Laboratory Technician Jobs in UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Review project specifications, drawings, and material requirements to identify suitable materials for projects. Research, evaluate, and recommend construction and fit-out materials based on quality, performance, cost, and availability. Prepare and submit material submittal, technical data sheets, samples, and compliance documents for consultant/client approval. Coordinate with suppliers, manufacturers, consultants, and internal teams for material approvals. Verify material compliance with project specifications, international standards, and UAE regulations. Conduct material inspections and quality checks upon delivery to ensure compliance. Maintain records of approved materials, samples, test certificates, and technical documentation. Support procurement teams in supplier evaluation, technical comparisons, and material sourcing. Monitor material performance and resolve technical issues related to materials during project execution. Coordinate with site and production teams to ensure correct material usage and installation methods. Assist in value engineering initiatives by recommending alternative materials without compromising quality. Ensure materials meet sustainability, durability, safety, and environmental requirements. Prepare material reports and maintain material approval trackers. Requirements Bachelor's Degree in Materials Engineering, Civil Engineering, Construction Engineering, or a related discipline. Minimum 5–8 years of experience in material engineering, construction, or interior fit-out projects. Experience working with consultants, contractors, and suppliers in the UAE. Knowledge of luxury hospitality and bespoke interior fit-out materials. Experience with quality control procedures and material testing requirements. Benefits As per industry standards</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical expertise in all Instrumentation design&nbsp;</li> </ul><br> <ul> <li>Ensure design and engineering compliance with relevant codes and ADNOC standards&nbsp;</li> </ul><br> <ul> <li>Coordinate, Monitor and handle Instrumentation design and engineering with EPC Contractor as per project expectation and complete the same within the time frame&nbsp;</li> </ul><br> <ul> <li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp; &nbsp;</li> </ul><br> <ul> <li>Perform regular and timely technical reviews of Instrumentation Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.&nbsp;</li> </ul><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p><strong>Job Purpose</strong>&nbsp;</p><p>We are looking for a detail-oriented <strong>Technical Support & Estimation Engineer </strong>to lead the preparation of high-quality techno-commercial proposals for Fire & Life Safety projects. You will act as the vital link between our sales team and our engineering department, ensuring that every project proposal is technically accurate, compliant with <strong>UAE Fire & Life Safety Codes</strong>, and commercially competitive.&nbsp;</p><p><strong>Key Responsibilities</strong>&nbsp;</p><ul><li><p><strong>Techno-Commercial Proposals:</strong> Prepare and submit comprehensive technical and commercial bids/quotations, ensuring alignment with client requirements and company profit margins.&nbsp;</p></li></ul><ul><li><p><strong>Engineering Calculations:</strong> Perform accurate load calculations, battery backup calculations, cable sizing, and hydraulic calculations (as applicable) for fire protection systems.&nbsp;</p></li></ul><ul><li><p><strong>Technical Compliance:</strong> Interpret complex tender documents, drawings, and specifications to ensure proposals meet DCD (Dubai Civil Defence) and NFPA standards.&nbsp;</p></li></ul><ul><li><p><strong>Estimation & BoQ:</strong> Review Bills of Quantities (BoQ) and project scope, identifying cost-effective materials and labor requirements for accurate project costing.&nbsp;</p></li></ul><ul><li><p><strong>Technical Support:</strong> Serve as the technical point of contact for clients during the pre-sales phase, explaining system solutions, answering technical queries, and attending pre-bid meetings.&nbsp;</p></li></ul><ul><li><p><strong>Collaboration:</strong> Coordinate with vendors and procurement teams to obtain competitive material pricing and lead times for bid submissions.&nbsp;</p></li></ul><ul><li><p><strong>Market Intelligence:</strong> Stay updated on the latest fire safety products and competitor pricing to ensure our proposals remain market-competitive.&nbsp;</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Education:</strong> Bachelor’s degree /Diploma in Electrical, Electronics, or Mechanical Engineering.&nbsp;</p></li></ul><ul><li><p><strong>Experience:</strong> 0-2 years of experience in the UAE Fire & Life Safety industry, with a focus on tendering and proposal engineering.&nbsp;</p></li></ul><ul><li><p><strong>Technical Proficiency:</strong>&nbsp;</p></li></ul><ul><li><p>Proficiency in <strong>AutoCAD</strong> and MS Office (Excel is critical for cost estimation), Plan swift&nbsp;&nbsp;</p></li></ul><ul><li><p>Strong ability to perform technical calculations for fire alarms, suppression systems, and pump sets.&nbsp;</p></li></ul><ul><li><p>In-depth knowledge of <strong>UAE Fire & Life Safety Code of Practice</strong> and NFPA standards.&nbsp;</p></li></ul><ul><li><p><strong>Commercial Acumen:</strong> Proven ability to translate technical specifications into compelling commercial offers.&nbsp;</p></li></ul><ul><li><p><strong>Communication:</strong> Excellent written and verbal English skills; ability to draft professional technical correspondences.Technical Support Engineer&nbsp;</p></li></ul><ul><li><p><strong>Soft Skills:</strong> Strong analytical mindset, ability to work under strict tender deadlines, and high attention to detail.&nbsp;</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Required for HIGH-RISE building projects.</strong> &nbsp; <strong>Job Summary</strong> The Senior Mechanical Engineer is responsible for leading and managing mechanical engineering activities on construction projects, ensuring proper planning, execution, testing, and commissioning of mechanical systems and equipment in compliance with project specifications, approved drawings, applicable standards, quality requirements, and HSE practices. The role provides technical leadership, coordinates with stakeholders, and resolves complex engineering and site issues to achieve project objectives. <strong>Key Responsibilities</strong> * Lead and oversee installation, testing, pre-commissioning, and commissioning of mechanical equipment and systems. * Review and approve project specifications, drawings, shop drawings, material submittals, and technical documents to ensure compliance with scope and contract requirements. * Plan mechanical work activities and sequencing, ensuring availability of approved drawings, materials, equipment, and resources to meet project schedules. * Prepare, manage, and close Technical Queries (TQs/RFIs), deviations, concessions, waiver requests, and exemption lists. * Perform and review material take-offs (MTOs) and provide technical input to procurement and planning teams. * Coordinate with project teams, clients, consultants, subcontractors, vendors, and Third-Party Inspectors (TPI) to resolve technical and execution issues. * Identify scope changes or variations related to mechanical works and support technical discussions and agreements. * Prepare, review, and implement project procedures, method statements, Inspection and Test Plans (ITPs), and work instructions. * Provide onsite technical supervision and guidance during construction, installation, testing, and commissioning phases. * Monitor mechanical work progress, approvals, inspections, and readiness for handover. * Lead preparation of punch lists, mechanical completion, and close-out documentation. * Ensure compliance with applicable international codes and standards (ASME, API, AWS, ASTM, or equivalent). * Mentor junior engineers and support their technical development. * Ensure all mechanical activities comply with project HSE requirements, quality standards, and approved work practices. <strong>Required Qualifications &amp; Competencies</strong> * Bachelor’s degree (BE / B.Tech) in Mechanical Engineering. * 10+ years experience in mechanical engineering roles within construction projects (preferable high-rise building projects). * Strong expertise in mechanical systems, equipment installation, and commissioning practices. * Proven ability to lead site activities and manage multidisciplinary coordination. * Strong understanding of international mechanical codes and standards relevant to project scope. * Proficient in reviewing and approving shop drawings and as-built drawings. * Excellent leadership, coordination, and communication skills. * Strong knowledge of construction HSE requirements, work practices, and quality systems. * Ability to manage multiple priorities in complex, fast-paced project environments. </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are seeking a collaborative, technically skilled, and detail-oriented individual to join our organisation as a Design Engineer (Fire Protection Systems). This is an excellent opportunity for an innovative engineer to design and deliver cutting-edge fire protection solutions for commercial, industrial, and residential projects. The successful candidate will play a key role in developing compliant system designs, supporting project execution, and ensuring our fire safety solutions consistently exceed client expectations and regulatory standards. This position is ideal for someone passionate about fire safety engineering, eager to stay at the forefront of industry developments, and committed to delivering project excellence within a supportive team environment. </p><br><br>Key Responsibilities – Fire Protection Design, System Engineering<ul> <li>Produce detailed fire protection system designs, including layout drawings, specifications, and hydraulic calculations for sprinklers, alarms, suppression systems, and hydrants.</li> <li>Interpret client requirements, building codes, and relevant fire safety standards to develop compliant, cost-effective, and robust fire protection solutions.</li> <li>Collaborate closely with clients, consultants, architects, and contractors throughout the design and project lifecycle to ensure alignment, technical accuracy, and timely delivery.</li> <li>Prepare and review technical documentation, including design reports, datasheets, bill of materials, and compliance submissions for authority approvals.</li> <li>Support project managers and installation teams by providing engineering input during procurement, construction, and commissioning phases.</li> <li>Conduct technical reviews, design risk assessments, and site visits to resolve technical queries and verify installation quality as per design intent.</li> <li>Stay up to date with the latest codes, standards (e.g., NFPA, BS, EN), and technological advancements in fire protection systems to champion continuous improvement and innovation.</li> </ul>Required Skills – Fire Protection Design, Engineering Software, and Team Collaboration<ul> <li>Proven experience in fire protection system design, including the use of AutoCAD, Revit, or similar engineering design software.</li> <li>Strong knowledge of relevant fire safety codes, standards, and regulations (NFPA, British Standards, local codes, etc.).</li> <li>Excellent analytical and problem-solving skills with a meticulous approach to technical detail and design accuracy.</li> </ul><br>Qualifications &amp; Experience – Fire Protection Engineering, System Design, and Building Services<ul> <li>Bachelor’s degree in Fire Protection Engineering, Mechanical Engineering, Building Services Engineering, or a related technical field is required.</li> <li>Minimum of 3 years’ experience in fire protection system design within the construction, building services, or consultancy sector.</li> </ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st&nbsp;largest global architecture firm and the #1 Firm in the Middle East Region in their 2024 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span>We are seeking an experienced Lead Structural Engineer – Design Review with a very strong background in steel structures and extensive experience in structural design and independent technical design review. The ideal candidate will have significant experience with complex and advanced structural systems, particularly steel structures, and will be capable of leading high-level design reviews for major building projects.</span></p><br><p><span>Location: Abu Dhabi or Dubai, UAE</span></p><br><span>Key Responsibilities</span><ul><li><span>Lead independent technical design reviews of complex steel and reinforced concrete building structures.</span></li><li><span>Provide expert assessment of advanced steel structural systems, including long-span structures, special and complex connections, composite systems, steel trusses, and atypical structural configurations.</span></li><li><span>Conduct independent technical assessments comparable to CAT-2/CAT-3 design reviews, including performing self-check calculations and verifying the safety, stability, and compliance of structural designs.</span></li><li><span>Identify and document required design modifications and provide technical recommendations, including certification confirming the design is safe and compliant where required.</span></li><li><span>Review structural calculations, drawings, specifications, design assumptions, and supporting technical documentation.</span></li><li><span>Assess soil–structure interaction (SSI) assumptions, settlement predictions, lateral soil pressure considerations, and the compatibility between structural and geotechnical design inputs.</span></li><li><span>Review and assess façade structural systems, including unitized/stick systems, steel-supported façades, tension structures, and cladding support frames.</span></li><li><span>Ensure structural designs comply with applicable international standards, including SBC, AISC, ASCE, ACI, BS/Eurocodes, IBC, and ASTM.</span></li><li><span>Prepare detailed design review reports, technical memoranda, correspondence, and technical recommendations.</span></li><li><span>Provide technical support to the client during tendering, construction, design development, and value engineering stages.</span></li><li><span>Review proposed design changes and value engineering solutions to ensure structural safety, compliance, and constructability.</span></li><li><span>Coordinate with multidisciplinary teams, consultants, contractors, and other stakeholders to resolve complex structural design and interface issues.</span></li><li><span>Provide technical leadership and guidance on structural engineering matters throughout the project lifecycle.</span></li></ul> <br><strong>Qualifications</strong><br><span>Qualifications &amp; Experience</span><ul><li><span>Bachelor’s Degree in Civil or Structural Engineering is required.</span></li><li><span>Master’s Degree in Structural Engineering or a related discipline is highly preferred.</span></li><li><span>Minimum 20 years of professional experience in structural engineering, with a strong combination of structural design and design review experience.</span></li><li><span>Extensive experience in the design and review of steel and reinforced concrete buildings, with particularly strong expertise in steel structures.</span></li><li><span>Minimum 15 years of experience in a consultancy environment is preferred.</span></li><li><span>Previous experience in a senior/lead structural engineering position within the last 7 years will be highly advantageous.</span></li><li><span>Proven experience undertaking independent technical/design reviews, preferably CAT-2/CAT-3 or equivalent.</span></li><li><span>Chartered Engineer (CEng – UK) and/or Professional Engineer (PE – USA) is required.</span></li><li><span>Strong knowledge of international structural design codes and standards, including SBC, AISC, ASCE, ACI, BS/Eurocodes, IBC, and ASTM.</span></li><li><span>Strong analytical, technical report writing, communication, and stakeholder management skills.</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Engineering Manager - Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Engineering Manager </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Engineering Manager is responsible for leading and managing all engineering activities for ADNOC Offshore projects, ensuring that engineering deliverables are completed safely, on schedule, within budget, and in compliance with ADNOC specifications, international standards, and project requirements. The role oversees multidisciplinary engineering teams and provides technical leadership throughout FEED, Detailed Engineering, Procurement, Construction, Commissioning, and Start-up phases.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Engineering Management</b></p><br><br><ul><li>Lead and manage all engineering disciplines including Process, Mechanical, Piping, Civil/Structural, Electrical, Instrumentation, Telecom, and HSE.</li><li>Develop and implement engineering execution plans aligned with project objectives.</li><li>Ensure engineering deliverables are completed according to project schedules and quality requirements.</li><li>Coordinate engineering interfaces between EPC contractor, ADNOC Offshore, PMC, vendors, and subcontractors.</li><li>Monitor engineering progress and implement corrective actions when required.</li></ul><p><b>Technical Leadership</b></p><br><br><ul><li>Review and approve engineering designs, calculations, specifications, datasheets, and technical reports.</li><li>Ensure compliance with ADNOC Offshore standards, UAE regulations, international codes, and industry best practices.</li><li>Resolve major technical issues and provide engineering solutions to support project execution.</li><li>Drive value engineering and optimization initiatives.</li></ul><p><b>Project Coordination</b></p><br><br><ul><li>Work closely with Project Management, Procurement, Construction, and Commissioning teams.</li><li>Participate in project reviews, HAZID, HAZOP, SIL, Design Reviews, and Constructability Reviews.</li><li>Support procurement activities including technical bid evaluations and vendor document reviews.</li><li>Ensure design deliverables support efficient construction and commissioning activities.</li></ul><p><b>Stakeholder Management</b></p><br><br><ul><li>Act as the primary engineering focal point for ADNOC Offshore and Project Management Consultant (PMC).</li><li>Conduct engineering progress meetings with clients, consultants, and contractors.</li><li>Manage technical communications, engineering change requests, and design clarifications.</li></ul><p><b>Quality &amp; Compliance</b></p><br><br><ul><li>Ensure engineering activities comply with ADNOC Codes of Practice, international standards (API, ASME, IEC, ISO, NFPA, etc.), and project specifications.</li><li>Implement quality assurance and quality control procedures throughout the engineering lifecycle.</li><li>Monitor engineering KPIs and ensure lessons learned are captured and implemented.</li></ul><p><b>Risk Management</b></p><br><br><ul><li>Identify engineering risks and develop mitigation plans.</li><li>Manage technical deviations, concessions, and Management of Change (MOC) processes.</li><li>Support project risk assessments and ensure engineering risks are adequately addressed.</li></ul><p><b>Team Leadership</b></p><br><br><ul><li>Lead multidisciplinary engineering teams and engineering coordinators.</li><li>Mentor and develop engineers to enhance technical competency and project performance.</li><li>Allocate resources effectively to meet project priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor’s Degree in Engineering (Mechanical, Electrical, Civil, Chemical, or related discipline).</li><li>Master's Degree is an advantage.</li><li>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent certification preferred.</li></ul><p><b>Experience</b></p><br><br><ul><li>Minimum <b>15–20 years</b> of engineering experience in Oil &amp; Gas, with at least <b>8–10 years in Engineering Management roles</b>.</li><li>Extensive ADNOC Offshore, Saudi Aramco, QatarEnergy, or major international offshore project experience.</li><li>Proven experience in EPC/EPCM execution of offshore platforms, subsea facilities, pipelines, and brownfield projects.</li><li>Experience managing large multidisciplinary engineering teams.</li></ul><br><p><b>Technical Knowledge</b></p><br><br><p><b>Mandatory</b></p><br><br><ul><li>ADNOC Offshore Engineering Standards and Specifications.</li><li>Offshore Oil &amp; Gas facilities design and execution.</li><li>FEED, Detailed Engineering, EPC/EPCM project execution.</li><li>API, ASME, ASTM, NFPA, IEC, ISO and international engineering standards.</li><li>HAZOP, HAZID, SIL, Risk Assessment and Functional Safety processes.</li><li>Engineering software and document management systems.</li></ul><p><b>Preferred</b></p><br><br><ul><li>Experience with:<ul><li>AVEVA Engineering</li><li>SmartPlant (SP3D)</li><li>E3D</li><li>AutoCAD</li><li>Navisworks</li><li>Primavera P6</li><li>Aconex/EDMS</li></ul></li></ul><br><p><b>Key Competencies</b></p><br><br><ul><li>Engineering Leadership</li><li>Project Execution Excellence</li><li>Stakeholder Management</li><li>Client Relationship Management</li><li>Strategic Planning</li><li>Technical Decision Making</li><li>Risk Management</li><li>Team Development</li><li>Problem Solving</li><li>Communication &amp; Presentation Skills</li><li>Cost and Schedule Management</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking a Project Engineer – Offshore &amp; Subsea to join our client's offshore project delivery team based in Abu Dhabi, UAE. This is a permanent office-based role with offshore and field travel as required throughout the project cycle, supporting the engineering delivery of offshore survey, subsea, and marine projects from execution planning through to project close-out.<br></p><br><p>You will be responsible for providing technical engineering support across multiple projects, ensuring engineering deliverables, technical documentation, project coordination, and offshore readiness are delivered in accordance with client requirements, industry standards, and project schedules. Working closely with the Project Manager, discipline engineers, offshore personnel, procurement, vendors, and subcontractors, you will help ensure projects are executed safely, efficiently, and to the highest technical standards.<br></p><br><span>Key Responsibilities</span><br>- Develop, review, and maintain project engineering documentation including technical specifications, engineering calculations, method statements, work packs, and project procedures.<br><br>- Support the preparation and maintenance of project execution plans, engineering schedules, deliverable registers, technical trackers, and project documentation throughout the project lifecycle.<br><br>- Coordinate engineering activities with internal discipline engineers, offshore teams, subcontractors, vendors, and clients to ensure timely delivery of engineering outputs and resolution of technical queries.<br><br>- Review engineering deliverables to ensure compliance with project specifications, client requirements, company standards, and applicable industry codes.<br><br>- Manage engineering change control, Requests for Information (RFIs), technical queries, and deviation registers while ensuring accurate documentation and timely approvals.<br><br>- Assist with material take-offs, procurement support, technical bid evaluations, vendor document reviews, and equipment selection to meet project requirements.<br><br>- Support offshore campaign planning by participating in pre-mobilisation engineering reviews, vessel readiness assessments, equipment verification, and technical risk mitigation activities.<br><br>- Prepare engineering progress reports, technical presentations, and project updates for internal management meetings and client progress reviews.<br><br>- Monitor engineering deliverables, identify technical risks and interface issues, and recommend practical solutions to maintain project schedules and quality objectives.<br><br>- Maintain engineering records, project documentation, and lessons-learned registers while contributing to continuous improvement initiatives and engineering best practices.<br><br><br><span>Requirements- Bachelor's Degree in Mechanical, Structural, Civil, Marine, Subsea, or a related Engineering discipline.<br><br>- 4–8 years of project engineering experience within offshore, subsea, marine, or offshore survey environments.<br><br>- Strong understanding of offshore engineering principles, subsea systems, marine operations, and offshore installation methodologies.<br><br>- Experience preparing engineering documentation, technical specifications, work packs, method statements, and engineering deliverables.<br><br>- Knowledge of engineering change management, RFI processes, technical deviations, procurement support, and vendor document reviews.<br><br>- Experience coordinating multidisciplinary engineering teams, offshore personnel, vendors, and subcontractors throughout project execution.<br><br>- Strong planning, technical coordination, analytical, and problem-solving skills with the ability to manage multiple engineering priorities.<br><br>- Excellent communication, stakeholder management, and technical reporting skills.<br><br>- Proficiency in Microsoft Office and engineering documentation management systems.<br><br>- Experience supporting ADNOC or other regional offshore energy projects is highly desirable.<br><br><span>CERTIFICATIONS (Please attach below certificates)</span><br>- BOSIET or HUET — must be valid and current. Candidates with an expired BOSIET/HUET will not be shortlisted. Please attach a copy of your certificate with your application.<br><br>- ADNOC Facility Access Approval — held or a clearly documented ability to obtain. Candidates who have previously held ADNOC access or worked on ADNOC-approved projects are at a significant advantage.<br><br>- Relevant engineering or discipline-specific certifications are advantageous.<br><br>- Knowledge of IMCA guidelines and offshore engineering best practices is advantageous.<br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br>- Permanent employment with a leading offshore survey and subsea engineering organization<br><br>- Opportunity to support major offshore survey, hydrographic, and subsea projects across the UAE and the wider region<br><br>- Exposure to advanced offshore survey technologies, equipment management, mobilisation planning, and asset lifecycle processes<br><br>- Opportunity to develop expertise in survey systems, calibration, maintenance, and offshore project support within a multidisciplinary environment<br><br>- Long-term career growth and progression within a stable organization delivering complex offshore survey and subsea operations<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with a copies of your relevant certificates.<br><br></span><p>Shortlisted candidates will be contacted within 5 working days of application.<br></p><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Subsea Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br><br> </div>

Senior Site Engineer Location: UAE Job Type: Full-Time We are looking for an experienced and technically skilled Senior Site Engineer to lead the end-to-end deployment and commissioning of our PV cleaning robot systems at project sites. The ideal candidate will have strong experience in engineering installation, robotic systems, troubleshooting, commissioning, and client coordination. Key Responsibilities Lead and manage the complete on-site deployment of PV cleaning robot systems, from site assessment and planning to installation, commissioning, client training, and final handover. Provide technical guidance and supervision to installation teams, ensuring all systems are installed according to engineering specifications and quality standards. Perform functional testing, system calibration, and commissioning to ensure optimal robot performance. Configure and commission SCADA systems, ensuring seamless communication between robots, remote monitoring platforms, and client networks. Oversee the installation of rails, charging stations, communication modules, and other critical engineering components. Manage engineering materials and ensure proper inventory handling and quality control at project sites. Diagnose and resolve complex mechanical, electrical, software, navigation, and connectivity issues to minimize system downtime. Act as the primary technical point of contact for clients and stakeholders on-site. Conduct system demonstrations and provide operational and maintenance training to clients and end-users. Prepare field service reports, installation documentation, and technical issue logs. Provide structured technical feedback to engineering and product development teams to support continuous product improvement. Requirements Bachelor's Degree in Engineering in related field.5 years of proven experience in site engineering, system installation, commissioning, or technical project deployment. Strong knowledge of mechanical, electrical, and automated/robotic systems. Experience with SCADA systems, industrial communication, or remote monitoring platforms is preferred. Strong troubleshooting and problem-solving skills. Experience managing installation teams and working independently at project sites. Excellent communication and client-facing skills. Willingness to travel and work at project sites as required.

Company Description ALUMINIUM TRADE TEST CENTRE is a specialized facility focused on evaluating and developing skills in aluminium fabrication and installation. Based in Dubai, the centre supports the construction and manufacturing sectors by providing reliable technical assessments and training. The organization works closely with employers to ensure technicians meet industry standards for quality, safety, and performance. Team members benefit from exposure to diverse projects, modern tools, and opportunities to refine their technical expertise in aluminium systems.<br>Role Description ALUMINIUM TECHNICIANS at ALUMINIUM TRADE TEST CENTRE perform hands-on work related to aluminium fabrication, assembly, and installation for doors, windows, curtain walls, and other architectural systems. Day-to-day tasks include reading and interpreting technical drawings, measuring and cutting aluminium profiles, operating fabrication equipment, and assembling units according to specifications. Technicians are responsible for on-site fitting, alignment, and finishing, as well as inspecting completed work for quality and safety compliance. The role also involves basic maintenance of tools and machines, adherence to workplace safety procedures, and collaboration with supervisors and colleagues to meet project deadlines and standards. This is a full-time, on-site role based in Dubai.<br>Qualifications<br> <br>Demonstrated experience in aluminium fabrication, cutting, drilling, and assembly for doors, windows, and façade systems. Ability to read and interpret technical drawings, measurements, and specifications accurately. Competence in using hand tools and power tools, such as saws, drills, grinders, and measuring instruments. Knowledge of installation techniques for aluminium frames, glass fitting, sealing, and finishing works. Understanding of workplace safety practices, including proper use of personal protective equipment and safe handling of materials. Strong attention to detail, quality-focused mindset, and ability to identify and correct defects in fabricated or installed units. Ability to work independently and as part of a team, with reliable time management and problem-solving skills. Previous experience in aluminium workshops, construction sites, or related trades; trade certification or vocational training in aluminium or metal works is an advantage. Willingness to work on-site in Dubai, with flexibility to meet project schedules and physical ability to perform manual tasks.

<p>Job Summary<br /> We are a Dubai-based Office Automation service organization seeking a highly organized and customer-focused Technical Service Coordinator to oversee daily technical service operations and ensure the efficient scheduling of field service technicians. The successful candidate will coordinate service activities, monitor maintenance schedules, communicate with customers and technical staff, and ensure all service requests are completed on time and to the highest quality standards. The role also includes coordinating spare parts, maintaining accurate service records, and supporting the delivery of exceptional customer service.<br /> Duties and Responsibilities<br /> • Prepare and manage daily, weekly, and monthly technician schedules.<br /> • Coordinate technician and service staff assignments based on workload, priority, and availability.<br /> • Receive, schedule, and monitor customer service requests.<br /> • Communicate with customers regarding service appointments, updates, and job completion.<br /> • Identify spare part numbers using service manuals and parts list drawings.<br /> • Ensure service activities are completed within established timelines.<br /> • Maintain accurate service records, schedules, and reports.<br /> • Monitor staff attendance and coordinate schedule changes when required.<br /> • Work closely with supervisors to optimize workforce utilization.<br /> • Resolve scheduling conflicts and respond promptly to urgent service requests.<br /> • Ensure compliance with company policies, health and safety regulations, and quality standards.<br /> • Prepare service reports and maintain documentation for management review.<br /> • Support continuous improvement initiatives to enhance service efficiency and customer satisfaction.<br /> Qualifications<br /> • Previous experience in service coordination, scheduling, or customer service is preferred.<br /> • Experience in the office automation industry is an advantage.<br /> • Strong organizational and time-management skills.<br /> • Excellent verbal and written communication skills in English.<br /> • Strong understanding of preventive and corrective maintenance procedures.<br /> • Ability to identify spare part numbers from technical manuals and exploded parts drawings.<br /> • Proficiency in Microsoft Office and service management or scheduling software.<br /> • Ability to prioritize multiple service requests and work effectively under pressure.<br /> • Strong problem-solving and analytical skills with excellent attention to detail.<br /> • Customer-focused with excellent interpersonal skills.<br /> How to Apply<br /> Interested candidates should submit their CV and cover letter to Jobs@citech.ae no later than 30-8-2026.</p>

<p><strong>Key Responsibilities</strong></p><p><strong>Technical Design & Engineering</strong></p><ul><li><p>Develop conceptual and detailed engineering designs for Blast Resistant, Explosion Proof Modular Buildings, E-Houses, MCC Buildings, Control Rooms, and Containerized Solutions.</p></li><li><p>Review client specifications, datasheets, engineering standards, and tender documents.</p></li><li><p>Prepare technical layouts, General Arrangement (GA) drawings, equipment layouts, and engineering calculations.</p></li><li><p>Coordinate with Structural, Mechanical, Electrical, HVAC, Fire & Gas, and Architectural disciplines.</p></li><li><p>Ensure designs comply with international codes, standards, and project specifications.</p></li></ul><p><strong>Proposal Engineering & Tendering</strong></p><ul><li><p>Review RFQs, tender documents, and technical specifications.</p></li><li><p>Prepare technical and commercial proposals in line with client requirements.</p></li><li><p>Develop technical clarifications, compliance matrices, deviations, and bid documentation.</p></li><li><p>Participate in bid clarification meetings and technical discussions with clients and EPC contractors.</p></li><li><p>Coordinate with engineering, procurement, and commercial teams during bid preparation.</p></li></ul><p><strong>Estimation & Costing</strong></p><ul><li><p>Prepare detailed cost estimates and Bills of Quantities (BOQs).</p></li><li><p>Identify material requirements and obtain quotations from suppliers and subcontractors.</p></li><li><p>Evaluate fabrication, logistics, transportation, and installation costs.</p></li><li><p>Support management with pricing strategies, project budgeting, and risk assessments.</p></li></ul><p><strong>Application Engineering</strong></p><ul><li><p>Recommend optimized engineering solutions based on project specifications and customer requirements.</p></li><li><p>Deliver technical presentations and engineering support to clients.</p></li><li><p>Provide pre-award and post-award engineering assistance.</p></li><li><p>Support project execution teams during detailed engineering and implementation phases.</p></li></ul><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's Degree in Mechanical Engineering, Structural Engineering, or a related Engineering discipline.</p></li><li><p>Minimum <strong>5–8 years</strong> of relevant experience in:</p><ul><li><p>Blast Resistant Buildings (BRB)</p></li><li><p>Explosion Proof Modular Buildings</p></li><li><p>E-Houses</p></li><li><p>MCC Buildings</p></li><li><p>Control Rooms</p></li><li><p>Containerized Building Solutions</p></li></ul></li><li><p>Experience delivering projects for Oil & Gas, Petrochemical, Refinery, Power, or Industrial Infrastructure sectors.</p></li></ul><p><strong>Preferred Experience</strong></p><ul><li><p>Hands-on experience in Blast Resistant and Explosion Proof Building design.</p></li><li><p>Strong knowledge of modular construction and containerized building systems.</p></li><li><p>Familiarity with international standards including:</p><ul><li><p>API</p></li><li><p>NFPA</p></li><li><p>IEC</p></li><li><p>ATEX</p></li><li><p>ISO</p></li><li><p>IBC</p></li><li><p>AISC</p></li><li><p>ASCE</p></li><li><p>Blast Resistant Design Guidelines</p></li></ul></li><li><p>Experience working with major GCC clients and EPC contractors such as ADNOC, Petrofac, Technip, McDermott, NMDC, Saipem, Samsung Engineering, and similar organizations.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong technical knowledge of Blast Resistant & Explosion Proof Modular Buildings</p></li><li><p>Technical Design Engineering</p></li><li><p>Proposal Engineering</p></li><li><p>Cost Estimation & BOQ Preparation</p></li><li><p>Tendering & Bid Management</p></li><li><p>Application Engineering</p></li><li><p>Technical Bid Evaluation</p></li><li><p>Modular Building Design</p></li><li><p>Client & EPC Coordination</p></li><li><p>Engineering Documentation</p></li><li><p>AutoCAD and MS Office Suite</p></li><li><p>Strong communication, analytical, and problem-solving skills</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>We are seeking a proactive and detail-oriented <strong>Project Engineer – Design, Authority Approvals &amp; Fit-Out</strong> to manage engineering design, authority approvals, estimation, project execution, and client coordination for commercial, industrial and warehouse modification projects. The successful candidate will coordinate with government authorities, prepare technical documentation, manage project execution and ensure compliance with UAE regulations while delivering projects safely, on time and within budget.</p><br><br>Key ResponsibilitiesDesign &amp; Engineering<ul><li><p>Prepare architectural drawings, shop drawings and authority submission drawings using AutoCAD.</p><br><br></li><li><p>Develop layout plans, elevations and modification drawings for warehouses, offices, industrial facilities and commercial buildings.</p><br><br></li><li><p>Review engineering drawings and ensure compliance with applicable standards and authority regulations.</p><br><br></li><li><p>Coordinate with structural, MEP and architectural consultants.</p><br><br></li></ul>Authority Approvals<ul><li><p>Prepare documentation required for approvals from:</p><br><br><ul><li><p>Dubai Municipality (DM)</p><br><br></li><li><p>Trakhees</p><br><br></li><li><p>JAFZA</p><br><br></li><li><p>Dubai Development Authority (DDA)</p><br><br></li></ul></li><li><p>Submit applications and follow up until approvals and permits are obtained.</p><br><br></li><li><p>Attend authority inspections and technical meetings.</p><br><br></li><li><p>Resolve technical comments raised by approving authorities.</p><br><br></li></ul>Project Management<ul><li><p>Plan and coordinate project execution from initiation to completion.</p><br><br></li><li><p>Monitor project progress, schedules and resource allocation.</p><br><br></li><li><p>Coordinate subcontractors and suppliers.</p><br><br></li><li><p>Ensure projects are completed within agreed timelines.</p><br><br></li></ul>Client Management<ul><li><p>Meet clients to understand project requirements.</p><br><br></li><li><p>Explain authority approval procedures and documentation.</p><br><br></li><li><p>Provide technical advice and engineering solutions.</p><br><br></li><li><p>Maintain strong client relationships throughout project delivery.</p><br><br></li></ul>Quantity Surveying &amp; Estimation<ul><li><p>Prepare BOQs and quantity take-offs.</p><br><br></li><li><p>Perform material quantity estimation and rate analysis.</p><br><br></li><li><p>Prepare project quotations and cost estimates.</p><br><br></li><li><p>Support procurement and supplier negotiations.</p><br><br></li><li><p>Monitor project budgets and cost control.</p><br><br></li></ul>Site Supervision<ul><li><p>Conduct site inspections and measurements.</p><br><br></li><li><p>Supervise construction activities and labour teams.</p><br><br></li><li><p>Ensure compliance with approved drawings.</p><br><br></li><li><p>Monitor quality, safety and workmanship.</p><br><br></li><li><p>Resolve technical issues during execution.</p><br><br></li></ul>Documentation<ul><li><p>Prepare technical reports and project documentation.</p><br><br></li><li><p>Maintain project records.</p><br><br></li><li><p>Prepare invoices, purchase orders and delivery documentation where required.</p><br><br></li><li><p>Coordinate project close-out documentation.</p><br><br></li></ul>Qualifications<ul><li><p>Bachelor's Degree in Civil Engineering.</p><br><br></li><li><p>UAE Driving Licence.</p><br><br></li><li><p>AutoCAD proficiency.</p><br><br></li><li><p>Knowledge of UAE building regulations and authority approval procedures.</p><br><br></li><li><p>Good understanding of construction methodologies.</p><br><br></li></ul>Experience<ul><li><p>3–6 years' experience as a Project Engineer within the UAE.</p><br><br></li><li><p>Experience handling authority approvals with Dubai Municipality, Trakhees, JAFZA and DDA.</p><br><br></li><li><p>Experience in warehouse modifications, commercial fit-out or industrial projects.</p><br><br></li><li><p>Experience in estimation and BOQ preparation.</p><br><br></li><li><p>Experience coordinating clients, contractors and consultants.</p><br><br></li></ul><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking an experienced Technical Office Manager to lead the Technical Office Department for major building construction projects in Qatar.<br> The successful candidate will be responsible for managing the entire technical office function, ensuring the timely preparation, review, coordination, submission, approval, and distribution of all engineering deliverables required for project execution.<br> The role serves as the primary liaison between the Contractor, Consultants, Clients, Subcontractors, Suppliers, Procurement, Construction, QA/QC, Planning, BIM, and Design teams.<br> The Technical Office Manager will oversee multidisciplinary engineering coordination, manage technical documentation, monitor engineering KPIs, resolve technical issues, and ensure that all engineering submissions comply with contract requirements, project specifications, and project schedules.<br> This position is intended for professionals with extensive Tier-1 Main Contractor experience in building construction projects.<br> Candidates whose experience is primarily in consultancy, design offices, or engineering design firms will not be considered.<br> Competitive salary package Medical insurance Annual leave Air ticket as per company policy Employment visa provided Opportunity to work on landmark building projects in Qatar Long-term career growth with a leading construction contractor Bachelor's Degree in Civil Engineering, Structural Engineering, Architecture, Mechanical Engineering, Electrical Engineering, or a related engineering discipline.<br> 15+ years of total experience in building construction projects.<br> Minimum 10 years with Tier-1 or Tier-2 Main Contractors in Technical Office, Engineering Coordination, or technical management roles.<br> Minimum 5 years in a Technical Office Manager, Engineering Manager, or Senior Technical Office Engineer role.<br> Proven experience managing Technical Office teams on large-scale building projects.<br> Strong experience coordinating: Material Submittals Technical Submittals RFIs Technical Queries (TQs) Method Statements Consultant Approvals Engineering Documentation Strong understanding of contractor engineering workflows and multidisciplinary coordination.<br> Experience coordinating Structural, Architectural, Civil, and MEP disciplines.<br> Experience dealing directly with Consultants and Clients.<br> Previous experience on major building projects in Qatar or GCC .<br> Excellent technical writing and engineering documentation skills.<br></span> </div>

<p><strong>Customer Interaction & Relationship Management</strong><br></p><ul><li><p>Greet customers warmly and professionally upon arrival at the service reception.</p></li><li><p>Conduct thorough vehicle walk-arounds to identify visible damage or specific customer concerns.</p></li><li><p>Listen actively to customer descriptions of vehicle symptoms to understand their needs accurately.</p></li><li><p>Manage customer expectations regarding vehicle drop-off, service duration, and cost.</p></li></ul><p><br></p><p><strong>Technical Diagnosis & Quoting</strong><br></p><ul><li><p>Liaise with the Workshop Foreman and Technicians to diagnose complex technical issues.</p></li><li><p>Utilize workshop data and technical bulletins to recommend necessary repairs and maintenance schedules.</p></li><li><p>Prepare accurate, detailed, and transparent cost estimates for both warranty and non-warranty work.</p></li><li><p>Explain technical terms to customers in a clear, understandable manner.</p></li></ul><p><br></p><p><strong>Aftersales & Sales Conversion</strong><br></p><ul><li><p>Promote value-added services, such as extended warranties, service contracts, and accessory fitting.</p></li><li><p>Cross-sell replacement parts and tires where necessary.</p></li><li><p>Achieve targets for Workshop Efficiency (Productivity) and Profitability (Absorption).</p></li><li><p>Ensure the uptake of 'First Visit Resolution' to maximize customer satisfaction.</p></li></ul><p><br></p><p><strong>Warranty & Compliance</strong></p><br><ul><li><p>Process warranty claims in strict accordance with Stellantis (Dodge/Ram manufacturer) guidelines and time frames.</p></li><li><p>Ensure all documentation is compliant with Al-Futtaim and manufacturer policies.</p></li><li><p>Handle goodwill claims where applicable to support customer retention.</p></li></ul><p><br></p><p><strong>Operational Excellence</strong><br></p><ul><li><p>Monitor the progress of vehicles throughout the day to ensure timely completion.</p></li><li><p>Coordinate with the parts department to ensure parts availability.</p></li><li><p>Conduct post-service follow-up calls to ensure customer satisfaction and address any feedback.</p></li><li><p>Maintain a clean and professional service reception area.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Excellent command of English (written and spoken); Arabic is a strong advantage.</p></li><li><p>Ability to identify sales opportunities without being aggressive.</p></li><li><p>High empathy and patience when dealing with stressed customers.</p></li><li><p>Ability to work in a fast-paced environment and handle high volumes during peak seasons.</p></li></ul><p><br><strong>What Qualifies You For The Role:</strong><br></p><ul><li><p>Previous experience in an Automotive Service Advisor role or similar customer-facing position in the automotive industry.</p></li><li><p>Strong technical knowledge of automotive repair and maintenance operations.</p></li><li><p>Proficiency in using service management software and technical tools to diagnose vehicle issues.</p></li><li><p>Excellent communication skills in English; proficiency in Arabic is an advantage.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Layout creation as per brand guideline for printing</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>2D Graphic Designer (Product Layout Creation) – Dubai Investment Park 2 (DIP 2), Dubai</strong></p><br><p>We are looking for a talented and creative <strong>2D Graphic Designer</strong> to join our team in <strong>Dubai Investment Park 2 (DIP 2)</strong>.</p><br><p>Create visually engaging and production-ready artwork for <strong>2D planograms</strong> by designing and positioning graphics that accurately represent products on shelf layouts. Transform product references into clean, consistent, and brand-compliant visual assets, ensuring every artwork aligns perfectly with the corresponding product cutout for an authentic retail presentation</p><p>The ideal candidate should have strong knowledge of <strong>Adobe Illustrator</strong> and <strong>Adobe Photoshop</strong> and be capable of creating high-quality designs across a wide range of offline media materials.</p><p>Requirements:</p><ul><li><p>Proficiency in <strong>Adobe Illustrator</strong> and <strong>Adobe Photoshop</strong> is compulsory</p></li><li><p>Strong creative skills with excellent attention to detail</p></li><li><p>Ability to generate fresh and innovative design concepts</p></li><li><p>Self-motivated and capable of handling projects independently</p></li><li><p>Experience in designing for print and offline media</p><br></li></ul><p>Important:</p><ul><li><p>No CorelDRAW Designers.</p></li><li><p>No Web Designers.</p></li><li><p>Not Suitable for Digital media Designers.</p><br></li></ul><p>Responsibilities:</p><ul><li><p>Design and adapt artwork for 2D planograms based on product references.</p></li><li><p>Place artwork accurately on the corresponding product cutouts while maintaining visual consistency.</p></li><li><p>Ensure proper alignment, scaling, and positioning.</p></li><li><p>Ensure correct sizing, orientation, and branding across all product visuals.</p></li><li><p>Maintain brand guidelines and print specifications.</p></li><li><p>Deliver high-quality, production-ready files.</p></li><li><p>Prepare artwork for print production</p></li><li><p>Create realistic shelf-ready presentations that reflect the final retail appearance.</p></li><li><p>Collaborate with the team to develop creative concepts and branding materials</p></li><li><p>Ensure all designs meet brand standards and project deadlines</p></li></ul><p>Location: Dubai Investment Park 2 (DIP 2), Dubai</p><p>Ability to commute/relocate:</p><p><br></p><ul><li><p>Jebel Ali: Reliably commute or planning to relocate before starting work (Preferred)</p></li></ul><p><br></p><p>Application Question(s):</p><p><br></p><ul><li><p>Candidates should be willing to work extra hours when required, depending on project needs and deadlines. Overtime pay will be provided in accordance with company policy</p></li></ul><p><br></p><p>Location:</p><p><br></p><ul><li><p>Jebel Ali (Preferred)</p></li></ul><p><br></p><p>Work Location: In person</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>About the job</strong>&nbsp;</p><br><p>Join our Team&nbsp;-&nbsp;Your career journey starts here – not just a job, but a future.&nbsp;</p><br><p><strong>Our Potential Opportunity&nbsp;</strong>&nbsp;</p><br><p>INTECH Automation&nbsp;Intelligence&nbsp;is seeking a&nbsp;<strong>Electrical Engineer</strong>&nbsp;to join our dynamic team. This role is pivotal in supporting E-House Solutions across industries such as Oil &amp; Gas (Upstream, Midstream, Downstream), Petrochemicals, and Utilities.&nbsp;INTECH’s commitment to providing&nbsp;fully packaged, reliable solutions&nbsp;ensures you will contribute to transformative projects that enhance power distribution and infrastructure efficiency.&nbsp;</p><br><p>Our&nbsp;<strong>E-House Solutions</strong>&nbsp;are a testament to our dedication to delivering high-quality, scalable electrical infrastructure, reflecting our focus on excellence, reliability, and overcoming industry challenges.&nbsp;</p><br><p><strong>What You’ll Lead and Deliver</strong>&nbsp;</p><br><ul><li>Lead the technical execution of electrical projects from concept, design, and engineering through final delivery and handover.</li><li>Act as the primary technical focal point for all electrical engineering activities throughout the project lifecycle.</li><li>Review customer specifications, datasheets, and technical requirements and provide technical support during engineering, execution, manufacturing, testing, and commissioning phases.</li><li>Coordinate and review technical design and system integration for LV and MV switchgear, transformers, UPS and DC systems, VFDs, MCCs, bus duct systems, lighting and small power systems, HVAC electrical interfaces, fire and gas and fire alarm systems, building and structural interfaces, earthing systems, and cable routing.</li><li>Coordinate with vendors, OEMs, manufacturing teams, QA/QC, and project stakeholders to ensure technical compliance and timely completion of engineering and testing activities.</li><li>Review vendor drawings, calculations, technical documentation, and test procedures to ensure alignment with project specifications.</li><li>Coordinate, lead, and support FAT and SAT activities, including witnessing tests and ensuring resolution and closure of punch points, test observations, and technical non-conformities.</li><li>Ensure compliance with project requirements, client standards, and applicable international codes and standards such as IEC, IEEE, NEC, and NFPA.</li><li>Identify and resolve technical risks, design conflicts, interface issues, and testing gaps throughout the project lifecycle.</li><li>Support commissioning activities, site troubleshooting, and final project handover documentation.</li><li>Capture lessons learned and support continuous improvement initiatives.</li></ul> </div>

<p>We are seeking a qualified and detail-oriented Technical Engineer (Civil) to support project execution through technical coordination, drawing review, material approvals, and site support. The ideal candidate must have strong experience in civil construction works and high-rise building projects.</p><br><ol><li><p>Review and interpret architectural, structural, and MEP drawings.</p></li><li><p>Prepare and submit shop drawings, method statements, material submittals, and technical documents.</p></li><li><p>Coordinate with consultants, subcontractors, and project teams for technical clarifications.</p></li><li><p>Ensure compliance with project specifications, local authority regulations, and quality standards.</p></li><li><p>Assist in resolving technical issues at site.</p></li><li><p>Monitor project progress and ensure technical deliverables are completed on time.</p></li><li><p>Support QA/QC team in inspections and documentation.</p></li><li><p>Attend technical meetings with consultants and clients.</p></li><li><p>Prepare BOQs and assist in quantity take-offs when required.</p></li></ol><br><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor’s Degree in Civil Engineering.</p></li><li><p>Minimum 5–10 years of construction experience (High-rise experience preferred).</p></li><li><p>Strong knowledge of construction methodologies and materials.</p></li><li><p>Proficiency in AutoCAD (mandatory). Knowledge of Primavera / MS Project is an advantage.</p></li><li><p>Familiar with UAE authority regulations and standards.</p></li><li><p>Strong coordination and communication skills.</p></li></ol>

<ol><li><p>Support the organization’s maintenance and operational objectives by executing assigned technical tasks diligently and accurately.</p></li><li><p>Contribute to a safe, reliable, and efficient metro operation by adhering to approved procedures and standards</p></li><li><p>Carry out scheduled and unscheduled maintenance activities under supervision, in accordance with approved maintenance manuals, work instructions, and safety procedures.</p></li><li><p>Assist in inspections, technical cleaning, testing, fault finding, and rectification of rolling stock systems, equipment, and components.</p></li><li><p>Ensure accurate completion of maintenance records, checklists, and defect reports in the maintenance management system.</p></li><li><p>Comply with health, safety, quality, and environmental requirements while working in depots, workshops, and on-site location</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p><strong>Education</strong></p><p>ITI or Diploma in electrical, electronics, mechanical or automobile engineering discipline or equivalent</p><p><strong>Experience</strong></p><p>Fresher or candidate with up to 1 year of technical experience</p><p><strong>Skills / Training</strong></p><ol type="1"><li><p>Understand and speak basic English</p></li><li><p>Ability to listen and good communication skills</p></li><li><p>Understanding of safety and housekeeping practice</p></li><li><p>Ability to work under supervision and with Teams</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Oversee daily workshop operations and supervise technicians.</span><br><span>Plan and allocate work based on technician skills, workload, and job priority.</span><br><span>Monitor repair progress to ensure timely completion with quality and safety standards.</span><br><span>Provide technical support during diagnostics and repair activities.</span><br><span>Coordinate spare parts requirements and additional repair approvals.</span><br><span>Ensure efficient use of workshop tools, equipment, and consumables.</span><br><span>Monitor technician performance and support productivity improvement through KPIs.</span><br><span>Coordinate with Service Managers on technical issues and warranty requirements.</span><br><span>Support vehicle/equipment inspections, PDI activities, and delivery processes.</span><br><span>Maintain a safe, clean, and organized workshop in compliance with QHSEMS and company standards.</span><br> </span><br><span>Requirements<span>B.Tech/Diploma in Mechanical or Automobile Engineering</span><br><span>7–8 years of experience in heavy commercial vehicles/heavy equipment workshop operations</span><br><span>Experience as a Workshop Supervisor, Foreman, Team Lead, or similar role</span><br><span>Strong technical knowledge of vehicle/equipment diagnostics and repairs</span><br><span>Experience managing and guiding a team of technicians</span><br><span>Authorized Dealership experience is mandatory</span><br><span>Ability to use business communication tools and ERP software</span><br> </span><br><span>Benefits</span><p><b><span>Salary:</span></b><br></p><br> <ul> <li><span>Heavy Vehicle: AED 8,000/month</span><br></li> <li><span>Heavy Equipment: AED 9,000/month</span><br></li> </ul> <br> </div>