Packing & Packaging Technician Jobs in UAE

<p>JOB PURPOSE:</p><p>The Data Center Electrical Facility Engineer will be the responsible for Data Center Engineering</p><p>Operations within a Data Center including risk management and mitigation, corrective and preventative</p><p>maintenance of critical infrastructure, vendor management and metric reporting. He is responsible for</p><p>ensuring that all Electrical, ELV, and fire/life safety equipment within the data center is operating at peak</p><p>efficiency. This involves both planned preventative maintenance of equipment, daily corrective work,</p><p>and emergency response to emergent issues. They are expected to be a singular focal point for all</p><p>Electrical related facility operations within a given data center. Data center equipment that supports</p><p>mission-critical servers must maintain better than 99.999% uptime. This equipment includes, but is not</p><p>limited to, stand-by diesel generators, switchgear, UPSs, PDUs, and building automation systems.</p><p>KEY RESPONSIBILITIES:</p><ul><li><p>Responsible for the on-site management of DC, sub-contractors and vendors, ensuring that all work</p></li></ul><p>performed is in accordance with established practices, procedures & Site local legislation.</p><ul><li><p>Establish performance benchmarks, conduct analyses, and prepare reports on all aspects of the</p></li></ul><p>critical facility infrastructure operations and maintenance.</p><ul><li><p>Generate job cards & incident management tickets for Data Center facility.</p></li><li><p>Work with DCO managers and other business leaders to coordinate projects, manage capacity, and</p></li></ul><p>optimize plant safety, performance, reliability, sustainability and efficiency.</p><ul><li><p>Establish documentation relevant to business & facility operations.</p></li><li><p>Manage routine maintenance and emergency services on a variety of critical systems such as:</p></li></ul><p>switchgear, generators, UPS systems, power distribution equipment, building monitoring systems,</p><p>etc.</p><ul><li><p>Assist in the design, implementation, commissioning and build out of new facilities.</p></li><li><p>Drive & implement projects to increase current facility capacity, efficiency, sustainability & reliability.</p></li><li><p>Management of the DC, in the provision of infrastructure & inventory asset management.</p></li><li><p>Review DC contract compliance & ensure all SLA’s are achieved.</p></li><li><p>Business interface with DC Management for day to day operational requirements.</p></li><li><p>Assist in recruiting efforts.</p></li><li><p>Manage DC to resolve of any infrastructure Electrical engineering issues.</p></li><li><p>Delivery of exceptional customer service and satisfaction.</p></li><li><p>Maintain, operate all Electrical systems and associated equipment, electrical equipment, building</p></li></ul><p>management system.</p><ul><li><p>Perform facility inspections and report on condition affecting operations</p></li><li><p>Create the Job cards in CAFM App as per Site requirements and follow up the Job cards until close</p></li></ul><p>by the Technician</p><ul><li><p>Responding promptly and efficiently to emergencies calls.</p></li><li><p>Prepare and submit Monthly reports of conditions in buildings and recommend actions to be taken</p></li><li><p>Review and understand equipment and methods of operation, Electrical systems, ELV system,</p></li></ul><p>fire/life safety, and other systems.</p><ul><li><p>Comply with all safety procedures and requirements</p></li><li><p>Maintain essential stock of spare parts.</p></li><li><p>Support any afterhours building needs and activities as required</p></li><li><p>Familiarity with datacenter guidelines and standards especially Tier III design standards and</p></li></ul><p>ASME/ASHRAE/NFPA.</p><ul><li><p>Ability to handle rotation Shifts on Monthly basis.</p></li><li><p>JOB PURPOSE:</p><p>The Data Center Electrical Facility Engineer will be the responsible for Data Center Engineering</p><p>Operations within a Data Center including risk management and mitigation, corrective and preventative</p><p>maintenance of critical infrastructure, vendor management and metric reporting. He is responsible for</p><p>ensuring that all Electrical, ELV, and fire/life safety equipment within the data center is operating at peak</p><p>efficiency. This involves both planned preventative maintenance of equipment, daily corrective work,</p><p>and emergency response to emergent issues. They are expected to be a singular focal point for all</p><p>Electrical related facility operations within a given data center. Data center equipment that supports</p><p>mission-critical servers must maintain better than 99.999% uptime. This equipment includes, but is not</p><p>limited to, stand-by diesel generators, switchgear, UPSs, PDUs, and building automation systems.</p><p>KEY RESPONSIBILITIES:</p><ul><li><p>Responsible for the on-site management of DC, sub-contractors and vendors, ensuring that all work</p></li></ul><p>performed is in accordance with established practices, procedures & Site local legislation.</p><ul><li><p>Establish performance benchmarks, conduct analyses, and prepare reports on all aspects of the</p></li></ul><p>critical facility infrastructure operations and maintenance.</p><ul><li><p>Generate job cards & incident management tickets for Data Center facility.</p></li><li><p>Work with DCO managers and other business leaders to coordinate projects, manage capacity, and</p></li></ul><p>optimize plant safety, performance, reliability, sustainability and efficiency.</p><ul><li><p>Establish documentation relevant to business & facility operations.</p></li><li><p>Manage routine maintenance and emergency services on a variety of critical systems such as:</p></li></ul><p>switchgear, generators, UPS systems, power distribution equipment, building monitoring systems,</p><p>etc.</p><ul><li><p>Assist in the design, implementation, commissioning and build out of new facilities.</p></li><li><p>Drive & implement projects to increase current facility capacity, efficiency, sustainability & reliability.</p></li><li><p>Management of the DC, in the provision of infrastructure & inventory asset management.</p></li><li><p>Review DC contract compliance & ensure all SLA’s are achieved.</p></li><li><p>Business interface with DC Management for day to day operational requirements.</p></li><li><p>Assist in recruiting efforts.</p></li><li><p>Manage DC to resolve of any infrastructure Electrical engineering issues.</p></li><li><p>Delivery of exceptional customer service and satisfaction.</p></li><li><p>Maintain, operate all Electrical systems and associated equipment, electrical equipment, building</p></li></ul><p>management system.</p><ul><li><p>Perform facility inspections and report on condition affecting operations</p></li><li><p>Create the Job cards in CAFM App as per Site requirements and follow up the Job cards until close</p></li></ul><p>by the Technician</p><ul><li><p>Responding promptly and efficiently to emergencies calls.</p></li><li><p>Prepare and submit Monthly reports of conditions in buildings and recommend actions to be taken</p></li><li><p>Review and understand equipment and methods of operation, Electrical systems, ELV system,</p></li></ul><p>fire/life safety, and other systems.</p><ul><li><p>Comply with all safety procedures and requirements</p></li><li><p>Maintain essential stock of spare parts.</p></li><li><p>Support any afterhours building needs and activities as required</p></li><li><p>Familiarity with datacenter guidelines and standards especially Tier III design standards and</p></li></ul><p>ASME/ASHRAE/NFPA.</p><ul><li><p>Ability to handle rotation Shifts on Monthly basis.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Personal Skills</p><ul><li><p>Strong English verbal and written communication skills.</p></li><li><p>Strong leadership and organizational skills.</p></li><li><p>Strong attention to detail.</p></li></ul><p>QUALIFICATIONS:</p><ul><li><p>Bachelor’s Engineering Degree or Technical Degree Diploma</p></li><li><p>2-3 year Experience in Data Center Maintenance Field.</p></li><li><p>6+ year Total Experience in Electrical Operations/Maintenance</p></li></ul><p>OTHER REQUIREMENTS:</p><ul><li><p>33KVA License is an added advantage.</p></li><li><p>Data Center Certifications will be added advantage.</p></li></ul><ul><li><p>Ability to prioritize in complex, fast-paced environment.</p></li><li><p>Good problem solving skills and ability to meet demanding time constraints.</p></li><li><p>Excels with ambiguous situations as a chance to show leadership</p></li></ul>

Position Summary<br>We are seeking a skilled Electronic Engineer with 3-4 years of relevant experience who combines strong engineering knowledge with technician-level practical skills. This is a hands-on engineering role that requires experience in assembling, fabricating, testing, and troubleshooting electronic equipment, with the ability to translate engineering designs into fully functional products. The ideal candidate should be comfortable working both in the workshop and the engineering office, supporting the complete product development process from prototype assembly to testing and implementation. You should be equally confident working with engineering drawings, soldering PCB components, wiring control panels, integrating microcontrollers, and developing smart home automation solutions.<br>Key Responsibilities<br>Assemble, fabricate, wire, and test electronic equipment, prototypes, and production units. Build, inspect, repair, and troubleshoot PCB-based electronic systems. Assemble electronic components, control panels, and embedded systems. Install, configure, and test microcontroller-based devices (Arduino, ESP32, STM32, PIC, or similar platforms). Support the development and integration of smart home automation and IoT solutions. Read and interpret electronic schematics, wiring diagrams, PCB layouts, and technical drawings. Understanding schematics and also be able to create power and electrical architecture and drawings on CAD and other simulation platforms. Perform diagnostics, repairs, and root cause analysis on electronic systems and components. Familiarity with at least one of the following tools: KiCad, Easy EDA, or Fritzing. Ability to create simple to moderately complex PCB layouts from schematics. Willingness to learn and be trained on company-specific design processes and tools. Basic understanding of component symbols, footprints, and Gerber file generation is a plus Assist in prototype development, product improvements, and validation testing. Conduct functional, performance, and quality testing before product deployment. Coordinate with engineering, production, and workshop teams to ensure efficient manufacturing and assembly. Maintain engineering documentation, technical records, and test reports. Ensure compliance with company quality, safety, and operational standards.<br>Qualifications Bachelor's Degree in Electronics Engineering, Electrical Engineering, Mechatronics, or a related field.3-4 years of relevant experience in electronics engineering, embedded systems, manufacturing, automation, or product development. Strong practical experience in electronic assembly, wiring, soldering, and equipment fabrication. Hands-on experience working with PCB boards, electronic components, and circuit troubleshooting. Working knowledge of microcontrollers (Arduino, ESP32, STM32, PIC, or similar platforms). Familiarity with smart home automation, IoT devices, sensors, relays, control systems, and home automation protocols. Ability to read and interpret electronic schematics, wiring diagrams, PCB layouts, and engineering drawings. Experience using electronic test equipment such as multimeters, oscilloscopes, power supplies, and soldering/rework stations. Strong analytical, troubleshooting, and problem-solving skills. Excellent communication, teamwork, and organizational skills.<br>Required Skills PCB assembly, soldering, and circuit troubleshooting. Electronic system testing and diagnostics. Microcontroller programming and hardware integration. Smart home automation and IoT systems. Electrical wiring, control panel assembly, and equipment fabrication. Prototype development, product testing, and validation. Knowledge of electronic components, embedded systems, and control circuits. Proficiency in using electronic test equipment and workshop tools. Strong attention to detail and commitment to quality.

Position Summary<br>We are seeking a skilled Electronic Engineer with 3-4 years of relevant experience who combines strong engineering knowledge with technician-level practical skills. This is a hands-on engineering role that requires experience in assembling, fabricating, testing, and troubleshooting electronic equipment, with the ability to translate engineering designs into fully functional products. The ideal candidate should be comfortable working both in the workshop and the engineering office, supporting the complete product development process from prototype assembly to testing and implementation. You should be equally confident working with engineering drawings, soldering PCB components, wiring control panels, integrating microcontrollers, and developing smart home automation solutions.<br>Key Responsibilities<br>Assemble, fabricate, wire, and test electronic equipment, prototypes, and production units. Build, inspect, repair, and troubleshoot PCB-based electronic systems. Assemble electronic components, control panels, and embedded systems. Install, configure, and test microcontroller-based devices (Arduino, ESP32, STM32, PIC, or similar platforms). Support the development and integration of smart home automation and IoT solutions. Read and interpret electronic schematics, wiring diagrams, PCB layouts, and technical drawings. Understanding schematics and also be able to create power and electrical architecture and drawings on CAD and other simulation platforms. Perform diagnostics, repairs, and root cause analysis on electronic systems and components. Familiarity with at least one of the following tools: KiCad, Easy EDA, or Fritzing. Ability to create simple to moderately complex PCB layouts from schematics. Willingness to learn and be trained on company-specific design processes and tools. Basic understanding of component symbols, footprints, and Gerber file generation is a plus Assist in prototype development, product improvements, and validation testing. Conduct functional, performance, and quality testing before product deployment. Coordinate with engineering, production, and workshop teams to ensure efficient manufacturing and assembly. Maintain engineering documentation, technical records, and test reports. Ensure compliance with company quality, safety, and operational standards.<br>Qualifications Bachelor's Degree in Electronics Engineering, Electrical Engineering, Mechatronics, or a related field.3-4 years of relevant experience in electronics engineering, embedded systems, manufacturing, automation, or product development. Strong practical experience in electronic assembly, wiring, soldering, and equipment fabrication. Hands-on experience working with PCB boards, electronic components, and circuit troubleshooting. Working knowledge of microcontrollers (Arduino, ESP32, STM32, PIC, or similar platforms). Familiarity with smart home automation, IoT devices, sensors, relays, control systems, and home automation protocols. Ability to read and interpret electronic schematics, wiring diagrams, PCB layouts, and engineering drawings. Experience using electronic test equipment such as multimeters, oscilloscopes, power supplies, and soldering/rework stations. Strong analytical, troubleshooting, and problem-solving skills. Excellent communication, teamwork, and organizational skills.<br>Required Skills PCB assembly, soldering, and circuit troubleshooting. Electronic system testing and diagnostics. Microcontroller programming and hardware integration. Smart home automation and IoT systems. Electrical wiring, control panel assembly, and equipment fabrication. Prototype development, product testing, and validation. Knowledge of electronic components, embedded systems, and control circuits. Proficiency in using electronic test equipment and workshop tools. Strong attention to detail and commitment to quality.

<p>Key Responsibilities Should be to Read, Write and Speak English Own Visa candidate Order Picking: Retrieve products from inventory shelves according to order slips, barcodes, or electronic warehouse management systems. Quality Assurance: Inspect items for defects, damages, or missing parts before packing. Packaging: Select appropriate boxes, cushioning materials, and containers to ensure products arrive in perfect condition.</p><p>Should be to Read, Write and Speak English Own Visa candidate Attention to Detail: Accuracy in inventory management, order fulfillment, and equipment operation is essential . Time Management: Prioritize tasks efficiently to maintain smooth warehouse operations</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>• To provide professional service to the customers, in terms of accurately recording and organizing quality repair and maintenance services so as to enhance customer retention and after sales revenue giving professional advise to customers on current and future maintenance needs<br>Responsibilities:<br>Functional Roles and Responsibilities<br>• Receive and greet customers, discuss servicing/ repair needs, guide them on assessment &amp; repair of problems/ faults and service requirements based on manufacturer recommendation and when agreed to record the requirement correctly on job card to avoid any ambiguity effecting the quality of repair.<br>• Explain to the customer contents of the job, its value and cost involved. After obtaining confirmation prepare clear and unambiguous work instruction for the technician to carry out the job and keep in constant touch to ensure that work is progressing in proper manner.<br>• Organize inspection upon completion of the job to ensure the quality of the job meets the prescribed standard and to satisfy the customer that the job has been carried out as desired.<br>• Deliver the vehicle in most courteous manner once the job has been completed to the entire satisfaction of the customer and authorities of the workshop so as to ensure continuity of business.<br>• Establish healthy and profitable relationship by proactively communicating and following up with the existing as well as prospective customer on performance of their cars and if they require any service attention so as to consolidate and enhance the customer base.<br>• Keep the customers constantly posted on the status of the back order parts, their actual date and time of arrival to assure customer of the company’s genuine interest in sorting out his problem so as retain customer’s confidence.<br>• Keep customers periodically informed about the work progress and deliver vehicles after collecting the repair charges / LPO/ IPO.<br>• Up sell new accessories, service packages, additional service and participate actively in service campaign.<br>• Upgrade product knowledge through web based training and class room training.<br>• Establish cordial relation with customers and workshop staff.<br>• Follow up on Work In Progress (WIP) targeting closer in 30 days.<br>• Follow-up with customers on long pending vehicles for taking delivery.<br>Qualifications:<br>Education/Certification and Continued Education<br>• Vocational qualification in automotive trade or<br>• Diploma in Automobile Engineering or graduate<br>Years of Experience<br>• 2 -5 years experience in automotive trade</span> </div>

<p>We are looking for a highly skilled&nbsp;<strong>Technician</strong> to join the <strong>FAMCO Construction Equipment</strong> team based in UAE.&nbsp;This role is responsible for delivering high-quality service, maintenance, and repair activities on machinery and equipment, ensuring minimal downtime and maximum customer satisfaction.</p><p>The role involves both workshop and field-based duties, including inspections, diagnostics, repairs, and proactive customer support, while maintaining the highest standards of professionalism, safety, and technical excellence.</p><br><p><strong>What you will do:</strong></p><ul><li><p>Perform removal, installation, disassembly, and assembly of machine components including engines, transmissions, axles, and related systems</p></li><li><p>Carry out advanced troubleshooting, diagnostics, and inspections to identify faults and determine effective repair solutions</p></li><li><p>Conduct machine inspections and customer visits to support service quality and generate additional service revenue</p></li><li><p>Ensure zero customer complaints related to behavior, attitude, or professionalism</p></li><li><p>Manage time and resources effectively to meet deadlines and complete assigned work on time</p></li><li><p>Maintain accurate and timely documentation including job cards, service reports, and time sheets in line with ISO standards</p></li><li><p>Support and guide junior technicians through knowledge sharing and teamwork</p></li><li><p>Adapt to changing work requirements, technology, and operational demands while maintaining performance</p></li><li><p>Uphold high standards of safety, housekeeping, and care of company assets and vehicles</p></li><li><p>Continuously update technical knowledge and skills on new products, systems, and procedures</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong><br>Required skills to be successful:</strong></p><ul><li><p>Strong troubleshooting, diagnostic, and fault-finding skills</p></li><li><p>Hands-on expertise in mechanical, hydraulic, and electrical systems</p></li><li><p>Ability to read and interpret service manuals, schematics, and technical drawings</p></li><li><p>Excellent attention to detail with strong compliance to technical standards and procedures</p></li><li><p>Effective communication and customer-facing skills</p></li><li><p>Strong time management skills with the ability to work under pressure</p></li><li><p>Team-oriented mindset with a proactive approach to knowledge sharing</p></li><li><p>High level of professionalism, discipline, and work ethics</p></li></ul><br><p><strong>About the team:</strong></p><p>You will be part of a dynamic service team supporting heavy equipment operations within FAMCO – CE. The team plays a critical role in maintaining customer satisfaction, service quality, and operational efficiency through collaboration, technical excellence, and adherence to safety and company standards.</p><br><p><strong>What equips you for the role:</strong></p><ul><li><p>Technical Diploma or Certificate in Mechanical, Electrical, or Automotive Engineering</p></li><li><p>Minimum 2–5 years of hands-on experience servicing and repairing heavy machinery or related equipment</p></li><li><p>Proven experience working in both field and workshop environments</p></li><li><p>Valid driving license</p></li><li><p>Basic computer literacy for job reporting and documentation</p></li><li><p>Willingness to work flexible hours as required by operational demands</p></li></ul>

<ul><li><p>Act as first-line systems support for service teams across all branches, answering queries and resolving system-related issues within 48 hours.</p></li><li><p>Resolve front-line blockers same day, including invoice reversals, mileage corrections, discount applications, package amendments and time-clocking issues, directly reducing work in progress and accelerating invoicing.</p></li><li><p>Partner with Aftersales, Finance and IT counterparts to investigate issues, gather information and drive resolutions through to close within agreed timelines.</p></li><li><p>Create and maintain pre-delivery inspection packages, resolving any issues arising from package creation.</p></li><li><p>Build and upload retail service packages for new models, ensuring every package is fully aligned to approved menu pricing with 100% accuracy.</p></li><li><p>Set up and maintain the system for dealer-installed accessories, including package creation, modification and extension across required models.</p></li><li><p>Support campaign rollouts end to end, uploading packages and managing the system throughout the campaign timeline.</p></li><li><p>Upload service advisor shift patterns and technician work schedules so appointment booking and time clocking run smoothly.</p></li><li><p>Maintain master data on backend system tables to keep integrations stable and reporting accurate.</p></li><li><p>Review existing processes and recommend improvements that make operations simpler and faster for front-line teams.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Required Skills to be Successful</p><ul><li><p><strong>Aftersales systems expertise</strong> — hands-on experience supporting or administering an automotive ERP environment, ideally SAP, in a live aftersales setting.</p></li><li><p><strong>Pricing and package management</strong> — proven background as a pricing analyst or pricing assistant, with the ability to build and maintain pricing structures accurately and at pace.</p></li><li><p><strong>Advanced Excel and data management</strong> — confident working with large data sets, running quality checks and maintaining data integrity.</p></li><li><p><strong>Structured problem solving</strong> — able to diagnose an issue quickly, decide what can be fixed now and what needs escalating, and see it through to resolution.</p></li></ul><br><p>What Qualifies You for the Role</p><ul><li><p>Graduate or diploma holder; an automotive background is preferred.</p></li><li><p>Minimum 5 years' experience in a comparable systems support, master data or pricing role.</p></li><li><p>Automotive aftersales experience is essential.</p></li><li><p>A pricing analyst or pricing assistant background is essential.</p></li><li><p>Hands-on ERP experience, ideally with SAP in an automotive environment.</p></li><li><p>Strong Microsoft Office skills, with advanced capability in Excel and solid PowerPoint.</p></li><li><p>Demonstrable experience in data warehousing, data management and data quality control.</p></li><li><p>Excellent written and spoken communication, with the interpersonal skills to support colleagues at every level of a branch network.</p></li><li><p>A customer-focused approach, strong time management and a genuine team-first mindset.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Ghobash Group. For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.</p><br><br>Job Description<br><ul><li>Install, configure, test, commission, and maintain CCTV surveillance systems, including IP and analog cameras, DVRs, NVRs, VMS platforms, and associated equipment.</li><li>Perform preventive and corrective maintenance activities to ensure optimum system performance and reliability.</li><li>Troubleshoot and rectify faults related to CCTV cameras, recording devices, network infrastructure, monitoring stations, and security systems.</li><li>Carry out cable laying, termination, testing, labeling, and documentation for CCTV and security system installations.</li><li>Monitor system performance, verify image quality, and ensure full operational functionality of security surveillance systems.</li><li>Support the integration and maintenance of access control, intrusion detection, and other ELV/security systems where required.</li><li>Coordinate with Security, IT, Operations, and Maintenance teams to resolve technical issues and support system enhancements.</li><li>Prepare maintenance reports, service records, and system documentation in accordance with company procedures.</li><li>Ensure compliance with company HSE policies, permit-to-work requirements, and oil &amp; gas industry regulations while performing all assigned tasks.</li></ul><br>Qualifications<br><ul><li>Diploma or ITI in Electronics, Electrical Engineering, Telecommunications, or a related discipline.</li><li>Relevant certification in CCTV Systems, Security Systems, Networking, or ELV systems is preferred.</li><li>Minimum 3-5 years of experience as a CCTV Technician.</li><li>Experience in Oil &amp; Gas, Petrochemical, Industrial, Power, or Infrastructure projects is preferred.</li><li>Hands-on experience in installation, commissioning, troubleshooting, and maintenance of CCTV and security systems.</li><li>Strong knowledge of IP and Analog CCTV surveillance systems.</li><li>Good understanding of LAN/WAN networks, switches, routers, fiber optic systems, and structured cabling.</li></ul><br>Additional Information<br><ul><li>Strong coordination and communication skills.</li><li>Excellent report preparation and documentation abilities.</li><li>Strong troubleshooting and analytical skills.</li><li>Strong knowledge of material control and inventory management processes.</li><li>Ability to manage multiple priorities and meet deadlines.</li><li>Strong analytical and organizational skills.</li></ul><br><br> </div>

<p>The General Technician is responsible for performing a wide range of technical support tasks to ensure the smooth operation of equipment, machinery, and systems. This role involves troubleshooting, maintenance, and repair activities across various departments and disciplines. The ideal candidate should possess a strong technical background, attention to detail, and problem-solving skills to support day-to-day operations.</p><p>Conduct regular inspections, diagnostics, and troubleshooting of equipment and machinery to identify faults and ensure optimal performance.</p><p>Perform preventive maintenance tasks to ensure equipment is functioning effectively and minimize downtime.</p><p>Maintain and update equipment logs, repair records, and inventory of spare parts.</p><p>Ensure adherence to safety protocols and compliance with regulatory requirements while working with machinery and tools.</p><p>Assist with the installation, calibration, and setup of new equipment and systems.</p><p>Respond promptly to emergency maintenance requests and address technical issues as needed.</p><p>Support the training and guidance of junior technicians or apprentices as required.</p><p>Maintain a clean and organized work environment, ensuring that tools and equipment are properly stored.</p><p>Communicate effectively with other departments to resolve technical issues that may affect production or service delivery.</p><p>Complete requests in timely, accurate, efficient and knowledgeable manner.</p><p>Maintenance of Chillers, Freezers, split units, AHU, fan coils, cold rooms.</p><p>Preventive Maintenance of refrigeration system.</p><p>Preventive maintenance for all kitchen equipment, pumps, air conditioning to be carried out.</p><p>A self-starter, takes initiative, can make decisions in a fast-paced, changing environment.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Reasonably high level of knowledge and skill in Air conditioning, Refrigeration and Electrical.</li><li>Must have the ability to multi-task.</li><li>Should have knowledge and skills to work with Chillers, Freezers, split units, AHU, fan coils, cold rooms.</li><li>Proficient in the English language (verbal &amp; written), second language is an asset.</li><li>Previous experience in the field required.</li><li>Candidates should have a minimum of two years' experience in the same position.</li><li>Ability to repair and maintain A/C air handling units, fan coils and cold storage and refrigerators.</li><li>Knowledge of preventive maintenance procedures and use of test equipment's.</li><li>Proficiency in the above areas and a good foundation in all other areas</li><li>Physical Aspects of Position (include but are not limited to): Frequent standing and walking throughout shift. Lifting and carrying. Frequent kneeling, pushing, pulling, sitting. Occasional ascending or descending ladders, stairs and ramps.</li></ul>

<p>The General Technician is responsible for performing a wide range of technical support tasks to ensure the smooth operation of equipment, machinery, and systems. This role involves troubleshooting, maintenance, and repair activities across various departments and disciplines. The ideal candidate should possess a strong technical background, attention to detail, and problem-solving skills to support day-to-day operations.</p><p>Conduct regular inspections, diagnostics, and troubleshooting of equipment and machinery to identify faults and ensure optimal performance. Perform preventive maintenance tasks to ensure equipment is functioning effectively and minimize downtime. Maintain and update equipment logs, repair records, and inventory of spare parts. Ensure adherence to safety protocols and compliance with regulatory requirements while working with machinery and tools. Assist with the installation, calibration, and setup of new equipment and systems. Respond promptly to emergency maintenance requests and address technical issues as needed. Support the training and guidance of junior technicians or apprentices as required. Maintain a clean and organized work environment, ensuring that tools and equipment are properly stored. Communicate effectively with other departments to resolve technical issues that may affect production or service delivery. Complete requests in timely, accurate, efficient and knowledgeable manner.</p><p>Maintenance of Chillers, Freezers, split units, AHU, fan coils, cold rooms. Preventive Maintenance of refrigeration system. Preventive maintenance for all kitchen equipment, pumps, air conditioning to be carried out.</p><p>A self-starter, takes initiative, can make decisions in a fast-paced, changing environment.</p><p><strong>Desired Candidate Profile</strong></p><p>Reasonably high level of knowledge and skill in Air conditioning, Refrigeration and Electrical. Must have the ability to multi-task. Should have knowledge and skills to work with Chillers, Freezers, split units, AHU, fan coils, cold rooms. Proficient in the English language (verbal &amp; written), second language is an asset. Previous experience in the field required. Candidates should have a minimum of two years' experience in the same position. Ability to repair and maintain A/C air handling units, fan coils and cold storage and refrigerators. Knowledge of preventive maintenance procedures and use of test equipment's. Proficiency in the above areas and a good foundation in all other areas</p><p>Physical Aspects of Position (include but are not limited to): Frequent standing and walking throughout shift. Lifting and carrying. Frequent kneeling, pushing, pulling, sitting. Occasional ascending or descending ladders, stairs and ramps.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Experience: 0–3 years</p><p>Employment Type: Full-time</p><p>Location: UAE</p><p>Job Description</p><p>We are looking for a Cable Pulling &amp; Termination Technician to join our team and support our low-current and ELV infrastructure projects.</p><p>Our company specializes in CCTV installation, access control, structured cabling, data points, and other ELV/infrastructure works. The candidate will be responsible for cable installation, pulling, termination, labeling, testing, and general site support.</p><p>Key Responsibilities</p><ul><li>Pull and install network, data, CCTV, access control, and other ELV cables.</li><li>Perform cable termination for RJ45, patch panels, keystone jacks, access control devices, CCTV equipment, and related systems.</li><li>Properly label cables, outlets, patch panels, and equipment.</li><li>Follow cable routes, drawings, and site instructions.</li><li>Maintain neat and organized cable dressing and routing.</li><li>Assist with testing and troubleshooting of network and ELV cabling.</li><li>Support installation of CCTV, access control, data points, and related infrastructure.</li><li>Ensure cables are properly secured, dressed, and protected.</li><li>Maintain good housekeeping and follow site safety requirements.</li><li>Coordinate with supervisors and other site teams to complete work on schedule.</li></ul><p>Requirements</p><ul><li>0–2 years of experience in cable pulling, termination, structured cabling, or ELV works.</li><li>Basic knowledge of network/data cabling and cable termination.</li><li>Experience with CCTV, access control, data points, or similar ELV systems is an advantage.</li><li>Ability to use basic cabling tools and equipment.</li><li>Ability to understand basic drawings, cable schedules, and labeling systems.</li><li>Physically fit and willing to work on construction/project sites.</li><li>Good attitude, punctuality, and willingness to learn.</li><li>SIRA experience or SIRA certification is preferred.</li><li>Previous Etisalat-related / telecom infrastructure experience is an advantage.</li><li>UAE site experience is preferred.</li></ul><p>Preferred Skills</p><ul><li>Cat5e/Cat6/Cat6A cable installation</li><li>RJ45 and patch-panel termination</li><li>Cable labeling and dressing</li><li>Cable testing using basic testers</li><li>CCTV cabling</li><li>Access control cabling</li><li>Structured cabling</li><li>ELV/low-current infrastructure</li></ul><p>What We Offer</p><ul><li>Full-time employment</li><li>Salary based on experience and skills</li><li>Opportunity to work on CCTV, access control, structured cabling, and ELV infrastructure projects</li><li>Training and opportunity for career development</li></ul><p>Candidates with hands-on cabling experience and a willingness to learn are encouraged to apply.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Cat5e/Cat6/Cat6A cable installation</li><li>RJ45 and patch-panel termination</li><li>Cable labeling and dressing</li><li>Cable testing using basic testers</li><li>CCTV cabling</li><li>Access control cabling</li><li>Structured cabling</li><li>ELV/low-current infrastructure</li></ul><p><br></p></div>

<ul><li><p>As an L1 IT Support Technician, you will be the first point of contact for end-users seeking technical assistance. You will be responsible for diagnosing and resolving basic technical issues, ensuring that user inquiries are handled promptly and efficiently. Your role is crucial in maintaining user satisfaction and ensuring the smooth operation of IT services. Additionally you will be required to set up, operate, maintain, and troubleshoot audio and visual equipment for various events, meetings, and presentations Key Responsibilities: · Provide First-Line Support: Answer incoming support requests via phone, email, or helpdesk system and provide immediate assistance for basic technical issues. · Troubleshoot Basic Problems: Resolve common issues such as password resets, software installations, account unlocks, and connectivity issues. · Log and Track Issues: Accurately record all user interactions, issues, and resolutions in the ticketing system, ensuring proper documentation. · Escalate Complex Issues: Identify issues that require more in-depth analysis or specialized knowledge and escalate them to L2 support while providing all relevant information. · User Guidance: Assist users with navigating IT systems and software applications, providing clear instructions and support. · Maintain Documentation: Utilize existing knowledge base articles to resolve issues and contribute to the improvement and updating of support documentation. · Follow-Up: Ensure that users are informed about the status of their issues and follow up on unresolved tickets to ensure timely resolution. · Adhere to SLAs: Meet established Service Level Agreements (SLAs) for response times and issue resolution. · Work on L1 for other backend systems: Fusion ERP, Banner ERP, Black Board, SMS, SAP BI, Google Dialog, </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Education: Bachelor of Engineering or Master of Science in IT, additional certifications in IT support or customer service are a plus. · Experience: Previous experience in a customer service or IT support role is preferred. · Technical Skills: Basic understanding of computer systems, software, and network connectivity. · System Skills: Experience in Fusion HCM, Banner, Integration, Reporting, Black Board · Communication: Strong verbal and written communication skills, with the ability to explain technical concepts to non-technical users. · Problem-Solving: Ability to diagnose and resolve basic technical issues efficiently. · Team Player: Willingness to collaborate with other team members and escalate issues as needed. Working Conditions: · Schedule: May include shifts, including nights and weekends, depending on company needs. · Environment: Primarily office-based, with some remote support depending on the role. </p></li></ul>

<p>The Mechanical Technician performs a variety of skilled and semi-skilled tasks pertaining to the installation, maintenance, repair and service of the electrical and mechanical equipment, instruments and provide technical staff support to operations. Responsibilities: Ensures compliance with safety requirements and liaison and coordination with other Departments as required. Manages and ensures mechanical spare parts availability for scheduled and projected jobs. Knowledge of Statutory Regulations and Health and Safety Equipment Problems Trouble-shooting Basic Equipment Operation Basic Root Cause Analysis Ensures equipment, materials and tools are on-hand for work execution. Reports resources and time utilized, job scope expansion, rework or deferred maintenance as required; also keeping all tasks & activities logged and up-dated. Assists in preparing maintenance activities for execution, ensuring permits, tools, materials and equipment in place in accordance with maintenance schedules. Ensures maintenance activities are carried out in accordance with client and industry standard policies and procedure. Inspects, maintains, troubleshoots, repairs and service facilities, machinery and equipment. Upholds with organization Safety and QA/QC procedures and strictly enforces them amongst the workforce. Performs corrective mechanical maintenance by troubleshooting the cause of malfunctions using visual inspection and precision measuring and testing instruments and replacing or repairing broken parts Maintains effective Health and Safety systems, including completion of risk assessments and method statements and tool box talks where appropriate. Adheres to safety orders and comply with OSHA regulations in all aspects of work. Operates and maintains a variety of hand and power tools used in the performance of assigned duties Lead man in the inspection, checking, preparation and implementation of the mechanical work. Monitors mill operation and other related mechanical activities to troubleshoot problems to minimize downtime. Implement lubrication and other preventive maintenance work. Coordinate with other departments in the implementation of maintenance work</p><p>Educational Level: Diploma in Mechanical Engineering or sufficient extensive field experience and/or trainings. Qualifications: Excellent interpersonal and communication skills. Time management: the ability to organize and manage multiple deadlines. Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gloves, ... etc Experience 3 - 10 years’ experience in a similar role in an industrial plant/Oil & Gas, including preferably at least 2 years in a similar role in a Desalination/RO Plant.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Sofitel Al Hamra Beach Resort</p><br><br>Job Description<br><br><p>We're looking for a detail-oriented and reliable Kitchen Technician to join our team in Ras Al-Khaimah, United Arab Emirates. In this role, you'll be the backbone of our kitchen operations, ensuring that all equipment runs smoothly and efficiently. You'll work collaboratively with kitchen staff and management to maintain a safe, compliant, and productive food service environment. Your technical expertise, problem-solving abilities, and commitment to excellence will directly impact our operational success and customer satisfaction.</p><br><ul><li>Perform routine maintenance and preventive inspections on all kitchen equipment and appliances to ensure optimal performance and reliability</li><li>Troubleshoot and diagnose mechanical, electrical, and refrigeration issues with precision and analytical thinking</li><li>Respond promptly to equipment breakdowns and emergency repair requests, minimizing downtime and operational disruptions</li><li>Maintain detailed records of all maintenance activities, repairs, equipment status, and service history for compliance and tracking purposes</li><li>Ensure all work adheres to safety, health, and operational standards established by the organization and local regulations</li><li>Coordinate effectively with kitchen staff to communicate maintenance schedules and minimize impact on daily operations</li><li>Monitor and maintain critical systems including refrigeration units, ventilation systems, and food service equipment</li><li>Assist in the installation, testing, and commissioning of new kitchen equipment</li><li>Manage inventory of spare parts, tools, and maintenance supplies, ensuring availability and organization</li><li>Stay current with industry best practices and equipment innovations to continuously improve maintenance processes</li></ul><br>Qualifications<br><br><ul><li>Proven experience in kitchen equipment maintenance, building maintenance, or related technical field</li><li>Strong technical knowledge of mechanical, electrical, and refrigeration systems</li><li>Hands-on experience troubleshooting and repairing commercial kitchen appliances and equipment</li><li>Relevant technical certifications (HVAC, electrical, appliance repair, or equivalent) preferred</li><li>Excellent problem-solving and analytical skills with the ability to diagnose complex equipment issues</li><li>Strong interpersonal and communication skills to collaborate effectively with kitchen staff and management</li><li>Demonstrated reliability, responsibility, and commitment to maintaining high safety and compliance standards</li><li>Proficiency in maintaining detailed maintenance records and documentation</li><li>Physical capability to perform manual work, including lifting, bending, and working in various positions</li><li>Time management skills with the ability to prioritize multiple tasks and respond to urgent repair requests</li><li>Knowledge of food service industry standards and safety regulations</li><li>Ability to work independently and as part of a collaborative team</li><li>Flexible and adaptable approach to changing operational needs</li><li>Valid driver's license (preferred for equipment procurement and service calls)</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Al Gahwa Al Arabiya L.<br>L.C SPC Position: Production Helper / Packing Helper / Roasting Helper Department: Production Location: Al Dhafra Region, Madinat Zayed, Abu Dhabi, UAE Al Gahwa Al Arabiya L.<br>L.C SPC is looking for experienced and hardworking candidates to join our Production Department .<br> Benefits The company will provide employment benefits in accordance with UAE labour laws and company policy .<br> Location Al Dhafra Region, Madinat Zayed, Abu Dhabi, UAE Immediate joiners are encouraged to apply.<br> Interested candidates may submit their CV to: Requirements Minimum 2–3 years of relevant experience in a Food &amp; Beverage, Coffee Roastery, Food Production, or similar company .<br> Experience in production, packing, roasting, or general food-processing activities is preferred.<br> Ability to work in a fast-paced production environment.<br> Good teamwork, discipline, and willingness to learn.<br> Candidates who can join immediately are highly preferred.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking an Air Diver (IMCA) to join our client's offshore subsea operations team on a permanent rotational basis (60 days on / 30 days off). This is a vessel-based offshore role supporting subsea inspection, maintenance, repair, and light construction activities across offshore projects in the UAE.<br></p><br><p>You will be responsible for executing safe and efficient air diving operations as part of an offshore dive team, working under the direction of the Dive Supervisor. The role involves performing underwater inspection, maintenance, repair, and installation activities while ensuring full compliance with IMCA D 014, ADNOC diving requirements, and company diving management systems.<br></p><br><span><b><span>Key Responsibilities</span></b></span><br>- Perform offshore air diving operations within approved depth limits in support of subsea inspection, maintenance, repair, installation, and light construction activities.<br><br>- Carry out underwater tasks including structural inspections, cathodic protection (CP) measurements, marine growth removal, bolt replacement, anode installation, and other subsea maintenance activities.<br><br>- Perform duties as a working diver, standby diver, or bellman/tender as assigned by the Dive Supervisor, ensuring full compliance with approved dive procedures.<br><br>- Conduct pre-dive inspections of diving equipment, breathing systems, communication equipment, and personal protective equipment, confirming operational readiness before each dive.<br><br>- Maintain continuous communication with Dive Control throughout diving operations, providing updates on underwater conditions, work progress, and any safety concerns.<br><br>- Execute diving activities in accordance with approved dive plans, maintaining strict adherence to depth limitations, bottom times, decompression schedules, and emergency procedures.<br><br>- Assist with the preparation, rigging, operation, and maintenance of the dive spread, Launch and Recovery System (LARS), compressors, umbilicals, and associated diving equipment.<br><br>- Participate in pre-job planning meetings, risk assessments, toolbox talks, Job Safety Analyses (JSA), and daily safety briefings to ensure safe execution of diving operations.<br><br>- Support post-dive debriefings by providing operational feedback and assisting with the completion of dive logs, maintenance records, and daily operational reports.<br><br>- Maintain diving equipment in a safe and serviceable condition, promptly reporting defects, equipment failures, or safety concerns to the Dive Supervisor.<br><br>- Promote compliance with company HSE procedures, IMCA guidelines, client requirements, and international offshore diving standards while contributing to a strong safety culture onboard.<br><br><br><span>Requirements-&nbsp;HSE Part IV Air Diving qualification or an equivalent internationally recognised commercial diving qualification.<br><br>- IMCA D 014 compliant commercial diving qualification is mandatory.<br><br>- 3–7 years of offshore operational air diving experience within subsea construction, inspection, IRM, or offshore oil &amp; gas projects.<br><br>- Experience performing subsea inspection, marine growth removal, cathodic protection (CP) surveys, light construction, and underwater maintenance activities.<br><br>- Strong understanding of offshore diving operations, decompression procedures, diving equipment, and IMCA safe diving practices.<br><br>- Ability to work effectively within a multidisciplinary offshore dive team in demanding operational environments.<br><br>- Strong commitment to safety, teamwork, and compliance with offshore operational procedures.<br><br><span><span>Certifications (Please attach below certificates)</span></span><br>- IMCA D 014 compliant commercial diving qualification (mandatory).<br><br>- ADNOC Diving Approval, or a demonstrated ability to obtain it.<br><br>- Valid Offshore Medical (HSE, OGUK, or equivalent).<br><br>- Valid BOSIET or HUET certification.<br><br>- First Aid at Work certification.<br><br>- Diver Medic Technician (DMT) certification is advantageous.<br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br>- Permanent rotational employment with a leading offshore subsea engineering organization<br><br>- Opportunity to work on major ADNOC offshore inspection, IRM, and subsea construction projects<br><br>- Exposure to advanced offshore diving operations, vessel-based campaigns, and IMCA-compliant diving systems<br><br>- Opportunity to develop expertise across subsea inspection, underwater maintenance, and offshore construction activities<br><br>- Long-term career growth within a stable organization supporting complex offshore and subsea operations<br><br><span><span>HOW TO APPLY</span></span><br>- Submit your CV along with a copy of your relevant certificates.&nbsp;<br><br></span><p>Shortlisted candidates will be contacted within 5 working days of application.<br></p><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Subsea Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br><br> </div>

<p>Job Purpose To lead sales growth and market expansion for FMCG food products (Milk Powder, Jam, Tomato Paste) across Africa, GCC, and other international regions by developing new markets, acquiring new customers, and managing existing business relationships to achieve company targets. Core Criteria Overview 1. Open new markets (not just maintain existing ones). 2. Understand African business culture and logistics. 3. Build and manage distributor networks. 4. Handle export documentation, pricing, and payment terms. 5. Represent the company professionally and grow the brand regionally. Market Experience & Regional Knowledge Must have prior experience selling to African markets (North, West, or East Africa). 1. Preferably in FMCG food or dairy sectors. 2. Understands import regulations, trade barriers, and logistics routes for Africa. 3. Familiar with distribution structures (importers, wholesalers, sub-distributors). 4. Knows how to adapt pricing and product strategy for markets with currency and demand variations. Product-Specific Experience Experience in FMCG food categories, and knowledge of competitors especially: 1. Milk powder / dairy (understanding of reconstitution, packaging formats, and shelf-life). 2. Tomato paste & jam (familiarity with tin, sachet, and jar packaging formats). 3. Evaporated milk (future line). Distributor Development Skills. Must know how to: 1. Identify and appoint reliable distributors or agents. 2. Negotiate trade terms (pricing, credit, and marketing support). 3. Establish exclusive agreements with performance clauses. 4. Support distributors in sales planning, stock management, and local promotions. Sales & Business Development Competence. Proven ability to: 5. Prospect new customers and expand distribution networks. 6. Negotiate and close large-volume contracts. 7. Prepare sales forecasts and annual budgets. 8. Achieve or exceed export sales targets. Export Process & Documentation Knowledge. Understanding of: 1. Incoterms, LC (Letter of Credit), CAD, advance payments, and credit terms. 2. Shipping documentation (Invoice, Packing List, Certificate of Origin, Bill of Lading, etc.). 3. Product registration requirements (especially for dairy products in African countries). 4. Coordination with logistics, finance, and customs clearance agents. Language & Communication: 1. English: Essential (for East & Anglophone Africa) 2. French: Highly preferred (for West & North Africa) 3. Arabic: Advantageous (for North Africa & GCC coordination) Cultural Awareness & Adaptability. Must be able to: 1. Travel frequently and adapt to different African business environments. 2. Respect local business etiquette, timing, and negotiation styles. 3. Handle diverse challenges (logistics delays, pricing volatility, import regulations). Commercial & Analytical Skills. Should be able to: 1. Analyze market trends, competitor pricing, and consumer behavior. 2. Recommend pricing strategies and promotional activities. 3. Understand profit margins, trade costs, and cost-to-serve per market.</p><p>Required Qualifications: 1. Bachelor Degree in Business, Marketing, or International Trade. 2. Minimum 4? 6 years of export sales or business development experience in the FMCG / food sector. 3. Proven record of opening new markets and acquiring new customers in Africa or GCC. 4. Strong network of distributors or importers in the region is an advantage.</p>

<div><p>Would you like to be part of the most international company in the world? A company operating in more than 220 countries worldwide and has been pioneering cross-border express shipping since 1969.  Would you like to be part of a business that connects people across the globe and want to make a difference? Then waste no time and join our amazing team at DHL Group. DHL Global Forwarding, Freight (DGFF) is the Group's air, ocean, and road freight specialist. We offer standardized transport as well as highly specialized end-to-end solutions to customers in a wide range of industries globally.</p><p><em>Who ever said ‘‘the sky is the limit’’ never spoke to you! Because for you it’s the beginning</em> <em>., </em><strong>- DHL Global Forwarding</strong> has an opening for a <strong>Warehouse Assistant II </strong>in<strong> Dubai, United Arab Emirates. </strong>Support administration of warehouse and manual handling plans and processes to provide smooth operations for forklift operations, material handling and ground operations activities including movement, storage and inventory control; stacking, loading or unloading materials, finished goods, tools; packaging of materials and maintenance of existing inventories in line with the business strategy and requirements, corporate guidelines and policies</p> <p>Join us in connecting people and improving lives!</p> <p><strong>In this Warehouse Assistant II position</strong></p> <ul><li>Under supervision receive goods, accurately sort, label and store goods ensuring optimization of warehouse space</li><li>Under supervision verify items against the record of shipment, and inspect condition for damages/ defects, update received and shipped items according to established procedures</li><li>Ensure proper routing of materials is maintained while transporting the materials between departments</li><li>Verify and pack items for shipment according to specifications and the applicable transportation method</li><li>Comply with established procedures to maintain and log the movement of incoming and outgoing materials and products</li><li>Perform order fulfilment based on customer requirements</li><li>Retrieve stored information, place orders or respond to enquiries such as inventory levels or delivery schedules</li><li>Resolve recurring issues faced during delivery as per defined processes, systems and methods</li><li>Undertake generally repetitive tasks related to movement, tools, and packaging (e.g. pickers and packers)</li><li>Pack items for shipment according to specifications</li><li>Under supervision receive goods, scan and verify items against the shipment record</li><li>Undertake generally repetitive tasks to consolidate transshipment and sorting activities (e.g. within sorting centers)</li><li>Under supervision support operate gas or electric powered forklift truck to move, stack, stage, load or unload materials, parts, finished goods, etc. and may use a hi-rise to load items in storage racks</li><li>Verify and process applicable documentation during package/ freight pick-up or arrival at warehouse</li><li>Under supervision operate a scanner to process all incoming and outgoing shipments</li><li>Comply with established procedures to arrange daily pick-up schedules and dispatch pick-up delivery information in a timely and efficient manner</li><li>Ensure forklifts and equipment are properly checked, used and maintained on a daily basis</li><li>Support general admin tasks related to shipment processing and documentation, sending status information and accepting/ securing over-the-counter payments</li><li>Answer basic queries from customer service and sales for shipment tracking and resolve issues related to misplaced shipments</li><li>Stay updated with the methods of use of all equipment and obtain related certifications for loading, unloading and material handling equipment</li></ul><p><strong>Stakeholders:</strong>  </p><ul><li>Explain facts, practices, policies, etc. to others within the organization adhering to narrowly defined procedures, standards and guidelines</li><li>Support and interact primarily with colleagues of own team</li><li>Communicate information that requires some explanation or interpretation</li><li>Address task-related issues appropriately to maintain work relationships</li></ul><p><strong>Management Responsibility</strong></p><ul><li>Individual contributor without direct responsibility for leading others</li></ul><p><strong>Now, here is what we need from you!</strong></p><table><tbody><tr><td><p><strong>Education Level</strong></p></td></tr><tr><td><p>·       Vocational/Specialized/Technical/Certification</p></td></tr><tr><td> </td></tr><tr><td><p><strong>Experience Level</strong></p></td></tr><tr><td><p>·       less than 2 years</p></td></tr></tbody></table> <p><strong>We offer:</strong></p><ul><li>Opportunities in a global company where you can contribute your ideas and skills to move towards our shared goals.</li><li>Possible further career development</li><li>Competitive salary</li></ul><p><strong>Why join DHL Global Forwarding?</strong></p> <p>We are part of DHL Group, the world’s leading logistics provider with operations in over 220 countries. Visit our career site on the web at <a href="https://www.logistics.dhl/us-en/home/careers.html">https://www.logistics.dhl/us-en/home/careers.html</a></p> <p>Our <strong>TOP EMPLOYER prestigious certification</strong> attests to our best-in-class efforts to attract and retain talent by fostering a positive work environment and encouraging personal and professional development among employees. The development of talented women in our organization is an ongoing key focus area.</p> <p>We aspire to become the undisputed leader in our industry, <strong>when people think of forwarding; we want them to think DGF </strong>because we have:</p> <ul><li>The<strong> largest global network</strong> with more than 30,000 passionate employees</li><li>The most <strong>efficient processes</strong> and <strong>fastest response times</strong></li><li>The <strong>best solutions</strong> and <strong>best customer service</strong></li></ul> <p><strong>Our Vision:      </strong>The Logistics Company for the World.</p><p><strong>Our Mission:    </strong>Excellence. Simply Delivered.<br><strong>Our Purpose:   </strong>Connecting People, improving lives.<br><strong>Our Values:     </strong>Respect & Results<br><strong>Our Goals:       </strong>Employer, Provider, and Investment of Choice, Living Responsibility</p> <p><em>DHL Global Forwarding is an equal opportunity employer.  We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.</em></p></div>

<ul><li><p>Manage store operation of allotted Shift</p></li><li><p>Ensure timely order picking, packing, and dispatching within defined SLAs.</p></li><li><p>Maintain Inventory Accuracy – bin level or item level</p></li><li><p>Optimize workflow to improve operational efficiency and productivity.</p></li></ul><ul><li><p>Ensure proper training on SOPs and safety procedures.</p></li></ul><ul><li><p>Handle escalations effectively and ensure customer satisfaction.</p></li></ul><ul><li><p>Ensure compliance with company SOPs and safety regulations.</p></li><li><p>Maintain a clean and organized workplace (5S).</p></li><li><p>Ensure compliance with food safety standards where applicable.</p></li></ul><ul><li><p>Implement productivity improvement projects.</p></li></ul><ul><li><p>Prepare daily, weekly, and monthly operational reports.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>5- 8 years of Similar type of Operation</p></li><li><p>Minimum 2–3 years managing a dark store/ Stores</p></li></ul><br><p><strong>Required Qualifications</strong></p><ul><li><p>Bachelor’s degree in supply chain, Logistics, Business Administration, or a related field.</p></li></ul>

At Julphar, we are on a journey of culture transformation & our mission is to provide a better quality of life for the entire family by delivering best in class solutions and real value with compassion and professionalism.<br><br>Our core values: Respect, Collaboration, innovation, Integrity and Compassion - Combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to make a positive impact on the lives of the patients we serve, enable Talents , create a healthy work environment, and accomplish our goals through world-class research and with the compassion and commitment of our employees.<br><br>Job Summary<br><br>The Equipment Maintenance Engineer will be a key member of the engineering team, responsible for performing preventive maintenance, troubleshooting equipment breakdowns, and ensuring optimal performance of sterile plant machinery. This role involves interpreting technical data, providing cost and time estimates, testing systems, and evaluating equipment, components, and systems to meet business requirements. The ideal candidate is passionate about technology, excels in problem-solving, can prioritize tasks effectively, and delivers work within strict deadlines.<br><br>Key Responsibilities<br><br>Adhere to and maintain c GMP principles while providing engineering support and maintenance activities. Ensure repair and maintenance activities align with company policies, goals, and equipment performance requirements. Monitor and enforce all safety protocols within the Engineering Section. Manage maintenance for sterile production and packaging equipment, including but not limited to:Freeze Dryer Ampoules & Vials Washing Machines Dry Hot Air Sterilizing Tunnel Ampoule & Vial Filling and Sealing Machines Continuous Motion Vial Closing Machines Labelling Machines Ultrasonic Cleaning Machines Washing Machines for Change Parts Steam Sterilizing Autoclaves Semi-Automatic and Fully Automatic Inspection/Closing Machines Cartoners Perform planned preventive maintenance to minimize downtime and maximize equipment efficiency. Overhaul and upgrade aging equipment when necessary. Ensure compliance with GAMP and c GMP standards. Maintain equipment as per manufacturer’s instructions and support recommendations. Inspect and implement corrective actions during equipment breakdowns. Generate work completion reports, logbooks, and daily activity reports. Track notifications and job orders through SAP, coordinating with the SAP Coordinator for timely completion. Provide technical support and training on new equipment, ensuring staff are adequately trained. Assist other departments by defining equipment specifications and providing engineering solutions. Monitor spare parts inventory, ensuring timely procurement when minimum levels are reached.<br>Qualification<br><br>B. Sc. in Mechatronics Engineering or Electronics Engineering with strong knowledge of Mechanical Engineering.<br><br>Experience<br><br>5–10 years of experience in pharmaceutical or food industries, with hands-on knowledge of sterile equipment and electronics.<br><br>Requirements & Skills<br><br>In-depth knowledge of all types of sterile equipment, including operations and components. Strong understanding of pharma machinery installation, preventive and corrective maintenance. Expertise in mechanical, electronics, pneumatic, and hydraulic systems. Ability to combine mechanical and electronics engineering expertise effectively. Strong knowledge of GED (Good Engineering Documents) and maintenance documentation. Competence in preventive/corrective maintenance planning and implementation. Experience in critical spare parts management and inventory control. Proficiency in English (written and spoken) and MS Office (Excel, Word, etc.). Positive attitude, strong analytical skills, and ability to encourage and motivate team members. Familiarity with SAP and EQMS systems.<br><br>We value people from different backgrounds. Could this be your story? Apply today or visit www. Julphar.net to read more about us and the journey of Julphar