Equipment operator Jobs
8463 Jobs Found
<ul><li><p>Prepare and organize clinical areas (inclusive of waiting areas) for patient presence, consultations and procedures.</p></li><li><p>Provide non-interventional assistance to licensed healthcare professionals during medical examinations and treatments (eg. chaperoning, consumable/room preparation and turn around)</p></li><li><p>When trained and competent, perform basic patient care tasks, such as helping with mobility, bed making and personal hygiene, all at the instruction and supervision of the licensed healthcare professional.</p></li><li><p>When trained and competent, ensure medical equipment is sterilized and cleaned and ready for use according to NMC Policy.</p></li><li><p>Manage patient records, updating information and ensuring confidentiality and data protection.</p></li><li><p>Schedule patient appointments and handle admissions/discharges, inclusive of follow up discharge phone calls</p></li><li><p>Monitor inventory of medical supplies and restock as needed.</p></li><li><p>Provide emotional support and clear communication to patients and families when required and following the instruction of the healthcare professional.</p></li><li><p>Adhere to all safety, health, and infection control procedures.</p></li><li><p>Speak up, if something isn't right. </p></li><li><p>Maintain awareness of and comply with, the NMC Policies and Procedures </p></li><li><p>Participate in all activities related to DOH/DHA/MOH/MOHAP and NMC Quality Improvement when required </p></li><li><p>Understand Uphold the regulatory and accreditation standards and which of them apply to their daily working practice</p></li><li><p>Support in the escort of patients within and between departments</p></li><li><p>Transport patient specimens in accordance to NMC Policy. </p></li><li><p>Strictly adhere to the regulator Scope of Practice.</p></li><li><p>Escalate and raise concerns using the incident reporting system.</p></li></ul><p><strong><u>Infection Prevention and Control (IPC): </u></strong></p><ul><li><p>IPC is everyone’s responsibility. All staff are required to read and implement the NMC IPC Policy and Strategy in an effort to maintain the highest possible standards of cleanliness at all times, thus reducing the risk of infection in patients, staff and visitors. </p></li><li><p>The strictest hand hygiene compliance encompassing, 5 moments of hand hygiene, bare below the elbows and environmental care, will be expected of all staff, including the post holder, at all times.<strong> </strong></p></li></ul><p><strong><u>Occupational Safety and Health Management Systems (OSHMS) </u></strong></p><ul><li><p>Comply with OSHMS instructions, policies and safe working procedures </p></li><li><p>Use of appropriate personal protective equipment and safety systems. </p></li><li><p>Be familiar with emergency and evacuation procedures </p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety </p></li><li><p>Assist with the preparation of risk assessments </p></li><li><p>Report OSH Hazards, incidents, Near misses and issues </p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible </p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills. </p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education and Certification </strong></p><ul><li><p>High school diploma or equivalent (some employers may require additional certification or training)</p><br></li></ul><p><strong>Knowledge and Skills</strong></p><ul><li><p>Knowledge of basic clinical procedures and healthcare practices.</p></li><li><p>Ability to use medical equipment and understand safety protocols.</p></li><li><p>Strong communication skills for interacting with patients, families, and healthcare staff.</p></li><li><p>Organizational skills for managing records and scheduling appointments.</p></li><li><p>Attention to detail and the ability to follow clinical instructions accurately.</p></li><li><p>Basic IT skills for handling medical software and patient databases.</p></li><li><p>Physical stamina for assisting with patient care and clinical tasks.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>1 year experience in relevant role of healthcare experience in UAE will be an advantage</p></li></ul>
<ul><li><p>Prepare and organize clinical areas (inclusive of waiting areas) for patient presence, consultations and procedures.</p></li><li><p>Provide non-interventional assistance to licensed healthcare professionals during medical examinations and treatments (eg. chaperoning, consumable/room preparation and turn around)</p></li><li><p>When trained and competent, perform basic patient care tasks, such as helping with mobility, bed making and personal hygiene, all at the instruction and supervision of the licensed healthcare professional.</p></li><li><p>When trained and competent, ensure medical equipment is sterilized and cleaned and ready for use according to NMC Policy.</p></li><li><p>Manage patient records, updating information and ensuring confidentiality and data protection.</p></li><li><p>Schedule patient appointments and handle admissions/discharges, inclusive of follow up discharge phone calls</p></li><li><p>Monitor inventory of medical supplies and restock as needed.</p></li><li><p>Provide emotional support and clear communication to patients and families when required and following the instruction of the healthcare professional.</p></li><li><p>Adhere to all safety, health, and infection control procedures.</p></li><li><p>Speak up, if something isn't right. </p></li><li><p>Maintain awareness of and comply with, the NMC Policies and Procedures </p></li><li><p>Participate in all activities related to DOH/DHA/MOH/MOHAP and NMC Quality Improvement when required </p></li><li><p>Understand Uphold the regulatory and accreditation standards and which of them apply to their daily working practice</p></li><li><p>Support in the escort of patients within and between departments</p></li><li><p>Transport patient specimens in accordance to NMC Policy. </p></li><li><p>Strictly adhere to the regulator Scope of Practice.</p></li><li><p>Escalate and raise concerns using the incident reporting system.</p></li></ul><p><strong><u>Infection Prevention and Control (IPC): </u></strong></p><ul><li><p>IPC is everyone’s responsibility. All staff are required to read and implement the NMC IPC Policy and Strategy in an effort to maintain the highest possible standards of cleanliness at all times, thus reducing the risk of infection in patients, staff and visitors. </p></li><li><p>The strictest hand hygiene compliance encompassing, 5 moments of hand hygiene, bare below the elbows and environmental care, will be expected of all staff, including the post holder, at all times.<strong> </strong></p></li></ul><p><strong><u>Occupational Safety and Health Management Systems (OSHMS) </u></strong></p><ul><li><p>Comply with OSHMS instructions, policies and safe working procedures </p></li><li><p>Use of appropriate personal protective equipment and safety systems. </p></li><li><p>Be familiar with emergency and evacuation procedures </p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety </p></li><li><p>Assist with the preparation of risk assessments </p></li><li><p>Report OSH Hazards, incidents, Near misses and issues </p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible </p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills. </p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education and Certification </strong></p><ul><li><p>High school diploma or equivalent (some employers may require additional certification or training)</p><br></li></ul><p><strong>Knowledge and Skills</strong></p><ul><li><p>Knowledge of basic clinical procedures and healthcare practices.</p></li><li><p>Ability to use medical equipment and understand safety protocols.</p></li><li><p>Strong communication skills for interacting with patients, families, and healthcare staff.</p></li><li><p>Organizational skills for managing records and scheduling appointments.</p></li><li><p>Attention to detail and the ability to follow clinical instructions accurately.</p></li><li><p>Basic IT skills for handling medical software and patient databases.</p></li><li><p>Physical stamina for assisting with patient care and clinical tasks.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>1 year experience in relevant role of healthcare experience in UAE will be an advantage</p></li></ul><p><br></p>
<ul><li><p>Microbiology technicians record detailed observations and test results accurately. They maintain meticulous records of experiments and contribute to data analysis under the guidance of senior microbiologists. </p></li><li><p>Provide support to microbiologists and researchers by assisting in experimental procedures, literature reviews, and data interpretation. They may also contribute to ongoing research projects by conducting experiments and analysing results. </p></li><li><p>Participate in quality control procedures to ensure the accuracy and reliability of laboratory results. This involves following standardized protocols, calibrating equipment, and maintaining laboratory hygiene and safety standards. </p></li><li><p>Performs other related duties as may be assigned either in support of division goal or for his/her personal or professional training, education or development as programmed by laboratory manager. </p></li><li><p>All work to be carried out in accordance with the Company Health, Safety, Environmental and Quality Systems. </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Proficiency in basic laboratory techniques such as aseptic technique, pipetting, sample preparation, microscopy, and sterile technique is essential. Technicians should be adept at handling laboratory equipment and following standard operating procedures (SOPs) </p></li><li><p>Must understand good aseptic techniques, workplace health, safety and environmental responsibilities. </p></li><li><p>Carrying out standard microbiological analysis by culture methods such as most probable number (MPN) </p></li><li><p>Experience in use of molecular microbiology methods (MM) such as DNA extraction / purification, PCR and qPCR and other techniques is an advantage. </p></li><li><p>Preparing microbiological cultures and growth media, and also chemical samples and test solutions using general chemical laboratory techniques such as; use of micropipettes, 4 figure balances, dilution methods and calculation of solution concentrations </p></li><li><p>Preparation, maintenance, and operation of a variety of laboratory equipment including wet chemistry meters, autoclaves, incubators, centrifuges and others. </p></li><li><p>Preparation of samples for examination including microscopy and photography of samples and some chemical analysis techniques </p></li><li><p>Safe handling and use of hazardous and non-hazardous bottled gases including hydrogen sulfide. </p></li><li><p>Maintaining accurate records of analysis, observations, and calculations. Compile and complete laboratory test sheets and analysis reports. </p></li><li><p>Perform duties in compliance at all times with corporate and local systems, rules and procedures, including any Quality Assurance, Risk Assessments, Health Safety and Environmental Standards (for example, UKAS ISO 17025, ISO 9001, ISO 14001 and OHSAS 18001) set by the Company and/or external certification authorities. </p></li><li><p>Actively participate and follow company’s HSE, Compliance, Quality Assurance and other business control requirements (Compliance & Code of Ethics) which are mandatory or voluntary. </p></li><li><p>Apply discretionary effort in support of the smooth running of projects and the laboratories. </p></li><li><p>On the job training will be provided but some experience with microbiology and general laboratory practices would be an advantage </p></li></ul><p><strong>Qualifications, Experience, Skills and Knowledge: </strong></p><ul><li><p>Diploma or Degree program in Microbiology, Biochemistry or Similar Biomedical Science as a minimum. </p></li><li><p>Knowledge in oilfield microbiology and/or molecular microbiology will be an advantage. </p></li><li><p>Should have completed their studies (i.e. currently not enrolled in fulltime studies) </p></li><li><p>Experience: min 1 year experience in laboratory environment. </p></li><li><p>Must be able to read, understand and follow work instructions in a safe, accurate and timely manner and ensure full compliance with the Company Health, Safety, Environmental and Quality Systems. </p></li></ul><br><br><br><p><br></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<b>Job Purpose</b> <br><p><span>The successful candidate will assist the Engineer in carrying out airframe and engine maintenance tasks on Air Arabia and third-party aircraft. The role includes supporting inspections, repairs, defect rectification, and component replacement to ensure aircraft serviceability and operational readiness.</span></p><br><br><br><p><span>The position is responsible for performing assigned maintenance activities and recording completed work accurately and in a timely manner, in full compliance with Air Arabia procedures and applicable regulatory requirements, maintaining the required standards of safety and airworthiness.</span></p><br><br><b>Key Result Responsibilities</b> <br><span><strong>Operational Excellence</strong></span><br><ul><li><span>Reviews assigned task cards with the Engineer-in-Charge to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work. </span></li><li><span>Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</span></li><li><span>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</span></li><li><span>Carries out repairs, component replacements and tests as instructed by assigned task cards fully in accordance with approved data and procedures and as directed by the Engineer-in-Charge.</span></li><li><span>Ensures proper tooling / equipment is drawn from stores to perform tasks, returning all of it in good condition following completion of work.</span></li><li><span>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with aircraft condition or with the execution of the work.</span></li><li><span>Demonstrates high level of consideration to housekeeping standards in all tasks performed.<br></span></li></ul><br><span><strong>Safety</strong></span><br><ul><li><span>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</span></li><li><span>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</span></li><li><span>Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.</span></li></ul><br><span><strong>Reputation and Teamwork</strong></span><br><ul><li><span>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks.</span></li><li><span>Representing Air Arabia: presents a positive and competent image of technical professionalism to other companies’ personnel and customers.</span></li></ul><br><span><strong>Cost Awareness</strong></span><br><ul><li><span>Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</span></li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span><span><span><span>Qualified and experienced Civil Aircraft Maintenance Technician.</span></span></span></span></li><li><span><span><span><span>Ability to read, write, speak and understand English to a good standard for technical communications.</span></span></span></span></li><li><span><span><span><span>Able to demonstrate solid basic understanding of Avionics maintenance theory and practice.</span></span></span></span></li><li><span><span>Ability to obtain UAE Driver’s License.</span></span></li></ul><br><b>Work Experience</b> <br><ul><li><span><span><span><span>At least 2 years’ experience performing maintenance on large commercial aircraft, preferably Airbus types.</span></span></span></span></li><li><span><span><span><span>At least 2 years’ experience in a Line Maintenance environment.</span></span></span></span></li><li><span><span><span><span>Good Avionics Maintenance Knowledge and experience.</span></span></span></span></li><li><span><span><span><span>Able to demonstrate solid basic understanding of Avionics Systems Maintenance theory and practice</span></span></span></span></li><li><span><span><span><span>Competent using specialised Avionics test equipment, computers and software tools.</span></span></span></span></li></ul><br><br> </div>
<ul><li><p>Prepare and organize clinical areas (inclusive of waiting areas) for patient presence, consultations and procedures.</p></li><li><p>Provide non-interventional assistance to licensed healthcare professionals during medical examinations and treatments (eg. chaperoning, consumable/room preparation and turn around)</p></li><li><p>When trained and competent, perform basic patient care tasks, such as helping with mobility, bed making and personal hygiene, all at the instruction and supervision of the licensed healthcare professional.</p></li><li><p>When trained and competent, ensure medical equipment is sterilized and cleaned and ready for use according to NMC Policy.</p></li><li><p>Manage patient records, updating information and ensuring confidentiality and data protection.</p></li><li><p>Schedule patient appointments and handle admissions/discharges, inclusive of follow up discharge phone calls</p></li><li><p>Monitor inventory of medical supplies and restock as needed.</p></li><li><p>Provide emotional support and clear communication to patients and families when required and following the instruction of the healthcare professional.</p></li><li><p>Adhere to all safety, health, and infection control procedures.</p></li><li><p>Speak up, if something isn't right. </p></li><li><p>Maintain awareness of and comply with, the NMC Policies and Procedures </p></li><li><p>Participate in all activities related to DOH/DHA/MOH/MOHAP and NMC Quality Improvement when required </p></li><li><p>Understand Uphold the regulatory and accreditation standards and which of them apply to their daily working practice</p></li><li><p>Support in the escort of patients within and between departments</p></li><li><p>Transport patient specimens in accordance to NMC Policy. </p></li><li><p>Strictly adhere to the regulator Scope of Practice.</p></li><li><p>Escalate and raise concerns using the incident reporting system.</p></li></ul><p><strong><u>Infection Prevention and Control (IPC): </u></strong></p><ul><li><p>IPC is everyone’s responsibility. All staff are required to read and implement the NMC IPC Policy and Strategy in an effort to maintain the highest possible standards of cleanliness at all times, thus reducing the risk of infection in patients, staff and visitors. </p></li><li><p>The strictest hand hygiene compliance encompassing, 5 moments of hand hygiene, bare below the elbows and environmental care, will be expected of all staff, including the post holder, at all times.<strong> </strong></p></li></ul><p><strong><u>Occupational Safety and Health Management Systems (OSHMS) </u></strong></p><ul><li><p>Comply with OSHMS instructions, policies and safe working procedures </p></li><li><p>Use of appropriate personal protective equipment and safety systems. </p></li><li><p>Be familiar with emergency and evacuation procedures </p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety </p></li><li><p>Assist with the preparation of risk assessments </p></li><li><p>Report OSH Hazards, incidents, Near misses and issues </p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible </p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills. </p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education and Certification </strong></p><ul><li><p>High school diploma or equivalent (some employers may require additional certification or training)</p><br></li></ul><p><strong>Knowledge and Skills</strong></p><ul><li><p>Knowledge of basic clinical procedures and healthcare practices.</p></li><li><p>Ability to use medical equipment and understand safety protocols.</p></li><li><p>Strong communication skills for interacting with patients, families, and healthcare staff.</p></li><li><p>Organizational skills for managing records and scheduling appointments.</p></li><li><p>Attention to detail and the ability to follow clinical instructions accurately.</p></li><li><p>Basic IT skills for handling medical software and patient databases.</p></li><li><p>Physical stamina for assisting with patient care and clinical tasks.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>1 year experience in relevant role of healthcare experience in UAE will be an advantage</p></li></ul><p><br></p>
<ul><li><p>Prepare and organize clinical areas (inclusive of waiting areas) for patient presence, consultations and procedures.</p></li><li><p>Provide non-interventional assistance to licensed healthcare professionals during medical examinations and treatments (eg. chaperoning, consumable/room preparation and turn around)</p></li><li><p>When trained and competent, perform basic patient care tasks, such as helping with mobility, bed making and personal hygiene, all at the instruction and supervision of the licensed healthcare professional.</p></li><li><p>When trained and competent, ensure medical equipment is sterilized and cleaned and ready for use according to NMC Policy.</p></li><li><p>Manage patient records, updating information and ensuring confidentiality and data protection.</p></li><li><p>Schedule patient appointments and handle admissions/discharges, inclusive of follow up discharge phone calls</p></li><li><p>Monitor inventory of medical supplies and restock as needed.</p></li><li><p>Provide emotional support and clear communication to patients and families when required and following the instruction of the healthcare professional.</p></li><li><p>Adhere to all safety, health, and infection control procedures.</p></li><li><p>Speak up, if something isn't right. </p></li><li><p>Maintain awareness of and comply with, the NMC Policies and Procedures </p></li><li><p>Participate in all activities related to DOH/DHA/MOH/MOHAP and NMC Quality Improvement when required </p></li><li><p>Understand Uphold the regulatory and accreditation standards and which of them apply to their daily working practice</p></li><li><p>Support in the escort of patients within and between departments</p></li><li><p>Transport patient specimens in accordance to NMC Policy. </p></li><li><p>Strictly adhere to the regulator Scope of Practice.</p></li><li><p>Escalate and raise concerns using the incident reporting system.</p></li></ul><p><strong><u>Infection Prevention and Control (IPC): </u></strong></p><ul><li><p>IPC is everyone’s responsibility. All staff are required to read and implement the NMC IPC Policy and Strategy in an effort to maintain the highest possible standards of cleanliness at all times, thus reducing the risk of infection in patients, staff and visitors. </p></li><li><p>The strictest hand hygiene compliance encompassing, 5 moments of hand hygiene, bare below the elbows and environmental care, will be expected of all staff, including the post holder, at all times.<strong> </strong></p></li></ul><p><strong><u>Occupational Safety and Health Management Systems (OSHMS) </u></strong></p><ul><li><p>Comply with OSHMS instructions, policies and safe working procedures </p></li><li><p>Use of appropriate personal protective equipment and safety systems. </p></li><li><p>Be familiar with emergency and evacuation procedures </p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety </p></li><li><p>Assist with the preparation of risk assessments </p></li><li><p>Report OSH Hazards, incidents, Near misses and issues </p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible </p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills. </p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education and Certification </strong></p><ul><li><p>High school diploma or equivalent (some employers may require additional certification or training)</p><br></li></ul><p><strong>Knowledge and Skills</strong></p><ul><li><p>Knowledge of basic clinical procedures and healthcare practices.</p></li><li><p>Ability to use medical equipment and understand safety protocols.</p></li><li><p>Strong communication skills for interacting with patients, families, and healthcare staff.</p></li><li><p>Organizational skills for managing records and scheduling appointments.</p></li><li><p>Attention to detail and the ability to follow clinical instructions accurately.</p></li><li><p>Basic IT skills for handling medical software and patient databases.</p></li><li><p>Physical stamina for assisting with patient care and clinical tasks.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>1 year experience in relevant role of healthcare experience in UAE will be an advantage</p></li></ul><p><br></p>
<br><p><strong>About the job</strong></p><br><p><strong>Join Our Team as a Certified Audi Repair Technician!</strong></p><p>"Are you a skilled and passionate automotive professional who takes pride in diagnosing and repairing vehicles with precision? Do you thrive in a fast-paced workshop environment and have a strong commitment to quality and safety? If so, we’d love to have you join our team as a technician!"</p><br><p><strong>About us</strong></p><p>Since 1976, Al Nabooda Automobiles has been committed to delivering excellence by offering our customers a diverse range of products and services that meet the high standards of the prestigious brands we represent. Our ongoing investment in premium service equipment and our team of dedicated and skilled professionals have cultivated a growing base of satisfied customers.</p><p>Al Nabooda Automobiles LLC is the exclusive authorized distributor for Audi, Porsche, and Volkswagen in Dubai and the Northern Emirates.</p><p>With twelve state-of-the-art showrooms and service centres across Dubai, Sharjah, and Fujairah, our expert workforce is focused on maintaining exceptional service and quality standards.</p><br><p><strong>Job Purpose</strong></p><p>To diagnose, repair and service the range of Audi vehicles in accordance with principal work specifications ensuring each customer receives excellent customer service. Ensure that work is completed to the highest possible standard, and within agreed timescales to ensure customer satisfaction.</p><br><p><strong>What You'll Do:</strong></p><p><strong>1- Diagnosing</strong></p><ul><li><p>Using diagnostic equipment and a systemic approach, ensure vehicles faults are diagnosed and rectified.</p></li><li><p>Check level and quality of work through use of diagnostic equipment and road-testing vehicles after work has been carried out, liaise with Service Advisor to advise on additional work and timescales for completion.</p></li><li><p>Work with other workshop and Service Advisors colleagues to provide excellent customer service, share best practice.</p></li></ul><br><p><strong>2- Repairs</strong></p><ul><li><p>Overhaul, repair and re-assemble complex mechanical components as required, ensuring that work is completed to the highest possible standard and within agreed timescales.</p></li><li><p>Identify and correct any wheel alignment problems.</p></li></ul><br><p><strong>3- Warranty</strong></p><ul><li><p>Identify any work required that is covered by the warranty process, ensure all documentation is complete, coordinate with warranty department.</p></li><li><p>Complete relevant service documentation (Job sheets, PDI’s, Service Report) in line with warranty and dealer requirements.</p></li></ul><br><p><strong>4- Operational</strong></p><ul><li><p>Maintain workshop housekeeping standards at all times including the use of special and personal tools.</p></li><li><p>Ensure that all work is carried out observing safe working practices of self and others.</p></li><li><p>Attend regular staff meetings, using them as a basis for the communication of any ideas for improvement in processes or cost savings.</p></li></ul><br><p><strong>5- Personal Development</strong></p><ul><li><p>Practice personal continuous improvement by attending any relevant courses, assimilate information provided on new product lines and develop an understanding of the latest technology, and how to diagnose and repair faults.</p></li><li><p>Arrange an annual appraisal with your line manager in accordance with the company’s appraisal process.</p></li></ul><br><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Why Join Us?</strong></p><ul><li><p>Competitive salary with performance-based bonuses.</p></li><li><p>Comprehensive benefits package including health insurance and more.</p></li><li><p>Opportunities for professional development and career advancement.</p></li><li><p>A vibrant company culture that values teamwork and innovation.</p></li></ul><br><p><strong>What you will need</strong></p><ul><li><p>Automotive Diploma</p></li><li><p>Basic Manufacturers training completed successfully</p></li><li><p>Advanced Manufacturers training completed successfully</p></li></ul><br><br><p><strong>Benefits found in job post</strong></p><p>Medical insurance</p>
The Laboratory Engineer is responsible for delivering safe, efficient, and reliable PSD to customers. The Laboratory Engineer identifies continuous improvement opportunities during service delivery, implements standard work, and manages risk during service delivery. This person interfaces with the customer to apply the appropriate fluid design, and identifies opportunities to introduce new technology solutions and applications.<br><br>Ensure job deliverables are accurate and delivered on time. Perform advanced additive selection for fluid design and recommend solutions to improve the process. Perform procedural and process improvement plan feasibility, development, and implementation within the laboratory and fluid testing domains. Ensure that laboratory equipment is in clean, working condition and that waste is regularly disposed. Monitor the operation, maintenance, and calibration of laboratory equipment. Prepare technical presentations for internal and external customers. Perform regular audits to ensure the laboratory operates according to required standards. Assist the Design/Technical Engineer and Product Champions with technical support as required. Perform a Risk Analysis before each task/job to identify and mitigate potential safety or quality concerns. Participate in Service Quality Meetings with customers and improve performance using action plans. Participate in HSE and Quality initiatives. Wear PPE and observe HSE policies. Maintain the required safety training.<br><br>Experience for Lab Engineer – Minimum 3 years of experience in handling the analytical equipment.<br><br>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.
Position :- Photographer & Videographer Required for Construction Company Location :- Al Barsha , Dubai <br>Job Summary :- We are seeking a skilled and creative Photographer & Videographer to capture high-quality visual content for our construction projects. The ideal candidate will have experience in construction, architecture, or real estate photography and the ability to create engaging content for digital marketing and social media platforms.<br>Key Responsibilities:Capture high-quality interior and exterior photographs and videos of residential, villa and commercial construction projects Shoot, edit, and deliver professional-quality property photos, videos, and promotional content Create engaging content for websites and social media platforms, including reels, project updates, and marketing materials Manage the complete production process, including lighting, sound, equipment setup, filming, and post-production editing Capture construction progress, project milestones, site activities, and architectural details while following safety guidelines<br> Requirements:2-3 years of proven experience in construction, architecture, or real estate photography and videography (portfolio required) Proficiency with DSLR/mirrorless cameras, drones, gimbals, lighting equipment, and audio recording gear Strong portfolio demonstrating high-quality construction and property visual content Advanced editing skills using Adobe Lightroom, Photoshop, Premiere Pro, After Effects, or similar software Own camera/video equipment preferred Creative eye for composition, storytelling, and producing engaging marketing content Ability to work independently and manage on-site shoots efficiently<br>Salary :- 5k AED -6k AED+ other benefits as per UAE labor law<br>Interested candidates are invited to share their cv, portfolio, previous project samples on :- Whats App :- +971585352131Email :- info@place-mint.ae
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Apt Resources is seeking dedicated Private Groundkeeper to join a prestigious 5-Star Luxury Hotel on the Red Sea, Saudi Arabia.<br> As a Groundkeeper, you will be responsible for maintaining the hotel's magnificent outdoor grounds, ensuring they are immaculate and inviting for guests.<br> Your role will involve the upkeep of lawns, gardens, walkways, and exterior features to uphold the hotel's high standards of appearance and safety.<br> Joining this renowned hotel offers an excellent opportunity to contribute to a world-class hospitality environment where attention to detail and exceptional service are paramount.<br> Responsibilities Maintain and care for the hotel's outdoor grounds, including lawns, flower beds, shrubs, and trees.<br> Operate and maintain landscaping equipment and tools safely and efficiently.<br> Perform regular inspections and report any issues related to the grounds or equipment.<br> Ensure walkways, paths, and outdoor areas are clean, safe, and free of debris.<br> Implement seasonal planting, watering, fertilizing, and pest control as required.<br> Collaborate with the hotel maintenance and landscaping teams to coordinate activities.<br> As per the market standards Previous experience as a groundkeeper, landscaper, or gardener, preferably within luxury hotels or high-end properties.<br> Knowledge of lawn care, planting, irrigation, and pest control techniques.<br> Ability to operate landscaping machinery and tools safely.<br> Strong attention to detail and commitment to maintaining high standards.<br> Physical fitness and ability to perform outdoor manual labor in various weather conditions.<br> Good communication skills and ability to work both independently and as part of a team.<br> Flexibility to work shifts, including weekends and holidays if required.<br> Must be currently in UAE</span> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are looking for a proactive and reliable <b>IT Support Specialist</b> to join our growing marketing company.</p><p>If you enjoy solving technical issues, helping people, and keeping systems running smoothly, this could be the right opportunity for you. You will work closely with our team, providing day-to-day technical support and ensuring that employees have everything they need to work efficiently.</p><p>Your Responsibilities:</p><ul><li>Provide first-line IT support to employees and resolve technical issues</li><li>Set up and maintain computers, laptops, software, and user accounts</li><li>Troubleshoot hardware, software, network, and connectivity issues</li><li>Install, configure, and update software and applications</li><li>Manage user access, permissions, and company IT accounts</li><li>Monitor and maintain office IT equipment and infrastructure</li><li>Assist employees with technical questions and provide clear guidance</li><li>Work with external IT providers and vendors when required</li><li>Maintain basic IT documentation and keep track of equipment</li><li>Help ensure the security and smooth operation of the company's IT environment</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>What We’re Looking For:</p><ul><li>Previous experience in <b>IT Support / Help Desk / Technical Support</b></li><li>Good knowledge of Windows, Microsoft Office, and common business software</li><li>Basic understanding of networks, hardware, and troubleshooting</li><li>Strong problem-solving and analytical skills</li><li>Excellent communication and interpersonal skills</li><li>Ability to work independently and prioritize tasks</li><li>Proactive attitude and willingness to learn</li><li>Good level of <b>English</b>, both written and spoken</li></ul><p><br></p><p>What We Offer:</p><ul><li>Competitive salary based on experience</li><li>Professional and friendly working environment</li><li>Opportunity to work in a dynamic international marketing company</li><li>Career growth and professional development opportunities</li><li>Supportive team and modern working environment</li><li>Interesting and diverse technical challenges</li><li>Training and onboarding to help you succeed in the role</li></ul><p><br></p></div>
<br><p>We are looking for a motivated and technically inclined <strong>Service Engineer – Fresher</strong> to join our Service & Technical Support team. The ideal candidate should have a strong foundation in mechanical engineering, good problem-solving skills, and a willingness to learn about machinery, installation, maintenance, and troubleshooting.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Assist senior service engineers with <strong>installation, commissioning, maintenance, and troubleshooting</strong> of machinery.</p></li><li><p>Conduct inspections and identify mechanical faults or technical issues.</p></li><li><p>Support preventive and corrective maintenance activities.</p></li><li><p>Assist in diagnosing machine breakdowns and implementing appropriate solutions.</p></li><li><p>Read and understand <strong>mechanical drawings, manuals, and technical specifications</strong>.</p></li><li><p>Perform basic machine testing and ensure equipment is functioning properly.</p></li><li><p>Visit customer sites to provide technical and after-sales support when required.</p></li><li><p>Maintain service reports, installation records, and maintenance documentation.</p></li><li><p>Coordinate with the Service, Sales, and Technical teams to resolve customer issues.</p></li><li><p>Follow all company safety procedures and technical standards.</p></li><li><p>Continuously develop knowledge of the company's machines, tools, and equipment.</p><br></li></ul><p>Preferred Skills</p><ul><li><p>Basic knowledge of <strong>AutoCAD / SolidWorks</strong> or other engineering software.</p></li><li><p>Knowledge of pumps, motors, gear systems, bearings, pneumatics, or similar mechanical components.</p></li><li><p>Hands-on experience through academic projects, internships, or industrial training will be an advantage.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in <strong>Mechanical Engineering</strong>/<strong> Electronics/ Mechatronics</strong></p></li><li><p>Fresh graduates are encouraged to apply.</p></li><li><p>Strong interest in <strong>machinery, maintenance, and technical troubleshooting</strong>.</p></li><li><p>Basic knowledge of mechanical systems and engineering principles.</p></li><li><p>Ability to read mechanical drawings and technical manuals.</p></li><li><p>Good analytical and problem-solving skills.</p></li><li><p>Good communication and interpersonal skills.</p></li><li><p>Willingness to travel to customer sites as required.</p></li><li><p>Ability to work independently as well as part of a team.</p></li><li><p><strong>UAE driving license</strong> is an advantage but not mandatory</p></li></ul>
<p>We are seeking a skilled and experienced Lifting Appointed Person to join our dynamic team on a prestigious high-speed rail project in Abu Dhabi. The successful candidate will be responsible for overseeing all lifting operations, ensuring safety compliance, and coordinating with site teams to guarantee efficient and risk-free lifting activities.
Responsibilities:
- Plan, supervise, and authorize all lifting operations on site in adherence to safety regulations and company policies.
- Conduct thorough risk assessments and method statements for lifting activities.
- Inspect lifting equipment and certify its suitability for use before operations commence.
- Coordinate with riggers, crane operators, and site managers to ensure smooth execution of lifting tasks.
- Maintain detailed records of lifting operations and generate regular safety reports.
- Provide training and guidance to lifting teams to promote safe working practices.
- Act as the main point of contact for lifting-related incidents and implement corrective actions promptly.
- Ensure compliance with UAE health and safety laws and international best practices related to lifting operations.</p><p>- Proven experience as a Lifting Appointed Person in large-scale construction projects, preferably within high-speed rail or infrastructure sectors.
- Certified competence in lifting operations and relevant safety training qualifications.
- Strong knowledge of lifting equipment, rigging practices, and relevant safety standards.
- Excellent organizational and leadership skills with the ability to manage multiple activities under pressure.
- Proficient in preparing risk assessments, method statements, and safety documentation.
- Effective communication skills in English; Arabic language skills are a plus.
- Ability to work collaboratively within diverse teams and multicultural environments.
- Willingness to relocate and work on-site in Abu Dhabi for the project duration.
-LEEA Certificate is mandatory.</p>
<p>Manage QA/QC activities for <strong>civil infrastructure, wet utilities, and substation projects</strong> in accordance with approved project requirements.</p><p>Ensure construction works comply with <strong>approved drawings, specifications, ITPs, method statements, and authority requirements including DEWA/TAQA</strong>.</p><p>Conduct inspections for <strong>drainage, sewerage, stormwater, potable water, substation foundations, control buildings, cable trenches, equipment foundations, and associated civil works</strong>.</p><p>Prepare and coordinate <strong>IRs, MIRs, test reports, inspection records, and quality documentation</strong>.</p><p>Coordinate with consultants, DEWA,TAQA, clients, site teams, and subcontractors for inspections, approvals, and quality-related matters.</p><p>Monitor material quality and ensure all materials are approved and comply with project specifications before use at site.</p><p>Conduct and monitor required testing including <strong>pipeline and pressure testing, compaction, concrete, soil, waterproofing, and other civil tests</strong>.</p><p>Identify non-conformities and ensure timely <strong>NCR closure and implementation of corrective actions</strong>.</p><p>Review and implement <strong>Quality Plans, ITPs, method statements, checklists, and inspection procedures</strong> for infrastructure and substation works.</p><p>Maintain complete QA/QC records and ensure all documentation is properly compiled for <strong>project handover and authority approvals</strong>.</p><p>Support internal and external quality audits and coordinate with consultants and clients on quality-related issues.</p><p>Ensure all works are completed in line with <strong>DEWA/TAQA requirements, project specifications, applicable UAE standards, and approved quality procedures</strong>.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>5+ years of relevant experience</strong>, including strong UAE experience in <strong>QA/QC for civil infrastructure, wet utilities, and substation projects</strong>.</p><p>Should have hands-on experience in <strong>drainage, sewerage, stormwater, potable water, substation foundations, cable trenches, equipment foundations, and associated civil works</strong>, with good knowledge of <strong>DEWA requirements and UAE standards</strong>.</p><p>Strong experience in <strong>IR/MIR, ITPs, method statements, inspections, testing, NCRs, quality documentation, consultant coordination, and project handover</strong>.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>MAIN OBJECTIVE OF ROLE</strong><br>To monitor the overall performance of GSE Shop and work towards the continuous improvement in terms of Quality, safety, and efficiency. <br><strong>KEY RESPONSIBILITIES</strong><br><ul><li>Maintains overall serviceability of all Equipment and Plant.</li><li>Ensures adherence to standard Safety Procedures by the team during maintenance tasks to mitigate the risk of personal injury to end-users and equipment damage.</li><li>Ensures manpower availability for approved tasks at hand.</li><li>Ensures the availability of sufficient stock levels of consumables and spare parts required for relevant GSE items.</li><li>Maintains all GSE maintenance records to ensure documentation every aspect of upkeep, including repairs, inspections, and service history.</li><li>Recommends procedural enhancements aimed at optimizing efficiency and productivity.</li><li>Ensures the timely execution of all scheduled tasks in accordance with the planned deadlines.</li><li>Conducts quality control (QC) checks and provides comprehensive support during relevant audits.</li><li>Forecasts the additional manpower requirement per shift.</li><li>Monitors the compliance with mandatory training requirements for all staff while offering continuous guidance and supervision to GSE shop personnel.</li></ul> <br><strong>QUALIFICATIONS</strong><br><ul><li>High School Diploma</li><li>Diploma in Mechanical Engineering</li><li>Fluent in English</li><li>Minimum of 5 years of experience in airline GSE operations is desirable.</li><li>Years with qualifications: 5 - 7 years</li><li>Valid UAE driving license.</li></ul> <br><strong>COMPETENCIES</strong><br><ul><li>Customer Focus</li><li>Teamwork</li><li>Effective Communication</li><li>Personal Accountability & Commitment to achieve</li><li>Resilience & Flexibility (Can do attitude)</li><li>Inspiring & Developing Others</li></ul> <br><strong>ISR REQUIREMENTS</strong><br>Reads and complies with the ISR policies of the Company and diligently reports any weakness or incidents to the respective Line Manager or the Information Security team. Completes all required ISR awareness sessions and follows associated guidelines in the day-to-day business operations.<br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
The overall scope of the job includes serving food and beverages to guests in the assigned outlet, providing a courteous, professional, efficient and flexible service consistent with the standards of the hotel and in line with Kempinski’s DNA values in order to encourage sales and maximize guest satisfaction.<br><br><ul><li>Reporting to Assistant Room Service Manager & Room Service Manager.</li><li>A courteous, professional and efficient service is provided at all times.</li><li>Be knowledgeable of all services and products offered by the hotel.</li><li>Have a thorough knowledge and understanding of all food and beverage items offered by the department assigned.</li><li>Have the knowledge and understanding to explain and perform upselling all items offered by the department assigned as well as offering alternatives.</li><li>Monitor operating supplies, equipment and reduce spoilage and wastage successfully.</li><li>Ensure that the place of work and surrounding area is kept clean and organized at all times.</li><li>Successfully perform opening and closing procedures established for the assigned outlet</li><li>Handle guest enquiries in a courteous and efficient manner and report guest complaints and feedback to supervisors.</li><li>Report guest complaints immediately to the supervisors and ensuring follow up is performed with the guest.</li><li>Being knowledgeable to operate the existing POS system based on the trained responsibility level as assigned in the department.</li><li>Undertake reasonable tasks and secondary duties as assigned by the Department Head.</li><li>Assist in carrying out scheduled inventories of products and operating equipment.</li><li>Perform any other assigned reasonable duties and responsibilities as assigned. </li><li>Ensure that food & beverage service is available for all hotel rooms & suites.</li><li>Correct Service procedures as per the outlines standard of performance</li><li>Ensure communication between Kitchen, Order taker and service team members.</li></ul> </div>
???? WE’RE HIRING – SWIMMING POOL PLUMBER ????<br>BACKSPACE POOLS & LANDSCAPING is looking for an experienced Swimming Pool Plumber to join our growing team in Dubai.<br>Requirements:• Minimum 2 years of experience in swimming pool plumbing• Experience in installation of pool piping, filtration systems, pumps, and equipment• Ability to read plumbing drawings and execute work independently• Knowledge of pressure testing and troubleshooting is an advantage• Valid UAE driving license is a plus<br>What We Offer:• Competitive salary (based on experience)• Visa and other benefits as per UAE Labour Law• Opportunity to work on premium swimming pool and landscaping projects<br>???? Location: Dubai, UAE<br>???? Interested candidates may send their CV to info@backspace.ae or Whats App 0503334815<br>Join BACKSPACE POOLS & LANDSCAPING and build exceptional outdoor spaces with us!
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>INSTRUMENTATION SPARE PARTS MAINTENANCE ENGINEER </strong>is required by our Client, an Oil and Gas Contractor, to be assigned on a contract basis, located in Abu Dhabi, UAE.</p><br><p><strong>STARTING DATE: ASAP<br>
DURATION: 2 years (renewable)</strong><br><strong>SCHEDULE:</strong><strong>48 hours/week – Monday to Friday</strong></p><br><p><strong>PRINCIPAL RESPONSIBILITIES</strong></p><br><ul><li>Determine with the Spare Part Team Leader the list of “Main equipment” for which spare parts dossiers will be established.</li><li>Definition of mechanical spare parts for maintenance and operation.</li><li>Spare parts definition & codification for SAP.</li><li>Verification of the commissioning/start up, capital spare parts.</li><li>Drawing up of optimized spare parts lists.</li><li>Recover the list of recommended spare parts provided by suppliers, vendors or manufacturers under Company SPL forms as required in the purchase orders.</li><li>Analyze the lists of spare parts provided for purchased equipment and/or packages.</li><li>Liaise with the relevant entities (vendor, supplier, manufacturer, EPC contractor, Company…) to supplement, clarify or consolidate the collected information.</li><li>Drawing up templates for material masters.</li></ul><p><strong>QUALIFICATIONS / EXPERIENCE</strong></p><br><ul><li>B.Sc Mechanical/Instrumentation/Electrical Engineering</li><li>5 / 10 years’ experience in Maintenance field for oil & gas production installations</li><li>Ability to work in a multinational team environment and in a client service-oriented relationship</li><li>Competence/experience in the relevant specialties.</li><li>Ability to assume responsibility and to interface and communicate efficiently with others</li><li>Effective oral and written communication skills and ability to represent The Company and MIEC team in a professional manner during any meeting with the client.</li><li>Computer literacy is required</li><li>English and French — full professional proficiency (spoken, read, written)</li></ul><p>The post Instrumentation Spare Parts Maintenance Engineer appeared first on Mentor IMC Group.</p><br>
<br> </div>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><ul><li>Conduct routine maintenance and repair of air conditioning units to ensure optimal performance and longevity.</li><li>Safely transport tools, equipment, and materials to job sites while adhering to traffic laws and safety regulations.</li><li>Diagnose issues in HVAC systems using specialized tools and adjust components as necessary to enhance efficiency.</li><li>Perform installations of new air conditioning systems, ensuring compliance with local codes and manufacturer specifications.</li><li>Maintain accurate records of service calls, repairs, and maintenance work to track performance and customer satisfaction.</li><li>Respond promptly to emergency service calls, providing quick and effective solutions to minimize downtime for clients.</li><li>Educate clients on proper use and maintenance of their HVAC systems to enhance user experience and system longevity.</li><li>Collaborate with team members to troubleshoot complex issues and share best practices in HVAC technology.</li><li>Keep the vehicle and equipment in good condition, ensuring all tools are accounted for and properly maintained.</li><li>Stay updated on industry trends, new technologies, and safety guidelines to maintain high-quality service.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years of hands-on experience in HVAC installation and repair, showcasing a proven track record.</li><li>Valid driver's license with a clean driving record, emphasizing responsibility and safety on the road.</li><li>Proficiency in reading technical manuals and schematics to facilitate effective repairs.</li><li>Strong problem-solving skills, enabling quick and efficient diagnosis of system issues.</li><li>Excellent communication skills, both verbal and written, to interact effectively with clients and team members.</li><li>Ability to work independently or as part of a team, demonstrating flexibility and collaboration.</li><li>Strong attention to detail, ensuring all work meets industry standards and client expectations.</li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><ul><li>Monitor and maintain the ship's machinery and equipment to ensure optimal performance and safety during voyages.</li><li>Assist in the loading and unloading of cargo, ensuring proper stowage and securing techniques to prevent damage.</li><li>Conduct regular inspections and maintenance of life-saving equipment, ensuring readiness for emergencies at all times.</li><li>Participate in safety drills and emergency response training, demonstrating preparedness for any situation that may arise at sea.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; maritime education or training is a significant plus.</li><li>STCW certification is mandatory, with additional safety training courses preferred for enhanced qualification.</li><li>At least 1-2 years of relevant experience in a maritime environment, showcasing hands-on knowledge.</li><li>Candidates with previous experience on similar vessel types will have an advantage in the selection process.</li></ul><p></p></section>