Mechanical Design Engineer Jobs in UAE

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Special Note – Jakarta Recruitment Event</b> <br><p>This vacancy is linked to Air Arabia’s upcoming <strong>invitation-only Engineering Recruitment Event in Jakarta, Indonesia</strong>.&nbsp; Candidates should apply to this vacancy only if they are available to attend the recruitment event in Jakarta during the <strong>first week of September 2026</strong>, subject to being shortlisted and invited by Air Arabia.&nbsp; Full event details, including venue, date, timing and interview schedule, will be shared only with shortlisted candidates prior to the event.</p><br><br><br><p>If you are interested in similar Air Arabia opportunities but are not available to attend the Jakarta event, please apply separately to the relevant non-event vacancy on the Air Arabia careers site.</p><br><br><b>Job Purpose</b> <br><p>The successful candidate carries out and supervises Line/ Base-level maintenance tasks on Air Arabia and third-party aircrafts within the CAR 66 ‘B1’ License Category, ensuring the required work is performed, certified and recorded accurately and timely in accordance with Air Arabia and regulatory requirements.</p><br><br><b>Key Result Responsibilities</b> <br><p><strong>Operational Excellence</strong></p><br><br><ul><li>Reviews assigned task cards with the Maintenance Manager to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.</li><li>Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.</li><li>Carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.</li><li>Performs defect troubleshooting and rectification in accordance with Aircraft Maintenance Manuals and instructions provided by Engineering Department.</li><li>Signs off maintenance tasks performed or supervised within the scope of own authorisation, verifying that the task card and associated documents have been completed to the required standard following completion of all maintenance.</li><li>Manages communications with other Engineers and Technicians related to the assigned tasks, ensuring proper coordination, continuity and handover of work.</li></ul><br><p><strong>Safety</strong></p><br><br><ul><li>Manages the safety of assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</li><li>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.</li><li>Manages human factors aspects of maintenance, ensuring that the continuity of critical maintenance tasks is protected, by avoidance of task interruption and the proper use of handover procedures.</li></ul><br><p><strong>Reputation and Teamwork</strong></p><br><br><ul><li>Internal Customer Service: provides positive support to other operational teams in ABY, provides proactive and helpful professional advice, suggestions and solutions.</li><li>Leadership: provides sound supervision and guidance of Technicians assigned to support own tasks. Ensures they are adequately briefed to perform the non-certifying maintenance tasks.</li><li>Representing Air Arabia:&nbsp; presents a positive and competent image of technical professionalism to ABY Flight Crews, other companies’ personnel and ABY customers.</li></ul><br><p><strong>Cost Awareness</strong></p><br><br><ul><li>Maintains positive awareness of the cost of aircraft maintenance including use of time and materials. Minimizes unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Holds /has held an EASA Part 66 or GCAA CAR 66 B1 Aircraft Maintenance License and company maintenance approvals on the Airbus A320.</li><li><strong>Note:</strong> must commit to ensure any limitations removed from license within 9 months of induction.</li><li>Ability to obtain an unrestricted GCAA CAR 66 B1 Category License.</li><li>Able to demonstrate in-depth airframe and engine systems maintenance knowledge.</li><li>Ability to read, write, speak and understand English to a good standard for technical communications.</li><li>Good computer skills (Microsoft Office).</li><li>Ability to obtain a UAE driving license</li></ul><br><b>Work Experience</b> <br><p><strong>External applicants</strong></p><br><br><ul><li>At least 2 years’ experience certifying maintenance on the Airbus A320 family of aircraft.</li><li>At least 5 years’ experience in a Line/Base Maintenance environment.</li></ul><br><br> </div>

Purpose of the Role• Operate and administer the Corporate Services Service Desk, to efficiently process all tasks and work orders to the highest performance standard in line with established SLAs and KPIs.• Operate Client’s access control system to ensure all access provisions are performed accurately and efficiently. • This role will report into: Analyst – Hospitality & Employee Service.<br>Main Duties and Responsibilities • Receive and act upon requests for access control related items to administer access to all users.• Monitor, operate and administer the Corporate Services Service Desk, assign the relevant tasks to different users and complete the tasks of the Service Desk administrator.• Scheduling of repeating tasks on behalf of all CS section heads on the Service Desk software, assign the same properly and follow up for completion.• Generate access control and access level reports in pre-defined intervals and distribute the same.• Complete specialist access control reports for restricted areas and report on the same to the section head in charge of security.• Generate a large set of different reports for the CS division on a regular basis and report on the results to the section heads.• Effectively prioritize tasks depending on urgency and raise awareness concerning emergency requests with the relevant section head.• Answer the Service Desk telephone extension in an efficient and pleasant manner, assist callers with their inquiry and transfer them as necessary.• Process extensive reports for time & attendance and make adjustments on request.• Issues and updates client & Contractor ID cards with accuracy and in a timely manner.• Provide inventory checks and conduct issuance / return of secure tokens, report on the inventory efficiently to the relevant stakeholders.• Perform area inspections for certain restricted areas in the Council.• Carry out other administrative tasks for the department as assigned by the line manager.<br>Education and Experience<br>Education• Bachelor’s degree.<br>Technical Expertise / Skills / Knowledge• Must have Service Now software experience, preferred with Service Now certification.• Excellent IT skills with all relevant MS Office suite products, AI platforms and access control systems.• Excellent communication skills in English, with Arabic as a preferred addition.• High attention to detail and ability to multi-task with ease.• Able problem solver with creativity to suggest solutions

<ul><li>Handle customer calls and ensure smooth operation of desktop computers, laptops, and related devices</li><li>Resolve hardware and software issues to maintain productivity</li><li>Troubleshoot and resolve issues related to hardware components (CPU, RAM, storage, peripherals)</li><li>Ask targeted questions to diagnose problems</li><li>Guide users with simple, step-by-step instructions</li><li>Install, configure, and maintain operating systems (Windows, macOS)</li><li>Deploy and support software applications (productivity suites, antivirus, security tools)</li><li>Provide technical assistance with printers, scanners, and other peripherals</li><li>Troubleshoot network connectivity issues, including wireless and wired connections</li><li>Configure network settings and troubleshoot VPN connections</li><li>User Account Management - Create, modify, and delete user accounts</li><li>Manage user permissions and access rights</li><li>Provide remote technical support using tools like TeamViewer or Remote Desktop</li><li>Visit user workstations to resolve hardware or software issues that cannot be addressed remotely</li><li>Proactively analyze root causes for repeated incidents</li><li>Track and manage IT assets including computers, peripherals, and software licenses</li><li>Create and maintain technical documentation, KBs for troubleshooting procedures and user guides</li><li>Provide management reports (Statistics, Trend analysis, Corrective Action)</li><li>Perform remote software distribution</li><li>Improve skills in line with new technology rollouts in the IT Department</li><li>Gather user requirements, analyze them and make recommendations</li><li>Identify misuse and misappropriation of IT assets and report violations to IT Management</li><li>Perform other duties and responsibilities as assigned by line Manager</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Knowledge of Microsoft products and ITIL Processes (mandatory ITIL certification Foundation level or higher)</li><li>Experience with ticketing systems (ServiceNow, HPSM, Manage Engine, Ivanti)</li><li>Experience with remote support tools (TeamViewer, Remote Desktop)</li><li>Familiarity with cloud platforms (AWS, Azure, Google Cloud)</li><li>Experience with Active Directory, Exchange, and Office 365</li><li>Ability to explain technical concepts clearly to non-technical users</li><li>Effective listening skills</li><li>Patience, empathy to deal with frustrated or anxious users</li><li>Ability to build rapport and trust with end-users</li><li>Ability to work effectively as part of a team</li><li>Willingness to share knowledge and assist colleagues</li><li>Ability to adapt to changing priorities and work environments</li><li>Openness to learning new technologies and processes</li><li>Adaptability to work outside regular business hours for critical systems</li><li>Strong commitment to continuous learning and professional development</li></ul>

<br><ul><li><p>Preventative maintenance and reactive service of building automation and HVAC control</p></li></ul><p>systems</p><ul><li><p>Fault finding and rectification of control panels, field devices, networks, and software</p></li><li><p>Use of diagnostic tools and remote service platforms to identify and resolve issues</p></li><li><p>Evaluation of customer systems and providing technical recommendations</p></li><li><p>Supporting site safety activities including OH&S compliance and risk assessments</p></li><li><p>Assisting with minor works, upgrades, and commissioning activities</p></li><li><p>Providing technical input into quotes, planning, and service delivery where required</p></li><li><p>Maintaining accurate service records, reports, and customer documentation</p></li><li><p>Building strong working relationships with customers and internal stakeholders</p></li></ul><p>To be successful in this role, you will bring a strong technical foundation, a customer focused</p><p>mindset, and a practical approach to problem solving.</p><br><p><strong><u>Essential skills and experience</u></strong></p><ul><li><p>Solid understanding of HVAC fundamentals and building services systems</p></li><li><p>Experience working in a service or maintenance environment</p></li><li><p>Current Victorian Electrical Licence</p></li><li><p>Strong fault finding and troubleshooting skills</p></li><li><p>Comfortable working independently across multiple sites</p></li><li><p>Clear written and verbal communication skills</p></li><li><p>Strong customer engagement and interpersonal skills</p></li></ul><br><p><strong><u>Desirable skills and experience</u></strong></p><ul><li><p>Experience with Building Automation Systems including Siemens Desigo, or similar</p></li></ul><p>platforms</p><ul><li><p>Knowledge of control networks such as BACnet, Modbus, and IP based systems</p></li><li><p>PLC or building controls software exposure</p></li><li><p>Experience with commissioning, testing, or minor project works</p></li><li><p>Understanding of energy efficiency and optimisation principles</p></li><li><p>Confidence using mobile devices, service management systems, and Microsoft tools</p></li><li><p>Awareness of cyber security and OT network best practice in building systems</p></li></ul><p>To be considered for this opportunity, the successful candidate will possess the following:</p><ul><li><p>Experience with HVAC fundamentals and systems (Siemens systems desirable)</p></li><li><p>Knowledge and experience Building Automation systems (Siemens systems desirable)</p></li><li><p>Proficiency with computers, networks and 3rd party software ( i.e. Microsoft )</p></li><li><p>Experience with Building Automation / PLC / Process software programming</p></li><li><p>Excellent written and verbal communications skills</p></li><li><p>The ability to demonstrate strong customer engagement and relationship skills</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Proficiency in programming and troubleshooting various BAS platforms (e.g., Johnson Controls, Siemens, Honeywell, Tridium).</li><li>Minimum of 3-5 years of hands-on experience servicing and maintaining Building Automation Systems.</li><li>Strong understanding of HVAC principles, electrical systems, and control strategies.</li><li>Excellent analytical and problem-solving skills, with a methodical approach to diagnostics.</li><li>Exceptional communication and interpersonal skills to effectively interact with clients and team members.</li><li>Ability to read and interpret electrical schematics, P&IDs, and control sequences.</li><li>Willingness to travel occasionally and work flexible hours, including on-call support.</li></ul>

<p><strong>After-Sales Service Management</strong></p><ul><li><p>Lead and manage all after-sales service activities across the sanitaryware product portfolio.</p></li><li><p>Ensure timely response and resolution of service requests and warranty claims.</p></li><li><p>Establish service standards and service level agreements (SLAs).</p></li><li><p>Monitor service quality and customer satisfaction levels.</p></li></ul><p><strong>Client Complaint Management</strong></p><ul><li><p>Act as the primary escalation point for customer complaints.</p></li><li><p>Conduct root-cause analysis and implement corrective actions.</p></li><li><p>Ensure complaints are resolved within agreed timelines.</p></li><li><p>Maintain records of complaints and service interventions.</p></li></ul><p><strong>Spare Parts & Inventory Management</strong></p><ul><li><p>Manage spare parts inventory to ensure product support continuity.</p></li><li><p>Monitor stock levels and forecast spare parts requirements.</p></li><li><p>Coordinate with procurement and suppliers to maintain optimum inventory levels.</p></li><li><p>Minimize stock-outs and excess inventory.</p></li></ul><p><strong>Supplier & Manufacturer Coordination</strong></p><ul><li><p>Liaise with manufacturers and suppliers regarding product issues, warranty claims, and spare parts availability.</p></li><li><p>Ensure timely procurement and replenishment of critical components.</p></li><li><p>Support technical discussions and product improvement initiatives.</p></li></ul><p><strong>Technical Support & Product Expertise</strong></p><ul><li><p>Provide technical guidance to sales teams, project teams, and customers.</p></li><li><p>Conduct product troubleshooting and technical assessments.</p></li><li><p>Support product demonstrations and technical presentations.</p></li><li><p>Train internal teams on product features, installation standards, and maintenance requirements.</p></li></ul><p><strong>Reporting & Performance Management</strong></p><ul><li><p>Prepare periodic reports on service performance.</p></li><li><p>Track service KPIs and customer satisfaction metrics.</p></li><li><p>Present recommendations for operational improvements.</p></li><li><p>Report inventory performance and supplier responsiveness.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Proven ability to manage after-sales service</strong>, ensuring timely resolution of customer complaints, warranty claims, and adherence to service level agreements (SLAs).</p></li><li><p><strong>Excellent stakeholder management and communication skills</strong>, with experience working closely with developers, contractors, consultants, and facilities management companies.</p></li><li><p><strong>Strong analytical and organizational skills</strong>, with experience in root-cause analysis, inventory management, service quality monitoring, and driving high customer satisfaction.</p></li></ul><br><p><strong>What equips you for the role:</strong>&nbsp;</p><br><ul><li><p>Bachelor degree in relevant engineering discipline</p></li><li><p><strong>5+ years of experience</strong> in sanitaryware, plumbing products, building materials, or a related industry, with strong exposure to after-sales service operations in UAE</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span><span><span><span><span>To act as a focal point for all maintenance to be performed in the UAE, Hubs and Outstations on 24/7 basis; ensures timely availability and continued airworthiness of Air Arabia fleet and Third Party aircrafts in accordance with business requirements, GCAA/CAA rules and regulations, and as per Air Arabia policies, procedures, and approved quality standards.</span></span></span></span></span></p><br><br><b>Key Result Responsibilities</b> <br><ol><li>Assists in the identification, assessment, reporting and monitoring of the various types of technical defects on the Air Arabia fleet, ensuring all AMP tasks are carried timely and efficiently and that all aircrafts are maintained within agreed technical standards whether they are airborne or on ground.</li><li>Supports the Engineering Planning and Development, STP, and QA teams in executing long-term/ short-term planning and in monitoring of fleet maintenance operations ensuring aircrafts are timely and “safely maintained and released” to service.</li><li>Prioritizes, and manages the allocation of work packages of all tasks amongst corresponding teams whilst following up on timeliness and efficiency in the delivery and handover of tasks executed.</li><li>Acts proactively, takes corrective preventive measures to avoid any problems or defects that might threaten the airworthiness of the fleet and delay operations.</li><li>Provides technical guidance to Line, Base, Outstations’ maintenance staff and MROs, on 24/7 basis, ensuring service is executed in conformity, within approved timeframes, and as per GCAA/CAA regulations, Air Arabia approved quality standards, and Manufacturer’s Manuals.</li><li>Delivers optimum technical support and guidance to pilots and cabin crew whilst on flight or on ground; immediately responds to flights coverage with flexibility to schedule changes to cover function-related operations.</li><li>Ensures prompt and accurate recording and documenting of any maintenance tasks performed including Radio Communication on the logbook of each aircraft.&nbsp; Guides the Pilots and Cabin Crew on formalities adopted in recording and generating related reports.</li><li>Assists the MCC Manager, Stakeholders in UAE, Hubs, and Outstations in monitoring the daily flights technical performance, records, data and incidents; effectively and timely communicates necessary information related to identifying/rectifying defects affecting the operational performance as per proper channel.</li><li>Provides reports on trends of technical performance and recommends corrective measures to ensure no re-occurrence. Assists in Internal/External audit practices within the MCC to ensure abidance by guidelines and regulations.</li><li>Supports the Manager Training and Standards in the MCC Team’s needed technical training ensuring staff compliance with licensing regulatory requirements.&nbsp; Conducts necessary technical training, coaching, mentoring and assessments for Air Arabia/0Third Party certifying engineers, instructors and technicians including Initial, Recurrent, Technical Checks, ETOPs, Transit, Human Factor, etc.</li><li>Handles emergency cases across the entire network and recommends solutions utilizing available resources in the respective area; in case of AOG, grounds, if necessary, an aircraft as per adopted procedures; holds sessions to communicate incidents and share experiences with MCC Engineers, Technical Instructors, and maintenance staff.</li><li>Maintains effective and accurate communication with service providers, suppliers and MROs, generates periodic reports with feedback to MCC Manager on service providers’ performance and quality of services.</li></ol><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span><span><span><span><span>Bachelor degree in Aircraft Engineering/Aeronautical or equivalent; alternately a diploma in the related field from a recognized university or engineering college combined with needed experience and exposure.</span></span></span></span></span></li><li><span><span><span><span><span>Holds/has held the corresponding type-rating maintenance releasing license, other aircraft types are a plus.</span></span></span></span></span></li><li><span><span><span><span><span>Holder/has held Maintenance Engineer’s member license type AME from an ICAO state is an advantage.</span></span></span></span></span></li><li><span><span><span><span><span>Professional membership of associations related to the Aviation/Airlines industry is a plus.</span></span></span></span></span></li><li><span><span><span><span><span>Capable of using technology systems &amp; tools; proficient in Microsoft Office.</span></span></span></span></span></li><li><span><span><span><span><span>Fluent in English Language.</span></span></span></span></span></li></ul><br><b>Work Experience</b> <br><ul><li><span><span><span><span><span>8</span></span><span><span> + years’ experience in engineering maintenance in the Aviation industry, 3 years of which in Maintenance Control Center in a similar capacity. with 2 years at least leading a team.</span></span></span></span></span></li><li><span><span><span><span><span>Has direct working experience with Civil Aviation Authorities, preferably GCAA; familiar with all rules and regulations of GCAA pertaining to the Engineering Maintenance, policies, procedures, manuals and licensing.</span></span></span></span></span></li><li><span><span><span><span><span>Knowledge and exposure on airline and Flight Operations</span></span><span><span> formalities and standard regulations; good understanding of Flight crew thought process. </span></span></span></span></span></li><li><span><span><span><span><span>Exposure to Quality Assurance /Safety/Internal &amp; External Audit functional operations and practices related to and affecting maintenance.</span></span></span></span></span></li><li><span><span><span><span><span>A balanced personality, composed, capable of dealing with emergencies with efficiency and commitment to successful safe results. </span></span></span></span></span></li><li><span><span><span><span><span>Experienced in implementing maintenance policies, procedures and operating manuals as per business needs and in line with adopted regulations and approved quality standards.</span></span></span></span></span></li><li><span><span><span><span><span>High accuracy and attention to both results and details.</span></span></span></span></span></li><li><span><span><span><span><span>Ability to interpret, assimilate data and express ideas and concepts clearly.</span></span></span></span></span></li><li><span><span>Proven skills in analyzing data, identifying pitfalls and recommending cost-effective solutions</span></span></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ol><li>Education<strong> Required: </strong></li></ol><ul><li>Four-Five years engineering or any other discipline for safety Advisor/specialist OR secondary education of 2 years course</li><li>NEBOSH IGC or International Diploma or Level 6 achievement in HSE discipline for safety advisor/specialist, OSHA/IOSH certificate for safety officer.</li><li>Preferred Certified Lead Auditor for management systems (ISO 45001:2018 and ISO 14001:2015)</li></ul><br> Keys of responsibilities<br> Act as the HSE focal point to site, project, and management including during both routine progress meetings and emergent issue resolution.<ul><li>Developing and implementing Project HSE Plan in line with project contractual requirements and maintaining it throughout the project life cycle.</li><li>Contribute to and/or plans and executes Health, Safety and Environment (HSE) performance and related projects. Develop and report on project objectives.</li><li>Represent the HSE function to current and prospective customers.</li><li>Maintain required HSE records and develop and present routine HSE progress reports.</li><li>Maintain awareness of developments and legislation that impact assigned functions.</li><li>Lead accident investigations to ensure that root-cause analysis is appropriately conducted, and corrective actions address the causes.</li><li>Participate and support analysis of incident trends and provide recommendations for preventative and improvement actions.</li><li>Conduct project site visits and audits to evaluate the effectiveness of HSE processes and assist in taking the necessary steps to close gaps in execution.</li><li>Facilitate and direct HSE best practices to ensure continuous improvement and to instill a world-class culture.</li><li>Provide advice, support and training where necessary to management and workforce to achieve HSE objectives and maintain regulatory compliance.</li><li>Assist in the identification, analysis and development of controls to eliminate or minimize occupational hazards at project and service locations.</li><li>Act as the HSE focal point to site, project, and management including during both routine progress meetings and emergent issue resolution.</li><li>Provide summary of lessons learned feedback to HSE Manager to support further Process Improvements Initiatives</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><strong><u>Job Purpose</u></strong></p><br><p>Support and execute project engineering activities across the full project lifecycle - from concept to handover - including FEED, detailed engineering, construction, and commissioning, ensuring delivery in line with safety, quality, schedule, cost, and Value Assurance Process (VAP) requirements.</p><br><p>The role involves close coordination with engineering disciplines, Central Engineering, licensors, contractors, vendors, and operations teams to ensure effective technical execution, compliance with ADNOC standards, and timely project completion.</p><br><p><strong><u>Key Accountabilities</u></strong></p><br><p><strong>Project Engineering and Execution </strong></p><br><ul><li>Support all phases of project delivery from concept through to commissioning and handover</li><li>Contribute to development of Statement of Requirements (SOR) and project execution strategies</li><li>Assist in preparation of tender documents and evaluation of engineering consultants, PMC, and EPC contractors</li><li>Review contractor engineering deliverables, construction strategies, and methodologies to ensure compliance with scope and specifications</li><li>Monitor engineering, procurement, and construction progress and identify potential bottlenecks with recommended corrective actions</li><li>Support value engineering, constructability reviews, and project workshops</li></ul><p><strong>Coordination &amp; Stakeholder Management</strong></p><br><ul><li>Coordinate with licensors, contractors, vendors, and internal stakeholders</li><li>Participate in project meetings and technical reviews</li><li>Support alignment between Engineering, Operations, and Project teams</li></ul><p><strong>Project Control, Contracts &amp; Cost</strong></p><br><ul><li>Monitor contractor performance, invoices, and project costs in coordination with cost teams</li><li>Evaluate contractor claims and support negotiation and contract close-out</li><li>Track project variations, risks, and trends impacting cost and schedule</li></ul><p><strong>Risk, Quality &amp; Compliance</strong></p><br><ul><li>Facilitate risk analysis, PHSER, and ATR reviews in line with ADNOC procedures</li><li>Ensure compliance with safety, quality, and engineering standards across project activities</li><li>Support implementation of HSE requirements during engineering and execution phases</li></ul><p><strong>Reporting &amp; Documentation</strong></p><br><ul><li>Maintain project documentation, records, and close-out documentation</li><li>Support preparation of progress reports for management</li></ul><p><strong>Construction, Commissioning &amp; Handover</strong></p><br><ul><li>Coordinate pre-commissioning and commissioning activities with contractors and operations teams</li><li>Review commissioning procedures, documentation, and readiness plans</li><li>Monitor punch list closure and ensure completion of construction and commissioning activities</li><li>Facilitate handover of project facilities to Operations and support start-up activities</li></ul><p><strong><u>Minimum Requirements</u></strong></p><br><ul><li>Bachelor Degree in Engineering</li><li>At least 6 years in project engineering in an oil and gas industry</li><li>Strong ability to coordinate and support multi-disciplinary project execution</li><li>Effective monitoring of contractor performance and deliverables</li><li>Proactive identification of engineering and execution risks</li><li>Ability to ensure technical compliance and quality assurance</li><li>Strong collaboration with project, engineering, and operations teams</li></ul><br><ul><li>Gain full understanding of project portfolio, engineering scope, and contractor interfaces</li><li>Support timely delivery of engineering and project activities across assigned projects</li><li>Improve coordination between engineering, procurement, and execution teams</li><li>Contribute to reduction of project delays through proactive issue identification and resolution</li><li>Ensure accurate reporting, documentation, and compliance with ADNOC project requirements</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><strong><span>About the Role</span></strong></p><br><p>Support and execute project engineering activities across the full project lifecycle - from concept to handover - including FEED, detailed engineering, construction, and commissioning, ensuring delivery in line with safety, quality, schedule, cost, and Value Assurance Process (VAP) requirements.</p><br><p>The role involves close coordination with engineering disciplines, Central Engineering, licensors, contractors, vendors, and operations teams to ensure effective technical execution, compliance with ADNOC standards, and timely project completion.</p><br><p><strong><u>Key Accountabilities</u></strong></p><br><p><strong>Project Engineering and Execution </strong></p><br><ul><li>Support all phases of project delivery from concept through to commissioning and handover</li><li>Contribute to development of Statement of Requirements (SOR) and project execution strategies</li><li>Assist in preparation of tender documents and evaluation of engineering consultants, PMC, and EPC contractors</li><li>Review contractor engineering deliverables, construction strategies, and methodologies to ensure compliance with scope and specifications</li><li>Monitor engineering, procurement, and construction progress and identify potential bottlenecks with recommended corrective actions</li><li>Support value engineering, constructability reviews, and project workshops</li></ul><p><strong>Coordination &amp; Stakeholder Management</strong></p><br><ul><li>Coordinate with licensors, contractors, vendors, and internal stakeholders</li><li>Participate in project meetings and technical reviews</li><li>Support alignment between Engineering, Operations, and Project teams</li></ul><p><strong>Project Control, Contracts &amp; Cost</strong></p><br><ul><li>Monitor contractor performance, invoices, and project costs in coordination with cost teams</li><li>Evaluate contractor claims and support negotiation and contract close-out</li><li>Track project variations, risks, and trends impacting cost and schedule</li></ul><p><strong>Risk, Quality &amp; Compliance</strong></p><br><ul><li>Facilitate risk analysis, PHSER, and ATR reviews in line with ADNOC procedures</li><li>Ensure compliance with safety, quality, and engineering standards across project activities</li><li>Support implementation of HSE requirements during engineering and execution phases</li></ul><p><strong>Reporting &amp; Documentation</strong></p><br><ul><li>Maintain project documentation, records, and close-out documentation</li><li>Support preparation of progress reports for management</li></ul><p><strong>Construction, Commissioning &amp; Handover</strong></p><br><ul><li>Coordinate pre-commissioning and commissioning activities with contractors and operations teams</li><li>Review commissioning procedures, documentation, and readiness plans</li><li>Monitor punch list closure and ensure completion of construction and commissioning activities</li><li>Facilitate handover of project facilities to Operations and support start-up activities</li></ul><p><strong><u>Minimum Requirements</u></strong></p><br><ul><li>Bachelor Degree in Engineering</li><li>At least 6 years in project engineering in an oil and gas industry</li><li>Strong ability to coordinate and support multi-disciplinary project execution</li><li>Effective monitoring of contractor performance and deliverables</li><li>Proactive identification of engineering and execution risks</li><li>Ability to ensure technical compliance and quality assurance</li><li>Strong collaboration with project, engineering, and operations teams</li></ul><br><ul><li>Gain full understanding of project portfolio, engineering scope, and contractor interfaces</li><li>Support timely delivery of engineering and project activities across assigned projects</li><li>Improve coordination between engineering, procurement, and execution teams</li><li>Contribute to reduction of project delays through proactive issue identification and resolution</li><li>Ensure accurate reporting, documentation, and compliance with ADNOC project requirements</li></ul><br><br> </div>

<p>We envisage success in this role to include; Demonstrating extensive knowledge and experience in the execution of civil, infrastructure, building, landscape and irrigation works.  Ability to make senior level project decisions and liaise with applicable authorities. Familiar with the DM General Conditions of Contract, Quality Assurance, Quantity Surveying, and Project Network Techniques. Strong computer skills in Microsoft Word, Excel, Microsoft Project. Excellent written and communication skills (English), time management, and supervisory skills. Demonstrated ability to prepare instructions, specifications, and reports and cost estimates.</p><p>To be successful in this dynamic opportunity, we envision that your career journey to date will include 10 years work experience partnered with a Bachelor degree in Civil Engineering.  KEO’s performance is founded upon integrity, results, innovation, safety and our people. We embrace diversity and recognize its’ contribution to client success wherever we work. We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</p>

<p>We envisage success in this role to include; Demonstrating extensive knowledge and experience in the execution of civil, infrastructure, building, landscape and irrigation works.  Ability to make senior level project decisions and liaise with applicable authorities. Familiar with the DM General Conditions of Contract, Quality Assurance, Quantity Surveying, and Project Network Techniques. Strong computer skills in Microsoft Word, Excel, Microsoft Project. Excellent written and communication skills (English), time management, and supervisory skills. Demonstrated ability to prepare instructions, specifications, and reports and cost estimates.</p><p>To be successful in this dynamic opportunity, we envision that your career journey to date will include 10 years work experience partnered with a Bachelor degree in Civil Engineering.  KEO’s performance is founded upon integrity, results, innovation, safety and our people. We embrace diversity and recognize its’ contribution to client success wherever we work. We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The ideal candidate should possess a&nbsp;<strong>degree or Diploma in Electrical Engineering</strong> or a closely related engineering discipline. Candidates with additional technical certifications or specialized training relevant to construction, civil works, power plant operations, or substation projects will have an added advantage.</p><br><p>Applicants must have&nbsp;<strong>a minimum of 3 years and a maximum of 10 years of relevant professional experience</strong>, preferably gained in&nbsp;<strong>civil engineering projects, power plants, or electrical substations</strong>. Experience in&nbsp;<strong>Gulf countries and/or India</strong> is highly desirable, as it demonstrates familiarity with regional standards, practices, and regulatory requirements. Exposure to diverse project environments and multicultural teams will be beneficial.</p><br><strong>Technical Skills and Project Experience</strong><p>The candidate should have hands-on experience in executing engineering projects, particularly in&nbsp;<strong>construction, installation, testing, and commissioning</strong> activities. They should be well-versed in interpreting engineering drawings, specifications, and technical documents.</p><br><p>Practical knowledge and experience in the following areas are essential:</p><br><ul><li><strong>Quality Management Systems (QMS)</strong>: Ensuring project activities comply with established quality standards and procedures.</li><li><strong>Health, Safety, and Environment (HSE)</strong>: Implementing HSE policies, conducting risk assessments, and promoting a safe work culture.</li><li><strong>Risk Management</strong>: Identifying, evaluating, and mitigating risks throughout the project lifecycle.</li><li><strong>Subcontractor Management</strong>: Coordinating with subcontractors, monitoring progress, and ensuring contractual compliance.</li><li><strong>Project Execution and Monitoring</strong>: Tracking project progress, managing resources, and ensuring timely delivery within budget constraints.</li></ul><p>Experience in&nbsp;<strong>power plants and substations</strong>, including electrical installation, cable laying, transformer erection, switchgear installation, and testing, will be highly preferred.</p><br><strong>Leadership and Supervisory Responsibilities</strong><p>The role requires candidates with proven&nbsp;<strong>management and supervisory experience</strong>. The candidate should be capable of leading teams effectively and ensuring that project objectives are achieved efficiently.</p><br><p>Key responsibilities include:</p><br><ul><li><strong>Managing and Supervising Site Activities</strong>: Overseeing daily operations at the project site and ensuring work is carried out according to approved plans and schedules.</li><li><strong>Team Leadership</strong>: Guiding and motivating site engineers, technicians, and workers to maintain productivity and quality standards.</li><li><strong>Resource Allocation</strong>: Efficient utilization of manpower, materials, and equipment.</li><li><strong>Progress Monitoring</strong>: Tracking milestones, preparing progress reports, and identifying delays or bottlenecks.</li><li><strong>Problem Resolution</strong>: Addressing technical and operational challenges promptly to avoid disruptions.</li></ul><p>The candidate should demonstrate a proactive approach to leadership, ensuring smooth coordination between different teams and stakeholders.</p><br><strong>Communication and Coordination Skills</strong><p>Strong&nbsp;<strong>communication and interpersonal skills</strong> are essential for this role. The candidate must be able to interact effectively with various stakeholders, including:</p><br><ul><li><strong>Clients</strong></li><li><strong>Consultants</strong></li><li><strong>Vendors and Suppliers</strong></li><li><strong>Internal Project Teams</strong></li></ul><p>They should be confident in conducting meetings, presenting updates, and resolving issues collaboratively. Effective written communication skills are also important for preparing reports, documentation, and correspondence.</p><br><strong>Personal Attributes and Competencies</strong><p>The ideal candidate should be a&nbsp;<strong>self-motivated and result-oriented professional</strong> who can work independently as well as part of a team. They should possess the following qualities:</p><br><ul><li><strong>Problem-Solving Abilities</strong>: Capability to analyze complex situations and implement practical solutions.</li><li><strong>Attention to Detail</strong>: Ensuring accuracy and compliance with specifications.</li><li><strong>Time Management</strong>: Ability to handle multiple tasks and meet deadlines.</li><li><strong>Adaptability</strong>: Willingness to work in dynamic environments and adjust to project demands.</li><li><strong>Decision-Making Skills</strong>: Ability to make informed decisions under pressure.</li></ul><strong>Additional Expectations</strong><ul><li>Familiarity with&nbsp;<strong>local regulations and international standards</strong> related to electrical and civil engineering projects.</li><li>Understanding of project documentation, including method statements, inspection test plans (ITPs), and project schedules.</li><li>Commitment to maintaining high standards of&nbsp;<strong>safety, quality, and professionalism</strong> in all aspects of work.</li></ul> </div>

<ul><li><p>Lead and oversee QA/QC activities for civil construction works throughout the project lifecycle.</p></li><li><p>Develop, implement, and maintain project-specific Quality Assurance and Quality Control procedures in accordance with project requirements.</p></li><li><p>Review project specifications, drawings, BOQs, method statements, ITPs, and contract documents to establish quality requirements.</p></li><li><p>Prepare and review Inspection and Test Plans, checklists, method statements, quality procedures, and inspection forms.</p></li><li><p>Ensure all civil construction activities are executed in accordance with approved drawings, specifications, standards, and approved method statements.</p></li><li><p>Supervise quality inspections for earthworks, excavation, backfilling, foundations, reinforcement, formwork, concrete works, structural works, masonry, waterproofing, roads, drainage, utilities, and finishing works.</p></li><li><p>Review material submittals and ensure materials received at site comply with approved specifications and project requirements.</p></li><li><p>Coordinate with laboratories for material testing, including concrete, soil, aggregates, reinforcement steel, asphalt, and other construction materials.</p></li><li><p>Witness and verify field and laboratory tests and ensure test results meet specified acceptance criteria.</p></li><li><p>Ensure proper documentation and traceability of material approvals, test certificates, inspection requests, and quality records.</p></li><li><p>Raise, review, and close Inspection Requests and ensure timely inspection by consultants/client representatives.</p></li><li><p>Identify non-conforming works and materials and initiate NCRs, observations, and corrective action processes.</p></li><li><p>Coordinate with construction teams to investigate quality issues and implement effective corrective and preventive actions.</p></li><li><p>Monitor closure of NCRs, site observations, punch points, and outstanding quality issues.</p></li><li><p>Conduct regular site inspections and quality audits to verify compliance with approved procedures and project requirements.</p></li><li><p>Conduct internal quality audits and support external, client, consultant, and certification audits.</p></li><li><p>Ensure calibration and validity of inspection, measuring, and testing equipment used on the project.</p></li><li><p>Monitor workmanship and ensure construction teams follow approved quality standards and procedures.</p></li><li><p>Review subcontractor and supplier quality documentation and monitor their compliance with project QA/QC requirements.</p></li><li><p>Participate in technical meetings, quality meetings, and coordination meetings with clients, consultants, subcontractors, and project teams.</p></li><li><p>Provide technical guidance and support to QA/QC Engineers, Inspectors, supervisors, and construction teams.</p></li><li><p>Review engineering and construction changes to assess their impact on quality requirements.</p></li><li><p>Ensure approved drawings and latest revisions are available at work locations.</p></li><li><p>Monitor concrete pouring activities, including pre-pour inspections, concrete delivery, slump testing, temperature checks, cube sampling, curing, and related documentation.</p></li><li><p>Verify reinforcement installation, formwork dimensions, embedments, anchor bolts, levels, alignment, and other critical civil elements before concrete placement.</p></li><li><p>Monitor waterproofing, protective coatings, sealants, finishes, and other specialist civil works.</p></li><li><p>Prepare and maintain quality reports, inspection records, test reports, NCR logs, audit reports, and quality dashboards.</p></li><li><p>Track quality performance indicators and identify recurring issues and areas for improvement.</p></li><li><p>Support root-cause analysis and implementation of corrective and preventive actions.</p></li><li><p>Ensure quality records are properly compiled for project close-out and handover.</p></li><li><p>Review and coordinate preparation of final QA/QC dossiers, as-built documentation, test certificates, warranties, and handover records.</p></li><li><p>Promote a strong quality culture across project teams and drive continuous improvement initiatives.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of civil construction QA/QC principles and practices.</p></li><li><p>In-depth knowledge of concrete, reinforcement, formwork, earthworks, foundations, structural works, roads, drainage, and finishing activities.</p></li><li><p>Strong understanding of ITPs, method statements, inspection procedures, NCRs, corrective actions, and quality documentation.</p></li><li><p>Knowledge of international standards and specifications such as ASTM, BS, EN, ACI, and relevant project standards.</p></li><li><p>Familiarity with UAE construction codes, authority requirements, and quality practices.</p></li><li><p>Strong knowledge of material inspection and laboratory testing procedures.</p></li><li><p>Ability to read and interpret engineering drawings, specifications, BOQs, and technical documents.</p></li><li><p>Strong auditing, inspection, reporting, and documentation skills.</p></li><li><p>Excellent problem-solving and root-cause analysis capabilities.</p></li><li><p>Strong communication and coordination skills with clients, consultants, contractors, and internal teams.</p></li><li><p>Ability to lead QA/QC teams and work effectively under project deadlines.</p></li><li><p>Proficiency in MS Office and quality management/document-control systems.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Bachelor’s degree in <strong>Civil Engineering</strong> from a recognized university.</p></li><li><p><strong>8–12 years of relevant QA/QC experience</strong> in civil construction, engineering, infrastructure, building, industrial, or EPC projects.</p></li><li><p>Strong experience in managing QA/QC activities for large-scale civil construction projects.</p></li><li><p>Experience with consultants, clients, subcontractors, laboratories, and third-party inspection agencies.</p></li><li><p>Proven experience in preparing and implementing <strong>ITPs, Method Statements, QA/QC Plans, NCRs, and Quality Dossiers</strong>.</p></li><li><p>UAE/GCC experience is highly preferred.</p></li><li><p>Experience working on projects in <strong>Dubai and Abu Dhabi</strong> will be an advantage.</p></li><li><p>Certification such as <strong>ISO 9001 Lead Auditor/Internal Auditor, CSWIP, or other relevant QA/QC certification</strong> will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Compliance of civil works with approved drawings and specifications.</p></li><li><p>Effective implementation of project QA/QC procedures and ITPs.</p></li><li><p>Timely inspection and approval of construction activities.</p></li><li><p>Reduction and timely closure of NCRs and quality observations.</p></li><li><p>Accuracy and completeness of quality documentation.</p></li><li><p>Effective material testing and traceability.</p></li><li><p>Successful completion of client/consultant quality audits.</p></li><li><p>Timely preparation and submission of final QA/QC dossiers and handover documentation.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apply today at Hitachi Energy Full time in Dubai, United Arab Emirates in our Engineering &amp; Science department and be part of a diverse and collaborative team. Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all</p> </div>

Company Overview ROVOP is a Global ROV specialist with an unrivalled track record of reliability and a technologically advanced fleet of subsea remotely operated vehicles. We have years of specialist experience and are able to combine the innovation and commercial agility required in today’s challenging market environment. The ROVOP service offering improves the reliability and operational efficiency of your subsea operations, mitigating risk, optimising performance and creating value, while always ensuring the highest levels of quality and safety.<br>Our commitment to personnel training and development makes ROVOP the ideal place for talented individuals to come and work, learn and develop their careers. We support everyone’s continual professional development in line with personal aspirations.<br>We provide a friendly, open and performance orientated team environment, making ROVOP a great place to work. We are always interested in hearing from driven and enthusiastic people who want to be part of a fast growing, specialist subsea robotics company.<br>Role Summary You will provide support to the Commercial Department in tender preparation along with supporting the Operations team in relation to project commercial issues. This role provides global support to the business.<br>Key duties and responsibilities include, but are not limited to:Prepare and collate budget proposals and tenders, including associated subcontractor andsupplier proposals (where applicable) in accordance with our internal management systems Prepare detailed and accurate tender price estimates Maintain up to date and comprehensive clarification registers for tenders and work with the Technical Sales Manager to ensure a suitable and achievable technical solution is provided Prepare commercial and collate contractual & technical deliverables for inclusion in clienttender submissions (i.e. commercial, contractual, and technical qualifications) with supportfrom other departments where required Draft and/or negotiate Call Offs to previously established contracts Maintain commercial databases such as CRMLead the handover process between Commercial and Operations of all relevant commercialand contractual documents including a detailed review of the tender risk register Provide ongoing support to the operations team in relation to the commercial issues thatarise on project and working with the Project Manager to identify efficiencies to increasethe margin Ensure the accuracy of project invoicing on a monthly basis Work with Supply Chain to ensure supplier management and strategic partnerships arebeing evaluated on a regular basis.<br>About You You should have a number of years’ experience of a similar role previously; with sound numerical and analytical skills. It would be desirable if you had experience of operating in global jurisdictions given the global remit of this role.<br>You should be PC literate with proven experience and knowledge of Microsoft Office Packages including Word, Excel, Power Point and Outlook

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As a Senior Dredge Electrician, you will play a vital role in maintaining and repairing the electrical systems and equipment on board our Self-Propelled Cutter Suction Dredger. Your expertise will ensure the dredger's electrical infrastructure is in optimal condition, enabling efficient and safe operations. You will work closely with the dredging team, providing electrical support and troubleshooting any issues that may arise during dredging operations.<br></p><p>DEVELOP YOUR CAREER WITH INDUSTRY LEADERS</p><br><p>NMDC Group is always looking for talented individuals to join our team. We know that our people are fundamental to our success as a business, which is why we support their career development and personal wellbeing in every way we can.</p><br><p>NMDC Group offers an environment where every employee can thrive and reach their professional potential. Nothing is more important to us than ensuring every employee feels valued and respected in their roles, and able to progress in their career through training, mentorship, and educational opportunities.</p><br><p>With a wide range of attractive employee benefits and competitive salaries, we have created a workplace defined by its culture, and made by its people. If you have a passion for EPC and marine construction and want to work on some of the region’s most exciting projects, find your next challenge with us.</p><br><br>Responsibilities:<br><ul><li> Perform routine maintenance and inspections of electrical systems and equipment on the dredger.</li><li> Diagnose and repair electrical faults and malfunctions promptly, ensuring minimal downtime.</li><li> Install and commission new electrical systems and equipment as required.</li><li> Maintain accurate records of all electrical maintenance and repair activities.</li><li> Ensure compliance with safety regulations and procedures related to electrical work.</li><li> Provide technical support and guidance to junior electricians and other crew members.</li><li> Collaborate with the dredging team to optimize electrical systems for efficient dredging operations.</li><li> Stay updated with the latest advancements in dredging electrical technology and best practices.</li><li> Conduct regular safety audits and ensure the dredger's electrical systems meet industry standards.</li></ul><br>Qualifications:<br><ul><li> Minimum of 5 years of experience as an electrician, with a focus on marine or dredging electrical systems.</li><li> A recognized electrical engineering degree or diploma, or equivalent industry certifications.</li><li> In-depth knowledge of electrical systems, including power generation, distribution, and control systems.</li><li> Strong troubleshooting and problem-solving skills, with the ability to work independently.</li><li> Experience with marine electrical equipment and dredging operations is highly preferred.</li><li> Excellent communication and interpersonal skills for effective collaboration with the crew.</li><li> Ability to work in a dynamic and sometimes challenging marine environment.</li><li> Valid certifications in marine electrical safety practices and procedures.</li><li> Willingness to undergo additional training and development opportunities.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We offer you an <span>Ocean of Possibilities</span>. Join our family.</p><br><p><b>Data &amp; AI Transformation Architect</b></p><br><p>Location: DMESS, Abu Dhabi, UAE</p><br><p>Department: Data &amp; AI</p><br><p>Employment Type: Full-Time</p><br><p><b>Shape the Future of Data &amp; AI at Damen</b></p><br><p>At Damen Shipyards Group, we are on an ambitious journey to become a truly data-powered organization. To support this vision, we are strengthening our Data &amp; AI capabilities and investing in the people, platforms, governance, and technologies that will enable smarter decision-making across the enterprise. The role is intended to help evolve Damen's enterprise data architecture, governance, AI, and analytics capabilities while accelerating organizational data maturity.</p><br><p>We are not looking for someone who simply maintains architecture frameworks.</p><br><p>We are looking for a transformation-oriented Data &amp; AI professional who has successfully helped organizations move from fragmented and developing data capabilities toward leading-practice Data &amp; AI operating models. You may come from manufacturing, shipbuilding, construction, marine, offshore, engineering, energy, utilities, or similar asset-intensive industries where operational complexity, legacy systems, and disconnected data landscapes are common challenges.</p><br><p>This is an opportunity to drive meaningful change, influence business strategy, and shape the future of Data &amp; AI within a global maritime leader.</p><br><p><b>The Role</b></p><br><p>As a Data &amp; AI Transformation Architect, you will serve as a strategic advisor, consultant, and hands-on transformation leader. You will help define the future state of Damen's Data &amp; AI landscape while ensuring practical execution and measurable business value.</p><br><p>You will work closely with business leaders, Data Owners, Data Stewards, Enterprise Architects, Data Engineers, Analysts, Governance teams, and operational stakeholders to establish scalable data foundations, promote AI adoption, strengthen governance, and improve data-driven decision-making across the organization. The role requires a balance between vision, stakeholder management, architecture expertise, and pragmatic delivery.</p><br><p><b>Key Responsibilities</b></p><br><p><b>Lead Data &amp; AI Transformation</b></p><br><ul><li>Assess current Data &amp; AI capabilities and identify maturity improvement opportunities</li><li>Define and execute practical transformation roadmaps aligned with business priorities</li><li>Act as a trusted advisor to senior business and technology stakeholders</li><li>Drive adoption of modern Data Management, Analytics, Governance, and AI practices</li><li>Promote data-driven culture across business functions</li></ul><p><b>Shape Enterprise Data Architecture</b></p><br><ul><li>Develop and mature enterprise-wide data architecture principles, standards, and frameworks</li><li>Further develop and operationalize the Enterprise Data Model</li><li>Align business objectives, governance practices, architecture standards, and technology investments</li><li>Support the evolution of Damen's Data &amp; AI platform vision</li><li>Establish scalable approaches for data ownership, stewardship, quality, and lifecycle management</li></ul><p><b>Deliver Business Value</b></p><br><ul><li>Translate business challenges into practical Data &amp; AI solutions</li><li>Identify and prioritize high-value use cases that deliver measurable business outcomes</li><li>Support responsible and value-driven adoption of AI capabilities</li><li>Enable operational efficiency, improved decision-making, and enhanced business performance through data</li></ul><p><b>Drive Governance &amp; Integration</b></p><br><ul><li>Promote consistency and interoperability across enterprise platforms including SAP, Workday, Salesforce, Azure, and other strategic solutions</li><li>Embed governance, security, compliance, and data quality principles into practical implementations</li><li>Collaborate with Data Governance, Enterprise Architecture, Security, and MDM communities</li><li>Drive standardization and reuse across business domains and systems</li></ul><p><b>Influence &amp; Build Capability</b></p><br><ul><li>Facilitate workshops, strategy sessions, and stakeholder discussions</li><li>Coach leaders and teams on Data Governance, Data Management, and AI adoption</li><li>Translate complex technical concepts into clear business language</li><li>Build strong relationships across functions, cultures, and geographies</li><li>Support organizational change and long-term capability building</li></ul><p><b>What We're Looking For</b></p><br><p><b>Experience</b></p><br><ul><li>Minimum 10 years of experience in Data Architecture, Data Management, Analytics, AI, Digital Transformation, or related disciplines</li><li>Proven experience leading enterprise-wide Data &amp; AI transformation programs</li><li>Experience within manufacturing, marine, shipbuilding, offshore, construction, engineering, energy, utilities, or similar asset-intensive industries</li><li>Demonstrated success in improving organizational data maturity and business adoption</li><li>Experience combining strategic consulting with practical hands-on implementation</li><li>Experience working within complex international organizations</li></ul><p><b>Technical Expertise</b></p><br><ul><li>Enterprise Data Architecture</li><li>Enterprise Data Modelling (Conceptual, Logical &amp; Physical)</li><li>Data Governance &amp; Master Data Management</li><li>Data Quality Management</li><li>Microsoft Azure</li><li>Microsoft Fabric</li><li>Databricks</li><li>Microsoft Purview</li><li>AI &amp; Advanced Analytics</li><li><b>DAMA-DMBOK and/or TOGAF</b></li><li>Enterprise platforms such as SAP, Workday and Salesforce</li></ul><p><b>Personal Attributes</b></p><br><ul><li>Consultant mindset with strong business acumen</li><li>Strategic thinker who can also execute</li><li>Excellent stakeholder management and influencing skills</li><li>Strong communication and facilitation capabilities</li><li>Pragmatic, hands-on, and outcome-oriented</li><li>Comfortable working in complex, evolving environments</li><li>Passionate about helping organizations accelerate their Data &amp; AI maturity journey</li></ul><p><b>Why Join Damen?</b></p><br><p>At <b>Damen</b>, you will have the opportunity to make a real impact by helping shape the future of Data &amp; AI within a global maritime leader that is actively investing in digital transformation and data-driven decision-making. You will collaborate with business and technology stakeholders across multiple countries, functions, and business units, working on initiatives that influence how data and AI are embedded into day-to-day operations. As part of a growing Data &amp; AI function, you will benefit from strong executive sponsorship, strategic investment, and the opportunity to play a key role in accelerating our organization's data maturity journey. This is a unique chance to combine innovation, transformation, and practical business value creation while working in a collaborative environment that encourages entrepreneurship, ownership, continuous improvement, and professional growth. Ultimately, your work will help build the foundation for Damen to become a truly data-powered and AI-enabled enterprise.</p><br><p><b>Ideal Candidate Profile</b></p><br><p>The ideal candidate is currently working as a <b>Data Transformation Lead, Enterprise Data Architect, Data Strategy Consultant, Digital Transformation Consultant, Head of Data Governance, Data Management Lead, or similar role </b>within a complex industrial organization and has successfully helped transform data capabilities from a developing stage into a mature, scalable, enterprise-wide function. This individual combines consulting skills, business acumen, architecture expertise, and transformation leadership to deliver lasting organizational impact.</p><br> </div>

<ul><li>Provide first-line support for hardware, software, and network-related issues via phone, email and in-person</li><li>Diagnose and fix issues of end user systems related to Operating Systems, Internet Browsers (ie. Explorer), MS Office & MS products (Word, Excel, PowerPoint, Outlook etc.), Local Area Network connectivity, Wireless connectivity, First Level Hardware diagnosis, Printing issues, Software Installation, PC relocation and minor changes, Peripheral device connectivity or device driver</li><li>Manage and maintain IT assets, including computers, printers, and other peripheral devices</li><li>Install, upgrade and configure operating systems and software applications, ensuring compliance with the company policies</li><li>Monitor software licensing and provide necessary updates for compliance and security</li><li>Assist in maintaining network connectivity, including troubleshooting connectivity issues and performing basic network configuration</li><li>Conduct routine system and network monitoring to identify and resolve potential issues before they impact users</li><li>Support larger IT projects as needed, providing input and assistance during implementation</li><li>Collaborate with other IT teams to identify trends and improve infrastructure and service delivery</li><li>Monitor system screens for error messages or alerts</li><li>Ensure uninterrupted system operation</li><li>Ensure industry and local physical security processes are followed</li><li>Ensure schedules finish on time to meet service level agreements</li><li>Log errors and resolutions to prevent system bottlenecks</li><li>Close incident records within defined timeline</li><li>Determine severity and prioritization classification for the Incident</li><li>Identify/associate related incidents</li><li>Initiate Request for Change (RFC) record, if needed</li><li>Manage Incidents to resolution</li><li>Perform Incident diagnostics</li><li>Resolve incidents and restore service</li><li>Conduct root cause analysis</li><li>Coordinate problem resolution</li><li>Determine need for additional resources and assign to correct service provider</li><li>Develop innovative solutions</li><li>Escalate issues to ensure proper sense of urgency / resource allocation</li><li>Perform full system and data back-ups of all required data and architecture</li><li>Manage user accounts on the system</li><li>Perform regular system checks and housekeeping</li><li>Repair/update hardware, software and operating systems</li><li>Install / configure application software</li><li>Effectively and efficiently troubleshoot system problems</li><li>Consistently fix system problems with minimal downtime</li><li>Proactively identify system upgrades to enhance the services offered to the client</li><li>Analyse/review Request and determine if escalation is needed</li><li>Apply ITIL framework</li><li>Determine severity and prioritization classification for the Request</li><li>Escalate issues to ensure proper sense of urgency / resource allocation</li><li>Manage Requests end-to-end, from Request registration, routing, recording/documentation, rejection and un-routing</li><li>Work collaboratively with organizational peers</li><li>Monitor and resolve all ticket escalations within your area of responsibility</li><li>Establish strong relationships with the client and their leadership by following through on requests, resolving escalations and providing status in a consistent and timely manner</li><li>Understand and practice information security fundamentals covering confidentiality, integrity and availability of information in SIBCA organization</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s Degree in Computer Engineering, Computer Science or a relevant field</li><li>MCSE or CCNA certifications preferred</li><li>Good understanding of MS Windows 7 and other Microsoft client operating systems</li><li>Working and conceptual knowledge of networking basics</li><li>Ability to manage end users’ expectations and keep them satisfied</li><li>Excellent team worker</li><li>Proficient (Read, Write, Speak) in English</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The position holder is responsible for executing the production planning schedule, resource allocation and material planning for processing section. Ensuring the products meet the quality standards, costs, and production plan in compliance with food, health and safety regulations.</p><p>1. Preparing mixing &amp; processing plan weekly, based on weekly production plan.</p><p>2. Assist production manager in preparing annual operating expense budget and monitoring of expenses monthly basis and reporting. Providing inputs for annual capex requirements.</p><p>3. To drive processing plant operation to ensure to adhere to the defined production plan.</p><p>4. Develop and maintain all necessary reporting to assess the production performance.</p><p>5. Ensure compliance with NFPC standard for cost control, waste reduction, quality, safety, and complete on-time delivery at lowest possible cost.</p><p>6. Ensure all records of ingredients receiving, mixing, pasteurization/UHT Treatment, buffer storage and handing over to Aseptic Filling Section and Fresh filling Section are maintained as per set procedure.</p><p>7. To maintain chemical parameters of all products as per defined specification and close to zero% processing loss and 100% yield of the batch till buffer storage.</p><p>8. Shall be responsible for effective and efficient running of overall production operations.</p><p>9. Controlling all possibilities for reduction of Operation Cost by 3M Factor. (Manpower Utilization, Material Utilization, Machine Utilization)</p><p>10. Ensuring adherence to procedure though audits and updating SOP’s whenever necessary</p><p>11. Conduct investigations of NCNs, Complaints to understand root cause and provide workable solutions and opportunities for improvements.</p><p>12. Responsible for implementation of GMP and compliance ISO &amp; HACCP</p><br><p><strong>KEY PERFORMANCE INDICATORS</strong></p><p><strong>1.</strong> Product Quality (prevention of defective product mixing or processing) &amp; Health &amp; Safety incidents.</p><p><strong>2.</strong> Adherence to production schedule planned vs actuals</p><p><strong>3.</strong> Number and success of new initiatives implemented</p><p><strong>4.</strong> 100% volumes Plan and Supply of Processed Products to Filling Sections based on Demand, provided by DP.</p><p><strong>5.</strong> Reduction of Mixing, Processing Losses to minimum level/substandard products/rework/scrap.</p><p><strong>6.</strong> CIP Chemical Consumption minimization by proper planning to reduce number of CIP’s per shift</p><p><strong>7.</strong> To optimize Utilities (Water, Electricity, Chilled Water, Steam) consumption by effective prod. Planning.</p><p><strong>8.</strong> Reduction of Employees Cost per Litre of Product.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualification/s</strong></p><p>Bachelor of Dairy Technology.</p><p><strong>Experience</strong></p><p>05 years of related experience of which (minimum) of 3 years should be in similar position/responsibility preferably in a similar industry/large scale dairy and juice manufacturing plants</p><p>*Previous experience/strong understanding of budgeting/expense management with a basic understanding off financial and accounting practices.</p><p>*Strong computer skills including the ability to prepare spreadsheets and use MS Office Products (Word, Excel, Power Point and/or Access) to analyse data and trends &amp;ERP Application.</p><p>.*Previous experience/best practices implementing and using continuous improvement/lean tools to drive improvements.</p><p>*Previous experience/broad understanding of HSE safety systems and enforcement of safety rules and policies.</p><p></p></section>

Our engineers are the technical visionaries behind our innovative solutions. Globally recognized for delivering cutting-edge systems, you’ll tackle complex challenges, collaborate across functions, and lead advancements that shape our industry. Supported by a culture of flexibility, growth, and innovation, join us to create a lasting legacy in safety and simulation.<br><br>Description<br><br>Support Flight Simulator Training Devices and Cabin Crew Training Devices, including attending maintenance calls, device setup, conversions and demos. Assist during SFTs / PVCs and perform snag clearance. Independently carry out Preventive Maintenance Tasks (PMTs) and Daily Readiness (DR) on training devices and associated systems. Ensure PMTs are completed according to standards, properly signed off, and that all generated deficiencies are followed up and closed in a timely manner. Ensure all recurrent QTG runs are completed; action and follow up on all deficiencies. Troubleshoot QTG‑related issues and collaborate with the QTG specialist and senior colleagues as needed. Diagnose, troubleshoot, and resolve technical issues on training devices and promptly update related DRs. Support senior colleagues during AOG situations and maintain strong communication with logistics, scheduling, and training teams to ensure smooth training delivery. Monitor Simissues and action/update items assigned to the on‑site team. Perform required tests and provide clear, concise feedback. Coordinate with senior colleagues to ensure Snags and SPRs are actioned within SLA timelines. Use the Maintenance Management System to record, track, and review maintenance activities. Comply with local and global CAE Environmental Health & Safety (EHS) standards and safe‑working procedures, demonstrating strong duty of care for personal and team safety.<br><br>Minimum Qualifications<br><br>Technical College Diploma or Degree in Electronics, Electrical, or Aviation field.3–5 years of relevant work experience. Excellent spoken and written English. Demonstrated initiative and ability to work under minimal supervision. Ability to work flexible shifts and adapt to changing schedules and shift patterns. Suitable understanding of aircraft terminology and simulation training devices. Ability to interpret schematics and technical documents relevant to simulation devices. Knowledge of analog and digital principles and theory. Troubleshooting skills for electronic, electrical, hydraulic, and pneumatic systems. Skilled in the use of test equipment and software diagnostic tools. Basic understanding of avionics, motion, and visual systems. Good computer skills, including Microsoft Office (Word, Excel, etc.). Basic knowledge of computer mainframe/architecture, networking, and operating systems (Windows NT/XP, UNIX, Linux, AIX).<br><br>Preferred Qualifications<br><br>Highly engaged and motivated individual. Strong customer orientation and ability to manage sensitive situations tactfully. Strong workmanship and ability to contribute effectively within a team environment.<br><br>LI-JK1<br><br>About CAE<br><br>At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we’ve driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success.<br><br>Position Type <br><br>Regular<br><br>Equal Opportunity & Accommodations<br><br>CAE is committed to providing equal opportunities to all applicants, regardless of race, nationality, color, religion, sex, gender identity or expression, sexual orientation, disability, neurodiversity, veteran status, age, or other characteristics protected by law. We encourage applicants who may not meet every qualification to apply. Reasonable accommodations are available—contact your recruiter or email CAECarrieres-Careers@cae.com if needed.<br><br>Data Privacy<br><br>Privacy Statement | CAE<br><br>As part of our process, we may use AI‑supported tools to help review applications, with human decision‑making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.