Materials Engineer Jobs

<ul><li>Lead the design, development, and implementation of MEP systems for complex fit-out projects, ensuring compliance with project specifications and building codes.</li><li>Oversee the coordination between MEP disciplines (Electrical, Mechanical, Plumbing, Firefighting) and architectural/structural elements to resolve clashes and optimize space utilization.</li><li>Manage the procurement process for MEP equipment and materials, performing technical evaluations of supplier proposals and ensuring timely delivery.</li><li>Conduct site inspections and quality control checks during the construction phase, identifying deviations and implementing corrective actions to maintain project standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical, Electrical, or Plumbing Engineering from a reputable institution.</li><li>Professional Engineer (PE) license or equivalent international certification is highly preferred.</li><li>Minimum of 8-10 years of progressive experience specifically in MEP design and execution for fit-out projects.</li><li>Proven track record in managing and delivering multiple complex fit-out projects within budget and schedule.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>1. Drawing Review &amp; Production Release:</strong></p><ul><li><p>Review IFC drawings, shop drawings, GA drawings, fabrication drawings, and BOM before production start.</p></li><li><p>Coordinate with detailing / engineering department for missing details, revisions, and discrepancies.</p></li><li><p>Ensure only latest approved drawings are released to production.</p></li><li><p>Break down drawings into production priorities by project, zone, sequence, and delivery requirement.</p></li><li><p>Prepare production mark-wise execution plans.</p></li></ul><p><strong>2. Material Planning &amp; Control:</strong></p><ul><li><p>Coordinate with Procurement and Stores for raw material availability (plates, beams, channels, pipes, bolts, consumables).</p></li><li><p>Verify material traceability, heat numbers, MTC availability, and stock status.</p></li><li><p>Ensure timely issuance of materials to cutting / fabrication sections.</p></li><li><p>Monitor shortages and raise material requests proactively.</p></li><li><p>Control wastage, nesting efficiency, and scrap reduction.</p></li></ul><p><strong>3. Production Scheduling &amp; Shop Floor Management:</strong></p><ul><li><p>Prepare daily / weekly / monthly fabrication production plans.</p></li><li><p>Allocate work to cutting, fit-up, welding, drilling, machining, blasting, painting, and assembly sections.</p></li><li><p>Monitor target vs actual production tonnage / quantities.</p></li><li><p>Ensure bottlenecks are resolved immediately.</p></li><li><p>Optimize machine loading and workflow movement inside factory.</p></li></ul><p><strong>4. Fabrication &amp; Welding Control:</strong></p><ul><li><p>Supervise fit-up, welding, grinding, straightening, and assembly works.</p></li><li><p>Ensure fabrication as per approved drawings, tolerances, and standards.</p></li><li><p>Monitor WPS / PQR / welder qualification compliance where applicable.</p></li><li><p>Ensure weld quality and dimensional accuracy.</p></li><li><p>Coordinate rework actions if defects identified.</p></li></ul><p><strong>5. Quality Assurance / NCR Management:</strong></p><ul><li><p>Coordinate with QA/QC for in-process and final inspections.</p></li><li><p>Ensure hold points and inspection stages are completed.</p></li><li><p>Raise, track, and close all <strong>NCRs (Non-Conformance Reports)</strong> on priority basis.</p></li><li><p>Investigate root causes of NCRs and implement corrective / preventive actions.</p></li><li><p>Maintain punch lists, rejection logs, and quality improvement records.</p></li></ul><p><strong>6. Surface Preparation / Painting / Finishing:</strong></p><ul><li><p>Coordinate blasting, primer, paint system application, DFT checks, touch-up, and final finish.</p></li><li><p>Ensure painting specs comply with project requirements.</p></li><li><p>Monitor curing, handling, and damage prevention before dispatch.</p></li></ul><p><strong>7. Packing, Dispatch &amp; Delivery Coordination:</strong></p><ul><li><p>Prepare dispatch priorities based on site erection sequence and client requirements.</p></li><li><p>Coordinate with logistics for trailers, loading plans, permits, and delivery schedules.</p></li><li><p>Ensure proper tagging, packing lists, delivery notes, and mark identification.</p></li><li><p>Prevent shortages / wrong loading / damaged materials.</p></li><li><p>Track delivered vs pending items until final closeout.</p></li></ul><p><strong>8. Coordination with Other Departments:</strong></p><ul><li><p>Work closely with Planning Engineer, Project Engineer, QA/QC, Stores, Procurement, Maintenance, and Logistics teams.</p></li><li><p>Attend production meetings and submit progress updates.</p></li><li><p>Coordinate urgent site requirements and replacement items.</p></li></ul><p><strong>9. Reporting &amp; Documentation:</strong></p><ul><li><p>Prepare daily production reports, backlog reports, efficiency reports, and delay analysis.</p></li><li><p>Maintain drawing status, production trackers, NCR logs, and dispatch summaries.</p></li><li><p>Update management on risks affecting deadlines.</p></li></ul><p><strong>10. Cost Control / Productivity Improvement:</strong></p><ul><li><p>Reduce rework, downtime, material waste, and overtime misuse.</p></li><li><p>Improve productivity per man-hour and machine-hour.</p></li><li><p>Suggest lean improvements and process enhancements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Bachelor’s Degree / Diploma in Mechanical / Civil / Production Engineering or related field.</p></li><li><p><strong>5+ years experience</strong> in steel fabrication / structural steel production.</p></li><li><p>UAE / GCC experience preferred.</p></li><li><p>Strong knowledge of fabrication drawings, welding, machining, painting, and dispatch systems.</p></li><li><p>Good command of Excel, ERP systems, and production reporting.</p></li><li><p>Strong leadership and problem-solving ability.</p></li></ol><p></p></section>

With over 50 years of excellence, Waagner Biro Bridge Services is a leader in construction engineering across Dubai and the UAE. We specialise in innovative solutions for bridge systems, steel structures, and infrastructure projects, serving both government and private sectors.<br><br>Backed by a skilled team of engineers, we handle every stage, from design to construction and maintenance, with precision and quality. Our commitment to innovation and sustainability drives us to deliver projects that stand the test of time.<br><br>Learn more: https://waagnerbiro-bridgeservices.com/<br><br><br><br>Job Description<br><br>Supervise and monitor daily bridge maintenance and repair activities at site to ensure works are executed safely, efficiently, and according to project requirements. Coordinate with Project Engineers, Supervisors, subcontractors, and site teams to ensure smooth execution of maintenance activities. Ensure construction and maintenance works are carried out as per approved drawings, method statements, specifications, and quality standards. Conduct regular site inspections and monitor workmanship, materials, and progress of works. Assist in planning daily activities, manpower allocation, and resource requirements. Review technical drawings and provide necessary technical support to site teams. Ensure compliance with project HSE requirements and safe work practices. Maintain site records, including daily reports, inspection requests, material records, and progress updates. Coordinate with the QA/QC team for inspections and ensure quality requirements are achieved. Report site issues, delays, and technical challenges to the Project Engineer and support timely resolution. Assist in measurement of completed works and preparation of project documentation. <br><br><br>Qualifications<br><br>Bachelor's Degree in Civil Engineering. Minimum 5 years of experience as a Civil Site Engineer in bridge maintenance, bridge rehabilitation, or bridge construction projects in the UAE. Hands-on experience in bridge-related works such as structural repairs, concrete repairs, waterproofing, protective coating, expansion joints, bearings, and general maintenance activities. Experience working on UAE infrastructure projects is mandatory. Experience with Abu Dhabi Municipality (ADM) bridge projects will be an advantage. Valid UAE Driving License is mandatory.<br><br><br>Additional Information<br><br>Good knowledge of bridge maintenance and civil construction activities. Ability to read and interpret engineering drawings and specifications. Strong site supervision and coordination skills. Good understanding of UAE construction standards and HSE requirements. Good communication and reporting skills. Ability to coordinate with subcontractors, consultants, and project teams. Proficiency in Microsoft Office applications. Ability to work independently and manage site activities effectively.

With over 50 years of excellence, Waagner Biro Bridge Services is a leader in construction engineering across Dubai and the UAE. We specialise in innovative solutions for bridge systems, steel structures, and infrastructure projects, serving both government and private sectors.<br><br>Backed by a skilled team of engineers, we handle every stage, from design to construction and maintenance, with precision and quality. Our commitment to innovation and sustainability drives us to deliver projects that stand the test of time.<br><br>Learn more: https://waagnerbiro-bridgeservices.com/<br><br><br><br>Job Description<br><br>Supervise and monitor daily bridge maintenance and repair activities at site to ensure works are executed safely, efficiently, and according to project requirements. Coordinate with Project Engineers, Supervisors, subcontractors, and site teams to ensure smooth execution of maintenance activities. Ensure construction and maintenance works are carried out as per approved drawings, method statements, specifications, and quality standards. Conduct regular site inspections and monitor workmanship, materials, and progress of works. Assist in planning daily activities, manpower allocation, and resource requirements. Review technical drawings and provide necessary technical support to site teams. Ensure compliance with project HSE requirements and safe work practices. Maintain site records, including daily reports, inspection requests, material records, and progress updates. Coordinate with the QA/QC team for inspections and ensure quality requirements are achieved. Report site issues, delays, and technical challenges to the Project Engineer and support timely resolution. Assist in measurement of completed works and preparation of project documentation. <br><br><br>Qualifications<br><br>Bachelor's Degree in Civil Engineering. Minimum 5 years of experience as a Civil Site Engineer in bridge maintenance, bridge rehabilitation, or bridge construction projects in the UAE. Hands-on experience in bridge-related works such as structural repairs, concrete repairs, waterproofing, protective coating, expansion joints, bearings, and general maintenance activities. Experience working on UAE infrastructure projects is mandatory. Experience with Abu Dhabi Municipality (ADM) bridge projects will be an advantage. Valid UAE Driving License is mandatory.<br><br><br>Additional Information<br><br>Good knowledge of bridge maintenance and civil construction activities. Ability to read and interpret engineering drawings and specifications. Strong site supervision and coordination skills. Good understanding of UAE construction standards and HSE requirements. Good communication and reporting skills. Ability to coordinate with subcontractors, consultants, and project teams. Proficiency in Microsoft Office applications. Ability to work independently and manage site activities effectively.

With over 50 years of excellence, Waagner Biro Bridge Services is a leader in construction engineering across Dubai and the UAE. We specialise in innovative solutions for bridge systems, steel structures, and infrastructure projects, serving both government and private sectors.<br><br>Backed by a skilled team of engineers, we handle every stage, from design to construction and maintenance, with precision and quality. Our commitment to innovation and sustainability drives us to deliver projects that stand the test of time.<br><br>Learn more: https://waagnerbiro-bridgeservices.com/<br><br><br><br>Job Description<br><br>Supervise and monitor daily bridge maintenance and repair activities at site to ensure works are executed safely, efficiently, and according to project requirements. Coordinate with Project Engineers, Supervisors, subcontractors, and site teams to ensure smooth execution of maintenance activities. Ensure construction and maintenance works are carried out as per approved drawings, method statements, specifications, and quality standards. Conduct regular site inspections and monitor workmanship, materials, and progress of works. Assist in planning daily activities, manpower allocation, and resource requirements. Review technical drawings and provide necessary technical support to site teams. Ensure compliance with project HSE requirements and safe work practices. Maintain site records, including daily reports, inspection requests, material records, and progress updates. Coordinate with the QA/QC team for inspections and ensure quality requirements are achieved. Report site issues, delays, and technical challenges to the Project Engineer and support timely resolution. Assist in measurement of completed works and preparation of project documentation. <br><br><br>Qualifications<br><br>Bachelor's Degree in Civil Engineering. Minimum 5 years of experience as a Civil Site Engineer in bridge maintenance, bridge rehabilitation, or bridge construction projects in the UAE. Hands-on experience in bridge-related works such as structural repairs, concrete repairs, waterproofing, protective coating, expansion joints, bearings, and general maintenance activities. Experience working on UAE infrastructure projects is mandatory. Experience with Abu Dhabi Municipality (ADM) bridge projects will be an advantage. Valid UAE Driving License is mandatory.<br><br><br>Additional Information<br><br>Good knowledge of bridge maintenance and civil construction activities. Ability to read and interpret engineering drawings and specifications. Strong site supervision and coordination skills. Good understanding of UAE construction standards and HSE requirements. Good communication and reporting skills. Ability to coordinate with subcontractors, consultants, and project teams. Proficiency in Microsoft Office applications. Ability to work independently and manage site activities effectively.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Prepare Bills of Quantities (BOQs), quantity take-offs, and cost estimates from drawings and specifications. Monitor project costs, budgets, and cash flow throughout the project lifecycle. Prepare and submit interim payment applications, invoices, and final accounts. Evaluate, negotiate, and certify subcontractor and supplier payments. Prepare and assess variation orders, claims, and change orders. Review contract documents and ensure compliance with contractual obligations. Conduct site measurements and verify completed work for payment certification. Prepare monthly cost reports, forecasts, and commercial progress reports. Coordinate with project managers, engineers, consultants, clients, and procurement teams. Support procurement by preparing material enquiries, comparing quotations, and recommending suppliers and subcontractors. Identify commercial risks and recommend cost-saving and value engineering solutions. Maintain records of contracts, variations, correspondence, and project documentation. Assist in project budgeting, tender evaluations, and post-contract administration. Ensure compliance with company policies, project specifications, and UAE construction standards. Requirements Bachelor's Degree in Quantity Surveying, Civil Engineering, Construction Management, or a related discipline. Minimum 4–8 years of experience as a Quantity Surveyor in interior fit-out projects within the UAE/GCC. Benefits As per company norms</p> </div>

<ul><li>Oversee daily construction activities, ensuring adherence to project plans and specifications while managing on-site teams effectively.</li><li>Conduct regular inspections of work sites to maintain quality standards and ensure compliance with safety regulations and building codes.</li><li>Collaborate with architects and engineers to resolve design issues, ensuring that all modifications are documented and executed accurately.</li><li>Prepare and maintain detailed daily reports on project progress, including labor, materials used, and any discrepancies encountered.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or a related field, providing a solid foundation in engineering principles and practices.</li><li>A minimum of 3-5 years of relevant site engineering experience, demonstrating a track record of on-site project management and execution.</li><li>Possession of a valid engineering license or certification, such as Chartered Engineer (CEng) or Professional Engineer (PE), showcasing professional credibility.</li><li>Proven experience in construction management software (e.g., AutoCAD, Primavera, or MS Project), enhancing planning and execution capabilities.</li></ul>

<ul><li>Oversee daily construction activities, ensuring adherence to project plans and specifications while managing on-site teams effectively.</li><li>Conduct regular inspections of work sites to maintain quality standards and ensure compliance with safety regulations and building codes.</li><li>Collaborate with architects and engineers to resolve design issues, ensuring that all modifications are documented and executed accurately.</li><li>Prepare and maintain detailed daily reports on project progress, including labor, materials used, and any discrepancies encountered.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering or a related field, providing a solid foundation in engineering principles and practices.</p></li><li><p>A minimum of 5 years of relevant site engineering experience, demonstrating a track record of on-site project management and execution.</p></li><li><p>Possession of a valid engineering license or certification, such as Chartered Engineer (CEng) or Professional Engineer (PE), showcasing professional credibility.</p></li><li><p>Proven experience in construction management software (e.g., AutoCAD, Primavera, or MS Project), enhancing planning and execution capabilities.</p></li></ul>

About the Role<br>To provide competitive engineering proposals, design calculations, and specialized geotechnical and marine solutions.<br>Responsibilities<br>Prepare specialized engineering bids for marine works, ground improvement works, piling, shoring & dewatering works etc. Develop engineering submittals, including but not limited to method statements, Risk assessments, ITP’s, Checklists, material submittals for the project specific scope of works. Engineering Design: Perform stability analysis and design for Piling & Shoring, Soil Improvement schemes, Marine works, rehabilitation works etc.<br>Qualifications<br>Bachelor’s degree in civil or Geotechnical Engineering5 years in a design/tendering role for a specialized contractor Specialized knowledge in Soil Improvement, and Piling/Shoring design<br>Required Skills<br>Analytical: Expert in PLAXIS 2D/3D, GEO5 or similar Commercial: Proficiency in quantity take-offs and cost estimation for specialized materials Drafting: Advanced Auto CAD skills

Company Description The company is a civil engineering organization focused on delivering high-quality construction projects with strong emphasis on safety, compliance, and sustainable practices. It operates in Al Saadiyat Island and surrounding areas, supporting residential, commercial, and infrastructure developments. The company values technical excellence, collaboration, and continuous improvement in all phases of project execution. Team members are encouraged to contribute ideas, uphold quality standards, and support a culture of integrity and accountability. Joining this team offers opportunities for professional growth through involvement in complex projects and coordination with multidisciplinary stakeholders. Role Description This is a full-time, on-site role for a Quality Assurance/Quality Control (QA/QC) Civil Engineer based on Al Saadiyat Island. The QA/QC Civil Engineer oversees and verifies that construction works comply with approved drawings, specifications, codes, and project quality plans. Day-to-day tasks include inspecting civil works, reviewing material approvals, monitoring contractors’ activities, and preparing inspection reports and non-conformance reports when needed. The role involves coordinating with site engineers, contractors, and consultants, conducting regular audits, and ensuring corrective and preventive actions are implemented. The QA/QC Civil Engineer also supports testing and commissioning activities, maintains accurate documentation, and contributes to continuous improvement of quality procedures and standards. Qualifications Strong knowledge of civil engineering principles, construction methods, and relevant codes and standards (e.g., ASTM, ACI, AASHTO, local regulations). Experience in quality assurance and quality control for civil works, including inspection of structural, infrastructure, and finishing activities. Proficiency in interpreting engineering drawings, technical specifications, and method statements. Ability to prepare and review quality documentation such as ITPs, checklists, inspection reports, NCRs, and corrective action plans. Familiarity with laboratory and field testing of construction materials (concrete, steel, soil, asphalt) and acceptance criteria. Effective coordination and communication skills for working with contractors, consultants, and internal project teams. Competence in using common office and engineering software (e.g., MS Office, Auto CAD or similar, and basic QA/QC tracking tools). Bachelor’s degree in Civil Engineering or a closely related discipline. Previous on-site experience in building or infrastructure projects, preferably in QA/QC roles. Attention to detail, strong problem-solving abilities, and commitment to safety and compliance. Relevant professional certifications in quality management or civil engineering (e.g., ISO 9001, PMP, or equivalent) are considered an advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a hands-on Infrastructure Deployment Engineer to join the Deployment Team.&nbsp;</p><br> <p>This role is responsible for implementing infrastructure solutions based on high-level system designs provided by the Infrastructure System Engineering team.</p><br> <p>The engineer will define hardware configurations, prepare detailed rack and network diagrams, manage procurement technical specifications, integrate hardware and virtualization platforms, and support infrastructure deployments in mission-critical environments.</p><br> <p>In addition, the role contributes to maintaining and improving the company’s internal infrastructure platform.</p><br> <p><span>Responsibilities</span></p><br> <p><span>Infrastructure Implementation (Project-Focused)</span></p><br> <ul> <li>Translate high-level infrastructure designs into detailed implementation plans</li> <li>Define hardware specifications and prepare Bills of Materials (BOMs)</li> <li>Design rack layouts, power distribution, and structured cabling diagrams</li> <li>Configure and deploy physical servers, storage, and networking equipment</li> <li>Implement virtualization platforms (VMware, KVM, LXC etc.)</li> <li>Deploy and configure Kubernetes clusters and container runtimes when required</li> <li>Implement network configurations (VLANs, routing, firewalls, segmentation)</li> <li>Support system integration and site deployments (on-prem or tactical environments)</li> <li>Perform validation, testing, and troubleshooting of deployed systems</li> </ul> <p><span>Hardware &amp; Vendor Coordination</span></p><br> <ul> <li>Evaluate hardware vendors and technical solutions</li> <li>Support procurement process with technical documentation</li> <li>Validate delivered hardware against specifications</li> <li>Manage firmware updates, compatibility checks, and lifecycle tracking</li> </ul> <p><span>Internal Infrastructure Support</span></p><br> <ul> <li>Support and maintain company internal virtualization and compute platforms</li> <li>Contribute to improvements in monitoring, automation, and reliability</li> <li>Assist with troubleshooting production infrastructure issues</li> </ul> <p><span>Documentation &amp; Compliance</span></p><br> <ul> <li>Produce detailed low-level design (LLD) documentation</li> <li>Maintain as-built diagrams and configuration records</li> <li>Support compliance with security and defense standards as required</li> </ul> <p><span>Requirements</span></p><br> <ul> <li>5+ years of hands-on experience in infrastructure deployment or systems engineering</li> <li>Strong experience with physical server installation and configuration</li> <li>Strong networking knowledge (VLANs, routing, firewalls, VPNs)</li> <li>Experience with virtualization platforms (i.e VMware ESXi, vCenter, KVM)</li> <li>Experience deploying container platforms (i.e Docker, Kubernetes, Openshift)</li> <li>Experience creating rack diagrams and structured cabling documentation</li> <li>Experience preparing hardware specifications and BOMs</li> <li>Solid Linux administration skills</li> <li>Strong troubleshooting skills in complex integrated environments</li> </ul> <p><span>Nice to Have</span></p><br> <ul> <li>Experience in defense / military projects</li> <li>Experience with ruggedized or tactical hardware deployments</li> <li>Familiarity with MIL-STD or DoD environments</li> <li>Experience with secure or air-gapped systems</li> <li>Basic automation knowledge (Ansible, scripting)</li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a qualified and detail-oriented Irrigation Engineer to design, implement, and maintain efficient irrigation systems for landscaping, agricultural, commercial, or infrastructure projects. The ideal candidate will have experience in irrigation design, water distribution systems, site supervision, and maintenance activities while ensuring compliance with project specifications and sustainability standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Design and develop irrigation systems including drip, sprinkler, and automated irrigation networks.</p></li><li><p>Prepare irrigation layouts, hydraulic calculations, and technical drawings.</p></li><li><p>Review project specifications, BOQs, and irrigation design requirements.</p></li><li><p>Supervise installation and maintenance of irrigation systems on-site.</p></li><li><p>Monitor water usage efficiency and recommend sustainable irrigation solutions.</p></li><li><p>Coordinate with landscape architects, MEP teams, contractors, and consultants.</p></li><li><p>Inspect irrigation materials, pumps, valves, pipelines, and control systems for quality compliance.</p></li><li><p>Troubleshoot irrigation system issues and recommend corrective actions.</p></li><li><p>Ensure compliance with safety, environmental, and municipality regulations.</p></li><li><p>Prepare technical reports, progress updates, and maintenance schedules.</p></li><li><p>Support testing, commissioning, and handover activities.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Agricultural Engineering, Civil Engineering, Landscape Engineering, or related field.</p></li><li><p>Minimum 3–8 years of irrigation engineering experience.</p></li><li><p>Strong knowledge of irrigation systems, pumps, hydraulics, and water management.</p></li><li><p>Experience with AutoCAD and irrigation design software.</p></li><li><p>Knowledge of landscaping and infrastructure projects preferred.</p></li><li><p>Good project coordination and communication skills.</p></li><li><p>UAE/GCC experience is an advantage.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Rotational Support / Remote Engineer - Instrument &amp; Control to join its to join its UAE business unit: This is a full-time position in Sharjah, UAE.<br> The rotational support Instrument &amp; Control (I&amp;C) Engineer will provide day to day I&amp;C Engineering support for site<br> operations related queries / activities / risks to delivery of safe, reliable and compliant operations. Collaborates with site<br> based team to ensure that identified longer term engineering solutions are progressed to the appropriate team to reduce<br> risk and grow production</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Rotational Support / Remote Engineer - Process to join its to join its UAE business unit: This is a full-time position in Sharjah, UAE.<br> The rotational support / Remote Process Engineer will provide day to day Process Engineering support for site operations related<br> queries / activities / risks to delivery of safe, reliable and compliant operations. Collaborates with site based team to<br> ensure that identified longer term engineering solutions are progressed to the appropriate team to reduce risk and grow<br> production.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Conduct market research to identify selling possibilities and evaluate customer needs</p></li><li><p>Actively seek out new sales opportunities through cold calling, client visits and social media</p></li><li><p>Set up meetings with potential clients and address queries</p></li><li><p>Prepare and deliver appropriate presentations on products and services</p></li><li><p>Create frequent reviews and reports with sales and inquiries</p></li><li><p>Participate on behalf of the company in exhibitions or conferences</p></li><li><p>Negotiate/close deals and handle complaints or objections</p></li><li><p>Following up with support team to process the order &amp; ensure the material delivery to</p></li></ul><p>customer</p><ul><li><p>Collaborate with team members to achieve the monthly sales target</p></li><li><p>Gather feedback from customers or prospects and share with internal teams</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>A diploma or bachelor's degree in engineering/science</p></li><li><p>3 – 9 years of experience in selling technical products to Oil &amp; Gas, Marine and Construction</p></li></ul><p>industries (Preferred).</p><ul><li><p>Strong communication, interpersonal, customer service, and sales skills</p></li><li><p>Proficiency in English and excellent knowledge of MS Office</p></li><li><p>Excellent technical and problem-solving skills.</p></li><li><p>Experience of selling technical products</p></li><li><p>Thorough understanding of marketing and negotiating techniques</p></li><li><p>Fast learner and passion for sales</p></li><li><p>UAE driving license is a must</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Develop and implement comprehensive plumbing quality control plans, ensuring adherence to project specifications and international standards.</li><li>Conduct rigorous inspections of plumbing materials, components, and installed systems to verify compliance and identify defects.</li><li>Oversee the testing of plumbing systems, including pressure testing, leak detection, and flow rate verification, documenting all results.</li><li>Review and approve shop drawings, material submittals, and method statements related to plumbing installations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related technical field.</li><li>Minimum of 5 years of progressive experience in QA/QC roles specifically within the plumbing sector of construction or infrastructure projects.</li><li>Professional certifications such as Certified Plumbing Inspector (CPI) or equivalent are highly desirable.</li><li>Proficiency in reading and interpreting complex plumbing drawings, specifications, and relevant building codes (e.g., IPC, UPC).</li></ul><p></p></section>

<p>Guildhall is looking for an experienced Structural Engineer to oversee structural coordination, site execution, and technical delivery across iconic tower developments. Key Responsibilities: 1. Structural Design & Coordination • Review and coordinate structural drawings, calculations, and technical specifications for high-rise building projects • Ensure all structural works are executed according to approved drawings, design standards, and project requirements • Coordinate with architects, MEP engineers, consultants, and contractors to resolve structural and technical issues 2. Site Supervision & Technical Support • Monitor construction progress and provide technical support during all project phases • Conduct site inspections and ensure structural quality, safety, and compliance standards are met • Support site teams with engineering solutions and resolve structural challenges during execution 3. Documentation & Compliance • Review shop drawings, material submittals, method statements, and RFIs related to structural works • Ensure compliance with Dubai Municipality requirements, UAE regulations, and international engineering codes • Assist with structural risk assessments and implement corrective actions where required 4. Value Engineering & Optimization • Support value engineering initiatives and recommend practical structural solutions to improve project efficiency and cost effectiveness • Provide recommendations for construction methodologies and technical enhancements where applicable 5. Coordination & Reporting • Participate in project meetings with stakeholders and consultants • Provide regular technical reports and project updates to management • Coordinate effectively with project teams to ensure timely issue resolution and project continuity</p><p>• Bachelor’s Degree in Civil Engineering, Structural Engineering, or related field • Minimum 5–10 years of experience in structural engineering within high-rise building construction projects • Strong experience in reinforced concrete, steel structures, and tower developments (G+12 and above) • UAE project experience is highly preferred • Strong understanding of structural analysis, engineering principles, and construction methodologies • Familiarity with Dubai Municipality regulations, UAE building codes, and international standards • Proficiency in ETABS, SAFE, STAAD Pro, AutoCAD, and Revit is highly preferred • DM Certified Engineer (Unlimited Floors) is highly preferred or considered an advantage • Emaar project experience is preferred • Arabic speakers are preferred</p>

We are seeking a Senior Procurement Engineer (Civil) with proven experience in handling procurement for high-end interior fit-out projects valued at AED 50 million and above.<br>Key Responsibilities:Research and identify potential suppliers specializing in interior fitout and MEP materials and services. Sending enquiries to qualified suppliers and following up for receipt of offers . Received offers have to be reviewed and comparison charts has to be made for management approval Collaborate with project managers and engineers to understand project requirements and develop a procurement log Maximize company savings by selecting the most suitable products at competitive prices and benchmarking them against market rates and similar vendors. A report detailing the achieved savings should be updated and reviewed monthly. Ensure that POs include accurate terms and conditions, pricing, payment terms, and delivery schedules. Build and maintain positive relationships with suppliers. Negotiate favorable terms and conditions, including pricing, payment terms, and delivery schedules. Also Resolve any supplier issues or disputes promptly. Ensure that procured materials and services meet project specifications and quality standards. Monitor and control procurement costs to ensure they align with project budgets. Identify cost-saving opportunities and implement strategies to reduce expenses. Identify and mitigate potential procurement risks, such as supplier delays, quality issues, or price fluctuations. Review and interpret Letter of Credit terms to ensure compliance with shipping documentation Arrange and coordinate import orders, including shipments, by collaborating with suppliers, shipping companies, and the logistics team. Honesty & Integrity - Uphold ethical practices in all procurement activities, ensuring transparency and fairness. Maintain confidentiality of sensitive information and protect the company’s image, resources, and data at all times.<br>Qualifications and Experience: Bachelor's degree in Civil Engineering Minimum 7-10 years of experience in procurement in the Interior Fit out industry. Knowledge of procurement processes, contract management, and supplier relationship management. Proficiency in using procurement software like oracle Excellent negotiation and communication skills. Ability to work under pressure and meet tight deadlines. Knowledge of local regulations and industry standards related to construction and interior fit out projects. Ability to read and understand technical drawings and specifications.

<p>1. Responsible for the full-cycle document management of the procurement process in EPC projects, including receipt, registration, numbering, distribution, archiving, and controlled management of all procurement documents, ensuring completeness, accuracy, and traceability. 2. Establish and maintain procurement document registers/trackers, including but not limited to: • Material Requisition MR • Request for Quotation RFQ • Invitation to Bid ITB • Technical / Commercial Bid Evaluation • Purchase Order PO • Vendor Document Register VDR • Vendor Data Requirement List VDRL • Inspection Documents • Shipping Documents • Final Vendor Dossier 3. Manage the full life cycle of vendor documentation, including receipt, review, distribution, expediting, and archiving of vendor-supplied drawings, technical specifications, data sheets, inspection records, quality certificates, manufacturing records, operation and maintenance manuals, and other related materials. 4. Track the submission status of vendor documents, update the Vendor Document Register (VDR) in a timely manner, and coordinate with procurement, engineering, quality, inspection, logistics, and other relevant departments to complete document review and approval processes in accordance with project schedules. 5. Prepare and manage Document Transmitals, ensuring that all internal and external document transmissions are timely, accurate, and properly controlled. 6. Implement and maintain procurement document revision control, ensuring that all stakeholders are working with the latest approved versions, thereby mitigating procurement and execution risks caused by version discrepancies. 7. Establish and maintain procurement document control trackers and statistical reports, covering document status, vendor submission rates, overdue document statistics, approval progress, etc., to provide data-driven support for project management. 8. Organize and manage procurement file archiving and project handover documentation, including the compilation, organization, and transfer of procurement records, Final Vendor Dossiers, Manufacturing Record Books (MRB), and other deliverable documentation for project close-out. 9. Upload, maintain, and update procurement-related documents in the Electronic Document Management System (EDMS), ensuring data integrity and completeness. 10. Support the Procurement Manager and project team in procurement audits, quality system audits, and project completion documentation reviews as required. 11. Perform other procurement document control duties as assigned by the department.</p><p>1. Bachelor’s degree or above, preferably in Archives Management, Engineering Management, Logistics Management, International Trade, Mechanical Engineering, Materials Engineering, Petroleum Engineering, or related disciplines. 2. Work Experience: 2.1. At least 3 years of experience in document control or procurement document control for EPC engineering projects. 2.2 Experience in EPC projects within the oil & gas, refining & petrochemical, chemical, power, LNG, or offshore engineering sectors is preferred. 2.3 Experience in overseas EPC projects or international engineering projects is preferred. 2.4 Familiar with vendor document management and full-cycle procurement documentation processes. 3. Professional Competencies: 3.1 Familiar with EPC project procurement management workflows and vendor documentation requirements. 3.2 Familiar with procurement document coding systems, document control procedures, and archival management standards. 3.3 Familiar with Vendor Data management processes, including VDR, VDRL, MRB, Final Vendor Dossier, and related documentation. 3.4 Understanding of the interface and interrelationship among procurement documents, quality documents, inspection documents, and logistics documents. 4. Language Proficiency: Good English reading and writing skills, with the ability to read procurement contracts, technical documents, and vendor materials, and to draft emails, Document Transmitals, and various procurement document control trackers in English. 5. Core Competencies: 5.1 Meticulous, detail-oriented, with strong sense of responsibility, document management awareness, and confidentiality. 5.2 Excellent communication and coordination skills, capable of effective collaboration with procurement, engineering, quality, inspection, logistics, and vendors. 5.3 Strong execution, planning, and time management skills, with the ability to meet project milestone deadlines. 5.4 Able to work under pressure and manage multiple projects and multiple vendors' documentation simultaneously.</p>

<p>1. Responsible for the full-cycle document management of the procurement process in EPC projects, including receipt, registration, numbering, distribution, archiving, and controlled management of all procurement documents, ensuring completeness, accuracy, and traceability. 2. Establish and maintain procurement document registers/trackers, including but not limited to: • Material Requisition MR • Request for Quotation RFQ • Invitation to Bid ITB • Technical / Commercial Bid Evaluation • Purchase Order PO • Vendor Document Register VDR • Vendor Data Requirement List VDRL • Inspection Documents • Shipping Documents • Final Vendor Dossier 3. Manage the full life cycle of vendor documentation, including receipt, review, distribution, expediting, and archiving of vendor-supplied drawings, technical specifications, data sheets, inspection records, quality certificates, manufacturing records, operation and maintenance manuals, and other related materials. 4. Track the submission status of vendor documents, update the Vendor Document Register (VDR) in a timely manner, and coordinate with procurement, engineering, quality, inspection, logistics, and other relevant departments to complete document review and approval processes in accordance with project schedules. 5. Prepare and manage Document Transmitals, ensuring that all internal and external document transmissions are timely, accurate, and properly controlled. 6. Implement and maintain procurement document revision control, ensuring that all stakeholders are working with the latest approved versions, thereby mitigating procurement and execution risks caused by version discrepancies. 7. Establish and maintain procurement document control trackers and statistical reports, covering document status, vendor submission rates, overdue document statistics, approval progress, etc., to provide data-driven support for project management. 8. Organize and manage procurement file archiving and project handover documentation, including the compilation, organization, and transfer of procurement records, Final Vendor Dossiers, Manufacturing Record Books (MRB), and other deliverable documentation for project close-out. 9. Upload, maintain, and update procurement-related documents in the Electronic Document Management System (EDMS), ensuring data integrity and completeness. 10. Support the Procurement Manager and project team in procurement audits, quality system audits, and project completion documentation reviews as required. 11. Perform other procurement document control duties as assigned by the department.</p><p>1. Bachelor’s degree or above, preferably in Archives Management, Engineering Management, Logistics Management, International Trade, Mechanical Engineering, Materials Engineering, Petroleum Engineering, or related disciplines. 2. Work Experience: 2.1. At least 3 years of experience in document control or procurement document control for EPC engineering projects. 2.2 Experience in EPC projects within the oil & gas, refining & petrochemical, chemical, power, LNG, or offshore engineering sectors is preferred. 2.3 Experience in overseas EPC projects or international engineering projects is preferred. 2.4 Familiar with vendor document management and full-cycle procurement documentation processes. 3. Professional Competencies: 3.1 Familiar with EPC project procurement management workflows and vendor documentation requirements. 3.2 Familiar with procurement document coding systems, document control procedures, and archival management standards. 3.3 Familiar with Vendor Data management processes, including VDR, VDRL, MRB, Final Vendor Dossier, and related documentation. 3.4 Understanding of the interface and interrelationship among procurement documents, quality documents, inspection documents, and logistics documents. 4. Language Proficiency: Good English reading and writing skills, with the ability to read procurement contracts, technical documents, and vendor materials, and to draft emails, Document Transmitals, and various procurement document control trackers in English. 5. Core Competencies: 5.1 Meticulous, detail-oriented, with strong sense of responsibility, document management awareness, and confidentiality. 5.2 Excellent communication and coordination skills, capable of effective collaboration with procurement, engineering, quality, inspection, logistics, and vendors. 5.3 Strong execution, planning, and time management skills, with the ability to meet project milestone deadlines. 5.4 Able to work under pressure and manage multiple projects and multiple vendors' documentation simultaneously.</p>