Mechanical Engineering Jobs in UAE

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and review lifting plans and lifting method statements for routine and critical lifts. </p></li><li><p>Calculate crane capacities, load weights, load distribution, and lifting configurations. </p></li><li><p>Select appropriate lifting equipment, cranes, and rigging gear based on operational requirements.</p></li><li><p>Ensure all lifting operations comply with relevant safety standards, regulations, and company procedures. <br>Conduct site inspections to assess lifting conditions, ground bearing capacity, and potential hazards. </p></li><li><p>Coordinate with project managers, supervisors, crane operators, riggers, and safety personnel before and during lifting activities. </p></li><li><p>Verify that lifting equipment and accessories have valid inspection and certification records.</p></li><li><p>Provide technical guidance during complex and critical lifting operations. </p></li><li><p>Participate in risk assessments, toolbox talks, and pre-lift meetings. </p></li><li><p>Investigate lifting-related incidents and recommend corrective and preventive actions. </p></li><li><p>Maintain accurate documentation of lifting plans, inspections, and operational records. </p></li><li><p>Ensure compliance with client specifications and project quality requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in mechanical engineering, Civil Engineering, or a related engineering discipline.</p></li><li><p>Professional certification in lifting operations is preferred (e.g., Lifting Equipment Engineers Association certification or equivalent). </p></li><li><p>Valid engineering registration or license, where applicable. 5–8 years of experience in lifting engineering, crane operations, or heavy lifting projects. </p></li><li><p>Experience in construction, oil &amp; gas, infrastructure, or industrial projects. Proven experience in preparing lifting studies and critical lift plans. </p></li><li><p>Strong knowledge of crane load charts and lifting calculations. Familiarity with international lifting standards and safety regulations.</p></li><li><p>Excellent problem-solving and analytical skills. Strong communication and coordination abilities.</p></li><li><p>Proficiency in engineering software and Microsoft Office. </p></li><li><p>Ability to work under pressure and manage multiple lifting activities simultaneously. Lifting Equipment Engineers Association certification. </p></li><li><p>Appointed Person for Lifting Operations (where applicable). Relevant HSE certifications such as Working at Height, Rigging, or Crane Safety. </p></li><li><p>First Aid and Fire Safety certifications (preferred)</p></li></ul><p></p></section>

<p>A Gen Power Shift based in Ajman, UAE, is looking for an experienced Diesel Mechanic to join our team. The ideal candidate will be responsible for the complete overhauling, repair, and maintenance of diesel engines, with strong hands-on experience on Caterpillar,Cummins,Detroit Diesel engines.</p><p><strong>Desired Candidate Profile</strong></p><p>Perform complete overhauling, diagnosis, and repair of Caterpillar,cummins,Detroit Diesel engines • Carry out engine disassembly, inspection, machining coordination, reassembly, and testing • Troubleshoot mechanical issues on diesel engines used in power generation, heavy equipment, and industrial applications • Maintain accurate records of work performed and parts used • Ensure all work meets quality and safety standards • Support workshop operations related to engine and powertrain systems Requirements: • Minimum 2–5 years of proven experience as a Diesel Mechanic • Strong hands-on experience in overhauling Caterpillar engines (C15, C18 etc.) • Strong hands-on experience in overhauling Detroit Diesel engines • Ability to work independently and as part of a team • Good knowledge of workshop tools, measuring instruments, and engine testing procedures • Ability to read technical manuals and parts catalogues • Valid UAE driving licence (preferred) • Immediate joiners preferred </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>The Technical Engineer – HVAC provides technical engineering leadership for HVAC and refrigeration systems across marine and offshore vessels. The role ensures effective execution of preventive, predictive, proactive maintenance, supports troubleshooting and system performance optimization, ensures compliance with company procedures, engineering standards, classification requirements, manufacturer recommendations, and HSE regulations. The position also supports technical evaluations, spare parts planning, commissioning, inspections, documentation, and continuous improvement initiatives to enhance equipment reliability and operational continuity.</span></p><br><br><p>DEVELOP YOUR CAREER WITH INDUSTRY LEADERS</p><br><p>NMDC Group is always looking for talented individuals to join our team. We know that our people are fundamental to our success as a business, which is why we support their career development and personal wellbeing in every way we can.</p><br><p>NMDC Group offers an environment where every employee can thrive and reach their professional potential. Nothing is more important to us than ensuring every employee feels valued and respected in their roles, and able to progress in their career through training, mentorship, and educational opportunities.</p><br><p>With a wide range of attractive employee benefits and competitive salaries, we have created a workplace defined by its culture, and made by its people. If you have a passion for EPC and marine construction and want to work on some of the region’s most exciting projects, find your next challenge with us.</p><br><br>Responsibilities:<br><ul><li><span>Lead HVAC and refrigeration maintenance, troubleshooting, repair, installation, and commissioning activities.&nbsp;</span></li><li><span>Manage preventive, predictive, and corrective maintenance programs.&nbsp;</span></li><li><span>Review drawings, specifications, schematics, and technical documentation.&nbsp;</span></li><li><span>Diagnose technical failures and recommend engineering solutions.&nbsp;</span></li><li><span>Coordinate with workshop teams, OEMs, contractors, vendors, fleet, logistics, and project teams.&nbsp;</span></li><li><span>Support procurement, spare parts planning, inspections, testing, and performance reporting.&nbsp;</span></li><li><span>Ensure compliance with company procedures, engineering standards, regulatory requirements, and HSE rules.&nbsp;</span></li></ul><br>Qualifications:<br><ul><li><span>Bachelor’s degree in Mechanical/Electrical Engineering.</span></li><li><span>Minimum 6 years of experience in HVAC maintenance, design, and electrical control systems.&nbsp;</span></li><li><span>Marine, offshore support vessel, dredging vessel, or similar industry experience preferred.&nbsp;</span></li><li><span>Strong knowledge of HVAC/refrigeration systems, electrical controls, PLCs, automation, drawings, P&amp;IDs, and commissioning.&nbsp;</span></li><li><span>Strong leadership, troubleshooting, planning, communication, and HSE awareness.</span></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Lead the design and engineering of complete electrical systems including power distribution, lighting, low voltage systems, emergency power (generators &amp; UPS), fire alarm, earthing, and lightning protection.</p></li><li><p>Prepare detailed electrical drawings, single-line diagrams, load calculations, cable schedules, and specifications using AutoCAD, Revit, Dialux, and ETAP.</p></li><li><p>Perform electrical load analysis, voltage drop calculations, short circuit studies, and coordination studies.</p></li><li><p>Coordinate with Mechanical, Plumbing, and other disciplines to ensure clash-free MEP designs (BIM coordination).</p></li><li><p>Review shop drawings, material submittals, and technical proposals from contractors/vendors.</p></li><li><p>Provide technical support during tendering, construction, and commissioning phases.</p></li><li><p>Ensure all designs comply with local and international standards (IEC, NEC, NFPA, local authority regulations, etc.).</p></li><li><p>Conduct site inspections, attend technical meetings with clients, consultants, and contractors.</p></li><li><p>Mentor junior engineers and guide the electrical design team on complex projects.</p></li><li><p>Value engineering and optimization of electrical systems for cost and energy efficiency.</p></li><li><p>Prepare BOQ, cost estimates, and technical reports.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Education: Bachelor’s Degree in Electrical Engineering (Master’s degree is a plus).</p></li><li><p>Experience: Minimum 8–12 years of relevant experience in MEP consulting, contracting, or design firms. At least 3–4 years in a senior/lead role.</p></li><li><p>Proven track record in large-scale projects (high-rise, hotels, hospitals, malls, data centers, or industrial facilities preferred).</p></li><li><p>Strong knowledge of MEP coordination and BIM workflows (Revit/Navisworks).</p></li><li><p>Experience with power system analysis software (ETAP, EPLAN, or similar).</p></li><li><p>In-depth knowledge of local codes and international standards.</p></li></ol><p></p></section>

About Us:We are a leading real estate development company, recognized for delivering exceptional projects globally and setting new benchmarks in the industry.<br>Key Responsibilities:Review and assess contractors’ baseline schedules, updates, and recovery programs. Monitor project progress against approved milestones and contractual requirements. Prepare monthly progress reports for the authorities and master developers Prepare and conduct presentations for the management Review of the reports from the contractors Support delay analysis and Extension of Time (EOT) assessments. Coordinate with consultants, contractors, and internal stakeholders.<br>Qualifications & Experience:Bachelor’s degree in civil engineering, Architectural Engineering, Mechanical/Electrical Engineering Experience: 5+ years in construction, preferred with developer or consultant in UAEProficiency in Primavera P6 and Microsoft Excel. Strong understanding of project scheduling, project controls, and construction methodologies. Experience in high-rise residential, and large-scale developments. Strong reporting, analytical, and communication skills.<br>What We Offer:Competitive salary and commission-based incentives. A dynamic and professional work environment. Career growth opportunities in a leading real estate firm.<br>If you have the required experience and skills, and you're ready to take on a challenging yet rewarding role, we’d love to hear from you!<br>How to Apply:Send your resume to Talent@reportageuae.com

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Implement quality assurance/quality control management system at vendor/subcontractor site as per approved project quality plan; Inspection and test plans &amp; relevant project specifications. </p></li><li><p>Review of material requisitions, Technical clarifications from vendors and support project team on quality matters. </p></li><li><p>Review &amp; approve of vendor related quality documents (ITP, NDE/Test procedures, quality plans etc). </p></li><li><p>Witness inspections/tests as per approved procedures and inspection plan at vendor works. </p></li><li><p>Coordinate with TPI/client/vendors/subcontractors to schedule inspections and review reports for compliance with respective purchase orders.</p></li><li><p>Follow-up and report status of inspections &amp; testing activities to project team on weekly &amp; monthly basis. </p></li><li><p>Participate in weekly/monthly meetings and respond/resolve any quality related issues. </p></li><li><p>In the role of lead/internal auditor perform audits and issue reports as per the audit schedule. </p></li><li><p>As required develop project specific check lists for jobs to be executed. </p></li><li><p>Track and expedite deliverables from sub-contractor/vendors. </p></li><li><p>Participate in resolution of quality issues and manage all Non-conforming reports.</p></li><li><p>Ability to review and evaluate inspection reports technically in accordance to code/client requirements. </p></li><li><p>Ensure inspection &amp; test reports are maintained and progressively compiled in Manufacturers Record Book (MRB). </p></li><li><p>Review &amp; approve Manufacturers Record Books from Sub-contractors/Vendors. </p></li><li><p>Assist DCC in preparation of Final Manufacturers Record Book for the project.</p></li><li><p>Consistently adhere to the Project Objectives and Priorities, Safety, Regulatory / Environmental, Quality and Schedule expectations. </p></li><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualification: </strong></p><ul><li><p>Minimum – Diploma or Bachelor’s degree in Mechanical Engineering. Certifications: </p></li><li><p>AWS-CWI/SCWI or CSWIP 3.1/3.2 </p></li><li><p>ASNT Level-II/III NDT Methods RT, UT, PT, MT </p></li><li><p>ISO 9001-2015-internal/lead auditor </p></li><li><p>Bgas / NACE – Coating inspections (Preferred) </p></li></ul><p><strong>Knowledge: </strong></p><ul><li><p>Proficient on various components-pressure vessels, heat exchangers, valves, pumps and other packaged items. Well versed in Welding process &amp; Techniques; MTC review; NDT-RT, UT, PT, MT, VT; Surface Preparation &amp; Painting Inspections; Pre-commissioning activities; proficient in construction codes &amp; standards ASME, ASTM, AWS, BS, EEMUA, etc. </p></li></ul><p><strong>Experience: </strong></p><ul><li><p>Minimum 12 years of experience as QAQC coordinator/ Engineer on EPC projects within Oil and Gas Industry Skills: </p></li><li><p>Strong analytical skills and problem solving abilities. </p></li><li><p>Strong administrative and organizational skills </p></li><li><p>The job role includes travel(UAE &amp; International), candidate with valid UAE Driving License is mandatory. </p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview:</b> <br><br><br><br><br><p><span><span>Analog is looking for an exceptional Principal Robotics Research Engineer to join our core robotics team. In this role, you will help setting the technical direction for our robotic systems research — spanning perception, state estimation, motion planning, and control — and translate fundamental advances into production-grade capabilities deployed on real hardware. You will act as a force-multiplier for the broader engineering organisation, driving both the science and the systems that bring intelligent robots to life.</span> </span></p><br><br><b>Responsibilities:</b> <br>Research Leadership &amp; Technical Direction<ul><li><p>Identify breakthrough opportunities across the robotics stack and emerging AI paradigms.</p><br><br></li><li><p>Translate research insights into impactful and feasible product roadmap initiatives.</p><br><br></li><li><p>Publish at leading conferences including ICRA, IROS, RSS, and CoRL, while driving patent innovation.</p><br><br></li></ul>Perception &amp; AI<ul><li><p>Architect multi-modal perception systems integrating vision, LiDAR, radar, depth, and acoustic sensing.</p><br><br></li><li><p>Lead research in 3D scene understanding, tracking, segmentation, and open-vocabulary recognition.</p><br><br></li><li><p>Develop foundation models and real-time AI architectures for robotic perception.</p><br><br></li></ul>State Estimation &amp; Sensor Fusion<ul><li><p>Design robust SLAM, visual-inertial odometry, and GPS/GNSS fusion systems.</p><br><br></li><li><p>Advance probabilistic and learning-based sensor fusion for resilient localisation.</p><br><br></li><li><p>Oversee calibration, synchronisation, validation, and benchmarking frameworks.</p><br><br></li></ul>Motion Planning &amp; Control<ul><li><p>Build planning frameworks for dynamic and unstructured environments.</p><br><br></li><li><p>Lead MPC, reinforcement learning, imitation learning, and safety-critical control research.</p><br><br></li><li><p>Drive trajectory optimisation and whole-body robotic motion generation.</p><br><br></li></ul>System Integration &amp; Deployment<ul><li><p>Own end-to-end integration of perception, planning, estimation, and control systems.</p><br><br></li><li><p>Establish engineering standards for latency, determinism, and fault tolerance.</p><br><br></li><li><p>Lead simulation, hardware-in-the-loop testing, and deployment optimisation for onboard compute systems.</p><br><br></li></ul><br><b>Qualifications:</b> <br><p>• PhD in Robotics Computer Science Electrical or Mechanical Engineering or equivalent research experience<br>• 10 plus years of robotics research and engineering across perception estimation planning or control<br>• Strong expertise in C plus plus Python ROS and ROS2 with real time safety critical systems experience<br>• Proven leadership managing high performing engineering or research teams<br>• Experience taking robotics solutions from prototype to field deployment<br>• Strong communication skills across technical product and executive stakeholders<br>• Experience with PyTorch TensorFlow JAX GPU compute and simulation platforms including Isaac Sim Gazebo and MuJoCo</p><br><br><br> </div>

Job Title: BMS Application Engineer<br><br>Primary Location: UTS Carrier, Palladium Building, 2nd Floor, Al Quoz, Dubai, UAE<br><br>Work Arrangement: Onsite<br><br>Role Purpose<br><br>The Application Engineer is responsible for supporting the pre-sales and sales process for Controls, Building Automation Systems (BAS), and Chiller Plant Manager (CPM) solutions. The role focuses on developing technical solutions, preparing quotations, estimations, technical submittals, and project documentation while ensuring alignment with customer requirements, project specifications, Carrier standards, and quality expectations.<br><br>The role works closely with Sales, Application, Operations, Project teams, consultants, contractors, and customers to deliver optimized solutions that meet technical requirements, project budgets, and business objectives.<br><br>Key Responsibilities<br><br>Review project documentation, including equipment shop drawings, mechanical plans, specifications, and tender documents to identify technical requirements, compatibility issues, and design discrepancies. Read, understand, and interpret MEP drawings and project specifications. Perform quantity take-offs from tender drawings, RFQs, and project documentation. Prepare Input/Output (I/O) lists, including controller and sensor selection based on customer design standards. Develop technical submittals, including:Data Point Schedules Control Schematics Sequence of Operations Project Schedules Technical documentation for various control solutions Prepare quotations, cost estimations, and technical proposals in coordination with Sales Engineers. Support Sales teams throughout the pre-sales process by providing technical expertise and solution recommendations. Review project requirements and develop optimized solutions through value engineering to meet customer budgets. Ensure compliance with project specifications, customer requirements, and technical standards. Coordinate with third-party suppliers to obtain updated pricing and technical information. Ensure all opportunities and quotations are created and maintained through CRM/SAP systems. Maintain accurate records of inquiries, quotations, project status, and customer updates. Follow up with contractors and customers regarding project progress and update CRM/SAP accordingly. Assist in defining project scope with customers and consultants. Develop sequences of operations based on HVAC/BAS principles and project design requirements. Prepare Operation & Maintenance (O&M) manuals for supplied systems, equipment, and devices. Coordinate technical requirements with Application, Sales, and Operations teams. Create Controls/BMS documentation using VISIO and Auto CAD. Attend internal and external meetings with Sales, Project teams, contractors, consultants, and customers. Participate in Bid/No Bid review meetings. Maintain daily activity records and provide updates during weekly team meetings. Ensure compliance with Carrier Ethics & Compliance policies, EH&S requirements, Quality Management System, and approval processes.<br>Minimum Requirements<br><br>Bachelor’s degree in Engineering (Electrical, Mechanical, or Instrumentation).4–5 years of relevant experience in HVAC Controls, BAS, BMS, Chiller Plant Manager solutions, or similar industries. Strong technical knowledge of HVAC control systems and building automation solutions. Experience in application engineering, technical sales support, estimation, and project proposals. Knowledge of project specifications, tender processes, and technical documentation. Understanding of Total Quality Management, ISO processes, and procedures. Excellent communication and interpersonal skills. Strong analytical, negotiation, and problem-solving skills. Customer-focused mindset with strong teamwork capabilities. Proficiency in English; Arabic language skills are an advantage. Strong computer skills, including MS Office, Auto CAD, and VISIO. Experience working with ALC/Carrier products is an added advantage.<br><br>Key Competencies<br><br>Customer Focus Technical Expertise Analytical Thinking Problem Solving Collaboration & Teamwork Communication Skills Quality & Compliance Mindset Commercial Awareness<br><br>Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.<br><br>Job Applicant's Privacy Notice<br><br>Click on this link to read the Job Applicant's Privacy Notice

Job Title: BMS Application Engineer<br><br>Primary Location: UTS Carrier, Palladium Building, 2nd Floor, Al Quoz, Dubai, UAE<br><br>Work Arrangement: Onsite<br><br>Role Purpose<br><br>The Application Engineer is responsible for supporting the pre-sales and sales process for Controls, Building Automation Systems (BAS), and Chiller Plant Manager (CPM) solutions. The role focuses on developing technical solutions, preparing quotations, estimations, technical submittals, and project documentation while ensuring alignment with customer requirements, project specifications, Carrier standards, and quality expectations.<br><br>The role works closely with Sales, Application, Operations, Project teams, consultants, contractors, and customers to deliver optimized solutions that meet technical requirements, project budgets, and business objectives.<br><br>Key Responsibilities<br><br>Review project documentation, including equipment shop drawings, mechanical plans, specifications, and tender documents to identify technical requirements, compatibility issues, and design discrepancies. Read, understand, and interpret MEP drawings and project specifications. Perform quantity take-offs from tender drawings, RFQs, and project documentation. Prepare Input/Output (I/O) lists, including controller and sensor selection based on customer design standards. Develop technical submittals, including:Data Point Schedules Control Schematics Sequence of Operations Project Schedules Technical documentation for various control solutions Prepare quotations, cost estimations, and technical proposals in coordination with Sales Engineers. Support Sales teams throughout the pre-sales process by providing technical expertise and solution recommendations. Review project requirements and develop optimized solutions through value engineering to meet customer budgets. Ensure compliance with project specifications, customer requirements, and technical standards. Coordinate with third-party suppliers to obtain updated pricing and technical information. Ensure all opportunities and quotations are created and maintained through CRM/SAP systems. Maintain accurate records of inquiries, quotations, project status, and customer updates. Follow up with contractors and customers regarding project progress and update CRM/SAP accordingly. Assist in defining project scope with customers and consultants. Develop sequences of operations based on HVAC/BAS principles and project design requirements. Prepare Operation & Maintenance (O&M) manuals for supplied systems, equipment, and devices. Coordinate technical requirements with Application, Sales, and Operations teams. Create Controls/BMS documentation using VISIO and Auto CAD. Attend internal and external meetings with Sales, Project teams, contractors, consultants, and customers. Participate in Bid/No Bid review meetings. Maintain daily activity records and provide updates during weekly team meetings. Ensure compliance with Carrier Ethics & Compliance policies, EH&S requirements, Quality Management System, and approval processes.<br>Minimum Requirements<br><br>Bachelor’s degree in Engineering (Electrical, Mechanical, or Instrumentation).4–5 years of relevant experience in HVAC Controls, BAS, BMS, Chiller Plant Manager solutions, or similar industries. Strong technical knowledge of HVAC control systems and building automation solutions. Experience in application engineering, technical sales support, estimation, and project proposals. Knowledge of project specifications, tender processes, and technical documentation. Understanding of Total Quality Management, ISO processes, and procedures. Excellent communication and interpersonal skills. Strong analytical, negotiation, and problem-solving skills. Customer-focused mindset with strong teamwork capabilities. Proficiency in English; Arabic language skills are an advantage. Strong computer skills, including MS Office, Auto CAD, and VISIO. Experience working with ALC/Carrier products is an added advantage.<br><br>Key Competencies<br><br>Customer Focus Technical Expertise Analytical Thinking Problem Solving Collaboration & Teamwork Communication Skills Quality & Compliance Mindset Commercial Awareness<br><br>Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.<br><br>Job Applicant's Privacy Notice<br><br>Click on this link to read the Job Applicant's Privacy Notice

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.</span></p><br><br><p><strong><span>About Eaton</span></strong></p><br><br><p><span>Eaton is a power management company where we provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technology&nbsp;and services. Eaton has approximately 96,000 employees and sells products to customers in more than 175 countries.</span></p><br><br><br><p>The&nbsp;<strong>Technical Support Engineer - UPS&nbsp;</strong>will&nbsp;provide factory support to Eaton local Service teams. This role supports the full EMEA region but focuses on ME region UPS customers. It also provides service trainings to Eaton local Service Engineers and ASP’s (Authorized Service Partner) is part of the job. This role is in contact with Eaton local Service teams and ASP’s, not the end-customer directly.&nbsp;</p><br><br><br>What you’ll do: <br><ul><li>Diagnose and resolve technical issues with 3-Phase UPS systems</li><li>Provide expert technical support to local and regional field service engineers in their daily activities via remote tools and on-site visits</li><li>Manage and lead troubleshooting and take corrective actions in challenging field incidents</li><li>Assist FSEs and customers with the installation, configuration and start-up of UPS systems</li><li>Collaborate with the Engineering and AE team to address and resolve issues and report to Quality on field findings</li><li>Provide service trainings for FSEs and ASPs, including onsite, remote and eLearning trainings</li><li>Create and maintain a comprehensive technical documentation, field service bulletins and service guides</li><li>Participate in new product development projects as a voice of customer and provide field service perspective</li><li>Contribute to the zero-incident culture supporting safety of field engineers through instructions and training</li><li>Coordinate with the factory teams located in other countries (Finland &amp; China) for technical and product support" </li></ul><br>Qualifications: <br><ul><li>B.Sc. or&nbsp;M.Sc. in Electrical Engineering&nbsp;</li><li>2+ years of service experience in power electronics and/or experience in technical support role in three-phase power electronics. The role could be suited e.g. for a field service engineer (FSE)</li></ul><br>Skills: <br><ul><li>Experience in technical support or a similar role</li><li>Strong technical knowledge on power electronics and/or three phase electrical systems</li><li>Experience on UPS technologies is an advantage</li><li>Strong work ethic, Communication and interpersonal skills</li><li>Excellent problem-solving and troubleshooting skills</li><li>Ability to work independently and as part of a team</li><li>Customer-oriented</li><li>Focus on delivering high-quality support</li></ul><br>What We Offer: <br><ul><li>Being part of a company that has been in business for more than 100 years, is well known in the industry, and has a major impact on the energy industry</li><li>Work in a company that is commitment to Inclusion &amp; Diversity and Sustainability</li><li>Annual mentoring program, Eaton University, a reward, and recognition system</li><li>Ongoing Learning and Career Development Opportunities in a global company. Build your career and apply internally for our open positions worldwide</li><li>Strong, agile and diverse team locally and globally</li><li>Strong processes and state-of-the-art systems and tools</li><li>Structured employee development processes, open feedback culture with development plans</li><li>Detailed induction support and well-structured onboarding</li></ul><br><p><strong><span>Living and Working in Dubai: </span></strong></p><br><br><p><span>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.</span></p><br><br><p><span>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.</span></p><br><br><br><p><span><br>#LI-KK1</span></p><br><br><br><br><p><span>All positions may require participation in video and in-person interviews as part of the hiring process.&nbsp;All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws.&nbsp;</span></p><br><br><br><p><span>We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.</span></p><br><br><br> </div>

Job Description<br><br>Wood is currently recruiting for Specialist Engineer QA/QC under ADNOC Offshore US LTPD project.<br><br>Responsibilities<br><br>Job Objectives<br><br>Ensure the effective implementation and maintenance of quality assurance and quality control systems across projects and operations. Monitor compliance with project specifications, company standards, regulatory requirements, and industry best practices. Support the delivery of projects by promoting quality excellence, continuous improvement, and adherence to established quality management procedures. Identify quality risks, implement corrective and preventive actions, and ensure compliance throughout the project lifecycle. Coordinate with project teams, contractors, suppliers, and stakeholders to achieve quality objectives and customer satisfaction.<br><br>Key Responsibilities<br><br>Implement and monitor QA/QC processes, procedures, and quality management systems. Review and ensure compliance with project specifications, quality plans, inspection and test plans (ITPs), and applicable standards. Conduct quality audits, inspections, and surveillance activities to verify compliance with quality requirements. Monitor and track non-conformance reports (NCRs), corrective actions, and preventive actions. Review quality-related documents, technical submittals, inspection reports, and material certifications. Coordinate with project teams, contractors, and vendors to resolve quality issues and improve performance. Prepare quality reports, KPI dashboards, and management summaries. Support internal and external audits, client inspections, and regulatory reviews. Promote quality awareness, continuous improvement, and lessons learned initiatives. Ensure compliance with company quality standards, ISO requirements, and project quality objectives.<br><br>Qualifications<br><br> QUALIFICATIONS <br><br>Excellent written and verbal communication skills Excellent technical team and interpersonal skills Experience and detailed knowledge of relevant international codes and standards Knowledge of engineering computer programs and general business software Bachelor's Degree in Engineering, Quality Management, Industrial Engineering, Mechanical Engineering, Civil Engineering, Electrical Engineering, or a related discipline. Master's Degree in a relevant field is an advantage.<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Job Description<br><br>Wood is currently recruiting for Specialist Engineer QA/QC under ADNOC Offshore US LTPD project.<br><br>Responsibilities<br><br>Job Objectives<br><br>Ensure the effective implementation and maintenance of quality assurance and quality control systems across projects and operations. Monitor compliance with project specifications, company standards, regulatory requirements, and industry best practices. Support the delivery of projects by promoting quality excellence, continuous improvement, and adherence to established quality management procedures. Identify quality risks, implement corrective and preventive actions, and ensure compliance throughout the project lifecycle. Coordinate with project teams, contractors, suppliers, and stakeholders to achieve quality objectives and customer satisfaction.<br><br>Key Responsibilities<br><br>Implement and monitor QA/QC processes, procedures, and quality management systems. Review and ensure compliance with project specifications, quality plans, inspection and test plans (ITPs), and applicable standards. Conduct quality audits, inspections, and surveillance activities to verify compliance with quality requirements. Monitor and track non-conformance reports (NCRs), corrective actions, and preventive actions. Review quality-related documents, technical submittals, inspection reports, and material certifications. Coordinate with project teams, contractors, and vendors to resolve quality issues and improve performance. Prepare quality reports, KPI dashboards, and management summaries. Support internal and external audits, client inspections, and regulatory reviews. Promote quality awareness, continuous improvement, and lessons learned initiatives. Ensure compliance with company quality standards, ISO requirements, and project quality objectives.<br><br>Qualifications<br><br> QUALIFICATIONS <br><br>Excellent written and verbal communication skills Excellent technical team and interpersonal skills Experience and detailed knowledge of relevant international codes and standards Knowledge of engineering computer programs and general business software Bachelor's Degree in Engineering, Quality Management, Industrial Engineering, Mechanical Engineering, Civil Engineering, Electrical Engineering, or a related discipline. Master's Degree in a relevant field is an advantage.<br><br>About Us<br><br>Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br><br>Diversity Statement <br><br>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Draft, review, and negotiate complex construction and service contracts, ensuring alignment with project objectives and legal requirements.</li><li>Analyze contract terms, identify potential risks, and propose mitigation strategies to protect the company's interests.</li><li>Manage the entire contract lifecycle, from initial drafting and negotiation to execution, administration, and closeout.</li><li>Collaborate closely with project managers, legal teams, and procurement departments to ensure seamless contract execution.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Civil, Mechanical, Electrical) or a related technical field.</p></li><li><p>Minimum of 10 -12 years of hands-on experience in contract engineering, preferably within the construction or oil &amp; gas industry.</p></li><li><p>Proven ability to draft, negotiate, and manage various types of contracts (e.g., EPC, O&amp;M, supply agreements).</p></li><li><p>Strong understanding of contract law, risk management principles, and procurement processes.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Analyze project requirements and recommend suitable HVAC and air-conditioning solutions</p></li><li><p>Perform cooling load calculations, heat gain/loss analysis, and equipment sizing</p></li><li><p>Prepare technical submittals, layouts, and basic HVAC drawings (as required)</p></li><li><p>Support sales teams with technical presentations, product selection, and proposals</p></li><li><p>Coordinate with consultants, contractors, and internal teams on technical matters</p></li><li><p>Ensure compliance with project specifications, standards, and local HVAC codes</p></li><li><p>Assist with value engineering and optimization of system designs</p></li><li><p>Provide pre-sales and post-sales technical support for air-conditioning equipment</p></li><li><p>Review BOQs, specifications, and tender documents</p></li><li><p>Support commissioning, troubleshooting, and technical clarifications when required</p></li></ul><p>Stay updated on new HVAC technologies, energy efficiency standards, and products</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical Engineering or related field</p></li><li><p>5+&nbsp;years of experience in HVAC or air-conditioning application engineering</p></li><li><p>Strong knowledge of HVAC systems (DX, VRF/VRV, Chillers, AHUs, FCUs, ventilation systems)</p></li><li><p>Proficiency in cooling load calculation methods and HVAC design principles</p></li><li><p>Familiarity with AutoCAD and HVAC design tools (e.g., HAP, TRACE, or similar)</p></li><li><p>Understanding of ASHRAE standards and local HVAC codes</p></li><li><p>Good communication and presentation skills</p></li><li><p>Ability to work collaboratively with sales and project teams</p></li></ul><p><strong>Preferred Qualifications</strong></p><ul><li><p>Experience with residential, commercial, and light industrial HVAC projects</p></li><li><p>Knowledge of energy-efficient and green building solutions</p></li><li><p>Field or site experience with HVAC installations and commissioning</p></li><li><p>Experience working with OEMs or HVAC equipment suppliers</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Develop detailed piping designs, including layout, isometric drawings, and stress analysis, ensuring compliance with project specifications and industry codes.</li><li>Create and review P&amp;IDs (Piping and Instrumentation Diagrams) and PFDs (Process Flow Diagrams) to accurately represent process flow and equipment integration.</li><li>Perform hydraulic calculations and surge analysis to optimize piping system performance and prevent operational issues.</li><li>Specify piping materials, valves, and fittings, considering process conditions, corrosion resistance, and cost-effectiveness.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or equivalent, demonstrating a strong foundation in engineering principles.</p></li><li><p>Minimum of 13 years of hands-on experience in piping design and engineering, preferably within the oil &amp; gas, petrochemical, or power sectors.</p></li><li><p>Proficiency in piping design software like AutoCAD, PDMS, or E3D, enabling efficient and accurate drawing creation.</p></li><li><p>Solid understanding of international piping codes and standards (e.g., ASME B1, B3, API, TEMA).</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>· Manage construction projects from award to handover. · Review IFC drawings, specifications, and contract documents. · Prepare execution plans and construction methodology. · Coordinate with clients, consultants, subcontractors, and suppliers. · Monitor project schedule, cost, and quality targets. · Ensure work complies with project specifications and standards. · Track procurement and material delivery status. · Review shop drawings and technical submittals. · Conduct site inspections and resolve technical issues. · Manage manpower, equipment, and subcontractor performance. · Prepare daily, weekly, and monthly progress reports. · Attend coordination and progress meetings. · Monitor project risks and implement mitigation plans. · Support commercial team with variations and claims. · Ensure HSE compliance across project activities. · Coordinate testing, inspections, and handover documentation. · Close punch list items before project completion. · Maintain project records and document control. · Support project manager in achieving project objectives. · Drive continuous improvement and productivity.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>· Bachelor's Degree in Civil/Mechanical Engineering. · 4–8+ years of construction experience. · Steel Structure/PEB experience preferred. · Knowledge of AutoCAD, MS Project/Primavera P6. · Strong communication and leadership skills. · Valid UAE/KSA driving license preferred.</p></li></ul><br><p>Key Skills · Project Management · Construction Management · Structural Steel · PEB · Industrial Construction · AutoCAD · Primavera P6 · MS Project · MS Office · Planning · Scheduling · Team Leadership · Problem Solving · Communication · Quality Control · Safety Management · Reporting · Technical Coordination · Time Management · Documentation</p><br><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Promote and sell Passive Fire Protection products including fire stopping systems, fireproofing solutions, fire-rated sealants, boards, coatings, wraps, and related products.</p></li><li><p>Identify and develop new business opportunities across commercial, industrial, and infrastructure projects.</p></li><li><p>Build and maintain strong relationships with consultants, contractors, developers, architects, and key decision-makers.</p></li><li><p>Conduct technical presentations, product demonstrations, and site visits to support project specifications.</p></li><li><p>Prepare technical proposals, quotations, and tender submissions based on client requirements.</p></li><li><p>Coordinate with estimation, engineering, procurement, and project teams to ensure successful project execution.</p></li><li><p>Provide technical support on product selection, application methods, and compliance with fire safety standards.</p></li><li><p>Monitor project pipelines, competitor activities, and market trends to identify new business opportunities.</p></li><li><p>Achieve assigned sales targets while maintaining high levels of customer satisfaction.</p></li><li><p>Maintain accurate records of sales activities, quotations, and customer interactions using CRM/ERP systems.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Mechanical, Civil, Electrical Engineering, or a related discipline.</p></li><li><p>Minimum 2–5 years of UAE/GCC experience in Passive Fire Protection, Fire Stopping, Fireproofing, or related construction products.</p></li><li><p>Strong understanding of passive fire protection systems and applicable UAE Fire &amp; Life Safety Code.</p></li><li><p>Experience working with consultants, contractors, and major construction projects.</p></li><li><p>Excellent communication, presentation, negotiation, and relationship management skills.</p></li><li><p>Proficiency in MS Office and CRM/ERP systems.<br></p></li></ul><br><p></p></section>

Company Description<br><br>Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions. Always oriented towards technological innovation, the company’s purpose is “Engineering for a sustainable future”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than 50 countries around the world and employs about 30,000 people of over 130 nationalities.<br><br>Project: NFPS2<br><br>Job Title: Mechanical Completion Engineer<br><br>Location: <br><br>Qingdao, China<br><br>Job Description<br><br>Mission<br><br> Coordinate and supervise the mechanical completion, interfacing with other functions, defining and managing related documentation<br><br>Tasks<br><br> Review contractual documentation, for mechanical completion related issue and identifies the project requirements & constraints, and participate to project review meetings Verify that the mechanical completion requirements ar e accounted for into engineering documents Take part in project planning & scheduling Prepare and keep up-to-date the mechanical completion execution plans (including the mobilization of personnel) Supervise / coordinate th e preparation of the test pack (mechanical completion dossier) as per contractual requirements Supervise / coordinate the preparation of the Mechanical Completion procedure, definitions of the mechanical completion philosophy and preparation of all checklists and relevant check sheets; submit the procedure and check sheets to Company for approval Manage the Mechanical Completion software, verifying that all itemization data are complete Verify that check data form are coherent with identified items Ensure the interfaces with the Construction/Fabrication team and assist it as needed Participate to the preparation of the HSE Plan for Mechanical Completion Activities Define the specific temporary logistic required complying with the project scope of work, elaborate tools and method of control Take part in the project review meetings to make sure that the Mechanical completion requirements have been duly complied with Define and review mechanical completion consumables and materials Ensure the preparation and checking of the Purchase Requisitions (PR) and Technical Evaluation falling within his sphere of responsibility Assist during the definition of subcontractor scope of works if required Check the conformity and congruence of technical documentation received fr om Head Office Engineering and / or Client and shop drawings issued by yard Production Engineering and Methods function Ensure interface with vendor's representatives together with relevant Engineers / Superintendents Supervise / coodinate the inspection, checking and testing in order to assure the completeness and quality of the fabrication in accordance with design documentation and specifications, company standards and vendor’s instructions Supervise / review the mechanical completion dossier, submit to Company for review and certification Contribute, in collaboration with Yard Prod. Eng. Project Coordinator, to back charge notifications to vendors, for his sphere of responsibility Plan punch list activities and related workforce to accomplish it Manage and categorize punch list in coordination with other functions (engineering/construction/Client/quality/hookup/pre-commissioning/commissioning) Ensure that all the corrective actions to close the punch list are performed<br><br>What are we looking for?<br><br>Languages: English Language skills required<br><br>Technical Knowledge: offshore platforms fabrication<br><br>What We Can Offer To You<br><br>6 months contract re newable Corporate Benefits: We offer a comprehensive benefits package, including health insurance. Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.<br><br>Additional Information<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. As an Equal Opportunity Employer, we stand against discrimination based on gender identity, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of SAIPEM companies unique.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our career page: https://gps.ncorehr.com/

About Us<br><br>Are you ready to shape how cutting-edge technologies are positioned, understood, and adopted by real markets? At Venture One, we build ventures and commercialize breakthrough technologies emerging from advanced research. Our focus spans Aerospace and Space, Security and Defense, Sustainability, Environment and Energy, and Transportation, with technologies across Cryptography, Secure Systems, Directed Energy, Advanced Materials, Autonomous Systems, and more.<br><br>About The Role<br><br>We are looking for a Mechanical Engineer to lead the end-to-end development and qualification of lights-out (fully autonomous) assembly and testing lines for aerospace and defense systems. The role combines design & validation of advanced automation parts, Robotic & IIoT-enabled manufacturing, and digital twin-driven optimization to deliver zero-defect, high-efficiency production systems. You will act as a technical authority for mechanical engineering across assembly processes, system integration, and production performance.<br><br>Key Responsibilities<br><br>Lead design validation and industrialization of complex mechanical assemblies, ensuring DFMEA/DFM/DFA, GD&T compliance, and robustness for automated production. Architect and deploy lights-out assembly lines with robotics, automated handling, and end-of-line (EOL) test systems. Develop and optimize assembly processes including:Precision tightening systems (torque/angle control, error-proofing) Controlled dispensing systems (adhesives, sealants, potting) Pressing/forming operations (force-displacement monitoring) Automated welding processes (laser, spot, arc—based on application) Automated Painting and Surface Treatment process Architect and implement multi-layer Poka-Yoke systems to ensure zero-defect production: Sensor-based validation (presence/absence, orientation, alignment) Define and achieve production KPIs: cycle time, throughput, line balancing, and automation percentage. Design and integrate Automatic Tool Changer (ATC) systems for robotic and CNC-assisted assembly operations. Selection of Conveyor, Robots, Servo Press, Indexing table and assembly process equipment. Lead full line qualification (FAT, SAT, IQ/OQ/PQ) and ensure compliance with aerospace standards (AS9100, NADCAP where applicable). Establish robust traceability systems (part-level serialization, process parameter tracking, genealogy tracking). Design and validate test benches, ensuring calibration, repeatability, and compliance with aerospace testing requirements. Drive OEE improvement initiatives, including availability, performance, and quality optimization. Develop and implement maintenance strategies (predictive, preventive, condition-based) to maximize uptime and reliability. Integrate ergonomic considerations for hybrid/manual stations, ensuring operator safety, efficiency, and compliance. Lead root cause analysis (RCA) and continuous improvement using Lean, Six Sigma, and data-driven tools. Collaborate with cross-functional teams & External Partners/OEMs (automation, controls, quality, supply chain, digital engineering). Implement IIoT-enabled manufacturing systems for real-time data acquisition, machine connectivity, and performance monitoring. Build and utilize Digital Twin / Process Twin models to simulate, validate, and optimize line performance, cycle time, and layout. <br>Minimum Qualifications<br><br>Bachelor’s or Master’s degree in Mechanical Engineering or related discipline. 10+ years of experience in automated assembly and testing systems, preferably in aerospace, defense, or high-precision manufacturing. Strong hands-on expertise in assembly processes: tightening, dispensing, pressing, and welding. Experience with IIoT systems, machine connectivity, and industrial data acquisition. Proven experience in design validation, tolerance stack-up, and production industrialization. Experience in line qualification (FAT, SAT, IQ/OQ/PQ) and process capability validation. Strong understanding of OEE, cycle time optimization, and line balancing techniques. Experience with test systems validation, calibration methods, and MSA (Measurement System Analysis). Familiarity with aerospace quality standards (AS9100, ISO, NADCAP). <br><br>Preferred Qualifications<br><br>3D and 2D cad experience and strong customer drawing reading and analyzing experience and assembly stack up tolerance detail. Knowledge of assembly operation in Indexing/Turn table, Conveyor pallets, Magne motion system and AMR/AGV Experience with traceability systems and MES integration. Strong background in predictive maintenance and reliability engineering (MTBF/MTTR). Exposure to human factors engineering and ergonomics design standards. Experience working in lights-out / dark factory environments. Experience in Digital Twin / simulation platforms (e.g., Visual Components, Process Twin). Strong analytical and problem-solving skills Attention to detail and quality-driven mindset Ability to lead cross-functional technical initiatives Effective communication and training capabilities <br><br>How To Apply<br><br>Are you ready to embark on an exciting journey with Venture One? If you're a visionary with a passion for innovation, we want to hear from you. To apply, please send your resume detailing your relevant experience and why you're the perfect fit for this role.<br><br>At Venture One, we believe that diverse perspectives drive innovation. We are committed to creating an inclusive and equal opportunity workplace. All qualified applicants will receive equal consideration for employment. Join us in shaping the future of business. Apply today and let's venture into a world of possibilities together!

About Us<br><br>Are you ready to shape how cutting-edge technologies are positioned, understood, and adopted by real markets? At Venture One, we build ventures and commercialize breakthrough technologies emerging from advanced research. Our focus spans Aerospace and Space, Security and Defense, Sustainability, Environment and Energy, and Transportation, with technologies across Cryptography, Secure Systems, Directed Energy, Advanced Materials, Autonomous Systems, and more.<br><br>About The Role<br><br>We are looking for a Mechanical Engineer to lead the end-to-end development and qualification of lights-out (fully autonomous) assembly and testing lines for aerospace and defense systems. The role combines design & validation of advanced automation parts, Robotic & IIoT-enabled manufacturing, and digital twin-driven optimization to deliver zero-defect, high-efficiency production systems. You will act as a technical authority for mechanical engineering across assembly processes, system integration, and production performance.<br><br>Key Responsibilities<br><br>Lead design validation and industrialization of complex mechanical assemblies, ensuring DFMEA/DFM/DFA, GD&T compliance, and robustness for automated production. Architect and deploy lights-out assembly lines with robotics, automated handling, and end-of-line (EOL) test systems. Develop and optimize assembly processes including:Precision tightening systems (torque/angle control, error-proofing) Controlled dispensing systems (adhesives, sealants, potting) Pressing/forming operations (force-displacement monitoring) Automated welding processes (laser, spot, arc—based on application) Automated Painting and Surface Treatment process Architect and implement multi-layer Poka-Yoke systems to ensure zero-defect production: Sensor-based validation (presence/absence, orientation, alignment) Define and achieve production KPIs: cycle time, throughput, line balancing, and automation percentage. Design and integrate Automatic Tool Changer (ATC) systems for robotic and CNC-assisted assembly operations. Selection of Conveyor, Robots, Servo Press, Indexing table and assembly process equipment. Lead full line qualification (FAT, SAT, IQ/OQ/PQ) and ensure compliance with aerospace standards (AS9100, NADCAP where applicable). Establish robust traceability systems (part-level serialization, process parameter tracking, genealogy tracking). Design and validate test benches, ensuring calibration, repeatability, and compliance with aerospace testing requirements. Drive OEE improvement initiatives, including availability, performance, and quality optimization. Develop and implement maintenance strategies (predictive, preventive, condition-based) to maximize uptime and reliability. Integrate ergonomic considerations for hybrid/manual stations, ensuring operator safety, efficiency, and compliance. Lead root cause analysis (RCA) and continuous improvement using Lean, Six Sigma, and data-driven tools. Collaborate with cross-functional teams & External Partners/OEMs (automation, controls, quality, supply chain, digital engineering). Implement IIoT-enabled manufacturing systems for real-time data acquisition, machine connectivity, and performance monitoring. Build and utilize Digital Twin / Process Twin models to simulate, validate, and optimize line performance, cycle time, and layout. <br>Minimum Qualifications<br><br>Bachelor’s or Master’s degree in Mechanical Engineering or related discipline. 10+ years of experience in automated assembly and testing systems, preferably in aerospace, defense, or high-precision manufacturing. Strong hands-on expertise in assembly processes: tightening, dispensing, pressing, and welding. Experience with IIoT systems, machine connectivity, and industrial data acquisition. Proven experience in design validation, tolerance stack-up, and production industrialization. Experience in line qualification (FAT, SAT, IQ/OQ/PQ) and process capability validation. Strong understanding of OEE, cycle time optimization, and line balancing techniques. Experience with test systems validation, calibration methods, and MSA (Measurement System Analysis). Familiarity with aerospace quality standards (AS9100, ISO, NADCAP). <br><br>Preferred Qualifications<br><br>3D and 2D cad experience and strong customer drawing reading and analyzing experience and assembly stack up tolerance detail. Knowledge of assembly operation in Indexing/Turn table, Conveyor pallets, Magne motion system and AMR/AGV Experience with traceability systems and MES integration. Strong background in predictive maintenance and reliability engineering (MTBF/MTTR). Exposure to human factors engineering and ergonomics design standards. Experience working in lights-out / dark factory environments. Experience in Digital Twin / simulation platforms (e.g., Visual Components, Process Twin). Strong analytical and problem-solving skills Attention to detail and quality-driven mindset Ability to lead cross-functional technical initiatives Effective communication and training capabilities <br><br>How To Apply<br><br>Are you ready to embark on an exciting journey with Venture One? If you're a visionary with a passion for innovation, we want to hear from you. To apply, please send your resume detailing your relevant experience and why you're the perfect fit for this role.<br><br>At Venture One, we believe that diverse perspectives drive innovation. We are committed to creating an inclusive and equal opportunity workplace. All qualified applicants will receive equal consideration for employment. Join us in shaping the future of business. Apply today and let's venture into a world of possibilities together!