Equipment operator Jobs

<p>A established company is looking for a Pipe Fitter to install, assemble, maintain, and repair piping systems according to project specifications, drawings, and safety standards.</p> <p>Key Responsibilities<br /> Install, assemble, and repair pipes, fittings, valves, and related components.<br /> Read and understand piping drawings, layouts, and measurements.<br /> Cut, thread, bend, and prepare pipes as required.<br /> Align and connect pipes using appropriate tools and techniques.<br /> Inspect piping systems for leaks, damage, and proper installation.<br /> Coordinate with welders, plumbers, technicians, and other site workers.<br /> Follow project specifications and supervisor instructions.<br /> Maintain tools and equipment in good working condition.<br /> Follow UAE workplace health and safety procedures.<br /> Use appropriate PPE and maintain a clean and safe work area.<br /> Requirements<br /> Previous experience as a Pipe Fitter is preferred.<br /> Knowledge of pipe installation, fitting, and maintenance.<br /> Ability to read basic piping drawings and measurements.<br /> Familiarity with hand tools and pipe-fitting equipment.<br /> Relevant trade certificate or technical qualification is an advantage.<br /> Good physical fitness and ability to work on construction sites.<br /> Strong teamwork and communication skills.<br /> UAE experience is an advantage.<br /> Application</p> <p>&#x1f4f1; Interested candidates are invited to send their updated CV via WhatsApp: +971 542765817</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities</strong></p><ul><li><p>Conduct independent third-party inspections of Lifting equipment and lifting accessories</p></li><li><p>Perform frequent site visits across UAE to execute inspections, coordinate with client/site teams, and ensure inspection readiness and safety compliance.</p></li><li><p>Verify compliance with applicable UAE regulations/standards, manufacturer requirements, approved documents, and internal procedures.</p></li><li><p>Ensure compliance with ISO/IEC 17020, company Quality Management System, and Type A independence/impartiality requirements.</p></li><li><p>Face and support EIAC/LEEA technical audits/assessments (including witness audits).</p></li><li><p>Support development/improvement of technical inspection/test methods where applicable (procedures, checklists, acceptance criteria, work instructions) aligned with accreditation requirements.</p></li><li><p>Train and mentor other inspection engineers to standardize inspection practices, improve reporting quality, and develop competency.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking an Technical Manager with strong UAE experience in third-party inspections to perform independent inspections of lifting equipment &amp; accessories. The role includes review of equipment's, report/certificate issuance, participation in EIAC/LEEA audits, site visits, and training/mentoring other inspection engineers, in compliance with ISO/17020.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A leading global e-vapor brand is building a new manufacturing facility in the KEZAD Free Zone, Abu Dhabi, and is hiring 4-5 Manufacturing Engineers to join our factory setup and production team. KEZAD is the UAE's largest industrial free zone, adjacent to Khalifa Port, located between Abu Dhabi and Dubai. Fresh engineering graduates studying in China are highly welcome - basic Chinese is enough.</p><br><p>Industry: E-vapor Manufacturing / FMCG / Next-Generation Products. Working Languages: English or Hindi plus basic Chinese. Salary: Negotiable - we offer a competitive market-rate package based on experience and interview.</p><br><p>Key responsibilities:</p><p>Support production line setup, commissioning and process optimization. Develop and maintain process documents, SOPs and work instructions. Monitor production efficiency, yield and quality, and drive continuous improvement. Coordinate with Chinese technical teams, equipment suppliers and local operators. Provide on-floor technical support and operator training.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Bachelor's degree in Mechanical, Industrial, Electrical, Manufacturing or a related field. Fresh graduates welcome; manufacturing or production-line experience is a plus. Fluent in English or Hindi plus basic Chinese communication (able to work with Chinese teams). Hands-on attitude, willing to work on the production floor. Candidates currently in China, India or the UAE are all welcome.</p><p></p></section>

<p>Senior Facility Engineer – Duties and Responsibilities (Air Base)</p><ol><li><p>Facility Operations & Maintenance</p></li></ol><p>Manage the day-to-day operation and maintenance of all air base facilities.</p><p>Ensure all MEP (Mechanical, Electrical, and Plumbing) systems are functioning efficiently.</p><p>Supervise preventive, corrective, and predictive maintenance activities.</p><p>Monitor critical systems such as HVAC, generators, UPS, transformers, air compressors, water systems, and fuel systems.</p><p>Ensure uninterrupted operation of mission-critical facilities.</p><ol><li><p>Team Management</p></li></ol><p>Lead and supervise Facility Engineers, Supervisors, Technicians, and subcontractors.</p><p>Allocate manpower according to operational priorities.</p><p>Conduct daily toolbox talks and safety briefings.</p><p>Evaluate staff performance and identify training requirements.</p><ol><li><p>Planned Preventive Maintenance (PPM)</p></li></ol><p>Develop and implement annual maintenance plans.</p><p>Ensure all PPM activities are completed as per schedule.</p><p>Review maintenance reports and verify work completion.</p><p>Minimize equipment downtime through effective maintenance planning.</p><ol><li><p>Corrective Maintenance</p></li></ol><p>Respond immediately to emergency maintenance requests.</p><p>Investigate equipment failures and identify root causes.</p><p>Coordinate repairs to minimize operational disruptions.</p><p>Ensure all maintenance activities comply with OEM recommendations.</p><ol><li><p>Health, Safety & Environment (HSE)</p></li></ol><p>Ensure compliance with HSE regulations and air base safety standards.</p><p>Conduct regular safety inspections and risk assessments.</p><p>Monitor Permit-to-Work (PTW) systems.</p><p>Participate in emergency response drills.</p><p>Ensure proper use of PPE by all personnel.</p><ol><li><p>Asset Management</p></li></ol><p>Maintain an accurate asset register.</p><p>Monitor equipment lifecycle and recommend replacement of obsolete assets.</p><p>Track warranty periods and service contracts.</p><p>Ensure calibration of testing equipment.</p><ol><li><p>Contract & Vendor Management</p></li></ol><p>Monitor subcontractor performance.</p><p>Review maintenance contracts and service agreements.</p><p>Verify completed work before approving invoices.</p><p>Coordinate with suppliers for spare parts and equipment.</p><ol><li><p>Budget & Cost Control</p></li></ol><p>Prepare maintenance budgets.</p><p>Monitor operational expenses.</p><p>Recommend cost-saving initiatives without compromising reliability.</p><p>Control spare parts inventory.</p><ol><li><p>Client Coordination</p></li></ol><p>Serve as the primary technical point of contact with the client.</p><p>Attend coordination meetings.</p><p>Provide technical advice and engineering solutions.</p><p>Ensure client complaints are resolved promptly.</p><ol><li><p>Reporting</p></li></ol><p>Prepare daily, weekly, and monthly maintenance reports.</p><p>Monitor KPIs and SLAs.</p><p>Submit incident and root cause analysis reports.</p><p>Maintain maintenance records and documentation.</p><ol><li><p>Compliance</p></li></ol><p>Ensure compliance with:</p><p>UAE Civil Defence requirements</p><p>Local authority regulations</p><p>Environmental regulations</p><p>OEM standards</p><p>Military/Air Base security procedures</p><p>ISO 9001, ISO 14001, and ISO 45001 requirements (where applicable)</p><ol><li><p>Engineering Support</p></li></ol><p>Review engineering drawings and technical specifications.</p><p>Evaluate modification requests.</p><p>Support new facility construction and renovation projects.</p><p>Conduct site inspections and technical assessments.</p><ol><li><p>Emergency Response</p></li></ol><p>Act as the engineering focal point during emergencies.</p><p>Coordinate restoration of critical services.</p><p>Ensure backup power systems remain operational.</p><p>Participate in business continuity planning.</p><ol><li><p>Documentation</p></li></ol><p>Maintain:</p><p>As-built drawings</p><p>O&M manuals</p><p>Equipment history records</p><p>Asset registers</p><p>Calibration certificates</p><p>Test reports</p><p>Inspection records</p><p>Key Performance Indicators (KPIs)</p><p>PPM completion 100%</p><p>Equipment availability 99.5%</p><p>SLA compliance 100%</p><p>Emergency response within contractual limits</p><p>Zero Lost Time Incidents (LTI)</p><p>High client satisfaction</p><p>Timely closure of corrective actions</p><p>Effective budget control and reduced maintenance costs</p><p>Typical Systems Under the Senior Facility Engineer</p><p>HVAC and Chillers</p><p>Split & Package AC Units</p><p>Electrical Distribution (HV/LV)</p><p>Generators and UPS</p><p>Lighting Systems</p><p>Fire Alarm & Fire Fighting Systems-Support only</p><p>Plumbing & Drainage</p><p>Water Storage & Pumping Systems</p><p>Building Management System (BMS)</p><p>Compressed Air Systems</p><p>Fuel Storage & Distribution</p><p>Hangars and Aircraft Support Facilities</p><p>Roads, Pavements, and External Infrastructure</p><p><strong>Desired Candidate Profile</strong></p><p>Nationality-Unrestricted Nationality</p><p>Expereience-10 years up </p><p>Age: 40 and above</p><p>Bachelor's degree in Engineering is a must</p>

<p>Company Description: For 170 years, Veolia has been a global leader in providing water, energy, and waste management solutions. Serving public authorities and industries across 58 countries, our comprehensive services are essential to human development and sustainable growth. As we progress alongside economic growth and human development, we continuously adapt and innovate, designing solutions that positively impact the environment and conserve resources. Veolia focuses on local solutions to purify and preserve vital resources, mitigate resource depletion, decarbonize lifestyles and production methods, and adapt to the impacts of climate change. Our mission is to build a better 21st century, and we proudly identify as #resourcers. Key figures of Veolia Near and Middle East: - Over 3,900 employees in the Middle East (in addition to the nearly 6,000 employees for Enova, which reports directly to Veolia Africa Middle-East for Facility Management and Energy Efficiency contracts in the region) - A robust local network across the region, including the UAE, Oman, Qatar, Bahrain, Kuwait, Lebanon, Turkey, Jordan, and Saudi Arabia - 40 years of sustainable partnerships In the Middle East, Veolia collaborates with industries, governments, communities, and commercial businesses to deliver innovative and sustainable solutions needed today, while maintaining a vision for tomorrow. Through public-private partnerships and innovative contractual schemes, Veolia is dedicated to achieving measurable results with pragmatic, sustainable environmental solutions. For more information, please visit our Website. Job Description: Main Accountabilities: We are seeking a skilled Welder to join our Waste Management Department. You will be responsible for welding and fabricating components for waste management equipment. Detailed Job Description: - Perform welding operations on various materials and equipment - Inspect and prepare materials for welding - Maintain welding equipment and tools - Ensure work meets quality and safety standards</p><p>Required Qualifications : - Valid welding certification - Proven welding experience - Knowledge of health and safety protocols - Attention to detail and precision Preferred Qualifications : - Experience in waste management or industrial equipment - Multiple welding certifications (MIG & Stick)</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Crane Operator RM <p>Crane Operator II (Finished) </p><br> <p>JOB DETAIL </p><br> <p>General Summary </p><br> <p>Handling of billets including and picking up of billets from billet transfer equipment, stacking in </p><br> <p>locations, cast , grade and size wise ensuring no mix up between casts and feeding the billets to </p><br> <p>rolling mill furnace charging grids as per Rolling program and loading of trailers for shifting outside as </p><br> <p>well as internal shifting. Ensuring no interruption of mill operations due to billet feeding. </p><br> <p>Essential Duties and Responsibilities (Key Accountabilities) </p><br> <p> Efficient &amp; Safe handling of billets. </p><br> <p> Liaise with Mill production team for feeding to rolling mills and removing off size/shape/grade </p><br> <p>billets when instructed. </p><br> <p> Ensure that one crane is operation when production is in process, never leave the crane when </p><br> <p>other cranes are not in operation and the production is going on. </p><br> <p> Ensure pre-operation checks of major crane controls </p><br> <p> Operating cranes as per safe crane operational practices. </p><br> <p> Shift billets from one location to another when needed. </p><br> <p> Ensure billets are picked up for charging from location mentioned in rolling program and </p><br> <p>instructed by shift controller </p><br> <p> Ensure each grade and size billets are stacked separately. </p><br> <p> Loading of trailers as and when instructed for either internal shifting or outdoor shifting. </p><br> <p> Ensure adequate coordination amongst other crane operators to prevent safety incidence and </p><br> <p>render uninterrupted service to production departments and loading of dispatch truck. </p><br> <p> Stack billets in secure manner. </p><br> <p> Report on crane performance to the shift controller in every shift. </p><br> <p> Remove ejected billets from furnace charging grid area and stack in secure manner </p><br> <p> Assist engineering crew when assistance is sought by them while attending to maintenance </p><br> <p>issues. </p><br> <p> Maintain the crane operating cabin clean </p><br> <p> Shifting of material from one location to another to accommodate production </p><br> <p>Additional Duties and Responsibilities </p><br> <p> Assist shift controller in special requirement of handling material . </p><br> <p> Assist shift controller exercising control and monitoring of inventory management, investigation </p><br> <p>of safety &amp; environment incidents. </p><br> <p>Assist shift controllers in accomplishing other material handling requirements </p><br> <p>Knowledge, Skills and/or Abilities (attributes) required </p><br> <p>To perform this job successfully, an individual must be able to perform each duty satisfactorily. The </p><br> <p>requirements listed below are representative of the knowledge, skills, and abilities required. </p><br> <p> Good physical capabilities and health., </p><br> <p> Ability to judge distance, height, vision, clearance, hearing, color distinction, reasonable </p><br> <p>quick reflexes and asses the load weight </p><br> <p> Basic knowledge of rigging and safe crane operation. </p><br> <p> Conversant with hand signals for crane operation and hazards involved in cranes operation </p><br> <p> Ability to read and understand verbal and written communications and interpret Rolling </p><br> <p>programs. </p><br> <p> Technical knowledge of crane operation and its controls and carry out pre operation checks </p><br> <p>Minimum Education Qualifications (Must Haves) Any preferred professional </p><br> <p>training (Nice to have) </p><br> <p> 10 years of fulltime school education Technical (Mechanical or electrical ) </p><br> <p>education </p><br> <p> Possess UAE appropriate operating </p><br> <p>license. </p><br> <p> Training in crane operation</p><br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A leading global e-vapor brand is building a new manufacturing facility in the KEZAD Free Zone, Abu Dhabi, and is hiring 4-5 Manufacturing Engineers to join our factory setup and production team. KEZAD is the UAE's largest industrial free zone, adjacent to Khalifa Port, located between Abu Dhabi and Dubai. Fresh engineering graduates studying in China are highly welcome - basic Chinese is enough.</p><p>Industry: E-vapor Manufacturing / FMCG / Next-Generation Products. Working Languages: English or Hindi plus basic Chinese. Salary: Negotiable - we offer a competitive market-rate package based on experience and interview.</p><p>Key responsibilities:</p><p>Support production line setup, commissioning and process optimization. Develop and maintain process documents, SOPs and work instructions. Monitor production efficiency, yield and quality, and drive continuous improvement. Coordinate with Chinese technical teams, equipment suppliers and local operators. Provide on-floor technical support and operator training.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Bachelor's degree in Mechanical, Industrial, Electrical, Manufacturing or a related field. Fresh graduates welcome; manufacturing or production-line experience is a plus. Fluent in English or Hindi plus basic Chinese communication (able to work with Chinese teams). Hands-on attitude, willing to work on the production floor. Candidates currently in China, India or the UAE are all welcome.</p><p></p></section>

<p>JOB PURPOSE: Reporting into the Country Manager, the Service Manager will lead a team of Service Engineers to ensure operational, technical and financial performance targets are met for their assigned depot. This will include service improvement and any associated financial budgetary oversight while constantly seeking improvements to drive operational excellence. In this highly autonomous role, he will also develop and implement plans to ensure that projects and repairs are delivered on time and within the specified budget. The Service Manager will also play an active part in strengthening our existing customer relationships by providing expert advice and servicing their customers to an extremely high standard. He will also support the wider business teams by identifying opportunities for additional, repeat or new business. This is a hands-on role, working on a variety of powered access equipment working on site and off site. It is based in the depot but will also require travel to sites when required. KEY RESPONSIBILITIES: Maintenance Operations • Manage the operational technical service functions across the assigned geographical region to ensure project plans and timescales are met • Drive, implement the operational excellence (Tech-X) programme to ensure continual improvements throughout the Engineering department • Monitor operational and financial data and review against agreed forecasts and targets • Implement technical strategy to deliver the high-quality fleet reliability and service to our customers • Produce monthly service schedule and organise workload of engineers to ensure all work is completed in accordance within agreed timescales • Identify, plan, procure and logistically manage the fleet, tools and materials to service demand • Maintain fleet performance and appearance as per manufacturer and company guidelines • Produce month-end reports and analysis such as machine reliability, breakdown and performance and inspection for senior management review. Provide recommendations for improvements where necessary • Ensure pre-delivery inspections (PDI) of each machine is carried out at depot or on site as required, and is in conformance with manufacturers specification and company policy Lead the required activity to customer breakdowns to ensure prompt and considered response to the despatch of mobile service engineers • Establish safety and security procedures. Ensures that all health and safety legislation is adhered to Team Management • Support the Country Manager with recruitment and selection of engineering staff • Day-to-day service management of the technical service teams • Ensure performance of all staff achieves agreed objectives • Identify training and development needs of service engineer staff and provide training and development in line with achievement of individual, depot and corporate objectives • Responsible for understanding and practicing appropriate safety procedures as follows: • Act as safely at work as you would elsewhere, if not more so • Use the tools available to you to maintain a safe environment • Participate in the safety training programme to educate yourself on hazards, safety practices, and rules • Communicate about unsafe practices and conditions • Always follow safety rules and regulations</p><p>The chosen candidate will meet ALL the essential criteria below: ESSENTIAL • Extensive technical knowledge within the powered access, heavy plant, construction or engineering industry sector • An in-depth understanding of global standard operating procedures and governance • Must have a successful track record in hands on experience and be able to demonstrate highly effective engineering skills with hydraulics, pneumatics, electrical, mechanical and diesel engines • Ability to analyse data, diagnose root cause engineering issues and take action to deliver sustained improvement • Understanding of business planning activities including cost management and cost recovery, resource management and organisational design • Costs control and financial knowledge • Must be fully conversant with Health & Safety legislation • Must have previous experience of managing engineering teams and motivating employees to perform as a team • A clean driving licence DESIRABLE • Educational qualification in any industry-related field • IPAF Operator Licence and /or IPAF Demonstrator Licence • Experience working abroad or managing multicultural teams Key Demographic Requirements - applicants must be: Based in UAE</p>

<p>A proactive and detail-oriented asset and inventory professional responsible for managing, tracking, and maintaining all assets and consumable inventory across the DEC Housekeeping division. This role ensures effective asset control, adherence to audit standards, and supports operational efficiency through timely reporting and strategic stock planning. The Asset Controller will coordinate with supervisors, storekeepers, and the procurement team to ensure equipment, tools, and consumables are accounted for, distributed correctly, and maintained in good condition. This role also involves ensuring compliance with DEC policies and providing cost control and usage tracking insights.</p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Inventory and Asset Control</p><p><br></p><p>Maintain an up-to-date log of all assets (machines, equipment, tools, consumables) used in the DEC Housekeeping division. Ensure accurate documentation of issuance, transfers, and returns. Conduct physical audits monthly and report discrepancies</p></li></ol><p><br></p><ol start="2"><li><p>Data and System Management</p><p><br></p><p>Ensure all asset and inventory data are recorded in the INFO EAM system. Generate and analyze reports related to asset utilization, loss, repair status, and replacements. Maintain barcoding and tagging systems for assets. Infrastructure and Event Readiness Work closely with Housekeeping Supervisors to forecast asset and material needs for events and infrastructure tasks. Provide required items in a timely manner with complete checklists.</p><p><br></p></li><li><p>Health and Safety Compliance</p><p><br></p><p>Ensure all equipment and tools are stored in compliance with DWTC standards. Maintain MSDS sheets for consumables. Conduct risk checks before deployment of machinery or items.</p><p><br></p></li><li><p>Financial Accountability</p></li></ol><p><br></p><p>Support the budgeting process by providing accurate stock consumption records, identifying high-usage items, and contributing to asset life-cycle planning. Report anomalies in monthly asset utilization.</p><p><br><br></p>

An Operations Process Engineeroptimizes manufacturing, production, or industrial workflows to maximize efficiency, quality, and safety while reducing costs. Key duties include analyzing process trends, troubleshooting equipment issues, developing standard operating procedures (SOPs), and implementing new, cost-effective technologies. They work to improve production capacity and ensure compliance with safety/regulatory standards.<br><br>Key Responsibilities And Duties<br><br> Process Optimization: Analyze existing manufacturing processes to improve efficiency, productivity, and yield.<br><br> Design Implementation: Design, test, and install new equipment or process upgrades to enhance production capabilities.<br><br> Troubleshooting: Identify, diagnose, and resolve daily operational and equipment issues to minimize downtime.<br><br> Documentation Compliance: Develop and maintain technical documentation, including SOPs, Process Flow Diagrams (PFD), and Failure Mode and Effects Analysis (FMEA).<br><br> Safety Quality: Ensure processes comply with safety, environmental, and quality standards, such as ISO.<br><br> Data Analysis: Monitor process KPIs, such as cycle times and yield rates, to inform data-driven decisions.<br><br> Training Collaboration: Train operators on new processes and collaborate with maintenance, quality, and production teams.<br><br>This job is provided by Shine.com

An Operations Process Engineeroptimizes manufacturing, production, or industrial workflows to maximize efficiency, quality, and safety while reducing costs. Key duties include analyzing process trends, troubleshooting equipment issues, developing standard operating procedures (SOPs), and implementing new, cost-effective technologies. They work to improve production capacity and ensure compliance with safety/regulatory standards.<br><br>Key Responsibilities And Duties<br><br> Process Optimization: Analyze existing manufacturing processes to improve efficiency, productivity, and yield.<br><br> Design Implementation: Design, test, and install new equipment or process upgrades to enhance production capabilities.<br><br> Troubleshooting: Identify, diagnose, and resolve daily operational and equipment issues to minimize downtime.<br><br> Documentation Compliance: Develop and maintain technical documentation, including SOPs, Process Flow Diagrams (PFD), and Failure Mode and Effects Analysis (FMEA).<br><br> Safety Quality: Ensure processes comply with safety, environmental, and quality standards, such as ISO.<br><br> Data Analysis: Monitor process KPIs, such as cycle times and yield rates, to inform data-driven decisions.<br><br> Training Collaboration: Train operators on new processes and collaborate with maintenance, quality, and production teams.<br><br>This job is provided by Shine.com

An Operations Process Engineeroptimizes manufacturing, production, or industrial workflows to maximize efficiency, quality, and safety while reducing costs. Key duties include analyzing process trends, troubleshooting equipment issues, developing standard operating procedures (SOPs), and implementing new, cost-effective technologies. They work to improve production capacity and ensure compliance with safety/regulatory standards.<br><br>Key Responsibilities And Duties<br><br> Process Optimization: Analyze existing manufacturing processes to improve efficiency, productivity, and yield.<br><br> Design Implementation: Design, test, and install new equipment or process upgrades to enhance production capabilities.<br><br> Troubleshooting: Identify, diagnose, and resolve daily operational and equipment issues to minimize downtime.<br><br> Documentation Compliance: Develop and maintain technical documentation, including SOPs, Process Flow Diagrams (PFD), and Failure Mode and Effects Analysis (FMEA).<br><br> Safety Quality: Ensure processes comply with safety, environmental, and quality standards, such as ISO.<br><br> Data Analysis: Monitor process KPIs, such as cycle times and yield rates, to inform data-driven decisions.<br><br> Training Collaboration: Train operators on new processes and collaborate with maintenance, quality, and production teams.<br><br>This job is provided by Shine.com

Qualifications Experience in Installation and repair of Shot blasting Machines Ability to perform basic mechanical troubleshooting, routine maintenance, and inspections of shot blasting machine. Strong awareness of safety procedures, use of personal protective equipment, and adherence to workplace health and safety regulations. Ability to read and follow work instructions, job cards, and production schedules with attention to detail. Physical ability to work in an industrial environment, including standing for extended periods Prior experience in an industrial or fabrication setting; shot blasting or metal finishing experience in the Gulf region is an advantage. Basic communication skills in English, Hindi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform general maintenance and repair activities for manufacturing plant equipment.</p></li><li><p>Operate workshop machinery including <strong>lathe, milling, drilling, and grinding machines</strong> safely and efficiently.</p></li><li><p>Repair damaged mechanical components such as <strong>shafts, bushes, sleeves, and other fabricated parts</strong> during equipment breakdowns.</p></li><li><p>Carry out machining, fitting, and fabrication work as per maintenance requirements.</p></li><li><p>Support preventive and corrective maintenance activities to reduce equipment downtime.</p></li><li><p>Read and interpret mechanical drawings and technical specifications where required.</p></li><li><p>Inspect repaired components to ensure they meet quality and dimensional standards.</p></li><li><p>Maintain workshop tools, machinery, and equipment in good working condition.</p></li><li><p>Follow company safety procedures, housekeeping standards, and maintenance best practices.</p></li><li><p>Coordinate with the Maintenance team to ensure timely completion of repair work.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>iploma or ITI/Technical Certificate in Mechanical Engineering, Machinist, Fitter, or a related trade.</p></li><li><p><strong>3–5 years of experience</strong> as a Workshop Technician or Machinist in a manufacturing or industrial environment (preferably FMCG or beverage industry).</p></li><li><p>Hands-on experience operating <strong>lathe, milling, drilling, and grinding machines</strong>.</p></li><li><p>Strong knowledge of machining, fabrication, fitting, and mechanical repair techniques.</p></li><li><p>Experience repairing mechanical components such as shafts, rollers, bushes, couplings, and similar parts.</p></li><li><p>Ability to troubleshoot mechanical issues and provide effective repair solutions during equipment breakdowns.</p></li><li><p>Good understanding of workshop safety practices and preventive maintenance.</p></li><li><p>Team player with good problem-solving skills and the ability to work under pressure during plant breakdowns.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p>We are seeking a motivated and target-oriented <strong>Outdoor Sales Executive</strong> with a <strong>valid UAE driving license</strong> to promote and sell <strong>welding equipment, cutting tools, and welding accessories.</strong> The ideal candidate will be responsible for generating new business, managing customer relationships, and achieving sales targets through regular client visits and market development activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li><p>Identify and develop new business opportunities within the construction, fabrication, manufacturing, and industrial sectors.</p></li><li><p>Promote and sell welding consumables, cutting equipment, welding machines, consumables and safety accessories.</p></li><li><p>Conduct regular customer visits to generate sales and strengthen client relationships.</p></li><li><p>Prepare and submit quotations, negotiate pricing, and close sales orders.</p></li><li><p>Follow up on inquiries, quotations, and outstanding payments.</p></li><li><p>Achieve monthly and annual sales targets set by the management.</p></li><li><p>Monitor market trends, competitor activities, and customer requirements.</p></li><li><p>Coordinate with the operations and logistics teams to ensure timely delivery of orders.</p></li><li><p>Maintain accurate records of customer interactions, sales activities, and market feedback.</p></li><li><p>Provide periodic sales reports and forecasts to management.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum 1–3 years of <strong>outdoor sales experience in welding products, cutting tools, industrial equipment, consumables or related products.</strong></p></li><li><p>Strong knowledge of welding consumables, cutting equipment, and safety accessories.</p></li><li><p><strong>Valid UAE driving license (mandatory).</strong></p></li><li><p>Excellent communication, negotiation, and relationship-building skills.</p></li><li><p>Ability to work independently and achieve sales targets.</p></li><li><p>Proficiency in MS Office applications.</p></li><li><p>Strong customer service and problem-solving abilities.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement. KEY ACCOUNTABILITIES: Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant &amp; equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc. Assists other departments in the repair and troubleshooting of equipment Inputs data into maintenance management systems for works and manning records. Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor . Performs all the PM’S, running inspections &amp; checklists on daily basis issued as per maintenance planning requirements. Perform other related duties as communicated by supervisor/technician.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>QUALIFICATIONS &amp; SKILLS: Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation &amp; troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Quality Inspector</strong><br></p><p>The Quality Inspector shall be responsible for monitoring and verifying that all fabrication, welding, dimensional control, surface preparation, and painting activities are carried out in accordance with the approved drawings, project specifications, applicable codes and standards, and approved quality procedures.<br></p><p>The Quality Inspector's responsibilities shall include, but not be limited to:<br></p><ul><li><p>Reviewing approved shop drawings, specifications, inspection procedures, and relevant standards before inspection activities.<br></p></li><li><p>Inspecting incoming materials and verifying material identification, traceability, and compliance with approved material requirements.<br></p></li><li><p>Monitoring fabrication operations to ensure compliance with approved production and quality requirements.<br></p></li><li><p>Performing fit-up inspections, welding inspections, dimensional checks, and visual inspections of fabricated bridge components.<br></p></li><li><p>Conducting dimensional verification using measuring equipment such as tapes, levels, alignment gauges, dumpy levels, and total stations.<br></p></li><li><p>Inspecting surface preparation, abrasive blasting, and painting activities to ensure compliance with project specifications and approved painting procedures.<br></p></li><li><p>Witnessing and recording inspection and test results, including dimensions, temperatures, coating thicknesses, and other quality-related data.<br></p></li><li><p>Identifying and reporting non-conformities and assisting in the implementation of corrective actions.<br></p></li><li><p>Coordinating inspection activities with production personnel, welding supervisors, and QA/QC engineers.<br></p></li><li><p>Ensuring that only calibrated inspection and measuring equipment are used during inspection and testing activities.<br></p></li><li><p>Preparing and maintaining inspection reports, quality records, checklists, and other QA/QC documentation required by the project.<br></p></li><li><p>Verifying compliance with AWS D1.5, project specifications, approved procedures, and Inspection and Test Plans (ITPs).<br></p></li></ul><p>The Quality Inspector shall report directly to the QA/QC Engineer and support the implementation of the project quality management system throughout the execution of the works.<br></p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Requirements</strong><br></p><ul><li><p>Minimum of 2 years QA/QC experience in structural steel fabrication<br></p></li><li><p>Strong knowledge of welding standards, WPS/PQR, and NDT processes<br></p></li><li><p>Experience with hot-dip galvanizing and coating inspection<br></p></li><li><p>Ability to interpret drawings and technical specifications<br></p></li><li><p>Strong documentation and reporting skills<br></p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<ul><li>Conduct routine inspections and testing of fire alarm systems, sprinkler systems, and fire suppression equipment to ensure operational readiness and compliance with safety codes.</li><li>Perform preventative maintenance and minor repairs on fire protection systems, documenting all work performed and identifying potential issues.</li><li>Respond promptly to fire alarm activations and system malfunctions, diagnosing problems and implementing immediate corrective actions.</li><li>Install and commission new fire protection equipment and systems according to design specifications and manufacturer guidelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a high school diploma or equivalent; vocational training in fire protection or a related technical field is highly advantageous.</li><li>Hold relevant certifications such as NICET (Levels II or III), CFPS, or manufacturer-specific training for fire alarm and suppression systems.</li><li>Demonstrate a minimum of 3-5 years of hands-on experience in the inspection, testing, and maintenance of diverse fire protection systems.</li><li>Proficiency in reading and interpreting blueprints, schematics, and technical manuals related to fire protection systems.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Expand the company's product portfolio. Identifying and introducing new and advanced products into the market. </p></li><li><p>Analyze market trends, competitor activities, and customer feedback to identify opportunities for product enhancement and new market penetration.</p></li><li><p>Serve as the primary technical expert for a portfolio of medical equipment and consumables, providing in-depth product knowledge to sales teams and customers.</p></li><li><p>Develop and deliver compelling product demonstrations and showcasing the clinical benefits and operational advantages of our products and solutions.</p></li><li><p>Collaborate with Management and marketing team to translate customer needs and technical insights into product development roadmaps and marketing collateral.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Biomedical Engineering, Clinical Science, Nursing, or a related healthcare field.</p></li><li><p>Very Good communication skills. Should be fluent in English.</p></li><li><p>Minimum of 5+ years of experience in the medical device or healthcare consumables industry, with a focus on product management or technical support.</p></li><li><p>Proven understanding of medical equipment operation, clinical applications, and healthcare workflows.</p></li><li><p>Proficiency in technical documentation, product training delivery, and competitive analysis.</p></li></ul><p></p></section>