Packing & Packaging Technician Jobs in UAE

Job Purpose<br><br>Responsible for the maintenance, troubleshooting, repair, and inspection of facility equipment and technical systems. The position supports operational continuity by minimizing equipment downtime, maintaining safety standards, and ensuring all assets operate efficiently and reliably. Working closely with maintenance teams, contractors, and operational stakeholders, the role contributes to the overall performance and upkeep of company facilities. How you will make an impact<br><br>(Key Responsibilities)<br><br> Maintenance Operations & Technical Support Perform installation, maintenance, troubleshooting, and repair of electrical, mechanical, HVAC, plumbing, and related facility systems. Carry out preventive and corrective maintenance activities in accordance with approved schedules, technical standards, and manufacturer recommendations. Diagnose equipment faults, identify root causes, and implement effective corrective actions. Respond promptly to breakdowns, service requests, and emergency maintenance requirements. Support equipment installation, testing, commissioning, relocation, and modification activities. Equipment Reliability & Operational Efficiency Conduct routine inspections, site rounds, and condition monitoring to ensure safe and efficient operation of equipment and systems. Monitor equipment performance and identify potential failures before they impact operations. Recommend improvements and corrective measures to enhance equipment reliability and efficiency. Minimize downtime through timely maintenance, troubleshooting, and repair activities. Coordinate with technicians, contractors, and operational teams to complete maintenance work efficiently. Safety, Compliance & Asset Care Follow approved maintenance procedures, permit-to-work requirements, health and safety standards, and company policies at all times. Ensure compliance with applicable safety, quality, and regulatory requirements. Maintain tools, equipment, spare parts, and work areas in a safe, organized, and serviceable condition. Report unsafe conditions, hazards, incidents, and equipment abnormalities promptly. Maintain a clean and safe working environment across all assigned areas. Reporting & Continuous Improvement Maintain accurate records of maintenance activities, inspections, repairs, fault reports, and material usage. Update work orders, maintenance logs, and asset records as required. Provide technical support and guidance to junior technicians when required. Support continuous improvement initiatives aimed at enhancing maintenance effectiveness and operational performance. Contribute to the achievement of maintenance, reliability, and operational KPIs.<br><br>Qualifications & Skills<br><br> Diploma, ITI, or Certificate in Electro-Mechanical, HVAC, Electrical Engineering, Mechanical Engineering, or a related technical discipline. 1-5 years of experience in Facilities Management, Building Maintenance, or Technical Services environments. Hands-on experience with HVAC systems, electrical controls, booster and transfer pump control panels, and plumbing systems. Strong troubleshooting and fault-diagnosis capabilities across multiple technical disciplines. Ability to read and interpret technical drawings, schematics, manuals, and equipment documentation. Good knowledge of preventive and corrective maintenance practices.  Proficiency in using hand tools, power tools, testing instruments, and diagnostic equipment. Strong awareness of workplace health, safety, and maintenance compliance requirements. Basic computer skills for maintenance reporting and work order management. Good communication, teamwork, and time management skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong><u><span>Job Purpose:</span></u></strong></p><br> <p><span>The position will support HVAC operation, preventive maintenance, troubleshooting, and compliance activities across cleanrooms and production facilities.</span></p><br> <u><span>Key Responsibilities:</span></u> <ul> <li><span>Assist in maintenance and operation of HVAC systems, AHUs, FCUs, exhaust systems, and chilled water systems</span></li> <li><span>Support preventive and corrective maintenance activities</span></li> <li><span>Monitor HVAC parameters and report abnormalities</span></li> <li><span>Assist in filter replacement, cleaning, and basic troubleshooting</span></li> <li><span>Support cleanroom environmental compliance and GMP requirements</span></li> <li><span>Coordinate with supervisors and maintenance teams during shutdowns and maintenance activities</span></li> <li><span>Follow safety and pharmaceutical GMP procedures at all times</span></li> </ul> <u><span>Education &amp; Experience:</span></u> <ul> <li><span>Diploma / Technical qualification in Mechanical or HVAC field</span></li> <li><span>1–3 years of experience in HVAC maintenance</span></li> <li><span>Experience in pharmaceutical, healthcare, or cleanroom facilities is preferred</span></li> <li><span>Basic understanding of HVAC systems and tools</span></li> <li><span>Good communication and teamwork skills</span></li> <li><span>Willingness to work in shifts if required</span></li> </ul> <u><span>Preferred Skills:</span></u> <ul> <li><span>Knowledge of cleanroom HVAC systems</span></li> <li><span>Understanding of preventive maintenance practices</span></li> <li><span>Familiarity with cGMP environment is an advantage</span></li> </ul> </div>

???? RECRUITMENT DRIVE – 390 OPENINGS ???????? URGENT HIRING | IMMEDIATE JOINING ???????? 390 Vacancies Available✅ Visa Provided✅ Employment as per UAE Labour Law✅ Immediate Joining???? CONTACT TODAY:+971-541453955???? Whats App:+91-8904689334

<p>Job Summary</p><p>The Site Technical Manager – Architecture will oversee architectural site execution, technical coordination, and quality compliance for construction projects. The role involves ensuring that architectural works are implemented according to design specifications, project schedules, and regulatory standards, while coordinating with consultants, contractors, and multidisciplinary teams.</p><p>Key Responsibilities</p><ul><li><p>Manage and supervise architectural works at the construction site, ensuring compliance with approved drawings and specifications</p></li><li><p>Review architectural drawings, shop drawings, and material submittals before site implementation</p></li><li><p>Coordinate with consultants, contractors, structural, MEP, and project management teams to resolve technical issues</p></li><li><p>Ensure compliance with local authority regulations, building codes, and safety standards</p></li><li><p>Monitor quality control and site inspections to ensure architectural finishes and materials meet project specifications</p></li><li><p>Provide technical guidance to site engineers and contractors regarding architectural design details and construction methods</p></li><li><p>Identify and resolve design discrepancies, site clashes, and technical challenges</p></li><li><p>Review method statements, RFIs, and technical submissions related to architectural works</p></li><li><p>Support project management in schedule planning and progress monitoring</p></li><li><p>Ensure adherence to health, safety, and environmental regulations at the construction site</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications</p><ul><li><p>Bachelor’s Degree in Architecture (mandatory)</p></li><li><p>Master’s Degree in Architecture or Construction Management (preferred)</p></li></ul><p>Experience Requirements</p><ul><li><p>Minimum 10 years of architectural experience</p></li><li><p>At least 5 years in site-based architectural management roles</p></li><li><p>Experience in high-rise buildings, commercial projects, hospitality, or large-scale developments preferred</p></li><li><p>Strong knowledge of construction drawings, materials, and finishing standards</p></li></ul><p>Technical Skills</p><ul><li><p>Proficiency in AutoCAD, Revit, and BIM coordination</p></li><li><p>Strong understanding of architectural detailing and construction methodologies</p></li><li><p>Knowledge of UAE building regulations and authority approvals</p></li><li><p>Ability to manage technical coordination across multiple disciplines</p></li></ul><p>Required Certifications (Preferred in UAE)</p><ul><li><p>PMP (Project Management Professional) – highly preferred for managerial roles</p></li><li><p>LEED Green Associate / LEED AP – for sustainable building projects</p></li><li><p>Dubai Municipality / Trakhees / DDA approvals knowledge</p></li><li><p>IOSH or NEBOSH certification – health & safety awareness</p></li><li><p>RIBA Membership or equivalent professional architecture accreditation (advantage)</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision. Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work. Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed. Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem. Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation, Pressure, temperature, level, &amp; flow measuring devicesPneumatic &amp; Hydraulic valve actuation systemsCO2 Fire Protection systemsInfrared Gas Detection systemsWorking under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms.Skills:Must be able to read and understand engineering drawings and manuals.Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul><p></p></section>

<ul><li><p>Microbiology technicians record detailed observations and test results accurately. They maintain meticulous records of experiments and contribute to data analysis under the guidance of senior microbiologists.&nbsp;</p></li><li><p>Provide support to microbiologists and researchers by assisting in experimental procedures, literature reviews, and data interpretation. They may also contribute to ongoing research projects by conducting experiments and analysing results.&nbsp;</p></li><li><p>Participate in quality control procedures to ensure the accuracy and reliability of laboratory results. This involves following standardized protocols, calibrating equipment, and maintaining laboratory hygiene and safety standards.&nbsp;</p></li><li><p>Performs other related duties as may be assigned either in support of division goal or for his/her personal or professional training, education or development as programmed by laboratory manager.&nbsp;</p></li><li><p>All work to be carried out in accordance with the Company Health, Safety, Environmental and Quality Systems.&nbsp;</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Proficiency in basic laboratory techniques such as aseptic technique, pipetting, sample preparation, microscopy, and sterile technique is essential. Technicians should be adept at handling laboratory equipment and following standard operating procedures (SOPs)&nbsp;</p></li><li><p>Must understand good aseptic techniques, workplace health, safety and environmental responsibilities.&nbsp;</p></li><li><p>Carrying out standard microbiological analysis by culture methods such as most probable number (MPN)&nbsp;</p></li><li><p>Experience in use of molecular microbiology methods (MM) such as DNA extraction / purification, PCR and qPCR and other techniques is an advantage.&nbsp;</p></li><li><p>Preparing microbiological cultures and growth media, and also chemical samples and test solutions using general chemical laboratory techniques such as; use of micropipettes, 4 figure balances, dilution methods and calculation of solution concentrations&nbsp;</p></li><li><p>Preparation, maintenance, and operation of a variety of laboratory equipment including wet chemistry meters, autoclaves, incubators, centrifuges and others.&nbsp;</p></li><li><p>Preparation of samples for examination including microscopy and photography of samples and some chemical analysis techniques&nbsp;</p></li><li><p>Safe handling and use of hazardous and non-hazardous bottled gases including hydrogen sulfide.&nbsp;</p></li><li><p>Maintaining accurate records of analysis, observations, and calculations. Compile and complete laboratory test sheets and analysis reports.&nbsp;</p></li><li><p>Perform duties in compliance at all times with corporate and local systems, rules and procedures, including any Quality Assurance, Risk Assessments, Health Safety and Environmental Standards (for example, UKAS ISO 17025, ISO 9001, ISO 14001 and OHSAS 18001) set by the Company and/or external certification authorities.&nbsp;</p></li><li><p>Actively participate and follow company’s HSE, Compliance, Quality Assurance and other business control requirements (Compliance & Code of Ethics) which are mandatory or voluntary.&nbsp;</p></li><li><p>Apply discretionary effort in support of the smooth running of projects and the laboratories.&nbsp;</p></li><li><p>On the job training will be provided but some experience with microbiology and general laboratory practices would be an advantage&nbsp;</p></li></ul><p><strong>Qualifications, Experience, Skills and Knowledge:&nbsp;</strong></p><ul><li><p>Diploma or Degree program in Microbiology, Biochemistry or Similar Biomedical Science as a minimum.&nbsp;</p></li><li><p>Knowledge in oilfield microbiology and/or molecular microbiology will be an advantage.&nbsp;</p></li><li><p>Should have completed their studies (i.e. currently not enrolled in fulltime studies)&nbsp;</p></li><li><p>Experience: min 1 year experience in laboratory environment.&nbsp;</p></li><li><p>Must be able to read, understand and follow work instructions in a safe, accurate and timely manner and ensure full compliance with the Company Health, Safety, Environmental and Quality Systems.&nbsp;</p></li></ul><br><br><br><p><br></p>

At Bond Interiors, we specialize in delivering high-quality interior fit-out and turnkey solutions across commercial, retail, hospitality, and residential sectors. Since our establishment, the company has steadily grown into one of the region’s trusted fit-out partners, successfully delivering a wide range of projects across the UAE through a commitment to quality, innovation, and client satisfaction. Over the years, Bond Interiors has built a strong reputation for excellence in execution, craftsmanship, and timely project delivery. Our continued growth has been driven by long-term client relationships, a skilled workforce, and the ability to adapt to evolving market demands and design trends. With a dynamic and collaborative work culture, Bond Interiors offers professionals the opportunity to work on prestigious projects, develop their careers, and contribute to a fast-growing organization that values talent, performance, and continuous improvement.<br><br>Position Title: Senior Technical Architect Interior Fit-Out, Joinery, Glass, Metal & MEP Coordination<br>Job Purpose The Senior Technical Architect is responsible for leading and managing all technical and design coordination aspects of high-end interior fit-out projects, including joinery, glass, metal works, architectural finishes, and MEP integration. The role involves reviewing project requirements from tender and BOQ stage through execution and handover, ensuring full technical compliance, constructability, coordination, and timely approvals from clients and consultants. The Senior Technical Architect acts as the primary technical interface between design consultants, clients, project management teams, subcontractors, factory production teams, and site execution teams to ensure smooth delivery of projects in accordance with approved designs, specifications, budgets, and timelines.<br>Job Responsibilities Lead technical coordination for interior fit-out projects involving architectural finishes, joinery, glass, metal, and MEP systems. Study project BOQs, specifications, tender documents, IFC drawings, and contract requirements to fully understand project scope and technical deliverables. Lead the preparation, review, and coordination of shop drawings, detailed technical drawings, coordinated ceiling layouts, builder’s work drawings, and as-built documentation. Manage and monitor SD logs, material submittal logs, RFI logs, sample approvals, and technical tracking schedules. Review design intent and ensure technical feasibility, constructability, and compliance with project requirements. Coordinate architectural, structural, interior, joinery, and MEP disciplines to eliminate clashes and ensure smooth project execution. Oversee detailed joinery design coordination including custom furniture, wall cladding, feature elements, counters, wardrobes, vanities, decorative ceilings, and specialized finishes. Coordinate glass and metal works including partitions, balustrades, decorative metal screens, cladding systems, fabricated architectural elements, and bespoke installations. Ensure proper integration of MEP services with ceilings, joinery, architectural finishes, and interior elements. Liaise directly with clients and consultants to discuss technical comments, design revisions, material approvals, and drawing reviews. Lead consultant and client coordination meetings to finalize approvals and close technical comments within project timelines. Ensure all technical submissions, shop drawings, and material approvals are properly reviewed and approved before production and installation. Coordinate with factory production teams and suppliers to ensure fabrication details align with approved drawings and site conditions. Conduct technical site inspections to verify quality, dimensions, installation standards, and compliance with approved drawings and specifications. Support project teams in resolving technical and site-related issues efficiently. Monitor technical progress and support project management teams in achieving project milestones and handover requirements. Participate in value engineering initiatives and provide alternative technical solutions while maintaining design intent and quality standards. Ensure compliance with local authority regulations, consultant standards, QA/QC requirements, and health & safety procedures. Mentor and guide junior technical staff, coordinators, and draftsmen where applicable. Prepare technical reports, progress updates, coordination records, and management presentations as required.<br>Qualifications & Experience Bachelor’s degree in Architecture, Interior Design, or related technical field.7–12 years of experience in high-end interior fit-out and technical coordination within the UAE/GCC. Strong background in architectural detailing, joinery, glass, metal works, and MEP coordination. Proven experience handling luxury commercial, hospitality, retail, workplace, F&B, and residential fit-out projects. Strong knowledge of fit-out construction methodologies, fabrication processes, and site execution practices. Extensive experience dealing with clients, consultants, subcontractors, suppliers, and authority approvals. Ability to independently manage technical coordination from design stage through project completion. Experience working with leading fit-out contractors or design & build companies in the UAE. Familiarity with factory production coordination and bespoke joinery manufacturing workflows. UAE driving license preferred. Ability to manage multiple fast-track projects simultaneously.<br>Technical Skills Advanced proficiency in Auto CAD and technical drawing review. Strong understanding of shop drawing production, detailing standards, and technical documentation. Ability to review and interpret BOQs, specifications, contracts, and IFC drawings. Strong knowledge of MEP coordination and ceiling/service integration. Familiarity with authority regulations, QA/QC documentation, and fit-out approval procedures in Dubai/UAE. Proficiency in Microsoft Office and document management systems. Knowledge of Revit, Sketch Up, or BIM coordination is an advantage.

<p>A reputable company is hiring a Pipe Fitter to install, assemble, maintain, and repair piping systems according to technical drawings, project specifications, and safety requirements. The ideal candidate should have practical fitting skills and be able to work effectively as part of a site team.</p> <p>Responsibilities:</p> <p>Install and assemble pipes, fittings, valves, and related components.<br /> Read and interpret basic piping drawings and layouts.<br /> Measure, cut, thread, bend, and fit pipes as required.<br /> Align and connect piping systems accurately.<br /> Install supports, brackets, and pipe hangers.<br /> Inspect piping installations for leaks, alignment, and proper connections.<br /> Assist with pressure testing and system inspections.<br /> Identify damaged or faulty pipes and fittings and carry out repairs.<br /> Coordinate with welders, plumbers, technicians, and site supervisors.<br /> Follow project specifications, quality standards, and safety procedures.<br /> Maintain tools and equipment in good working condition.<br /> Keep the work area clean and organized.</p> <p>Requirements:</p> <p>Previous experience as a Pipe Fitter is preferred.<br /> Knowledge of different types of pipes, fittings, valves, and tools.<br /> Ability to read basic piping drawings.<br /> Good measuring, cutting, and fitting skills.<br /> Physically fit and comfortable working on construction or industrial sites.<br /> Ability to follow instructions and work as part of a team.<br /> Relevant trade certificate or technical qualification is an advantage.<br /> Freshers with basic technical training may be considered for suitable entry-level roles.</p> <p>Interested candidates are encouraged to send their updated CV to hr.globale@gmail.com</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Receive work assignments and job cards from the Supervisor and ensure a clear understanding of the required work before commencing.</p></li><li><p>Diagnose Vehicle A/C faults and carry out repairs within the allocated timeline while maintaining high-quality workmanship.</p></li><li><p>Identify and report any additional defects, repair requirements, or non-conformities to the Supervisor and ensure all findings are documented on the job card.</p></li><li><p>Notify the Supervisor of any spare parts, materials, or consumables required to complete the assigned work.</p></li><li><p>Refer to technical manuals, engineering drawings, repair procedures, and manufacturer documentation to ensure repairs and installations are performed correctly.</p></li><li><p>Ensure repaired vehicles &nbsp;systems are properly tested, and functioning before vehicle handover.</p></li><li><p>Maintain the cleanliness and presentation of the vehicle after completing all repair and installation activities.</p></li><li><p>Follow manufacturer specifications, company procedures, and approved installation standards at all times.</p></li><li><p>Comply with all Quality, Health, Safety, and Environmental Management System (QHSEMS) policies, procedures, and safety regulations.</p></li><li><p>Maintain a clean, safe, and organized work area and ensure all tools and equipment are cleaned and stored properly after use.</p></li><li><p>Maintain workshop tools and equipment in good working condition and promptly report any damaged or missing items.</p></li><li><p>Perform any other duties assigned by the Line Manager that are within the scope of the role and the employee's qualifications and competencies.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>High School Diploma or equivalent required; Vocational training in automotive technology preferred.</p></li><li><p>Proficiency in using automotive diagnostic software, scan tools, and manifold gauges.</p></li></ul><p></p></section>

Performing assigned civil works services such as painting, gypsum, masonry and carpentry as per the schedule from the Civil Works Supervisor. Ensure to Follow health and safety standards and procedures at all times Immediately report concerns, issues, complaints to Supervisor for appropriate intervention. Provides technical assistance to the property handled to ensure that all works related to civil works are in good condition by fixing them <br><br>Perform other duties as assigned by the Direct Manager.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities:</p><ul><li><p>Installation of Android Infotainment Systems (OEM &amp; Aftermarket)</p></li><li><p>Fitting of Dash Cameras &amp; Driving Recorders</p></li><li><p>Installation of Reverse Cameras &amp; Parking Sensors</p></li><li><p>Installation &amp; calibration of 360° Camera Systems</p></li><li><p>Handling vehicle wiring, electrical connections &amp; troubleshooting</p></li><li><p>Ensuring clean finishing and professional installation standards</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidate Profile:</p><ul><li><p>Minimum 1+ year experience in automotive accessories / auto electrical work</p></li><li><p>Hands-on experience in multi-brand vehicles</p></li><li><p>Ability to work independently with minimal supervision</p></li><li><p>Experience in UAE/GCC is a strong advantage</p></li><li><p>Immediate joiners preferred</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Storage, Backup &amp; Cloud Infrastructure Specialist (1) Expertise: • Dell EMC • SAN • NAS • Enterprise Backup Platforms • Disaster Recovery • Business Continuity • Microsoft Azure • Azure Local • Oracle Cloud Infrastructure Responsible for storage, backup, recovery, resilience, capacity planning, and cloud infrastructure support.<br></p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a talented CAFM Specialist / CAFM Technical Support Specialist to join a leading Ministry in the UAE.<br> The ideal candidate will have hands-on experience in dedicated support resources, to operate and provide technical support for its existing CAFM system.<br> This is an excellent opportunity to contribute to large-scale digital transformation initiatives within a dynamic government environment.<br> Contract Period: 9 - 12 Months The main responsibilities will include: CAFM system administration and configuration.<br> Asset management and preventive planned maintenance management.<br> Work order workflow setup, monitoring, and administration.<br> Help desk support and service request management.<br> Preparation of KPI and SLA performance reports.<br> User support, troubleshooting, and resolution of technical issues.<br> Coordination with the current CAFM system provider, Rosmiman.<br> Supporting system users and ensuring smooth daily operation of the platform.<br> Monitoring data quality, system performance, and operational compliance.<br> Preparing periodic reports and maintaining accurate system records.<br> The preferred candidates should have: Proven 5 years of experience working with CAFM or facilities management systems.<br> Strong knowledge of asset management, PPM, work orders, help desk operations, KPIs, and SLAs .<br> Experience in CAFM system administration and user support .<br> Good technical troubleshooting and reporting skills.<br> Strong communication and stakeholder coordination abilities.<br> Experience with R osmiman CAFM would be a strong advantage.<br> Good English communication skills; Arabic would be an advantage.<br> Availability to join within a short period.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

Company Description ALUMINIUM TRADE TEST CENTRE is a specialized facility focused on evaluating and developing skills in aluminium fabrication and installation. Based in Dubai, the centre supports the construction and manufacturing sectors by providing reliable technical assessments and training. The organization works closely with employers to ensure technicians meet industry standards for quality, safety, and performance. Team members benefit from exposure to diverse projects, modern tools, and opportunities to refine their technical expertise in aluminium systems.<br>Role Description ALUMINIUM TECHNICIANS at ALUMINIUM TRADE TEST CENTRE perform hands-on work related to aluminium fabrication, assembly, and installation for doors, windows, curtain walls, and other architectural systems. Day-to-day tasks include reading and interpreting technical drawings, measuring and cutting aluminium profiles, operating fabrication equipment, and assembling units according to specifications. Technicians are responsible for on-site fitting, alignment, and finishing, as well as inspecting completed work for quality and safety compliance. The role also involves basic maintenance of tools and machines, adherence to workplace safety procedures, and collaboration with supervisors and colleagues to meet project deadlines and standards. This is a full-time, on-site role based in Dubai.<br>Qualifications<br> <br>Demonstrated experience in aluminium fabrication, cutting, drilling, and assembly for doors, windows, and façade systems. Ability to read and interpret technical drawings, measurements, and specifications accurately. Competence in using hand tools and power tools, such as saws, drills, grinders, and measuring instruments. Knowledge of installation techniques for aluminium frames, glass fitting, sealing, and finishing works. Understanding of workplace safety practices, including proper use of personal protective equipment and safe handling of materials. Strong attention to detail, quality-focused mindset, and ability to identify and correct defects in fabricated or installed units. Ability to work independently and as part of a team, with reliable time management and problem-solving skills. Previous experience in aluminium workshops, construction sites, or related trades; trade certification or vocational training in aluminium or metal works is an advantage. Willingness to work on-site in Dubai, with flexibility to meet project schedules and physical ability to perform manual tasks.

Position Objectives:The Technical Support Engineer will provide technical, application, and operational support for the Bonya platform during project delivery, testing, rollout, and post-go-live stabilisation. The role will support users, investigate incidents, assist with configuration, monitor platform behaviour, coordinate with development and infrastructure teams, and help ensure smooth adoption of the system.<br>Job Description and Responsibilities Provide first-level and second-level support for Bonya users during UAT, pilot, rollout, and production stabilisation. Log, triage, investigate, assign, and track incidents, service requests, defects, and user queries. Support user access, role assignment, password/SSO issues, workflow issues, and configuration-related support requests. Reproduce reported defects and provide a clear technical analysis to developers and testers. Monitor application behaviour, system logs, job failures, integration errors, and performance issues. Support data import/export activities, report generation, user administration, and routine operational tasks. Assist with deployment validation, smoke testing, release verification, and environment checks. Prepare support guides, FAQs, knowledge base articles, and user support documentation. Participate in hyper care and post-go-live support. Escalate issues to infrastructure, development, database, integration, or security teams as required.<br>Qualification and Required Skills Diploma or Bachelor’s degree in Information Technology, Computer Science, Information Systems, or a related field.3+ years of experience in application support, technical support, systems support, or service desk escalation roles. ITIL Foundation or equivalent service management certification is desirable. Experience supporting ERP, CRM, workflow, service management, or custom enterprise applications. Experience with Odoo or similar enterprise platforms is desirable. Basic understanding of Linux, Postgre SQL, web applications, APIs, logs, user roles, and access control. Experience working with ticketing tools, incident management processes, and SLA-based support. Experience supporting UAT, go-live, and hyper care activities is advantageous.

<ul><li><p>Attend interviews and technical assessments on behalf of the company/client for candidates applying to Civil and MEP trade positions.</p></li><li><p>Evaluate candidates' practical skills, tool knowledge, and theoretical understanding relevant to their specific trade.</p></li><li><p>Conduct structured trade tests/technical questioning to verify hands-on competency and job-readiness of each candidate.</p></li><li><p>Assess candidates' understanding of site practices, safety procedures, and job-specific responsibilities relevant to Civil and MEP works.</p></li><li><p>Coordinate with the Recruitment and Manpower Planning teams to align technical evaluation criteria with client requirements and project specifications.</p></li><li><p>Prepare clear, objective technical evaluation reports/scorecards for each candidate interviewed, supporting hiring decisions.</p></li><li><p>Liaise with client technical/engineering teams to stay aligned on required skill standards, grading, and evolving project needs.</p></li><li><p>Maintain up-to-date knowledge of Civil and MEP trade practices, tools, materials, and site standards across projects.</p></li><li><p>Support the onboarding process by confirming accurate trade classification and skill grading of selected candidates.</p></li><li><p>Assist Operations in identifying skill gaps within currently deployed manpower and recommend training or up skilling needs.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma in Engineering — Electrical or Mechanical (mandatory).</p></li><li><p>Minimum 3–5 years of practical/site experience across Civil and/or MEP works.</p></li><li><p>Prior experience in technical interviewing, trade testing, site supervision, or QA/QC preferred.</p></li><li><p>Strong working understanding of both Civil and MEP scope of work, and the specific job functions within each trade.</p></li><li><p>Experience within a manpower supply, contracting, or construction environment is an advantage.</p></li><li><p>Driving license is an added advantage </p><br><p>SKILLS REQUIRED</p><ul><li><p>Strong technical knowledge spanning both Civil and MEP disciplines.</p></li><li><p>Ability to objectively assess practical and theoretical competency of tradesmen across skill levels.</p></li><li><p>Good communication and interviewing skills, with the ability to explain technical findings clearly to non-technical stakeholders.</p></li><li><p>Strong attention to detail and sound, unbiased technical judgment.</p></li><li><p>Familiarity with UAE construction/manpower industry practices and standards (advantageous).</p></li><li><p>Basic computer literacy for preparing evaluation reports and maintaining candidate records.</p></li></ul></li></ul>

<ul><li><p>&nbsp;Perform preventive, predictive, and corrective maintenance on electrical systems and equipment to ensure safe, reliable, and efficient plant operation.</p></li><li><p>&nbsp;Install, inspect, test, troubleshoot, and repair LV and MV electrical equipment, including switchgear, transformers, MCCs, PCCs, distribution boards, and motor control circuits.</p></li><li><p>&nbsp;Maintain, troubleshoot, and commission Variable Frequency Drives (VFDs), soft starters, motor starters, and associated control systems.</p></li><li><p>&nbsp; Carry out maintenance, testing, and fault diagnosis of AC and DC motors, including high-pressure pumps, feed pumps, transfer pumps, dosing pumps, and auxiliary equipment.</p></li><li><p>Perform insulation resistance testing, continuity testing, phase sequence verification, earth continuity testing, and cable testing using appropriate test instruments.</p></li><li><p>&nbsp; Inspect, maintain, and repair electrical cables, cable trays, terminations, glands, and junction boxes.</p></li><li><p>&nbsp; Conduct maintenance and functional testing of protection relays, circuit breakers, contactors, overload relays, and electrical protection devices.</p></li><li><p>&nbsp; Assist in the operation, maintenance, and testing of standby generators, UPS systems, battery chargers, battery banks, and emergency power systems.</p></li><li><p>&nbsp; Perform switching, isolation, Lockout/Tagout (LOTO), and electrical permit activities in accordance with company procedures and safety regulations.</p></li><li><p>&nbsp; Read and interpret single-line diagrams (SLDs), electrical schematics, wiring diagrams, P&IDs, and OEM technical manuals.</p></li><li><p>&nbsp; Diagnose electrical faults, identify root causes, and recommend effective corrective actions to improve equipment reliability.</p></li><li><p>&nbsp; Ensure compliance with electrical safety standards, company procedures, and applicable regulations.</p></li><li><p>Maintain good housekeeping, ensure proper use of electrical test equipment and tools, and comply with all Quality, Health, Safety, Environmental, and Asset Management requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a relevant technical diploma or trade certification in Electrical Engineering Technology or equivalent.</li><li>Hold a recognized electrical journeyman or master license.</li><li>Have a minimum of 3-5 years of hands-on experience in industrial electrical maintenance.</li><li>Proficient in troubleshooting and repairing AC/DC motors, VFDs, and control systems.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>JOB PURPOSE: To trouble-shoot, repair, re-commission and maintain efficiently field instrumentation for gas turbines, steam turbines, waste heat boilers, and desalination plant and its auxiliaries to ensure efficient operation and reduce equipment availability down time. KEY ACCOUNTABILITIES: Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision.Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work.Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem.Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation: Pressure, temperature, level, &amp; flow measuring devicesPneumatic &amp; Hydraulic valve actuation systems CO2 Fire Protection systemsInfrared Gas Detection systemsWorking under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills: Must be able to read and understand engineering drawings and manuals.Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>What you will do</b><br><p>We are seeking an experienced and knowledgeable Refrigeration Service Personnel to join our Industrial Refrigeration team in the United Arab Emirates. In this role you will be reporting to the Field Line Manager and will be responsible for commissioning, servicing, troubleshooting, and maintaining refrigeration systems in various industries.</p><br><p><b>How you will do</b></p><br><ul><li><p>Conduct service and maintenance activities on IR Ammonia single and double stage systems, adhering to operational philosophies.</p><br></li><li><p>Read and understand electrical and controller drawings, as well as P&amp;ID diagrams.</p><br></li><li><p>Commission, service, and troubleshoot refrigeration systems and gas compressor units, with a preference for experience with Sabroe, Gram, and Frick units.</p><br></li><li><p>Perform testing, commissioning, and service on Danfoss valves and control systems commonly used in JCI industrial refrigeration systems.</p><br></li><li><p>Overhaul reciprocating screw compressors, preferably with experience on SABROE, GRAM, Frick, and YORK compressors.</p><br></li><li><p>Possess refrigeration knowledge and experience in controls and instrumentation, including an understanding of relay-based controls, PLCs, DCS systems, and compressor unit controllers such as Unisab, Gramatic, and Quantum.</p><br></li><li><p>Familiarity with process cooling equipment commonly used in petrochemical industries, including systems utilizing propane, Propylene and R134a refrigerants.</p><br></li><li><p>Maintain a basic understanding of the hazards associated with ammonia, propane, and H2S gases.</p><br></li><li><p>Handle, report, and communicate effectively with food and beverage and PRS customers.</p><br></li></ul><p><b>What we look for</b></p><br><ul><li><p>Proven experience and knowledge in the commissioning, servicing, and troubleshooting of refrigeration systems.</p><br></li><li><p>Hold a diploma or degree in Refrigeration and Air Conditioning.</p><br></li><li><p>Have a minimum of 6 to 8 years of hands-on field service experience.</p><br></li><li><p>Strong understanding of electrical and controller drawings, as well as P&amp;ID diagrams.</p><br></li><li><p>Familiarity with Sabroe, Gram, and Frick compressor units.</p><br></li><li><p>Proficiency in testing, commissioning, and servicing Danfoss valves and control systems.</p><br></li><li><p>Experience in overhauling reciprocating screw compressors, preferably SABROE, GRAM, Frick, and YORK compressors.</p><br></li><li><p>Solid understanding of controls and instrumentation, including relay-based controls, PLCs, DCS systems, and compressor unit controllers (Unisab, Gramatic, Quantum).</p><br></li><li><p>Knowledge of process cooling equipment and refrigerants used in petrochemical industries.</p><br></li><li><p>Basic awareness of the hazards associated with ammonia, propane, and H2S gases.</p><br></li><li><p>Excellent communication and problem-solving skills.</p><br></li></ul><br> </div>