Sound Engineering Jobs - Dubai UAE

<p>Guildhall is looking for an experienced Structural Engineer to oversee structural coordination, site execution, and technical delivery across iconic tower developments. Key Responsibilities: 1. Structural Design & Coordination • Review and coordinate structural drawings, calculations, and technical specifications for high-rise building projects • Ensure all structural works are executed according to approved drawings, design standards, and project requirements • Coordinate with architects, MEP engineers, consultants, and contractors to resolve structural and technical issues 2. Site Supervision & Technical Support • Monitor construction progress and provide technical support during all project phases • Conduct site inspections and ensure structural quality, safety, and compliance standards are met • Support site teams with engineering solutions and resolve structural challenges during execution 3. Documentation & Compliance • Review shop drawings, material submittals, method statements, and RFIs related to structural works • Ensure compliance with Dubai Municipality requirements, UAE regulations, and international engineering codes • Assist with structural risk assessments and implement corrective actions where required 4. Value Engineering & Optimization • Support value engineering initiatives and recommend practical structural solutions to improve project efficiency and cost effectiveness • Provide recommendations for construction methodologies and technical enhancements where applicable 5. Coordination & Reporting • Participate in project meetings with stakeholders and consultants • Provide regular technical reports and project updates to management • Coordinate effectively with project teams to ensure timely issue resolution and project continuity</p><p>• Bachelor’s Degree in Civil Engineering, Structural Engineering, or related field • Minimum 5–10 years of experience in structural engineering within high-rise building construction projects • Strong experience in reinforced concrete, steel structures, and tower developments (G+12 and above) • UAE project experience is highly preferred • Strong understanding of structural analysis, engineering principles, and construction methodologies • Familiarity with Dubai Municipality regulations, UAE building codes, and international standards • Proficiency in ETABS, SAFE, STAAD Pro, AutoCAD, and Revit is highly preferred • DM Certified Engineer (Unlimited Floors) is highly preferred or considered an advantage • Emaar project experience is preferred • Arabic speakers are preferred</p>

<p>KOTRA Dubai helps UAE-based Korean clients for recruitment. KOTRA Dubai DOESN'T ACCEPT TELEPHONE INQUIRIES. KOTRA Dubai has NO RESPONSIBILITY for the contract between the company below and the applicants. Company Name: SoluM MEA FZCO Company Location: BCA1 416, Dubai CommerCity, 11, 17th Street, Umm Ramool Dubai, UAE Company Introduction: SOLUM, a spin-off from Samsung Electro-Mechanics in 2015, builds on over 50 years of technological heritage to lead the global market inelectronic components and smart solutions. Originally focused on power modules, tuners, and ESLs, SOLUM is evolving from a product-centric to a solution- and platform-driven business, delivering integrated systems that enhance operational efficiency, reduce energy consumption, and increase customer revenue. With continued investment in eco-friendly energy, healthcare, and digital innovation—including ESL, power, and signage solutions—SOLUM is committed to its vision of becoming the Global No.1 Solution Provider, shaping a smarter and more sustainable future through technology. Job Description: Application Engineer Key Responsibilities: • Provide production support, troubleshooting, and maintenance, ensuring seamless operations. • Resolve issues promptly by following Standard Operating Procedures. • Handle mission-critical tasks within the production environment. • Collaborate with L3 engineering teams to address incidents and defects effectively. • Develop and maintain SQL and script monitors to enhance monitoring capabilities. • Conduct root cause analysis for defects reported by partners and customers. • Offer application support in both SaaS (Software as a Service) and On-Premise environments. • Available to work during nights and weekends to ensure continuous support and service availability.</p><p>• Language: [Required] English, Arabic / [Preferred] Korean • Bachelor's degree, preferably Computer Science degree, and minimum 3 years prior experience in a Production Support role. • Experience with Windows and Linux Administration • Experience with Unix commands and basic scripting (Shell, Python). • TCP/IP Network troubleshooting and support, including DNS, DHCP & HTTP protocols. • Taking thread dumps, analyzing them for potential issues • Microsoft Azure or Google Cloud Platform experience • Understanding of cloud computing concepts and technologies • Strong knowledge on SQL/NoSQL (writing query, Joins, View, query explain etc) - Execute, debug and test SQL programs • Knowledge on Grafana, Kibana or any equivalent Monitoring tool (AppD, Splunk) • Strong knowledge on Tomcat stack (Apache, https, SSL ) • Good working experience with Java, Microservices. • Familiarity with the Docker/Kubernetes container for microservice implementation • Knowledge of Git, RPM, Rancher , docker hub • Previous experience in a customer facing role, including excellent written and oral communications skill Working Conditions: - Expected Date of Recruitment: ASAP(Negotiable) - Salary: Salary depending on experience and skills - Term of the Contract: 2 years (can be extended) - Working Hours: 5 Days (8 hours a day) - Annual leaves: as per UAE Labor law - Severance payment: as per UAE Labor law - Insurance: Support - Visa: Support - Flight fee to home country: Not Support - Accompanying Family: Support(insurance for the accompanying family) - Support for telecommunications expenses, business trip expenses, etc</p>

<p>KOTRA Dubai helps UAE-based Korean clients for recruitment. KOTRA Dubai DOESN'T ACCEPT TELEPHONE INQUIRIES. KOTRA Dubai has NO RESPONSIBILITY for the contract between the company below and the applicants. Company Name: SoluM MEA FZCO Company Location: BCA1 416, Dubai CommerCity, 11, 17th Street, Umm Ramool Dubai, UAE Company Introduction: SOLUM, a spin-off from Samsung Electro-Mechanics in 2015, builds on over 50 years of technological heritage to lead the global market inelectronic components and smart solutions. Originally focused on power modules, tuners, and ESLs, SOLUM is evolving from a product-centric to a solution- and platform-driven business, delivering integrated systems that enhance operational efficiency, reduce energy consumption, and increase customer revenue. With continued investment in eco-friendly energy, healthcare, and digital innovation—including ESL, power, and signage solutions—SOLUM is committed to its vision of becoming the Global No.1 Solution Provider, shaping a smarter and more sustainable future through technology. Job Description: Application Engineer Key Responsibilities: • Provide production support, troubleshooting, and maintenance, ensuring seamless operations. • Resolve issues promptly by following Standard Operating Procedures. • Handle mission-critical tasks within the production environment. • Collaborate with L3 engineering teams to address incidents and defects effectively. • Develop and maintain SQL and script monitors to enhance monitoring capabilities. • Conduct root cause analysis for defects reported by partners and customers. • Offer application support in both SaaS (Software as a Service) and On-Premise environments. • Available to work during nights and weekends to ensure continuous support and service availability.</p><p>• Language: [Required] English, Arabic / [Preferred] Korean • Bachelor's degree, preferably Computer Science degree, and minimum 3 years prior experience in a Production Support role. • Experience with Windows and Linux Administration • Experience with Unix commands and basic scripting (Shell, Python). • TCP/IP Network troubleshooting and support, including DNS, DHCP & HTTP protocols. • Taking thread dumps, analyzing them for potential issues • Microsoft Azure or Google Cloud Platform experience • Understanding of cloud computing concepts and technologies • Strong knowledge on SQL/NoSQL (writing query, Joins, View, query explain etc) - Execute, debug and test SQL programs • Knowledge on Grafana, Kibana or any equivalent Monitoring tool (AppD, Splunk) • Strong knowledge on Tomcat stack (Apache, https, SSL ) • Good working experience with Java, Microservices. • Familiarity with the Docker/Kubernetes container for microservice implementation • Knowledge of Git, RPM, Rancher , docker hub • Previous experience in a customer facing role, including excellent written and oral communications skill Working Conditions: - Expected Date of Recruitment: ASAP(Negotiable) - Salary: Salary depending on experience and skills - Term of the Contract: 2 years (can be extended) - Working Hours: 5 Days (8 hours a day) - Annual leaves: as per UAE Labor law - Severance payment: as per UAE Labor law - Insurance: Support - Visa: Support - Flight fee to home country: Not Support - Accompanying Family: Support(insurance for the accompanying family) - Support for telecommunications expenses, business trip expenses, etc</p>

<p>PowerChina HDEC is seeking a detail-oriented and experienced Process Engineer to join our Dubai office, supporting large-scale EPC sewage water treatment projects. Relocation to Dubai, UAE residency visa and medical insurance will be provided to successful candidates. Main responsibilities include, but are not limited to: • Participate in pre-bid meetings, site inspections, and client consultations to capture critical project data, design constraints, and effluent quality and reuse requirements. • Review tender documents, guide/ prepare RFIs and technical clarifications, and conduct risk assessments to identify execution challenges and define mitigation strategies across bid and project stages. • Guide/ Develop and maintain PFDs and P&IDs with precise mass and energy balances and control descriptions across all treatment stages — including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Guide/ Develop and refine Process Flow Diagrams (PFDs) and Piping and Instrumentation Diagrams (P&IDs), ensuring precise mass and energy balances, control description across all treatment stages—including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Size and specify process equipment for primary, secondary, and tertiary treatment phases, sludge dewatering, and biogas handling systems — including power and chemical consumption estimation to meet discharge and reuse standards. • Ensure all process designs comply with international best practices and local authority standards (HI, ASME, AWWA, ISO, IFC, DEWA, ADDC, SEC), including hazardous area, safety, and emissions regulations. • Supporting/ leading Evaluation of vendor proposals, technical drawings, and equipment specifications — providing process inputs for layout, general arrangement drawings, and recommendations to Procurement and Project Management teams. • Collaborate with engineering, project management, commissioning, and supply chain teams; participate in HAZID/HAZOP reviews and incorporate all safety recommendations into the design.</p><p>• Bachelor's or Master's Degree in Chemical / Environmental Engineering (or equivalent) • Minimum of 10 years of relevant engineering execution experience. • Experience delivering studies, feasibility, concept designs and detail design in waste water treatment solutions in the municipal sector or industrial sector, such as primary treatments, secondary treatments, tertiary treatments (filtration, clarification, chemical dosing, P removal, ASP, MBBR, MBR, and other advanced biological treatments). • The ability to prepare and/or review comprehensive process design package deliverables, including technical specifications, design calculations, engineering reports, equipment datasheets, process control philosophies, P&IDs, mass balance diagrams, and related documentation. • Expertise in process design software (such as GPS-X, BioWin) to simulate biological nutrient removal (BNR) and plant performance under varying load conditions for optimisation. • Proven expertise in developing and reviewing the comprehensive Hydraulic Grade Lines (HGL) to ensure seamless gravity-driven flow across primary, secondary, and tertiary treatment stages, with a focus on optimising the energy consumption & CAPEX. • Ability to travel and visit operational works and construction sites as required, and to assess existing and new process performance. • Strong project integration skills, including cost estimation, vendor evaluation, and stakeholder coordination, with the ability to communicate complex technical issues clearly and resolve challenges decisively under project pressure. • Ability to prepare and evaluate technical proposals, RFPs, BOQs, specifications, and tender documents for electrical and instrumentation systems. • Excellent technical writing and documentation skills for preparing engineering reports, compliance statements, and design justifications. • Experience in AutoCAD, reviewing on 3D tool, MS Office applications (or equivalent) such as Word, Excel, and PowerPoint.</p>

<p>PowerChina HDEC is seeking a detail-oriented and experienced Process Engineer to join our Dubai office, supporting large-scale EPC sewage water treatment projects. Relocation to Dubai, UAE residency visa and medical insurance will be provided to successful candidates. Main responsibilities include, but are not limited to: • Participate in pre-bid meetings, site inspections, and client consultations to capture critical project data, design constraints, and effluent quality and reuse requirements. • Review tender documents, guide/ prepare RFIs and technical clarifications, and conduct risk assessments to identify execution challenges and define mitigation strategies across bid and project stages. • Guide/ Develop and maintain PFDs and P&IDs with precise mass and energy balances and control descriptions across all treatment stages — including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Guide/ Develop and refine Process Flow Diagrams (PFDs) and Piping and Instrumentation Diagrams (P&IDs), ensuring precise mass and energy balances, control description across all treatment stages—including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Size and specify process equipment for primary, secondary, and tertiary treatment phases, sludge dewatering, and biogas handling systems — including power and chemical consumption estimation to meet discharge and reuse standards. • Ensure all process designs comply with international best practices and local authority standards (HI, ASME, AWWA, ISO, IFC, DEWA, ADDC, SEC), including hazardous area, safety, and emissions regulations. • Supporting/ leading Evaluation of vendor proposals, technical drawings, and equipment specifications — providing process inputs for layout, general arrangement drawings, and recommendations to Procurement and Project Management teams. • Collaborate with engineering, project management, commissioning, and supply chain teams; participate in HAZID/HAZOP reviews and incorporate all safety recommendations into the design.</p><p>• Bachelor's or Master's Degree in Chemical / Environmental Engineering (or equivalent) • Minimum of 10 years of relevant engineering execution experience. • Experience delivering studies, feasibility, concept designs and detail design in waste water treatment solutions in the municipal sector or industrial sector, such as primary treatments, secondary treatments, tertiary treatments (filtration, clarification, chemical dosing, P removal, ASP, MBBR, MBR, and other advanced biological treatments). • The ability to prepare and/or review comprehensive process design package deliverables, including technical specifications, design calculations, engineering reports, equipment datasheets, process control philosophies, P&IDs, mass balance diagrams, and related documentation. • Expertise in process design software (such as GPS-X, BioWin) to simulate biological nutrient removal (BNR) and plant performance under varying load conditions for optimisation. • Proven expertise in developing and reviewing the comprehensive Hydraulic Grade Lines (HGL) to ensure seamless gravity-driven flow across primary, secondary, and tertiary treatment stages, with a focus on optimising the energy consumption & CAPEX. • Ability to travel and visit operational works and construction sites as required, and to assess existing and new process performance. • Strong project integration skills, including cost estimation, vendor evaluation, and stakeholder coordination, with the ability to communicate complex technical issues clearly and resolve challenges decisively under project pressure. • Ability to prepare and evaluate technical proposals, RFPs, BOQs, specifications, and tender documents for electrical and instrumentation systems. • Excellent technical writing and documentation skills for preparing engineering reports, compliance statements, and design justifications. • Experience in AutoCAD, reviewing on 3D tool, MS Office applications (or equivalent) such as Word, Excel, and PowerPoint.</p>

<p>We are seeking a skilled Mechanical Engineer to join our dynamic construction team in Dubai. The ideal candidate will play a key role in designing, developing, and overseeing mechanical systems to ensure the successful completion of our construction projects. This position offers the opportunity to work in a fast-paced environment where innovation and precision are highly valued. Responsibilities: - Design, develop, and supervise mechanical systems and components for construction projects. - Collaborate with architects, civil engineers, and other stakeholders to ensure integrated and efficient project completion. - Conduct site inspections and surveys to monitor mechanical installations and ensure compliance with safety and quality standards. - Prepare technical drawings, specifications, and project reports. - Perform calculations and simulations to validate system designs and performance. - Identify and resolve mechanical issues promptly to avoid delays and cost overruns. - Stay updated on industry best practices, materials, and technologies relevant to mechanical engineering in construction.</p><p>- Bachelor's degree in Mechanical Engineering or related field. - Proven experience in mechanical engineering within the construction industry. - Strong understanding of mechanical systems, HVAC, plumbing, and fire protection. - Proficiency in computer-aided design (CAD) software and other engineering tools. - Excellent problem-solving and analytical skills. - Ability to work collaboratively within multidisciplinary teams. - Strong communication and interpersonal skills. - Familiarity with local building codes, regulations, and safety standards. - Willingness to work on-site in Dubai and manage multiple projects effectively.</p>

<p>We are seeking a skilled Mechanical Engineer to join our dynamic construction team in Dubai. The ideal candidate will play a key role in designing, developing, and overseeing mechanical systems to ensure the successful completion of our construction projects. This position offers the opportunity to work in a fast-paced environment where innovation and precision are highly valued. Responsibilities: - Design, develop, and supervise mechanical systems and components for construction projects. - Collaborate with architects, civil engineers, and other stakeholders to ensure integrated and efficient project completion. - Conduct site inspections and surveys to monitor mechanical installations and ensure compliance with safety and quality standards. - Prepare technical drawings, specifications, and project reports. - Perform calculations and simulations to validate system designs and performance. - Identify and resolve mechanical issues promptly to avoid delays and cost overruns. - Stay updated on industry best practices, materials, and technologies relevant to mechanical engineering in construction.</p><p>- Bachelor's degree in Mechanical Engineering or related field. - Proven experience in mechanical engineering within the construction industry. - Strong understanding of mechanical systems, HVAC, plumbing, and fire protection. - Proficiency in computer-aided design (CAD) software and other engineering tools. - Excellent problem-solving and analytical skills. - Ability to work collaboratively within multidisciplinary teams. - Strong communication and interpersonal skills. - Familiarity with local building codes, regulations, and safety standards. - Willingness to work on-site in Dubai and manage multiple projects effectively.</p>

<p>We are seeking a skilled Electrical Engineer to join our dynamic construction team in Dubai, UAE. The ideal candidate will play a pivotal role in designing, developing, and overseeing electrical systems in our construction projects, ensuring safety, efficiency, and compliance with industry standards. Responsibilities: - Design and develop electrical systems and components for construction projects. - Conduct site inspections and ensure electrical installations comply with design specifications and safety standards. - Collaborate with architects, project managers, and other engineers to integrate electrical designs with overall construction plans. - Prepare and review electrical drawings, specifications, and documentation. - Troubleshoot electrical issues and provide effective solutions during construction phases. - Ensure compliance with UAE electrical codes, regulations, and safety standards. - Manage procurement and selection of electrical materials and equipment. - Coordinate with contractors and supervise electrical work on-site to meet project timelines and quality standards.</p><p>- Bachelor’s degree in Electrical Engineering or related field. - Proven experience in electrical engineering within the construction industry. - Strong knowledge of electrical systems, codes, and safety regulations relevant to the UAE. - Proficiency in electrical design software such as AutoCAD and ETAP. - Excellent problem-solving and analytical skills. - Strong communication and teamwork abilities. - Ability to work in a fast-paced, deadline-driven environment. - Fluency in English; knowledge of Arabic is a plus. - Detail-oriented with a commitment to quality and safety.</p>

<p>We are seeking a skilled Electrical Engineer to join our dynamic construction team in Dubai, UAE. The ideal candidate will play a pivotal role in designing, developing, and overseeing electrical systems in our construction projects, ensuring safety, efficiency, and compliance with industry standards. Responsibilities: - Design and develop electrical systems and components for construction projects. - Conduct site inspections and ensure electrical installations comply with design specifications and safety standards. - Collaborate with architects, project managers, and other engineers to integrate electrical designs with overall construction plans. - Prepare and review electrical drawings, specifications, and documentation. - Troubleshoot electrical issues and provide effective solutions during construction phases. - Ensure compliance with UAE electrical codes, regulations, and safety standards. - Manage procurement and selection of electrical materials and equipment. - Coordinate with contractors and supervise electrical work on-site to meet project timelines and quality standards.</p><p>- Bachelor’s degree in Electrical Engineering or related field. - Proven experience in electrical engineering within the construction industry. - Strong knowledge of electrical systems, codes, and safety regulations relevant to the UAE. - Proficiency in electrical design software such as AutoCAD and ETAP. - Excellent problem-solving and analytical skills. - Strong communication and teamwork abilities. - Ability to work in a fast-paced, deadline-driven environment. - Fluency in English; knowledge of Arabic is a plus. - Detail-oriented with a commitment to quality and safety.</p>

<p>• Support the Project Department in the execution and completion of ongoing and upcoming projects. • Perform installation, commissioning, testing, and maintenance of electrical and air conditioning (HVAC) systems. • Install, maintain, troubleshoot, commission, and test electrical, HVAC, and telecommunication systems. • Carry out installation, repair, and preventive maintenance of electrical systems within equipment shelters. • Execute installation of electrical, earthing, and lightning protection systems for Greenfield tower, monopole, and rooftop telecommunication sites. • Diagnose electrical faults and implement effective corrective actions to ensure system reliability. • Ensure all work is performed in compliance with project specifications, quality standards, and HSE requirements. • Prepare site reports and maintain accurate documentation of installation and maintenance activities. • Perform other related duties as assigned by the Senior Project Engineer.</p><p>• Bachelor's Degree in Electrical Engineering. • 3–4 years of relevant experience in electrical engineering, preferably in telecommunications, infrastructure, or MEP projects. • Strong knowledge of electrical systems, air conditioning (HVAC), and telecommunications infrastructure. • Ability to read and interpret electrical drawings and technical documentation. • Good troubleshooting, communication, and teamwork skills. • A UAE driving license is an advantage.</p>

<p>• Support the Project Department in the execution and completion of ongoing and upcoming projects. • Perform installation, commissioning, testing, and maintenance of electrical and air conditioning (HVAC) systems. • Install, maintain, troubleshoot, commission, and test electrical, HVAC, and telecommunication systems. • Carry out installation, repair, and preventive maintenance of electrical systems within equipment shelters. • Execute installation of electrical, earthing, and lightning protection systems for Greenfield tower, monopole, and rooftop telecommunication sites. • Diagnose electrical faults and implement effective corrective actions to ensure system reliability. • Ensure all work is performed in compliance with project specifications, quality standards, and HSE requirements. • Prepare site reports and maintain accurate documentation of installation and maintenance activities. • Perform other related duties as assigned by the Senior Project Engineer.</p><p>• Bachelor's Degree in Electrical Engineering. • 3–4 years of relevant experience in electrical engineering, preferably in telecommunications, infrastructure, or MEP projects. • Strong knowledge of electrical systems, air conditioning (HVAC), and telecommunications infrastructure. • Ability to read and interpret electrical drawings and technical documentation. • Good troubleshooting, communication, and teamwork skills. • A UAE driving license is an advantage.</p>

<p>1. Responsible for the full-cycle document management of the procurement process in EPC projects, including receipt, registration, numbering, distribution, archiving, and controlled management of all procurement documents, ensuring completeness, accuracy, and traceability. 2. Establish and maintain procurement document registers/trackers, including but not limited to: • Material Requisition MR • Request for Quotation RFQ • Invitation to Bid ITB • Technical / Commercial Bid Evaluation • Purchase Order PO • Vendor Document Register VDR • Vendor Data Requirement List VDRL • Inspection Documents • Shipping Documents • Final Vendor Dossier 3. Manage the full life cycle of vendor documentation, including receipt, review, distribution, expediting, and archiving of vendor-supplied drawings, technical specifications, data sheets, inspection records, quality certificates, manufacturing records, operation and maintenance manuals, and other related materials. 4. Track the submission status of vendor documents, update the Vendor Document Register (VDR) in a timely manner, and coordinate with procurement, engineering, quality, inspection, logistics, and other relevant departments to complete document review and approval processes in accordance with project schedules. 5. Prepare and manage Document Transmitals, ensuring that all internal and external document transmissions are timely, accurate, and properly controlled. 6. Implement and maintain procurement document revision control, ensuring that all stakeholders are working with the latest approved versions, thereby mitigating procurement and execution risks caused by version discrepancies. 7. Establish and maintain procurement document control trackers and statistical reports, covering document status, vendor submission rates, overdue document statistics, approval progress, etc., to provide data-driven support for project management. 8. Organize and manage procurement file archiving and project handover documentation, including the compilation, organization, and transfer of procurement records, Final Vendor Dossiers, Manufacturing Record Books (MRB), and other deliverable documentation for project close-out. 9. Upload, maintain, and update procurement-related documents in the Electronic Document Management System (EDMS), ensuring data integrity and completeness. 10. Support the Procurement Manager and project team in procurement audits, quality system audits, and project completion documentation reviews as required. 11. Perform other procurement document control duties as assigned by the department.</p><p>1. Bachelor’s degree or above, preferably in Archives Management, Engineering Management, Logistics Management, International Trade, Mechanical Engineering, Materials Engineering, Petroleum Engineering, or related disciplines. 2. Work Experience: 2.1. At least 3 years of experience in document control or procurement document control for EPC engineering projects. 2.2 Experience in EPC projects within the oil & gas, refining & petrochemical, chemical, power, LNG, or offshore engineering sectors is preferred. 2.3 Experience in overseas EPC projects or international engineering projects is preferred. 2.4 Familiar with vendor document management and full-cycle procurement documentation processes. 3. Professional Competencies: 3.1 Familiar with EPC project procurement management workflows and vendor documentation requirements. 3.2 Familiar with procurement document coding systems, document control procedures, and archival management standards. 3.3 Familiar with Vendor Data management processes, including VDR, VDRL, MRB, Final Vendor Dossier, and related documentation. 3.4 Understanding of the interface and interrelationship among procurement documents, quality documents, inspection documents, and logistics documents. 4. Language Proficiency: Good English reading and writing skills, with the ability to read procurement contracts, technical documents, and vendor materials, and to draft emails, Document Transmitals, and various procurement document control trackers in English. 5. Core Competencies: 5.1 Meticulous, detail-oriented, with strong sense of responsibility, document management awareness, and confidentiality. 5.2 Excellent communication and coordination skills, capable of effective collaboration with procurement, engineering, quality, inspection, logistics, and vendors. 5.3 Strong execution, planning, and time management skills, with the ability to meet project milestone deadlines. 5.4 Able to work under pressure and manage multiple projects and multiple vendors' documentation simultaneously.</p>

<p>1. Responsible for the full-cycle document management of the procurement process in EPC projects, including receipt, registration, numbering, distribution, archiving, and controlled management of all procurement documents, ensuring completeness, accuracy, and traceability. 2. Establish and maintain procurement document registers/trackers, including but not limited to: • Material Requisition MR • Request for Quotation RFQ • Invitation to Bid ITB • Technical / Commercial Bid Evaluation • Purchase Order PO • Vendor Document Register VDR • Vendor Data Requirement List VDRL • Inspection Documents • Shipping Documents • Final Vendor Dossier 3. Manage the full life cycle of vendor documentation, including receipt, review, distribution, expediting, and archiving of vendor-supplied drawings, technical specifications, data sheets, inspection records, quality certificates, manufacturing records, operation and maintenance manuals, and other related materials. 4. Track the submission status of vendor documents, update the Vendor Document Register (VDR) in a timely manner, and coordinate with procurement, engineering, quality, inspection, logistics, and other relevant departments to complete document review and approval processes in accordance with project schedules. 5. Prepare and manage Document Transmitals, ensuring that all internal and external document transmissions are timely, accurate, and properly controlled. 6. Implement and maintain procurement document revision control, ensuring that all stakeholders are working with the latest approved versions, thereby mitigating procurement and execution risks caused by version discrepancies. 7. Establish and maintain procurement document control trackers and statistical reports, covering document status, vendor submission rates, overdue document statistics, approval progress, etc., to provide data-driven support for project management. 8. Organize and manage procurement file archiving and project handover documentation, including the compilation, organization, and transfer of procurement records, Final Vendor Dossiers, Manufacturing Record Books (MRB), and other deliverable documentation for project close-out. 9. Upload, maintain, and update procurement-related documents in the Electronic Document Management System (EDMS), ensuring data integrity and completeness. 10. Support the Procurement Manager and project team in procurement audits, quality system audits, and project completion documentation reviews as required. 11. Perform other procurement document control duties as assigned by the department.</p><p>1. Bachelor’s degree or above, preferably in Archives Management, Engineering Management, Logistics Management, International Trade, Mechanical Engineering, Materials Engineering, Petroleum Engineering, or related disciplines. 2. Work Experience: 2.1. At least 3 years of experience in document control or procurement document control for EPC engineering projects. 2.2 Experience in EPC projects within the oil & gas, refining & petrochemical, chemical, power, LNG, or offshore engineering sectors is preferred. 2.3 Experience in overseas EPC projects or international engineering projects is preferred. 2.4 Familiar with vendor document management and full-cycle procurement documentation processes. 3. Professional Competencies: 3.1 Familiar with EPC project procurement management workflows and vendor documentation requirements. 3.2 Familiar with procurement document coding systems, document control procedures, and archival management standards. 3.3 Familiar with Vendor Data management processes, including VDR, VDRL, MRB, Final Vendor Dossier, and related documentation. 3.4 Understanding of the interface and interrelationship among procurement documents, quality documents, inspection documents, and logistics documents. 4. Language Proficiency: Good English reading and writing skills, with the ability to read procurement contracts, technical documents, and vendor materials, and to draft emails, Document Transmitals, and various procurement document control trackers in English. 5. Core Competencies: 5.1 Meticulous, detail-oriented, with strong sense of responsibility, document management awareness, and confidentiality. 5.2 Excellent communication and coordination skills, capable of effective collaboration with procurement, engineering, quality, inspection, logistics, and vendors. 5.3 Strong execution, planning, and time management skills, with the ability to meet project milestone deadlines. 5.4 Able to work under pressure and manage multiple projects and multiple vendors' documentation simultaneously.</p>

<p>ADNOC Offshore project for a duration of 6-8 months, QC Engineer in the Oil & Gas Projects, Previous ADNOC experience, ASNT Level II in RT, UT, MT, and PT.</p><p><strong>Desired Candidate Profile</strong></p><p>CSWIP 3.1 or AWS-CWI or another acceptable equivalent (approved by COMPANY)</p>

<ul><li>Oversee the planning, execution, and completion of civil maintenance projects, ensuring adherence to schedules and budgets.</li><li>Conduct regular inspections of infrastructure, identifying potential issues and proactively implementing preventative maintenance strategies.</li><li>Manage and coordinate a team of technicians and contractors, providing technical guidance and performance oversight.</li><li>Develop and maintain detailed maintenance records, including work orders, inspection reports, and asset history.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Expatriates: Diploma/Bachelors in Civil Engineering (Minimum 6 years experience)</p></li><li><p>Experience in civil maintenance of buildings with a reputed construction/maintenance firm.</p></li><li><p>Shall execute preventive/corrective civil maintenance tasks of buildings preferably transmission substations with adequate safety.</p></li><li><p>Shall have thorough knowledge of Civil maintenance of buildings including their design, specification and maintenance.</p></li><li><p><strong>UAE driving license holder mandatory</strong> with adequate computer proficiency preferably in SAP.</p></li></ul>

<ul><li><p>Civil Construction Engineer </p></li></ul><p>Responsible for the construction management and technical coordination of civil works for villa construction projects.</p><p>Prepare and review construction plans, method statements, shop drawings and other technical documents.</p><p>Coordinate with consultants, subcontractors and other project departments to ensure smooth construction progress.</p><p>Monitor construction quality, progress and compliance with approved drawings and specifications.</p><p>Review quantities, coordinate material requirements and support the preparation of construction records and reports.</p><p>Identify construction issues and coordinate solutions in a timely manner.</p><p>Ensure compliance with UAE construction regulations, project requirements and company procedures.</p><br><p>Civil Foreman</p><ul><li><p>Supervise and coordinate daily civil construction activities on site.</p></li><li><p> Organize workers and subcontractors to carry out construction according to drawings and construction schedules. </p></li><li><p>Supervise concrete works, blockwork, plastering, waterproofing, tiling and other civil works. </p></li><li><p>Monitor workmanship and ensure construction quality meets project requirements. </p></li><li><p> Coordinate manpower, materials, tools and equipment required for daily construction activities. </p></li><li><p> Report daily construction progress and site issues to the project management team. </p></li><li><p>Ensure safe working practices and maintain good housekeeping on site. </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree or diploma in Civil Engineering, Construction Engineering or a related field. </p></li><li><p>3–8 years of relevant experience in civil construction, preferably in villa or residential projects in the UAE or GCC region. </p></li><li><p>Candidates with strong site experience may be considered for the Civil Foreman position. </p></li><li><p>Candidates with an engineering degree and strong technical and site management capabilities may be considered for the Civil Construction Engineer position. </p></li><li><p>Familiar with civil construction methods, drawings, specifications and quality requirements. Experience in villa construction, residential projects or building construction is preferred. </p></li><li><p>Good communication, coordination and problem-solving skills. </p></li><li><p>Ability to work independently and effectively manage site activities. </p></li><li><p>Knowledge of UAE construction standards and regulations is an advantage. </p></li></ul>

<ul><li><p>Substation installation and maintenance</p></li><li><p>Coordination with other department’s site team for site execution</p></li><li><p>Coordination with Consultant Inspector for Material and Work inspection</p></li><li><p>Site execution as per Project plan</p></li><li><p>Team supervision and manpower management</p></li><li><p>Reading SLDs and Electrical drawings</p></li><li><p>Experience in Industrial and Plant projects</p></li><li><p>Transformer and Electrical panels installation – MV & LV</p></li><li><p>Cable laying, Glanding and Termination – MV & LV</p></li><li><p>Cable Containment system</p></li><li><p>Fault identification and Trouble shooting</p></li><li><p>Monitor work progress, manpower productivity and material usage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Substation installation and maintenance</p></li><li><p>Coordination with other department’s site team for site execution</p></li><li><p>Coordination with Consultant Inspector for Material and Work inspection</p></li><li><p>Site execution as per Project plan</p></li><li><p>Team supervision and manpower management</p></li><li><p>Reading SLDs and Electrical drawings</p></li><li><p>Experience in Industrial and Plant projects</p></li><li><p>Transformer and Electrical panels installation – MV & LV</p></li><li><p>Cable laying, Glanding and Termination – MV & LV</p></li><li><p>Cable Containment system</p></li><li><p>Fault identification and Trouble shooting</p></li><li><p>Monitor work progress, manpower productivity and material usage</p></li></ul><br>

<p><strong>About KingoMart</strong></p><br><p>KingoMart is a B2B e-commerce marketplace connecting suppliers and business buyers. Our platform today consists of a customer storefront (Next.js + React + TypeScript), an internal admin panel (React + TypeScript), and a FastAPI + PostgreSQL backend that publishes a typed OpenAPI contract. Everything user-facing is TypeScript, and mobile will be too.</p><br><p><strong>The role</strong></p><br><p>You will be our first and founding mobile engineer. You own the mobile architecture end to end: you will build and ship our customer storefront app for Android and iOS (React Native + Expo, TypeScript), and later a second app for our suppliers. The monorepo, typed API client, and build-service decisions (Expo EAS) are already in place you take them from skeleton to shipped product, and you own every release that follows.</p><br><p>This is a high-ownership role: you set the technical standards, the release process, and the quality bar that the whole mobile codebase will live with for years.</p><br><p><strong>What you will do</strong></p><br><ul><li><p><strong>Build and ship the KingoMart storefront app</strong> (catalog, search, cart, checkout, orders, account) to both the App Store and Google Play.</p></li><li><p>Own the mobile architecture: navigation, state management, offline/caching strategy, deep linking, and push notifications documented in ADRs.</p></li><li><p>Own release engineering: EAS builds, store submissions, staged rollouts, over-the-air updates, crash monitoring, and rollback strategy.</p></li><li><p>Integrate with our FastAPI backend through the shared OpenAPI-generated TypeScript client.</p></li><li><p>Establish testing practices (unit, component, and end-to-end) and the CI checks that enforce them.</p></li><li><p>Later: build the supplier-panel app on the foundations you laid shared design system, auth, and API layer.</p></li><li><p>Work alongside our web engineers (React/TypeScript); code review flows both ways.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Experience - </strong>5+ years of software engineering, with 3+ years of React Native in production and strong TypeScript.</p></li><li><p><strong>Shipped and maintained - </strong>at least two apps live in both the App Store and Play Store maintained through OS releases, store policy changes, and at least one major React Native upgrade or architecture migration.</p></li><li><p><strong>Expo ecosystem - </strong>EAS Build / Submit / Update, config plugins, development builds, Continuous Native Generation.</p></li><li><p><strong>Native literacy - </strong>able to read and write basic Swift and Kotlin - enough to debug a native crash, write a config plugin, or wrap a native SDK.</p></li><li><p><strong>Navigation & deep linking - </strong>Expo Router or React Navigation; universal links / app links; push-notification routing.</p></li><li><p><strong>State & data - </strong>clear judgment on server state vs client state (e.g. TanStack Query + a light client store), and cart/checkout state design.</p></li><li><p><strong>Offline & caching - </strong>cache-first browsing, optimistic updates with rollback, queued mutations with sync and conflict handling.</p></li><li><p><strong>Push notifications - </strong>FCM + APNs end to end: permission UX, token lifecycle, payload design, all three app states.</p></li><li><p><strong>Performance - </strong>list virtualization, image pipelines, Hermes profiling, startup time, and re-render analysis on real devices.</p></li><li><p><strong>Testing - </strong>Jest + React Native Testing Library; E2E with Maestro or Detox; a coherent view of what to test at which layer.</p></li><li><p><strong>Release engineering - </strong>staged rollouts, OTA update policy and its store-policy boundaries, versioning, crash monitoring (Sentry or similar).</p></li><li><p><strong>Security - </strong>Keychain/Keystore for tokens (never AsyncStorage), secure deep-link handling, store privacy declarations.</p></li></ul><br><p><strong>Nice to have</strong></p><br><ul><li><p>AI experience - Familiarity with AI-powered applications, LLM APIs (e.g. OpenAI), AI-assisted features such as chat, recommendations, semantic search, and prompt engineering. Experience integrating AI services into mobile applications is a strong advantage.</p></li><li><p>E-commerce or B2B app experience; payment SDK integration (Stripe, Adyen, or similar).</p></li><li><p>Monorepo experience (Turborepo/Nx or pnpm workspaces) sharing code with React web apps.</p></li><li><p>Comfortable occasionally contributing to our React web codebases (Next.js storefront, Vite admin).</p></li><li><p>Analytics and experimentation in mobile release cadences; App Store / Play Store review battle scars.</p></li><li><p>Accessibility (VoiceOver/TalkBack), i18n/RTL (our storefront ships English, French, and Arabic).</p></li><li><p>Able to read Python well enough to follow a FastAPI endpoint.</p></li><li><p>React Native New Architecture migration experience.</p><br></li></ul><p><strong>Our stack (context, not requirements)</strong></p><br><ul><li><p><strong>Storefront web: </strong>Next.js 16, React 19, TanStack Query, Tailwind, next-intl.</p></li><li><p><strong>Admin panel: </strong>Vite + React + TypeScript, shadcn/ui.</p></li><li><p><strong>Backend: </strong>FastAPI + PostgreSQL; OpenAPI contract with generated TypeScript clients.</p></li><li><p><strong>Mobile (yours): </strong>Expo SDK 57+, Expo Router, pnpm + Turborepo monorepo, EAS.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervision &amp; Execution: Manage daily on-site finishing activities (screeding, marble/ceramic tiling, gypsum partitions, painting, joinery, and glazing) to ensure work matches approved Shop Drawings and Material Submittals.</p></li><li><p>MEP Coordination: Work closely with the MEP team to ensure all internal provisions, piping, and wiring are approved before closing walls or ceilings.</p></li><li><p>Quality Assurance &amp; Handover: Raise Inspection Requests (IRs) and coordinate with QA/QC and the Consultant for smooth site inspections. Lead mock-up approvals for critical areas.</p></li><li><p>Snagging &amp; Rectification: Conduct thorough internal snagging, manage subcontractor rectifications, and close out Consultant punch lists for a seamless final handover.</p></li><li><p>Subcontractor Management: Supervise specialized finishing subcontractors, monitoring their progress, manpower, and safety standards on site.</p></li><li><p>Material &amp; Waste Management: Track material consumption, minimize wastage, and ensure proper storage of high-value finishing materials.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Education: Bachelor’s Degree in Civil Engineering or Architectural Engineering.</p></li></ul><ul><li><p>Experience: Minimum 3 to 8 years of dedicated finishing experience on residential, commercial, or luxury hospitality projects in the UAE / GCC.</p></li><li><p>Technical Skills: Strong proficiency in reading AutoCAD drawings and deep knowledge of finishing material execution methodologies.</p></li><li><p>Local Knowledge: Solid understanding of UAE building codes, civil defense standards, and local municipality regulations.</p></li><li><p>Skills: An exceptional eye for detail, strong leadership, and the ability to work under tight handover deadlines.</p></li><li><p>Availability: Candidates immediately available in the UAE with a transferable visa will be given preference.</p></li><li><p>Preferred with UAE Driver's License</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervise fabrication, maintenance, and shutdown activities at client sites. </p></li><li><p>Coordinate with Project Engineer, Client Representatives, QA/QC, and Safety teams. </p></li><li><p>Execute work according to approved drawings, method statements, and client requirements and ensure the work is completed within the required timelines,</p></li><li><p>Monitor structural steel fabrication and installation on works. </p></li><li><p>Supervise repair and replacement of steel structures, platforms, handrails, walkways, ducts, hoppers, and equipment supports. </p></li><li><p>Plan daily manpower, tools, consumables, and equipment. </p></li><li><p>Coordinate crane, forklift , and lifting activities. </p></li><li><p>Ensure proper material identification and traceability. </p></li><li><p>Monitor fabrication on quality before client inspection. </p></li><li><p>Coordinate with QA/QC for inspections. </p></li><li><p>Ensure compliance with client Permit to Work (PTW) procedures. </p></li><li><p>Attend toolbox talks and daily coordination on meetings. </p></li><li><p>Prepare daily progress reports and manpower reports.</p></li><li><p>Identify site issues and coordinate timely resolution. </p></li><li><p>Ensure proper housekeeping and compliance with HSE regulations. </p></li><li><p>Support emergency maintenance and breakdown jobs.</p></li><li><p>Coordinate shutdown activities to minimize plant downtime. </p></li><li><p>Maintain project documentation and daily site records. </p></li><li><p>Ensure client satisfaction through quality workmanship.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering .</p></li><li><p>3-7 years of progressive experience in mechanical site supervision or engineering roles within the construction industry.</p></li><li><p>Aluminium Smelter Plant experience is preferred and an advantage.</p></li><li><p>Proven experience in managing mechanical installations for projects in sectors such as oil &amp; gas, power generation, or industrial manufacturing.</p></li><li><p>Possession of relevant professional certifications is advantageous.</p></li></ul><p></p></section>