Branch Supervisor Jobs in UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To carry out effective and efficient repair and maintenance of customer vehicles following the approved manufacturers repair techniques</p><br><br>Responsibilities:<br><ul><li>Collect job orders and the necessary materials/ tools/ equipment, to carry out the repairs and maintenance on the customers’ vehicles in accordance with the manufacturers repair techniques.&nbsp;</li><li>Ensure accurate fault diagnosis and effective utilization of time allocated for the repairs. Report to Team Leader of any delays in repairs due to unavailability of parts or any other reason.&nbsp;</li><li>Ensure all additional repairs are authorized; parts are booked to the repair order. Incase of warranty repair/ parts exchange program, return removed part to the parts department in the same carton to facilitate audit processes and getting necessary credit if applicable. Incase of retail jobs keep the old parts inside the vehicle except batteries and parts which may cause stain on the interior trim/ carpet of the vehicle.&nbsp;</li><li>Service personal tools, keep the lifts and work area clean and comply with the health and safety standards.&nbsp;</li><li>Upgrade knowledge by regularly doing web based courses and by attending classroom trainings.&nbsp;</li><li>Keep all personal tools safe. Any breakages or accidents must be reported to the Team Leader / Supervisor immediately/Tool room for replacement.&nbsp;</li><li>Ensure efficiency and productivity is maintained above 100%.&nbsp;</li><li>Ensure proper clocking on/off in the system and do write up in the repair order as per the prescribed procedure.&nbsp;</li><li>Any unused parts must be returned or stored properly as per company procedure. Used parts must be disposed in an environment friendly manner.&nbsp;</li><li>To work extra hours incase the job needs to be completed to ensure customer satisfaction as per Team Leader’s requirement.</li></ul><br>Qualifications:<br><p>Education/Certification and Continued Education&nbsp;<br>• Diploma in Automotive Engineering&nbsp;<br>• Industrial Technical Institute ITI ( 2 years vocational course) - Certified Auto Technician Course<br>Years of Experience&nbsp;<br>• 2 to 3 years of experience as technician<br>&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position Summary <span></span><p>Academic Support Officers will serve as a pool to support PTLs, APC, Faculty, and students within a program relevant to academic-based administrative tasks.</p><br> <ul> <li>Familiarize with the resilient practices and approaches to adapt and adjust to the changing environment to protect and restore the organization’s resources and business continuation in times of any major change/ crisis.</li> <li>Provide academic and administrative support to the Program Team Leader, Academic Program Chair, Faculty, and students within the program, exercising confidentiality, tact, and diplomacy.</li> <li>Perform administrative tasks such as meeting scheduling, minute writing, room booking, travel arrangement, and stationery replenishment.</li> <li>Liaise with other departments within HCT, including ED /Director Office, Campus management, Student Engagement, Employability, System Registrar, HR, Procurement, Finance, IT, etc.</li> <li>Collate information from relevant stakeholders and prepare regular and ad-hoc reports and statistical analyses.</li> <li>Draft various reports, presentations, and email correspondence.</li> <li>Understand and implement related policies, procedures, regulations, and guidelines.</li> <li>Keep and maintain relevant records (such as student, faculty, program, and course records) and honor privacy, security, and confidentiality of sensitive information.</li> <li>Provide support related to academic services and student registration at peak times.</li> <li>Provide administrative support in course/program reviews for the Division.</li> <li>Provide administrative support in quality review/assessment and accreditation reports/applications.</li> <li>Provide administrative support in annual planning, budgeting, procurement, and expense tracking.</li> <li>Provide administrative support for assessment preparation and during FWA periods.</li> <li>Provide administrative support for KPI monitoring and reporting.</li> <li>Provide administrative support in market intelligence and research.</li> <li>Perform any other task assigned by the Supervisor.</li> </ul> <br><br>Requirements <span></span><p>Qualification and Experience</p><br> <p>A minimum of a Bachelor’s degree in a relevant field is required e.g. Business Administration.<br> • Full English proficiency is required. Arabic is desirable.<br> • Intermediate computer literacy is required e.g. MS Office.&nbsp;</p><br> <p>Minimum of 0-2 years of relevant work experience.</p><br> <p>• Excellent customer focus and ability to work in a positive manner with a variety of people (students, faculty, staff, and administrators).</p><br> <br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b><span>Posting Title: Dishwasher</span></b><br><br><b>Industry:</b> Hospitality<br><br><b>Salary:</b>&nbsp;AED 1100 to 1200 + Visa + Medical +accommodation+ food<br><br><b>Work Experience: 2</b>&nbsp;years<br><br><b>Summary:</b><br><br><span><span><span><span><span><span><span>We are currently looking for a <b>professional and well experienced Dishwasher</b> to join our high-end top class and well known&nbsp;<b>Restaurant in Al Ain/ Abu Dhabi</b>. The ideal candidate will be responsible for maintaining cleanliness in the kitchen, washing dishes and kitchen equipment, and supporting the kitchen team in maintaining a hygienic and organized work environment.</span></span></span></span><br><br><b>Responsibilities:</b><br><br></span></span></span></span><ul><li>Wash and sanitize dishes, plates, glasses, cutlery, and kitchen utensils.<br></li><li>Clean and maintain kitchen equipment and work areas.<br></li><li>Ensure all dishes are properly cleaned and stored.<br></li><li>Dispose of kitchen waste according to hygiene standards.<br></li><li>Assist kitchen staff with basic cleaning and preparation tasks when required.<br></li><li>Maintain cleanliness and hygiene in the dish washing area.<br></li><li>Follow food safety, health, and hygiene regulations.<br></li><li>Operate dish washing machines and cleaning equipment safely.<br></li><li>Report damaged or malfunctioning equipment to the supervisor.<br></li><li>Support the kitchen team during busy periods.<br></li></ul>Requirements<br><ul><li>Previous experience as a <b>Dishwasher, Kitchen Helper, or similar role</b> is preferred.<br></li><li>Basic knowledge of kitchen hygiene and sanitation.<br></li><li>Ability to work in a fast-paced kitchen environment.<br></li><li>Physically fit and able to stand for long hours.<br></li><li>Ability to handle cleaning chemicals and equipment safely.<br></li><li>Hardworking, reliable, and punctual.<br></li><li>Good teamwork and communication skills.<br></li><li>Willingness to work flexible shifts, weekends, and holidays.<br></li><li>Previous experience in a <b>&nbsp;restaurant</b> is an advantage.<br></li></ul><br><br><br><br><br><br><br><br><br><span>Requirements<span><span><span></span></span></span></span><ul><li>Minimum 1–3 years of proven experience in housekeeping or cleaning within a hospitality environment (hotels, resorts, or similar).<br></li><li>Strong attention to detail and commitment to maintaining high standards of cleanliness and hygiene.<br></li><li>Ability to work independently and as part of a team in a fast-paced environment.<br></li><li>Proficient in using standard cleaning equipment and chemical products safely and effectively.<br></li><li>Basic understanding of health, safety, and sanitation practices in hospitality settings.<br></li><li>Excellent interpersonal, communication, and organizational skills.<br></li><li>Willingness to work flexible shifts, including early mornings, evenings, weekends, and holidays.<br></li></ul><br><br><span>Benefits<b>Salary &amp; Benefits:</b><br><br>Salary . AED 1100 to 1200 + Visa + Medical+accommodation+ food<br><br></span><br> </div>

<p>Application invited immediately for an experienced sample coordinator for an organization based in Abu Dhabi UAE. We are looking for candidates who can provide a serious commitment of minimum 2 years.</p><br><ul><li><p>Responsible for the management of samples including scheduling /registrations and tracking. (Daily Sample collection assignment to the samplers according to the work schedules given by the sales representative)</p><br></li><li><p>Maintain the record of sampling plan including the monthly samples.</p><br></li><li><p>Coordinating between the client and the sale representative for details such as locations, Contact details, clarity of sample collection etc.</p><br></li><li><p>Daily monitoring and maintain the work log time sheet of samplers.</p><br></li><li><p>Handle complaints of sampling technicians and give them a solution to their encountering problems, further to the discussion with concern department Managers.</p><br></li><li><p>Responsible for organizing the adequate sampling tools in coordination with lab manager/ lab supervisor.</p><br></li><li><p>Responsible for dispatching the sampling bottles / Containers.</p><br></li><li><p>Responsible to completing the sampling schedules with in the time frame. (In such event of assistance required from a chemist or microbiologist for sampling, he have to coordinate with the lab manager for assistance)</p><br></li><li><p>Responsible to coordinate with clients in advance and scheduling the sample collections for both Dubai and Abu Dhabi Contracts.</p><br></li><li><p>Responsible for arranging the transportation of subcontracting samples or any other goods.</p><br></li><li><p>Responsible to coordinate with the administration department for vehicle arrangement.</p><br></li><li><p>Responsible for organizing monthly meetings with samplers and educate them with coordination with the quality.</p><br></li><li><p>Responsible to ensure the samplers have their safety PPE during the sampling</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><br></p><ul><li><p>Ready to join immediately<br></p></li><li><p>Minimum 1 years’ experience require<br></p></li><li><p>Fast Learner who is ready to invest additional time to learn and implement management requirements<br></p></li><li><p>Diploma / Bachelor’s Degree (Any)<br></p></li><li><p>Excellent communication skills with proficiency in English & Hindi.<br></p></li><li><p>Good computer literacy, fast typing skills, and proficiency in Microsoft Excel & Word.<br></p></li><li><p>Detail-oriented with strong organizational and multitasking abilities.<br></p></li><li><p>Prior consulting experience is an advantage.</p><br></li><li><p><strong>Seeking MALE candidates only. Only candidates residing in the UAE will be considered.</strong><br></p></li></ul>

<p>Application invited immediately for an experienced sample coordinator for an organization based in Abu Dhabi UAE. We are looking for candidates who can provide a serious commitment of minimum 2 years.</p><br><ul><li><p>Responsible for the management of samples including scheduling /registrations and tracking. (Daily Sample collection assignment to the samplers according to the work schedules given by the sales representative)</p><br></li><li><p>Maintain the record of sampling plan including the monthly samples.</p><br></li><li><p>Coordinating between the client and the sale representative for details such as locations, Contact details, clarity of sample collection etc.</p><br></li><li><p>Daily monitoring and maintain the work log time sheet of samplers.</p><br></li><li><p>Handle complaints of sampling technicians and give them a solution to their encountering problems, further to the discussion with concern department Managers.</p><br></li><li><p>Responsible for organizing the adequate sampling tools in coordination with lab manager/ lab supervisor.</p><br></li><li><p>Responsible for dispatching the sampling bottles / Containers.</p><br></li><li><p>Responsible to completing the sampling schedules with in the time frame. (In such event of assistance required from a chemist or microbiologist for sampling, he have to coordinate with the lab manager for assistance)</p><br></li><li><p>Responsible to coordinate with clients in advance and scheduling the sample collections for both Dubai and Abu Dhabi Contracts.</p><br></li><li><p>Responsible for arranging the transportation of subcontracting samples or any other goods.</p><br></li><li><p>Responsible to coordinate with the administration department for vehicle arrangement.</p><br></li><li><p>Responsible for organizing monthly meetings with samplers and educate them with coordination with the quality.</p><br></li><li><p>Responsible to ensure the samplers have their safety PPE during the sampling</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><br></p><ul><li><p>Ready to join immediately<br></p></li><li><p>Minimum 1 years’ experience require<br></p></li><li><p>Fast Learner who is ready to invest additional time to learn and implement management requirements<br></p></li><li><p>Diploma / Bachelor’s Degree (Any)<br></p></li><li><p>Excellent communication skills with proficiency in English & Hindi.<br></p></li><li><p>Good computer literacy, fast typing skills, and proficiency in Microsoft Excel & Word.<br></p></li><li><p>Detail-oriented with strong organizational and multitasking abilities.<br></p></li><li><p>Prior consulting experience is an advantage.</p><br></li><li><p><strong>Seeking MALE candidates only. Only candidates residing in the UAE will be considered.</strong><br></p></li></ul>

<ul><li><p>TO attain the basic required skill level for a Utility Operator on the Pot Line through on-the-job training. Toassist the Assistant Cell Operator, Cell Operator / Cell Technician in operating reduction cells to produce moltenaluminium effectively & efficiently.</p><p>2.KEY ACCOUNTABILITIES:</p><ul><li><p>Assists the PTM operator in changing anodes safely and to the required standard, by removing and replacingback pot shields, transferring anode reference mark, monitoring the pot voltage, activating/deactivating theanode set logic and anode dressing..</p></li></ul><p>•Assists and ensures that pot beam raising operation is performed as per procedure and in a safe manner.</p><p>•Prepares the tapping hole prior to metal tapping.</p><p>•Skims the crucible to remove dross.</p><p>•Performs metal and bath sampling for quality and chemistry control purposes.</p><p>•Assists the cell operator/ assistant cell operator in miscellaneous activities like housekeeping, bathtapping/pouring, material addition to pots, pot skimming and pot redressing.</p><p>•Assists in gutter and basement cleaning.</p><p>•Attends PTM (Pot Tending Machine) on-the-job training if required.</p><p>•Cleans crucible and siphon tips</p><p>•Attends anode effects efficiently aimed at lower PFC emissions</p><p>•Performs all other operational work activities as deemed necessary by the Shift-Supervisor (for example:cleans pot breaker tips, deck plates and bumper plates).</p><p>•Ensures pot shields and doors are properly placed and closed in order to reduce HF emissions.</p><p>•Maintains 5S Standards and general housekeeping</p><p>•Takes part in spotting and reporting hazards in order to reduce the incident frequency rate and aims for zeroLTI.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications:</p><p>•Secondary School Certificate</p><p>Minimum Experience:</p><p>•One year of experience in heavy industry is preferable.</p><p>Skills:</p><p>•Physical fitness and be prepared to work on one of the shift schedules operating within the Potrooms.</p><p>•Learning skills in order to understand the Aluminium Smelting Process.</p><p>•English communication skills</p><p>•Complete the training and acquire the skills to operate the following (depending upon the availability anddepartmental requirements): Pot Tending Machines, Anode Beam Raising Equipment and general Potroomtools, vehicles or equipment in use on the assigned Potline</p></li></ul>

<ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification</p></li></ul><p><strong>Minimum Experience:</strong></p><br><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li><li><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p></li></ul><p><strong>Skills:</strong></p><p><strong>&nbsp;</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul>

<ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimize workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li><li><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul><br><br><p><br></p></li></ul>

<p><strong>Principal Accountabilities:</strong> ▪ Prepares clinical and progress notes, coordinates services, work as liaison between treating physician and other personnel of changes in the client's condition and family members ▪ Counsels the clients and family in meeting nursing and related needs, participates in in- service programs, and supervises and teaches other nursing personnel <strong>Specific</strong> ▪ Monitoring and recording vital signs and reporting to the treating physicians for the abnormal values ▪ Administering prescribed medications ▪ Monitoring intravenous infusions and parenteral therapies ▪ Caring of clients with Tracheostomy, gastrostomy and colostomy ▪ Carrying out nursing care to clients with Pace maker, peritoneal dialysis , and clients on ventilator ▪ Delivering Nursing care of clients with hemiplegic, paraplegic, Bells palsy, cerebral palsy, terminally ill, and elderly etc. ▪ Caring new born, pre and post-partum mothers ▪ Caring of clients with physically challenged and those who need special care at home or at their educational facility ▪ Delivering simple exercises, helping in ambulation and accompanying clients to social gathering, hospitals, other treatment facilities and out doors ▪ Caring for the wound of the patient in order to prevent exacerbation of pressure ulcers ▪ Reporting and recording of medical events, procedures and other medical parameters ▪ Maintain records of patient care, condition, progress, and problems in order to report and discuss observations with a supervisor or case manager, or Medical Doctor.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education</strong></p><ul><li><p>Bachelor of Science in Nursing froman accredited school of nursing in home country</p></li><li><p>Active Basic Life Support&nbsp;training</p></li></ul><ul><li><p>Critical care&nbsp;qualification</p></li><li><p>Pediatric qualification&nbsp;(for pediatrics&nbsp;RN)</p></li><li><p>ACLS (for adult&nbsp;patients)</p></li><li><p>PALS (for pediatric&nbsp;patients)</p></li><li><p>Teaching and&nbsp;assessing</p></li></ul><p><strong>Experience</strong></p><ul><li><p>2 to 5 Years working experience asRN</p></li></ul><br><p><strong>Certification and Licensure</strong></p><ul><li><p>Current valid registration in country&nbsp;of training and/or country of last employment</p></li><li><p>Eligible for DOH / DHA / MOH&nbsp;licensing</p></li></ul><br><p><strong>Job Specific Knowledge and Skills</strong></p><ul><li><p>Homecare & Clinical Skills, Bedside Manner, Infection Control, Nursing Skills, Physiological Knowledge, Administering Medication, Medical Teamwork, Multi-tasking,&nbsp;Listening, Verbal Communication, Health Promotion and&nbsp;Maintenance</p></li></ul><ul><li><p>Able to speak&nbsp;Arabic</p></li></ul>

<br><br><br><ul><li><p>Supervise and manage joinery installation teams on-site, ensuring productivity, discipline, and high-quality workmanship.</p></li><li><p>Inspect and verify all joinery work against design specifications, technical drawings, and quality standards.</p></li><li><p>Coordinate daily site activities to ensure projects are completed according to schedule.</p></li><li><p>Maintain accurate site documentation, including daily logs, progress reports, and photographic records.</p></li><li><p>Coordinate with Interior Designers, Project Managers, Clients, subcontractors, and suppliers to resolve design queries and site issues.</p></li><li><p>Monitor project timelines, identify potential delays, and implement corrective actions.</p></li><li><p>Ensure compliance with health and safety regulations, site protocols, and WAVER quality standards.</p></li><li><p>Source, evaluate, and coordinate the procurement of joinery materials and components when required.</p></li><li><p>Train, mentor, and supervise site teams to improve performance and productivity.</p></li><li><p>Manage subcontractors and suppliers to ensure quality, timely delivery, and project success.</p></li><li><p>Conduct regular site inspections and oversee project handover upon completion.</p></li></ul><p>Requirements</p><ul><li><p>Minimum 3–5 years of experience in joinery supervision or site management within luxury interior fit-out projects.</p></li><li><p>Strong knowledge of joinery materials, finishes, installation techniques, and quality standards.</p></li><li><p>Ability to read and interpret technical drawings, shop drawings, CAD layouts, and design specifications.</p></li><li><p>Proven leadership experience managing installation teams and high-value projects.</p></li><li><p>Excellent planning, organizational, and problem-solving skills.</p></li><li><p>Strong communication skills in English. Arabic is an advantage.</p></li><li><p>Valid UAE Driving License (Mandatory).</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Experience with luxury residential, hospitality, or commercial interior fit-out projects.</p></li><li><p>Familiarity with site management software and digital documentation tools.</p></li><li><p>Knowledge of UAE construction standards and site safety regulations.</p></li></ul><p>Compensation & Benefits</p><ul><li><p>Competitive salary package based on experience.</p></li><li><p>Company vehicle and fuel allowance.</p></li><li><p>Medical insurance.</p></li><li><p>Annual leave and public holidays as per UAE Labour Law.</p></li><li><p>Professional development and training opportunities.</p></li><li><p>Career growth within a dynamic luxury-focused organization.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p> We are seeking an experienced Joinery Site Supervisor to lead and oversee all on-site joinery installation and execution activities. The successful candidate will ensure projects are completed safely, on time, within budget, and to the highest luxury craftsmanship standards.</p>

<ul><li><p>To perform a wide range of duties relating to the electrical installation, repair, maintenance and troubleshooting of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement.</p></li></ul><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities. Repairs and /or replaces required items and re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures & troubleshoots electrical failures of plant and equipment with (minimum or) no direction.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem.</p></li><li><p>Provides plant & equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma in relevant field.</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>A good knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools and should have good IT knowledge</p></li><li><p>Experience in installation & troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<ul><li><p>Lead, coach and support the service reception team, including Service Advisors, Cost Clerks and Receptionists, to deliver excellent customer service.</p></li><li><p>Create and maintain a customer-centric reception environment aligned with the company’s service values and standards.</p></li><li><p>Ensure accurate customer and vehicle information flow between the reception, workshop and support teams to achieve “Fix Right First Time” and on-time vehicle delivery.</p></li><li><p>Monitor daily service operations, work loading, staff schedules, attendance and shift handovers to ensure smooth and efficient service centre performance.</p></li><li><p>Review customer feedback, complaints and escalations, and work with the Aftersales Manager to implement continuous improvement actions.</p></li><li><p>Drive team performance against operational and financial KPIs, including revenue, margin, Net Promoter Score, customer satisfaction, on-time delivery and Fix Right First Time rates.</p></li><li><p>Maintain a clean, safe and well-organised customer waiting area and service reception in line with 5S and safety standards.</p></li><li><p>Conduct regular team briefings, performance reviews and training plans to support employee engagement, capability and service excellence.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong customer service mindset with the ability to create positive and professional customer experience.</p></li><li><p>Minimum 4-5 years’ experience in customer care, receptionist role, preferably in automotive industry.</p></li><li><p>Proven leadership skills with experience managing frontline or service reception teams. Strong communication, coordination and problem-solving skills.</p></li><li><p>Ability to manage daily operations, work schedules, attendance and team performance in a fast-paced environment.</p></li></ul><br><p><strong>What equips you for the role</strong></p><ul><li><p>Diploma or degree in Mechanical Engineering, Automotive, Hospitality or a related field.</p></li><li><p>More than 5 years’ experience in a Service Supervisor, Service Support Manager or similar frontline leadership role is preferred.</p></li><li><p>At least 3 years’ experience in a customer-facing automotive role.</p></li><li><p>Experience managing teams, improving customer satisfaction and working with operational KPIs.</p></li><li><p>Strong behavioral competencies include analytical thinking, focus, task orientation, communication and teamwork.</p></li><li><p>Proficiency in Microsoft Office applications, including Excel, Word and PowerPoint; knowledge of SAP is an advantage.</p></li><li><p>High attention to detail with the ability to ensure accurate customer, vehicle and service information.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>1.JOB PURPOSE:</p><p>TO attain the basic required skill level for a Utility Operator on the Pot Line through on-the-job training. Toassist the Assistant Cell Operator, Cell Operator / Cell Technician in operating reduction cells to produce moltenaluminium effectively &amp; efficiently.</p><p>2.KEY ACCOUNTABILITIES:</p><ul><li><p>Assists the PTM operator in changing anodes safely and to the required standard, by removing and replacingback pot shields, transferring anode reference mark, monitoring the pot voltage, activating/deactivating theanode set logic and anode dressing..</p></li></ul><p>•Assists and ensures that pot beam raising operation is performed as per procedure and in a safe manner.</p><p>•Prepares the tapping hole prior to metal tapping.</p><p>•Skims the crucible to remove dross.</p><p>•Performs metal and bath sampling for quality and chemistry control purposes.</p><p>•Assists the cell operator/ assistant cell operator in miscellaneous activities like housekeeping, bathtapping/pouring, material addition to pots, pot skimming and pot redressing.</p><p>•Assists in gutter and basement cleaning.</p><p>•Attends PTM (Pot Tending Machine) on-the-job training if required.</p><p>•Cleans crucible and siphon tips</p><p>•Attends anode effects efficiently aimed at lower PFC emissions</p><p>•Performs all other operational work activities as deemed necessary by the Shift-Supervisor (for example:cleans pot breaker tips, deck plates and bumper plates).</p><p>•Ensures pot shields and doors are properly placed and closed in order to reduce HF emissions.</p><p>•Maintains 5S Standards and general housekeeping</p><p>•Takes part in spotting and reporting hazards in order to reduce the incident frequency rate and aims for zeroLTI.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:</p><p>•Secondary School Certificate</p><p>Minimum Experience:</p><p>•One year of experience in heavy industry is preferable.</p><p>Skills:</p><p>•Physical fitness and be prepared to work on one of the shift schedules operating within the Potrooms.</p><p>•Learning skills in order to understand the Aluminium Smelting Process.</p><p>•English communication skills</p><p>•Complete the training and acquire the skills to operate the following (depending upon the availability anddepartmental requirements): Pot Tending Machines, Anode Beam Raising Equipment and general Potroomtools, vehicles or equipment in use on the assigned Potline</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Purpose<br><br><p><strong><span>Mechanic - Docking</span></strong><span> is responsible to assist Aircraft Technicians and Licensed Aircraft Engineers with the maintenance of Emirates and third-party aircraft, ensuring compliance with GCAA regulations within Docking station. </span></p><br><br><p><strong><span>In this role you will:</span></strong></p><br><br><ul><li><span>Assist senior staff in activities such as aircraft fuel handling, wheels &amp; breaks servicing, nitrogen recharging, engine servicing etc. as required, in order to provide essential support for the department operational activities.</span></li><li><span>Carry out basic support servicing and/or component replacements of EK and third-party aircraft as instructed and supervised by the Licensed Engineers.</span></li><li><span>Inspect all equipment before use to ensure that they are fully operational and inform Supervisor on duty of any faults to the workshop for the faults to be repaired.</span></li><li><span>Ensure tools, equipment and systems (including Ultramain) are well maintained in the relevant workplace.</span></li><li><span>Maintain and ensure the safety of self and others by taking safety precautions at all times, continuously monitoring the working area and taking corrective action to keep it clean and obstruction free to avoid any accidents.</span></li><li><span>Work in cleaning aircraft/engine parts in accordance with approved manual specifications. </span></li><li><span>Assist during push back operation to ensure that the push back procedure is carried out efficiently and safely. </span></li><li><span>Assist the Senior Mechanic/ Aircraft Engineer for snag rectification and component change, using special tools in order to make the aircraft fully operational to avoid delayed departures.</span></li></ul><br>Qualification<p><strong><span>To be considered for this role you must meet the following requirements: </span></strong></p><br><br><ul><li><span>Vocational/ National/ Higher National Diploma (12+2 or equivalent) or Apprenticeship in Mechanical, Electronic, Avionics or Aeronautical Engineering or equivalent training with a reputable airline or an approved maintenance organization.</span></li><li><span>Preferred experience in engineering environment.</span></li><li><span>Full awareness of safety procedures. </span></li></ul><br><br><br>Salary &amp; benefits<p><span>Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it’s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website </span><span>www.emirates.com/careers</span><span> .</span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span><b><u>General Overview:</u></b><br></span></span></p><br><p><span><span>We are hiring for our client, a leading insurance organization in the UAE, to appoint an experienced<b>AML Compliance Supervisor</b>. This is a rewarding opportunity for a compliance professional to play a critical role in strengthening the organization's AML/CFT framework while ensuring adherence to UAE regulatory requirements and industry best practices.<br></span></span></p><br><p><span><span>The successful candidate will support the implementation and oversight of AML, KYC, sanctions screening, and regulatory compliance activities, working closely with key stakeholders to foster a strong culture of governance, risk management, and financial crime prevention.<br></span></span></p><br><p><span><span><b><u>Key Responsibilities:</u></b><br></span></span></p><br><ul><li>Support the implementation and ongoing enhancement of the organization's AML/CFT framework in line with CBUAE regulations.<br></li><li>Oversee KYC, Customer Due Diligence (CDD), Enhanced Due Diligence (EDD), and periodic customer reviews.<br></li><li>Monitor AML controls across insurance operations, including premium payments, claims, refunds, cancellations, and third-party transactions.<br></li><li>Review and escalate suspicious activities, ensuring timely reporting in accordance with UAE AML regulations and internal procedures.<br></li><li>Manage sanctions screening activities and support compliance with UAE, UN, and international sanctions requirements.<br></li><li>Conduct AML risk assessments and support regulatory inspections, audits, and remediation activities.<br></li><li>Prepare AML dashboards, management reports, regulatory submissions, and compliance documentation.<br></li><li>Deliver AML guidance and awareness across underwriting, claims, operations, and other business functions.<br></li><li>Support the continuous improvement of AML policies, procedures, controls, and governance frameworks.<br></li></ul><p><span><span><b><u>Key Requirements:</u></b><br></span></span></p><br><ul><li>Bachelor's degree in Law, Finance, Accounting, Risk Management, or a related discipline.<br></li><li><b>4-7 years of AML/CFT compliance experience</b>within the insurance or financial services sector.<br></li><li>Strong knowledge of UAE AML/CFT regulations, CBUAE requirements, customer due diligence (CDD), enhanced due diligence (EDD), sanctions screening, and the goAML reporting framework.<br></li><li>Professional certifications such as<b>CAMS, ICA, ACAMS</b>, or equivalent are highly preferred.<br></li><li>Experience supporting regulatory audits, inspections, and compliance reporting.<br></li><li>Strong analytical, investigation, and risk assessment capabilities with excellent attention to detail.<br></li><li>Excellent communication, stakeholder management, and documentation skills.<br></li><li>High level of integrity, professionalism, and the ability to manage confidential and sensitive information.<br></li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Join <strong>Al-Futtaim Automotive</strong> as a <strong>Workshop Supervisor – Lexus Ras Al Khaimah</strong> and lead a team of skilled technicians in delivering exceptional workshop performance, operational excellence, and customer satisfaction.</p><p>This is a key leadership role responsible for driving productivity, ensuring vehicles are repaired right the first time, and delivering on-time service while maintaining the highest standards of quality, safety, and efficiency. You will play an important role in developing technical talent, optimizing workshop operations, and supporting Lexus's commitment to delivering an exceptional customer experience.</p><br><p><strong>What You Will Do</strong></p><ul><li><p>Lead and supervise the day-to-day workshop operations to achieve productivity, efficiency, and revenue targets</p></li><li><p>Drive the "Fix It Right" culture and ensure adherence to manufacturer and distributor technical standards</p></li><li><p>Monitor workshop KPIs, sold hours, utilization, productivity, and on-time delivery performance</p></li><li><p>Plan and allocate workloads effectively to maximize technician efficiency and workshop capacity</p></li><li><p>Ensure quality control standards are maintained and implement corrective actions where required</p></li><li><p>Coach, mentor, and support technicians through training and performance management</p></li><li><p>Manage warranty repair processes and ensure compliance with principal requirements</p></li><li><p>Oversee workshop tools, equipment, consumables, and inventory management</p></li><li><p>Lead continuous improvement initiatives and operational enhancement projects</p></li><li><p>Ensure compliance with HSSE requirements, company policies, and operational standards</p></li></ul><br><p><strong>Required Skills to be Successful</strong></p><ul><li><p>Strong leadership and team supervision skills</p></li><li><p>Deep understanding of automotive workshop operations and dealership processes</p></li><li><p>Proven ability to drive productivity, efficiency, and customer satisfaction</p></li><li><p>Strong analytical and KPI management capabilities</p></li><li><p>Excellent communication and stakeholder management skills</p></li><li><p>Experience in quality control, warranty management, and workshop planning</p></li><li><p>Strong attention to operational excellence and continuous improvement</p></li><li><p>Customer-focused mindset with a passion for delivering premium service</p></li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Diploma or Bachelor's Degree in Automobile or Mechanical Engineering</p></li><li><p>Relevant automotive technical certifications</p></li><li><p>Minimum 5 years of experience within automotive workshop operations</p></li><li><p>Previous experience in a workshop supervisory or team leadership role</p></li><li><p>Strong knowledge of dealership operations, workshop KPIs, and technical processes</p></li><li><p>Experience using ERP systems and Microsoft Office applications</p></li><li><p>Proven ability to lead teams and deliver operational results</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Principal Accountabilities:</strong> ▪ Prepares clinical and progress notes, coordinates services, work as liaison between treating physician and other personnel of changes in the client's condition and family members ▪ Counsels the clients and family in meeting nursing and related needs, participates in in- service programs, and supervises and teaches other nursing personnel <strong>Specific</strong> ▪ Monitoring and recording vital signs and reporting to the treating physicians for the abnormal values ▪ Administering prescribed medications ▪ Monitoring intravenous infusions and parenteral therapies ▪ Caring of clients with Tracheostomy, gastrostomy and colostomy ▪ Carrying out nursing care to clients with Pace maker, peritoneal dialysis , and clients on ventilator ▪ Delivering Nursing care of clients with hemiplegic, paraplegic, Bells palsy, cerebral palsy, terminally ill, and elderly etc. ▪ Caring new born, pre and post-partum mothers ▪ Caring of clients with physically challenged and those who need special care at home or at their educational facility ▪ Delivering simple exercises, helping in ambulation and accompanying clients to social gathering, hospitals, other treatment facilities and out doors ▪ Caring for the wound of the patient in order to prevent exacerbation of pressure ulcers ▪ Reporting and recording of medical events, procedures and other medical parameters ▪ Maintain records of patient care, condition, progress, and problems in order to report and discuss observations with a supervisor or case manager, or Medical Doctor. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education</strong></p><ul><li><p>Bachelor of Science in Nursing froman accredited school of nursing in home country</p></li><li><p>Active Basic Life Support&nbsp;training</p></li></ul><ul><li><p>Critical care&nbsp;qualification</p></li><li><p>Pediatric qualification&nbsp;(for pediatrics&nbsp;RN)</p></li><li><p>ACLS (for adult&nbsp;patients)</p></li><li><p>PALS (for pediatric&nbsp;patients)</p></li><li><p>Teaching and&nbsp;assessing</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>2 to 5 Years working experience asRN</p></li></ul><br><p><strong>Certification and Licensure</strong></p><ul><li><p>Current valid registration in country&nbsp;of training and/or country of last employment</p></li><li><p>Eligible for DOH / DHA / MOH&nbsp;licensing</p></li></ul><br><p><strong>Job Specific Knowledge and Skills</strong></p><ul><li><p>Homecare &amp; Clinical Skills, Bedside Manner, Infection Control, Nursing Skills, Physiological Knowledge, Administering Medication, Medical Teamwork, Multi-tasking,&nbsp;Listening, Verbal Communication, Health Promotion and&nbsp;Maintenance</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Providing legal opinions on matters referred to the department and offering advice regarding them.</p></li><li><p>Managing the department's organizational units, monitoring their performance, and preparing reports to prevent duplication of objectives and tasks among them.</p></li><li><p>Preparing the proposed strategic and operational plan for the department, developing work-related performance indicators, and working to achieve them.</p></li><li><p>Supervising the preparation of legal studies, agreements, and organizational regulations related to the entity's work.</p></li><li><p>Supervising the preparation of memoranda and documentation for legal cases in which the entity is a party, and following up on their progress in coordination with the relevant authorities.</p></li><li><p>Supervising the preparation of all legal statements regarding consultations and inquiries referred to the administration and approving them.</p></li><li><p>Supervising the work of the Violations and Grievances Committees, studying grievances and complaints on matters referred by the competent authorities within the scope of the entity's responsibilities.</p></li><li><p>Supervising the preparation of contracts and their drafts referred from the competent authorities.</p></li><li><p>Supervising the preparation and review of memoranda of proposal to the Council of Ministers or the Ministerial Council for Services regarding the initiatives and legislation of the federal entity.</p></li><li><p>Supervising the drafting of draft laws, decisions, and circulars related to the work of the entity.</p></li><li><p>Coordinating with the State Cases Department in advocacy.</p></li><li><p>Regularly reviewing performance indicators, achievement rates, and the performance evaluation of department staff, and preparing and submitting the department's annual report to senior management.</p></li><li><p>Strengthening relationships with external partners to establish strategic partnerships, developing and motivating internal partners, and managing change to ensure efficiency and effectiveness.</p></li><li><p>Providing necessary support to the direct supervisor and performing any other assigned tasks.</p></li><li><p>Monitoring, evaluating, and improving administrative processes such as planning, budgeting, reporting, and service delivery.</p></li><li><p>Establishing internal plans to develop a team-building culture and continuous learning to ensure the highest quality of work.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>PhD in Law or Master of Law or Bachelor of Law</p><p>Experience - 10+ years</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant. Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible. Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner. Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries. Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems. Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans. Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges. Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification Minimum Experience: Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant) Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls Skills: Familiar with all mechanical maintenance tools Knowledge of PCs, Computer literacy is essential Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard Excellent interpersonal skills and assertiveness Team work (including shift work is also essential) Self-motivation &amp; dedication Work in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>TO attain the basic required skill level for a Utility Operator on the Pot Line through on-the-job training. Toassist the Assistant Cell Operator, Cell Operator / Cell Technician in operating reduction cells to produce moltenaluminium effectively &amp; efficiently.</p><p>2.KEY ACCOUNTABILITIES:</p><ul><li><p>Assists the PTM operator in changing anodes safely and to the required standard, by removing and replacingback pot shields, transferring anode reference mark, monitoring the pot voltage, activating/deactivating theanode set logic and anode dressing..</p></li></ul><p>•Assists and ensures that pot beam raising operation is performed as per procedure and in a safe manner.</p><p>•Prepares the tapping hole prior to metal tapping.</p><p>•Skims the crucible to remove dross.</p><p>•Performs metal and bath sampling for quality and chemistry control purposes.</p><p>•Assists the cell operator/ assistant cell operator in miscellaneous activities like housekeeping, bathtapping/pouring, material addition to pots, pot skimming and pot redressing.</p><p>•Assists in gutter and basement cleaning.</p><p>•Attends PTM (Pot Tending Machine) on-the-job training if required.</p><p>•Cleans crucible and siphon tips</p><p>•Attends anode effects efficiently aimed at lower PFC emissions</p><p>•Performs all other operational work activities as deemed necessary by the Shift-Supervisor (for example:cleans pot breaker tips, deck plates and bumper plates).</p><p>•Ensures pot shields and doors are properly placed and closed in order to reduce HF emissions.</p><p>•Maintains 5S Standards and general housekeeping</p><p>•Takes part in spotting and reporting hazards in order to reduce the incident frequency rate and aims for zeroLTI.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:</p><p>•Secondary School Certificate</p><p>Minimum Experience:</p><p>•One year of experience in heavy industry is preferable.</p><p>Skills:</p><p>•Physical fitness and be prepared to work on one of the shift schedules operating within the Potrooms.</p><p>•Learning skills in order to understand the Aluminium Smelting Process.</p><p>•English communication skills</p><p>•Complete the training and acquire the skills to operate the following (depending upon the availability anddepartmental requirements): Pot Tending Machines, Anode Beam Raising Equipment and general Potroomtools, vehicles or equipment in use on the assigned Potline</p></li></ul><p></p></section>