Factory Jobs - Umm Al Quwain UAE
171 Jobs Found
Save and set alert for similar positionsManage alerts
<ul><li><p>Review, draft and administer contracts, subcontracts, work orders, LOAs, amendments, variations and other contractual documents.</p></li><li><p>Review tender and contract documents and identify contractual, commercial and legal risks.</p></li><li><p>Monitor contractual obligations, deliverables, notices, approvals, guarantees, insurance and other compliance requirements.</p></li><li><p>Prepare and issue contractual correspondence, notices, instructions, claims and responses in coordination with the relevant project teams.</p></li><li><p>Administer variations, extension of time claims, disruption claims, delay notices, liquidated damages and other contractual entitlements.</p></li><li><p>Review subcontractor/vendor claims and supporting documentation and provide contractual recommendations.</p></li><li><p>Maintain contract registers, claims registers, variation logs, BG/insurance trackers and other contractual MIS.</p></li><li><p>Coordinate with Projects, Procurement, Finance, Legal, Planning and other stakeholders on contractual and commercial matters.</p></li><li><p>Support dispute avoidance and resolution, including preparation of contractual records and documentation for potential legal proceedings.</p></li><li><p>Ensure proper documentation and records are maintained to protect the Company’s contractual position.</p></li><li><p>Assist in negotiations with subcontractors, consultants and suppliers to achieve commercially and contractually favourable outcomes.</p></li><li><p>Ensure compliance with applicable contractual requirements, Company procedures and relevant UAE laws and regulations.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of construction contracts and contract administration.</p></li><li><p>Good understanding of FIDIC and UAE construction contracting practices.</p></li><li><p>Contract drafting, review and negotiation skills.</p></li><li><p>Claims, variation and EOT management.</p></li><li><p>Strong analytical, commercial and communication skills.</p></li><li><p>Ability to interpret contractual provisions and assess contractual risk.</p></li><li><p>Good documentation, reporting and stakeholder-management skills.</p></li><li><p>Proficiency in MS Office and contract/MIS management systems.<br>Bachelor’s degree in Civil Engineering, Quantity Surveying, Construction Management (NICMAR) or a related discipline.</p></li><li><p>3–7 years of relevant experience in contracts administration within the construction/real-estate sector.</p></li><li><p>UAE/GCC construction experience preferred.</p></li><li><p>Experience in subcontract and main-contract administration, claims and commercial matters preferred<br><br></p></li></ul>
<p><strong>Company Description</strong> AL NAJAH LPG Gas Pipeline Installations is a UAE-based provider of safe, reliable, and cost-effective LPG gas pipeline solutions for residential, commercial, and industrial clients. The company delivers end-to-end services, including design, engineering, installation, tank commissioning, testing, certifications, and ongoing maintenance and emergency support. With strict compliance to UAE safety standards and a team of qualified engineers and technicians, AL NAJAH focuses on timely project execution and high-quality workmanship. Its mission is to ensure safety, reliability, and efficiency while offering customized solutions that meet diverse client needs and budgets. AL NAJAH is committed to being a trusted, customer-centric partner known for excellence, innovation, and long-term value across the UAE.</p><p><strong>Role Description</strong> This is a full-time, on-site Sales Executive role based in Umm Al Quwain. The Sales Executive will identify and pursue new business opportunities for LPG pipeline installations, maintenance, and related services across residential, commercial, and industrial sectors. Typical responsibilities include generating leads, conducting site visits, preparing proposals and quotations, negotiating contracts, and closing deals in line with company targets. The role also involves maintaining strong relationships with existing clients, providing accurate product and service information, and coordinating with engineering and operations teams to ensure smooth project handover. The Sales Executive will monitor market trends, competitor activities, and customer feedback to support continuous improvement and growth.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Strong sales and business development skills, including lead generation, pipeline management, and contract negotiation.</li><li>Solid communication and interpersonal skills, with the ability to build trust and maintain long-term client relationships.</li><li>Basic technical understanding of LPG systems, pipeline installations, or related mechanical/electrical services (training can be provided).</li><li>Organizational and time-management skills to handle multiple prospects, site visits, and follow-ups efficiently.</li><li>Ability to work on-site in Umm Al Quwain and travel within the UAE as needed for client meetings and project visits.</li><li>Previous experience in B2B or project-based sales, ideally in construction, MEP, gas systems, or industrial services, is an advantage.</li><li>Proficiency in MS Office and basic CRM tools for reporting, documentation, and sales tracking.</li><li>Relevant diploma or bachelor’s degree in business, marketing, engineering, or a related field is preferred.</li></ul>
<p><strong>Job Title: Site Engineer</strong><br><strong>Location: Umm Al Quwain, UAE</strong><br><strong>Availability: Immediate Joiners Preferred</strong></p><br><p><strong>MUST HAVE UAE EXPERIENCE WORKING ON HIGH RISE BUILDINGS(MANDATORY)</strong></p><br><p><strong>Job Description:</strong><br>We are looking for a skilled and proactive Site Engineer to join our team for an ongoing high-rise construction project. The ideal candidate will be responsible for overseeing daily site activities, ensuring construction work aligns with drawings and specifications, and supporting the Project Manager in the smooth execution of the project. This is an immediate requirement, and candidates who can join without delay will be given priority.</p><p><br></p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Supervise and monitor daily construction activities on site to ensure work progresses as per schedule</p></li><li><p>Interpret and implement construction drawings, blueprints, and technical specifications accurately</p></li><li><p>Coordinate with contractors, subcontractors, and labor teams to ensure smooth workflow</p></li><li><p>Ensure construction work complies with quality standards, safety regulations, and project specifications</p></li><li><p>Conduct regular site inspections and report any deviations, defects, or issues to the Project Manager</p></li><li><p>Monitor and verify material quantities, deliveries, and usage on site</p></li><li><p>Maintain accurate site records, including daily progress reports, logbooks, and site diaries</p></li><li><p>Assist in preparing and updating project schedules and work programs</p></li><li><p>Coordinate with surveyors for site layout, leveling, and setting out works</p></li><li><p>Liaise with consultants, architects, and other engineers to resolve technical issues on site</p></li><li><p>Ensure adherence to health and safety protocols at all times</p></li><li><p>Support the Project Manager in workforce planning, productivity monitoring, and resource allocation</p></li><li><p>Identify potential risks or delays and escalate issues promptly for timely resolution</p></li><li><p>Participate in site meetings and provide technical input as required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements:</strong></p><ul><li><p>Bachelor's degree/Diploma in Civil Engineering or related field</p></li><li><p>Proven experience as a Site Engineer, preferably on high-rise or large-scale construction projects</p></li><li><p>Strong understanding of construction methods, materials, and project management principles</p></li><li><p>Ability to read and interpret technical drawings and specifications</p></li><li><p>Good communication and coordination skills</p></li><li><p>Ability to work under pressure and manage multiple tasks on site</p></li><li><p>Immediate availability to join is highly preferred</p></li><li><p>Must be based in or willing to relocate to Umm Al Quwain</p></li><li><p>Must be in UAE</p><p><br></p></li></ul>
<p>Position Title: Maintenance Electrician
Employment Type: Full Time
Salary: up to 4,500 AED inclusive depending on experience and qualifications
Job Location: Umm Al Quwain, UAE
About the Client:
An established UAE-based industrial manufacturing company specializing in the production of steel drums and industrial packaging solutions.
Job Description:
? Perform preventive, corrective, and breakdown maintenance on industrial production machinery, independently diagnosing and rectifying electrical faults to minimize downtime.
? Troubleshoot, program, and maintain Schneider PLC and HMI systems, including automation controls, machine sequences, sensors, and electrical control circuits.
? Configure, program, and troubleshoot AC motor drives and VFDs (Schneider, Siemens, Danfoss, L&T), ensuring reliable operation of motors and automated machinery.
? Assemble, install, and maintain electrical control panels, switchgear, and power/control wiring; perform electrical maintenance on air compressors, transformers, and diesel generators.</p><p>Qualifications:
? Open to male, aged 25 to 38.
? Must have ITI, Technical Diploma, or Diploma in Electrical Engineering, Industrial Electronics, or a related discipline.
? Minimum 3 years of hands-on electrical maintenance experience in industrial manufacturing, particularly in steel drums, metal packaging, fabrication, or automated production facilities.
? Hands-on experience in Schneider PLC programming, HMI troubleshooting, AC drives and VFD configuration, machinery breakdown troubleshooting, electrical panel assembly, electrical drawing interpretation, and maintenance of compressors, transformers and generators.</p>
<ul><li>Oversee daily garage operations, ensuring timely and efficient vehicle maintenance and repairs while maintaining safety standards.</li><li>Coordinate and schedule work assignments for technicians, optimizing workflow to minimize downtime and maximize productivity.</li><li>Implement and monitor adherence to quality control procedures, ensuring all work meets industry standards and customer satisfaction.</li><li>Manage inventory of tools, parts, and supplies, conducting regular audits to prevent shortages and reduce excess stock.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; technical degree or certifications in automotive technology is preferred.</li><li>Minimum of 5 years of hands-on automotive repair experience, with at least 2 years in a supervisory role.</li><li>ASE certifications in relevant areas (e.g., brakes, electrical systems) to validate technical expertise.</li><li>Experience in managing a team, with a proven track record of enhancing team performance and morale.</li></ul>
<ul><li>Develop and maintain strong relationships with clients to understand their spare parts needs and provide tailored solutions.</li><li>Conduct market research to identify potential customers and emerging trends in the spare parts industry to drive sales growth.</li><li>Prepare and deliver compelling sales presentations, showcasing product features and benefits to effectively influence customer decisions.</li><li>Manage the entire sales cycle from prospecting to closing, ensuring timely follow-up and customer satisfaction.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Business, Engineering, or a related field is preferred for a foundational understanding of the industry.</li><li>A minimum of 3-5 years of experience in spare parts sales or a related field, demonstrating a successful sales track record.</li><li>Proven experience in the automotive, aerospace, or machinery sectors is highly desirable for industry-specific knowledge.</li><li>Strong technical acumen with the ability to understand and explain complex spare parts specifications and functionalities.</li></ul>
<ul><li>Conduct thorough audits of financial statements to ensure compliance with accounting standards and regulations, identifying discrepancies and areas for improvement.</li><li>Develop and implement audit plans tailored to specific organizational needs, ensuring a systematic approach to evaluating operational efficiency and risk management.</li><li>Collaborate with cross-functional teams to gather and analyze data, providing insights that support strategic decision-making and enhance overall business performance.</li><li>Prepare detailed audit reports that clearly articulate findings, recommendations, and corrective actions, ensuring clarity and accessibility for stakeholders.</li><li>Assist in the development and refinement of internal controls, working proactively to mitigate risks and enhance the organization's financial integrity.</li><li>Stay updated on industry trends, regulations, and best practices in auditing, integrating new knowledge into audit processes and methodologies.</li><li>Maintain meticulous documentation of audit processes and findings, ensuring compliance with regulatory requirements and organizational policies.</li><li>Build and maintain strong relationships with clients and stakeholders, ensuring open communication and trust throughout the audit process.</li></ul><br/><p><strong>Desired Candidate Profile</strong></p><p><br></p><ul><li><p>A minimum of 5-6 years of relevant experience in auditing or financial analysis within a corporate or public accounting environment.</p></li><li><p>Strong analytical skills with a keen attention to detail, enabling the identification of trends and anomalies in financial data.</p></li><li><p>Excellent communication skills, both verbal and written, to convey complex audit findings clearly and persuasively.</p></li><li><p>A proactive mindset with a passion for continuous learning and professional development in the field of auditing.</p></li></ul><p><br></p>
<p>Our organization is conducting <strong>Walk In Interview</strong> for the <strong>Carpenter</strong> position.</p><br><p><strong>Walk in Details:</strong></p><ul><li><p><strong>Date:</strong> Sunday, 25 October 2026</p></li><li><p><strong>Time:</strong> 8:00 AM – 4:00 PM</p></li><li><p><strong>Venue:</strong> SilverCat – Gulf Craft Sheikh Khalifa Bin Zayed Street, Al Rashidiya 1, Ajman, UAE </p></li><li><p><strong>Google map location:</strong> https://maps.app.goo.gl/6VqTdiNf8TZMd7Vn8</p></li></ul><br><p><strong>Job Purpose</strong></p><p>To carry out carpentry, woodworking, cutting, assembly, and installation activities for</p><p>yacht and boat interiors, furniture, cabinetry, and other wooden components according</p><p>to technical drawings, design specifications, and quality standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Perform cutting, shaping, drilling, sanding, and assembly of wood, plywood, Teak</p></li></ul><p>wood, MDF, laminates, and other approved materials.</p><ul><li><p>Manufacture and install yacht interior furniture, cabinets, doors, panels,</p></li></ul><p>partitions, shelves, and decorative woodwork.</p><ul><li><p>Read and interpret technical drawings, measurements, templates, and work</p></li></ul><p>instructions.</p><ul><li><p>Measure, mark, cut, and assemble materials accurately using appropriate hand</p></li></ul><p>and power tools.</p><ul><li><p>Install and adjust furniture, cabinetry, flooring components, and interior fittings.</p></li><li><p>Carry out trimming, edge finishing, sanding, and other finishing work to achieve a</p></li></ul><p>high-quality appearance.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Technical training or vocational certification in carpentry is preferred.</p></li><li><p>Minimum 4–10 years of carpentry experience; yacht, boatbuilding, or marine</p></li></ul><p>interior experience is an advantage.</p><ul><li><p>Experience in furniture making, cabinetry, woodworking, and interior installation.</p></li><li><p>Ability to read measurements, templates, and technical drawings.</p></li><li><p>Proficiency in using woodworking hand tools and power tools.</p></li><li><p>Knowledge of plywood, MDF, laminates, veneers, and other woodworking</p></li></ul><p>materials.</p>
<p><strong>Civil Contracts Engineer</strong></p><p><strong>Location:</strong> Umm Al Quwain, UAE<br><strong>Employment Type:</strong> Full-time<br><strong>Industry:</strong> Construction / Civil Engineering<br><strong>Experience:</strong> 3 - 8 Years</p><p><strong>Job Summary</strong></p><p>We are looking for an experienced <strong>Civil Contracts Engineer</strong> to manage and administer construction contracts, ensuring that contractual obligations, commercial requirements, project timelines, and compliance standards are effectively maintained.</p><p>The ideal candidate will have strong experience in <strong>civil construction projects</strong>, contract administration, claims, variations, subcontract management, and commercial coordination.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Manage the day-to-day administration of civil construction contracts.</p></li><li><p>Review and interpret contract documents, specifications, drawings, and commercial terms.</p></li><li><p>Prepare, review, and negotiate contractual correspondence with clients, consultants, subcontractors, and suppliers.</p></li><li><p>Monitor contractual obligations, deliverables, milestones, and project requirements.</p></li><li><p>Manage <strong>variations, claims, extensions of time (EOT), and change orders</strong>.</p></li><li><p>Prepare and evaluate subcontract agreements and commercial documentation.</p></li><li><p>Review interim payment applications, valuations, and supporting documentation.</p></li><li><p>Maintain proper records of contractual notices, instructions, approvals, and correspondence.</p></li><li><p>Identify contractual and commercial risks and recommend appropriate mitigation measures.</p></li><li><p>Assist with the preparation and submission of claims and entitlement assessments.</p></li><li><p>Coordinate with Project Managers, Quantity Surveyors, Planning Engineers, Procurement, and Site Teams.</p></li><li><p>Ensure compliance with contract conditions and applicable company procedures.</p></li><li><p>Support dispute avoidance and resolution activities.</p></li><li><p>Prepare contractual and commercial reports for management.</p></li><li><p>Ensure all contractual documentation is properly maintained and updated.</p></li></ul><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in <strong>Civil Engineering, Quantity Surveying, Construction Management, or a related field</strong>.</p></li><li><p><strong>3-8 years of experience</strong> in contracts administration within civil construction.</p></li><li><p>Strong knowledge of construction contract principles and commercial practices.</p></li><li><p>Good understanding of variations, claims, EOT, payment terms, and subcontract administration.</p></li><li><p>Strong contractual and commercial negotiation skills.</p></li><li><p>Excellent written and verbal communication skills.</p></li><li><p>Ability to review and interpret technical and contractual documents.</p></li><li><p>Strong analytical, organizational, and problem-solving abilities.</p></li><li><p>Proficiency in <strong>MS Office</strong>, particularly Excel and Word.</p></li><li><p>Experience working with contractors, consultants, and clients in a project environment.</p><br></li></ul><p><strong>What We Offer</strong></p><ul><li><p>Competitive salary and benefits package.</p></li><li><p>Opportunity to work on major civil construction projects.</p></li><li><p>Professional development and career growth opportunities.</p></li><li><p>Collaborative and challenging project environment.</p><br></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p><strong>Preferred Qualifications</strong></p><ul><li><p>Professional certification in contracts, quantity surveying, or commercial management.</p></li><li><p>Experience with major infrastructure, roads, buildings, utilities, or other civil construction projects.</p></li><li><p>Knowledge of FIDIC / NEC / other international forms of contract.</p></li><li><p>Previous experience in the GCC construction industry is an advantage.</p></li></ul>
<ul><li>Consult with clients to understand their hair goals, offering personalized recommendations based on their face shape, hair type, and lifestyle.</li><li>Perform a range of hair services, including cutting, coloring, and styling, using advanced techniques to achieve the desired results.</li><li>Maintain a clean and organized workstation, ensuring all tools and equipment are sanitized and ready for use to promote a safe environment.</li><li>Stay updated with the latest trends and techniques in hairstyling to provide clients with modern and innovative looks.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A valid cosmetology license or diploma is essential for practicing as a hairdresser in your locality.</li><li>At least 2 years of hands-on experience in a salon setting, showcasing proficiency in various hairdressing techniques.</li><li>Familiarity with contemporary hair trends, styles, and products, enabling you to provide cutting-edge services.</li><li>Excellent communication skills to engage with clients effectively and understand their needs and preferences.</li></ul>
<p>The Assistant QHSE Manager will support the implementation, monitoring, and continual improvement of the Company's Quality, Health, Safety, and Environmental Management Systems. The role is responsible for ensuring compliance with client requirements, statutory regulations, ISO standards, and company procedures while promoting a strong safety culture and quality-focused work environment across all marine construction operations.</p><br><p><strong>Key Roles & Responsibilities</strong></p><br><p>1. Health, Safety & Environmental Management</p><br><ul><li><p>Implement and monitor the Company's HSE Management System across all project sites and workshops.</p></li><li><p>Ensure compliance with local regulations, client requirements, and company HSE policies.</p></li><li><p>Conduct risk assessments, Job Safety Analysis (JSA), HIRA, and method statement reviews.</p></li><li><p>Lead incident, accident, and near-miss investigations and prepare detailed reports with corrective and preventive actions.</p></li><li><p>Promote proactive safety management through inspections, observations, and coaching.</p></li><li><p>Implement and monitor Behavioral Based Safety (BBS) programs.</p></li><li><p>Conduct daily, weekly, and monthly HSE inspections and audits.</p></li><li><p>Ensure effective Permit to Work (PTW) implementation and compliance.</p></li><li><p>Monitor contractor and subcontractor HSE performance and compliance.</p></li><li><p>Facilitate toolbox talks, safety inductions, and awareness training programs.</p></li><li><p>Support emergency preparedness and response plans, including drills and rescue exercises.</p></li><li><p>Ensure readiness and proper management of H2S equipment, breathing apparatus, and emergency response systems.</p></li><li><p>Review safety statistics and develop action plans to improve HSE performance.</p></li><li><p>Liaise with client representatives on all HSE-related matters.</p></li><li><p>Prepare monthly HSE reports, KPI tracking, and management reviews.</p><br></li></ul><p>2. Quality Assurance & Quality Control</p><br><ul><li><p>Assist in maintaining and improving the Quality Management System in accordance with ISO 9001 requirements.</p></li><li><p>Coordinate document control for technical submittals, drawings, procedures, and project documentation.</p></li><li><p>Review and monitor Inspection and Test Plans (ITP), Method Statements, and Quality Plans.</p></li><li><p>Coordinate inspections with clients, third-party inspectors, and classification bodies where applicable.</p></li><li><p>Verify that all required inspections and testing activities are conducted and documented.</p></li><li><p>Ensure proper maintenance of quality records throughout project execution.</p></li><li><p>Conduct internal quality audits and monitor corrective actions.</p></li><li><p>Raise and monitor Non-Conformance Reports (NCRs) and ensure timely closure.</p></li><li><p>Coordinate root cause analysis and corrective/preventive actions.</p></li><li><p>Support material approval submissions, shop drawings, and as-built documentation processes.</p></li><li><p>Monitor welding, fabrication, coating, and marine construction quality activities.</p></li><li><p>Ensure compliance with project specifications, codes, standards, and client requirements.</p></li><li><p>Support continuous improvement initiatives across projects.</p><br></li></ul><p>3. Leadership & Management</p><br><ul><li><p>Support the QHSE Manager in developing departmental objectives and KPIs.</p></li><li><p>Supervise QHSE Officers, Inspectors, and site personnel.</p></li><li><p>Provide leadership in promoting a positive safety and quality culture.</p></li><li><p>Mentor project teams on QHSE best practices.</p></li><li><p>Coordinate with Project Managers, Construction Managers, Clients, and Contractors.</p></li><li><p>Exercise Stop Work Authority when unsafe acts or quality deviations are identified.</p></li><li><p>Participate in management review meetings and client audits.</p></li><li><p>Assist in preparing QHSE reports, statistics, and presentations for management.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Engineering or relevant technical discipline.</p></li><li><p>7 to 10 years of relevant QHSE experience.</p></li><li><p>Minimum 5 years in Marine Construction, Offshore, Shipbuilding, Marine Fabrication, or Oil & Gas projects.</p></li><li><p>Proven experience managing both HSE and QA/QC functions.</p></li><li><p>Experience working with international clients and contractors.</p></li><li><p>Strong knowledge of marine construction activities, fabrication, welding, lifting operations, and offshore safety requirements.</p></li></ul>
<p><strong>Job Title: Site Engineer</strong><br><strong>Location: Umm Al Quwain, UAE</strong><br><strong>Availability: Immediate Joiners Preferred</strong></p><p><strong>Job Description:</strong><br>We are looking for a skilled and proactive Site Engineer to join our team for an ongoing high-rise construction project. The ideal candidate will be responsible for overseeing daily site activities, ensuring construction work aligns with drawings and specifications, and supporting the Project Manager in the smooth execution of the project. This is an immediate requirement, and candidates who can join without delay will be given priority.</p><br><p><strong>Key Responsibilities:</strong></p><ul><li><p>Supervise and monitor daily construction activities on site to ensure work progresses as per schedule</p></li><li><p>Interpret and implement construction drawings, blueprints, and technical specifications accurately</p></li><li><p>Coordinate with contractors, subcontractors, and labor teams to ensure smooth workflow</p></li><li><p>Ensure construction work complies with quality standards, safety regulations, and project specifications</p></li><li><p>Conduct regular site inspections and report any deviations, defects, or issues to the Project Manager</p></li><li><p>Monitor and verify material quantities, deliveries, and usage on site</p></li><li><p>Maintain accurate site records, including daily progress reports, logbooks, and site diaries</p></li><li><p>Assist in preparing and updating project schedules and work programs</p></li><li><p>Coordinate with surveyors for site layout, leveling, and setting out works</p></li><li><p>Liaise with consultants, architects, and other engineers to resolve technical issues on site</p></li><li><p>Ensure adherence to health and safety protocols at all times</p></li><li><p>Support the Project Manager in workforce planning, productivity monitoring, and resource allocation</p></li><li><p>Identify potential risks or delays and escalate issues promptly for timely resolution</p></li><li><p>Participate in site meetings and provide technical input as required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements:</strong></p><ul><li><p>Bachelor's degree/Diploma in Civil Engineering or related field</p></li><li><p>Proven experience as a Site Engineer, preferably on high-rise or large-scale construction projects</p></li><li><p>Strong understanding of construction methods, materials, and project management principles</p></li><li><p>Ability to read and interpret technical drawings and specifications</p></li><li><p>Good communication and coordination skills</p></li><li><p>Ability to work under pressure and manage multiple tasks on site</p></li><li><p>Immediate availability to join is highly preferred</p></li><li><p>Must be based in or willing to relocate to Umm Al Quwain</p><br></li></ul>
<p><strong>Job Title: Site Engineer</strong><br><strong>Location: Umm Al Quwain, UAE</strong><br><strong>Availability: Immediate Joiners Preferred</strong></p><p><strong>Job Description:</strong><br>We are looking for a skilled and proactive Site Engineer to join our team for an ongoing high-rise construction project. The ideal candidate will be responsible for overseeing daily site activities, ensuring construction work aligns with drawings and specifications, and supporting the Project Manager in the smooth execution of the project. This is an immediate requirement, and candidates who can join without delay will be given priority.</p><br><p><strong>Key Responsibilities:</strong></p><ul><li><p>Supervise and monitor daily construction activities on site to ensure work progresses as per schedule</p></li><li><p>Interpret and implement construction drawings, blueprints, and technical specifications accurately</p></li><li><p>Coordinate with contractors, subcontractors, and labor teams to ensure smooth workflow</p></li><li><p>Ensure construction work complies with quality standards, safety regulations, and project specifications</p></li><li><p>Conduct regular site inspections and report any deviations, defects, or issues to the Project Manager</p></li><li><p>Monitor and verify material quantities, deliveries, and usage on site</p></li><li><p>Maintain accurate site records, including daily progress reports, logbooks, and site diaries</p></li><li><p>Assist in preparing and updating project schedules and work programs</p></li><li><p>Coordinate with surveyors for site layout, leveling, and setting out works</p></li><li><p>Liaise with consultants, architects, and other engineers to resolve technical issues on site</p></li><li><p>Ensure adherence to health and safety protocols at all times</p></li><li><p>Support the Project Manager in workforce planning, productivity monitoring, and resource allocation</p></li><li><p>Identify potential risks or delays and escalate issues promptly for timely resolution</p></li><li><p>Participate in site meetings and provide technical input as required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements:</strong></p><ul><li><p>Bachelor's degree/Diploma in Civil Engineering or related field</p></li><li><p>Proven experience as a Site Engineer, preferably on high-rise or large-scale construction projects</p></li><li><p>Strong understanding of construction methods, materials, and project management principles</p></li><li><p>Ability to read and interpret technical drawings and specifications</p></li><li><p>Good communication and coordination skills</p></li><li><p>Ability to work under pressure and manage multiple tasks on site</p></li><li><p>Immediate availability to join is highly preferred</p></li><li><p>Must be based in or willing to relocate to Umm Al Quwain</p><br></li></ul>
<p><strong>Job Title: Site Engineer</strong><br><strong>Location: Umm Al Quwain, UAE</strong><br><strong>Availability: Immediate Joiners Preferred</strong></p><p><strong>Job Description:</strong><br>We are looking for a skilled and proactive Site Engineer to join our team for an ongoing high-rise construction project. The ideal candidate will be responsible for overseeing daily site activities, ensuring construction work aligns with drawings and specifications, and supporting the Project Manager in the smooth execution of the project. This is an immediate requirement, and candidates who can join without delay will be given priority.</p><br><p><strong>Key Responsibilities:</strong></p><ul><li><p>Supervise and monitor daily construction activities on site to ensure work progresses as per schedule</p></li><li><p>Interpret and implement construction drawings, blueprints, and technical specifications accurately</p></li><li><p>Coordinate with contractors, subcontractors, and labor teams to ensure smooth workflow</p></li><li><p>Ensure construction work complies with quality standards, safety regulations, and project specifications</p></li><li><p>Conduct regular site inspections and report any deviations, defects, or issues to the Project Manager</p></li><li><p>Monitor and verify material quantities, deliveries, and usage on site</p></li><li><p>Maintain accurate site records, including daily progress reports, logbooks, and site diaries</p></li><li><p>Assist in preparing and updating project schedules and work programs</p></li><li><p>Coordinate with surveyors for site layout, leveling, and setting out works</p></li><li><p>Liaise with consultants, architects, and other engineers to resolve technical issues on site</p></li><li><p>Ensure adherence to health and safety protocols at all times</p></li><li><p>Support the Project Manager in workforce planning, productivity monitoring, and resource allocation</p></li><li><p>Identify potential risks or delays and escalate issues promptly for timely resolution</p></li><li><p>Participate in site meetings and provide technical input as required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements:</strong></p><ul><li><p>Bachelor's degree/Diploma in Civil Engineering or related field</p></li><li><p>Proven experience as a Site Engineer, preferably on high-rise or large-scale construction projects</p></li><li><p>Strong understanding of construction methods, materials, and project management principles</p></li><li><p>Ability to read and interpret technical drawings and specifications</p></li><li><p>Good communication and coordination skills</p></li><li><p>Ability to work under pressure and manage multiple tasks on site</p></li><li><p>Immediate availability to join is highly preferred</p></li><li><p>Must be based in or willing to relocate to Umm Al Quwain</p><br></li></ul>
<p>Our organization is conducting <strong>Walk In Interview</strong> for the <strong>Sander / Finisher </strong>position.</p><p><br></p><p><strong>Walk in Details:</strong></p><ul><li><p><strong>Date:</strong> Sunday, 25 October 2026</p></li><li><p><strong>Time:</strong> 8:00 AM – 4:00 PM</p></li><li><p><strong>Venue:</strong> SilverCat – Gulf Craft Sheikh Khalifa Bin Zayed Street, Al Rashidiya 1, Ajman, UAE</p></li><li><p><strong>Google map location:</strong> https://maps.app.goo.gl/6VqTdiNf8TZMd7Vn8</p></li></ul><p><br></p><p><strong>Job Purpose</strong></p><p>To perform sanding, surface preparation, fairing, and finishing activities on fiberglass,</p><p>GRP, and composite yacht components to achieve smooth surfaces and high-quality</p><p>finishes in accordance with production specifications and quality standards.</p><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Perform sanding, grinding, and surface preparation on fiberglass, GRP, and</p></li></ul><p>composite components.</p><ul><li><p>Prepare yacht hulls, decks, panels, and other components for painting, gelcoat</p></li></ul><p>application, or final finishing.</p><ul><li><p>Apply putty, filler, and fairing compounds where required to correct surface</p></li></ul><p>imperfections.</p><ul><li><p>Operate orbital sanders, grinders, polishing machines, and other finishing tools</p></li></ul><p>safely and effectively.</p><ul><li><p>Remove rough edges, scratches, surface irregularities, and excess material.</p></li><li><p>Carry out progressive sanding using appropriate abrasive grades to achieve the</p></li></ul><p>required surface finish.</p><ul><li><p>Inspect surfaces for pinholes, cracks, uneven areas, and other defects, and</p></li></ul><p>report them to the supervisor.</p><ul><li><p>Prepare surfaces for primer, paint, gelcoat, or other finishing processes.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Vocational training in sanding, surface preparation, or finishing is preferred.</p></li><li><p>Minimum 2–5 years of relevant experience in sanding or finishing; marine or</p></li></ul><p>yacht manufacturing experience is an advantage.</p><ul><li><p>Experience working with fiberglass, GRP, FRP, or composite materials is</p></li></ul><p>preferred.</p><ul><li><p>Familiarity with orbital sanders, grinders, polishing tools, fillers, and abrasives.</p></li><li><p>Knowledge of surface preparation techniques before painting or gelcoat</p></li></ul><p>application.</p>
<p>Our organization is conducting <strong>Walk In Interview</strong> for the <strong>Painter</strong> position.</p><br><p><strong>Walk in Details:</strong></p><ul><li><p><strong>Date:</strong> Sunday, 25 October 2026</p></li><li><p><strong>Time:</strong> 8:00 AM – 4:00 PM</p></li><li><p><strong>Venue:</strong> SilverCat – Gulf Craft Sheikh Khalifa Bin Zayed Street, Al Rashidiya 1, Ajman, UAE</p></li><li><p><strong>Google map location:</strong> https://maps.app.goo.gl/6VqTdiNf8TZMd7Vn8</p></li></ul><br><p><strong>Job Purpose</strong></p><p>To carry out surface preparation, priming, painting, and finishing of yacht and boat</p><p>components, ensuring a smooth, durable, high-quality finish in accordance with</p><p>technical specifications and company quality standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Prepare surfaces for painting through sanding, grinding, cleaning, masking, and</p></li></ul><p>removal of surface imperfections.</p><ul><li><p>Apply putty, fillers, and fairing compounds to achieve smooth and even surfaces.</p></li><li><p>Apply primers, undercoats, topcoats, and other approved coating materials.</p></li><li><p>Perform spray painting and other painting techniques as required.</p></li><li><p>Paint fiberglass, GRP, composite, metal, and interior yacht components using</p></li></ul><p>suitable coating systems.</p><ul><li><p>Operate spray guns, compressors, sanding machines, and other painting</p></li></ul><p>equipment safely.</p><ul><li><p>Mix paints, hardeners, thinners, and other coating materials according to</p></li></ul><p>manufacturer specifications.</p><ul><li><p>Follow specified drying, curing, and recoating times.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Vocational training or certification in painting is preferred.</p></li><li><p>Minimum 2–5 years of painting experience; marine or yacht painting experience</p><p>is an advantage.</p></li><li><p>Experience in spray painting, surface preparation, sanding, and coating</p><p>application.</p></li><li><p>Knowledge of primers, topcoats, two-component paints, fillers, and finishing</p><p>materials.</p></li><li><p>Ability to follow technical instructions and coating specifications.</p></li><li><p>Experience with fiberglass, GRP, composite, or marine-grade surfaces is</p><p>preferred.</p></li></ul>
<ol><li><p>Develop, maintain, and monitor detailed project schedules for high-rise residential, commercial, and mixed-use developments.</p></li><li><p>Prepare baseline programs, recovery schedules, and mitigation plans to ensure timely project delivery.</p></li><li><p>Monitor project progress against approved schedules and identify delays, risks, and corrective actions.</p></li><li><p>Coordinate with project managers, construction teams, consultants, subcontractors, and clients.</p></li><li><p>Prepare weekly and monthly progress reports, dashboards, and executive presentations.</p></li><li><p>Conduct critical path analysis (CPA), earned value management (EVM), and delay analysis.</p></li><li><p>Review contractor and subcontractor schedules for compliance with project requirements.</p></li><li><p>Track resource allocation, productivity, procurement schedules, and material delivery plans.</p></li><li><p>Support claims preparation and extension of time (EOT) submissions when required.</p></li><li><p>Participate in project review meetings and provide planning recommendations to management.</p></li><li><p>Ensure compliance with project milestones, contractual requirements, and company standards.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>10-15+ years of planning experience in construction projects.</p></li><li><p>Minimum 5 years in a Planning Manager role.</p></li><li><p>Proven experience in <strong>high-rise building projects (G+20 and above preferred)</strong>.</p></li><li><p>GCC/UAE construction experience is highly preferred.</p></li></ol>
<ul><li><p>Receive, inspect, and record incoming spare parts, materials, and equipment.</p></li><li><p>Maintain accurate inventory records and stock levels.</p></li><li><p>Issue spare parts and consumables to maintenance and operations teams.</p></li><li><p>Monitor stock availability and coordinate replenishment requirements with the Procurement Department.</p></li><li><p>Conduct periodic stock counts and inventory audits.</p></li><li><p>Ensure proper storage, labeling, and preservation of spare parts and materials.</p></li><li><p>Maintain inventory records in ERP systems and prepare inventory reports.</p></li><li><p>Track fast-moving and critical spare parts to avoid operational downtime.</p></li><li><p>Coordinate with workshop and fleet maintenance teams regarding parts requirements.</p></li><li><p>Ensure compliance with company safety, environmental, and housekeeping standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum <strong>3–5 years of experience</strong> as a Storekeeper in <strong>waste management, fleet maintenance, heavy equipment, construction, transportation, or industrial operations</strong>.</p></li><li><p>Strong knowledge of spare parts for heavy equipment, trucks, compactors, loaders, excavators, and waste management machinery.</p></li><li><p>Experience with inventory management systems and ERP software.</p></li><li><p>Proficiency in Microsoft Excel and inventory reporting.</p></li><li><p>Good organizational and communication skills.</p></li><li><p>Ability to work in a fast-paced operational environment.</p></li></ul>
<p>We are hiring a highly skilled <strong>Mechanical & Electrical Maintenance Technician – Injection Moulding</strong> for our plastic manufacturing facility in Umm Al Quwain, UAE.</p><p>The candidate must have strong practical experience maintaining large-tonnage injection moulding machines, particularly <strong>Tederic 2700T–3000T or higher</strong>.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Perform mechanical and electrical maintenance of heavy-duty injection moulding machines.</p></li><li><p>Troubleshoot PLCs, servo motors, hydraulic systems, pumps, sensors, motors, and electrical control panels.</p></li><li><p>Perform injection mould maintenance, inspection, repair, and troubleshooting.</p></li><li><p>Independently diagnose and resolve complex machine breakdowns.</p></li><li><p>Carry out preventive and corrective maintenance to minimize downtime.</p></li><li><p>Monitor machine performance and identify potential technical issues.</p></li><li><p>Coordinate with production operators to maintain smooth manufacturing operations.</p></li><li><p>Maintain equipment safety and follow company HSE procedures.</p></li><li><p>Ensure maximum machine efficiency, reliability, and productivity.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>xperience:</strong> 5–10 years in industrial machine maintenance, preferably large-tonnage injection moulding machines.</p></li><li><p><strong>Machine Knowledge:</strong> Hands-on experience with Tederic 2700T, 3000T, or similar large-tonnage machines.</p></li><li><p><strong>Technical Skills:</strong> Strong mechanical, electrical, PLC troubleshooting, servo motor, sensor, and hydraulic system knowledge.</p></li><li><p><strong>Mould Maintenance:</strong> Practical experience maintaining and repairing injection moulds.</p></li><li><p><strong>Education:</strong> Diploma or Bachelor's Degree in Mechanical or Electrical Engineering.</p></li><li><p><strong>Industry:</strong> Plastic manufacturing / injection moulding.</p></li><li><p><strong>Location:</strong> Must be currently residing in the UAE and available for an in-person interview.</p></li><li><p><strong>Work Location:</strong> Umm Al Quwain, UAE.</p></li><li><p><strong>Employment:</strong> Full-time, on-site.</p></li></ul><p><strong>Important:</strong> We require a technically skilled professional capable of independently maintaining our Tederic 2700-ton injection moulding machine, resolving difficult breakdowns, minimizing downtime, and ensuring reliable production.</p><p>Only candidates with strong hands-on troubleshooting and maintenance experience on large injection moulding machines should apply.</p>
<br><p>To manage end-to-end recruitment for bulk hiring requirements across construction and engineering projects in the UAE. The role involves close coordination with stakeholders, project teams, and HR to ensure timely mobilization of qualified candidates.</p><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Manage full-cycle recruitment for bulk roles (Civil, MEP, Infrastructure, Marine, Fit-out, etc.).</p></li><li><p>Source candidates through job portals, databases, referrals, and recruitment drives.</p></li><li><p>Screen, shortlist, and conduct initial interviews for technical and non-technical roles.</p></li><li><p>Coordinate with hiring managers, project managers, and department heads to understand manpower requirements.</p></li><li><p>Schedule and facilitate interviews between stakeholders and candidates.</p></li><li><p>Handle large-volume hiring within tight project timelines.</p></li><li><p>Ensure compliance with UAE labor laws and company recruitment policies.</p></li><li><p>Maintain recruitment trackers, reports, and candidate databases.</p></li><li><p>Coordinate offer letters, salary negotiations, and onboarding processes.</p></li><li><p>Support mobilization for site-based and project-based requirements.</p></li></ul><p><strong>Stakeholder Management</strong></p><ul><li><p>Conduct regular meetings with internal stakeholders to forecast manpower needs.</p></li><li><p>Provide recruitment progress updates and market insights.</p></li><li><p>Align hiring strategies with project deadlines and business objectives.</p></li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Human Resources, Business Administration, or related field.</p></li><li><p>Minimum 3 years of recruitment experience in Construction or Engineering division (UAE experience preferred).</p></li><li><p>Proven experience in bulk hiring and site/project-based recruitment.</p></li><li><p>Strong understanding of construction roles (Engineers, Supervisors, Foremen, Skilled & Unskilled workforce).</p></li><li><p>Excellent communication and stakeholder management skills.</p></li><li><p>Ability to work under pressure and meet tight deadlines.</p></li><li><p>Familiarity with UAE labor market and recruitment portals.</p><br></li></ul><p><strong>Preferred Skills</strong></p><ul><li><p>Experience handling overseas recruitment is an advantage.</p></li><li><p>Knowledge of visa processing and mobilization procedures in the UAE.</p></li><li><p>Strong negotiation and coordination skills.</p></li></ul>
Receive email alerts for Factory Jobs jobs
You can cancel your email alert at anytime