Embedded Systems Engineer Jobs in UAE

Position: Quality Control Engineer – Design & Installation<br>Job Summary The Quality Control (QC) Engineer is responsible for ensuring that all interior design, fit-out, and installation works comply with approved drawings, project specifications, client requirements, UAE regulations, and company quality standards. The role involves inspecting materials, monitoring workmanship, coordinating with design and site teams, conducting quality audits, and ensuring projects are delivered defect-free and on schedule. Key Responsibilities1. Design Quality Control Review final drawings, IFC drawings, material specifications, and BOQs before execution. Verify that design intent is accurately translated into production and site execution. Coordinate with the design team to resolve technical and quality-related issues. Ensure compliance with client-approved samples, finishes, and material specifications. Identify design discrepancies and recommend corrective actions before installation. Review concept, schematic, and detailed design packages for accuracy, completeness, and consistency. Verify architectural and interior design drawings, including layout plans, elevations, sections, reflected ceiling plans, joinery details, and shop drawings. Ensure drawings comply with company drafting standards, project specifications, authority requirements, and applicable codes. Ensure revisions are properly incorporated and documented.2. Material Inspection & Quality Assurance Inspect incoming materials, furniture, fixtures, finishes, hardware, and accessories. Verify materials against approved submittals and mock-ups. Reject non-conforming materials and coordinate replacement with procurement and vendors. Maintain inspection reports and material approval records. Ensure proper storage and handling of materials to prevent damage.3. Site Installation Quality Control Conduct regular inspections during installation activities. Verify dimensions, levels, alignment, finishes, and workmanship. Ensure installation complies with approved shop drawings and method statements. Monitor subcontractor workmanship and adherence to quality standards. Perform stage-wise inspections before proceeding to the next activity.4. Finishing & Snagging Conduct pre-handover inspections. Prepare snag lists and monitor closure of defects. Coordinate with project managers and subcontractors for rectification. Verify completion of corrective actions before client inspections. Ensure projects are handed over with zero critical defects.5. Documentation & Reporting Prepare Daily, Weekly, and Monthly QC Reports. Maintain inspection checklists and quality records. Document Non-Conformance Reports (NCRs) and Corrective Action Reports (CARs). Maintain records of inspections, approvals, and quality audits. Support internal and external quality audits.6. Compliance Ensure compliance with:UAE Building Regulations Dubai Municipality requirements

Job Title: Project Engineer – High-Rise Construction Location: UAEIndustry: Construction / Real Estate / High-Rise Buildings<br>Job Summary We are seeking an experienced Project Engineer with strong expertise in high-rise building construction in the UAE. The successful candidate will be responsible for coordinating and monitoring project execution, ensuring work is completed according to approved drawings, project schedules, quality standards, safety requirements, and client specifications.<br>Key Roles & Responsibilities Project Coordination & Execution Coordinate day-to-day project activities from mobilization to project handover. Assist the Project Manager in planning, scheduling, and monitoring project progress. Ensure work is executed in accordance with approved drawings, specifications, and project timelines. Coordinate with consultants, subcontractors, suppliers, and internal departments to ensure smooth project execution. Site & Construction Management Supervise structural, architectural, MEP, and finishing works on site. Monitor construction activities to ensure compliance with approved method statements and quality standards. Conduct regular site inspections and coordinate with QA/QC and HSE teams. Resolve technical issues and provide engineering support during construction. Authority Coordination & Compliance Coordinate with Dubai Municipality, Civil Defense, DEWA, ADDC, Trakhees, DDA, and other relevant authorities for inspections and approvals. Ensure compliance with UAE building regulations, project specifications, and contractual requirements. Cost & Contract Support Assist in reviewing BOQs, variation orders, and subcontractor work progress. Support project cost control by monitoring material usage and productivity. Coordinate with the commercial team for payment applications and project documentation. Quality, Safety & Risk Management Ensure QA/QC procedures and HSE standards are implemented on site. Identify construction risks and report issues to the Project Manager. Promote a safe working environment and ensure compliance with company safety policies. Reporting & Documentation Prepare daily, weekly, and monthly progress reports. Maintain project documentation, site records, RFIs, inspections, and material approvals. Coordinate technical meetings and follow up on action items.<br>Qualifications & Experience Bachelor's Degree in Civil Engineering.5–8 years of UAE experience in high-rise building construction. Proven experience working on G+20 and above residential or commercial projects. Strong knowledge of UAE construction practices, authority approvals, and site coordination. Proficiency in Primavera P6, MS Project, Auto CAD, and Microsoft Office. Excellent communication, coordination, and problem-solving skills.

Company Description China Harbour Engineering Company Ltd. (CHEC), a subsidiary of Global Fortune 500 company China Communications Construction Company Ltd. (CCCC), is a leading international engineering and construction enterprise. With over 90 overseas branches and subsidiaries, CHEC operates in more than 100 countries and manages a global project portfolio valued at approximately $30 billion. The company delivers EPC, BOT, and PPP projects across marine engineering, dredging, roads, bridges, railways, airports, and building construction, as well as municipal and environmental works. CHEC is guided by values of responsibility, quality, and win-win cooperation, and is committed to innovation, sustainability, and long-term partnerships that support economic and community development worldwide.<br>Role Description: The Senior Planning Engineer – Construction is a full-time, on-site role based in Dubai. This role is responsible for developing, monitoring, and updating project schedules using appropriate planning tools, ensuring alignment with construction methodologies and contractual milestones. The Senior Planning Engineer prepares progress reports, forecasts, and resource allocation plans, and collaborates with project managers, site teams, and stakeholders to identify risks, delays, and mitigation measures. Day-to-day tasks include analyzing project performance, supporting project control activities, coordinating with procurement and production teams, and maintaining accurate planning data and documentation. The role also contributes to improving planning processes, enhancing efficiency, and ensuring projects are delivered safely, on time, and within budget.<br>Qualifications:Candidates should possess strong Planning and Production Planning skills for complex construction projects. Candidates should possess advanced Analytical Skills to evaluate schedules, resources, risks, and project performance. Candidates should possess effective Communication skills to collaborate with multidisciplinary teams, stakeholders, and clients. Candidates should possess solid Project Control skills, including progress tracking, reporting, and variance analysis. Bachelor’s degree in Civil Engineering, Construction Management, or a related field; a master’s degree or professional certification (e.g., PMP, PSP) is an advantage. Relevant experience in large-scale infrastructure or marine construction projects, preferably in the Middle East. Proficiency in planning and scheduling software (e.g., Primavera P6, MS Project) and MS Office tools. Strong understanding of construction methodologies, contract conditions, and health and safety standards.

*Job Title: Design Engineer – CAD & Solid Works | Sheet Metal | Automotive*<br><br>Industry:* Automotive / Auto Components Manufacturing Department:* Product Design / R&DLocation:* Dubai, UAEExperience:* 2-4 Years Salary:* AED 4,000 – AED 5,000 per month + Benefits Employment Type:* Full-Time Joining:* Immediate / 30 Days Notice<br><br>*Job Summary*<br><br>We are hiring a *Design Engineer* for a leading automotive company in Dubai.<br><br>Candidate must have *strong hands-on experience in Solid Works and 2D CAD*, specifically in *Sheet Metal Design* for automotive components, tools, jigs & fixtures.<br><br>Manufacturing background preferred – you should understand how designs translate to shop floor production.<br><br>*Key Responsibilities*<br><br> Develop 3D models and detailed 2D drawings using *Solid Works & Auto CAD* for automotive sheet metal parts, assemblies, and tooling *Design sheet metal components, jigs, fixtures, and press tools* for production and quality checking Create BOM, GD&T drawings, and technical documentation as per automotive standards Perform flat pattern development, bend allowance calculation, and DFM for sheet metal parts Coordinate with manufacturing, tooling, and production teams to ensure designs are manufacturable Support prototype development, testing, and design modifications based on shop floor feedback Maintain design data, revision control, and engineering change notes Work closely with suppliers and vendors for tooling and component sourcing Ensure compliance with automotive industry standards and client specifications<br><br>*Required Qualifications*<br><br> *B. E. / http://B. Tech / Diploma in Mechanical Engineering* *2-4 years of hands-on experience in CAD design for automotive components with Sheet Metal focus* *Advanced proficiency in Solid Works*: Part modeling, Assembly, *Sheet Metal*, Surface, Drawings Knowledge of *Auto CAD 2D drafting* Understanding of manufacturing processes: *Sheet Metal, Laser Cutting, Press Brake, Welding, Machining* Experience with *GD&T, tolerance stack-up*, and ISO automotive standards preferred Candidates with *direct manufacturing/shop floor background in sheet metal* will be preferred<br><br>*Preferred Skills*<br><br> Exposure to *automotive sheet metal jigs/fixtures, body parts, brackets, enclosures* Knowledge of PDM/PLM software UAE/GCC experience is an advantage Note:* Candidates with Sheet Metal Design experience in Automotive Industry is Mandatory<br><br>Work Location:Dubai, UAE.<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: fixtures,automotive,sheet metal,jigs,manufacturing,solidworks,metal,cad,components,design

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br>Job Description<br><br>QA/QC Engineer (Materials)<br><br>Abu Dhabi, UAE<br><br>Parsons is seeking a QA/QC Engineer (Materials) to join our Construction Supervision team in Abu Dhabi. The role involves managing material quality activities including inspection, testing, documentation and coordination to ensure compliance with contract requirements, specifications, and applicable standards.<br><br>What You'll Be Doing<br><br>Implement and monitor project QMS and Quality Plans at site level. Review contractor IRs, method statements, ITPs and subcontractor prequalification documents. Coordinate inspections and verify compliance with approved ITPs and sampling/testing plans. Review and approve material submittals, mix designs, source approvals and compliance certificates. Ensure material traceability through delivery inspections and test certificates. Manage NCRs, corrective actions, quality records and handover documentation. Monitor third-party laboratory testing and support quality reporting and audits. Conduct site inspections/spot checks and ensure compliance with specifications. Liaise with contractors and internal teams to resolve quality issues.<br><br><br>What Required Skills You'll Bring<br><br>BSc in Civil Engineering or equivalent (with relevant registration if applicable).8–10 years’ experience on major infrastructure, bridges, utilities, stormwater or infrastructure projects (Abu Dhabi preferred). Strong knowledge of material approval processes, specifications and testing. Familiarity with DMT/ADM requirements; DMT/TAQA approval is preferred. Proficiency in MS Office and QA/QC reporting systems.<br><br><br>What Desired Skills You'll Bring<br><br>Knowledge of ISO 9000, ASTM, ASME, ANSI standards. Strong communication and stakeholder coordination skills. Experience working with Abu Dhabi authorities and major developers.<br><br><br>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

Transguard Workforce Solutions is the UAE’s leading provider of unique and innovative HR solutions. With a decade of experience in the region and a team that possesses extensive knowledge of the market, we provide a fully integrated HR solution. We are currently recruiting a Technical Support Engineer (Reliability & Rotating Equipment) for our client based in Dubai for 12 Months Contract.<br>Job Summary:We are seeking a Technical Support Engineer to drive equipment reliability by tracking asset failures, identifying recurring issues and implementing corrective actions. The role focuses on improving plant performance through MTBF/MTTR monitoring, root cause analysis, and supporting maintenance activities for rotating equipment.<br>Job Responsibilities:1. Reliability & Performance Management Review corrective and breakdown work orders to identify repetitive failures and dominant failure modes Track and analyze MTBF, MTTR, and MTTF for critical assets Generate reliability reports and highlight performance improvement opportunities Identify and manage “bad actors” and ensure follow-up on corrective actions2. Root Cause Analysis (RCA) Conduct RCA for major and recurring failures Collaborate with cross-functional teams to determine root causes Ensure implementation and closure of corrective and preventive actions3. Rotating Equipment Maintenance Support preventive and corrective maintenance of pumps, compressors, turbines, and fans Perform vibration monitoring and analysis Assist with laser alignment and mechanical seal refurbishment4. Troubleshooting & Overhauling Troubleshoot operational issues in rotating equipment Support equipment overhauling and inspection activities Conduct bearing inspections and mechanical seal failure analysis5. Spares & Asset Management Define and optimize spare parts inventory (min/max levels) based on usage and lead times Review and maintain equipment BOMs and critical spare lists Identify surplus, missing, or obsolete inventory Interpret engineering drawings to identify and link spares with equipment6. Engineering Documentation Work with and interpret technical drawings including:P&IDs, PFDsGeneral Arrangement (GA) drawings Mechanical seal and cross-sectional drawings Isometric drawings<br>Job Requirements:Bachelor’s Degree or Diploma in Mechanical Engineering5+ years of experience in reliability and maintenance of rotating equipment Experience in oil & gas, petrochemical, or heavy industry preferred Certifications such as CMRP or CRE are an advantage Reliability engineering & failure analysis Vibration analysis & condition monitoring Strong troubleshooting skills Knowledge of rotating equipment maintenance

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>� We're Hiring: Senior Estimation Engineer / Bid Engineer �</p><p>� Location: Abu Dhabi, UAE</p><p>� Industry: Oil &amp; Gas / EPC Projects</p><p>This is an excellent opportunity for professionals with strong estimation, tendering, cost analysis, and bid management experience who can drive competitive and compliant proposals from inception through submission.</p><p>Key Responsibilities</p><p>✅ Lead and coordinate the preparation of technical and commercial bid submissions.</p><p>✅ Review tender documents, identify scope requirements, and ensure bid completeness.</p><p>✅ Participate in pre-bid meetings, post-bid meetings, and site surveys.</p><p>✅ Raise and manage technical and commercial clarifications with clients to ensure bid accuracy.</p><p>✅ Prepare and verify detailed Material Take-Offs (MTOs) and quantity take-offs.</p><p>✅ Coordinate with subcontractors and vendors, evaluate quotations, and prepare bid evaluation comparisons.</p><p>✅ Collaborate with Project, HSE, Quality, Planning, Procurement, Finance, and HR departments to obtain required bid inputs.</p><p>✅ Prepare cost estimates, including direct and indirect costs, ensuring alignment with industry best practices.</p><p>✅ Identify project risks and develop appropriate contingency allowances within estimates.</p><p>✅ Ensure technical and commercial proposals are fully compliant with client requirements and tender specifications.</p><p>✅ Present bid summaries and cost estimates to management for review and approval.</p><p>✅ Support project teams during post-award handover and clarification stages.</p><p>Alternatively, you may also connect with and reach out to Falcor's Lead HR, **Uzma Ehsan Al Haq**, on LinkedIn</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements � Bachelor's Degree in Mechanical Engineering. � 12–15 years of total experience, with 6–8 years of UAE Oil &amp; Gas industry experience preferred. � Proven experience in estimation, tendering, bid preparation, and cost control for EPC projects. � Strong knowledge of MTO preparation, quantity take-offs, cost estimation methodologies, and commercial evaluations. � Experience coordinating with subcontractors, vendors, and multidisciplinary departments. � Ability to analyze risks and develop comprehensive project cost estimates. � Strong commercial awareness and understanding of contract and tendering processes. � Excellent analytical, communication, negotiation, and presentation skills. What We're Looking For ✔ Strong leadership and bid management capabilities. ✔ Excellent attention to detail and commercial acumen. ✔ Ability to manage multiple tenders and meet strict submission deadlines. ✔ Proven track record of delivering accurate, competitive, and compliant proposals.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking an Operations Engineer – Offshore &amp; Subsea to join our client's offshore operations team based in Abu Dhabi, UAE. This is a permanent office-based role with regular offshore and field travel during project campaigns, supporting the planning, coordination, and technical execution of offshore survey and subsea operations.<br></p><br><p>You will be responsible for bridging engineering and offshore operations, ensuring operational readiness, technical compliance, and efficient execution of offshore campaigns. Working closely with project managers, vessel teams, offshore personnel, logistics, and clients, you will support the successful delivery of survey, subsea, and marine operations while driving continuous improvement across operational processes and standards.<br></p><br><span>Key Responsibilities:</span><br>- Support the planning and coordination of offshore campaigns by developing resource plans, equipment readiness schedules, vessel requirements, and operational timelines to ensure successful project execution.<br><br>- Develop, review, and maintain operational procedures, method statements, risk assessments, lift plans, and safe systems of work in accordance with company, client, and regulatory requirements.<br><br>- Coordinate with project engineers, vessel management, offshore personnel, logistics teams, and subcontractors to ensure the timely deployment of equipment, personnel, and project resources.<br><br>- Monitor offshore operational performance throughout project execution, identifying technical issues, operational risks, schedule deviations, and resource constraints while supporting timely corrective actions.<br><br>- Prepare and coordinate pre-mobilization documentation, including mobilization checklists, Permit to Work (PTW) documentation, toolbox talks, SIMOPS planning, and operational readiness packages.<br><br>- Act as a key interface with clients during offshore campaigns, supporting operational planning meetings, daily progress reporting, technical discussions, approvals, and execution updates.<br><br>- Monitor operational KPIs, analyse project performance data, and contribute to lessons learned, after-action reviews, and continuous improvement initiatives across offshore operations.<br><br>- Participate in operational readiness reviews, Management of Change (MoC) processes, and pre-campaign planning activities to ensure all technical, operational, and safety requirements are achieved prior to offshore execution.<br><br>- Support the development, implementation, and continuous improvement of operational management systems, procedures, standards, and best practices across survey and subsea operations.<br><br>- Promote compliance with company HSE policies, client requirements, industry regulations, and international offshore standards while fostering a strong operational safety culture.<br><br><br><span>Requirements-&nbsp;Bachelor's Degree in Marine Engineering, Mechanical Engineering, Subsea Engineering, Ocean Engineering, or a related engineering discipline.<br><br>- 5–9 years of experience in offshore operations, marine operations engineering, subsea projects, or offshore survey operations.<br><br>- Strong understanding of offshore operational planning, vessel operations, project execution, risk management, and HSE requirements.<br><br>- Experience supporting offshore mobilizations, operational readiness reviews, SIMOPS, Permit to Work systems, and Management of Change (MoC) processes.<br><br>- Knowledge of offshore survey, subsea construction, IRM, or marine support operations is highly desirable.<br><br>- Excellent coordination, stakeholder management, technical reporting, and problem-solving skills.<br><br>- Ability to work effectively with multidisciplinary project teams in dynamic offshore environments.<br><br>- Proficiency in Microsoft Office and operational reporting or project management systems is preferred.<br><br><span>Certifications (Please attach the below certificates)</span><br>- Valid BOSIET or HUET certification.<br><br>- ADNOC operational access approval, or the ability to obtain it, is highly advantageous.<br><br>- DP Awareness or DP Operator certification is advantageous.<br><br>- Knowledge of IMCA guidelines and offshore industry best practices is preferred.<br><br></span><br><span>Benefits- Attractive Salary + benefits<br><br>- Permanent employment with a leading offshore and subsea engineering organization<br><br>- Opportunity to support major offshore survey, subsea, and marine operations for ADNOC and regional energy projects<br><br>- Exposure to multidisciplinary offshore operations, including vessel campaigns, mobilizations, SIMOPS, and operational readiness planning<br><br>- Opportunity to develop expertise in offshore operations engineering, subsea project execution, and marine operational management<br><br>- Long-term career growth and progression within a stable organization delivering complex offshore and subsea projects<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with copies of your relevant certifications.<br><br>Shortlisted candidates will be contacted within 5 working days of application<br><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Subsea Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Plan, supervise and ensure effective electrical maintenance activities for the production facilities and distribution network at the Plant to ensure technical and operational safety, integrity and reliability of the assets and to minimize downtime of the facilities.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p><strong>Maintenance Planning, Execution and Expertise</strong></p><br><p>•&nbsp;&nbsp; &nbsp;Plan and carry out Predictive / Reliability Centered Maintenance (RCM) programs for condition monitoring of Electrical equipment to ensure improved machine availability and power system reliability.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Conduct Internal Safety audit of the installations in the plant with regards to Electrical equipment and develop action plan for area maintenance engineers to take up corrective measures.<br>•&nbsp;&nbsp; &nbsp;Participate in the preparation of predictive, preventive, modification and major shutdown maintenance programmes for electrical equipment in the plant. Review the periodic &amp; shutdown work plans and integrate activities with other sections for their execution.<br>•&nbsp;&nbsp; &nbsp;Participate and provide professional expertise in the technological up-gradation of obsolete equipment and preparation &amp; execution of Plant Change Requests (PCRs) for modification in existing facilities.<br>•&nbsp;&nbsp; &nbsp;Carry out detailed engineering; prepare scope of work, technical evaluation and execution for Capital, Extra Ordinary Maintenance (EOM) and Major Maintenance (MM) activities.<br>•&nbsp;&nbsp; &nbsp;Review the existing maintenance practices and support implementation of innovative &amp; modern methodologies for enhanced productivity leading to improvement in equipment performance and reliability. Ensure optimum utilization of the maintenance system for maintaining job history and data quality so as to retrieve quality information.<br>•&nbsp;&nbsp; &nbsp;Supervise High Voltage switching activities in line with set policies and procedures to ensure safe operations.<br>•&nbsp;&nbsp; &nbsp;Prepare method statements for critical jobs, verify electrical procedures and instructions, plus scope of work for contract jobs and service work orders to meet work requirements and standards.<br>•&nbsp;&nbsp; &nbsp;Participate in technical evaluation of bids and inspection of materials on receipt to ensure specifications and required quality.<br>•&nbsp;&nbsp; &nbsp;Provide technical support for development, implementation and commissioning of new projects in the electrical design and specifications to optimize costs and ensure compliance with applicable standards and best practices.</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Supervision</strong><br>•&nbsp;&nbsp; &nbsp;Plan, supervise and coordinate all activities in the assigned area to meet functional objectives.<br>•&nbsp;&nbsp; &nbsp;Train and develop the assigned staff on relevant skills to enable them to become proficient on the job and deliver the respective section objectives.<br><strong>Budgets</strong><br>•&nbsp;&nbsp; &nbsp;Provide input for preparation of the Department/ Section budgets and assist in the implementation of the approved Budget and work plans to deliver Section objectives.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Investigate and highlight any significant variances to support effective performance and cost control.<br><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement approved Department / Section policies, processes, systems, standards and procedures in order to support execution of the Department / Section’s work programs in line with Company and International standards.<br>•&nbsp;&nbsp; &nbsp;Comply with all applicable legislation and legal regulations.<br><strong>Performance Management</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the achievement of the approved Performance Objectives for the Department / Section in line with the Company Performance framework.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Design and implement new tools and techniques to improve the quality and efficiency of &nbsp; operational processes.<br>•&nbsp;&nbsp; &nbsp;Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with ISO standards in order to define intelligent solutions for issues confronting the function.<br><strong>Health, Safety, Environment (HSE) and Sustainability</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Provide inputs to prepare Section MIS and progress reports for Company Management<br>&nbsp;</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required<br>&nbsp;</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Electrical Engineering or equivalent Professional Qualification</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>6 years of experience in maintenance activities for electrical equipment, within a large industrial organization, preferably in the Oil and Gas industry<br>&nbsp;</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal</p><br><p><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity and dust during occasional site visits.</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Maintenance / Maintenance Execution</p><br><br><br><br><br> </div>

<ul><li><p>Implement and monitor project-specific QA/QC procedures for civil construction activities.</p></li><li><p>Review project drawings, specifications, BOQs, method statements, ITPs, and quality requirements.</p></li><li><p>Conduct inspections of civil works to ensure compliance with approved drawings, specifications, and construction procedures.</p></li><li><p>Inspect excavation, earthworks, backfilling, compaction, foundations, reinforcement, formwork, concrete, masonry, waterproofing, drainage, roads, utilities, and finishing works.</p></li><li><p>Prepare and submit Inspection Requests and coordinate inspections with consultants and client representatives.</p></li><li><p>Verify that construction activities are executed using approved materials, drawings, method statements, and procedures.</p></li><li><p>Review material submittals, delivery documents, test certificates, and material approvals before use at site.</p></li><li><p>Coordinate with laboratories and third-party agencies for required material and site testing.</p></li><li><p>Witness concrete slump tests, cube sampling, soil tests, compaction tests, reinforcement inspections, and other applicable quality tests.</p></li><li><p>Verify test results against project specifications and acceptance criteria.</p></li><li><p>Maintain proper traceability of construction materials, test reports, inspection records, and approvals.</p></li><li><p>Conduct regular site inspections and identify defective, incomplete, or non-conforming works.</p></li><li><p>Raise NCRs, observations, and quality notifications where work or materials do not meet requirements.</p></li><li><p>Coordinate with construction teams to identify root causes and implement corrective and preventive actions.</p></li><li><p>Monitor and verify timely closure of NCRs, observations, punch points, and quality-related issues.</p></li><li><p>Ensure approved drawings and latest revisions are available at site before commencement of work.</p></li><li><p>Verify reinforcement size, spacing, lap lengths, cover, formwork dimensions, levels, alignment, embedments, and anchor bolts before concrete pours.</p></li><li><p>Monitor concrete pouring activities, including pre-pour inspections, delivery, slump, temperature, cube sampling, placement, vibration, finishing, and curing.</p></li><li><p>Inspect earthworks and ensure proper excavation, filling, compaction, levels, and testing are carried out as specified.</p></li><li><p>Inspect waterproofing, protective coatings, sealants, and other specialist civil works.</p></li><li><p>Ensure construction materials are properly stored, protected, and handled in accordance with project and manufacturer requirements.</p></li><li><p>Review subcontractor quality documentation and monitor compliance with project QA/QC requirements.</p></li><li><p>Participate in quality meetings, technical coordination meetings, and site inspections with clients and consultants.</p></li><li><p>Support internal, client, consultant, and external quality audits.</p></li><li><p>Ensure measuring and testing equipment used for inspections is properly calibrated and within validity.</p></li><li><p>Maintain QA/QC documentation, inspection logs, test reports, NCR registers, material records, and quality trackers.</p></li><li><p>Prepare daily, weekly, and monthly quality reports as required.</p></li><li><p>Monitor recurring quality issues and support implementation of preventive measures.</p></li><li><p>Assist the Senior QA/QC Engineer in preparing project quality dossiers and close-out documentation.</p></li><li><p>Ensure as-built information, inspection records, test certificates, approvals, and other quality documents are properly compiled for handover.</p></li><li><p>Promote quality awareness among construction teams and subcontractors.</p></li><li><p>Perform other QA/QC duties assigned by the Senior Engineer or Project Manager.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Good knowledge of civil construction QA/QC practices.</p></li><li><p>Strong understanding of concrete, reinforcement, formwork, earthworks, foundations, drainage, roads, waterproofing, and finishing works.</p></li><li><p>Knowledge of Inspection and Test Plans, Method Statements, NCRs, observations, and corrective actions.</p></li><li><p>Ability to read and interpret civil drawings, specifications, BOQs, and technical documents.</p></li><li><p>Good understanding of material inspection and laboratory testing procedures.</p></li><li><p>Knowledge of relevant standards such as ASTM, BS, EN, ACI, and project-specific specifications.</p></li><li><p>Familiarity with UAE construction standards and authority requirements.</p></li><li><p>Strong inspection, reporting, documentation, and record-keeping skills.</p></li><li><p>Good analytical and problem-solving abilities.</p></li><li><p>Strong coordination skills with consultants, clients, subcontractors, suppliers, and construction teams.</p></li><li><p>Good knowledge of MS Office and document-control systems.</p></li><li><p>Ability to work effectively under pressure and meet project deadlines.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Bachelor’s degree in <strong>Civil Engineering</strong> from a recognized university.</p></li><li><p><strong>5–8 years of relevant experience</strong> in civil QA/QC within construction, infrastructure, engineering, industrial, or EPC projects.</p></li><li><p>Experience in inspection and quality control of major civil construction activities.</p></li><li><p>Hands-on experience with <strong>ITPs, Method Statements, Inspection Requests, NCRs, material approvals, and quality documentation</strong>.</p></li><li><p>Experience coordinating with consultants, clients, laboratories, subcontractors, and third-party inspection agencies.</p></li><li><p>UAE/GCC experience is preferred.</p></li><li><p>Experience working on projects in <strong>Dubai and Abu Dhabi</strong> will be an advantage.</p></li><li><p><strong>ISO 9001 Internal Auditor/Lead Auditor</strong> or other relevant QA/QC certification will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Compliance of civil works with approved drawings and specifications.</p></li><li><p>Timely inspection and approval of construction activities.</p></li><li><p>Effective implementation of ITPs and QA/QC procedures.</p></li><li><p>Timely identification and closure of NCRs and quality observations.</p></li><li><p>Accurate material testing, inspection, and traceability.</p></li><li><p>Completeness and accuracy of QA/QC records and reports.</p></li><li><p>Effective coordination with construction, consultant, and client teams.</p></li><li><p>Successful preparation of quality documentation for project handover.</p></li></ul><p><br></p><p><strong>Interview Details</strong></p><p><br></p><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><p><br></p><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

Role Description An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, troubleshooting, repairing, testing, and certifying aircraft, aircraft systems, components, and equipment to ensure safe, reliable, and airworthy operation. The role works closely with maintenance teams, pilots, engineering departments, operations, manufacturers, suppliers, and aviation authorities while following approved maintenance procedures and applicable aviation regulations. Key responsibilities include performing scheduled and unscheduled aircraft maintenance, inspections, servicing, troubleshooting, repairs, modifications, and component replacement; conducting pre-flight, transit, daily, weekly, A-check, C-check, and other scheduled maintenance activities as applicable; inspecting aircraft structures, engines, landing gear, flight-control systems, hydraulic systems, pneumatic systems, fuel systems, electrical systems, avionics, communication systems, navigation systems, and other aircraft components; diagnosing mechanical, electrical, hydraulic, pneumatic, structural, and avionics faults using approved maintenance manuals, technical documentation, diagnostic equipment, and specialized tools; interpreting Aircraft Maintenance Manuals (AMM), Structural Repair Manuals (SRM), Illustrated Parts Catalogues (IPC), Wiring Diagram Manuals (WDM), Fault Isolation Manuals (FIM), Component Maintenance Manuals (CMM), service bulletins, airworthiness directives, and engineering instructions; performing functional tests, operational checks, inspections, troubleshooting, and system verification after maintenance activities; ensuring aircraft maintenance is performed according to approved procedures, engineering instructions, manufacturer requirements, maintenance programs, and regulatory standards; completing accurate maintenance records, technical logs, inspection reports, work cards, task cards, defect reports, and component documentation; identifying and reporting aircraft defects, technical discrepancies, safety concerns, and potential reliability issues; supporting aircraft defect rectification and troubleshooting activities to minimize aircraft downtime and operational disruption; coordinating with maintenance control, flight operations, engineering, planning, logistics, quality assurance, and technical services teams; supporting aircraft recovery, AOG situations, technical disruptions, and urgent maintenance requirements; inspecting and verifying replacement parts, tools, equipment, consumables, and materials before installation; ensuring components and materials meet approved specifications, traceability, certification, and airworthiness requirements; performing aircraft system testing and troubleshooting using specialized test equipment and ground-support equipment; supporting aircraft modifications, upgrades, cabin installations, structural repairs, avionics improvements, and engineering changes where authorized; participating in reliability programs by reporting recurring defects, component failures, maintenance trends, and operational issues; supporting root-cause analysis and corrective actions for recurring technical problems; maintaining tools, equipment, calibration records, maintenance areas, and technical resources in accordance with established procedures; following strict aviation safety, occupational health, environmental, human-factors, and foreign-object-debris (FOD) prevention procedures; ensuring proper handling, storage, and disposal of aircraft components, hazardous materials, fuels, chemicals, and maintenance consumables; supporting quality audits, regulatory inspections, internal investigations, and safety-management activities; utilizing digital maintenance-management systems, aircraft health-monitoring platforms, predictive maintenance technologies, electronic technical logs, data analytics, and AI-assisted fault-diagnosis tools where authorized; maintaining awareness of aircraft reliability, maintenance trends, technical notices, regulatory updates, and manufacturer recommendations; and continuously supporting aircraft safety, airworthiness, reliability, operational efficiency, and maintenance quality. Qualifications Diploma or Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Aviation Maintenance, Mechanical Engineering, Avionics, or a related discipline. Relevant aircraft maintenance license or certification appropriate to the aircraft type and applicable aviation authority is advantageous or required for certification responsibilities. Strong understanding of aircraft structures, propulsion systems, electrical systems, hydraulics, pneumatics, flight controls, avionics, fuel systems, landing gear, and aircraft maintenance practices. Strong ability to read and interpret aircraft technical manuals, engineering drawings, wiring diagrams, schematics, maintenance instructions, and technical publications. Knowledge of AMM, SRM, IPC, FIM, CMM, WDM, service bulletins, airworthiness directives, and maintenance-program documentation. Strong troubleshooting, diagnostic, mechanical, electrical, analytical, and problem-solving skills. Familiarity with aircraft maintenance-management systems, electronic technical logs, computerized maintenance systems, and digital engineering platforms. Understanding of aviation safety-management systems, human factors, risk assessment, FOD prevention, quality assurance, and maintenance safety. Knowledge of applicable aviation regulations and standards, such as ICAO, EASA, FAA, UK CAA, GCAA, or other relevant aviation authorities, depending on the operating environment. Familiarity with aircraft maintenance data analytics, predictive maintenance, aircraft health monitoring, condition-based maintenance, and digital maintenance technologies is advantageous. Ability to use specialized aircraft maintenance tools, test equipment, ground-support equipment, and diagnostic systems. Strong documentation and technical-reporting skills with high attention to accuracy and traceability. Ability to work effectively with aircraft engineers, technicians, pilots, maintenance control, operations, logistics, quality teams, manufacturers, and regulatory authorities. Strong understanding of aircraft component traceability, certification, tooling control, calibration, and maintenance records. Ability to work effectively under time pressure while maintaining strict safety and quality standards. Strong physical and operational awareness appropriate to aircraft maintenance environments. Relevant aircraft type ratings, maintenance certifications, engineering licenses, or aviation technical qualifications are highly advantageous. Strong commitment to aviation safety, airworthiness, regulatory compliance, technical accuracy, reliability, and continuous professional development.

<ul><li>Provide pre-sales support on Networks & Wireless Solutions.</li><li>Propose design and solutions to Customers and Sales, based on customer requirements, with appropriate products and technologies.</li><li>Provide the most ideal design, solution or proposal and BOM on customer requirements along with sales personnel.</li><li>Assist sales personnel to customers on their complex technical requirements for Server, Storage, Data protection, DR for on-prem and cloud.</li><li>Knowledge and design of Enterprise Servers, Blades, Storage System, HCI, Virtualization and Azure.</li><li>Design MS solutions based on AD, Exchange, SCCM, Office 365, Azure.</li><li>Knowledge of VDI Solution on Citrix and Microsoft technologies.</li><li>Provide consultation / design for projects.</li><li>Understand requirements of customers and translate them to define Scope of Work.</li><li>Define / Derive a Bill of Material based on customer requirements.</li><li>Prepare proposals with Design, Scope of Work and BOM.</li><li>Liaise with Principals on products / technologies on technical, commercials and marketing fronts.</li><li>Update and advise management on market trends and demands to keep pace with evolving technologies and customer needs.</li><li>Prepare management reports on opportunity status and devise mechanisms to bridge gaps related to competitive products, vendors and competition.</li><li>Maintain confidentiality on design, proposal and documentation of proposed solutions.</li><li>Interact with Post Sales team on evaluation of new products and technology to propose optimum designs to customers.</li><li>Conduct periodic internal presentations to Sales & Post Sales teams on products and technologies.</li><li>Achieve individual targets on product lines through Sales and Services.</li><li>Prepare reports on opportunities and achievements on proposals.</li><li>Liaise with Post Sales and advise/suggest pricing for services.</li><li>Work closely with technical team to synchronize on new products and technologies to be sold and supported.</li><li>Provide performance enhancement consultations as needed.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's or Master's degree in Computer Science, Engineering, Information Technology, or a related field.</li><li>5+ years of experience in presales, solutions architecture, or a similar client-facing technical role within enterprise systems or cloud technologies.</li><li>Proven expertise in cloud platforms (AWS, Azure, GCP) and/or major enterprise systems (ERP, CRM, SCM).</li><li>Exceptional communication, presentation, and interpersonal skills, with the ability to engage C-level executives.</li><li>Ability to travel occasionally to client sites and industry events.</li><li>Relevant certifications such as AWS Certified Solutions Architect, Microsoft Certified: Azure Solutions Architect Expert, or TOGAF.</li></ul>

Join Our Team at Eaton: Empowering Tomorrow, Today!<br><br>Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.<br><br>About Eaton<br><br>Eaton is a power management company where we provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technology and services. Eaton has approximately 96,000 employees and sells products to customers in more than 175 countries.<br><br>The Electrical Design Engineer develops standard reference designs for the Commercial & Institutional Buildings segment, combining Low Voltage, Medium Voltage, UPS, Energy Storage, and Life Safety systems into a comprehensive Eaton offering tailored to specific building types and applications. The role focuses on solving end-customer challenges by translating technical and business requirements into scalable, integrated, value-driven designs and solutions.<br><br>What You’ll Do<br><br>Work closely with the segment strategy & offer leader to map the target sub-segments/micro-segments (ex: healthcare, education, retail, mixed use...). Deliver Reference Design per sub-segments and corresponding Sales tools to help the Sales organization to promote the full Eaton offering and to increase the Share of Wallet Sales for the Commercial Building and Residential Segments. Map use cases and functionalities for the applications and their corresponding Eaton offering. Create a library of reference designs/Applications against a published and agreed roadmap. Engage the Business Unit (BU) Product Managers to help position their offering in the reference design and understand how the current roadmap will help to fill the gaps and when. Work with BU applications engineers to precisely define the specific application needs and define the best technical solution promoting Eaton capabilities Translate the reference design into detailed and visual tools (including design guides, CAD files and technical specifications), with the Marcom team, for Sales to promote the full Eaton package to their customers, consultants and end users. Work with Marcom team to support development of associated tools and content that allow effective promotion of the reference designs (ex. Webpages on secure portal, campaign assets….) Support the development and deployment of a Consultant Program led by the segment team to enable consultants and designers to access high value content (inc. reference designs). Support the specification sales teams understanding and engagement with consultants (ex. Zunos webinars explaining the reference designs, joint meetings/calls, build a community of practice…) Continuously improve and refine the reference design framework and content, based on feedback from sales/marketing teams and directly from contact with consultants/designers. Define and develop new tools to showcase our capability. Ensure continuous learnings and process improvement while developing reference designs to enable faster delivery of contents and totally integrate into Eaton process.<br><br><br>Qualifications<br><br>Bachelor’s Degree of engineering in Electrical, Power or IT or similar departments Minimum 5 years of experience in the Commercial & Institutional Buildings segment market in a technical role with customer interactions Solid knowledge of the Energy/Power Distribution products and solutions including IEC and other applicable electrical codes and standards Software skills (i.e. SCADA) Proficient in electrical design software, 3D Modeling software is a plus<br><br><br>Skills<br><br>Good knowledge of MS Office and CRM application Strong problem-solving and analytical abilities Commercial Savvy and relationship builder, trusted consultative seller Good organization, communication and project management skills Initiative and self-management skills, Digital mindset<br><br><br>What We Offer<br><br>Competitive compensation and benefits package Challenging projects in dynamic collaborative team We make your aspirations matter – Eaton encourages internal promotion, whenever possible We make your growth matter - We invest in our employees for the long term – not just with salary and benefits, but with ongoing learning and development opportunities made available through Eaton University We make your contributions matter - reliability, safety, efficiency, and sustainability are at the core of our dedication to improving people’s lives and the environment through power management technologies. We make your wellbeing matter – We put your health and safety first. Wellness at Eaton is more than a program, it’s about changing the environment by offering the right tools to help empower employees to make that happen <br><br><br>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.<br><br>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.<br><br>Ready to make a difference? Join Eaton’s Dubai Team and be part of a company shaping the future of sustainable manufacturing and power management!<br><br>We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>The Role</strong>&nbsp;</p><br><p>This is an exciting opportunity for Emirati Graduate Engineers as this role offers an excellent opportunity to work with ADNOC on diverse and challenging projects while developing your skills and gaining valuable industry experience.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood's Oil, Gas &amp; New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.&nbsp;</p><br><p>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonisation and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory. &nbsp;</p><br><p>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.&nbsp;</p><br><p><strong>What we can offer</strong>&nbsp;</p><br><ul> <li><strong>Meaningful and interesting projects:</strong> Delivered to high profile clients across the Energy Sector&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion:&nbsp;</strong>We are an organisation actively committed to diversity and inclusion across our business &nbsp;</li> <li><strong>Competitive renumeration package:</strong> With regular reviews to ensure we are rewarding at the right level in line with the market &nbsp;</li> <li><strong>Medical Insurance:</strong> Ensures inpatient, and outpatient medical care is available should you require treatment&nbsp;</li> <li><strong>Group Life and Personal Accident Insurance</strong>: The company provides Life Assurance cover&nbsp;&nbsp;</li> <li><strong>End of Service Gratuity:&nbsp;</strong>In line with UAE Labor Law, all employees are eligible for an End of Service benefit&nbsp;</li> <li><strong>The Employee Share Plan</strong>: Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones&nbsp;</li> <li><strong>Commitment to continued professional development:</strong> Development plans that are tailored to your individual needs and interests &nbsp;</li> <li><strong>Global connections</strong>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession &nbsp;</li> <li><strong>Energy Transition Academy:&nbsp;</strong>Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field&nbsp;</li></ul><p><strong>The key objectives for this role are:</strong></p><br><p>To support the successful delivery of engineering and project execution activities by assisting project teams in planning, coordination, and technical tasks. The Graduate Project Engineer will develop practical project management and engineering skills while contributing to safe, efficient, and high-quality project outcomes.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><ul> <li>Assist in the coordination and execution of engineering and project activities in line with project schedules and objectives</li> <li>Support project engineers and managers in tracking progress, deliverables, and key milestones</li> <li>Prepare and maintain project documentation, including reports, schedules, meeting minutes, and technical submissions</li> <li>Liaise with multidisciplinary engineering teams (e.g., mechanical, civil, electrical, instrumentation) to ensure alignment of project requirements</li> <li>Participate in design reviews, technical discussions, and project meetings</li> <li>Assist in monitoring project costs, timelines, and resource allocation</li> <li>Support procurement, vendor coordination, and expediting activities where required</li> <li>Ensure compliance with company procedures, client requirements, and relevant industry standards</li> <li>Contribute to risk identification, mitigation planning, and issue resolution</li> <li>Promote and adhere to health, safety, and environmental (HSE) standards at all times</li> <li>Engage in continuous learning and development to build technical and project management competencies</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Diploma or Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, Instrumentation, or related discipline)</li> <li>0–2 years of relevant experience (internships or training experience preferred).</li> <li>Basic understanding of engineering principles and project lifecycle in an EPC/EPCM environment</li> <li>Strong communication and interpersonal skills</li> <li>Good organizational skills with attention to detail</li> <li>Proficiency in Microsoft Office applications (Word, Excel, PowerPoint)</li> <li>Familiarity with project management tools (e.g., Primavera, MS Project) is an advantage</li> <li>Ability to work effectively in a team-oriented, multicultural environment</li> <li>Willingness to learn, take initiative, and adapt in a fast-paced project environment</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> United Arab Emirates </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Cost Estimation Engineer<br><br><p>KBR is a company of innovators, thinkers, creators, explorers, volunteers, and dreamers and we all share one goal of improving the World and Beyond: responsibly, and safely.</p><br><br><br><p>We attract a diverse workforce and the best minds in the world because our expertise thrives on creativity, resourcefulness, and collaboration. At KBR, we care about our employees and the community.</p><br><br><br><p>KBR is looking for <b>Specialist Cost Estimation Engineer </b>for an offshore PMC project to be based in Client office in Abu Dhabi UAE.</p><br><br><p><b>Develop detailed cost estimates during planning, tendering, and execution phases Analyze project requirements, scope, and risks to determine cost impacts. Prepare budget forecasts, cost breakdown structures (CBS), and estimates at completion. Support decision‑making through cost comparisons and financial recommendations. Monitor cost variances and provide corrective action recommendations Maintain and update cost databases and estimation standards. Participate in value engineering and cost‑optimization initiative</b></p><br><br><br><p>Candidate must have experience in Mega Offshore Projects.</p><br><br><br><p><b>Minimum Requirement</b></p><br><br><ul><li><b>Must have Overall 20+ years of experience in oil and Gas industry.</b></li><li><b>Minimum 5-8 years’ experience in Offshore Projects having FEED/ Engineering experience worked on mega value (&gt;1 billion) projects.</b></li><li><b>Bachelor’s degree in engineering is a MUST.</b></li><li><b>Previous experience with ADNOC projects is an added advantage.</b></li></ul><br><br><br><br><br> </div>

Site Engineer<br><br>Job Type: Full-time<br><br>Work Location: In person<br><br>Job Description:<br>We are looking for a qualified Site Engineer with hands-on experience in interior fit-out projects. The candidate will be responsible for site supervision, coordination, and ensuring quality execution as per project specifications and timelines.<br><br>Key Responsibilities:<br><br>*Supervise and manage day-to-day site activities for interior fit-out works.<br>*Coordinate with project managers, subcontractors, and suppliers to ensure smooth workflow.<br>*Review drawings and ensure execution as per approved designs and quality standards.<br>*Monitor progress, manpower, and materials to meet deadlines.<br>*Ensure compliance with safety regulations and company procedures.<br>*Prepare daily and weekly site reports and assist in project documentation.<br><br>Requirements:<br><br>*Interior design diploma or architecture diploma or Civil engineering degree.<br>*Minimum 3–4 years of UAE experience in interior fit-out projects.<br>*Strong knowledge of materials, finishes, and site execution methods.<br>*Ability to read drawings and manage multiple site activities.<br>*Good knowledge of Auto CAD and able to make revisions to fit-out drawings at the site office.<br>*Very strong communication in English and Hindi.<br><br>Advantage:<br><br>*HSE certifications<br>*Driving license<br>*Knowledge in MEP and HVAC<br><br>Interested candidate can apply directly at: arkoka@gridsintl.com

Resident Engineer (RE) – Civil Discipline: Civil Engineering Experience: Minimum 8+ years Key Responsibilities Supervise and monitor all civil construction activities at the project site. Ensure work is executed as per approved drawings, specifications, and contract requirements. Coordinate with contractors, consultants, and client representatives to resolve technical and site-related issues. Monitor project progress and ensure adherence to project schedules and milestones. Review contractor submissions, shop drawings, method statements, and material approvals. Conduct site inspections and ensure compliance with quality standards and HSE regulations. Verify measurements, work quantities, and contractor invoices. Monitor manpower, equipment, and resource utilization. Identify construction risks and recommend corrective actions. Attend site meetings and prepare daily, weekly, and monthly progress reports. Ensure all site documentation and records are maintained accurately. Coordinate inspections, testing, and project handover activities. Required Skills Strong knowledge of civil construction practices and project execution. Experience in site supervision and construction management. Knowledge of international construction standards and codes. Ability to interpret engineering drawings and technical specifications. Excellent coordination, communication, and leadership skills. Strong problem-solving and decision-making abilities. Qualification.<br>Bachelor's Degree in Civil Engineering. Professional Engineering certification is an added advantage.

Job Summary<br>The Section Engineer is responsible for supervising, coordinating, and controlling construction activities within assigned sections of the project to ensure works are executed in accordance with approved drawings, specifications, method statements, and project schedules. The role involves effective management of site teams and subcontractors, resolution of technical and construction issues, coordination with quality and safety teams, and proactive monitoring of progress to achieve project milestones while maintaining quality and safety standards.<br>Key Responsibilities<br>Construction Supervision & Execution<br><br>Ensure all site works within the assigned section are executed in line with approved drawings, specifications, construction programs, and method statements.<br>Supervise and coordinate Site Engineers, General Foremen, and subcontractors to ensure effective deployment of manpower, materials, plant, and equipment.<br>Monitor daily site activities to ensure productivity targets and planned sequences are achieved.<br>Resolve technical and construction-related issues promptly to avoid delays or rework.<br><br>Planning, Coordination & Progress Control<br><br>Coordinate closely with the Construction Manager and Planning team to align site activities with project schedules.<br>Identify potential delays, constraints, or interface issues and report trends to management with recommended corrective actions.<br>Maintain accurate site records, including daily progress reports, manpower logs, and equipment deployment.<br><br>Quality Assurance & Control<br><br>Ensure works comply with approved QA/QC procedures, inspection test plans (ITPs), and quality standards.<br>Coordinate with QA/QC Engineers for inspections, tests, and approvals.<br>Ensure timely completion and submission of inspection requests, checklists, and quality documentation.<br>Monitor subcontractor work quality and ensure rectification of defects or non-conformances.<br><br>Safety & Compliance<br><br>Coordinate closely with the Safety Officer to enforce site safety rules, method statements, and risk assessments.<br>Ensure all works are carried out in compliance with project HSE requirements and statutory regulations.<br>Promote safe work practices and intervene in unsafe conditions or behaviors.<br><br>Material & Resource Management<br><br>Ensure proper storage, handling, and usage of construction materials in accordance with specifications and manufacturer recommendations.<br>Verify material availability and coordinate with procurement and stores teams to avoid shortages or delays.<br>Monitor wastage and support cost control initiatives.<br><br>Inspection, Handover & Closeout<br><br>Participate in internal consultant, and client inspections.<br>Support sectional handover, snag clearance, and final completion activities.<br>Ensure as-built information and site records are accurately maintained for handover documentation.<br><br>Required Qualifications & Competencies<br><br>Bachelor’s Degree in Civil Engineering<br>7+ years of experience in civil construction projects (high-rise building projects)<br>Proven experience managing assigned project sections independently<br>Strong knowledge of civil construction methods, sequencing, and best practices<br>Ability to read, interpret, and apply drawings, specifications, BOQs, and method statements<br>Good understanding of QA/QC procedures, ITPs, inspections, and documentation<br>Experience coordinating and supervising Site Engineers, Foremen, and subcontractors<br>Working knowledge of project schedules, progress monitoring, and reporting<br>Ability to identify construction risks, delays, and interface issues and propose mitigation actions<br>Strong leadership, supervision, and team management skills<br>Effective communication and coordination skills with internal teams, subcontractors, consultants, and clients<br>Good understanding of construction HSE requirements and safe work practices<br>Proficiency in MS Office applications (Word, Excel, Power Point)<br>Working knowledge of Auto CAD and construction-related software

Job Summary<br>The Section Engineer is responsible for supervising, coordinating, and controlling construction activities within assigned sections of the project to ensure works are executed in accordance with approved drawings, specifications, method statements, and project schedules. The role involves effective management of site teams and subcontractors, resolution of technical and construction issues, coordination with quality and safety teams, and proactive monitoring of progress to achieve project milestones while maintaining quality and safety standards.<br>Key Responsibilities<br>Construction Supervision & Execution<br><br>Ensure all site works within the assigned section are executed in line with approved drawings, specifications, construction programs, and method statements.<br>Supervise and coordinate Site Engineers, General Foremen, and subcontractors to ensure effective deployment of manpower, materials, plant, and equipment.<br>Monitor daily site activities to ensure productivity targets and planned sequences are achieved.<br>Resolve technical and construction-related issues promptly to avoid delays or rework.<br><br>Planning, Coordination & Progress Control<br><br>Coordinate closely with the Construction Manager and Planning team to align site activities with project schedules.<br>Identify potential delays, constraints, or interface issues and report trends to management with recommended corrective actions.<br>Maintain accurate site records, including daily progress reports, manpower logs, and equipment deployment.<br><br>Quality Assurance & Control<br><br>Ensure works comply with approved QA/QC procedures, inspection test plans (ITPs), and quality standards.<br>Coordinate with QA/QC Engineers for inspections, tests, and approvals.<br>Ensure timely completion and submission of inspection requests, checklists, and quality documentation.<br>Monitor subcontractor work quality and ensure rectification of defects or non-conformances.<br><br>Safety & Compliance<br><br>Coordinate closely with the Safety Officer to enforce site safety rules, method statements, and risk assessments.<br>Ensure all works are carried out in compliance with project HSE requirements and statutory regulations.<br>Promote safe work practices and intervene in unsafe conditions or behaviors.<br><br>Material & Resource Management<br><br>Ensure proper storage, handling, and usage of construction materials in accordance with specifications and manufacturer recommendations.<br>Verify material availability and coordinate with procurement and stores teams to avoid shortages or delays.<br>Monitor wastage and support cost control initiatives.<br><br>Inspection, Handover & Closeout<br><br>Participate in internal consultant, and client inspections.<br>Support sectional handover, snag clearance, and final completion activities.<br>Ensure as-built information and site records are accurately maintained for handover documentation.<br><br>Required Qualifications & Competencies<br><br>Bachelor’s Degree in Civil Engineering<br>7+ years of experience in civil construction projects (high-rise building projects)<br>Proven experience managing assigned project sections independently<br>Strong knowledge of civil construction methods, sequencing, and best practices<br>Ability to read, interpret, and apply drawings, specifications, BOQs, and method statements<br>Good understanding of QA/QC procedures, ITPs, inspections, and documentation<br>Experience coordinating and supervising Site Engineers, Foremen, and subcontractors<br>Working knowledge of project schedules, progress monitoring, and reporting<br>Ability to identify construction risks, delays, and interface issues and propose mitigation actions<br>Strong leadership, supervision, and team management skills<br>Effective communication and coordination skills with internal teams, subcontractors, consultants, and clients<br>Good understanding of construction HSE requirements and safe work practices<br>Proficiency in MS Office applications (Word, Excel, Power Point)<br>Working knowledge of Auto CAD and construction-related software

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Sr.Drilling Engineer <p><strong><u>JOB TITLE : SR.DRILLING ENGINEER</u></strong></p><br><p><strong><u>Work Location <br> Abu Dhabi (with frequent offshore visits as per job requirements)<br> <br> <br> Leave Cycle<br> 150/30 – on Single status<br> <br> <br> 335/30 – on Family status (applicable after completion of Probation period)<br> <br> <br> Air Ticket<br> Round trip - Economy class provided<br> <br> <br> Medical<br> Health Insurance provided<br> <br> <br> Accommodation<br> Single-status accommodation will be provided during the period of single status.<br> <br> <br> Contract Type <br> Contract Hire - Limited 1.5 years (extendable subject to the operational requirement)<br> <br> <br> Working Hours<br> Abu Dhabi – 07:00 to 15:00 (5 days a week)<br> <br> <br> Offshore - 06:30 to 18:30 (1-hour lunch break), 7 days a week<br> <br> <br> Salary Range<br> AED 14,000 to 16,000 per month + Offshore allowance (Applicable only for the actual days worked offshore)<br> <br> <br> Probation Period<br> 6 Months<br> <br> <br> Status<br> Family status benefits will become applicable upon successful completion of the probationary period.<br> <br> <br> Qualification (minimum)<br> Bachelor in Petroleum Engineering or equivalent.<br> <br> <br> Excellent command of English with strong verbal and written communication skills.<br> <br> <br> Experience (minimum)<br> Extensive experience (5+ years) in petroleum engineering within the oil &amp; gas industry.<br> <br> <br> Hands‑on experience in wireline operations.<br> <br> <br> Specialisation in ESP (Electrical Submersible Pump) completion design and operations.<br> <br> <br> Job Description<br> * Plan and supervise rig‑based well operations, including ESP design, installation, commissioning, and acid stimulation activities.<br> <br> <br> * Lead completion optimisation activities, with a strong focus on ESP performance improvement and reliability enhancement.<br> <br> <br> * Plan and supervise rig‑less operations, including wireline and slickline interventions, and interpret acquired data for well intervention decisions.<br> <br> <br> * Analyse production performance and behaviour, manage production data, and propose technical solutions to optimise well and field production.<br> <br> <br> * Interpret pressure and well test data to evaluate reservoir and well performance and support production optimisation initiatives.<br> <br> <br> * Prepare and manage annual budgets, monitor expenditure, and ensure effective cost control for production and intervention activities.<br> <br> <br> * Ensure full compliance with HSE, quality, and environmental standards during all well operations and production activities.<br> <br> <br> Additional requirements<br> * In‑depth knowledge and hands‑on experience in ESP completion design and operations.<br> <br> <br> * Strong understanding of drilling, completion, wireline, and general oilfield operations.<br> <br> <br> * Proven experience in planning, supervising, coordinating, and evaluating slickline operations.<br> <br> <br> * Strong project management capability with effective problem‑solving and decision‑making skills.<br> <br> <br> * Good team leadership, analytical and communication skills, with familiarity in production data management and interpretation tools and proficiency in MS Office.<br></u></strong></p><br> <br> <br> </div>