Maintenance Technician Jobs in UAE

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Install, maintain, and troubleshoot solar PV systems at residential, commercial, and industrial sites.</p></li><li><p>Perform AC-side electrical works, including DB/SMDB terminations, cable laying, and 3-phase connections.</p></li><li><p>Install and commission solar inverters (Deye, Huawei, Sungrow, or similar brands).</p></li><li><p>Carry out CT installation and configuration for zero-export and net metering systems.</p></li><li><p>Install earthing systems and ensure compliance with electrical safety standards.</p></li><li><p>Read and interpret electrical drawings, single-line diagrams (SLDs), and wiring schematics.</p></li><li><p>Test and verify electrical connections before system energization.</p></li><li><p>Diagnose and resolve electrical faults in solar PV systems.</p></li><li><p>Coordinate with site engineers and project managers to complete installations on schedule.</p></li><li><p>Ensure all work complies with UAE electrical regulations and company safety procedures.</p></li><li><p>Maintain tools, equipment, and materials in good working condition.</p></li><li><p>Prepare daily work reports and communicate project progress to the supervisor.</p></li><li><p>Travel to project sites across the UAE as required.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Minimum 2–5 years of experience in solar PV installations in the UAE.</p></li><li><p>Hands-on experience with AC-side electrical works, including DB/SMDB terminations, 3-phase wiring, cable laying, and earthing.</p></li><li><p>Experience in inverter installation and commissioning (preferably Deye, Huawei, or Sungrow).</p></li><li><p>Knowledge of CT installation, zero-export systems, and net metering.</p></li><li><p>Ability to read electrical drawings and single-line diagrams (SLDs).</p></li><li><p>Familiar with UAE electrical safety standards and installation practices.</p></li><li><p>Valid UAE driving licence is an advantage.</p></li><li><p>Must be currently based in the UAE and available to join immediately or within a short notice period.</p></li><li><p>Physically fit and willing to travel across the UAE for project sites.</p></li><li><p>Good communication skills and ability to work independently as well as in a team.</p></li></ul><p></p></section>

Position Description:Educates patients on oral hygiene and performs dental hygiene services and procedures.<br><br><br>Position Responsibility:Performs dental hygiene services and procedures, including dental prophylaxis, scaling, fluoride, root planning, and in-office whitening treatments. Completes a thorough assessment of the patient's teeth, bone, and periodontal tissues, and documents any abnormalities or suspected conditions. Conducts visual examination and feeling of gums for signs of disease, sores, and other dental health issues. Refers patients to different dentists as per patients' needs (GP Dentist, Orthodontist, Periodontist, Implantologist, and Oral Surgeon, etc.). Complies with safety procedures, rules, and regulations in order to maintain a clean and safe working environment Promotes preventative dental care to improve patient oral health care. Participates in activities to promote healthy oral hygiene in schools/ corporate events and increase patient footfall (business development activities). Educates patients on good oral hygiene techniques (how to brush your teeth, how to use dental floss and interproximal brushes, the type of food that can stain the teeth, etc.) Provides high-quality, comprehensive dental care and maintains a dental hygiene program for patients Carries out Perio charting and sub-gingival scaling for patients with Periodontal Disease Records dental decay and disease for diagnosis and treatment by dentists Maintains dental equipment and x-ray machine Maintains patient confidentiali<br>ty<br>Position Qualification:Bachelor's Degree/Diploma in Dental Hygi<br>ene<br>Professional Experience:Minimum of two (2) years of experience post-qualification in a related field Excellent English verbal and written communication skills Ability to use computers for a variety of tasks Knowledge of dental terminology, equipment, and practices Knowledge of computer task Basic Life Support (BLS) certification Advanced Cardiac Life Support (ACLS) certification preferred Private hospital experience prefe<br>rred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>•&nbsp;&nbsp;&nbsp;&nbsp;To develop the skills, knowledge and competencies required to enable the ATSEP NDP (Trainee) to progress to ATSEP (Engineer) allowing them to maintain the availability and integrity of all ATE or ATM systems or equipment, dependent on their allocated working position within CNS.•&nbsp;&nbsp;&nbsp;&nbsp;Note:&nbsp;&nbsp;&nbsp;&nbsp;It is essential that the ATSEP NDP successfully completes training phases 1 and 2 with minimum delay in order to progress to ATSEP (Engineer)&nbsp;</p><br> <p>Knowledge &amp; Experience:&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Previous experience is not expected, however, the individual should have an interest in aviation and in particular Communications, Navigation and Surveillance radar systems•&nbsp;&nbsp;&nbsp;&nbsp;Training will be provided in 4 phases to meet the ICAO doc 9868 - Training and 10057 - Manual on Air Traffic Electronics Safety Personnel Competency-based Training and Assessment•&nbsp;&nbsp;&nbsp;&nbsp;Some basic technical knowledge of Communications, Navigation, Radar, ATM and other Airport Systems would be advantageous</p><br><p>Skills:&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Hold a valid UAE driving licence•&nbsp;&nbsp;&nbsp;&nbsp;Resourceful team player who excels at building trusting relationships with colleagues.&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Good attention to detail•&nbsp;&nbsp;&nbsp;&nbsp;Good communication and organizational skills•&nbsp;&nbsp;&nbsp;&nbsp;The ability to read and interpret technical drawings and schematic diagrams•&nbsp;&nbsp;&nbsp;&nbsp;Computer literacy with MS office package</p><br><p><span><span>Note: you will be required to attach the following mandatory documents to complete your application:</span></span><b><strong>- CV</strong></b></p><br><p><b><strong>-Bachelors degree</strong></b><b><strong>- Passport Copy</strong></b><b><strong>- Certificate copy of&nbsp;IELTS band 5.5 or above, EmSAT-English score of 1250 or above</strong></b><b><strong>-Military exception letter (Applicable for male candidates only</strong></b>&nbsp;</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> United Arab Emirates </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</strong></p><br><p><em>We have an outstanding record in completing major Energy, Marine, Infrastructure and Defense &amp; Security projects around the globe and we pride ourselves on delivering over the years the kind of reliability and trust that the client has the right to expect from a major EPC contractor.</em></p><br><br>Job Description<br><p>We are constantly growing and are currently looking for Three (3) <strong>Technical Office Engineers (Civil</strong><strong>)</strong>&nbsp;to join a top qualified and knowledgeable team of Engineers</p><br><p>Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.</p><br><p>Join our worldwide journey. Build on something that matters!</p><br><p><strong>What you will need to do:</strong></p><br><ul><li>Prepare, review, and submit <strong>shop drawings, as-built drawings, and technical submittals</strong> in line with project requirements.</li><li>Perform <strong>quantity take-off (QTO)</strong> and assist in cost estimation and variation orders.</li><li>Coordinate with site engineers, project managers, consultants, and clients to resolve technical issues.</li><li>Ensure all civil works comply with <strong>ADNOC standards, project specifications, and IFC drawings</strong>.</li><li>Prepare method statements, material submittals, and technical documentation.</li><li>Monitor project progress and support planning team with technical inputs.</li><li>Maintain proper documentation control and ensure all revisions are updated.</li><li>Assist in preparation of <strong>progress reports, RFIs, and technical correspondences</strong>.</li><li>Support procurement team with technical evaluation of materials and subcontractor submissions.</li><li>Ensure timely resolution of design clashes and site coordination issues.</li></ul><p><strong>What is in it for you:&nbsp;</strong></p><br><p>Competitive salary and benefits are part of the offering, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create&nbsp;mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come.&nbsp;At Archirodon, you will find a proud,&nbsp;productive and human-centric culture, caring for and building on our people and their development!</p><br><br>Qualifications<br><ul><li>Bachelor’s Degree in <strong>Civil Engineering</strong> or equivalent.</li><li>Minimum <strong>5+ years of experience</strong> in EPC Oil &amp; Gas projects in the UAE.</li><li>Strong <strong>ADNOC project experience is mandatory</strong>.</li><li>Excellent knowledge of <strong>AutoCAD, Excel, and engineering documentation systems</strong>.</li><li>Experience in <strong>shop drawings, QTO, and technical office coordination</strong>.</li><li>Strong understanding of <strong>civil construction methods (earthworks, concrete, infrastructure works, etc.)</strong>.</li><li>Ability to work under pressure and meet strict deadlines.</li><li>Good communication and coordination skills.</li></ul><p><strong>What it is nice to have:</strong></p><br><ul><li>Previous working experience in several projects at same time</li></ul><p><strong>You are someone who:</strong></p><br><ul><li>Organized, committed and hard worker</li><li>Strong interpersonal skills and a team player with high attention to details</li><li>An analytical thinker</li><li>A result driven person combined with problem solving techniques</li><li>Report writing and communication skills&nbsp;</li></ul><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring&nbsp;our </em><em>open vacancies</em><em> and our </em><em>LinkedIn</em><em>&nbsp;page!&nbsp; Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Technical HSE– Offshore Water Injection Project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Specialist</span><span> Technical HSE</span></u></b><b><u><span>– Offshore Water Injection Project</span></u></b></p><br><br><p>KBR Abu Dhabi PMC Team is currently looking to fill a position of<b><u> : Specialist Technical HSE </u></b>for an <b>Offshore Project </b>to be based in UAE ( Abu Dhabi) as soon as the administrative processes are completed, will then relocate to <b>Spain Office</b> and then return to Abu Dhabi<b>&nbsp;. </b></p><br><br><p><b>Job Purpose</b></p><br><br><p>The Specialist Technical HSE is responsible for providing technical Health, Safety, Environment, and Process Safety expertise throughout the lifecycle of the Offshore Water Injection Project. The role focuses on identifying and mitigating risks associated with engineering design, construction, commissioning, startup, and operations while ensuring compliance with ADNOC requirements, international standards, and project HSE objectives.</p><br><br><p>The position acts as a key technical advisor for process safety, risk management, HSE engineering studies, and regulatory compliance, supporting the safe execution of brownfield modifications and offshore installation activities.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Technical HSE &amp; Process Safety</b></p><br><br><ul><li>Provide technical HSE support during FEED, Detailed Engineering, Construction, and Commissioning phases.</li><li>Lead and facilitate HAZID, HAZOP, Bow-Tie Analysis, SIMOPS, ENVID, SIL, and Risk Assessment workshops.</li><li>Review and verify process safety design requirements and safety-critical elements.</li><li>Support implementation of Process Safety Management (PSM) requirements.</li><li>Ensure hazards are identified, assessed, and effectively mitigated throughout the project lifecycle.</li><li>Review Loss Prevention philosophies and Process Safety deliverables.</li></ul><p><b>Risk Management</b></p><br><br><ul><li>Develop and maintain project risk registers related to HSE and process safety.</li><li>Conduct qualitative and quantitative risk assessments.</li><li>Support ALARP demonstrations and risk reduction strategies.</li><li>Evaluate risks associated with brownfield modifications, tie-ins, shutdowns, and offshore construction activities.</li><li>Assist in developing mitigation measures for identified hazards.</li></ul><p><b>Safety Studies &amp; Engineering Reviews</b></p><br><br><ul><li>Prepare and review:<ul><li>Fire and Gas Detection Philosophy</li><li>Fire Protection Philosophy</li><li>Emergency Shutdown (ESD) Philosophy</li><li>Escape, Evacuation and Rescue Analysis (EERA)</li><li>Fire Risk Assessments (FRA)</li><li>Quantitative Risk Assessments (QRA)</li><li>Safety Critical Element (SCE) Registers</li></ul></li><li>Ensure HSE recommendations are implemented and closed appropriately.</li></ul><p><b>Brownfield &amp; Offshore Safety</b></p><br><br><ul><li>Assess safety implications of modifications to existing offshore facilities.</li><li>Participate in SIMOPS planning and risk assessments.</li><li>Review shutdown and tie-in execution strategies from an HSE perspective.</li><li>Conduct offshore site assessments and safety audits.</li><li>Support safe integration of new water injection facilities into existing operating assets.</li></ul><p><b>Regulatory &amp; Compliance Management</b></p><br><br><ul><li>Ensure compliance with ADNOC, UAE regulatory requirements, and international HSE standards.</li><li>Support preparation of project HSE cases and safety documentation.</li><li>Participate in internal and external HSE audits.</li><li>Ensure alignment with ISO 45001, ISO 14001, and company HSE management systems.</li><li>Track closure of audit findings and safety actions.</li></ul><p><b>Contractor HSE Management</b></p><br><br><ul><li>Evaluate contractor HSE plans, procedures, and risk assessments.</li><li>Review Method Statements, Job Safety Analyses (JSA), and Task Risk Assessments (TRA).</li><li>Monitor contractor compliance with project and client HSE requirements.</li><li>Support contractor safety performance reviews and improvement initiatives.</li></ul><p><b>Incident Investigation &amp; Learning</b></p><br><br><ul><li>Participate in incident investigations and root cause analyses.</li><li>Identify lessons learned and recommend preventive measures.</li><li>Support implementation and verification of corrective actions.</li><li>Promote continuous improvement in project safety performance.</li></ul><p><b>Construction &amp; Commissioning Support</b></p><br><br><ul><li>Provide technical safety guidance during offshore installation and commissioning activities.</li><li>Review commissioning procedures and startup safety requirements.</li><li>Support pre-startup safety reviews (PSSR).</li><li>Verify compliance with safety requirements before system energization and operation.</li></ul><br><p><b>Required Qualifications</b></p><br><br><ul><li>Bachelor's Degree in Engineering, Occupational Health &amp; Safety, Chemical Engineering, Environmental Engineering, or related discipline.</li><li>NEBOSH International Diploma or equivalent professional HSE qualification.</li><li>Process Safety certification is highly desirable.</li><li>Lead Auditor Certification (ISO 45001 and/or ISO 14001) preferred.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>15-18 years of HSE experience in the Oil &amp; Gas industry.</li><li>Minimum 5 years in Technical HSE, Process Safety, or Loss Prevention roles.</li><li>Strong experience in offshore EPC and brownfield modification projects.</li><li>Extensive involvement in HAZOP, QRA, SIL, EERA, and Fire &amp; Gas studies.</li><li>Experience supporting offshore water injection, production, and utility systems.</li><li>ADNOC Offshore and Middle East project experience highly preferred.</li></ul><br><p><b>Technical Competencies</b></p><br><br><p><b>Process Safety &amp; Risk</b></p><br><br><ul><li>Process Safety Management (PSM)</li><li>HAZID / HAZOP</li><li>SIL Assessment</li><li>Bow-Tie Analysis</li><li>LOPA</li><li>QRA</li><li>ALARP Demonstration</li><li>Safety Critical Elements (SCE)</li></ul><p><b>Loss Prevention</b></p><br><br><ul><li>Fire &amp; Gas Detection Systems</li><li>Fire Protection Systems</li><li>Explosion Risk Assessment</li><li>Emergency Shutdown Systems</li><li>Emergency Response Planning</li><li>Escape, Evacuation &amp; Rescue Analysis (EERA)</li></ul><p><b>HSE Management</b></p><br><br><ul><li>Incident Investigation</li><li>Root Cause Analysis</li><li>Contractor HSE Management</li><li>SIMOPS Management</li><li>Management of Change (MOC)</li><li>Audit &amp; Compliance Programs</li></ul><br><p><b>Software Skills</b></p><br><br><ul><li>PHAST</li><li>SAFETI</li><li>PHA-Pro</li><li>BowTieXP</li><li>MS Office Suite</li><li>Power BI (Preferred)</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Our Nursing Vision: At NMC Healthcare, we are committed to providing clinical excellence through safe, compassionate, and individualized care to every patient, every time.</span></p><br><p><span>Our Nursing Mission: To exemplify clinical excellence, every NMC nurse will seek to:</span></p><br><ul><li><p><span>Do the right thing</span></p><br></li><li><p><span>Be the patient’s advocate</span></p><br></li><li><p><span>Be open and transparent</span></p><br></li><li><p><span>Deliver safe, compassionate care</span></p><br></li><li><p><span>Recognize the uniqueness of each patient</span></p><br></li><li><p><span>Contribute to an outstanding patient’s experience</span></p><br></li><li><p><span>Engage with and contribute to, a learning culture</span></p><br></li><li><p><span>Lead and influence changes in healthcare</span></p><br></li></ul><p><span>Our Nursing Values: We will achieve this through our core values:</span></p><br><ul><li><p><span>Safety</span></p><br></li><li><p><span>Excellence</span></p><br></li><li><p><span>Ethics</span></p><br></li><li><p><span>Trust</span></p><br></li><li><p><span>Collaboration</span></p><br></li></ul><p><span><span>The post holder will work collaboratively with other team members, uphold and live the NMC Nursing Strategy in order to provide safe and outstanding care to their patient, to the patient's bystanders all the time, every time.</span></span></p><br><br>Responsibilities:<br><ul><li><p><span>Develop and maintain a learning culture amongst nurses, particularly in the specialist field in which they work.</span></p><br></li><li><p><span>Be an expert registered nurse</span><span>s</span><span> with advanced education, training or certification in their specialized area of practice. Specialty practice may be defined by population, clinical setting a disease/medical subspecialty and type of care or type of problem.</span></p><br></li><li><p><span>Be a role model and always seek to improve the safety and quality of care delivered to patients in the specialist field.</span></p><br></li><li><p><span>Be a member of the interprofessional team as a subject matter expert in his/ her field of specialization.</span></p><br></li><li><p><span>Support and lead audit and data collection in their area of specialization for KPIs and benchmarking.</span></p><br></li><li><p><span>Support the nurse educator with training programs, training needs analysis within the specialised field.</span></p><br></li><li><p><span>Support patient care, educating patients and the public about various health conditions, and providing advice and emotional support to patients and their family members.</span></p><br></li><li><p><span>Assess and identify patients' needs and implement and monitor the patient's medical plan and treatment.</span></p><br></li><li><p><span>Perform systematic patient assessment, re-assessment and collect pertinent data about the patient’s health or situation.</span></p><br></li><li><p><span>Understand and analyze the assessment information and data.</span></p><br></li><li><p><span>Determine actual and potential nursing diagnoses, problems, and issues.</span></p><br></li><li><p><span>Define the predicted and expected outcomes of the patient’s planned care.</span></p><br></li><li><p><span>Create and evaluate patient care plans with the interprofessional team, in collaboration with the patient and patient's bystanders.</span></p><br></li><li><p><span>Maintain and update technical and clinical skills related to nursing practice.</span></p><br></li><li><p><span>Employ strategies to promote patients’ health and a safe environment.</span></p><br></li><li><p><span>Understand different diagnostic tests and laboratory examinations.</span></p><br></li><li><p><span>Perform essential life support as per regulatory requirements and scope such as but not limited to Basic Life Support, Pediatric Advanced Life Support, Advanced Cardiac Life Support, Neonatal Resuscitation etc.</span></p><br></li><li><p><span>Assist in medical procedures invasive or non-invasive as needed.</span></p><br></li><li><p><span>Support the process of safe patient`s admission, transfer and discharge.</span></p><br></li><li><p><span>Responsible for the competent physical documented assessment (using all sources to hand including observation and communication) and subsequent preparation of appropriate treatment for a patient's skin care needs based on good clinical knowledge, experience, and consultation with a Dermatologist/Physician</span></p><br></li><li><p><span>Responsible for the trained and competent use of Laser machines for the purpose of hair removal as recognized by the certification of the Dermatologists in NMC.</span></p><br></li><li><p><span>Provides up-to-date and sanctioned knowledge and empathic support for clients who wish to, or those who need to undergo hair removal treatment (including permanent, hair reduction, laser skin resurfacing and vascular lesions with the Dermatologist). This may include laser tattoo removal</span></p><br></li><li><p><span>The treatment and care of skin pre and post procedure and surgery including the identification of wounds, types and stages of healing and the necessity of informing and working with medical practitioners should the case indicate</span></p><br></li><li><p><span>The treatment and care of facial skin to maintain and improve its appearance, including understanding about the sun and its effect on the skin.</span></p><br></li><li><p><span>The provision, based on competence, of pain relief and stress reduction and anxiety reduction techniques prior to procedures provided by a dermatologist.&nbsp;</span></p><br></li><li><p><span>Ensure timely and accurate documentation of all procedures including detailed informed consents, and patient education regarding equipment and skin care protocols.</span></p><br></li></ul><br>Qualifications:<br><ol><li>Valid DOH/DHA/MOH/SHA License.</li><li>Must have 2-3 years' experience within the specialist field.</li><li>Licensed Healthcare Professional by either of the Authorities as a Registered Nurse, Assistant Nurse or Beauty Therapist.</li><li><p>Academic qualification as Registered Nurse, Assistant Nurse, or Beauty Therapist and Hair reduction certification from one of the following bodies if attained from outside UAE:</p><br><p>a. The Society for Clinical and Medical Hair Removal (SCHMR).</p><br><p>b. National Council on Laser Certification (NCLC) With evidence of ten (10) hands-on training cases.</p><br></li><li>Have completed the relevant competencies within the specialist field.</li><li>Be able to communicate clearly and effectively in English (spoken and written)</li><li>Preference to candidate fluent in communicating in Arabic.</li><li><p>Valid Basic Life Support (BLS) from American Heart Association.</p><br></li></ol> </div>

Company Description Al Yamuna Densons Industries has over 50 years of experience in the electrical infrastructure sector, serving a wide range of clients across the MENA region. The company operates a UAE-based manufacturing plant that supports efficient production and distribution of electrical products, particularly to GCC markets. By establishing a strong presence in the Middle East, Al Yamuna Densons is positioned close to its customers to provide responsive, end-to-end service. The organization is focused on reliability, quality, and long-term partnerships with utilities and infrastructure providers, offering opportunities for skilled professionals to contribute to regional growth.<br>The candidate should possess the following qualifications and experience:Technical Requirements Hands-on experience in the installation of Heat Shrink, Cold Shrink, and Pre-Moulded cable joints and terminations. Experience working with both XLPE and PILC cable systems. Ability to install and commission straight joints, outdoor/indoor terminations, and separable connectors for medium-voltage cable systems. Knowledge of cable preparation, connector crimping, earthing, stress control, insulation rebuilding, sealing, and final installation practices. Project Experience Experience in site installation, commissioning, and supervision of cable accessory projects. Ability to coordinate with utilities, consultants, contractors, and end users during project execution. Familiarity with installation practices and utility requirements for medium-voltage distribution networks. Testing and Commissioning Knowledge The candidate should have practical knowledge of field testing and commissioning activities, including:Insulation Resistance (IR) Test AC High Voltage (VLF/AC Withstand) Test Partial Discharge (PD) Test Sheath Integrity Test Continuity and Earth Resistance Test Phase Identification and Cable Testing Commissioning procedures before cable energization Preparation of testing records and commissioning reports Additional Requirements Ability to identify and troubleshoot installation and commissioning issues in cable accessories. Good communication and reporting skills. The selected candidate will be responsible for supporting installation, commissioning, field troubleshooting, customer demonstrations, and technical assistance related to our medium-voltage cable accessories. Availability• Immediate availability.

???? Position: Technical Support / Pre-Installation Coordinator???? Location: Dubai, UAE☀️ Industry: Renewable Energy / Solar<br>We’re looking for a technically minded and detail-oriented professional to support the pre-installation process for a growing UK solar energy company. This position will be based in Dubai, UAE.<br>The role will focus on reviewing sales and survey information before installation, identifying potential issues early, and helping the team find practical solutions.<br>Key Responsibilities:• Review roof layouts, measurements, plans, photographs, and survey information• Check proposed solar panel locations and available roof space• Review cable routes, equipment positioning, and site access requirements• Identify potential technical or installation issues before work begins• Recommend practical solutions to ensure smooth installations• Coordinate closely with sales, operations, and installation teams• Speak directly with UK-based clients and customers over the phone to clarify requirements and resolve potential installation issues<br>What We’re Looking For:• Strong technical and problem-solving mindset• Comfortable reviewing plans, layouts, measurements, and photographs• Confident and professional English communication skills• Experience providing technical support and dealing directly with customers over the phone is a plus, with confidence communicating with UK-based clients and customers.• Excellent attention to detail• Experience in technical support, construction, engineering coordination, surveying, installations, or similar roles is an advantage• Solar experience is NOT required — training can be provided• Immediate joiners are highly preferred

<p><br></p><p>We have an urgent requirement of <strong>Manager -Planning/ Core Team Lead</strong> in one of the leading Engineering/ Construction company UAE Habshan. We have gone through your profile and it looks matching with our requirement.</p><p><br></p><p><strong><u>Please find a brief about the job as follows:</u></strong></p><p>Position: Manager Planning/ Core Team Lead</p><p>Location: Habshan- UAE</p><p>Leave Cycle: 1 Months/Year</p><p>Position: Long term</p><p><br></p><ul><li><p>Minimum <strong>15 years</strong> of experience, including at least <strong>1–2 years in a similar leadership role</strong>.</p></li><li><p><strong>Mandatory:</strong> All experience must be in the <strong>Oil & Gas Shutdown/Turnaround (TA) industry</strong>, with proven experience leading shutdown planning and execution teams.</p></li><li><p>To provide leadership and direction to the Planning Team in providing Planning and Scheduling functions across all disciplines.</p></li><li><p>All works to be planned in a cost-effective manner in line compliance with the clients HSE & Quality Policies in a safe manner to standards, codes, and practices</p></li><li><p>Prepare, review & submit to Client Turnaround Major Milestones (Total and summary).</p></li><li><p>Compile, Review & update Level-IV plans from the area-wise plans prepared by Area Planning Engineers and keep track monitor of the overall master schedule</p></li><li><p>Compile, Review & update Level-IV Schedule prepared by Scheduling Engineer and keep track of monitor overall master schedule</p></li><li><p>Identify Subcontractor & specialist subcontractor requirement for Turnaround. Coordinate, meeting & finalization of a subcontractor for Turnaround</p></li><li><p>Generate and analyze standard reports related to progress, efficiency, and cost on a monthly basis and to raise flag alert to the client in case of variation from standard benchmarks/budget</p></li><li><p>Prepare and submit a recovery plan for any delayed critical activity for client review and approval</p></li><li><p>Issues Monthly Reports and produces a presentation for the client on a monthly basis for various turnaround related requirements</p></li><li><p>Develop, Maintain and Update Monthly Look Ahead and provide management with a clear and detailed picture for the next 3 month to 6 months</p></li><li><p>Coordinates, update & follow up with all stakeholders directly involved in the clients' Turnaround for pending action as per monthly minutes of meeting</p></li><li><p>Identify the long lead items needs to be ordered & interact with client for necessary action</p></li><li><p>Follow-up with respective planning engineer of the core team to complete all the material reservation as per Turnaround major milestone</p></li><li><p>Follow-up with core team material Engineer for material delivery status & inform the client if there is an issue with for any potential delivery delay.</p></li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>As your profile is in a good match with our requirement and if you would like to explore the new challenging opportunity, kindly share your updated CV along with the following details:</p><br/><ul><li>Updated CV</li><li>Current Salary</li><li>Expected Salary</li><li>Current Location</li><li>Minimum Notice Period</li><li>Total planning exp. in Shutdown projects</li><li>Total no of shutdowns/turnaround handled</li></ul><br/><br/><p><strong>Thanks & Regards:</strong></p><p>Sandeep Kumar</p><p>Head Operations</p><p>Universal Talent Hub</p><p>Connecting Talent With Opportunity</p>

Job Description<br><br> Responsibilities: 1. Assist technical officer in finalizing PAF. 2. Review FCR and request any missing information from concerned. 3. Create BOM & Route for FCR and sign it. 4. Study & compare the sample request to FCR (if available). 5. Check the availability of PE for sample orders if applicable, and request it whenever needed. 6. Issue Cliché / Cylinder request to artwork unit for sample orders if needed, and follow-up. 7. Create BOM & Route & test requirements for sample and get technical unit head approval. 8. Update sample backlog. 9. Pass the sample specs to planning for execution. 10. Follow up with planning, production & QA on the sample execution. 11. Validate final sample if conforming to customer specs. 12. Create the TDS & Sample dispatch form and notify planning, WIP Warehouse & logistics unit about sample readiness. 13. Compare new sales orders to FCR & sample orders executed earlier and clarify any discrepancies. 14. Create new product’s BOM, Routes & properties for new commercial orders. 15. Revise existing BOM & Route & test requirements if needed. 16. Perform TDS comparison upon request from purchasing department and test physical properties if A4 sample is available. 17. Plan for testing of new RM run-ability with technical unit head. 18. Create required specs of RM for testing reference. 19. Update RM evaluation log and development samples index. 20. Follow up with planning, production & QA on RM trial execution. 21. Validate final RM trial result if conforming to Compact standards. 22. Send sample resulted from RM trial to customer for final validation if needed. 23. Issue RM / supplier final disposition report. 24. Reflect the final outcome on the RM evaluation log and development samples index. 25. Keep machine limitations files updated. 26. Makes sure that Compact products conform to statutory, regulatory & Food Safety requirements by performing regular tests on the products at external labs & updating food safety team about the results. 27. Issues Certificate of Conformity when required. Safety Responsibilities:- 1- Enforce company regulations and policies regarding Health, and Safety. 2- Read and understand the Health and safety manual. 3- Carry out risk assessment in the section of responsibility with the participation and the cooperation of subordinates. 4- Read and understand the Emergency Response Procedures 5- Pass to junior colleagues, information and instructions received from the weekly health and Safety meetings he attends 6- Forwards questions received from subordinates, to the HSE meetings for an answer if he cannot answer 7- Ensure HSE procedures are adhered to in his area of work 8- Ensure all subordinates are trained and fully understand all safe working practices within their area of work. 9- Establish required training for all personnel, ensuring this is completed, understood, and effective 10- Remain aware of and ensure that the Health and safety practices, local rules and regulations are being implemented in his section. 11- Ensure all checklists/audits within his section are understood and effectively completed 12- Set the standards for the rest of the section where safety is concerned 13- Ensure all near misses, unsafe acts, unsafe conditions are reported 14- Ensure any unsafe acts he sees are immediately stopped 15- Ensure any unsafe conditions are locked out until they are repaired 16- Ensure any new hazards are reported immediately 17- Take part in cross auditing program. 18- Ensure daily “ safety talk” meetings take place in his area of responsibility 19- Attend all safety meetings.

With a legacy of over 40 years, GCG Engineering Services excels in delivering cutting-edge solutions and aftermarket support for precision instruments, metering systems, flow controls, heat exchangers, automation, plus electrical & instrumentation bulk trading. Renowned for its reliability and expertise, GCG Engineering Services supports the Oil & Gas, Water, Power, and Industrial sectors, enhancing operational efficiency and delivering unmatched value across the GCC region.<br><br>Job Description<br><br>Fabricate HVAC ductwork, fittings, and accessories as per approved shop drawings and fabrication details. Read and interpret HVAC fabrication drawings, duct layouts, and cutting schedules. Measure, mark, cut, bend, fold, notch, and assemble GI, stainless steel, and aluminum duct sheets using appropriate fabrication tools and machinery. Install duct stiffeners, flanges, cleats, corners, and reinforcement as specified in fabrication drawings. Operate fabrication equipment such as guillotine shears, press brakes, Pittsburgh lock machines, lock formers, notchers, rollers, grooving machines, and spot welding machines safely and efficiently. Ensure fabricated duct sections comply with approved dimensions, tolerances, and quality requirements. Inspect fabricated components for defects before dispatch to the installation team. Minimize material wastage by following approved cutting plans and fabrication procedures. Maintain fabrication tools, machines, and work areas in good operating condition. Coordinate with the HVAC Foreman regarding fabrication priorities and production schedules. Assist in loading, unloading, and proper storage of fabricated duct sections. Comply with company HSE policies and wear appropriate PPE during fabrication activities.<br><br>Qualifications<br><br>ITI / Trade Certificate in Sheet Metal, Mechanical, HVAC, or an equivalent technical trade. Minimum 3–5 years of experience as a Duct Fabricator in HVAC projects. Experience in Oil & Gas, Petrochemical, Refinery, LNG, or Industrial EPC projects is preferred. Experience in fabrication of GI, stainless steel, and aluminum ductwork is highly desirable.<br><br>Additional Information<br><br>Must be able to work in outdoor environments under varying weather conditions. Will be required to work on high platforms or confined spaces, adhering strictly to safety standards. May be required to work overtime or extended shifts based on project deadlines.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>The following are specific responsibilities and contributions critical to the successful performance of the position:<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment (e.g., boilers, chillers, and air handling units/controls), including charging refrigeration systems, replacing air filters, and cleaning coils.<br>Test and record boiler, condenser, and open/closed loop systems water quality and take any necessary corrective action such as adding chemicals to prevent corrosion and harmful deposits&nbsp;<br>Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners<br>Carry out minor Plumbing &amp; Mechanical works for HVAC systems &amp; Equipment, as required<br>Monitor and inspect HVAC Plant/Equipment, BMS computer terminals &amp; outstations, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions, and to ensure that equipment is operating efficiently and safely<br>Maintain engineering area is safe, kept clean and in an orderly manner. Keep close coordination with other engineering staff for smooth operation.&nbsp;<br>Participate in departmental meetings and training etc.&nbsp;<br>Assist in energy conservation programme, follow up with banquet staff to save electricity and air conditioning when meetings are over.&nbsp;<br>Comply with hotel and corporate LSOP’s and SOP’s.&nbsp;<br>To attend all safety and fire training and adhere to safety instructions at work to prevent any accidents.&nbsp;<br>Document all work performed and any spares used.<br>Serve as an active member of hotel emergency response team.&nbsp;<br>Carry out any requests asked of you by your immediate supervisor.<br>Take active role in the TQM process.&nbsp;<br>To ensure that you maintain a high level of hospitality and guest concern. Practice at all times “Empowerment” and do whatever it takes to satisfy the guest.&nbsp;<br>Accident prevention and safety to be aware of all existing departmental job safety analysis and to strive to work in an accident free manner and to create a safe working environment for himself and for others.&nbsp;<br>Maintain high standard of GSS and Brand standard for guest rooms and related areas.&nbsp;<br>To carry out other job assignments given by DOE or designate, as business demands.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Role: Member of Technical Staff - Robotics Lab (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: $400K - $1500K/yr<br>Role Overview:We are hiring for one of our clients, seeking a Member of Technical Staff (Robotics Lab) to work on a full-time basis. The role involves designing, developing, and deploying robotics systems with a focus on scalable autonomy and real-time control. Candidates will collaborate with cross-functional teams to integrate hardware and software solutions for next-generation robotic platforms.<br>Key Responsibilities:• Design and implement control algorithms for robotic systems, including kinematics, dynamics, and path planning.• Develop and maintain software for robot perception, localization, and mapping using sensor fusion techniques.• Collaborate with hardware engineers to integrate sensors, actuators, and embedded systems into functional robotic prototypes.• Optimize robotic performance for efficiency, reliability, and safety in dynamic environments.• Document technical specifications, test results, and deployment procedures for internal and external stakeholders.<br>Required Skills & Qualifications:• Proficiency in robotics frameworks such as ROS, ROS 2, or similar platforms.• Strong programming skills in C++, Python, or other relevant languages for robotics applications.• Experience with real-time control systems, embedded software, and hardware-in-the-loop testing.• Knowledge of computer vision, SLAM (Simultaneous Localization and Mapping), or sensor fusion techniques.• Familiarity with simulation tools like Gazebo, Coppelia Sim, or NVIDIA Isaac Sim is required.• Experience with robotic operating systems, middleware, and communication protocols (e.g., CAN, Ethernet, UDP).• Ability to design and analyze algorithms for motion planning, obstacle avoidance, and task execution.• Experience with version control systems such as Git and collaborative software development workflows.• Understanding of machine learning techniques for robotics, including reinforcement learning or imitation learning.• Strong problem-solving skills with the ability to troubleshoot complex robotic systems.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Information Services industry, contributing to the development of autonomous robotic systems for industrial and commercial applications. The position involves high-impact work with cutting-edge technology and the chance to shape the future of robotics in a fast-evolving field.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Member of Technical Staff - Robotics Lab (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: $400K - $1500K/yr<br>Role Overview:We are hiring for one of our clients, seeking a Member of Technical Staff (Robotics Lab) to work on a full-time basis. The role involves designing, developing, and deploying robotics systems with a focus on scalable autonomy and real-time control. Candidates will collaborate with cross-functional teams to integrate hardware and software solutions for next-generation robotic platforms.<br>Key Responsibilities:• Design and implement control algorithms for robotic systems, including kinematics, dynamics, and path planning.• Develop and maintain software for robot perception, localization, and mapping using sensor fusion techniques.• Collaborate with hardware engineers to integrate sensors, actuators, and embedded systems into functional robotic prototypes.• Optimize robotic performance for efficiency, reliability, and safety in dynamic environments.• Document technical specifications, test results, and deployment procedures for internal and external stakeholders.<br>Required Skills & Qualifications:• Proficiency in robotics frameworks such as ROS, ROS 2, or similar platforms.• Strong programming skills in C++, Python, or other relevant languages for robotics applications.• Experience with real-time control systems, embedded software, and hardware-in-the-loop testing.• Knowledge of computer vision, SLAM (Simultaneous Localization and Mapping), or sensor fusion techniques.• Familiarity with simulation tools like Gazebo, Coppelia Sim, or NVIDIA Isaac Sim is required.• Experience with robotic operating systems, middleware, and communication protocols (e.g., CAN, Ethernet, UDP).• Ability to design and analyze algorithms for motion planning, obstacle avoidance, and task execution.• Experience with version control systems such as Git and collaborative software development workflows.• Understanding of machine learning techniques for robotics, including reinforcement learning or imitation learning.• Strong problem-solving skills with the ability to troubleshoot complex robotic systems.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Information Services industry, contributing to the development of autonomous robotic systems for industrial and commercial applications. The position involves high-impact work with cutting-edge technology and the chance to shape the future of robotics in a fast-evolving field.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

About The Role<br><br>We are seeking a highly motivated Specialist Onboard Telemetry to join our Engineering team. This role is responsible for the design, development, integration, and execution of onboard telemetry systems supporting flight test activities for precision-guided munitions (PGMs) and advanced weapon systems. The successful candidate will play a critical role in telemetry preparation, flight test execution, data acquisition, signal conditioning, metadata configuration, and post-test analysis. In addition, this position will provide technical support in troubleshooting and debugging electronic subsystems that fail production testing.<br><br>This is an exciting opportunity for an experienced electronics and telemetry engineer to work on cutting-edge aerospace and defense technologies in a highly collaborative engineering environment.<br><br>Key Responsibilities<br><br>Design, develop, and maintain onboard telemetry packs (telpacks) for precision-guided munitions, ensuring compliance with customer and industry requirements. Establish and maintain telemetry design data packs, technical documentation, and configuration records. Design and implement analog signal conditioning circuits for telemetry instrumentation and data acquisition systems. Install, configure, and validate onboard telemetry equipment and instrumentation for flight test programs. Develop and execute acceptance, verification, and validation procedures for telemetry systems. Prepare, manage, and maintain telemetry metadata for PCM, Arcnet, and onboard weapon communication systems in accordance with Interface Control Documents (ICDs). Support flight test activities, including telemetry data reception, test configuration, and real-time monitoring. Perform data reduction, processing, and analysis using tools such as MATLAB and other engineering software. Generate post-flight test reports and provide technical recommendations based on telemetry data analysis. Collaborate with multidisciplinary engineering teams to integrate telemetry systems with weapon, seeker, servo, and other onboard subsystems. Investigate, troubleshoot, and resolve electronic subsystem and production test failures through root cause analysis and corrective actions. Ensure compliance with applicable military, commercial, safety, and engineering standards while supporting continuous improvement initiatives.<br><br>Requirements<br><br>Qualifications<br><br>Engineering Degree or Diploma in Electronic Engineering/Electrical Engineering/Mechatronics Engineering/Aerospace Engineering Or a closely related discipline<br><br>Experience<br><br>10-12 years of experience in telemetry & flight test experience within Defense or Space. (Drones , Weapons , satellites, rockets etc) Working knowledge of Telemetry PCM encoding , Arcnet communication protocols & Serial communication protocols. Signal conditioning circuit design , PCB design and layout , Electrical wiring and schematic interpretation , Telemetry and flight test instrumentation systems Proficiency in laboratory testing, troubleshooting, and electronic debugging. Familiarity with military and commercial standards related to flight test systems. Knowledge of seeker, servo, or related weapon-system subsystems will be advantageous. Experience with data acquisition, data reduction, and MATLAB-based analysis. Strong understanding of manufacturing and production support environments. Practical soldering and electronics assembly skills.<br><br>Why Choose EDGE?<br><br>Working at EDGE comes with a package that genuinely reflects how much we value our people. Salaries are highly competitive and tax-free and, depending on your role and seniority, benefits can include family visas, annual flight tickets, medical insurance for you and your dependants, and education allowances for your children.<br><br>But the real investment goes further than compensation. Through our own learning academy and digital learning platform, there are extensive opportunities to develop your skills and advance your career. Add to that the freedom to innovate, strong career guidance, and the chance to work alongside world-class talent from across the globe, and EDGE becomes a place where you can keep growing, keep learning, and keep turning bold ideas into something real.<br><br>Candidate Privacy & Equal Opportunity Statement <br><br>Any information you share as part of your EDGE candidate profile or job application will be handled in accordance with applicable data protection and privacy regulations.<br><br>EDGE is an equal opportunity employer committed to building a diverse, inclusive, and high-performing workforce. We believe every individual deserves to be treated with fairness, respect and dignity, and our employment decisions reflect that. We do not discriminate based on race, colour, nationality, ethnicity, religion, gender, marital status, age, disability, pregnancy or parental status, or any other characteristic protected by applicable law.<br><br>If you feel your skills, experience and potential are a strong match for a role, we encourage you to apply even if you don’t meet every requirement. We are genuinely interested in what you can bring to EDGE.<br><br>As a global organisation, effective collaboration across international teams is central to how we work, so English proficiency is required for all roles unless otherwise stated in the job posting.<br><br>Please note that EDGE does not accept unsolicited resumes from recruitment agencies. Any resumes in the absence of a formally executed agreement in place will be deemed the property of EDGE, and no placement fees or compensation will be payable in respect of such submissions.<br><br>#ALTARIQ

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Our jobs aren’t just about giving guests a smooth check-in and check-out. Instead, we want to build and experience that is memorable and unique. Our Guest Experience Experts take the initiative to deliver a wide range of services that guide guests through their entire stay. They are empowered to move about their space and do what needs to be done. Whether processing operational needs, addressing guest requests, completing reports, or sharing the highlights of the local area, the Guest Experience Expert makes transactions feel like part of the experience.<br>No matter what position you are in, there are a few things that are critical to success – creating a safe work place, following company policies and procedures, maintaining confidentiality, protecting company assets, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Experience Experts will be on their feet and moving around (stand, sit, or walk for an extended time) and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Experience Experts – to get it right for our guests and our business each and every time.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: No related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Vehicle Electrical Installation:</b> Install and commission GPS and Telematics tracking devices; Install vehicle IoT and smart monitoring systems; Perform professional automotive wiring and cable routing; Install relays, fuses, circuit protection devices, and wiring harnesses; Diagnose and repair electrical faults; Perform battery health checks and power distribution verification; Read and interpret vehicle electrical diagrams and wiring schematics.</p><p><b>Telematics &amp; Fleet Technology Installation:</b> Install, configure, and troubleshoot GPS Tracking Devices, Fleet Management Systems, Driver Identification Systems, Driver Behavior Monitoring Devices, Vehicle Immobilizers, Ignition Control Modules, Remote Engine Cut-off Systems, Panic Buttons, SOS Switches, Digital I/O Modules, Bluetooth and Wi-Fi modules, LTE/4G Communication Devices.</p><p><b>CAN Bus &amp; Vehicle Network Integration: </b>Connect telematics devices using CAN Bus interfaces; Configure CAN Bus data acquisition modules; Perform OBD-II integration; Install FMS interfaces; Configure J1939 and J1708 communication; Verify live vehicle parameters including speed, RPM, fuel consumption, fuel level, engine hours, accelerator position, brake status, PTO status, seat belt status, engine fault codes, and DTCs.</p><p><b>Dashboard &amp; In-Cab Equipment Installation:</b> Install and integrate driver tablets, Android vehicle consoles, MDTs, driver display units, touchscreen displays, driver cameras, AI cameras, dash cameras, cabin microphones, driver speakers, buzzers, warning indicators, LED status indicators.</p><p><b>Sensor Installation:</b> Install, calibrate, and test weight measurement systems (underbody weighing systems, on-board axle load sensors, payload monitoring systems), tank monitoring sensors (water tank level, fuel level, diesel tank, chemical tank, waste collection tank), and environmental sensors (temperature, humidity, pressure, door, bin lift, hydraulic position, PTO).</p><p><b>RFID &amp; Identification Systems</b>: Install and configure RFID readers, UHF RFID readers, HF RFID readers, driver identification readers, asset identification readers, vehicle access control readers, NFC readers. </p><p><b>Camera Systems:</b> Install and configure AI vision cameras, front/rear/side cameras, 360° camera systems, reverse cameras, blind spot cameras, DVR/NVR units, ADAS cameras, driver monitoring cameras.</p><p><b>Specialized Equipment Integration: </b>Install systems on hydraulic systems, sweepers, tankers, refuse collection vehicles, compacting vehicles, street washers, water tankers, vacuum tankers, hook lift trucks, skip loaders, crane trucks, tipper trucks, recovery vehicles, municipal equipment.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Automotive Electrical Systems CAN Bus Communication OBD-II Diagnostics J1939 Protocol J1708 Protocol Vehicle Wiring &amp; Harness Repair Sensor Calibration Electrical Troubleshooting GPS Installation Telematics Configuration Mobile Device Installation Camera Installation RFID Integration Fleet Technology Systems IoT Device Integration Dashboard Electronics Power Management Systems Relay and Fuse Configuration Multimeter and Oscilloscope Usage Automotive Diagnostic Tools Strong analytical and troubleshooting skills Excellent attention to detail Ability to read and interpret technical manuals and wiring diagrams Good communication skills Ability to work independently and within a team Time management and organizational skills Commitment to quality workmanship and safety standards.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br> The role is responsible to independently conduct all laboratory procedures or under the supervision of seniors following operational rules and procedures<br> &nbsp;</p><br><br>Responsibilities:<br><p><br> Managerial&nbsp;&nbsp;&nbsp;Supervising junior staff and ensuring their abidance to going rules and policies as applied and implemented in the Section/Department/Facility (as per requirement)</p><br><p>Maintaining sufficient inventory of material supplies and equipment for performance of duties</p><br><p>Reporting shortage of materials to supervisor at earliest convenience, ordering and approving replenishments when necessary<br> Technical&nbsp;&nbsp;&nbsp;Conducting analysis of specimens to determine presence of normal and abnormal components</p><br><p>Ensuring data capture of lab results onto &nbsp;computer systems</p><br><p>Operating, calibrates and maintains lab equipment</p><br><p>Providing results to physicians as per defined SOP</p><br><p>Evaluating collected laboratory data and prepare reports as per protocol</p><br><p>Ensuring that equipment is used in the correct manner to obtain optimum results and informs Supervisor of equipment malfunction.</p><br><p>Performing on-call and shift duties as assigned, including weekends and public holidays</p><br><p>Quality &amp; Safety&nbsp;&nbsp;&nbsp;Promoting and maintaining quality in all services and ensure continuous quality improvement measures are in place. Conduct method evaluation/development as per standard policies and procedures</p><br><p>Complying with all safety, health and quality control programs and procedures as applicable</p><br><p>Complying with applicable precautions for environmental safety, infection control, using a series of interventions that minimize or prevent cross infection</p><br><p>Maintaining the strictest confidence in relation to patient information whether formally or informally recorded</p><br><p>Practicing within the expressed limits of established policies and procedures</p><br><p>Ensuring that SOP (standard operation procedures) and Quality Assurance tests are maintained within all sections</p><br><p>Being responsible for documenting all intervention in appropriate format</p><br><p>Comply and support clinical audit processes within the service and report on these as agreed</p><br><p>Communicating in a professional and courteous manner with patients, family and other medical personnel as necessary to obtain information for laboratory records, explain procedures, clarify orders and communicate status</p><br><p>Interacting courteously with doctors, nurses and other healthcare providers when answering questions or providing other information</p><br><p>Education&nbsp;&nbsp;&nbsp;Participating in training and education sessions for department staff, doctors and nurses in the safe and secure handling of drugs and equipment, prescribing (whenever applicable), administration and treatment and management i.e. teaching, induction, peer review, case studies, and clinical presentations</p><br><p>Participating in department programs/committees, various hospital committees, and staff meetings</p><br><p>Participating in the orientation and training of new employees</p><br><p>Ensuring appropriate internal and external sharing of information based on governing policies and procedures</p><br><p>Maintaining professional knowledge by attending lectures, seminars or on-line education units</p><br><p>Completing and maintaining all regulatory requirements including: licensure and certification and other mandatory training within established time frames</p><br><br>Qualifications:<br><p>Qualification :-&nbsp;</p><br><p>&nbsp;Special Certificate:-&nbsp;</p><br><p>&nbsp;&nbsp;&nbsp;Required:&nbsp;<br> a) NLT 2 yrs experience in a clinical laboratory environment<br> with Msc NLT 1 years experience in a clinical laboratory<br> environment<br> b) NLT 4 yrs experience in a clinical laboratory environment<br> * UAE National: upon completion of Internship.<br> Desired:&nbsp;<br> N.A.<br> &nbsp;</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> United Arab Emirates </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance.</p><br><p><em>We have an outstanding record in completing major Energy (Oil &amp; Gas – Power and Water), Marine, Infrastructure and Defense &amp; Security projects around the globe and we pride ourselves on delivering over the years the kind of reliability and trust that the client has the right to expect from a major EPC contractor.</em></p><br><p><strong>Archirodon has been awarded a major Oil &amp; Gas EPC project in UAE, and is currently building a team of experienced Commissioning Engineer, who will be based in our site Office.</strong></p><br><br>Job Description<br><ul><li>Review and interpret <strong>GA drawings, equipment layout drawings, vendor drawings, datasheets, P&amp;IDs, and technical specifications</strong>.</li><li>Prepare and review <strong>technical submittals, method statements, material submittals, lifting plans (as applicable), RFIs, and Technical Queries (TQs)</strong>.</li><li>Coordinate with engineering, construction, procurement, QA/QC, vendors, and planning teams to resolve technical issues related to equipment installation.</li><li>Ensure equipment installation complies with <strong>ADNOC standards</strong>, project specifications, OEM requirements, and applicable international codes (API, ASME, ISO).</li><li>Review equipment installation procedures, alignment requirements, grouting, torque values, preservation requirements, and commissioning documentation.</li><li>Monitor engineering revisions and ensure the latest approved drawings and vendor documents are available for construction.</li><li>Review Material Take-Offs (MTOs), equipment specifications, and support procurement during material and equipment evaluation.</li><li>Coordinate with Document Control to maintain engineering records and ensure proper document revision control.</li><li>Participate in constructability reviews and provide technical solutions to support safe and efficient installation.</li><li>Support pre-commissioning, commissioning, mechanical completion, and preparation of as-built documentation and handover dossiers.</li><li>Attend technical meetings with clients, consultants, vendors, and subcontractors as required.</li></ul><br>Qualifications<br><p>Bachelor's Degree in <strong>Mechanical Engineering</strong> or an equivalent engineering discipline.</p><br><br>Additional Information<br><ul><li>Minimum <strong>5–8 years</strong> of experience in mechanical equipment engineering or technical office functions within Oil &amp; Gas EPC projects.</li><li>Minimum <strong>3 years of experience</strong> on ADNOC projects or similar GCC Oil &amp; Gas facilities is preferred.</li><li>Strong knowledge of installation requirements for <strong>static and rotating equipment</strong>.</li><li>Experience with pumps, compressors, pressure vessels, heat exchangers, storage tanks, filters, skids, and packaged equipment.</li><li>Familiarity with ADNOC engineering standards, project specifications, and Permit-to-Work (PTW) requirements.</li><li>Good understanding of <strong>API, ASME, ISO, OEM standards</strong>, and mechanical installation practices.</li><li>Excellent coordination, analytical, and problem-solving skills</li></ul><p><strong>Knowledge &amp; Skills</strong></p><br><ul><li>Strong knowledge of rotating and static equipment installation, alignment, grouting, preservation, and testing.</li><li>Ability to review vendor drawings, datasheets, equipment layouts, and mechanical installation procedures.</li><li>Knowledge of international engineering standards including <strong>API, ASME, ISO</strong>, and ADNOC specifications.</li><li>Experience preparing RFIs, Technical Queries (TQs), method statements, and material submittals.</li><li>Good understanding of mechanical completion, pre-commissioning, and commissioning processes.</li><li>Excellent communication, coordination, and technical reporting skills.</li></ul><br><br> </div>

<ul><li><p>Oracle 12c Administration</p></li><li><p>Hyperledger Fabric v1.4: Network Engineering, Design and Deployment</p></li><li><p>Automating Administration with Windows PowerShell (Course 10961)</p></li><li><p>Cybersecurity Fundamentals</p></li><li><p>Microsoft 365 Fundamentals</p></li><li><p>Microsoft Azure Fundamentals</p></li><li><p>Oracle 12c R2 RAC Administration</p></li><li><p>Microsoft Azure Database Administration</p></li><li><p>Artificial Intelligence for Business Professionals</p></li><li><p>Developing Applications for the Java EE 7 Platform</p></li><li><p>Implementing a SQL Server 2016 Data Warehouse</p></li><li><p>ISO/IEC 27002 Training Courses and Lead Manager Certification</p></li><li><p>Oracle Database Cloud</p></li><li><p>Certified Artificial Intelligence Practitioner</p></li><li><p>Microsoft Office 365 Administration Certificate</p></li><li><p>Cybersecurity Operations Certificate</p></li><li><p>Certificate in Information Systems Risk and Control</p></li><li><p>Certified Network Associate Certificate</p></li><li><p>Professional Certificate in Cybersecurity Fundamentals</p></li><li><p>Certified Ethical Hacking and Forensic Investigation Professional Certificate</p></li><li><p>Professional Certificate in Information Technology Privacy</p></li><li><p>ISO/IEC 27001 Lead Auditor for Information Security Training</p></li><li><p>Certified Information Privacy Manager</p></li><li><p>Microsoft Azure IoT Developer</p></li><li><p>Introduction to Cybersecurity</p></li><li><p>Introduction to Python</p></li><li><p>Introduction to Oracle Database Programming Language</p></li><li><p>Certified Practitioner in Internet of Things</p></li><li><p>Oracle Database Administration Workshop</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Develop the section's work plans and mechanisms, and contribute to achieving the department's objectives through supervision and follow-up on all executive tasks within the related operational plan.</p><p>Minimum Qualification Experience (Years)</p><p>PhD - Information Technology - 0</p><p>Master's Degree - Information Technology - 3 years</p><p>Bachelor's Degree - Information Technology - 6 years</p></li></ul>