Mechanical Design Engineer Jobs - Abu Dhabi UAE

<h2><u>RESPONSIBILITIES</u></h2><ul><li>Defines the engineering organization charts, staffing and personnel roles with engineering discipline departments;</li><li>Defines provisional manpower histograms and controls the qualification of assigned engineering personnel;</li><li>Ensures the technical part of the Contract review;</li><li>Participates to the induction of the engineering team to contract/project requirements;</li><li>Provides instructions to the engineering team through project engineering instructions and procedures;</li><li>Ensures the issue, the validation and the maintenance of the project equipment lists and /or other key engineering documents as applicable to each project;</li><li>Ensures effective interdisciplinary coordination in particular through weekly meetings. Takes the necessary technical decisions in case of unresolved conflicts between disciplines. Controls that the engineering team properly interfaces with other project members;</li><li>Supervises the issue of engineering deliverables and approves the key engineering documents;</li><li>Participates to project planning definition by providing engineering milestones and requirements;</li><li>Ensures that engineering activity is compliant with project milestones. Alerts project management in case of unforeseen variation and suggests if needed mitigation measures</li><li>Ensures effective technical coordination with Client's representatives and as such participates to good communication with Client;</li><li>Consolidates engineering budgets based on discipline departments budgets and controls it during the course of the project. Alerts the Project Management in case of variation and suggests if needed mitigation measures;</li><li>Supervises the initiation and maintenance of project files;</li><li>Leads and attends the design and safety reviews and supervises the follow up of the outcomes;</li><li>Contributes to Project reporting for the engineering part (activities, quantities, budget,areas of concern..);</li><li>Participates to contract management by initiating, collecting and consolidating the variation requests and change orders;</li><li>Participates to Risk management for the engineering concerns;</li><li>Initiates Value engineering and best practice;</li><li>Ensures that the engineering final dossier is properly prepared and filed and that lessons learned for engineering are clearly identified;</li></ul><p><br></p><p><strong><u>Skills and Experience </u></strong></p><p><br></p><ul><li>BSc. degree in an Engineering discipline;</li><li>A postgraduate qualification in a relevant area of expertise (e.g. Business administration, project management) would be advantageous;</li><li>Min. 12 years experience relevant professional experience and a strong track record in the management of detailed engineering activities for offshore jackets, decks or pipelines;</li><li>Experience gained offshore in the installation of jackets, piles, decks and pipelines would be advantageous together with a practical appreciation of jacket and deck fabrication activities and methods.</li><li>Capable of supervisory capacity for planning, organizing, communicating and personnel management skills;</li><li>Previous experience in the engineering section of a construction company would be advantageous but not essential.</li></ul><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Policies, Processes &amp; Procedures</p><ul><li><p>Develops and oversees the implementation of departmental policies, systems, processes, procedures, and controls across the Safety Department.</p></li><li><p>Ensures compliance with all applicable procedural and legislative requirements while delivering consistent, high-quality, and cost-effective services.</p></li></ul><p>Day-to-Day Operations</p><ul><li><p>Leads the day-to-day operations of the Safety Department to ensure work processes are implemented effectively and comply with established policies, procedures, and standards.</p></li></ul><p>Investigation &amp; Reporting</p><ul><li><p>Leads investigations into significant safety incidents.</p></li><li><p>Reviews and oversees the preparation of investigation reports, ensuring findings, recommendations, and corrective actions are appropriately documented and implemented.</p></li></ul><p>Training &amp; Safety Culture</p><ul><li><p>Supervises the identification, planning, organization, and delivery of safety training programs for employees at all organizational levels.</p></li><li><p>Promotes safety awareness and supports initiatives to reduce the frequency and severity of safety incidents.</p></li></ul><p>Maintenance, Testing &amp; Inspection</p><ul><li><p>Supervises the maintenance and testing of safety protection systems throughout the plant to ensure operational readiness.</p></li><li><p>Provides specialist technical safety advice and oversees workplace evaluations to identify non-conformities with regulatory requirements and international standards.</p></li><li><p>Recommends corrective actions to ensure compliance with applicable safety regulations and best practices.</p></li><li><p>Maintains knowledge of local regulatory requirements and relevant international safety standards.</p></li></ul><p>Safety, Quality &amp; Environment</p><ul><li><p>Ensures compliance with all applicable safety, quality, and environmental management policies, procedures, and controls to maintain a safe and healthy working environment.</p></li></ul><p>People Management</p><ul><li><p>Supervises the activities and performance of team members through coaching, guidance, and regular feedback.</p></li><li><p>Ensures work is completed efficiently and in accordance with company policies, procedures, and individual performance objectives.</p></li></ul><p>Related Assignments</p><ul><li><p>Performs other related duties and responsibilities as assigned.</p></li></ul><p>Authority / Decision Making</p><p><strong>Authority</strong></p><ul><li><p>Operates within clearly defined policies, standards, and approved objectives.</p></li></ul><p><strong>Decision Making</strong></p><ul><li><p>Makes operational decisions in accordance with established practices and procedures.</p></li><li><p>Manages work outputs and ensures activities are delivered in line with departmental objectives and company requirements.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications</p><ul><li><p>Bachelor's Degree in Engineering.</p></li><li><p>Professional accreditation or membership with a recognized engineering or safety association is preferred.</p></li></ul><p>Minimum Experience</p><ul><li><p>6–8 years of relevant experience in Environment, Health, Safety, Fire &amp; Security (EHSFS) within a manufacturing industry.</p></li><li><p>Minimum of 4 years in progressively increasing supervisory or managerial roles.</p></li></ul><p>Skills</p><ul><li><p>Thorough knowledge of Safety Management Systems.</p></li><li><p>Knowledge of safety auditing systems, including design and implementation.</p></li><li><p>Strong understanding of international health and safety standards and applicable legal and regulatory requirements.</p></li><li><p>Ability to organize, prioritize, and complete tasks effectively.</p></li><li><p>Excellent verbal and written communication skills.</p></li><li><p>Proven ability to develop and write policies, procedures, and technical documentation.</p></li><li><p>Strong interpersonal and customer service skills.</p></li><li><p>Excellent time management and priority-setting abilities.</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct thorough diagnostics and troubleshooting of complex systems, utilizing advanced tools to identify malfunctions and provide timely solutions.</li><li>Perform routine maintenance on equipment to ensure optimal performance and longevity, documenting all service activities for compliance.</li><li>Install, configure, and upgrade hardware and software components, ensuring compatibility and functionality in diverse environments.</li><li>Collaborate with engineers and other technicians to design and implement system modifications that enhance operational efficiency.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>A minimum of an Associate's degree in a relevant technical field, such as Electronics or Mechanical Engineering.</p></li><li><p>At least 2 years of hands-on experience in a technician role within a relevant industry, demonstrating practical knowledge and skills.</p></li><li><p>Certifications such as CompTIA A+, Cisco Certified Network Associate (CCNA), or equivalent are highly preferred.</p></li><li><p>Proficiency in troubleshooting and repairing electronic systems, with a strong understanding of circuit design and analysis.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A Development Coordinator is responsible for assisting Development Team with overall project execution on assigned projects. The Development Coordinator will assist in ensuring compliance with the project business plan and all aspects of the development process, as well as managing the execution of certain tasks as determined by the Head of Development. Project execution will include due diligence, programming, design, entitlements, construction, completion and opening, warranty and close out.</p><p>The Development Coordinator reports to the Head of Development in the current structure.</p><p>The Development Coordinator will work closely with the Legal, Development, Projects, Finance and Marketing.</p><p>The Development Coordinator will also liaise with many external vendors in relation to consultancy and construction activities.</p><br><p><strong>PRINCIPAL ACCOUNTABILITIES</strong></p><ul><li><p>Development &amp; Project Management:</p></li><li><p>Assist in the day-to-day management of development projects including the oversight of project contractors and consultants</p></li><li><p>Assist with procurement of easements, entitlements, off-site agreements and permits.</p></li><li><p>Assist with the selection, contracting and oversight of the project team such as architects and engineers, expediters, builders, marketing, etc.</p></li><li><p>Assist with management of design and construction efforts.</p></li><li><p>Assist with documenting periodic project operational performance and positioning reviews, including budget, schedule, business plan compliance, market analysis, product review, and latest industry trends.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A Bachelor's degree in Business Administration, Project Management, or a related field, demonstrating a strong academic foundation.</li><li>Possession of a Project Management Professional (PMP) or equivalent certification is highly desirable, showcasing commitment to industry best practices.</li><li>UAE National with a strong understanding of local culture and business etiquette, facilitating effective communication and relationships.</li><li>Fluent in both English and Arabic, enabling seamless communication with diverse stakeholders and clients.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Position Title:</strong> PLC / Control Draftsman</p><p><strong>Job Purpose:</strong><br>To prepare, develop, modify, and maintain PLC, SCADA, control system, instrumentation, and electrical control drawings for Sewage Treatment Plants (STP), Pumping Stations, and Treated Sewage Effluent (TSE) facilities. The role ensures that all engineering documentation complies with project specifications, client requirements, applicable codes, standards, and quality procedures.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Prepare and update PLC control system drawings, panel layouts, and automation documentation using AutoCAD.</p></li><li><p>Develop and maintain Control Panel General Arrangement (GA) Drawings.</p></li><li><p>Prepare PLC Panel Layout Drawings and associated control system documentation.</p></li><li><p>Create and update SCADA System Architecture Drawings and Network Architecture Drawings.</p></li><li><p>Develop Control Wiring Diagrams, Loop Diagrams, and Interconnection Diagrams.</p></li><li><p>Prepare Terminal Block Drawings and Cable Schedule Drawings.</p></li><li><p>Generate and maintain I/O Allocation Drawings and Instrument I/O documentation.</p></li><li><p>Prepare Junction Box Drawings and Instrument Hook-up Drawings.</p></li><li><p>Develop and update Cause &amp; Effect Matrix Drawings for process control systems.</p></li><li><p>Coordinate with Electrical, Instrumentation, Process, and Automation Engineers to ensure drawing accuracy and consistency.</p></li><li><p>Review engineering mark-ups and incorporate revisions into project documentation.</p></li><li><p>Ensure compliance with project standards, client specifications, and industry regulations.</p></li><li><p>Maintain drawing registers, revision control records, and document management systems.</p></li><li><p>Support project execution, commissioning, and as-built documentation activities.</p></li><li><p>Participate in design reviews and technical coordination meetings as required.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications &amp; Experience:</strong></p><ul><li><p>Diploma or Degree in Electrical, Electronics, Instrumentation Engineering, or a related discipline.</p></li><li><p>Minimum 5 years of experience as a PLC / Control Draftsman in water, wastewater, utilities, industrial, or infrastructure projects.</p></li><li><p>Proficiency in AutoCAD and control system drafting practices.</p></li><li><p>Strong knowledge of PLC, SCADA, instrumentation, electrical control systems, and industrial automation.</p></li><li><p>Experience in STP, WWTP, Pumping Stations, TSE, or utility infrastructure projects is preferred.</p></li><li><p>Familiarity with international standards, control panel design, and instrumentation documentation.</p></li><li><p>Good communication skills and ability to work in a multidisciplinary engineering environment.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Position Title:</strong> Instrumentation Draftsman</p><p><strong>Job Purpose:</strong><br>To prepare, modify, and maintain instrumentation engineering drawings and documentation for Sewage Treatment Plants (STP), Pumping Stations, and Treated Sewage Effluent (TSE) facilities. The role ensures that all instrumentation drawings and engineering documentation comply with project specifications, client requirements, applicable standards, and quality procedures.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Prepare and update instrumentation drawings using AutoCAD.</p></li><li><p>Develop and maintain Instrumentation Location Layout Drawings.</p></li><li><p>Prepare and update Instrument Indexes and Instrument Data Sheets.</p></li><li><p>Develop Instrument Hook-up Drawings and Instrument Installation Details.</p></li><li><p>Prepare Loop Diagrams, Interconnection Diagrams, and Termination Drawings.</p></li><li><p>Generate and maintain Junction Box Drawings and Cable Routing Drawings.</p></li><li><p>Prepare Cable Schedules and Instrument Cable Documentation.</p></li><li><p>Develop and update Instrument I/O Lists and related engineering records.</p></li><li><p>Review and incorporate P&amp;ID mark-ups, revisions, and engineering changes.</p></li><li><p>Coordinate with Process, Mechanical, Electrical, and Control Engineers to ensure accuracy and consistency of instrumentation documentation.</p></li><li><p>Ensure compliance with project specifications, client standards, international codes, and engineering best practices.</p></li><li><p>Maintain drawing registers, document control records, and revision histories.</p></li><li><p>Support project execution, construction, commissioning, and as-built documentation activities.</p></li><li><p>Participate in design reviews and technical coordination meetings as required.</p></li><li><p>Ensure timely delivery of instrumentation drawings and documentation in accordance with project schedules.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications &amp; Experience:</strong></p><ul><li><p>Diploma or Degree in Instrumentation Engineering, Electronics Engineering, Electrical Engineering, or a related discipline.</p></li><li><p>Minimum 5 years of experience as an Instrumentation Draftsman in industrial, utility, water, wastewater, or infrastructure projects.</p></li><li><p>Proficiency in AutoCAD and instrumentation drafting standards.</p></li><li><p>Strong knowledge of instrumentation systems, field instruments, control systems, loop drawings, cable schedules, and P&amp;IDs.</p></li><li><p>Experience with STP, WWTP, Pumping Stations, TSE, Water Treatment Plants, or utility infrastructure projects is preferred.</p></li><li><p>Familiarity with international standards and instrumentation engineering documentation practices.</p></li><li><p>Good communication, coordination, and documentation skills.</p></li><li><p>Ability to work effectively within multidisciplinary engineering teams.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>As a Section Manager, you will be responsible for:</strong></p><br><ul><li><p>Issuing daily/weekly installation plans, region/zone/trade allowable, and progress feedback to the delivery team.</p></li><li><p>Briefing and enforcing Method Statements, Risk Assessments and DSTI schedules; keeping all documentation current on the project platform.</p></li><li><p>Tracking material deliveries with Project Engineers, ensuring items reach central or site stores in time for planned works.</p></li><li><p>Distributing only approved drawings/specifications to site and escalate scope changes promptly through Change Management Control.</p></li><li><p>Maintaining accurate site records of constraints, resources, tooling and consumables, coordinating with subcontractors and vendors to secure access and deliveries.</p></li><li><p>Collecting and reporting staff-and-labour performance data, KPIs and efficiency metrics each month.</p></li><li><p>Promoting safe working practices, a zero-defect mindset and adherence to project book guidelines.</p></li><li><p>Supporting testing, commissioning, spares and warranty schedules in collaboration with engineering and QA/QC teams.</p></li><li><p>Providing regular updates to the Construction Manager on progress, risks and mitigation actions.</p></li><li><p>Performing other duties reasonably required to meet project and business objectives.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Experience:</strong></p><p>5 years+ of experience as a Section Manager, ideally in an MEP or construction engineering environment, including 2–3 years in a senior UAE role with knowledge of local regulations.</p><br><p><strong>Knowledge &amp; Skills:</strong></p><ul><li><p>Proficiency in MS Office Suite (Word, Excel, PowerPoint).</p></li><li><p>Excellent written and verbal communication skills.</p></li><li><p>Proven ability to manage technical requirements, team efficiencies, commercial variables, QA/QC, programme and HSE deliverables.</p></li><li><p>Strong leadership, communication and problem-solving skills; resilient under pressure.</p></li></ul><br><p><strong>Desirable:</strong></p><ul><li><p>Data-driven reporting skills (e.g., dashboards, Lean metrics).</p></li><li><p>Familiarity with BIM-enabled field management tools.</p></li><li><p>Bachelor’s degree in mechanical, Electrical or Electronic Engineering (or NVQ equivalent).</p></li><li><p>Minimum 5 years’ MEP construction experience, including 2–3 years in a senior UAE role with knowledge of local regulations.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Ghobash Group. For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.</p><br><br>Job Description<br><ul><li>Prepare detailed <strong>MEP</strong>/<strong>HVAC layout drawings</strong>, ducting layouts, piping layouts, and equipment arrangement drawings.</li><li>Develop <strong>shop drawings</strong>, <strong>GA drawings</strong>, and <strong>as-built drawings</strong> as per project requirements.</li><li>Interpret HVAC design inputs, specifications, and engineering documents.</li><li>Coordinate with MEP/HVAC engineers to incorporate design changes and technical clarifications.</li><li>Ensure drawings comply with <strong>ASHRAE, SMACNA, NFPA</strong>, project specifications, and client standards.</li><li>Support site teams by providing drawing revisions and resolving drawing-related queries.</li><li>Maintain drawing registers, document control, and revision tracking.</li><li>Participate in technical meetings when required and provide drafting support during project execution.</li></ul><br>Qualifications<br><ul><li>Diploma / ITI in Mechanical Engineering.</li><li>Minimum <strong>4–8years</strong> of experience as an HVAC Draftsman in <strong>oil &amp; gas / industrial projects</strong>.</li><li>Strong knowledge of MEP/HVAC systems including <strong>chilled water systems, ducting, ventilation, and pressurization systems</strong>.</li></ul><br>Additional Information<br><ul><li>Technical expertise in MEP/HVAC design and execution.</li><li>Strong analytical and problem-solving skills.</li><li>Teamwork and effective communication.</li><li>Time management and attention to detail.</li><li>Commitment to safety and quality.</li><li>This is a free recruitment process, and it is completely free of cost. No visa charges or any other fees are to be paid by the employee at any stage.</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Delma Laboratory for Soil &amp; Construction Materials Inspection LLC is seeking a Customer Service Representative to manage client inquiries, coordinate sample submissions, and support laboratory operations. This role is responsible for assisting clients with testing requests, scheduling sample pickups, and ensuring timely communication of test results. The position reports to the Client Services Coordinator.</p><p><b>Key Responsibilities:</b></p><ul><li>Respond to client inquiries via phone and email regarding soil testing, construction material analysis, and laboratory services</li><li>Provide information on available tests, sample requirements, pricing, and standard turnaround times</li><li>Assist clients with sample submission procedures including documentation, labeling, and delivery instructions</li><li>Schedule sample pickups and coordinate with field technicians for site visits as requested</li><li>Log client requests and sample information into the laboratory information management system</li><li>Track testing progress and provide status updates to clients as requested</li><li>Prepare and send quotations, service confirmations, test reports, and invoices to clients</li><li>Maintain accurate records of client interactions, sample submissions, and test results</li><li>Follow up with clients on pending documentation, payments, or additional sample requirements</li><li>Direct technical inquiries to laboratory supervisors or engineers when specialized knowledge is required</li><li>Assist with administrative tasks including filing, data entry, and report preparation</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>High school diploma or equivalent; additional certification in customer service or office administration is preferred</li><li>Minimum 1 year of experience in customer service, administration, or client coordination, preferably in a laboratory, engineering, or construction services environment</li><li>Proficiency in Microsoft Office applications including Outlook, Word, and Excel</li><li>Good written and verbal communication skills in English; proficiency in Arabic is required</li><li>Strong organizational skills with attention to detail and accuracy</li><li>Ability to manage multiple tasks and prioritize effectively</li><li>Professional demeanor with a customer-focused approach</li><li>Basic understanding of construction materials or laboratory testing is helpful but not required</li></ul><p><br></p></div>

<p><h4>Job description</h4> <p>Monitors and manages the performance of design consultants to ensure accuracy, completeness, and compliance with project scope and end-user requirements. Oversees senior discipline engineers, reviews and endorses design submissions and variations, coordinates timely approvals and permits, and provides technical support in collaboration with regional/home offices. Leads pre-qualification and tender activities, evaluates alternative design solutions, ensures proper document control, and reports to the client on design progress, concerns, and recommendations while maintaining compliance with organizational quality, safety, and environmental policies.</p> <p>Based on the project site, monitor the performance of the design consultant to ensure the design correctness and completeness as well as compliance with the scope of work requirements.</p> <p>Ensure that the design consultant(s) have considered the end user’s requirements as stated in the statement of requirement.</p> <p>Control and manage the senior discipline engineers of the project management team in respect of design aspects.</p> <p>Evaluate and endorse the variation orders/concession request submitted by the design consultant(s) for client's approval.</p> <p>Attend all meetings with design consultant(s), its sub-consultants and client's meetings.</p> <p>Review and comment on all drawings and documents submitted by the design consultant(s) and ensure the incorporation of all revisions on all documents.</p> <p>Assist, monitor and ensure timely submittals of all documents from the design consultant(s) to all government departments until final necessary permits are obtained to proceed with the works to completion.</p> <p>Coordinate with regional/home office for technical support required to ensure the correctness and completeness of the design.</p> <p>Review and report to client all design consultant(s)’ monthly reports, including areas of concern and recommended plans of actions.</p> <p>Review the project strategy and provide recommendations to the client.</p> <p>Prepare questionnaire for pre-qualification of the construction contractors, carry out the pre-qualification and recommend a bidders’ list.</p> <p>Lead PM disciplines in replying to clarifications, issuing bulletins and attending technical meetings with bidders during tender stage.</p> <p>Propose alternative materials/systems to improve the design operation, future maintenance and construction costs.</p> <p>All project documents are controlled, recorded and filed as per contract requirements.</p> <p>Informs themselves of the relevant quality, environmental, safety and occupational health policies, manuals and procedures in place within the company, and ensures continued compliance with these requirements while employed.</p> <p>Perform other duties as assigned by the line manager/supervisor.</p> <h4>Qualifications</h4> <p><strong>Bachelor’s degree in architecture engineering (or similar) from a recognized university.</strong></p> <p>Master degree is preferred but not essential.</p> <p>Minimum of 15 years’ experience coupled with at least 5 years’ experience working in a design management position for a consultancy or design firm from inception to completion.</p> <p>Excellent understanding of building and villas projects.</p> <p>Understanding of contractor requirements – previous experience working for a contractor is preferred but not essential.</p> <p>Familiar with processes of design, (space & functional analysis, operators/client liaison, cross-disciplinary issues/coordination, construction interfaces, programming, cost etc.).</p> <h4>About the company</h4> <p>The company has more than 4,300 professionals in over 100 offices worldwide, providing program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. It is ranked as one of the largest program management firms in the world.</p> <p>The company is exclusively a program, project, and construction management provider, meaning it has one focus as a company: protecting client interests. Free of any potential conflicts, the entire business is geared towards helping clients achieve their desired outcomes. The company is dedicated to exceeding expectations throughout the entire construction project lifecycle and adapts to the needs of each assignment to develop tailored approaches and solutions to meet those needs.</p> <p>The company is part of a global infrastructure solutions family of companies.</p> <p>The company is an equal opportunity employer/veteran/disabled.</p> <h4>Note</h4> <p>This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities and other essential functions to be carried out as part of fulfilling the role mentioned. Various other duties as required.</p></p><p></p>

<p><strong><u>Main Responsibilities</u></strong></p><ul><li>Oversee the ordering and receipt of material, equipment, stock, and supplies for the hospital; uses the department’s computer system to maintain verification of all transactions.</li><li>Researched cost, quality and availability of goods; selects appropriate goods and vendors; and makes purchases that comply with the department’s budgetary guidelines.</li><li>As directed, assist hospital caregivers in evaluating new products and suggesting product substitutions when necessary.</li><li>Inspect items received for accurate weight, count and condition; verifies that stock meets specifications and that orders are complete; and resolve order problems with vendors and departments.</li><li>Store articles by style, size, material, etc. according to department procedures; rotates supplies to ensure that items do not expire before use.</li><li>Deliver goods to appropriate hospital or campus areas on a routine or STAT basis; Oversees the delivery or distribution of goods by filling requisitions and comparing nomenclature, stock numbers, etc.; maintains a record of stock received and issued to departments.</li><li>Repair and maintain storeroom equipment; appropriately responds to product recall notices.</li><li>Maintain a clean, sanitary and orderly storeroom; may make decisions regarding the physical layout of the storeroom.</li><li>Perform inventory of stock room supplies as directed; Supervise inventory maintenance and determine redistribution actions for stored goods when necessary.</li><li>Perform various clerical duties such as data entry of requisitions and receipts and answering phones; answering hospital staffs’ questions regarding storeroom activities as required ensuring that quality service is delivered.</li><li>Evaluate supply needs turnover rates, cost, hazardous nature of goods, and storage limitations; may consult with departments in planning the range and quality of materials to be stocked.</li><li>May handle packaging and shipping of inter-Centre, local, domestic and international packages.</li><li>Work towards meeting departmental strategies and KPIs and display a shared commitment towards contributing to the Hospital’s mission and vision</li><li>Adhere to the department and Healthpoint policies and procedures in alignment towards the regulatory and accreditation requirements.</li><li>Participate in regular departmental meetings.</li><li>Timely complete the entire performance evaluation cycles.</li><li>Contribute towards a disciplined culture of continuous improvement resulting in enhanced coordination of work activities and improved efficiency.</li><li>Promote effective communication strategies and maintain good interdepartmental liaison.</li><li>Participate in Departmental Quality Improvement activities.</li><li>Ensure providing services that are in compliance with all applicable standards and requirements of Joint Commission International (JCI), Legislation, Policies, Quality Standards and all other applicable regulatory bodies.</li><li>Maintain professionalism and confidentiality at all times.</li><li>Communicate in a culturally sensitive manner with patient and family using appropriate terminologies in patient interactions.</li></ul><p><strong><u>Education</u></strong></p><ul><li>Diploma</li></ul><p><strong><u>Experience</u></strong></p><ul><li>3 years of shipping and receiving/stockroom experience or equivalency</li><li>Healthcare insurance industry</li></ul><p><strong><u>Certification and Licensure</u></strong></p><ul><li>Valid UAE driver's license</li></ul><p><strong><u>Job Specific Skills and Abilities</u></strong></p><ul><li>Ability to move heavy objects possess a knowledge of standard warehousing</li><li>Mathematical skills</li></ul><p><br></p><p><br></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Senior Marketing Manager – Brand, Communications &amp; Creative Lead</strong></p><p><strong>Position Summary</strong></p><p>The Senior Marketing Manager is responsible for leading the company's brand strategy, marketing communications, creative development, project launches, experiential marketing initiatives, and customer engagement support. The role ensures brand communication consistency across all customer touchpoints while supporting sales performance through impactful marketing campaigns, launch strategies and integrated communications.</p><p>The position serves as the custodian of the corporate and project brands, ensuring alignment between marketing activities, customer experience, business objectives, and commercial targets.</p><br><p><strong>Key Responsibilities</strong></p><p><strong>1. Brand Strategy &amp; Management</strong></p><ul><li><p>Develop and implement corporate and project-specific brand strategies.</p></li><li><p>Act as the Brand Custodian for all company and project brands.</p></li><li><p>Ensure brand consistency across all communication channels and customer touchpoints.</p></li><li><p>Maintain and update brand guidelines, templates, and visual identity systems.</p></li><li><p>Conduct periodic brand audits and recommend improvements.</p></li></ul><br><p><strong>2. Marketing Communications</strong></p><ul><li><p>Develop integrated marketing communication plans supporting corporate and project objectives.</p></li><li><p>Oversee all internal and external communications.</p></li><li><p>Manage advertising campaigns across digital, print, outdoor, radio, and other media channels.</p></li><li><p>Ensure consistent messaging across all marketing and communication materials.</p></li><li><p>Support executive communications and leadership presentations.</p></li></ul><br><p><strong>3. Real Estate Project Marketing</strong></p><ul><li><p>Lead communication strategy for project launches and sales creative campaigns.</p></li><li><p>Support projects positioning, value propositions, and messaging frameworks.</p></li><li><p>Develop corporate &amp; sales enablement materials including:</p><ul><li><p>Brochures</p></li><li><p>Fact sheets</p></li><li><p>Sales presentations</p></li><li><p>Project videos</p></li><li><p>Customer journey materials</p></li></ul></li><li><p>Support achievement of sales and revenue targets through effective marketing initiatives.</p></li></ul><br><p><strong>4. Creative Direction &amp; Branding Development</strong></p><ul><li><p>Lead creative development across all marketing campaigns.</p></li><li><p>Manage creative ta, designers, photographers, videographers, and production partners.</p></li><li><p>Review and approve all creative assets before publication.</p></li><li><p>Ensure high-quality execution of marketing materials and campaigns.</p></li><li><p>Drive innovation in storytelling and customer engagement.</p></li></ul><br><p><strong>5. Experiential Marketing &amp; Events</strong></p><ul><li><p>Support through the development of creative communications for:</p><ul><li><p>Project launches</p></li><li><p>Exhibition participation</p></li><li><p>Roadshows</p></li><li><p>Broker events</p></li><li><p>Investor events</p></li><li><p>Customer engagement events</p></li></ul></li><li><p>Support in event agencies and suppliers to ensure successful execution.</p></li></ul><br><p><strong>6. AI &amp; Communication Innovation</strong></p><ul><li><p>Evaluate and implement AI-driven creative and communication tools.</p></li><li><p>Improve content production efficiency through automation.</p></li><li><p>Drive innovation across marketing communications and customer engagement initiatives.</p></li><li><p>Identify emerging trends and best practices relevant to the real estate sector.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Key Performance Indicators (KPIs)</strong></p><p><strong>Brand &amp; Communication</strong></p><ul><li><p>Brand Awareness</p></li><li><p>Brand Consistency Score</p></li><li><p>Share of Voice</p></li><li><p>Media Coverage Quality</p></li><li><p>Corporate Reputation Metrics</p></li></ul><p><strong>Project Marketing</strong></p><ul><li><p>Marketing Qualified Leads Generated</p></li><li><p>Sales Campaign Effectiveness</p></li><li><p>Event Attendance &amp; Conversion</p></li><li><p>Launch Campaign Performance</p></li></ul><p><strong>Operational</strong></p><ul><li><p>Campaign Delivery Timeliness</p></li><li><p>Internal Stakeholder Satisfaction</p></li><li><p>Creative Production Turnaround Time</p></li></ul><br><p><strong>Qualifications &amp; Experience</strong></p><p><strong>Education</strong></p><ul><li><p>Bachelor's Degree in Marketing, Communications, Advertising, Graphic Design, Public Relations, Business Administration, or related discipline.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>Minimum 10 years of experience in Branding, Communications, or Creative Leadership.</p></li><li><p>Experience within Real Estate Development, Government, Hospitality, Destination Marketing, or Large Corporate Organizations.</p></li><li><p>Proven experience integrated communications campaigns.</p></li><li><p>Strong background in agency management and stakeholder engagement.</p></li><li><p>Experience leading multidisciplinary creative and communication teams.</p></li></ul><br><p></p></section>

<p>Key Responsibilities:</p><ul><li><p>Conduct land, topographical, and construction site surveys.</p></li><li><p>Establish survey control points, benchmarks, levels, and site coordinates.</p></li><li><p>Verify site layouts, dimensions, elevations, and boundaries as per approved drawings.</p></li><li><p>Carry out setting-out activities for civil and construction works.</p></li><li><p>Prepare survey reports, drawings, calculations, and as-built documentation.</p></li><li><p>Operate and maintain surveying equipment such as Total Station, GPS/GNSS, Auto Level, and other relevant instruments.</p></li><li><p>Coordinate with project engineers, site teams, consultants, and contractors.</p></li><li><p>Identify and report discrepancies between site conditions and approved drawings.</p></li><li><p>Ensure accuracy and compliance with project specifications and quality standards.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Requirements:</p><ul><li><p>Diploma or Degree in Surveying, Civil Engineering, or a related field.</p></li><li><p>Relevant experience as a Land Surveyor, preferably in the UAE.</p></li><li><p>Good knowledge of construction surveying, setting-out, leveling, and topographical surveys.</p></li><li><p>Proficiency in using Total Station, GPS/GNSS, Auto Level, and related surveying equipment.</p></li><li><p>Knowledge of AutoCAD and survey data processing is preferred.</p></li><li><p>Strong communication, coordination, and problem-solving skills.</p></li><li><p>Valid UAE driving license is preferred.</p></li></ul>

<p>Position Title: Public Relations Officer Employment Type: Full Time Salary: up to 10,000 AED inclusive depending on experience and qualifications Benefits: Car Allowances Job Location: Abu Dhabi, UAE About the Client: An established industrial manufacturing company headquartered in Abu Dhabi delivering engineered fastening solutions to the industrial sectors across Middle East. Job Description: • Handle all applications and renewals through Abu Dhabi government portals (TAMM, ICP, and MOHRE). • Manage the full process for staff visas, work permits, and company license renewals to keep everything legal. • Meet and coordinate with government officials to handle inspections and all company paperwork. • Keep all employee files and visa trackers updated and provide regular reports on processing status and costs.</p><p>• Minimum 3 years of relevant experience in the UAE, preferably in Abu Dhabi • Proven experience using Abu Dhabi government portals and online systems • Valid UAE driving license • Fluent in both Arabic and English (written and spoken)</p>

<p>Position Title: Public Relations Officer Employment Type: Full Time Salary: up to 10,000 AED inclusive depending on experience and qualifications Benefits: Car Allowances Job Location: Abu Dhabi, UAE About the Client: An established industrial manufacturing company headquartered in Abu Dhabi delivering engineered fastening solutions to the industrial sectors across Middle East. Job Description: • Handle all applications and renewals through Abu Dhabi government portals (TAMM, ICP, and MOHRE). • Manage the full process for staff visas, work permits, and company license renewals to keep everything legal. • Meet and coordinate with government officials to handle inspections and all company paperwork. • Keep all employee files and visa trackers updated and provide regular reports on processing status and costs.</p><p>• Minimum 3 years of relevant experience in the UAE, preferably in Abu Dhabi • Proven experience using Abu Dhabi government portals and online systems • Valid UAE driving license • Fluent in both Arabic and English (written and spoken)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Manage and execute procurement activities for Civil and MEP projects.</li><li>Handle the complete procurement cycle, from material requisition to purchase order issuance and delivery follow-up.</li><li>Coordinate with Project Managers, Site Engineers, and others to understand material requirements and technical specifications.</li><li>Source, evaluate, and negotiate with suppliers, subcontractors, and vendors to obtain the best commercial and technical proposals.</li><li>Maintain strong relationships with local suppliers, subcontractors, and vendors.</li><li>Monitor material deliveries and ensure timely supply to project sites.</li><li>Maintain procurement records and update transactions accurately in the ERP system.</li><li>Ensure compliance with company procurement policies, procedures, and contractual requirements.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Sound knowledge of construction materials and procurement strategies.</li><li>Understanding of project execution methodologies and construction operations.</li><li>Strong proficiency in Microsoft Office applications, particularly MS Word and MS Excel.</li><li>Experience working with ERP software.</li><li>Strong organizational, negotiation, and time management skills.</li><li>Excellent communication skills in both English and Hindi.</li><li>Ability to work independently and manage multiple procurement activities simultaneously.</li><li>Valid UAE Driving License is mandatory.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Manage and execute procurement activities for Civil and MEP projects.</li><li>Handle the complete procurement cycle, from material requisition to purchase order issuance and delivery follow-up.</li><li>Coordinate with Project Managers, Site Engineers, and others to understand material requirements and technical specifications.</li><li>Source, evaluate, and negotiate with suppliers, subcontractors, and vendors to obtain the best commercial and technical proposals.</li><li>Maintain strong relationships with local suppliers, subcontractors, and vendors.</li><li>Monitor material deliveries and ensure timely supply to project sites.</li><li>Maintain procurement records and update transactions accurately in the ERP system.</li><li>Ensure compliance with company procurement policies, procedures, and contractual requirements.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Sound knowledge of construction materials and procurement strategies.</li><li>Understanding of project execution methodologies and construction operations.</li><li>Strong proficiency in Microsoft Office applications, particularly MS Word and MS Excel.</li><li>Experience working with ERP software.</li><li>Strong organizational, negotiation, and time management skills.</li><li>Excellent communication skills in both English and Hindi.</li><li>Ability to work independently and manage multiple procurement activities simultaneously.</li><li>Valid UAE Driving License is mandatory.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Asphalt roads is seeking an experienced Quantity Surveyor (QS) to join our Roads &amp; Asphalt Division in the UAE. The ideal candidate should have experience in road construction, asphalt works, and infrastructure projects. Key Responsibilities Prepare quantity take-offs and Bills of Quantities (BOQ). Estimate project costs and prepare cost reports. Review drawings, specifications, and contract documents. Prepare subcontractor comparisons and evaluate quotations. Process monthly payment applications and subcontractor invoices. Manage variations, claims, and final accounts. Monitor project costs and support budget control. Coordinate with project managers, site engineers, consultants, and clients.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Quantity Surveying or a related field, ensuring a solid foundation in core principles.</li><li>Professional certification such as MRICS or equivalent, demonstrating commitment to industry standards and ethics.</li><li>Minimum of 5 years of relevant work experience in construction or engineering projects, showcasing practical expertise.</li><li>Experience in both public and private sector projects, enhancing versatility and understanding of diverse client needs.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">About the Role: As an AI/ML Developer-2 based in Bengaluru, India, you will design, develop, and deploy advanced machine learning models and AI solutions to solve complex business problems. You will collaborate with cross-functional teams to build scalable, data-driven applications and drive innovation through end-to-end ML workflows. Responsibilities: Design, implement, and maintain machine learning models and algorithms using Python Perform data preprocessing, feature engineering, and statistical analysis on large datasets Collaborate with data engineers and software developers to integrate ML models into production systems Monitor and optimize model performance, retraining models as needed Conduct experiments to evaluate new algorithms and frameworks, and present findings to stakeholders Document code, processes, and model artifacts for reproducibility and compliance Stay up to date with the latest developments in AI/ML research and tools Required Qualifications: 5-7 years of professional experience in AI/ML development or related field Proficiency in Python and libraries such as NumPy, Pandas, Scikit-learn, TensorFlow or PyTorch Strong understanding of machine learning algorithms, deep learning architectures, and statistical modeling Experience with data preprocessing, feature engineering, and model evaluation techniques Familiarity with SQL and NoSQL databases for data extraction and manipulation Proven experience deploying ML models into production environments Preferred Qualifications: Experience with cloud platforms such as AWS, Azure, or GCP and their ML services Knowledge of MLOps practices, CI/CD pipelines, and containerization tools like Docker and Kubernetes Hands-on experience with big data technologies such as Spark, Hadoop, or Kafka Background in natural language processing, computer vision, or reinforcement learning Excellent problem-solving skills and ability to communicate technical concepts to non-technical stakeholders Master’s or higher degree in Computer Science, Engineering, or a related technical discipline </div></section>

<p>We are seeking a dynamic and experienced Construction Manager to lead and oversee construction projects in Abu Dhabi. The ideal candidate will ensure projects are completed on time, within budget, and to the highest quality standards, while maintaining safety and regulatory compliance. Responsibilities: - Plan, coordinate, and manage construction projects from initiation to completion. - Oversee contractors, subcontractors, and construction staff to ensure work quality and productivity. - Manage budgets, schedules, and project timelines to meet targets. - Ensure compliance with health and safety regulations and building codes. - Collaborate with architects, engineers, and other stakeholders to resolve project-related issues. - Prepare progress reports and communicate updates to senior management and clients. - Identify and mitigate risks to prevent project delays or cost overruns.</p><p>- Bachelor's degree in Civil Engineering, Construction Management, or a related field. - Proven experience as a Construction Manager or similar role in the construction industry. - Strong knowledge of construction procedures, materials, and safety standards. - Excellent leadership and team management skills. - Effective communication and problem-solving abilities. - Ability to work under pressure and meet tight deadlines. - Familiarity with project management software and tools. - Understanding of UAE construction regulations and standards.</p>