Mining engineer Jobs

DM G+12 APPROVED STRUCTURAL DESIGN ENGINEER<br>The hiring manager prefers a G+12 Approved Structural Engineer with 7 to 9 years (maximum) of experience with the following qualifications: <br>· Priority for applicants with working experience in Site Supervision · With a valid membership in the Society of Engineers · Knowledge in structural design for different scales of projects, including villas, buildings, and warehouses · Knowledge in structural drafting using Auto CAD.· Proficiency in ETABS, STAAD Pro, SAFE, Prokon, BIM Design, and having command over BS and ACI codes· Knowledge in DM, Trakhees, DDA, and other Govt. Authority regulations and procedures· Having experience in submission of structural-related reports in Dubai Municipality portals and other authority portals. · Working knowledge in preparing Bill of Quantities and Project Tendering process. <br>Send your CV to careers@sbkarchitects.me. <br>#hiring #dubaijobs #dubaiengineeringconsultancy

Job Requirements For NETWORK ENGINEER L1· Install, configure, and maintain network equipment such as switches, routers, firewalls, and access points · Perform onsite rack installation, cabling, and hardware replacement activities · Execute configuration tasks using console access and remote management tools · Troubleshoot network issues and perform root cause analysis (Layer 1–3 issues) · Coordinate with remote engineering teams (e.g., Systal engineers) during deployment and fault resolution · Conduct hardware health checks and preventive maintenance activities · Ensure compliance with site access, safety, and operational procedures · Support migration, upgrade, and expansion projects for network infrastructure · Document all activities, configurations, and changes accurately in service management tools Strong understanding of networking fundamentals (TCP/IP, VLANs, routing, switching) · Hands-on experience with enterprise network equipment (Cisco, Juniper, Huawei, or similar) · Knowledge of console cable usage, CLI-based configuration, and troubleshooting · Familiarity with wireless access point (AP) deployment and optimization · Experience with structured cabling and rack setup · Understanding of network monitoring

Urgent Hiring: SITE MANAGER ENGINEER (CIVIL/INFRASTRUCTURE)<br><br>Requirements:<br>- Bachelor’s Degree in Civil Engineering or related field<br>- Minimum 7-10 years experience in construction, with strong underground works exposure<br>- Skilled in lagoon construction, sewerage networks, drainage systems, pipelines, manholes, excavation, shoring, and dewatering.<br>- Strong knowledge of project management, QA/QC, and HSE standards<br>- Proven leadership in managing engineers, supervisors, subcontractors, and workforce<br>- UAE experience preferred, UAE Driving License is an advantage<br><br>Key Responsibilities:<br>- Manage and supervise all underground construction activities on site<br>- Ensure work is completed safely, on time, and as per approved drawings and specifications<br>- Coordinate with clients, consultants, and project teams<br>- Monitor progress, quality, manpower, and site safety<br>- Resolve site issues and ensure smooth project execution<br>- Submit regular progress reports to management<br><br>📍 Location: Dubai, UAE<br>💼 Employment Type: Full-time<br><br>Interested candidates may send their CV to +971 52 200 5652

Urgent Hiring: SITE MANAGER ENGINEER (CIVIL/INFRASTRUCTURE)<br><br>Requirements:<br>- Bachelor’s Degree in Civil Engineering or related field<br>- Minimum 7-10 years experience in construction, with strong underground works exposure<br>- Skilled in lagoon construction, sewerage networks, drainage systems, pipelines, manholes, excavation, shoring, and dewatering.<br>- Strong knowledge of project management, QA/QC, and HSE standards<br>- Proven leadership in managing engineers, supervisors, subcontractors, and workforce<br>- UAE experience preferred, UAE Driving License is an advantage<br><br>Key Responsibilities:<br>- Manage and supervise all underground construction activities on site<br>- Ensure work is completed safely, on time, and as per approved drawings and specifications<br>- Coordinate with clients, consultants, and project teams<br>- Monitor progress, quality, manpower, and site safety<br>- Resolve site issues and ensure smooth project execution<br>- Submit regular progress reports to management<br><br>📍 Location: Dubai, UAE<br>💼 Employment Type: Full-time<br><br>Interested candidates may send their CV to +971 52 200 5652

Urgent Hiring: SITE MANAGER ENGINEER (CIVIL/INFRASTRUCTURE)<br><br>Requirements:<br>- Bachelor’s Degree in Civil Engineering or related field<br>- Minimum 7-10 years experience in construction, with strong underground works exposure<br>- Skilled in lagoon construction, sewerage networks, drainage systems, pipelines, manholes, excavation, shoring, and dewatering.<br>- Strong knowledge of project management, QA/QC, and HSE standards<br>- Proven leadership in managing engineers, supervisors, subcontractors, and workforce<br>- UAE experience preferred, UAE Driving License is an advantage<br><br>Key Responsibilities:<br>- Manage and supervise all underground construction activities on site<br>- Ensure work is completed safely, on time, and as per approved drawings and specifications<br>- Coordinate with clients, consultants, and project teams<br>- Monitor progress, quality, manpower, and site safety<br>- Resolve site issues and ensure smooth project execution<br>- Submit regular progress reports to management<br><br>📍 Location: Dubai, UAE<br>💼 Employment Type: Full-time<br><br>Interested candidates may send their CV to +971 52 200 5652

Job Description<br><br>Job Overview:<br><br>The Senior Construction Support Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Construction Support (Eng) -related problems and will work independently with minimal guidance. The Senior Construction Support Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Construction Support (Eng). As such, they must have in-depth expertise in Construction Support (Eng) as well as broad knowledge of the Construction Support (Eng) discipline within the Engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards Direct Engineering team as a Project Coordinator on small projects Apply knowledge and skills to a wide range of standard and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area Clearly communicate and explain complex issues and work to establish understanding Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for discipline designs and drawings Maintain close cooperation with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare Discipline engineering design basis, philosophies, and technical specifications, as required Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering Prepare and review design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer Check engineering performed by others within the Discipline Perform design verification through single-discipline check/inter-discipline check (IDC) Provide technical support to all fabrication queries, including identifying defect/rectification requirements Keep the Lead engineer apprised of all activities and concerns, technical, budgetary, and manpower related Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval Capture lessons learned and enter into MDR’s Lessons Learned system Act as a resource for colleagues with less experience Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Be aware of costs related to own work and of the discipline In Fab CSE, perform/review designs, analyses, evaluations, calculations, and procedures such as:Erection sequences for jackets, topsides, and other structures Loadout procedures and guidance during the operations Construction lift analyses and procedures for activities such as floatover, stackings roll-ups, etc. Weighing procedures Design and detailing of miscellaneous fabrication yard items Crane arrangements and rigging arrangements Trailer arrangements/operations, including drawings and procedures Assist the Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations Additional skills (preferred, not mandatory) - perform/review Pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transportation and installation:Submarine pipelines Risers Spools PLETS and manifolds Cables<br>Reports to:<br><br>Functional: Discipline Lead Engineer<br><br>Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group, Project<br><br>Management Team, Subcontractors and Vendors, and Customers.<br><br>Supervises: Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s degree in Naval Architecture, Civil / Structural / Mechanical Engineering (Master’s degree preferred)8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable for onshore and offshore construction Preferably Registered Professional Engineer or member of a professional engineering society<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Senior Construction Support Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Construction Support (Eng) -related problems and will work independently with minimal guidance. The Senior Construction Support Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Construction Support (Eng). As such, they must have in-depth expertise in Construction Support (Eng) as well as broad knowledge of the Construction Support (Eng) discipline within the Engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards Direct Engineering team as a Project Coordinator on small projects Apply knowledge and skills to a wide range of standard and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area Clearly communicate and explain complex issues and work to establish understanding Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for discipline designs and drawings Maintain close cooperation with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare Discipline engineering design basis, philosophies, and technical specifications, as required Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering Prepare and review design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer Check engineering performed by others within the Discipline Perform design verification through single-discipline check/inter-discipline check (IDC) Provide technical support to all fabrication queries, including identifying defect/rectification requirements Keep the Lead engineer apprised of all activities and concerns, technical, budgetary, and manpower related Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval Capture lessons learned and enter into MDR’s Lessons Learned system Act as a resource for colleagues with less experience Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Be aware of costs related to own work and of the discipline In Fab CSE, perform/review designs, analyses, evaluations, calculations, and procedures such as:Erection sequences for jackets, topsides, and other structures Loadout procedures and guidance during the operations Construction lift analyses and procedures for activities such as floatover, stackings roll-ups, etc. Weighing procedures Design and detailing of miscellaneous fabrication yard items Crane arrangements and rigging arrangements Trailer arrangements/operations, including drawings and procedures Assist the Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations Additional skills (preferred, not mandatory) - perform/review Pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transportation and installation:Submarine pipelines Risers Spools PLETS and manifolds Cables<br>Reports to:<br><br>Functional: Discipline Lead Engineer<br><br>Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group, Project<br><br>Management Team, Subcontractors and Vendors, and Customers.<br><br>Supervises: Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s degree in Naval Architecture, Civil / Structural / Mechanical Engineering (Master’s degree preferred)8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable for onshore and offshore construction Preferably Registered Professional Engineer or member of a professional engineering society<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Contracts Engineer – Offshore Island Project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Lead Contracts Engineer – Offshore Island Project</span></u></b></p><br><br><p>KBR Abu Dhabi PMC Team is currently looking to fill a position of <b><u>Lead Contracts Engineer </u></b>for an <b>Offshore Island Project </b>to be based in UAE ( Abu Dhabi) as soon as the administrative processes are completed, will then relocate to <b>Spain Office</b> and then return to Abu Dhabi<b>&nbsp;. </b></p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Job Purpose</b></p><br><br><p><b>The Lead Contracts Engineer is responsible for managing all contractual and commercial aspects of a major offshore island development project. The role ensures that contracts are administered effectively throughout the project lifecycle, protecting the company's commercial interests while maintaining compliance with contractual obligations, project requirements, and applicable regulations.</b></p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Contract Management</b></p><br><br><ul><li><b>Lead the administration of EPC, EPCM, construction, marine, dredging, reclamation, infrastructure, and service contracts.</b></li><li><b>Review, interpret, and advise project teams on contractual rights, obligations, risks, and opportunities.</b></li><li><b>Ensure compliance with contract terms, project procedures, and company policies.</b></li><li><b>Develop and maintain contract management plans and contract registers.</b></li><li><b>Support contract negotiations, amendments, variations, and close-out activities.</b></li></ul><p><b>Claims &amp; Change Management</b></p><br><br><ul><li><b>Manage variation orders, change requests, and contractual correspondence.</b></li><li><b>Assess contractor claims related to extensions of time (EOT), disruption, acceleration, and additional costs.</b></li><li><b>Prepare entitlement assessments and commercial recommendations.</b></li><li><b>Support dispute avoidance and resolution strategies.</b></li><li><b>Maintain comprehensive contractual records to support claims and defense positions.</b></li></ul><p><b>Commercial Support</b></p><br><br><ul><li><b>Work closely with project controls, procurement, engineering, construction, and legal teams.</b></li><li><b>Evaluate commercial impacts of project changes and emerging risks.</b></li><li><b>Participate in tender evaluations and contract award recommendations.</b></li><li><b>Monitor contractor performance against contractual milestones and deliverables.</b></li><li><b>Review payment applications and commercial submissions.</b></li></ul><p><b>Risk Management</b></p><br><br><ul><li><b>Identify, analyze, and mitigate contractual and commercial risks.</b></li><li><b>Develop risk registers and recommend proactive mitigation measures.</b></li><li><b>Ensure adherence to project governance and contractual compliance requirements.</b></li></ul><p><b>Stakeholder Management</b></p><br><br><ul><li><b>Interface with clients, consultants, contractors, subcontractors, and joint venture partners.</b></li><li><b>Lead contractual meetings and commercial discussions.</b></li><li><b>Provide contractual guidance to project leadership and stakeholders.</b></li></ul><p><b>Reporting</b></p><br><br><ul><li><b>Prepare periodic commercial and contract status reports.</b></li><li><b>Provide management with updates on claims, disputes, variations, and commercial exposure.</b></li><li><b>Support audits and management reviews.</b></li></ul><p><b>Qualifications</b></p><br><br><ul><li><b>Bachelor's Degree in Engineering is a MUST</b></li><li><b>Master's degree or MBA is advantageous.</b></li><li><b>Professional certifications such as MRICS, MCIPS, CCM, PMP, or equivalent are preferred.</b></li></ul><p><b>Experience</b></p><br><br><ul><li><b>Minimum 18+ years of contract management experience in major infrastructure, marine, offshore, energy, or oil &amp; gas projects.</b></li><li><b>Proven experience with offshore island developments, dredging, reclamation, marine works, ports, or large-scale civil infrastructure projects.</b></li><li><b>Strong background in EPC/EPCM and construction contracts.</b></li><li><b>Experience managing complex claims and dispute resolution processes.</b></li></ul><p><b>Technical Skills</b></p><br><br><ul><li><b>Strong knowledge of FIDIC, NEC, EPC, and bespoke contract forms.</b></li><li><b>Expertise in contract administration, commercial management, and change management.</b></li><li><b>Strong understanding of project controls, planning, and cost management principles.</b></li><li><b>Proficiency in contract management systems and Microsoft Office applications.</b></li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Planning Engineer – Interior Fit-Out is responsible for developing, monitoring, and controlling project schedules for interior fit-out and refurbishment projects. The role ensures projects are completed on time by preparing detailed work programs, tracking progress, identifying delays, and coordinating with project teams to implement corrective actions. The Planning Engineer supports project delivery through effective planning, scheduling, resource management, and progress reporting. Develop detailed project schedules, baseline programs, and work breakdown structures (WBS) for interior fit-out projects. Prepare project execution plans, resource-loaded schedules, procurement schedules, and material delivery plans. Monitor project progress against the approved baseline schedule and identify schedule variances. Perform critical path analysis and recommend corrective actions to mitigate delays. Coordinate with project managers, site engineers, procurement, design, and commercial teams to ensure alignment with project timelines. Prepare weekly and monthly progress reports, look-ahead schedules, dashboards, and recovery plans. Update project schedules based on actual site progress and approved changes. Monitor manpower, equipment, and material utilization to optimize project performance. Track procurement, fabrication, delivery, and installation activities to ensure timely completion. Participate in project progress meetings and present schedule updates to management, consultants, and clients. Assist in evaluating extension of time (EOT) claims and delay analysis. Maintain project planning documentation and ensure compliance with company standards and contractual requirements. Support tender planning by preparing preliminary project schedules and manpower histograms. Requirements Bachelor's Degree in Civil Engineering, Construction Management, Architecture, or a related discipline. Minimum 5–8 years of planning experience in interior fit-out and construction projects within the UAE/GCC. Experience in commercial, hospitality, residential, retail, healthcare, and office fit-out projects. Experience in turnkey interior fit-out and bespoke joinery projects. Experience preparing tender programs and recovery schedules. Knowledge of Power BI or project reporting tools is an advantage. Familiarity with authority requirements and construction regulations. Benefits As per industry standards.</p> </div>

<p>Guildhall is looking for an experienced Structural Engineer to oversee structural coordination, site execution, and technical delivery across iconic tower developments. Key Responsibilities: 1. Structural Design & Coordination • Review and coordinate structural drawings, calculations, and technical specifications for high-rise building projects • Ensure all structural works are executed according to approved drawings, design standards, and project requirements • Coordinate with architects, MEP engineers, consultants, and contractors to resolve structural and technical issues 2. Site Supervision & Technical Support • Monitor construction progress and provide technical support during all project phases • Conduct site inspections and ensure structural quality, safety, and compliance standards are met • Support site teams with engineering solutions and resolve structural challenges during execution 3. Documentation & Compliance • Review shop drawings, material submittals, method statements, and RFIs related to structural works • Ensure compliance with Dubai Municipality requirements, UAE regulations, and international engineering codes • Assist with structural risk assessments and implement corrective actions where required 4. Value Engineering & Optimization • Support value engineering initiatives and recommend practical structural solutions to improve project efficiency and cost effectiveness • Provide recommendations for construction methodologies and technical enhancements where applicable 5. Coordination & Reporting • Participate in project meetings with stakeholders and consultants • Provide regular technical reports and project updates to management • Coordinate effectively with project teams to ensure timely issue resolution and project continuity</p><p>• Bachelor’s Degree in Civil Engineering, Structural Engineering, or related field • Minimum 5–10 years of experience in structural engineering within high-rise building construction projects • Strong experience in reinforced concrete, steel structures, and tower developments (G+12 and above) • UAE project experience is highly preferred • Strong understanding of structural analysis, engineering principles, and construction methodologies • Familiarity with Dubai Municipality regulations, UAE building codes, and international standards • Proficiency in ETABS, SAFE, STAAD Pro, AutoCAD, and Revit is highly preferred • DM Certified Engineer (Unlimited Floors) is highly preferred or considered an advantage • Emaar project experience is preferred • Arabic speakers are preferred</p>

<p>We are seeking a Principal Certification Engineer, Airborne Software & Hardware to join a pioneering eVTOL aircraft programme based in Dubai South. This is a unique opportunity to lead the certification strategy for safety critical airborne software and electronic hardware, helping define the development assurance approach from programme inception through aircraft type certification. Working closely with Engineering, Safety, Systems and Certification teams, you will act as the technical authority for DO-178C and DO-254 compliance, ensuring certification activities meet GCAA, EASA and FAA regulatory requirements. Key Responsibilities: • Lead the airborne software and hardware certification strategy across the aircraft programme. • Develop certification plans, compliance documentation and certification evidence. • Ensure compliance with DO-178C and DO-254 development assurance requirements. • Lead and support Stage of Involvement (SOI) audits with certification authorities. • Collaborate with systems, software, hardware and safety engineering teams throughout the development lifecycle. • Establish certification processes, standards and best practices. • Support aircraft type certification activities with GCAA, EASA and FAA. • Mentor engineers and contribute to the growth of the certification function. • Drive continuous improvement across development assurance and compliance activities.</p><p>We are looking for an experienced aerospace certification engineer with strong knowledge of airborne software and development assurance within safety critical aircraft programmes. Essential Requirements: • Extensive experience with DO-178C airborne software certification. • Experience supporting aircraft certification programmes within regulated aerospace environments. • Strong understanding of development assurance principles. • Experience working with certification authorities during audits and compliance reviews. • Excellent stakeholder management and technical communication skills. • Ability to work across multidisciplinary engineering teams. Preferred Qualifications: • Experience with DO-254 airborne electronic hardware certification. • Experience supporting GCAA, EASA or FAA certification programmes. • Bachelor's degree in Aerospace Engineering, Electrical Engineering, Software Engineering or a related discipline. • Experience with fly by wire systems, electric propulsion or battery management systems. • Interest in developing technical leadership responsibilities.</p>

<p>We are seeking a Principal Certification Engineer, Airborne Software & Hardware to join a pioneering eVTOL aircraft programme based in Dubai South. This is a unique opportunity to lead the certification strategy for safety critical airborne software and electronic hardware, helping define the development assurance approach from programme inception through aircraft type certification. Working closely with Engineering, Safety, Systems and Certification teams, you will act as the technical authority for DO-178C and DO-254 compliance, ensuring certification activities meet GCAA, EASA and FAA regulatory requirements. Key Responsibilities: • Lead the airborne software and hardware certification strategy across the aircraft programme. • Develop certification plans, compliance documentation and certification evidence. • Ensure compliance with DO-178C and DO-254 development assurance requirements. • Lead and support Stage of Involvement (SOI) audits with certification authorities. • Collaborate with systems, software, hardware and safety engineering teams throughout the development lifecycle. • Establish certification processes, standards and best practices. • Support aircraft type certification activities with GCAA, EASA and FAA. • Mentor engineers and contribute to the growth of the certification function. • Drive continuous improvement across development assurance and compliance activities.</p><p>We are looking for an experienced aerospace certification engineer with strong knowledge of airborne software and development assurance within safety critical aircraft programmes. Essential Requirements: • Extensive experience with DO-178C airborne software certification. • Experience supporting aircraft certification programmes within regulated aerospace environments. • Strong understanding of development assurance principles. • Experience working with certification authorities during audits and compliance reviews. • Excellent stakeholder management and technical communication skills. • Ability to work across multidisciplinary engineering teams. Preferred Qualifications: • Experience with DO-254 airborne electronic hardware certification. • Experience supporting GCAA, EASA or FAA certification programmes. • Bachelor's degree in Aerospace Engineering, Electrical Engineering, Software Engineering or a related discipline. • Experience with fly by wire systems, electric propulsion or battery management systems. • Interest in developing technical leadership responsibilities.</p>

Overview<br><br>The SOC Lead Engineer, SIEM has a vital role in the SOC that encompasses technical leadership, SIEM architecture design, and pre-sales support. This position is responsible for overseeing the management and coordination of SIEM solutions, within the Security Operations Center (SOC). The SOC Lead Engineer will guide senior and junior engineers in day-to-day operations across multiple environments and customers, while also assisting in pre-sales estimations of SIEM licenses. Reporting to the Senior SOC Engineering & Architecture Manager, the SOC Lead Engineer, SIEM is a seasoned professional with over a decade of experience in SIEM operations.<br><br>Responsibilities<br><br>Responsibilities: <br><br>Lead the technical operations and management of SIEM tools including Splunk, Sentinel, Log Rhythm,Qradar and Forti SIEM. Oversee the maintenance and functionality of the log collection layer, with a focus on tools like CRIBL. Ensure the health and functionality of SIEM systems through regular checks and maintenance activities. Oversee and manage SIEM licenses, including forecasting, tracking usage, and coordinating with sales for estimations and renewals. Optimize SIEM telemetry to ensure efficient and accurate data collection, correlation, and reporting. Develop and enforce logging standards across all customers, systems and platforms to maintain consistent and reliable log data Provide guidance and mentorship to SOC Engineers in managing and resolving issues related to SIEM services and log management. Participate in pre-sales activities to provide technical expertise and estimation for SIEM licenses and architectures. Collaborate with SOC Engineering & Architecture Manager to develop SIEM architecture strategies and implement initiatives. Assist in continuous process improvements to increase SOC efficiency and effectiveness. Provide regular and accurate reporting on SIEM services, SOC operations, and license management to relevant stakeholders.<br><br>Skills<br><br>Extensive knowledge and hands-on experience with SIEM tools such as Splunk, Sentinel, Log Rhythm, Forti SIEM, and log collection components like CRIBL. Proven technical leadership skills in a complex, fast-paced environment. Demonstrable pre-sales experience, particularly in estimating SIEM licenses. Strong understanding of SOC operations, cybersecurity principles, and best practices. Exceptional problem-solving skills and the ability to make decisions under pressure. Excellent mentorship and team development capabilities. High proficiency in written and verbal communication.<br><br>Qualifications<br><br>Certifications:<br><br>Certified Information Systems Security Professional (CISSP). Certified Information Security Manager (CISM). Splunk Certified Architect or similar SIEM certifications are a must. Cloud-related certifications like AWS Certified Solutions Architect, Google Professional Cloud Architect, or Microsoft Certified: Azure Solutions Architect Expert. Networking certifications such as CCNA or CCNP are advantageous.<br><br>Educational Experience<br><br>Bachelor’s degree in computer science, Information Technology, Cybersecurity, or a related field. A minimum of 10 years of experience in SIEM and SOC operations, with significant experience in SIEM management and architecture.<br><br>Prior leadership role experience within a SOC or similar cybersecurity environment

<p>We are seeking a detail-oriented Finishing Works Engineer to join our dynamic construction team in Dubai. The ideal candidate will oversee and ensure the quality and timely completion of all finishing works on our projects, contributing to the delivery of high-quality construction outcomes that meet client expectations. Responsibilities: - Supervise and manage all finishing works including plastering, painting, flooring, tiling, and other final touches on construction sites. - Coordinate with project managers, contractors, and suppliers to ensure smooth workflow and timely delivery of materials. - Inspect work at various stages to ensure compliance with design specifications, quality standards, and safety regulations. - Prepare and maintain detailed reports on progress, quality issues, and any deviations from project plans. - Resolve technical issues related to finishing works and propose effective solutions. - Ensure adherence to health and safety policies on site. - Assist in planning and scheduling finishing activities to optimize resource utilization and minimize delays.</p><p>- Bachelor’s degree in Civil Engineering, Construction Management, or a related field. - Proven experience as a Finishing Works Engineer or similar role in the construction industry. - Strong knowledge of finishing materials, techniques, and quality standards. - Excellent leadership and communication skills with the ability to coordinate multiple teams. - Familiarity with local construction codes and safety regulations in the UAE. - Problem-solving mindset and attention to detail. - Ability to work under pressure and manage time effectively to meet project deadlines. - Proficiency in relevant software tools and MS Office applications.</p>

<p>We are seeking a dedicated Quality Control Engineer to join our dynamic team in Dubai. In this role, you will ensure that all construction projects meet the highest quality standards, comply with regulations, and fulfill client expectations. You will play a pivotal role in maintaining excellence from project inception to completion. Responsibilities: - Develop, implement, and monitor quality control procedures and standards for construction projects. - Conduct regular inspections and audits to ensure compliance with quality and safety standards. - Collaborate with project managers, contractors, and suppliers to address quality issues and implement corrective actions. - Review project specifications and documents to ensure quality requirements are clearly understood and met. - Prepare detailed reports on quality assessments and non-conformance issues. - Train and supervise quality control technicians and other team members. - Stay updated with industry trends, regulations, and best practices related to construction quality control.</p><p>- Bachelor’s degree in Civil Engineering, Construction Management, or related field. - Proven 3 yrs Min experience as a Quality Control Engineer in the construction industry, preferably in UAE or GCC region. - Strong knowledge of construction processes, materials, and quality standards. - Familiarity with relevant codes, regulations, and ISO standards. - Excellent analytical, problem-solving, and communication skills. - Ability to work effectively in a fast-paced, multicultural environment. - Attention to detail and commitment to maintaining high-quality standards. - Proficient in using quality control tools and software. - Fluency in English; knowledge of Arabic is a plus.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><strong>Estimation Engineer – Landscape</strong></p><p><br></p><p><strong>Job Summary:<br></strong>We are seeking a highly skilled and detail-oriented Estimation Engineer with proven experience in landscape construction projects. The ideal candidate will play a critical role in preparing accurate cost estimates, supporting tender submissions, and ensuring competitive and compliant project bids.</p><p><br></p><p><strong>Key Responsibilities:</strong></p><br><ul><li><p>Prepare detailed Bills of Quantities (BOQs), cost estimates, and pricing breakdowns based on engineering drawings, specifications, and project requirements.</p></li><li><p>Perform accurate quantity take-offs and assess material, labor, and equipment requirements for landscape works.</p></li><li><p>Develop comprehensive scope sheets and manage supplier/subcontractor inquiries, including obtaining quotations and conducting price negotiations.</p></li><li><p>Analyze and evaluate tender documents to identify risks, discrepancies, and opportunities, and collaborate with the Estimation Lead to mitigate potential issues.</p></li><li><p>Provide technical support and guidance to associate staff throughout the estimation and tendering process.</p></li><li><p>Coordinate with design, procurement, and project teams to ensure alignment of estimates with project scope and timelines.</p></li><li><p>Maintain updated cost databases and benchmarking information for future reference.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p><strong>Qualifications and Skills:</strong></p><p><br></p><ul><li><p>Bachelor’s degree in Civil Engineering</p></li><li><p>Minimum of 5+ years of relevant experience in estimating landscape construction projects.</p></li><li><p>Strong proficiency in AutoCAD, Microsoft Excel and MS Office Suite.</p></li><li><p>Solid experience in quantity take-off and familiarity with ERP systems.</p></li><li><p>Excellent analytical, negotiation, and communication skills.</p></li><li><p>Ability to work under tight deadlines and manage multiple tenders simultaneously.</p></li><li><p>Strong attention to detail and commitment to accuracy.</p></li></ul><p><br></p><p></p></section>

Role: Senior Software Engineer - Backend (Hybrid) Location: Remote Job Type: Contract Payout: $40 - $120/hour<br>Role Overview:We are hiring for one of our clients, seeking a Senior Software Engineer to work on a contract basis. The role involves designing, developing, and maintaining software solutions for a platform serving global users. Responsibilities include collaborating with cross-functional teams to deliver scalable and high-performance applications.<br>Key Responsibilities:• Design, build, and maintain scalable software systems and applications.• Write clean, efficient, and maintainable code following best practices and industry standards.• Collaborate with product managers, designers, and other engineers to define project requirements.• Troubleshoot, debug, and optimize existing software to improve performance and reliability.• Participate in code reviews and contribute to architectural decisions.<br>Required Skills & Qualifications:• Proficiency in programming languages such as Python, Java, or Go.• Experience with cloud platforms including AWS, Azure, or Google Cloud.• Strong knowledge of data structures, algorithms, and software design patterns.• Familiarity with containerization and orchestration tools like Docker and Kubernetes.• Experience with CI/CD pipelines and version control systems like Git.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Software Development | Technology, Information and Internet | IT Services and IT Consulting industry, contributing to the development of a platform used by millions of users worldwide. The position allows for direct impact on product evolution and scalability.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Senior Software Engineer - Backend (Hybrid) Location: Remote Job Type: Contract Payout: $40 - $120/hour<br>Role Overview:We are hiring for one of our clients, seeking a Senior Software Engineer to work on a contract basis. The role involves designing, developing, and maintaining software solutions for a platform serving global users. Responsibilities include collaborating with cross-functional teams to deliver scalable and high-performance applications.<br>Key Responsibilities:• Design, build, and maintain scalable software systems and applications.• Write clean, efficient, and maintainable code following best practices and industry standards.• Collaborate with product managers, designers, and other engineers to define project requirements.• Troubleshoot, debug, and optimize existing software to improve performance and reliability.• Participate in code reviews and contribute to architectural decisions.<br>Required Skills & Qualifications:• Proficiency in programming languages such as Python, Java, or Go.• Experience with cloud platforms including AWS, Azure, or Google Cloud.• Strong knowledge of data structures, algorithms, and software design patterns.• Familiarity with containerization and orchestration tools like Docker and Kubernetes.• Experience with CI/CD pipelines and version control systems like Git.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Software Development | Technology, Information and Internet | IT Services and IT Consulting industry, contributing to the development of a platform used by millions of users worldwide. The position allows for direct impact on product evolution and scalability.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

QA/QC Engineer (Fit-Out & Finishing)<br>Code: QQE – 506<br>Industry: Fit-Out / Interior Design / Design & Build<br>Job Summary<br>We are seeking an experienced QA/QC Engineer (Fit-Out & Finishing) to join our growing site projects team across the Northern Emirates. This role is critical in maintaining exceptional workmanship standards and ensuring that all fit-out and finishing works are executed in accordance with approved drawings, materials, and project specifications.<br><br>Responsibilities<br>Conduct regular site inspections to ensure workmanship complies with approved standards and project specifications. Inspect fit-out works including joinery, gypsum, ceilings, flooring, marble, glass, metal works, painting, and decorative finishes. Verify compliance with approved drawings, materials, and design intent throughout execution. Identify defects, poor workmanship, and non-conforming works while ensuring timely implementation of corrective actions. Coordinate with Project Managers, Site Engineers, Supervisors, Consultants, and Subcontractors on all quality-related matters. Review material samples, mock-ups, and installations prior to execution. Lead snagging, de-snagging, and final quality inspections before project handover. Maintain consistent finishing quality standards across multiple projects. Support consultant inspections and ensure timely closure of observations and comments.<br><br>Qualifications<br>Bachelor's Degree in Civil Engineering, Architecture, or a related discipline.5–8 years of UAE experience in interior fit-out and finishing projects. Strong hands-on experience inspecting joinery, ceilings, gypsum works, flooring, marble, painting, glass, metal, and decorative finishes. Good understanding of construction drawings, shop drawings, material specifications, and QA/QC inspection procedures. Familiarity with inspection reports, NCRs, consultant inspections, and quality documentation. UAE Driving License is preferred due to frequent site visits.<br><br>Additional Information Gender: Male / Female<br><br>Location: Sharjah & Northern Emirates, UAE<br>Type: Full-Time<br>Contact: Please send your CV to careers@shadesinteriors.ae with code ID (QQE – 506)

Role: Machine Learning (AI) Engineer (Hybrid) Location: Remote Job Type: Full-Time Payout: $200K - $500K/yr<br>Role Overview:We are hiring for one of our clients, seeking an AI/ML Engineer to develop and deploy machine learning models that power core product features. The role involves collaborating with cross-functional teams to design scalable AI solutions that enhance user experience and operational efficiency.<br>Key Responsibilities:• Design, train, and optimize machine learning models using Python, Tensor Flow, and PyTorch frameworks.• Develop and maintain data pipelines to ensure high-quality input for model training and evaluation.• Implement MLOps practices to streamline model deployment, monitoring, and version control.• Collaborate with data scientists and software engineers to integrate AI capabilities into production systems.• Conduct performance benchmarking and A/B testing to validate model accuracy and business impact.<br>Required Skills & Qualifications:• Proficiency in Python, Tensor Flow, and PyTorch for model development and training.• Experience with MLOps tools such as MLflow, Kubeflow, or Sage Maker for deployment and monitoring.• Strong background in data preprocessing, feature engineering, and model evaluation metrics.• Familiarity with cloud platforms (AWS, GCP, or Azure) for scalable AI infrastructure.• Knowledge of software engineering best practices, including version control (Git) and CI/CD pipelines.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Software Development industry, contributing to the advancement of AI-driven product solutions. The position involves solving complex technical challenges in a collaborative environment with access to cutting-edge tools and datasets.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!