Planning Engineer Jobs in UAE

<ul><li><p>Assist in planning and execution of testing and commissioning activities for power projects and substations.</p></li><li><p>Review approved single-line diagrams, schematics, equipment specifications, protection philosophies, and commissioning procedures.</p></li><li><p>Assist in preparing testing and commissioning plans, method statements, checklists, test procedures, and schedules.</p></li><li><p>Coordinate testing and commissioning activities with Engineering, Construction, QA/QC, Planning, HSE, and Project Management teams.</p></li><li><p>Support testing of transformers, GIS/AIS switchgear, circuit breakers, CTs, PTs/CVTs, isolators, busbars, cables, protection systems, control panels, and auxiliary equipment.</p></li><li><p>Carry out pre-commissioning inspections and verify equipment readiness before testing.</p></li><li><p>Perform and record electrical tests such as insulation resistance, continuity, winding resistance, transformer ratio, contact resistance, circuit breaker timing, and other applicable tests.</p></li><li><p>Assist in protection relay testing, secondary injection testing, trip circuit testing, interlocking checks, and functional testing.</p></li><li><p>Assist with testing of metering, control, automation, SCADA, RTU, communication, and substation automation systems.</p></li><li><p>Support cable testing, including continuity, insulation resistance, phasing, sheath testing, and other required tests.</p></li><li><p>Verify control wiring, secondary circuits, alarms, indications, interlocks, and protection circuits against approved drawings and schematics.</p></li><li><p>Ensure testing activities are carried out using calibrated and approved test equipment.</p></li><li><p>Review calibration certificates of testing instruments and maintain proper test equipment records.</p></li><li><p>Prepare and maintain test sheets, test reports, inspection requests, checklists, and commissioning records.</p></li><li><p>Coordinate testing and inspection activities with clients, consultants, utility representatives, vendors, and third-party agencies.</p></li><li><p>Ensure testing activities comply with approved ITPs, method statements, project specifications, applicable IEC standards, and client requirements.</p></li><li><p>Assist in identifying equipment defects, wiring errors, test failures, and technical discrepancies and coordinate corrective actions.</p></li><li><p>Analyze test results and verify compliance with specified acceptance criteria.</p></li><li><p>Coordinate with construction teams to rectify installation defects before testing and commissioning.</p></li><li><p>Support Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), pre-commissioning, and final commissioning activities as required.</p></li><li><p>Assist in energization activities and ensure all safety, isolation, LOTO, and permit-to-work requirements are followed.</p></li><li><p>Support troubleshooting of electrical equipment and systems during testing and commissioning.</p></li><li><p>Monitor commissioning progress against the approved project schedule and report delays or technical constraints.</p></li><li><p>Participate in commissioning coordination meetings and provide updates on completed and pending activities.</p></li><li><p>Assist in preparing daily, weekly, and monthly testing and commissioning progress reports.</p></li><li><p>Coordinate with equipment manufacturers, specialist vendors, subcontractors, and commissioning teams during testing and troubleshooting.</p></li><li><p>Assist in preparing and maintaining commissioning dossiers, test certificates, inspection records, and handover documentation.</p></li><li><p>Track and close commissioning punch points, snags, and outstanding technical issues.</p></li><li><p>Ensure all test results and commissioning records are properly documented and traceable.</p></li><li><p>Support final system verification, energization, performance testing, and project handover.</p></li><li><p>Ensure compliance with project HSE requirements during all testing and commissioning activities.</p></li><li><p>Follow electrical safety procedures, LOTO requirements, safe isolation practices, and approved switching procedures.</p></li><li><p>Provide technical support to technicians and commissioning personnel as required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Electrical Engineering or a related discipline.</p></li><li><p>Typically 3–7 years of relevant experience in electrical testing and commissioning, preferably in power, substations, transmission, distribution, or EPC projects.</p></li><li><p>Good knowledge of electrical testing and commissioning procedures for power systems.</p></li><li><p>Exposure to transformers, GIS/AIS switchgear, circuit breakers, CTs, PTs/CVTs, isolators, busbars, cables, protection panels, and control systems.</p></li><li><p>Good understanding of electrical protection, control, metering, SCADA, and substation automation systems.</p></li><li><p>Ability to read and interpret single-line diagrams, protection schematics, wiring diagrams, control circuits, and equipment drawings.</p></li><li><p>Knowledge of insulation resistance, continuity, contact resistance, transformer testing, circuit breaker testing, and protection relay testing.</p></li><li><p>Familiarity with secondary injection testing and functional testing of protection and control systems.</p></li><li><p>Knowledge of IEC standards, electrical safety procedures, LOTO, isolation, and energization processes.</p></li><li><p>Experience using electrical testing equipment such as multimeters, insulation resistance testers, primary/secondary injection equipment, and relay test kits.</p></li><li><p>Ability to prepare test reports, commissioning records, checklists, and technical documentation.</p></li><li><p>Experience coordinating with clients, consultants, vendors, subcontractors, and utility representatives.</p></li><li><p>Good understanding of QA/QC requirements, ITPs, inspection procedures, and project documentation.</p></li><li><p>Strong troubleshooting, analytical, communication, coordination, and problem-solving skills.</p></li><li><p>Proficiency in MS Office and relevant testing/commissioning documentation tools.</p></li><li><p>Ability to work on site and support commissioning activities under tight project deadlines.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in HV/EHV substations, power transmission and distribution, utility infrastructure, or major EPC projects.</p></li><li><p>Exposure to GIS/AIS commissioning, transformer testing, protection relay testing, and substation automation.</p></li><li><p>Familiarity with Omicron or equivalent testing equipment.</p></li><li><p>Knowledge of IEC 61850, SCADA, RTU, and communication system testing will be an advantage.</p></li><li><p>Familiarity with DEWA, TAQA/TRANSCO, or other UAE utility/client testing and commissioning requirements.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, equipment manufacturers, and utility clients.</p></li><li><p>Relevant testing and commissioning certification or professional engineering membership will be an advantage.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st&nbsp;largest global architecture firm and the #1 Firm in the Middle East Region in their 2024 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span>We are seeking an experienced Lead Structural Engineer – Design Review with a very strong background in steel structures and extensive experience in structural design and independent technical design review. The ideal candidate will have significant experience with complex and advanced structural systems, particularly steel structures, and will be capable of leading high-level design reviews for major building projects.</span></p><br><p><span>Location: Abu Dhabi or Dubai, UAE</span></p><br><span>Key Responsibilities</span><ul><li><span>Lead independent technical design reviews of complex steel and reinforced concrete building structures.</span></li><li><span>Provide expert assessment of advanced steel structural systems, including long-span structures, special and complex connections, composite systems, steel trusses, and atypical structural configurations.</span></li><li><span>Conduct independent technical assessments comparable to CAT-2/CAT-3 design reviews, including performing self-check calculations and verifying the safety, stability, and compliance of structural designs.</span></li><li><span>Identify and document required design modifications and provide technical recommendations, including certification confirming the design is safe and compliant where required.</span></li><li><span>Review structural calculations, drawings, specifications, design assumptions, and supporting technical documentation.</span></li><li><span>Assess soil–structure interaction (SSI) assumptions, settlement predictions, lateral soil pressure considerations, and the compatibility between structural and geotechnical design inputs.</span></li><li><span>Review and assess façade structural systems, including unitized/stick systems, steel-supported façades, tension structures, and cladding support frames.</span></li><li><span>Ensure structural designs comply with applicable international standards, including SBC, AISC, ASCE, ACI, BS/Eurocodes, IBC, and ASTM.</span></li><li><span>Prepare detailed design review reports, technical memoranda, correspondence, and technical recommendations.</span></li><li><span>Provide technical support to the client during tendering, construction, design development, and value engineering stages.</span></li><li><span>Review proposed design changes and value engineering solutions to ensure structural safety, compliance, and constructability.</span></li><li><span>Coordinate with multidisciplinary teams, consultants, contractors, and other stakeholders to resolve complex structural design and interface issues.</span></li><li><span>Provide technical leadership and guidance on structural engineering matters throughout the project lifecycle.</span></li></ul> <br><strong>Qualifications</strong><br><span>Qualifications &amp; Experience</span><ul><li><span>Bachelor’s Degree in Civil or Structural Engineering is required.</span></li><li><span>Master’s Degree in Structural Engineering or a related discipline is highly preferred.</span></li><li><span>Minimum 20 years of professional experience in structural engineering, with a strong combination of structural design and design review experience.</span></li><li><span>Extensive experience in the design and review of steel and reinforced concrete buildings, with particularly strong expertise in steel structures.</span></li><li><span>Minimum 15 years of experience in a consultancy environment is preferred.</span></li><li><span>Previous experience in a senior/lead structural engineering position within the last 7 years will be highly advantageous.</span></li><li><span>Proven experience undertaking independent technical/design reviews, preferably CAT-2/CAT-3 or equivalent.</span></li><li><span>Chartered Engineer (CEng – UK) and/or Professional Engineer (PE – USA) is required.</span></li><li><span>Strong knowledge of international structural design codes and standards, including SBC, AISC, ASCE, ACI, BS/Eurocodes, IBC, and ASTM.</span></li><li><span>Strong analytical, technical report writing, communication, and stakeholder management skills.</span></li></ul> </div>

Job Title: Planning Engineer - UAE National only Sector: Rail / Metro – Communications & Control Systems Location: Dubai, United Arab Emirates Department: Bid & Project Management Job Summary<br><br>The Planning Engineer is responsible for planning and scheduling activities for assigned bids, projects, or programs against an approved baseline (Performance Measurement Baseline – PMB). The role ensures effective monitoring and control of tasks, deliverables, schedule risks, workload, and costs.<br><br>The Planning Engineer must have strong expertise in project management structures and baselines (WBS, OBS, RAM, WPDDs, PMB), scheduling techniques (PERT, Critical Path), and Schedule Risk Analysis (SRA). The role also supports claims-related activities including Extension of Time (EOT) and delay analysis, and performs basic Earned Value tracking and variance analysis to support corrective actions.<br><br>Key Responsibilities<br><br>Develop the contract programme using contract documents, WBS structures, cost and resource loading, and relevant project inputs. Support portfolio management activities (project requests and resource capacity planning). Support feasibility and strategic planning to establish milestones across pre- and post-construction phases (procurement, design, tender). Prepare resource plans using productivity rates. Prepare operational schedules and monitor project progress based on site conditions. Produce and monitor daily/weekly/monthly planning reports and KPIs. Report progress and critical planning issues to project management and propose mitigation actions for expected delays. Prepare delay analysis with the Commercial team to support Extension of Time (EOT) and claims. Follow up delays and support preparation of formal correspondence to reserve contractual rights for claims. Coordinate with client and consultant to avoid delays during project execution. Ensure quality and approval of project controls procedures, schedules, cost reports, and reporting deliverables. Prepare the Project Controls Plan and support development of project controls procedures. Lead/support risk management activities; consolidate risk analysis and monitor updates. Coordinate with Finance for target sales, budget tracking, and invoicing. Support contract reviews through collection and analysis of project performance data (schedule, cost, and resource needs).<br><br>Experience<br><br>Minimum 4 years of experience in project management. Minimum 6 years of experience in Communications and Control Systems projects (international exposure preferred). Technical experience in metro/railway systems, including communications & control, security, passenger information and comfort systems. Proven ability to manage customers/stakeholders in complex, multicultural environments across multi-disciplinary technical areas. Strong leadership skills and ability to manage teams/resources without direct reporting lines.<br><br>Education & Certifications<br><br>University Degree in Engineering (Electronic / Telecommunication / Computer Engineering). Professional certificates in Planning & Scheduling (preferred).<br><br>Technical Skills<br><br>Strong working knowledge of Primavera P6. Advanced MS Office skills (Word, Excel, Power Point). Strong understanding of scheduling concepts including Critical Path and schedule acceleration principles. Basic Earned Value tracking and variance analysis (cost and schedule).<br><br>Soft Skills<br><br>Strong organizational skills and attention to detail. Excellent communication and coordination skills. Proactive, solution-oriented mindset. Able to work effectively with one or multiple teams.<br><br>Health, Safety & Environment (HSE)<br><br>Ensure personal safety and the safety of others. Comply with local HSE laws and company HSE requirements. Use PPE and safety equipment as required. Promote environmental responsibility (waste reduction, recycling, energy/water conservation). Stop work and report immediately if any activity may impact health and safety.<br><br>SEGULA Technologies is a global engineering group, boosting the competitiveness of all major industrial sectors: automotive, aerospace, energy, rail, naval, life sciences, and telecoms. With a presence in more than 30 countries and 140 locations worldwide, the Group prioritizes close relationships with its clients, driven by the expertise of its 15,000 employees. As a leading engineering player putting innovation at the heart of its strategy, SEGULA Technologies manages large-scale projects, ranging from initial studies to industrialization and production. SEGULA TECHNOLOGIES is dedicated to gender balance and diversity, recognizing and recruiting talent of all backgrounds.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st largest global architecture firm and the #1 Firm in the Middle East Region in their 2024 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span><span>Our newest opportunity is for a talented <strong>Structural Engineer with a strong background in villas construction supervision</strong>&nbsp;</span><span>to join our </span>team in Abu Dhabi, UAE.</span></p><br><p><span>We envisage success in this role to include:</span></p><br><ul><li><p><span>Establish and maintain strong, professional relationships with clients to ensure that project expectations and contractual requirements are consistently met.</span></p><br></li><li><p><span>Oversee the delivery of Design and Construction Management services throughout all phases of the project lifecycle.</span></p><br></li><li><p><span>Lead and supervise construction activities on-site, ensuring compliance with design specifications, safety standards, and quality benchmarks.</span></p><br></li><li><p><span>Manage the development and maintenance of comprehensive project schedules, covering procurement, planning, design, and construction phases.</span></p><br></li><li><p><span>Conduct detailed structural calculations, simulations, and peer reviews to validate design integrity and regulatory compliance.</span></p><br></li><li><p><span>Collaborate with multidisciplinary teams including architects, MEP engineers, and contractors to ensure seamless integration and coordination of structural systems.</span></p><br></li><li><p><span>Support construction teams by reviewing shop drawings, responding to RFIs, and addressing design-related challenges during execution.</span></p><br></li><li><p><span>Participate in cost estimation and value engineering exercises, identifying cost-effective solutions while upholding structural safety and quality standards.</span></p><br></li><li><p><span>Communicate effectively with clients, stakeholders, and local authorities to present design solutions, manage expectations, and address any project-related concerns.</span></p><br></li></ul> <br><strong>Qualifications</strong><br><p><span>To be successful in this dynamic opportunity, we envision that your career journey to date will include 10+ years work experience partnered with a Bachelor degree in Civil Engineering.</span></p><br><p><span><strong>Proven hands-on experience in large-scale villas projects within the UAE is a key requirement.</strong></span></p><br><p><span>KEO’s performance is founded upon integrity, results, innovation, safety and our people. We embrace diversity and recognise its’ contribution to client success wherever we work.</span></p><br><p><span>We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</span></p><br> </div>

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Company Description SDV Consulting Engineers offers a comprehensive selection of services in all major engineering disciplines, project management, and project development. We provide FEED, EPCM, PMC, Commissioning, and Advisory Services for the industrial sector, primarily in manufacturing & processing, energy, hydrogen plants, cold stores, and specialty facilities. For more information, visit www.sdvce.com.<br>Role Description Oversee the overall performance of consultancy supervision services across assigned projects. Ensure project completion on time, within budget, and to the highest quality standards. Provide leadership in project planning, scheduling, and execution using tools like MS Project or Primavera. Conduct regular progress meetings with engineers, contractors, and clients, ensuring alignment on project goals. Maintain effective document control and general administrative processes. Manage risk and issue logs, and drive resolution processes. Act as the primary interface with external stakeholders, including end-users, asset owners, contractors, consultants, utility providers, and government authorities. Assist in the evaluation of contractor change requests, claims, and contractual issues. Lead critical discussions and negotiations to resolve project challenges effectively.<br>Qualifications Bachelor’s degree in Civil or Structural Engineering. At least 15 years of experience in project supervision and execution, with a minimum of 10 years in a Resident Engineer or Project Manager role, overseeing at least 2 construction projects in the UAE. Proficiency in project management and scheduling software (MS Project or Primavera). PMP and PQP certifications are advantageous. Strong leadership, critical thinking, and decision-making skills. Excellent written and spoken English communication skills. Thorough understanding of Abu Dhabi regulations, authorities’ requirements, and local construction standards is mandatory. Experience with projects related to steel and industrial projects are highly preferred. Candidate currently in UAE is mandatory.

Company Description SDV Consulting Engineers offers a comprehensive selection of services in all major engineering disciplines, project management, and project development. We provide FEED, EPCM, PMC, Commissioning, and Advisory Services for the industrial sector, primarily in manufacturing & processing, energy, hydrogen plants, cold stores, and specialty facilities. For more information, visit www.sdvce.com.<br>Role Description Oversee the overall performance of consultancy supervision services across assigned projects. Ensure project completion on time, within budget, and to the highest quality standards. Provide leadership in project planning, scheduling, and execution using tools like MS Project or Primavera. Conduct regular progress meetings with engineers, contractors, and clients, ensuring alignment on project goals. Maintain effective document control and general administrative processes. Manage risk and issue logs, and drive resolution processes. Act as the primary interface with external stakeholders, including end-users, asset owners, contractors, consultants, utility providers, and government authorities. Assist in the evaluation of contractor change requests, claims, and contractual issues. Lead critical discussions and negotiations to resolve project challenges effectively.<br>Qualifications Bachelor’s degree in Civil or Structural Engineering. At least 15 years of experience in project supervision and execution, with a minimum of 10 years in a Resident Engineer or Project Manager role, overseeing at least 2 construction projects in the UAE. Proficiency in project management and scheduling software (MS Project or Primavera). PMP and PQP certifications are advantageous. Strong leadership, critical thinking, and decision-making skills. Excellent written and spoken English communication skills. Thorough understanding of Abu Dhabi regulations, authorities’ requirements, and local construction standards is mandatory. Experience with projects related to steel and industrial projects are highly preferred. Candidate currently in UAE is mandatory.

Company Description SDV Consulting Engineers offers a comprehensive selection of services in all major engineering disciplines, project management, and project development. We provide FEED, EPCM, PMC, Commissioning, and Advisory Services for the industrial sector, primarily in manufacturing & processing, energy, hydrogen plants, cold stores, and specialty facilities. For more information, visit www.sdvce.com.<br>Role Description Oversee the overall performance of consultancy supervision services across assigned projects. Ensure project completion on time, within budget, and to the highest quality standards. Provide leadership in project planning, scheduling, and execution using tools like MS Project or Primavera. Conduct regular progress meetings with engineers, contractors, and clients, ensuring alignment on project goals. Maintain effective document control and general administrative processes. Manage risk and issue logs, and drive resolution processes. Act as the primary interface with external stakeholders, including end-users, asset owners, contractors, consultants, utility providers, and government authorities. Assist in the evaluation of contractor change requests, claims, and contractual issues. Lead critical discussions and negotiations to resolve project challenges effectively.<br>Qualifications Bachelor’s degree in Civil or Structural Engineering. At least 15 years of experience in project supervision and execution, with a minimum of 10 years in a Resident Engineer or Project Manager role, overseeing at least 2 construction projects in the UAE. Proficiency in project management and scheduling software (MS Project or Primavera). PMP and PQP certifications are advantageous. Strong leadership, critical thinking, and decision-making skills. Excellent written and spoken English communication skills. Thorough understanding of Abu Dhabi regulations, authorities’ requirements, and local construction standards is mandatory. Experience with projects related to steel and industrial projects are highly preferred. Candidate currently in UAE is mandatory.

Hiring: Software Engineer (United Arab Emirates) We are currently seeking a skilled and motivated Software Engineer to join our growing technology team in the United Arab Emirates. Position:Software Engineer Location:United Arab Emirates Job Type:Full-Time On-site / Hybrid Available Responsibilities:Design, develop, test, and maintain software applications and enterprise systems Write clean, scalable, and maintainable code following industry best practices Collaborate with cross-functional teams to deliver high-quality software solutions Develop and integrate APIs, databases, and cloud-based services Troubleshoot, debug, and optimize software performance Participate in code reviews, technical discussions, and system architecture planning Ensure software quality, security, and reliability standards are maintained Support deployment, monitoring, and continuous improvement of software products Requirements:Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field Proficiency in programming languages such as Java, Python, Java Script, C#, C++, or GoExperience with RESTful APIs, databases, Git, and version control systems Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Understanding of Agile/Scrum development methodologies Knowledge of software testing, CI/CD pipelines, and Dev Ops practices is an advantage Strong analytical, problem-solving, and communication skills Benefits:Competitive salary package Performance-based bonuses Health and insurance benefits Flexible working arrangements Professional development and certification support Exposure to regional and international technology projects Career advancement opportunities Collaborative and innovative work environment How to Apply:Please send your CV/Resume and a brief self-introduction to our recruitment team. Join us and help build innovative software solutions that power digital transformation and create meaningful impact across industries!

Hiring: Software Engineer (United Arab Emirates) We are currently seeking a skilled and motivated Software Engineer to join our growing technology team in the United Arab Emirates. Position:Software Engineer Location:United Arab Emirates Job Type:Full-Time On-site / Hybrid Available Responsibilities:Design, develop, test, and maintain software applications and enterprise systems Write clean, scalable, and maintainable code following industry best practices Collaborate with cross-functional teams to deliver high-quality software solutions Develop and integrate APIs, databases, and cloud-based services Troubleshoot, debug, and optimize software performance Participate in code reviews, technical discussions, and system architecture planning Ensure software quality, security, and reliability standards are maintained Support deployment, monitoring, and continuous improvement of software products Requirements:Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field Proficiency in programming languages such as Java, Python, Java Script, C#, C++, or GoExperience with RESTful APIs, databases, Git, and version control systems Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Understanding of Agile/Scrum development methodologies Knowledge of software testing, CI/CD pipelines, and Dev Ops practices is an advantage Strong analytical, problem-solving, and communication skills Benefits:Competitive salary package Performance-based bonuses Health and insurance benefits Flexible working arrangements Professional development and certification support Exposure to regional and international technology projects Career advancement opportunities Collaborative and innovative work environment How to Apply:Please send your CV/Resume and a brief self-introduction to our recruitment team. Join us and help build innovative software solutions that power digital transformation and create meaningful impact across industries!

Hiring: Software Engineer (United Arab Emirates) We are currently seeking a skilled and motivated Software Engineer to join our growing technology team in the United Arab Emirates. Position:Software Engineer Location:United Arab Emirates Job Type:Full-Time On-site / Hybrid Available Responsibilities:Design, develop, test, and maintain software applications and enterprise systems Write clean, scalable, and maintainable code following industry best practices Collaborate with cross-functional teams to deliver high-quality software solutions Develop and integrate APIs, databases, and cloud-based services Troubleshoot, debug, and optimize software performance Participate in code reviews, technical discussions, and system architecture planning Ensure software quality, security, and reliability standards are maintained Support deployment, monitoring, and continuous improvement of software products Requirements:Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field Proficiency in programming languages such as Java, Python, Java Script, C#, C++, or GoExperience with RESTful APIs, databases, Git, and version control systems Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Understanding of Agile/Scrum development methodologies Knowledge of software testing, CI/CD pipelines, and Dev Ops practices is an advantage Strong analytical, problem-solving, and communication skills Benefits:Competitive salary package Performance-based bonuses Health and insurance benefits Flexible working arrangements Professional development and certification support Exposure to regional and international technology projects Career advancement opportunities Collaborative and innovative work environment How to Apply:Please send your CV/Resume and a brief self-introduction to our recruitment team. Join us and help build innovative software solutions that power digital transformation and create meaningful impact across industries!

Role Description This part-time Mechanical Engineer role is a hybrid position based in Dubai, with a mix of on-site work and some work-from-home flexibility. The Mechanical Engineer will support the design, analysis, and optimization of mechanical systems and equipment for educational institutions, training facilities, and related infrastructure. Day-to-day tasks include developing and reviewing mechanical designs, preparing CAD models and technical drawings, performing calculations and simulations, and collaborating with multidisciplinary teams to ensure safety, efficiency, and compliance with local standards. The role involves contributing to small and medium-sized projects, coordinating with project managers on timelines and deliverables, and participating in research and development activities to introduce innovative solutions. The Mechanical Engineer will also assist in documentation, report writing, and providing technical support during installation, testing, and maintenance phases. Qualifications Strong foundation in Mechanical Engineering, with practical experience applying core principles to real-world systems. Proficiency in Machine Design and Computer-Aided Design (CAD) tools for developing detailed models, drawings, and specifications. Experience in Project Management, including planning, task coordination, and meeting project milestones in a multi-stakeholder environment. Research and Development (R&D) skills to evaluate new technologies, improve existing designs, and support innovation initiatives. Bachelor’s degree or higher in Mechanical Engineering or a closely related discipline. Ability to work effectively in a hybrid setting in Dubai, managing both on-site responsibilities and remote tasks. Good communication and collaboration skills, with the ability to present technical information clearly to non-technical stakeholders. Familiarity with relevant standards, safety regulations, and best practices in mechanical systems design; experience with educational or institutional projects is an advantage.

Hiring: Software Engineer (United Arab Emirates) We are currently seeking a skilled and motivated Software Engineer to join our growing technology team in the United Arab Emirates. Position:Software Engineer Location:United Arab Emirates Job Type:Full-Time On-site / Hybrid Available Responsibilities:Design, develop, test, and maintain software applications and enterprise systems Write clean, scalable, and maintainable code following industry best practices Collaborate with cross-functional teams to deliver high-quality software solutions Develop and integrate APIs, databases, and cloud-based services Troubleshoot, debug, and optimize software performance Participate in code reviews, technical discussions, and system architecture planning Ensure software quality, security, and reliability standards are maintained Support deployment, monitoring, and continuous improvement of software products Requirements:Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field Proficiency in programming languages such as Java, Python, Java Script, C#, C++, or GoExperience with RESTful APIs, databases, Git, and version control systems Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Understanding of Agile/Scrum development methodologies Knowledge of software testing, CI/CD pipelines, and Dev Ops practices is an advantage Strong analytical, problem-solving, and communication skills Benefits:Competitive salary package Performance-based bonuses Health and insurance benefits Flexible working arrangements Professional development and certification support Exposure to regional and international technology projects Career advancement opportunities Collaborative and innovative work environment How to Apply:Please send your CV/Resume and a brief self-introduction to our recruitment team. Join us and help build innovative software solutions that power digital transformation and create meaningful impact across industries!

Hiring: Software Engineer (United Arab Emirates) We are currently seeking a skilled and motivated Software Engineer to join our growing technology team in the United Arab Emirates. Position:Software Engineer Location:United Arab Emirates Job Type:Full-Time On-site / Hybrid Available Responsibilities:Design, develop, test, and maintain software applications and enterprise systems Write clean, scalable, and maintainable code following industry best practices Collaborate with cross-functional teams to deliver high-quality software solutions Develop and integrate APIs, databases, and cloud-based services Troubleshoot, debug, and optimize software performance Participate in code reviews, technical discussions, and system architecture planning Ensure software quality, security, and reliability standards are maintained Support deployment, monitoring, and continuous improvement of software products Requirements:Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field Proficiency in programming languages such as Java, Python, Java Script, C#, C++, or GoExperience with RESTful APIs, databases, Git, and version control systems Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Understanding of Agile/Scrum development methodologies Knowledge of software testing, CI/CD pipelines, and Dev Ops practices is an advantage Strong analytical, problem-solving, and communication skills Benefits:Competitive salary package Performance-based bonuses Health and insurance benefits Flexible working arrangements Professional development and certification support Exposure to regional and international technology projects Career advancement opportunities Collaborative and innovative work environment How to Apply:Please send your CV/Resume and a brief self-introduction to our recruitment team. Join us and help build innovative software solutions that power digital transformation and create meaningful impact across industries!

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled and detail-oriented Civil Engineer to plan, design, supervise, and manage construction projects. The ideal candidate will ensure projects are completed safely, on time, within budget, and in compliance with local regulations and quality standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Plan, design, and oversee construction and infrastructure projects.</p></li><li><p>Prepare project estimates, budgets, BOQs, and technical reports.</p></li><li><p>Review engineering drawings and specifications.</p></li><li><p>Supervise construction activities to ensure compliance with approved plans and safety regulations.</p></li><li><p>Coordinate with architects, consultants, contractors, and subcontractors.</p></li><li><p>Conduct site inspections and monitor project progress.</p></li><li><p>Ensure compliance with local authority regulations and building codes.</p></li><li><p>Resolve technical issues arising during construction.</p></li><li><p>Prepare project documentation, progress reports, and completion reports.</p></li><li><p>Ensure quality control and adherence to project timelines.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Civil Engineering.</p></li><li><p>2–5 years of relevant experience (or as required).</p></li><li><p>Strong knowledge of construction methods, materials, and engineering principles.</p></li><li><p>Proficiency in AutoCAD, Microsoft Office, and project management software.</p></li><li><p>Knowledge of UAE building regulations and safety standards is preferred.</p></li><li><p>Excellent problem-solving, communication, and organizational skills.</p></li><li><p>Ability to work independently and manage multiple projects.</p></li></ul><br><p><strong>Salary &amp; Benefits</strong></p><ul><li><p>Competitive salary (based on experience and qualifications)</p></li><li><p>Company-provided accommodation</p></li><li><p>Transportation</p></li><li><p>Employment visa</p></li><li><p>Medical insurance</p></li><li><p>Annual leave as per UAE Labour Law</p></li></ul><p></p></section>

Nova International General Contracting is a well established UAE-based company dedicated to delivering excellence in general contracting and construction, specialized in executing branded residences. We are committed to the highest standards of quality, innovation, and client satisfaction in every project we undertake. Our ambition is to grow as a trusted partner and deliver landmark developments that shape the future of the UAE’s built environment. Join us as we set new benchmarks in construction and project delivery.<br><br>Job Description<br><br>We are seeking a Planning Engineer to support schedule development, progress monitoring, and performance reporting for our high‑end residential project. The role is responsible for creating and maintaining detailed project schedules, tracking progress, identifying delays, and providing accurate planning insights to ensure the project is delivered on time and in compliance with contractual requirements.<br><br>Key Responsibilities<br><br>Develop and maintain baseline schedules using Primavera P6. Create WBS structures, activity sequencing, resource loading, S‑curves, and histograms. Prepare 2‑week, 4‑week, and 6‑week look‑ahead programs. Update schedules weekly/monthly and analyze progress vs. plan. Identify variances, assess critical path impacts, and prepare planning reports and dashboards. Monitor engineering, procurement, and authority approvals against schedule needs. Maintain delay/change event registers and support Time Impact Analysis (TIA). Support Extension of Time (EOT) submissions with schedules and as‑built data. Coordinate closely with site teams, engineering, procurement, QA/QC, HSE, and subcontractors. Review subcontractor schedules for alignment with the master plan. Maintain planning documentation, revisions, and as‑built records.<br><br>Qualifications<br><br>Bachelor’s degree in Civil Engineering or related field.3-5 years’ experience as a Planning Engineer (UAE preferred). Primavera P6 Certification (required) PSP® (AACE) – preferred PMP® – advantage TIA/Delay Analysis training – advantage Proven experience on high‑end residential/villa or mixed‑use projects. Strong knowledge of construction sequencing and progress measurement. Advanced proficiency in Primavera P6 and MS Office.<br><br>Additional Information<br><br>Nova International General Contracting is an equal opportunity employer. We are committed to fostering a diverse and inclusive workplace where all employees are treated fairly and with respect. Employment decisions are made based on qualifications, experience, and business requirements, without unlawful discrimination, and in accordance with applicable UAE labor and employment laws. All hiring and employment is subject to compliance with UAE regulatory requirements, including those relating to work permits and residency visas, where applicable.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Plan and supervise the maintenance activities of a wide range of instrument and control systems in the plant and coordinate these activities with operations and other maintenance teams to ensure reliable functioning of the instrument and control systems.</p><br><br><br>Job Specific Accountabilities <br><p><strong>Maintenance Planning, Execution and expertise</strong><br>•&nbsp;&nbsp; &nbsp;Provide support to the operations and maintenance teams for equipment testing, troubleshooting, routine equipment surveillance and start-up activities. Liaise with Mechanical and Electrical sections and establish a seamless integration between operation and maintenance teams to ensure compliance to the planned maintenance activities.<br>•&nbsp;&nbsp; &nbsp;Provide technical support in the field for the execution of critical maintenance activities of the equipments to ensure that the problems are resolved with minimum down time.<br>•&nbsp;&nbsp; &nbsp;Evaluate, allocate and arrange the manpower requirements for daily preventive, break down and shutdown maintenance plans.<br>•&nbsp;&nbsp; &nbsp;Assess the workload, backlog and the work plan and coordinate with relevant sections to complete the work plan. Monitor and arrange the resources for the effective compliance to the agreed work plan.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Monitor and control required material, spares, consumables and tools in high quality and quantities to ensure continuous availability.<br>•&nbsp;&nbsp; &nbsp;Conduct and implement root cause analysis of equipment failures and non-scheduled shutdowns and recommend problem resolutions to increase the reliability and availability of equipment<br>•&nbsp;&nbsp; &nbsp;Provide input to prepare and track the forthcoming major maintenance, upgrades and obsolescence issues to integrate with the division’s 5 years’ rolling business plans<br>•&nbsp;&nbsp; &nbsp;Provide technical support for development, implementation and commissioning of new projects in the mechanical design and specifications to optimize costs and ensure compliance with applicable standards and best practices.<br>•&nbsp;&nbsp; &nbsp;Participate in defining the technical requirements, technical bid evaluation and inspection of materials on receipt to ensure specifications and required quality. Monitor the performance of Contractors for the assigned works to ensure quality and standards.<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Instrumentation and Control or Electronics discipline or equivalent Professional Qualification</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>6 years of experience in Instrument and Control engineering and maintenance within a large industrial organization, preferably in the Oil and Gas industry</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p>JOB PURPOSE:<br>Senior member of well engineering team. Provide technical and operational support for drilling operations from the tendering stage through project commencement, operations and wrap up. Interface between AD IDS rig site execution team, engineering team, customer and product lines to ensure flawless job execution by preparing detailed procedures, capturing and recording NPT, lessons learned and identified risks for optimization of ongoing and future operations. Provide technical advice on adoption of new drilling/well operations technologies and practices to enhance well design and operations in compliance with HSE standards.</p><br><p>KEY ACCOUNTABILITIES:<br>Job Specific Accountabilities<br> Consider well design options based on a review of drilling objectives and recommendations proposed by operations teams.<br> Monitor operations and provide engineering support to optimize operations efficiency<br> Provide technical guidance and support in developing a well plan and generating a well design that incorporates the casing, cementing and directional drilling parameters. Solicit and evaluate input from relevant service company providers.<br> Evaluate the feasibility of and the risks involved in achieving well objectives.<br> Generate cost estimates for the proposed well design, and develop an equipment list and material requirements.<br> Review drilling rig and other equipment specifications to ensure adequacy for the proposed well design.<br> Prepare a drilling program to meet well objectives.<br> Ensure that all well planning and design activities are conducted using workflows that comply with company well engineering and HSE standards, industry best practices and statutory requirements.<br> Provide technical input for the preparation and evaluation of tenders.<br> Engagement with product lines to optimize programs<br> Implement and track the company’s AFE review process for the well plan and well design.<br> Review existing and new technologies for incorporation into the well design.<br> Liaise with drilling operations team to identify requirements for equipment, materials and services, and to coordinate scheduling of well operations.<br> Maintain effective and proper working relationships with contractors and service companies to ensure that company requirements are understood and met in terms of expected standards of quality and performance.</p><br><p>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS:<br>Minimum Qualification<br> BSc in an engineering discipline, or equivalent.<br>Minimum Experience &amp; Knowledge &amp; Skills<br> Ten (10) or more years’ experience within drilling operations and well engineering.<br> Experience from both offshore and onshore operations<br> Fluency in spoken and written English.<br> Good computer knowledge.</p><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Design and implement maintenance schedules for critical systems, ensuring optimal performance and minimal downtime.</p></li><li><p>Conduct regular inspections of facility infrastructure, identifying and addressing potential safety hazards proactively.</p></li><li><p>Oversee the operation of HVAC, plumbing, and electrical systems, ensuring compliance with local regulations and industry standards.</p></li><li><p>Manage facility improvement projects from conception to completion, coordinating with contractors and vendors effectively.</p></li><li><p>Utilize building management systems to monitor and control facility operations remotely, ensuring real-time responsiveness.</p></li><li><p>Develop and maintain accurate documentation of facility layouts, equipment specifications, and maintenance records.</p></li><li><p>Lead troubleshooting efforts for system failures, employing systematic approaches to diagnose and resolve issues swiftly.</p></li><li><p>Ensure compliance with environmental health and safety regulations, promoting a culture of safety within the facility.</p></li><li><p>Collaborate with cross-functional teams to align facility operations with organizational goals and enhance overall productivity.</p><br></li></ul><p><strong># PPM planning, condition assessment, quotation preparation, BOQ preparation, SLA management, KPI management, root cause analysis (RCA), NFPA standards, UAE Fire Code, UAE Civil Defence compliance, authority approvals, authority coordination, building regulations UAE, Abu Dhabi Municipality regulations, snagging &amp; de-snagging, project handover, site mobilization, demobilization, MEP systems knowledge, HVAC systems, chillers, FCU, AHU, electrical systems, LV systems, DB panels, plumbing systems, drainage systems, firefighting systems.<br></strong></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical, Electrical, or Civil Engineering, with a strong foundation in facility management principles.</li><li>At least 5 years of relevant experience in facilities engineering, with a proven track record in managing complex facilities.</li><li>Professional certifications such as Certified Facility Manager (CFM) or Leadership in Energy and Environmental Design (LEED) are highly desirable.</li><li>Experience in the commercial or industrial sector, with familiarity in managing large-scale facilities.</li><li>Preference for candidates with experience in energy management and sustainability initiatives.</li><li>Proficient in using Computer-Aided Design (CAD) software and Building Information Modeling (BIM) for facility planning.</li><li>Strong problem-solving skills, with the ability to think critically and make decisions under pressure.</li><li>Excellent communication skills, capable of conveying technical information clearly to non-technical stakeholders.</li><li>A proactive and hands-on approach to facility management, with a strong focus on improving operational efficiency.</li><li>Physical ability to perform site inspections and oversee maintenance tasks, including lifting and moving equipment as necessary.</li></ul><br><p></p></section>