Sound Engineering Jobs in UAE

<p>CCTV Engineer – Installation & Maintenance</p><p><strong>Requirements:</strong></p><ul><li><p><strong>Bachelor’s Degree in Engineering – Mandatory.</strong></p></li><li><p>CCTV installation, testing, commissioning, and maintenance experience.</p></li><li><p><strong>SIRA experience/knowledge – Mandatory.</strong></p></li><li><p>Experience with IP/Analog CCTV, NVR/DVR, VMS, PoE switches, and networking.</p></li><li><p>Troubleshooting and preventive/corrective maintenance skills.</p></li><li><p>Knowledge of SIRA compliance and CCTV standards in Dubai.</p></li><li><p>Good communication and problem-solving skills.</p></li><li><p>UAE experience is preferred.</p></li></ul><p>Responsibilities:</p><ul><li><p>Install, configure, test, and maintain CCTV systems.</p></li><li><p>Troubleshoot cameras, NVR/DVR, networks, and related equipment.</p></li><li><p>Ensure CCTV installations comply with SIRA requirements.</p></li><li><p>Conduct preventive maintenance and resolve system faults.</p></li><li><p>Prepare installation and maintenance reports.</p></li><li><p>Support SIRA inspections and approvals.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor’s Degree in Engineering – Mandatory</p>

<p>Work and supervise all activities related to all Rigless Operations in offshore to efficiently carry out all preparations, implementation and close-out works. Carries out a variety of duties related to the preparation and execution of programmes to meet client Management expectations. Provide feedback in job design including preparation of detailed technical specifications, execution of all planned works and support to provide feedback in establishing required contracts for all well intervention, well completions, well services, well integrity and workover related services and purchases. Be responsible for actual work at site preparations and coordinate with service contractors on technical matters for operation. Work site as a Petroleum Engineer Supervisor to conduct the Rigless Operations in a safe and efficient manner. Participate and ensure Company’s BDOMS and SOPs are in place and compliant during the Well Intervention, Well Services and Well Integrity operations.</p><p><strong>Desired Candidate Profile</strong></p><ol type="1"><li><p>Rigless Operations</p></li></ol><ul><li><p>Plan, coordinate, and supervise offshore rigless operations in accordance with approved programs, applicable standards, and Company procedures.</p><br></li></ul><ol start="2" type="1"><li><p>Well Intervention and Execution</p></li></ol><ul><li><p>Act as Well Site Petroleum Engineer for Slickline, Coiled Tubing, N2 kick-off, sealant repair, cased-hole logging, stimulation, flow-back and well testing operations</p><br></li></ul><ol start="3" type="1"><li><p>Well Services & Well Integrity:</p></li></ol><ul><li><p>Plan and supervise well maintenance, monitoring and integrity activities, ensuring well barriers are maintained in compliance with the company’s WIMS requirements.</p><br></li></ul><ol start="4" type="1"><li><p>Technical & Operational Support</p></li></ol><ul><li><p>Provide on-site technical solutions, troubleshoot operational issues, support completion/intervention/workover planning and participate in Management of Change (MOC) when required.</p><br></li></ul><ol start="5" type="1"><li><p>Equipment & Contractor Management</p></li></ol><ul><li><p>Ensure availability and suitability of required equipment, tools and personnel, coordinate and evaluate service contractors and vendors.</p><br></li></ul><ol start="6" type="1"><li><p>HSE & Compliance</p></li></ol><ul><li><p>Ensure operations comply with the company’s HSE requirements, SOPs and applicable industry standards. Conduct risk assessments, attend SIMOPS, incident investigations and hazard identification.</p><br></li></ul><ol start="7" type="1"><li><p>Mandatory Training & Certification</p></li></ol><ul><li><p>Valid T-BOSIET, H2S Awareness, WMS and IWCF Level 4 certification/training is preferable.</p><br></li></ul><ol start="8" type="1"><li><p>Experience</p></li></ol><ul><li><p>Total 16 year’s experience with a minimum of 10 years field operations experience</p></li></ul>

<ul><li>Develop and maintain detailed project schedules using advanced scheduling software to ensure timely completion.</li><li>Coordinate with multidisciplinary teams to gather project requirements and align schedules with project milestones and deliverables.</li><li>Perform critical path analysis to identify bottlenecks and recommend solutions that optimize project timelines.</li><li>Regularly update and communicate project status reports to stakeholders, ensuring transparency and accountability.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering.</p></li><li><p>Minimum of 5 years of relevant work experience in planning and scheduling within the construction/ Infrastructure.</p></li><li><p>Professional certifications such as PMP (Project Management Professional) or PMI-SP (Scheduling Professional) are highly preferred.</p></li><li><p>Proficiency in scheduling software such as Primavera P6 or MS Project, demonstrating technical competence in project management tools.</p></li></ul>

<br><p>We are looking for an experienced <strong>QA/QC Engineer</strong> to join our high-rise building construction projects. The QA/QC Engineer will be responsible for ensuring that construction activities, materials, workmanship, and completed works comply with approved drawings, project specifications, contract requirements, applicable building codes, and quality standards.</p><p>The role will cover quality assurance, quality control, material inspections, structural and architectural inspections, MEP coordination, testing, documentation, NCR management, and project handover.</p><p><strong>Key Responsibilities</strong><br>1. Quality Assurance</p><ul><li><p>Develop, implement, and maintain the <strong>Project Quality Plan (PQP)</strong>.</p></li><li><p>Prepare and maintain <strong>Inspection and Test Plans (ITPs)</strong> for project activities.</p></li><li><p>Review method statements, work procedures, and quality requirements.</p></li><li><p>Ensure compliance with project specifications, contract requirements, approved drawings, and applicable codes and standards.</p></li><li><p>Conduct internal quality audits and monitor implementation of the Quality Management System (QMS).</p></li><li><p>Conduct quality awareness and training sessions for site personnel.</p></li><li><p>Identify potential quality risks and implement preventive measures to avoid defects and rework.</p></li></ul><p>2. Quality Control & Site Inspections</p><ul><li><p>Conduct inspections before, during, and after construction activities.</p></li><li><p>Verify that all works comply with approved shop drawings, specifications, and project requirements.</p></li><li><p>Carry out stage inspections for structural, architectural, finishing, and other construction activities.</p></li><li><p>Coordinate inspections with consultants, clients, and relevant project teams.</p></li><li><p>Witness required testing activities and ensure results meet specified requirements.</p></li><li><p>Identify quality issues and ensure corrective actions are implemented.</p></li></ul><p>3. Material Inspection & Control</p><ul><li><p>Inspect incoming construction materials and verify compliance with approved material submittals.</p></li><li><p>Check manufacturer certificates, test certificates, and other required documentation.</p></li><li><p>Ensure only approved materials are used on the project.</p></li><li><p>Raise concerns and initiate rejection of non-conforming materials where required.</p></li><li><p>Inspect materials including concrete, reinforcement steel, structural steel, waterproofing materials, masonry blocks, tiles, paint, aluminum, glass, fire-rated materials, and other construction products.</p></li></ul><p>4. Structural Works Inspection</p><p>Inspect and verify the quality of:</p><ul><li><p>Excavation and foundation works</p></li><li><p>Reinforcement and formwork</p></li><li><p>Embedded items</p></li><li><p>Concrete pouring and curing</p></li><li><p>Columns, beams, slabs, and shear walls</p></li><li><p>Core walls and lift shafts</p></li><li><p>Staircases</p></li><li><p>Roof structures</p></li><li><p>Other structural elements</p></li></ul><p>5. Concrete Quality Control</p><ul><li><p>Verify approved concrete mix designs before use.</p></li><li><p>Inspect reinforcement and formwork before concrete casting.</p></li><li><p>Check formwork dimensions, levels, and alignment.</p></li><li><p>Witness concrete slump tests and cube sampling.</p></li><li><p>Monitor concrete placement, vibration, and curing.</p></li><li><p>Review laboratory test results and ensure compliance with project requirements.</p></li><li><p>Maintain complete records of concrete testing and inspection activities.</p></li></ul><p>6. Architectural & Finishing Works</p><p>Inspect and monitor the quality of:</p><ul><li><p>Blockwork</p></li><li><p>Plastering</p></li><li><p>Waterproofing</p></li><li><p>Screeding</p></li><li><p>Tiling</p></li><li><p>Marble installation</p></li><li><p>Painting</p></li><li><p>False ceilings</p></li><li><p>Doors and windows</p></li><li><p>Façade works</p></li><li><p>Roofing</p></li><li><p>Sealants</p></li><li><p>Flooring and other finishing works</p></li></ul><p>7. MEP Quality Coordination</p><p>Coordinate quality inspections for:</p><ul><li><p>Electrical conduits and embedded services</p></li><li><p>Plumbing sleeves and pipework</p></li><li><p>HVAC openings and installations</p></li><li><p>Fire protection systems</p></li><li><p>Embedded pipes</p></li><li><p>Cable trays</p></li><li><p>Builder's work requirements</p></li><li><p>MEP works prior to concrete casting and other critical construction activities</p></li></ul><p>8. Inspection Requests & Consultant Coordination</p><ul><li><p>Prepare and submit <strong>Inspection Requests (IRs)</strong> in accordance with project requirements.</p></li><li><p>Coordinate inspections with consultants and client representatives.</p></li><li><p>Address and close inspection comments within agreed timelines.</p></li><li><p>Maintain complete inspection records and supporting documentation.</p></li><li><p>Coordinate with site teams to ensure works are ready for inspection.</p></li></ul><p>9. Testing & Commissioning</p><p>Coordinate and witness required testing activities, including:</p><ul><li><p>Concrete compressive strength testing</p></li><li><p>Reinforcement testing</p></li><li><p>Waterproofing tests</p></li><li><p>Field density tests</p></li><li><p>Pull-out tests</p></li><li><p>Fire-stopping inspections</p></li><li><p>Functional testing of MEP systems</p></li><li><p>Final testing and commissioning activities</p></li></ul><p>10. NCR & Corrective Action Management</p><ul><li><p>Identify and raise <strong>Non-Conformance Reports (NCRs)</strong> for non-compliant works.</p></li><li><p>Investigate the root causes of quality issues.</p></li><li><p>Recommend corrective and preventive actions.</p></li><li><p>Coordinate with responsible teams to implement corrective actions.</p></li><li><p>Verify completion and effectiveness of corrective actions.</p></li><li><p>Close NCRs after successful verification and approval.</p></li></ul><p>11. Quality Documentation & Reporting</p><p>Maintain accurate and up-to-date quality records, including:</p><ul><li><p>Project Quality Plans</p></li><li><p>Inspection and Test Plans</p></li><li><p>Method Statements</p></li><li><p>Material Approval Requests (MARs)</p></li><li><p>Material Inspection Requests (MIRs)</p></li><li><p>Inspection Requests (IRs)</p></li><li><p>Non-Conformance Reports (NCRs)</p></li><li><p>Site Observation Reports (SORs)</p></li><li><p>Requests for Information (RFIs)</p></li><li><p>Test Reports</p></li><li><p>Calibration Certificates</p></li><li><p>Daily Inspection Reports</p></li><li><p>As-built quality records</p></li><li><p>Snag lists</p></li><li><p>Quality dossiers</p></li><li><p>Project handover documentation</p></li></ul><p>12. Coordination</p><p>Work closely with:</p><ul><li><p>Project Manager</p></li><li><p>Construction Manager</p></li><li><p>Site Engineers</p></li><li><p>Consultants</p></li><li><p>Client representatives</p></li><li><p>MEP Engineers</p></li><li><p>Surveyors</p></li><li><p>Material suppliers</p></li><li><p>Testing laboratories</p></li><li><p>Subcontractors</p></li><li><p>Safety officers</p></li></ul><p>Participate in quality meetings, coordination meetings, technical discussions, and site inspections as required.</p><p>13. Handover & Project Close-Out</p><ul><li><p>Prepare and monitor snag and punch lists.</p></li><li><p>Verify completion of corrective and outstanding works.</p></li><li><p>Conduct final quality inspections.</p></li><li><p>Compile complete quality dossiers and handover documentation.</p></li><li><p>Ensure all inspection and testing records are properly closed.</p></li><li><p>Support project completion, handover, and occupancy certification requirements where applicable.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in <strong>Civil Engineering, Construction Engineering, or a related discipline</strong>.</p></li><li><p><strong>5+ years of experience</strong> in QA/QC within the building construction industry.</p></li><li><p>Experience in <strong>high-rise building projects</strong> is highly preferred.</p></li><li><p>UAE/GCC construction experience is an advantage.</p></li><li><p>Strong experience in structural, architectural, finishing, and MEP quality coordination.</p></li><li><p>Good knowledge of construction materials, concrete technology, testing, inspection procedures, and construction methodologies.</p></li><li><p>Experience coordinating inspections with consultants and clients.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead Project Engineer to join our team in Sharjah, UAE. This is a full-time office-based role.</p><br> <br> <br> <br> <br><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Remarkable people, trusted by clients to design and advance the world.</strong></p><br><p>Wood is recruiting for a Lead Project Engineer to join our team in Sharjah, UAE. This is a full-time office-based role.</p><br><p><i><strong>#Wood #UAE #Sharjah #Project #Engineering</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Lead Project Engineer to join our Iraq Operations Business. This role is full time residential based in Sharjah, UAE</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.&nbsp;</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region&nbsp;</p><br><p><strong><u>What we can offer</u></strong></p><br><ul><li><strong>Meaningful and interesting projects</strong>&nbsp;Delivered to high profile clients and complex projects in Iraq&nbsp;</li><li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li><li><strong>Competitive salary</strong>&nbsp;with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li><li><strong>Commitment to continued professional development;</strong>&nbsp;development plans that are tailored to your individual needs and interests&nbsp;</li><li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li><li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;&nbsp;</li><li><strong>Group Life and Personal Accident Insurance:&nbsp;</strong>The company provides Life Assurance cover&nbsp;</li><li><strong>The Employee Share Plan:&nbsp;</strong>Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li><li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones</li></ul><p><strong>Job Objective:</strong></p><br><p>Contributing to technical delivery of engineering excellence through:&nbsp;</p><br><ul><li>Executing assigned scopes of work.</li><li>Providing discipline expertise to the business.</li><li>Supporting and supervising task delegation to team.&nbsp;</li><li>Uses technical knowledge to perform engineering assignments and produce engineering deliverables including complex problems. Completes almost any engineering tasks with minimal guidance and direction. May serve as the primary discipline engineer or discipline technical authority on projects with small to medium complexity.&nbsp;</li><li>Performs engineering assignments, usually representing a significant portion of a larger project. Selects engineering techniques to solve problems and makes design recommendations.&nbsp;</li><li>Requires mature professional knowledge in planning and conducting assignments having scope for coordination of difficult tasks.&nbsp;</li><li>Applies specific area(s) of expertise in own discipline area&nbsp;</li><li>In consultancy businesses, may review and manages complex projects within area of expertise or of a multidisciplinary nature</li></ul><p><strong>Key Accountabilities &amp; Responsibilities:</strong></p><br><p><strong>Executing Assigned Scopes of Work:</strong></p><br><ul><li>Participates as a team member in a specific phase of a broad engineering assignment.</li><li>Directs preparation of appropriate documentation for assigned projects.&nbsp;</li><li>Ensures successful completion of the assigned project/phase within the budgeted time and cost&nbsp;</li><li>constraints.&nbsp;</li><li>Participates in defining engineering approaches, and in planning and scheduling work</li><li>Evaluates problems, organizes investigations and establishes general performance specifications for&nbsp;</li><li>components, equipment, systems, processes, etc.&nbsp;</li><li>Check Engineering calculations as well as check all drawings in accordance with industry codes and&nbsp;</li><li>standards; Assist with the development of less senior Technical Professionals</li><li>Adhere to and comply with relevant discipline specific procedures and provide feedback for&nbsp;</li><li>continuous improvement.</li><li>Participate in audits and incident investigations as required.</li><li>Performs complex engineering tasks related to specific units of major projects</li><li>Participate in site visits, project review meetings, design reviews and other workshops as required.</li><li>Organising and active participation in design reviews</li></ul><p><strong>Providing discipline expertise:</strong></p><br><ul><li>Solves problems requiring development of new approaches or new uses for existing approaches; exercises mature professional judgment in evaluating and selecting technical strategic options.</li><li>As necessary, modifies established guidelines, devises new approaches, applies existing criteria in new ways and draws conclusions from comparative situations.</li><li>Regularly functions as a technical leader or significant contributor to a major complex problem or project</li><li>Produces innovative ideas and solves problems requiring development of new approaches or new uses for existing approaches</li><li>Consistently called on to use creativity and professional judgement to formulate results based on engineering standards, experience and constructive thinking</li><li>Develops unique solutions for complex technical problems</li><li>Anticipates potential problems and takes the initiative to solve complex problems through creative thinking and creative use of internal and external resources both inside and outside of discipline expertise</li><li>Exercises mature professional judgement in identifying the implications of experimental results</li><li>Understands customer needs and applies technical solutions to meet goals</li><li>Provide technical input and support to proposals as required</li></ul><p><strong>Supporting and Supervising task delegation to team:</strong></p><br><ul><li>May supervise a small work group consisting of technical/professional staff with some coaching from own supervisor, or may provide advice and guidance in area of specialization to others.</li><li>Assist in performing managerial tasks as requested, such as assigning tasks to engineers; planning and coordinating portions of the engineering work; preparing scopes, schedules, and budgets; attending project meetings; and developing lesser-experienced technical professionals</li><li>Discusses with other senior engineers to agree priorities and implications on work of others</li><li>Approves work schedules and makes recommendations for increased resources and special equipment</li><li>Makes commitments on acceptance of projects, completion dates, resources and staff required to meet goals.</li><li>Coordinates the activities of engineering and design groups assigned to small projects.</li><li>Participates in developing deadlines, projects and work to be done</li><li>May manage one or more small projects, with responsibility for cost, schedule, resources allocation and risk.</li><li>Provide appropriate HSSE leadership including compliance with site and office safety requirements and technical/design safety requirements</li></ul><p><strong>Working Relationships&nbsp;</strong></p><br><p><strong>Internal:</strong></p><br><ul><li>Develops productive, collaborative relationships of trust within and across projects, offices and regions, as well as with functions.</li><li>Engage with inter-discipline community and promote discipline including: networking / knowledge sharing.</li><li>Often required to persuade individuals with differing positions or interest to change criteria or methods, accept findings or reach agreement on technical points</li><li>Solicits understanding and support of managers for major projects and uses available technical resources</li></ul><p><strong>External:</strong></p><br><ul><li>Establishing and / or maintaining an awareness of external stakeholders including: industry bodies, academia, vendors</li><li>Builds relationships with customers as appropriate&nbsp;</li><li>Seeks out new avenues for building external relationships; maintains on-going contacts with existing relationships; coaches others on relationship management issues</li></ul><p><strong>Level Of Influence &amp; Decision-Making Authority:</strong></p><br><ul><li>Work is assigned in terms of goals and priorities; duties are carried out within broad guidelines and unusual or complex matters are generally referred to more senior authority.</li><li>Actions and decisions typically have a significant influence on the technical, operational and financial results of one or more projects or departments.</li><li>Translates standards and guidelines into practical actions</li><li>No direct reports but frequently serves as a technical resource</li><li>May be required to supervise teams and provide technical guidance to drafters/designers and technical professionals with some coaching from own supervisor&nbsp;</li><li>Accountable for own targets</li><li>Overall performance is reviewed and evaluate</li></ul><br>Qualifications:<br><p><b>What makes you remarkable?&nbsp;</b></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.</p><br><p><b>Expected:</b></p><br><ul><li>B.Sc.&nbsp;or equivalent degree in the Engineering discipline from an accredited&nbsp;university.</li><li>Minimum&nbsp;of 15+&nbsp;years&nbsp;relevant&nbsp;experience&nbsp;in&nbsp;major&nbsp;Brownfield&nbsp;oil &amp; gas projects, including at least five (5) years&nbsp;in&nbsp;similar position.</li></ul><p><b>Knowledge, skills and experience:</b></p><br><ul><li>Specific experience in Oil and Gas projects across their lifecycle in the GCC region, preferred</li><li>Pre-FEED, FEED experience is required</li><li>Detailed Engineering experience is preferred</li><li>Candidates must have hands-on experience managing or delivering Lump Sum contracts/projects<br></li></ul><p><b>Role-Specific Skills and Knowledge:&nbsp;</b></p><br><ul><li>Ability to provide guidance and direction to project team, managing, motivating and mentoring professional engineering specialists.</li><li>Ability to discover issues and recommend solutions to technical and commercial issues uncovered during course of performing assignments</li><li>Proficient user of relevant software and calculation templates</li><li>Professional level of ability in the application of standards, processes and procedures and how they are used in work execution</li><li>Professional level of knowledge of applicable codes and standards</li><li>Technically competent in own discipline, pursues continuous professional development of skills and knowledge according to standards</li><li>Maintains own knowledge of relevant regulatory framework, legislation changes, initiatives and industry technology developments and promotes to direct reports.&nbsp;</li><li>Applies mature professional knowledge and experience to assignments where issues and factors to be considered may be characterized by unsual demands and require additional evaluation to establish the nature and scope of the problem</li><li>Demonstrated ability to apply advanced laws, principles, mathematics or industry knowledge in the improvement and development of designs</li><li>Demonstrated skills in persuasion, negotiation, motivation and communication</li><li>Demonstrated proficiency in project planning</li><li>Possess a working knowledge of the various Business Units, Functions, Sectors and services offered within business area, and general understanding of other Wood business offerings</li></ul><p><b>Personal attributes:</b></p><br><ul><li>Solutions-oriented and creative, able to apply process and rigour to deliver quality solutions</li><li>Compelling communicator both verbally and in written form</li><li>Good interpersonal and team working skills, builds positive relationships with supervisors, subordinates, peers and clients</li><li>Enthusiastic, conscientious and committed to continuous professional development</li><li>High level of awareness and commitment to safety in all aspects of daily work.</li><li>Strong organizational skills and attention to detail.</li><li>Highly motivated and demonstrates personal initiative.</li><li>Possesses integrity, strong work ethic, positive attitude, and is dependable.&nbsp;</li><li>Adaptable and flexible to the changing needs of project</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Supervise and coordinate all the project's technical aspects in Concrete Repair from the beginning until the end and perform an organizational and technical role on construction projects, apply designs and plans on the site, in addition to solve any technical issue.</p><p><br></p><p> ·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Perform the assigned duties as per the set policies and procedures in order to achieve the project goals.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Manage, monitor all day to day technical site's activities or problems.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Plan the work and efficiently organize the site facilities in order to meet agreed deadlines.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Supervise all on-site civil activities by monitoring the work performed, the material incorporated the manpower and&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;equipment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide solutions and recommendations to unexpected technical problems on site.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide guidance to all subordinates to ensure effective and efficient flow of work, and ensure all employees recognize their fundamental role.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Manage quality control and safety matters on the site and ensure that the sub-contractor follows the agreed upon quality and safety procedures </p><p> related to the civil work in the project.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Liaise with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of </p><p> progress.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Check plans, drawings and quantities for accuracy of calculations.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure that all materials used and work performed are in accordance with the specifications.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oversee the selection and requisition of materials in order to meet the project's specification.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide technical feedback, interpret blueprints, technical drawings, schematics.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Prepare reports on a weekly, monthly, quarterly and submit them to the direct manager. </p><p>&nbsp;·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide labors with equipment, tools, start cards, permits, approved shop drawings, etc.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Prepare and submit progress report of executed work, materials on site and labor's time sheet on a monthly basis. </p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Up-date the daily work schedule, coordinate with the main contractor and plan work progress for the next day.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Make sure that all the quality of work is as same as company's standards. </p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Perform any other tasks related to the job assigned by the direct manager.</p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Civil Engineering or in any related field.</li><li>At least 2 years of experience in a similar role</li><li>Good knowledge in Microsoft Office.</li><li>Valid UAE Driving Licence</li></ul><p><br></p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Commissioning Engineer<br><br><p><b><i>"Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Job Requirement</b></p><br><br><br><p>KBR is looking for a <b>Senior Commissioning Engineer </b>with <b>oil &amp; gas</b> experience, to be based in <b>Abu Dhabi</b> for a <b>PMC project.</b></p><br><br><br><br><p><b><u>Experience required:</u></b></p><br><br><br><ul><li>Minimum Overall 15+ years of oil &amp; gas experience.</li><li>Experience in Oil &amp; Gas EPC projects.</li><li>Experience working on Gas Pipeline projects.</li><li>NGL Pipeline networks.</li><li>Experience working on multi-million-dollar projects.</li><li>Experience in ADNOC Projects involving Onshore plants, pipelines etc.…</li><li>Must have at least 5+ Years experience working in Onshore projects.</li><li>Bachelor’s degree in engineering is a MUST.</li></ul><br><p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p><br><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking a seasoned Senior Planning Engineer to lead schedule and cost controls across complex infrastructure and buildings programs. You will shape robust baselines, drive project performance, and provide clear insights that help our clients make confident decisions.</p><br><ul><li>Ensure project schedules comply with specifications, guidelines, and standard work breakdown structures (WBS)&nbsp;</li><li>Coordinate planning activities , including interim milestones, traffic staging, and sectional handover requirements.</li><li>Monitor and integrate authority approvals (NOCs, permits, traffic diversion approvals, utility coordination) into the project schedule.</li><li>Review and assess contractors’ programs against contractual milestones, key performance indicators (KPIs), and phasing requirements.</li><li>Develop, review, and maintain detailed project schedules (baseline, recovery, and revised programs) using Primavera P6 or equivalent planning software.</li><li>Prepare master schedules, look-ahead programs, and weekly/monthly progress reports in coordination with project teams.</li><li>Monitor project progress against the approved baseline and identify delays, risks, and critical path impacts.</li><li>Perform schedule risk analysis, delay analysis, and time impact analysis (TIA) in accordance with contract requirements.</li><li>Coordinate with construction, procurement, design, and commercial teams to ensure alignment between schedule, resources, and deliverables.</li><li>Review contractors’ planning submissions, method statements, and manpower histograms for compliance with contract specifications.</li><li>Support the Project Manager/Resident Engineer by providing planning inputs for decision-making and corrective actions.</li><li>Prepare and evaluate EOT (Extension of Time) claims, substantiating delays with proper planning narratives and evidence.</li><li>Track procurement, long-lead items, approvals, and permits to ensure schedule compliance.</li><li>Develop recovery and mitigation plans to bring delayed activities back on track.</li><li>Conduct weekly and monthly planning meetings with stakeholders and issue meeting minutes related to schedule actions.</li><li>Ensure integration of cost, cash flow, and resource-loaded schedules where required.</li><li>Maintain proper documentation and ensure planning records comply with project controls and QA/QC procedures.</li><li>Provide mentoring and guidance to junior planning engineers and site planners.</li><li>Liaise with clients, consultants, and authorities on all schedule-related matters.</li><li>Support project close-out by preparing as-built programs and final planning reports.</li></ul><br>Qualifications<br><ul><li>Bachelor’s degree in Engineering, Construction Management, Quantity Surveying, or related field (Master’s preferred).</li><li>Senior planning/controls role requiring 10+ years’ experience, strong base cost and standard planning capability, consultancy and local market experience, and a proven track record across infrastructure and buildings.</li><li>Advanced proficiency in Primavera P6, cost control, EVM, risk analysis, and executive‑quality reporting is essential.</li><li>Client‑facing leadership, clear communication, and rigorous governance will be central to success.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<ul><li><p>Manage and coordinate mechanical projects from initiation to completion, ensuring timely delivery within scope, budget, and quality standards.</p></li><li><p>Oversee all aspects of lip seal welding operations, ensuring compliance with industry standards and client specifications.</p></li><li><p>Supervise fabrication and general welding activities across various stages of the project.</p></li><li><p>Collaborate with design, procurement, and quality control teams to ensure project alignment.</p></li><li><p>Develop project schedules, resource plans, and progress tracking reports.</p></li><li><p>Conduct risk assessments and implement mitigation plans.</p></li><li><p>Liaise with clients, contractors, and internal teams to ensure effective communication and project transparency.</p></li><li><p>Monitor team performance and provide technical guidance to ensure adherence to welding procedures and safety standards.</p></li><li><p>Ensure all welding and fabrication work complies with relevant codes (e.g., ASME, AWS, ISO) and company procedures.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field, with a strong foundation in thermodynamics and fluid mechanics.</p></li><li><p>At least 3-5 years of relevant industry experience, preferably in Oil and Gas, EPC, or Marine or Construction sectors.</p></li><li><p>Proven experience in managing mechanical projects with a focus on lip seal welding, welding techniques, and fabrication processes.</p></li><li><p>Familiarity with materials used in high-pressure and corrosive environments.</p></li><li><p>Certification in Project Management (PMP) is a plus.</p></li></ul>

<br><ul><li><p>Maintain and manage an up-to-date vendor database, including vendor details and approved products/services.</p></li><li><p>Develop and support ICV-certified local vendors and international vendors with a local presence.</p></li><li><p>Build and optimize vendor relationships across business units.</p></li><li><p>Source, evaluate, and negotiate products and services, prepare bid analysis, process purchase orders, and monitor delivery schedules.</p></li><li><p>Ensure procured materials and services meet technical specifications and end-user requirements.</p></li><li><p>Coordinate with operations teams to support forecasts for required products and services.</p></li><li><p>Work with the warehouse team to resolve discrepancies, deviations, or quality issues related to received materials.</p></li><li><p>Liaise with project managers and clients regarding procurement and project requirements.</p></li><li><p>Submit and follow up on technical clarifications with project teams and clients.</p></li><li><p>Support supplier evaluation processes and monitor supplier performance improvement actions.</p></li><li><p>Ensure compliance with Oil & Gas industry safety, quality, and HSE standards.</p></li><li><p>Act as a focal point for operational procurement requirements and ensure timely actions to avoid delays.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in mechanical engineering or E&I.</p></li><li><p>8–10 years of relevant experience in the UAE, preferably within the Oil & Gas sector.</p></li><li><p>Strong communication, coordination, and stakeholder management skills.</p></li></ul><br>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Senior Planning Engineer leads the planning and scheduling functions across large-scale projects, ensuring alignment with project objectives, timelines, and budgets.</p><p>&nbsp;</p><p>Programme Development &amp; Management</p><ul><li>Preparation, submission and updating of baseline programme.</li><li>Follow-up subcontractors’ programs in coordination with baseline programme.</li><li>Prepare and maintain the project As Built program and close out schedule.</li><li>Prepare regular updates and track schedule of resources (plant and manpower) to meet activities milestones.</li><li>Prepare regular updates, and tracks material schedules (submissions, approvals, orders, deliveries in accordance with contract schedule ensuring timely availability of materials whilst preventing negative schedule impact) and produce related reports to the Planning Manager.</li><li>Overview performance of weekly backups of all modified and submitted schedules.</li></ul><p>&nbsp;</p><p>Reporting &amp; Communication</p><ul><li>Generate and/or review periodical reports, and lookaheads.</li><li>Initiation / responding to all planning / time related correspondence to consultant / subcontractors.</li><li>Attend all Site coordination meetings.</li><li>Overview the inputs information on progress from/by site personnel, subcontractors, and suppliers.</li></ul><p>&nbsp;</p><p>Analysis &amp; Claims</p><ul><li>Prepare cost / time impact studies on variations to project to determine whether the claim is warranted in conjunction with the planning manager.</li><li>Assist to Prepare the Extension of Time (EoT) claims and support forensic schedule analysis.</li></ul><p>&nbsp;</p><p>Risk Management &amp; Mitigation</p><ul><li>Identify potential project risks and develop mitigation strategies.</li><li>Monitor the progress of the work against the contractual schedule, advise the Planning Manager on schedule slippage and prepare recovery plans.</li></ul><p>&nbsp;</p><p>Coordination &amp; Compliance</p><ul><li>Liaise with the relevant site departments to expedite document processes (Submission, approval, orders etc.) to commence work activity and avoid slippage, all coordinated with the Planning Manager.</li><li>Ensure compliance with ACC Planning Department SOP.</li></ul><p>&nbsp;</p><p>Mentoring &amp; Team Support</p><ul><li>Mentor and review the work of junior and planning engineers.</li><li>Prepare and maintain production rates for equipment and labor for all trades.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Required Qualifications &amp; Competencies:</p><ul><li>Bachelor’s degree in Civil engineering.</li><li>10+ years of experience in planning roles on complex projects.</li><li>Solid knowledge of Project scheduling, Risk management, Data analysis</li><li>Solid knowledge of Critical path method and Forensic schedule analysis</li><li>Solid knowledge of claims, EOT analysis, and contractual terms.</li><li>Project Management Professional (PMP) certification preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and presentations skills.</li><li>Team collaboration and leadership skills.</li><li>Proficiency in project management software, Primavera P6 and advanced Excel, (Power BI preferred).</li><li>Proficiency in English language (writing and speaking)</li></ul></div>

<p> <strong>1. <u>Site Execution</u></strong></p><ul><li><p>Supervise RCC works, foundations, slabs, pits, trenches, tanks and other civil works as per approved drawings and specifications.</p></li><li><p>Check reinforcement, formwork, dimensions, levels and embedded items before concreting.</p></li><li><p>Monitor contractor manpower, materials, equipment and daily productivity.</p></li><li><p>Track actual progress against agreed targets, identify delays and ensure necessary recovery actions are implemented.</p><br><ol start="2"><li><p><strong><u>BOQ, Quantity Measurement & Billing</u></strong></p><br></li></ol></li></ul><ul><li><p>Understand the BOQ and verify executed quantities against approved drawings and actual site work.</p></li><li><p>Jointly measure completed quantities with the Civil Contractor on a daily basis and maintain proper measurement records.</p></li><li><p>Verify quantities of concrete, reinforcement, formwork and other civil works.</p></li><li><p>Check and certify contractor progress bills based on actual measured and completed quantities.</p></li><li><p>Identify and verify any variation or additional work before it is considered for billing.</p><br><ol start="3"><li><p><strong><u>Machine & Equipment Foundations</u></strong></p></li></ol></li></ul><ul><li><p>Supervise machine and heavy equipment foundations, ensuring correct dimensions, levels, openings and embedded components.</p></li><li><p>Coordinate civil readiness with machinery installation requirements.</p><br><ol start="4"><li><p><strong><u>PEB & Anchor Bolt Coordination</u></strong></p></li></ol></li></ul><ul><li><p>Coordinate pedestal preparation, anchor bolt fixing, alignment and levels with the PEB contractor.</p></li><li><p>Ensure foundations are completed and handed over according to the PEB erection sequence.</p><br><ol start="5"><li><p><strong><u>Drainage & Underground Services</u></strong></p></li></ol></li></ul><ul><li><p>Supervise stormwater, sewerage, industrial drainage, trenches, manholes and underground civil works.</p></li><li><p>Check slopes and invert levels and coordinate with MEP services to avoid clashes.</p><br><ol start="6"><li><p><strong><u>Quality & Technical Coordination</u></strong></p></li></ol></li></ul><ul><li><p>Ensure execution complies with approved drawings, specifications and required quality standards.</p></li><li><p>Coordinate inspections, RFIs, technical clarifications and testing with consultants and contractors.</p></li><li><p>Review structural, architectural, PEB and relevant MEP drawings for site coordination.</p><br><ol start="7"><li><p><strong><u>Project Handover</u></strong></p></li></ol></li></ul><ul><li><p>Coordinate snagging, rectification, as-built documentation and final handover of civil works.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification & Experience</strong></p><ul><li><p>Bachelor’s Degree in Civil Engineering.</p></li><li><p>5–10 years of experience, preferably in industrial/manufacturing plant construction.</p></li><li><p>UAE/GCC experience preferred.</p></li><li><p>Strong knowledge of RCC works, machine foundations, PEB foundations/anchor bolts, drainage and underground works.</p></li><li><p>Strong understanding of BOQ, site measurement, quantity verification and contractor billing.</p></li><li><p>Ability to read structural, architectural and coordination drawings.</p></li><li><p>AutoCAD and MS Office proficiency.</p></li><li><p>Strong site execution and contractor management skills.<br></p><p>Preference: Experience in manufacturing plants, industrial facilities, PEB buildings or heavy machinery foundation projects.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job SENIOR CIVIL ENGINEER <p>We are seeking an experienced Civil Engineer with 15+ years of experience in Oil &amp; Gas / EPC projects to support an ADNOC Onshore project. The candidate will be responsible for civil engineering activities at site, with strong experience in construction, installation, testing, commissioning and site execution. The<span>&nbsp;ideal candidate must be ADNOC Approved and have hands-on experience working on major onshore Oil &amp; Gas projects.</span></p><br> <p><strong>JOB RESPONSIBILITIES: </strong></p><br> <ul> <li>Supervise and coordinate civil construction activities at site.</li> <li>Review and interpret civil drawings, specifications, method statements and project requirements.</li> <li>Coordinate with construction, engineering, commissioning and subcontractor teams.</li> <li>Monitor civil works including foundations, concrete works, structural works, roads, paving, underground works and other site civil activities.</li> <li>Ensure construction activities are executed as per approved drawings, specifications, HSE requirements and project schedule.</li> <li>Coordinate with other disciplines to resolve site technical and construction issues.</li> <li>Inspect completed works and ensure compliance with project quality requirements.</li> <li>Support testing, pre-commissioning and commissioning activities related to civil works.</li> <li>Review RFIs, technical queries, site instructions and as-built documentation.</li> <li>Monitor subcontractor performance, progress and quality of work.</li> <li>Participate in site inspections, walkdowns, punch-list clearance and handover activities.</li> <li>Coordinate with QA/QC and HSE teams to ensure compliance with project standards.</li> <li>Ensure all civil activities comply with ADNOC standards and project specifications.</li> <li>Provide technical support during construction and commissioning phases.</li> </ul> <p><strong>KEY QUALIFICATIONS:</strong></p><br> <ul> <li>Bachelor's Degree in Civil Engineering or equivalent.</li> <li>15+ years of relevant experience in Oil &amp; Gas / Petrochemical / Industrial projects.</li> <li>ADNOC Approval is mandatory.</li> <li>Strong experience in ADNOC Onshore projects is required.</li> <li>Proven site-based construction and commissioning experience.</li> <li>Experience across relevant civil disciplines, including structural/civil works, foundations, concrete, roads, underground utilities and associated infrastructure.</li> <li>Strong knowledge of construction methodologies, QA/QC requirements and HSE procedures.</li> <li>Experience coordinating with EPC contractors, subcontractors, consultants and client teams.</li> <li>Ability to read and interpret engineering drawings, specifications and construction documents.</li> <li>Strong experience in site inspections, technical coordination, punch-list clearance and project handover.</li> <li>Immediate joiner / short notice candidates preferred.</li> <li>Candidates must be willing to work site-based in the UAE.</li> </ul> <p>VERTICAL </p><br> <p>ENGINEERING</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job SENIOR MECHANICAL ENGINEER <p>We are seeking an experienced Mechanical Engineer with 15+ years of experience in Oil &amp; Gas / EPC projects to support an ADNOC Onshore project. The candidate will be responsible for supervising and coordinating mechanical activities at site, with strong experience in construction, installation, testing, pre-commissioning and commissioning. The ideal candidate must be ADNOC Approved and have hands-on experience in major onshore Oil &amp; Gas projects.</p><br> <p><strong>JOB RESPONSIBILITIES:</strong></p><br> <ul> <li>Supervise and coordinate mechanical construction and installation activities at site.</li> <li>Review and interpret mechanical drawings, specifications, method statements and project requirements.</li> <li>Coordinate with engineering, construction, commissioning, QA/QC and subcontractor teams.</li> <li>Monitor installation and construction activities for mechanical equipment and systems.</li> <li>Coordinate mechanical works including static equipment, rotating equipment, packages, tanks, pressure vessels, pumps, compressors and associated systems, as applicable to the project.</li> <li>Ensure mechanical activities are executed in accordance with approved drawings, specifications, project procedures and ADNOC standards.</li> <li>Coordinate with other disciplines to resolve site technical and construction issues.</li> <li>Monitor subcontractor activities, productivity, progress and quality.</li> <li>Participate in inspections, testing, pre-commissioning, commissioning and system handover activities.</li> <li>Support equipment installation, alignment, preservation and mechanical completion activities.</li> <li>Review RFIs, technical queries, site instructions and engineering changes.</li> <li>Coordinate with QA/QC for inspection, testing and documentation requirements.</li> <li>Participate in site walkdowns, punch-list preparation and clearance.</li> <li>Support mechanical completion, commissioning and handover activities.</li> <li>Ensure compliance with project HSE requirements and safe working practices.</li> <li>Provide technical support to the construction and commissioning teams throughout the project.</li> </ul> <p><strong>JOB RESPONSIBILITIES:</strong></p><br> <ul> <li>Bachelor's Degree in Mechanical Engineering or equivalent.</li> <li>15+ years of relevant experience in Oil &amp; Gas / Petrochemical / Industrial projects.</li> <li>ADNOC Approval is mandatory.</li> <li>Strong experience in ADNOC Onshore projects is required.</li> <li>Proven experience in site-based mechanical construction and commissioning.</li> <li>Strong exposure to mechanical equipment installation and construction activities.</li> <li>Experience with relevant mechanical disciplines, including static equipment, rotating equipment, packages, tanks, vessels, pumps, compressors and associated mechanical systems, depending on project scope.</li> <li>Strong knowledge of mechanical construction methodologies, inspection requirements and QA/QC procedures.</li> <li>Experience coordinating with EPC contractors, subcontractors, consultants and client teams.</li> <li>Ability to read and interpret mechanical drawings, equipment specifications, datasheets and construction documents.</li> <li>Experience with mechanical completion, pre-commissioning, commissioning, punch-list clearance and handover.</li> <li>Strong knowledge of Oil &amp; Gas site safety requirements and permit-to-work procedures.</li> <li>Willingness to work site-based in the UAE.</li> </ul><p>VERTICAL</p><br><p>ENGINEERING</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Description: Civil Site Engineer – Substation Projects (UAE)</strong> ???</p><br><p><strong>Position Title:</strong> Civil Site Engineer<br><strong>Project Type:</strong> Electrical Substation Projects (132kV / 220kV / 400kV and Distribution Substations)<br><strong>Location:</strong> United Arab Emirates (Abu Dhabi, Dubai, Northern Emirates)<br><strong>Reporting To:</strong> Project Manager / Senior Civil Engineer / Construction Manager</p><br>1. Job Purpose ?<p>The Civil Site Engineer for substation projects is responsible for planning, supervising, and executing civil construction activities at electrical substations in compliance with project specifications, authority requirements, safety standards, and quality procedures. The role ensures that all civil works such as foundations, cable trenches, control buildings, equipment plinths, boundary walls, roads, and drainage systems are executed efficiently, safely, and within schedule.</p><br><p>The Civil Site Engineer acts as the key interface between the design team, subcontractors, consultants, and project management to ensure smooth project execution. The position requires strong coordination skills, technical knowledge of substation civil works, and familiarity with UAE authority standards such as ADDC, AADC, DEWA, SEWA, FEWA/EtihadWE, and TRANSCO.</p><br>2. Key Responsibilities ??A. Site Execution &amp; Supervision<ul><li>Supervise day-to-day civil construction activities at substation sites.</li><li>Ensure works are carried out as per approved drawings, method statements, and project specifications.</li><li>Coordinate with subcontractors for execution of foundations, cable trenches, transformer bunds, GIS buildings, control rooms, and internal roads.</li><li>Monitor excavation, backfilling, compaction, and concrete works.</li><li>Ensure proper levels and alignment for equipment foundations.</li><li>Supervise installation of underground utilities and drainage systems.</li><li>Verify rebar placement, formwork, embedment installation, and concrete pouring.</li><li>Check compliance with approved ITPs (Inspection and Test Plans).</li><li>Ensure proper curing and protection of concrete structures.</li></ul>B. Planning &amp; Scheduling ?<ul><li>Prepare weekly and daily work plans in coordination with the construction manager.</li><li>Monitor progress against project schedule and highlight delays.</li><li>Coordinate with procurement team for material delivery.</li><li>Ensure manpower and equipment availability for planned activities.</li><li>Assist in preparation of look-ahead schedules.</li><li>Support recovery plans in case of project delays.</li></ul>C. Coordination with Stakeholders ?<ul><li>Liaise with consultants for inspections and approvals.</li><li>Coordinate with electrical and mechanical teams for interface works.</li><li>Communicate with surveyors for setting out works.</li><li>Attend site coordination meetings with contractors and clients.</li><li>Resolve site technical issues in consultation with design team.</li><li>Coordinate with QA/QC engineers for inspections.</li></ul>D. Quality Control &amp; Assurance ?<ul><li>Ensure all materials comply with approved submittals.</li><li>Conduct site checks before consultant inspections.</li><li>Monitor concrete cube testing and compaction tests.</li><li>Ensure compliance with authority standards (ADDC, DEWA, etc.).</li><li>Maintain site quality records.</li><li>Ensure corrective actions for non-conformance reports (NCRs).</li><li>Follow approved method statements.</li></ul>E. Health, Safety &amp; Environment (HSE) ?<ul><li>Enforce safety procedures at site.</li><li>Conduct daily toolbox talks with workforce.</li><li>Ensure use of PPE by all workers.</li><li>Monitor safe excavation practices.</li><li>Ensure barricading of open trenches and pits.</li><li>Coordinate lifting operations for heavy equipment foundations.</li><li>Report incidents and near misses.</li><li>Ensure compliance with UAE HSE regulations.</li></ul>F. Survey &amp; Setting Out ?<ul><li>Verify benchmarks and reference points.</li><li>Coordinate with surveyor for layout of buildings and foundations.</li><li>Check finished levels of cable trenches and roads.</li><li>Ensure proper slope for drainage systems.</li><li>Verify as-built coordinates.</li></ul>G. Documentation &amp; Reporting ?<ul><li>Prepare daily progress reports.</li><li>Maintain site diaries.</li><li>Record manpower and equipment deployment.</li><li>Prepare inspection requests (IRs).</li><li>Track material delivery and usage.</li><li>Maintain drawing register.</li><li>Prepare red-mark drawings for as-built documentation.</li><li>Assist in preparation of monthly progress reports.</li></ul>3. Scope of Civil Works in Substation Projects ?<p>The Civil Site Engineer will typically handle the following works:</p><br><ul><li>Substation control building construction</li><li>GIS building civil works</li><li>Transformer foundations</li><li>Reactor foundations</li><li>Equipment plinths</li><li>Cable trenches and troughs</li><li>Cable basement works</li><li>Oil containment bunds</li><li>Boundary wall and fencing</li><li>Internal asphalt/concrete roads</li><li>Stormwater drainage systems</li><li>Earthing pits and chambers</li><li>Water tanks and pump rooms</li><li>Security buildings</li><li>Equipment gantry foundations</li><li>Firefighting water reservoir structures</li><li>Duct banks and underground sleeves</li></ul>4. Technical Requirements ?<ul><li>Good understanding of substation layout drawings.</li><li>Knowledge of reinforced concrete structures.</li><li>Experience in heavy equipment foundations.</li><li>Understanding of soil conditions and ground improvement.</li><li>Familiarity with cable trench construction.</li><li>Knowledge of concrete mix design and testing.</li><li>Ability to read IFC drawings and shop drawings.</li><li>Understanding of UAE construction standards.</li><li>Experience with excavation and shoring systems.</li><li>Knowledge of waterproofing and joint sealing.</li></ul>5. Qualification Requirements ?<ul><li>Bachelor’s Degree in Civil Engineering.</li><li>Minimum 4–8 years of experience in civil construction.</li><li>At least 2–3 years in substation projects in UAE.</li><li>Experience in high voltage substations preferred.</li><li>Knowledge of authority standards (DEWA/ADDC/TRANSCO).</li><li>UAE driving license preferred.</li></ul>6. Skills &amp; Competencies ?<ul><li>Strong technical knowledge of civil works.</li><li>Good communication skills.</li><li>Ability to coordinate multiple teams.</li><li>Problem-solving capability.</li><li>Planning and organizational skills.</li><li>Leadership abilities.</li><li>Time management skills.</li><li>Attention to detail.</li><li>Ability to work under pressure.</li><li>Familiarity with AutoCAD drawings.</li></ul>7. Software Knowledge ?<ul><li>AutoCAD (basic review)</li><li>MS Excel</li><li>MS Project / Primavera (basic)</li><li>MS Word</li><li>Inspection management systems</li><li>ERP systems (preferred)</li></ul>8. Key Performance Indicators (KPIs) ?<ul><li>Progress vs schedule achievement</li><li>Quality compliance rate</li><li>Number of NCRs</li><li>Safety compliance</li><li>Productivity of subcontractors</li><li>Material wastage control</li><li>Inspection approval rate</li><li>Project milestone achievement</li></ul>9. Working Conditions ?<ul><li>Site-based role in outdoor environment.</li><li>Work in high temperature conditions typical in UAE.</li><li>Coordination with multiple subcontractors.</li><li>Occasional extended working hours to meet deadlines.</li><li>Travel between multiple substation sites may be required.</li></ul>10. Responsibilities During Project Phases ?Mobilization Phase<ul><li>Review drawings and specifications.</li><li>Participate in site handover.</li><li>Coordinate site setup.</li><li>Verify benchmarks.</li></ul>Construction Phase<ul><li>Supervise all civil works.</li><li>Coordinate inspections.</li><li>Monitor progress.</li><li>Ensure quality compliance.</li></ul>Testing &amp; Commissioning Phase<ul><li>Support electrical team.</li><li>Complete finishing works.</li><li>Clear punch list items.</li><li>Assist in handover documentation.</li></ul>Project Close-Out<ul><li>Prepare as-built drawings.</li><li>Close NCRs.</li><li>Finalize documentation.</li><li>Assist in project handover.</li></ul>11. Preferred Experience in UAE Substation Authorities ?<p>Experience in projects under:</p><br><ul><li>TRANSCO</li><li>ADDC / AADC</li><li>DEWA</li><li>SEWA</li><li>EtihadWE (FEWA)</li><li>ADNOC substations</li></ul>12. Reporting Structure ?<p>Civil Site Engineer reports to:</p><br><ul><li>Construction Manager</li><li>Project Manager</li><li>Senior Civil Engineer</li></ul><p>Coordinates with:</p><br><ul><li>Electrical Engineers</li><li>QA/QC Engineers</li><li>HSE Engineers</li><li>Surveyors</li><li></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The ideal candidate should possess a&nbsp;<strong>degree or Diploma in Electrical Engineering</strong> or a closely related engineering discipline. Candidates with additional technical certifications or specialized training relevant to construction, civil works, power plant operations, or substation projects will have an added advantage.</p><br><p>Applicants must have&nbsp;<strong>a minimum of 3 years and a maximum of 10 years of relevant professional experience</strong>, preferably gained in&nbsp;<strong>civil engineering projects, power plants, or electrical substations</strong>. Experience in&nbsp;<strong>Gulf countries and/or India</strong> is highly desirable, as it demonstrates familiarity with regional standards, practices, and regulatory requirements. Exposure to diverse project environments and multicultural teams will be beneficial.</p><br><strong>Technical Skills and Project Experience</strong><p>The candidate should have hands-on experience in executing engineering projects, particularly in&nbsp;<strong>construction, installation, testing, and commissioning</strong> activities. They should be well-versed in interpreting engineering drawings, specifications, and technical documents.</p><br><p>Practical knowledge and experience in the following areas are essential:</p><br><ul><li><strong>Quality Management Systems (QMS)</strong>: Ensuring project activities comply with established quality standards and procedures.</li><li><strong>Health, Safety, and Environment (HSE)</strong>: Implementing HSE policies, conducting risk assessments, and promoting a safe work culture.</li><li><strong>Risk Management</strong>: Identifying, evaluating, and mitigating risks throughout the project lifecycle.</li><li><strong>Subcontractor Management</strong>: Coordinating with subcontractors, monitoring progress, and ensuring contractual compliance.</li><li><strong>Project Execution and Monitoring</strong>: Tracking project progress, managing resources, and ensuring timely delivery within budget constraints.</li></ul><p>Experience in&nbsp;<strong>power plants and substations</strong>, including electrical installation, cable laying, transformer erection, switchgear installation, and testing, will be highly preferred.</p><br><strong>Leadership and Supervisory Responsibilities</strong><p>The role requires candidates with proven&nbsp;<strong>management and supervisory experience</strong>. The candidate should be capable of leading teams effectively and ensuring that project objectives are achieved efficiently.</p><br><p>Key responsibilities include:</p><br><ul><li><strong>Managing and Supervising Site Activities</strong>: Overseeing daily operations at the project site and ensuring work is carried out according to approved plans and schedules.</li><li><strong>Team Leadership</strong>: Guiding and motivating site engineers, technicians, and workers to maintain productivity and quality standards.</li><li><strong>Resource Allocation</strong>: Efficient utilization of manpower, materials, and equipment.</li><li><strong>Progress Monitoring</strong>: Tracking milestones, preparing progress reports, and identifying delays or bottlenecks.</li><li><strong>Problem Resolution</strong>: Addressing technical and operational challenges promptly to avoid disruptions.</li></ul><p>The candidate should demonstrate a proactive approach to leadership, ensuring smooth coordination between different teams and stakeholders.</p><br><strong>Communication and Coordination Skills</strong><p>Strong&nbsp;<strong>communication and interpersonal skills</strong> are essential for this role. The candidate must be able to interact effectively with various stakeholders, including:</p><br><ul><li><strong>Clients</strong></li><li><strong>Consultants</strong></li><li><strong>Vendors and Suppliers</strong></li><li><strong>Internal Project Teams</strong></li></ul><p>They should be confident in conducting meetings, presenting updates, and resolving issues collaboratively. Effective written communication skills are also important for preparing reports, documentation, and correspondence.</p><br><strong>Personal Attributes and Competencies</strong><p>The ideal candidate should be a&nbsp;<strong>self-motivated and result-oriented professional</strong> who can work independently as well as part of a team. They should possess the following qualities:</p><br><ul><li><strong>Problem-Solving Abilities</strong>: Capability to analyze complex situations and implement practical solutions.</li><li><strong>Attention to Detail</strong>: Ensuring accuracy and compliance with specifications.</li><li><strong>Time Management</strong>: Ability to handle multiple tasks and meet deadlines.</li><li><strong>Adaptability</strong>: Willingness to work in dynamic environments and adjust to project demands.</li><li><strong>Decision-Making Skills</strong>: Ability to make informed decisions under pressure.</li></ul><strong>Additional Expectations</strong><ul><li>Familiarity with&nbsp;<strong>local regulations and international standards</strong> related to electrical and civil engineering projects.</li><li>Understanding of project documentation, including method statements, inspection test plans (ITPs), and project schedules.</li><li>Commitment to maintaining high standards of&nbsp;<strong>safety, quality, and professionalism</strong> in all aspects of work.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Technology Innovation Institute (TII)</b>&nbsp;is a publicly funded research institute, based in Abu Dhabi, United Arab Emirates. It is home to a diverse community of leading scientists, engineers, mathematicians, and researchers from across the globe, transforming problems and roadblocks into pioneering research and technology prototypes that help move society ahead.</p><br><br><p><strong>Role Overview</strong></p><br><br><p>As an experienced Senior Software Engineer specializing in embedded security and real-time firmware, you will design, implement, and maintain the embedded software for a physical tamper-detection system detecting&nbsp;and responding&nbsp;to physical intrusion&nbsp;on PCBs. Working&nbsp;with low-power&nbsp;MCUs, you will build the sensing, boot-security, and tamper-response software that protects cryptographic material and mission integrity.&nbsp;</p><br><br><p>This position requires deep proficiency in embedded C/C++ on ARM Cortex-M class devices, hands-on experience with Zephyr (or a comparable RTOS), and strong digital signal processing skills: the systems you build must reliably distinguish genuine tamper events from benign environmental noise and vibration. You will work as a senior individual contributor within a multidisciplinary team of hardware, security, manufacturing, and certification engineers, taking independent ownership of complex firmware subsystems and mentoring junior engineers.&nbsp;</p><br><br><br><p><strong>Industry / Domain</strong></p><br><br><p>Defense &amp; Aerospace / Embedded Security / Hardware Tamper Protection&nbsp;</p><br><br><br><p><strong>Functional Activities</strong></p><br><br><p>Embedded&nbsp;Security Firmware Development: &nbsp;</p><br><br><ul><li>Develop and maintain real-time firmware in C/C++ on ARM Cortex-M class MCUs under Zephyr RTOS, optimized for ultra-low-power, always-on operation in battery-backed power domains.</li><li>Implement secure boot chains (e.g., MCUboot), signed firmware images, and secure update mechanisms ensuring only authentic, unmodified code can run.</li><li>Implement cryptographic key management on-device: provisioning, storage in hardware-protected domains, and reliable key/sensitive-data zeroization on confirmed tamper events.</li><li>Develop tamper-response logic: event latching, tamper-evident logging, anti-rollback, secure debug control, and lifecycle-state enforcement.&nbsp;</li></ul><br><br><p>Sensor Acquisition &amp; Signal Processing: &nbsp;</p><br><br><ul><li>Design and implement sensor acquisition pipelines: ADC interfacing, sampling strategies, and driver development for analog and digital sensor front-ends.</li><li>Apply DSP techniques, including digital filtering, spectral analysis, and feature extraction, to characterize sensor signals in noisy real-world environments.</li><li>Develop and tune event-detection and classification algorithms that separate genuine tamper signatures from environmental noise, vibration, and transient disturbances, minimizing false positives without missing real events.</li><li>Support data-collection campaigns and analysis workflows used to validate and improve detection performance.&nbsp;</li></ul><br><br><p>Platform &amp; System Integration: &nbsp;</p><br><br><ul><li>Perform SoC/MCU platform bring-up on NXP-based and NVIDIA-based platforms: BSP integration, boot-chain validation, peripheral enablement, driver integration, and platform debugging (Linux/Yocto on host platforms where applicable).</li><li>Integrate tamper-protection firmware with host systems over standard interfaces (UART, SPI, I2C, CAN, network), including alert reporting, status telemetry, and command/control flows.</li><li>Work with hardware, FPGA, security, and systems teams to validate end-to-end integration from sensor front-end to host-level response.&nbsp;</li></ul><br><br><p>Security Engineering &amp; Compliance:&nbsp;</p><br><br><ul><li>Contribute to threat modeling, vulnerability assessments, and secure-coding reviews for embedded targets.</li><li>Produce design and implementation evidence supporting certification against hardware-security standards (ISO/IEC 19790, FIPS 140, Common Criteria).</li><li>Support production security workflows: fuse burning, root-of-trust provisioning, device identity, factory flashing, and manufacturing test procedures.&nbsp;</li></ul><br><br><p>Quality &amp; Collaboration: &nbsp;</p><br><br><ul><li>Deliver well-tested firmware through CI/CD pipelines with automated unit, integration, and hardware-in-the-loop (HIL) testing.</li><li>Participate actively in code reviews, design reviews, estimation, and agile ceremonies; mentor junior engineers within your areas of expertise.</li><li>Document designs, interfaces, and test procedures to team standards.</li></ul><br><br><p>Necessary Knowledge and Experience</p><br><br><ul><li>5-8 years of professional embedded software development experience, with firmware shipped through integration, test, and production, preferably in defense, aerospace, or security-critical products.</li><li>Strong C/C++ on ARM Cortex-M class microcontrollers; solid grasp of real-time constraints, interrupt-driven design, and memory-constrained development.</li><li>Hands-on experience with Zephyr RTOS or a comparable RTOS (FreeRTOS, ThreadX) and willingness to specialize in Zephyr.</li><li>Demonstrable DSP and sensor signal-processing experience (required): ADC interfacing, digital filtering, spectral analysis, feature extraction, and event/anomaly detection in noisy environments. Edge-ML classification experience is a plus.</li><li>Experience implementing embedded security features: secure boot (MCUboot or equivalent), signed firmware and secure update, hardware root of trust, TEE concepts, key provisioning and zeroization, encrypted communications, anti-rollback, and secure debug control.</li><li>SoC platform bring-up experience (NXP and/or NVIDIA platforms preferred): BSP integration, boot-chain validation, peripheral enablement, driver integration, and platform debugging; Linux/Yocto familiarity for host-side integration.</li><li>Low-power design experience: sleep-state management, power budgeting, and battery-backed always-on operation.</li><li>Familiarity with secure development practices: threat modeling, secure coding standards, and vulnerability assessment for embedded targets.</li><li>Proficiency with Git, CI/CD, automated testing, and HIL test setups; Docker familiarity is a plus.</li><li>Strong English communication skills and proven ability to work with hardware, security, manufacturing, QA, and systems teams under pressure.&nbsp;</li></ul><br><br><p>Education and Certification Requirements</p><br><br><ul><li>BSc or MSc in Electrical/Electronic Engineering, Computer Science, Embedded Systems, or a related discipline.</li><li>Exposure to cryptographic-module or product security certification work (ISO/IEC 19790, FIPS 140, Common Criteria, or IEC 62443) is a strong plus.</li><li>Basic understanding of flight-controller platforms (e.g., PX4/MAVLink) is a nice-to-have, not a requirement.</li><li>Contributions to open-source embedded or security projects (e.g., Zephyr, MCUboot) are valued.&nbsp;</li></ul><br><p>At TII, we help society to overcome its biggest hurdles through a rigorous approach to scientific discovery and inquiry, using state-of-the-art facilities and collaboration with leading international institutions. Our rigorous discovery and inquiry-based approach helps to forge new and disruptive breakthroughs in advanced materials, autonomous robotics, cryptography,&nbsp;digital security, directed energy, quantum computing and secure systems.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking an experienced Senior Structural Engineer to join our technical team and contribute to the successful delivery of high-rise, mixed-use, residential, commercial, and hospitality developments across the UAE.<br> The successful candidate will play a key role in structural coordination, technical review, and site support, ensuring that structural works are properly coordinated and executed in accordance with approved designs, specifications, and project requirements.<br> Private Health Insurance Performance Bonus Annual air ticket allowance Why Join IRTH Group?<br> At IRTH Group, we’re not just a company; we’re a family committed to building a brighter future together.<br> Guided by our core values of trust, strength, and agility , we empower individuals to thrive and succeed in a dynamic, collaborative environment.<br> We take pride in building great projects in prime locations, designed for future generations and offering exceptional value as an investor's product.<br> IRTH Group stands as a symbol of legacy, resilience, and vision.<br> Rooted in the foundation of a distinguished local family conglomerate, our privately held real estate investment platform draws strength from a heritage spanning over a century.<br> At IRTH Group, we are not just shaping the industry, we are setting the standard.<br> If you are driven by ambition, excellence, and the pursuit of legacy, this is where your journey begins.<br> Are you ready to be part of something extraordinary?<br> Lead and coordinate structural engineering activities across assigned projects, ensuring compliance with project requirements, design standards, and approved specifications.<br> Review, evaluate, and control structural submittals, including shop drawings, material submissions, method statements, and other technical documentation.<br> Manage and review BIM models and ensure accurate structural model coordination.<br> Participate in BIM coordination meetings and resolve clashes between structural and other disciplines.<br> Maintain model accuracy and integrity, ensuring updates accurately reflect approved design changes, site conditions, and subcontractors’ proposals.<br> Review and prepare structural calculation reports, design briefs, specifications, technical reports, and comprehensive engineering documentation.<br> Provide technical guidance and engineering support to site execution teams throughout the construction phase, addressing structural issues and ensuring proper implementation of approved designs.<br> Coordinate closely with consultant, subcontractors, and multidisciplinary teams to identify, resolve, and close structural design, technical, and coordination issues in a timely manner.<br> Support the Technical Manager in managing structural engineering deliverables and deadlines.<br> Promote effective communication between the technical office and site teams.<br> Visit construction sites when necessary to investigate structural or technical issues.<br> Qualifications Bachelor’s degree in civil engineering or Structural Engineering.<br> Master's Degree in Structural Engineering is an advantage.<br> Chartered Engineer or equivalent professional accreditation is preferred.<br> Dubai Municipality Structural Engineer License is an advantage.<br> Experience Minimum 10–15 years of structural engineering experience.<br> Minimum 5 years of UAE/GCC experience in Contracting technical team.<br> Proven experience in the technical department of execution high-rise, residential, commercial, hospitality, and mixed-use developments.<br> Technical Skills Excellent understanding of construction methodologies, buildability, and structural detailing.<br> Working knowledge of AutoCAD, Revit Structure, Navisworks, and BIM-based workflows.<br> Good knowledge of reinforced concrete and structural steel design.<br> Good Knowledge in structural analysis software such as ETABS, SAFE, SAP2000, and STAAD.<br>Pro. Working knowledge of AutoCAD, Revit Structure, Navisworks, and BIM-based workflows.<br> Thorough understanding of Dubai Municipality regulations, ACI, BS, Eurocodes, and relevant international standards.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>General Building Lead / Superintendent<br> Mechanical Equipment installation&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead Mechanical Engineer (Package Engineer - Static &amp; Rotating) to join its UAE Business Unit, based in Sharjah, UAE. This position will be seconded to the client and will support the delivery of key engineering projects.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><ul> <li>Lead the specification, design, and procurement of static and rotating equipment packages (e.g., compressors, pumps, valves, heat exchangers, flare packages, vessels, tanks, KODs, Drain pots).</li> <li>Ensure compliance with project requirements, industry standards (e.g., API, ASME), and client specifications.</li> <li>Supporting the Planning, scheduling and execution of discipline activities and deliverables, including manhour estimating and schedule preparation to support bid / tendering as required.</li> <li>Manage discipline work to the required schedule and manpower allocation, including requesting personnel as identified by the plan, and day-to-day supervision of discipline personnel on the project. This includes approval of timesheets, holiday approval and overtime approval where delegated.</li> <li>Manage and report progress of all Mechanical engineering and design budgets in line with contract requirements including weekly and cumulative productivity.</li> <li>To identify any areas of concern with respect to progress and / or quality and recommend corrective actions as required</li> <li>To attend weekly internal and external progress meetings and generate status reports for the Engineering / Project Manager</li> <li>To ensure all team members are competency assessed and maintain the competency of the team in line with company and Client requirements</li> <li>Define minimum acceptance criteria and Undertake pre qualification of third parties</li> <li>Liaise and engage with Licensors, Equipment Vendors and OEM’s as required to conclude the project deliverables in accordance with the project scope and provide third party budget costs for stage gate estimates as required.</li> <li>Define scope of work for 3rd Party sub contracts as required.</li> <li>Develop and review package specifications, data sheets, and technical bid evaluations.</li> <li>Select and design equipment to meet project requirements and optimize performance.</li> <li>Ensure equipment compatibility with existing infrastructure and systems.</li> <li>Collaborate with vendors to resolve technical issues</li> <li>Coordinate with the procurement team to ensure timely and cost-effective package delivery.</li> <li>Expedite vendor documentation, drawings, and delivery schedules.</li> <li>Ensure vendor compliance with project requirements and quality standards.</li> <li>Ensure seamless integration of equipment packages with overall project design.</li> <li>To co - ordinate with other disciplines during all stages of design development, construction, pre - commissioning, and start – up to ensure there is no conflict within the overall engineering design.</li> <li>To provide technical support to site in terms of material inspection, Factory Acceptance Testing etc</li> <li>To provide direction and guidance on technical queries relating to mechanical engineering and raise appropriate EQ’s / deviations</li> <li>To participate in all project safety and design reviews as necessary</li> <li>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule</li> <li>To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion whilst ensuring that the project is concluded within the boundary of the technical scope.</li> <li>Take ownership for Risk Identification, Assessment, Mitigation, Monitoring and Close Out for your respective discipline.</li> <li>To promote safe behavior at all times</li> <li>To provide sound technical advice and solutions to a diversity of technical problems within the discipline</li> <li>Promote and encourage smarter ways of working and champion continuous improvement within your department</li> <li>Ensure all lessons learnt are captured and shared</li> <li>Ensure equipment design and selection meet safety and quality standards.</li> <li>Participate in HAZOP and other safety reviews.</li> <li>Implement quality control procedures for package engineering</li></ul><br>Qualifications:<br><ul> <li>Degree in Mechanical Engineering (B.Sc./B.Eng./M.Sc.)</li> <li>Membership of a recognized professional institute preferred</li> <li>Minimum of 15 years' experience in the oil and gas industry</li> <li>Minimum of 15 years proven capability in an engineering design company</li> <li>Expertise in static and rotating equipment, package specification, and procurement.</li> <li>Experience of working with multi-national and multi-cultural project teams is strongly preferred</li> <li>Previous experience of working in the Middle East would be an advantage</li></ul> </div>