Maintenance Engineer Jobs - Abu Dhabi UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p>The successful candidate will assist the Engineer in carrying out Cabin Appearance maintenance tasks, including inspections, repairs, testing, and component replacement on Air Arabia and third-party aircraft. The role ensures that all assigned work is performed and recorded accurately and in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements.</p><br><br><b>Key Result Responsibilities</b> <br><p><strong>Operational Excellence</strong></p><br><br><ul><li>Reviews assigned task cards with the Cabin Appearance Engineer to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.</li><li>Assists the Engineer to constantly verify and ensure compatibility and readiness of cabin appearance components as per approved standards and quantity to be used as and when needed.</li><li>Prepares and performs scheduled component maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</li><li>Carries out related test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</li><li>Carries out cabin appearance assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.</li><li>Ensures proper tooling / equipment is ready to perform tasks, returning all of it in good condition following completion of work.</li><li>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with component condition or with the execution of the work.</li><li>Demonstrates high level of consideration to housekeeping standards in all tasks performed.</li></ul><br><p><strong>Safety</strong></p><br><br><ul><li>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</li><li>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</li><li>Pay attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.</li></ul><br><p>&nbsp;<strong>Reputation and Teamwork</strong></p><br><br><ul><li>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks.</li><li>Representing Air Arabia: presents a positive and competent image of technical professionalism to other companies’ personnel and customers.</li></ul><br><p>&nbsp;<strong>Cost Awareness</strong></p><br><br><ul><li>Maintains positive awareness of the cost of aircraft maintenance including use of time and materials.</li><li>Minimizes unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Qualified and experienced Workshop Maintenance Technician.</li><li>Ability to read, write, speak and understand English to a good standard for technical communications.</li><li>Ability to use computer (Microsoft Office).</li><li>Ability to obtain UAE Driver’s License.</li></ul><br><b>Work Experience</b> <br><ul><li>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</li><li>At least 2 years’ experience in a Line Maintenance environment.</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span>The successful candidate will assist the Engineer in carrying out airframe and engine maintenance tasks on Air Arabia and third-party aircraft. The role includes supporting inspections, repairs, defect rectification, and component replacement to ensure aircraft serviceability and operational readiness.</span></p><br><br><br><p><span>The position is responsible for performing assigned maintenance activities and recording completed work accurately and in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements, maintaining the required standards of safety and airworthiness.</span></p><br><br><b>Key Result Responsibilities</b> <br><span><strong>Operational Excellence</strong></span><br><ul><li><span>Reviews assigned task cards with the Engineer-in-Charge to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.&nbsp;</span></li><li><span>Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</span></li><li><span>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</span></li><li><span>Carries out repairs, component replacements and tests as instructed by assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.</span></li><li><span>Ensures proper tooling / equipment is drawn from stores to perform tasks, returning all of it in good condition following completion of work.</span></li><li><span>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with aircraft condition or with the execution of the work.</span></li><li><span>Demonstrates high level of consideration to housekeeping standards in all tasks performed.</span></li></ul><br><span><strong>Safety</strong></span><br><ul><li><span>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</span></li><li><span>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</span></li><li><span>Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.</span></li></ul><br><span><strong>Reputation and Teamwork</strong></span><br><ul><li><span>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks</span></li><li><span>Representing Air Arabia:&nbsp; presents a positive and competent image of technical professionalism to other companies’ personnel and customers.</span></li></ul><br><span><strong>Cost Awareness</strong></span><br><ul><li><span>Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</span></li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span><span><span><span>Qualified and experienced Civil Aircraft Maintenance Technician.</span></span></span></span></li><li><span><span><span><span>Ability to read, write, speak and understand English to a good standard for technical communications.</span></span></span></span></li><li><span><span><span><span>Ability to use computer (Microsoft Office).</span></span></span></span></li><li><span><span>Ability to obtain UAE Driver’s License.</span></span></li></ul><br><b>Work Experience</b> <br><ul><li><span><span><span><span>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</span></span></span></span></li><li><span><span><span><span>At least 2 years’ experience in Line Maintenance environment.</span></span></span></span></li><li><span><span><span><span>Able to demonstrate solid basic understanding of Airframe and Engine Maintenance theory and practice.</span></span></span></span></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span>The successful candidate will assist the Engineer in carrying out airframe and engine maintenance tasks on Air Arabia and third-party aircraft. The role includes supporting inspections, repairs, defect rectification, and component replacement to ensure aircraft serviceability and operational readiness.</span></p><br><br><br><p><span>The position is responsible for performing assigned maintenance activities and recording completed work accurately and in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements, maintaining the required standards of safety and airworthiness.</span></p><br><br><b>Key Result Responsibilities</b> <br><span><strong>Operational Excellence</strong></span><br><ul><li><span>Reviews assigned task cards with the Engineer-in-Charge to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.&nbsp;</span></li><li><span>Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</span></li><li><span>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</span></li><li><span>Carries out repairs, component replacements and tests as instructed by assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.</span></li><li><span>Ensures proper tooling / equipment is drawn from stores to perform tasks, returning all of it in good condition following completion of work.</span></li><li><span>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with aircraft condition or with the execution of the work.</span></li><li><span>Demonstrates high level of consideration to housekeeping standards in all tasks performed.<br></span></li></ul><br><span><strong>Safety</strong></span><br><ul><li><span>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</span></li><li><span>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</span></li><li><span>Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.</span></li></ul><br><span><strong>Reputation and Teamwork</strong></span><br><ul><li><span>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks.</span></li><li><span>Representing Air Arabia: presents a positive and competent image of technical professionalism to other companies’ personnel and customers.</span></li></ul><br><span><strong>Cost Awareness</strong></span><br><ul><li><span>Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</span></li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span><span><span><span>Qualified and experienced Civil Aircraft Maintenance Technician.</span></span></span></span></li><li><span><span><span><span>Ability to read, write, speak and understand English to a good standard for technical communications.</span></span></span></span></li><li><span><span><span><span>Able to demonstrate solid basic understanding of Avionics maintenance theory and practice.</span></span></span></span></li><li><span><span>Ability to obtain UAE Driver’s License.</span></span></li></ul><br><b>Work Experience</b> <br><ul><li><span><span><span><span>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</span></span></span></span></li><li><span><span><span><span>At least 2 years’ experience in a Line Maintenance environment.</span></span></span></span></li><li><span><span><span><span>Good Avionics Maintenance Knowledge and experience.</span></span></span></span></li><li><span><span><span><span>Able to demonstrate solid basic understanding of Avionics Systems Maintenance theory and practice</span></span></span></span></li><li><span><span><span><span>Competent using specialised Avionics test equipment, computers and software tools.</span></span></span></span></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Special Note – Jakarta Recruitment Event</b> <br><p>This vacancy is linked to Air Arabia’s upcoming <strong>invitation-only Engineering Recruitment Event in Jakarta, Indonesia</strong>.&nbsp; Candidates should apply to this vacancy only if they are available to attend the recruitment event in Jakarta during the <strong>first week of September 2026</strong>, subject to being shortlisted and invited by Air Arabia.&nbsp; Full event details, including venue, date, timing and interview schedule, will be shared only with shortlisted candidates prior to the event.</p><br><br><p>If you are interested in similar Air Arabia opportunities but are not available to attend the Jakarta event, please apply separately to the relevant non-event vacancy on the Air Arabia careers site.</p><br><br><b>Job Purpose</b> <br><p>The successful candidate leads the assigned team of B1 Engineers ensuring the safe and efficient maintenance and repair of aircraft. In addition, performs duties of B1 Certifying Engineer and Category C to ensure that maintenance tasks on the airline and third-party aircrafts, including inspections, repairs, and component replacement is in accordance with the Airline and regulatory requirements.</p><br><br><b>Key Result Responsibilities</b> <br><p><strong>Category C authorization &amp; Team Leading</strong></p><br><br><ul><li>Verify that maintenance tasks have been carried out to the required standard by the respective Certifying Engineers&nbsp;</li><li>Distributes and allocates maintenance tasks to B1 Engineers &amp; Lead Technicians to ensure completion within assigned timelines and in compliance with airline and regulatory requirements.&nbsp;</li><li>Monitor progress &amp; manage performance of assigned B1 Engineer on shift against the assigned planned tasks to ensure timely completion.&nbsp;</li><li>Provides proper guidance to the Base Maintenance Engineers and Lead Technicians to assist them carry out their assigned maintenance tasks such as trouble shooting needed to identify and find solutions for potential and existing defects.</li><li>Provide regular feedback to Shift Manager on the performance and development of B1 Engineers &amp; Technicians.</li><li>Escalate any concerns and issues related to assigned B1 maintenance tasks and suggest corrective measures to the Shift Managers</li><li>Initiate and implement cost saving projects within B1 scope.</li><li>Develop the skills of B1 Technicians &amp; Engineers to their full potential and orient the new joiners into the team.</li><li>Manages human factors aspects of maintenance for the assigned shift, ensuring that the continuity of critical maintenance tasks is protected, by avoidance of task interruption and the proper use of handover procedures.</li><li>Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimizes unnecessary waste of consumable material and part repair cost by avoiding work duplication during maintenance.</li></ul><br><p><strong>B1 Certifying Engineer&nbsp;</strong></p><br><br><ul><li>Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</li><li>Reviews assigned task cards with the Shift Manager to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.&nbsp;</li><li>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</li><li>Performs defect troubleshooting and rectification in accordance with Aircraft Maintenance Manuals and instructions provided by Engineering Department.</li><li>Signs of maintenance tasks performed or supervised within the scope of own authorization, verifying that the task card and associated documents have been completed to the required standard following completion of all maintenance.</li><li>Manages communications with other Engineers and Technicians related to the assigned tasks, ensuring proper coordination, continuity and handover of work.</li><li>Takes positive steps to protect self and other persons in the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</li><li>Ensures all safety measures and working procedures as well as specified rules and regulations are being considered and adhered to when carrying out or assigning any maintenance work on aircrafts.&nbsp;</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Holds /has held an EASA Part 66 or GCAA CAR 66 B1 Aircraft Maintenance License (unrestricted) and company maintenance approvals on the Airbus A320/A321. With 2+ years of experience.</li><li>Proficiency in Microsoft Office.</li><li>Ability to lead and guide a team of Aircraft Engineers &amp; Technicians</li><li>Category C Authorization</li><li>Technical report writing</li><li>Fluent in English (verbal and written)</li></ul><br><b>Work Experience</b> <br><ul><li>(Internal Candidates only) 2+ years’ experience as B1 Engineer in ABY Base / Hangar Maintenance including 1 year in a team leading capacity, with Cat C authorization experience</li><li>Experience &amp; in-depth knowledge of B1 Maintenance practices and GCAA standards</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>MAIN OBJECTIVE OF ROLE</strong><br>To train in the role of Aircraft Mechanic, gaining the experience and qualifications necessary to work independently, by carrying out scheduled and unscheduled maintenance on the flydubai fleet. <br><strong>KEY RESPONSIBILITIES</strong><br><ul><li>Ensures that practical task training is completed as directed by flydubai certifying staff, in accordance with regulatory and company requirements.</li><li>Ensures that continuous improvement is achieved in ability to complete maintenance tasks and task administration/paperwork.</li><li>To maintain and update periodically the log of their engineer's practical training and task completion, to support application to hold the required levels of company authorization.</li><li>To maintain currency of mandatory training requirements necessary to safely engage in maintenance activities.</li><li>Ensures that all work is carried out in accordance with company procedures and Health and Safety legislation.</li><li>Assists in supporting the operation by working rostered and requested overtime, up to a maximum of 50 hrs. pcm.</li><li>Assists the Senior Certifying Engineer in support of other operational roles when needed, such as Driver Line Maintenance, where primary personnel may be unavailable.</li><li>To engage in and pass competency assessments for the role, as required by company legislation.</li><li>To acquire and maintain a company-standard mechanic's toolbox and associated hand tools, complying with mandatory toolbox audits as laid out in company regulations.</li><li>Assists the Certifying Engineer in the accomplishment of routine, scheduled and unscheduled maintenance, in accordance with the aircraft maintenance manual.</li></ul> <br><strong>QUALIFICATIONS</strong><br><ul><li>High School Diploma</li><li>Basic training course (apprenticeship) in aircraft maintenance, or a recognized course of instruction in aircraft maintenance</li><li>Fluent in English</li><li>Years with qualifications: 2 - 4 years</li></ul> <br><strong>COMPETENCIES</strong><br><ul><li>Customer Focus</li><li>Teamwork</li><li>Effective Communication</li><li>Personal Accountability &amp; Commitment to achieve</li><li>Resilience &amp; Flexibility (Can do attitude)</li></ul> <br><strong>ISR REQUIREMENTS</strong><br>Reads and complies with the ISR policies of the Company and diligently reports any weakness or incidents to the respective Line Manager or the Information Security team. Completes all required ISR awareness sessions and follows associated guidelines in the day-to-day business operations.<br> </div>

Job Purpose:The Maintenance Engineer is responsible for managing an inhouse team of technicians and external vendors to make sure the Americana Restaurants, Commissaries and Head/Regional offices are well maintained to the global standards in terms of MEP, General Maintenance, Branding, Compliance, Health & Safety etc. The Engineer will be the direct point of contact for Regional Operation team and will make sure excellent customer services and SLA are achieved. The Engineer will be responsible for taking the NSO from the Construction team as per the HO standards and maintained these restaurants to the same standards.<br>Key Responsibilities:1) Reactive Complaint / PPMMust be able to manage response time for technician and external vendors as per Americana Maintenance SLA/KPIPPM WO to be completed and monitored as per the SLA and compliance2) Customer and Stakeholder Management As a Maintenance supervisor must have excellent customer relationship and stakeholder management Direct POC for Operation team as per the AOR and must be available and respond during Restaurants Operation time Stakeholders like Supply chain, Finance, Landlord Management3) Capex and OPEX Management Execute the yearly Capex plan for the year end to end(Technical Reports, RFP, and Execution and Reporting) for his AORManage the monthly and yearly OPEX Budget and not overspend Minimize the jobs from External Vendors by rectifying them through his in-house team and ensure the spares are not replaced unless necessary Advises supervisor regarding major repairs / changes required.4) Energy and Sustainability Management Help Americana Maintenance team with achieving the targets initiatives for the year with IoT projects, Digital thermostats, water and gas consumption, solar panel installation etc.5) Team Management Must be able to manage a team of tech. and external vendors. Arranging training for his team through both inhouse and outside trainers Shift planning and priority planning etc.6) Personal Growth Improve skills & efficiency by attending courses. Making sure to use latest digital tech. in his daily work and work smart to manage the volume of WO both PPM and RM.<br>Education: BSc in Electrical/Mechanical Engineering is a must.<br>Experience: 5-7 years in an overall Restaurants Maintenance background.<br>Job-Specific Skills: Strong hands-on and supervisory experience on Kitchen Equipment and MEP, plus have a very good knowledge of UAE market in terms of authority regulations, malls/landlord requirements.<br>Language Skills: Must be able to Communicate in English, Arabic speaking would be big plus, having excellent written and oral capabilities.<br>IT Skills: Good knowledge of using Field Management System, MS office skills, CAFM Software’s, Iot based apps

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Special Note – Jakarta Recruitment Event</b> <br><p>This vacancy is linked to Air Arabia’s upcoming&nbsp;<strong>invitation-only Engineering Recruitment Event in Jakarta, Indonesia</strong>.&nbsp; Candidates should apply to this vacancy only if they are available to attend the recruitment event in Jakarta during the <strong>first week of September 2026</strong>, subject to being shortlisted and invited by Air Arabia.&nbsp; Full event details, including venue, date, timing and interview schedule, will be shared only with shortlisted candidates prior to the event.</p><br><br><br><p>If you are interested in similar Air Arabia opportunities but are not available to attend the Jakarta event, please apply separately to the relevant non-event vacancy on the Air Arabia careers site.</p><br><br><b>Job Purpose</b> <br><p>The successful candidate will assist the Engineer in carrying out Cabin maintenance tasks, including inspections, repairs, testing, and component replacement on Air Arabia and third-party aircraft. The role ensures that all assigned work is performed and recorded accurately and in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements.</p><br><br><b>Key Result Responsibilities</b> <br><p><strong><span>Operational Excellence</span></strong></p><br><br><ul><li>Reviews assigned task cards with the Cabin Appearance Engineer to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.</li><li>Assists the Engineer to constantly verify and ensure compatibility and readiness of cabin appearance components as per approved standards and quantity to be used as and when needed.</li><li>Prepares and performs scheduled component maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</li><li>Carries out related test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</li><li>Carries out cabin appearance assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.</li><li>Ensures proper tooling / equipment is ready to perform tasks, returning all of it in good condition following completion of work.</li><li>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with component condition or with the execution of the work.</li><li>Demonstrates high level of consideration to&nbsp;<span>housekeeping</span>&nbsp;standards in all tasks performed.</li></ul><br><p><strong>Safety</strong></p><br><br><ul><li>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</li><li>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</li><li>Pay attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.</li></ul><br><p>&nbsp;<strong>Reputation and Teamwork</strong></p><br><br><ul><li>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks.</li><li>Representing Air Arabia: presents a positive and competent image of technical professionalism to other companies’ personnel and customers.</li></ul><br><p>&nbsp;<strong><span>Cost Awareness</span></strong></p><br><br><ul><li>Maintains positive awareness of the cost of&nbsp;<span>aircraft maintenance</span>&nbsp;including use of time and materials.</li><li>Minimizes unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Qualified and experienced Workshop Maintenance Technician.</li><li>Ability to read, write, speak and understand&nbsp;<span>English</span>&nbsp;to a good standard for technical communications.</li><li>Ability to use computer (Microsoft Office).</li><li>Ability to obtain UAE Driver’s License.</li></ul><br><b>Work Experience</b> <br><ul><li>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</li><li>At least 2 years’ experience in a Line Maintenance environment.</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><strong>About the Company:</strong>&nbsp;</p><br><p><strong>ADNOC is one of the world's leading energy producers, and a primary catalyst for the growth and diversification of the United Arab Emirates.&nbsp;</strong>Our diverse family of more than 50,000 employees is made up of over 100 different nationalities. People from different backgrounds, with unique perspectives and wide-ranging skillsets, who share a collective responsibility: to enable and accelerate progress, both here in the UAE and across the globe. Here at ADNOC, we go beyond business as usual. We do things differently, challenge convention, and embrace new ways of thinking. This is what defines and differentiates us. By working together every day, we’re bringing energy to life.</p><br><p>JOB PURPOSE:</p><br><p>Carry out day to day Telecom maintenance activates in addition to corrective and breakdown maintenance activates related to all Telecom equipment in the assigned field / area,&nbsp;</p><br><p>KEY ACCOUNTABILITIES</p><br><ul><li><ul><li>Carry out routine and preventive maintenance work, repair and testing Of Telecom equipment in line With Standard Operating Procedures (SOP's) and established safe working practices. Responds to work requests/work orders in a timely manner as per work assignments from Telecom Engineer.&nbsp;&nbsp;Obtain the necessary work permits and certificates as per maintenance procedures and company HSE regulations to safely carry out routine and non-routine tasks.</li><li>Make routine inspections on Telecom installations at various sites within the field/area of responsibility to determine equipment serviceability and ensure that all test equipment and measurement devices are well calibrated and have a valid certification,</li></ul></li></ul><p>&nbsp;Monitor Telecom network performance over the Network Management Systems (NMS) software to determine failure conditions and bring it to the attention of Telecom engineer for quick troubleshooting and resolution.</p><br><ol><li><ul><li>Carry out modification and new equipment installations as per approved plans in line with Telecom engineer's directions and supervises external contractor work as assigned.</li></ul></li></ol><ol><li><ul><li>Participate in the trouble shooting and repair of Telecom equipment that involves other disciplines such as instrumentation in close cooperation With Other disciple technicians and external agencies.&nbsp;&nbsp;Interact and Interface with Other disciple maintenance personnel as well as external agencies like</li></ul></li></ol><p>Etisalat. maintenance contractors Etc, to carry out troubleshooting and maintenance activities,&nbsp;Update maintenance records, databases and redlines as built drawings on modifications for all</p><br><p>Telecom equipment in use and update work records in Maintenance Management System,</p><br><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Carry out the repair and testing of Telecom equipment modules in a workshop environment</p><br><p>QUALIFICATIONS EXPERIENCE KNOWLEDGE &amp; SKILLS:<br>Minimum Qualification</p><br><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Technical Diploma in relevant field or Secondary School Certificate with a vocational trade certificate&nbsp;in the relevant field</p><br><p>Minimum Experience &amp; Knowledge &amp; Skills</p><br><p>&nbsp;4 years of experience, preferably in Oil &amp; Gas industry.</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Purpose<p>In <strong>Base Maintenance</strong>, our expert engineers deliver unparalleled service for all aircraft checks, from comprehensive inspections to major system repairs. We handle cabin retrofits, aircraft deliveries, and detailed inspection programs for Airbus A380, A350 and Boeing 777.</p><br><br><p>Our team excels in timely, cost-effective solutions for A &amp; C checks, engine change, and landing gear changes, along with unscheduled maintenance and pre-service checks.</p><br><br><p>Responsible for performing maintenance tasks on Emirates and third-party aircraft and components in compliance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of a Licensed Aircraft Engineer within the relevant trade or cross-trade disciplines for which they are trained.</p><br><br><p><strong>In this role, you will:</strong></p><br><br><ul><li>Carry out routine servicing and maintenance of aircraft, engines, and components and/or approved structural repairs in compliance with manufacturer procedures.</li><li>Ensure adherence to all safety procedures during fluid replenishment, aircraft refuelling, and aircraft systems charging or servicing as required.</li><li>Complete component replacements and other maintenance activities as directed by the immediate supervisor. This includes obtaining and interpreting the Aircraft Maintenance Manual (AMM), Illustrated Parts Catalogue (IPC), Component Maintenance Manual (CMM), Structural Repair Manual (SRM), or other OEM-approved documentation required to perform the task.</li><li>Support Licensed Aircraft Engineers and Approved/Licensed Technicians in troubleshooting, repairs, and modifications in accordance with job cards. Complete tasks promptly to minimise delays, prepare work based on aircraft status, report defects quickly, and ensure accurate shift handovers.</li><li>Promote and maintain a strong safety culture by minimising risks, reporting deficiencies, and ensuring clean, organised work areas free of FOD. Regularly audit and maintain toolboxes, vehicles, and equipment while complying with all airport safety regulations, including holding a valid Airport Driving Permit and adhering to manoeuvring area requirements.</li><li>Contribute to team objectives and support continuous improvement initiatives through collaboration with colleagues.</li><li>When required, apply current knowledge and experience in aircraft maintenance support, aircraft repairs, and modifications to assist with resource allocation (using RMS/RTC applications as needed) and departmental projects.</li></ul>Qualification<p><strong>To be considered for this role, you will need: </strong></p><br><br><ul><li>5+ years in Engineering</li><li>Vocational or Diploma (12+2 or equivalent)</li><li>Graduate (12+2) in Engineering or a relevant discipline.</li><li>Apprenticeship in Aircraft Maintenance or equivalent training with a reputable airline or an approved aircraft maintenance organisation, or an Engineering Aircraft Maintenance License.</li><li>Experience in an aircraft engineering environment, including a minimum of two years of on-the-job training in an airline or an approved aircraft maintenance organisation.</li></ul><p>Safety Sensitive Role: <strong>Yes</strong></p><br><br>Salary &amp; benefits<p>Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it’s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Special Note – Jakarta Recruitment Event</b> <br><p>This vacancy is linked to Air Arabia’s upcoming <strong>invitation-only Engineering Recruitment Event in Jakarta, Indonesia</strong>.&nbsp; Candidates should apply to this vacancy only if they are available to attend the recruitment event in Jakarta during the <strong>last week of September 2026</strong>, subject to being shortlisted and invited by Air Arabia.&nbsp; Full event details, including venue, date, timing and interview schedule, will be shared only with shortlisted candidates prior to the event.</p><br><br><br><p>If you are interested in similar Air Arabia opportunities but are not available to attend the Jakarta event, please apply separately to the relevant non-event vacancy on the Air Arabia careers site.</p><br><br><b>Job Purpose</b> <br><p>The successful candidate will assist the Engineer in carrying out airframe and engine maintenance tasks on Air Arabia and third-party aircraft. The role includes supporting inspections, defect rectification, repairs, and component replacements to ensure aircraft serviceability and operational readiness.&nbsp; The position ensures that all assigned tasks are performed to the required technical standards and accurately recorded in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements.</p><br><br><b>Key Result Responsibilities</b> <br><strong>Operational Excellence</strong><br>&nbsp;<br><ul><li>Reviews assigned task cards with the Engineer-in-Charge to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.<br></li><li>Prepares and performs scheduled&nbsp;aircraft maintenance&nbsp;according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.<br></li><li>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.<br></li><li>Carries out repairs, component replacements and tests as instructed by assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.<br></li><li>Ensures proper tooling / equipment is drawn from stores to perform tasks, returning all of it in good condition following completion of work.<br></li><li>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with aircraft condition or with the execution of the work.<br></li><li>Demonstrates high level of consideration to housekeeping standards in all tasks performed.<br></li></ul>&nbsp;<br><strong>Safety</strong><br>&nbsp;<br><ul><li>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.<br></li><li>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.<br></li><li>Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.<br></li></ul>&nbsp;<br><strong>Reputation and Teamwork</strong><br>&nbsp;<br><ul><li>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks<br></li><li>Representing Air Arabia: &nbsp;presents a positive and competent image of technical professionalism to other companies’ personnel and ABY customers.<br></li></ul>&nbsp;<br><strong>Cost Awareness</strong><br>&nbsp;<br><ul><li>Maintains positive awareness to the cost of&nbsp;aircraft maintenance&nbsp;including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.<br></li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Qualified and experienced Civil&nbsp;Aircraft Maintenance&nbsp;Technician.<br></li><li>Ability to read, write, speak and understand English to a good standard for technical communications.<br></li><li>Ability to use computer (Microsoft Office).<br></li><li>Ability to obtain UAE Driver’s License.<br></li></ul><br><b>Work Experience</b> <br><ul><li>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</li><li>At least 2 years’ experience in Line / Base Maintenance environment.</li><li>Able to demonstrate solid basic understanding of&nbsp;Airframe&nbsp;and&nbsp;Engine&nbsp;Maintenance theory and practice.</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>HVAC Assistant Technician - Facility Maintenance</b></p><p><br></p><p>We are looking for HVAC Assistnat Technician to carryout preventative, corrective and breakdown maintenance on Mechanical / HVAC equipment and systems, individually or as part of a technical team, within a designated area, whilst ensuring minimal disruption to the operations.</p><p><br></p><p>An ideal candidate should carry out all technical and safety rules to ensure compliance with business standards.</p><p>&nbsp;&nbsp;</p><p>Key accountabilities</p><ul><li>Ability to conform to all general and specific technical safety requirements at all times to ensure the health, safety &amp; welfare of self and others at work</li><li>Any other work as assigned by the supervisor / duty engineer to achieve the purpose.</li><li>Good Knowledge of Building Management Systems (BMS)</li><li>Can read interpret and describe the functionality of HVAC system drawings (circuit &amp; wiring diagrams / schematic &amp; layout drawings) irrespective of manufacturer</li><li>Can correctly setup and use test equipment and interpret the test results on standalone and integrated HVAC systems, to include: Manifold Gauge, Digital Multi meter, Clamp Meter, Temperature / Humidity Meter, Vacuum Gauge and Refrigeration Leak Detector.</li><li>Knowledge in the use &amp; interpretation of Local and International Air Conditioning and Refrigeration Standards and Regulations</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Specific requirements</p><ul><li>Industrial Training Institute Diploma (2 year duration) in Air Conditioning &amp; Refrigeration Maintenance or equivalent (post high school)</li><li>Minimum 3 year experience within a Facility Management or similar environment.</li><li>Ability to communicate with staff, stakeholders and customers in oral and written English&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Ability to construct technical reports and spreadsheets and presentations using MS Office (Word / Excel / Power point).</li><li>Ability to perform safely and correctly the following on complex air conditioning and refrigeration (HVAC) equipment and systems.</li><li>Electrical &amp; Mechanical Isolations and LOTO.</li><li>Planned preventative maintenance (PM) routines</li><li>Corrective maintenance (CM)</li><li>Breakdown maintenance (BD), to include: Air Handling Units, Fan Coil Units, Exhaust, Fresh Air and Extraction Fan, Air Conditioning Systems, Package Units, Ducted Split Units, Decorative Split Units, Window Units, Computer &amp; Server Room Air conditioning Units (CRACUs) and Humidifiers &amp; Dehumidifiers.</li></ul><p><br></p></div>

<ul><li><p>Exercising their license/approval in relation to the accomplishment of scheduled, unscheduled maintenance and rectification of defects to ensure maintenance is accomplished to the required standards and the operating programme is achieved in an efficient and safe manner. &nbsp;</p></li><li><p>Recording and issuing of Certificates of Release to Service for the work accomplished in accordance with the current Maintenance Data, Company procedures and associated Regulatory requirements.</p></li><li><p>Reviewing the work and resources allocated and required to ensure expedient rectification of defects utilising allocated staff.</p></li><li><p>Advising the Maintenance Manager of any impending service disruptions, problems or areas of concern that may have an impact on the operating programme. &nbsp;Keeping the Maintenance Manager informed of all work performed by him during his duty period.</p></li><li><p>Ensuring staff under his immediate control adhere to published technical and safety requirements defined in published manuals and other publications.</p></li><li><p>Defining priorities to the staff allocated to him to ensure that efficient use of resources are channelled to an on time and safe flight departure.</p></li><li><p>Ensuring documentation and its certification is completed in a timely manner and to the defined procedures to meet Company requirements.</p></li><li><p>Ensure that replacement parts and components are of an approved type, correctly certified and released and are physically inspected prior to fitment to the aircraft or component. &nbsp;Ensure that removed components are correctly handled, labelled and blanked.</p></li><li><p>When supervising the work of others, ensuring that acceptable standards of workmanship and quality are maintained and the correct tools are employed to accomplish the task.</p></li><li><p>Reporting and compilation of technical delay reports in a timely manner, reporting significant defects, discrepancies, incidents, accidents and events as required.</p></li><li><p>Ensuring arriving aircraft are met by either the Certifying Engineer or Technician and crews are suitably debriefed to ensure defects are accurately defined and recorded.</p></li><li><p>Undertaking such other duties as may be reasonably directed by the Maintenance Manager.</p></li><li><p>Ensuring all safety precautions are complied with and actively participate in the Company SMS</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><u>Minimum Qualifications / Experience:</u></p><ul><li><p>Valid CAR 66 or EASA B1 or B1/B2 Aircraft Maintenance License</p></li><li><p>Airbus A318/A319/A320 Type Rating is required</p></li><li><p>Additional type ratings on Bombardier Global Express, Falcon 6X/7X, and Challenger 604/605/650 are preferred</p></li><li><p>Minimum of 5 years’ experience in a corporate / VIP aviation environment</p></li><li><p>Prior Middle East experience is an advantage</p></li></ul><br><p><u>Job-Specific Skills:</u></p><ul><li><p>Detail oriented methodical approach to solving/performing tasks&nbsp;</p></li><li><p>Ability to handle multiple tasks and work under pressure&nbsp;</p></li><li><p>Pride in performing to the best of own ability&nbsp;</p></li><li><p>Good communications and interpersonal skills&nbsp;</p></li></ul></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>The Flight Engineer will ensure proper maintenance of aircraft and expedient rectification of aircraft defects as directed by the Maintenance Manager.&nbsp; He will also provide supervision of maintenance staff, allocated to them by the Maintenance Manager, and ensure safe and on time dispatch of aircraft under their control.</p><br><p><u>Primary Duties:&nbsp;</u></p><ul><li><p>Exercising their license/approval in relation to the accomplishment of scheduled, unscheduled maintenance and rectification of defects to ensure maintenance is accomplished to the required standards and the operating programme is achieved in an efficient and safe manner. &nbsp;</p></li><li><p>Recording and issuing of Certificates of Release to Service for the work accomplished in accordance with the current Maintenance Data, Company procedures and associated Regulatory requirements.</p></li><li><p>Reviewing the work and resources allocated and required to ensure expedient rectification of defects utilising allocated staff.</p></li><li><p>Advising the Maintenance Manager of any impending service disruptions, problems or areas of concern that may have an impact on the operating programme. &nbsp;Keeping the Maintenance Manager informed of all work performed by him during his duty period.</p></li><li><p>Ensuring staff under his immediate control adhere to published technical and safety requirements defined in published manuals and other publications.</p></li><li><p>Defining priorities to the staff allocated to him to ensure that efficient use of resources are channelled to an on time and safe flight departure.</p></li><li><p>Ensuring documentation and its certification is completed in a timely manner and to the defined procedures to meet Company requirements.</p></li><li><p>Ensure that replacement parts and components are of an approved type, correctly certified and released and are physically inspected prior to fitment to the aircraft or component. &nbsp;Ensure that removed components are correctly handled, labelled and blanked.</p></li><li><p>When supervising the work of others, ensuring that acceptable standards of workmanship and quality are maintained and the correct tools are employed to accomplish the task.</p></li><li><p>Reporting and compilation of technical delay reports in a timely manner, reporting significant defects, discrepancies, incidents, accidents and events as required.</p></li><li><p>Ensuring arriving aircraft are met by either the Certifying Engineer or Technician and crews are suitably debriefed to ensure defects are accurately defined and recorded.</p></li><li><p>Undertaking such other duties as may be reasonably directed by the Maintenance Manager.</p></li><li><p>Ensuring all safety precautions are complied with and actively participate in the Company SMS.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><u>Minimum Qualifications / Experience:</u></p><ul><li><p>Valid CAR 66 or EASA B1 or B1/B2 Aircraft Maintenance License</p></li><li><p>Airbus A318/A319/A320 Type Rating is required</p></li><li><p>Additional type ratings on Bombardier Global Express, Falcon 6X/7X, and Challenger 604/605/650 are preferred</p></li><li><p>Minimum of 5 years’ experience in a corporate / VIP aviation environment</p></li><li><p>Prior Middle East experience is an advantage</p></li></ul><br><p><u>Job-Specific Skills:</u></p><ul><li><p>Detail oriented methodical approach to solving/performing tasks&nbsp;</p></li><li><p>Ability to handle multiple tasks and work under pressure&nbsp;</p></li><li><p>Pride in performing to the best of own ability&nbsp;</p></li><li><p>Good communications and interpersonal skills</p></li></ul></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking a Port Engineer to join our client's marine operations team based in Abu Dhabi, UAE. This is a permanent office-based role with regular vessel visits, drydock attendance, and port travel as required, providing technical management and oversight of the company's owned and long-term chartered vessel fleet.<br></p><br><p>You will be responsible for ensuring vessels are maintained in full compliance with class, flag state, statutory, and client requirements while overseeing planned maintenance, drydock execution, technical procurement, and vendor management. Working closely with vessel Masters, Chief Engineers, class societies, shipyards, and technical service providers, you will ensure fleet reliability, regulatory compliance, and operational readiness across all assigned vessels.<br></p><br><span>Key Responsibilities:</span><br>- Manage the Planned Maintenance System (PMS) across the assigned vessel fleet, ensuring maintenance activities are completed in accordance with manufacturer recommendations, class requirements, flag state regulations, and company procedures.<br><br>- Plan, prepare, and oversee drydock projects, including repair specifications, work scopes, shipyard coordination, budget control, and attendance during key inspection and execution milestones.<br><br>- Coordinate the procurement of technical spares, machinery, equipment, and specialist services to maintain vessel operational readiness while ensuring cost-effective purchasing and timely delivery.<br><br>- Review and monitor technical service reports, maintenance records, class surveys, statutory inspections, and certificate validity to ensure continuous compliance across the fleet.<br><br>- Investigate machinery failures, equipment breakdowns, and technical defects, working closely with vessel engineers and service providers to identify root causes and implement effective corrective actions.<br><br>- Manage technical contractors, repair vendors, OEMs, and service providers, ensuring work is completed safely, efficiently, within budget, and to the required quality standards.<br><br>- Ensure compliance with flag state, class society, ISM Code, statutory regulations, and ADNOC or other client-specific technical requirements for all assigned vessels.<br><br>- Support vessel inspections, technical audits, client vetting processes, pre-charter surveys, and regulatory inspections by preparing technical documentation and coordinating corrective actions where required.<br><br>- Monitor technical maintenance budgets, repair costs, spare parts expenditure, and operational performance, providing regular reporting and cost control recommendations to management.<br><br>- Maintain accurate technical documentation, maintenance history, equipment records, and fleet reporting systems while driving continuous improvements in vessel reliability, safety, and technical performance.<br><br><br><span>Requirements-&nbsp;Class 1 or Class 2 Marine Engineering Certificate of Competency (CoC/OOW).<br><br>-&nbsp;Bachelor's Degree in Marine Engineering, Naval Architecture, or a related engineering discipline is advantageous.<br><br>- Proven experience as a Technical Superintendent, Marine Superintendent, Fleet Technical Manager, or similar shore-based technical role managing commercial vessel fleets.<br><br>- Strong knowledge of planned maintenance systems (PMS), drydock planning, machinery maintenance, technical procurement, and vessel repair management.<br><br>- Excellent understanding of class society requirements, flag state regulations, statutory compliance, ISM Code, and marine engineering best practices.<br><br>- Experience coordinating shipyards, class surveyors, technical vendors, OEMs, and repair contractors.<br><br>- Strong problem-solving, budgeting, stakeholder management, and technical reporting skills.<br><br>- Experience supporting offshore support vessels, workboats, tugs, barges, or similar commercial marine assets is advantageous.<br><br><span>Certifications (Please attach below certificates)</span><br>- Valid Engineer Officer Certificate of Competency (Class 1 or Class 2 CoC).<br><br>- Valid STCW certification.<br><br>- Previous experience working with recognised Class Societies is preferred.<br><br>- ADNOC approval or previous experience supporting ADNOC marine operations is highly advantageous.<br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br>- Permanent employment with a leading offshore and marine engineering organization<br><br>- Opportunity to provide technical management and fleet support for offshore support vessels, workboats, and other commercial marine assets<br><br>- Exposure to vessel drydock projects, planned maintenance systems, class compliance, technical procurement, and fleet engineering operations<br><br>- Opportunity to work closely with shipyards, class societies, OEMs, vessel crews, and leading offshore energy clients to enhance fleet performance and reliability<br><br>- Long-term career growth and progression into senior technical fleet management and marine engineering leadership roles within a stable organization<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with copies of your relevant marine certifications.<br><br></span><p>Shortlisted candidates will be contacted within 5 working days of application.<br></p><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Marine Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br><br> </div>

<ul><li>Conduct routine maintenance and safety inspections on elevators, ensuring compliance with industry standards and regulations.</li><li>Diagnose and troubleshoot complex electrical and mechanical issues in elevator systems, employing advanced problem-solving skills.</li><li>Install new elevator systems and components, adhering to blueprints and manufacturer specifications for optimal performance.</li><li>Respond promptly to emergency repair requests, minimizing downtime and ensuring passenger safety with effective solutions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>High school diploma or equivalent</p></li><li><p>Must have a valid UAE residence visa</p></li><li><p>1-5 years of experience in this field , if not willingness to learn with the team</p></li></ul>

<ul><li><p>Perform preventive and breakdown maintenance for manufacturing machines.</p></li><li><p>Troubleshoot mechanical issues and carry out corrective actions.</p></li><li><p>Maintain motors, pumps, bearings, conveyors, palletizers, and packaging equipment.</p></li><li><p>Handle maintenance activities for key technologies, multivac machines and auxiliary systems.</p></li><li><p>Monitor machine performance and improve operational efficiency.</p></li><li><p>Replace defective mechanical parts and ensure proper machine alignment and calibration.</p></li><li><p>Support production team during machine setup and changeover activities.</p></li><li><p>Maintain maintenance records and daily reports.</p></li><li><p>Follow safety procedures and company maintenance standards.</p></li><li><p>Coordinate with OEM service engineers when required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>3+ years of similar experience as a maintenance technician.</p></li><li><p>English language proficiency - Reading, Writing, Listening & Speaking.</p></li><li><p>Technical maintenance experience in Blow Molding Krones ErgoBloc machines. </p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>About Us</strong></span></span></p><br><p><span><span>Welcome to voco. Drawing on our years of experience in delivering True Hospitality, voco Hotels, gives people a different choice. Hotels that are reliable enough to depend on, but different enough to be fun. Our new family of hotels are connected by their individual characters that make memorable travel dependable. Unstuffy hotels, where people feel comfortable to relax, and just get on with relaxing. Hotels that stand out from the crowd.</span></span></p><br><p><span><span>Becoming part of the family, everyone’s a host…</span></span></p><br><p><span><span>Every great stay starts with a great host, who are the beating heart of our hotels. Our teams are there when people need them but, give them space to relax. It’s these thoughtful touches that give our service the balance guests adore: natural and easy-going but, also friendly without being over the top.</span></span></p><br><p><span><span>voco Dubai Palm The Palm is conveniently located on the trunk of the manmade island while being part of “Palm West Beach”, a trendy and vibrant spot with an array of exceptional dining concepts.&nbsp;</span></span></p><br><p><span><span><strong>Your day to day</strong></span></span></p><br><p><span><span>&nbsp;As a General Technician, you will be responsible for carrying out preventative and corrective maintenance works related to electrical, mechanical, plumbing, carpentry, painting, HVAC and general building services throughout the hotel. You will ensure that all hotel facilities, equipment and guest areas are maintained in a safe, efficient and operational condition while providing prompt support to guests and operational departments.</span></span></p><br><p><span><span><strong>General Tasks and Responsibilities:</strong></span></span></p><br><ul><li><p><span><span>Proper handling of engineering repair and maintenance supplies, spare parts, machines, tools, and equipment.</span></span></p><br></li><li><p><span><span>Carry out preventive and corrective maintenance as per the Engineering Maintenance Schedule to avoid breakdowns and equipment failures.</span></span></p><br></li><li><p><span><span>Attend and complete maintenance requests and work orders promptly and efficiently.</span></span></p><br></li><li><p><span><span>Ensure all hotel equipment, fixtures, furniture, and building services are functioning properly and&nbsp;maintained&nbsp;to hotel standards.</span></span></p><br></li><li><p><span><span>Perform routine inspections of guest rooms, public areas, back-of-house areas, and plant rooms.</span></span></p><br></li><li><p><span><span>Troubleshoot and repair minor electrical, mechanical, plumbing, carpentry, painting, and HVAC-related issues.</span></span></p><br></li><li><p><span><span>Coordinate with Team Leader, Duty Engineer, or Maintenance Engineer&nbsp;regarding&nbsp;work schedules and obtain proper instructions for assigned tasks.</span></span></p><br></li><li><p><span><span>Ensure all Engineering Standard Operating Procedures and safety procedures are followed during maintenance activities.</span></span></p><br></li><li><p><span><span>Submit necessary reports and update maintenance records as required by the Team Leader, Duty Engineer, or Maintenance Engineer.&nbsp;</span></span></p><br></li><li><p><span><span>Coordinate with concerned departments in a courteous and efficient manner before carrying out maintenance work.&nbsp;</span></span></p><br></li><li><p><span><span>Maintain cleanliness and organization of workshops, plant rooms, and work areas.&nbsp;</span></span></p><br></li><li><p><span><span>Be an active participant in the Hotel Energy Conservation Program.&nbsp;</span></span></p><br></li><li><p><span><span>Understand and strictly adhere to the Rules &amp; Regulations&nbsp;established&nbsp;in the Colleagues’ Code of Ethics and the Hotel’s policies on Fire, Hygiene, Health, Safety, and Environmental&nbsp;standards.&nbsp;</span></span></p><br></li></ul><p><span><span><strong>What we need from you</strong></span></span></p><br><ul><li><span><span>Certified in Electrical Engineering is desirable</span></span></li><li><span><span>Two years’ operating experience in a hotel Engineering department.</span></span></li><li><span><span>A naturally outgoing and friendly personality with a passion for service excellence to consistently deliver and demonstrate voco service standards&nbsp;</span></span></li><li><p><span><span>A true “team-player” mentality and flexible attitude towards a diverse set of tasks</span></span></p><br></li></ul><p><span><span><strong>What we offer</strong></span></span></p><br><p><span><span>We’ll reward all your hard work with great salary and benefits – in addition to career development, employee room discounts and great work culture. Join us and you’ll become part of the global IHG family – and like all families, all our individual team members share some winning characteristics.&nbsp;</span></span></p><br><p><span><span>As a team, we work better together – we trust and support each other, we do the right thing and we welcome different perspectives. You need to show us you care, that you notice the little things that make a difference to guests as well as always looking for ways to improve -visit <u>www.http://careers.ihg.com</u>to find out more about us.&nbsp;</span></span></p><br><p><span><span>At IHG, we are committed to developing our team and managing our talent and would encourage internal as well as external candidates to apply for any of our vacancies. We are an equal opportunities employer.</span></span></p><br><br> </div>

<ul><li><p>Handle maintenance activities for key technologies, multivac machines and auxiliary systems.</p></li><li><p>Maintain motors, pumps, bearings, conveyors, palletizers, and packaging equipment.</p></li><li><p>Troubleshoot mechanical issues and carry out corrective actions.</p></li><li><p>Monitor machine performance and improve operational efficiency.</p></li><li><p>Replace defective mechanical parts and ensure proper machine alignment and calibration.</p></li><li><p>Support production team during machine setup and changeover activities.</p></li><li><p>Maintain maintenance records and daily reports.</p></li><li><p>Follow safety procedures and company maintenance standards.</p></li><li><p>Coordinate with OEM service engineers when required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A minimum 3 years of experience as a maintenance technician / packaging technician. </p></li><li><p>English language proficiency - Reading, Writing, Listening & Speaking. </p></li><li><p>Proven experience working with Multivac, Messpack, Pattyn and Single wrap chocolate machines. </p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About the Role</b></p><p>&nbsp;</p><p>The Flight Engineer will ensure proper maintenance of aircraft and expedient rectification of aircraft defects as directed by the Maintenance Manager.&nbsp;He will also provide supervision of maintenance staff, allocated to them by the Maintenance Manager, and ensure safe and on time dispatch of aircraft under their control.</p><p>&nbsp;</p><p><u>Primary Duties:&nbsp;</u></p><ul><li>Exercising their license/approval in relation to the accomplishment of scheduled, unscheduled maintenance and rectification of defects to ensure maintenance is accomplished to the required standards and the operating programme is achieved in an efficient and safe manner.&nbsp;</li><li>Recording and issuing of Certificates of Release to Service for the work accomplished in accordance with the current Maintenance Data, Company procedures and associated Regulatory requirements.</li><li>Reviewing the work and resources allocated and required to ensure expedient rectification of defects utilising allocated staff.</li><li>Advising the Maintenance Manager of any impending service disruptions, problems or areas of concern that may have an impact on the operating programme.&nbsp;Keeping the Maintenance Manager informed of all work performed by him during his duty period.</li><li>Ensuring staff under his immediate control adhere to published technical and safety requirements defined in published manuals and other publications.</li><li>Defining priorities to the staff allocated to him to ensure that efficient use of resources are channelled to an on time and safe flight departure.</li><li>Ensuring documentation and its certification is completed in a timely manner and to the defined procedures to meet Company requirements.</li><li>Ensure that replacement parts and components are of an approved type, correctly certified and released and are physically inspected prior to fitment to the aircraft or component.&nbsp;Ensure that removed components are correctly handled, labelled and blanked.</li><li>When supervising the work of others, ensuring that acceptable standards of workmanship and quality are maintained and the correct tools are employed to accomplish the task.</li><li>Reporting and compilation of technical delay reports in a timely manner, reporting significant defects, discrepancies, incidents, accidents and events as required.</li><li>Ensuring arriving aircraft are met by either the Certifying Engineer or Technician and crews are suitably debriefed to ensure defects are accurately defined and recorded.</li><li>Undertaking such other duties as may be reasonably directed by the Maintenance Manager.</li><li>Ensuring all safety precautions are complied with and actively participate in the Company SMS.</li></ul><p>&nbsp;</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><u>Minimum Qualifications / Experience:</u></p><ul><li>Valid CAR 66 or EASA B1 or B1/B2 Aircraft Maintenance License</li><li>Airbus A318/A319/A320 Type Rating is required</li><li>Additional type ratings on Bombardier Global Express, Falcon 6X/7X, and Challenger 604/605/650 are preferred</li><li>Minimum of 5 years’ experience in a corporate / VIP aviation environment</li><li>Prior Middle East experience is an advantage</li></ul><p>&nbsp;</p><p><u>Job-Specific Skills:</u></p><ul><li>Detail oriented methodical approach to solving/performing tasks&nbsp;</li><li>Ability to handle multiple tasks and work under pressure&nbsp;</li><li>Pride in performing to the best of own ability&nbsp;</li><li>Good communications and interpersonal skills&nbsp;</li><li>&nbsp;</li></ul><p>&nbsp;</p><p>&nbsp;</p><p><b>Please attach your aircraft maintenance engineer license in one file with your CV. Only applications with license will be considered.&nbsp;</b></p><p>&nbsp;</p><p>All positions are full time contract, with permanent residency in Dubai.&nbsp;Applicants must be a permanent resident of Dubai or be willing to relocate.&nbsp;Please ensure you specify the role you are qualified for – only those with the required qualifications will be contacted.</p><p><br></p><p><br></p></div>

<ul><li>Perform routine maintenance and inspections on generators, ensuring optimal performance and preventing unexpected failures.</li><li>Diagnose and troubleshoot electrical and mechanical issues within generator systems, using advanced diagnostic tools and techniques.</li><li>Conduct load testing and analysis to verify generator capacity and efficiency under various operating conditions.</li><li>Repair and replace faulty components, including alternators, starters, control panels, and wiring, to restore generator functionality.</li><li>Install and commission new generator sets, adhering to electrical codes and manufacturer specifications for seamless integration.</li><li>Maintain detailed records of maintenance activities, repairs, and parts used for accurate tracking and reporting.</li><li>Respond to emergency calls and provide on-site support to resolve generator-related issues, minimizing downtime.</li><li>Collaborate with other technicians and engineers to ensure efficient and coordinated generator system operations.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>. Five years work experience with hands on knowledge on gensets & control panels. . Basic knowledge of processors, protection relays, metering & cabling . Genset installation and testing knowledge is a must. . Should be able to work independently and communicate with customers / consultants etc . Driving license is prerequisite. . Multi lingual is an advantage. . Basic computer and documentation knowledge is desirable. </p>