems and processes.</b></li><li><b>Brownfield and greenfield offshore developments.</b></li><li><b>Offshore facilities, pipelines, subsea systems, and platforms.</b></li><li><b>Project scheduling and risk management principles.</b></li><li><b>Management of Change (MOC) processes.</b></li><li><b>SIMOPS coordination and shutdown planning.</b></li></ul><p><b>Preferred</b></p><br><br><p><b>Experience with:</b></p><br><br><ul><li><b>Primavera P6</b></li><li><b>Aconex</b></li><li><b>AVEVA Engineering</b></li><li><b>SmartPlant (SP3D)</b></li><li><b>E3D</b></li><li><b>Navisworks</b></li><li><b>TeamBinder</b></li><li><b>Interface Management Databases/Tools</b></li></ul><br><p><b>Key Competencies</b></p><br><br><p><b>Leadership &amp; Management</b></p><br><br><ul><li><b>Stakeholder Management</b></li><li><b>Team Leadership</b></li><li><b>Conflict Resolution</b></li><li><b>Negotiation Skills</b></li></ul><p><b>Technical</b></p><br><br><ul><li><b>Interface Management</b></li><li><b>Engineering Coordination</b></li><li><b>Project Integration</b></li><li><b>Risk Identification &amp; Mitigation</b></li></ul><p><b>Behavioral</b></p><br><br><ul><li><b>Excellent Communication Skills</b></li><li><b>Problem Solving</b></li><li><b>Analytical Thinking</b></li><li><b>Decision Making</b></li><li><b>Cross-functional Collaboration</b></li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><strong>Requisition Number:</strong> 24479BR<br><strong>Description:</strong><br>Stantec is looking for a Lighting Designer.<br>The position requires a balanced combination of technical design capability and professional competencies. Responsibilities include delivery of core design activities such as photometric design and analysis, lighting controls and BMS integration, façade and landscape lighting, energy efficient and sustainable design solutions, and luminaire specification. The role also requires effective client engagement, clear communication and presentation of design intent, coordination with other disciplines, management of programs and deliverables, and contribution to team development, mentoring.<br>Key Accountabilities and Responsibilities:<br>Architectural &amp; Interior Lighting<br>• Develop and lead lighting design concepts from early schematic stage through to construction documentation and site completion.<br>• Prepare detailed photometric calculations, lighting layouts, luminaire schedules, dimming control schematics, and specifications using AGi32, DIALux Evo, or Relux.<br>• Design DALI-2, DMX/RDM, Casambi, and KNX lighting control systems integrated with BMS and smart building platforms.<br>• Select and specify architectural luminaires, custom fittings, and decorative light art pieces in close collaboration with interior designers and architects.<br>• Prepare lighting mood boards, rendered visualisations, and design narratives for client presentations and design development approvals.<br>• Coordinate with structural, MEP, and joinery contractors on recessed, integrated, and concealed lighting details.<br>Landscape &amp; Exterior Lighting<br>• Design exterior lighting schemes for public realms, podium landscapes, water features, hardscape, softscape, and building façades.<br>• Develop façade lighting strategies including architectural wash lighting, gobo projection, dynamic color schemes, and media façade integration.<br>• Coordinate with civil, landscape, and irrigation teams on underground cable routes, IP-rated fixture details, and maintenance access.<br>• Specify and design sports lighting layouts for multi-purpose outdoor courts, playing fields, and recreation facilities.<br>• Ensure all outdoor lighting complies with light pollution, sky glow, and obtrusive light guidelines as applicable.<br>Standards, Compliance &amp; Sustainability<br>• Ensure designs comply with CIBSE SLL Lighting Guides, IES Recommended Practices, ASHRAE 90.1 lighting power density limits, and local authority requirements (DCD, DDA, QCD, etc.).<br>• Integrate daylighting strategies (daylight harvesting, occupancy controls, circadian lighting) to support LEED, Estidama, and WELL certification targets.<br>• Calculate lighting energy use intensity (LUI) and produce IDA/IESNA compliant obtrusive lighting reports where required.<br>Client &amp; Project Delivery<br>▪ Act as the primary lighting consultant point of contact for clients, architects, and contractors throughout the project lifecycle.<br>▪ Manage lighting design deliverables to program and budget, coordinating with multi-discipline project teams.<br>▪ Support business development through technical proposals, client presentations, and attendance at project interviews.<br>▪ Mentor junior lighting designers and contribute to practice quality standards and luminaire library development.<br><strong>Qualifications:</strong><br>▪ Bachelor's degree in Architectural Engineering, Electrical Engineering, Architecture, or Interior Design (with strong technical lighting component).<br>▪ Minimum 8 -12 years of dedicated lighting design experience, with at least 5 years on projects in the Middle East or Gulf region.<br>▪ Portfolio demonstrating completed projects across hospitality, cultural, retail, or mixed-use sectors at a senior design level.<br>▪ Accredited Lighting Designer (ALD), IALD Member or Associate, or LC (Lighting Certified — NCQLP) designation preferred.<br>▪ Experience with luxury hospitality or high-end residential projects is a strong advantage.<br>Competencies:<br>▪ Lighting calculation: AGi32, DIALux Evo, Relux advanced proficiency required.<br>▪ CAD &amp; BIM: AutoCAD (advanced), Revit MEP (lighting families), SketchUp for quick visualisations.<br>▪ Visualisation: Relux, Dialux rendering, or basic working knowledge of Enscape / Lumion for design communication.<br>▪ Controls: DALI-2, DMX/RDM, KNX, Casambi, Helvar, Lutron, Crestron lighting control systems.<br>▪ MS Office (Excel luminaire schedules, PowerPoint client presentations); Adobe Creative Suite advantageous.<br><strong>About Stantec:</strong><br>We’re active members of the communities we serve. That’s why at Stantec we always design with community in mind. We believe growing a great design company happens from the inside out. We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary.<br>The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents. We collaborate across disciplines and industries to bring projects to life. Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work. Redefine your personal best. Join us!<br><strong>Work Location(s):United Arab Emirates-Dubai</strong><br><strong>Employment Type:</strong> <strong>Full-Time</strong><br><strong>Job Type:</strong> <strong>Regular</strong><br><strong>Job Category:</strong> <strong>Electrical Engineering</strong></span> </div>

SMTnet»Career Center»Jobs»In-Circuit Test (ICT) & Reverse Engineering Technician<br><br>In-Circuit Test (ICT) & Reverse Engineering Technician<br><br>Date Posted<br><br>August 3, 2026<br><br>Job Category<br><br>Engineering Technical Support<br><br>Company Division<br><br>GAEP Electronics<br><br>Location:<br><br>Dubai, Dubai, United Arab Emirates<br><br>Job Description<br><br>In-Circuit Test (ICT) & Reverse Engineering Technician<br><br>Location: Middle East (stationed in Dubai)<br><br>Company: GAEP Electronics – Authorized Representative of Seica<br><br>GAEP Electronics is seeking an experienced In-Circuit Test (ICT) & Reverse Engineering Technician to join our growing Electronics Manufacturing team. The successful candidate will support customers with PCB testing, fixture development, reverse engineering, and production test solutions using Seica's advanced flying probe and ICT platforms.<br><br>Key Responsibilities<br><br>Develop, debug, and optimize In-Circuit Test (ICT) programs. Create and maintain flying probe test programs for PCB assemblies. Perform PCB reverse engineering for legacy and undocumented boards. Generate schematics, BOMs, and netlists from assembled PCBs. Analyze failures and troubleshoot electronic assemblies down to component level. Develop test strategies for prototype, NPI, and low-volume/high-mix production. Support fixture design and validation. Collaborate with customers to improve test coverage and manufacturing quality. Produce technical documentation and test reports. Provide on-site commissioning, training, and technical support when required.<br><br>Requirements<br><br>Diploma or Bachelor's degree in Electronics Engineering or related field. Minimum 3 years of experience in PCB testing, ICT, flying probe testing, or electronics manufacturing. Strong understanding of analog and digital electronics. Experience reading schematics, PCB layouts, and Gerber files. Experience with reverse engineering tools and electronic measurement equipment. Knowledge of boundary scan (JTAG), functional testing, and manufacturing test methodologies is an advantage. Familiarity with SMT manufacturing processes and IPC standards. Excellent troubleshooting and analytical skills. Willingness to travel for customer support and project implementation.<br><br>Preferred Experience<br><br>Seica Flying Probe Test Systems In-Circuit Testing (ICT) Reverse Engineering PCB Failure Analysis Functional Test JTAG / Boundary Scan AOI / AXILow-Volume High-Mix Manufacturing Electronics Manufacturing Services (EMS)<br><br>Join GAEP Electronics and work with cutting-edge Seica technologies while supporting some of the region's most advanced electronics manufacturers.<br><br>More electronics manufacturing jobs »<br><br>SMT Field Service Engineer | Dallas, TX, USA | Hanwha Semitech Americas, Inc. Technical Content Writer – PCB & Electronics Manufacturing | Shenzhen, 30, China | PCBCool Quality expert | Shenzhen, 30, China | RGBSISee all jobs »<br><br>Company Information<br><br>See Company Website »<br><br>Company Postings<br><br> job posting<br><br>In-Circuit Test (ICT) & Reverse Engineering Technician job listing has been viewed times<br><br>SMTnet»Career Center»Jobs»In-Circuit Test (ICT) & Reverse Engineering Technician

Role: Performance Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $70-$110 / hr<br>Role Overview:We are hiring for one of our clients, seeking a SWE (C++, Python, Rust) to contribute to the development of advanced large language models. The role involves hands-on technical work to elevate the quality of AI training and inference infrastructure through performance engineering.<br>Key Responsibilities:• Guide research and engineering teams to improve AI model performance in systems-level optimization, compiler engineering, and runtime performance.• Design challenging, domain-relevant tasks across multiple specializations and write accurate solutions to performance engineering problems.• Evaluate performance engineering tasks and solutions, providing clear, written technical feedback.• Develop guidelines and detailed evaluation frameworks to assess systems design quality across AI workloads.• Collaborate with subject matter experts to ensure consistency and accuracy in training data for frontier AI systems.<br>Required Skills & Qualifications:• 2+ years of professional experience in performance engineering, systems programming, or low-level optimization.• Deep hands-on expertise in at least one of C++, Python, or Rust with working familiarity across the others.• Demonstrated track record of measurable performance improvements on production systems (e.g., latency reduction, throughput gains, memory footprint optimization).• Experience writing and assessing performance-engineering tasks and solutions for AI model training and evaluation.• Ability to develop technical guidelines and rubrics for evaluating systems design quality in AI workloads.<br>More About the Opportunity:This role offers a unique opportunity to work with a leading AI lab, contributing to the development of cutting-edge generative AI systems. The position is a full-time W-2 engagement with no conflicts, providing stability while working on impactful technical challenges.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $70-$110 / hr<br>Role Overview:We are hiring for one of our clients, seeking a SWE (C++, Python, Rust) to contribute to the development of advanced large language models. The role involves hands-on technical work to elevate the quality of AI training and inference infrastructure through performance engineering.<br>Key Responsibilities:• Guide research and engineering teams to improve AI model performance in systems-level optimization, compiler engineering, and runtime performance.• Design challenging, domain-relevant tasks across multiple specializations and write accurate solutions to performance engineering problems.• Evaluate performance engineering tasks and solutions, providing clear, written technical feedback.• Develop guidelines and detailed evaluation frameworks to assess systems design quality across AI workloads.• Collaborate with subject matter experts to ensure consistency and accuracy in training data for frontier AI systems.<br>Required Skills & Qualifications:• 2+ years of professional experience in performance engineering, systems programming, or low-level optimization.• Deep hands-on expertise in at least one of C++, Python, or Rust with working familiarity across the others.• Demonstrated track record of measurable performance improvements on production systems (e.g., latency reduction, throughput gains, memory footprint optimization).• Experience writing and assessing performance-engineering tasks and solutions for AI model training and evaluation.• Ability to develop technical guidelines and rubrics for evaluating systems design quality in AI workloads.<br>More About the Opportunity:This role offers a unique opportunity to work with a leading AI lab, contributing to the development of cutting-edge generative AI systems. The position is a full-time W-2 engagement with no conflicts, providing stability while working on impactful technical challenges.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

<p>We are recruiting for a Head of Propulsion to join a greenfield aerospace programme based in Dubai. This is a senior engineering leadership role with responsibility for building the propulsion function and delivering the powertrain from early development through testing and towards production. Working in partnership with the Chief Engineer, Propulsion, you will own the team, delivery plan, budget, test capability and supplier performance. While the Chief Engineer retains technical authority, you will ensure propulsion development is properly planned, resourced and delivered against programme objectives. This is a hands on leadership position requiring sufficient technical depth to challenge engineering decisions, assess powertrain solutions and identify technical and delivery risks. Key Responsibilities Build and lead the propulsion engineering team, recruiting and developing Principal and Senior specialists across electric drives and propulsor engineering. Own the propulsion delivery plan, including scope, sequencing, estimates, resources and integration with the wider aircraft programme. Establish and develop powertrain test capability, including dynamometer and drive testing, propulsor testing, instrumentation and safe high voltage and high power test environments. Maintain hands on technical involvement, including the ability to assess drive sizing and challenge engineering solutions. Manage supplier performance across motors, inverters and propulsors, including long lead components and delivery recovery. Own propulsion budgets, programme estimates and investment requirements for test facilities. Manage critical interfaces with Flight Control, Battery and Energy Storage, Electrical, Structures and Industrialisation. Ensure safe execution across propulsion build and test environments. Identify, communicate and escalate technical and programme delivery risks. Support the progression of propulsion systems from prototype development and ground testing towards production.</p><p>We are looking for an experienced propulsion or powertrain engineering leader with the technical depth and leadership experience required to build and deliver a propulsion function within a complex aerospace or safety critical programme. Essential Requirements 12+ years' experience in propulsion, electric drives or powertrain engineering. At least 5 years' experience within airborne or equivalent safety critical applications. Proven experience delivering propulsion or powertrain development through to physical hardware and completed rig or ground testing. Experience owning programme plans, schedules and engineering delivery. Proven experience recruiting, building and leading senior technical engineering teams. Experience establishing or significantly expanding powertrain or electric drive test capability. Knowledge of test facilities, instrumentation, high voltage systems and test safety. Strong hands on knowledge of powertrain architecture with the technical depth to assess and challenge engineering decisions. Experience managing suppliers of complex or long lead technical components. Experience managing budgets, estimates and engineering investment. Strong multidisciplinary stakeholder and interface management skills. Ability to work effectively alongside a separate Chief Engineer or technical authority. Preferred Qualifications Bachelor's or Master's degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering or a related discipline. Experience with eVTOL, electric or hybrid electric aircraft propulsion. Experience delivering greenfield aerospace or advanced engineering programmes. Experience building engineering teams, facilities or test capabilities from the ground up. Experience supporting the transition from prototype development through to production.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Technician- RM 5 Mechanical Shift <p><strong>Essential Duties and Responsibilities</strong></p><br> <p>Optimize Production: To execute all scheduled (day-to-day, preventive) maintenance, corrective maintenance and major repairs of the equipment's in order to optimize production &amp; minimize plant down time for maintenance related development works Prompt Trouble Shooting: Responsible for trouble shooting during breakdowns of mechanical equipment's and provide the assistance to find out the root cause for corrective action maintenance related development works Providing Solutions: Responsible for attending mechanical maintenance problems during breakdowns in the RM Plant. To communicate to superiors of any abnormalities found in the mill in order to plan &amp; rectify the same. Audit and Investigation: Inspection of equipment's to meet engineering principles and safety regulations in maintenance related development works. Maintenance Support: To assist and help Superiors in Mechanical Maintenance (RM ) in all technical areas to ensure smooth maintenance of the RM for uninterrupted production and co-ordination with other departments. Implementing Standards: Follow mechanical maintenance standards for all equipment in the RM Plant. Policies and Procedures Management: To follow all relevant safety, quality, health and environmental management policies, procedures applicable to maintenance related development. Supervision:To lead a group of Technician / Fitter (instruction and guidance to Technician / Fitter) and participate in maintenance related development works.</p><br> <p><strong>Essential Duties and Responsibilities(Contd)</strong></p><br> <p><strong>Additional Duties and Responsibilities</strong></p><br> <p><strong>Knowledge, Skills and/or Abilities required</strong></p><br> <p>Strong problem solving skills Ability to handle multiple, diverse and changing responsibilities and following complex instructions Strong interpersonal skills Detail oriented, organized and self-motivated with ability to work independently Communication- Report writing and verbal English and ArabicTechnical knowledge of predictive &amp; preventive maintenance of RM Knowledge &amp; Skill of Trouble Shooting of RM . Understanding of engineering drawings and Hydraulic circuits Works with hand tools, measuring tools, portable tools and tackles Fluency in spoken and written English language. Knowledge of rigging and slinging Basic computer literacy</p><br> <p><strong>Minimum Education Qualification (Education Degree)</strong></p><br> <p>Diploma in Engineering</p><br> <p><strong>Any preferred professional training</strong></p><br> <p><strong>Professional Experience (Must haves)</strong></p><br> <p>5-6 Years as a Technician / Fitter in Steel Plant 7-8 years experience in Mechanical maintenance of Steel Plant as a Sr. Technician / Mechanic</p><br> <p><strong>Previous Experience/exposure Recommendations</strong></p><br> <p><strong>Key Performance Indicators</strong></p><br> <p>Ensure 'Health, Safety and Environment' with Zero accidents incurred by personnel 'Optimization and minimum' of cost for mechanical repairs, maintenance and downtime Ensure availability of RM through 'scheduling and preparing' plant equipment's 'Initiate corrective action' for prompt clarification, resolutions and results of problems 'Rectification of reviewed equipment' with smooth transition and production</p><br> <p><strong>Behavioural Competencies</strong></p><br> <p>Commitment to Health &amp; Safety</p><br> <p>Commitment to Result &amp; Quality (Employees)</p><br> <p>Effective Communication (Employees)</p><br> <p>Support &amp; Cooperation</p><br> <p>Teamwork &amp; Collaboration</p><br> <p><strong>Technical Competencies</strong></p><br> <p><strong>Working Condition Requirement</strong></p><br> <p>Concussion Low</p><br> <p>Dirt Mid</p><br> <p>Dust Level High</p><br> <p>Exposure to Chemicals Low</p><br> <p>Exposure to light Low</p><br> <p>Exposure to sun Low</p><br> <p>Gases &amp; Vapors Low</p><br> <p>Heat Level High</p><br> <p>Hindering Safety Gear Low</p><br> <p>Humidity Level High</p><br> <p>Lack of light Low</p><br> <p>Noise Level High</p><br> <p>Oil &amp; Grease Mid</p><br> <p>Risk of Accident Low</p><br> <p>Risk of Cold Low</p><br> <p>Working in heights Low</p><br> <br> <br> </div>

Join the Future of Green Innovation: Career Opportunities at Atlantic Industria<br>Location: JAFZA, Dubai, UAEIndustry: Renewable Energy / Clean Technology Manufacturing<br>About Atlantic Industria<br>Atlantic Industria represents a transformative industrial initiative to create a technology-driven renewable energy manufacturing base in JAFZA. Designed to support the UAE’s energy transition, enhance regional energy resilience, and position Dubai as a global center of green innovation, our initiative directly aligns with national strategies including the UAE Energy Strategy 2050, the Dubai Clean Energy Strategy 2050, and the Dubai Industrial Strategy 2030.<br>Our clear objective is to localize clean energy manufacturing, reduce import dependency, and become a net exporter of renewable energy solutions. JAFZA’s robust ecosystem and regulatory framework provide the ideal foundation for our mission, bringing together localized manufacturing, technology innovation, and job creation.<br>We are building our core project team to deliver a state-of-the-art 1.2 GW module factory. If you want to make a tangible impact on the region's sustainability goals, explore our open positions below.<br>Open Positions<br>1. Project Manager (x1) Onboarding: August 2026Reports To: CEO / Project Sponsor<br>Purpose:Lead end-to-end delivery of the 1.2 GW module factory—managing schedule, budget, contractors, and stakeholders from project launch through to mass production.<br>Key Responsibilities:Own the 24-month baseline schedule, budget, and risk register; report monthly to the Steering Committee. Manage interfaces between the EPC, design consultants, Employer's consultant, and the technology partner. Chair progress, design, and gate reviews; drive stage-gate exit criteria to closure. Approve manpower requisitions and lead the recruitment of the wider project organization. Manage JAFZA, DEWA, and local authority relationships at the project level.<br>Requirements:12–15+ years in industrial/EPC project delivery; PV (photovoltaic) or electronics manufacturing plant build experience is highly preferred. Proven track record of delivering capital projects valued at $\ge$ USD 50M; PMP or equivalent certification required. Strong contract management experience; GCC experience is strongly preferred. Fluent in English; Arabic language skills are a distinct advantage.<br>2. Senior Electrical Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the complete electrical scope, including the substation, DEWA interface, MV/LV distribution, and production equipment power and controls.<br>Key Responsibilities:Review electrical design from concept to detailed stages; approve load schedules and Single Line Diagrams (SLDs). Manage the DEWA application process, substation works, and the project energization sequence. Define electrical specifications in equipment RFPs and review vendor electrical documentation. Supervise site electrical installation, testing, and commissioning activities.<br>Requirements:10+ years of electrical engineering experience in industrial plants, with specific substation/utility interface experience. DEWA / UAE utility approval experience is strongly preferred. BSc in Electrical Engineering; Chartered Engineer (CEng) or Professional Engineer (PE) status preferred.<br>3. Senior Mechanical Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the mechanical and MEP scope, focusing on HVAC, compressed air, cooling, fire protection, and the specialized controlled environments required by the module production line.<br>Key Responsibilities:Review MEP design and validate utility sizing against technology partner requirements. Define mechanical/utility specifications in equipment RFPs and review vendor utility matrices. Supervise MEP installation, testing, commissioning, and project handover. Coordinate cleanroom and dry-area requirements closely with the technology partner.<br>Requirements:10+ years of mechanical/MEP engineering experience specifically within manufacturing facilities. Proven experience reviewing designs for HVAC and process utilities; exposure to PV or electronics plants is preferred. BSc in Mechanical Engineering.<br>4. Senior Civil Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the civil and structural scope from initial site preparation through piling, foundations, and structural construction up to final handover.<br>Key Responsibilities:Review civil/structural designs and approve piling and foundation packages. Supervise EPC civil works including leveling, fencing, piling, foundations, structures, and roads. Drive onsite construction quality (ITPs, concrete/steel inspections) in coordination with the QA/QC Expert. Manage civil interfaces with JAFZA infrastructure and coordinate authority inspections.<br>Requirements:10+ years of civil/structural engineering experience on industrial buildings, including direct piling experience. UAE municipality or free-zone (JAFZA/Trakhees) approval experience is preferred. BSc in Civil Engineering.<br>5. Project Accountant (x1) Onboarding: August 2026Reports To: Project Manager (Functional reporting to the CFO)<br>Purpose:Control project costs, including budgets, milestone payments, cash-flow forecasting, and maintaining statutory compliance.<br>Key Responsibilities:Operate robust cost control: manage commitments, actuals, and forecasts against CAPEX/OPEX budgets. Certify EPC and equipment milestone payments; manage bank drawdown requests. Oversee project payroll, WPS, VAT, and JAFZA financial compliance. Support debt term-sheet work with banks and investors by providing accurate project financials.<br>Requirements:7+ years of experience in project or plant accounting; experience with capital project cost control is essential. Strong working knowledge of UAE VAT and WPS regulations; proficiency in major ERP systems. Professional accounting qualification (CA, CMA, or ACCA) is preferred.<br>6. Senior HSEQ Supervisor (x1) Onboarding: September 2026Reports To: Project Manager<br>Purpose:Establish, implement, and enforce the project HSEQ regime from pre-site opening through to final plant commissioning.<br>Key Responsibilities:Author the project HSE plan and enforce EPC HSE contractual obligations. Manage site inductions, the permit-to-work (PTW) system, safety inspections, audits, and incident investigations. Drive compliance with JAFZA EHS, Civil Defense, and chemical-storage regulations (including managing the EIA-RA study interface). Set up foundational ISO 9001, 14001, and 45001 frameworks for the ongoing operating company.<br>Requirements:10+ years of HSE experience within construction or manufacturing environments; NEBOSH Diploma or equivalent qualification required. Direct experience working within the JAFZA/Trakhees EHS regulatory regime is strongly preferred. Lead Auditor certification (ISO 45001/14001) is an advantage.<br>7. Project Coordinator (x1) Onboarding: September 2026Reports To: Project Manager<br>Purpose:Run the daily operations of the Project Management Office (PMO), managing schedule maintenance, document control, action tracking, and interim recruitment administration until the dedicated HR team is onboarded.<br>Key Responsibilities:Maintain the master project schedule (Primavera P6/MS Project) and compile weekly look-aheads. Manage document control, transmittals, and official correspondence between the Owner, EPC, and consultants. Track project actions, meeting minutes, and KPI dashboards; prepare executive reporting packs. Administer recruitment logistics, visa files, and onboarding coordination during the initial team build.<br>Requirements:5+ years of experience in project coordination or a PMO function within construction or heavy industrial projects. Strong proficiency in Primavera P6 or MS Project, along with electronic document control systems (Aconex or similar). Excellent written and verbal English communication skills; prior UAE experience is preferred.<br>How to Apply If you meet the requirements and are ready to contribute to the UAE's green energy transition, please submit your updated CV. Important: To be considered for these roles, please include the following details within your application message or cover letter:Your availability for an interview Current and expected salary (in AED) Notice period Current location Current visa status (if applicable)

Join the Future of Green Innovation: Career Opportunities at Atlantic Industria<br>Location: JAFZA, Dubai, UAEIndustry: Renewable Energy / Clean Technology Manufacturing<br>About Atlantic Industria<br>Atlantic Industria represents a transformative industrial initiative to create a technology-driven renewable energy manufacturing base in JAFZA. Designed to support the UAE’s energy transition, enhance regional energy resilience, and position Dubai as a global center of green innovation, our initiative directly aligns with national strategies including the UAE Energy Strategy 2050, the Dubai Clean Energy Strategy 2050, and the Dubai Industrial Strategy 2030.<br>Our clear objective is to localize clean energy manufacturing, reduce import dependency, and become a net exporter of renewable energy solutions. JAFZA’s robust ecosystem and regulatory framework provide the ideal foundation for our mission, bringing together localized manufacturing, technology innovation, and job creation.<br>We are building our core project team to deliver a state-of-the-art 1.2 GW module factory. If you want to make a tangible impact on the region's sustainability goals, explore our open positions below.<br>Open Positions<br>1. Project Manager (x1) Onboarding: August 2026Reports To: CEO / Project Sponsor<br>Purpose:Lead end-to-end delivery of the 1.2 GW module factory—managing schedule, budget, contractors, and stakeholders from project launch through to mass production.<br>Key Responsibilities:Own the 24-month baseline schedule, budget, and risk register; report monthly to the Steering Committee. Manage interfaces between the EPC, design consultants, Employer's consultant, and the technology partner. Chair progress, design, and gate reviews; drive stage-gate exit criteria to closure. Approve manpower requisitions and lead the recruitment of the wider project organization. Manage JAFZA, DEWA, and local authority relationships at the project level.<br>Requirements:12–15+ years in industrial/EPC project delivery; PV (photovoltaic) or electronics manufacturing plant build experience is highly preferred. Proven track record of delivering capital projects valued at $\ge$ USD 50M; PMP or equivalent certification required. Strong contract management experience; GCC experience is strongly preferred. Fluent in English; Arabic language skills are a distinct advantage.<br>2. Senior Electrical Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the complete electrical scope, including the substation, DEWA interface, MV/LV distribution, and production equipment power and controls.<br>Key Responsibilities:Review electrical design from concept to detailed stages; approve load schedules and Single Line Diagrams (SLDs). Manage the DEWA application process, substation works, and the project energization sequence. Define electrical specifications in equipment RFPs and review vendor electrical documentation. Supervise site electrical installation, testing, and commissioning activities.<br>Requirements:10+ years of electrical engineering experience in industrial plants, with specific substation/utility interface experience. DEWA / UAE utility approval experience is strongly preferred. BSc in Electrical Engineering; Chartered Engineer (CEng) or Professional Engineer (PE) status preferred.<br>3. Senior Mechanical Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the mechanical and MEP scope, focusing on HVAC, compressed air, cooling, fire protection, and the specialized controlled environments required by the module production line.<br>Key Responsibilities:Review MEP design and validate utility sizing against technology partner requirements. Define mechanical/utility specifications in equipment RFPs and review vendor utility matrices. Supervise MEP installation, testing, commissioning, and project handover. Coordinate cleanroom and dry-area requirements closely with the technology partner.<br>Requirements:10+ years of mechanical/MEP engineering experience specifically within manufacturing facilities. Proven experience reviewing designs for HVAC and process utilities; exposure to PV or electronics plants is preferred. BSc in Mechanical Engineering.<br>4. Senior Civil Engineer (x1) Onboarding: August 2026Reports To: Project Manager<br>Purpose:Own the civil and structural scope from initial site preparation through piling, foundations, and structural construction up to final handover.<br>Key Responsibilities:Review civil/structural designs and approve piling and foundation packages. Supervise EPC civil works including leveling, fencing, piling, foundations, structures, and roads. Drive onsite construction quality (ITPs, concrete/steel inspections) in coordination with the QA/QC Expert. Manage civil interfaces with JAFZA infrastructure and coordinate authority inspections.<br>Requirements:10+ years of civil/structural engineering experience on industrial buildings, including direct piling experience. UAE municipality or free-zone (JAFZA/Trakhees) approval experience is preferred. BSc in Civil Engineering.<br>5. Project Accountant (x1) Onboarding: August 2026Reports To: Project Manager (Functional reporting to the CFO)<br>Purpose:Control project costs, including budgets, milestone payments, cash-flow forecasting, and maintaining statutory compliance.<br>Key Responsibilities:Operate robust cost control: manage commitments, actuals, and forecasts against CAPEX/OPEX budgets. Certify EPC and equipment milestone payments; manage bank drawdown requests. Oversee project payroll, WPS, VAT, and JAFZA financial compliance. Support debt term-sheet work with banks and investors by providing accurate project financials.<br>Requirements:7+ years of experience in project or plant accounting; experience with capital project cost control is essential. Strong working knowledge of UAE VAT and WPS regulations; proficiency in major ERP systems. Professional accounting qualification (CA, CMA, or ACCA) is preferred.<br>6. Senior HSEQ Supervisor (x1) Onboarding: September 2026Reports To: Project Manager<br>Purpose:Establish, implement, and enforce the project HSEQ regime from pre-site opening through to final plant commissioning.<br>Key Responsibilities:Author the project HSE plan and enforce EPC HSE contractual obligations. Manage site inductions, the permit-to-work (PTW) system, safety inspections, audits, and incident investigations. Drive compliance with JAFZA EHS, Civil Defense, and chemical-storage regulations (including managing the EIA-RA study interface). Set up foundational ISO 9001, 14001, and 45001 frameworks for the ongoing operating company.<br>Requirements:10+ years of HSE experience within construction or manufacturing environments; NEBOSH Diploma or equivalent qualification required. Direct experience working within the JAFZA/Trakhees EHS regulatory regime is strongly preferred. Lead Auditor certification (ISO 45001/14001) is an advantage.<br>7. Project Coordinator (x1) Onboarding: September 2026Reports To: Project Manager<br>Purpose:Run the daily operations of the Project Management Office (PMO), managing schedule maintenance, document control, action tracking, and interim recruitment administration until the dedicated HR team is onboarded.<br>Key Responsibilities:Maintain the master project schedule (Primavera P6/MS Project) and compile weekly look-aheads. Manage document control, transmittals, and official correspondence between the Owner, EPC, and consultants. Track project actions, meeting minutes, and KPI dashboards; prepare executive reporting packs. Administer recruitment logistics, visa files, and onboarding coordination during the initial team build.<br>Requirements:5+ years of experience in project coordination or a PMO function within construction or heavy industrial projects. Strong proficiency in Primavera P6 or MS Project, along with electronic document control systems (Aconex or similar). Excellent written and verbal English communication skills; prior UAE experience is preferred.<br>How to Apply If you meet the requirements and are ready to contribute to the UAE's green energy transition, please submit your updated CV. Important: To be considered for these roles, please include the following details within your application message or cover letter:Your availability for an interview Current and expected salary (in AED) Notice period Current location Current visa status (if applicable)

<ul><li><p>Perform factory acceptance testing (FAT) and routine testing of diesel generator sets.</p></li><li><p>Verify generator performance including voltage regulation, frequency stability, load acceptance, and protection functions.</p></li><li><p>Conduct load bank testing and performance analysis.</p></li><li><p>Test and configure engine controllers, generator controllers, and synchronization systems.</p></li><li><p>Inspect electrical wiring, control panels, and mechanical installations before testing.</p></li><li><p>Diagnose and resolve electrical, mechanical, and control system faults identified during testing.</p></li><li><p>Prepare testing reports, checklists, and quality documentation.</p></li><li><p>Coordinate with production, assembly, and quality departments to ensure timely completion of projects.</p></li><li><p>Ensure compliance with relevant standards such as ISO, IEC, and customer specifications.</p></li><li><p>Support site commissioning activities when required.</p></li><li><p>Follow all company safety procedures and HSE requirements during testing operations.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>GenSet</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Perform routine and emergency maintenance on high-voltage protection and control systems, ensuring operational reliability and safety.</li><li>Diagnose and troubleshoot complex faults within protection relays, control circuits, and associated equipment to minimize downtime.</li><li>Conduct rigorous testing and calibration of protection schemes and equipment according to established standards and procedures.</li><li>Interpret and apply technical drawings, schematics, and maintenance manuals to guide repair and modification activities.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Electrical Engineering or a related field from an accredited institution.</li><li>Minimum of 5 years of hands-on experience in the maintenance of protection and control systems within the power utility or industrial sector.</li><li>Professional Engineer (PE) license or equivalent professional certification is highly desirable.</li><li>Proficiency in testing and commissioning of digital and electromechanical protection relays (e.g., SEL, GE, ABB, Siemens).</li></ul><p></p></section>

Role Description <br>The Motor Winder will be responsible for rewinding, repairing, and overhauling electric motors and related components in an on-site facility located in Dubai, United Arab Emirates. Day-to-day tasks include inspecting motors, diagnosing faults, stripping and cleaning stators and rotors, winding coils according to specifications, and performing varnishing, baking, and testing to ensure safe and reliable operation. The role involves working with various motor types and voltage ranges, using hand tools, measuring instruments, and specialised equipment while following safety and quality standards. Collaboration with technicians and engineers to document work performed, maintain accurate records, and support continuous improvement in repair processes is expected. This is a full-time position requiring consistent presence at the facility and adherence to company procedures and deadlines.<br>Qualifications<br>Strong technical skills in motor rewinding, coil winding, and insulation procedures for AC and DC motors. Experience with fault diagnosis, testing, and troubleshooting using electrical measuring instruments and tools. Practical knowledge of mechanical fitting, alignment, and general electromechanical repair practices. Ability to read and interpret technical drawings, wiring diagrams, and manufacturer specifications. Commitment to workplace safety, proper tool handling, and adherence to quality control standards. Previous experience in motor and generator repair, preferably within an industrial or workshop environment. Vocational or technical qualification in electrical or electromechanical engineering, or equivalent hands-on training. Effective communication skills, reliability, and ability to work both independently and as part of a diverse team.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking a <i>Senior Telecommunications Engineer</i>, reporting directly to <i>the Head of the Department</i> to join our team based in <i>UAE, Abu Dhabi</i>.</p><br><p><strong>About us:</strong></p><br><p>Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.</p><br><p>Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.</p><br><p><strong>About the mission we offer you:</strong></p><br> <ol> <li>a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }</li> <li> Job Purpose <p>The Telecom Engineer is responsible for the design, engineering, specification, and implementation of telecommunication systems for onshore and offshore Oil &amp; Gas projects. The role involves supporting FEED, Detailed Engineering, EPC, procurement, construction, and commissioning activities while ensuring compliance with client requirements, industry standards, project schedules, and quality requirements.</p><br>Key Responsibilities Engineering &amp; Design <ul> <li>Develop telecommunication engineering deliverables for FEED and Detailed Design projects.</li> <li>Prepare Telecom Design Basis, system architecture diagrams, block diagrams, and technical specifications.</li> <li>Design and specify telecommunication systems including: <ul> <li>Public Address &amp; General Alarm (PAGA)</li> <li>Telephone and IP Telephony Systems</li> <li>CCTV Systems</li> <li>Access Control Systems</li> <li>Radio Communication Systems (VHF/UHF/TETRA)</li> <li>Fiber Optic Communication Networks</li> <li>Structured Cabling Systems</li> <li>LAN/WAN Networks</li> </ul></li> <li>Prepare material requisitions, datasheets, cable schedules, and equipment lists.</li> <li>Perform telecom system studies and ensure system compliance with project requirements.</li> <li>Review drawings and documents from vendors and other engineering disciplines.</li> </ul>Procurement Support <ul> <li>Prepare technical requisitions and purchase specifications.</li> <li>Review vendor quotations and participate in Technical Bid Evaluations (TBE).</li> <li>Review and comment on vendor documents and drawings.</li> <li>Coordinate with procurement teams to ensure timely equipment delivery.</li> </ul>Project Execution <ul> <li>Support project activities to ensure deliverables are completed within schedule and budget.</li> <li>Coordinate with Instrumentation, Electrical, Mechanical, Civil, and Process disciplines.</li> <li>Participate in client meetings and technical discussions.</li> <li>Maintain project documentation and engineering progress records.</li> </ul>Construction &amp; Commissioning Support <ul> <li>Provide technical support during construction, installation, testing, and commissioning activities.</li> <li>Address technical queries raised by site teams and contractors.</li> <li>Participate in FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) activities.</li> <li>Support troubleshooting and resolution of telecom system issues.</li> </ul>Quality &amp; HSE <ul> <li>Ensure compliance with company procedures, client specifications, and international standards.</li> <li>Adhere to Quality Management System (QMS) requirements.</li> <li>Support HSE objectives and ensure telecom designs comply with project safety requirements.</li> </ul>Qualifications Education <ul> <li>Bachelor's Degree in Telecommunications Engineering, Electronics Engineering, Electrical Engineering, or a related discipline.</li> </ul>Experience <ul> <li>Minimum 5-8 years of telecom engineering experience in Oil &amp; Gas, Petrochemical, LNG, Refinery, or Energy projects.</li> <li>Experience in FEED, Detailed Design, and EPC projects preferred.</li> <li>Middle East and ADNOC project experience is an advantage.</li> </ul>Technical Skills <ul> <li>Telecom System Design</li> <li>Fiber Optic Communication Systems</li> <li>CCTV and Security Systems</li> <li>PAGA Systems</li> <li>Access Control Systems</li> <li>Radio Communication Systems</li> <li>Structured Cabling Systems</li> <li>LAN/WAN Networks</li> <li>Technical Specifications and Datasheets</li> <li>Vendor Document Review</li> <li>Technical Bid Evaluation (TBE)</li> <li>FAT/SAT Coordination</li> </ul> <br></li> </ol><br><p><i>Starting Date: ASAP</i></p><br><p><strong>About you:</strong></p><br><p>We love to hear from you and how you match with this position. To be successful in this mission you should consider the following requirements:</p><br><p>Qualifications: Bachelors or Diploma</p><br><p>Languages: <i>English + proficiency level (Basic, Professional, Fluent)</i></p><br><p>Main skills: <i>(up to 4)</i></p><br><p><strong>Your career with us&nbsp;</strong></p><br><p>Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T. EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.</p><br><p>&nbsp;<strong>What’s Next?</strong></p><br><p>Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with a reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.&nbsp;</p><br><p>We invite you to get to know more about our company by visiting&nbsp;www.ten.com&nbsp;and follow us on&nbsp;LinkedIn,&nbsp;Instagram,&nbsp;Facebook,&nbsp;X&nbsp;and&nbsp;YouTube&nbsp;for company updates.</p><br><br> </div>

<ul><li>Diagnose and repair complex electrical systems in vehicles, including engine control units, infotainment, and advanced driver-assistance systems.</li><li>Install, maintain, and troubleshoot high-voltage systems in electric and hybrid vehicles, ensuring safety and operational integrity.</li><li>Interpret and utilize advanced diagnostic tools and oscilloscopes to pinpoint electrical faults and performance issues.</li><li>Design, develop, and test electrical components and wiring harnesses for new vehicle models or upgrades.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possession of an Associate's or Bachelor's degree in Electrical Engineering, Automotive Technology, or a related field.</li><li>Relevant certifications such as ASE (Automotive Service Excellence) in Electrical/Electronic Systems or EV/Hybrid Specialist.</li><li>A minimum of 5 years of hands-on experience specifically within the automotive electrical or automotive engineering sector.</li><li>Proven expertise in diagnosing and repairing complex electrical issues on a variety of vehicle makes and models.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Perform routine and emergency maintenance on high-voltage protection and control systems, ensuring operational reliability and safety.</li><li>Diagnose and troubleshoot complex faults within protection relays, control circuits, and associated equipment to minimize downtime.</li><li>Conduct rigorous testing and calibration of protection schemes and equipment according to established standards and procedures.</li><li>Interpret and apply technical drawings, schematics, and maintenance manuals to guide repair and modification activities.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Electrical Engineering or a related field from an accredited institution.</li><li>Minimum of 5 years of hands-on experience in the maintenance of protection and control systems within the power utility or industrial sector.</li><li>Professional Engineer (PE) license or equivalent professional certification is highly desirable.</li><li>Proficiency in testing and commissioning of digital and electromechanical protection relays (e.g., SEL, GE, ABB, Siemens).</li></ul><p></p></section>

Position: QC Engineer (Electrical) Location: UAEExperience: 3-4 Years Requirements:Bachelor's Degree in Electrical Engineering.3-4 years of experience in Transmission/High Voltage projects. Hands-on experience with DEWA, TAQA, or similar utility projects is highly preferred. Strong knowledge of electrical quality control procedures, inspections, testing, and commissioning activities. Familiarity with project quality documentation, ITPs, method statements, and inspection reports. Ability to coordinate with project teams, consultants, and clients to ensure compliance with quality standards. UAE experience is preferred. Key Responsibilities:Perform quality inspections and monitor electrical installation activities on site. Ensure compliance with project specifications, standards, and client requirements. Review quality documentation and prepare inspection reports. Coordinate site inspections with consultants and clients. Support testing, commissioning, and handover activities.

<ul><li>Conduct on-site assessments to determine optimal solar panel placement and system design based on energy needs and site conditions.</li><li>Install solar panels, racking systems, inverters, and other electrical components, ensuring adherence to safety protocols and building codes.</li><li>Perform electrical wiring and connections, including AC and DC circuits, ensuring proper grounding and voltage levels.</li><li>Troubleshoot and diagnose system malfunctions, using diagnostic tools to identify and resolve electrical and mechanical issues.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training or associate's degree in a relevant field is preferred.</li><li>NABCEP (North American Board of Certified Energy Practitioners) certification or equivalent is highly desirable.</li><li>Minimum of 2 years of hands-on experience in solar panel installation, maintenance, and repair.</li><li>Prior experience in the residential or commercial solar industry.</li></ul>

<p>Roles & Responsibilities • Prepare and review detailed electrical shop drawings in line with project specifications and standards. • Coordinate with project engineers, consultants, and authorities to obtain approvals for drawings and scope-related submissions. • Manage and track all authority submissions, ensuring timely approvals and compliance. • Liaise with relevant authorities for project approvals, inspections, and documentation. • Ensure all electrical designs and submissions comply with local regulations and authority requirements.</p><p>• Minimum 5 years of experience in electrical shop drawings and authority coordination. • Proven experience working with UAE authorities, including: • RTA (street lighting, traffic signals, ITS) • DEWA-ED (high-voltage works) • DEWA-WD (SCADA systems) • Chilled Water systems, particularly SCADA-related work • Bachelor's degree in Electrical Engineering or a related field. • Strong understanding of submission and approval processes in the UAE. • Good communication and coordination skills. • Ability to manage multiple submissions and deadlines efficiently.</p>