Electromechanical Engineer Jobs

Job Summary:Accountable for direct supervision of site execution activities for assigned works, ensuring all construction is carried out strictly per approved drawings, specifications, method statements, and quality standards. Acts as the technical lead on-site, coordinating with foremen, subcontractors, QA/QC, and project engineers to maintain high standards of workmanship, safety, and schedule adherence.<br>Key Responsibilities:Lead and supervise foremen and their teams to ensure day-to-day construction activities are executed precisely according to IFC drawings, shop drawings, and project specifications. Review method statements and detailed work procedures with foremen prior to execution to ensure full understanding of technical and safety requirements. Inspect and verify reinforcement placement, formwork, and concrete pours, ensuring correct bar bending schedules (BBS) implementation, cover, spacing, and compaction are in line with structural engineer’s design and standards. Monitor and supervise finishing works such as plastering, tiling, waterproofing, and painting, ensuring materials and workmanship meet approved samples and project specs. Coordinate with the QA/QC team during inspections and tests, preparing and maintaining detailed records of non-conformances, site instructions, and corrective actions. Verify that materials received on site comply with approved material submittals and are stored according to manufacturer and project requirements to prevent damage or deterioration. Liaise closely with subcontractors and suppliers on-site to ensure work sequencing and deliveries do not disrupt project timelines or quality standards. Prepare and maintain detailed daily site reports, recording progress, manpower, materials, weather conditions, and any site incidents or technical challenges. Support Project Engineers by preparing and submitting RFIs, site instructions, and variation requests related to site conditions or design discrepancies. Monitor subcontractor foremen’s performance and productivity, providing technical guidance and ensuring their work meets contractual and quality standards. Ensure all setting out points, benchmarks, and temporary works are maintained and adjusted as necessary to accommodate design changes or site constraints. Supervise and coordinate interface works between disciplines (civil, architectural, MEP) to prevent clashes and rework. Maintain as-built documentation and assist in updating site drawings to reflect approved modifications and changes. Assist in coordinating material testing, soil compaction, concrete strength tests, and other site-specific quality assurance activities. Work closely with the planning team to provide accurate and timely progress updates, highlighting any delays or constraints impacting the critical path.<br>Qualifications and Experience:Bachelor’s degree in Civil Engineering or Construction Management.5 or more years of experience in building construction including at least 4 years in Dubai. Strong technical knowledge of construction methods, structural and finishing works, and local authority requirements.

Job Summary:Accountable for direct supervision of site execution activities for assigned works, ensuring all construction is carried out strictly per approved drawings, specifications, method statements, and quality standards. Acts as the technical lead on-site, coordinating with foremen, subcontractors, QA/QC, and project engineers to maintain high standards of workmanship, safety, and schedule adherence.<br>Key Responsibilities:Lead and supervise foremen and their teams to ensure day-to-day construction activities are executed precisely according to IFC drawings, shop drawings, and project specifications. Review method statements and detailed work procedures with foremen prior to execution to ensure full understanding of technical and safety requirements. Inspect and verify reinforcement placement, formwork, and concrete pours, ensuring correct bar bending schedules (BBS) implementation, cover, spacing, and compaction are in line with structural engineer’s design and standards. Monitor and supervise finishing works such as plastering, tiling, waterproofing, and painting, ensuring materials and workmanship meet approved samples and project specs. Coordinate with the QA/QC team during inspections and tests, preparing and maintaining detailed records of non-conformances, site instructions, and corrective actions. Verify that materials received on site comply with approved material submittals and are stored according to manufacturer and project requirements to prevent damage or deterioration. Liaise closely with subcontractors and suppliers on-site to ensure work sequencing and deliveries do not disrupt project timelines or quality standards. Prepare and maintain detailed daily site reports, recording progress, manpower, materials, weather conditions, and any site incidents or technical challenges. Support Project Engineers by preparing and submitting RFIs, site instructions, and variation requests related to site conditions or design discrepancies. Monitor subcontractor foremen’s performance and productivity, providing technical guidance and ensuring their work meets contractual and quality standards. Ensure all setting out points, benchmarks, and temporary works are maintained and adjusted as necessary to accommodate design changes or site constraints. Supervise and coordinate interface works between disciplines (civil, architectural, MEP) to prevent clashes and rework. Maintain as-built documentation and assist in updating site drawings to reflect approved modifications and changes. Assist in coordinating material testing, soil compaction, concrete strength tests, and other site-specific quality assurance activities. Work closely with the planning team to provide accurate and timely progress updates, highlighting any delays or constraints impacting the critical path.<br>Qualifications and Experience:Bachelor’s degree in Civil Engineering or Construction Management.5 or more years of experience in building construction including at least 4 years in Dubai. Strong technical knowledge of construction methods, structural and finishing works, and local authority requirements.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li> <p><span>Provide technical expertise in all Process design</span></p><br></li> </ul><br> <ul> <li> <p><span>Ensure design and engineering compliance with relevant codes and ADNOC standards</span></p><br></li> </ul><br> <ul> <li> <p><span>Coordinate, Monitor and handle Process design and engineering with EPC Contractor as per project expectation and complete the same within the time frame</span></p><br></li> </ul><br> <ul> <li> <p><span>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp;&nbsp;</span></p><br></li> </ul><br> <ul> <li> <p><span>Perform regular and timely technical reviews of Process Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.</span></p><br></li> </ul><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <ul> <li> <p><span>Ensure integration of overall Process Engineering. Overall coordination within IPMT Process Engineering Team</span></p><br></li> </ul> <br> <ul> <li> <p><span>Ensure quality and accuracy of Engineering Consultant’s &amp; EPC Contractor’s Process Engineering design activities</span></p><br></li> </ul> <br> <ul> <li> <p><span>Review and approval of Engineering Consultant's and EPC Contractor’s work and ensure compliance with ADNOC project specifications, relevant codes and standards, and best industry practices</span></p><br></li> </ul> <br> <ul> <li> <p><span>Coordinate the required engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Participate in teams for equipment sizing / equipment selection considering optimization and standardization.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Participate in layout reviews, Model review, design reviews, and technical workshops.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Provide technical assistance and coordination with other discipline engineers.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Coordinate technical reviews and bid evaluation, and performance evaluation.</span></p><br></li> </ul> <br> <ul> <li> <p><span>Provide technical assistance during installation, pre-commissioning &amp; commissioning</span></p><br></li> </ul> <br> <ul> <li> <p><span>Report to ADNOC Discipline Team Leader, Engineering Manager, and provide support to Project Managers and Engineers within the Project Management Team organization</span></p><br></li> </ul> <br><br> <ul> <li> <p><span>Interface with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department</span></p><br></li> </ul> <br> <ul> <li> <p><span>Interface regularly with Contractor’s Engineering and Project Management team and discipline engineers as and when required</span></p><br></li> </ul> <br> <br><br>Qualifications:<br> <ul> <li> <p><span>Bachelor of Science degree in Chemical Engineering</span></p><br></li> </ul><br> <ul> <li> <p><span>Minimum of 15 years of relevant experience in oil and gas industry&nbsp;</span></p><br></li> </ul><br> <ul> <li> <p><span>Excellent written and verbal communication skills</span></p><br></li> </ul><br> <ul> <li> <p><span>Excellent technical team and interpersonal skills</span></p><br></li> </ul><br> <ul> <li> <p><span>Experience and detailed knowledge of relevant international codes and standards</span></p><br></li> </ul><br> <ul> <li> <p><span>Knowledge of engineering computer programs and general business software</span></p><br></li> </ul><br> <ul> <li> <p><span>Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems</span></p><br></li> </ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical expertise in all Instrumentation design&nbsp;</li> </ul><br> <ul> <li>Ensure design and engineering compliance with relevant codes and ADNOC standards&nbsp;</li> </ul><br> <ul> <li>Coordinate, Monitor and handle Instrumentation design and engineering with EPC Contractor as per project expectation and complete the same within the time frame&nbsp;</li> </ul><br> <ul> <li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp; &nbsp;</li> </ul><br> <ul> <li>Perform regular and timely technical reviews of Instrumentation Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.&nbsp;</li> </ul><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <ul> <li>Ensure integration of overall Instrumentation Engineering. Overall coordination within IPMT Instrumentation Engineering Team&nbsp;</li> </ul> <br> <ul> <li>Ensure quality and accuracy of Engineering Consultant’s &amp; EPC Contractor’s Instrumentation Engineering design activities&nbsp;</li> </ul> <br> <ul> <li>Review and approval of Engineering Consultant's and EPC Contractor’s work and ensure compliance with ADNOC project specifications, relevant codes and standards, and best industry practices&nbsp;</li> </ul> <br> <ul> <li>Coordinate the required engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation.&nbsp;</li> </ul> <br> <ul> <li>Participate in teams for equipment sizing / equipment selection considering optimization and standardization.&nbsp;</li> </ul> <br> <ul> <li>Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects.&nbsp;</li> </ul> <br> <ul> <li>Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects.&nbsp;</li> </ul> <br> <ul> <li>Participate in layout reviews, Model review, design reviews, and technical workshops.&nbsp;</li> </ul> <br> <ul> <li>Provide technical assistance and coordination with other discipline engineers.&nbsp;</li> </ul> <br> <ul> <li>Coordinate technical reviews and bid evaluation, and performance evaluation.&nbsp;</li> </ul> <br> <ul> <li>Provide technical assistance during installation, pre-commissioning &amp; commissioning&nbsp;</li> </ul> <br> <ul> <li>Report to ADNOC Discipline Team Leader, Engineering Manager, and provide support to Project Managers and Engineers within the Project Management Team organization&nbsp;</li> </ul> <br><br> <ul> <li>Interface with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department&nbsp;</li> </ul> <br> <ul> <li>Interface regularly with Contractor’s Engineering and Project Management team and discipline engineers as and when required&nbsp;&nbsp;</li> </ul> <br> <br><br>Qualifications:<br> <ul> <li>Bachelor of Science degree in Electrical / Instrumentation or Electronics Engineering&nbsp;</li> </ul><br> <ul> <li>Minimum of 15 years of relevant experience in oil and gas industry&nbsp;&nbsp;</li> </ul><br> <ul> <li>Excellent written and verbal communication skills&nbsp;</li> </ul><br> <ul> <li>Excellent technical team and interpersonal skills&nbsp;</li> </ul><br> <ul> <li>Experience and detailed knowledge of relevant international codes and standards&nbsp;</li> </ul><br> <ul> <li>Knowledge of engineering computer programs and general business software&nbsp;</li> </ul><br> <ul> <li>Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems&nbsp;</li> </ul><br> </div>

BEC Arabia is seeking experienced Senior Civil Engineers specializing in Quantity Surveying (QS) to join our dynamic Construction team in Makkah. This is a unique opportunity to contribute to high-profile projects while advancing Saudi Vision 2030 initiatives.<br><br>Job Description<br><br>About the Role<br><br>BEC Arabia is seeking Senior Civil Engineers specializing in Quantity Surveying (QS) to join our Construction team in Makkah. As a key member of our project delivery team, you will play a pivotal role in managing cost estimation, contract administration, and financial oversight for large-scale infrastructure and construction projects. Working closely with multidisciplinary teams, you will ensure that projects are delivered on time, within budget, and to the highest quality standards.<br><br>This role is integral to BEC Arabia's commitment to excellence in project execution, aligning with our mission to deliver world-class infrastructure that supports Saudi Vision 2030. You will have the opportunity to work on iconic projects, including government mega-projects, smart cities, and commercial developments, collaborating with top-tier clients such as NEOM, Saudi Aramco, and the Royal Commission. With a focus on professional growth and innovation, this position offers a rewarding career trajectory in a fast-paced, high-impact environment.<br><br>Key Responsibilities<br><br>Lead the preparation of detailed cost estimates and bills of quantities (BOQ) for large-scale construction projects. Manage contract administration, including reviewing tender documents, assessing variations, and preparing claims. Coordinate with project managers, architects, and engineers to ensure accurate cost forecasting and budget control. Monitor project expenditures and provide regular financial reports to stakeholders. Ensure compliance with Saudi Building Code (SBC), ARAMCO standards, and other regulatory requirements. Develop value engineering solutions to optimize project costs while maintaining quality and functionality. Conduct risk assessments related to cost and contract management, proposing mitigation strategies. Oversee subcontractor and supplier agreements, ensuring alignment with project specifications and budgets. Utilize advanced software tools such as Primavera P6, Auto CAD Civil 3D, and BIM platforms for cost analysis and project planning. Support the implementation of sustainability practices, including Mostadam and LEED standards, in project execution. Mentor junior QS team members, fostering a culture of continuous learning and professional development.<br><br>Required Qualifications<br><br>Bachelor of Science in Civil Engineering or a related field. Minimum of 8 years of experience in quantity surveying and civil engineering roles, with at least 3 years in a senior capacity. Saudi Council of Engineers (SCE) registration is mandatory. Proficiency in Primavera P6, Auto CAD Civil 3D, and BIM tools. Strong knowledge of Saudi Building Code (SBC) and ARAMCO standards. Experience with contract management and cost control in large-scale construction projects. Familiarity with OSHA, ISO 45001, and ISO 9001 standards.<br><br>Preferred Qualifications<br><br>Master's degree in Civil Engineering, Construction Management, or a related field. Certification in MRICS, PMP, or Certified Cost Professional (CCP). Experience working on Saudi Vision 2030 giga-projects. Expertise in green building standards such as Mostadam, LEED, or Estidama. Proficiency in advanced cost analysis tools and techniques.<br><br>Working Conditions<br><br>Based in Makkah, with occasional travel to project sites across the GCC region. Combination of office-based work and on-site inspections at active construction sites. Use of personal protective equipment (PPE) is mandatory during site visits. Exposure to hot and arid climate conditions typical of Saudi Arabia. Standard workweek with potential for extended hours during project milestones.<br><br>What We Offer<br><br>Competitive salary and benefits package aligned with industry standards. Opportunities for career advancement within a leading construction firm. Access to professional development programs and certifications. Exposure to iconic mega-projects contributing to Saudi Vision 2030. A safety-first culture with adherence to global standards. A multicultural work environment fostering innovation and collaboration.<br><br>Key Responsibilities<br><br>Lead the preparation of detailed cost estimates and bills of quantities (BOQ) for large-scale construction projects. Manage contract administration, including reviewing tender documents, assessing variations, and preparing claims. Coordinate with project managers, architects, and engineers to ensure accurate cost forecasting and budget control. Monitor project expenditures and provide regular financial reports to stakeholders. Ensure compliance with Saudi Building Code (SBC), ARAMCO standards, and other regulatory requirements. Develop value engineering solutions to optimize project costs while maintaining quality and functionality. Conduct risk assessments related to cost and contract management, proposing mitigation strategies. Oversee subcontractor and supplier agreements, ensuring alignment with project specifications and budgets. Utilize advanced software tools such as Primavera P6, Auto CAD Civil 3D, and BIM platforms for cost analysis and project planning. Support the implementation of sustainability practices, including Mostadam and LEED standards, in project execution. Mentor junior QS team members, fostering a culture of continuous learning and professional development.<br><br>Required Qualifications<br><br>Bachelor of Science in Civil Engineering or a related field. Minimum of 8 years of experience in quantity surveying and civil engineering roles, with at least 3 years in a senior capacity. Saudi Council of Engineers (SCE) registration is mandatory. Proficiency in Primavera P6, Auto CAD Civil 3D, and BIM tools. Strong knowledge of Saudi Building Code (SBC) and ARAMCO standards. Experience with contract management and cost control in large-scale construction projects. Familiarity with OSHA, ISO 45001, and ISO 9001 standards.<br><br>Preferred Qualifications<br><br>Master's degree in Civil Engineering, Construction Management, or a related field. Certification in MRICS, PMP, or Certified Cost Professional (CCP). Experience working on Saudi Vision 2030 giga-projects. Expertise in green building standards such as Mostadam, LEED, or Estidama. Proficiency in advanced cost analysis tools and techniques.<br><br>Working Conditions<br><br>Based in Makkah, with occasional travel to project sites across the GCC region. Combination of office-based work and on-site inspections at active construction sites. Use of personal protective equipment (PPE) is mandatory during site visits. Exposure to hot and arid climate conditions typical of Saudi Arabia. Standard workweek with potential for extended hours during project milestones.<br><br>What We Offer<br><br>Competitive salary and benefits package aligned with industry standards. Opportunities for career advancement within a leading construction firm. Access to professional development programs and certifications. Exposure to iconic mega-projects contributing to Saudi Vision 2030. A safety-first culture with adherence to global standards. A multicultural work environment fostering innovation and collaboration.<br><br>Required Skills<br><br>Primavera P6 Auto CAD Civil 3D BIM tools Cost estimation Contract management Value engineering<br><br>Preferred Skills<br><br>MRICS certification PMP certification Certified Cost Professional (CCP) LEED standards Mostadam expertise<br><br>Share this job<br><br>Linked In Twitter Email

External Job Description<br><br>REPONSIBILITIES<br><br>FPGA Design & Development:Design and implement FPGA firmware for various digital hardware applications. Develop and optimize RTL (Register Transfer Level) code using VHDL or Verilog. Perform synthesis, place-and-route, and timing closure tasks on FPGA devices. Work with industry-standard FPGA development tools such as Xilinx Vivado, Intel Quartus, etc. Digital Hardware Design:Design digital logic circuits and systems, including combinational and sequential logic. Collaborate with hardware engineers to design interfaces and integrate FPGA-based solutions with other components (e.g., processors, sensors, memory). Develop and implement signal processing algorithms and high-speed digital communications. Simulation and Verification:Develop testbenches and perform simulation and debugging to ensure functionality and performance meet requirements. Validate designs through hardware emulation, testing, and debugging using tools like Model Sim or similar simulators. Ensure design robustness by performing comprehensive validation and verification processes. Embedded Systems & Firmware Development:Develop embedded firmware for controlling FPGA logic and interacting with external systems. Work with microcontrollers, memory devices, and communication protocols (e.g., SPI, I2C, UART, PCIe) in conjunction with FPGA designs. Write low-level drivers and software for hardware interface management.<br>Requirements<br><br>Minimum 5-7 years of experience in embedded systems/ FPGA-based solution development ideally in the military or defense fields. Knowledge of radar / EW principles, including electromagnetic theory, RF systems, radar waveforms, and signal processing techniques. Knowledge of phased array radar / EW systems, synthetic aperture radar (SAR), or multi-static radar systems. Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field. Strong understanding of digital logic design, timing analysis, and FPGA architecture. Proficient in FPGA programming using Verilog, VHDL, or System Verilog. Experience with simulation tools (e.g., Model Sim, XSIM) and debugging techniques. Familiarity with embedded systems and interfacing FPGA with processors and peripheral devices. Experience with high-speed digital communication protocols (e.g., PCIe, Ethernet, Serial, etc.). Strong skills in mathematics, image, signal, or data processing

Key Responsibilities Perform complex hydrologic and hydraulic modelling for water and stormwater infrastructure projects. Design stormwater management systems, including detention basins, storm sewer networks, and outfall structures. Prepare designs from feasibility studies, concept, preliminary, and detailed design stages through to construction supervision. Ensure designs comply with local authority requirements and relevant engineering standards. Coordinate with regulatory authorities, including Abu Dhabi and Dubai Municipalities, to obtain necessary approvals. Collaborate closely with Geotechnical, Structural, Coastal, and other multidisciplinary teams to ensure integrated project delivery. Support procurement activities and provide technical coordination during construction.<br><br>Qualifications & Experience Bachelor's degree in Civil Engineering or Environmental Engineering. Minimum 8–10 years of experience in Water and Stormwater Infrastructure Design, Procurement, and Construction Coordination. Strong expertise in hydrological and hydraulic modelling and stormwater system design. Experience working with UAE authorities and regulatory requirements is highly preferred<br>.<br>Technical Skills Proficiency in one or more of the following software:SWMMCivil 3DHEC-HMSHEC-RASInfo Works Storm C<br>AD

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Key Responsibilities </span><ul> <li>Perform preventive and corrective maintenance for electrical systems and components.</li> <li>Maintain automatic doors, cleaning machines, electrical forklifts, and diesel forklifts.</li> <li>Identify and report technical faults and safety risks while following safety procedures.</li> <li>Execute preventive and breakdown maintenance activities for electrical equipment and systems.</li> <li>Read and follow maintenance SOPs, manuals, drawings, specifications, blueprints, and technical diagrams.</li> <li>Troubleshoot malfunctions and repair or replace damaged parts and components.</li> <li>Follow quality systems, safety procedures, and cGMP requirements.</li> <li>Collaborate with cross-functional departments to avoid production interruptions.</li> <li>Support all electrical activities of the Engineering Section during shifts.</li> <li>Collect electrical parameters for daily checklists.</li> <li>Coordinate and handle SAP PM/CM notifications, receiving reports, and purchase requisitions.</li> </ul> Qualifications &amp; Experience <ul> <li>Diploma in Electrical Engineering or Mechatronics Engineering.</li> <li>Minimum 2 years of experience in a similar field.</li> <li>Knowledge of electrical codes and guidelines.</li> <li>Knowledge of cGMP and data integrity principles.</li> <li>Knowledge of electrical generation and distribution systems.</li> <li>Knowledge of electrical equipment installation and maintenance.</li> <li>Good documentation and reporting skills.</li> </ul> </div>

Length of Contract: 4 Months with a possibility of extension Salary: Upto AED 32,000 Job Location: Abu Dhabi Client: MNC Company<br>Required immediate joiners only<br>We are hiring an experienced Active Directory (AD) SME to assess the current AD infrastructure, define the target architecture, and lead the implementation of the future-state environment.<br>???? Key Skills Required:• Active Directory Domain Services (AD DS) design, deployment, and administration• Group Policy (GPO) design and management• DNS, DHCP, Sites & Services• AD replication and trust relationships• AD FS / Federation Services• Strong Active Directory architecture and transformation experience• Microsoft Entra ID<br>???? Key Responsibilities:• Assess the existing AD environment and define the target cloud-based domain architecture• Design and implement the target AD environment• Produce technical design documentation (HLD / LLD)• Lead AD modernization and migration activities in collaboration with stakeholders If you have strong enterprise AD architecture experience and have delivered complex transformation projects, we would love to hear from you.

Length of Contract: 4 Months with a possibility of extension Salary: Upto AED 32,000 Job Location: Abu Dhabi Client: MNC Company<br>Required immediate joiners only<br>We are hiring an experienced Active Directory (AD) SME to assess the current AD infrastructure, define the target architecture, and lead the implementation of the future-state environment.<br>???? Key Skills Required:• Active Directory Domain Services (AD DS) design, deployment, and administration• Group Policy (GPO) design and management• DNS, DHCP, Sites & Services• AD replication and trust relationships• AD FS / Federation Services• Strong Active Directory architecture and transformation experience• Microsoft Entra ID<br>???? Key Responsibilities:• Assess the existing AD environment and define the target cloud-based domain architecture• Design and implement the target AD environment• Produce technical design documentation (HLD / LLD)• Lead AD modernization and migration activities in collaboration with stakeholders If you have strong enterprise AD architecture experience and have delivered complex transformation projects, we would love to hear from you.

<p><strong><u>Purpose of Job</u></strong></p><p><br></p><ul><li>To be responsible for the development and maintenance of all environmental aspects of the Takreer HSEMS and HSE Control Procedures, in line with ADNOC requirements and the principles of ISO 14001.</li><li>To provide professional specialist advice to all Takreer divisions regarding the implementation of Environmental Management and protection procedures. To advise on requirements for new procedures as necessary.</li><li>To exchange Best Practice with other ADNOC Group of Companies regarding environmental protection.</li><li>At request from other Takreer Divisions to carry out environmental audits, inspections and investigations covering pollution of air, water or soil and to recommend improvements.</li><li>To make recommendations for improved management and monitoring of environmental hazards in order to achieve ADNOC Group policy objectives and Codes of Practice on environmental protection.</li><li>To monitor compliance with local and international standards on environmental protection.</li><li>To define the scope of Environmental Impact Assessments and other necessary Environmental studies and to coordinate with consultants and contractors regarding their implementation.</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>KEY RESPONSIBILITIES:</p><p><br></p><p>Regulatory &amp; Compliance:</p><p>● Register as Technical Manager with Dubai Municipality</p><p>● Obtain Technical Practice Certificate through Dubai Municipality system</p><p>● Ensure all technical documentation meets DM and regulatory requirements</p><p>● Maintain compliance with UAE building codes and standards</p><p><br></p><p>Operational Setup:</p><p>● Establish project execution procedures and quality control systems</p><p>● Set up technical documentation and filing systems</p><p>● Coordinate with authorities for permits, approvals, and inspections</p><p>● Develop vendor and subcontractor network</p><p><br></p><p>Technical Leadership:</p><p>● Serve as primary technical authority for all projects (G+1 building contracting)</p><p>● Review and approve engineering drawings, specifications, and BOQs</p><p>● Oversee site supervision and quality assurance</p><p>● Prepare technical proposals and bid documentation</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>REQUIRED QUALIFICATIONS:</p><p>● Bachelor's degree in Civil Engineering</p><p>● Valid UAE Civil Engineering license or immediate eligibility to obtain one</p><p>● 2-5 years experience in UAE building contracting sector</p><p>● Strong knowledge of Dubai Municipality requirements and approval processes</p><p>● Experience with Technical Practice Certificate procedures (highly preferred)</p><p>● Ability to work independently as sole technical authority</p><p>● Valid UAE driving license</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and implement scalable and resilient infrastructure solutions, including servers, networks, and storage systems, ensuring optimal performance and availability.</li><li>Automate infrastructure provisioning, configuration, and management using scripting and Infrastructure as Code (IaC) tools, streamlining deployments and reducing manual effort.</li><li>Monitor infrastructure performance and proactively identify and resolve issues, ensuring high service levels and minimizing downtime.</li><li>Manage and maintain virtualized environments, including VMware or other virtualization platforms, optimizing resource utilization and ensuring efficient operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possesses a Bachelor's degree in Computer Science, Information Technology, or a related field, providing a strong foundation in technical principles.</li><li>Holds relevant certifications such as AWS Certified Solutions Architect, Azure Solutions Architect Expert, or VMware Certified Professional, demonstrating expertise in cloud and virtualization technologies.</li><li>Has a minimum of 5 years of experience in infrastructure engineering, with a proven track record of designing, implementing, and managing complex IT infrastructure environments.</li><li>Demonstrates expertise in networking, including TCP/IP, DNS, DHCP, routing, and switching, ensuring a solid understanding of network fundamentals.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Prepare detailed tender programme in accordance with tender requirements</span></p><br><p><span>Prepare manpower and equipment schedules in close collaboration with Tender Manager / Cost Estimator</span></p><br><p><span>Work closely with the cost estimator in preparing the schedule on the duration, equipment and manpower</span></p><br><p><span>Update tender schedule onto the online data base on regular basis</span></p><br><p><span>Liaise with sub-contractors and suppliers on the procurement and construction durations and ensure to be in line with the tender milestone requirements and highlight when we are not complying</span></p><br><p><span>Understand tender/contractual conditions, scope &amp; obligations (including estimation basis)</span></p><br><p><span>Understand project execution plan, work breakdown structure (WBS), activity sequence, priorities and planning logics &amp; constraints</span></p><br><p><span>Assist in the preparation of Project Planning Package and Project Specific Project Control Procedure</span></p><br><p><span>Measure actual progress and monitor against planned</span></p><br><p><span>Assist in periodic issuance of updated planning package, progress reports, monitoring package &amp; production control tools in co-ordination and communication with various executing parties (Engineering, Procurement, Yards, Offshore and PMT)</span></p><br><p><span>Regular site visits for progress follow up</span></p><br><p><span>Process and analyse planning &amp; project control related data</span></p><br><p><span>Identify potential problems and areas of concern</span></p><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Supervise and monitor joinery installation activities on-site, ensuring work is executed according to approved drawings and project specifications.</li><li>Coordinate with the project management team, subcontractors, and other stakeholders to ensure timely and accurate execution of joinery works.</li><li>Ensure quality control by inspecting the joinery installations, identifying defects or issues, and coordinating corrective actions.</li><li>Liaise with the factory to track the production and delivery of joinery items, ensuring materials are available on-site as per project timelines.</li><li>Resolve on-site technical issues related to joinery works, collaborating with the factory and design teams when necessary.</li><li>Prepare and maintain site reports, including daily progress reports, material usage, and manpower deployment.</li><li>Ensure that safety regulations are strictly followed on-site, including the use of protective gear and safe work practices during joinery installations.</li><li>Attending site meetings to provide updates on the progress of joinery works, addressing any concerns raised by the client or contractor.</li><li>Review and interpret technical drawings and project documents, ensuring installations align with the design intent and specifications.</li><li>Assist in preparing method statements and work procedures for joinery installations.</li><li>Monitor and track project timelines, reporting any delays or deviations to the Project Manager and ensuring timely project completion.</li><li>Coordinate inspections and handover processes with the client and main contractor, ensuring joinery works meet all contractual and regulatory requirements.</li><li>Provide technical guidance and support to site teams and subcontractors to ensure accurate and efficient installation processes.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum 3+ years of relevant experience in UAE joinery</p></li><li><p>Must have Bachelor’s Degree with UAE MOFA attestation</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p><strong>Handovers &amp; Condition Assessments:</strong> Support Senior Surveyors in conducting property handovers and comprehensive condition assessments across the UAE, translating asset data into practical maintenance and compliance solutions.</p></li><li><p><strong>Site Inspections:</strong> Conduct rigorous on-site inspections and asset handovers to gather field data, evaluate existing building conditions, and ensure constructed finishes align with contractual handover standards and local regulations.</p></li><li><p><strong>Technical Analysis:</strong> Perform technical analysis of building defects (snagging), structural deterioration, and material performance to guarantee the safety, efficiency, and long-term integrity of the property assets.</p></li><li><p><strong>Reporting &amp; Documentation:</strong> Prepare detailed snagging lists, technical condition reports, and specifications using engineering tools and survey software to document defects and asset conditions clearly.</p></li><li><p><strong>Mobility &amp; Site Travel:</strong> Utilize a valid UAE driving license to independently travel to various site locations across the Emirates for timely field inspections and assessments.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p><strong>Education:</strong> Bachelor’s degree in Building Surveying, Civil Engineering, Architectural Engineering, or a closely related field.</p></li><li><p><strong>Experience:</strong> 1–3 years of experience in property inspection, snagging, building surveying, or site supervision, preferably within the UAE.</p></li><li><p><strong>Licensing:</strong> <strong>A valid UAE Driving License is strictly mandatory</strong> for this role due to frequent travel between project sites.</p></li><li><p><strong>Technical Skills:</strong></p><ul><li><p>Proficiency in CAD software and digital surveying/snagging applications.</p></li><li><p>Strong understanding of building pathology (identifying defects, dampness, structural cracks, etc.).</p></li><li><p>Familiarity with UAE building codes, civil defense regulations, and handover protocols.</p></li></ul></li><li><p><strong>Soft Skills:</strong> Exceptional attention to detail, strong report-writing skills in English, and the ability to professionally interface with clients, developers, and contractors on-site.</p></li><li><p><strong>Salary</strong> : The salary for this role is capped at AED 4000.00 inclusive of all benefits.</p></li></ol><p></p></section>

Databricks Platform Lead (AWS)<br>Location: UAE and Saudi arabia, Europe<br>About the Role We are looking for a Senior Databricks Platform Lead to design, build, and manage an enterprise Databricks Lakehouse platform on AWS. This is a hands-on technical leadership role where you will define the platform architecture, improve security, optimize cloud costs, mentor engineers, and work closely with business and technical teams. Key Responsibilities Design and maintain the Databricks Lakehouse platform on AWS. Build secure, scalable, and high-performance data platform architecture. Manage AWS infrastructure including VPC, IAM, EC2, S3, networking, and security. Configure and administer Databricks workspaces, Unity Catalog, clusters, and permissions. Develop standards for data ingestion, transformation, and orchestration using PySpark and Delta Lake. Build and support batch and streaming data pipelines using Databricks, Kinesis, SNS/SQS, and Auto Loader. Create cluster policies, autoscaling, and cost controls to optimize cloud spending. Monitor platform health, audit logs, security, and performance. Support ML workloads using MLflow and integrations with Sage Maker or AWS Bedrock. Lead migration of legacy data warehouses and on-premise platforms to Databricks Lakehouse. Mentor engineering teams, review designs, and establish coding best practices. Work closely with business stakeholders and AWS teams to deliver platform improvements. Required Skills Strong experience with Databricks Platform Administration and development. Deep knowledge of AWS including VPC, IAM, EC2, S3, Private Link, and networking. Hands-on experience with Unity Catalog, SCIM, and data governance. Strong PySpark and Delta Lake development experience. Experience building large-scale ETL/ELT and streaming data pipelines. Knowledge of Kinesis, SNS, SQS, Glue, and AWS DMS. Experience managing Databricks clusters, autoscaling, and cloud cost optimization. Experience migrating legacy data platforms to cloud-based Lakehouse architecture. Strong leadership, mentoring, and stakeholder management skills. Nice to Have MLflow, Sage Maker, or AWS Bedrock experience. Databricks Certification. AWS Solutions Architect or AWS Data Analytics certification. Experience with SOC 2 or similar security compliance standards.

Databricks Platform Lead (AWS)<br>Location: UAE and Saudi arabia, Europe<br>About the Role We are looking for a Senior Databricks Platform Lead to design, build, and manage an enterprise Databricks Lakehouse platform on AWS. This is a hands-on technical leadership role where you will define the platform architecture, improve security, optimize cloud costs, mentor engineers, and work closely with business and technical teams. Key Responsibilities Design and maintain the Databricks Lakehouse platform on AWS. Build secure, scalable, and high-performance data platform architecture. Manage AWS infrastructure including VPC, IAM, EC2, S3, networking, and security. Configure and administer Databricks workspaces, Unity Catalog, clusters, and permissions. Develop standards for data ingestion, transformation, and orchestration using PySpark and Delta Lake. Build and support batch and streaming data pipelines using Databricks, Kinesis, SNS/SQS, and Auto Loader. Create cluster policies, autoscaling, and cost controls to optimize cloud spending. Monitor platform health, audit logs, security, and performance. Support ML workloads using MLflow and integrations with Sage Maker or AWS Bedrock. Lead migration of legacy data warehouses and on-premise platforms to Databricks Lakehouse. Mentor engineering teams, review designs, and establish coding best practices. Work closely with business stakeholders and AWS teams to deliver platform improvements. Required Skills Strong experience with Databricks Platform Administration and development. Deep knowledge of AWS including VPC, IAM, EC2, S3, Private Link, and networking. Hands-on experience with Unity Catalog, SCIM, and data governance. Strong PySpark and Delta Lake development experience. Experience building large-scale ETL/ELT and streaming data pipelines. Knowledge of Kinesis, SNS, SQS, Glue, and AWS DMS. Experience managing Databricks clusters, autoscaling, and cloud cost optimization. Experience migrating legacy data platforms to cloud-based Lakehouse architecture. Strong leadership, mentoring, and stakeholder management skills. Nice to Have MLflow, Sage Maker, or AWS Bedrock experience. Databricks Certification. AWS Solutions Architect or AWS Data Analytics certification. Experience with SOC 2 or similar security compliance standards.

JOB SUMMARY:Minimum of 4 to 15 years of experience in Design and Engineering of GIS and AIS Substations projects for voltage level of 66 KV and above up to 765 KV. Key Accountabilities:Pre-Bid:· Carrying out HV/ EHV substation design and drawings for both AIS and GIS substations<br>Preparation of equipment specification, layout drawings and calculations (Short circuit force, Earthing, Direct lightning stroke protection, Conductor sizing, CT / CVT sizing, battery sizing etc.), sizing for the equipment designs and systems <br>BOQ preparation· Knowledge of standards (IEC, IEEE, ANSI). Experience in substation designs from 66k V to 765k V<br>EHV substation designs, Switchyard layouts, Switchyard equipment designs experience is must.· Knowledge of Auto Cad software is must.· Knowledge of Software like ETAP, CDEGs etc. will be preferable.· Must be able to work independently for the jobs.· Person should possess good communication skills and able to discuss issues with customer / vendor Execution of Contract:<br>· Shall be able to prepare/guide the design team to be able to prepare the SLD, general arrangement drawings, electrical layout, sections, EKD, DSLP, Earthing Layout, cable trench layout, switch yard illumination, cable schedule, bill of materials (BOMs) etc. Should be well versed with various busbar schemes.· Should be able to review the equipment vendor’s drawings/documents. Should also be able to guide the design team to review the equipment vendor’s drawings.· Should be able to interface with control and protection requirements and knowledge of review of schemes is desirable.· Should be well versed with design calculation for Earthing design, Sag tension, DSLP, Short circuit forces, battery sizing calculation, equipment sizing etc.· Should be able to closely monitor the progress of work (both Projects as well as tender) of the design team. Should also ensure that the projects/tender deliverables are given on time, without delay.· Should be able to handle/monitor the draftspersons. Should be able to co-ordinate with civil design engineers wherever interfaces. <br> Qualification: BE/BTech - Electrical(Regular)<br>Experience: Min. 4 Years Candidate must have experience in Substation Design.

Fuse Energy is a forward-thinking renewable energy startup on a mission to deliver a terawatt of renewable energy - fast. We're combining first-principles thinking with cutting-edge technology to build a radically better energy system. We raised $210M from top-tier investors including Multicoin, Balderton, Lakestar, Accel, Creandum, Lowercarbon, Ribbit, Box Group and strategic angels like Nico Rosberg, the Co-Founder of Solana and GPs behind Meta, Revolut, Spotify, Uber and more.<br><br>We're creating a fully integrated energy company: from developing solar, wind and hydrogen projects to real-time power trading and distributed energy installations. By selling directly to consumers, we cut out the middleman, lower costs and pass on savings to customers.<br><br>But we're not stopping there. We're also building the Energy Network: a decentralised platform of smart devices to electrify our homes, shifting usage to off-peak hours and helping balance the grid. This network strengthens grid stability - a critical foundation for scaling AI data centers and other energy-intensive industries.<br><br>Responsibilities<br><br>Build and maintain responsive, performant web applications using React, Type Script, Next.js, and modern front-end practices Collaborate with backend engineers to implement APIs and ensure smooth data integration Work closely with product and design teams to deliver intuitive, user-friendly experiences Participate in prototyping and experimentation to test and validate new features Dig into data, validate ideas, and help define the product roadmap Contribute to our broader product direction and help shape the future of clean energy tech<br><br>Requirements<br><br>Bachelor's degree in a technical or analytical field, or equivalent practical experience5+ years of hands-on experience developing web applications with Type Script, React, HTML, CSS, and Next.js Proven experience building and shipping consumer-facing products Strong communication skills and ability to collaborate effectively with cross-functional teams Understanding of performance optimization techniques for modern web applications<br><br>Benefits<br><br>Competitive salary and an equity sign-on bonus Biannual bonus scheme Fully expensed tech to match your needs Paid annual leave Breakfast and dinner allowance for office based employees