Ship Mechanic Jobs

<p>We are seeking a qualified Mechanical Engineer with proven experience in HVAC, Plumbing, and Fire Alarm systems to join our team. The ideal candidate will be responsible for the design review, execution, coordination, supervision, testing, and commissioning of mechanical building services while ensuring compliance with project specifications, local authority regulations, and quality standards.</p><p>• Bachelor's Degree in Mechanical Engineering. • Minimum minimum 4+ years of UAE/GCC experience in building construction or MEP projects. • Mandatory hands-on experience in: • HVAC Systems • Plumbing Systems • Fire Alarm Systems • Strong knowledge of local authority regulations and international engineering standards in the UAE • Experience reviewing shop drawings and coordinating with multidisciplinary teams. • Knowledge of project scheduling and reporting is an advantage. • Valid UAE Driving License is preferred.</p>

<p>We are seeking a qualified Mechanical Engineer with proven experience in HVAC, Plumbing, and Fire Alarm systems to join our team. The ideal candidate will be responsible for the design review, execution, coordination, supervision, testing, and commissioning of mechanical building services while ensuring compliance with project specifications, local authority regulations, and quality standards.</p><p>• Bachelor's Degree in Mechanical Engineering. • Minimum minimum 4+ years of UAE/GCC experience in building construction or MEP projects. • Mandatory hands-on experience in: • HVAC Systems • Plumbing Systems • Fire Alarm Systems • Strong knowledge of local authority regulations and international engineering standards in the UAE • Experience reviewing shop drawings and coordinating with multidisciplinary teams. • Knowledge of project scheduling and reporting is an advantage. • Valid UAE Driving License is preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose complex mechanical issues using advanced diagnostic tools and equipment to ensure accurate repairs.</li><li>Execute routine maintenance tasks such as oil changes, brake inspections, and tire rotations to prolong vehicle lifespan.</li><li>Perform detailed inspections of vehicles to identify potential issues and recommend necessary repairs to customers.</li><li>Install, repair, and replace components such as engines, transmissions, and exhaust systems with precision and care.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; technical degree in automotive technology preferred for advanced roles.</li><li>Minimum of 2-3 years of hands-on experience in automotive repair and maintenance, showcasing expertise in the field.</li><li>ASE certification or equivalent is highly desirable, demonstrating proficiency and commitment to professional standards.</li><li>Experience with both foreign and domestic vehicles is a plus, allowing for a broader range of service capabilities.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>With a legacy of over 40 years, GCG Engineering Services excels in delivering cutting-edge solutions and aftermarket support for precision instruments, metering systems, flow controls, heat exchangers, automation, plus electrical &amp; instrumentation bulk trading. Renowned for its reliability and expertise, GCG Engineering Services supports the Oil &amp; Gas, Water, Power, and Industrial sectors, enhancing operational efficiency and delivering unmatched value across the GCC region.</p><br><br>Job Description<br><ul><li>Lead and direct duct fitters, pipe fitters, insulators, and helpers in carrying out daily construction activities.</li><li>Assign daily tasks to the workforce as instructed by the Mechanical Supervisor and monitor their performance.</li><li>Supervise the installation of HVAC equipment, ductwork, chilled water piping, refrigerant piping, ventilation systems, and related mechanical components.</li><li>Ensure the proper use of tools, equipment, and materials at the worksite.</li><li>Monitor workmanship and ensure installations meet the required quality standards.</li><li>Coordinate with the Mechanical Supervisor to ensure work progresses according to the project schedule.</li><li>Report daily work progress, manpower utilization, material shortages, and site issues to the Mechanical Supervisor.</li><li>Ensure all personnel comply with company HSE policies, permit-to-work requirements, and safe working practices.</li><li>Conduct daily toolbox talks and ensure the correct use of personal protective equipment (PPE).</li><li>Verify that materials issued for installation are used efficiently and report any shortages or damages.</li><li>Maintain good housekeeping and ensure the work area remains clean and free from hazards.</li><li>Assist in testing, pre-commissioning, and commissioning activities as directed by the Mechanical Supervisor.</li><li>Ensure punch list items assigned to the work crew are completed within the required timeframe.</li><li>Immediately report safety hazards, quality concerns, and technical issues to the Mechanical Supervisor for resolution.</li></ul><br>Qualifications<br><ul><li>Diploma or ITI/Technical Certificate in Mechanical Engineering, HVAC, or a related discipline.</li><li>Relevant trade certification is preferred.</li><li>Minimum 5-8 years of experience in mechanical/HVAC construction.</li><li>Experience as a Mechanical Foreman in Oil &amp; Gas projects.</li></ul><br>Additional Information<br><ul><li>Must be able to work in outdoor environments under varying weather conditions.</li><li>Will be required to work on high platforms or confined spaces, adhering strictly to safety standards.</li><li>May be required to work overtime or extended shifts based on project deadlines.</li></ul><br><br> </div>

Job Overview<br>The Senior Mechanical Engineer acts as the lead technical authority on site, managing mechanical installation, testing, and commissioning for large-scale developments. This role ensures that all site works comply with approved designs, international codes, and local authority regulations. <br>Key Responsibilities<br>Site Supervision: Oversee day-to-day mechanical construction activities, ensuring quality and adherence to project specifications. Submittal Reviews: Evaluate and approve contractor shop drawings, material submittals, method statements, and requests for information (RFIs). Team Leadership: Manage and mentor junior mechanical engineers, inspectors, and site teams. Stakeholder Coordination: Liaise with clients, contractors, architects, and local regulatory authorities. Testing & Commissioning: Witness and approve equipment testing, startup procedures, and final project handover.<br>Requirements & Qualifications<br>Education: Bachelor’s Degree in Mechanical Engineering; a Master’s degree is preferred. Experience: Minimum 15 years of total professional experience, with significant focus on construction supervision within an engineering consultancy. Regional Knowledge: Mandatory GCC or UAE working experience and familiarity with local codes (such as ADCD, DEWA, or related municipal authorities). Technical Skills: Deep expertise in HVAC, plumbing, drainage, and firefighting systems.

<p>A technical opportunity is available for a Mechanical Draftsman to support engineering and construction projects through accurate and detailed technical drawings. The role is suited to a detail-oriented professional who can transform engineering concepts into clear, practical drawings.</p> <p>Job Responsibilities:</p> <p>Prepare detailed mechanical drawings using CAD software<br /> Develop layouts, plans, sections, and fabrication drawings<br /> Convert engineering designs and specifications into technical drawings<br /> Review drawings for accuracy, dimensions, and technical details<br /> Make revisions and updates based on engineering requirements<br /> Coordinate with engineers, project teams, and other drafting disciplines<br /> Maintain organized drawing files and project documentation<br /> Assist with shop drawings and as-built drawings when required<br /> Ensure drawings follow project specifications and applicable standards<br /> Support the engineering team with drafting and documentation tasks</p> <p>Company Benefits:</p> <p>Competitive salary based on experience<br /> Professional working environment<br /> Training and development opportunities<br /> Career growth opportunities<br /> Attractive employment benefits</p> <p>To Apply, Contact:<br /> +971 58 229 7907</p>

<ul><li><p>Install, service, and repair CAR garage equipment.</p></li><li><p>Diagnose mechanical, hydraulic, pneumatic, and electrical faults.</p></li><li><p>Perform preventive maintenance and emergency breakdown repairs.</p></li><li><p>Read and interpret technical manuals, wiring diagrams, and service documents.</p></li><li><p>Test equipment after installation and repairs to ensure proper operation.</p></li><li><p>Provide on-site technical support and customer training when required.</p></li><li><p>Prepare service reports and maintain maintenance records.</p></li><li><p>Follow company safety procedures and quality standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum <strong>2–5 years</strong> of experience in garage equipment installation and maintenance.</p></li><li><p>Good knowledge of hydraulic, pneumatic, electrical, and mechanical systems.</p></li><li><p>Experience with <strong>2-post lifts, 4-post lifts, tire changers, wheel balancers, air compressors, and paint booths</strong> is preferred.</p></li><li><p>Ability to troubleshoot technical issues independently.</p></li><li><p>Basic computer and reporting skills.</p></li><li><p>Valid UAE driving license is an advantage.</p></li><li><p>Good communication skills in English , Hindi , Arabic</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>CAD drawings, estimation, office coordination</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates with minimum 1 year Gulf experience in a custom stainless steel fabrication company preferred. </p><p></p></section>

<p>We are looking for an experienced Mechanical Draftsman with hands-on experience in the heavy earthmoving machinery industry to support our engineering, workshop, and fabrication operations. The ideal candidate should have strong expertise in AutoCAD 2D and SolidWorks, along with practical knowledge of reverse engineering, CNC machining, laser/plasma/water-jet cutting, and fabrication processes related to heavy machinery and equipment. <strong>Key Responsibilities</strong></p><ul><li><p>Prepare accurate 2D mechanical drawings using AutoCAD. </p></li><li><p>Develop 3D models and mechanical components using SolidWorks. </p></li><li><p>Prepare drawings for heavy earthmoving machinery components, attachments, and fabricated parts. </p></li><li><p>Perform reverse engineering of mechanical components and machinery parts. </p></li><li><p>Prepare fabrication and manufacturing drawings with accurate dimensions, tolerances, and specifications. </p></li><li><p>Develop drawings suitable for CNC machining, laser cutting, plasma cutting, and water-jet cutting.</p></li><li><p>Coordinate with engineers, workshop technicians, fabricators, and machinists to ensure drawings are practical and production-ready. </p></li><li><p>Review and revise drawings based on engineering and workshop requirements. Maintain accurate drawing records and technical documentation. </p></li><li><p>Support the engineering and workshop teams in resolving drawing and fabrication-related issues.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree or Diploma in Mechanical Engineering or a related technical discipline.</p></li><li><p>Minimum 2+ years of relevant experience as a Mechanical Draftsman. </p></li><li><p>Mandatory experience in the heavy earthmoving machinery industry. </p></li><li><p>Strong proficiency in AutoCAD 2D. Good working knowledge of SolidWorks. </p></li><li><p>Practical experience in reverse engineering of machinery components and parts. </p></li><li><p>Knowledge of CNC machining and fabrication processes. </p></li><li><p>Experience with laser, plasma, and water-jet cutting processes. </p></li><li><p>Good understanding of mechanical components, fabrication drawings, dimensions, and tolerances. </p></li><li><p>Strong attention to detail and technical accuracy. Good communication and coordination skills.</p></li></ul>

Job Description<br><br>Wood is recruiting for a Mechanical Engineer to join its UAE business unit focusing on providing day to day Mechanical Engineering support for site operations related queries / activities / risks to delivery of safe, reliable and compliant operations.<br><br>This role is a full-time on-site role in Sharjah<br><br>Reports to: Operations Engineering Manager<br><br>Responsibilities<br><br>Wood is recruiting for a Mechanical Engineer to join its UAE business unit focusing on providing day to day Mechanical Engineering support for site operations related queries / activities / risks to delivery of safe, reliable and compliant operations.<br><br>This role is a full-time on-site role in Sharjah<br><br>Reports to: Operations Engineering Manager<br><br>#Wood #UAE #Sharjah #Rotational Support / Remote Engineer - Mechanical<br><br>The role<br><br>This is an exciting opportunity for an experienced Rotational Support / Remote Engineer - Mechanical to join our UAE Business Unit.<br><br>Our Clients and Projects <br><br>Designing the future. Transforming the world. <br><br>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonization ambitions.<br><br>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonizing existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.<br><br>What We Can Offer<br><br>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion; we are an organization actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession <br><br>Job Objectives<br><br>The Mechanical Engineer will provide day to day Mechanical Engineering support for site operations related queries / activities / risks to delivery of safe, reliable and compliant operations. Collaborates with site-based team to ensure that identified longer term engineering solutions are progressed to the appropriate team to reduce risk and grow production.<br><br>Responsibilities<br><br>Performs day to day Mechanical Engineering support to deliver immediate operations support, working closely with the site team to resolve issues under the direction of the Operations Engineering Manager. Ensures that asset Mechanical Engineering risks are understood, appropriately risk assessed, and actions driven to reduce risk within agreed timeframe. Defines static mechanical engineering operating envelopes, monitors health of static mechanical equipment using operating envelopes, records and investigates excursions outside operating envelopes. Monitors static Mechanical Engineering Key Performance Indicators (KPIs) and initiates corrective action as necessary. Provides Mechanical Engineering support to technical Management of Change (MoCs) and Engineering Queries (EQs). Identifies production vulnerabilities and optimization opportunities to support production forecast and growth. Write, review, recommend technical input into Site Operations Procedures (SOPs). Provides static Mechanical Engineering coaching to client engineers. Generates, revises, reviews discipline Technical Documentation.<br><br>Qualifications<br><br>What makes you remarkable? <br><br>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.<br><br>Expected<br><br>BSc or BEng or MEng (UK), BSc (US), or international equivalent in Mechanical Engineering or relevant engineering subject. Professional accreditation – Chartered Engineer or Professional Engineer.<br><br>Experience And Job Requirements<br><br>Significant experience in an Operations Mechanical Engineering support role. Advanced technical knowledge and experience in engineering, with sound knowledge of the relevant industry codes, standards and regulations, and the ability to initiate guidance on the appropriate designs and systems to prevent, control and mitigate risks. Sound stakeholder management experience.<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Inspect the installation, assembly, alignment, and commissioning of<strong> rotating equipment</strong>, including pumps, compressors, turbines, blowers, fans, gearboxes, motors, and associated auxiliary systems.</p></li><li><p>Inspect <strong>static equipment</strong> such as pressure vessels, heat exchangers, storage tanks, columns, reactors, separators, filters, boilers, and piping supports.</p></li><li><p>Verify equipment installation complies with approved drawings, manufacturer recommendations, Engineering Standards, project specifications, and applicable international codes.</p></li><li><p>Review and witness Inspection Requests (IRs), Material Inspection Requests (MIRs), and Inspection and Test Plans (ITPs).</p></li><li><p>Inspect equipment foundations, anchor bolts, baseplates, grout installation, and shaft alignment using approved procedures.</p></li><li><p>Witness mechanical inspections and testing, including hydrostatic, pneumatic, leak, pressure, functional, performance, vibration, and run tests.</p></li><li><p>Verify preservation, storage, handling, and installation practices for mechanical equipment.</p></li><li><p>Inspect piping connections, flange alignment, bolting, gasket installation, torque, and equipment interfaces.</p></li><li><p>Verify dimensional inspections, tolerances, clearances, leveling, and alignment before equipment acceptance.</p></li><li><p>Ensure materials, equipment, and spare parts comply with approved material specifications and project requirements.</p></li><li><p>Review inspection reports, factory acceptance test (FAT) records, site acceptance test (SAT) reports, calibration certificates, and mechanical completion dossiers.</p></li><li><p>Ensure all inspection activities comply with HSE requirements, Permit to Work (PTW) procedures, and safe work practices.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Diploma or Bachelor's Degree in Mechanical Engineering or a related engineering discipline.</p></li><li><p>ADNOC Approval as a QC Mechanical Inspector (advantage).</p></li><li><p>Additional certifications such as API 510, API 570, API 653, ASNT, CSWIP, or AWS CWI are advantageous.</p></li><li><p>HSE certifications are preferred.</p></li><li><p>Minimum 3–10 years of experience in mechanical inspection within oil and gas, petrochemical, refinery, LNG, or industrial projects.</p></li><li><p>Experience working on ADNOC projects or with major EPC contractors in the UAE.</p></li><li><p>Proven experience in the inspection, testing, and commissioning of rotating and static mechanical equipment.</p></li></ul><br><p><strong>Technical Knowledge</strong></p><ul><li><p>Engineering Standards and Specifications.</p></li><li><p>ASME, API, ASTM, ISO, and relevant international mechanical standards.</p></li><li><p>API 610 (Centrifugal Pumps), API 617 (Compressors), API 618 (Reciprocating Compressors), API 661 (Air-Cooled Heat Exchangers), API 650 (Storage Tanks), API 620, API 510, API 570, and API 653, as applicable.</p></li><li><p>Inspection and Test Plans (ITPs).</p></li><li><p>Mechanical alignment, vibration monitoring, shaft alignment, and equipment preservation requirements.</p></li><li><p>Hydrostatic and pneumatic testing procedures.</p></li><li><p>QA/QC documentation and NCR management.</p></li></ul><p></p></section>

<p><strong>Requirements:</strong></p><ul><li><p>Bachelor's Degree/Diploma in Mechanical Engineering</p></li><li><p>2–3 years of relevant site experience</p></li><li><p>Knowledge of HVAC, plumbing, and firefighting systems</p></li><li><p>Valid <strong>UAE driving license</strong> (mandatory)</p></li><li><p>Good communication and coordination skills</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Immediate joiners preferred</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b><span>Location:</span></b><span>&nbsp;UAE</span><br></p><br><p><b><span>Salary &amp; Benefits:</span></b><br></p><br> <ul> <li><span>AED 5,000/month</span><br></li> <li><span>Accommodation &amp; Transportation Provided</span><br></li> </ul> <br><span>Requirements<span>ITI/Diploma in Diesel, Automotive, or Electrical Engineering</span><br><span>4–5 years of experience with heavy equipment</span><br><span>Ability to diagnose and repair hydraulic system faults</span><br><span>Proficient in using diagnostic tools to troubleshoot complex electrical and electronic issues in heavy equipment</span><br> </span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for an experienced <b>Senior Mechanical Engineer</b> to join our construction team. The successful candidate will be responsible for managing and supervising mechanical engineering activities, ensuring that works are completed safely, efficiently, and in accordance with approved drawings, specifications, project requirements, and UAE standards.</p><p>Key Responsibilities</p><ul><li>Lead and supervise mechanical engineering activities on construction projects.</li><li>Review and coordinate mechanical drawings, specifications, and technical documents.</li><li>Manage installation, testing, commissioning, and inspection of mechanical systems.</li><li>Coordinate with consultants, contractors, subcontractors, and other engineering disciplines.</li><li>Monitor site progress and ensure works are completed according to the approved schedule.</li><li>Review technical submittals, material approvals, shop drawings, method statements, and inspection requests.</li><li>Ensure compliance with project specifications, authority requirements, and applicable UAE codes and standards.</li><li>Identify and resolve technical and site-related mechanical issues.</li><li>Conduct regular site inspections and ensure quality standards are maintained.</li><li>Coordinate with the QA/QC team regarding inspections, testing, and documentation.</li><li>Assist with project planning, manpower requirements, material procurement, and cost control.</li><li>Attend technical meetings and provide engineering solutions when required.</li><li>Ensure compliance with HSE requirements and promote safe working practices.</li><li>Prepare progress reports and provide regular updates to the Project Manager.</li></ul><p>Requirements</p><ul><li>Bachelor’s Degree in Mechanical Engineering.</li><li>Minimum <b>10 years of relevant experience</b>, preferably with strong UAE construction experience.</li><li>Strong knowledge of mechanical building services and construction activities.</li><li>Experience in managing site teams and coordinating with consultants and subcontractors.</li><li>Good knowledge of UAE standards, regulations, and authority requirements.</li><li>Ability to read and interpret engineering drawings and specifications.</li><li>Strong leadership, communication, coordination, and problem-solving skills.</li><li>Proficiency in relevant engineering and project management software.</li><li>Candidates willing to work in <b>Abu Dhabi and Ruwais</b> are preferred.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Skills – Senior Mechanical Engineer</p><ul><li>Mechanical Engineering &amp; Construction Management</li><li>HVAC Systems &amp; Installation</li><li>Plumbing &amp; Drainage Systems</li><li>Fire Fighting &amp; Fire Protection Systems</li><li>Chilled Water Systems</li><li>MEP Coordination</li><li>Shop Drawing &amp; Technical Drawing Review</li><li>Material Submittals &amp; Technical Submissions</li><li>Testing &amp; Commissioning</li><li>QA/QC &amp; Inspection Procedures</li><li>Project Planning &amp; Site Coordination</li><li>Contractor &amp; Subcontractor Management</li><li>Technical Problem Solving</li><li>Cost &amp; Material Control</li><li>HSE Compliance</li><li>UAE Codes, Standards &amp; Authority Requirements</li><li>AutoCAD / BIM / Revit Knowledge</li><li>Team Leadership &amp; Manpower Management</li><li>Consultant &amp; Client Coordination</li><li>Progress Reporting &amp; Documentation</li><li>Strong Communication &amp; Negotiation Skills</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Troubleshoot and diagnose complex mechanical, hydraulic, and pneumatic system malfunctions, minimizing downtime through rapid problem-solving.</li><li>Perform preventative maintenance on a wide range of industrial equipment, including machinery, pumps, and conveyors, ensuring optimal performance and longevity.</li><li>Conduct precision alignment and balancing of rotating equipment using laser alignment tools, reducing vibration and improving efficiency.</li><li>Fabricate and repair machine parts using welding, machining, and other metalworking techniques, restoring equipment to operational standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possesses a high school diploma or equivalent; a vocational or technical school certificate in industrial mechanics is highly preferred.</li><li>Holds relevant certifications, such as a Certified Maintenance Technician (CMT) or similar, demonstrating a commitment to professional development.</li><li>Demonstrates a minimum of 5 years of hands-on experience in industrial maintenance, working with diverse equipment and systems.</li><li>Exhibits a strong understanding of various industrial settings, including manufacturing, processing, or similar environments.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Description:</strong></p><br><p>The NSSTC is looking to hire Mechanical Engineer to support the development of the NSSTC facility, to design and develop ground support and test equipment, and to create electro-mechanical hardware intended for both ground and space operation. You’ll be working as part of a team designing and building CubeSats and Small Spacecraft as part of the center’s charter. As an engineer you will be asked to perform a variety of tasks related to the development of the center including (but not limited to) support of the facilities development; test equipment development; and design, analysis, assembly, test, and verification/validation of performance of ground and space-based hardware and software. The ability to work with students at UAE University as a mentor is required. Travel may be required – both domestic and international. The position is located at the NSSTC facility in Al Ain. Compensation based on experience level. Tasks and Responsibilities: • Interfacing with a multi-disciplinary team including professionals, faculty, graduate and undergraduate students • Documenting interfaces and requirements • Designing discipline-specific components for space flight applications • Modeling and analyzing designs of ground and space hardware • Performing other engineering tasks (analyzing mass properties, structure development, harness routing, simple stress and/or thermal analysis, design development, production planning, drawing creation, etc.) • Support assembly and integration operation </p><br><p><strong>Minimum Qualifications:</strong></p><br><p>• Bachelor or higher degree in Mechanical Engineering </p><br><p><strong>Preferred Qualifications:</strong></p><br><p> • Demonstrated experience with CAD tools • Familiarity with designing and packaging electro-mechanical systems for the space environment • Cleanroom experience </p><br> </div>

<p>We are seeking a skilled Mechanical Engineer to join our dynamic construction team in Dubai. The ideal candidate will play a key role in designing, developing, and overseeing mechanical systems to ensure the successful completion of our construction projects. This position offers the opportunity to work in a fast-paced environment where innovation and precision are highly valued. Responsibilities: - Design, develop, and supervise mechanical systems and components for construction projects. - Collaborate with architects, civil engineers, and other stakeholders to ensure integrated and efficient project completion. - Conduct site inspections and surveys to monitor mechanical installations and ensure compliance with safety and quality standards. - Prepare technical drawings, specifications, and project reports. - Perform calculations and simulations to validate system designs and performance. - Identify and resolve mechanical issues promptly to avoid delays and cost overruns. - Stay updated on industry best practices, materials, and technologies relevant to mechanical engineering in construction.</p><p>- Bachelor's degree in Mechanical Engineering or related field. - Proven experience in mechanical engineering within the construction industry. - Strong understanding of mechanical systems, HVAC, plumbing, and fire protection. - Proficiency in computer-aided design (CAD) software and other engineering tools. - Excellent problem-solving and analytical skills. - Ability to work collaboratively within multidisciplinary teams. - Strong communication and interpersonal skills. - Familiarity with local building codes, regulations, and safety standards. - Willingness to work on-site in Dubai and manage multiple projects effectively.</p>

<p>We are seeking a Mechanical Engineer with experience in industrial projects, mechanical maintenance, and shutdown activities. The ideal candidate will have hands-on experience in managing site execution, coordinating with clients, supervising manpower, and ensuring timely completion of mechanical works in heavy industrial environments. Key Responsibilities: - Coordinate with client maintenance teams to understand requirements and identify new work opportunities. - Support planning and execution of mechanical maintenance, repair, and shutdown activities. - Supervise site activities and ensure smooth execution of mechanical works. - Coordinate manpower, materials, tools, and equipment for efficient project delivery. - Ensure all works are executed in compliance with safety standards, client requirements, and project specifications. - Prepare and review method statements, technical submissions, and work-related documentation. - Monitor project progress and ensure completion within planned timelines. - Prepare daily and weekly progress reports. - Coordinate with QA/QC, HSE, and other departments to ensure quality and compliance. - Monitor productivity and support effective resource utilization.</p><p>Candidate Requirements: - Bachelor’s degree in Mechanical Engineering. - 4–5 years of experience in mechanical maintenance or industrial projects. - Experience in heavy industrial environments such as aluminium, oil & gas, power plants, or manufacturing facilities. - UAE experience with major industrial clients is highly preferred. - Strong knowledge of mechanical systems, equipment maintenance, repair works, and shutdown activities. - Experience in planning and executing shutdown projects. - Knowledge of method statements, technical submissions, and permit systems. - Proficiency in MS Office and basic project reporting.</p>

<p>We are seeking a Mechanical Engineer with experience in industrial projects, mechanical maintenance, and shutdown activities. The ideal candidate will have hands-on experience in managing site execution, coordinating with clients, supervising manpower, and ensuring timely completion of mechanical works in heavy industrial environments. Key Responsibilities: - Coordinate with client maintenance teams to understand requirements and identify new work opportunities. - Support planning and execution of mechanical maintenance, repair, and shutdown activities. - Supervise site activities and ensure smooth execution of mechanical works. - Coordinate manpower, materials, tools, and equipment for efficient project delivery. - Ensure all works are executed in compliance with safety standards, client requirements, and project specifications. - Prepare and review method statements, technical submissions, and work-related documentation. - Monitor project progress and ensure completion within planned timelines. - Prepare daily and weekly progress reports. - Coordinate with QA/QC, HSE, and other departments to ensure quality and compliance. - Monitor productivity and support effective resource utilization.</p><p>Candidate Requirements: - Bachelor’s degree in Mechanical Engineering. - 4–5 years of experience in mechanical maintenance or industrial projects. - Experience in heavy industrial environments such as aluminium, oil & gas, power plants, or manufacturing facilities. - UAE experience with major industrial clients is highly preferred. - Strong knowledge of mechanical systems, equipment maintenance, repair works, and shutdown activities. - Experience in planning and executing shutdown projects. - Knowledge of method statements, technical submissions, and permit systems. - Proficiency in MS Office and basic project reporting.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Maintenance &amp; Repairs</strong></p><ul><li><p>Perform preventive and corrective maintenance on heavy equipment, machinery, and hydraulic systems.</p></li><li><p>Diagnose and repair hydraulic faults involving pumps, cylinders, valves, hoses, hydraulic motors, and related components.</p></li><li><p>Inspect machinery for mechanical, hydraulic, electrical, and safety-related defects.</p></li><li><p>Troubleshoot equipment breakdowns and carry out emergency repairs to minimize operational downtime.</p></li><li><p>Repair and overhaul engines, transmissions, axles, braking systems, steering systems, and powertrain components.</p></li><li><p>Conduct pressure testing, performance testing, and system diagnostics on hydraulic equipment.</p></li><li><p>Replace defective components and verify proper operation after repairs.</p></li></ul><ul><li><p>Read and interpret hydraulic schematics, technical manuals, wiring diagrams, and equipment drawings.</p></li><li><p>Identify root causes of equipment failures and implement effective repair solutions.</p></li></ul><p>Perform routine inspections and recommend corrective actions to prevent future breakdowns</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Required Qualifications:</strong></p><ul><li><p>Diploma, ITI, Technical Certification, or equivalent qualification in Mechanical Engineering, Heavy Equipment Maintenance, Hydraulics, or related field.</p></li><li><p>Minimum 8–15 years of experience in heavy equipment maintenance and hydraulic system repairs.</p></li><li><p>Valid driving license (preferred).</p></li></ul><p><strong>Required Skills &amp; Competencies:</strong></p><ul><li><p>Strong knowledge of hydraulic systems, components, and troubleshooting techniques.</p></li><li><p>Experience working on excavators, wheel loaders, cranes, forklifts, generators, pumps, and other heavy equipment.</p></li><li><p>Ability to diagnose and repair mechanical, hydraulic, and basic electrical faults.</p></li><li><p>Knowledge of preventive maintenance programs and asset management practices.</p></li><li><p>Proficiency in using diagnostic tools, testing equipment, and hydraulic testing instruments.</p></li><li><p>Ability to read and interpret technical drawings, schematics, and service manuals.</p></li><li><p>Good communication, problem-solving, and teamwork skills.</p></li><li><p>Strong understanding of workplace health, safety, and environmental requirements.</p></li></ul><p></p></section>