Maintenance Technician Jobs in UAE

Requirement - Engineering Technician Location - Dubai Industry - Pharmaceutical Engineering Division experience Must Qualification - Diploma Bachelor in Electrical / Mechanical Engineering Experience - 9-10 years in Pharma Manufacturing Responsibilities<br>1.⁠ ⁠Perform routine and preventive maintenance on production equipment, including tablet presses, granulators, blenders, coating pans, and primary2.⁠ ⁠Troubleshoot and repair mechanical, electrical, and pneumatic issues, utilizing advanced diagnostic tools3.⁠ ⁠Assist in the installation, qualification, and validation of new equipment, including factory acceptance testing4.⁠ ⁠Monitor and maintain critical utility systems, including HVAC systems, purified water generation and distribution, compressed air systems5.⁠ ⁠Conduct performance testing and calibration of instruments and equipment6.⁠ ⁠Support the development and implementation of maintenance strategies, including reliability-centered maintenance7.⁠ ⁠Ensure compliance with c GMP, FDA, EUGMP, MHRA, SFDA and Local MOHAP regulations8.⁠ ⁠Perform energy audits on utilities and equipment to identify opportunities9.⁠ ⁠Provide technical support during regulatory audits10.⁠ ⁠Participate in the development and revision of standard operating procedures (SOPs)

Position Technician – ELV / AV / Building Automation Location Dubai, UAEEmployment Type Full-Time<br>About the Role ME Integra is seeking a dedicated and experienced Technician to join our technical team. The ideal candidate will be responsible for the installation, testing, commissioning, maintenance, and troubleshooting of ELV, Audio Visual, Building Automation, and Smart Home systems while ensuring projects are completed to the highest quality standards. Key Responsibilities Install, terminate, test, and commission ELV systems. Install and configure Audio Visual (AV) equipment, including displays, projectors, speakers, amplifiers, and control systems. Install and commission Building Automation Systems (BAS/BMS). Carry out installation and troubleshooting of Smart Home Automation systems. Perform installation and maintenance of HVAC controls, lighting control systems, and other automation solutions. Read and interpret technical drawings, wiring diagrams, and schematics. Conduct testing, fault diagnosis, and preventive maintenance. Coordinate with project engineers, supervisors, and other trades to ensure timely project completion. Maintain proper documentation of work completed and report site progress. Ensure all work complies with company quality standards and safety regulations. Attend client sites for service, maintenance, and technical support when required. Requirements Minimum 4 years of experience in ELV, AV, Building Automation, or related systems. Hands-on experience with:ELV Systems Audio Visual (AV) Systems Building Automation Systems (BAS/BMS) HVAC Controls Lighting Control Systems Smart Home Automation Ability to read technical drawings and wiring diagrams. Strong troubleshooting and problem-solving skills. Good communication and site coordination abilities. Ability to work independently and as part of a team. UAE driving license is an added advantage. Preferred Skills Knowledge of KNX, BACnet, Modbus, DALI, or similar automation protocols. Experience with system commissioning and programming support. Customer-oriented attitude with good interpersonal skills. Strong organizational and time management skills. What We Offer Competitive salary based on experience. Opportunity to work on premium residential and commercial projects. Professional growth and technical development. Supportive and collaborative work environment. How to Apply Interested candidates may send their CV to:admin@meintegra.aeprojects@meintegra.aeaccounts@meintegra.aeLocation: Dubai, UAEImmediate joiners will be given preference.

Position Technician – ELV / AV / Building Automation Location Dubai, UAEEmployment Type Full-Time<br>About the Role ME Integra is seeking a dedicated and experienced Technician to join our technical team. The ideal candidate will be responsible for the installation, testing, commissioning, maintenance, and troubleshooting of ELV, Audio Visual, Building Automation, and Smart Home systems while ensuring projects are completed to the highest quality standards. Key Responsibilities Install, terminate, test, and commission ELV systems. Install and configure Audio Visual (AV) equipment, including displays, projectors, speakers, amplifiers, and control systems. Install and commission Building Automation Systems (BAS/BMS). Carry out installation and troubleshooting of Smart Home Automation systems. Perform installation and maintenance of HVAC controls, lighting control systems, and other automation solutions. Read and interpret technical drawings, wiring diagrams, and schematics. Conduct testing, fault diagnosis, and preventive maintenance. Coordinate with project engineers, supervisors, and other trades to ensure timely project completion. Maintain proper documentation of work completed and report site progress. Ensure all work complies with company quality standards and safety regulations. Attend client sites for service, maintenance, and technical support when required. Requirements Minimum 4 years of experience in ELV, AV, Building Automation, or related systems. Hands-on experience with:ELV Systems Audio Visual (AV) Systems Building Automation Systems (BAS/BMS) HVAC Controls Lighting Control Systems Smart Home Automation Ability to read technical drawings and wiring diagrams. Strong troubleshooting and problem-solving skills. Good communication and site coordination abilities. Ability to work independently and as part of a team. UAE driving license is an added advantage. Preferred Skills Knowledge of KNX, BACnet, Modbus, DALI, or similar automation protocols. Experience with system commissioning and programming support. Customer-oriented attitude with good interpersonal skills. Strong organizational and time management skills. What We Offer Competitive salary based on experience. Opportunity to work on premium residential and commercial projects. Professional growth and technical development. Supportive and collaborative work environment. How to Apply Interested candidates may send their CV to:admin@meintegra.aeprojects@meintegra.aeaccounts@meintegra.aeLocation: Dubai, UAEImmediate joiners will be given preference.

Company Description Rafi Auto Workshop is a fully equipped and advanced automobile service provider located in Mussafah, Abu Dhabi, specializing in preventive and predictive maintenance for both light and heavy-duty vehicles. Established in 1984, the workshop has grown into one of the region’s most reliable and well-regarded service centers. Rafi Auto Workshop collaborates with insurance companies, corporate clients, and individual vehicle owners to deliver consistent, high-quality service. A highly dedicated and experienced technical team supports a full range of auto services and accident repairs at competitive rates, with customer satisfaction as the top priority.<br>Role Description The Transport Refrigeration Technician (Chiller Vehicle) is a full-time, on-site role based in the Abu Dhabi Emirate, United Arab Emirates. The technician will install, maintain, and repair refrigeration and chiller systems on transport vehicles, ensuring optimal performance and temperature control. Daily tasks include diagnosing mechanical, electrical, and refrigeration issues, performing scheduled preventive maintenance, and completing detailed service reports. The role involves working with tools and testing equipment, following safety standards, coordinating with service advisors, and communicating clearly with customers and team members to plan repairs and minimize vehicle downtime.<br>Qualifications<br> Strong skills in Preventive Maintenance, with experience planning and performing scheduled service on refrigeration and vehicle systems. Proficiency in Troubleshooting and fault diagnosis for mechanical, electrical, and refrigeration-related issues in chiller vehicles. Solid understanding of Electricity and basic automotive electrical systems relevant to transport refrigeration units. Hands-on experience in Maintenance & Repair of transport refrigeration units, compressors, condensers, evaporators, and related components. Knowledge of HVAC systems, temperature control, refrigerants, and safe handling practices. Relevant technical diploma or certification in automotive, refrigeration, or HVAC technology; trade test or manufacturer training is an advantage. Ability to read and interpret technical manuals, wiring diagrams, and service procedures, with attention to detail and safety compliance. Good communication skills, ability to work in a team, and flexibility to handle multiple vehicles and urgent repair requests. Previous experience in an auto workshop or transport refrigeration environment, preferably within the GCC region, is beneficial.

Job Purpose<br><br>The Draftsman is responsible for preparing, updating, and maintaining technical drawings, plans, diagrams, and engineering documentation to support municipal infrastructure, transportation, road, and public works projects. The role assists engineers and technical teams by producing accurate drawings and layouts in accordance with approved specifications, drafting standards, municipal regulations, and project requirements. The Draftsman contributes to the effective planning, design, construction, and maintenance of municipal assets and transportation infrastructure.<br><br>Key Responsibilities<br><br>Drafting & Drawing Preparation<br><br>Prepare technical drawings, plans, layouts, sections, profiles, and detailed illustrations based on engineering and project requirements. Convert sketches, concepts, field measurements, and engineering data into accurate technical drawings. Produce drawings for roads, transportation facilities, utilities, municipal infrastructure, landscaping, and public facilities projects. Assist in the preparation of design and construction drawings. Ensure drawing accuracy and completeness prior to submission for review.<br><br>Drawing Revision & Maintenance<br><br>Update existing drawings to reflect approved design changes and project modifications. Maintain drawing records, revisions, and version controls. Revise drawings based on comments and feedback received from engineers and project teams. Prepare final drawing packages for project implementation and documentation purposes. Ensure proper filing and archiving of all drawings and related documentation.<br><br>CAD Operations<br><br>Utilize Auto CAD and other approved drafting software to prepare and edit drawings. Develop digital drawing files in accordance with organizational drafting standards. Organize electronic drawing libraries and project documentation. Ensure compliance with CAD standards, layering conventions, and drawing templates.<br><br>Project Support<br><br>Support engineers and technical staff in preparing project documentation and design deliverables. Assist in gathering technical information necessary for drawing preparation. Coordinate with project teams to obtain updates and clarifications on drawing requirements. Participate in design review meetings and incorporate approved modifications into drawings.<br><br>Site Verification Support<br><br>Conduct site visits when required to collect measurements and verify existing site conditions. Assist in preparing as-built drawings based on project completion data. Verify dimensions, locations, and technical information for drafting accuracy. Coordinate with survey and engineering teams regarding field data.<br><br>Documentation & Compliance<br><br>Ensure drawings comply with approved engineering standards, municipal regulations, and project specifications. Assist in maintaining engineering records and documentation systems. Support quality control reviews and technical audits related to project drawings. Report drawing discrepancies and design coordination issues to supervisors.<br><br>Continuous Improvement<br><br>Stay updated with drafting software, technologies, and industry best practices. Support improvements to drafting standards, templates, and workflows. Participate in training and professional development initiatives.<br><br>Qualifications & Experience<br><br>Educational Qualifications<br><br>Diploma in Drafting, Civil Engineering Technology, Architectural Drafting, Engineering Technology, or a related field. Technical certifications in Auto CAD or drafting software are preferred.<br><br>Experience<br><br>2-5 years of experience in drafting and technical drawing preparation. Experience within municipal infrastructure, transportation, roads, public works, utilities, or construction projects is preferred. Familiarity with engineering drawing standards and construction documentation requirements.<br><br>Technical Competencies<br><br>Proficiency in Auto CAD and related drafting software. Basic knowledge of Civil 3D, Revit, BIM, or similar design tools is an advantage. Understanding of engineering drawings, plans, scales, dimensions, and technical specifications. Knowledge of drafting standards and document control practices. Proficiency in Microsoft Office applications.<br><br>KPIs<br><br>Drafting Performance<br><br>Percentage of drawings completed within target deadlines. Number of drawing packages delivered as scheduled. Accuracy rate of drawings submitted for review.<br><br>Quality Assurance<br><br>Number of drawing errors identified during reviews. Compliance with drafting standards and project specifications. Percentage of drawings approved without major revisions.<br><br>Project Support<br><br>Timely completion of assigned drafting tasks. Responsiveness to engineering and project team requests. Number of projects successfully supported.<br><br>Document Management<br><br>Accuracy of drawing revision records. Compliance with document control procedures. Proper maintenance and archiving of project drawings.<br><br>Productivity<br><br>Average turnaround time for drawing revisions. Volume of drawings completed per reporting period. Achievement of assigned workload targets.<br><br>Stakeholder Satisfaction<br><br>Satisfaction level of engineers and internal clients. Quality and reliability of drafting support provided.<br><br>Job Challenges<br><br>Managing multiple drawing requests and competing project deadlines. Maintaining high accuracy while handling large volumes of technical documentation. Adapting to frequent design modifications and project changes. Coordinating drawing revisions across different project stakeholders. Ensuring compliance with municipal standards, regulations, and engineering requirements. Working with incomplete or evolving project information. Keeping up to date with changing drafting technologies and software applications. Supporting complex infrastructure and transportation projects requiring detailed technical accuracy.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Date Palm Tissue Culture Technician is responsible for the initiation, maintenance, multiplication, and acclimatization of date palm ( Phoenix dactylifera L .<br>) plantlets using in vitro tissue culture techniques.<br> The technician will support large-scale micropropagation, ensure culture quality, and maintain sterile laboratory operations in compliance with standard protocols.<br> Scope of Work / Deliverables Initiate and maintain date palm explants (shoot meristems, somatic embryos) under aseptic conditions Prepare and sterilize culture media, reagents, and consumables Perform subculturing, multiplication, shooting and rooting of in vitro cultures Monitor cultures for contamination, physiological disorders, and growth performance Conduct somatic embryogenesis and organogenesis protocols.<br> Assist with acclimatization and hardening of plantlets in the greenhouse.<br> Maintain detailed records of cultures, protocols, and production output Follow laboratory safety, hygiene, and quality control procedures Support protocol optimization and scaling-up activities Bachelor’s degree in Biotechnology, Plant Pathology, Agronomy, Horticulture, Biological Sciences, or a related field.<br> (Associate degree/Diploma with relevant hands-on lab experience will also be considered) Hands-on experience in plant tissue culture, preferably with date palm Strong knowledge of aseptic techniques and culture media preparation Plant tissue transformation Hands-on experience in plant tissue culture, preferably with date palm Strong knowledge of aseptic techniques and culture media preparation Plant tissue transformation</span> </div>

Company Description Ace Building Maintenance provides comprehensive building maintenance services across the UAE, focusing on safety, efficiency, and visual appeal. The company supports a wide range of residential, commercial, and industrial properties with reliable, professional service. Teams are dedicated to keeping facilities in optimal condition through planned maintenance and responsive support. Ace Building Maintenance offers a stable, service-oriented environment for individuals who take pride in quality workmanship and customer satisfaction.<br>Role Description The Driver Cum MEP Technician is a full-time, on-site role based in Dubai, responsible for both transportation and basic mechanical, electrical, and plumbing (MEP) tasks. Day-to-day activities include safely operating company trucks to transport tools, materials, and personnel to various job sites, following all road safety regulations and company procedures. The role also involves assisting with routine MEP maintenance, minor repairs, and installations under the guidance of senior technicians, ensuring work is completed to company standards. The individual will complete daily vehicle checks, keep accurate logs of trips and work performed, and maintain a clean, organized vehicle and work area. Regular interaction with clients and colleagues is expected, requiring clear communication, professional conduct, and a strong focus on service quality.<br>Qualifications<br> Candidates should possess strong truck driving skills, including safe operation of commercial vehicles and familiarity with basic truck maintenance. Candidates should possess a valid CDL Class A (or equivalent UAE heavy vehicle license) and a clean driving record. Candidates should possess effective communication skills for coordinating with team members and reporting work progress. Candidates should possess customer service skills to interact professionally with clients and represent the company positively. Candidates should possess foundational mechanical, electrical, and plumbing (MEP) knowledge, with experience in building maintenance preferred. Candidates should possess the ability to read basic work orders and safety instructions and follow standard operating procedures. Candidates should possess a strong focus on safety, reliability, time management, and working in diverse indoor and outdoor environments. Candidates should possess a high school diploma or equivalent; technical certifications in MEP or building maintenance are an advantage.

Company Description Ace Building Maintenance provides comprehensive building maintenance services across the UAE, focusing on safety, efficiency, and visual appeal. The company supports a wide range of residential, commercial, and industrial properties with reliable, professional service. Teams are dedicated to keeping facilities in optimal condition through planned maintenance and responsive support. Ace Building Maintenance offers a stable, service-oriented environment for individuals who take pride in quality workmanship and customer satisfaction.<br>Role Description The Driver Cum MEP Technician is a full-time, on-site role based in Dubai, responsible for both transportation and basic mechanical, electrical, and plumbing (MEP) tasks. Day-to-day activities include safely operating company trucks to transport tools, materials, and personnel to various job sites, following all road safety regulations and company procedures. The role also involves assisting with routine MEP maintenance, minor repairs, and installations under the guidance of senior technicians, ensuring work is completed to company standards. The individual will complete daily vehicle checks, keep accurate logs of trips and work performed, and maintain a clean, organized vehicle and work area. Regular interaction with clients and colleagues is expected, requiring clear communication, professional conduct, and a strong focus on service quality.<br>Qualifications<br> Candidates should possess strong truck driving skills, including safe operation of commercial vehicles and familiarity with basic truck maintenance. Candidates should possess a valid CDL Class A (or equivalent UAE heavy vehicle license) and a clean driving record. Candidates should possess effective communication skills for coordinating with team members and reporting work progress. Candidates should possess customer service skills to interact professionally with clients and represent the company positively. Candidates should possess foundational mechanical, electrical, and plumbing (MEP) knowledge, with experience in building maintenance preferred. Candidates should possess the ability to read basic work orders and safety instructions and follow standard operating procedures. Candidates should possess a strong focus on safety, reliability, time management, and working in diverse indoor and outdoor environments. Candidates should possess a high school diploma or equivalent; technical certifications in MEP or building maintenance are an advantage.

Job Description<br><br>Ready to take your career to new heights? Dream big, fly higher, join Etihad.  <br><br>As the proud national airline of the UAE, we are committed to empowering the next generation of leaders.<br><br>The Etihad Cadet Technician Programme offers UAE Nationals the opportunity to launch a career with one of the world’s fastest-growing airlines. This hands-on training programme will not only equip you with the technical expertise needed to succeed, but also provide you with the opportunity to collaborate, challenge yourself, and develop as a future leader in our industry.<br><br>What to expect<br><br>We are offering a dynamic and rewarding two-year training and development programme, designed to launch your aviation career and prepare you for progression to become a Licensed Aircraft Technician. The combination of theoretical knowledge and on-the-job training will provide you with practical experience in the field and prepare you to take on responsibilities across all areas of aircraft maintenance, covering a range of aircraft types.<br><br>What you will achieve<br><br>Enroll for a recognised Aviation Maintenance training programme and complet the GCAA-approved aircraft maintenance technician course. Gain practical on the job experience under supervision and gain the necessary 12 months of experience to qualify for the grant of GCAA license and Aircraft maintenance certification Authorisation. Obtain the CAT A license from GCAA Obtain the aircraft maintenance certification authorisation Graduate as licensed Aircraft Technician. Accountabilities<br><br>Complete the GCAA approved training syllabus and Training programme requirements.   Maintain an overall 75% pass rate of all Modules Exams in the stipulated times. Comply with performance requirements set by GCAA, Training Institute and the Company. Complete on-the-job training within assigned timeline post theory qualification. Diligently execute and complete Schedule of Work (logbook) with the tasks assigned. Successfully attend and pass scheduled mandatory training in accordance with Etihad Airways Policy. Participate and successfully pass the Technical staff competency Assessments whenever assigned. Ensure that all work performed at Etihad and completed in accordance with its processes and procedures is done in a safe manner in conformance with the company's procedures, and in compliance with the applicable GCAA regulations. Carry out work in compliance with company, health and safety and airport procedures and regulations. Keep yourself updated with the applicable regulation amendments, company procedures and the latest maintenance best practices. Be responsible of own work after having completed a task that has been performed in accordance with approved data as assigned by Certifying Staff. <br><br> <br><br>Why choose Etihad?<br><br>At Etihad, we’re committed to developing the next generation of aviation leaders. With world-class training, mentorship, and on the job experience, you’ll gain the experience and skills needed to thrive in a dynamic industry.<br><br><br><br>Qualifications<br><br>Are a UAE national with a valid family book Are between 18 and 29 years old Have a high school certificate or equivalent, including Maths/Physics/Science with a 60% overall score Have a strong command of the English language Have completed or been permanently exempted from UAE National Service (males only) Are willing to work shifts, including nights Are flexible about working outdoors<br><br>Additional Information<br><br>Etihad is more than the UAE’s national airline - we’re shaping the future of global aviation through the next generation of Emirati talent. From our home in Abu Dhabi, we are building meaningful career pathways that empower UAE Nationals to grow, lead and make a lasting impact across our airline. As part of our Journey 2030 ambition, we’re investing in the development of future leaders who will help define the next chapter of Etihad and the aviation industry. Join us and take your place in shaping the future.<br><br>To learn more visit www.etihad.com<br><br>Recruitment Fraud Alert<br><br>Beware of fraudulent job offers from individuals or organizations claiming to represent the Etihad group. We will never ask for personal information, bank details, or payment during the recruitment process. Interviews are conducted face-to-face or via video/telephone before any formal offer. If you are asked for money, please treat it as fraudulent.

Job Description<br><br>Ready to take your career to new heights? Dream big, fly higher, join Etihad.  <br><br>As the proud national airline of the UAE, we are committed to empowering the next generation of leaders.<br><br>The Etihad Cadet Technician Programme offers UAE Nationals the opportunity to launch a career with one of the world’s fastest-growing airlines. This hands-on training programme will not only equip you with the technical expertise needed to succeed, but also provide you with the opportunity to collaborate, challenge yourself, and develop as a future leader in our industry.<br><br>What to expect<br><br>We are offering a dynamic and rewarding two-year training and development programme, designed to launch your aviation career and prepare you for progression to become a Licensed Aircraft Technician. The combination of theoretical knowledge and on-the-job training will provide you with practical experience in the field and prepare you to take on responsibilities across all areas of aircraft maintenance, covering a range of aircraft types.<br><br>What you will achieve<br><br>Enroll for a recognised Aviation Maintenance training programme and complet the GCAA-approved aircraft maintenance technician course. Gain practical on the job experience under supervision and gain the necessary 12 months of experience to qualify for the grant of GCAA license and Aircraft maintenance certification Authorisation. Obtain the CAT A license from GCAA Obtain the aircraft maintenance certification authorisation Graduate as licensed Aircraft Technician. Accountabilities<br><br>Complete the GCAA approved training syllabus and Training programme requirements.   Maintain an overall 75% pass rate of all Modules Exams in the stipulated times. Comply with performance requirements set by GCAA, Training Institute and the Company. Complete on-the-job training within assigned timeline post theory qualification. Diligently execute and complete Schedule of Work (logbook) with the tasks assigned. Successfully attend and pass scheduled mandatory training in accordance with Etihad Airways Policy. Participate and successfully pass the Technical staff competency Assessments whenever assigned. Ensure that all work performed at Etihad and completed in accordance with its processes and procedures is done in a safe manner in conformance with the company's procedures, and in compliance with the applicable GCAA regulations. Carry out work in compliance with company, health and safety and airport procedures and regulations. Keep yourself updated with the applicable regulation amendments, company procedures and the latest maintenance best practices. Be responsible of own work after having completed a task that has been performed in accordance with approved data as assigned by Certifying Staff. <br><br> <br><br>Why choose Etihad?<br><br>At Etihad, we’re committed to developing the next generation of aviation leaders. With world-class training, mentorship, and on the job experience, you’ll gain the experience and skills needed to thrive in a dynamic industry.<br><br><br><br>Qualifications<br><br>Are a UAE national with a valid family book Are between 18 and 29 years old Have a high school certificate or equivalent, including Maths/Physics/Science with a 60% overall score Have a strong command of the English language Have completed or been permanently exempted from UAE National Service (males only) Are willing to work shifts, including nights Are flexible about working outdoors<br><br>Additional Information<br><br>Etihad is more than the UAE’s national airline - we’re shaping the future of global aviation through the next generation of Emirati talent. From our home in Abu Dhabi, we are building meaningful career pathways that empower UAE Nationals to grow, lead and make a lasting impact across our airline. As part of our Journey 2030 ambition, we’re investing in the development of future leaders who will help define the next chapter of Etihad and the aviation industry. Join us and take your place in shaping the future.<br><br>To learn more visit www.etihad.com<br><br>Recruitment Fraud Alert<br><br>Beware of fraudulent job offers from individuals or organizations claiming to represent the Etihad group. We will never ask for personal information, bank details, or payment during the recruitment process. Interviews are conducted face-to-face or via video/telephone before any formal offer. If you are asked for money, please treat it as fraudulent.

Job Description<br><br>Ready to take your career to new heights? Dream big, fly higher, join Etihad.  <br><br>As the proud national airline of the UAE, we are committed to empowering the next generation of leaders.<br><br>The Etihad Cadet Technician Programme offers UAE Nationals the opportunity to launch a career with one of the world’s fastest-growing airlines. This hands-on training programme will not only equip you with the technical expertise needed to succeed, but also provide you with the opportunity to collaborate, challenge yourself, and develop as a future leader in our industry.<br><br>What to expect<br><br>We are offering a dynamic and rewarding two-year training and development programme, designed to launch your aviation career and prepare you for progression to become a Licensed Aircraft Technician. The combination of theoretical knowledge and on-the-job training will provide you with practical experience in the field and prepare you to take on responsibilities across all areas of aircraft maintenance, covering a range of aircraft types.<br><br>What you will achieve<br><br>Enroll for a recognised Aviation Maintenance training programme and complet the GCAA-approved aircraft maintenance technician course. Gain practical on the job experience under supervision and gain the necessary 12 months of experience to qualify for the grant of GCAA license and Aircraft maintenance certification Authorisation. Obtain the CAT A license from GCAA Obtain the aircraft maintenance certification authorisation Graduate as licensed Aircraft Technician. Accountabilities<br><br>Complete the GCAA approved training syllabus and Training programme requirements.   Maintain an overall 75% pass rate of all Modules Exams in the stipulated times. Comply with performance requirements set by GCAA, Training Institute and the Company. Complete on-the-job training within assigned timeline post theory qualification. Diligently execute and complete Schedule of Work (logbook) with the tasks assigned. Successfully attend and pass scheduled mandatory training in accordance with Etihad Airways Policy. Participate and successfully pass the Technical staff competency Assessments whenever assigned. Ensure that all work performed at Etihad and completed in accordance with its processes and procedures is done in a safe manner in conformance with the company's procedures, and in compliance with the applicable GCAA regulations. Carry out work in compliance with company, health and safety and airport procedures and regulations. Keep yourself updated with the applicable regulation amendments, company procedures and the latest maintenance best practices. Be responsible of own work after having completed a task that has been performed in accordance with approved data as assigned by Certifying Staff. <br><br> <br><br>Why choose Etihad?<br><br>At Etihad, we’re committed to developing the next generation of aviation leaders. With world-class training, mentorship, and on the job experience, you’ll gain the experience and skills needed to thrive in a dynamic industry.<br><br><br><br>Qualifications<br><br>Are a UAE national with a valid family book Are between 18 and 29 years old Have a high school certificate or equivalent, including Maths/Physics/Science with a 60% overall score Have a strong command of the English language Have completed or been permanently exempted from UAE National Service (males only) Are willing to work shifts, including nights Are flexible about working outdoors<br><br>Additional Information<br><br>Etihad is more than the UAE’s national airline - we’re shaping the future of global aviation through the next generation of Emirati talent. From our home in Abu Dhabi, we are building meaningful career pathways that empower UAE Nationals to grow, lead and make a lasting impact across our airline. As part of our Journey 2030 ambition, we’re investing in the development of future leaders who will help define the next chapter of Etihad and the aviation industry. Join us and take your place in shaping the future.<br><br>To learn more visit www.etihad.com<br><br>Recruitment Fraud Alert<br><br>Beware of fraudulent job offers from individuals or organizations claiming to represent the Etihad group. We will never ask for personal information, bank details, or payment during the recruitment process. Interviews are conducted face-to-face or via video/telephone before any formal offer. If you are asked for money, please treat it as fraudulent.

Automotive Professionals Wanted | Join BA3 Store – UAE ????????BA3 Store is expanding, and we're looking for passionate automotive professionals to join our growing team in the United Arab Emirates. We're hiring experienced candidates in:Chinese Vehicle Specialists Electric Vehicle (EV) Technicians Auto Electricians Automotive Electronics Technicians Car Accessories Installers Paint Protection Film (PPF) Installers Window Tint Installers Car Detailing Specialists What we're looking for:Previous experience in one or more of the above fields Strong technical and problem-solving skills Attention to detail and commitment to high-quality workmanship Ability to work as part of a professional team What we offer:Competitive salary Career growth opportunities Professional working environment Long-term employment with a growing company???? Location: United Arab Emirates???? Apply via Whats App: +971 50 980 9903If you're passionate about the automotive industry and want to grow your career with a dynamic team, we'd love to hear from you. Send us your CV today!#Hiring #Jobs #UAEJobs #Automotive Jobs #Electric Vehicles #EV #Auto Technician #Car Accessories #PPF #Window Tint #Detailing #Chinese Cars #Dubai Jobs #Ras AlKhaimah #Automotive Career

Key Responsibilities:Must have 2-4 years UAE experience in facility management industry. Install, maintain, and repair DX air conditioning units and related HVAC equipment. Carry out preventive and corrective maintenance on split and package DX systems. Diagnose faults in compressors, motors, thermostats, control panels, and refrigerant circuits. Check gas pressure, refrigerant levels, leakage, electrical wiring, and cooling performance. Respond to breakdown calls and complete repairs within the required time. Clean coils, filters, drain lines, fans, and other AC components. Ensure all work is completed according to safety standards and company procedures. Maintain service reports, checklists, and maintenance records. Coordinate with supervisors and other team members to complete assigned tasks. Perform additional multi-technician duties as required, including basic civil maintenance work. Requirements:Minimum 2-4 years of UAE experience in facility management is required. Strong hands-on experience working with DX units is mandatory. Good knowledge of basic civil works such as minor repairs, patching, fixing, and general maintenance. Knowledge of refrigeration, HVAC systems, and electrical troubleshooting. Ability to use gauges, meters, and HVAC testing tools. Good communication and problem-solving skills. Ability to work independently and under pressure. ITI, diploma, or technical certification in HVAC/AC preferred. UAE driving license is an advantage.<br>Interested candidates can apply through operations.hr@bfliving.com with an updated CV

With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>Summary:<br><br>I&C Technician will execute critical maintenance activities during refueling outages at a nuclear power plant, ensuring the highest standards of safety and operational efficiency.<br><br>Key Responsibilities:<br><br>Perform preventive and corrective maintenance, calibration, testing, and modifications of instrumentation and control systems. Conduct troubleshooting and diagnostics on various instruments and components, including transmitters, gauges, solenoids, switches, control valves, and sensors. Execute maintenance activities and periodic tests in compliance with nuclear industry standards and regulatory requirements. Carry out critical component replacements and implement corrective actions to maintain optimal system performance and safety. <br> <br><br><br><br>Qualifications<br><br>Diploma or certificate in I&C or a related field. Minimum of 3 years in I&C maintenance at a nuclear power plant. Knowledge of nuclear power plant safety procedures & related practices.

Job Description<br><br>We are seeking a skilled and detail-oriented Technician to join our team in Ras Al-Khaimah, United Arab Emirates. As a Technician, you will play a crucial role in maintaining and optimizing our technical operations, ensuring the smooth functionality of equipment and systems.<br><br>Operate, maintain, and repair various technical equipment and systems Conduct regular inspections and preventive maintenance to ensure optimal performance Troubleshoot and diagnose technical issues, implementing effective solutions Interpret technical manuals, schematics, and blueprints to guide maintenance and repair activities Collaborate with cross-functional teams to improve operational efficiency Adhere to safety protocols and procedures at all times Document maintenance activities, repairs, and equipment performance Assist in the installation and setup of new equipment and systems Provide technical support and guidance to junior team members Stay updated on industry trends and technological advancements in relevant fields<br><br>Qualifications<br><br>Associate's degree in a technical field or equivalent vocational training3-5 years of experience in a similar technical role Proficiency in operating and maintaining various technical equipment Strong troubleshooting and problem-solving skills Ability to read and interpret technical manuals and schematics Excellent mechanical aptitude and hands-on technical skills Knowledge of safety protocols and procedures in technical environments Strong attention to detail and analytical thinking skills Excellent organizational and time management abilities Effective communication skills, both verbal and written Ability to work independently and as part of a team Willingness to work flexible hours and respond to emergency calls when necessary Basic computer skills for documentation and reporting Physical ability to lift and move equipment<br><br>Additional Information<br><br>What Awaits You...<br><br>The opportunity to join an international and innovative and fast-growing group, committed not only to building new hotels, but to creating a global brand. The ability to challenge the norm and work in an environment that is both creative and rewarding. Be part of a team that is very passionate about creating great hospitality experiences and exploring new locations with every opportunity. A competitive package and plenty of development opportunities.

Job Description<br><br>We are seeking a skilled and detail-oriented Technician to join our team in Ras Al-Khaimah, United Arab Emirates. As a Technician, you will play a crucial role in maintaining and optimizing our technical operations, ensuring the smooth functionality of equipment and systems.<br><br>Operate, maintain, and repair various technical equipment and systems Conduct regular inspections and preventive maintenance to ensure optimal performance Troubleshoot and diagnose technical issues, implementing effective solutions Interpret technical manuals, schematics, and blueprints to guide maintenance and repair activities Collaborate with cross-functional teams to improve operational efficiency Adhere to safety protocols and procedures at all times Document maintenance activities, repairs, and equipment performance Assist in the installation and setup of new equipment and systems Provide technical support and guidance to junior team members Stay updated on industry trends and technological advancements in relevant fields<br><br>Qualifications<br><br>Associate's degree in a technical field or equivalent vocational training3-5 years of experience in a similar technical role Proficiency in operating and maintaining various technical equipment Strong troubleshooting and problem-solving skills Ability to read and interpret technical manuals and schematics Excellent mechanical aptitude and hands-on technical skills Knowledge of safety protocols and procedures in technical environments Strong attention to detail and analytical thinking skills Excellent organizational and time management abilities Effective communication skills, both verbal and written Ability to work independently and as part of a team Willingness to work flexible hours and respond to emergency calls when necessary Basic computer skills for documentation and reporting Physical ability to lift and move equipment<br><br>Additional Information<br><br>What Awaits You...<br><br>The opportunity to join an international and innovative and fast-growing group, committed not only to building new hotels, but to creating a global brand. The ability to challenge the norm and work in an environment that is both creative and rewarding. Be part of a team that is very passionate about creating great hospitality experiences and exploring new locations with every opportunity. A competitive package and plenty of development opportunities.

Job Description<br><br>We are seeking a skilled and detail-oriented Technician to join our team in Ras Al-Khaimah, United Arab Emirates. As a Technician, you will play a crucial role in maintaining and optimizing our technical operations, ensuring the smooth functionality of equipment and systems.<br><br>Operate, maintain, and repair various technical equipment and systems Conduct regular inspections and preventive maintenance to ensure optimal performance Troubleshoot and diagnose technical issues, implementing effective solutions Interpret technical manuals, schematics, and blueprints to guide maintenance and repair activities Collaborate with cross-functional teams to improve operational efficiency Adhere to safety protocols and procedures at all times Document maintenance activities, repairs, and equipment performance Assist in the installation and setup of new equipment and systems Provide technical support and guidance to junior team members Stay updated on industry trends and technological advancements in relevant fields<br><br>Qualifications<br><br>Associate's degree in a technical field or equivalent vocational training3-5 years of experience in a similar technical role Proficiency in operating and maintaining various technical equipment Strong troubleshooting and problem-solving skills Ability to read and interpret technical manuals and schematics Excellent mechanical aptitude and hands-on technical skills Knowledge of safety protocols and procedures in technical environments Strong attention to detail and analytical thinking skills Excellent organizational and time management abilities Effective communication skills, both verbal and written Ability to work independently and as part of a team Willingness to work flexible hours and respond to emergency calls when necessary Basic computer skills for documentation and reporting Physical ability to lift and move equipment<br><br>Additional Information<br><br>What Awaits You...<br><br>The opportunity to join an international and innovative and fast-growing group, committed not only to building new hotels, but to creating a global brand. The ability to challenge the norm and work in an environment that is both creative and rewarding. Be part of a team that is very passionate about creating great hospitality experiences and exploring new locations with every opportunity. A competitive package and plenty of development opportunities.

Company Description Quality Facilities Management (FM) is a leading provider of integrated facilities management services in the region, supporting residential and mixed-use properties for over 25 years. The organization serves a distinguished client base and focuses on maintaining safe, efficient, and reliable building operations. Quality FM combines advanced digital solutions with proven industry practices to optimize asset performance. Continuous improvement and long-term value creation are central to the company’s service approach, offering team members exposure to modern FM techniques and technologies. Role Description The Assistant AC Technician – Fresher role is a full-time, on-site position based in Dubai, United Arab Emirates. The role involves supporting senior AC technicians in routine inspections, installation, and maintenance of air conditioning units and related systems in residential and mixed-use facilities. Daily tasks include assisting in diagnosing basic AC issues, performing filter cleaning, checking refrigerant levels under supervision, and helping with minor repairs and adjustments. The Assistant AC Technician will also help maintain tools and equipment, follow safety procedures, and document work activities as directed. This role offers practical training and development opportunities for individuals starting their career in HVAC and facilities management. Qualifications Ability to assist with AC system troubleshooting and basic diagnosis under supervision. Foundational understanding of electricity and safe handling of electrical components in HVAC settings. Exposure to or interest in preventive maintenance activities for AC and building systems. Basic familiarity with building services such as plumbing and their interaction with HVAC systems. Awareness of environmental and safety norms; EPA-related knowledge or willingness to learn and obtain relevant certifications is an advantage. High school diploma or technical/vocational certificate in HVAC, electrical, or mechanical trades preferred. Ability to follow instructions, work safely, and collaborate respectfully with a diverse team. Physical ability to perform field work, including lifting, climbing, and working in various environmental conditions. Basic English communication skills; additional language skills are a plus. Willingness to learn, adapt to new technologies, and build a long-term career in facilities management.<br>Budget: AED 1300 - AED 1800 Depending on work experience + Benefits

Company Description Quality Facilities Management (FM) is a leading provider of integrated facilities management services in the region, supporting residential and mixed-use properties for over 25 years. The organization serves a distinguished client base and focuses on maintaining safe, efficient, and reliable building operations. Quality FM combines advanced digital solutions with proven industry practices to optimize asset performance. Continuous improvement and long-term value creation are central to the company’s service approach, offering team members exposure to modern FM techniques and technologies. Role Description The Assistant AC Technician – Fresher role is a full-time, on-site position based in Dubai, United Arab Emirates. The role involves supporting senior AC technicians in routine inspections, installation, and maintenance of air conditioning units and related systems in residential and mixed-use facilities. Daily tasks include assisting in diagnosing basic AC issues, performing filter cleaning, checking refrigerant levels under supervision, and helping with minor repairs and adjustments. The Assistant AC Technician will also help maintain tools and equipment, follow safety procedures, and document work activities as directed. This role offers practical training and development opportunities for individuals starting their career in HVAC and facilities management. Qualifications Ability to assist with AC system troubleshooting and basic diagnosis under supervision. Foundational understanding of electricity and safe handling of electrical components in HVAC settings. Exposure to or interest in preventive maintenance activities for AC and building systems. Basic familiarity with building services such as plumbing and their interaction with HVAC systems. Awareness of environmental and safety norms; EPA-related knowledge or willingness to learn and obtain relevant certifications is an advantage. High school diploma or technical/vocational certificate in HVAC, electrical, or mechanical trades preferred. Ability to follow instructions, work safely, and collaborate respectfully with a diverse team. Physical ability to perform field work, including lifting, climbing, and working in various environmental conditions. Basic English communication skills; additional language skills are a plus. Willingness to learn, adapt to new technologies, and build a long-term career in facilities management.<br>Budget: AED 1300 - AED 1800 Depending on work experience + Benefits

About WKC Group<br><br>WKC is a management-owned, international environmental consultancy specialising in science-led environmental studies that support clients’ permitting, financing and wider corporate objectives. Established in 2009, the company has grown from its origins in the Middle East and Africa to deliver projects globally across sectors including energy, mining, transportation, infrastructure and residential development.<br><br>Our work combines scientific expertise, regulatory knowledge and industry insight to help clients navigate environmental challenges and deliver sustainable development outcomes.<br><br>At WKC you’ll work alongside a team of environmental specialists delivering high-impact projects across multiple sectors and regions. Our collaborative partnership model encourages knowledge sharing and innovation across offices, enabling our teams to develop technically robust solutions to environmental challenges.<br><br>Role Summary<br><br>WKC is offering an opportunity for an experienced, marine environmental survey technician hoping to expand their knowledge of on site survey methods and techniques. The role will be based in the UAE with a focus on offering support to WKC’s marine ecological services. Including marine ecology surveys, water and sediment quality surveys, biodiversity surveys, environmental monitoring and data collation and analysis.<br><br>Responsibilities<br><br>Key Responsibilities <br><br>Support WKC ecologists (terrestrial and/or marine) conducting field surveys, including:Benthic habitat identification;MMROWater quality sampling Sediment quality sampling Habitat health assessment (e.g. seagrass and coral) Turtle nesting and hatching surveys Drop down video transects SCUBA transects Data Analysis:Process infauna, plankton and HAB cyst samples. Microscopy including sorting infauna and photography or plankton and HAB cysts Identification, enumeration and statistics. Drive survey vessels (and tow where needed) Act as boat captain and provide navigation Organise maintenance and calibration of survey equipment Keep tracking records up to date (timesheets, vehicle/vessel logs, laboratory records)<br>Skills, Knowledge & Experience<br><br>Essential;<br><br>BSc in relevant subject (e.g. Biology, Zoology, Ecology etc.) Experience (work or research experience) in ecology related field studies;Motor boat licence;Boat licence;PADI or similar SCUBA accreditation.<br><br>Desirable<br><br>Over 5 years UAE experience Experience with microscopy analysis Experience with habitat or species translocation or compensation Environmental monitoring expertise First Aid qualifications Experience specifically on ADNOC projects Bosiet training OGUK medical<br><br>The candidate should work in a way that aligns with WKC's culture, including:<br><br>A strong focus on technical and scientific accuracy Independent work ethic, able to lead in remote field conditions A strong focus on health and safety Interest in analytics of raw baseline data, and interpretation of results<br><br>If you’re excited by the opportunity to contribute to science-led environmental solutions and work on complex projects across diverse sectors and regions, we’d love to hear from you. Please submit your application along with a CV outlining your experience and interest in the role.